Home

Optima IGS 320, Optima IGS 330 Conformance

1. ESTE INEEN mei EE EN E se gt Referenced SOP Class UID SOP Class UID gt Referenced SOP Class UID 0008 1150 1150 YesYes UID NOTE inthe Expected Return Key Type column indicates that this information is displayed on screen if available 3 3 Common Imaging Service Request Entity Modules Imaging Service Request Module 104 3 Worklist Query Module Definitions Optima IGS 320 Optima IGS 330 Conformance Statement of DICOM Direction 5537565 1 8EN Revision 1 Table 6 5 Imaging Service Request Module Attributes Attribute Name Tag Expected Expected Re Mapped into Matching Key turned Key the Image Type Type MPPS Accession Number 0008 0050 2 Yes Yes Single Value or Wild char matching is supported user entered value is sent Referring Physician s Name 0008 0090 2 Yes No Requested zero length The first person name component group is mapped in the image No truncation is performed Values may be truncated for display only NOTE inthe Expected Return Key Type column indicates that this information is displayed on screen if available 3 4 Common visit Entity Modules Visit Identification Table 6 6 Visit Identification Module Attribute Attribute Name Tag Expected Expected Re Mapped into Matching Key turned Key the Image Type Type MPPS Admission ID 0038 0010 o0 2 Ye Requested zero length 3 5 Common Patient Entity Modules 3 5 1 Patient Identification Tabl
2. Chapter 9 X ray Radiation Dose Structured Report Information Object Implementation Value Set Constraint Specifies the Dose Reduc tion Strategy that allows selecting between two strategies for reducing dose when lowering fluoro frame rates Specifies the autoexpo sure preference that al lows selecting between several strategies impact ing Dose and Image Qual ity Specifies the detail level which includes two set tings Low and Normal There is about 50 less Air Kerma rate in Low ver sus Normal except at max Fluoro dose limits Specifies the row dimen sion of the detector Field of View in mm Units EV mm UCUM mm Specifies the column di mension of the detector Field of View in mm Units EV mm UCUM mm Specifies the equivalent patient thickness in cm If it contains only one value it corresponds to the last pulse of the Irradiation Event If it contains more than one it shall contain as many values as pulses in the Irradiation Event Units EV cm UCUM cm Value Set Constraint Units EV Gy m UCUM Gy m Units EV Gy UCUM Gy Units EV Gy m UCUM Gy m 139 Optima IGS 320 Optima IGS 330 Conformance Statement of DICOM Direction 5537565 1 8EN Revision 1 NL Rel with Pa Concept Name Req Condition Value Set Constraint rent Type EV 113728 DCM Fluoro Used If Units EV Gy UCUM Dose RP Total Fluoro
3. The operator must select a destination in the User Interface and press the Verification button These operations will cause e the Optima DICOM Application Entity to initiate a DICOM association e the Optima DICOM Application Entity to emit a C ECHO command to check if the remote AE is available 3 3 2 2 Proposed Presentation Context Table Presentation Context Table Proposed Abstract Syntax Transfer Syntax ua Extended Negotiation Verification 1 2 840 10008 1 1 Implicit VR Little Endian 1 2 840 10008 1 2 SCU None SOP Specific DICOM Conformance Statement for Verification SOP Class The Optima DICOM AE provides standard conformance to the DICOM Verification SOP class NOTE The default timeout to receive the C ECHO response is 30 secs and is not configurable 3 3 3 Real World Activity Get Worklist 3 3 3 1 Associated Real World Activity The worklist transfer can be initiated either automatically when the DL application starts or manually by either clicking the Refresh button in the Patient Browser interface or the Refresh now button in the Define Worklist Settings screen These operation will cause e the Optima Application Entity to initiate a DICOM association e the Optima DL application to build the C FIND request e the Optima Application Entity to emit the C FIND request e the Optima Application Entity to receive the C FIND Reponse s Chapter 3 Network Conformance Statement 39 Optima IGS 320 Optim
4. study fluoro time 0015 xx83 IS 1 Total time of fluoroscopy during the study in seconds study record dap 0015 xx84 DS 1 Cumulative dose area product for the re cord acquisitions performed during the study in cGy cm2 study record time 0015 xx85 Total time of record acquisitions during the study in seconds study total fluoro dose study total fluoro dose fluoro dose 0015 XXEO 5 0015 XXE0 FL 1 Cumulated fluoro dose under a study study total record dose 0015 XXE1 Cumulated record dose under a study 5 5 Private Group GEMS QVA PHOTO 01 96 Private Group Private Group GEMS QVA PHOTO 01 modeled as part of the Image Information Entity Table 5 18 Private Group GEMS QVA PHOTO 01 Attribute Name Attribute Description and Use Dodge End Diastolic Volume ml 0009 xx60 Dodge s End Diastolic Volume ml Dodge End Systolic Volume ml 0009 xx61 EIE Dodge s End Systolic Volume mI Dodge Stroke Volume ml Stroke Volume ml 0009 xx62 x62 FR 1 Dodge s Stroke Volumeml s Stroke Volume ml E NNI Ejection Fraction 0009 xx63 ie ll ocn Dodge s Ejection Fraction in percent 0 100 Simpson s End Diastolic Volume ml S Simpson s End Diastolic Volume ml Diastolic Volume ml 0009 xx64 x64 R 1 Simpson s End Diastolic Volume ml S Simpson s End Diastolic Volume ml Diastolic Volume ml Simpson End Systolic Volume ml 0009 xx65 ie EA Simpson s End Systolic
5. 3Dcal calibration processing date 0021 xx06 Date of the processing of the calibration that has determined the projection matri 3Dcal calibration processing time 0021 xx07 TM Time of the processing of the calibration that has determined the projection matri 3Dcal L arm angle 0021 xx08 FL Mechanical angle of the L arm in de grees corresponding to the first image of the acquisition of the calibration phan 3Dcal C arm angle 0021 xx0A FL Mechanical angle of the C arm in de grees corresponding to the first image of the acquisition of the calibration phan 3Dcal matrix sequence 0021 xx0B SQ Sequence containing the elements of the calibration matrices The number of items Chapter 4 X Ray Angiography XA Information Object 71 Implementation 3Dcal Pivot angle vector 0021 xx09 FL Vector of the mechanical angles of the Pivot in degrees corresponding to all the images of the acquisition of the cali bration phantom The number of values of this attribute must be equal to the at tribute 0021 xx13 3Dcal number of im Optima IGS 320 Optima IGS 330 Conformance Statement of DICOM Direction 5537565 1 8EN Revision 1 Attribute Name BEEK SUME EE Attribute Description and Use gt 3Dcal matrix elements 0021 xx0C 1 N Elements of the projection matrices Each element is a real number represent ed by a maximum of 5 digits in its integer part then a comma then 15 digits in its fractional part 3Dcal algorithm versi
6. Simpson End Diastolic Volume ml m2 0009 xx80 Las A Ge Simspon s End Diastolic Volume ml m2 Simpson End Systolic Volume ml m2 0009 xx82 EN e Simspon s End Systolic Volume ml m2 Simpson s Stroke Volume ml m2 0009 xx84 MAA 4 Simspon s Stroke Volume ml m2 5 6 Private Group QCA_RESULTS Private Group Private Group QCA_RESULTS modeled as part of the Image Information Entity Table 5 19 Private Group QCA_RESULTS Attribute Name Tg VR w Attribute Description and Use CS 1 following values PRE POST and Analysis Views 0009 xx00 Enumerated type containing one of the PRE_POST Segment 0009 xx10 LO 1 ACC segment name Defined terms Proximal RCARCA OstiumMid RCADistal RCARight PDARight LV BRLMCALMCA OstiumProximal LADMid LAD Distal LAD1st Diagonal2nd Diagonal1st Septal Proximal CircumflexMid Circumflex1st Marginal2nd Marginal3rd Marginal Distal CircumflexL BEEN User description of pre procedure cathe ter Required if Analysis Type 0009 1100 is PRE or PRE POST Pre Catheter Name 0009 xx11 Pre Catheter Size 0009 xx12 Pre Reference Diameter 0009 xx13 Size of pre procedure catheter in millime ters Required if Analysis Type 0009 1100 is PRE or PRE POST Pre procedure Reference Diameter in millimeters Required if Analysis Type 0009 1100 is PRE or PRE POST Chapter 5 SC Information Object Implementation 97 Optima IGS 320 Optima IGS 330 Conformance Statement of DICOM Direction
7. 0018 1602 Internally generated by acquisition system i i 1C Shutter Right Vertical Edge 0018 1604 TEN Internally generated by acquisition system Shutter Upper Horizontal Edge 0018 1606 Internally generated by acquisition system Shutter Lower Horizontal Edge 0018 1608 Internally generated by acquisition system 4 5 9 X Ray Image Module Table 4 16 X Ray Image Module Attributes Image Type Values 1 2 3 have the following Enumerated Values Table 4 17 Image Type Enumerated Values Value 1 ORIGINAL identifies an Original Image or DERIVED identifies an image whose pixel value have been derived PRIMARY identifies a Primary Image 4 5 10 X Ray Acquisition Module 64 Table 4 18 X Ray Acquisition Module Attributes Tag Acquisition duration 0018 9073 The time in seconds needed for the com plete acquisition KVP 0018 0060 2 Peak kilo voltage output of the Xray gener ator used 4 Information Module Definitions Optima IGS 320 Optima IGS 330 Conformance Statement of DICOM Direction 5537565 1 8EN Revision 1 Attribute Name Tag Type Attribute Description Radiation Setting 0018 1155 Identify the general level of Xray dose ex posure Enumerated values are SC low dose fluoro GR high dose cine Xray tube current in mA Duration of Xray exposure in msec The product of exposure time and Xray tube current expressed in mAs Required if either Exposure Time 0018 1150 or Xray tube current 00
8. 0032 1064 3 A sequence that conveys the procedure Type of the requested Code Sequence procedure The Requested Procedure Code Sequence shall contain only a single item gt gt Code Value Value 0008 0100 Required if a sequence item is present ifa Required if a sequence item is present item is present ne schema a 0008 0102 Required if a sequence item is present gt gt Code meaning gt gt Code meaning 0008 0104 Required if a sequence item is present Required if a sequence item is present a sequence item is present gt Scheduled Procedure 0040 0009 1C Identifier that identifies the Scheduled Procedure step Step ID gt Scheduled Procedure 0040 0007 3 Institution generated description or classification of the Sched Step Description uled Procedure Step to be performed gt Scheduled Protocol Code 0040 0008 Sequence describing the Scheduled Protocol following a specif Sequence ic coding Scheme gt gt Code Value Value 0008 0100 Required if a sequence item is present Required if a sequence item is present a sequence item is present oe schema designa 0008 0102 Required if a sequence item is present Code meaning Code meaning 0008 90080104 1C Required if a sequence item is present ifa Required if a sequence item is present item is present Performed Procedure Step 0040 0253 Dem p Internally generated identifier ID Performed Procedure Step 0040 0244
9. 1701170 OR 160460 OR 1501150 OR 1471147 OR 121421 OR 1201120 Detector Type 0018 7004 SCINTILLATOR Positioner Primary Angle 0018 1510 Position of the Xray Image Intensifier about the patient from the RAO to LAO di rection where movement from RAO to ver tical is positive For multi frame images value of the first frame Note The values correspond to the mo tions in Pivot C L arm Rotation Tilt Pa tient Position 90 5 Standard Extended and Private Data Attributes Optima IGS 320 Optima IGS 330 Conformance Statement of DICOM Direction 5537565 1 8EN Revision 1 Image Pixel Spacing 0018 1164 Around 0 2 mm for FOV 120 mm to FOV 200 mm and around 0 4 mm for FOV 200 mm and above 5 2 Private Group DLX_SERIE_01 Private Group Private Group DLX_SERIE_01 is modeled as part of the Image Information Entity Table 5 15 Private Group DLX_SERIE_01 ose Attribute Description and Use Attribute Name Slope LV regression 0019 xx25 Intercept LV regression 0019 xx26 table vertical position 0019 xx21 table longitudinal position 0019 xx22 table lateral position 0019 xx23 angle value 1 0019 xx01 angle value 2 0019 xx02 angle value 3 0019 xx03 Chapter 5 SC Information Object Implementation 1 WW ME IM MB MES PTA Slope coefficient unit less of the linear regression correction of the Left Ventricu lar volume This linear regression cor rects the Left Ventricula
10. Ne posku ajte servisirati opreme Ce tega priro nika niste v celoti prebrali in razu meli e tega opozorila ne upo tevate se lahko zaradi elektri nega udara mehanskih ali drugih nevarnosti po koduje ponudnik storitev operater ali bolnik Bu servis k lavuzunun sadece ingilizcesi mevcuttur E er m teri teknisyeni bu k lavuzu ingilizce d nda bir ba ka lisandan talep ederse bunu terc me ettirmek m teriye d er Servis k lavuzunu okuyup anlamadan ekipmanlara m dahale etmeyiniz Bu uyar ya uyulmamas elektrik mekanik veya di er tehlikelerden dolay teknisyen operat r veya hastan n yaralanmas na yol a abilir 10 Optima IGS 320 Optima IGS 330 Conformance Statement of DICOM Direction 5537565 1 8EN Revision 1 This page left intentionally blank Important Information Optima IGS 320 Optima IGS 330 Conformance Statement of DICOM Direction 5537565 1 8EN Revision 1 Revision History Part Rev Reason for change Pages 5537565 1 8EN rev 1 April 2015 Initial release of 5537565 1 8EN Revision History 11 12 Optima IGS 320 Optima IGS 330 Conformance Statement of DICOM Direction 5537565 1 8EN Revision 1 This page left intentionally blank Revision History Optima IGS 320 Optima IGS 330 Conformance Statement of DICOM Direction 5537565 1 8EN Revision 1 Table of Contents Chapter 1 CONFORMANCE STATEMENT OVMERVIEWW ees ee ee see ee ese ee ee ee ee see ee ee ee ee ee ee ee eed ee ee ee e
11. Proce 1 M CEPT MOD dure reported ET See TID 1002 Observer Context Device Context 3 HAS CON CEPT MOD INCLUDE DTID 1002 Observer Context HAS OBS CONTEXT HAS PROP ERTIES CONTAINS CONTAINS CONTAINS EV G COE8 SRT Has Intent EV 113705 DCM Scope of Accumulation UIDREF 121126 DCM Performed Procedure Step SOP In stance UID INCLUDE DTID 10002 Accumulat ed X Ray Dose IFF Single Plane sys INCLUDE DTID 10002 Accumulat ed X Ray Dose IFF Biplane INCLUDE DTID 10002 Accumulat ed X Ray Dose 10 CONTAINS INCLUDE DTID 10003 Irradiation Event X Ray Data 11 CONTAINS TEXT EV 121106 DCM Com ment 12 gt CONTAINS IMAGE EV 121342 DCM Dose Image CONTAINS INCLUDE DTID 1020 Person Par eT Not Used ticipant Chapter 9 X ray Radiation Dose Structured Report Information Object Implementation DT 113704 DCM Pro jection X Ray Value R 002E9 SRT Combined Diagnostic and Therapeutic Procedure Value 113016 DCM ale Procedure Step System generated PPS In stance UID See TID 10002 Accumu lated X Ray Dose Where Plane EV 113622 DCM Single Plane Not Used See TID 10003 Irradiation Event X Ray Data System generated com ments using the PPS ID and Patient ID References to the dose map photo generated for that Performed Procedure Step 131 Optima IGS 320 Optima IGS 330 Conformance St
12. Required if a sequence item is present gt Referenced Study Sequence 0008 1110 gt gt Referenced SOP Class UID 0008 1150 gt gt Referenced SOP instance 0008 1155 UID gt Placer Order Number 0040 2016 From Worklist Required if a sequence item is present restricted to 64 characters From worklist From worklist Required if a sequence item is present gt Filler Order Number 0040 2017 gt Requested Procedure ID 0040 1001 gt Requested Procedure De 0032 1060 scription gt Requested Procedure Code 0032 1064 Sequence gt Code Value 0008 0100 gt Code scheme designator 0008 0102 Performed Procedure Code 0040 A372 Sequence gt Code Value 0008 0100 gt Code scheme designator 0008 0102 Current Requested Procedure 0040 A375 Evidence Sequence Required if a sequence item is present Required if a sequence item is present A sequence that conveys the type of procedure performed Required if a sequence item is present Required if a sequence item is present Required if a sequence item is present A sequence that provides refer ences to the list of all the ac quired and stored x ray images and DoseMap photos of the study O 4 Information Module Definitions Optima IGS 320 Optima IGS 330 Conformance Statement of DICOM Direction 5537565 1 8EN Revision 1 gt Study Instance UID 0020 000D 1 Required if a sequence item is present gt Referenced Series Sequence 0
13. Revision 1 Attribute Name Type for SCU N CREATE Acquisition without MWL En Acquisition with MWL Entry try gt Scheduled Procedure Step ID 0040 0009 2 Sent Empty 2 From Worklist gt Scheduled Procedure Step Description 0040 0007 2 Sent Empty 2 From Worklist gt Scheduled Protocol Code Sequence 0040 0008 2 Sent Empty 2 From Worklist gt gt Code Value 0008 0100 1 Not Sent 1 From Worklist Sent if the Sequence is not Empty 11 gt gt Coding Scheme Designator 0008 0102 1 Not Sent 1 From Worklist Sent if the Sequence is not Empty gt gt Code Meaning 0008 0104 3 Not Sent 3 From Worklist Sent if the Sequence is not Empty Patient s name 0010 0010 2 filled from User Interface 2 From Worklist or User In terface Patient ID 0010 0020 2 filled from User Interface 2 From Worklist or User In terface Patient s birth date 0010 0030 2 filled from User Interface 2 From Worklist or User In terface 0010 0040 2 filled from User Interface 2 From Worklist or User In terface 4 3 Performed Procedure Step Information Module Table 8 4 Performed Procedure Step Information Module Attributes Attribute Name Type for Type for SCU N SET Performed Procedure Step ID 0040 0253 1 Internally generated Unique within a pa tient Performed Station AE Title 0040 0241 1 TERRA AE Title configured in DL Performed Station Name 0040 0242 Same as AE Title TERRA Perf
14. ekladu do odpov daj c ho jazyka kolem z kazn ka e Nesna te se o dr bu tohoto za zen ani byste si p e etli tento provozn n vod a pochopili jeho obsah e V p pad nedodr ov n t to v strahy m e doj t k poran n pracovn ka prodejn ho servisu obslu n ho person lu nebo pacient vlivem elektrick ho proudu respektive vlivem mechanick ch i jin ch rizik Denne servicemanual findes kun p engelsk e Hvis en kundes tekniker har brug for et andet sprog end engelsk er det kundens ansvar at s rge for overs ttelse e Fors g ikke at servicere udstyret uden at l se og forst denne servicemanual e Manglende overholdelse af denne advarsel kan medf re skade p grund af elektrisk st d mekanisk eller anden fare for teknikeren operat ren eller patienten Deze onderhoudshandleiding is enkel in het Engels verkrijgbaar e Als het onderhoudspersoneel een andere taal vereist dan is de klant verantwoorde lijk voor de vertaling ervan e Probeer de apparatuur niet te onderhouden alvorens deze onderhoudshandleiding werd geraadpleegd en begrepen is e Indien deze waarschuwing niet wordt opgevolgd zou het onderhoudspersoneel de operator of een pati nt gewond kunnen raken als gevolg van een elektrische schok mechanische of andere gevaren This service manual is available in English only e If a customer s service provider requires a language other than English it is the cus tomer s responsibilit
15. millimeters Reguired if Analysis Type 0009 1100 is POST or PRE POST Post procedure Minimum Lumen Diame ter in millimeters Reguired if Analysis Type 0009 1100 is POST or PRE POST Post procedure Average Diameter in mil limeters Reguired if Analysis Type 0009 1100 is POST or PRE POST Post procedure Stenosis Length in milli meters Reguired if Analysis Type 0009 1100 is POST or PRE POST Post procedure Stenosis as a percent age Required if Analysis Type 0009 1100 is POST or PRE POST Post procedure Geometric Area Reduc tion as a percentage Reguired if Analy sis Type 0009 1100 is POST or PRE POST Private Group Private Group OUANTITATIVE RESULTS modeled as part of the Image Information Entity 5 Standard Extended and Private Data Attributes Optima IGS 320 Optima IGS 330 Conformance Statement of DICOM Direction 5537565 1 8EN Revision 1 Table 5 20 Private Group QUANTITATIVE_RESULTS Attribute Name Attribute Description and Use Calibration Frame 0009 xx40 IS 1 Frame in this image used for calibration no value if image was not calibrated or calibration was extended from another image End Diastolic Frame 0009 xx41 IS 1 Frame number of the end diastolic frame used in the analysis End Systolic Frame 0009 xx42 IS 1 Frame number of the end systolic frame used in the analysis End Diastolic Volume 0009 xx43 DS 1 End Diastolic Volume given in cubic cen timeter
16. ms UCUM 135 136 Optima IGS 320 Optima IGS 330 Conformance Statement of DICOM Direction 5537565 1 8EN Revision 7 NL Rel with Pa VT Concept Name VM Req Condition Value Set Constraint rent Type 36 CONTAINS NUM EV 113736 DCM Expo sure 37 CONTAINS NUM EV 113766 DCM Focal Spot Size 38 CONTAINS NUM EV 113742 DCM Irradi ation Duration 39 gt CONTAINS NUM EV 113767 DCM Aver age X Ray Tube Current 40 CONTAINS CODE EV 113745 DOM Pa tient Table Relationship CONTAINS CODE EV 113743 DOM Pa tient Orientation EV 113744 DOM Pa tient Orientation Modifier 42 gt gt HAS CON CEPT MOD 1 N U Contains only one item Units EV uA s UCUM Units EV mm UCUM mm mA If Patient Position HFS or HFP or HFDL or HFDR Value F 10470 SRT headfirst If Patient Position FFS or FFP or FFDR or FFDL Value F 10480 SRT feet first Value F 10450 SRT oi If Patient Position HFP or FFP value F 10310 SRT Prone If Patient Position HFS or FFS value F 10340 SRT Supine If Patient Position HFDR or FFDR value F 10317 SRT Right lat eral ducubitus If Patient Position HFDL or FFDL value F 10319 SRT left lateral 6 Standard Standard Extended and Private Templates Optima IGS 320 Optima IGS 330 Conformance Statement of DICOM Direction 5537565 1 8EN Revi
17. 0021 xx16 Generalized calibration 0021 xx20 Type of algorithm that centers the projec tion matrices defined values are ISO CENTER HELIX RECTIFIED OTHER Augmented calibration string containing the concatenated content of the general ized calibration data DA 3Dcal Instance UID 0021 xx14 UI SOP Instance UID of the DICOM image corresponding to the acquisition of the calibration phantom 5 4 Private Group GEMS_DL_IMG_01 Private Group GEMS_DL_IMG_01 is modeled as part of the Image Information Entity Table 4 28 Private Group GEMS_DL_IMG_01 Attribute Name Tag Attribute Description and Use 5 Standard Extended and Private Data Attributes Optima IGS 320 Optima IGS 330 Conformance Statement of DICOM Direction 5537565 1 8EN Revision 1 Patient position per image 0019 xxC7 CS 1 Patient position descriptor relative to the equipment The defined terms are head first HFP head first supine HFS head first decubitus right HFDR head first decubitus left HFDL feet first decubitus right FFDR feet first decubitus left FFDL feet first prone FFP feet first supine FFS Patient orientation vector 0019 xxBF 2 2N A vector on as many elements as 2 times the number of frames Each couple of el ements contains the Patient Orientation of the frame Patient Orientation as de fined in 0020 0020 Body Part Examined of current Image 0019 xx70 Text description of the part of the body examine
18. 5 SC Information Object Implementation and see Chapter 9 X Ray Radiation Dose Structured Report Information Object The Storage Commitment will be requested for all SOP Instances for which the image transfer and or Dose SR was successful Chapter 3 Network Conformance Statement 41 42 Optima IGS 320 Optima IGS 330 Conformance Statement of DICOM Direction 5537565 1 8EN Revision 1 The time interval to attempt the Storage Commitment requests after the successful image transfer and or Dose SR is configurable The default value is 0 seconds i e immediately after the image Dose SR transfer Each Storage Commitment request N ACTION may include one or more SOP Instances depending on the numberof images that were transferred For Dose SR s each request includes only one SOP Instance AE do not support the optional Storage Media File Set ID and UID Attributes in the Storage Commitment N ACTION for transfer of SOP Instances by media for Storage Commitment The Storage Commitment Information Object is described in Storage commitment push model information object definition seeChapter 7 Storage commitment push model information object definition The AE will generate a new transaction UID at each new Storage commitment request N ACTION After sending the N ACTION request to the storage commitment provider s and if the storage commitment provider s sends a busy signal resource limitation as a N ACTION response O
19. 5 2 Image Pixel Module EE N EE KERE eae apa 88 4 5 3 SC Image ee EI 89 45A VOLUT module cic ct SG EE bu b o de Ber M ei Ge iic adeat eiae tie 89 45 5 SOP Common Module ssi iato pee tret ettet er ote m Mo ast cu p ele tu etd 89 16 Table of Contents Optima IGS 320 Optima IGS 330 Conformance Statement of DICOM Direction 5537565 1 8EN Revision 1 5 Standard Extended and Private Data Attrbutes A 90 9 1 standard AUMOULSS EE EE AG ithe Gal aaah alah wien werd te Late dt ua 90 5 2 Private Group DEX SERIE Dic lene SR EER EE es ER sh Doe Ht cd 91 5 3 Private Group GEMS DL IMG OD 92 5 4 Private Group GEMS DL STUDY Oil 95 5 5 Private Group GEMS QVA PHOTO Oil 96 9 6 Private Group OACA RESULTS SEEK Geese o itc pe Ee EG ang e pd gus 97 5 7 Private Group QUANTITATIVE RESULTS ees ee ESE rice rio uota se ee tends 98 5 8 Private Group GEMS DL SERIES OI 99 Chapter 6 MODALITY WORKLIST INFORMATION MODEL DEFINITION useeeees 101 joies Moo 101 2 Worklist Query Module Table is tir Petersen te tud ptt up bee RE He re Ge eg 102 3 Worklist Query Module Definitioris cuenten rne nennt tnnt kenn anden 103 3 1 Common Scheduled Procedure Step Entity Modules ese ee ee ee Ee ee ee ee ee 103 3 1 1 SOP Common Be lt EE 103 3 1 2 Scheduled Procedure Step Module 103 3 2 Common Requested Procedure Entity Module 104 3 3 Common Imaging Se
20. 8 Modality Performed Procedure Step 119 Implementation Optima IGS 320 Optima IGS 330 Conformance Statement of DICOM Direction 5537565 1 8EN Revision 1 This page left intentionally blank 120 6 Standard Extended and Private Data Attributes Optima IGS 320 Optima IGS 330 Conformance Statement of DICOM Direction 5537565 1 8EN Revision 1 Chapter 9 X ray Radiation Dose Structured Report Information Object Implementation 1 Introduction This section specifies the use of the DICOM X Ray Radiation Dose SR IOD to represent results produced by this implementation Corresponding attributes are conveyed using the module construct Chapter 9 X ray Radiation Dose Structured Report 121 Information Object Implementation Optima IGS 320 Optima IGS 330 Conformance Statement of DICOM Direction 5537565 1 8EN Revision 1 2 Optima Mapping of DICOM Entities The Optima system maps DICOM Information Entities to local Information Entities in the product s database and user interface Table 9 1 Mapping OF DICOM Entities to Optima Entities DICOM IE Optima Entity 122 2 Optima Mapping of DICOM Entities Optima IGS 320 Optima IGS 330 Conformance Statement of DICOM Direction 5537565 1 8EN Revision 1 3 IOD Module Table The X Ray Radiation Dose Structured Report Information Object Definitions comprise the modules of the following tables The contents of the SR Document Content are constrained by the supported template as identified in
21. Browser operation and transfer the selected Dose SR s 3 3 1 2 Proposed Presentation Context Table Presentation Context Table Proposed Abstract Syntax Transfer Syntax Extended Negotia tion Secondary Capture 1 2 840 10008 5 1 4 1 1 7 Implicit VR Little 1 2 840 10008 1 2 None Image Storage Endian Secondary Capture 1 2 840 10008 5 1 4 1 1 7 Explicit VR Little 1 2 840 10008 1 2 1 None Image Storage Endian X Ray Angiographic i 2 840 10008 5 1 4 1 1 12 Implicit VR Little 1 2 840 10008 1 2 None Image Storage Endian X Ray Angiographic TERR 4 1 1 12 Explicit VR Little 1 2 840 10008 1 2 1 None Image Storage Endian X Ray Radiation Dose 1 2 840 10008 5 1 4 1 1 88 Implicit VR Little 1 2 840 10008 1 2 None SR Image Storage 67 Endian Chapter 3 Network Conformance Statement 37 38 Optima IGS 320 Optima IGS 330 Conformance Statement of DICOM Direction 5537565 1 8EN Revision 1 Presentation Context Table Proposed Abstract Syntax Transfer Syntax peg Extended Negotia tion X Ray Radiation Dose 1 2 840 10008 5 1 4 1 1 88 Explicit VR Little 1 2 840 10008 1 2 1 SCU None SR Image Storage 67 Endian SOP Specific DICOM Conformance Statement for all Storage SOP Classes This implementation can perform multiple C STORE operation over a single association Multiple C STORE operation is used only to send images Upon receiving a C STORE confirmation containing a Successful status this implementation will perform t
22. Configurable Context El le EE 130 Table of Contents Optima IGS 320 Optima IGS 330 Conformance Statement of DICOM Direction 5537565 1 8EN Revision 1 6 Standard Standard Extended and Private Templates ss ss esse ee ee ee ee ee ee ee ee ee ee ee Ee 131 6 1 Standard Templates ee ee ee ee 131 6 1 1 Template ID 10001 X Ray Radiation Dose 131 6 1 2 TID 10002 Accumulated X Ray Dose Type Extensible iese se esse ee ee ee ee 132 6 1 3 TID 10003 Irradiation Event X Ray Data Type Extensible 133 6 1 4 TID 10004 Accumulated Projection X Ray Dose Type Extensible 139 6 1 5 110 1002 Observer Condition oet rn aati ek PRI UNS 140 6 1 6 TID 1003 Person Observer Identifying Aitrbutes ee Re Re ee ee 141 6 1 7 TID 1004 Device Observer Identifying Attributes ee ee RR ee ee 141 6 1 8 TID 1020 Person Participant 141 6 1 9 TID 1021 Device Participant 142 6 2 Private Temiplates sye EERS A det ov re de Ges ee Ge to De veg ie du 142 Table of Contents 19 20 Optima IGS 320 Optima IGS 330 Conformance Statement of DICOM Direction 5537565 1 8EN Revision 1 This page left intentionally blank Table of Contents Optima IGS 320 Optima IGS 330 Conformance Statement of DICOM Direction 5537565 1 8EN Revision 1 Chapter 1 Conformance Statement Overview 1 Conformance Statement Overview The Optima system provides sophisticated image processing and storage functions Optima s
23. Conformance Statements http www ge com DICOM APPLICATION ENTITY SPECIFICATION SERVICE CLASSES INFORMATION OBJECTS MESSAGE EXCHANGES ETC Optima IGS System Conformance Prod uct Conformance Statement Im plementation Statement Direction Direction 5537565 1 8EN DICOM STANDARD DICOM Part 1 Standard mem Specification Part 16 o e This document specifies the DICOM implementation It is entitled Optima IGS 320 Optima IGS 330 Cardiovascular Imaging System Conformance Statement for DICOM Direction 5537565 1 8EN This DICOM Conformance Statement documents the DICOM Conformance Statement and Technical Specification required to interoperate with the GEMS network interface The GEMS Conformance Statement contained in this document also specifies the Lower Layer communications which it supports e g TCP IP However the Technical Specifications are defined in the DICOM Part 8 standard For more information regarding DICOM copies of the Standard may be obtained on the Internet at http medical nema org Comments on the Standard may be addressed to 24 1 Introduction Optima IGS 320 Optima IGS 330 Conformance Statement of DICOM Direction 5537565 1 8EN Revision 1 DICOM Secretariat NEMA 1300 N 17 Street Suite 1847 Rosslyn VA 22209 USA Phone 1 703 841 3200 1 4 Intended Audience The reader of this document is concerned with software design and or system integration issues
24. Date on which the Performed Procedure step started Same as Start Date Study Date Performed Procedure Step 0040 0245 3 Time on which the Performed Procedure Step started Same as Start Time Study Time Performed Procedure Step 0040 0254 3 description of the Procedure Step that was performed Description 4 Information Module Definitions Optima IGS 320 Optima IGS 330 Conformance Statement of DICOM 4 4 Equipment Entity Modules General Equipment Module Table 4 7 General Equipment Module Attributes Attribute Name Tag Manufacturer Institution Name Institution Address Station name Manufacturer s Model Name Device Serial Number Software Versions Gantry ID 4 5 Image Entity Modules 4 5 1 General Image Module Table 4 8 General Image Module Attributes Attribute Description Attribute Name Tag Instance Number 0020 0013 0020 0020 0008 0023 0008 0033 0008 0008 0008 0022 0008 0032 Patient Orientation Content Date Content Time Image Type Acquisition Date Acquisition Time Image Comments 0020 4000 0008 3010 0008 2112 Irradiation Event UID Source Image Sequence gt Referenced SOP Class UID 0008 1150 gt Referenced SOP Instance 0008 1155 UID gt Purpose of Reference Code 0040 A170 Sequence Chapter 4 X Ray Angiography XA Information Object Implementation 2 1C 1C Direction 5537565 1 8EN Revision 1 Attribute Description 000
25. Digital Imaging and Communications in Medicine DPPS Data Points Per Second 7 Introduction Optima IGS 320 Optima IGS 330 Conformance Statement of DICOM IOD Information Object Definition MWL Modality Worklist MPPS Modality Performed Procedure Step PACS Picture Archiving and Communication System SC Secondary Capture SCP Service Class Provider SCU Service Class User SOP Service Object Pair SPS Scheduled Procedure Step SR Structured Report VR Value Representation VM Value Multiplicity XA X ray Angiography Chapter 2 Introduction Direction 5537565 1 8EN Revision 1 29 30 Optima IGS 320 Optima IGS 330 Conformance Statement of DICOM Direction 5537565 1 8EN Revision 1 This page left intentionally blank 1 Introduction Optima IGS 320 Optima IGS 330 Conformance Statement of DICOM Direction 5537565 1 8EN Revision 1 Chapter 3 Network Conformance Statement 1 Introduction This section of the DICOM Conformance Statement specifies the Optima product compliance to DICOM requirements for Networking features This section details the roles and the DICOM Service Classes the System supports The Optima System DICOM implementation allows The user to copy Optima images and or Radiation Structured Dose Reports acquired through the system to a remote DICOM Application Entity using the Standard Storage DICOM Service as a Service Class User The user to request storage commitment for Optima i
26. From User Interface user defined description of the acquisition protocol Series Description 0008 103E Internally generated Series Description using Study RP SPS information Operator s Name 0008 1070 From User Interface restricted to 64 charac ters Body Part Examined 0018 0015 Text description of the part of the body exam ined Patient Position 0018 5100 Patient position descriptor relative to the equipment Defined terms are HFP Head First Prone HFS Head First Supine HFDR Head First Decubitus Right HFDL Head First Decubitus Left FFDR Feet First Decubitus Right FFDL Feet First Decubitus Left FFP Feet First Prone FFS Feet First Supine Request Attributes Sequence 0040 0275 Sequence that contains attributes from the Imaging Service Request The sequence may have only one item 86 4 Information Module Definitions Optima IGS 320 Optima IGS 330 Conformance Statement of DICOM Direction 5537565 1 8EN Revision 1 Attribute Name Attribute Description gt Requested Procedure ID 0040 1001 1C Identifier that identifies the Requested Proce dure in the Imaging Service Request Re quired if Sequence Item is present gt Requested Procedure Description 0032 1060 3 Institution generated administrative descrip tion or classification of Requested Procedure May not be sent gt Requested Procedure Code Sequence 0032 1064 3 A sequence that conveys the Procedure Type of the requested procedure The
27. In case of the timeout AE can receive N EVENT REPORT on the Association initiated by the Storage Commitment SCP Application Entity Referenced SOP Class not supported Display error in network queue It will be processed as described for Association initiated by the Storage Commitment SCP see Section 3 4 3 The AE will return the standard status codes in NCEVENT REPORT RSP message as specified below Service Status Status Codes Further Meaning Further Meaning Failure 0119 Class instance conflict The specified SOP Instance is not a member of the specified SOP class 0112 No such SOP Instance The SOP Instance UID specified implied a viola tion of the UID construction rules 0110 Processing failure A general failure in processing the operation was encountered 3 3 5 Real world Activity Send MPPS 3 3 5 1 Associated Real world Activity This implementation provides for simple transfer of procedure and image information using the DICOM Modality Performed Procedure Step SOP Class as a Service Class User SCU The Performed Procedure Step N CREATE message is sent automatically when the user starts the exam and after a worklist entry has been selected or patient data have been entered on the patient data entry screen There is no operator intervention required The Performed Procedure Step N SET message is sent automatically after the exam has been ended There is no operator intervention required If the operator successfully ended t
28. It is assumed that the reader of this document is familiar with the DICOM Standard and with the terminology and concepts which are used in that Standard 1 5 Scope and Field Application It is the intent of this document to provide an unambiguous specification for GEMS implementations This specification called a Conformance Statement includes a DICOM Conformance Statement and is necessary to ensure proper processing and interpretation of GEMS medical data exchanged using DICOM The GEMS Conformance Statements are available to the public The reader of this DICOM Conformance Statement should be aware that different GEMS devices are capable of using different Information Object Definitions For example a GEMS CT Scanner may send images using the CT Information Object MR Information Object Secondary Capture Object etc Included in this DICOM Conformance Statement are the Module Definitions which define all data elements used by this GEMS implementation If the user encounters unspecified private data elements while parsing a GEMS Data Set the user is well advised to ignore those data elements per the DICOM standard Unspecified private data element information is subject to change without notice If however the device is acting as a full fidelity storage device it should retain and re transmit all of the private data elements which are sent by GEMS devices 1 6 Important Remarks The use of these DICOM Conformance Statements in conju
29. Object 79 Implementation Optima IGS 320 Optima IGS 330 Conformance Statement of DICOM Direction 5537565 1 8EN Revision 1 AttributeName Name Attribute Description and Use ee record time mm JE d X time of record acquisitions during the study in seconds study total fluoro dose study total fluoro dose fluoro dose 0015 XXEO 5 0015 XXE0 FL 1 Cumulated fluoro dose under a study study total record dose 0015 XXE1 Cumulated record dose under a study 5 6 Private Group GEMS_DL_SERIES_01 Private Group GEMS DL SERIES 01 is modeled as part of the Image Information Entity Table 4 30 Private Group GEMS DL SERIES 01 AWibweName Name Attribute Attribute Description and Use and Use EE waa ID CN xx56 EUIS of the Table Value OMEGA ELEGANCE 5 7 Private Group GEMS DL IMG 02 Private Group GEMS DL IMG 02 is modeled as part of the Image Information Entity Table 4 31 Private Group GEMS DL IMG 02 Attribute Name Attribute Description and Use Spatial denoising sensivity 0027 xx10 SS 1 Define the parameters for spatial denois ing SPNR Algorithm Values 2 1 0 1 or 2 2 is the weakest 2 is the strongest denoising setting SPNR Noise 0027 xx13 FL 1 Range of noise for SPNR typical values between 0 and 100 SPNR Threshold 0027 xx14 FL 1 Threshold for the SPNR Algorithm The higher the value the stronger the denois ing Temporal denoising sensitivity 0027 xx15 SS
30. Plane Image acquisition date and time concatenation of Protocol name and Acquisition mode Not Used If anatomy Not Used is bi lateral IF Row 13 Not Used or Row 14 is present and Row 9 is not present If FLUORO Then Value P5 06000 SRT fluoro scopy If Positioner Mo tion Table Motion STAT IC Then Value 113611 DCM Stationary Acquisi tion If Positioner Mo tion DYNAMIC and Table Motion STATIC Then Val ue 113613 DCM Ro tational Acquisition If Ta ble Motion DYNAMIC Then Value 113612 DCM Stepping Acquisi tion 113860 DCM 15cm from Isocenter toward Unique for every irradia tion Restricted to 64 char 113609 DCM Instance Number 133 134 Optima IGS 320 Optima IGS 330 Conformance Statement of DICOM Direction 5537565 1 8EN Revision 1 Rel with Pa Concept Name VM Req Condition Value Set Constraint rent Type CONTAINS NUM EV 122130 DCM Dose IFF TID Units EV Gy m Area Product 10001 UCUM Gy m2 Row 2 113704 DCM Pro jection X Ray CONTAINS NUM EV 111631 DCM Aver IFF TID Not Used age Glandular Dose 10001 Row 2 P5 40010 SRT Mammog raphy CONTAINS NUM EV 113738 DCM Dose IFF TID Units EV Gy UCUM RP 10001 Gy Row 2 113704 DCM Pro jection X Ray AND any of the values of TID 10001 Row 14 are not 113858 DCM MPPS Content CONTAINS
31. Ray Table Module Attributes Attribute Name Table Motion BEE 1134 2 0018 1135 0018 1137 Table Vertical Increment Table Longitudinal Increment Table Lateral Increment Table Angle 4 5 13 XA Positioner Module 0018 1136 0018 1138 Table 4 21 XA Positioner Module Attributes Distance Source to Patient 0018 1111 Optima IGS 320 Optima IGS 330 Conformance Statement of DICOM Direction 5537565 1 8EN Revision 1 Defined terms STATIC DYNAMIC DYNAM IC if there is any movement in table or rela tive motion of table with respect to isocenter NOTE Table Motion may also be set to DY NAMIC when there is only a tilt table motion In that specific case Table Increments will be Incremental change in Vertical position of the table plane relative to first frame of Multiframe image given in mm Table motion down is positive Required if Table Motion is DYNAM IC NOTE if the table is tilted this attribute determines a change of the tilted plane in the vertical direction Incremental change in Longitudinal position of the table in the table plane even if the ta ble is tilted relative to first frame of Multi frame image given in mm Table motion to wards CRA is positive Required if Table Mo tion is DYNAMIC NOTE if the table is tilted and rotated this attribute determines a change of the table in the tilted plane not in the horizontal plane and in the CRA CAU di rection of the isocenter system wh
32. Return Key Type column indicates that this information is displayed on screen if available 3 5 2 Patient Demographic 106 Table 6 8 Patient Demographic Module Attributes Attribute Name Tag Expected Expected Re Mapped into Matching Key turned Key the Image Type Type MPPS Patients Birth Date 0010 0030 Requested zero length Patient s Weight 0010 1030 Patient s Size 0010 1020 Patients Sex 0010 0040 o 2 veses Requested zero length NOTE in the Expected Return Key Type column indicates that this information is displayed on screen if available 3 Worklist Query Module Definitions Optima IGS 320 Optima IGS 330 Conformance Statement of DICOM Direction 5537565 1 8EN Revision 1 Chapter 7 Storage Commitment Push Model Implementation 1 Storage Commitment Push Model Implementation 1 1 Storage commitment push model implementation Please refer to DICOM Part 3 Information Object Definitions for a description of each of the attributes contained within the Storage Commitment Information Object The Storage Commitment Information Object is used both for N ACTION Storage Commitment Requests by the SCU and N EVENT REPORT Storage Commitment Notifications by the SCP 1 2 Storage Commitment Module for N Action Table 7 1 Storage Commitment Module for N Action RQ CEC EEN ENE HE EEE IC WENE ECT CI WENE ET CI 1 3 Storage Commitment Module for N Event Report Table 7 2 Storage Commitm
33. The Code Meaning 0008 0104 is text which has meaning to a human and which conveys the meaning of the term defined by the combination of Code Value and Coding Scheme Designator Performed Procedure Step End Date 0040 0250 2 3 Date on which the Performed Procedure Step ended Performed Procedure Step End Time 0040 0251 2 3 Time at which the Performed Procedure Step ended Performed Procedure Step Discontinuation 0040 0281 3 3 The reason the Performed Procedure Step Reason Code Sequence Status 0040 0252 was set to DISCONTIN UED gt Code Value 0008 0100 1 1C The Code Value 0008 0100 is an identifier that is unambiguous within the Coding Scheme denoted by Coding Scheme Desig nator 0008 0102 and Coding Scheme Ver sion 0008 0103 gt Coding Scheme Designator 0008 0102 1 1C The attribute Coding Scheme Designator 0008 0102 identifies the coding scheme in which the code for a term is defined gt Code Meaning 0008 0104 3 3 The Code Meaning 0008 0104 is text which has meaning to a human and which conveys the meaning of the term defined by the combination of Code Value and Coding Scheme Designator 4 Modality Performed Procedure Step Module Definitions Optima IGS 320 Optima IGS 330 Conformance Statement of DICOM Direction 5537565 1 8EN Revision 1 4 4 Image Acquisition Result Module Table 8 5 Image Acquisition Result Module Attributes Attribute Name Tag Type for Type for Use SCU N SCU N SET CREATE
34. UID 0020 000E gt Series Description 0008 103E gt Retrieve AE Title 0008 0054 gt Referenced Image Sequence 0008 1140 gt gt Referenced SOP Class UID 0008 1150 Uniquely identifies the referenced SOP Class gt gt Referenced SOP Instance UID 0008 1155 Uniquely identifies the referenced SOP In stance Chapter 8 Modality Performed Procedure Step 115 Implementation User defined description of the conditions under which the Series was performed Name s of the operator s who supporting this Series Unique Identifier of the Series User provided description of the Series AE Title A Sequence that provides reference to XA Image SOP Instances created during the acquisition of the procedure step This does not include reference of the Secondary Capture Image SOP Instances The se quence may have zero or more Items Optima IGS 320 Optima IGS 330 Conformance Statement of DICOM Attribute Name Type for SCU N CREATE gt Referenced Non Image Composite SOP Instance Sequence gt gt Referenced SOP Class UID 0008 1150 gt gt Referenced SOP Instance UID 0008 1155 4 5 Radiation Dose Module Table 8 6 Radiation Dose Module Attributes Attribute Name Type for SCU N CREATE Total Time of Fluoroscopy 0302 8302 Ta Total Number of Exposures Entrance Dose 0040 0302 0040 8302 0018 115E Entrance Dose in mGy Image Area Dose Product o Direction 5537565 1 8EN Rev
35. Universal Entity ID 0040 0032 From Worklist Universal or unique identifier for the Patient ID Assigning Authority The authority identified by this attribute shall be the same as that of Issuer of Patient ID 0010 0021 if present gt Universal Entity ID Type 0040 0033 From Worklist Standard defining the format of the Universal Entity ID 0040 0032 Re quired if Universal Entity ID 0040 0032 is present From Worklist Type of Patient ID From Worklist A sequence of identification numbers or codes used to identify the patient If present shall contain one or more items gt Patient ID 0010 0020 From Worklist An identification number or code used to identify the patient 4 Information Module Definitions gt Identifier Type Code 0040 0035 Other Patient IDs Sequence 0010 1002 Optima IGS 320 Optima IGS 330 Conformance Statement of DICOM Direction 5537565 1 8EN Revision 1 Attribute Name Attribute Description gt Issuer of Patient ID 0010 0021 1 From Worklist Identifier of the Assigning Au thority system organization agency or de partment that issued the Patient ID gt Type of Patient ID 0010 0022 1 From Worklist The type of identifier in this item Defined Terms TEXT RFID BARCODE 4 2 Study Entity Modules 4 2 1 General Study Module Table 5 4 General Study Module Attributes Attribute Name Attribute Description Study Instance UID 0020 000D 1 From Worklist Otherwise inte
36. X ray Radiation Dose Structured Report 127 Information Object Implementation Optima IGS 320 Optima IGS 330 Conformance Statement of DICOM Direction 5537565 1 8EN Revision 1 SR Document Content Descriptions The product supports the following root Templates for SR SOP Instances created by the product Table 9 8 SR Root Templates SOP Class Template ID Template Name Use X Ray Radiation Dose SR 10001 X Ray Radiation Dose Refer to section Standard Standard Extended and Private Templates for a detailed description of the supported templates 4 4 3 SOP Common Module Table 9 9 SOP Common Module Attributes SOP Class UID 0008 0016 1 2 840 10008 5 1 4 1 1 88 67 SOP Instance UID 0008 0018 Restricted to 64 characters in ternally generated 0005 1 1 Specific Character Set 0008 0005 ISO_IR 100 Latin Alphabet No 1 128 4 Information Module Definitions Optima IGS 320 Optima IGS 330 Conformance Statement of DICOM Direction 5537565 1 8EN Revision 1 5 Standard Extended and Private Context Groups 5 1 Standard Extended and Private Context Groups The Product supports coded terminology using Standard Extended Private and Configurable Context Groups defined in the following sections 5 2 Standard Extended Context Groups The Product supports the following extensions to standard Context Groups for SR SOP Instances created by this product Extensions are indicated by bold text Table 9 10 Context ID 4
37. and or function 1 7 References NEMA PS3 Digital Imaging and Communications in Medicine DICOM Standard available free at http medical nema org 1 8 Definitions 26 Informal definitions are provided for the following terms used in this Conformance Statement The DICOM Standard is the authoritative source for formal definitons of these terms Abstract Syntax The information agreed to be exchanged between applications generally equivalent to a Service Object Pair SOP Class Examples Verification SOP Class Modality Worklist Information Model Find SOP Class Computed Radiography Image Storage SOP Class Application Entity AE An end point of a DICOM information exchange including the DICOM network or media interface software i e the software that sends or receives DICOM information objects or messages A single device may have multiple Application Entities Application Entity Title The externally known name of an Application Entity used to identify a DICOM application to other DICOM applications on the network Application Context The specification of the type of communication used between Application Entities Example DICOM network protocol 1 Introduction Optima IGS 320 Optima IGS 330 Conformance Statement of DICOM Direction 5537565 1 8EN Revision 1 Association A network communication channel set up between Application Entities Attribute A unit of information in an object definition a data
38. angly kalba e Jei kliento paslaug tiek jas reikalauja vadovo kita kalba ne angl suteikti vertimo paslaugas privalo klientas e Nem ginkite atlikti rangos technin s prie i ros jei neperskait te ar nesupratote io eksploatavimo vadovo e Jei nepaisysite io sp jimo galimi paslaug tiek jo operatoriaus ar paciento su a lojimai d l elektros oko mechanini ar kit pavoj Denne serviceh ndboken finnes bare p engelsk e Hvis kundens serviceleverand r har bruk for et annet spr k er det kundens ansvar s rge for oversettelse e Ikke fors k reparere utstyret uten at denne servicehandboken er lest og forst tt e Manglende hensyn til denne advarselen kan f re til at serviceleverand ren oper at ren eller pasienten skades p grunn av elektrisk st t mekaniske eller andre farer Niniejszy podr cznik serwisowy dost pny jest jedynie w j zyku angielskim e Je li serwisant klienta wymaga j zyka innego ni angielski zapewnienie us ugi t u maczenia jest obowi zkiem klienta e Nie pr bowa serwisowa urz dzenia bez zapoznania si z niniejszym podreczni kiem serwisowym i zrozumienia go e Niezastosowanie sie do tego ostrze enia mo e doprowadzi do obra e serwisan ta operatora lub pacjenta w wyniku pora enia pr dem elektrycznym zagro enia mechanicznego b d innego Este manual de assist ncia t cnica encontra se dispon vel unicamente em ingl s e Se outro servi o de a
39. ation Administering See TID 1020 9 CONTAINS NUM EV 111633 DCM Com pression Thickness CONTAINS INCLUDE DTID 4007 Mammogra phy CAD Breast Composi tion 55 i INCLUDE DTID 1020 Person Par ticipant 56 CONTAINS INCLUDE DTID 1021 Device Partic ipant 57 CONTAINS IMAGE EV 113795 DCM Ac quired Image DeviceProcedureRole EV 113859 DCM Irradi ating Device See TID 1021 References to Image SOP Class SOP Instance pairs 6 Standard Standard Extended and Private Templates Optima IGS 320 Optima IGS 330 Conformance Statement of DICOM Direction 5537565 1 8EN Revision 1 Rel with Pa rent IN d 1 6 1 4 TID 10004 Accumulated Projection X Ray Dose Type Extensible Table 9 16 VM Req NL VT Concept Name Condition Type IFF Row 4 value P5 06000 SRT fluo roscopy EV INNOVA 101 99GEMS Dose Reduction Strat egy EV INNOVA 102 U 99GEMS Auto Exposure Preference EV INNOVA 103 99GEMS Detail Level EV INNOVA 104 99GEMS Field Of View Row Dimension EV INNOVA 105 99GEMS Field Of View Column Dimension EV INNOVA 106 99GEMS Patient Equiva lent Thickness Req NL Rel with Pa VT Concept Name VM rent Type 1 NUM EV 113722 DCM Dose 1 M Area Product Total i ie EV 113725 DCM Dose RP Total GEN N ai B EV 113726 DCM Fluoro Dose Area Product Total Fluoro is acquired
40. element identified by a tag The information may be a complex data structure Sequence itself composed of lower level data elements Examples Patient ID 0010 0020 Accession Number 0008 0050 Photometric Interpretation 0028 0004 Procedure Code Sequence 0008 1032 Information Object Definition IOD The specified set of Attributes that comprise a type of data object does not represent a specific instance of the data object but rather a class of similar data objects that have the same properties The Attributes may be specified as Mandatory Type 1 Required but possibly unknown Type 2 or Optional Type 3 and there may be conditions associated with the use of an Attribute Types 1C and 2C Examples MR Image IOD CT Image IOD Print Job IOD Joint Photographic Experts Group JPEG A set of standardized image compression techniques available for use by DICOM applications Media Application Profile The specification of DICOM information objects and encoding exchanged on removable media e g CDs Module A set of Attributes within an nformation Object Definition that are logically related to each other Example Patient Module includes Patient Name Patient ID Patient Birth Date and Patient Sex Negotiation First phase of Association establishment that allows Application Entities to agree on the types of data to be exchanged and how that data will be encoded Presentation Context The set of DICOM network servi
41. first frame Precision of the Table Tilt angle ex pressed as standard deviation in de grees Contains values equal or higher than zero Angle of the left right axis of the table in degrees relative to the horizontal plane Zero is when the left right axis is in the horiwontal plane Positive values are when the left of the table is upwards the horizontal plane The valid range is from 45 to 45 Contains the value of the first frame Distance in mm from source to detector center for each frame of the multi frame image Distance in mm from source to the sys tem isocenter This is a multi valued at tribute that contains the SOD for each frame Diastolic contour image coordinates Three or more pairs of values with the coordinates of the contour points row and column starting at 1 1 with respect to the origin upper left corner of the pix el data Systolic contour image coordinates Three or more pairs of values with the coordinates of the contour points row and column starting at 1 1 with respect to the origin upper left corner of the pix el data The brightness contrast applied during the image acquisition Brightness from 0 0 to 100 0 Contrast from 100 0 to 100 0 The brightness contrast modified by the user during the image review Brightness from 0 0 to 100 0 Contrast from 100 0 to 100 0 5 Standard Extended and Private Data Attributes Optima IGS 320 Optima IGS 330 Conformance Statement of D
42. from the con tour of the left ventricle traced by an ex pert Intercept coefficient in cm3 of the linear regression correction of the Left Ventricu lar volume This linear regression cor rects the Left Ventricular volume calculat ed by the Dodge s method from the con tour of the left ventricle traced by an ex pert Absolute Vertical position of the table in mm with respect to the table referential Down moving is positive The value of this attribute applies to the first frame of the Multi frame image Absolute Longitudinal position of the table in mm with respect to the table referen tial Head moving is positive The value of this attribute applies to the first frame of the Multi frame image Absolute Lateral position in mm of the table with respect to the table referential Left moving is positive The value of this attribute applies to the first frame of the Multi frame image Positioner angle for L arm in degrees Movement positive when rotating from RAO to LAO patient HFS no table rota tion Positioner angle for Pivot arm in degrees Movement is positive when rotating from RAO to vertical patient HFS no table ro tation Positioner angle for C arm in degrees Movement is positive when rotating from CAU to vertical patient HFS no table ro tation Zoom factor integer with no units ap plied by the user to the default image dis played row number of the origin of the zoomed area wi
43. in Y position of the Table Reference Point with respect to the Isocenter in mm relative to the first frame of the Multi frame image Positive values are downwards the horizontal plane in the vertical direction Contains as many values as number of frames Required if Table Motion is DYNAMIC Incremental change in Z position of the Table Reference Point with respect to the Isocenter in mm relative to the first frame of the Multi frame image Positive values are towards the CRA direction of the Isocenter Contains as many values as number of frames Required if Table Motion is DYNAMIC 5 Standard Extended and Private Data Attributes Optima IGS 320 Optima IGS 330 Conformance Statement of DICOM Direction 5537565 1 8EN Revision 1 Table Head Tilt Angle increment 0019 xxDA Vector of increments per frame relative to the first frame of the Table Head Tilt An gle Contains as many values as number of frames The first value of the vector is 0 0 Sent if Table Motion is DYNAMIC Table Cradle Angle increment 0019 xxDB Vector of increments per frame relative to the first frame of the Table Cradle An gle Contains as many values as number of frames The first value of the vector is 0 0 Required if Table Motion is DYNAM Table Vertical Position with respect to 0019 xx67 Table Top Vertical position with respect RIRP to RIRP of the equipment in mm Table motion downwards is positive The value of this attribute applies to the firs
44. is Gy acquired EV 113730 DCM Total Used If Flu Units EV s UCUM ei Fluoro Time oro is ac quired EV 113727 DOM Ac Units EV Gy m UCUM quisition Dose Area Prod Gy m uct Total EV 113729 DCM Ac MC Used Units EV Gy UCUM quisition Dose RP Total Gy EV 113855 DCM Total Units EV s UCUM s Acquisition Time EV 113731 DOM Total Units EV 1 UCUM no Number Radiographic units Frames Include only the number of frames of high dose ac quisitions do not include Fluoros EV 113780 DOM Refer 113860 DCM 15cm ence Point Definition from Isocenter toward Source EV 113780 DCM Refer IF Row 2 Not Used ence Point Definition Row 4 or Row 7 is present and Row 10 is not present 6 7 5 TID 1002 Observer Context Table 9 17 NL Rel with Pa VT Concept Name VM Req Condition Value Set Constraint rent Type 1 HAS OBS CODE EV 121005 DCM Ob MC Used 121007 DCM Device CONTEXT server Type SC DCM Person 2 HAS OBS INCLUDE DTID 1003 Person ob IFF Row 1 See TID 1003 CONTEXT server identifying attributes value 121006 DC M Per SON or Row 1 is absent HAS OBS INCLUDE DTID 1004 Device ob 1 MC See TID 1004 CONTEXT server identifying attributes 6 Standard Standard Extended and Private Templates Optima IGS 320 Optima IGS 330 Conformance Statement of DICOM Direction 5
45. ob sluhuj cej osoby alebo pacienta elektrick m pr dom mechanick alebo in ohroze nie Este manual de servicio s lo existe en ingl s Si el encargado de mantenimiento de un cliente necesita un idioma que no sea el ingl s el cliente deber encargarse de la traducci n del manual No se deber dar servicio t cnico al equipo sin haber consultado y comprendido este manual de servicio La no observancia del presente aviso puede dar lugar a que el proveedor de servi cios el operador o el paciente sufran lesiones provocadas por causas el ctricas mec nicas o de otra naturaleza Important Information VARNING SV OPOZORILO SL DIKKAT TR Important Information Optima IGS 320 Optima IGS 330 Conformance Statement of DICOM Direction 5537565 1 8EN Revision 1 Den har servicehandboken finns bara tillganglig pa engelska Om en kunds servicetekniker har behov av ett annat sprak an engelska ansvarar kunden for att tillhandahalla 6versattningstjanster F rs k inte utf ra service pa utrustningen om du inte har last och f rst r den har servicehandboken Om du inte tar h nsyn till den har varningen kan det resultera i skador pa servicete knikern operat ren eller patienten till f lid av elektriska st tar mekaniska faror eller andra faror Ta servisni priro nik je na voljo samo v angle kem jeziku Ce ponudnik storitve stranke potrebuje priro nik v drugem jeziku mora stranka za gotoviti prevod
46. this can be the same AE as the Storage SCP If there is an associated Storage Commitment SCP specified after each successful image transfer and or Dose transfer the system will automatically 1 Wait for a configurable delay time this allows re routing of images Dose SR s from Storage SCP to the Storage Commitment SCP if needed 2 Initiate a DICOM association to the Storage Commitment SCP to send the storage commitment request 3 3 4 2 Proposed Presentation Context Table Presentation Context Table Proposed Abstract Syntax Transfer Syntax e Storage Com 1 2 840 10008 20 1 Implicit VR Little Endian 1 2 840 10008 1 2 SCU None mitment Push Model Storage Com 1 2 840 10008 20 1 Explicit VR Little Endian 1 2 840 10008 1 2 1 SCU mitment Push Model SOP Specific DICOM Conformance Statement for the Storage Commitment Push Model SOP Class SCU The Storage Commitment will be requested for all SOP Instances for which the image transfer and or Dose SR transfer was successful Each request may include one or more SOP Instances depending on the number of images that were transferred For Dose SR s each request includes only one SOP Instance The AE uses DICOM network storage services to transfer SOP Instances which are to be committed The AE may request Storage Commitment for Instances of any of the Composite SOP Classes it supports as an SCU see Chapter 4 X Ray Angiography XA Information Object Implementation Chapter
47. 008 1115 1 Required if a sequence item is present gt gt Series Instance UID 0020 000E 1 Required if a sequence item is present gt gt Referenced SOP Sequence 0008 1199 1 Required if a sequence item is present gt gt gt Referenced SOP Class 0008 1150 1 Required if a sequence item is UID present gt gt gt Referenced SOP Instance 0008 1155 1 Required if a sequence item is UID present 4 4 2 SR Document Content Module Table 9 7 SR Document Content Module Attributes Observation DateTime 0040 A032 1C The date and time on which this Content Item was complet ed Content Template Sequence 0040 A504 Template that describes the content of this Content Item and its subsidiary Content Items Only a single Item shall be permitted in this sequence gt Mapping Resource 0008 0105 DCMR gt Template Identifier 0040 DB00 a ce 10001 Value Type 0040 A040 AA CONTAINER Continuity of Content Continuity of Content Content 0040 A050 0040 A050 te SEPARATE Concept Name Code Se 0040 A043 NN HEN quence gt Code Value Value 908010 908010 00 EN N 13701 Content Sequence 0040 A730 1C Sequence of Content Items with possible recursive subsid iary Content Items encoding the hierarchical tree of SR con tent gt Insert SR DocumentContent Module Recursive inclusion to create document content tree See section 1 4 4 2 1 for the list of supported templates Chapter 9
48. 031 Common Anatomic Regions 0008 0102 0008 0100 0008 0104 R FAB54 Neck Chest Abdomen and Pelvis T 43000 Coronary artery COM CI 5 3 Private Context Groups Table 9 11 Context ID 7452 Organizational Roles Coding Scheme Designator Code Value Code Meaning 0008 0102 0008 0100 0008 0104 SRT SRT SRT SRT SRT SRT SRT SRT SRT SRT SRT SRT SRT SRT SRT SRT SRT SRT SRT SRT RT Chapter 9 X ray Radiation Dose Structured Report 129 Information Object Implementation Optima IGS 320 Optima IGS 330 Conformance Statement of DICOM Direction 5537565 1 8EN Revision 1 5 4 Configurable Context Groups Table 9 12 Context ID 7453 Performing Roles Coding Scheme Designator Code Value Code Meaning 0008 0102 0008 0100 0008 0104 DCM 130 5 Standard Extended and Private Context Groups Optima IGS 320 Optima IGS 330 Conformance Statement of DICOM Direction 5537565 1 8EN Revision 1 6 Standard Standard Extended and Private Templates The Product supports the Standard Extended and Private Templates defined in the following sections 6 1 Standard Templates The Product supports the following standard templates for SOP Instances created by this product 6 1 1 Template ID 10001 X Ray Radiation Dose Table 9 13 NL Rel with Pa VT Concept Name VM Req Condition Value Set Constraint rent Type 1 CONTAINER EV 113701 DOM X Ray 1 M Radiation Dose Report 2 HAS CON CODE EV 121058 DOM
49. 1 5 3 Private Group GEMS_DL_IMG_01 Private Group Private Group GEMS_DL_IMG_01is modeled as part of the Image Information Entity Table 5 16 Private Group GEMS_DL_IMG_01 Attribute Name 92 Attribute Description and Use number of the source series for a photo no units number of the source image for a photo no units Frame number of original image no units g bd i SEN patient position per image 0019 xxC7 CS 1 Patient position descriptor relative to the equipment The defined terms are head first prone HFP head first supine HFS head first decubitus right HFDR head first decubitus left HFDL feet first decubitus right FFDR feet first decubitus left FFDL feet first Prone FFP feet first Supine FFS Body Part Examined of current Image 0019 xx70 Patient head to end position 0019 xx71 Text description of the part of the body ex amined of this image Tabletop to patient head distance in cm PHOTO frame on which the calibration was per formed Enumerated sphere catheter or segment only one if extended calibration the image number of the original calibration if extended calibration the frame number of the original calibration 0 1 or 2 no units internal label 0019 xx4C calibration frame 0019 xx81 calibration object 0019 xx82 calibration object size mm calibration factor calibration date calibration time calibration accuracy calibrati
50. 1 Define the parameter for temporal denoising TNR Algorithm Values 2 1 0 1 or 2 TNR Strength 0027 xx16 FL 1 Strength of the filtering values between 0 and 1 TNR Threshold 0027 xx17 US 1 Threshold for the TNR algorithm Values between 1 and 4096 Current spatial filter strength v2 0027 xx18 IS 1 The strength of the spatial filters applied during DL review Values are from 1 to 9 value 0 is equivalent to an unfiltered im age This value corresponds to the v2 of the filter design 80 5 Standard Extended and Private Data Attributes Optima IGS 320 Optima IGS 330 Conformance Statement of DICOM Direction 5537565 1 8EN Revision 1 Chapter 5 SC Information Object Implementation 1 Introduction This section specifies the use of the DICOM SC Image IOD to represent the information included in SC images produced by this implementation Corresponding attributes are conveyed using the module construct Chapter 5 SC Information Object Implementation 81 Optima IGS 320 Optima IGS 330 Conformance Statement of DICOM Direction 5537565 1 8EN Revision 1 2 Optima Mapping of DICOM Entities The Optima maps DICOM Information Entities to local Information Entities in the product s database and user interface Table 5 1 Mapping of DICOM Entities to Optima Entities DICOM IE Optima Entity 82 2 Optima Mapping of DICOM Entities Optima IGS 320 Optima IGS 330 Conformance Statement of DICOM Direction 5537565 1 8EN Re
51. 18 1151 are not present X Ray Tube Current 0018 1151 o B Average Pulse Width 0018 1154 Radiation Mode 0018 115A Image and Fluoroscopy Area 0018 115E Dose product Intensifier Size 0018 1162 Focal Spot 0018 1190 Type of Filters 0018 1161 Exposure in pAs 0018 1153 4 5 11 X Ray Collimator Module Table 4 19 X Ray Collimator Module Attributes Collimator Shape 0018 1700 Collimator Left Vertical Edge 0018 1702 Identify the grid Defined Terms are IN a grid is positioned and NONE no grid is used Average width of Xray pulse in msec Specifies Xray radiation mode CONTINU OUS PULSED XRay dose measured in dGy cm cm to which the patient was exposed for the ac quisition of this image plus any Non digital ly recorded fluoro which may have been performed to prepare for the acquisition of this image 204 8 for 20cm detector 307 2 for 30cm detector and 409 6 for 40cm detector Nominal focal spot size in mm used to ac quire this image Type of filter s inserted into the X Ray beam e g wedges The exposure expressed in pAs for exam ple calculated from Exposure Time and X Ray Tube Current Type Attribute Description RECTANGULAR Collimator Right Vertical Edge 0018 1704 Collimator Upper Horizontal Edge 0018 1706 Collimator Lower Horizontal Edge 0018 1708 Chapter 4 X Ray Angiography XA Information Object 65 Implementation 4 5 12 X Ray Table Module Table 4 20 X
52. 4 5 3 SC Image Module Table 5 11 SC Image Module Attributes EE a of Secondary Capture 0018 1012 date the Secondary Capture Image was captured Time of Secondary Capture 0018 1014 Fe The time the Secondary Capture Image was captured 4 5 4 VOI LUT module Table 5 12 VOI LUT module Attributes Attribute Name Attribute Description 4 5 5 SOP Common Module Table 5 13 SOP Common Module Attributes Attribute Name Attribute Description SOP Class UID 0008 0016 1 2 840 10008 5 1 4 1 1 7 SOP Instance UID 0008 0018 1 Restricted to 64 characters internally gener ated as follows registered prefix for GEMS 2 Registered prefix within GEMS a b c encoded mac address of the DL host x y z unique id protected against reinstal lation and re entrance Specific Character Set 0008 0005 ISO IR 100 Instance Number 0020 0013 Internally generated starting at 1 Chapter 5 SC Information Object Implementation 89 Optima IGS 320 Optima IGS 330 Conformance Statement of DICOM Direction 5537565 1 8EN Revision 1 5 Standard Extended and Private Data Attributes The Product supports the Standard and Private Attributes defined in the following sections in Standard Extended SC SOP Instances as Type 3 data elements 5 1 Standard Attributes The product supports the following attributes not specified in the Secondary Capture IOD in SOP Instances as Type 3 data elements Table 5 14 Standard Extent
53. 537565 1 8EN Revision 1 6 1 6 TID 1003 Person Observer Identifying Attributes Table 9 18 N VT Concept Name V Re Value Set Constraint L wi Mio i Ty ti pe Il li d acd NOVO ve E A ME 2 TEXT EV 121009 DCM Person Observer s Organ 1 U Not Used ization Name 3 COD EV 121010 DCM Person Observer s Role in 1 U See BCID 7452 E the Organization 4 COD EV 121011 DCM Person Observer s Role in 1 U See BCID 7453 E this Procedure 6 1 7 TID 1004 Device Observer Identifying Attributes Table 9 19 NL Rel with Pa VT Concept Name VM Req Condition Value Set Constraint rent Type UIDREF EV 121012 DCM Device Defaults to Implementation Observer UID UID EV 121013 DCM Device Defaults to value of Sta Observer Name tion Name 0008 1010 in General Equipment Mod ule EV 121014 DCM Device Defaults to value of Manu Observer Manufacturer facturer 0008 0070 in General Equipment Mod ule EV 121015 DCM Device Defaults to value of Manu Observer Model Name facturer s Model Name 0008 1090 in General Equipment Module EV 121016 DCM Device Defaults to value of Device Observer Serial Number Serial Number 0018 1000 in General Equipment Module EV 121017 DCM Device Not Used Observer Physical Loca tion during observation 6 1 8 TID 1020 Person Participant Table 9 20 EV 113870 DCM Person Defaults to Performing Name Ph
54. 5537565 1 8EN Revision 1 Attribute Name Attribute Description and Use Pre Minimum Lumen Diameter Pre Average Diameter Pre Stenosis Length Pre Stenosis Pre Geometric Area Reduction Post Catheter Name Post Catheter Size Post Reference Diameter Post Minimum Lumen Diameter Post Average Diameter Post Stenosis Length Post Stenosis Post Geometric Area Reduction 0009 xx14 0009 xx15 0009 xx16 0009 xx17 0009 xx18 0009 xx21 0009 xx22 0009 xx23 0009 xx24 0009 xx25 0009 xx26 0009 xx27 0009 xx28 5 7 Private Group QUANTITATIVE_RESULTS Pre procedure Minimum Lumen Diame ter in millimeters Required if Analysis Type 0009 1100 is PRE or PRE_POST Pre procedure Average Diameter in milli meters Required if Analysis Type 0009 1100 is PRE or PRE_POST Pre procedure Stenosis Length in milli meters Required if Analysis Type 0009 1100 is PRE or PRE_POST Pre procedure Stenosis as a percentage Required if Analysis Type 0009 1100 is PRE or PRE POST Pre procedure Geometric Area Reduc tion as a percentage Reguired if Analy sis Type 0009 1100 is PRE or PRE POST User description of post procedure cathe ter Reguired if Analysis Type 0009 1100 is POST or PRE POST Size of post procedure catheter in milli meters Reguired if Analysis Type 0009 1100 is POST or PRE POST Post procedure Reference Diameter in
55. 565 1 8EN Revision 1 This page left intentionally blank 100 5 Standard Extended and Private Data Attributes Optima IGS 320 Optima IGS 330 Conformance Statement of DICOM Direction 5537565 1 8EN Revision 1 Chapter 6 Modality Worklist Information Model Definition 1 Introduction This section specifies the use of the DICOM Modality Worklist Information Model used to organize data and against which a Modality Worklist Query will be performed Chapter 6 Modality Worklist Information Model 101 Definition Optima IGS 320 Optima IGS 330 Conformance Statement of DICOM Direction 5537565 1 8EN Revision 1 2 Worklist Query Module Table 102 See DICOM PS 3 3 and PS 3 4 for a complete definition of the entities modules and attributes Table 6 1 Modality Worklist Information Model Modules Scheduled Procedure Step SOP Common Section 3 1 1 SOP Common Module Section 3 1 2 Scheduled Procedure Step Scheduled Procedure Step Module Requested Procedure Section 3 2 Common Requested Proce Requested Procedure dure Entity Modules Imaging Service Request Section 3 3 Common Imaging Service Imaging Service Request Request Entity Modules Visit Visit Identification Identification 2 Worklist Query Module Table Optima IGS 320 Optima IGS 330 Conformance Statement of DICOM Direction 5537565 1 8EN Revision 1 3 Worklist Query Module Definitions Please refer to DICOM Standard PS 3 3 Information Object Definitions for a description o
56. 8 0070 GE MEDICAL SYSTEMS From Service User Interface configured at the instal lation of the system Restricted to 64 characters From Service User Interface configured at the instal lation of the system Restricted to 1024 characters AE Title of the system that created the DICOM image DL Manufacturer s serial number of the equipment From internal configuration of the machine DL application version Identifier of the gantry or positioner Value LC Internally generated starting at 1 Patient direction of the rows and columns of the image This attribute contains the values corresponding to the first frame Same as acquisition date 0008 0022 Same as acquisition time 0008 0032 See Table 4 17 Image type YYYYMMDD restricted to 8 characters date the se quence was acquired HHMMSS XXX restricted to 10 characters From User Interface restricted to 64 characters Unique identification of the irradiation event s associ ated with the acquisition of this image A sequence which identifies the set of image SOP Class Instance pairs of the image which were used to derive this image Uniquely identifies the referenced SOP Class Uniquely identifies the referenced SOP Instance Describes the purpose for which the reference is made that is what role the source image or frame s played in the derivation of this image 61 Optima IGS 320 Optima IGS 330 Conformance Statement of
57. ATE Private Radiation Dose Private Radiation Dose Sequence 0027 01 Xx01 Kn E a a Private Radiation Dose Private Radiation Dose Sequence a El Number 0027 xx02 A number that identifies the image image number gt Run Time Time Runtime f 0027 0027 03 Sea Time the Series started the Series started sFramespersec gt Frames persee sec 0027 0027 05 a Number of frames per second of frames per second gt Plane 0027 xx06 Plane on which the current image is ac quired Defined terms FR for Monoplane 0027 xx07 Peak kilo voltage output of the x ray gener ator used in kv pm er xx10 CSL Duration of xray exposure in msec eS 0027 xx11 Position of the Xray Image Intensifier about the patient from the RAO to LAO direction where movement from RAO to vertical is positive in degrees gt Rotation 0027 xx12 Position of the Xray Image Intensifier about the patient from the CAU to CRA direction where movement from CAU to vertical is positive in degrees gt Focal Distance 0027 xx13 DS 1 Distance in mm from source to detector center gt Field of View 0027 xx14 DS 1 Dimensions of the image Intensifier Field of View in mm gt Table Vertical Position 0027 xx15 DS 1 Absolute Vertical position of the table in mm with respect to the table referential Down moving is positive The value of this attribute applies to the first frame of the Multi frame image Chapter
58. Attributes AWbueName Name AttributeName Tag Type Attribute Description Frame Time 0018 1063 1C Nominal time in msec between frames Required if frame increment pointer 0028 0009 points to frame time 62 4 Information Module Definitions Optima IGS 320 Optima IGS 330 Conformance Statement of DICOM Direction 5537565 1 8EN Revision 1 Attribute Name Ta Type Attribute Description Frame time vector 0018 1065 1C An array which contains the real time increments in msec between frames for a Multi frame image zu quired if Frame Increment Pointer 0028 0009 points to Frame Time Vector If exist the interval time values of the intervals during acquisition e g between two sec tions or segments Start Trim 0008 2142 EX The frame number of the next frame after the last trial image Stop Trim Stop Trim 0008 2143 3 Last frame of the multi frame image Last frame of the multi frame image frame of the multi frame image Recommended Display Frame 0008 2144 ES Number of frames per second truncated to integer Rate 0018 0040 Number of frames per second truncated to integer 4 5 5 Multi Frame Module This module is used only if pixel data is Multi Frame Cine data Table 4 12 Multi Frame Module Attributes Attribute Name a Type Attribute Description Number of Frames 0028 0008 ME nsus Internally generated by acquisition system Maximum 460 Frame Increment P
59. CEVENT REPORT Storage Commitment Result the Optima will mark all SOP Instances for which a success status is indicated in the user interface as successfully storage committed When all Instances associated with a Study or a Patient are Archived the Study or Patient will also be shown on the user interface with status Chapter 3 Network Conformance Statement 45 46 Optima IGS 320 Optima IGS 330 Conformance Statement of DICOM Direction 5537565 1 8EN Revision 1 COMPLETED Only Patients Studies or Instances marked COMPLETED may be deleted by user action without double confirmation If the Storage Commitment Result indicates any failure status an error message will be displayed to the user and the error including the Failure Reason 0008 1197 attribute values will be written to the error log Any retry will be manually reinitiated On retry the AE will transfer again the instances and then initiate a new Storage Commitment Request for them The list of specific Failure Reason Codes that this AE will be able to process is described below Failure Application Behavior When Receiving Reason Code Reason 0110H Processing failure Display error in network queue 0112H No such object instance Display error in network queue 0213H Resource limitation Display error in network queue lasse eeenmemer The AE will return the standard status codes in NCEVENT REPORT RSP message as specified below Service Status Status Codes Furt
60. D 0008 1150 filled with the value 1 2 840 10008 3 1 2 3 1 and A SOP Instance UID 0008 1155 filled with value stored in Study Instance UID 0020 000D gt gt Referenced SOP Class UID 0008 1150 1 Not Sent 1 filled from worklist If not available filled with value 1 2 840 10008 3 1 2 3 1 gt gt Referenced SOP Instance UID 0008 1155 1 Not Sent 1 filled from worklist If not available filled with study in stance UID 0020 000D gt Accession Number 0008 0050 2 Sent EMPTY 2 filled from Worklist Can be updated through User In terface gt Requested Procedure ID 0040 1001 2 Sent Empty 2 From Worklist gt Requested Procedure Code Sequence gt Requested Procedure Code Sequence Code Sequence 0032 1064 1064 3 Not Sent Not Sent 3 From Wed From Worklist gt gt Code Value EH 0100 E M Not Sent HL M From Worklist Sent if the Sequence i is not Empty gt gt Coding Scheme Designator 0008 0102 1 Not Sent 1 From Worklist Sent if the Sequence is not Empty gt gt Code Meaning 0008 0104 1 Not Sent 1 From Worklist Sent if the Sequence is not Empty gt Requested Procedure Description gt Requested Procedure Description Description 0032 1060 0032 1060 2 Sent Empy Sent 2 Sent Empy 2 From Wed From Worklist 112 4 Modality Performed Procedure Step Module Definitions Optima IGS 320 Optima IGS 330 Conformance Statement of DICOM Direction 5537565 1 8EN
61. DE DTID 10004 Accumulat XOR row See TID 10004 Accumu ed Projection X Ray Dose 11 IFF TID lated Projection X Ray 10001 Dose Row 2 113704 DCM Pro jection X 10 gt CONTAINS INCLUDE DTID 10005 Accumulat Not Used ed Mammography X Ray 10 IFF TID Dose 10001 Row 2 P5740010 SRT Mammog raphy 132 6 Standard Standard Extended and Private Templates Optima IGS 320 Optima IGS 330 Conformance Statement of DICOM Direction 5537565 1 8EN Revision 1 6 1 3 TID 10003 Irradiation Event X Ray Data Type Extensible Table 9 15 NL Rel with Pa VT Concept Name VM Req Condition Value Set Constraint rent Type 1 CONTAINER EV 113706 DCM Irradi 1 ation Event X Ray Data 2 HAS CON CODE EV 113764 DOM Ac CEPT MOD quisition Plane 3 CONTAINS DATETIME DT 111526 DOM Date Time Started CO NTAINS CODE EV 113721 DCM Irradi ation Event Type CONTAINS TEXT EV 125203 DCM Ac quisition Protocol CONTAINS pee EV T D0005 SRT Ana perc structure HAS CON CODE EV G C171 SRT Later CEPT MOD ality CONTAINS TEXT EV 113780 DOM Refer ence Point Definition CONTAINS CODE EV 113780 DOM Refer ence Point Definition CONTAINS UIDREF EV 113769 DCM Irradi ation Event UID EV 113606 DCM Label Type Chapter 9 X ray Radiation Dose Structured Report Information Object Implementation al WE ed 113622 DCM Single
62. DICOM Direction 5537565 1 8EN Revision 1 Attribute Name Attribute Description gt gt Code Value 0008 0100 Required if sequence item is present gt gt Coding Scheme Designator 0008 0102 Required if sequence item is present gt gt gt gt Code meaning gt gt Code meaning 9080104 9080104 1 Required if sequence item is present Derivation Description 0008 2111 Hardcoded to STENTVESSELVIZ for the stentvessel viz post processed image 4 5 2 Image Pixel Module Table 4 9 Image Pixel Module Attributes Attribute Name Attribute Description Photometric Interpretation Photometric Interpretation 0028 0004 m MONOCHROME2 Rows 0028 0010 Depends on the size of the FOV imaged region of the X ray detector and the re sampling applied during the DICOM conversion Possible values are 1024 1000 864 736 608 750 800 512 and 500 Columns 0028 0011 Depends on the size of the FOV imaged region of the X ray detector and the re sampling applied during the DICOM conversion Possible values are 1024 1000 864 736 608 750 800 512 and 500 EE pe mm ff 4 5 3 Contrast Bolus Module This module is used only if contrast media was used in this image Table 4 10 Contrast Bolus Module Attributes Attribute Name Attribute Description Contrast Bolus Agent 0018 0010 EMPTY 4 5 4 Cine Module This module is used only if pixel data is Multi Frame Cine data Table 4 11 Cine Module
63. EV 111636 DCM En IFF TID Not Used trance Exposure at RP 10001 Row 2 P5 40010 SRT Mammog raphy CONTAINS EV 112011 DCM Posi Position of the Xray Image tioner Primary Angle Intensifier about the pa tient from the RAO to LAO direction where movement from RAO to vertical is positive Units EV deg UCUM deg 13 tient from the CAU to CRA direction where movement from CAU to vertical is positive Units EV deg UCUM deg CONTAINS EV 112012 DCM Posi XOR Row Position of the Xray Image tioner Secondary Angle 19 Intensifier about the pa CONTAINS EV 113739 DCM Posi IFF Row 4 Units EV deg UCUM tioner Primary End Angle value deg 113613 DCM Rotational Acquisi tion 6 Standard Standard Extended and Private Templates Optima IGS 320 Optima IGS 330 Conformance Statement of DICOM Direction 5537565 1 8EN Revision 7 NL Rel with Pa Concept Name Req Condition Value Set Constraint rent Type CONTAINS NUM EV 113740 DOM Posi tioner Secondary End An gle IFF Row 4 Units EV deg UCUM value 113613 DCM Ro tational Ac quisition CONTAINS NUM EV 113770 DCM Col UC XOR Rows Not Used umn Angulation 15 16 CONTAINS NUM EV 113790 DCM Colli Minimum area between mated Field Area the FOV area and the col limated area based on col limator coordinates and the pix
64. ICOM Direction 5537565 1 8EN Revision 1 DAP of currect record 0019 xxE0 FL 1 XRay dose measured in dGy cm cm to which the patient was exposed for the acquisition of this image auto injection enabled 0019 xxA4 Enumerated YES NO injection phase 0019 xxA5 PRE POST injection delay 0019 xxA6 DS 1 Number of miliseconds between the in jection and the reference frame Always positive reference injection frame number 0019 xxA7 Frame number of the reference frame re lated to the auto injection delay recommended display frame rate float 0019 xxB8 Recommended rate float at which the frames of a Multi frame image should be displayed in frames second fov dimension double 0019 xx0B 2 Dimensions of the image Intensifier Field of View in mm double resolution Value in floating point resolution whose trunca ture is 0018 1149 Possible values are 4001400 OR 3201320 OR 3001300 OR 2001200 OR 172 8 172 8 OR 160 160 OR 147 2 147 2 OR 121 6 121 6 sensor feedback 0019 xx9A d Internally calculated dose per frame in nGy 0019 xxA9 Exposure optimization conditions equiv alent patient thickness in cm If it con tains only one value it corresponds to the last frame of the multi frame image If it contains more than one it shall contain as many values as frames in the image kVp actual vector 0019 xxAF Exposure conditions kVp This is a mul ti valued attribute that contains the kVp for e
65. Image Information Entity Table 4 26 Private Group DLX SERIE 01 Attribute Name Attribute Description and Use adx acq mode 0019 xx14 IS 1 This is a numerical code of the acquisi tion mode and is used in AW to auto start applications Defined codes for Opti ma are 100 Fluoro Store 2 Cardiac NoSub 32 Auto DSA 116 Bolus for Pasting Angio Sub 126 Chase 129 3D Calibration 140 NoSub 3D 128 Sub 3D MAD s Gm i rs Mid z series Chapter 4 X Ray Angiography XA Information Object 69 Implementation 70 Optima IGS 320 Optima IGS 330 Conformance Statement of DICOM Direction 5537565 1 8EN Revision 1 Attribute Name Attribute Description and Use Lambda cm pincushion distortion 0019 xx24 Slope LV regression 0019 xx25 Intercept LV regression 0019 xx26 table vertical position 0019 xx21 table longitudinal position 0019 xx22 table lateral position 0019 xx23 angle value 1 0019 xx01 angle value 2 0019 xx02 angle value 3 0019 xx03 user zoom factor 0019 xx18 0019 xx19 0019 xx1A Coefficient of the pincushion distortion model of the Image Intensifier in cm 1 This model allows correcting the position of a point of the image as function of the distance to the center of the image Slope coefficient unit less of the linear regression correction of the Left Ventricu lar volume This linear regression cor rects the Left Ventricular volume calculat ed by the Dodge s method
66. MIC angle 1 increment 0019 xx97 DS 1 N Incremental change in angle_value_1 sent if positioner motion is dynamic angle 2 increment 0019 xx98 Incremental change in angle_value_2 sent if positioner motion is dynamic angle 3 increment 0019 xx99 Incremental change in angle_value_3 sent if positioner motion is dynamic ISO x versus RIRP 0019 xx7A Position in mm of the Frontal respective ly Lateral Isocenter in the RIRP referen tial along the X axis Positive values are towards the X direction of the Isocenter Coordinate System LAO direction The value of this attribute applies to the first frame of the Multi frame image Chapter 4 X Ray Angiography XA Information Object 77 Implementation 78 Optima IGS 320 Optima IGS 330 Conformance Statement of DICOM Direction 5537565 1 8EN Revision 1 Position in mm of the Frontal respective ly Lateral Isocenter in the RIRP referen tial along the Y axis Positive values are downwards the horizontal plane in the vertical direction The value of this attrib ute applies to the first frame of the Multi frame image ISO y versus RIRP 0019 xx7B ISO z versus RIRP 0019 xx7C Position in mm of the Frontal respective ly Lateral Isocenter in the RIRP referen tial along the Z axis Positive values are towards the CRA direction of the Isocen ter The value of this attribute applies to the first frame of the Multi frame image MEE Increment vector of ISO_x_versus
67. MS_DL_STUDY_01 AttributeName O Name Attribute Description and Use Attribute Description and Use and Use pps oe EH xx80 EUM SE dose delivered to the patient during the Performed Procedure Step in mGy pps total dap 0015 xx81 Cumulative dose area product for the Per formed Procedure Step in cGy cm2 pps fluoro dap 0015 xx82 DS 1 Cumulative dose area product for the fluoro acquisitions performed during the Per formed Procedure Step in cGy cm2 pps fluoro time 0015 xx83 IS d Total time of fluoroscopy during the Per formed Procedure Step in seconds pps_record_dap 0015 xx84 DS 1 Cumulative dose area product for the re cord acquisitions performed during the Per formed Procedure Step in cGy cm2 pps record time 0015 xx85 IS 1 Total time of record acquisitions during the Performed Procedure Step in seconds 6 Standard Extended and Private Data Attributes Optima IGS 320 Optima IGS 330 Conformance Statement of DICOM Direction 5537565 1 8EN Revision 1 AttributeName O Name Attribute Description and Use DEDE NE of record runs MCN OE EC number of exposures made during the Performed Procedure Step no units 6 3 Private Group GEMS DLX DOSE 01 Private Group GEMS DLX DOSE 01 is modeled as part of the Performed Procedure Step Information Entity Table 8 9 Private Group GEMS DLX DOSE 1 Attribute Name Attribute Description and Use Dose Cumulation 0027 5x16 EE RE RR Defined terms CUMUL
68. Optima IGS 320 Optima IGS 330 Conformance Statement of DICOM OPERATING DOCUMENTATION 5537565 1 8EN Revision 1 Optima IGS 320 Optima IGS 330 Conformance Statement of DICOM Direction 5537565 1 8EN Revision 1 ATTENTION LES APPAREILS A RAYONS X SONT DANGEREUX A LA FOIS POUR LE PATIENT ET POUR LE MANIPULATEUR SI LES MESURES DE PROTECTION NE SONT PAS STRICTEMENT APPLIQUEES Bien que cet appareil soit construit selon les normes de s curit les plus s v res la source de rayonnement X repr sente un danger lorsque le manipulateur est non qualifi ou non averti Une exposition excessive au rayonnement X entraine des dommages l organisme Par cons quent toutes les pr cautions doivent tre prises pour viter que les personnes non autoris es ou non qualifi es utilisent cet appareil cr ant ainsi un danger pour les autres et pour elles m mes Avant chaque manipulation les personnes qualifi es et autoris es se servir de cet appareil doivent se renseigner sur les mesures de protection tablies par la Commission Internationale de la Protection Radiologique Annales 26 Recommandations de la Commission Internationale sur la Protection Radiologique et les normes nationales en vigueur WARNING X RAY EQUIPMENT IS DANGEROUS TO BOTH PATIENT AND OPERATOR UNLESS MEASURES OF PROTECTION ARE STRICTLY OBSERVED Though this equipment is built to the highest standards of electrical and mechanical safety the useful x ray beam becomes a source o
69. Optima IGS 320 Optima IGS 330 Conformance Statement of DICOM Direction 5537565 1 8EN Revision 1 Attribute Name Attribute Description and Use RCA Single Total LV contour Percent 0009 xx70 RCA Single Total LV contour Percent RCA Multiple Hypokinesia in Region 0009 xx71 RCA Multiple Hypokinesia in Region RCA Multiple Hyperkinesia in Opposite 0009 xx72 FL 1 RCA Multiple Hyperkinesia in Opposite Region Region RCA Multiple Total LV contour Percent 0009 xx73 RCA Multiple Total LV contour Percent LAD Single Hypokinesia in Region 0009 xx74 Pata LAD Single Hypokinesia in Region LAD Single Hyperkinesia in Opposite Re 0009 xx75 eeng ui da LAD Single Hyperkinesia in Opposite Re gion gion LAD Single Total LV contour Percent LAD Single Total LV contour Percent Total LV contour Percent 0009 x 76 xx76 1 LAD Single Total LV contour Percent LAD Single Total LV contour Percent Total LV contour Percent LAD Multiple Hypokinesia in Region 0009 xx77 ors LAD Multiple Hypokinesia in Region LAD Multiple Hyperkinesia in Opposite 0009 xx78 LAD Multiple Hyperkinesia in Opposite Region Region LAD Multiple Total LV contour Percent LAD Multiple Total LV contour Percent Total LV contour Percent 0009 79 P 1 LAD Multiple Total LV contour Percent LAD Multiple Total LV contour Percent Multiple Total LV contour Percent EEE O FL 1 ON Boase Era Syn voere ir A E oe Se Venn Gere OR Twee Seven
70. Re quested Procedure Code Sequence shall contain only a single item gt gt Code Value 0008 0100 Required if a sequence item is present gt gt Code schema designator 0008 0102 Required if a sequence item is present gt gt Code meaning gt gt Code meaning 0008 0104 Required if a sequence item is present ifa Required if a sequence item is present item is present gt Scheduled Procedure Step ID 0040 0009 1C Identifier that identifies the Scheduled Proce dure Step gt Scheduled Procedure Step Description 0040 0007 Institution generated description or classifica tion of the Scheduled Procedure Step to be performed gt Scheduled Protocol Code Sequence 0040 0008 Sequence describing the Scheduled Protocol following a specific coding scheme gt gt Code Vale Value 0008 0100 Required if a sequence item is present Required if a sequence item is present a sequence item is present gt gt Code schema ELT TNCS 0008 0102 Required if a sequence item is present 0008 0104 Required if a sequence item is present 4 4 Equipment Entity Modules 4 4 1 General Equipment Module Table 5 7 General Equipment Module Attributes Attribute Name Attribute Description Institution Name 0008 0080 3 From Service User Interface configured at the installation of the system Restricted to 64 characters Institution Address 0008 0081 3 From Service User Interface configured at the installation o
71. Section 4 4 2 SR Document Content Module Standard Standard Extended and Private Templates are further described in Standard Standard Extended and Private Templates Table 9 2 Structure Report IOD Modules Entity Name Module Name Reference Patient Patient Used Chapter 4 Section 4 1 Table 4 3 Patient Module Attributes Specimen Identification Not Used N A Clinical Trial Subject Not Used N A Study General Study Used Section 4 1 Table 9 3 Gener al Study Module Attributes Patient Study Chapter 4 Section 4 2 2 Table Used 4 5 Patient Study Module At tributes Clinical Trial Study Not Used Series SR Document Series Section 4 2 Table 9 4 SR Used Document Series Module At tributes Clinical Trial Series Not Used ONA N A Frame Of Reference Synchronization Not Used N A Equipment General Equipment Used Section 4 3 Table 9 5 Gener al Equipment Module Attributes Document SR Document General Section 4 4 1 Table 9 6 SR Used Document General Module At tributes SR Document Content Section 4 4 2 Table 9 7 SR Used Document Content Module At tributes SOP Common Used Section 4 4 3 Table 9 9 SOP Common Module Attributes Chapter 9 X ray Radiation Dose Structured Report 123 Information Object Implementation Optima IGS 320 Optima IGS 330 Conformance Statement of DICOM Direction 5537565 1 8EN Revision 1 4 Information Module Definitions Please refer to DICOM Part 3 Information Object Definitions for a descriptio
72. Study Id 0020 0010 For scheduled case Study ID 0020 0010 is equal to the Requested Procedure ID Performed Protocol Code Sequence 0040 0260 0040 1001 extracted from the Modality gt Code Value 0008 0100 ME ETE 2 Worklist item For an unscheduled case Study ID 0020 0010 will be equal to the value entered by the user in UI Coding Scheme Designator 0008 0102 gt Code Meaning 0008 0104 3 3 Scheme Designator Performed Series Sequence 0040 0340 2 3 N Create Always sent EMPTY N Set Attributes of the Series that com prise this Modality Performed Procedure Step The Sequence may have one or more Items EGAL NEL EES ETE N BEE dd MERE ES Mi md EE RE Sequence describing the Protocol per formed for this Procedure Step This se quence may have zero or more Items The Code Value 0008 0100 is an identifier that is unambiguous within the Coding Scheme denoted by Coding Scheme Desig nator 0008 0102 and Coding Scheme Ver sion 0008 0103 The attribute Coding Scheme Designator 0008 0102 identifies the coding scheme in which the code for a term is defined The Code Meaning 0008 0104 is text which has meaning to a human and which conveys the meaning of the term defined by the combination of Code Value and Coding Name of the physician s administering this Series gt Performing Physician s Name 0008 1050 gt Protocol Name 0018 1030 gt Operator s Name 0008 1070 gt Series Instance
73. User Interface restricted to 64 characters Value con ing Study tains only one component May not be sent Reference Study Sequence 0008 1110 From Worklist The sequence may have zero or more Items gt Reference SOP Class UID 0008 1150 From Worklist Required if a sequence item is present gt Reference SOP instance 0008 1155 From Worklist Required if a sequence item is present UID Performed Procedure Code 0008 1032 A Sequence that conveys the type of procedure performed Sequence Present if MPPS option is enabled May not be sent gt Code Value 0008 0100 Required if a sequence item is present gt Code schema designator 0008 0102 Required if a sequence item is present 0008 0104 WES Required if a sequence item is present 2 2 2 2 2 3 3 3 1 1 3 1C 1C 1C 4 2 2 Patient Study Module 58 Table 4 5 Patient Study Module Attributes Attribute Name Attribute Description Patient s Age 0010 1010 3 Either from User Interface or Calculated from Patient s Birth Date 0010 0030 Three digits followed by one letter In Years Y Months M Weeks W or Days D May not be sent Patient s Size 0010 1020 3 From User Interface or worklist restricted to 16 characters May not be sent 4 Information Module Definitions Optima IGS 320 Optima IGS 330 Conformance Statement of DICOM Direction 5537565 1 8EN Revision 1 Attribute Name Attribute Description Patient s Weight 0010 1030 3 Fr
74. Volume ml Simspon s Stroke Volume mi S Simspon s Stroke Volume mi Volume ml 0009 xx66 EEN TN Simspon s Stroke Volume ml S Simspon s Stroke Volume ml Volume ml Simpson Ejection Fraction 0009 xx67 EH Simspon s Ejection Fraction in percent 100 CFX Single Hypokinesia in Region CFX Single Hypokinesia in Region Hypokinesia in Region 0009 xx68 x68 FL 1 CFX Single Hypokinesia in Region CFX Single Hypokinesia in Region Hypokinesia in Region CFX Single Hyperkinesia in Opposite Re 0009 xx69 iaa CFX Single Hyperkinesia in Opposite Re gion gion CFX CFX Single Total LV contour Percent Total LV contour Percent 0009 xx6A xea IS 01 ex CFX Single Total LV contour Percent Total LV contour Percent fe CFX Multiple Hypokinesia in Region Hypokinesia in Region EZ a ee CFX Multiple Hypokinesia in Region Hypokinesia in Region e Multiple Hyperkinesia in Opposite Ld EE E AO Multiple Hyperkinesia in Opposite Region Region CFX Multiple Total LV contour Percent 0009 xx6D a CFX Multiple Total LV contour Percent RCA Single Hypokinesia in Region RCA Single Hypokinesia in Region Hypokinesia in Region 0009 xx6E xx6E FL 1 RCA Single Hypokinesia in Region RCA Single Hypokinesia in Region Hypokinesia in Region RCA Single Hyperkinesia in Opposite 0009 xx6F ee Single Hyperkinesia in Opposite Region Region 5 Standard Extended and Private Data Attributes
75. XVIKO O PBIC OTO XEIPIOTH rj oTov AGBEVA ATT NAEKTPOTTANEIA urxaviko g rj GAAOUG KIVOUVOUG FIGYELMEZTETES Ezen karbantartasi k zik nyv kiz r lag angol nyelven rhet el HU e Haa vev szolg ltat ja angolt l elt r nyelvre tart ig nyt akkor a vev felel ss ge a ford t s elk sz ttet se e Ne pr b lja elkezdeni haszn lni a berendez st am g a karbantart si k zik nyvben le rtakat nem rtelmezt k e Ezen figyelmeztet s figyelmen k v l hagy sa a szolg ltat m k dtet vagy a beteg ram t s mechanikai vagy egy b vesz lyhelyzet miatti s r l s t eredm nyezheti Important Information 5 ADVORUN IS AVVERTENZA IT ue JA au KO BRIDINAJUMS LV Optima IGS 320 Optima IGS 330 Conformance Statement of DICOM Direction 5537565 1 8EN Revision 1 bessi pj nustuhandb k er a eins f anleg ensku Ef ad bj nustuveitandi vidskiptamanns arfnast annas tungum ls en ensku er pad skylda vidskiptamanns a skaffa tungum lapj nustu Reyni ekki a afgrei a t ki nema a essi j nustuhandb k hefur veri sko u og skilin Brot sinna essari a v run getur leitt til mei sla j nustuveitanda stj rnanda e a sj klings fra raflosti v lr nu eda rum aheettum Il presente manuale di manutenzione disponibile soltanto in lingua inglese Se un addetto alla manutenzione richiede il manuale in una lingua diversa il cliente tenuto a prov
76. _RIRP versusThe first frame Sent if positioner motion is dynamic DS Increment vector of ISO_y_versus_RIRP versus The first frame Sent if positioner motion is dynamic ISO x versus RIRP incr 0019 xx7D ISO y versus RIRP incr 0019 xx7E ISO z versus RIRP incr 0019 xx7F Gantry Trajectory Vector 0019 xx6D Increment vector of ISO_z_versus_RIRP versus The first frame Sent if positioner motion is dynamic Type of positioner trajectory of each frame S SWIVEL P PANNING B BACKOUT O PARKING OUT U UNKNOWN Review mode in which the SUB lut mod ule is applicable Defined terms re NONE NAT SUB and BOTH applicable review mode 0019 xx9D log lut control points 0019 xx9E N Control points of the log LUT exp lut SUB control points 0019 xx9F N Control points of the exp LUT for SUB re view ABD value 0019 xxA0 DS 1 Average gray level value of the histo gram Single value that represents the average of all the frames sub window center 0019 xxA1 DS 1 window center applicable when the SUB lut module is applied sub window width 0019 xxA2 DS 1 window width applicable when the SUB lut module is applied exp lut NOSUB control points 0019 xxAD DS 1 N Control points of the exp LUT for NOSUB review ABD Vector 0019 xxB9 FL 1 N Average gray level value of the histo gram Multi values that contains the val ue of each single frame spectral filter thickness 0019 xxC4 IS 1 Thickness of
77. a IGS 330 Conformance Statement of DICOM Direction 5537565 1 8EN Revision 1 6 Standard Extended and Private Data Attributes The Product supports the Standard and Private Attributes defined in the following sections in Standard Extended MPPS Instances as Type 3 data elements 6 1 Standard Attributes The Product supports the following attributes not specified in the MPPS IOD in SOP Instances as Type 3 data elements Table 8 7 Standard Extended Attributes Exposure Dose Sequence 0040 030E Exposure Dose Sequence will contain Total Number of Exposures 0040 0301 items plus an item for each flu oroscopy episode not already counted as an exposure gt Radiation Mode 0018 115A Specifies X Ray radiation mode Enumerated Values e CONTINUOUS PULSED gt KVp 0018 0060 Peak kilo voltage output of the x ray generator used An average in the case of fluoroscopy continuous radia tion mode gt X Ray Tube Current in HA 0018 8151 X Ray Tube Current in pA An average in the case of fluoroscopy continuous radiation mode 0018 1150 Time of x ray exposure or fluoroscopy in msec gt Type of Filters 0018 1161 Type of filter s inserted into the X Ray beam e g wedges gt Filter Material 0018 7050 If filter used value MIXED 6 2 Private Group GEMS_DL_STUDY_01 118 Private Group GEMS_DL_STUDY_01 is modeled as part of the Performed Procedure Step Information Entity Table 8 8 Private Group GE
78. a IGS 330 Conformance Statement of DICOM Direction 5537565 1 8EN Revision 1 e the Optima Application Entity to close the association e the possibility for the user to add a new item to the local database While the query is in progress it is possible to cancel it by pressing a button on the patient browser This will cause a C FIND cancel to be sent 3 3 3 2 Proposed Presentation Context Table 40 Presentation Context Table Proposed Abstract Syntax Transfer Syntax SEET Nme Im mem UID List Nace Modality Work 1 2 840 10008 5 1 4 31 Implicit VR Little Endian 1 2 840 10008 1 2 SCU None list Information Model FIND SOP Specific DICOM Conformance Statement for the Modality Worklist Information Model FIND SOP Class Following are the status codes that are more specifically processed when receiving messages from a Modality Worklist SCP equipment Service Status Status Codes Further Meaning Application Behavior When re Related Fields Processed ceiving Status Codes if received Refused Out of resources A message is displayed with text 0000 0902 Last query failed more detailed information is logged in the error log SOP Class not Supported A message is displayed with text 0000 0902 Last query failed more detailed information is logged in the error log Failed Identifier does not match SOP Class A message is displayed 0000 0901 0000 0902 class with text Last query failed mor
79. a proposes only a single Transfer Syntax in each Presentation Context i e for each Abstract Syntax in the following Presentation Context Tables the AE proposes one Presentation Context for each specified Transfer Syntax 3 3 1 Real World Activity Copy Images and or Dose SR s 3 3 1 1 Associated Real World Activity The operator must select a destination in the User Interface towards which the images Dose SR s will be transferred For Images one of the two following scenarios is possible 1 The operator selects data to be sent to the destination through the User Interface Once these selections are done the user clicks on the Network button to initiate a Copy images operation The Optima DICOM AE will then initiate a DICOM association with the selected destination and transfer the selected images on this association 2 If system is configured for autoarchive the Optima DICOM AE will automatically initiate a DICOM association with the selected destination to transfer any new image created on the system For Dose SR s one of the two following scenarios is possible 1 The operator selects data to be sent to the destination through the User Interface Once these selections are done Optima DICOM AE will automatically initiate a DICOM association with the selected destination to transfer the Dose SR s at every termination of an exam 2 The user can manually initiate to transfer Dose SR to selected destination through the
80. ach frame mAs actual vector 0019 xxBO DS 1 N Exposure conditions mAs This is a multi valued attribute that contains the mAs for each frame Acquisition Mode Description 0019 xxB1 LO 1 The precise description of the numerical code Adx acq mode May be used by the one touch protocol editor in AW no units Acquisition Mode Display Label 0019 xxB2 LO 1 Label that shall be displayed on the AW browser for each sequence no units Acquisition Protocol User Name 0019 xxB3 LO 1 Protocol name as it was entered by the user during protocol edit no units Acquisition Region 0019 xxBA CS 1 Coded String to determine whether the acquisition is Cardiac or Angio Defined terms are CARDIAC ANGIO and UN KNOWN Chapter 4 X Ray Angiography XA Information Object 75 Implementation 76 Optima IGS 320 Optima IGS 330 Conformance Statement of DICOM Direction 5537565 1 8EN Revision 1 Acquisition SUB mode 0019 xxBB 0019 xxC2 0019 xxC5 i 0019 xxD4 mR mAs calibration value 0019 xxD5 DRM LUT file name 0019 xxDC DRM Strength 0019 xxDD table rotation status vector 0019 xxBD pw actual vector preselected pivot rotation speed detection gain value table rotation angle increment Table X Position to Isocenter increment 0019 xxD7 0019 xxD8 0019 xxD9 Table Y Position to Isocenter increment Table Z Position to Isocenter increment Coded String to determine whether the acquisit
81. ame Module Name Reference X Ray Acquisition Used Section 4 5 10 X Ray Acquisition Module X Ray Collimator Used Section 4 5 11 X Ray Collimator Module X Ray Table Used Section 4 5 12 X Ray Table Required if image is created Module with table motion May be present otherwise XA Positioner Used Section 4 5 13 XA Positioner Module DX Detector Section 4 5 14 DX Detector Mod ule ETE mm Im ang JI mme Im SOP Common Used Section 4 5 16 SOP Common Module N A N A N A 3 OD Module Table Optima IGS 320 Optima IGS 330 Conformance Statement of DICOM Direction 5537565 1 8EN Revision 1 4 Information Module Definitions Please refer to DICOM Part 3 Information Object Definitions for a description of each of the entities modules and attributes contained within the X Ray Angiographic Information Object The following modules are included to convey Enumerated Values Defined Terms and Optional Attributes supported Type 1 amp Type 2 Attributes are also included for completeness and to define what values they may take It should be noted that they are the same ones as defined in the DICOM Standard Part 3 Information Object Definitions Also note that Attributes not present in tables are not supported 4 1 Patient Entity Modules Patient Module Table 4 3 Patient Module Attributes Attribute Name Attribute Description Patiente Name 0010 0010 From user interface or worklist When from user interface value contains onl
82. atement of DICOM Direction 5537565 1 8EN Revision 1 NL Rel with Pa VT Concept Name VM Req Condition Value Set Constraint rent Type 14 gt CONTAINS CODE EV 113854 DCM 1 N M Value 113856 DCM Source of Dose Informa Automated Data Collec tion tion 6 1 2 TID 10002 Accumulated X Ray Dose Type Extensible Table 9 14 NL Rel with Pa VT Concept Name VM Req Condition Value Set Constraint rent Type 1 CONTAINER EV 113702 DCM Accu 1 M mulated X Ray Dose Da ta 2 HAS CON CODE EV 113764 DOM Ac 1 M Plane EV 113622 CEPT MOD quisition Plane DCM Single Plane 3 CONTAINS CONTAINER EV 122505 DOM Cali 1 N MC IEF Calibra Sent if mRmAs calibration bration tion Data is date and Calibration re available sponsible Party value is available 4 gt gt HAS CON CODE EV 113794 DCM Dose 1 M Value A 2C090 SRT CEPT MOD Measurement Device Dosimeter 5 gt gt CONTAINS DATETIME EV 113723 DOM Cali 1 M mRmAs Calibration date of bration Date that plane gt gt CONTAINS NUM EV 122322 DCM Cali 1 M Value 1 0 Units EV bration Factor 1 UCUM no units 7 CONTAINS NUM EV 113763 DCM Cali 1 M Value 35 Units EV bration Uncertainty UCUM Percent gt gt CONTAINS TEXT EV 113724 DCM Cali Value Calibration Re bration Responsible Par sponsible Party defined in ty the system gt CONTAINS INCLU
83. atient ID From Worklist A sequence of identification numbers or co des used to identify the patient If present shall contain one or more items 2 2 2 2 3 3 3 3 1 3 3 Issuer of Patient ID Qualifi 0010 0024 From Worklist Attributes specifying or qualifying the identity ers Sequence of the issuer of the Patient ID or scoping the Patient ID On ly a single Item shall be permitted in this sequence C 1 1 Chapter 4 X Ray Angiography XA Information Object 57 Implementation Optima IGS 320 Optima IGS 330 Conformance Statement of DICOM Direction 5537565 1 8EN Revision 1 Attribute Name Attribute Description 1 gt Type of Patient ID 0010 0022 From Worklist The type of identifier in this item Defined Terms TEXT RFID BARCODE 4 2 Study Entity Modules 4 2 1 General Study Module Table 4 4 General Study Module Attributes Attribute Name Tag Attribute Description Study Instance UID 0020 000D 1 From Worklist Otherwise Internally generated as follows registered prefix for GEMS 2 Registered prefix within GEMS a b c encoded mac address of the DL host x y z unique id protected against reinstallation and re en trance Study Description 0008 1030 Generated description from the worklist entries If no value found value is taken from user interface Study Date 0008 0020 Study Time 0008 0030 Referring Physician s Name 0008 0090 Name of Physician s Read 0008 1060 From
84. ble uniquement en anglais FR e Si le technicien d un client a besoin de ce manuel dans une langue autre que l an glais il incombe au client de le faire traduire e Ne pas tenter d intervenir sur les quipements tant que ce manuel d installation et de maintenance n a pas t consult et compris e Le non respect de cet avertissement peut entra ner chez le technicien l op rateur ou le patient des blessures dues des dangers lectriques m caniques ou autres WARNUNG Diese Serviceanleitung existiert nur in englischer Sprache DE e alls ein fremder Kundendienst eine andere Sprache ben tigt ist es Aufgabe des Kunden f r eine entsprechende Ubersetzung zu sorgen e Versuchen Sie nicht diese Anlage zu warten ohne diese Serviceanleitung gelesen und verstanden zu haben e Wird diese Warnung nicht beachtet so kann es zu Verletzungen des Kundendienst technikers des Bedieners oder des Patienten durch Stromschl ge mechanische oder sonstige Gefahren kommen NPOEIAONOIHZH To Trapov eyxelpidio o pBig S1ATIBETOI HOVO ora ayyAIK EL e Edvo TEXVIKOG O DBIG EVOG TTEAATN OTTOITEI TO TTODOV YXEIDISIO GE VYAWOOO EKTOG TWV ayyAlikuwv OTTOTEAEI UBUVN TOU TTEAGTN VO TTOD XEI TIG UTTNPEGIES HETA POAONG e Mny ETTIXKEIDAOETE Tnv EKT AEON epyaciwv O PBIG oTov EEOTTMOMO av Dev EXETE CUMBOUAEUTEI KAI karavorjozi TO rrap v EYXEIPIOIO o pic e Av BEVTTDOO SETE THV TTDOEISOTTOINON OUT EVOEXETAI VO TTDOKANBEI TPOAUHOTIOHOG OTOV TE
85. cci n Radiol gica y normas nacionales ACHTUNG R NTGENAPPARATE SIND EINE GEFAHR F R PATIENTEN SOWIE BEDIENUNGSPERSONAL WENN DIE GELTENDEN SICHERHEITSVORKEHRUNGEN NICHT GENAU BEACHTET WERDEN Dieser Apparat entspricht in seiner Bauweise strengsten elektrischen und mechanischen Sichereitsnormen doch in den H nden unbefugter oder unqualifizierter Personen wird er zu einer Gefahrenquelle Uberm Rige R ntgenbestrahlung ist f r den menschlichen Organismus sch dlich Deswegen sind hinreichende Vorsichtsmafsnahmen erforderlich um zu verhindern daf unbefugte oder unqualifizierte Personen solche Ger te bedienen oder sich selbst und andere Personen deren Bestrahlung aussetzen k nnen Vor Inbetriebnahme dieses Apparats sollte sich das qualifizierte und befugte Bedienungspersonal mit den geltenden Kriterien f r den gefahrlosen Strahleneinsatz durch sorgf ltiges Studium des Hefts Nr 26 der Internationalen Kommission f r Strahlenschutz ICRP vertraut machen Empfehlungen der Internationalen Kommission f r Strahlenschutz und anderer nationaler Normenbeh rden Optima IGS 320 Optima IGS 330 Conformance Statement of DICOM Direction 5537565 1 8EN Revision 1 Important Information LANGUAGE DIPEHVIIPEXHEHME Tosa yrrerBaHe 3a pa6ora e HATMHHO camo Ha aHrTIM CKA 3VK BG e AKO HOCTaBUMKPT Ha ycnyrata Ha KNVeHTa M3VCKa Apyr e3VK 3anmbrbxeuue Ha KnieHTa e na ocurypu npeBon e He u3non3Baiite o6opynBaHero npegn na cre ce koHcyrirupanu n pas6pan
86. ces used over an Association as negotiated between Application Entities includes Abstract Syntaxes and Transfer Syntaxes Protocol Data Unit PDU A packet piece of a DICOM message sent across the network Devices must specify the maximum size packet they can receive for DICOM messages Security Profile A set of mechanisms such as encryption user authentication or digital signatures used by an Application Entity to ensure confidentiality integrity and or availability of exchanged DICOM data Service Class Provider SCP Role of an Application Entity that provides a DICOM network service typically a server that performs operations requested by another Application Entity Service Class User Examples Picture Archiving and Communication System image storage SCP and image query retrieve SCP Radiology Information System modality worklist SCP Chapter 2 Introduction 27 Optima IGS 320 Optima IGS 330 Conformance Statement of DICOM Direction 5537565 1 8EN Revision 1 Service Class User SCU Role of an Application Entity that uses a DICOM network service typically a client Examples imaging modality image storage SCU and modality worklist SCU imaging workstation image query retrieve SCU Service Object Pair SOP Class The specification of the network or media transfer service of a particular type of data object the fundamental unit of DICOM interoperability specification Examples Ultrasound Image Storage Ser
87. cit VR Big Endian 1 2 840 10008 1 2 1 2 SOP Specific Conformance Statement for Verification SOP Class Optima DICOM Application provides standard conformance to the DICOM Verification Service Class NOTE Optima AE will time out 60 secs after Association Acknowledgment is sent and no Verification request is received This time out is not configurable 3 4 3 Real World Activity Request Storage Commitment 3 4 3 1 Associated Real World Activity The AE will accept a configurable number of DICOM associations to receive the storage commitment responses The number of accepted associations can be configured from 1 to 5 3 4 3 2 Accepted Presentation Context Table Presentation Context Table Proposed Abstract Syntax Transfer Syntax E Storage Com 1 2 840 10008 1 20 1 Implicit VR Little Endian 1 2 840 10008 1 2 SCU Role Selec mitment Push tion Nego Model tiation Storage Com 1 2 840 10008 1 20 1 Explicit VR Little Endian 1 2 840 10008 1 2 1 SCU Role Selec mitment Push tion Nego Model tiation Storage Com 1 2 840 10008 1 20 1 Implicit VR Big Endian 1 2 840 10008 1 2 2 SCU Role Selec mitment Push tion Nego Model tiation SOP Specific DICOM Conformance Statement for the Storage Commitment Push Model SOP Class SCU The Optima accept the SCU role which must be proposed via SCP SCU Role Selection Negotiation within a Presentation Context for the Storage Commitment Push Model SOP Class Upon receiving a Storage Commitment N
88. d Private attributes Standard Extended and Private attributes are described in Section Standard Extended and Private Data Attributes Table 4 2 X Ray Angiographic Image IOD Modules ules Clinical Trial Subject Not Used Study General Study Used Section 4 2 1 General Study Module Clinical Trial Study Not Used ONA Frame of Reference Synchronization Not Used Equipment General Equipment Used Section 4 4 Equipment Entity Modules Frame of Reference Synchronization Not Used NA General Image Used Section 4 5 1 General Image Module Image Pixel Section 4 5 2 Image Pixel Mod ule Contrast Bolus Used Section 4 5 3 Contrast Bolus Required if contrast media Module was used in this image Cine Used Section 4 5 4 Cine Module Required if pixel data is Multi Frame Cine data Multi Frame Used Section 4 5 5 Multi Frame Mod Required if pixel data is Multi ule Frame Cine data Frame Pointers Used Section 4 5 6 Frame Pointers Module Mask Used Section 4 5 7 Mask Module Required if the Image may be subtracted Display Shutter Used Section 4 5 8 Display Shutter Module Section 4 5 9 X Ray Image Mod ule Chapter 4 X Ray Angiography XA Information Object 55 Implementation Patient Study Section 4 2 2 Patient Study Mod ule didi T E E ge ules A N A Clinical Trial Series Not Used N A 56 Optima IGS 320 Optima IGS 330 Conformance Statement of DICOM Direction 5537565 1 8EN Revision 1 Entity N
89. d of this image Patient head to end Patient head to end position 00195971 sam FR 1 Tabletop to patient head distance in om to patient head distance in cm Calibration sw version 0019 xx8F String containing algorithm generation algorithm version and algorithm release A new release does not change the algo rithm only change code structure I O code optimization no units Image detector rotation angle 0019 xx92 Image rotation at the detector reading in degrees before image flip image flip 0019 xx95 Horizontal and vertical image sweep per formed by the acquisition system before sending the DICOM image Defined terms are YES and NO Can downscan 512 0019 xxAA Indicates the possibility to downscan the pixel data to 512x512 for exchange pur poses Enumerated values YES NO Table rotation angle 0019 xxEA Rotation of the table in the horizontal plane in degrees Zero is defined when the head feet axis of the table is aligned with the CRA CAU axis of the Isocenter Z Positive angles are clockwise when looking at the table from upwards The valid range is from 180 to 180 Con tains the value of the first frame Table X Position to Isocenter 0019 xxEB X position of the Table Reference Point with respect to the Isocenter mm Posi tive values are towards the LAO direction of the Isocenter The value of this attrib ute applies to the first frame of the Multi frame image Chapter 4 X Ray Angio
90. data reguest Initiate a DICOM Association to send the request Wait for worklist response s Access to the local database to add new patient exam demographic data Close the association Verification Initiate a DICOM Association Send the C ECHO request Wait for the C ECHO response Close the Association Provide MPPS Information 2 Implementation Model O O Optima IGS 320 Optima IGS 330 Conformance Statement of DICOM Direction 5537565 1 8EN Revision 1 User selects one MWL entry scheduled case OR User selects no MWL entry and manually creates a patient un scheduled case and starts the exam At the start of an exam build a MPPS N CREATE DICOM message Initiate a DICOM association to send the N CREATE request Wait for the response Close the Association At the termination of the exam build a MPPS N SET DICOM message mentioning the status as COMPLETED or DISCONTINUED Initiate a DICOM association to send the N SET request Wait for the response Close the Association The Optima DICOM Application Entity also serves a default SCP function the Verification Service Class independently from others SCU functions 2 3 Sequencing of Real World Activities Not Applicable Chapter 3 Network Conformance Statement 35 Optima IGS 320 Optima IGS 330 Conformance Statement of DICOM Direction 5537565 1 8EN Revision 1 3 AE Specifications 3 1 Optima AE Specification The Optima Application Ent
91. e 0008 1010 in Gen eral Equipment Module Defaults to value of Manu facturer 0008 0070 in General Equipment Mod Defaults to value of Manu facturer s Model Name 0008 1090 in General Equipment Module Defaults to value of Device Serial Number 0018 1000 in General Equipment Module 1 M Defaults to value of imple mentation 6 Standard Standard Extended and Private Templates 2015 General Electric Company All Rights Reserved General Electric Company No 1 Yong Chang North Road Economic and Technological Development Zone 100176 Beijing P R CHINA www gehealthcare com
92. e detailed information is logged in the error log Unable to process A message is displayed with text 0000 0901 0000 0902 Last query failed more detailed information is logged in the error log Cancel FEOO Matching terminated due to can A message is displayed with text None cel Canceled Success 0000 Matching is complete No final Worklist matches are displayed None identifier is supplied Pending Matches are continuing Cur None None rent Match is supplied and any Optional Keys were supported in the same manner as Required Keys Matches are continuing Warn None None ing that one or more Optional Keys were not supported for ex istence for this Identifier 3 AE Specifications Optima IGS 320 Optima IGS 330 Conformance Statement of DICOM Direction 5537565 1 8EN Revision 1 Service Status Status Codes Further Meaning Application Behavior When re Related Fields Processed ceiving Status Codes if received 5 Any other status code A message is displayed with text None Last query failed more detailed information is logged in the error log NOTE The default timeout to receive the C FIND response is 30 secs and is not configurable 3 8 4 Real World Activity Request Storage Commitment 3 3 4 1 Associated Real World Activity The operator may configure the image storage destination host and or Dose SR storage destination host to have an associated Storage Commitment SCP AE
93. e 21 1 Conformance Statement OVervlieW s 2c Es ees seges hice da dee dong patentee Erbe Ro SE EEN ee 21 Chapter 2 INTRODUCTION coincid an 23 EG ige te de EER D MOE N OE p 23 EI e EE 23 TZ QUOD RE N EE RE OR EE N 23 1 3 Overall Dicom Conformance Statement Document Gtruchure esse ee ee ee 23 TA ve te D RO EE 25 1 5 Scope and Field Application ee Hee 25 1 6 Important Remarks Es tet ee tm Ge ead e eA a aii wean 25 Ii caus m RE AE EA 26 18 DEDOS OE edu e i ibunt dus dede OE EE NE OR Ee 26 er ee 28 Chapter 3 NETWORK CONFORMANCE STATEMENT ENEE 31 P introduction s ail ore ter tat ir dete ae OE EO a OE ME AE OE noc 31 2 Implementation Model RE ORR irren RE OE N EE OE 32 2 1 Application Data Flow Diagramm 32 2 2 Functional Definition Of AE S ni e e KERR GEE xa ESL SEE Ee han Abe Se en Ee ee ER ES 33 2 3 Sequencing of Real World Achvittes AAA 35 3 AE SpeciflCallOns icit e Ree Y AE 36 3 1 Optima AE Specification oer ect teret DE SEE RE Ee gebe eo dee pee a EVE rage retia Er edu prag ee geh 36 3 2 Association Establishment Policies ERGE RE ER GEE RR ee Reed EE nennen ndi nnn 36 3 2 MEEL il Mp OE ER EER HI ORR OR AO OR OE RIG 36 3 2 2 Number EE EEN 36 4 2 9 Asynichronous Nature EE 36 3 2 4 Implementation Identifying InformatiON esse ee eter Re ee ee ee ee ee ee ee 36 3 3 Association Initiation Policy aene RR AE dd 37 3 3 1 Real World Activity Copy Images and or Dose Ge 37 Tab
94. e 6 7 Patient Identification Module Attributes Attribute Name Tag Expected Expected Re Mapped into Matching Key turned Key the Image Type Type MPPS Patient s Name 0010 0010 1 Yes Yes Matching is supported user entered value is sent Wild cards are appended in the query at the end of the com ponents first name and last name The first person name component group returned is mapped in the image No trun cation is performed Values may be truncated for display only Patient ID 0010 0020 Yes Yes Matching is supported user entered value is sent Other Patient D Patient ID OtherPatieniD 0010 1000 1000 YesNo Yes No Requested zero length Requested zero length length Issuer of Patient ID of Patient ID issuer of Patient ID 0010 0021 0010 0021 YesYes Yes Yes Requested zero length Requested zero length length Issuer of Patient ID Qualifiers 0010 0024 Yes Yes Requested zero length Sequence gt Universal Entity ID 0040 0032 o 3 veses Requested zero length Chapter 6 Modality Worklist Information Model 105 Definition Optima IGS 320 Optima IGS 330 Conformance Statement of DICOM Direction 5537565 1 8EN Revision 1 Matching Key turned Key the Image Type Type MPPS 87 Ee arer pam osseo uocum 7 Cp on 9 EEN o eat Jee o 9 59 7 Ee 7 He EE gt Identifier Type Code 0040 0035 NOTE in the Expected
95. e TEE 68 5 Standard Extended and Private Data Attrbutes esse esse ee ee ee ee Re ee ee ee ee RR be ee ee ee ee ee ee ee ee ee ee 69 5 1 Standard Attributes rec aii 69 5 2 Private Group DLX SERIE OI 69 5 3 Private Group GEMS XRADCAL 0 71 5 4 Private Group GEMS DL IMG OD 72 5 5 Private Group GEMS DL STUDY Oil 79 5 6 Private Group GEMS DL SERIES OI 80 5 7 Private Group GEMS DL IMG OD 80 Chapter 5 SC INFORMATION OBJECT IMPLEMENTATION sesse sees ee ee see ee ee ee ee ee ee ee ee ee ge ee ee 81 Ma A OE Oe OE EO EN 81 2 Optima Mapping of DICOM Enttes cee eek ee ke ee ke ee ke ee ke ee Re RA ee Re Re ede ee ee ee ee ee ee ee ee ee ee ee ee ee ee 82 3 IOD e IER 83 4 Information Module DefinitiOnS i ies se cecinere nennen itn nannten inne uu dee ek ee 84 4 1 Patient Entity Modules id oie tie A AA eA a sg 84 A 2 Study Ent Modules oieri ER tiles epe ncaa a cates Bich dite ollas lene ee 85 42 1 General Study Module sis beves DE ra perpe the Skye sora bv ERE Ceca imaged ancora 85 4 22 Patient Study Module EER Re SEER a c que EN ee EE SEGE SEE ee I dn ee OER EER Ge aga 85 EEU Entity Modules sicat Aet iet t Tb es OE OR 86 4 4 Equipment Entity Modules uses se ee RR RR RR Ee Re Re RR ee Re AR Ee AR ed ee nenne enirn ni Red iren Re AA 87 4 4 1 General Equipment Module 87 4 4 2 SC Equipment Module 88 4 5 Image Entity Modules ii RE RE toe Re N ee ee 88 4 5 1 General Image Module ss iss EE i Be RE I GE DE Ge Ese ED ES Se 88 4
96. ed Attributes calibration image 0050 0004 NO ENE NET KVP 0018 0060 Peak kilo voltage output of the Xray gener ator used Table Angle 0018 1138 Angle of the head feet axis of the table in degrees relative to the horizontal plane Zero is defined when the head feet axis is in the horizontal plane Positive values are when the head of the table is upwards the horizontal plane The valid range is from 45 to 45 Contains the maximum value of all the frames of the multi frame image Distance Source to Patient 0018 1111 Internally generated by the acquisition sys tem Distance Source to Detector 0018 1110 Internally generated by the acquisition sys tem Positioner Motion 0018 1500 DYNAMIC if Pivot moves or C ARM moves or L arm moves or Tilt varies or Ta ble rotation or ISO movement happens If NO motion in Pivot or C arm or Tilt or Ta ble rotation then it will be sent as STATIC Positioner Secondary Angle 0018 1511 Position of the Xray Image Intensifier about the patient from the CAU to CRA di rection where movement from CAU to ver tical is positive For multi frame images value of the first frame Note The values correspond to the mo tions in Pivot C L arm Rotation Tilt Pa tient Position field of view dimension s 0018 1149 From user selection in the User Interface of the acquisition system Possible values are 4001400 OR 3201320 OR 3001300 OR 2001200 OR 1721172 OR
97. ee ee Gee ee ee 45 3 4 3 2 Accepted Presentation Context Table 45 eel Pele veld Profiles ee do RE EE EE EE ME Ert ta ET OG 47 4 1 Supported Communication Stacks PS 3 8 sese AE ee ek dene 47 ae oie ME RE EE dees 47 4 3 SCRIP SIacke tct tee Beek sag Ged A Qu Lo e t etu A En 47 29 1 AP AE N ME EA p oom N OE EN DEE BEE 47 4 3 2 Physical CE sesse Es Ee Ee EER ee ee ee ee ee ee ee ee ee nennen nenne 47 4 4 Additional Protocol Support Hee 47 4 5 IPV4 and IPv6 Support AT 5 Extensions Specializations PDrivattzations ee ee ee ee ee ee ee ee ee Hm 48 14 Table of Contents Optima IGS 320 Optima IGS 330 Conformance Statement of DICOM Direction 5537565 1 8EN Revision 1 5 1 Standard Extended SOP Class65 eet Se EER ERK Ee Ee Re ike a SWEER gade 48 6 Com UPS Ota SAGE SE toe Eu caes te ste Led e arie oa NE p the ade N aad 49 6 1 AE Title Presentation Address Mappimg ees ee ee ee ee ee ee ee ee ee ee 49 6 2 Configurable Parameters ono Ecce gede Bed se seek AGS e ek Ee de dune eene sa vee de ee dus 49 7 Support of Extended Character Ges ee ee ee ee ee ee ee 52 Chapter 4 X RAY ANGIOGRAPHY XA INFORMATION OBJECT IMPLEMENTATION 53 Meel ede sigh siesta at cha EET 53 2 Optima Mapping of DICOM Enttes iese sesse ee eek ee ke ee ke ee Re ee ke ee Re AA ee Re AA ee ee ee ee ee ee Re ee ee ee ee ee ee ee ee ee 54 S OD Module TABS A A A A E A E 55 ue lee Beie EIER a EE 57 4 1 Patient Entity Modules sis Ee e
98. el size Units EV m2 UCUM m CONTAINS CONTAINER EV 113771 DCM X Ray 1 N U Type of filter s inserted Filters into the X Ray beam For cardiac setup there is maximum of 1 filter For angio setup there can be maximum 3 filters 24 Es NTAINS CODE EV 113772 DCM X Ray 1 U 113651 DCM Wedge Filter Type filter 25 CODE EV 113757 DCM X Ray 1 U C 127F9 SRT Copper Filter Material or Copper compound 26 Ed NTAINS NUM EV 113758 DCM X Ray 1 U Units EV mm UCUM Filter Thickness Minimum mm id NUM EV 113773 DCM X Ray 1 U Units EV mm UCUM Filter Thickness Maxi mm Value 2 mum 28 Ed NTAINS CODE EV 113732 DCM Fluoro Used 113631 DCM Pulsed Mode 29 Eu NUM EV 113791 DCM Pulse Used Units EV pulse s Rate UCUM pulse s dd o CONTAINS NUM EV 113768 DCM Num ber of Pulses gt gt HASCON CODE EV 121401 DCM Der 1 CEPT MOD vation si CONTAINS EV 113733 DCM KVP CONTAINS NUM EV 113734 DCM X Ray Tube Current ened NUM EV 113735 DCM Expo sure Time NUM EV 113793 DCM Pulse Width Chapter 9 X ray Radiation Dose Structured Report Information Object Implementation Used Units EV 1 UCUM no units IFF count of Not Used pulses in Row 28 is estimated Contains only one item Units EV kV UCUM Contains only one item Units EV
99. ent Module for N Event Report Storage Media File Set UID Media File Set UID 08010 0140 Not used ELI UU D SOP Sequence E 1199 The AE considers the SOP Instances ref erenced by this sequence as successfully archived ETE AC HEN ETE A SCS Chapter 7 Storage Commitment Push Model 107 Implementation 108 Optima IGS 320 Optima IGS 330 Conformance Statement of DICOM Direction 5537565 1 8EN Revision 1 Failed SOP Sequence 0008 1198 The AE considers the SOP Instances ref erenced by this sequence as not archived the application will display an error status in the network queue gt Referenced SOP Class UID 0008 1150 N gt Referenced SOP Instance UID 0008 1155 N 0008 1197 See Table 7 3 for the range of possible values Processing of Failure Reason when received in a N Event Report When receiving a N Event Report request with a Event Type ID equal to 2 meaning that Storage Commitment is complete but failure exists following is the set of value that this Storage Commitment SCU AE is able to process Table 7 3 Storage Commitment Module for N Event Report A A Reason Code DI COC IAE 1 Storage Commitment Push Model Implementation Optima IGS 320 Optima IGS 330 Conformance Statement of DICOM Direction 5537565 1 8EN Revision 1 Chapter 8 Modality Performed Procedure Step Implementation 1 Introduction This section specifies the use of the DICOM Modality Performed Procedure Step infor
100. er interface From User Interface restricted to 64 characters From Worklist The sequence may have zero or more Items From Worklist Required if a Sequence item is present From Worklist Required if a Sequence item is present Attribute Description Value SR Modalit 0008 0060 y 124 4 Information Module Definitions Optima IGS 320 Optima IGS 330 Conformance Statement of DICOM Direction 5537565 1 8EN Revision 1 Series Instance UID 0020 000E Protocol Name 0018 1030 Series Description 0008 103E Referenced Performed Proce 0008 1111 dure Step Sequence gt Referenced SOP Class UID 0008 1150 gt Referenced SOP instance 0008 1155 UID 4 3 Equipment Entity Modules General Equipment Module Table 9 5 General Equipment Module Attributes Nu HN ci iei ME Attribute Name g Institution Name 0008 0080 Institution Address 0008 0081 1000 Station Name 0008 1010 Manufacturer s Model Name 0008 1090 Device Serial Number 0018 1000 Software Versions 0018 1020 4 4 Document Entity Modules 4 4 1 SR Document General Module Ta 0008 Unique identifier of the SR Ser ies Starts from 990 Date the Series started Time the Series started Decription of the contents un der which series was per formed Value RADIATION DOSE INFORMATION Identifies the Performed Proce dure Step SOP Instance in which the Series is created Identical to t
101. f each of the query key attributes contained within the Modality Worklist Information Model 3 1 Common Scheduled Procedure Step Entity Modules 3 1 1 SOP Common Module Table 6 2 SOP Common Module Attributes Attribute Name Tag Expected Expected Re Mapped into Matching Key turned Key the Image Type Type MPPS Specific Character Set 0008 0005 1C No No Matching on this tag is not supported ISO IR 100 or ISO IR 6 is only accepted The default value if either not present or sent as EMPTY shall be considered as ISO IR 6 Multi valued character set is supported provided the first character set value is either EMPTY or ISO 2022 IR 6 or ISO 2022 IR 100 3 1 2 Scheduled Procedure Step Module Table 6 3 Scheduled Procedure Step Module Attributes Attribute Name Tag Expected Expected Re Mapped into Matching Key turned Key the Image Type Type MPPS Scheduled Procedure Step 0040 0100 1 No No Sequence gt Scheduled Station AE Title 0040 0001 1 No No Matching is supported The matching value is the AE Ti tle of the Optima system gt Scheduled Procedure Step 0040 0002 1 No No Matching value can be config Start Date ured for date or date range gt Scheduled Procedure ELS 0040 0003 No No Requested zero length ELS Time gt Modality 0008 0060 No No Matching is supported This is requested either as zero length or as XA user configu rable gt Scheduled Performing Physi 0040 0006 No No Requested zero le
102. f danger in the hands of the unauthorized or unqualified operator Excessive exposure to x radiation causes damage to human tissue Therefore adequate precautions must be taken to prevent unauthorized or unqualified persons from operating this equipment or exposing themselves or others to its radiation Before operation persons qualified and authorized to operate this equipment should be familiar with the Recommendations of the International Commission on Radiological Protection contained in Annals Number 26 of the ICRP and with applicable national standards ATENCION LOS APARATOS DE RAYOS X SON PELIGROSOS PARA EL PACIENTE Y EL MANIPULADOR CUANDO LAS NORMAS DE PROTECCION NO ESTAN OBSERVADAS Aunque este aparato est construido seg n las normas de seguridad m s estrictas la radiaci n X constituye un peligro al ser manipulado por personas no autorizadas o incompetentes Una exposici n excesiva a la radiaci n X puede causar dafos al organismo Por consiguiente se deber n tomar todas las precauciones necesarias para evitar que las personas incompetentes o no autorizadas utilicen este aparato lo que ser a un peligro para los dem s y para s mismas Antes de efectuar las manipulaciones las personas habilitadas y competentes en el uso de este aparato deber n informarse sobre las normas de protecci n fijadas por la Comisi n Internacional de la Protecci n Radiol gica Anales No 26 Recomendaci nes de la Comisi n Internacional sobre la Prote
103. f the system Restricted to 1024 characters Station Name 0008 1010 3 AE title of the system that created the DI COM image Device Serial Number 0018 1000 3 Manufacturer s serial number of the equip ment From internal configuration of the ma chine Software Versions Versions 0018 1020 3 DL application version DL DL application version version ESI NEN ID 0018 1008 px Identifier of the gantry or positioner Value LC Chapter 5 SC Information Object Implementation 87 Optima IGS 320 Optima IGS 330 Conformance Statement of DICOM Direction 5537565 1 8EN Revision 1 4 4 2 SC Equipment Module Table 5 8 SC Equipment Module Attributes Attribute Name Tag Conversion Type sc manufacturer 0018 1016 GE MEDICAL SYSTEMS sc manufacturer model name 4 5 Image Entity Modules 4 5 1 General Image Module Table 5 9 General Image Module Attributes Attribute Name Tag Attribute Description Instance Number 0020 0013 Internally generated starting at 1 0020 0020 Patient direction of the rows and columns of the image This attribute contains the values corresponding to the first frame Patient Orientation Content Date Content Time Image Type Acquisition Date Acquisition Time Source Image Sequence gt referenced frame number gt referenced sop class uid gt referenced sop instance uid Image Comments Burned In Annotation Derivation Description 4 5 2 Image Pixel M
104. for the implementation of a X Ray Angiography Information Object Chapter 5 Secondary capture Information Object Implementation which specifies the GEMS equipment compliance to DICOM requirements for the implementation of a Secondary capture Information Object Chapter 6 Modality Worklist Information Model which specifies the GEMS equipment compliance to DICOM requirements for the implementation of the Modality Worklist service Chapter 7 Storage Commitment Information Model Implementation which specifies the GEMS equipment compliance to DICOM requirements for the implementation of the Storage Commitment service Chapter 8 Modality Performed Procedure Step which specifies the GEMS equipment compliance to DICOM requirements for the implementation of a Modality Performed Procedure Step Service Chapter 9 X ray Radiation Dose Structured Report which specifies the GEMS equipment compliance to DICOM requirements for the implementation of a X ray Radiation Dose Structured Report Object 1 2 Quebec GE Healthcare is GE Sant in Province of Quebec Canada 1 3 Overall Dicom Conformance Statement Document Structure The Documentation Structure of the GEMS Conformance Statements and their relationship with the DICOM Conformance Statements is shown in the Illustration below Chapter 2 Introduction 23 Optima IGS 320 Optima IGS 330 Conformance Statement of DICOM Direction 5537565 1 8EN Revision 1 Illustration 2 1 GEMS DICOM
105. g and Material Management Codes Module 117 6 Standard Extended and Private Data Attrbutes esse ese ee ee ee ee Re Re ee ee ee ee RR be ee ee ee ee ee ee ee be ee 118 61 5 tandard FNCU NUS ssa et RR d ete a NE lo N utet iade Ge DoE Ee ad 118 6 2 Private Group GEMS DL STUDY Did iss dee dd 118 6 3 Private Group GEMS DEX DOSE 01 decore ettet dd 119 Chapter 9 X RAY RADIATION DOSE STRUCTURED REPORT INFORMATION OBJECT 18 IMPLEMENTATION SA reino acd e rediret Ge N dioi dero DO pce etes pet ete ER E 121 Mi ie UCI RE C CE 121 2 Optima Mapping of DICOM Entties ee ee memes 122 3 TOD Module Ee ER OE EE EE OR EE EEE AREARE 123 4 Information Module DefinitioFis rre prr cett eigen Iota ipai Pn peli er ern GR EER ee Eg 124 Ast Study nat 124 4 2 Seres Entity MOQUIES cocaina SE e eek as GN ES d een St debeo ci cg io Se oe aos bes ke Re 124 4 3 Equipment Entity Module 125 44 Document Entity Modules nics sual ae eee dee o deat Ree ee at 125 4 4 1 SR Document General Modules costes ioe dei as eet ees Meee 125 442 SR Document Content Module siese Be EERS decre cvi Gee dude yk ge Rx de ra ede 127 443 SOP Common Module ER SERE EES rc eR Re ees EE SERO Gee ee Ee Gee EE 128 5 Standard Extended and Private Context Groups see sese 129 5 1 Standard Extended and Private Context Groups oooooooocooccnccnnccnnnconnnonnnnnnnonnnonnnnnnoninininoss 129 5 2 Standard Extended Context Groups 129 5 3 Private Context Groups 129 54
106. graphy XA Information Object 73 Implementation 74 Table Y Position to Isocenter Table Z Position to Isocenter Table head tilt angle Table Head Tilt Angle precision Table cradle angle SID vector SOD vector LV Diastolic contour LV Systolic contour Default brightness contrast User brightness contrast Optima IGS 320 Optima IGS 330 Conformance Statement of DICOM Direction 5537565 1 8EN Revision 1 0019 xxEC 0019 xxED 0019 xxEE 0019 xxEF 0019 xxBC 0019 xxBE 0019 xxE9 0019 xx0C 0019 xx0D 0019 xx4E 0019 xx4F mn mn r mn r mn E mn C mn mn r 02 02 r r r ER oc el a 1 Zz Y position of the Table Reference Point with respect to the Isocenter mm posi tive values are downwards the horizontal plane in the vertical direction The value of this attribute applies to the first frame of the Multi frame image Z position of the Table Reference Point with respect to the Isocenter mm Posi tive values are towards the CRA direction of the Isocenter The value of this attrib ute applies to the first frame of the Multi frame image Angle of the head feet axis of the table in degrees relative to the horizontal plane Zero is defined when the head feet axis is in the horizontal plane Positive values are when the head of the table is up wards the horizontal plane The valid range is from 45 to 45 Contains the value of the
107. he MPPS of the image Series Uniquely identifies the refer enced SOP Class Uniquely identifies the refer enced SOP Instance Value GE MEDICAL SYS TEMS From Service User Interface configured at the installation of the system Restricted to 64 characters From Service User Interface configured at the installation of the system Restricted to 1024 characters AE title of the system Value DL From internal configuration of the machine Table 9 6 SR Document General Module Attributes Attribute Name Type Attribute Description 0020 iiia menm Chapter 9 X ray Radiation Dose Structured Report 125 Information Object Implementation 126 Optima IGS 320 Optima IGS 330 Conformance Statement of DICOM Direction 5537565 1 8EN Revision 1 Completion Flag 0040 A491 Value COMPLETE Com plete content Verification Flag 0040 A493 Value UNVERIFIED Not at tested to Content Date 0008 0023 The date the document content creation started Content Time 0008 0033 The time the document content creation started Referenced Request Sequence 0040 A370 Identifies Requested Proce dures which are being fulfilled completely or partially by cre ation of this Document One or more items may be included O gt Study Instance UID 0020 000D Restricted to 64 characters in ternally generated Identical to Study Instance UID in General Study Module From Worklist From Worklist
108. he Table Reference Point with respect to the Isocenter mm Posi tive values are towards the CRA direction of the Isocenter The value of this attribute applies to the first frame of the Multi frame image Angle of the head feet axis of the table in degrees relative to the horizontal plane Zero is defined when the head feet axis is in the horizontal plane Positive values are when the head of the table is upwards the horizontal plane The valid range is from 45 to 45 Contains the value of the first frame Precision of the Table Tilt angle ex pressed as standard deviation in degrees Contains values equal or higher than zero Angle of the left right axis of the table in degrees relative to the horizontal plane Zero is when the left right axis is in the horizontal plane Positive values are when the left of the table is upwards the horizon tal plane The valid range is from 45 to 45 Contains the value of the first frame Distance in mm from source to detector center for each frame of the multi frame image Distance in mm from source to the system isocenter This is a multi valued attribute that contains the SOD for each frame 5 Standard Extended and Private Data Attributes Optima IGS 320 Optima IGS 330 Conformance Statement of DICOM Direction 5537565 1 8EN Revision 1 Attribute Name Attribute Description and Use LV Diastolic contour 0019 xx0C FL 2 2N Diastolic contour image coordinates Three or more pairs of va
109. he exam a COMPLETED status is sent If the operator aborted the exam a DISCONTINUED status is Chapter 3 Network Conformance Statement 43 Optima IGS 320 Optima IGS 330 Conformance Statement of DICOM Direction 5537565 1 8EN Revision 1 sent and the user can select the discontinuation reason from a predefined list or add custom reason codes 3 3 5 2 Proposed Presentation context table Presentation Context Table Proposed Abstract Syntax Transfer Syntax ER UID Lis onum Modality Per 1 2 840 10008 3 1 2 3 3 Implicit VR Little Endian 1 2 840 10008 1 2 SCU None formed Proce dure Step Modality Per 1 2 840 10008 3 1 2 3 3 Explicit VR Little Endian 1 2 840 10008 1 2 1 SCU None formed Proce dure Step SOP Specific DICOM Conformance Statement for Modality Performed Procedure Step SOP Class e Optima includes Attributes in the Modality Performed Procedure Step N CREATE as described in Chapter 8 Modality Performed Procedure Step Implementation e Optima includes Attributes in the Modality Performed Procedure Step N SET as described in Chapter 8 Modality Performed Procedure Step Implementation e Optima sends N SET after the exam is ended The N SET will include all acquired images SOP Instance UIDs and the status of COMPLETED or DISCONTINUED It will not include reference of the Secondary Capture Image SOP Instances e For this SOP class all status codes with status Refused or Error are treated as failures and termina
110. he image data for the intended applications Such a validation is required before any clinical use diagnosis and or treatment is performed It applies when images acquired on GE imaging equipment are processed displayed on a non GE device as well as when images acquired on non GE equipment is processed displayed on a GE console or workstation e Future Evolution GE understands that the DICOM Standard will evolve to meet the user s growing requirements GE is actively involved in the development of the DICOM Standard DICOM will incorporate new features and technologies and GE may follow the evolution of the Standard The GEMS protocol is based on DICOM as specified in each DICOM Conformance Statement Evolution of the Standard may require changes to devices which have implemented DICOM In addition GE reserves the right to discontinue or make changes to the support of communications features on its products described by these DICOM Conformance Statements The user should ensure that any non GE provider which connects with GE devices also plans for the future evolution of the DICOM Standard Failure to do so will likely result in the loss of function and or connectivity as the DICOM Standard changes and GE Products are enhanced to support these changes e Interaction It is the sole responsibility of the non GE provider to ensure that communication with the interfaced equipment does not cause degradation of GE imaging equipment performance
111. he next C STORE operation The association will be maintained if possible Upon receiving a C STORE confirmation containing a Refused status this implementation will terminate the association No new association will be opened Upon receiving a C STORE confirmation containing a status other than Successful or Warning this implementation will consider the current request to be a failure A new association will be opened to send remaining images This implementation can perform multiple C STORE operation over a single association Establishing an association supports an Association Timer This timer starts when the association request is sent and stops when the Association response is received The time out value is 10 seconds This Association time out value is not configurable in the system If the above time out expires the association is closed and the operation in progress is considered to be failed After sending the C STORE requests system waits for a configurable Push Time out default value is 45 seconds to receive the C STORE response from the storage provider s If the storage provider s did not send the response within this time interval system times out and the C STORE operation will be considered to be FAILED Upon receiving a C STORE response containing a Successful or Warning status this implementation will perform the next C STORE operation The association will be maintained if possible Following are the status code
112. her Meaning Further Meaning Failure 0119 Class instance conflict The specified SOP Instance is not a member of the specified SOP class 0112 No such SOP Instance The SOP Instance UID specified implied a viola tion of the UID construction rules 0110 Processing failure A general failure in processing the operation was encountered 3 AE Specifications Optima IGS 320 Optima IGS 330 Conformance Statement of DICOM Direction 5537565 1 8EN Revision 1 4 Communication Profiles 4 1 Supported Communication Stacks PS 3 8 DICOM Upper Layer PS 3 8 is supported using TCP IP 4 2 OSI Stack OSI stack not supported 4 3 TCP IP Stack The TCP IP stack is inherited from a Windows Operating System 4 3 1 API Not applicable to this product 4 3 2 Physical Media Support DICOM is indifferent to the Physical medium over which TCP IP executes e g Ethernet V2 0 IEEE 802 3 ATM FDDI NOTE For more information about the Physical Media available on OPTIMA System please refer to the Product Data Sheet 4 4 Additional Protocol Support This product does not support DHCP 4 5 IPv4 and IPv6 Support This product supports only IPv4 Chapter 3 Network Conformance Statement 47 Optima IGS 320 Optima IGS 330 Conformance Statement of DICOM Direction 5537565 1 8EN Revision 1 5 Extensions Specializations Privatizations 5 1 Standard Extended SOP Classes The product provides Standard Extended Conformance to all supported SOP Classes through
113. i sau pacientului in urma pericolelor de electrocutare mecanice sau de alta natura laHHoe PYKOBOACTBO NO TEXHNYECKOMY o6cnyxuBaHuto Npe ACTAaBNeHO TOJIBKO Ha aHrTnMWACKOM A3bIKE Ecnu cepBAcHoMy nepcoHany knuenra Heo6xonAMo pyKOBOACTBO He Ha aHrTIM CKOM a Ha KAKOM TO APyrOM A3bIKe KNVEHTy CNeAyeT CAMOCTOATENbHO o6ecneuurb MEpeBon llepea TexHAHeCKAM o6cnyxuBauueM o6opynoBaHAn o683aTerbHo o6parurecb K HaHHOMy PyKOBOACTBY M no muTe U3NOXEeHHbIe B HEM CBe JeHua Heco6rioneuue rpe6oBauu nanHoro mpeAynpexAeHva Moxer MpMBecTH K TOMY uro cneunanucr no Texo6cnyxuBaHuto oneparop nnn naLMEHT nonyuur ynap SnekrpuueckuM TOKOM MeXaHuyeckyto TpaBMy unu npyroe noBpexueHue Ovo servisno uputstvo je dostupno samo na engleskom jeziku Ako klijentov serviser zahteva neki drugi jezik klijent je duzan da obezbedi prevodi la ke usluge Ne pokuSavajte da opravite uredaj ako niste procitali i razumeli ovo servisno uputst VO Zanemarivanje ovog upozorenja moze dovesti do povredivanja servisera rukovaoca ili pacijenta usled strujnog udara ili mehani kih i drugih opasnosti Tento navod na obsluhu je k dispozicii len v anglictine Ak zakaznikov poskytovatel slu ieb vyZaduje iny jazyk ako angli tinu poskytnutie prekladatelskych sluzieb je zodpovednostou zakaznika NepokuSajte sa o obsluhu zariadenia kym si neprecitate navod na obluhu a nepor ozumiete mu Zanedbanie tohto upozornenia m e sp sobi zranenie poskytovatela slu ieb
114. ich is fixed and independent from the rotation angle of the table Incremental change in Lateral position of the table in the horizontal plane relative to first frame of Multiframe image given in mm Ta ble motion towards LAO is positive Required if Table Motion is DYNAMIC NOTE If the ta ble is rotated this attribute determines a change of the table position in the LAO RAO direction of the isocenter system which is fixed and independent from the rotation angle of the table Angle of the head feet axis of the table in de grees relative to the horizontal plane Zero is defined when the head feet axis is in the hori zontal plane Positive values are when the head of the table is upwards the horizontal plane The valid range is from 45 to 45 Contains the maximum value of all the frames of the multi frame image Attribute Description Internally generated by the acquisition sys tem Distance Source to Detector 0018 1110 66 Internally generated by the acquisition sys tem 4 Information Module Definitions Optima IGS 320 Optima IGS 330 Conformance Statement of DICOM Direction 5537565 1 8EN Revision 1 AttributeName Name E NEUE Attribute Description Estimated Ek Magnification 0018 1114 Calculated from 0018 1110 and Ek 0018 1111 Positioner Motion 0018 1500 DYNAMIC if Pivot moves or C ARM moves or L arm moves or Tilt varies or Table rota tion or ISO movement happens If NO motion in Pivo
115. ion mode was designed for a subtracted or Non subtracted review Note that this indicates if one or more masks were acquired which is independ ent from the fact that the acquisition is re viewed in Sub or No Sub Defined terms are SUB NOSUB and UNKNOWN Exposure conditions pw This is a multi valued attribute that contains the pw for each frame Speed of the pivot rotation in degrees per second as specified by the operator before the acquisition Values allowed 10 or 20 or 40 or 16 or 28 deg sec Value in nGy counts computed at start of acquisition by DIGABD The value of the mR mAs calibration no units Name of the file where the DRM lookup table can be found no units DRM Strength no units Status of the rotation of the table in the horizontal plane for each frame of the multi frame image Enumberated values YES NO Incremental change in the rotation of the table in the horizontal plane clockwise when looking from above the table rela tive to the first frame of the Multi frame image in degrees Contains as many values as number of frames Required if Table Motion is DYNAMIC Incremental change in X position of the Table Reference Point with respect to the Isocenter in mm relative to the first frame of the Multi frame image Positive values are towards the LAO direction of the Isocenter Contains as many values as number of frames Required if Table Motion is DYNAMIC Incremental change
116. ision 7 Type for SCU N SET Uniquely identifies the referenced SOP Class Dose SR 2C Uniquely identifies Radiation Dose Struc tured Reports created during the acquisi tion of the procedure step and that are not referenced in Referenced Image Sequence 0008 1140 The sequence may have zero or more Items 1c C 1 Uniquely identifies the referenced SOP In stance Dose SR Type for SCU N SET N Create Sent Empty N Set Total duration of X Ray exposure during fluoroscopy in seconds pedal time during this Performed Procedure Step N Create Sent Empty N Set Total number of exposures made during this Performed Procedure Step N Create Sent Empty N Set Average entrance dose value measured in dGy at the surface of the pa tient during this Performed Procedure Step N Create Sent Empty N Set Average entrance dose value measured in mGy at the surface of the pa tient during this Performed Procedure Step N Create Sent Empty N Set Total area dose product to which the patient was exposed accumulated over the complete Performed Procedure Step andmeasured in dGy cm cm including fluo roscopy 4 Modality Performed Procedure Step Module Definitions Optima IGS 320 Optima IGS 330 Conformance Statement of DICOM Direction 5537565 1 8EN Revision 1 5 Billing and Material Management Codes Module N A Chapter 8 Modality Performed Procedure Step 117 Implementation Optima IGS 320 Optim
117. ity provides Standard Conformance to the following DICOM SOP Classes as an SCU and or as an SCP Table 3 1 3 2 Association Establishment Policies 3 2 1 General The DICOM Application Context Name ACN which is always proposed is Table 3 2 Application Context Name 1 2 840 10008 3 1 1 1 The maximum length PDU receive size for the Optima Application Entity is Table 3 3 Maximum Length PDU 1024 Kbytes NOTE This value is not configurable 3 22 Number of Associations The Optima Application Entity will initiate a maximum of 1 association at a time for each service to remote nodes The Optima Application Entity will support a maximum of 5 simultaneous associations initiated by remote nodes for the Storage Commitment Push Model 3 23 Asynchronous Nature Asynchronous mode is not supported All operations will be performed synchronously 3 2 4 Implementation Identifying Information The Implementation UID for this DICOM Implementation is Table 3 4 Optima Implementation UID 1 2 840 113619 6 364 36 3 AE Specifications Optima IGS 320 Optima IGS 330 Conformance Statement of DICOM Direction 5537565 1 8EN Revision 1 3 3 Association Initiation Policy When the Optima Application Entity initiates an Association for any Real World Activity it will propose the Presentation Contexts for all Real World Activities i e there is only a single comprehensive Presentation Context Negotiation proposed for the AE The Optim
118. le of Contents 13 Optima IGS 320 Optima IGS 330 Conformance Statement of DICOM Direction 5537565 1 8EN Revision 1 3 3 1 1 Associated Real World Activity ek 37 3 3 1 2 Proposed Presentation Context Table 37 3 3 2 Real World Activity Verification Acknowledge esse ee Ee ee ee RR Re ee ee ee 39 3 3 2 1 Associated Real World ActVItY iese ee ee ee Re ee ee AA ee ee ee 39 3 3 2 2 Proposed Presentation Context Table 39 3 3 3 Real World Activity Get Worklist iese esse se se ee Ge EE RE GOGGA EE GE AE EE ER Ge Pe ennt 39 3 3 3 1 Associated Real World AGV SEE EES deer et ia quet n ee ep endis 39 3 3 3 2 Proposed Presentation Context Table 40 3 3 4 Real World Activity Request Storage Commitment ese ee ee ee RR Re ee ee 41 3 3 4 1 Associated Real World ACHVitY ee sem 41 3 3 4 2 Proposed Presentation Context Table 41 3 3 5 Real world Activity Send MBPS idee tu ct pte ge is 43 3 3 5 1 Associated Real world Activity EE EE KEER WE GER EES RR Ee Ke ER dee kk de dee 43 3 3 5 2 Proposed Presentation context table ee ee 44 3 4 Association Acceptance Pol a AR OE OR OE OE EE es 44 SAAT Introductio EE RE EE EE get Meno OE OE ER OO 44 3 4 2 Real World Activity Verification Acknowledoe AAA 45 3 4 2 1 Associated Real World Acvitv 45 3 4 2 2 Accepted Presentation Context Table 45 3 4 3 Real World Activity Request Storage Comment 45 3 4 3 1 Associated Real World ActiVity ees ees Re RE ee ER EE Re RR d
119. lues with the co ordinates of the contour points row and column starting at 1 1 with respect to the origin upper left corner of the pixel data LV Systolic contour default brightness contrast 0019 xx4E user brightness contrast 0019 xx4F Table Vertical Position with respect to 0019 xx67 RIRP Systolic contour image coordinates Three or more pairs of values with the coordi nates of the contour points row and col umn starting at 1 1 with respect to the origin upper left corner of the pixel data The brightness contrast applied during the image acquisition Brightness from 0 0 to 100 0 Contrast from 100 0 to 100 0 The brightness contrast modified by the user during the image review Brightness from 0 0 to 100 0 Contrast from 100 0 to 100 0 Table top vertical position with respect to RIRP of the equipment in mm Table mo tion downwards is positive The value of this attribute applies to the first frame of the Multi frame image Table Longitudinal Position with respect 0019 xx68 DS 1 Table top longitudinal position with re to RIRP spect to RIRP of the equipment in mm Table motion towards CRA is positive as suming that the patient is positioned su pine and its head in normal position The value of this attribute applies to the first frame of the Multi frame image Table Lateral Position with respect to 0019 xx69 DS 1 Table top lateral position with respect to RIRP RIRP of the equipment i
120. m and visualization of the transfer status is done in a specific screen in Browser The remote system can be any DICOM SCP supporting MPPS 2 2 Functional Definition of AE s The Optima DICOM Application Entity supports the following five SCU functions 1 Copy images Dose SR s Chapter 3 Network Conformance Statement 33 34 O O Optima IGS 320 Optima IGS 330 Conformance Statement of DICOM Direction 5537565 1 8EN Revision 1 Access to patient demographics dose data and pixel Data in the local database Build a DICOM Dataset Initiate a DICOM Association to send the image s and or Dose SR s Send Images and or Dose SR s Close the association Request Storage Commitment O Initiate a DICOM Association in order to reguest Storage Commitment for the sent image s and or Dose SR s Send the N ACTION request Wait for the N ACTION RSP response Close the Association Receive N EVENT REPORT request in a separate association Send the N EVENT REPORT response Optionally in the same association opened for N ACTION request the system can wait for a configurable delay to receive the NCEVENT REPORT request and send the N EVENT REPORT response in the same association The system will accept a configurable number of DICOM associations from the Storage Commitment SCP to receive storage commitment responses Get worklist O O O O O O O O O Build a DICOM formatted basic worklist management
121. mages and or Radiation Structured Dose Reports that were previously sent trough the system to a remote DICOM application entity using the Storage Commitment Service as a Service Class User The user to check the application level communication from the Optima DICOM Server to a remote DICOM Application Entity To this aim the Optima System uses the Verification DICOM Service Class as a Service Class User The user to get from the Radiology Information System RIS the list of procedure to be performed This is done using the Basic Worklist Management DICOM Service as a Service Class User A remote Application Entity to check the application level communication with the Optima System This is done by providing the Verification DICOM Service Class as a Service Class Provider To inform a remote DICOM Application Entity that a specific Procedure Step has been started using N CREATE messages and later that this Procedure Step has been completed or discontinued using N SET messages This is done by using the Modality Performed Procedure Step service as a Service Class User Chapter 3 Network Conformance Statement 31 Optima IGS 320 Optima IGS 330 Conformance Statement of DICOM Direction 5537565 1 8EN Revision 1 2 Implementation Model 2 1 Application Data Flow Diagram The network application model for the Optima is shown in the following Illustration Illustration 3 1 Optima Network Application Model and Data Flow Diagram Association Ini
122. mation to be communicated to the Hospital Radiology information system This feature works in conjunction with DICOM Modality Worklist feature if installed However the conformance of this feature is independent of Modality Worklist feature For information on conformance of Modality Worklist feature to DICOM standard please refer to the appropriate section in this document Chapter 8 Modality Performed Procedure Step 109 Implementation Optima IGS 320 Optima IGS 330 Conformance Statement of DICOM Direction 5537565 1 8EN Revision 1 2 Relationship Between Scheduled and Performed Procedure Steps Optima supports the following relationships between Scheduled Procedure Step and PPS e One to one aka Simple Case e One to multiple aka Append Case e Zero to one aka Unscheduled Case or Acquisition without MWL Data e Zero to multiple aka Append for Unscheduled case NOTE Multiple to one relationship aka Group Case is not supported 110 2 Relationship Between Scheduled and Performed Procedure Steps Optima IGS 320 Optima IGS 330 Conformance Statement of DICOM Direction 5537565 1 8EN Revision 1 3 Modality Performed Procedure Step Module Table See DICOM PS 3 3 and PS 3 4 for a complete definition of the entities modules and attributes Table 8 1 SOP Common Module Section 4 1 SOP Common Module Performed Procedure Step Relation Section 4 2 Performed Procedure ship Module Step Relationship Module Performed Procedure S
123. motions in Pivot C L arm Rotation Tilt Patient Po sition Field Of View Origin 0018 7030 Depends on the size of the FOV imaged region of the X ray detector Field Of View Rotation 0018 7032 Clockwise rotation in degrees of Field of View that is the image pixels stored in Pixel Data relative to the physical detector Enumerated Values 0 90 180 270 Required if Field of View Horizontal Flip 0018 7034 is present Chapter 4 X Ray Angiography XA Information Object 67 Implementation Optima IGS 320 Optima IGS 330 Conformance Statement of DICOM Direction 5537565 1 8EN Revision 1 Attribute Name Attribute Description Field of View Horizontal Flip 0018 7034 1C Whether or not a horizontal flip has been applied to the Field of View that is the image pixels stored in Pixel Data 7FE0 0010 after rotation relative to the physical detector as described in Field of View Rotation 0018 7032 Enumerated Values NO YES Required if Field of View Rotation 0018 7032 is present Imager Pixel Spacing 0018 1164 1 Around 0 2 mm for FOV 120 mm to FOV 200 mm and around 0 4 mm for FOV 200 mm and above 4 5 15 VOI LUT module Table 4 23 VOI LUT Module Attributes AttibuteName Name AttributeName Tag Type Attribute Attribute Description Window center 0028 1050 1C e m of the window center optimized at the image acquisition Window width 0028 1051 Value of the window width optimized at
124. n mm Table mo tion towards LAO is positive assuming that DoseMap Irradiation Start Datetime 0019 xx72 DoseMap Irradiation End Datetime 0019 xx73 the patient is positioned supine and its 5 4 Private Group GEMS DL STUDY 01 head in normal position The value of this attribute applies to the first frame of the Private Group Private Group GEMS DL STUDY 01 is modeled as part of the Image Information Entity Multi frame image Table 5 17 Private Group GEMS DL STUDY 01 Attribute Name Tag Attribute Description and Use Start Date time of the first irradiation taken into account in the creation of dose map DoseMap irradiation start and end define the time interval in which the irradiation happened End Date time of the last irradiation taken into account in the creation of dose map DoseMap irradiation start and end define the time interval in which the irradiation happened study number 0015 xx8F Internally generated starting at 1 Chapter 5 SC Information Object Implementation 95 Optima IGS 320 Optima IGS 330 Conformance Statement of DICOM Direction 5537565 1 8EN Revision 1 AfibuteName Name Attribute Description and Use ER dose mm Sl pue dose delivered to the patient during the study in mGy study total dap 0015 xx81 Cumulative dose area product for the study in cGy cm2 study fluoro dap 0015 xx82 Cumulative dose area product for the flu oro acquisitions performed during the study in cGy cm2
125. n of each of the entities modules and attributes contained within the SR Information Objects The following modules are included to convey Enumerated Values Defined Terms and Optional Attributes supported Type 1 amp Type 2 Attributes are also included for completeness and to define what values they may take and where these values are obtained from when generating the instance It should be noted that they are the same ones as defined in the DICOM Standard Part 3 Information Object Definitions Also note that Attributes not present in tables are not supported 4 1 Study Entity Modules General Study Module Table 9 3 General Study Module Attributes Attribute Name EE Study Description 0008 1030 Name of Physician s Reading 0008 1060 Study Referenced Study Sequence 0008 1110 gt Referenced SOP Class UID 0008 1150 gt Referenced SOP instance 0008 1155 UID 4 2 Series Entity Modules SR Document Series Module Table 9 4 SR Document Series Module Attributes Attribute Description From Worklist Otherwise In ternally generated YYYYMMDD restricted to 8 characters HHMMSS XXX restricted to 10 characters From User Interface or worklist restricted to 64 characters Tag 0008 0008 From User Interface or Work list restricted to 64 characters From User Interface or Work list restricted to 16 characters Generated description from the worklist entries If no value found value is taken from us
126. nction with the DICOM Standards is intended to facilitate communication with GE imaging equipment However by itself it is not sufficient to ensure that inter operation will be successful The user or user s agent needs to proceed with caution and address at least four issues e Integration The integration of any device into an overall system of interconnected devices goes beyond the scope of standards DICOM v3 0 and of this introduction and associated DICOM Conformance Statements when interoperability with non GE equipment is desired The responsibility to analyze the applications requirements and to design a solution that integrates GE imaging equipment with non GE systems is the user s responsibility and should not be underestimated The user is strongly advised to ensure that such an integration analysis is correctly performed e Validation Testing the complete range of possible interactions between any GE device and non GE devices before the connection is declared operational should not be overlooked Therefore the user should ensure that any non GE provider accepts full responsibility for all validation required for their connection with GE devices This includes the accuracy of the Chapter 2 Introduction 25 Optima IGS 320 Optima IGS 330 Conformance Statement of DICOM Direction 5537565 1 8EN Revision 1 image data once it has crossed the interface between the GE imaging equipment and the non GE device and the stability of t
127. ngth After cian s Name user confirmation the first val ue can be mapped into Per forming Physician 0008 1050 gt Scheduled Procedure Step 0040 0007 Yes Yes Description gt Scheduled Protocol Code 0040 0008 Yes Yes Sequence Chapter 6 Modality Worklist Information Model 103 Definition Optima IGS 320 Optima IGS 330 Conformance Statement of DICOM Direction 5537565 1 8EN Revision 1 Attribute Name Tag Expected Expected Re Mapped into Matching Key turned Key the Image Type Type MPPS gt gt Code Meaning gt gt Code Meaning 0008 0104 0104 YesYes ID NOTE inthe Expected Return Key Type column indicates that this information is displayed on screen if available 3 2 Common Requested Procedure Entity Modules Requested Procedure Module Table 6 4 Requested Procedure Module Attributes Attribute Name Tag Expected Expected Re Mapped into Matching Key turned Key the Image Type Type MPPS Requested Procedure ID 0040 1001 T Yes Yes Single Value or Wild card matching is supported for this data element Requested zero length This information can be mapped into Study ID 0020 0010 after user confir mation Requested Procedure De 0032 1060 1C Yes Yes Requested zero length scription Requested Procedure Code 0032 1064 Yes Yes Sequence Code Value Value Code Value 0008 0100 0008 0100 00 YesYes E CON MEC lt Posener emos ewe
128. nte ge gie Step pee De erste ave TP peal ined eak DRS pos 57 4 2 Study Entity e rete t RE ee ese EE GER LR RR RR DOR Ee Ged Ee ER Ee Ke ee 58 4 2 1 General Study Module assi tcr Ee Ee to a Ga E RP De od De sents 58 2 2 2 Pauent Study Module sitet Setter edo Doepie EN sees ete coe aides vapeur EG oO Re sd ee 58 4 3 Series Entity Modules oet eet pe Aes SR educ cen etu a N Ee Ee ee 59 4 4 Equipment Entity Modules iss se ee RR RR RR RR Ee Re RR eek ee Re AR rhe AR AA Red rennen reni Re AA 61 4 5 Image Entity Modules caddie N to ee eG d eot bol Ne 61 4 5 1 General Image e TEE 61 4 6 2 Image Pixel Module iii 62 4 5 3 ContrasuUBolus Module es eee et EE ta 62 45e Module sa siae n ete SM e E sai Sete GE Ee 62 4 5 9 Muit Frame Module ucro to dero brem ete per eet portet Rep eed Bes GR ie 63 4 5 6 Frame Pointers Module A 63 4 5 7 IW 63 4 5 8 Display Shutter Module diia 64 45 9 X Ray mage MOG Giese aire DE GE EG ol 64 4 5 10 X Ray Acquisition Module iss se ee ee kk bee ee Ged eed ERG Ge nien ER eek ER nera denne 64 4 5 11 X Ray Collimator Module EE trit t Ee RR Ee Ke PER epe setae 65 AD 12 X Ray Table e RE E 66 4 6 13 XA Positioner Module x ss pete rto tete t clear bein ea us 66 Table of Contents 15 Optima IGS 320 Optima IGS 330 Conformance Statement of DICOM Direction 5537565 1 8EN Revision 1 4 5 14 DX Detector Module copii 67 45 15 ER UT MAd TEE 68 4 516 SOP e ele E
129. ntifier including Patient and Physician names that include extended characters will be displayed considering only the first character set and hence only the first component group will be used All other component groups of Person names will be ignored by the system 7 Support of Extended Character Sets Optima IGS 320 Optima IGS 330 Conformance Statement of DICOM Direction 5537565 1 8EN Revision 1 Chapter 4 X Ray Angiography XA Information Object Implementation 1 Introduction This section specifies the use of the DICOM X Ray Angiographic Image IOD to represent the information included in X Ray Angiographic Images produced by this implementation Corresponding attributes are conveyed using the module construct Chapter 4 X Ray Angiography XA Information Object 53 Implementation Optima IGS 320 Optima IGS 330 Conformance Statement of DICOM Direction 5537565 1 8EN Revision 1 2 Optima Mapping of DICOM Entities The Optima maps DICOM Information Entities to local Information Entities in the product s database and user interface Table 4 1 Mapping of DICOM Entities to Optima Entities DICOM IE Optima Entity Ra te Image Sequence 54 2 Optima Mapping of DICOM Entities Optima IGS 320 Optima IGS 330 Conformance Statement of DICOM Direction 5537565 1 8EN Revision 1 3 IOD Module Table The X Ray Angiographic Image Information Object Definition comprises the modules of the following table plus Standard Extended an
130. ociation If an N EVENT REPORT request is received on this association the AE will process it and send an N EVENT REPORT response on the same association The association will not be closed by the AE even if the N EVENT REPORT conveys failure Upon receiving a Storage Commitment NCEVENT REPORT Storage Commitment Result the Optima will mark all SOP Instances for which a success status is indicated Only Patients 3 AE Specifications Optima IGS 320 Optima IGS 330 Conformance Statement of DICOM Direction 5537565 1 8EN Revision 1 Studies or Instances marked COMPLETED may be deleted by user action without double confirmation If the Storage Commitment Result indicates any failure status an error message will be displayed to the user and the error including the Failure Reason 0008 1197 attribute values will be written to the error log Any retry will be manually reinitiated On retry the AE will transfer again the instances and then initiate a new Storage Commitment Request for them The AE will process each Failure Reason Code as described below ee ee Application Behavior When Receiving Reason Code Processing failure Display error in network queue No such object instance Display error in network queue Resource limitation Display error in network queue Class Instance conflict Display error in network queue Duplicate transaction UID Display error in network queue Any other status code Display error in network queue
131. odule 0008 0023 0008 0033 0008 0008 0008 0022 0008 0032 0008 2112 0008 1160 0008 1150 0008 1155 0020 4000 0028 0301 0008 2111 Table 5 10 Image Pixel Module Attributes Attribute Name Tag 1c 1c Same as acquisition date 0008 0022 Same as acquisition time 0008 0032 DERIVED PRIMARY SINGLE PLANE OR DERIVED SECONDARY SINGLE PLANE YYYYMMDD restricted to 8 characters date the sequence was acquired HHMMSS XXX restricted to 10 characters time the sequence was acquired A sequence which identifies the set of Image SOP Class Instance pairs of the images which were used to derive this image references one or more frames of a multi frame image identifying which frames were used to derive this image Uniquely identifies the referenced SOP Class Uniquely identifies the referenced SOP In stance From User Interface restricted to 64 charac ters NO for Secondary Captures Hardcoded to Secondary Capture to indi cate that the image is a secondary capture derived from a source image Attribute Description Samples per Pixel 4 Information Module Definitions Optima IGS 320 Optima IGS 330 Conformance Statement of DICOM Direction 5537565 1 8EN Revision 1 Attribute Name Ta Type Attribute Description Photometric Interpretation 0028 0004 Fac ei MONOCHROME2 me xd Jana ER Eus meme 3 E Pemeeewm ma 3
132. ointer Increment Pointer 00280009 00280009 1 wootesoesyoR ot8065 1063 OR 0018 1065 4 5 6 Pointers Module Table 4 13 Frame Pointers Module Attributes Attribute Name Attribute Description Representative Frame Number 0028 6010 Calculated as start_trim stop_trim start_trim 2 4 5 7 Mask Module This module is used only if the image may be subtracted Table 4 14 Mask Module Attributes AttibuteName Name Type Attribute Description Mask Substraction EA EE ess 6100 Defines a seguence which describe mask subtraction operations for a Multi frame Image gt Mask Operation gt Mask Operation 9028610 9028610 1 AVG SUBorNONE SUB or NONE gt Applicable Frame Range 0028 6102 A ica Frames of the mask operation applied during the last review gt Mask Frame Numbers 0028 6110 Frames selected as Mask during the last review Re quired if Mask Operation 0028 6101 is AVG_SUB gt Mask Subpixel Shift 0028 6114 Pixel shift applied during the last review Recommended Viewing Mode 0028 1090 SUB or NAT Chapter 4 X Ray Angiography XA Information Object 63 Implementation Optima IGS 320 Optima IGS 330 Conformance Statement of DICOM Direction 5537565 1 8EN Revision 1 4 5 8 Display Shutter Module Table 4 15 Display Shutter Module Attributes Attribute Name Attribute Description Shutter Shape 0018 1600 RECTANGULAR Shutter Left Vertical Edge
133. ollowing modules are included to convey Enumerated Values Defined Terms and Optional Attributes supported Type 1 amp Type 2 Attributes are also included for completeness and to define what values they may take and where these values are obtained from It should be noted that they are the same ones as defined in the DICOM v3 0 Standard Part 3 Information Object Definitions Also note that Attributes not present in tables are not supported 4 1 Patient Entity Modules 84 Patient Module Table 5 3 Patient Entity Modules Attributes Attribute Name Attribute Description Patient s Name 0010 From user interface or worklist When from user interface value contains only last_name restricted to 32 chars first name restricted to 31 chars When from worklist equals first component group From worklist or user interface Restricted to 64 chars From user interface or worklist Restricted to 8 chars YYYYMMDD From user interface or worklist M F or O Issuer of Patient ID 0010 0021 From Worklist Identifier of the Assigning Au thority system organization agency or de partment that issued the Patient ID From Worklist or User interface Other patient identifier or code Issuer of Patient ID Qualifiers Sequence 0010 0024 From Worklist Attributes specifying or quali fying the identity of the issuer of the Patient ID or scoping the Patient ID Only a single Item shall be permitted in this sequence
134. om Patient s Birth Date 0010 0030 Three digits followed by one letter In Years Y Months M Weeks W or Days D Chapter 5 SC Information Object Implementation 85 Optima IGS 320 Optima IGS 330 Conformance Statement of DICOM Direction 5537565 1 8EN Revision 1 Attribute Name Tag Attribute Description Patient s Size 0010 1020 From User Interface restricted to 16 charac ters Patient s Weight 0010 1030 3 From User Interface restricted to 16 charac ters Admission ID 0038 0010 3 From Worklist Identification number of the visit as assigned by the healthcare provider 4 3 Series Entity Modules General Series Module Table 5 6 General Series Module Attributes Attribute Name Tag Attribute Description Series Instance UID 0020 000E Unique identifier of the Series Restricted to 64 characters internally generated as fol lows registered prefix for GEMS 2 Registered prefix within GEMS a b c en coded mac address of the DL host x y z unique id protected against reinstallation and re entrance Series Number 0020 0011 A number that identifies this Series Internally generated starting at 1 Series Date 0008 0021 Date the Series started YYYYMMDD re stricted to 8 characters Series Time 0008 0031 Time the Series started HHMMSS XXX re stricted to 10 characters Performing Physicians Name 0008 1050 From User Interface restricted to 64 charac ters Protocol Name 0018 1030
135. om User Interface or worklist restricted to 16 characters May not be sent j Admission ID 0038 0010 From Worklist Identification number of the visit as assigned by the healthcare provider May not be sent 4 3 Series Entity Modules General Series Module Table 4 6 General Series Module Attributes Attribute Name Attribute Description Series Instance UID 0020 000E 1 Restricted to 64 characters internally generated as fol lows registered prefix for GEMS 2 Registered prefix with in GEMS a b c encoded mac address of the DL host x y z unique id protected against reinstallation and reen trance 0020 0011 Internally generated starting at 1 3 Series Date 0008 0021 Er YYYYMMDD restricted to 8 characters 0008 0031 HHMMSS XXX restricted to 10 characters Performing Physicians 0008 1050 From User Interface restricted to 64 characters Name Protocol Name 0018 1030 3 From User Interface user defined description of the acquisition protocol Series Description 0008 103E 3 Internally generated Series Description using Study RP SPS in formation May not be sent Operators Name 0008 1070 3 From User Interface restricted to 64 characters May not be sent Referenced Performed 0008 1111 3 Uniquely identifies the Modality Performed Procedure Step Procedure Step Sequence SOP Instance Present only if MPPS Option is enabled May not be sent gt Reference SOP Clas
136. on 3Dcal algorithm version version 0021 xx0D aal LO 1 Version of the calibration algorithm of the calibration Version of the calibration algorithm 3Dcal 3D frame unit size 0021 xx0E mL in mm of the unity used to describe the 3D frame dimensions 3Dcal calibration mode 0021 xx0F Internal code used to classify the differ ent modes of calibration 3Dcal image frame origin row 0021 xx10 Vertical coordinate of the origin of the im age frame used for the calculation of the projection matrices given as row of the calibration image starts at 0 3Dcal image frame origin column 0021 xx11 Horizontal coordinate of the origin of the image frame used for the calculation of 3Dcal positioner pivot rotation speed 0021 xx12 the projection matrices given as column 3Dcal number of images 0021 xx13 of the calibration image starts at 0 Speed of the pivot rotation in degrees per second as specified by the operator before the acquisition of the calibration phantom Note this speed may be slight ly different from the actual speed of the gantry due to mechanical constraints like acceleration Number of projections acquired during the acquisition of the calibration phan tom Distance between the center of each pix el of the image of the calibration phan tom specified by a pair row spacing val ue delimiter column spacing value in mm 3Dcal image pixel spacing 0021 xx15 3Dcal centering mode
137. on extended calibration image original 0019 xx89 calibration frame original 0019 xx8A calibration number of points uif 0019 xx8B 5 Standard Extended and Private Data Attributes Optima IGS 320 Optima IGS 330 Conformance Statement of DICOM Direction 5537565 1 8EN Revision 1 Attribute Name Attribute Description and Use ISO x versus RIRP 0019 xx7A DS 1 Position in mm of the Frontal respectively Lateral Isocenter in the RIRP referential along the X axis Positive values are to wards the X direction of the Isocenter Co ordinate System LAO direction The val ue of this attribute applies to the first frame of the Multi frame image ISO y versus RIRP 0019 xx7B DS 1 Position in mm of the Frontal respectively Lateral Isocenter in the RIRP referential along the Y axis Positive values are downwards the horizontal plane in the ver tical direction The value of this attribute applies to the first frame of the Multiframe image ISO z versus RIRP DS 1 Position in mm of the Frontal respectively Lateral Isocenter in the RIRP referential Gantry Trajectory Vector 0019 xx6D along the Z axis Positive values are to calibration points row 0019 xx8C wards the CRA direction of the Isocenter The value of this attribute applies to the first frame of the Multi frame image Type of positioner trajectory of each frame S SWIVEL P PANNING B BACKOUT O PARKING OUT U UNKNOWN Location of the
138. ormed Location 0040 0243 EMPTY Performed Procedure Step Start Date 0040 0244 1 Date on which the Performed Procedure Step started Performed Procedure Step Start Time 0040 0245 1 Time at which the Performed Procedure Step started Chapter 8 Modality Performed Procedure Step 113 Implementation 114 Optima IGS 320 Optima IGS 330 Conformance Statement of DICOM Direction 5537565 1 8EN Revision 1 Attribute Name Type for Type for SCU N SCU N SET CREATE Performed Procedure Step Status 0040 0252 1 3 Contains the state of the Performed Proce dure Step Enumerated Values IN PROGRESS Started but not complete DISCONTINUED Canceled or unsuccess fully terminated COMPLETED Successfully completed Performed Procedure Step Description 0040 0254 2 3 Institution generated description or classifi cation of the Procedure Step that was per formed formed Performed Procedure Code Sequence 0008 1032 2 3 For Scheduled cases copy from Requested Procedure Code Sequence Sent Empty in case of unscheduled exams gt Code Value 0008 0100 1C 1C The Code Value 0008 0100 is an identifier that is unambiguous within the Coding Scheme denoted by Coding Scheme Desig nator 0008 0102 and Coding Scheme Ver sion 0008 0103 gt Coding Scheme Designator 0008 0102 1C 1C The attribute Coding Scheme Designator 0008 0102 identifies the coding scheme in which the code for a term is defined gt Code Meaning 0008 0104 3 3
139. points that define the cali bration object given as row Ratio between the SID over the distance from source to the center of the calibration object gt 1 0 no units calibration magnification ratio 0019 xx8E calibration sw version 0019 xx8F extend calibration sw version 0019 xx90 calibration return code 0019 xx91 Distance Object to Table Top 0019 xx2B Distance between the object of observa tion and table top in mm image detector rotation angle 0019 xx92 Image rotation at the detector reading in degrees before image flip Chapter 5 SC Information Object Implementation 93 String containing algorithm generation al gorithm version and algorithm release A new release does not change the algo rithm only change code structure I O code optimization no units String containing algorithm generation al gorithm version and algorithm release A new release does not change the algo rithm only change code structure I O code optimization no units code returned by the calibration algorithm no units calibration points column 0019 xx8D US 1 2 Location of the points that define the cali bration object given as column 94 Attribute Name Optima IGS 320 Optima IGS 330 Conformance Statement of DICOM Direction 5537565 1 8EN Revision 1 Tag image flip 0019 xx95 can downscan 512 table rotation angle Table X Position to Isocenter Table Y Position to Isocenter Table Z Posi
140. pter 3 Network Conformance Statement 49 50 Optima IGS 320 Optima IGS 330 Conformance Statement of DICOM Direction 5537565 1 8EN Revision 1 The following fields are configurable for every remote DICOM AE used as Image storage SCP e Remote AE Title e Remote IP Address e Listening TCP IP Port Number e Array size of the pixel data to be transferred 512x512 or any size up to 1024x1024 e General Settings o 3D Reconstruct Host O Auto Push Default m Auto Push If this parameter is set at the end of every acquisition Optima automatically pushes the images to the storage provider s The following fields are configurable for every remote DICOM AE used as Image storage commitment SCP e Archive Station Option e Remote Storage Commitment SCP AE Title e Remote Storage Commitment SCP IP Address e Remote Storage Commitment SCP Listening TCP IP Port Number The following fields are configurable for every remote DICOM AE used as Dose SR storage SCP e Remote AE Title e Remote IP Address e Listening TCP IP Port Number The following fields are configurable for every remote DICOM AE used as Dose SR storage commitment SCP e Archive Station Option e Remote Storage Commitment SCP AE Title e Remote Storage Commitment SCP IP Address e Remote Storage Commitment SCP Listening TCP IP Port Number The following fields are configurable for the DICOM AE used as worklist SCP e Remote AE Title e Remote IP Address 6 Configura
141. ptima AE can automatically retry sending the N ACTION request to the storage commitment provider s The Maximum Number of Retries and the Delay between the retries is configurable By default the Maximum number of retries 3 and Delay between auto retries 30 secs If the N ACTION response conveys failure status the association is closed by the AE Following are the status codes that are more specifically processed when receiving N ACTION responses from a Storage Commitment SCP N ACTION response Status Codes Service Status Status Codes Further Meaning Application Behavior When Re Related Fields Processed ceiving Status Codes if Received Success OOOOH successful reguest Waiting for storage commitment None response Failed 0213H Resource limitation Automatic retry of storage com mitment request for a configura ble number of times with a config urable delay between retries Failed Other than Failure reason other than re Display error status in network None above source limitation queue After receiving the successful N ACTION response AE will keep the association open for a configurable delay default is 60 seconds During this delay AE will accept N EVENT REPORT requests sent by the remote SCP for the SOP instances referenced in the current N ACTION request or any N ACTION request s sent previously The association is closed when this timeout expires and there is no active transaction performed by the system linked to this ass
142. r the images have been successfully exported to the receiving station this parameter determines the amount of time Optima waits to attempt the Storage Commitment requests to the Storage Commitment provider s Request timeout Amount of time the association is held open after the Storage Commitment request is sent If the timeout is over Optima will automatically release the association without receiving acknowledgement from the storage commitment provider s The default request timeout value is 60 sec Maximum number of concurrent associations Maximum number of simultaneous connections that Optima can accept from the storage commitment provider s to receive the storage commitment responses Maximum number of automatic retry After sending the Storage commitment request to the storage commitment provider s and if the storage commitment provider s sends a busy signal resource limitation as a Storage commitment response this parameter determines the maximum number of times Optima automatically retries sending the storage commitment request to the storage commitment provider s Delay between automatic retries After sending the Storage commitment request to the storage commitment provider s and if the storage commitment provider s sends a busy signal as a Storage commitment response this parameter determines the delay between the automatic retries of Optima NOTE AGE Field Engineer must perform all the above configurations Cha
143. r volume calculat ed by the Dodge s method from the con tour of the left ventricle traced by an ex pert Intercept coefficient in cm3 of the linear regression correction of the Left Ventricu lar volume This linear regression cor rects the Left Ventricular volume calculat ed by the Dodge s method from the con tour of the left ventricle traced by an ex pert Absolute Vertical position of the table in mm with respect to the table referential Down moving is positive The value of this attribute applies to the first frame of the Multi frame image Absolute Longitudinal position of the ta ble in mm with respect to the table ref erential Head moving is positive The value of this attribute applies to the first frame of the Multi frame image Absolute Lateral position in mm of the table with respect to the table referential Left moving is positive The value of this attribute applies to the first frame of the Multi frame image Positioner angle for L arm in degrees Movement positive when rotating from RAO to LAO patient HFS no table rota tion Positioner angle for Pivot arm in degrees Movement is positive when rotating from RAO to vertical patient HFS no table ro tation Positioner angle for C arm in degrees Movement is positive when rotating from CAU to vertical patient HFS no table ro tation 91 Optima IGS 320 Optima IGS 330 Conformance Statement of DICOM Direction 5537565 1 8EN Revision
144. rnally generat ed as follows registered prefix for GEMS 2 Registered prefix within GEMS a b c encoded mac address of the DL host x y Z unique id protected against reinstal lation and re entrance Study Date 0008 0020 YYYYMMDD restricted to 8 characters Study Time 0008 0030 HHMMSS XXX restricted to 10 characters Referring Physician s Name 0008 0090 2 Patient s referring physician From User In terface or worklist restricted to 64 charac ters Study ID 0020 0010 2 From User Interface or Worklist restricted to 16 characters Accession Number 0008 0050 2 From User Interface or Worklist restricted to 16 characters Study Description 0008 1030 3 Generated description from the Worklist en tries for Requested Procedure If no value found the value is taken from User Interface Name of Physician s Reading Study 0008 1060 3 Physician reading the exam From User In terface restricted to 64 characters Referenced Study Sequence 0008 1110 3 From Worklist The sequence may have zero or more Items gt Referenced SOP Class UID 0008 1150 1 From Worklist Required if a sequence item is present gt Referenced SOP instance UID 0008 1155 From Worklist Required if a sequence item is present 4 22 Patient Study Module Table 5 5 Patient Study Module Attributes AttributeName Name HENCE JEN UAE uH Attribute Description Patient s Age 0010 1010 Either from User Interface or Calculated fr
145. rresponds to the v2 of the filter design Values from 0 to 7 Default spatial filter family v2 0019 xx77 Current spatial filter family sub 0019 xx78 Current spatial filter family no sub 0019 xx79 5 5 Private Group GEMS_DL_STUDY_01 Private Group GEMS DL STUDY 01 is modeled as part of the Image Information Entity Table 4 29 Private Group GEMS DL STUDY 01 Attribute Name Ta vR Attribute Description and Use study number 0015 xx8F E Internally generated starting at 1 study dose 0015 xx80 Total dose delivered to the patient during the study in mGy study total dap 0015 xx81 Cumulative dose area product for the study in cGy cm2 The family of the spatial filters applied during the image review This value cor responds to the filter family applied dur ing subtracted review mode Value from 0 to 7 The family of the spatial filters applied during the image review This value cor responds to the filter family applied dur ing non subtracted review mode Values from 0 to 7 Dose reduction strategy 0019 xx76 M study fluoro dap 0015 xx82 Cumulative dose area product for the flu oro acquisitions performed during the study in cGy cm2 study fluoro time 0015 xx83 IS 1 Total time of fluoroscopy during the study in seconds study record dap 0015 xx84 DS 1 Cumulative dose area product for the re cord acquisitions performed during the study in cGy cm2 Chapter 4 X Ray Angiography XA Information
146. rvice Request Entity Modules ss ee ee ee ee ee ee ee ee ee ee ee ee 104 3 4 Common visit Entity Modules esse essensies ge Ses ge cre Ee ve deme See e Deck uter anres Ee 105 3 5 Common Patient Entity Modules rrt a 105 3 9 Palentldenhiical n EE rtu GR ESE EER GER Rite EG DA Ge tentis 105 2 92 Patient Demo psss EE 106 Chapter 7 STORAGE COMMITMENT PUSH MODEL IMPLEMENTATION ee ees esse ee esse ee ese ee 107 1 Storage Commitment Push Model Implementaton ee ee ee ee ee RR Re ee ee ee ee 107 1 1 Storage commitment push model implementation RR ER RR RR RR Ee RE ee RE RR ee ee 107 1 2 Storage Commitment Module for N ACHON ee ee Re ee ee Re n 107 1 3 Storage Commitment Module for N Event Report essen 107 Chapter 8 MODALITY PERFORMED PROCEDURE STEP IMPLEMENTATION 109 W Introduction EE EL re 109 Table of Contents 17 Optima IGS 320 Optima IGS 330 Conformance Statement of DICOM Direction 5537565 1 8EN Revision 1 2 Relationship Between Scheduled and Performed Procedure Giens 110 3 Modality Performed Procedure Step Module Table 111 4 Modality Performed Procedure Step Module Defmtons iese ee ee ee ee RR Re ee ee ee ee ee Re ee 112 4 1 SOP Common Module iss EE ia d De 112 4 2 Performed Procedure Step Relationship Module 112 4 3 Performed Procedure Step Information Module 113 4 4 Image Acquisition Result Module ceden leeis 115 4 5 Radiation Dose Oe e HIE 116 5 Billin
147. s End Systolic Volume 0009 xx44 End Systolic Volume given in cubic cen timeters Stroke Volume 0009 xx45 p Stroke Volume given in cubic centime ters Ejection Fraction 0009 xx47 Ejection Fraction expressed as a per centage Body Surface Area 0009 xx48 ES Body Surface Area given in sguare me Artery Territory Region 000949 SH 1 Region of interest as selected by the user Defined terms RCA LAD CFX Number of Diseased Vessels 0009 xx50 IS 1 The number of diseased vessels in the region of interest as selected by the user Hypokinesis in Region 0009 xx51 The amount of hypokinetic wall motion in the region of interest in standard devia tions i d i Hyperkinesis in Opposite Region 0009 xx52 The amount of hyperkinetic wall motion in the region opposite the region of interest in standard deviations Percent Total LV Hypokinesis 0009 xx53 Percentage of chords in the total LV con tour which are hypokinetic by more than 2 standard deviations Calibration Factor 0009 xx55 Millimeter per pixel 5 8 Private Group GEMS_DL_SERIES_01 Private Group Private Group GEMS_DL_SERIES_01 is modeled as part of the Image Information Entity Table 5 21 Attribute Name Attribute Description and Use Table ID 0019 xx56 LO 1 Identifer of the Table Value OMEGA ELEGANCE Chapter 5 SC Information Object Implementation 99 Optima IGS 320 Optima IGS 330 Conformance Statement of DICOM Direction 5537
148. s 0008 1150 1C Uniquely identifies the MPPS SOP Class Required if a se UID quence item is present gt Reference SOP instance 0008 1155 1C Uniquely identifies the MPPS SOP Instance Required if a se UID quence item is present Chapter 4 X Ray Angiography XA Information Object 59 Implementation 60 Optima IGS 320 Optima IGS 330 Conformance Statement of DICOM Direction 5537565 1 8EN Revision 1 Attribute Name ENS A Attribute Description Patient position 0018 5100 Patient position descriptor relative to the equipment Defined terms are HFP Head First Prone HFS Head First Supine HFDR Head First Decubitus Right HFDL Head First Decubitus Left FFDR Feet First Decubitus Right FFDL Feet First Decubitus Left FFP Feet First Prone FFS Feet First Supine Body Part Examined Body Part Examined Examined 0018 0015 LP ee Text description of the part of the body examined description of the part of the body examined Request attribute se 0040 0275 Sequence that contains attributes from the Imaging Service Re quence quest The sequence may have only one item gt Request procedure id 0040 1001 Identifier that identifies the Requested Procedure in the Imaging Service Request Required if Sequence Item is present gt Requested Procedure 0032 1060 3 Institution generated administrative description or classification Description of Requested Procedure May not be sent gt Requested procedure
149. s that are more specifically processed when receiving messages from a Storage SCP equipment Service Status Status Codes Further Meaning Application Behavior When receiv Related Fields Processed if re ing Status Codes ceived Refused ATxx Out of resources Send operation failed Root 0000 0902 cause indicated in error log Will continue to attempt any remaining send operations 0122 SOP Class not Sup Send operation failed Root 0000 0902 ported cause indicated in error log Will continue to attempt any remaining send operations Cannot Understand Send operation failed Root 0000 0901 0000 0902 cause indicated in error log Will continue to attempt any remaining send operations 3 AE Specifications Optima IGS 320 Optima IGS 330 Conformance Statement of DICOM Direction 5537565 1 8EN Revision 1 Service Status Status Codes Further Meaning Application Behavior When receiv Related Fields Processed if re ing Status Codes ceived Data Set does not Send operation failed Root 0000 0901 0000 0902 match SOP Class cause indicated in error log Will continue to attempt any remaining send operations BOOO Coercion of Data Ele Send operation successful None ments B007 Data Set does not Send operation successful None match SOP Class B006 Elements Discarded Send operation successful were 3 3 2 Real World Activity Verification Acknowledge 3 3 2 1 Associated Real World Activity
150. s the horizontal plane Units EV deg UCUM deg Chapter 9 X ray Radiation Dose Structured Report 137 Information Object Implementation 138 Optima IGS 320 Optima IGS 330 Conformance Statement of DICOM Direction 5537565 1 8EN Revision 1 NL Rel with Pa VT Concept Name VM Req Condition Value Set Constraint rent Type CONTAINS NUM EV 113755 DOM Table 1 U Rotation of the table in the Horizontal Rotation Angle horizontal plane in de grees Zero is defined when the head feet axis of the table is aligned with the CRA CAU axis of the Isocenter Z Positive an gles are clockwise when looking at the table from upwards Units EV deg UCUM deg CONTAINS NUM EV 113756 DCM Table Units EV deg UCUM Cradle Tilt Angle deg CONTAINS CODE EV 123014 DCM Tar See DCID 4031 get Region CONTAINS CODE EV 111632 DCM Anode C 164F9 SRT Tungsten Target Material 8 or Tungsten compound Not Used Not Used Units mm UCUM mil limeter 0 EED NTAINS NUM EV 111634 DCM Half Value Layer Contains 0 to 2 items If No grid applied Value 111646 DCM No grid If Grid is applied Value 111641 DCM Fixed grid and 111642 DCM Fo cused grid 51 co NUM EV cod002 DCM Pa tient Equivalent Thick ness 52 CONTAINS CODE EV 111635 DCM X Ray Grid Et Mil ment PersonProcedureRole EV 113851 DCM Irradi
151. sion 1 NL Rel with Pa Concept Name Req Condition Value Set Constraint rent Type CONTAINS NUM DCID 10008 Dose Relat Units EV mm UCUM ed Distance Measure mm Includes the follow ments ing measurements DCM 113748 Distance Source to Isocenter DCM 113737 Distance Source to Reference Point DCM 113750 Distance Source to Detector DCM 113751 Table Lon gitudinal Position Absolute Longitudinal position of the table in mm with respect to the ta ble referential Head mov ing is positive DCM 113752 Table Lat eral Position Absolute Lateral position in mm of the table with respect to the table refer ential Left moving is posi tive DCM 113753 Table Height Position Absolute Vertical position of the table in mm with respect to the table refer ential Down moving is positive DCM 113759 Table Lon gitudinal End Position Table Longitudinal posi tion at the end of an Irradi ation event DCM 113760 Table Lat eral End Position Table Lateral position at the end of an Irradiation event DCM 113761 Table Height End Position Ta ble Height position at the end of an Irradiation event CONTAINS NUM EV 113754 DOM Table Angle of the head feet ax Head Tilt Angle is of the table in degrees relative to the horizontal plane Zero is defined when the head feet axis is in the horizontal plane Positive values are when the head of the table is up ward
152. ssist ncia t cnica solicitar a tradu o deste manual caber ao cliente fornecer os servi os de tradu o e Nao tente reparar o equipamento sem ter consultado e compreendido este manual de assist ncia t cnica e A n o observ ncia deste aviso pode ocasionar ferimentos no t cnico operador ou paciente decorrentes de choques el tricos mec nicos ou outros Este manual de assist ncia t cnica s se encontra dispon vel em ingl s e Se qualquer outro servico de assist ncia t cnica solicitar este manual noutro idio ma da responsabilidade do cliente fornecer os servi os de tradu o e Nao tente reparar o equipamento sem ter consultado e compreendido este manual de assist ncia t cnica e Ondao cumprimento deste aviso pode colocar em perigo a seguran a do t cnico do operador ou do paciente devido a choques el ctricos mec nicos ou outros ATENTIE RO OCTOPOXHO RU UPOZORENJE SR UPOZORNENIE SK ATENCION ES Optima IGS 320 Optima IGS 330 Conformance Statement of DICOM Direction 5537565 1 8EN Revision 1 Acest manual de service este disponibil doar in limba engleza Daca un furnizor de servicii pentru clienti necesita o alta limba decat cea engleza este de datoria clientului sa furnizeze o traducere Nu incercati sa reparati echipamentul decat ulterior consultarii si intelegerii acestui manual de service Ignorarea acestui avertisment ar putea duce la ranirea depanatorului operatorulu
153. t frame of the Multi frame image Table Longitudinal Position with respect 0019 xx68 Table Top Longitudinal position with re to RIRP spect to RIRP of the quipment in mm Table motion towards CRA is positive as suming that the patient is positioned su pine and its head is in normal posi tion The value of this attribute applies to the first frame of the Multi frame image Table Lateral Position with respect to 0019 xx69 Table Top Lateral position with respect to RIRP RIRP of th eequipment in mm Table motion towards LAO is positive assuming that the patient is positioned supine and its head is in normal position The value of this attribute applies to the first frame of the Multi frame image Table Vertical Position with respect to 0019 xx6A DS 1 N Incremental change in Vertical position of RIRP increment the table relative to RIRP versus first frame of Multi frame image given in mm Sent only if Table Motion is equal to DY NAMIC Table Longitudinal Position with respect 0019 xx6B DS 1 N Incremental change in Longitudinal posi to RIRP increment tion of the table relative to RIRP versus first frame of Multi frame image given in mm Sent only if Table Motion is equal to DYNAMIC Table Lateral Position with respect to 0019 xx6C DS 1 N Incremental change in Lateral position of RIRP increment the table relative to RIRP versus first frame of Multi frame image given in mm Sent only if Table Motion is equal to DY NA
154. t or C arm or Tilt or Table rotation or ISO then it will be sent as STATIC Position of the Xray Image Intensifier about the patient from the CAU to CRA direction where movement from CAU to vertical is positive For multi frame images value of the first frame Note The values correspond to the motions in Pivot C L arm Rotation Tilt Patient Po sition Positioner Secondary Angle 0018 1511 Positioner Primary Angle Increment 0018 1520 Positioner Secondary Angle Increment 0018 1521 4 5 14 DX Detector Module Table 4 22 DX Detector Module Attributes Attribute Name Ta Type Attribute Description Detector Type 0018 7004 MESE SCINTILLATOR Field of View Shape 0018 1147 ME 4 RECTANGLE Field of View Dimension s 0018 1149 3 From user selection in the User Interface of the ac quisition system Possible values are 4001400 OR 3201320 OR 3001300 OR 2001200 OR 1721172 OR 170470 OR 1601160 OR 1501150 OR 1471147 OR 121421 OR 1201120 Value of the RAO LAO increments relative to the first frame Required if positioner motion is DYNAMIC Value of the CRA CAU increments relative to the first frame Required if positioner motion is DYNAMIC Positioner Primary Angle 0018 1510 Position of the Xray Image Intensifier about the patient from the RAO to LAO direction where movement from RAO to vertical is positive For multi frame images value of the first frame Note The values correspond to the
155. te the association and operation All status codes with status Warning or Success are treated as successes e lf either N CREATE or N SET fails the MPPS transaction is considered to be failed e If N CREATE fails the corresponding N SET will not be sent to the SCP Re sending failed MPPS will re send both N CREATE and N SET to the SCP e If N CREATE succeeds and N SET fails Re sending failed MPPS will only re send the failed N SET to the SCP NOTE The default timeout to receive the N CREATE or N SET response is 10 secs and is not configurable 3 4 Association Acceptance Policy 3 4 1 Introduction The Optima DICOM AE places no limitation on who may connect to it Any remote AE can open an association to the Optima DICOM AE for the purpose of application level communication verification IB AE Specifications Optima IGS 320 Optima IGS 330 Conformance Statement of DICOM Direction 5537565 1 8EN Revision 1 3 4 2 Real World Activity Verification Acknowledge 3 4 2 1 Associated Real World Activity The Optima DICOM AE is always listening to associations No operator action is required to respond to a Verification request from any DICOM node 3 4 2 2 Accepted Presentation Context Table Presentation Context Table Proposed Abstract Syntax Transfer Syntax e Extended Negotiation Verification SOP 1 2 840 10008 1 1 Implicit VR Little Endian 1 2 840 10008 1 2 None Class Explicit VR Little Endian 1 2 840 10008 1 2 1 Expli
156. tep Informa Section 4 3 Performed Procedure tion Module Step Information Module Image Acquisition Result Module Section 4 4 Image Acquisition Result Module Radiation Dose Module Section 4 5 Radiation Dose Module Billing and Material Management Co Not Used des Module Chapter 8 Modality Performed Procedure Step 111 Implementation Optima IGS 320 Optima IGS 330 Conformance Statement of DICOM Direction 5537565 1 8EN Revision 1 4 Modality Performed Procedure Step Module Definitions Please refer to DICOM Standard PS 3 3 Information Object Definitions for a description of each of the attributes contained within the Modality Performed Procedure Step Information Object Definition 4 1 SOP Common Module Table 8 2 SOP Common Module Attributes Attribute Name Type for Type for SCU N SCU N SET CREATE Specific Character Set 0008 0005 ME EEN ISO IR 100 4 2 Performed Procedure Step Relationship Module Table 8 3 Performed Procedure Step Relationship Module Aftributes Aftribute Name Type for SCU N CREATE Ek EE pis MWL En Acquisition with MWL Entry Scheduled Scheduled Step Attributes Sequence Attributes Sequence 0040 0270 0270 1 Has er one item 1 Has 1 Has only one item one item a Instance UID 0020 ie de po is a generat eS UM filled from worklist gt Referenced Study Sequence 0008 1110 2 Sent EMPTY For scheduled cases the value comes from Worklist If Not available in Worklist SOP Class UI
157. termination of the exam Also can be optionally transferred through the User Interface known as Browser Selection of Remote System and visualization of the transfer status is done in a specific screen in Browser The remote system can be any DICOM storage SCP supporting X Ray Radiation Dose Structured Report Information Object Request storage commitment consists of an automatic request performed by the system after each successful image transfer or after each successful Dose SR transfer to request Transfer of Ownership for the Images and Dose SR s that have been transferred earlier by the Copy Image Dose SR real world activity The remote system shall be a DICOM Storage Commitment SCP Get Worklist activity consists of an operator request for the transfer of a list of procedure to be performed on the Optima acquisition system from a remote HIS RIS system The Remote system can be any DICOM modality worklist SCP Query keys can be entered for the following items e Patient Name e Patient ID e Accession number e Procedure ID The system can be configured to query for its own modality XA or AE Title A date or a date range for the query can also be specified Verification consists of an operator request for the verification of the availability of a remote station Provide MPPS Information entity consists of automatic MPPS transactions generated by the system during the start and termination of the exam Selection of Remote Syste
158. th respect to the origin of the FOV area starting at 0 column number of the origin of the zoomed area with respect to the origin of the FOV area starting at 0 5 Standard Extended and Private Data Attributes Optima IGS 320 Optima IGS 330 Conformance Statement of DICOM Direction 5537565 1 8EN Revision 1 Attribute Name Attribute Description and Use User spatial filter strength 0019 xx17 IS 1 The strength of the spatial filters no units selected by the user during the im age Review Values from 1 to 7 5 3 Private Group GEMS_XR3DCAL_01 Private Group GEMS_XR3DCAL_01 is modeled as part of the Image Information Entity Table 4 27 Private Group GEMS_XR3DCAL_01 Attribute Name Attribute Description and Use 3Dcal image rows 0021 xx01 IS 1 Number of rows of the image of the cali bration phantom helix that has been used to determine the projection matri ces 3Dcal image columns 0021 xx02 IS 1 Number of columns of the image of the calibration phantom helix that has been used to determine the projection matri ces 3Dcal field of view 0021 xx03 FL 1 Field of View in mm applied to the ac quisition of the calibration phantom he lix Note the size of the image of the cal ibration phantom may be bigger than the Field of View region 3Dcal acquisition date 0021 xx04 DA 1 Date of the acquisition of the calibration phantom 3Dcal acquisition time 0021 xx05 Time of the acquisition of the calibration phantom
159. the image acquisition 4 5 16 SOP Common Module Table 4 24 SOP Common Module Attributes Attribute Name Attribute Description SOP Class UID 0008 0016 1 2 840 10008 5 1 4 1 1 12 1 SOP Instance UID 0008 0018 1 Restricted to 64 characters internally generated as follows registered prefix for GEMS 2 Regis tered prefix within GEMS a b c encoded mac address of the DL host x y z unique id protected against reinstallation and re entrance Specific Character Set 0008 0005 ISO IR 100 Instance Number 0020 0013 Internally generated starting at 1 68 4 Information Module Definitions Optima IGS 320 Optima IGS 330 Conformance Statement of DICOM Direction 5537565 1 8EN Revision 1 5 Standard Extended and Private Data Attributes The Product supports the Standard and Private Attributes defined in the following sections in Standard Extended X Ray Angiographic SOP Instances as Type 3 data elements 5 1 Standard Attributes The Product supports the following attributes not specified in the X Ray Angiographic IOD in SOP Instances as Type 3 data elements Table 4 25 Standard Extended Attributes Information Entity Name Attribute Name Tag points in this Curve short US Curve Data 5000 3000 Points in the curve each dimension for the first point fol lowed by dimen sions for second point etc 5 2 Private Group DLX SERIE 01 Private Group DLX SERIE 01 is modeled as part of the
160. the inclusion of additional Type 3 Standard Elements and Private Data Elements The extensions are defined in Sections e Chapter 4 Chapter 4 X Ray Angiography XA Information Object Implementation e Chapter 5 Chapter 5 SC Information Object Implementation 48 5 Extensions Specializations Privatizations Optima IGS 320 Optima IGS 330 Conformance Statement of DICOM Direction 5537565 1 8EN Revision 1 6 Configuration GEMS Field Service Engineers configure the OPTIMA System The DICOM configuration items below are configurable or re configurable by a Field Service Engineer 6 1 AE Title Presentation Address Mapping The OPTIMA System DICOM SERVER AE allows for the configuration of the mapping of remote AE titles to IP addresses and ports The IP address of a remote AE may be in a different sub net using routing GEMS Field Service Engineers perform this configuration 6 2 Configurable Parameters The following fields are configurable for this AE local Local AE Title Local IP Address Local IP Netmask NOTE The local listening port number is not configurable for this product and is equal to 4002 The following field is configurable for the DICOM AE used as store SCP Push Timeout After the transfer of images Optima waits for this maximum time period to receive the response from the storage provider s The following fields are configurable for the DICOM AE used as storage commitment SCP Delay after Push Afte
161. the spectral filter applied to optimize the image quality in um default spatial filter family 0019 xx31 IS 1 The family of the spatial filters applied during the image acquisition default spatial filter strength 0019 xx32 IS 1 The strength of the spatial filters applied during the image acquisition Values from 1 to 9 5 Standard Extended and Private Data Attributes 1 E 1 Optima IGS 320 Optima IGS 330 Conformance Statement of DICOM Direction 5537565 1 8EN Revision 1 The strength of the spatial filters selected by the user in DL during the image Re view Values from 1 to 9 Defined terms VASCULAR OTHER Defined terms YES NO Expected number of frames in a 3D spin Specifies the autoexposure preference that allows selecting between several strategies impacting Dose and Image Quality current spatial filter strength 0019 xxAB 3D structure of interest 0019 xxC8 3D calibration out of date flag 0019 xxC9 3D spin expected number of frames 0019 xxCA Auto exposure preference 0019 xx74 Detail level 0019 xx75 Specifies the detail level which includes two settings Low and Normal There is about 50 less Air Kerma rate in Low versus Normal except at max Fluoro dose limits Specifies the Dose Reduction Strategy that allows selecting between two strat egies for reducing dose when lowering fluoro frame rates The family of the spatial filters applied during the image acquisition This value co
162. tiation Copy Images Dose SR Request Storage Commitment Optima DICOM Application Entity Association Acceptance and Initiation Provide Worklist Response Get Worklist Remote Request or oyun Request or Acknowledge pue Peras a Verification Verification Store MPPS Information 1 DICOM Standard Interface The Optima DICOM Application Entity is an application which handles DICOM protocol communication Optima DICOM AE is automatically brought up when the Optima system is powered on All remote DICOM AE must be manually configured on the Optima usually at the software installation time by a GE Field Engineer There are five local Real World activities which can cause the Optima DICOM AE to initiate a DICOM association 32 2 Implementation Model Optima IGS 320 Optima IGS 330 Conformance Statement of DICOM Direction 5537565 1 8EN Revision 1 e Copy Images Dose SR e Request Storage Commitment for a set of images and or Dose SR s e Get Worklist e Verification e Provide MPPS Copy Image consists of an operator selecting one or several images through the User Interface known as Browser and Viewer Selection of Remote System and visualization of the transfer status is done in a specific screen The remote system can be any DICOM storage SCP supporting XA modality Copy Dose SR consists of automatic Dose SR transactions generated by the system during the
163. tion Optima IGS 320 Optima IGS 330 Conformance Statement of DICOM Direction 5537565 1 8EN Revision 1 e Listening TCP IP Port Number e General Settings Automatic Retrieve of Worklist at boot option e The default request timeout value is 60sec The following fields are configurable for the DICOM AE used as MPPS SCP e Remote AE Title e Remote IP Address e Listening TCP IP Port Number Chapter 3 Network Conformance Statement 57 Optima IGS 320 Optima IGS 330 Conformance Statement of DICOM Direction 5537565 1 8EN Revision 7 7 Support of Extended Character Sets 52 The Optima system generates only a single byte character set ISO IR 100 Latin alphabet Number 1 supplementary set The product user interface will allow the user to enter characters from the console keyboard that are within ISO_IR 100 Latin alphabet Number 1 supplementary set As a Modality Worklist SCU the product will accept the worklist responses only if it satisfies the following e Attribute Specific Character Set 0008 0005 is not present e Attribute Specific Character Set 0008 0005 has only a single value and the value is either ISO_IR 100 or ISO_IR 6 e Attribute Specific Character Set 0008 0005 has more than one value and the first value is either not present or ISO_IR 100 or ISO_IR 6 The product will reject the worklist responses that do not satisfy the conditions listed above Text attributes of the Scheduled Procedure Step Ide
164. tion to Isocenter table head tilt angle Table Head Tilt Angle precision table cradle angle SID vector SOD vector 0019 xxAA 0019 xxEA 0019 xxEB 0019 xxEC 0019 xxED 0019 xxEE 0019 xxEF 0019 xxBC 0019 xxBE 0019 xxE9 lt A mn E mn rc mn r mn rc mn rc mn E lt zx 1 zZ zx 1 Zz Attribute Description and Use Horizontal and vertical image sweep per formed by the acquisition system before sending the DICOM image Defined terms are YES and NO Indicates the possibility to downscan the pixel data to 512x512 for exchange pur poses Enumerated values YES NO Rotation of the table in the horizontal plane in degrees Zero is defined when the head feet axis of the table is aligned with the CRA CAU axis of the Isocenter Z Positive angles are clockwise when looking at the table from upwards The valid range is from 180 to 180 Contains the value of the first frame X position of the Table Reference Point with respect to the Isocenter mm Posi tive values are towards the LAO direction of the Isocenter The value of this attribute applies to the first frame of the Multi frame image Y position of the Table Reference Point with respect to the Isocenter mm posi tive values are downwards the horizontal plane in the vertical direction The value of this attribute applies to the first frame of the Multi frame image Z position of t
165. u YNbTBAaHeTO 3a pabora Hecna3BaHeTo Ha TOBA npeaynpexaeHne moxe fa AoBeae A0 HapaHaBaHe Ha AOocTaBWukKa Ha ycnyrata onepatTopa nnn nayneHTa B pe3ysITaT Ha TOKOB yap MexaHMMHa nnn npyra ONAaCHOCT SS RR IE TREER RA ZH CN e MRAP WARS ARS SEXES RR MEP E ATRAS o e AREAS MIK FM BY TEETE e ARREA TREO AE RAS AR RPA D SUECEDR BR WIG SE RAME RY i Bo LA AN ARES FE fe DER SCRA ZH HK MET PORE RRS SESCH HRS ERASE e PRADOS FAMA ARANA SAUDE MEI ER e TERRESTRE WARE BID LS Mat RAN fe E uu Lei EE ee ZH TW TEE PS BS AME MEE RASO BEER ATRAS e TOM EIE IE NEER ERJE SOSA WE IS FR e AABSBABSA TERHAD St mme Mia A 0 8 m S2 Fo UPOZORENJE Ovaj servisni priru nik dostupan je na engleskom jeziku HR e Ako davatelj usluge klijenta treba neki drugi jezik klijent je du an osigurati prijevod e Ne poku avajte servisirati opremu ako niste u potpunosti pro itali i razumjeli ovaj servisni priru nik e Zanemarite li ovo upozorenje mo e do i do ozljede davatelja usluge operatera ili pacijenta uslijed strujnog udara mehani kih ili drugih rizika Important Information 3 VYSTRAHA CS ADVARSEL DA WAARSCHUWING NL WARNING EN HOIATUS ET Optima IGS 320 Optima IGS 330 Conformance Statement of DICOM Direction 5537565 1 8EN Revision 1 Tento provozni navod existuje pouze v anglick m jazyce e V p pad Ze extern slu ba z kazn k m pot ebuje n vod v jin m jazyce je zajiSt ni p
166. vedere direttamente alla traduzione Procedere alla manutenzione dell apparecchiatura solo dopo aver consultato il pre sente manuale ed averne compreso il contenuto Il mancato rispetto della presente avvertenza potrebbe causare lesioni all addetto al la manutenzione all operatore o ai pazienti provocate da scosse elettriche urti mec canici o altri rischi c09g EAXx Aa7 Jc XB U 7d V EA Y EACHAC NORAD REA RE BERE NORA BEA TOR BORBETTSENESUETULKEEET CONY EANIAS I2AmL BREST IC RBONU EASTDEWUC lt ES Wo COBAIHDEWBA VEAN RFBODUEZE CAM RESPCRMH VIET OMO ERIC KW ABTS RTRETEZ 5 amp d E AHA um ee 80121 01354 F UA LC TAO Mela ABAH 304 olele 21018 STE BS HA HUISE MB she 22 779 Mel IC ST apkopes rokasgr mata ir pieejama tikai ang u valoda Ja klienta apkopes sniedz jam nepiecie ama inform cija cit valod klienta pien kums ir nodro in t tulkojumu Neveiciet apr kojuma apkopi bez apkopes rokasgr matas izlas anas un sapra a nas br din juma neiev ro anas rezult t var rasties elektrisk s str vas trieciena me h nisku vai citu faktoru izrais tu traumu risks apkopes sniedz jam operatoram vai pacientam Important Information ISPEJIMAS LT ADVARSEL NO OSTRZEZENIE PL ATENCAO PT BR ATENCAO PT PT Important Information Optima IGS 320 Optima IGS 330 Conformance Statement of DICOM Direction 5537565 1 8EN Revision 1 Sis eksploatavimo vadovas yra tik
167. vice Basic Grayscale Print Management Service Object Pair SOP Instance An information object a specific occurrence of information exchanged in a SOP Class Examples a specific x ray image Tag A 32 bit identifier for a data element represented as a pair of four digit hexadecimal numbers the group and the element If the group number is odd the tag is for a private manufacturer specific data element Examples 0010 0020 Patient ID 07FE 0010 Pixel Data 0019 0210 private data element Transfer Syntax The encoding used for exchange of DICOM information objects and messages Examples JPEG compressed images little endian explicit value representation Unique Identifier UID A globally unique dotted decimal string that identifies a specific object or a class of objects an ISO 8824 Object Identifier Examples Study Instance UID SOP Class UID SOP Instance UID Value Representation VR The format type of an individual DICOM data element such as text an integer a person s name or a code DICOM information objects can be transmitted with either explicit identification of the type of each data element Explicit VR or without explicit identification Implicit VR with Implicit VR the receiving application must use a DICOM data dictionary to look up the format of each data element 1 9 Symbols and Abbreviations 28 AE Application Entity AET Application Entity Title DICOM
168. vision 1 3 IOD Module Table The Secondary Capture Information Object Definition comprises the modules of the following table plus Standard Extended and Private attributes Standard Extended and Private attributes are described in Section Standard Extended and Private Data Attributes Table 5 2 SC Image IOD Modules Entity Name Module Name Usage Patient Section 4 5 1 General Image Patient Used Module Clinical Trial Subject NotUsed o N Study Section 4 2 1 General Study General Study Used Module Section 4 2 2 Patient Study Patient Study Used Module Clinical Trial Study NotUsed N Series Section 4 3 Series Entity Mod General Series Used ules A A Equipment Section 4 4 1 General Equip General Equipment Used ment Module Section 4 4 2 SC Equipment SC Equipment Used Module A A A VOI LUT Section 4 5 4 VOI LUT module Section 4 5 5 SOP Common SOP Common Used Module N N N Image Section 4 5 1 General Image General Image Used Module Section 4 5 2 Image Pixel Image Pixel Used Module Section 4 5 3 SC Image Mod SC Image Used ule N N Chapter 5 SC Information Object Implementation 83 Optima IGS 320 Optima IGS 330 Conformance Statement of DICOM Direction 5537565 1 8EN Revision 1 4 Information Module Definitions Please refer to DICOM Standard Part 3 Information Object Definitions for a description of each of the entities and modules contained within the SC Information Object The f
169. y last_name restricted to 32 chars first name restricted to 31 chars When from work list equals first component group From worklist or user interface Restricted to 64 chars From user interface or worklist Restricted to 8 chars YYYYMMDD From user interface or worklist M F or O Other patient identifier or code From Worklist or User Inter face From Worklist Identifier of the Assigning Authority system organization agency or department that issued the Patient ID Patient ID 0010 0020 Patient s Birth Date 0010 0030 Patient s Sex 0010 0040 Other Patient ID 0010 1000 Issuer of Patient ID 0010 0021 From Worklist Universal or unique identifier for the Patient ID Assigning Authority The authority identified by this attrib ute shall be the same as that of Issuer of Patient ID 0010 0021 if present gt Universal Entity ID 0040 0032 gt Universal Entity ID Type 0040 0033 gt Identifier Type Code 0040 0035 Other Patient IDs Sequence 0010 1002 gt Patient ID 0010 0020 From Worklist An identification number or code used to identify the patient gt Issuer of Patient ID 0010 0021 From Worklist Identifier of the Assigning Authority system organization agency or department that issued the Patient ID From Worklist Standard defining the format of the Universal Entity ID 0040 0032 Required if Universal Entity ID 0040 0032 is present From Worklist Type of P
170. y to provide translation services e Do not attempt to service the equipment unless this service manual has been con sulted and is understood e Failure to heed this warning may result in injury to the service provider operator or patient from electric shock mechanical or other hazards See teenindusjuhend on saadaval ainult inglise keeles e Kui klienditeeninduse osutaja n uab juhendit inglise keelest erinevas keeles vastu tab klient t lketeenuse osutamise eest e Arge ritage seadmeid teenindada enne eelnevalt k esoleva teenindusjuhendiga tutvumist ja sellest aru saamist e K esoleva hoiatuse eiramine v ib p hjustada teenuseosutaja operaatori v i pat siendi vigastamist elektril gi mehaanilise v i muu ohu tagaj rjel Important Information Optima IGS 320 Optima IGS 330 Conformance Statement of DICOM Direction 5537565 1 8EN Revision 1 VAROITUS Tama huolto ohje on saatavilla vain englanniksi Fl e Jos asiakkaan huoltohenkil st vaatii muuta kuin englanninkielista materiaalia tar vittavan k nn ksen hankkiminen on asiakkaan vastuulla e l yrit korjata laitteistoa ennen kuin olet varmasti lukenut ja ymm rt nyt t m n huolto ohjeen e Mik li t t varoitusta ei noudateta seurauksena voi olla huoltohenkil st n laitteis ton k ytt j n tai potilaan vahingoittuminen s hk iskun mekaanisen vian tai muun vaaratilanteen vuoksi ATTENTION Ce manuel d installation et de maintenance est disponi
171. ysician Name of the procedure Chapter 9 X ray Radiation Dose Structured Report 141 Information Object Implementation Optima IGS 320 Optima IGS 330 Conformance Statement of DICOM Direction 5537565 1 8EN Revision 7 NL Rel with Pa VT Concept Name VM Req Condition Value Set Constraint rent Type 2 HAS PROP CODE ERTIES 3 HAS PROP TEXT ERTIES 4 gt HAS PROP TEXT ERTIES 5 HAS PROP TEXT ERTIES gt HAS PROP CODE ERTIES 6 1 9 TID 1021 Device Participant Table 9 21 EV 113875 DCM Person Role in Procedure EV 113871 DCM Person ID EV 113872 DCM Person ID Issuer EV 113873 DCM Organ ization Name EV 113874 DCM Person Role in Organization Ara RE Ee Ee AAA MEINE SONNEN DIM Xe 113851 DOM Irradiation Administering NL Rel with Pa Concept Name Req Condition Value Set Constraint rent Type HAS PROP TEXT ERTIES HAS PROP TEXT ERTIES HAS PROP TEXT ERTIES HAS PROP TEXT ERTIES gt HAS PROP UIDREF ERTIES 6 2 Private Templates None 142 EV 113876 DCM De vice Role in Procedure EV 113877 DCM De vice Name EV 113878 DCM De vice Manufacturer EV 113879 DCM De vice Model Name EV 113880 DCM De vice Serial Number EV 121012 DCM De vice Observer UID 113859 DCM Irradiating Device Defaults to value of Station Nam
172. ystem will provide support for DICOM 3 0 to achieve interoperability across equipment produced by different vendors Table 1 1 provides an overview of the network services supported by Optima system Table 1 1 SOP Classes User of Service SCU Provider of Service SCP Transfer Secondary Capture Image Storage X Ray Angiographic Image Storage X Ray Radiation Dose SR Image Storage Workflow Management Option This means that this service can be purchased separately Chapter 1 Conformance Statement Overview 21 22 Optima IGS 320 Optima IGS 330 Conformance Statement of DICOM Direction 5537565 1 8EN Revision 1 This page left intentionally blank 1 Conformance Statement Overview Optima IGS 320 Optima IGS 330 Conformance Statement of DICOM Direction 5537565 1 8EN Revision 1 Chapter 2 Introduction 1 Introduction 1 1 Overview This DICOM Conformance Statement is divided into Chapters as described below Chapter 1 Conformance Statement Overview which describes the purpose of this Conformance Statement Chapter 2 Introduction which describes the overall structure intent and references for this Conformance Statement Chapter 3 Network Conformance Statement which specifies the GEMS equipment compliance to the DICOM requirements for the implementation of Networking features Chapter 4 X Ray Angiography Information Object Implementation which specifies the GEMS equipment compliance to DICOM requirements

Optima IGS 320, Optima IGS 330 Conformance

Contents

Download Pdf Manuals

Related Search

Related Contents