black detachable solo rack for softails - Harley
Contents
1. MOTOR INSTRUCTIONS BLACK DETACHABLE SOLO RACK FOR SOFTAILS GENERAL docking points as shown in the bottom view of Figure 1 This may require some gentle squeezing or spreading of Kit Number the rack 53612 08 is04150 Models For model fitment information please see the P amp A Retail Catalog or the Parts and Accessories section of www harley davidson com English only Additional Parts Required Separate purchase and installation of additional parts or accessories may be required for proper installation of this kit on your model motorcycle Please see the P amp A Retail Catalog or the Parts and Accessories section of www harley dav idson com English only for a list of required parts or accessories for your model WARNING The rider s safety depends upon the correct installation of this kit Use the appropriate service manual procedures If the procedure is not within your capabilities or you do not have the correct tools have a Harley Davidson dealer perform the installation Improper installation of this kit could result in death or serious injury 00333a NOTE This instruction sheet references Service Manual information A Service Manual for your model motorcycle is required for this installation and is available from a Harley Davidson Dealer Kit Contents See Figure 3 and Table 1 INSTALLATION NOTE Maximum luggage rack weight capacity is ten pounds 4 5 Kg IWAN IN Do not exc2. eed luggage rack weight capacity Too much weight can cause loss of control which could result in death or serious injury 00373a Front fork notch Front docking point Rotary latches Rear docking point Rear docking point closed 1 See Figure 1 and Figure 2 While standing behind the motorcycle place the front fork notches 1 into the front docking points 2 as shown in the top view of Figure 1 and Figure 2 OBODE Figure 1 Detachable Solo Rack 2 Pullthe rotary latches 3 back into their rearmost position as shown in center view of Figure 1 Position the rear 3 Push downward and close the rotary latches 5 by rotary latches over the rear docking points 4 making pressing the latch lever as far forward as it will go as certain the latches and rack fit into the neck of the rear shown in the lower view of Figure 1 You will hear a click J04421 Many Harley Davidson Parts amp Accessories are made of plastics and metals which can be recycled 1 of 3 Please dispose of materials responsibly when the latch is in place If the latch does not easily close do not force Recheck alignment as described in Step 2 and Figure 2 NOTE After installing solo rack pull upward to be sure it is locked into place 4 To remove the solo rack press the release button A shown in Figure 3 and pull the rotary latch lever back Carefully lift the rear of the solo rack up and pull the solo rack out of the front docking po
3. ints J04421 is00060 1 Correct 2 Incorrect 3 Incorrect Figure 2 Upright Notch to Docking Point Engagement 2of3 SERVICE PARTS is05178 Figure 3 Service Parts Black Detachable Solo Rack Table 1 Service Parts Table Kit ltem Description Quantity Part Number Kit 53612 08 1 Black detachable solo rack Not Sold Separately 2 Load label Not Sold Separately 3 Stud splined Not Sold Separately Kit 53508 95 4 Rotary latch assembly right Not Sold Separately Kit 53509 95 5 Rotary latch assembly left Not Sold Separately The following items are common in kits 53508 95 and 53509 95 6 Button head screw Not Sold Separately 7 Flatwasher 6827 8 Wave spring washer 6828 9 Roll pin stainless steel not shown 668 10 Compression spring not shown 53602 95 A Rotary latch release button J04421 3 of 3
Download Pdf Manuals
Related Search