Haier HLT71 User Manual - PDF Document
Contents
1. aler USER MANUAL HLT71 7 DIGITAL LCD TV IMPORTANT READ THESE INSTRUCTIONS BEFORE USE AND RETAIN FOR FUTURE REFERENCE SAFETY INFORMATION DO NOT REPAIR YOURSELF REFER SERVICING TO QUALIFIED PERSONNEL THIS DEVICE IS INTENDED FOR CONTINUOUS OPERATION TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK AND ANNOYING INTERFERENCE USE THE RECOMMENDED ACCESSORIES ONLY WARNING TO PREVENT FIRE OR SHOCK HAZARD DO NOT USE THIS PLUG WITH AN EXTENSION CORD RECEPTACLE OR OTHER OUTLET UNLESS THE BLADES CAN BE FULLYINSERTED TOPREVENT BLADE EXPOSURE TO PREVENT FIRE OR SHOCK HAZARD DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE VENTILATION WARNING THE NORMAL VENTILATION OF THE PRODUCT SHALL NOT BE IMPEDED FORINTENDEDUSE THE MAINS PLUG IS USED AS DISCONNECT DEVICE THE DISCONNECT DEVICE SHALL REMAIN READILY OPERABLE RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER OR BACK NO USER SERVICEABLE PARTS INSIDE REFER SERVICING TO QUALIFIED SERVICE PERSONNEL The lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of uninsulated dangerous voltage within the product s en closure that may be of sufficient magnitude to constitute a risk of electric shock to persons The exclamation point within an equilateral triangle is intended2. e Note this ATSC8 Analog TV receiver can store the channels from 2 69 and the maximum of each channel has 8 programs To select the desired programs by using button and numeric buttons Do as follows To select CH 13 NO 2 Press 1 and 3 then press and input 2 Once the input is done it wil start broadcasting the selected channel immediately ADJUST THE VOLUME Too loud the voice will damage your ears to adjust the volume use the VOLUME UP DOWN buttons on the main unit or on the remote control AUDIO EFFECT OPTIONS This TV set is with two speakers inside the front panel which are enabled immediately it is powered on TV SETTING MENU Press TV AV button on the remote or MODE button on the main unit to select TV mode then Press once the MENU button the screen will pop up a setting menu use the NAVIGATION LEFT RIGHT buttons to select among the setting options then press NAVIGATION UP DOWN button to enter the sub menu again use NAVIGATION LEFT RIGHT button to select the desired option or adjust and press OK ENTER Button to confirm the item to be set Press MENU button to go to previously menu and press EXIT button to exit the menu interface Picture Mode 4 Persona Contrast C G2 Brightness a 53 gt Sharpness a 50D Tint m gt Color a 60 gt Menu Language 4 English Color Mode 4 Normal Zoom Mode 4 Wide Closed Caption Restore Setting y vo vu voy av UP DOWN ADJUST MENUEXIT Pic
3. plug is damaged liguid has been spilled or objects have fallen into the apparatus the apparatus has been exposed to rain or moisture does not operate normally or has been dropped 14 This appliance shall not be exposed to dripping or splashing water and that no object filled with liguid such as vases shall be placed on the apparatus NOTE This equipment has been tested and found to comply with the limits for a Class B digital device pursuant to Part 15 of the FCC Rules These limits are designed to provide reasonable protection against harmful interference in a residential installation This equipment generates uses and can radiate radio frequency energy and if not installed and used in accordance with the instructions may cause harmful interference to radio communications However there is no guarantee that interference will not occur in a particular installation If this equipment does cause harmful interference to radio or television reception which can be determined by turning the equipment off and on the user is encouraged to try to correct the interference by one or more of the following measures Reorient or relocate the receiving antenna Increase the separation between the equipment and receiver Connect the equipment into an outlet on a circuit different from that to which the receiver is connected Consult the dealer or an experienced radio TV technician for help The manufacturer is not responsible for an
4. to alert the user to the presence of important operating and main tenance servicing instructions in the literature accompanying the appliance IMPORTANT SAFETY INSTRUCTIONS 1 Read these instructions 2 Keep these instructions 3 Heed all warnings 4 Follow all instructions 5 Do not use this apparatus near water 6 Clean only with dry cloth 7 Do not block any ventilation openings Install in accordance with the manufacture s instructions 8 Do not install near any heat sources such as radiators heat registers stoves or other apparatus including amplifiers that produce heat 9 Do not defeat the safety purpose of the polarized or grounding type plug A polarized plug has two blades with one wider than the other A grounding type plug has two blades and a third grounding prong The wide blade or the third prong are provided for your safety If the provided plug does not fit into your outlet consult an electrician for replacement of the obsolete outlet 10 Protect the power cord from being walked on or pinch particularly at plugs convenience receptacles and the point where they exit from the apparatus 11 Only use attachments accessories specified by the manufacturer 12 Unplug this apparatus during lightening storms or when unused for long periods of time 13 Refer all servicing to gualified service personnel Servicing is reguired when the apparatus has been damaged in any way such as power supply cord or
5. IMPLIED WARRANTIES INCLUDING THE WARRANTIES OF MERCHANT ABILITY AND FITNESS FOR USE ARE LIMITED TO THE PERIOD s FROM THE DATE OF PURCHASE SET FORTH BELOW Some states do not allow limitations on how long an implied warranty lasts so the above limitation may not apply to you Neither the sales personnel of the seller nor any other person is authorized to make any warranties other than those described herein or to extend the duration of any warranties beyond the time period described herein on behalf of Haier The warranties described herein shall be the sole and exclusive warranties granted by Haier and shall be the sole and exclusive remedy available to the purchaser Correction of defects in the manner and for the period of time described herein shall constitute complete fulfillment of all abilities and Responsibility of Haier to the purchaser with respect to the product and shall constitute full satisfaction of all claims whether based on contract negligence strict duality or otherwise In no event shall Haier be liable or in any way responsible for any damages or defects in the product which were caused by repairs or attempted repairs performed by anyone other than an authorized service center or dealer nor shall Haier be liable or in any way responsible for incidental or consequential economic or property damage Some states do not allow the exclusion of incidental or consequential damages so that above exclusion may not a
6. elect the broadcasting program provides closed caption There are three options as below CC mode use to select on CC on Mute off Basic Selection select among from CC1 Cc2 CC3 CC4 Text1 Text2 Text3 and Text4 Advance Selection service 1 Service 2 Service 3 Service 4 Service 5 Service 6 Restore Setting select this option to restore the factory setting Antenna 4 Air Auto Scan Show Hide Favorite Channel No 4 Channel Label av UP DOWN ADJUST MENU EXIT vo o vo vv v Antenna it is used to select the Antenna type CATV or air Auto Scan use this function to auto scanning and stored tuned channels Select auto scan option then press NAVIGATION RIGHT button to access the submenu select the desired Cable system and then enter the auto scan option to begin auto scan Show Hide it is used to show or hide the programs according to your own favorite Favorite it is used to select your favorite programs Channel NO Select the desired program from this option Channel Label it is used to edit the name of the selected program Connecting to the DVD VCD AV terminals To power outlet To video input connector yellow To audio input connectors red white Video audio cable Symptom Remedy Possible of causes No picture and sound Check the power supply Check the power switch and make sure it is at the ON position No picture Make sure the channel i
7. l amp muted audio 2 PICTURE Press this button to select the picture display effect between Dynamic soft personal or standard 3 MTS Press to select the audio output language during DTV mode if there are multi languages available during ATV mode press this button to select audio output like mono 8 stereo 4 MENU Press this button to access the menu interface 5 SLEEP Use to auto power off by setting sleep timer 6 NAVIGATION buttons Press to select the options under OSD setting interface or alter the settings in a menu 7 0 9 Enter numeric values and to select the channel or program directly by entering its number 8 gt Press to go to previously selected channel 9 VOL Press this button to decrease the speaker volume 10 POWER Press this button to set the player to standby on or off state If the main power of the set is on 11 ZOOM Used to select the desired display mode wide or normal 12 EXIT Exit the menu interface 13 EPG Press this button to skim over TV programs guide 14 OK ENTER Confirm the selection 15 TV AV Select the desired signal input mode 16 INFO Press this button to display current program information 17 CH Press this button to increase the channel number 18 CH Press this button to decrease the channel number 19 Used to directly input TV channels 20 VOLUME Press this button to increase the speaker volume HOW TO USE ANTENNA Directly connect ex
8. pply to you THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS YOU MAY ALSO HAVE OTHER RIGHTS WHICH VARY FROM STATE TO STATE Warranty period for this product 90 days for Labor one year for parts Additional items excluded from warranty coverage non rechargeable batteries Where to obtain service For the location of the nearest Haier authorized service center or to obtain product literature accessories supplies or customer assistance please call 1 877 337 3639 What to do to obtain service ship or carry in your product to an authorized service dealer or center Be sure to have proof of purchase If you ship the product be sure it ispackaged carefully Haier America New York NY 10018
9. rmal noise or odor comes out of your TV monitor switch off the power immediately and cail your service center Never try to repair the TV monitor yourself Always call your service center or a qualified technician to fix it Do not watch during driving it is dangerous and is illegal Note This user s manual contains graphics and information that is for reference purposes only and is subject to change without notice Power requirements You may use the DC adaptor or the Cigarette lighter adaptor NEGATIVE GROUND ONLY supplied for the power source Controls 2906 QQ e DO O Q 2y ao a RON gt SPA AAA 345678 9101112 13 O HHONEPOEAVODADODEOD 000O6OTADARAGEEDIGDDD Power on off switch DC input jack LCD display Speaker Standby Power indicator Menu Channel Channel Auto OK Volume Volume Mode Remote control sensor RF in Video in jack Audio left in jack Audio right in jack Phones jack Self support Bracket Remote control operation MUTE A AN 1 KA MS T SLEEP 10 11 12 13 Note a Point the remote control unit from no more than about 3m from the remote control sensor and within about 60 of the front of the TV monitor i b Do not press the button too quick Press the button after the previous operation is completed 1 MUTE Used to toggle between norma
10. s properly selected External antenna is used for poor reception area No sound Check whether the volume is switch to low level or muted Headphone is inserted Picture is too dark Check the brightness and contrast settings Picture is unstable Adjust the direction length of the antenna Signal is too weak 1 Double image Antenna angle is not correct Signal rebound from adjacent building etc Snowy on the screen No colour Power interference Make sure the system setting are correct sit Warranty This Haier brand product when shipped in its original container will be free from defective workmanship and materials and agrees that it will at its option either repair the defect or replace the defective product with a new or re manufactured equivalent at no change to the purchaser for parts or labor for the periods set forth below This warranty does not apply to the appearance of the product or the exterior of the product which has been damaged or defaced altered or modified in design or construction lt does not apply to the additional excluded items set forth below The warranty commences on the date the item was purchased and the original purchase receipt must be presented to the authorized service center before warranty repairs are rendered The limited warranty described herein is in addition to whatever implied warranties may be granted to purchasers by law ALL
11. ternal movable antenna to RF in may also connect roof antenna directly For better reception Adjust the direction position of the antenna The signal strength depends on the area of reception If the signal is too weak poor or no reception is possible This is not a malfunction TV OPERATION GET STARTED e Besure the TV antenna is connected to the set properly e Plug the AC adaptor to the power source to power on the TV set e Slide power on off switch to on position e Press the TV AV button on the remote or MODE button on the main unit to select TV Mode e Press AUTO OK on the unit Then select YES 8 press AUTO button to program the channels onto the memory PROGRAMING BY REMOTE Press the MENU button on the remote and then select the satellite image by using the key Then press down arrow button yY to select antenna function Change to Air or Cable by using button depending upon the type of connection Then scroll to Auto Scan and press button twice TV will start auto programing function taking all the available cha mels into memory NOTE Auto Scan function has to be done for TV to capture channels initially SEARCH A PROGRAM e Press CH UP DOWN button once the channel number changes A desired channel can be reached using these two keys NUMERIC button on the remote can facilitate you to select a specific channel If the channel number exceeds 10 input first digital unit then another digital unit
12. ture mode itis used to select the desired picture mode Contrast itis used to adjust the contrast effect according to your own favorite Brightness itis used to adjust the brightness effect according to your own favorite Sharpness it is used to adjust the sharpness according to your own favorite Tint itis used to adjust the tint effect according to your own favorite Color it is used to adjust the color according to your own favorite Balance am 50 Audio Language 4 English gt av UP DOWN PbADJUST MENUEXIT Balance itis used to adjust the balance effect according to your own favorite Audio language itis used to select the desired audio output language OSD Duration 4 60 Sec Sleep Timer 4 off Time Zone 4 Central Daylight Saving Time 4 Off gt Clock enla nj av UP DOWN ADJUST MENU EXIT OSD Duration it is used to set the OSD display duration Sleep Timer it is used to set the sleep timer to auto power off the set Time Zone it is used to select time zone from different region Daylight Saving time it is used to advance one hour of the daylight time in summer in order to save the power Clock during DTV mode it is used to show code create date av UP DOWN ADJUST MENU EXIT Menu Language it is used to change menu language Color mode it is used to change the color mode of screen Zoom Mode it is used to select the display type Closed Caption it is used to s
13. y radio or TV interference caused by unauthorized modifications to this equipment Such modifications could void the user authority to operate the equipment This device complies with Part 15 of the FCC Rules Operation is subject to the condition that this device does not cause harmful interference WARNINGS e This TV monitor should be operated only at the adaptor supplied Do not try to repair the TV monitor yourself as it contains no user serviceable parts The TV monitor should only be repaired by a qualified technician e Stop using the TV monitor if the cabinet is damaged Have it checked by a service technician e Put your monitor only in a clean dry environment Unplug the monitor immediately if it gets wet and consult your service technician e Always unplug the monitor before cleaning it Clean the cabinet with a clean dry cloth Apply non ammonia based cleaner onto the cloth not directly onto the glass screen Keep the TV monitor away from magnetic objects motors TV sets and transformers Do not place heavy objects on the cable or power cord Care and Maintenance Avoid exposing your monitor directly to sunlight or other heat sources Place your TV monitor away from the sun to reduce glare e Put your TV monitor in a well ventilated area Do not place anything heavy on top of your monitor e Make certain that your TV monitor is installed in a clean and moisture free area Safety Tips e If smoke abno
Download Pdf Manuals
Related Search