SD 027 - MotoMummy
Contents
1. Before installing this product check the contents of the kit If anything is missing please contact an Ohlins dealer Kit Contents Part No Pos Steering damper 02261 20 1 Bracket assy 02230 09 1 Bolt M8x40 01046 21 1 Spacer 02238 05 1 Teflon spacer 02259 01 1 Ohlins Sticker 00192 01 2 Owner s Manual 07261 01 1 Please note that during storage and transportation especially at high ambient temperature some of the oil and grease used for assembling may leak and stain the packaging This is in no way detrimental to the product wipe off the excessive oil grease with a cloth A Warning Before installing this product read the Ohlins Owner s Manual The shock absorber is an important part of your vehicle and will affect the stability Ohlins products are subject to Pa ot Steering Damper for Yamaha R1 continuous improvement and development Issued 2009 04 14 therefore although these instructions include the most up to date information available at the time of printing minor updates may occur To find the latest information contact your Ohlins distributor Please consult your Ohlins dealer if you have any questions regarding the contents in this document M ou nti n g l nstructi ons hlins Racing AB All rights reserved Any reprinting or unauthorized use without the written permission of hlins Racing AB is prohibited hlins Racing AB Box 722 S 194 27 Upplands V sby Sweden Phone 46 8 590 02. 25 00 fax 46 8 590 025 80 ADVANCED SUSPENSION TECHNOLOGY ADVANCED SUSPENSION TECHNOLOGY www ohlins com A Warning It is advisable to have an Ohlins dealer install the steering damper When installing consult your Vehicle Service Manual 1 Put the motorcycle on a workstand so that the front wheel barely touches the ground A Warning Make sure the vehicle is securely supported so that it will not tip em OND Remove the original steering damper See the Vehicle Service Manual for advice 3 Install the bracket assembly 02230 09 on the hlins steering damper 4 Install the hlins steering damper to the original brackets Use bolt 01046 21 original nut and spacer 02238 05 for the end eye bracket on the front fork leg Use original bolt and washers to the frame bracket Install the teflon spacer between the hlins bracket and the lower original washer Torque Original bolt 7 Original washer Bracket assy 02230 0 QX SNN Teflon spacer e gt 02259 01 Original washer Bolt 01046 21 il m Caution Ensure that there is no clearance problem when turning to the left and the right end positions Make sure that the steering damper is not used as a stop m Caution Make sure that all screws are tightened to the correct torque and that nothing fouls or restricts movement of the steering damper 5 Adjust the bracket assembly so that the steering damper stroke is eq
3. ual in each steering direction 6 Tighten the bolts to correct torque see figure A Warning Before riding always make sure that the basic settings made by hlins are according to recommended Set up Data Read about adjustments and setting up in the hlins Owner s Manual before you make any adjustments Contact an hlins dealer if you have any questions about setting up the steering damper Adjuster knob Recommended set up 10 clicks
Download Pdf Manuals
Related Search