CorkSport Mazda 3 LED Light Kit
Contents
1. Part Axm 9 011 va i CorkSport Mazda 3 LED Light Kit 2014 Mazda 3 Thank you for purchasing the CorkSport 2014 Mazda 3 LED Light Kit CorkSport s LED light kit replaces bulbs for the rear dome light vanity visor lights front map light license plate and trunk light The lights simply plug in with no custom adapters or wiring required We hope you enjoy your new interior lighting Please let us know your feedback by submitting a review at http www corksport com corksport led light kit for 2014 mazda 3 html Pre Installation Notes AN Make sure your vehicle is completely cooled down prior to starting installation If you are going to work on your car within an hour or two of having driven it use a fan to cool off the car These instructions were written for reference only and the use of a factory service manual is recommended Please read these instructions thoroughly prior to starting installation OTE _ These installation instructions were written using a 2014 Mazda 3 Other year Mazda 3 models will be similar Materials and Time i Z P General Info gt Tooling List _ Parts List yey Part Axm 9 011 Small flat head screwdriver Four 4 31mm LED bulb pointed ends Time Est 0 5 hours Two 2 T10 Wedge LED bulb Wrench Rating 1 5 Two 2 28mm LED bulb One 1 TS Wedge LED bulb Need Help With Your nstallation Call 360 260 CORK Part Axm 9 011 Detailed Instructions g The2. 360 260 CORK 5 of 5 Part Axm 9 011 What s Next THE ULTIMATE PERFORMANCE GUIDE i2004 MODELS a CORKSPORT 2014 Mazda 3 SkyActiv Power Series Short Ram Intake MAZDA PERFORMANCE The Ultimate Mazda Performance Guide Written with the beginner intermediate enthusiast in mind the Ultimate Mazda Performance guide shows you step by step how to build the Mazda of your dreams With detailed pictures and input from industry experts this guide gives you the latest information available complete with the latest available technologies in the performance market Everything from what to modify and why is covered along with topics such as the history of Mazda styling technical and production facts and where to get the items you want and need From Rotary to SkyActiv the Ultimate Mazda Performance Guide will show you how to get the very most out of your Mazda One of the easiest and most beneficial performance enhancements you can do for your vehicle the CorkSport Power Series Short Ram Intake replaces your factory airbox with an open intake system allowing more air into the intake chamber Engineered with exacting tolerances the CorkSport SkyActiv Short Ram Intake includes our precision machined MAF housing made from billet aluminum a durable dry flow air filter and custom reinforced silicone connector Need Help With Your nstallation Call 360 260 CORK 4of4
3. The opening to find is in behind the cable d Remove the bulb fixture to gain access to the bulb itself Turn the fixture clockwise until it clicks then pull it out gently in e Remove the bulb and replace with a T10 shown with the in If the LED does not work initially then try it again rotated 180 degrees f Repeat steps 5c 5e to change the right side bulb g Re insert the bulb fixtures back into the socket and replace the cover h Pop the plastic fasteners and cover back into place to finish Need Help With Your nstallation Call 360 260 CORK 5 of 7 Part Axm 9 011 6 Replacing the Vanity Mirror Lights Depending on trim package some models do not have vanity lights a Locate the Vanity light in the sun visor Shown in Figure 5a To keep the light from coming on don t open the slide all the way b Remove the cover of the light using a small flat head screw driver Figure 5b shows how the assembly will look once the cover has been removed Notice the light is off with the slide partially open Figure 5a c Replace the factory bulb with a 28mm LED bulb d Repeat Steps 5a 5c for the other vanity light This completes the installation of your interior LED lighting Make sure all the lights are operating properly If not make sure all connections and fuses are good and the LEDs are in the proper orientation Need Help With Yourdnstallation Call
4. if you need to use something to remove the bulb make sure it is non metallic or you may short out a fuse d Install the last 31mm LED in the bulbs place Check to see that it illuminates If it does not turn it around and reinstall it P Face the LED bulbs straight down for maximum brightness or angle them slightly to diffuse the light a little e Replace the cover that was removed in step 3a Slide the non switch side of the cover in first and then push the cover into place It will snap into place easily f For Sedan Start by finding the cargo light in the trunk area It is located in the back of the trunk on top Shown in g Remove trunk light housing from trunk lid by squeezing the two longer sides of the housing and gently pulling down Shown with cover off in h Once the cover has been removed pull the bulb out of the socket Again if you need to use something to remove the bulb make sure it is non metallic or you may short out a fuse c Install the last T5 LED in the bulbs place Check to see that it illuminates If it does not turn it around and reinstall it Shown installed in Need Help With Your nstallation Call 360 260 CORK 3 0f 5 Part Axm 9 011 COHKSPOFC Detailed Instructions 4 Replacing the License Plate Lights Hatch Back a Start by locating the license plate bulb covers shown with red arrows in Figure 4a They are located on the rear hatch above the license plate b Agai
5. erhead Interior Light a Start by gently prying out the light cover with a small flat head screw driver There is a small indentation in the clear plastic lens that is there for this purpose in b Pull the bulb out of the socket circled in If you need to use something to remove the bulb make sure it is non metallic or you may short out a fuse c Install one of the supplied 31mm LED s in the bulbs place shown in Check to see that it illuminates If it does not turn it around and reinstall it Face the LED bulbs straight down for maximum brightness or angle them slightly to diffuse the light a little d Replace the cover that was removed in the step 2a Slide the front of the cover in first and then push the cover into place It will snap into place easily 3 Replacing the Trunk and Cargo Area Light There are two bulbs included one for Sedan T5 and one for hatchback 31mm Festoon a For hatchback Start by finding the cargo light in the trunk area It will have a switch on it pictured in The switch is located on the drivers side of the car b Again with a small flat head pry the light out starting on the switch side as shown with the in Need Help With Your Installation Call 360 260 CORK 2of5 Part Axm 9 011 Detailed Instructions 3 Replacing the Trunk and Cargo Area Light continued c Once the light has been removed pull the bulb out of the socket circled in Again
6. n with a small flat head remove the cover Insert the screw driver into the tab on the lens and slide the y 2 lens to one side while pulling slightly Slide direction of WIFI RIVEN COD drivers side shown with a red arrow in Figure 4b passenger side direction will be opposite Both will AAN NERA slide towards the center of the car Figure 4a riven com z rl c Once the cover is off pull the bulb out bulb shown in Figure 4c It should be snug in the socket but it will come out by hand Figure 4b Figure 4c d Install one of the supplied round T10 wedge type LEDs in the bulbs place Check to see that it illuminates If it does not pull it out and flip it around d Replace the cover that was removed in step 4a Slide one side in first and then the other will snap into place as you press down e Repeat steps 4a 4e for the second license plate light bulb Need Help With Your nstallation Call 360 260 CORK 4of5 Part Axm 9 011 Detailed Instructions 5 Replacing the License Plate Lights Sedan a The lights are only accessible through the inside of the trunk lid Using a flat head remove 4 of the plastic fasteners in that hold the trunk lid lining b Again with a flat head remove the hand grip cover Pry up the side of the cover then pull it out Shown in with the c Pull the cover loose to reach the openings The cover will slide over the rubber bumpers and the lathing mechanism
7. se instructions are made for a 2014 Mazda 3 1 Replacing the Front Overhead Interior Lights LED Bulbs will only work when installed in one direction Test each bulb in the socket during installation If it does not work simply remove it turn it around and reinstall it Be careful when prying the covers off the factory bulb locations They should come off easily If they are hard to come off make sure you are prying in the correct orientation a Start by removing the light cover Use a small flat head screwdriver to pry the front side of the cover It will not take much effort The cover will then come right off shown in b km Pull the bulb out of the socket circled in If you need to use something to remove the bulb make sure it is non metallic or you may short out a fuse c Install one of the supplied 4 LED Festoons in the bulbs place circled in Check to see that it illuminates If it does not turn it around and reinstall it P Face the LED bulbs straight down for maximum brightness or angle them slightly to diffuse the light a little d Replace the cover that was removed in step 1a Slide the back of the cover in first and then push the cover into place shown in It will snap into place easily e Repeat steps 1a 1d for the bulb on the other side Need Help With Your Installation 1of5 Call 360 260 CORK Part Axm 9 011 Detailed Instructions 2 Replacing the Rear Passenger Ov
Download Pdf Manuals
Related Search