ASSEMBLY INSTRUCTIONS
Contents
1. 6 supplied 5 16 bolts I 2 3 4 and washers 6 and torque to 15 18 ft lbs using blue threadlocker Note Review the diagram to the right for proper bolt positions Tip On some models there is limited clearance on the rear cylinder so using a small hex driver and wrench will allow easier installation FIG A CAUTION NOTE FOGGING MAY OCCUR ON THE INSIDE OF Ea THE LEXAN WINDOWS DUE TO HUMIDITY CHANGES a WINDOW RSD CLARITY TWIN CAM ROCKER BOX COVER 8 Install the fuel tank and any other components that have been removed P D IF FOGGING IS VISIBLE START THE MOTORCYCLE Paitin 0al AND RUN UNTIL FOGGING DISAPPEARS For questions pertaining to the installation of this product please contact the Performance Machine technical department at 1 800 479 4037 This product is manufactured in the USA by Performance Machine LLC CLARITY WINDOW IS PERMANENTLY INSTALLED AT THE FACTORY AND SHOULD NOT BE REMOVED OR SERVICED IF REMOVAL IS NECESSARY CONTACT THE TECH DEPARTMENT FOR SPECIAL SERVICE INSTRUCTIONS PERFORMANCE MACHINE THE MANUFACTURER IS NOT RESPONSIBLE FOR DAMAGE TO THE CLARITY WINDOW CAUSED BY IMPROPER SERVICE USE ONLY POLYCARBONATE APPROVED CLEANERS SUCH AS PLEXUS TO CLEAN YOUR CLARITY WINDOW HARSH CHEMICALS MAY CAUSE DAMAGE 0048 0931 REVISION A 2 7 13 ASSEMBLY INSTRUCTIONS SHCSLOW HEAD 832X 1 2 WWI BRAT Fg WASHER 316X 440X 060 STANLESS RSD CLARITY TWIN CAM ROCKER COVER BOX 1999 UP GASKET TWIN CAM ROCKER BO2. I ROLAND SANDS DESIGN Turn your motorcycle off place securely on a lift or side stand and disconnect the battery 2 Remove the fuel tank refer to the HD service manual for additional instructions 3 With the tank removed remove the factory rocker box covers Clean and inspect all sealing surfaces refer to the HD service manual for specific instructions 4 Install the front rocker box cover gasket 9 and RSD rocker box 7 from the right side of the bike exhaust side install slowly to avoid damge to the cover or the motorcycle 5 Once the RSD rocker box cover is in the correct position insert the 6 supplied 5 16 bolts I 2 3 4 and washers 6 and torque to 15 18 ft lbs using blue threadlocker Note Review page 2 diagram for proper bolt positions PRODUCT DESCRIPTION 2000 UP TWIN CAM MODELS CLARITY ROCKER BOX COVERS 0177 2034 For questions pertaining to the installation of this product please contact the Performance Machine technical department at 1 800 479 4037 This product is manufactured in the USA by Performance Machine LLC ROLAND SANDS DESIGN Clarity Rocker Box Covers RSD CLARITY ROCKER BOX COVERS INSTALLATION continuea 6 Install the rear rocker box cover gasket 9 and RSD rocker box 7 from the right side of the bike exhaust side Disclaimer install slowly to avoid damge to the cover or the motorcycle 7 Once the RSD rocker box cover is in the correct position insert the
3. X COVER 1999 UP PAGE 2 m DESCRIPTION SHCSSIGI8 718 SHCS5 16 18X1 CHROME SHCS5 16 18X 12 CHROME SHCS5 16 18X 3 4 CHROME EF
Download Pdf Manuals
Related Search