Home

2015-Present

1. 14 SAFETY FIRST We care about YOU Please always wear your safety glasses and protective gloves when servicing SRAM products Protect yourself Wear your safety gear Wheel Build and Spoke Replacement We recommend that you have your SRAM Wheels serviced by a qualified bicycle mechanic This portion of the service guide covers general wheel build and spoke replacement There are many different methods for measuring spoke tension The following information provides the final spoke tension you should achieve using your preferred method for spoke tensioning For the latest technical information along with exploded diagrams and part number information available in the Spare Parts Catalog please visit our website at sram com For order information please contact your local SRAM distributor or dealer Information contained in this publication is subject to change at any time without prior notice Parts and Tools Needed for Service Safety glasses Tensiometer with conversion chart e Bladed spoke adjustment tool ex Park Tool BSH 4 e Truing stand Internal nipple wrench with a 5 5 mm hex socket Wheel Model Chart Spoke length Final spoke tension Wheel Spoke 26 inch 275 inch 29 inch Drive side Ne De model count wheel size wheel size wheel size Front 85 kgf 10 kgf 110 kgf 20 kgf wheel Rise XX 296 mm Rear N A wheel Rise XX Front Predictive 294 mm wheel Steering N A Front wheel Rise 60 273 mm Rear whe
2. View from rear drive side Rear Wheel Lacing 10 Continue tightening both drive side and non drive side spokes in 1 8 1 4 turn increments until you achieve the final spoke tension in the Wheel Model Chart and the wheel is round and true Rear Wheel Lacing 11 Tubeless Rim Tape We recommend that you have your SRAM wheels serviced by a qualified bicycle mechanic Servicing SRAM products requires knowledge of bicycle components as well as the special parts and tools used for service For the latest technical information along with exploded diagrams and part number information available in the Spare Parts Catalog please visit our website at sram com For order information please contact your local SRAM distributor or dealer Information contained in this publication is subject to change at any time without prior notice Your product s appearance may differ from the pictures diagrams contained in this publication Parts and Tools Needed for Service Rise and Roam rims 26 mm rim tape Wheel truing stand Rail rims 28 mm rim tape Isopropyl alcohol Nitrile gloves Small flashlight e Apron e Small knife Clean lint free rags Scissors Tubeless Rim Tape Installation 7 Remove any existing rim strips or rim tape from the rim Remove the valve stem Install the wheel into a truing stand Thoroughly clean the rim with isopropyl alcohol and a clean rag Make sure that the rim is dry and free of alcohol Spin t
3. SRAM LLC WARRANTY EXTENT OF LIMITED WARRANTY Except as otherwise set forth herein SRAM warrants its products to be free from defects in materials or workmanship for a period of two years after original purchase This warranty only applies to the original owner and is not transferable Claims under this warranty must be made through the retailer where the bicycle or the SRAM component was purchased Original proof of purchase is required Except as described herein SRAM makes no other warranties guaranties or representations of any type express or implied and all warranties including any implied warranties of reasonable care merchantibility or fitness for a particular purpose are hereby disclaimed LOCAL LAW This warranty statement gives the customer specific legal rights The customer may also have other rights which vary from state to state USA from province to province Canada and from country to country elsewhere in the world To the extent that this warranty statement is inconsistent with the local law this warranty shall be deemed modified to be consistent with such law under such local law certain disclaimers and limitations of this warranty statement may apply to the customer For example some states in the United States of America as well as some governments outside of the United States including provinces in Canada may a Preclude the disclaimers and limitations of this warranty statement from limiting the statutory
4. at an angle into each of the countersunk holes of the non drive side and drive side hub flange Rotate the spoke so the head inserts under the tab and into the slot Pull the spoke tight against the inside of the tab Slotted hub 3 Install a spoke nipple into the 5 5 mm internal nipple wrench ce Carbon Rims Install a washer onto the spoke nipple TIN Alloy rim Locate spoke hole 1 on the spoke bed Insert the end of the spoke nipple into spoke hole 1 and guide the spoke nipple and washer carbon rims only into the spoke hole and the end of the spoke nipple out of the inner wall of the rim View from non drive side 5 Align the SRAM logo on the hub with the valve stem hole in the rim View from front non drive side Thread the end of spoke 1 into the spoke nipple Continue to thread the spoke into the nipple until no threads are showing on the spoke 7 Repeat steps 4 amp 6 following the illustrated lacing pattern to finish installing the remaining 23 spokes View from front non drive side Use a spoke wrench or an internal nipple wrench to turn each of the drive side spokes in 1 2 turn increments until the drive side spoke tension is at approximately 30 40 of the final value according to the Wheel Model Chart Install the wheel into a truing stand Use a spoke wrench to turn each of the the non drive side spokes in 1 2 turn increments to increase the spoke tension until the n
5. Aero bar pads e Rubber moving parts Chains Wheel braking surfaces Corrosion Foam rings Sprockets Bottomout pads Tools Rear shock mounting hardware Cassettes Bearings Motors and main seals e Shifter and brake cables inner Bearing races Batteries Upper tubes stanchions and outer Pawls Notwithstanding anything else set forth herein the battery pack and charger warranty does not include damage from power surges use of improper charger improper maintenance or such other misuse This warranty shall not cover damages caused by the use of parts of different manufacturers This warranty shall not cover damages caused by the use of parts that are not compatible suitable and or authorised by SRAM for use with SRAM components This warranty shall not cover damages resulting from commercial rental use TABLE OF CONTENTS Wheel Build and Spoke Replacement 1 2 ee eeeeeeeeheuanuauuuuauauuu una RR RR manne SRRSARRASRRRSRSRRSRSSRSRRSARRRSRSSRSRRSRSRRSRSRRSRRRRSRRSARRRSRSRRSRRRA 5 Parts and Tools Needeq for SerViCe eR O O 5 WheelModel Charte ocina RE ee 5 SO SSI E O O O T 6 Pa Fe Ea lio mmm 9 IubDe iess Rim TAPE 12 Parts and Tools Needeq for SerViCe m m uu 12 Tubeless Rim Tape AS TASER de 12 Valve OS OO O
6. Y This warranty does not apply to products that have been incorrectly installed and or adjusted according to the respective SRAM user manual The SRAM user manuals can be found online at sram com rockshox com avidbike com truvativ com or zipp com This warranty does not apply to damage to the product caused by a crash impact abuse of the product non compliance with manufacturers specifications of usage or any other circumstances in which the product has been subjected to forces or loads beyond its design This warranty does not apply when the product has been modified including but not limited to any attempt to open or repair any electronic and electronic related components including the motor controller battery packs wiring harnesses switches and chargers This warranty does not apply when the serial number or production code has been deliberately altered defaced or removed This warranty does not apply to normal wear and tear Wear and tear parts are subject to damage as a result of normal use failure to service according to SRAM recommendations and or riding or installation in conditions or applications other than recommended Wear and tear parts are identified as Dust seals e Stripped threads bolts aluminium Handlebar grips Transmission gears e Bushings titanium magnesium or steel e Shifter grips e Spokes Air sealing o rings Brake sleeves Jockey wheels Free hubs Glide rings Brake pads Disc brake rotors
7. cessed side facing the rim onto the valve stem This will allow the o ring to seal against the nut and prevent air from leaking out of the wheel This concludes the Wheel Lacing and Tape Installation service Install the tire according to the manufacturer s instructions Visit SRAM Tech s YouTube Channel to view the video Valve Stem Installation 14 Sa FS FEN BR WWW Sram com GEN 0000000004907 Rev B 2015 SRAM LLC
8. el Rise 60 Front Predictive N A 298 mm i wheel Steering 24 Front wheel Roam 60 266 MM 280 mm Rear wheel 110 kgf 20 kof 85 kgf 10 kof 1078 N 196 N 833 N 98 N 85 kgf 10 kgf 110 kgf 20 kof 833 N 98 N 1078 N 196 N 85 kof 10 kof 110 kgf 20 kof 855 N E98 N 1078 N 196 N NO kgf 20 kgf 85 kgf 10 kgf 1078 N 196 N 833 N 98 N 85 kgf 10 kgf 110 kgf 20 kof 833 N 98 N 1078 N 196 N 90 kgf 15 kgf NO kof 15 kof 883 N 147 N 1078 N 147 N 110 kgf 15 kof 82 kof 15 kgf 1078 N 147 ND 804 N 147 N 90 kof 15 kof 110 kgf 15 kof 883 N 147 N 1078 N 147 N 110 kgf 15 kof 82 kgf 15 kgf 1078 N 147 N 804 N 147 N 833 N 98 N 1078 N 196 N Front wheel 264 mm 276 mm 294 mm Rear wheel Front wheel 270 mm 26 mam Rear 500 mm wheel Front Roam 40 Roam 30 Roam 50 Rail 50 Roam 50 Predictive Steering 90 kof 215 kgf NO kgf 15 kgf 88S N 147 N 1078 N 147 N 110 kgf 15 kof 82 kof 15 kgf 1078 N 147 N 804 N 147 N 90 kof 15 kof 110 kgf 15 kof 883 N 147 N 1078 N 147 ND Wheel Build and Spoke Replacement 5 2 Refer to the Wheel Model Chart for the correct spoke length used on the front drive side and non drive side of your wheel Straight pull hub Install a spoke into each of the countersunk holes of the non drive side and drive side hub flange Straight pull Slotted hub Install a sooke
9. he wheel rapidly in the stand to help remove alcohol from the spoke holes 2 Apply the beginning section of tape between the two spoke holes that are 180 degrees opposite from the valve stem hole Press 4 5 inches 10 13 cm of tape into the channel of the tire bed Tubeless Rim Tape 12 3 Apply tension to the tape by rotating the wheel away from you while rapidly shaking the tape from side to side about 2 35 inches 5 8 cm This will seat the tape into the channel and keep it centered in the rim NOTICE The tubeless tape must be seated into the channel to create an air tight seal If the tape is not seated into the channel the tire may leak air 4 Continue the process of rotating the wheel and shaking the tape side to side while keeping an even tension on the tape roll until the tape meets the beginning edge of tape from step 2 Overlap the beginning edge with another 12 inches 31 cm of tape to the wheel 5 Cut the tape Use your fingers or a tire lever to press the leading edge of tape against the rim This will help prevent sealant from getting under the tape Tubeless Rim Tape Installation 13 Valve Stem Installation 1 Shine a flashlight through the rim to illuminate the valve stem hole Use a small knife to cut the tape from the valve stem hole 2 Remove the nut and o ring from the valve stem Insert the valve stem through the rim Install an o ring onto the valve stem Thread the nut with the re
10. ocate spoke hole 1 on the spoke bed Insert the end of the spoke nipple into spoke hole 1 and guide the spoke nipple and washer carbon rim only into the spoke hole and the end of the spoke nipple out of the inner wall of the rim o Direction of wheel cotation View from rear drive side Carbon rim Align the SRAM logo on the hub with the valve stem hole in the View from front non drive side Rear Wheel Lacing 9 Z rim Thread the end of spoke 1 into the spoke nipple Continue to thread the spoke into the nipple until no threads are showing on the spoke Repeat steps 4 amp 6 following the illustrated lacing pattern to finish installing the remaining 23 spokes Use a spoke wrench or an internal nipple wrench to turn each of the drive side spokes in 1 2 turn increments until the drive side spoke tension is at approximately 30 40 of the final value according to the Wheel Model Chart Install the wheel into a truing stand Use a spoke wrench to turn each of the the non drive side spokes in 1 2 turn increments to increase the spoke tension until the non drive side spoke tension is at approximately 30 40 of the final value according to the Wheel Model Chart Continually check for roundness vertical movement and trueness side to side movement Control the wheel roundness by tightening loosening the drive side spokes Control the wheel trueness by tightening loosening the non drive side spokes CN
11. on drive side spoke tension is at approximately 30 40 of the final value according to the Wheel Model Chart Continually check for roundness vertical movement and trueness side to side movement Control the wheel roundness Front Wheel Lacing 7 by tightening loosening the drive side spokes Control the wheel trueness by tightening loosening the non drive side spokes Continue tightening both drive side and non drive side spokes in 1 8 1 4 turn increments until you achieve the final spoke tension in the Wheel Model Chart and the wheel is round and true Rear Wheel Lacing Position the rear wheel rim so the deep section of the rim is facing up and the driver body of the hub drive side of the hub are also facing up 2 Refer to the Wheel Model Chart for the correct spoke length used on the front drive side and non drive side of your wheel Straight pull hub Install a sooke into each of the countersunk holes of the non drive side and drive side hub flange Straight pull Slotted hub Slotted hub Install a sooke at an angle into each of the countersunk holes of the non drive side and drive side hub flange Rotate the spoke so the head inserts under the tab and into the slot Pull the spoke tight against the inside of the tab Deep section Shallow section Carbon rim Install a sooke nipple into the 5 5 mm internal nipple wrench Carbon rims only Install a washer onto the spoke nipple L
12. rights of the consumer e g United Kingdom b Otherwise restrict the ability of a manufacturer to enforce such disclaimers or limitations For Australian customers This SRAM limited warranty is provided in Australia by SRAM LLC 1333 North Kingsbury 4th floor Chicago Illinois 60642 USA To make a warranty claim please contact the retailer from whom you purchased this SRAM product Alternatively you may make a claim by contacting SRAM Australia 6 Marco Court Rowville 3178 Australia For valid claims SRAM will at its option either repair or replace your SRAM product Any expenses incurred in making the warranty claim are your responsibility The benefits given by this warranty are additional to other rights and remedies that you may have under laws relating to our products Our goods come with guarantees that cannot be excluded under the Australian Consumer Law You are entitled to a replacement or refund for a major failure and for compensation for any other reasonably foreseeable loss or damage You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure LIMITATIONS OF LIABILITY To the extent allowed by local law except for the obligations specifically set forth in this warranty statement in no event shall SRAM or its third party suppliers be liable for direct indirect special incidental or consequential damages LIMITATIONS OF WARRANT

2015-Present

Contents

Download Pdf Manuals

Related Search

Related Contents