DPY 8506 GXB1 Dryer User Manual
Contents
1. o0eko Dryer DPY 8506 GXB1 User Manual 296031 1036_EN 220115 1715 Please read this user manual first Dear Customer Thank you for prefering a Beko product We hope that your product which has been manufactured with high quality and technology will give you the best results We advise you to read through this manual and the other accompanying documentation carefully before using your product and keep it for future reference If you transfer the product to someone else give its manual as well Pay attention to all details and warnings specified in the user manual and follow the instructions given therein Use this user manual for the model indicated on the cover page Explanation of symbols Throughout this user manual the following symbols are used Important information or useful hints about usage Warning for hazardous situations with regard to life and property Warning against electric shock Warning against hot surfaces Warning against fire hazard Packaging materials of the product are manufactured from recyclable materials in accordance with our National Environment Regulations e gt gt ea Do not dispose of the packaging wastes with the domestic waste or other wastes discard them to the dedicated collection points designated by the local authorities El Important instructions for safety and environment This section contains safety instructions that will he2. e Loading door is ajar gt gt gt Push the loading door to close until you hear a locking sound Water Tank warning symbol is on flashing e Water tank is full gt gt gt Drain the water tank e Water draining hose is bent gt gt gt If the product is connected directly to a wastewater drain check the water drain hose Filter Drawer Cleaning warning symbol is flashing e Filter drawer is not cleaned gt gt gt Clean the sponge and the filter cloth in the filter drawer If you cannot eliminate the problem although you follow the instructions in this section consult your dealer or the Authorized Service Agent Never try to repair a nonfunctional product yourself 30 32 EN Dryer User Manual 8 Electrical Connection Make sure that you have an earthed power outlet socket rated at 13 amps minimum Attention If you use your dryer as built in the socket must be reachable after installation or a separate switch which can disconnect the two poles must be used in the installation Check for suitability For a permanent connection a master switch with at least 3mm contact clearance and minumum 13 A rating must be used Electrical requirements Before you insert the plug into the wall socket make sure that the voltage and the frequency shown in the rating label corresponds to your electricity supply We recommend that this appliance be connected to the mains
3. height of maximum 80 cm Make sure that the water drain hose Ci is not stepped on and it is not folded between the drain and the machine 3 4 Adjusting the feet In order to ensure that the dryer operates more silently and vibration free it must stand level and balanced on its feet Balance the machine by adjusting the feet e Turn the feet to left or right until the dryer stands level and firmly Water collected during operation is pumped to water tank It is normal to hear pumping noise during this process Never unscrew the adjustable feet from their housings Dryer User Manual 13 32 EN 4 Preparation 4 1 Laundry suitable for drying in the dryer Always obey the instructions given on the garment tags Dry only the laundry having a label stating that they are suitable for drying in a dryer and make sure that you select the appropriate programme LAUNDRY DRYING SYMBOLS DO Suitable for Symbols dryer O 2 QO Ld Settings At any temperature At high temperature At medium temperature At low temperature AA Sensitive Delicate dry I Do not dry clean K Do not dry with dryer Without heating Hang to dry Hang wet to dry Lay in shadow Dry cleanable X A Iron at high Dry or Steam temperature Iron at medium Iron at low temp
4. wire to the terminal in the plug marked N or coloured black 3 Connect the brown live wire to the terminal in the plug marked L or coloured red With the alternative plugs a 13A fuse must be fitted either in the plug or adaptor or in the main fuse box If in doubt contact a qualified electrician Green and yellow Blue or black Brown or red Dryer User Manual 31 32 EN
5. Operating the product Anti creasing CO Anti creasing programme duration may be changed with the Anti creasing selection button You can use Anti creasing function to prevent laundry from creasing if you will not take the laundry out after the program has come to an end This programme rotates the laundry in every 240 second for selected time to prevent creasing Following images identify the level changes Anti creasing 120 minute Press Anti creasing button to activate this function 10 Anti creasing symbol will illuminate at the end of the programme if Anti creasing i function is activated Favourite selection button A programme with the set auxiliary function is saved with Favourite selection button When the product is switched on and off features of the saved programme is displayed by means of Favourite selection button 1 Select the programme with the programme button select the auxiliary functions such as Anti creasing Dryness Level etc 2 Press and hold the Favourite selection button for about 3 seconds Features of set programme will be saved End time With the End Time function the end time of the programme may be delayed up to 24 hours The time on the display is the total of normal drying time and end time e Open the loading door and put the laundry in e Select the drying program Press End Time button to set the desired time delay e Press Start Pause button Tim
6. at the behind of the dryer by hand in order to disconnect it from where it is connected Do not use any tools to remove the hose 3 Connect one end of the drain hose supplied with the dryer to the connection point from where you removed the hose of the product in previous step 4 Connect the other end of the drain hose directly to the wastewater drain or to the washbasin 12 32 EN Dryer User Manual Installation 3 5 Electrical connection For specific instructions for electrical connection required during installation see 1 1 1 Electrical Safety 3 6 Transportation of the dryer Unplug the dryer before transporting it Drain all water that has remained in the dryer f direct water drain connection is made then remove the hose connections We recommend carrying the dryer in upright position If it is not possible to carry the machine in the upright position we recommend carrying it by tilting towards the right side when looked from the front 3 7 Warnings about sounds Hose connection should be made in a A PRE safe manner Your drain house will be It is normal to hear a metallic noise A flooded if the hose comes out of its Ci from the compressor sometimes during housing during water discharge operation Water drain hose should be attached to a
7. be damaged if metal reinforcements come loose and break off during drying Use softeners and similar products in accordance with the Gi instructions of their manufacturers Always clean the lint filter before or after each loading Never Gi operate the dryer without the lint filter installed e Never attempt to repair the dryer by yourself Do not perform any repair or replacement procedures on the product even if you know or have the ability to perform the required procedure unless it is clearly suggested in the operating instructions or the published service manual Otherwise you will be putting your life and others lives in danger e There must not be a lockable sliding or hinged door that may block the opening of the loading door in the place where your dryer is to be installed e nstall your dryer at places suitable for home use Bathroom closed balcony garage etc e Make sure that pets do not enter the dryer Check the inside of the dryer before operating it e Do not lean on the loading door of your dryer when it is open otherwise it may fall over e The lint must not be allowed to accumulate around the tumble dryer 6 32 EN Dryer User Manual Important instructions for safety and environment 1 2 Mounting over a washing machine e A fixing device should be used between the two machines when installing the dryer above a washing machine The fitting device must be installed by the authorized
8. continously indicating that the filter needs to be cleaned i G For detailed information see 6 Maintenance and cleaning If the filter cleaning symbol flashes continuously see 7 Troubleshooting Draining the water tank When the programme is completed a warning symbol will appear continously to remind that the water tank needs to be drained G f the water tank becomes full while the programme is running the warning symbol will start to flash and the dryer will pause Drain the water in the water tank and press Start Pause button to resume the programme The warning symbol turns off and the programme resumes operating G Cleaning the filter drawer Warning symbol flashes to remind that the filter drawer needs to be cleaned G For detailed information see 6 Maintenance and cleaning For detailed information see 6 Maintenance and cleaning Loading door open This warning symbol Pause appears and programme progress symbol flashes when the loading door of the dryer is open 22 32 EN Dryer User Manual Operating the product 5 10 Starting the programme Press the Start Pause button to start the program Start P symbol will light up to indicate that the programme has started and symbol in the middle of the remaining time will keep flashing Drying and programme progress bar will be displayed alternately 5 1
9. service agent e Total weight of the washing machine and the dryer with full load when they are placed on top of each other reaches to approx 180 kilograms Place the products on a solid floor that has sufficient load carrying capacity Washing machine cannot be placed on the dryer Pay attention to the above warnings during the installation on your washing machine Installation Table for Washing Machine and Dryer Washing Machine Depth 62cm 60 cm 54cm 50 cmi 49 cm 45 cm 40 cm Dryer Depth 54 cm Can be Canbe Canbe Canbe Canbe Canbe Cannot be C installed installed installed installed installed installed installed 60 Canbe Canbe Canbe Canbe Can be Cannot be Cannot be cm installed installed installed installed installed installed installed Dryer User Manual 7 32 EN Important instructions for safety and environment 1 3 Intended use e Dryer has been designed for domestic use It is not suitable for commercial use and it must not be used out of its intended use e Use the dryer only for drying laundry that are marked accordingly e The manufacturer waives any responsibility arisen from incorrect usage or transportation e The service life of the dryer that you purchased is 10 years During this period original spare parts will be available to operate the dryer properly 1 4 Child safety e Packaging materials are dangerous for
10. the children Keep packaging materials away from children e Electrical products are dangerous for the children Keep children away from the product when it is operating Do not let them tamper with the dryer Use the child proof lock in order to prevent the children to tamper with the dryer i Child proof lock is on the control panel See Child lock e Keep loading door closed even when the dryer is not in use 8 32 EN Dryer User Manual Important instructions for safety and environment 1 5 Compliance with the WEEE regulation and disposing of the waste product We product complies with EU WEEE Directive 2012 19 EU This product bears a classification symbol for waste electrical and electronic equipment WEEE This product has been manufactured with high quality parts and ME materials which can be reused and are suitable for recycling Do not dispose of the waste product with normal domestic and other wastes at the end of its service life Take it to the collection center for the recycling of electrical and electronic equipment Please consult your local authorities to learn about these collection centers 1 6 Compliance with RoHS Directive The product you have purchased complies with EU RoHS Directive 2011 65 EU It does not contain harmful and prohibited materials specified in the Directive 1 7 Package information Packaging materials of the product are manufactured from recyclable materials in
11. this programme to make 2 shirts ready for ironing in 30 minutes There may be a little moisture on the shirts at the end of the programme We recommend you not to leave the shirts in the dryer e Delicates You can dry your highly delicate laundry silk blouses fine underwear etc that are suitable for drying or aundry which is advised to be hand washed at a lower temperature It is recommended to use a cloth bag to avoid certain delicate garments and laundry from getting creased or damaged Take your laundry immediately out of the dryer and hang them after the programme ends in order to prevent them being creased e Freshen Up Only ventilation is performed for 10 minutes without blowing hot air You can air the clothes that have been kept at closed environments for a long time and deodorize unpleasant odors thanks to this programme e Timer programmes You can select one of the 10 min 20 min 30 min 40 min 50 min 60 min 80 min 100 min 120 min 140 min and 160 min timer programmes to achieve the desired final drying level at low temperatures With this programme the machine dries for the time selected regardless of the dryness level 18 32 EN Dryer User Manual Operating the product 5 7 Programme selection and consumption table Spin speed in washing Approximate amount Ea machine rpm lof remaining humidi Pisin ime IDK Cottons Colore
12. to dry your jeans that are spun at high speeds in the washing machine e Mix Use this programme to dry non pigmenting synthetic and cotton laundry items together e WoolProtect Use this programme to dry woolen garments such as jumpers that are washed according to the instructions It is recomended that garments would be removed at the end of the programme has been approved by The Woolmark Z Company for the drying WOOLMARK of machine washable wool products provided that the products are washed and dried according to the instructions on the garment label and those issued by the manufacturer of this machine M1447 In UK Eire Hong Kong and India the Woolmark trade mark is a Certification trade mark The wool drying cycle of this machine e Night n this programme the level of noise emitted to the environment will be the lowest Volume level will be fifty percent lower with respect to the wardrobe dry for cottons programme e Xpress You can use this programme to dry your cotton laundry that you have spun at high speeds in your washing machine This programme dries 1 kg cotton laundry 3 Shirts 3 T shirts in 49 minutes e BabyProtect This programme is used for baby clothes that bear machine dryable approval on its label Dryer User Manual 17 32 EN Operating the product e Daily This programme is used to dry cottons and synthetics daily and lasts for 100 minutes e Shirts 30 Use
13. 1 Progress of programme 5 12 Child Lock Machine is equipped with a Child Lock which prevents interfering with the current programme flow by pressing any button To activate the Child Lock e Press and hold Childproof Lock button for 3 seconds e Child Lock symbol will appear on the display when the Child Lock is activated W iam e All buttons except the On Off Cancel and Child Lock button on the control panel are deactivated when the Child Lock is active e Display symbols will not change even if the position of Programme Selection knob is changed while the child lock button is active e When the programme selection knob is turned and function buttons are pressed Child Lock warning will be displayed e Jo start a new programme after the current programme is over or to interrupt the current programme the Child Lock should be deactivated To deactivate the childproof lock e Press and hold Child Lock button for 3 seconds e Child Lock is deactivated when the dryer is switched off and on with On Off Cancel button 5 13 Changing the programme after it has started After the dryer starts operation you can change the selected programme and dry your laundry in a different programme e Press and hold Start Pause button for 1 seconds to pause the programme e Select desired programme by turning the Programme Selection knob e Press the Start Pause button to start the program Adding removing laundry whil
14. See 6 Maintenance and cleaning e Clean the filter drawer regularly either when the 14 32 EN Dryer User Manual Preparation Filter Drawer Cleaning warning symbol appears or after every 3 drying cycles See 6 Maintenance and cleaning e Ventilate the room where the dryer is located well during drying 4 5 Correct load capacity Follow the instructions in the Programme selection and consumption table Do not load more than the capacity values stated in the table It is not recommended to load the dryer with laundry exceeding the level indicated in the figure Drying performance will degrade when the machine is overloaded Furthermore dryer and the laundry can get damaged Following weights are given as examples Laundry Approximate weights 9 Cotton quit covers double 1500 Cotton quit covers single 1000 Bed sheets double 500 Bed sheets single 350 Large tablecloths 700 Small tablecloths 250 Tea napkins Bath towels 100 Hand towels Blouses Cotton shirts Shirts Cotton dresses Dresses Jeans Handkerchiefs 10 pieces T Shirts Dry laundry weight before washing Dryer User Manual 15 32 EN 5 Operating the product 5 1 Control panel E S 1 2 3 20000000 1 Programme Selection knob 2 Dr
15. accordance with our National Environment Regulations Do not dispose of the packaging materials together with the domestic or other wastes Take them to the packaging material collection points designated by the local authorities Please visit the following website to get more information on the product http www beko com Dryer User Manual 9 32 EN Li instructions for safety and environment 1 8 Technical Specifications ENP Net weight plastic front door usage 50 5 kg Net weight glass front door usage 52 5 kg Voltage Rated power input See type label Model code Min height Height with adjustable feet are closed Max height Height with adjustable feet are opened maximum Dry laundry weight before washing Type label is located behind the loading door Technical specifications of the dryer are subject to specification Gi without notice to improve the quality of the product Figures in this manual are schematic and may not match the i product exactly Values stated on markers on the dryer or in the other published documentation accompanying with the dryer are obtained in i laboratory in accordance with the relevant standards Depending on operational and environmental conditions of the dryer these values may vary 10 32 EN Dryer User Manual Your Dryer 2 1 Package Contents 1 Water drain hose 2 Filter drawer spare sponge 3 User Manual 4 Drying
16. basket 5 Drying basket user manual It can be supplied with your machine depending on its model Dryer User Manual 11 32 EN Installation Before the calling the nearest Authorized Service for the installation of the dryer ensure that electrical installation and water drain is appropriate referring to the user s manual See 3 3 Connecting to the drain and 3 5 Electrical connection If they are not suitable contact a qualified electrician and technician to make necessary arrangements Preparation of the dryer s location i as well as the electrical and waste water installations is under customer s responsibility Prior to installation visually check if the dryer has any defects on it If the drier is damaged do not have it installed Damaged products cause risks for your safety Let your dryer wait for 12 hours before starting to use it 3 1 Appropriate installation location Install the dryer on a stable and level surface Dryer is heavy Do not move it by yourself e Operate your dryer in a well ventilated dust free environment e The gap between the dryer and the surface should not be reduced by the materials such as carpet wood and tape e Do not cover the ventilation grills of the dryer e There must not be a lockable sliding or hinged door that may block the opening of the loading door in the place where your dryer is to be installed e Once the dryer is installed it should stay at the same pla
17. button for 1 seconds to pause the programme and turn the programme selection knob e Press and hold On Off Cancel Button for 3 seconds and the programme will be cancelled As the dried laundry will be excessively hot when you cancel the programme while the dryer is running activate the Refresh programme to cool them down 5 15 End of programme When the programme comes to an end Lint filter Cleaning and Water tank warning symbols light up in the programme follow up indicator To turn off the dryer press On Off Cancel button 2 hour Anti creasing program will be activated if the laundry is not taken out after the program has come to an end 6 1 Cleaning lint filter and loading door inner surface Drain the water tank after each drying cycle See 6 3 Draining the water tank Ci Clean the lint filter after each drying See 24 32 EN Dryer User Manual g Maintenance and cleaning Service life of product extends and frequently experienced problems will be reduced if it is cleaned at regular intervals 6 1 Cleaning Lint Filter Loading Door Inner Surface Lint and fiber released from the laundry to the air during the drying cycle are collected in the Lint Filter Such fiber and lint are generally formed e Clean the entire inner surface of the loading door i during wearing and washing and loading door gasket with a soft damp cloth Always clean the lint fi
18. ce where its connections have been made When installing the dryer make sure that its rear wall does not touch anywhere tap socket etc e Place the dryer at least 1 cm away from the edges of other furniture e Your dryer can be operated at temperatures between 5 C and 35 C If the operating conditions fall outside of this range operation of the dryer will be adversely affected and it can get damaged e The rear surface of the tumble dryer shall be placed against a wall Do not place the dryer on the power cable 3 2 Removing the transportation safety assembly Remove the transportation safety assembly before using the dryer for the first time e Open the loading door e There is a nylon bag inside the drum that contains a piece of styrofoam Hold it from its section marked with XX XX e Pull the nylon towards yourself and remove the transportation safety assembly Check that no part of the transportation safety assembly remains inside the drum 3 3 Connecting to the drain n products equipped with condenser unit water accumulates in the water tank during the drying cycle You should drain accumulated water after each drying cycle You can directly drain accumulated water through the water drain hose supplied with the product instead of periodically draining the water collected in the water tank Connecting the water drain hose 1 2 Pull hose
19. ch includes drying levels 2 Select the desired programme with the Programme Selection knob Only the cotton laundry is dried at normal temperature Thick and multi layered laundry towels linens jeans and etc are dried in a way that they do not require ironing before being placed in the wardrobe Extra Dry Normal laundry tablecloths underwear and etc are dried in a way that they do not require ironing before being placed in the wardrobe Cupboard Dry Normal laundry shirts dresses and Iron Dry etc are dried ready to be ironed For further programme details see Programme selection and consumption table G 5 5 Main programmes Depending on the fabric type the following main programmes are available e Cottons Dry durable laundry with this programme Dries at normal temperature It is recommended to use for your cotton items bed sheets quilt covers towels bathrobes etc e Synthetics Dry less durable laundry with this programme Recommended for synthetics 5 6 Additional programmes For special cases following additional programmes are available in the machine G G Additional programs may differ according to the features of your machine To obtain better results from your dryer your laundry must be washed at suitable programmes and spun at the recommended spin speeds in the washing machine e Jeans Use this programme
20. did not suit the laundry type gt gt gt Checking the care labels on clothes select appropriate programme for the laundry type or use timer programmes in addition Pores of the lint filter are clogged gt gt gt Wash the lint filter with warm water Filter drawer is clogged gt gt gt Clean the sponge and the filter cloth in the filter drawer Excessive laundry is loaded gt gt gt Do not load the dryer in excess Laundry is not spun sufficiently gt gt gt Spin your laundry at a higher speed in your washing machine Dryer does not switch on or the programme does not start Dryer does not start when it is set It is not plugged in gt gt gt Make sure that the machine is plugged in The loading door is ajar gt gt gt Make sure that the loading door is closed securely Programme is not selected or the Start Pause Cancel button is not pressed gt gt gt Make sure that the programme is selected and the machine is not in Pause mode e Childproof Lock is activated gt gt gt Deactivate the Childproof Lock Programme is interrupted without any cause e Loading door is ajar gt gt gt Make sure that the loading door is closed securely e There was a power failure gt gt gt Press Start Pause Cancel button to start the programme e Water tank is full gt gt gt Drain the water tank Laundry has shrunk become felted or deteriorated e A programme suitable for the laundry type is not used g
21. ds e E E S ee a a a a z Eo Eco Cotton cupboard dry programme used at full and partial load is the standard drying programme to which the information in the label and the fiche relates that this programme is suitable for drying normal wet cotton laundry and that it is the most efficient programme in terms of energy consumption for cotton z ola Energy Label standard program EN 61121 2012 All values given in the table have been fixed according to EN 61121 2012 Standard These values may deviate from the values in the table according to the laundry type laundry spin speed environmental conditions and voltage fluctuations Dryer User Manual 19 32 EN Operating the product 5 8 Auxiliary functions Audio Warning cn The machine will give an audio warning when the programme comes to an end Use the Audio Warning Level button to adjust the sound level You can change the sound level either before the programme starts or while the programme is in progress G Dryness level adjustment selection Dryness level adjustment button is used to adjus the required dryness level Programme duration can change depending on the selection G You can activate this function only before the programme has started Volume level high Drying level damp Drying level normal Drying level extra 20 32 EN Dryer User Manual
22. e Remove the filter drawer cover by turning it in the direction of arrow 26 32 EN Dryer User Manual Maintenance and cleaning e Pull out the filter drawer Wash the filter drawer sponge by hand to remove the fiber and lint on the surface After washing the sponge squeeze it by hand and remove the excess water Well dry the sponge before storing it It is not necessary to clean the sponge Ci if lint and fiber accumulation on it is not significant e Open the filter drawer by pressing the red button e Take out the filter drawer sponge e Clean lint fiber and cotton raveling on the filter cloth by hand or with a soft piece of cloth e When you notice a layer that may lead clogging on the filter cloth please clean the layer by washing in warm water Let the filter cloth dry thoroughly before installing back the filter drawer Place the sponge back into its place Place the filter drawer back into its place turn the filter drawer cover in the arrow direction and close it Securely Dryer User Manual 27 32 EN Maintenance and cleaning e Close the kick plate cover Drying without the filter drawer sponge in place will damage the machine longer drying periods and higher energy A dirty lint filter and filter drawer will cause Ci c
23. e Delaying starts countdown and the time delaying symbol lights up on the display The in the middle of the displayed delay time will flash e Additional laundry may be loaded taken out during the End Time period At the end of the End Time countdown process End Time symbol disappears drying process starts and the programme duration is displayed Dryer User Manual 21 32 EN Operating the product G If loading door is opened and closed during the End Time duration the programme will switch to pause mode End Time function should be resumed with pressing Start Pause button Changing the End time If you want to change the time during countdown e End Time is deactivated when the dryer is switched off and on with On Off Cancel button Restart the dryer and repeat the End Time procedure for the desired time e When your dryer is operated for the first time it starts with the declaration programme wardrobe dryness for cottons Canceling End time function If you want to cancel the End Time countdown and start the programme immediately e End Time is deactivated when the dryer is switched off and on with On Off Cancel button e Press Start Pause button to start the programme you have previously selected 5 9 Warning symbols Warning symbols may differ according to the model of your machine Lint filter cleaning When the programme is completed a warning symbol will appear
24. e the dryer is in operation e In order to add or take out laundry after the drying programme has started e Press the Start Pause button to switch the dryer to Pause mode Drying process will pause e While in Pause mode open the loading door add or take out laundry and close the loading door e Press the Start Pause button to resume the program G G Any laundry added after the drying process has started may cause the clothes that are already dried in the machine intermingle with wet clothes and the result will be wet laundry after the drying process is over You may repeat laundry adding or removing process as many times as you desire during drying However this process will increase the programme time and energy consumption since the drying process will be interrupted repeatedly Therefore it is recommended to add laundry before the drying programme has started Dryer User Manual 23 32 EN Operating the product If you select a new programme by turning the Programme Selection knob while your drier is in Pause mode then the current program is aborted and new programme information is displayed Do not touch the inner surface of the drum when adding or taking out laundry A while a programme is running Drum surface and dryer air within is hot 5 14 Canceling the programme To cancel the programme after the dryer is started e Press and hold Start Pause
25. erature temperature Do not iron steam Maximum temperature 200 C 4 2 Laundry not suitable for drying in the dryer Delicate embroidered fabrics woolen silk i garments delicate and valuable fabrics airtight items and tulle curtains are not suitable for machine drying 3 Preparing laundry for drying Laundry may be tangled with each other after washing Separate the laundry items before placing them into the dryer e Dry garments having metal accessories such as Zippers inside out e Fasten the zippers hooks and buckles and button sheets Iron without 150 C 110 C 4 4 Things to be done for energy saving Following information will help you use the dryer in an ecological and energy efficient manner e Spin your laundry at the highest speed possible when washing them Thus the drying time is shortened and energy consumption is reduced Sort out the laundry depending on their type and thickness Dry the same type of laundry together For example thin kitchen towels and table clothes dries earlier than thick bathroom towels e Follow the instructions in the user manual for programme selection e Do not open the loading door of the machine during drying unless necessary If you must certainly open the loading door do not to keep it open for a long time e Do not add wet laundry while the dryer is in operation e Clean the lint filter before or after each drying cycle
26. lp protect from risk of personal injury or property damage Failure to follow these instructions shall void any warranty 1 1 General safety e The dryer can be used by children at and above 8 years old and by persons whose physical sensory or mental capabilities were not fully developed or who lack experience and knowledge provided that they are supervised or trained on the safe usage of the product and the risks it brings out Children should not play with the product Cleaning and maintenance works should not be performed by children unless they are supervised by someone e Children of less than 3 years should be kept away unless continously supervised e Adjustable feet should not be removed The gap between the dryer and the floor should not be reduced with materials such as carpet wood and tape This will cause problems with the dryer e Always have the installation and repairing procedures carried out by the Authorized Service Manufacturer shall not be held liable for damages that may arise from procedures carried out by unauthorized persons e Never wash the dryer by spraying or pouring water onto it There is the risk of electric shock Dryer User Manual 3 32 EN Important instructions for safety and environment 1 1 1 Electrical safety Electrical safety instructions should be followed while electrical connection is made during the installation e Connect the dryer to a grounded outlet protected by a fuse a
27. lter and the inner surfaces of the loading door after each drying process vacuum Cleaner Ci You can clean the lint filter housing with a To clean the lint filter e Open the loading door e Remove the lint filter by pulling it up and open the lint filter e Clean lint fiber and cotton raveling by hand or with a soft piece of cloth e Close the lint filter and place it back into its housing 6 2 Cleaning the sensor There are dampness sensors in the dryer that detect whether the laundry is dry or not To clean the sensors e Open the loading doorof the dryer e Allow the machine to cool down if it is still hot due to the drying process e Wipe the metal surfaces of the sensor with a soft cloth dampened with vinegar and dry them e A layer can build up on the filter pores that can cause clogging of the filter after using the dryer for a while Wash the lint filter with warm water i Clean metal surfaces of the sensors 4 times a year to remove the layer that builds up on the lint filter surface Dry the lint filter completely before reinstalling it Do not use metal tools when cleaning metal surfaces of the sensors Dryer User Manual 25 32 EN Maintenance and cleaning Never use solvents cleaning agents or similar substances for cleaning due to the risk of fire and explosion 6 3 D
28. onsumption 6 5 Cleaning the evaporator Clean the lint accumulated on the fins of the evaporator ocated behind the filter drawer with a vacuum cleaner to clean with bare hands Evaporator fins You can also clean by hand provided that J you wear protective gloves Do not attempt can harm your hand 28 32 EN Dryer User Manual 7 Troubleshooting Drying process takes too much time e Pores of the lint filter are clogged gt gt gt Wash the lint filter with warm water e Filter drawer is clogged gt gt gt Clean the sponge and the filter cloth in the filter drawer e Ventilation grids on the front side of the machine are blocked gt gt gt Remove the objects if any that block ventilation in front of the ventilation grids e Ventilation is not sufficient since the room where the machine is installed is very small gt gt gt Open the door and window of the room to avoid the room temperature increase too much Lime deposit has built up on the dampness sensor gt gt gt Clean the dampness sensor Excessive laundry is loaded gt gt gt Do not load the dryer in excess Laundry is not spun sufficiently gt gt gt Spin your laundry at a higher speed in your washing machine Laundry comes out wet at the end of drying i After drying the hot clothes feel damper than their actual dampness level e Itis likely that the selected programme
29. raining the water tank Dampness of the laundry is removed and condensed during drying process and the water that arise accumulates in the water tank Drain the water tank after each drying cycle a Condensed water is not drinkable Never remove the water tank when the program is running N If you forget to drain the water tank the machine will stop during the subsequent drying cycles when the water tank is full and the Water Tank warning symbol will flash If this is the case drain the water tank and press Start Pause button to resume the drying cycle To drain the water tank Pull the drawer and remove the water tank carefully Drain the water in the tank If there is lint accumulation in the funnel of the water tank clean it under running water e Place the water tank into its seat Ci an option there is no need to empty the water tank 6 4 Cleaning the filter drawer Lint and fiber that could not be captured by the lint filter are blocked in the filter drawer behind the kick plate Filter Drawer Cleaning warning light will light up maximum at every 3 drying cycles as a reminder There is a two level filter in the filter drawer Te first level is the filter drawer sponge and the second level is the filter cloth To clean the filter drawer e Press the kick plate button to open the kick plate If the direct water draining is used as oo000000
30. stain removers turpentine paraffin or paraffin removers must be washed in hot water with plenty of detergent before being dried in the dryer For this reason especially the items containing the above specified stains must be washed very well to do this use adequate detergent and choose a high washing temperature dryer due to the fire hazard e Garments or pillows bolstered with rubber foam latex foam shower bonnets water resistant textiles materials with rubber reinforcement and rubber foam pads e Clothing cleaned with industrial chemicals A Below specified laundry or items must not be dried in the Items such as lighter match coins metal parts needle etc may damage the drum set or may lead to functional problems Therefore check all the laundry that you will load into your dryer Never stop your dryer before the programme completes If you must do this remove all laundry quickly and lay them out to dissipate the heat Clothes that are washed inadequately may ignite on their own and even may ignite after drying ends Dryer User Manual 5 32 EN Important instructions for safety and environment e You must provide enough ventilation in order to prevent gases exiting from devices operating with other types of fuels including the naked flame from accumulating in the room due to the back fire effect A N Underwear that contains metal reinforcements should not be dried in the dryer Dryer may
31. supply via a suitable switched and fused socket in a readily accessible position Should the mains lead of the appliance become damaged or need replacing at any time it must be replaced by a special purpose made mains lead which can only be obtained from a Authorised Service Agent A Warning This appliance must be earthed If the fitted moulded plug is not suitable for your socket then the plug should be cut off and an appropriate plug fitted The moulded plug on this appliance incorporates a 13A fuse Should the fuse need to be replaced an ASTA approved BS1362 fuse of the same rating must be used Do not forget to refit the fuse cover In the event of losing the fuse cover the plug must not be used until a replacement fuse cover has been fitted Colour of the replacement fuse cover must be the same colour as that visible on the pin face of the plug Fuse covers are available from any good electrical store In order to avoid hazards damaged supply cord should be replaced by the manufacturer its service agent or similarly qualified people A Important Fitting a different plug As the colours of the wires in the mains lead of this appliance may not correspond with the coloured markings identifying the terminals on your plug proceed as follows 1 Connect the green yellow or green earth wire to the terminal in the plug marked E or with the symbol or coloured green and yellow or green 2 Connect the blue neutral
32. t gt gt Check the garment tag and select a programme suitable for the fabric type Drum lighting does not turn on On models with lamp e Dryer is not switched on with the On Off button gt gt gt Make sure that the dryer is switched on e Lamp is defective gt gt gt Call Authorized Service Agent to have the lamp replaced End Anti creasing symbol is on e Anti creasing programme is activated in order to prevent laundry that has remained in the machine from creasing gt gt gt Turn off the dryer and take out the laundry Dryer User Manual 29 32 EN Troubleshooting End symbol is on e Programme is over Turn off the dryer and take out the laundry Lint Filter Cleaning symbol is on e Lint filter is not cleaned gt gt gt Clean the lint filter Lint Filter Cleaning symbol is flashing e Filter housing is clogged with lints gt gt gt Clean the lint filter housing e A deposit has built up on the lint filter pores that may cause clogging gt gt gt Wash the lint filter with warm water e Filter drawer is clogged gt gt gt Clean the sponge and the filter cloth in the filter drawer Water leaks from the loading door e Lint has accumulated on the inner surfaces of the loading door and on the surfaces of the loading door gasket gt gt gt Clean the inner surfaces of the loading door and the surfaces of the loading door gasket Loading door opens spontaneously
33. t the value specified on the type label Have the grounding installation performed by a qualified electrician Our company shall not be liable for any damages that will arise when the dryer is used without grounding in accordance with the local regulations e The voltage and allowed fuse protection is stated on the type label plate e The voltage specified on the type label must be equal to your mains voltage e Unplug the dryer when it is not in use e Unplug the dryer from the mains during installation maintenance cleaning and repair works e Do not touch the plug with wet hands Never unplug by pulling on the cable always pull out by grabbing the plug e Do not use extension cords multi plugs or adaptors to connect the dryer to power supply in order to decrease the risk of fire and electric shock e Power cable plug must be easily accessible after installation Damaged mains cable should be changed notifying the Authorized service If the dryer is faulty it must not be operated unless it is repaired by an authorized service agent There is the risk of electric shock 4 32 EN Dryer User Manual Important instructions for safety and environment 1 1 2 Product safety Points to be taken into consideration for fire hazard Below specified laundry or items must not be dried in the dryer considering fire hazard e Unwashed laundry items e tems soiled with oil acetone alcohol fuel oil Kerosene
34. yness Level Adjustment button 3 Audio Warning Level button 4 Display 5 On Off Cancel button 6 Start Pause button 7 End Time button 8 Favourite button 9 Timer Programmes Selection button 10 Anti creasing button 5 2 Display symbols Se H ammm _ C ID Se 8 Spp A See S ffa Dryness level B Filter drawer cleaning warning symbol 6 Child lock warning symbol iG End time symbol AB BH Remaining time indicator OD Audio warning smbol EEG Filter cleaning warning symbol gt Q Smart grid symbol y Steam tank warning symbol Water tank warning symbol Start Pause symbol iS Programme progress bar E Time that appears on display indicates the remaining time until the end of the programme and changes according to the dampness level of the laundry and model of the dryer 16 32 EN Dryer User Manual Operating the product 5 3 Preparing the machine 1 Plug in your machine 2 Place the laundry in the machine 3 Press the On Off Cancel button for 1 second long 4 When your machine is operated for the first time it starts with the declaration programme wardrobe dryness for cottons Pressing the On Off Cancel button does not mean that the programme has started Press Start Pause button to start the program 4 Programme selection Decide the appropriate programme from the table below whi
Download Pdf Manuals
Related Search