Blender HR 2849
Contents
1. Service Service Service Philips Domestic Appliances and Personal Care Servic Blender HR 2849 Manua Product information HR 2845 Blender with jar HR 2849 HR 2845 with HR 2934 Optional HR 2924 Mill see Service Manual 4822 729 21479 HR 2926 Chopper see Service Manual 4822 729 21481 HR 2934 Filter see Service Manual 4322 277 00070 Type no HR 2845 AM means first version and production centre is Mexico HR 2845 AB means first version and production centre is Brazil Safety system The blender operates only if the jar mill or chopper is correctly placed on the drive unit The cap locks the lid to the jar in order to avoid spillage Safety cap Cord storage Switch 3 speeds with pulse position in the max position slide control Power consumption 400 W Dimensions Ixhxw 18 5 x 38 5 x 17 cm Volume jar Effective 1 5 and total 2 0 litre Cleaning Do not clean the parts ina dishwasher Product meets the requirements regarding interference suppression on radio and TV Published by Philips Domestic Appliances and Personal Care 4322 277 00071 02 04 PCS 101 289 It allows control of the cordset length Printed in the Netherlands Service Information Safety device The appliance can only be operated if the jar item 23 is placed on the body of the appliance so that the safety interruptor item 10 located inside the appliance is activated by means of2. a shaft item 9 Knife assy To remove the knife assy item 17 from the jug item 23 turn the knife assy clockwise Disassembly of the appliance Loosen the two screws to be able to remove the base from the appliance Then undo the 3 snap connections which fasten the base 2 snap connections in the front part and 1 snap connection in the rear part Remove the base Remove the cover item 1 of the body item 3 by undoing its snap tabs through the 4 openings near the jar coupling Drive coupling item 2 can now be loosened with the help of a hammer and a screwdriver Hit the screwdriver with a short sharp blow of the hammer and remove the drive coupling clockwise Grasp the end of the motor shaft and turn the motor anticlockwise Disconnect the motor wires Inspection after repair Test the safety interruptor by mounting and dismounting the jar while the appliance is switched on Make sure that the speed switch operates properly in all speed settings After the product has been repaired it should function properly and has to meet the safety requirements as laid down officially established at this moment Copyright reserved PHILIPS Subject to modification PHILIPS 4822 441 31341 4822 690 40302 4822 441 31364 Not available 4822 532 61264 4822 361 30444 4822 361 30448 9 10 4822 276 13585 10 4822 277 21774 12 4822 441 31345 13 4822 441 31347 14 4822 321 10364 15 4822 528 20789 16 4822 532 52643 17
3. 4822 690 40299 18 4822 273 10293 21 4822 441 31335 22 4822 441 31334 23 4822 418 40975 4222 000 87410 0 NPOD HR 2934 Filter 4206 136 49450 PCS 101 290 Cover drive unit Fan coupling Top housing Motor buffer Motor 220 230 V Motor 120 127 V Safety system Safety switch Lower cover Bottom housing Flex standard Driven coupling Sealing ring Knife unit Switch and wires Cap of jar Lid of jar Cil jar Direction for use DAP 0157 50 60 HAL
Download Pdf Manuals
Related Search