EC-1700_manual
Contents
1. aid ses RM OFF 32 How to Combine Air massage with Mecha knead balls Massage To combine mecha knead balls massage while in air massage Press the button A list of all the functions is displayed FUJIIRYOKI NECK RELAX KNEAD DOWN EXTREME KNEAD EXTREMETAPPTH S ROLLING gt WAIST E STRETCH E 3D I eni button Select _ then ME Select a desired function with the button or the button and press the button To select WAIST STRETCH or 3D move the cursor on WAIST STRETCH or 3D press the button or the c button select a desired function with the button LENG or the button and then press the button HEIGHT ADJUSTMENT FOOTREST RECLINER a m 4 NECK RELAX EXTREME KNEAD ENEAD MATS T TAPPING MATS T EXTREME TAPE UP e B STRETCH AVELET Select 9 then NECK RELAX EXTREME BEAL EXTREMET APPIN SRE ROLLING DOWN WAIST El erm rappING ika WAVELET W Select 6793 then 33 How to Combine Air massage with Mecha knead balls Massage In case of having selected NECK RELAX EXTREME KNEAD EXTREME TAPPING and ROLLING set the shoulder position first At the same time the back2. KNEAD UP INECKRELAX KNEAD WAIST KNEAD DOWN JEXTREMEKNEAD TAPPING WAIST DEEP KNEAD UP J EXTREME TAPPING STRETCH STRETCH KNEAD UP STRETCH TAPPING WAVELET STRETCH STRETCH WAVELET 3D KNEAD UP 3D KNEAD DOWN 3D TAPPING 3D WAVELET HEIGHT ADJUSTMENT button Finely adjust the shoulder position while in massage of any Auto mode course or when fixing the shoulder position in the process of selecting any function The knead balls can be repositioned in the process of selecting any function When the knead balls are positioned around shoulders or back in any Auto mode course a display for finely adjusting the SHOULDER position comes out When they are around waists a display for finely adjusting the WAIST position comes out Fine adjustment function of the WAIST position is available only for EXTREME KNEAD WAIST and EXTREME TAPPING WAIST RECLINER A V button Adjust an angle each of the backrest and the footrest The footrest moves in link with the backrest While in reclining the movements of AIR TAPPING and WAVELET do not function RESET button Store the backrest and the footrest The backrest does not go up completely Before Starting Massage Power Connect the power cord plug with the receptacle c Power ON The power switch is behind the left armrest e After power ON the LCD
3. STRETCH KNEAD UP STRETCH TAPPING and STRETCH WAVELET FUNC ADJUSTMENT WB SLO WIOTH LARGE Select 679 then To adjust mecha knead balls massaging width Press the env button select WIDTH with the button select NARROW NORMAL LARGE the button and press the button This function is available for TAPPING SHIATSU ROLLING STRETCH STRETCH TAPPING and SD TAPPING FUNC ADJUSTMENT SPEED SLOW GLO FAST EH HARRON LARGE PART PART WHOLE W Select 73 then 28 How to Use Air massaging Functions Introductory Note e After power on the LCD in the initial stage displays the screens as shown on the right side alternately e When changing an air massage option to another air massage option or when changing Auto mode course to any air massage option see Page 37 e When combining mech massage with air massage see Page 32 FUJIIRYOKI RECLINER FOOTREST SOLUM ION Press the button The footrest automatically comes up to the standby position Press the button to interrupt this movement The standby screen comes out Press ONJOFF Select 6_3 then Press the button Or select AIR with the button and press the button A list of all the functions is displayed Even if the but
4. Meck relax Knead up Knead dewr Extreme tappi Stretch knead ip Knead up Final Neck relax canditioning Knead down Stretch Wavelet 4 y Stretch Knead up Final wavelet Knead down conditioning Extreme knead Extreme tapping Knead up Wavelet B i j 5 gt 4 Knead up Stretch Final Knead down wavelet conditioning Waist hip Knead down Rolling Extreme Tapping tapping waist LT dihati IN Shiatsu Final Extreme knea conditioning Knead up Wavelet Stretch Knead PT iH 17 How to Adjust during Massaging with Auto Mode Course To adjust MECHA STRENGTH mecha massage Press the FUJIIRYOKI strength Press the RECLINER FOOTREST with the knead balls button for adjustment and press the button e MECHA STRENGTH is adjustable in 7 steps e Strength is initially set at the step 4 COURSE STRENGTH QUOD Select 73 then To adjust AIR STRENGTH air massage button for adjustment and press the button AIR STRENGTH is adjustable in 5 steps e Strength is initially set at the step 3 AIR STRENGTH 5 SE Select 6_3 then To adjust the shoulder position and the knead ball position When the knead balls are positioned around shoulders or back press the H
5. EXTREME APP STRETCH UP FA B STRETCH TAPPING STRETCHIIAVELET Select then Select 73 then Select 73 then 3 In case of having selected NECK RELAX EXTREME KNEAD EXTREME TAPPING and ROLLING set the shoulder position first At the same time the back and forth position of the knead balls can be adjusted only when either NECK RELAX EXTREME KNEAD or EXTREME TAPPING is selected Press the button or the HEIGHT ADJUSTMENT or Y to Shoulder set the shoulder position adit Press the button to set RECLINER the back and forth position of the knead balls To select EXTREME KNEAD WAIST or EXTREME One scale about 2mm TAPPING WAR T cise ooo waist position first The waist position can be adjusted with the button or the A or v button Select ROLLING first Then RAA Adjust waist position select one of the functions of KNEAD UP KNEAD DOWN One scale about 12mm DEEP KNEAD UP DEEP KNEAD DOWN TAPPING WAVELET SHIATSU RUBBING STRETCH 3D You can have massage of ROLLING combined with one of these functions 24 How to Use the Mecha knead balls Massage Functions 4 The function selected starts KNEAD UP DE 4 FUJIIRYOKI TD Change the s
6. U O O U 0 2 U gt FUJIIRYOKI CYBER RELAX EC 1700 USER MANUAL For Home Use Be sure to read this manual thoroughly in order to ensure proper use In particular make certain to read the section IMPORTANT SAFETY INSTRUCTIONS Keep this manual in safe place so that it can be found easily FUJI MEDICAL INSTRUMENTS MFG CO LTD Contents IMPORTANT SAFE IY INSTRUC HONS aaa 1 BOITO MIG 5 and Functions of 1 lt 8 Before staring WA SS AO EE 10 11 How to Use the Auto Mode Course ccccccccccccsscccseeceeeseeeceeeceeceueeseeeseeseesaeeseaeseeseaeeees 13 How to Adjust during Massaging with Auto Mode 18 Basic viassaging TIOVElTIeTilS oeque O caer ue E I EA eee tee 22 How to Use the Mecha knead balls Massage Functions 23 How to Adjust during the Movement of Mecha knead balls Massage Functions 26 How to Use Air massaging Functions e aaa e aaa aaa a aaa a seca 29 How to Make Adjustment while in Air massage eeaaa aaa aaa cece eeeeeeeseeeeeseeeaeeseeeees 30 How to Combine Air
7. MASSAGING POSITION Massaging space covered by the mecha massage knead balls Power switch um Turn OFF after use WEF 1 A X 8 Www NNNM W _ M 0 COMER eZ f xs ZEE SET SSS SS d Power supply fuse q Power Power cord plug Caster REMOTE CONTROLLER LCD display Various functions are available ON OFF button Start or stop massage and store the knead balls Auto mode course button Ten Auto mode course are available in combination of massaging positions and massage types AIR button Two air massage options are available LEG THIGH HIP REPEAT button Repeatedly continue the current option selected from the Auto mode course SKIP button Discontinue the current option and change into another Auto mode course button Adjust the current option Cross Key Select any option in various functions ENTER button Determine any option FOOTREST A Y button Adjust an angle of the footrest Air does not function while the footrest goes up or down Name and Functions of Components STOP button Discontinue any in progress movement Press this button when you have to discontinue massage at once FUNCTION button Select any one out of 23 massaging options WAIST HIP MASSAGE
8. and forth position of the knead balls can be adjusted only when either NECK RELAX EXTREME KNEAD or EXTREME TAPPING is selected FUJIIRYOKI Shoulder Press the button or the Adjustment sk HEIGHT ADJUSTMENT 4 Jor Y to set the shoulder position Press the button to set the back and forth position of the knead balls One scale about 2mm In case of having selected Gne gale dom EXTREME KNEAD WAIST or EXTREME TAPPING WAIST set the waist position Press the button or the HEIGHT ADJUSTMENT or v to set the waist position Select ROLLING Then select Adust waist position 2 either KNEAD UP KNEAD One scale about 12mm DOWN DEEP KNEAD UP DEEP KNEAD DOWN TAPPING WAVELET SHIATSU RUBBING STRETCH or 3D You can have massage of ROLLING combined with one of these functions RECLINER FOOTREST 3 The function selected starts KNEAD UP D Strength 4 3 Si renstn 3 DU EB gt 3 Change the set up Change the set u TEM with menu Button with men button 2 To adjust massaging functions see the following instructions As to How to Adjust during the Movement of Mecha knead balls massage functions see Page 26 FUNC AIR OPTION As to How to Make Adjustment while m i
9. around the waists EXTREME KNEAD WAIST Knead around waists sufficiently EXTREME TAPPING WAIST Rhythmically tapping around the waists sufficiently STRETCH Push the back from bottom and stretch it out STRETCH KNEAD UP Push muscles from bottom and relieve them STRETCH TAPPING Muscles are tapped repeatedly rhythmically and pushed from bottom STRETCH WAVELET With the fine combination of knead and tapping muscles are pushed up from bottom 3D KNEAD UP Relieve muscles from bottom to top in combination with stereoscopic back and forth movements 3D KNEAD DOWN Relieve muscles from top to bottom in combination with stereoscopic back and forth movements 3D TAPPING Relieve muscles with rhythmical tapping in combination with stereoscopic back and forth movements 3D WAVELET Massages with stereoscopic back and forth movements in addition to fine movements of knead and tapping PULSE Massage in quick pulsation at a high frequency with the air bag inflated COMBO FOOTREST Massage the calves simultaneously with other regions FOOT STRETCH Stretch feet with the footrest going downward and massage the calves and thighs with the inflated air bag behind 22 How to Use the Mecha knead balls Massage Functions Introductory Note After power on the LCD in the initial stage displays the screens as shown on the right side alternately e When changing a mecha massage option to SOLUTION another mech
10. button e The backrest is raised by about 132 and the footrest comes backward down to the lowest position The RESET function is available only when the LCD is in an initial stage The backrest does not move up completely stopping halfway To raise it up completely press the RECLINER 4 button 12 How to Use the Auto Mode Course Introductory Note After power on the LCD in the initial stage displays the screens as shown on the right side alternately e When changing an Auto mode course S O LIT ION to another Auto mode course or when changing non Auto mode course massage to any Auto mode course see Page 35 Press ON OFF Press the cevor button The footrest automatically comes up to the standby position Press the stoP gt button to interrupt this movement The standby screen comes out Be deeply seated on the chair and recline yourself slowly with your head on the backrest FUJIIRYOKI Select 673 then p Press the ro button Or e AUTO with button and press the Gra button All of the Auto mode course are displayed Even if the button remains not to be pressed this function starts 5 seconds later The same holds good of this procedure RE TMT ATE REFRESH RELAX Select 679 then 3 Select a desired course with the button or the button and press the button e Select one out of the four
11. is completed the knead balls automatically return to the stored position Auto mode course Storing FUJIIRYOKI Finished c After use turn the power switch OFF This step prevents the chair from starting movement even with the remote controller operated inadvertently CAUTION After use be sure to turn the power switch OFF Misuse by a child may cause accident To discontinue massage immediately Press the button The knead balls stop movement at the present position The standby screen comes out HEIG A ADJUSTMENT v FOOTREST RECLINER 4 m OE Select 67 then To stop massage halfway Press the button The knead balls move to the stored position With the knead balls stored the initial display comes out on the LCD Press ON OFF Storing SOLUTION 16 How to Use the Auto Mode Course For your information What is POINT NAVI POINT NAVI is a function available only in the Auto mode course which measures your body shape and posture before massage is started With your contour back line in memory effective massage can be given What options are available in the Auto mode course Ten options are selectable in the Auto mode course in combination of body regions and massaging modes WAIST course Approx 15 mi
12. like Uae eel Turn the power switch OFF stops behind the armrest and then halfway turn it ON The remote Is there any load given to the Raise your body off the controller knead balls backrest turn the power does not Should there be any load switch OFF behind the work given to the knead balls a armrest and then turn it ON safety mechanism works to To restart press any function stop all the functions button The Is the power cord plug Connect the power cord plug 11 12 13 backrest connected with the receptacle a cannot be Is the backrest in touch with Move the chair away from the reclined the wall or the like wall or the like Service receptacle Is the power supply fuse Replace the fuse 9 cannot use turned OFF 41 Trouble shooting Attention When part of your body or something is pinched by accident between the knead balls and the seat while in massage or while the knead balls Protect function are moving the protect function runs The knead balls go up a little and then stop Atthis stage displayed on the LCD is the following message Bichon Power Protect function Switch on Power then Eliminate the causal then ms factors and following this instruction turn the power switch OFF and ON The following message may be displayed on the LCD ERROR Switch on Power then In this case following this instruction turn the power switch OFF and ON S
13. the button select either or OFF also with the button and then press the button e Both COMBO FOOTREST and FOOT STRETCH functions do not work at the same time e COMBO FOOTREST is initially set at OFF e With FOOT AIR OFF tun COMBO FOOTREST ON Then FOOT AIR is also turned ON AIR OPTION AIR OPTION Select 673 then Select 673 then 30 How to Make Adjustment while in Air massage To turn FOOT STRETCH ON or OFF Press the button Select FOOT STRETCH with the button select either ON or OFF also with the O button and then press the button e FOOT STRETCH is initially set at OFF e Both FOOT STRETCH and COMBO FOOTREST functions do not work at the same time e When legs are not Air massaged turn FOOT STRETCH ON Then Air massage for legs is started FUJIIRYOKI AIR OPTION IR OPTION COMED FOOTREST STRETCH OFF COME FOOTREST Select 673 then 129 Select 5 then mp IN When the function selected is completed a message 35 4 Storing is displayed RECLINER Storing FOOTREST After use turn the power switch OFF This step prevents the chair from starting movement even with the remote controller operated inadvertently CAUTION After use be sure to turn the power switch OFF Misuse by a chi
14. EIGHT ADJUSTMENT 4 or v buttons and press the button e The shoulder position is adjustable with the HEIGHT ADJUSTMENT A Or v buttons pressed once and then even with the button pressed as well At this time the knead balls can be moved forward or backward with the button for adjustment Massage is made with the knead balls at the position adjusted for RELAX NECK EXTREME KNEAD or EXTREME TAPPING in the Auto mode courses This massage is available only for the REJUVENATE course of WHOLE BODY and SHOULDER courses 18 KNEAD UP Mext kMEan DOWN V m Si 3 E rios Shoulder Adjustment 7 E Around shoulders One scale about 2mm or back One scale about 12mm How to Adjust during Massaging with Auto Mode Course To adjust the EXTREME KNEAD WAIST or EXTREME TAPPING WAIST positions When the knead balls are positioned around waists press the HEIGHT ADJUSTMENT 4 or 7 buttons and press the button The waist position is adjustable with the HEIGHT ADJUSTMENT A Jor v buttons pressed once and then even with the button pressed as well FUJIIRYOKI Massage is made with the knead balls at the position adjusted for EXTREME KNEAD WAIST or EXTREME TAPPING WAIST in the Auto mode course This massage is available only for the REJUVENATE course of WHOLE BODY an
15. Generic name Electric massage chair for home use Power supply 50 60 Hz Varies from country to country 30 min 115 W AC110V 120V 220V 230V 240V Rated time Power consumption 50 60 Hz Rated voltage Mechanical Knead 3 step adjustment approx 20 30 cycles min knead balls massage speed Tapping 3 step adjustment approx 270 650 cycles min Approx 4 9 cm sec Approx 36kPa Up and down Air pressure for air massage Mecha knead balls massage strength step adjustment Air massage strength o step adjustment Auto timer Approx 15 min Approx 120 170 Footrest Approx 0 75 Backrest not reclined 710 W x 1 180 D x 1 200 H mm Dimensions Backrest reclined 710 W x 1 780 D x 720 H mm Weight Approx 79kg Cover cloth PVC leather Do not use the massager on other than the designated voltage m Backrest Reclining angle Nation Voltage Taiwan 110V Canada 120V USA 120V Hong Kong 220V India 220V Italy 220V Russia 220V Sweden 220V Thailand 220V Turkey 220V Czech 230V UK 230V Finland 230V France 230V Germany 230V Greece 230V New Zealand 230V Singapore 230V Malaysia 240V MEMO 44 MEMO 45 FUJIIRY OKI FUJI MEDICAL INSTRUMENTS MFG CO LTD 09 05
16. When changing an air massage option to another air massage option the timer function is in continuation e When changing an Auto mode course to an air massage option the timer is reset at this time and the massage continues for 15 more minutes After 30 consecutive minutes the massage stops 3 Other Functions Introductory Note In the initial stage after power on the following screen are displayed alternately on the LCD display FUJIIRYOKI Press ON OFF SOLUTION For Child lock on The Child lock on function is useful to preventing children from doing erroneous operation It disables all the functions of buttons CD In the initial stage press both the Giran and buttons at the same time for 2 seconds The buzzer beeps and the Child lock on screen appears on the display This message is on display while the remote controller is under the Child lock on conditions To release the Child lock on take the same procedure of the above or turn the power switch OFF Child lock on RECLINER FOOTREST c To turn ON the Backlight When you cannot read the remote controller LCD in darkness turn ON the Backlight CD In the initial stage press the env button for 2 seconds The buzzer beeps and the Backlight is turned ON To turn OFF the Backlight take the same procedure of the above or turn the power s
17. a massage option or when changing Auto mode course to any mecha massage option see Page 36 e When combining air massage with mecha massage see Page 33 Fress ONJ OFF Press the button The footrest automatically comes up to the standby position Press the button to interrupt this movement The standby screen comes out FUJIIRYOKI Select 673 then Press the button Or select FUNCTION with the button and then press the button A list of all the functions is displayed Even if the button remains not to be pressed this function starts 5 seconds later The same holds good of this procedure FOOTREST RECLINER a m 4 DB kMEnn UP LA EXTREME KNEAD EXTREME TAPPING ROLLING WAIST STRETCH E Select 5 then 23 How to Use the Mecha knead balls Massage Functions Select a desired function with the button or the co button and press the button To select WAIST STRETCH or 3D move the cursor on WAIST STRETCH or 3D press the O button or the button select a desired function with the button or the button and then press the button FUJIIRYOKI NECK RELAX EXTREME ENTREMETAPPIN ETERNI ROLLING mean DOWN WAIST Ell ep TAPPING ista SD WAVELET RELAX NECK RELAY EXTREME FMEA
18. ble or repair the massager Otherwise it may result in a cause of fire electric shock or injury 24 1 The following persons should not use the chair for fear of the possible occurrence of physical disorder e Those who are advised by a physician not to get a massage for example those with thrombosis embolism severe aneurysm acute varicosity dermatitis or skin infections including inflammations of subcutaneous tissue 2 The following persons should consult a physician before use e hose having a medical electronic device embedded in the body such as a pace maker susceptible to the electromagnetic interference e Those with malignant tumors e Those with heart diseases e Those under unstable conditions of pregnancy or after childbirth e Those with sensory disturbance caused by peripheral vascular disorder such as diabetes e hose with injuries e hose in need of repose e Those with a body temperatures of 38 C or more in pyrogenetic condition for example at the time of the manifestation of acute inflammatory symptoms such as malaise chill anisopiesis or when under weak conditions e Those with osteopolosis fractured vertebra or acute pains e Those with abnormality in the backbone vertebra or with the backbone bent to left or right e Those with inflammatory diseases such as sprain or muscle strain e hose with herniated disk e Those with any abnormality on the body or under medical treatment 25 If
19. courses of SHOULDER WHOLE BODY WAIST and FOOTREST RECLINER REJUVENATE REFRESH RELAX Select 6793 then 13 How to Use the Auto Mode Course The course name selected is displayed When the Auto mode course starts a process of detecting your body shape also starts When the 7MIN course is selected the process of detecting your body shape is not taken FUJIIRYOKI SHOULDER REFRESH COURSE 5 In the process of detection the detection points are lighted up and the detection levels each of the points are indicated with the detection indicator e When nobody is seated on the chair or when nothing can be detected a message CANNOT DETECT BODY SHAPE comes out on the LCD In this case press the button again and try to detect the body shape again SHOULDER REFRESH COURSE CANNOT DETECT BODY SHAPE During POINT NAVI Press again DR FOOTREST RECLINER a m 4 080 With the body shape detection completed the knead balls move to the shoulder position as determined Should you feel the shoulder position not in good fitness finely adjust its position as desired While a beep sound is caused press the button for adjustment and press the button SHOULDER J gt At this time the knead balls can be moved forward or backward Ed with the button for adjustment Massage i
20. d WAIST courses One scale about 12mm KNEAD UP i a Mecha Strength Gan d M C 15 b A Around STRETCH waist SHOULDER REFRESH Adjust waist position 6 9 To turn PULSE ON or OFF Press the Gew button Select PULSE with the button select either ON or OFF also with button and then press the Ga button Turn PULSE ON Air massage starts in quick pulsation at a high frequency e PULSE is initially set at ON e The function selected is reversed FOOTREST RECLINER OPTION kj Select 673 then To turn COMBO FOOTREST ON or OFF Press the Ww button Select COMBO FOOTREST with the button select either ON or OFF also with the button and then press the button Both COMBO FOOTREST and FOOT STRETCH OPTION 1 AIR OPTION functions do not work at the same time PULSE OFF e COMBO FOOTREST is initially set at OFF FOUTREST With FOOT AIR OFF turn COMBO FOOTREST ON e Then FOOT AIR is also turned ON Select 673 then Select 6793 then 19 FUJIIRYOKI FOOTREST RECLINER 4 m 0 BO How to Adjust during Massaging with Auto Mode Course To turn FOOT STRETCH ON or OFF Press the env button Select FOOT STRETCH with the button select either ON or OFF also with the but
21. e advised as follows Those who are not tall Put the backrest at the upright position and raise the footrest Those who are tall Recline the backrest and lower the footrest mv Is detected VVN After body shape is detected the knead balls ought to move to the shoulder position as preprogrammed If the shoulder position still does not fit in with you make fine adjustment of the shoulder position 510 In the process of the FOOT STRETCH massage the chair occasionally makes a bang sound Why Indeed a bang sound may occur but it is not trouble of the chair Mechanically the electromotive actuator is designed to be separable from the footrest When the actuator retracts with the legs held by the foot air bags the footrest is separated from it momentarily This sound occurs at this moment In the process of the Auto mode course is it possible to nullify the air massage function No itis not Adjustable in the process of the Auto mode course are PULSE COMBO FOOTREST FOOT STRETCH and FOOT AIR only Trouble shooting J N WARNING You may encounter the following phenomena while in massage As being due to the mechanical design they have nothing to do with the product life A clatter noise occurs when the knead balls go up and down A creak noise of the gear and the motor occurs while in massage e A friction noise occurs
22. elect then EB ROLLING and STRETCH To select massaging part POINT WHOLE PART Press the menu button select PART with the button select POINT PART or WHOLE with the O button and press the button FUNC ADJUSTMENT WIDTH LARGE MEE PART WHOLE Select Y then e In case of having selected WHOLE set the shoulder position first At the same time the back and forth position of the knead balls can be adjusted only when either NECK RELAX EXTREME KNEAD or EXTREME TAPPING is selected Press the button or the HEIGHT ADJUSTMENT 4 or v to set the shoulder position Press the button to set the back and forth position of the knead balls Shoulder Adjustment he One scale about 12mm One scale about 2mm n case massage was in progress in the mode of NECK RELAX EXTREME KNEAD or EXTREME TAPPING or ROLLING the shoulder position does not have to be set as was already set 26 How to Adjust during the Movement of Mecha knead balls Massage Functions To adjust the height of massaging part POINT PART Adjust the height of massaging position with the HEIGHT ADJUSTMENT 4 or v button The height of massaging position can be adjusted when either POINT or PART is selected FUJIIRYOKI To adjust the shoulder position and the back and for
23. et up with menu button When the massage option selected is completed the knead balls automatically return to the stored position Storing After use turn the power switch OFF This step prevents the chair from starting movement even with the remote controller operated inadvertently CAUTION After use be sure to turn the power switch OFF Misuse by a child may cause accident RECLINER FOOTREST To discontinue massage immediately Press the button e The knead balls stop movement at the present position The standby screen comes out Select then To stop massage halfway Press the button he knead balls move to the stored position With the knead balls stored the initial display comes out on the LCD Press ON OFF S O L WT ION How to Adjust during the Movement of Mecha knead balls Massage Functions FOOTREST FUJIIRYOKI SE ADJUSTMENT RECLINER To adjust MECHA STRENGTH knead balls Press the button for adjustment and press the button MECHA STRENGTH knead balls is adjustable in 7 steps MECHA STRENGTH Strength is initially set at the Strength can be adjusted while in massaging modes of KNEAD z KNEAD DOWN TAPPING WAVELET SHIATSU S
24. ext kMEan DOWN FT G SErari tn Strength 3 p 4 eu 77 PULSE SHOULDER REFRESH To proceed to another course Press the button e With the present in progress massage discontinued you can proceed to another course SKIP The air massage has no skipping function Db gt Strength SHOULDER REFRESH FOOTREST RECLINER a taal Y 4 V O 21 Basic Massaging Movements Mechanical massage using the knead balls KNEAD UP Knead and relieve muscles from bottom to top KNEAD DOWN Knead and relieve muscles from top to bottom DEEP KNEAD UP Knead and relieve muscles deeply from bottom to top DEEP KNEAD DOWN Knead and relieve muscles deeply from top to bottom TAPPING Rhythmically repeated tapping removes muscular fatigue WAVELET Fine combination of kneading and tapping alleviates fatigue SHIATSU Relieve stiffness intensively at one place RUBBING Gently rubbing muscles as if massaged with palms NECK RELAX Relieve stiffness around the neck EXTREME KNEAD Relieve around the shoulders from upward sufficiently EXTREME TAPPING Relieve around the shoulders from upward with rhythmical tapping sufficiently ROLLING Roll over the back and stretch it out Air massage LEG Massage the calves THIGH HIP Push up the thighs and hips alternately from behind WAIST HIP MASSAGE Relieve stiffness intensively
25. from the box MAIN BODY ACCESSORIES QUICK OPERATION GUIDE lt gt Remote controller stand The grounding cable may not be packed depending on countries or regions of destination Attention Do not use any accessories other than those packaged Grounding cable ANUAL USER M lt gt Hexagonal wrench for the remote controller stand DO Mounting screws 2 pcs W How to assemble and fold the backrest Raise the backrest to the arrow direction and make sure that the stopper encircled is locked when a click sound can be heard N CAUTION S Be careful not to have hands or fingers pinched between the armrest and the backrest Press down the stopper encircled to the arrow direction and turn the backrest slowly forward Be careful not to turn the backrest quickly Release CAUTION S When using the stopper be careful not to touch any part other than the encircled Before Use How to install the remote controller stand View of the 1 Remove the cover piece onthe 2 Fix the remote controller stand finished work gt left side armrest with the mounting screws at 2 places Remote controller stand Cover piece Mounting screw Hexagonal wrench 3 Replace the cover piece How to adjust the remote How to insta
26. hould the chair not work even with the above steps taken or should the Switch on Power same symptoms be repeated turn the power switch OFF disconnect the then m power cord plug from the receptacle and contact your dealer Inspection a gt there these symptoms For prevention of accident or The chair emits a scorching smell trouble turn the power switch The power cord or the plug is overheated R DR OFF disconnect the power cord plug with the receptacle and Inspection Electricity runs on or off with the power cord E moved contact your dealer inspection for longer use There are some other abnormalities y Attention When using the chair after long storage check to make sure that it operates properly After sale service When any abnormal condition persists after checking in accordance with Page 41 stop the use disconnect the power cord plug from the receptacle and consult your dealer For any other questions If you have any questions regarding the after sale services including the repair during the warranty period etc please contact your dealer Time for retention of functional parts for repair Functional parts for repair of this massage chair are retained for six years after the termination of manufacture The functional parts mean the parts which are necessary to maintain the functions of product 42 Specifications Product name Model No Massage chair EC 1700
27. in the initial stage displays the screens as shown on the right side alternately N WARNING Do not use the massager on other than the designated voltage Do not use the chair when the power cord or its plug is damaged or when the receptacle is loosened It could electric shock short circuit or fire S O L WT ION Check items Check around the chair D Check to make sure that there is nobody no pet and nothing ahead and behind the chair and under the footrest Standby position Press the button to start massage Then the footrest automatically comes up at about 40 Be sure to check that there is nothing around Check the main body itself CD Hold up the back pad and check to make sure that the cover cloth of the backrest is not torn and that there is no tear in any other parts Should there by any tear no matter how small it is discontinue using the chair immediately Disconnect the power cord plug and contact your dealer for repair 2 Check to make sure that none of the power cord the remote controller cord or any other materials is pinched in the main body 3 Check to make sure that there is no damage in the power cord remote controller cord and the power cord plug and that nothing of dust e g pins is attached to the plug 10 4 Before seated on the chair make sure where there are the k
28. ld may cause accident 91 How to Combine Air massage with Mecha knead balls Massage To combine air massage while in mecha knead balls massage To combine air massage of LEG with THIGH HIP Press the button A list of all the functions is displayed a SELECT AIR MASSAGE p or WE OFF FUJIIRYOKI Linie ine sth un Select 73 then MB c Select a desired function with the button select ON or OFF with the button and press the button All the functions are initially set as ON SELECT AIR MASSAGE I us or LEG M OH EF ON THIGH HIP vi Select 629 then THIGH HIP selected and turned OFF 3 The function selected starts KNEAD UP KNEAD UP 7 4 E Mecha Strength 4 m Sth gt Q m gi e e e Select 6 9 then FOOTREST RECLINER 4 m 4 De ED unii AEn uini tatur To adjust massage functions see the following instructions As to How to Adjust during the Movement of Mecha knead balls Massage Functions see Page 26 As to How to Make Adjustment while in Air massage see Page 30 When pressing the enu button to adjust any function while in VOTH NARROWED LARGE combination massage a screen PART APART WHOLE as shown on the right side PULSE ON comes out
29. ll or remove controller holder the remote controller Loosen the fixing screw to a desired Installation position and fix it tightly Push it down from upward e p Removal Fixing screw Pull it up M Tighten upwa rd Cover piece Attention A GABON Check to make sure that the remote controller stand is installed tightly Its possible drop off may cause trouble or hazard on the body When removing the remote controller stand take the reverse procedure of installation How to install the back pad and the pillow Install the back pad on the zipper of Install the pillow on the velcro tape of the the backrest back pad 1 Install the back pad 2 Install the pillow Back pad Zipper a a 4 RZA 14 Pillow e When massaging place the pillow behind f you feel massaging strength strong use the pillow When not massaging use the chair as the recliner with the back pad and the pillow installed N CAUTION Before use tuck up the back pad to make sure that there is no tear on the cover cloth of the backrest and on the other parts Should there be any tear no matter how small it is discontinue using the chair immediately disconnect the power cord plug and ask for repair Continued use with the cloth torn may cause electric shock or any hazard on the body 6 Before Use Where to place the chair Place the chair on a level surface with en
30. massage with Mecha knead balls Massage 34 When Changing the Massage on the Wal c ccccscccseeceseeceeeceeeseeceueceeseaeesaeeseesaeeeaes 35 Jer FUNCION NN 38 Maintenance and Storage NOTET UE 39 erp 40 OO TING MARNE RR E um 41 Z 43 Effect and Efficacy Substitution of professional masseur e Recovery from fatigue Promotion of blood circulation e Removal of muscular fatigue Relief of muscular stiffness Alleviation of neuralgia or muscular pain e Thank you for your purchasing of Massage Chair EC 1700 e Read this manual carefully beforehand to use the product properly e After reading through keep this manual at a safe place where you can consult whenever it is necessary IMPORTANT SAFETY INSTRUCTIONS When using an electrical appliance basic precautions should always be followed including the following Read all instructions before using this appliance DAN G R To reduce the risk of electric shock 1 Always unplug this appliance from electrical outlet immediately after using and before cleaning 2 Improper connection of the equipment grounding conductor can result in a risk of electric shock Check with a qualified electrician or serviceman if you are in doubt as to whether the product is properly grounded Do not modify the plug provided with the p
31. n Massage the waists intensively 7MIN course lt REFRESH gt lt RELAX gt Gentle lt Rejuvenate gt Cover whole part The WHOLE BODY course is shortened compactly in a course of about 7 minutes 7 MIN course does not have the body shape detection Following illustration shows only the outline for quick reference Also the air massage and the lower body are abbreviated SHOULDER Rejuvenate Course y Knead down Knead up Extreme knea Rolling Extreme tappi Wavelet Point navi Knead down Knead up Rolling Neck relax Knead up Extreme WHOLE BODY Rejuvenate Course Point navi Extreme Knead down tapping Knead up Tapping Wavelet Extreme Knead waist E __ w Wavelet Extreme knea Knead up 1 1 W gt WAIST Rejuvenate Course F Stretch knead up Point navi Knead up Knead down Rolling Knead down Tapping Waist hip Extreme Rolling Knead up tapping waist Knead down Extreme knead Extreme knead J waist waist M Stretch wavelet IM gt i 5 Bi 7MIN Course Point navi Stretch knea Stretch Knead down up Rolling Knead up Knead Knead up Extreme knead Knead down Knead down Extreme tappin Extreme tappi Wavelet Wavelet Tapping Extreme tappi B
32. n Air massage see Page 30 WITH KARRO A LARGE When pressing the nem button to PART WHOLE adjust any function while in PULSE ON 198 combination massage a screen as rooreest ON Md shown on the right side comes out de NN OFF 34 When Changing the Massage on the Way Even while having an Auto mode course massage you can change to another massage FUJIIRYOKI Non Auto mode course Auto mode course Auto mode course Another Auto mode course Press the button A list of all the Auto mode course is displayed WAIST REJUVENATE REFRESH c RELAX Select 673 then Select a desired course with the button or the button and press the button FOOTREST RECLINER m 4 me REJUVENATE REFRESH RELAX Select 9 then The timer is reset at this time and the massage continues for 15 more minutes After 30 consecutive minutes the massage stops 35 When Changing the Massage on the Way Even while having an Auto mode course massage you can change to another massage Mecha knead balls massage option gt Another mecha knead balls massage option FUJIIRYOKI Auto mode course Mecha knead balls massage option Press the button A list of all the functions is displayed RELAX EXTREME EXTREME TAPPING ROLLING WAIST STRETCH El c 30 Select 73
33. ndle the cord forcibly Otherwise the cord may break resulting fire or electric shock Do not use the massager on other than the designated voltage Otherwise it may result in a cause of fire or electric shock Do not use the massager in the bathroom or places where humidity is high Otherwise it may result in electric shock or damage When the massager becomes inoperative disconnect the power plug immediately for prevention of accident and ask the sales agent for inspection repair information Otherwise it may result in fire due to electric shock leaking current short circuit etc Switch the power OFF instantly at the time of power failure as well as pull the power plug out from the socket Otherwise it would become dangerous at the time of power comeback Be careful not to fall asleep during massage Otherwise it may result in a cause of accident or injury Do not use the massager with other medical instruments excluding foot type massager Otherwise it may result in an accident or injury Place the massager main unit at a level floor surface Otherwise if it is placed at an unstable place it may fall down probably resulting in a cause of injury The maximum permissible weight of the massager is 100 kilograms Do not use the massager with those who weigh more than 100 kilograms Otherwise an accident may happen or damage to the machine may result 4 Before Use Take out the main body and the accessories
34. nead balls The knead balls are usually located at the stored position in the innermost at the lower part of the backrest e When the knead balls are not located at the stored position press the button They move down to the lowest position Press it again and then they go back to the stored position Stored position 5 Before seated on the chair make sure where there is the footrest Do not be seated forcibly with the footrest at the upright position Such attempt may result in injury Press the FOOTREST Y button or the button Press the f button Then the backrest is also stored A m 4 BO How to Adjust the Chair How to use the RECLINER To turn down the backrest press the RECLINER Y button ane Continue to press the RECLINER Y button The backrest turns down backward and the footrest comes up The deeper it turns down the stronger the knead balls movement becomes Release your finger from the RECLINER Y button at a desired angle An angle of the footrest changes in proportion to a reclining angle of the backrest To raise the backrest press the RECLINER 4 button Continue to press the RECLINER 4 button The backrest turns upward and the footrest goes down Upright position Backward position FOOTREST RECLINER taal DE WARNING Before reclining the backrest before raising o
35. ng screws first and then tighten them Check to make sure that the remote controller stand is not unfastened If so tighten it with a hexagonal wrench TI la kaasbasak AAA ma EL ra itl RS l A Nc r Ic Te IOCS DI WITI Vf Sur NKU U A l VV ELI For adjustment recline the backrest forward or backward and move the footrest upward or downward e Those who are not tall Put the backrest at the upright position and raise the footrest Those who are tall Recline the backrest and lower the footrest am a patient under the treatment at a hospital Is there no problem in using the chair Please get your physician s advice Massage relieves the muscles stiffness by giving pressure and promotes blood circulation As it may have adverse effects in certain diseases be sure to consult your physician Is there no problem in placing a hot carpet under the chair Never do so Fire may outbreak The heat element if damaged may cause fire 40 The footrest does not come up automatically to the standby position Why When the footrest is positioned at an angle higher than 40 it does not come up to the standby position even if the button is pressed moro thar VVILEL HOLS U lal Aaa tha can t nev Yes they can There is a possibility that the body shape may not be properly detected at the shoulder position even if it is finely adjusted B
36. o clean the remote controller use a dry cloth Back pad pillow and seat pad For cleaning wipe first with a cloth dipped in neutral detergent then with a cloth dipped in water and then with a dry cloth Thereafter leave it to be air dried Storage After cleaning keep the chair away from humidity In case of no use over long time protect the chair from dust with a cover cloth N CAUTION For storage avoid the place exposed to direct sunlight for long time or the place of high temperature e g close to a stove Negligence may result in discoloration S or deterioration of the chair ER 2 AE N Q5 Q6 Displacement of A mechanism is used knead balls to allow the two knead balls tapping alternately C for making massage comfortable As a result a small gap may be produced in the position between them and it may give rise to different massaging strength This phenomenon does not come from the trouble of the chair 16 re anv SUE LI en LL 4 nem 52 Lu eridtL f CJ Try to Recline the backrest Remove the back pad Be deeply seated and put your body weight on the backrest Adjust the massage strength to be stronger TI i f t O Stand 15 UNStadvie VVI Try to Tighten the fixing screws again Should the remote controller holder be unfastened loosen the fixi
37. ough space around 50cm or more 60cm or more M Attention With the backrest reclined backward the footrest goes up Keep space of 50cm or more ahead and 60cm or more behind M Attention The chair may damage the floor Spread a mattress for protection M Attention Avoid placing the chair at the place exposed to the direct ray of the sunshine for long hours every day or at the place of high temperature e g close to a heater The cover cloth may discolor or change in quality How to move the chair Lift up the front side of the chair and push it forward CAUTION e Do not move the chair with a person or any object seated on it to avoid the possible upset e Do not move the chair with its casters or do not drag it on the floor not to damage the floor surface Do not hold the seat the footrest or the shoulder unit to Lift up the front move the chair side of the chair Caster Be careful when lifting up the front side of the chair itis very heavy Name and Functions of Components LOW Put it behind when massaging Back pad Recline on this back pad Backrest Knead massage the whole back Remote controller stand K MJ Caution tag Y QUICK OPERATION GUIDE Seat K c Air massage hips and f 7 thighs Footrest Air massage legs and feet
38. r lowering the footrest or before having the footrest going forward or coming backward check to make sure that there is nobody no pet or nothing ahead and behind the chair and under the footrest Negligence may result in accident hazard on the body or damage in furniture Do not allow anybody to ride on the backrest the armrest the footrest or the shoulder unit The chair may overturn and the user may fall down and hurt himself herself E Attention When reclining the backrest while in massage turn it little by little backward taking the massaging strength into consideration 11 How to Adjust the Chair How to use the FOOTREST To raise the footrest press the FOOTREST 4 button Continue to press the FOOTREST 4 button The footrest comes up Release your finger from the FOOTREST 4 button at a desired angle FUJIIRYOKI 3 To lower the footrest press the FOOTREST Y button Continue to press the FOOTREST Y button The footrest goes down Downward position Upward position FOOTREST RECLINER RESET v Before lowering the footrest be careful not to have your foot or hand pinched in it Check to make sure that there is nobody no pet or nothing under the footrest Negligence may result in hazard on the body How to use the RESET button FOOTREST RECLINER To store the backrest and the footrest press the
39. r to inclining the Backrest Otherwise it may result in a cause of injury or trouble 16 Be sure to check that there is not anybody children in particular pet or obstacle behind prior to lowering the Footrest Otherwise it may result in a cause of injury 17 Be careful not to operate the Backrest with the cord wound on the main unit or with the cord hooked to the other obstacle Otherwise the unreasonable force may be applied to the cord probably resulting in a cause of fire or electric shock 18 Be careful not to put the hand into the clearance at the underside of Backrest or to the clearance between the Backrest and Armrest Otherwise it may result in a cause of injury IMPORTANT SAFETY INSTRUCTIONS WARNING 19 Do not attempt to stand on the Armrest Footrest or Backrest Otherwise the massager may fall down resulting in injury 20 Do not use the massager on the head arm knee or abdomen As well as do not put your hand or leg between knead ball Otherwise the user may feel sick or an injury may occur 21 Do not attempt to plug unplug the power plug with wet hands Otherwise it may result in injury or electric shock 22 When the cover cloth is broken when the built in mechanism is exposed do not use such massager but send it for repair Otherwise it may result in a cause of accident or injury 23 Never attempt to disassemble the massager Do not allow any personnel other than repair engineer to disassem
40. roduct if it will not fit outlet have a proper outlet installed by a qualified electrician WARN N G To reduce the risk of burns fire electric shock or injury to persons 1 An appliance should never be left unattended plugged in Unplug from outlet when not in use and before off parts 2 Do not operate under blanket or pillow Excessive heating can occur and cause fire electric shock or injury to persons 3 Close supervision is necessary when this appliance is used by on or near children invalids or disabled persons 4 Use this appliance only for its intended use as described in this manual Do not use attachments not recommended by the manufacturer 5 Never operate this appliance if it has a damaged cord or plug if it is not working properly if it has been dropped or damaged or dropped into water Return the appliance to a service center for examination and repair Do not carry this appliance by supply cord or use cord as a handle Keep the cord away from heated surfaces Never operate the appliance with the air openings blocked Keep the air openings free of lint hair and the like 9 Never drop or insert any objects into any opening 10 Do not use outdoors 11 Do not operate where aerosol spray products are being used or where oxygen is being administered 12 To disconnect turn all controls to the off position then remove plug from outlet IMPORTANT SAFETY INSTRUCTIONS WARNING 13 Grounding Instruction
41. s This product must be grounded If it should malfunction or breakdown grounding provides a path of least resistance for electric current to reduce the risk of electric shock This product is equipped with a cord having an equipment grounding conductor and a grounding plug The plug must be plugged into an appropriate outlet that is properly installed and grounded in accordance with all local codes and ordinances This product is for use on a nominal 120 volt circuit and has a grounding plug that look like the plug illustrated in sketch A A temporary adapter that looks like the adapter illustrated B and C may be used to connect the plug to a 2 pole receptacle as shown in sketch B if a properly grounded outlet is not available The temporary adapter should be used only until a properly grounded outlet sketch A can be installed by a qualified electrician The green colored rigid ear lug or the like extending from the adapter must be connected to a permanent ground such as a properly grounded outlet box cover Whenever the adapter is used it must be held in place by a metal screw GROUNDING METHODS Sketch A Sketch B Sketch C Grounded outlet 1 8 co Grounded Grounding outlet box Tab for 77 pin grounding screw Save these instructions Adapter Metal screw 14 Massager is intended for Household Use Only 15 Be sure to check that there is not anybody children in particular pet or obstacle behind prio
42. s made with the T PCR knead balls at the position adjusted for NECK RELAX One scale EXTREME KNEAD and EXTREME TAPPING in the about 2mm Auto mode course This massage is available only for the REJUVENATE course of WHOLE BODY and SHOULDER courses 14 How to Use the Auto Mode Course Fine adjustment of the shoulder position can be made with the HEIGHT ADJUSTMENT v buttons Press the button and detect your body shape Your body shape is kept in memory until the massage is completed To change your body shape in memory press the button and finish the massage Then start all over again FUJIIRYOKI When the allowance time for fine adjustment of the shoulder position is counted up a message POINT NAVI FINISHED is displayed SHOULDER REFRESH COURSE d POINTNAVI 3 FINISHED M ADJUSTMENT v SHOULDER REFRESH COURSE Contour of UR FOOTREST RECLINER The Auto mode course in progress is displayed on the LCD Mecha knead balls massage Present massage mode strength KNEAD UP Next massage mode Hext KNEAD DONNA Air massage ONET iw Sem D Strength E j Present fem position of ae Mecha knead J ll balls massage option functions Rest time E za Air massage Air movement conditions Name of Auto mode course 15 How to Use the Auto Mode Course When the Auto mode course
43. sickness or pain is felt during use stop using the massager and consult a doctor immediately Otherwise it may result in injury IMPORTANT SAFETY INSTRUCTIONS WARNING 26 2f 28 29 30 31 32 33 34 35 36 3f 38 39 40 41 Attempt to use the massager up to 15 minutes for each use Limit the use of massager at one point up to 5 minutes Otherwise the use of massager at one point for a long time continuously may result in adverse effect Check the knead ball position for the sake of safety before leaning on the massager slowly Do not twist the body but lean on the massager straight so that the backbone is located at center of knead ball Otherwise leaning on the massager abruptly may injure the backbone or result in injury Do not pull the cord but the plug when unplugging the massager Otherwise the electric shock or short circuit may occur resulting in fire Do not use the massager with bare skin Otherwise it may result in a cause of injury Do not move the massager with a person on it Otherwise the massager may fall down After use be sure to set the POWER switch to OFF position Otherwise it may result in accident or injury due to child s mischief Do not attempt to pull the Back Pad forcibly or hang from the Back Pad Otherwise the Back Pad may come off probably resulting in injury or broken massager Do not attempt to damage bend pull twist or bu
44. th position while in massage of NECK RELAX EXTREME KNEAD and EXTREME TAPPING Press the HEIGHT ADJUSTMENT 4 or v button once Then a screen for adjustment comes out Adjust the shoulder position with the button or the HEIGHT ADJUSTMENT 4 or v button and adjust the back and forth position of the knead balls with the button 3 Shoulder d Adjustment sk 0900000 8 Rear n shoulder position 625 FOOTREST RECLINER a m 4 ec One scale about 2mm One scale about 12mm To adjust the waist position in EXTREME KNEAD WAIST and EXTREME TAPPING WAIST Press the HEIGHT ADJUSTMENT 4 Jor v button once Then a screen for adjustment comes out Adjust the waist position with the button or the HEIGHT ADJUSTMENT A or 7 button Waist Adjustment F LI CH Do SAU Adjust waist position 62 One scale about 12mm 27 FUJIIRYOKI HEIGHT ADJUSTMENT FOOTREST RECLINER nmn 0 I O How to Adjust during the Movement of Mecha knead balls Massage Functions To adjust mecha knead balls massaging speed Press the env button select SPEED with the button select SLOW or FAST with the C 3 button and press the button This function is available for KNEAD UP KNEAD DOWN DEEP KNEAD UP DEEP KNEAD DOWN TAPPING WAVELET RUBBING
45. then Select a desired function with the button or the button and press the button n detail see How to Use the Mecha knead balls Massage Functions Page 23 FOOTREST RECLINER ta m 4 W EH v NECK RELA EXTREME HAE AT Steins ee B STRETCH SIEHE Select 629 then e When changing a mecha knead balls massage option to another mecha knead balls massage option the timer function is in continuation e When changing an Auto mode course option to a mecha knead balls massage option the timer is reset at this time and the massage continues for 15 more minutes After 30 consecutive minutes the massage stops 36 When Changing the Massage on the Way Even while having an Auto mode course massage you can change to another massage Air massage option Another air massage option FUJIIRYGKI Auto mode course Air massage option Press the Car button A list of all the functions is displayed SELECT AIR MASS AGE 100 OFF THIGH HIP Select 6_3 then c Select a desired function with the button select ON OFF with the button and press the button All the functions are initially set at ON first SELECT AIR MASS AGE SELECT AIR MASSAGE LEG OFF LEG OFF THIGH Mer ON Select 673 then Select 6_3 then e
46. ton and then press the button Both FOOT STRETCH and COMBO FOOTREST functions do not work at the same time e FOOT STRETCH is initially set at e With FOOT AIR OFF turn FOOT STRETCH ON Then FOOT AIR is also turned ON AIR OPTION OPTION PULSE OFF rootrest ON FOOT STRETCH STRETCH 7 W Select 679 then Select then To turn FOOT AIR ON or OFF Press the ew button Select FOOT AIR with the button select either ON or OFF also with the button and then press the button e FOOT AIR is initially set at ON e With both FOOT AIR and COMBO FOOTREST ON turn FOOT AIR OFF Then COMBO FOOTREST is also turned OFF e With both FOOT AIR and FOOT STRETCH ON turn FOOT AIR OFF Then FOOT STRETCH is also turned OFF AIR OPTION OPTION PULSE OFF rootrest ON ETRETCH STRETCH OFF FOOT AIR OFF Select 9 then Select 673 then 20 How to Adjust during Massaging with Auto Mode Course To repeat the present in progress massage Press the button The present in progress massage is repeated for more 30 seconds The air massage has no repeating function While in the repeated massage press the button The massage is repeated again for more 30 seconds While in the repeated massage press the button The repeating function is reset FUJIIRYOKI REPEAT H
47. ton remains not to be pressed this function starts 5 seconds later The same holds good of this procedure SELECT amp IR MASSAGE LEG OFF OFF Select 73 then 3 Select a desired function with the button or the button select ON or OFF with the button and press the button All the functions are initially set as ON SELECT AIR MASSAGE LEG OFF THIGH HIP Select 73 then The function selected starts 29 SELECT AIR MASSAGE LEG OFF MOM ON Select 673 then THIGH HIP selected and turned OFF TID Change the zet up with menu buttan How to Make Adjustment while in Air massage FUJIIRYOKI HEIGHT ADJUSTMENT FOOTREST RECLINER 4 m 4 Ui To adjust air massage strength Press the D button for adjustment and press the rer button e AIR STRENGTH is adjustable in 5 steps em Strength is initially set at the JG step 3 AIR STRENGTH 5 Select 73 then To turn PULSE ON or OFF Press the ew button Select PULSE with the button select either ON or OFF also with the button and then AIR OPTION OFF press the ee button e PULSE is initially set at OFF Select 673 then To turn COMBO FOOTREST ON or OFF Press the env button Select COMBO FOOTREST with
48. when the knead balls rub the cover cloth particularly while in the process of knead e rattling noise occurs while in the TAPPING or WAVELET massage particularly when the massage moves from the shoulders to the back e Inthe KNEAD TAPPING or WAVELET massage massaging speed may vary with the knead balls strength changed e A noise becomes different when the massaging speed is changed Aroaring noise of the motor occurs when load is given to the chair e cuckoo noise occurs while in the Auto mode course the knead balls are automatically adjusted to the back and forth position to have the chair fitting in with the user s body shape e he compressors noise and the air exhausting noise occur while in air massage e A noise occurs when the air bag is inflated e A grinding noise occurs when the backrest is reclined The knead balls are not aligned in parallel between left and right A mechanism is used to allow the two knead balls tapping alternately As a result a small gap may be produced in the position between them This phenomenon is not due to the trouble of the chair Absolutely do not modify disassemble or repair by yourself Negligence may cause fire or mechanical trouble of the chair which may result in hazard on the body W 5 The chair does not start up Is the backrest in touch with Move the chair away from the the wall or the like wall or the
49. witch OFF Backlight O TA ON 38 Maintenance and Storage Main Body Cover cloth back pad pillow and seat pad made of PVC leather Attention Wipe the PVC leather first with a cloth dipped in neutral detergent then with a cloth dipped in water and then with a dry cloth Thereafter leave it to be air dried Be careful not to overuse neutral detergent It may damage the PVC leather Wipe the coated surface with a dry cloth Attention Keep the chair away from high temperature high humidity and dust CAUTION Jones Before doing maintenance work be sure to disconnect the power cord plug Avoid the use of benzene thinner Be careful that hands must not be wet alcohol or insecticides The use of these chemicals may Negligence may result in electric shock or injury S cause electric shock or catch fire e MAIN BODY CAUTION To clean the plastics the pipes and the Avoid the use of benzene thinner armrest use a cloth first dipped in neutral alcohol solvents or abrasives detergent and then use a squeezed cloth and The use of these chemicals may neutral detergent on the surface Wipe the coated surface with a dry cloth N CAUTION Do not use a wet towel Negligence may cause trouble in S the chair CAUTION Avoid the use of an iron then wipe with a dry cloth to completely remove S cause scratch discoloration or crack Remote controller T
Download Pdf Manuals
Related Search
EC 1700_manual