SERVICE MANUAL, WARNING LIGHT REPLACEMENT Description
Contents
1. Parking brake T3MOTION PROPRIETARY INFORMATION Document No Revision Sheet Use or disclosure of data contained on this sheet is 3 subject to the restriction on the cover or title page of this 040 00075 1 document SERVICE MANUAL WORK INSTRUCTIONS 1 0 Recommended tools for replacing the warning light assembly See equipment table above for more details T3MOTION PROPRIETARY INFORMATION Document No Use or disclosure of data contained on this sheet is subject to the restriction on the cover or title page of this 040 00075 document Note For removing the old silicone lf a plastic burnishing tool is not available a simple wooden one can be made from a paint stirring stick yardstick or other soft wood lf those are not available a standard putty knife can be substituted Revision Sheet 1 SERVICE MANUAL 2 0 Warning light assembly 3 0 Unscrew the two Phillips screws holding the warning light in place T3MOTION PROPRIETARY INFORMATION Document No Revision Sheet Use or disclosure of data contained on this sheet is 5 subject to the restriction on the cover or title page of this 040 00075 1 document SERVICE MANUAL 4 0 Carefully cut through the RTV silicone with the knife to release the old warning light from the body Avoid cutting into or scratching the body or paint 5 0 Remove the old light assembly and unplug the connector Note the lock on the bottom that needs to be pressed to rel2. SERVICE MANUAL Document Number SS ee 040 00075 Form Instructions Equipment Equipment Manufacturer List 1 Warning Light Assembly Specify color s when ordering T3 Motion 024 00006 2 Phillips screwdriver Any 3 Utility knife Any 4 Wood or plastic burnishing tool or Putty knife Approx 1 x 3 1 Any 5 RTV silicone sealer Trempro 644 White or equivalent 6 Caulking gun Any Document Description Document Description Reference Docs Related Files Even Mam OOOO T3MOTION INC PROPRIETARY INFORMATION ALL TEXT AND GRAPHICS This document is the sole property of T3MOTION Inc The release of data COMPUTER GENERATED DO contained in this document and the reproduction of this document in whole SHEET 1 of 11 NOT REVISE MANUALLY or in part without the written permission of T3MOTION Inc is prohibited Form 040 00075 Rev 1 SERVICE MANUAL ent frame ewe fy 024 00006 SUB ASSY WARNING LIGHT T3MOTION PROPRIETARY INFORMATION Document No Revision Sheet Use or disclosure of data contained on this sheet is D subject to the restriction on the cover or title page of this 040 00075 1 document SERVICE MANUAL Serious electrical shock can occur if precautions are not followed e ALWAYS TURN OFF POWER BREAKER IN GLOVE BOX AND REMOVE POWER MODULES BEFORE PERFORMING ANY ELECTRICAL WORK Power breaker in glove box Power modules e ALSO SET THE PARKING BRAKE PRIOR TO ANY WORK
3. RVICE MANUAL The light should turn on Proceed to step 8 0 If the light does not work check the connection and check the battery charge levels If light still does not work contact T3 Motion at 714 619 3600 8 0 Install the two Phillips screws that hold the warning light in place Start one side and thread the screw about half way in then thread in the other side They should not bind and you may have to apply slight pressure to the front of the light assembly to make one or both of the holes line up Tighten securely but do not over tighten T3MOTION PROPRIETARY INFORMATION Document No Revision Sheet Use or disclosure of data contained on this sheet is 10 subject to the restriction on the cover or title page of this 040 00075 1 document SERVICE MANUAL 9 0 Apply white RTV silicone around the light Only apply silicone to top of light assembly Finished installation T3MOTION PROPRIETARY INFORMATION Document No Revision Sheet Use or disclosure of data contained on this sheet is 11 subject to the restriction on the cover or title page of this 040 00075 1 document
4. ease the connector T3MOTION PROPRIETARY INFORMATION Document No Revision Sheet Use or disclosure of data contained on this sheet is 6 subject to the restriction on the cover or title page of this 040 00075 1 document SERVICE MANUAL 6 0 Use one of the recommended tools or silicone remover to remove the old silicone around the opening for the light Make sure to clean all the silicone off the body before installing the new warning light T3MOTION PROPRIETARY INFORMATION Document No Revision Sheet Use or disclosure of data contained on this sheet is 7 subject to the restriction on the cover or title page of this 040 00075 1 document SERVICE MANUAL 7 0 Test the new light assembly before installing it FIRST MAKE SURE THE BRAKE IS SET IN THE LOCKED PARKING BRAKE POSITION 7 1 Connect the connector to the light assembly making sure it is attached the same way as the old one was T3MOTION PROPRIETARY INFORMATION Document No Revision Sheet Use or disclosure of data contained on this sheet is 8 subject to the restriction on the cover or title page of this 040 00075 1 document SERVICE MANUAL 7 2 Turn breaker in glove box On 7 3 Turn the power key On 7 4 Turn warning light switch On T3MOTION PROPRIETARY INFORMATION Document No Revision Sheet Use or disclosure of data contained on this sheet is 9 subject to the restriction on the cover or title page of this 040 00075 1 document SE
Download Pdf Manuals
Related Search