hp StorageWorks director 2/64 torque tool caution flyer
Contents
1. without warranty of any kind and is subject to change without notice The warranties for Hewlett Packard Company products are set forth in the express limited warranty statements accompanying such products Nothing herein should be construed as constituting an additional warranty Printed in the U S A La invent2. Installation Procedure To replace a card 1 Insert the torque tool into the top Allen screw at the top of the card Turn the torque tool clockwise until you feel it release and hear a clicking sound As the screw turns clockwise the card inserts into the backplane connector 2 Insert the torque tool into the locking Allen screw at the bottom of the card Turn the torque tool clockwise until you feel it release and hear a clicking sound As the screw turns clockwise the card locks into place Hewlett Packard Company 2002 All rights reserved Hewlett Packard Company makes no warranty of any kind with regard to this material including but not limited to the implied warranties of merchantability and fitness for a particular purpose Hewlett Packard shall not be liable for errors contained herein or for incidental or consequential damages in connection with the furnishing performance or use of this material This document contains proprietary information which is protected a conn ht No part of this document may be photocopied reproduced or translated into another language without the prior written consent of Hewlett Packard The information contained in this document is subject to change without notice All other product names mentioned herein may be trademarks of their respective companies Hewlett Packard Company shall not be liable for technical or editorial errors or omissions contained herein The information is provided as is
3. hp StorageWorks director 2 64 torque tool caution flyer Part Number A6534 96021 AA RTALA TE The torque tool P N A6534 67011 with 5 32 inch hexagonal adapter P N A6534 67012 gt shown at right is required to remove and replace director logic cards dd tool supplied with the director is designed to tighten these cards and is set to release at a torque value of six CAUTION Use of the wrong tool may overtighten and damage the director logic and port cards The torque inch pounds Do not use an Allen wrench or torque tool designed for use with another HP product Module Removal Procedure StorageWorks director 2 64 service manual before performing a FRU repair This reference gives additional i CAUTION Refer to the specific FRU Removal and Replacement procedures located in Chapter 4 of the hp steps that are required to reduce the possibility of problems or customer down time To remove a card 1 Insert the torque tool into the locking Allen screw at the bottom of the card Turn the screw counterclockwise until the spring releases and the tool turns freely The module is now unlocked 2 Insert the torque tool into the top Allen screw at the top of the card To unseat the card and back it out of the backplane turn the screw counterclockwise until the tool turns freely 3 Pull the card from its card track and remove it from the director chassis Place the card in an antistatic bag to provide ESD protection Module
Download Pdf Manuals
Related Search