Home

Instructions for use Models 2082, 3082, 3082 K

1. 2082 3082 K Instructions for use OL K FR Models 2082 3082 3082 K Help Hyperlinks Hyperlinks are cross references in the text They are marked with the sym bol Entries in the table of contents also have hyperlink functionality e Clicking LI takes you to the relevant page Clicking in the Acrobat naviga tion bar takes you back to the start page Display table of contents Contents Full text search for a term Clicking opens the Search window You can search for any term in this Acrobat document or optionally search all of the Acrobat files stored on your computer or those that are accessible 2 of 88 Volker bed models 2082 3082 3082 K built after June 2009 Instructions for use G81 Other interactive functions The Adobe Reader and all Adobe Acrobat program versions offer the experienced user a whole raft of highly useful functions for interactive working with documents For more information see the relevant user manuals or online help Jump to Help page this page Help V1 2 11 04 2012 Version Imprint Type label Instructions for use G81 Type label Version 1 2 11 04 2012 for V lker bed models 2082 3082 3082 K V lker GmbH Wullener Feld 7958454 Witten Germany OL k F p built after June 2009 service voe ker de www voelker de i i N l NURSING BED Model 3082 AT by V lker GmbH 2009 2012 EE AN Input 230 V 50 Hz 300 VA pi as Volker GmbH
2. Instructions for use G81 V1 2 11 04 2012 l Appendix The Appendix section contains the technical specifications and classifica CONTENTS tions details on the service life and dis Symbols used amp 68 posal of the equipment and links to the manufacturer s declarations and forms Technical data LI 69 found in the appendix Classification 71 Type label tt 72 Service life disposal LL 74 Manufacturer s declarations forms electronic instructions for use LQ 75 Contents 67 of 88 Help Volker bed models 2082 3082 3082 K built after June 2009 Instructions for use G81 V1 2 11 04 2012 Appendix Symbols used N Warning symbols Information marked with this symbol must always A be read and strictly observed A Warning about the risk of crushing and entrap ment Note the information in the instructions for use g Gw A 250 kg Safe working load 250 kg A k Max permissible weight of the occupant patient A 220 kg approx 30 kg for the mattress trapeze bar and accessories Direct current Alternating current D Protection class II device protection insulated Contents 68 of 88 Type B device as per DIN EN 60601 1 The product satisfies the fundamental requirements of Appendix 1 of EU Directive 93 42 EEC The product must be disposed of in accordance with EU Directive 2002 96 EC pertaining to old electri cal and electronic equipment Help Volker bed models 2082 3082 3082
3. and approved legislation pursuant to this the generally acknowledged rules of technology and the stipulations of occupational safety and accident pro tection guidelines The bed must not be operated in a faulty state that could endanger its occupant patient care personnel or third parties User training The bed may only be operated by indi viduals whose training or understanding and experience offer surety for correct handling Medical Products Directive Contents User instruction The thorough induction of care person nel in the operation of the bed can be provided by Volker or its representative at the customer s request Attendance of such training can be certi fied and confirmed by Volker using the form provided for this purpose specify ing the name date and signature Occupants patients must be instructed in the use of the bed before care per sonnel hand over the hand control to them Other requirements Whoever is in charge of the activation operation or preparation of the bed must have been given a copy of these instructions for use in printed or elec tronic form and have read them To avoid operating errors and to safe guard the smooth operation of the bed care personnel must always have ac cess to the safety notes below 11 of 88 Volker bed models 2082 3082 3082 K built after June 2009 Instructions for use G81 Flooring requirements Increasingly overweight patients and occupa
4. V1 2 11 04 2012 Table 204 Guidelines and manufacturer s declaration Electromagnetic compatibility for all devices and systems that are not life sustaining 6 8 3 201 b The bed is intended for use in the electromagnetic environment as described below The customer or user of the bed should ensure that it is used in such an environment Compatibility IEC 60601 Testing Conformity Electromagnetic environment guideline check level level Portable and mobile radio equipment should not be used any closer to the bed or its cables than the recommended protective distance which is calculated based on the equation applicable for the transmission frequency Recommended protective distance Conducted HF 3 Vrms d 1 17 VP disturbances 150 kHz to 80 MHz d 1 17YP 80 MHz to 800 MHz IEC 61000 4 6 d 2 33VP 800 MHz to 2 5 GHz Continued on next page Contents 80 of 88 Help Volker bed models 2082 3082 3082 K built after June 2009 Instructions for use G81 V1 2 11 04 2012 Compatibility IEC 60601 Testing Conformity Electromagnetic environment guideline check level level Radiated HF 3 V m Where P is the rated output of the transmitter in disturbances 80 MHz to 2 5 GHz Watts W as specified by the transmitter manu facturer and d is the recommended protective IEC 61000 4 3 distance in metres m The field strength of stationary radio transmitters should be less than the conformity level at all frequencies as
5. ing bed linen max 15 kg or as an additional supporting surface for care related positions such as Bobath treatments or for the delivery of physiotherapy related treatments Contents 43 of 88 Help Volker bed models 2082 3082 3082 K built after June 2009 Instructions for use G81 V1 2 11 04 2012 Operation Back section The back lying surface can be adjusted using the hand control or the nurse keypad option If necessary disable the hand control lock 38 The back section of the lying surface can be raised up to an angle of max 70 A WARNING When the back section is be ing raised with the side rails up it must be ensured that none of the occupant s patient s or any other person s body parts are sticking out through the side rails or are on top of them Contents Back section up down o OC o o Hand control A WARNING Risk of entrap ment When adjusting the position of the back section do not touch the frame in the area of the back section 44 of 88 Volker bed models 2082 3082 3082 K built after June 2009 Instructions for use G81 Back section up down ec Nurse keypad option O Help V1 2 11 04 2012 Operation Mechanical rapid lowering of the back section CPR function option The bed can optionally be fitted with a mechanical rapid lowering function of the back section for resuscitation WARNING The CPR function Cardiopulmonary Resuscit
6. list dated 01 01 2008 can be used in their specified concentrations in Germa ny They must be applied at the dilution ratio specified by the relevant manufac Contents turer s instructions for use The list can be obtained under ISBN Number 978 3 88681 089 5 NOTE Solvents are not permitted Scouring agents abrasive sponges or other blunting agents must not be used Organic solvents such as halo genated aromatised hydrocar bons and ketones must not be used The following instructions must be noted when using cleaning and disinfecting agents The working solutions should gener ally be freshly prepared The concentrations used should be neither higher nor lower than those given in the list The so called shot method should not be used under any circumstances Under no circum stances should someone using a dis infectant follow their own judgement 52 of 88 Volker bed models 2082 3082 3082 K built after June 2009 Instructions for use G81 to add a detergent such as a soap or detergent substance leads to soap failure There is a risk of fire or explosion from alcoholic spray disinfectants when these are used over large ar eas They must not contain any corrosive or irritant components They must not contain any substanc es that change the surface structure or gripping properties of the materials Lubricants must not be affected The pH value of the water must be no higher or lower
7. 56 Contents 54 of 88 Help Volker bed models 2082 3082 3082 K built after June 2009 Instructions for use G81 V1 2 11 04 2012 I Maintenance Staff training safety notes Staff training Every person involved with maintenance or servicing must at least have been instructed in the use of the service tools by Volker e have read the safety notes and e the service manual and be qualified in accordance with MPBetreibV 4 and 6 To avoid errors and ensure that our beds work properly these documents must always be ac cessible to service personnel Before commencing maintenance work the service manual and the instruc tions for use must be read in full by the person responsible for carrying out the servicing Contents Safety notes During maintenance and technical checks the following specifications must be strictly observed The room s electrical installa tions must satisfy current technical requirements and the bed must be used correctly The castors must be placed in the brake position The beds are not protected against explosion and must therefore only be maintained in an environment free from flammable substances and materials A WARNING Before carrying out any maintenance work always disconnect the mains plug and disconnect the battery pack from the mains by pressing the green button on the engine housing A WARNING Maintenance and repair work should only be car ried o
8. Bunsix yi syuawaj Buuds pue Hum avens BuT i We o lq lieA e asn 104 suojonsjsu jqepe IA p uo UONdUOSU uono dsul jensiIA ejqeandde paydeooe JON JON paydeoay Ajenuy payday aq o jueuodwoj UB DIUYI9 JO BEN yaay Jo puly 0949 Jo ayeq Cou al JayJO A JO UONBOUNUBPI umo s y oey G a yoneoynuop peg p q y JO uolle5o jonpoid paq jo edAj wou Jewojsno sseuppe 109 01d pounbous s juouoinseou joui suonejn6au Ajajes pue spiepue s ueuayn o BDUePJOIIe UI SPaq J1BIUJJBSY pue JGHASOU JOyJOA JO YOOYD LDLIUYIAL 83 of 88 Contents V1 2 11 04 2012 Volker bed models 2082 3082 3082 K built after June 2009 Instructions for use G81 Spare part order Page of Volker GmbH Service Address Wullener Feld 79 K 58454 Witten Germany Name of the ordering party ie ee ae ane Street address E Mail service voelker de Zip code city country Shipping address if different from the billing address Telephone number Stamp Address Customer number Customer order number Attention of Purchase order date Street address Signature Zip code city country Please to fill in the form use block letters Please fill out all the information carefully and complete the form in its entirety otherwise we may have problems in delivering and processing this order MODEL SERIAL NO YEAR OF MANUFACTURE SPARE PART DESCRIPTION Bed type Ident
9. Degree of protection of the applied part against electric shock as per DIN EN 60601 1 Type B e A Degree of protection against explosive substanc es and mixtures The bed is not protected against explosion and should not be used in an environ ment in which flammable anaesthetics or flammable cleaning agents are present see brochure from accident prevention organisation ZH 1 200 MPG grouping Class Contents 71 of 88 Volker bed models 2082 3082 3082 K built after June 2009 Instructions for use G81 Help V1 2 11 04 2012 j Appendix Type label 1 2 Type specifications V lker GmbH Wullener Feld 74 58454 Witten Germany Phone 49 2302 96096 0 Faxdgg 2302 96096 16 service voelker de www volgker ce ID No 3082 2012 13 263 D i Input 230 V 50 Hz 300 VA Physical life time 4 min 10 min Unsuitable for automatic washing system C Leakage current 7 pA 4 x BJ Made in Germany _ A A o Re mask kan Next technical control Degree of protection IPX 4 13 2013 The type label is located on the inside of the head panel Raise the back section to read the type label Contents Volker bed models 2082 3082 3082 K built after June 2009 Instructions for use G81 1st line 2nd line 3rd line 4th line 5th line 6th line 72 of 88 Model designation In the example NURSING BED model 3082 ID No made up
10. Volker bed models 2082 3082 3082 K built after June 2009 Instructions for use G81 Taking out of service The bed is taken out of service by dis connecting it from the mains supply To do this the mains plug is disconnected from the mains socket If the bed is to be out of service for a period longer than two weeks then the reset button on the engine housing must also be pressed to disconnect the battery pack from the mains The reset button must also be pressed when repairs are carried out on the system p gt Reset button Kma Help V1 2 11 04 2012 I Activation Functional check Visual inspection Before each new occupancy of the bed the following checks must be carried out 1 Ensure the bed exhibits no visible signs of damage 2 Ensure that the insulation of the electrical cables is intact 3 Ensure that the next testing date has not been missed see testing label WARNING Only undamaged beds that are still within their test ing interval periods may be used Contents Functional check A functional check must be carried out before each new occupancy 1 All electrical functions must be actu ated to their terminal positions once 2 The function of all side rails must be checked 3 The braking function of the bed must be checked Once a fault free functional check has been carried out the bed is ready for use 36 of 88 Help Volker bed models 2082 3082 3082
11. activated Contents Hand control Hand control locked unlocked Key The key should be removed from the bed when it is not required 38 of 88 Help Volker bed models 2082 3082 3082 K built after June 2009 Instructions for use G81 V1 2 11 04 2012 Operation Castors To move the bed the castors integrated into the four feet of the bed must be lowered The lying surface must be in its lowest position before this can be done A CAUTION Risk of accident If the bed is not being trans ported the castors must always be raised since the bed may be required as a support for when the occupant patient stands up or lies down If the bed rolls away while the castors are down this can lead to a serious fall Once the castors have been raised it must be checked that the bed Is actually securely parked i e the castors are completely raised NOTE The bed is not suitable for transporting the occupant patient Contents Lowering the castors 1 Move the lying surface to its lowest e position by pressing the button 2 Press the button while holding the S button down until the lifting device automatically switches off The bed is now standing on its four cas tors and can thus be moved easily 39 of 88 Volker bed models 2082 3082 3082 K built after June 2009 Instructions for use G81 Raising the castors 1 Press the O button on the height adjustment control The castors
12. all functions must be locked Contents 14 of 88 Volker bed models 2082 3082 3082 K built after June 2009 Instructions for use G81 Help V1 2 11 04 2012 Notes General safety notes 4 5 Accessories WARNING Risk of injury Only original Volker accessories should be used Third party ac cessories must be subjected to testing before use Use of lifting devices WARNING Risk of injury No lifting device must be fas tened directly to the bed patient transport repair The lifting devices specified are appli ances that can be attached to the bed for transport purposes Patient lifters can be used Contents Use of oxygen equipment DANGER Risk of fire Do not use any oxygen equip ment other than that which is administered via nasal prongs or masks Do not use this bed in a room where there is a risk of explosion Provided it has been excluded e g based on information in the instructions for use of the equip ment being used that the use of the equipment may cause the O concentration to rise to such a degree that there is an explosion risk then the equipment can be used Rail spacer When using the rail spacer please read the separate instructions for use for this accessory During technical checks the rail spacers should also be checked to ensure they are suitable for the size of side rail used 15 of 88 Volker bed models 2082 3082 3082 K built after June 2009 Instruct
13. and or floor Help V1 2 11 04 2012 Functional description Nurse keypad with individual tock option 3 3 e e e 6 11 8 12 B 13 15 m 6 e 6 G 17 NY me ON 16 18 19 1 Anti Trendelenburg positioning 11 Lock lying surface lift and anti Trendelenburg 2 Trendelenburg positioning positioning 3 Lying surface up 12 Lock back section 4 Lying surface down 13 Lock upper leg section 5 Back section up 14 Lock hand control 6 Back section down 15 Lock automatic function 7 Upper leg section up 16 Lower the castors 4 8 Upper leg section down 17 Mains voltage display 9 Cardiac chair position 18 Battery display 10 Auto Contour 19 On Switch Contents 24 of 88 Volker bed models 2082 3082 3082 K built after June 2009 Instructions for use G81 Head end raised 2 Head end lowered Back and upper leg section raised simultane ously 4 Press both buttons simultaneously the lying surface moves to the lowest position and the castors lower green mains voltage is on 6 green gt 80 charged yellow 30 80 charged red discharged flashing charging after pressing the button the keypad is available for up to 120 sec after the last action then it locks automatically 8 automatic function with double click possible on a country by country basis WARNING When actuating mo torised adjustments with the side rails raised it must be ensured that the occupant patient does n
14. carried out Contents rIOC tO DE Calrled OL Annually and after Technical check 57 lengthy periods of non use As required Lubricate mechanical parts Replace parts subject to wear see service manual Every 3 5 years Replace the battery pack 56 of 88 Help Volker bed models 2082 3082 3082 K built after June 2009 Instructions for use G81 V1 2 11 04 2012 I Technical check CONTENTS The section entitled Technical check con Visual inspection EI 58 tains all the information needed to carry out the technical check in accordance with Functional check of the side rails Ga 58 MPBetreibV BGVA3 UVV on hospital f and care beds and measurement as per Functional check of the brakes Li 60 DIN EN 62353 VDE 0751 1 Other e g Functional check of the motors LJ 60 country specific specifications have not been included here This does not absolve Mains connection cable LI 60 the operator from the obligation to observe any such specifications Cabling Er 60 lt lt gt i Housing amp 60 Mechanical check 60 Measuring in accordance with DIN EN 62353 VDE 0751 1 61 Checking the trapeze bar grab handle 61 Further accessories 61 An Hi L O LL A gt p k Contents 57 of 88 Help Volker bed models 2082 3082 3082 K built after June 2009 Instructions for use G81 V1 2 11 04 2012 Technical check 1 4 1 Visual inspection Check the frame parts for plastic d
15. retract into the pillars of the lower frame so that the bed stands firmly on four floor protection caps Help V1 2 11 04 2012 I Operation Side rails General safety notes A WARNING All people whose duties involve manoeuvring of the side rails must have read and under stood the following information e During actuation of the back upper leg or lower leg section adjustment of the lift or of the side rails it must always be en sured that the occupant patient is not touching the side rails and that no part of his her body is sticking out through the side rails lf the side rails are used for an individual whose psychologi cal condition necessitates their use it must be ensured that the hand control is stored com pletely out of his her reach or its functions are completely locked In all cases care must be taken to ensure that entrapment risks are minimized Contents Volker bed models 2082 3082 3082 K built after June 2009 Instructions for use G81 Protective covers cot side pads are available as an ac cessory for the side rails These provide additional protection against injury from contact with the side rails The use of these protective covers is recommended for all persons for whom the risk of injury from unavoidable contact with the side rails is very high Even with the covers the care staff or oc cupant patient must still take the necessary care when operating the bed If
16. the side rail ele ments when the electrical lying surface adjustment mecha nism is actuated It is also important to ensure that no part of the body is sticking out through the side rails lf the side rails are used with a person whose psychologi cal condition makes their use necessary then it must be ensured that the hand control is kept out of their reach or its functions are locked In addition it is strongly recom mended that side rail covers are used A A A DANGER If these safety meas ures are not observed by care personnel injuries can be caused to hands knees fingers feet legs and hips along with hae matomas and other injuries as a result of entrapment In children or people who are less than 146 cm tall non observance of these guidelines can lead to death WARNING Risk of entrapment On model 2082 the side rails must either be fully raised and securely locked in position or be completely lowered WARNING Danger of injury If the side rails are damaged the bed must not be used and must be repaired Height adjustment A DANGER Risk of entrapment between the lower frame andlor floor and the bed frame when the bed is lowered It must be ensured that no people limbs pets bed linen or other objects are caught between the bed frame and the lower frame and or floor DANGER Danger of move ment If any movement of the bed could represent a danger to the occu pant patient
17. the side rails are used they must always be either com pletely raised and securely engaged or completely low ered to the end stop Because of the risk of entrapment they must never be left in a position where they are not completely engaged If the side rails are damaged there is a risk that the patient will fall out of bed 40 of 88 Help V1 2 11 04 2012 Operation Side rails Model 2082 Raising the side rails To raise the side rails take hold of the grip recess and lift it first at the head end and then at the foot end until the rail audibly engages Securing buttons external s E h ak a e lad ep g enf tosts enp tHe a Contents Volker bed models 2082 3082 3082 K built after June 2009 Lowering the side rails Starting at the foot end take hold of the recess grip and lift the top rail slightly Press the button on the side and allow the side rail to lower Repeat at the head end A WARNING Risk of entrap ment On model 2082 the side rails must be either completely raised and securely engaged or be in the fully lowered position For safety reasons the side rails cannot be released when there is pressure be ing exerted on them from above 41 of 88 Instructions for use G81 All side rails down the bed is accessi ble without restriction from both sides All side rails up the occupant patient enjoys maximum protection from rolling out of bed Help V
18. 1 2 11 04 2012 operation Side rails Models 3082 3082 K 1 2 Raising the side rails 2 Press the trigger labelled Dr cken Press at the lower edge of the side rail element and tilt it sideways into the horizontal plane so that it lies parallel to the floor 1 Pull the side rail element out hori zontally until the end stop and fold it upwards 2 To adjust the height of the side rail pull the telescopic section upwards until it reaches its end stop The side rail elements can be used indi vidually or together as required to protect Lowering the side rails the occupant patient Raising all four rail elements offers the occupant patient maximum protection 1 Press both buttons on the outside of the frame right under the cross member to bring the height adjust able side rail element to its lowest w A WARNING The side rails should position always be gripped with two hands at the ends of the element in 3 Push the rail element completely question and guided upwards or underneath the lying surface downwards A CAUTION Any weight on side rail elements that are pulled out hori zontally must not exceed 15 kq Contents 42 of 88 Help Volker bed models 2082 3082 3082 K built after June 2009 Instructions for use G81 V1 2 11 04 2012 Operation Side rails Models 3082 3082 K 2 2 NOTE Due to their exceptional stability the side rail elements can also be used as a surface for stor
19. 3082 3082 K built after June 2009 Instructions for use G81 V1 2 11 04 2012 j Functional description The features of the V lker care bed and its function are set out in the sec CONTENTS tion Functional description Overview 18 Model 2082 18 Models 3082 3082 K 19 Hand control with hook EL 20 Transverse hand control option for 3082 3082 K 21 Nurse keypad option 22 with complete lock option LI 23 with individual lock option Ej 24 Trapeze bar and accessory holders accessory rail Q 25 Versions and options H 26 Accessories 28 Contents 17 of 88 Help Volker bed models 2082 3082 3082 K built after June 2009 Instructions for use G81 V1 2 11 04 2012 Functional description Overview of model 2082 Hand control End to end pull up side rail not shown both sides Foot section 4 column height e adjustment Lowerable castors integrated into all four feet Contents V lker bed models 2082 3082 Head section Holders for trapeze bar drip stands etc on both sides Adjustable back section Seat section fixed Accessory rail for holding ac cessories urine bottle basket universal hook etc on both sides Adjustable Adjustable Nurse keypad lower leg section upper leg section optional not shown 18 of 88 Help 3082 K built after June 2009 Instructions for use G81 V1 2 11 04 2012 Functional description Overview of models 3082 3082 K Adjusta
20. AILS and the LYING SURFACE G Total length of the SIDE RAIL or sum of the length of the divided gt Gx 21 2 the length of SIDE RAILS on one side of the BED the LYING SURFACE 58 of 88 Help Volker bed models 2082 3082 3082 K built after June 2009 Instructions for use G81 V1 2 11 04 2012 Technical check 2 4 placed under load All measurements of side rail distances must be carried out in the flat lying surface position The measurement of A must be per formed using a cone as defined in DIN EN 60601 2 38 The force used for measurement A must be at least 50 N Inspection in accordance with IEC FDIS 60601 2 52 Check that the locking mechanism for the side rails is working correctly and that there are no visible deformations or signs of wear and tear on the side rails Check that the prescribed distances are maintained even when the side rails are placed under load All measurements of the side rail distances should be made in the flat lying surface position since the dimensions given while the bed is otherwise positioned do not show less favourable conditions The measurement of A and D must be performed using a cone as defined in IEC FDIS 60601 2 52 The force used for measurement A must be at least 250 N Contents N 6 Let Rai OU 8 RigniRai Letter Description Dimension A The distance between elements within the scope of the SIDE 120 mm RAIL in its raised engaged positi
21. BIOUBD X Ff 10OUOI 104 YOOYD S uollisod pu y Bulyoeas u uA yo Yojms JOJOLW ay SBOP SOYIJIMS pu pue sioJoui JO uol j9unj YIOYD IN UVONEUWOJOP 10 YOOYD 4 BBewepP 104 YOOYD 8 sipe om Alana paJejdal aq OL ZV SWAajsAs Bulysem p q ayewojne u Bulup o 10 JH YUM H 10 SIBOA Z Kiana apow BOSOU ul 4Y UJIA H 104 SIBOA Alene apow woy Bulsinu u 44 UOnounj J01 YIM H 4104 pue H Sejpuey 104 sieak Asana paJejdal aq OL V uono dsul seine JXON ugpjuyoa JO aunyeubIS UuOnJBdsSU au Jo 1JIns i efOL N S Jueunusui GuunseoN Gunsixe yi 9ez9 NI NIG 0 gouepJOJIJEB UI WYO Z 0 gt eouepaodwi uonezijenba enuajog Bulojje jo sue uu Aq jueno oGeyeet SGEZI NA NIC 0 gouUep 00JE UI yr 00S jueweunseou SAN Ajuo Aueuwegy Joj jueAgjou Aje6er juouwogj snoeuejjeosiu uonoedsui jeuonouny juaweoer das uono dsul jeuonouny lo uoo puey sinu ped y sinu pue joujuoo puey YIM S AHDp JO uono dsui jeuonouny ajqeordde yi uondes SIdoo5s Guipnjou silel epis jo uono dsui jeuonouny T pt P A j 9 Gunsixe ji jemeup Bulppegq ebelo s Bulppeg Fen menn monn 9 Gunsixe ji uoisuajxe pag wW Gunsixe yi eq pue ejpuey Jeq ezedelj MA L96 S ML 096 S 1d ox j ewooji Ho YIM spaq Joj Ajuo Alayeq A 6 po po X spaq jeydsoy jo
22. K Can be pulled out up to 38 cm ver sion for 2082 continuously for model 2082 Measured from the top edge of the side rails to the lying surface without the mattress Contents 27 of 88 Help Volker bed models 2082 3082 3082 K built after June 2009 Instructions for use G81 V1 2 11 04 2012 I Functional description Accessories 1 2 To offer the greatest possible degree of flexibility Volker offers a wide range of easy to attach accessories The beds are equipped as standard with holder devices for accessories such as drip stands and trapeze bars Urine bot tle baskets universal hooks standard bars etc can be mounted on the ac cessory rails provided on both sides of the bed Further information about accessories can be found in our current informa tion brochure or on the Internet at www voelker de 1 Our staff will gladly provide you with more details on the accessories that are available for your bed model A WARNING Only original Volker accessories should be used Third party accessories must be subjected to testing before use Contents Mattresses 88 x 200 210 220 x 12 cm 98 x 200 210 220 x 12 cm To minimise the risk of injury only use mattresses with the dimensions and properties detailed above If you do not use Volker mattresses please contact a dealer in whom you have confidence A DANGER If mattresses are used that do not match these specifi cations there is a risk of s
23. K built after June 2009 Instructions for use G81 V1 2 11 04 2012 Appendix Technical data standard design 1 2 The details marked below with are dependent on the length width or model of the bed The values specified relate to model 3082 S External dimensions W x L for lying surface 90 x 200 cm approx 98 x 210 cm for lying surface 90 x 210 cm approx 98 x 219 cm for lying surface 90 x 220 cm approx 98 x 229 cm for lying surface 100 x 200 cm approx 109 x 210 cm for lying surface 100 x 210 cm approx 109 x 219 cm for lying surface 100 x 220 cm approx 109 x 229 cm Safe working load for the bed 250 kg As a result of the weight approx 30 kg of the mat tress trapeze bar and other accessories the maximum permissible weight of the occupant patient is 220 kg If another mattress is used or other accessories this value must be recalculated Clearance height approx 17 cm Height of the lower edge of ly approx 27 cm 67 cm ing surface frame min max Safe working load for the trapeze bar holder 75 kg Height of the upper edge of approx 40 cm 80 cm the lying surface min max Safe working load for drip stands 2 kg hook Height of upper edge of head approx 76 cm 116 cm and foot section min max Rolling castors 4 pcs Type K 100 2x1 Halver castors or Blickle castors Lying surface 4 part 90 x 200 210 220 cm 100
24. K built after June 2009 Instructions for use G81 V1 2 11 04 2012 I Operation The Operation section provides you with all the information required to oper ate the Volker bed Contents 37 of 88 Volker bed models 2082 3082 3082 K built after June 2009 Instructions for use G81 CONTENTS Key lock M 38 Central castor adjustment J 39 Side rails LI 40 General safety notes tz 40 Model 2082 LI 41 Models 3082 3082 K LI 42 Back section 44 Mechanical rapid lowering of the back section CPR function option LJ 45 Upper and lower leg sections LH 46 Lying surface height Li 47 Anti Trendelenburg and Trendelenburg positioning option LO 48 Comfort seating position option 49 Bed extension option H 50 Help V1 2 11 04 2012 Operation Key lock Activating the hand control key lock disables its functions completely The hand control can be locked either on the hand control itself or on the nurse keypad option The locking switch is located on the reverse of the hand control It is un locked and locked with the key open lock visible The hand control can also be locked with the button lock hand e control on the nurse keypad Y This lock only affects the hand control The nurse keypad must be switched on by pressing the on switch to operate the bed It locks automatically 120 sec after the last actuation If the bed functions cannot be actuated check whether the key lock is
25. Physical life time 4 min 10 min Wullener Feld 79 Unsuitable for automatic washing system C US i N 58454 Witten Leakage current 7 pA AN bad C a a Mext technical contro GERMANY Degree af ae IPX 4 13 2013 Made in Germany Tel 49 2302 96096 0 Ane SRi sae III Fax 49 2302 96096 16 e mail info voelker de Internet www voelker de The type label is located on the inside of All rights reserved Reproduction even the head panel in part is not permitted Raise the back section to read the type We reserve the right to make changes label to reflect technical advances For further information on the type label The contents of this document are sub see Appendix t 72 ject to change without prior notification Customers are advised to contact the responsible area sales manager before placing an order Contents 3 of 88 Help Volker bed models 2082 3082 3082 K built after June 2009 Instructions for use G81 V1 2 11 04 2012 Table of contents 1 2 Help Gj 2 Version Imprint Type label 3 Table of contents LI 4 Foreword LI 6 Notes Li 7 General information H 8 Designated purpose H 9 General regulations training instruction of users further requirements M 11 General safety notes Li 12 Functional description Li 17 Overview LJ 18 Model 2082 LJ 18 Models 3082 3082 K M 19 Hand control with hook Lt 20 Transverse hand control option for 3082 3082 K LI 21 Nurse keypad option LJ 22 with c
26. age Contents 78 of 88 Help Volker bed models 2082 3082 3082 K built after June 2009 Instructions for use G81 V1 2 11 04 2012 Compatibility check IEC 60601 Testing level COnormnnty Electromagnetic environment level guideline Voltage drops shortin lt 5 U terruptions and voltage gt 95 voltage peaks in fluctuations in the mains U voltage supply for 0 5 cycles IEC 61000 4 11 40 U 60 dip in U for 5 cycles 70 U 30 dip in U for 25 cycles lt 5 U gt 95 dip i in U_ for 5 sec Magnetic field at supply 3 A m frequency 50 60 Hz IEC 61000 4 8 Remark 1 U is the mains AC voltage before the testing level is applied Contents Volker bed models 2082 3082 3082 K built after June 2009 lt 5 U gt 95 voltage peaks in U_ for 0 5 cycles 40 U 60 dip in U for 5 cycles 70 U 30 dip in UT for 25 cycles lt 5 U 295 dip in U for 5 sec 79 of 88 Instructions for use G81 The quality of the voltage supply should be commensurate with a typical commer cial or hospital environment If the user requires continued function from the bed when interruptions in the power supply occur it is recommended that the bed is powered via an uninter ruptible power supply or a battery Magnetic fields at mains frequency should correspond to the typical values present in commercial and hospital envi ronments Help
27. as follows 3082 Model 2012 Year of construction 13 Production week calendar week 263 Consecutive number D Mains plug version e g D Germany Input mains voltage mains frequency consumed power Physical life time max uninterrupted on time of electric motor adjustment In the example 4 min 10 min In other words the bed may be operated with the electric motors for max 4 min utes within a 10 minute period protection against overheating Save working load accessories mattress and weight of occupant patient Suitability for automatic washing sys tems In the example unsuitable for automatic washing system Help V1 2 11 04 2012 I Appendix Type label 2 2 NURSING BED Model 3o82 ID No 3082 2012 13 263 D Input 230 V 50 Hz 300 VA Physical life time 4 min 10 min RECEDED Volker GmbH Wullener Feld 79 58454 Witten Germany Phone 49 2302 96096 0 Fax 149 2302 96096 1 16 service voelker de www voelker d es Next technical control Leakage Current 7 pA I ext technic Degree of protection IPX 4 Made in Germany A Casasia Rt maske III 13 2013 Measured values Barcode Contents Volker bed models 2082 3082 3082 K built after June 2009 1st line Equivalent unit current leakage in pA The specified initial measured values were measured in accord ance with EN 62353 VDE 0751 1 The barcode code 39 contains the numeric ID No 10 digi
28. ation function may only be operated by qualified personnel Hold the back section on the mattress holder or the corner of the back section for model 2082 and pull the red lever located at the left or right underneath the back section of the lying surface up wards to lower the back section rapidly The back section can now be moved quickly downwards The lowering pro cess can be interrupted by letting go of the red lever Contents A WARNING The back section must Red lever for mechanical rapid lowering of the back section for resuscitation always be held on the mattress holder or on the corner of the back section for model 2082 so that the back section is not low ered suddenly with the occupant patient 45 of 88 Help Volker bed models 2082 3082 3082 K built after June 2009 Instructions for use G81 V1 2 11 04 2012 Operation Upper and lower leg sections The position of the upper leg lying surface can be adjusted using the hand control or the nurse keypad option If necessary disable the hand control lock 38 The upper leg section of the lying surface can be raised up to an angle of max 45 The lower leg section can be moved manually to any position of maximum 45 by pulling on the mattress holder on the lying surface of model 2082 To lower the lower leg section the mattress holder or the lying surface on model 2082 is pulled and the section lifted to the end stop and then lower
29. battery pack is more than 80 charged Yellow The battery pack is 30 80 charged Red DANGER ZONE Battery pack is discharged Flashing The battery pack is being charged If the LED is red or yellow the battery pack needs to be recharged The battery pack is switched off shortly before deep discharging After the bed is connected to the mains supply press any button on the hand control to render it fully func Contents tional again The battery pack is charged when it is connected to the mains after every use or if the charge has fallen too low NOTE If the bed is stored for a long period without being connect ed to the mains supply the battery pack can discharge The degree of discharge depends on environ mental conditions To increase the stand by time it is recommended to activate the reset button on the housing when stor ing the bed to disconnect the bed from the mains The bed should not be stored for a period longer than 6 months with a fully charged battery pack without recharging it NOTE During the charging cycle the battery pack is connected to the mains supply and is therefore supplied with electricity 34 of 88 Volker bed models 2082 3082 3082 K built after June 2009 Instructions for use G81 The LED displays the battery pack s charging status Y during the charging cycle The current cut off is deactivated and current flows to the bed when the LED of the main
30. ble side rails Hand control Adjustable side rails for back for lower leg section transverse section both sides on both sides Head section Quick release model 3082 K see fig on right Holders for trapeze bars drip stands etc both Model 3082 K sides also at the foot on model 3082 K Foot section Quick release model 3082 K see fig on right ig on right Adjustable back section 4 column height adjustment Seat section fixed Lowerable castors integrated into all Accessories rail for holding ac four feet cessories urine bottle basket universal hook etc on both Adjustable Adjustable Nurse keypad sides lower leg section upper leg section optional not shown Contents 19 of 88 Help Volker bed models 2082 3082 3082 K built after June 2009 Instructions for use G81 V1 2 11 04 2012 I Functional description Hand control with hook Reverse Back section up Back section down Upper leg section up Upper leg section down Hand control locked Auto Contour optional Anti Trendelenburg positioning optional Lying surface up Lying surface down Hand control unlocked Lower the castors A WARNING When actuating motorised adjustments with the side rails raised it must be ensured that the occupant pa tient does not have any contact with the side rails and that Head end raised no parts of his or her body or those of other people are stick Back and u
31. brakes are designed for an angle of inclination of no more than ten degrees Any attempt to move the bed while it is in braked position 9 of 88 Volker bed models 2082 3082 3082 K built after June 2009 Instructions for use G81 Use of the bed to transport people Use of the bed for transport with a vehicle Overloading of the bed beyond the specified safe working load Help V1 2 11 04 2012 Notes Designated purpose 2 2 A CAUTION If in an emergency situation it is impossible to avoid putting children under the age of 12 or people who are less than 146 cm tall in the bed protective covers must be placed on the side rails This also applies to the use of the bed by weak or confused patients The use of the bed for children under the age of 8 is absolutely forbidden A WARNING The bed may not be placed right next to or stacked up with other equipment If operation near to or stacked up with other equipment is necessary it must be ensured that the operation of the bed is observed and correct use in this arrangement is checked Contents 10 of 88 Help Volker bed models 2082 3082 3082 K built after June 2009 Instructions for use G81 V1 2 11 04 2012 I Notes General regulations user training instruction further requirements General regulations The bed must only be operated and used in accordance with its designated purpose in line with the conditions of the Medical Products Directive MPG
32. ctions for use G81 V1 2 11 04 2012 Operation Bed extension option Models 3082 3082 K Model 3082 Model 3082 K The bed can be extended by 20 cm us To pull out the bed extension pull the To pull out the bed extension press ing a telescopic bed extension option two pins located on the underside of the the two lever buttons simultaneously bed extension simultaneously down downwards wards N mu ap ab as lt Contents 50 of 88 Help Volker bed models 2082 3082 3082 K built after June 2009 Instructions for use G81 V1 2 11 04 2012 Cleaning and disinfection This section contains details on the cleaning and disinfection of the bed CONTENTS Cleaning L 52 Wipe and spray disinfection L 52 Spray lances and automatic washing systems LL 53 Contents 51 of 88 Help Volker bed models 2082 3082 3082 K built after June 2009 Instructions for use G81 V1 2 11 04 2012 Cleaning and disinfection 1 2 In order to maintain consistent function ing the bed should be cleaned disin fected and tested as soon as possible following each use so that it can be reused immediately without risk Incor rect cleaning disinfection of the bed can cause danger Cleaning Depending on the degree of soiling we recommend cleaning the bed with a damp cloth or similar Wipe and spray disinfection For wipe and spray disinfection the disinfecting agents featured in the VAH Verbund fur angewandte Hygiene e V
33. d control Replace the hand control Replace nurse keypad option 6 Replace battery pack 7 Replace the power supply board 8 Green reset button on engine housing was pressed If the battery display on the nurse keypad option then lights up red briefly disconnect the mains plug mains isolation switch must be replaced Continued on next page Help Volker bed models 2082 3082 3082 K built after June 2009 Instructions for use G81 V1 2 11 04 2012 Troubleshooting Table of faults 3 3 1 Green button on the mains isolation switch 2 Green reset button on the engine housing Mains isolation switch d Reset button ia ya e uv 2 no n M Green button The mains isolation switch ensures that when no electrical function is being ac tuated there is no mains voltage to the bed Exception while the battery pack is being charged and when the nurse keypad option is activated This is shown by the LED in the mains voltage display Contents 65 of 88 Volker bed models 2082 3082 3082 K built after June 2009 Instructions for use G81 Help V1 2 11 04 2012 Troubleshooting Service points If necessary please seek assistance from the relevant contact at your near est Volker sales organisation You will receive all the information you need for comprehensive service promptly Contents 66 of 88 Help Volker bed models 2082 3082 3082 K built after June 2009
34. d models 2082 3082 3082 K built after June 2009 Instructions for use G81 V1 2 11 04 2012 Functional description Nurse keypad with complete tock option 2 3 o oo e x 6 5 11 NT ON 10 8 12 13 1 Anti Trendelenburg positioning 8 Upper leg section down 2 Trendelenburg positioning gt 9 Lock hand control 3 Lying surface up 10 Lower the castors 4 Lying surface down 11 Mains voltage display 5 Back section up 12 Battery display 6 Back section down 13 On Switch 7 Upper leg section up Contents 23 of 88 Volker bed models 2082 3082 3082 K built after June 2009 Instructions for use G81 Head end raised 2 Head end lowered 3 Press both buttons simultaneously the lying surface moves to the lowest position and the castors lower 4 green mains voltage is on 5 green gt 80 charged yellow 30 80 charged red discharged flashing charging 6 after pressing the button the keypad is available for up to 120 sec after the last action then it locks automatically automatic function with double click possible on a country by country basis WARNING When actuating mo torised adjustments with the side rails raised it must be ensured that the occupant patient does not have any contact with the side rails and that no parts of his or her body or those of other people are sticking through the side rails or are trapped between the lying surface and the lower frame
35. e formations and or wear and tear This includes the lower frame the lifting mechanism all parts of the lying surface back seat upper leg and lower leg sections wing and spring elements if present trapeze bar trapeze bar holder and castors 2 Functional check of the side rails The side rails must be checked in ac cordance with DIN EN 60601 2 38 or IEC FDIS 60601 2 52 Please see the declaration of conformity supplied with the bed for which of the two standards should be used Inspection in accordance with DIN EN 60601 2 38 Check that the locking mechanism for the side rails is working correctly and that there are no visible deformations or signs of wear and tear on the side rails Check that the prescribed distances are maintained even when the side rails are Contents cat rF Letter Description Dimension A The greatest distance between the elements within the scope lt 120 mm of the SIDE RAILS in a raised engaged position or the area formed by the SIDE RAILS and fixed parts of the BED Thickness of the mattress for CORRECT USE defined by the manufac turer oe of the upper edge of the SIDE RAILS over the mattress 2220 mm see B without compression Distance between the HEAD or FOOT SECTION and the SIDE lt 60 mm or 2235 mm RAIL Distance between the divided SIDE RAIL with the LYING SUR lt 60 mm or 2235 mm FACE in flat position Distance of all accessible openings between the SIDE R
36. e regulations reflecting the current state of technology Volker beds satisfy requirements in terms of safety and functionality They are tested in accordance with interna tional standards and bear the CE mark which documents the beds compliance with essential requirements for medical products Please read the general safety notes 12 Please also note with particular attention to any warranty claims the further notes on the following pages Contents Standard design The standard design of the bed can be supplied with various options A descrip tion of these options can be found in the section entitled Versions and options 26 Copyright protection These instructions for use may only be transferred to third parties with the writ ten consent of Volker GmbH All docu ments are protected under copyright 8 of 88 Volker bed models 2082 3082 3082 K built after June 2009 Instructions for use G81 Warranty and liability Volker GmbH is liable for any faults or failures not including further claims arising in the context of the warranty obligations detailed in the main agree ment Claims for compensation for whatever legal reason such claims may be raised will not be entertained We reserve the right to make techni cal modifications without notice as part of the further development of the beds which form the subject of these instruc tions for use All specifications are non binding Printing errors exce
37. ed The locking mechanism is disen gaged automatically Upper leg section up down Upper leg section up down o Oo e900 S OPS A WARNING When the upper or lower leg x e section is being raised with the side rails up it must be ensured that none of the Hand control Nurse keypad option occupant s patient s or any other person s body parts are sticking out through the A WARNING Risk of entrapment for 3082 3082 K side rails or are on top of them When the position of the upper leg section is being adjusted there is a risk of entrapment between the raised side rail and the foot section Contents 46 of 88 Help Volker bed models 2082 3082 3082 K built after June 2009 Instructions for use G81 V1 2 11 04 2012 Operation Lying surface height The position of the entire lying surface can be adjusted using the hand control or the nurse keypad option If necessary disable the hand control lock i 38 The lying surface height can be adjusted from 40 cm to 80 cm optionally from 35 to 70 cm A WARNING To avoid dangers to the oc cupant patient from falling we recommend that the bed be lowered all the way except when delivering care A DANGER Before lowering the bed it must be ensured that no people limbs pets bed linen or other objects are trapped between the lying surface and the lower frame or floor The bed s position must be stable castors raised when the patient is getti
38. g 6 8 3 201 b The bed is intended for operation in an electromagnetic environment in which HF disturbances are controlled The customer or user of the bed can help to avoid electromagnetic disturbances by respecting the minimum distance between portable and mobile HF telecommunications equipment transmitters and the bed The recommended minimum distance d is dependent on the maximum power output of the communication device see below Protective distance according to the frequency of the transmitter m Rate output of the transmitter 150 kHz to 80 MHz 80 MHz to 800 MHz 800 MHz to 2 5 GHz bi d 1 17 IP d 1 17 IP d 2 33 P For transmitters whose maximum rated output is not specified in the table above the recommended protective distance d in metres m can be calculated using the equation in the column that features P as the maximum power output of the transmit ter in Watts W as defined by the transmitter manufacturer Remark 1 At 80 MHz and 800 MHz the higher frequency range applies Remark 2 These guidelines may not be applicable in all cases The spread of electromagnetic parameters is influenced by the absorption and reflection of buildings objects and people Contents 82 of 88 Help Volker bed models 2082 3082 3082 K built after June 2009 Instructions for use G81 V1 2 11 04 2012 dda lA ep 19yjBLAD HJ JBS 2W 9 99 96 096 ZOET Gr XLA Z9 96 096 ZOET G uoyd j Auewsasyuanim rFSt8S 6 JO4JUOD UONOUNJ
39. gine hous ing If the battery display then lights up red briefly disconnect the mains plug Press the green button on the mains isolation switch after recon necting the mains plug to put the bed back into operation Never press both green buttons at the same time Contents NOTE The mains voltage is connected for the duration of the active time of the nurse keypad 120 sec so that the LED of the mains voltage display also lights up whenever the nurse keypad is active If the keypad switches over to the inactive state the mains power is switched off Double click function The nurse keypad can be equipped with an automatic function double click on a country by country basis With a double click on the Lying sur face up or Lying surface down button for example the lying surface moves to the highest or lowest position respec tively This function can be stopped at any time by pressing any button except the on switch 22 of 88 A WARNING Risk of entrapment If the double click function is being used the care giver must supervise the occupant patient until the adjustment procedure has completed A DANGER Risk of entrapment between the lower frame and or floor and the bed frame when the bed is being lowered It must be ensured that no people limbs pets bed linen or other objects are trapped between the bed frame and lower frame and or floor during adjustment manoeuvres Help Volker be
40. ifaction label inside of the bed head Contents 84 of 88 Help Volker bed models 2082 3082 3082 K built after June 2009 Instructions for use G81 V1 2 11 04 2012 Requirement for using the electronic instructions for use In order to open the electronic version of these operating instructions PDF file you must have Adobe Reader 7 0 5 or later or the corresponding Adobe Acrobat version installed on your PC Adobe Reader is available for nearly all operating systems The newest version can be obtained free of charge by download from www adobe de products acrobat reaadstep2 htmi The electronic version of these instructions for use may be found on the Internet at www voelker de Contents 85 of 88 Volker bed models 2082 3082 3082 K built after June 2009 Instructions for use G81 Help V1 2 11 04 2012 Trademarks Adobe Acrobat and Reader are protect ed or registered trademarks of Adobe Systems Incorporated Windows is a registered trademark of the Microsoft Corporation Contents 86 of 88 Help Volker bed models 2082 3082 3082 K built after June 2009 Instructions for use G81 V1 2 11 04 2012 Notices Contents 87 of 88 Help Volker bed models 2082 3082 3082 K built after June 2009 Instructions for use G81 V1 2 11 04 2012 VOLKER Volker GmbH Wullener Feld 79 58454 Witten Germany Telephone 49 2302 960 96 0 Fax 49 2302 960 96 16 www voelker de info voelker de
41. into the double drive has a charge capacity that is equivalent in theory to a constant operation of at least 4 lifting and lying surface adjustments with a working load of 250 kg NOTE lf the bed is parked at its location and the mains plug is not connected this will cause the battery pack to discharge due to the buffering of the electronic components Deep discharged battery packs can be damaged to the extent that premature replacement is needed To increase the stand by time it is recommended to activate the reset button on the housing when storing the bed and to disconnect the bed from the mains The bed should not be stored for a period longer than 6 months with a fully charged battery pack without recharging it 31 of 88 Volker bed models 2082 3082 3082 K built after June 2009 Instructions for use G81 Appropriate and correct use of the battery pack is essential for it to have a long service life In order to guarantee electrical func tionality at all times the bed should be connected to the mains as much as possible Safety cut out device The bed is equipped with an electri cal self resetting safety cut out device that prevents overloading of the motor systems In the event of very severe overloading the bed is automatically switched off Help V1 2 11 04 2012 Activation Preparation Conditions for set up The bed is only approved for use in dry rooms technical data sheet A main
42. ional description Versions and Options 1 2 The standard design of the bed can be supplied with various Jescription versions and options Nurse 1 Transverse on the side rail with clip Independent of the fastening option there are optional hand keypad option for 3082 3082 K control and nurse keypads with different function keys option Hand control 1 With hook standard versions 2 Transverse on the side rail with clip option for 3082 3082 K Contents 26 of 88 Help Volker bed models 2082 3082 3082 K built after June 2009 Instructions for use G81 V1 2 11 04 2012 I Functional description Versions and Options 2 2 EE These instructions for use cover all of the versions and op _Version optic FESCHIPUC tions listed Bed extension Models 3082 and 3082 K can be extended option by 20 cm with a telescopic bed extension Precise details of the supplied bed designs can be found in the order specifications for your beds If the original bed Side raile Models 2082 except design versions specification is no longer available please contact V lker Customer Services versions C and LP 3082 and 3082 K can be I equipped with various side rail versions Please make a note of the Volker serial number ID No on the type label m 72 before you call Back lower leg section 1 Can be pulled out up to 34 cm standard 2 Can be pulled out up to 40 cm ver sion for 3082 and 3082
43. ions for use G81 Cleaning and disinfection In order to maintain consistent function ing the bed should be cleaned disin fected and tested as soon as possible following each use so that it can be reused immediately without risk Incorrect cleaning disinfection 4 51 of the bed can cause danger Help V1 2 11 04 2012 Notes General safety notes 5 5 Maintenance and repair Anyone responsible for carrying out maintenance and repair work must at least have received instruction from Volker in the service tools have read the safety notes and the service manual and be qualified in accordance with MPBetreibV SS 4 and 6 After maintenance work or repairs have been carried out a Technical check 57 must be carried out on the affected parts and or functions During this check it must be determined that the bed can be used in accordance with the specifications without risk to occupants patients users or third parties The Technical check must be carried out at least once a year and after every lengthy period of non use Any discernible damage such as signs of wear and tear loose screws or breaks fractures must be eliminated immediately Contents Electromagnetic static interference The beds in model series 2082 3082 and 3082 K satisfy the EMC require ments in accordance with the law on medical products MPG The basis for testing is standard EN 60601 1 2 16 of 88 Help Volker bed models 2082
44. lief including kink protec tion sleeve the mains connection plug for damage 6 Cabling Check the cable guides and that the plug connectors are correctly seated and do not exhibit any damage Check the cables for damage 60 of 88 Volker bed models 2082 3082 3082 K built after June 2009 Instructions for use G81 7 Housing Check all housings for damage All screws must be firmly tightened and seals must not exhibit any visible dam age 8 Mechanical check Check the function of the Rastomat by manually moving the lower leg section to the individual positions Help V1 2 11 04 2012 Technical check 4 4 9 Measuring in accordance with DIN EN 62353 VDE 0751 1 The bed must be checked electrically in accordance with DIN EN 62353 VDE 0751 1 The leakage current should be measured by means of alternative measurement On beds with a potential cable connec tion see sketch below the impedance of the potential equalisation within the bed must also be measured 10 Trapeze bar grab handle Check whether the plastic and holding frame of the grab handle exhibit any damage and that the fixing rods on the trapeze bar are intact The handle of the trapeze bar including the fastening strap must be replaced in the following cycle Back rest Upper leg Lower leg Section section section i a I O Potential equalisation x connection 1 Lower f
45. ng in and out of the bed A WARNING When the height adjustment mechanism is actuated with the side rails up it must be ensured that the occupant patient does not have any contact with the side rails or that any parts of either the pa tient s body or of other persons are sticking through the side rails Contents Lying surface up down 9 Q oo 06 Hand control 47 of 88 Lying surface up down O O eoo Nurse keypad option Help Volker bed models 2082 3082 3082 K built after June 2009 i Instructions for use G81 V1 2 11 04 2012 Operation Anti Trendelenburg and Trendelenburg positioning option Trendelenburg positioning option can only be set using the nurse keypad option If necessary disable the hand control lock r 38 The Trendelenburg position can be adjusted up to an angle of 12 A CAUTION If a fault occurs with the lift ing function or the mains power supply fails and the battery pack is completely discharged the Trendelenburg function cannot be engaged The occupant pa tient may have to be placed in a different bed A WARNING Since the Trendelenburg po sitioning depends on clinical indications it must only be used with appropriate clinical approval The lying surface is automatically returned to its horizontal position if it is moved to its high est or lowest position Contents Anti Trendelenburg positioning ogoo Q1 00O Hana control
46. ns plug to the 3 Unlock the locking switch on the connection between the mains mains power socket reverse of the hand control using the cable and the lying surface 2 p in b 1 key open lock visible in order to ac Press the green button on the tivate the bed s electrical functions adjustment motor is correctly positioned A WARNING Check the mains cable for damage If the cable is damaged the bed must not be used and must be taken out of service immediately NOTE Please be aware that incorrect handling of the mains mains isolation switch for one sec ond to isolate the mains connection A F Open lock visible I e ae z SA ya isolation switch can lead to the battery pack no longer charging Incorrect handling can include Mains isolation with the dropping the mains isolation green mains isolation button switch pulling the mains plug cable to release it from the socket and driving over the ca ble when transporting the bed Contents 33 of 88 Help Volker bed models 2082 3082 3082 K built after June 2009 Instructions for use G81 V1 2 11 04 2012 I Activation Using the battery pack 1 2 The battery pack allows the bed to be operated independently of the mains supply for at least four adjustment cycles The battery status can be monitored by connecting a further nurse keypad with LEDs The LED of the battery display on the additional nurse keypad displays three colours Green The
47. nts have caused a consistent increase in demands on hospital and care beds in recent years Volker has addressed this topic by increasing the safe working load for the bed How ever not only the beds are exposed to higher levels of strain but also static and also flooring Therefore we recom mend that flooring in areas where the beds are used which is designed for this strain These are floor coverings classi fied as at least class 32 or 33 in accord ance with DIN EN 685 and properly laid These are floor coverings for areas intended for public and industrial use with moderate or heavy traffic Help V1 2 11 04 2012 Notes General safety notes 1 5 Warning symbols Information marked with this symbol must be read and its content strictly observed A DANGER represents an imme diate threat of danger that can cause serious physical injury or death A WARNING represents potentially dangerous situations that can lead to serious physical injury or death A CAUTION represents potentially dangerous situations that can cause slight physical injuries NOTE warns of potential damage to objects or property Contents Before first activation Before the bed is put into action for the first time care personnel must read these instructions for use in full and with care Before the bed is activated for the first time care personnel must be instructed in the handling of the bed using the in structions for use The p
48. nz sezjessbejyipondurzIpsy 80 vabunuapojuy ap puls pweg GONE 262 0909 NI NIG BGG bV 966b F b 10909 Na NIQ TIZOOZ Z L 10909 Na NIO LO 400Z 1 40909 N3 NIQ PUAMAGUE vawwoy U pu B oj SIP vapna 53 UNS SMI ZWEG SUMO Na Jap sbueyuy sap wabunyapJojuy uapuaBa puruB ap Gunuynjsny uayyoengab JU MJ A Ul SUN UOA J p u BPINPOJA uatauy lazaq puabjayypeu ap ssep Gyesaq Use L960 k agenswoyy HOME on assaupy Jap Jejun ejejss6un6qe4 Joule yw USN PSPES 64 Ped FUAM HOWE J NIDA apueuyszIsun Jag OMAIZPES IUINYZ4 NI IIA Guequy Bunie yi s e iuuoJuoy JJIWWOJUOD ap uonesepaq Awoyo Jo uongue o q Bunepuasyepuuojuoy Help 76 of 88 Volker bed models 2082 3082 3082 K built after June 2009 Instructions for use G81 Contents V1 2 11 04 2012 Table 201 Guidelines and manufacturer s declaration Electromagnetic compatibility 6 8 3 201 a 3 The bed is intended for use in the electromagnetic environment as described below The customer or user of the bed should ensure that it is used in such an environment Emissions measurements Conformity Electromagnetic environment guideline HF emissions Class A The bed is suitable for use in all institutions including residential IEC 61000 3 2 areas and such that are directly connected to a public mains sup ply network that also supplies buildings intended for residential Fluctuations in voltage Conforms purposes flicker IEC 61000 3 3 RF emissi
49. of 88 Help Volker bed models 2082 3082 3082 K built after June 2009 Instructions for use G81 V1 2 11 04 2012 juego 10pang BuiBeueyy seuynysypyasag UBLUDII UDI L002 60 G0 np JIVZPES ADA x exouUe osseo elg UIJ0JU02 159 Jinpod np voydeaues ET a Sa euowepuaj Sa3u85Ix3 x uug xIW2ID UI spnpord sa INS EGGL SO PL AP ASIDE RES GANIC sS auuaadoajn sapag SIN B SIN ZBE 5 THE S ZEE S SIA B SIA Zee oaea SIAC0OSIA M ZODE SIA B SIA Z80E W TEDE TROE Teog SESIEIIPYW SIN aoualajayaapoN sjnpoud sap uogeubisag ugsuqe aj Jed egsyojne vou sinpoul SOP LONESYIPOLW ap SED US p EAul 159 JI110 u02 ap WORE Sap ajan Saesnes SUI UOS 33 anbsew B ap podaj JUBWAOUOD xnelIpau snpoud 53 m 10 ej ap saquabima 47 o GPOMEZSTOB0B NI NIG 666 WV 9661 F F 10909 Nd NIQ ZIZOOZ Z L 0909 NI NIG Fa 002 L0909 NI NIQ SOnbiOde juos SIUBAINS spsepue s 87 FINZHEE Suusgdouns Apap E D 1 axeuue ap Sejeluowepuay souaf xne uoge nou va SRU efapou ej swep seuwojuoo juos snossep 49 sayioads snpoud saj anb auwwyuoo au Beui lluyu u uleH LO960 p BJENSWOUY HORUS I MIOA e Wogonpoud ap aps un poke oubewsln uaniM poras BZ Play Jan HOU SYON seubissnos E7 SIPEG Na BASU IIA x uuv PIWWOJUGS ap UONEIE I9q ae L008 60 010 AFZPEG anllan VI apuaddy sse a swojuo9 pnpoud siy yo uoIporulsu6a pue u isap ayy siuswannbal Jeg Ppapwaddy spn
50. omplete lock option EJ 23 with individual lock option L 24 Trapeze bar and accessory holders accessory rail LI 25 Versions and options H 26 Accessories L 28 Contents Activation 30 General operating instructions 31 Preparation ELI 32 Electrical activation Li 33 Using the battery pack LL 34 Taking out of service 35 Functional check ELI 36 Operation lz 37 Key lock M 38 Castors LI 39 Side rails LJ 40 General safety notes tz 40 Model 2082 LI 41 Models 3082 3082 K 42 Back section LU 44 Mech rapid lowering of the back section CPR function option Li 45 Upper and lower leg sections LI 46 Lying surface height Li 47 Anti Trendelenburg and Trendelenburg positioning option 48 Comfort seating position option LI 49 Bed extension option H 50 4 of 88 Volker bed models 2082 3082 3082 K built after June 2009 Instructions for use G81 Cleaning and disinfection M 51 Cleaning 52 Wipe and spray disinfection LJ 52 Spray lances and automatic washing systems LI 53 Maintenance L 54 Staff training H 55 Safety notes 55 Maintenance schedule L 56 Technical check l 57 Visual inspection LI 58 Functional check of the side rails GJ 58 Functional check of the brakes ELI 60 Functional check of the motors L 60 Mains connection cable 4 60 Cabling LJ 60 Housing 4 60 Mechanical check amp 60 Measuring in accordance with DIN EN 62353 VDE 0751 1 E 61 Checking
51. on or of the area formed by the SIDE RAILS and the fixed parts of the BED or ACCESSORIES B Cy 20 Cy QOC Axi D Not applicable O C Distance between HEAD SECTION and SIDE RAIL Distance between divided SIDE RAIL and distance between lt 60 mm or gt 318 mm SIDE RAIL and FOOT SECTION Area between SIDE RAIL and MATTRESS 120 mm cone may sink max 60 mm under the mattress surface without pressure G Height of the upper edge of the SIDE RAILS over the mattress gt 220 mm over at least 1 2 of the length of the LYING SURFACE 59 of 88 Help Volker bed models 2082 3082 3082 K built after June 2009 Instructions for use G81 V1 2 11 04 2012 Technical check 3 4 3 Functional check of the brakes Check the function of the brakes Raise and lower the castors 4 Functional check of the motors Travel through the full adjustment range of each motor Look out for any unusual noises watch the speed ease of running etc and check that the selected function travels in the correct direction Particularly ensure that the motor switches off automatically when it reaches its terminal position Please note that the terminal posi tion can vary from bed model to bed model Please consult the technical specifications for this or if in doubt contact our service department Contents 5 Mains connection cable Check the mains connection cable incl cable guides e the strain re
52. ons Conforms The bed is not suitable for connection to other equipment CISPR 14 1 Contents 77 of 88 Help Volker bed models 2082 3082 3082 K built after June 2009 Instructions for use G81 V1 2 11 04 2012 Guidelines and manufacturer s declaration Electromagnetic compatibility 6 8 3 201 a 6 The bed is intended for use in the electromagnetic environment as described below The customer or user of the bed should ensure that it is used in such an environment Compatibility check IEC 60601 Testing level Conformity Electromagnetic environment level guideline Discharge of static elec 6 kV contact discharge 6 kV contact discharge The ground should be made of wood or tricity ESD Ara q sas sa kad aledischara concrete and be laid with ceramic tiles 7 g 7 g If the ground is covered with synthetic IEC 61000 4 2 l i material the relative air humidity must be at least 30 Rapid transient electri 2 kV for 2 kV for voltage supply The quality of the voltage supply should cal disturbance voltage supply be commensurate with a typical commer bursts a i cial or hospital environment 1 kV for input and out IEC 61000 4 4 put cables Surge voltages 1 kV 1 kV series mode voltage The quality of the voltage supply should IEC 61000 4 5 series mode voltage be commensurate with a typical commer 2 kV cial or hospital environment la Not applicable common mode voltage Continued on next p
53. ot have any contact with the side rails and that no parts of his or her body or those of other people are sticking through the side rails or are trapped between the lying surface and the lower frame and or floor Help V1 2 11 04 2012 I Functional description Trapeze bar and accessory holders accessory rail On the inside of the head panel are holders for the trapeze bar and acces sories On model 3082 K there are two additional sockets for drip stands at the head and foot ends next to the protec tive wheels The trapeze bar and other accessories must be slotted into the holders until they audibly engage WARNING Risk of injury Ensure that the trapeze bar is completely slotted into the holder and securely seated Note the safe working load of the trapeze bar is max 75 kg A WARNING Risk of falling The trapeze bar must not be used by the occupant patient as an aid for climbing into the bed The trapeze bar must never jut out beyond the outer edge of the bed and then be used as a pulling up aid e g when getting out of a wheelchair Contents Trapeze bar holders Accessory holders e g for drip stands etc There is an accessory rail on either side of the bed to accommodate accessories Accessory rail e g for urine bottle basket universal hook etc 25 of 88 Help Volker bed models 2082 3082 3082 K built after June 2009 Instructions for use G81 V1 2 11 04 2012 I Funct
54. otential dangers that can arise despite correct operation of the bed must also be pointed out in full Before and during use Before each use of the bed the user must be sure that the bed is in a good safe condition and that safe use is en sured Functional check 36 12 of 88 Volker bed models 2082 3082 3082 K built after June 2009 Instructions for use G81 A WARNING If other equipment which has cables air pipes or the like is to be operated on the bed it must be ensured that these cables are routed so that they cannot become trapped in the movable parts of the beds and thus be damaged Position of the bed A CAUTION To avoid injuries caused by falling we recommend except while care is being given that the bed is generally set at its lowest position with the brake activated Help V1 2 11 04 2012 Notes General safety notes 2 5 Transporting the bed Securing the bed One sided load on the bed A CAUTION The bed is not de A CAUTION Risk of accident If A NOTE In order to prevent one signed for transporting people When moving the bed it must always be ensured that the mains connection cable does not touch the ground and that the lying sur face is in a horizontal position as low as possible The bed should only be moved on a solid floor Never attempt to push it over obstacles of over 1 cm in height The maximum angle of inclination of the floor must not exceed 10 the bed is not being
55. poud jeqipaw Buyaouco EGG SO FI JO DSWVEREG SMa SMI Na SIA E SIA ZOE S ERE S ERE S SIN E SIA Z80E 991199 SIA B SIA M ZB0E SIA E SIA Z80 yi zaot zaot z80z spag Guysiny ON apiay adAL sjanpoid Jo uonduasaq Janpejnuew ayi jo 19199 Be ayi MOUNA paepe ee sjnpoud ayi ji PIEAUI sewoJaq Awoyo jo WOyeJEpPap SIY Panny Agajayi ave esoudde jo joes 35 jo Keds ayi 0 uvueyad mej sonpud eapau ayi jo sjuawavinbau ay ZIOMIZ ZS 2 10808 NI NIG 6654 404866 kt 47140808 NI NIQ ZI A00Z 2 1 10908 NI NIQ LO 4002 4740908 NI NIQ padde ave sprepueys Guiwopoy ay OFAIZPES anag NI yo xipuaddy jo sUawannbel 21524 ayi paatu sanasina Aq payNqUISIP WHO ey u pue mojeg paquysap sipnpou ayi Jeyi swuyugg fueuuseyuayonurey poogt F JEJISUIOUV HOWE EA JE epis Guunoeynyeu e ypa keu A SPSS 64 pl auan HOQUWS Jason Aajeubis EI gazte apang NI IIA xipu ddy ALUOJUOS Jo uonesepeg 102 20 02 YENI LOE 60 S WOA SMAITHES aun Jap x Bueuuv qewob ssem Jap aIXnpou puis S YNPOLY aig uaburuapuoyuy apuabajpunsy Gueyuy ayynpouduizipayy 1900 EEE ET PL UO BMAYZAEB SUMEH Waua BIA E SIA ZRE S ERE S ZEZ S SIA E SIA ZODE Oaea SINES W ZBOE SESIA Z80E M ZO0t zeoe geog Veyaqabayq anpi Jap Bumnutjajazag Van ay Gunrepyesyenuojuoy asap payen sapnpou sap Gunuapuy veyjwwunsstqe J SJ H Wap WLU you Jaula lag inpe Gunuyopazuvay 33 Ue EuniGuuquy u
56. pper leg section raised simultaneously ing through the side rails or are trapped between the lying Press both buttons simultaneously rf d the f diora the lying surface moves to the lowest position and the castors lower Suriace an e lower rame and or toor Contents 20 of 88 Help Volker bed models 2082 3082 3082 K built after June 2009 Instructions for use G81 V1 2 11 04 2012 I Functional description Transverse hand control option for 3082 Reverse Hand control locked Hand control unlocked L lt a lt S q gt A WARNING When actuating motorised adjustments with the V l I l side rails raised it must be ensured that the occupant pa tient does not have any contact with the side rails and that 1 Press both buttons simultaneously no parts of his or her body or those of other people are stick the lying surface moves to the lowest position and the castors lower ing through the side rails or are trapped between the lying Back and upper leg section raised simultaneously surface and the lower frame and or floor Head end raised Contents 21 of 88 Help Volker bed models 2082 3082 3082 K built after June 2009 Instructions for use G81 V1 2 11 04 2012 I Functional description Nurse keypad option 1 3 NOTE Please note that to operate the bed the nurse keypad must be switched on by pressing the on switch If no electric function can be activated press the green reset button on the en
57. pted We accept no liability for damage and operational faults caused as a result of misuse and or non observance of these instructions for use The portrayal of the accessories does not necessarily match the actual prod uct Help V1 2 11 04 2012 Notes Designated purpose 1 2 Intended use Volker bed models 2082 3082 and 3082 K are beds for medical use and are intended for the laying down and care of occupants patients in care insti tutions hospitals and in suitable rooms in residential buildings The bed is intended for use by people over the age of 12 or who are taller than 146 cm The bed s safe working load is 250 kg The maximum permissible weight of the individual is derived by deducting the weight of the mattress the trapeze han dle and other accessories from this Any use of the Volker bed other than for the purpose intended excludes the company from any possible liability Contents None intended use None intended use can be dangerous This includes but is not limited to Incorrect actuation of electrical func tions and uncontrolled positioning Operation of the care bed by the occupant patient without having re ceived prior instruction in how to do SO Use of other electrical equipment on the bed Pulling on cables to move the bed Removing electrical plug connections by pulling on the cable Use of the bed on a slop of more than ten degrees of inclination the bed s
58. r June 2009 Instructions for use G81 Restraints may be fastened directly onto beds built after 08 2009 To do this fasten the restraints on the corresponding longitudinal section of the lying surface frame Make sure that the restraint is passed between the mattress holder and the mattress Wa Help V1 2 11 04 2012 Activation The section entitled Activation de scribes the preparation of the bed for CONTENTS use including the functional check General operating instructions 31 Preparation ELI 32 Electrical activation LJ 33 Using the battery pack EL 34 Taking out of service LI 35 Functional check 36 Contents 30 of 88 Help Volker bed models 2082 3082 3082 K built after June 2009 Instructions for use G81 V1 2 11 04 2012 i Activation General operating instructions On time The maximum on time for the electro motive bed functions is specified on the bed type label 72 or in the technical data sheet 4 min 10 min means that each electro motive adjustment may be operated for a maximum of 4 minutes in 10 minutes protection against overheating NOTE Should the maximum on time of 4 minutes be exceeded repeatedly or for longer periods safety cut out devices on the bed may cause the electromechani cal motor system to shut down The bed must not be manoeu vred using the motors until it has cooled down sufficiently Contents Battery pack The battery pack integrated
59. rame Contents a a 61 of 88 Volker bed models 2082 3082 3082 K built after June 2009 Instructions for use G81 Every 5 years handles and handles with roll function in nursing homes Every 3 years handles with roll function in hospitals 11 Further accessories Further accessories must always be checked in accordance with the manu facturer s instructions Help V1 2 11 04 2012 Troubleshooting The section entitled Troubleshoot ing contains a table of faults for users CONTENTS together with information on the service Table of faults r 63 points E o 1 a es Service points Lj 66 Contents 62 of 88 Help Volker bed models 2082 3082 3082 K built after June 2009 Instructions for use G81 V1 2 11 04 2012 Troubleshooting Table of faults 1 3 The following table contains information on possible functional problems that the users can resolve themselves Faults that can only be eliminated by technical engineers are described in the service manual Anyone responsible for carrying out maintenance and repair work must at least have received instruction from V lker in the service tools have read the safety notes and the service manual and be qualified in accordance with MPBetreibV SS 4 and 6 Contents NOTE Before carrying out any troubleshooting turn the nurse keypad on and ensure that the battery pack is charged observe the LED of the battery display on
60. s power supply and possibly a potential connector are required for operation of the bed in any suitable room When this is available and the building installation permits it the bed should always be connected to the potential equalisation Mechanical activation The supplied head and foot sections must be slotted into the corner connec tors on the bed frame only for model 3082 K Hand control connection The hand control should be connected to the socket provided where appropri ate The spiral cable must be routed so that it is not under tension Contents Volker bed models 2082 3082 3082 K built after June 2009 Instructions for use G81 A CAUTION The bed is not de signed for transporting people If a patient is lying in the bed it must only be pushed within the room The bed should only be moved on a solid floor Never at tempt to push it over obstacles of over 1 cm in height The maxi mum angle of inclination of the floor must not exceed 10 NOTE The bed must be transport ed by at least two people taking hold of the bed at the head and foot section Routing the hand control cable Bed transport The bed can be moved without auxiliary transportation devices To do this set the bed to transport mode lower the castors LI 39 Bed transport by at least two people Help 32 of 88 V1 2 11 04 2012 I Activation Electrical activation A WARNING Ensure that the plug 1 Connect the mai
61. s voltage display is green and the LED of the battery display flashes NOTE If the red LED lights up but the bed cannot be electrically adjusted press the mains isolation switch WARNING If electromagnetic interference occurs with other equipment in the area around the bed please refrain from using these devices The bed should always be han dled carefully during transport and protected from damp Help V1 2 11 04 2012 Activation Using the battery pack 2 2 and taking out of service NOTE The bed is designed for use in an ambient temperature range from 10 C to 40 C with a relative humidity of 30 to 40 and an air pressure of 00 to 1060 hPa WARNING The battery pack must only be replaced by personnel trained by Volker GmbH WARNING If the battery pack is faulty degassing can occur In rare cases this can cause deformation of the battery pack housing If this occurs the bed must be immediately taken out of service and taken to an ad equately ventilated room without sparks from electricity or fire Immediately inform customer services should this occur Contents A WARNING The battery pack must be disposed of in an envi ronmentally responsible manner using the appropriate services Alternatively you can return it to Volker GmbH for disposal To activate the hand control and the nurse keypad option once the bed has been activated the function key lock must be disabled 38 35 of 88
62. seye q eoujpoje Joj AJUo asesjau eiueYIBIN SIA B SIA Z8E S Z8Z S 08 S OLE S 08Z S uonisod BulJ s pue speq ejidsou Joj Ajuo Buluuni sou X paljdde oyeuq IeS1ueuo ui JO eSu op l ayesg A po xX Buysixe yi uonounj Ydo j j X ejejd yoddns yo1pAyzewo seI uono s Baj Jamo zueawzsnfpy 3 j X 06 lt uono s Ha 1 ddn 0 uono s yoeq uoneyuij B5uv Suonisod pu je yoeojdde peq si e si 10 Ajuo ju unsn pe y16uaj uonisod 61nqu pu i1 si A 1 uonisod Binqu W X pu u Jueunsnipe 1uBi u uono s baj jemoj Uonves Ha Jaddn uono s yoeg C j f gt suoiseqv r j po gt uoneuuuojoq A j TS 08 S 40 juo Buiyoo A 19S Yooyo UONEAS 9 MO7 H A po g ajqeordde yi uondas Jidodseja Guipnjou sjrev apis A po 8 Gunsixe yi jeoym Jeynq eM po po Spud 00 pue Pedy 19A0J pue SJOJOU SJ ASUEI ooo po j a saliosseooe jeuoppe 17u29 ie1 apis weoeds iB1 sISSEB seq z desl hn po j 9 ejqeo Buisnou jozuoo puey sinu ped y asinN e po po a ejqeo Guisnou jonuoo puey po po a s luo1 onuoo 10jou BuisnoH _ A j GWE p q SIA e SIA luo Buljqeo 1osu s pue ww Buioeds Buluonisog A j S g s6njd pullq s oe uoo ui 6nid ejqeo Gunoeuuoj Fen mn monn She yooy lqe2 uono loid pu q aAaljal UeWIS A j a uolo uuo2o HulBueyo ebJeyo Jo Gnjd ajqeo Ajddns semog po po 9 Jejdepe Jeq uoisnju depe Jeq ezodelj Fen a
63. t features that are of practical benefit to their users However as far as we know none of them offers the range of advantages that a Volker bed does 6 of 88 Volker bed models 2082 3082 3082 K built after June 2009 Instructions for use G81 Volker beds not only look great but they also offer functions that can be controlled or adjusted mechanically although most of them are controlled or adjusted using electric motors or elec tronic components If you purchase these beds the respon sibility for their correct and appropriate use is transferred to you Consequently we strongly advise that you consult the enclosed instructions for use to learn about the technical features handling and use of all the functions We wish you every success with Volker beds yours Volker GmbH Help V1 2 11 04 2012 Notes The Notes section contains information on the designated purpose of the prod CONTENTS uct as well as general safety notes General information Q1 8 Designated purpose H 9 General regulations training instruction of users further requirements M 11 General safety notes LJ 12 Contents 7 of 88 Help Volker bed models 2082 3082 3082 K built after June 2009 Instructions for use G81 V1 2 11 04 2012 Notes General information General notes You have purchased a bed from Volker GmbH This bed has been built in ac cordance with the applicable national and international standards and th
64. than 6 8 Water should not exceed a total water hardness of 0 9 mmol l up to 5 deg d Help V1 2 11 04 2012 Cleaning and disinfection 2 2 The specifications in the VAH list as A WARNING Risk of electric Spray lances and automatic washing well as the specifications we have shock fire and functional systems jann ee us Beek obine failure Cleaning and disinfection using spray ppg aon on e Ot ney Nn The bed must always be discon lances from high pressure cleaning a r and inves alone sere nected from the power supply equipment and in automatic bed wash ratios e g water hardness can ka during cleaning and disinfection ing systems is not permissible depending on the geographical loca tion It is therefore impossible to offer The plug and the socket of the legally binding assurance of certain hand control are only protected properties against spray when the control is l stowed and the appropriate cover If unsuitable washing and disinfect is in place ing agents are used if the mixing ratio is incorrect or if there is inad equate care of the beds damage can occur to the surface coating for which Volker GmbH is not liable Contents 53 of 88 Help Volker bed models 2082 3082 3082 K built after June 2009 Instructions for use G81 V1 2 11 04 2012 I Maintenance CONTENTS The Maintenance section contains E information on how to carry out mainte Staff training t 55 nance work Safety notes Gj 55 Maintenance schedule
65. the nurse keypad and that the bed is connected to the mains supply the mains plug is in a live socket WARNING Before carrying out any repair work ensure that the bed has been disconnected from the power supply and from the battery pack if present by press ing the reset button If the same fault occurs repeat edly use the diagnosis tool to read out the error memory before resetting the system again 63 of 88 Volker bed models 2082 3082 3082 K built after June 2009 Instructions for use G81 Help V1 2 11 04 2012 Troubleshooting Table of faults 2 3 The bed cannot be adjusted 1 The key lock is engaged electrically 2 The mains plug is not plugged in or there is no power to the socket and battery pack is discharged 3 Battery pack is disconnected 4 The hand control is faulty 5 Nurse keypad option faulty The following faults may be assessed with a nurse keyboard option Battery LED lights up red 6 Battery pack faulty and does not flash after pressing the green button on the mains isolation switch and then actuating any function 7 Charging connection faulty Battery LED lights up red 8 Mains isolation switch is not discon even though battery pack is nected not discharged Contents 64 of 88 1 Deactivate the key lock 2 Connect the plug or check the socket 3 Press the green button on the mains isola tion switch and then actuate any function on the han
66. the trapeze bar grab handle GJ 61 Further accessories L 61 Help V1 2 11 04 2012 Table of contents 2 2 Troubleshooting LJ 62 Table of faults LJ 63 Service points LJ 66 Appendix LI 67 Symbols used lz 68 Technical data L 69 Classification Lt 71 Type label tt 72 Service life disposal LO 74 Manufacturer s declarations forms electronic instructions for use 11 75 Contents 5 of 88 Help Volker bed models 2082 3082 3082 K built after June 2009 Instructions for use G81 V1 2 11 04 2012 Foreword We are delighted that you have chosen Volker beds We are also grateful for the trust you have placed in our company and our products This step is undoubtedly the result of extensive considerations and exami nations of the requirements that you require on new care or hospital beds based on your previous experiences You clearly had good reasons to choose Volker care beds We promise you that Volker beds will not disappoint you Contents Not for nothing do Volker beds enjoy a worldwide reputation as particularly innovative medical aids This refers not only to the design principle which was completely redeveloped by Volker It also refers to the multitude of product advantages which were continually tested and improved for their practicality These will support the comfort of the oc cupant patient and also help reduce the load of daily care work Now every care or hospital bed has produc
67. transported the castors must always be raised since the bed may be required as a support for when the occupant patient stands up or lies down lf the bed rolls away while the castors are down this can lead to a serious fall Once the cas tors have been raised LI 39 it must be checked that the bed is actually securely parked i e the castors are completely raised The bed can be in a non fully braked status even after first activation or reactivation and consequently it must be checked that the castors are correctly raised sided loads on the bed it must not be used as a seat for persons other than the occupant patient i e visitors must not sit on the edge of the bed Side rails A WARNING Risk of entrapment In the case of occupants patients whose physical or mental condi tion makes it necessary to use side rails to protect them from fall ing out of bed the following safety measures must be observed The legal permissibility of us ing side rails must be ascer tained The side rails may only be op erated by trained care person nel Contents 13 of 88 Volker bed models 2082 3082 3082 K built after June 2009 Instructions for use G81 Help V1 2 11 04 2012 Notes General safety notes 3 5 e Ensure that the side rails or parts thereof are either fully raised and locked in position or completely lowered It must be ensured that the occupant does not come into contact with
68. ts 73 of 88 Help Instructions for use G81 V1 2 11 04 2012 l Appendix Service life disposal The bed s expected service life is approx 10 years To ensure environ mentally responsible disposal after decommissioning please contact your responsible area sales manager Contents 74 of 88 Help V lker bed models 2082 3082 3082 K built after June 2009 Instructions for use G81 V1 2 11 04 2012 Appendix Manufacturer s declarations forms electronic instructions for use Manufacturer s declarations Declaration of conformity LI 76 Table 201 Guidelines and manufac turer s declaration Electromagnetic compatibility 6 8 3 201 a 3 77 Guidelines and manufacturer s decla ration Electromagnetic compatibility 6 8 3 201 a 6 Li 78 Table 204 Guidelines and manu facturer s declaration Electromag netic compatibility for all devices and systems that are not life sustaining 6 8 3 201 b E 80 Table 206 Recommended protected distance between portable and mo bile HF telecommunications equip ment and the bed for devices and systems that are not life sustaining 6 8 3 201 b El 82 Contents Forms Electronic instructions for use e Technical check of Volker hospital e Requirement for the use of the elec and healthcare beds in accordance to tronic instructions for use 85 German standards and safety regula tions incl measurements required 83 Spare part order form 84 75
69. uffoca tion 28 of 88 Volker bed models 2082 3082 3082 K built after June 2009 Instructions for use G81 90 x 200 210 220 cm 100 x 200 210 220 cm 40 50 kg m 40 50 kg m A DANGER The height of the raised side rails above the mat tress must always be greater than or equal to 220 mm oth erwise the occupant patient may accidentally fall out of bed Please note that the height of the mattress has a direct influence on this Help V1 2 11 04 2012 I Functional description Accessories 2 2 Use of securing systems Securing systems such as belts or straps should only be used exactly as specified by the manufacturer If securing systems in the form of ab dominal belts are used then it must be ensured that the side rails are com pletely raised In this case the gap in the middle of the rails must always be closed using a rail spacer on models 3082 and 3082 K Contents A DANGER When using securing systems and rail spacers please note the separate instructions for use pertaining to these acces sories If the patient is restrained with the help of restraint holders the lying surfaces must never be adjusted while the patient is restrained and must always be in the lowest position The lying surface adjustment functions must be locked when a patient is secured and the hand control must be kept out of the patient s reach 29 of 88 Volker bed models 2082 3082 3082 K built afte
70. ut after the bed has been disinfected 55 of 88 WARNING After maintenance repair work is complete always check that the bed is functioning correctly It must be checked that the bed can be used correctly without risk to the occupant pa tient or care personnel WARNING When working on the open motor it must be ensured that there is no contact with the power supply board for at least 20 minutes after disconnecting it from the power supply and the battery The reason for this is to allow self discharge of the 4 7nF smoothing capacitor which would represent a risk to persons WARNING When connecting a motor to the extension board it must be noted that only 1 motor may be connected Help Volker bed models 2082 3082 3082 K built after June 2009 Instructions for use G81 V1 2 11 04 2012 I Maintenance Maintenance schedule The bed requires little maintenance All movable parts for the height adjustment mechanism the lying surface motor sys tems and the side rails are provided with long lasting lubricant at the factory It is recommended that the bed is subjected to a regular or at least once a year Technical check 57 incl visual inspection and functional check as described in the checklist LJ 83 and any damage uncovered as a result such as signs of wear and tear loose screws or breaks fractures be eliminated im mediately After every lengthy period of non use a Technical check LJ 57 must be
71. verified by an on site test Disturbance is possible in the environment of equipment that bears the following label f fs W mas Jem Yo Remark 1 At 80 MHz and 800 MHz the higher frequency range applies Remark 2 These guidelines may not be applicable in all cases The spread of electromagnetic parameters is influenced by the absorption and reflection of buildings objects and people a The field strength of stationary transmitters such as base stations of cordless telephones and mobile land radio amateur radio stations AM and FM radio and TV stations cannot be quantified in theory in advance accurately To determine the elec tromagnetic environment in relation to a stationary transmitter a study of the site should be considered If the measured field strength at the site where the bed is used exceeds the conformity levels stated above the bed should be observed to ensure that it functions correctly If unusual features are observed additional measures may be required such as modified alignment or a different location for the bed b In the frequency range from 150 kHz to 80 MHz the field strength should be less than 3 V m Contents 81 of 88 Help Volker bed models 2082 3082 3082 K built after June 2009 Instructions for use G81 V1 2 11 04 2012 Table 206 Recommended protective distance between portable and mobile HF telecommunications equipment and the bed for devices and systems that are not life sustainin
72. with Anti Trendelenburg positioning option Head end raised Head end lowered 48 of 88 Volker bed models 2082 3082 3082 K built after June 2009 Instructions for use G81 Anti Trendelenburg positioning Trendelenburg positioning A 600 Nurse keypad option Help V1 2 11 04 2012 Operation Comfort seating position option Adjusting the comfort seating posi tion 1 Move the back O S gt and the upper leg section O20 upwards a little to a comfortable position Alternatively you can reach this position in a single step by press ing the Auto Contour button option OO 2 Swivel the bed to the comfort seat ing position by pressing the Anti Trendelenburg button OS option Anti Trendelenburg positioning Occupants patients who are unable to Restoring the straight lying surface leave the bed either because their circu e p 3 7 latory system is too unstable or they first To return to a horizontal lying position have to be taught how to sit can gain a lot of benefit from the comfort seating position as it provides an active sitting position in the bed Auto Contour tion SO in any preferred order to Hand control with Anti Trendelenburg posi their lowest position tioning option and Auto Contour option move the lying surface a and e the back Yo and upper leg sec Contents 49 of 88 Help Volker bed models 2082 3082 3082 K built after June 2009 Instru
73. x 200 210 220 cm Max load on castors 100 kg dynamic Volumetric weight of the mat 40 50 kg m tress material Unladen weight approx 108 kg Mains voltage Rated power Rated frequency AC 230 V EU version AC 240 V UK version AC 115 V US version 300 VA 50 Hz EU UK version 60 Hz US version Contents 69 of 88 Volker bed models 2082 3082 3082 K built after June 2009 Instructions for use G81 Help V1 2 11 04 2012 Appendix Technical data standard design 2 2 Primary fuse 3 15 A EU version 5 0A UK version 6 3A US version Battery pack Type 2 x 12 V block battery lead gel 7 2 Ah Operating temperature range 10 C to 40 C Transport storage tempera ture range 20 C to 60 C Air humidity 30 to 75 rel Atmosphere range 700 hPa to 1060 hPa Operating volume 55db A Contents 70 of 88 Help Volker bed models 2082 3082 3082 K built after June 2009 Instructions for use G81 V1 2 11 04 2012 Appendix Classification Protection against electric shock Protection class I or device with internal electrical cur rent source D Mode of operation Int 4 min 10 min On time max 4 min Off time 10 min Technical check 1x yearly Protection type by housing as per EN 60529 IPX4 not suitable for clean ing in automatic washing systems

Instructions for use Models 2082, 3082, 3082 K

Contents

Download Pdf Manuals

Related Search

Related Contents