Manual - Northern Tool + Equipment
Contents
1. M12x40 bolts amp nuts 23 amp 24 4 Attach wheels 18 and washers 19 to wheel axle 5 then secure with cotter pins 20 5 Secure the axle links 5A of wheel axle 5 to connecting block 12 with M12 bolts and washers 13 amp 19 6 Attach hook bracket 9 to top cover 4 and secure with lock pin 11 7 Attach angle adjustable wheel 7 to middle rod 6 with set screw 8 8 Attach handle 1 to top cover 4 with lock pin 2 9 Insert handle grip 10 to handle 1 OPERATION 1 Prepare the brake drum or brake drum hub assembly for removal according to the instructions in vehicle service manual 2 Place drum handler in a horizontal position 3 Turn the angle adjustable wheel until the drum han dler is in its lowest postion 4 Position the handler under the drum until the holding arms meet the outer surface of the drum 5 Turn the angle adjustable wheel clockwise until the handler meets the lower surface of the drum 6 Lower the handle to slightly lift the drum Pull the handler and drum back away from the brake as sembly 7 Removing installing drum only Flip the hook bracket into the hub opening of the drum as shown in figure 2 Removing installing drum and hub as assembly Position the hook bracket reverse as shown in figure 3 to allow a wheel nut to secure hook to drum hub assembly 8 It may be necessary to adjust the hook Remove the hook lock pin and move the hoo2. MEDY OF THE CONSUMER AND IS PROVIDED IN LIEU OF ALL OTHER WARRANTIES EXPRESS OR IMPLIED 4 ANY MODIFICATION ALTERATION ABUSE UNAUTHORIZED SERVICE OR ORNAMENTAL DESIGN VOIDS THIS WARRANTY AND IS NOT COVERED BY THIS WARRANTY Some states do not allow limitations on how long an implied warranty lasts so the above limitation may not apply to you Some states do not allow the exclusion or limitation of incidental or consequential damages so the above limitation or exclusion may not apply to you This warranty gives you specific legal rights and you may also have other rights which vary from state to state SFA Companies 10939 N Pomona Ave Kansas City MO 64153 o OMEGA 888 332 6419 sales omegalift com Contact SFA Companies 10939 N Pomona Ave Kansas City MO 64153 U S A OMEGA Tel 888 332 6419 Fax 816 891 6599 O E Mail sales omegalift com Omega Website http Awww omegalift com Note Page Contact SFA Companies 10939 N Pomona Ave Kansas City MO 64153 U S A Tel 888 332 6419 Fax 816 891 6599 OMEGA E Mail sales omegalift com Omega Website http Awww omegalift com Note Page Contact SFA Companies 10939 N Pomona Ave Kansas City MO 64153 U S A OMEGA Tel 888 332 6419 Fax 816 891 6599 E Mail sales omegalift com Omega Website http Awww omegalift com
3. Operating Instructions amp Parts Manual OMEGA ME Brake Drum Handler Model 46000 Rated capacity has not been established by the manufacturer of this device Extraordinary care must be taken to avoid overloading This is the safety alert symbol It is used to alert you to potential personal injury hazards Obey all safety messages that follow this symbol to avoid possible injury or death Leer comprender y seguir las instrucci nes antes To avoid crushing and related injuries de utilizar el aparato e NEVER work on under or around El manual de instrucci nes y la informacion de a load supported only by a hydraulic seguridad deben estar comunicado en lengua del jack operador antes del uso e ALWAYS use adequately rated jack e No seguir estas indicaci nes puede causar da os stands personales o materiales SFA Companies http www omegalift com Read this manual and follow all the Safety Rules and Operating Instructions before using this product Printed in China 46000 M2 rev 05 10 SAFETY and GENERAL INFORMATION Save these instructions For your safety read understand and follow the information provided with and on this equipment before using The owner and operator of this equipment shall have an understanding of this it and of safe operating procedures before attempting to use The owner and operator shall be aware that the use and repair of this product may require special skills and knowledge In
4. face Item Parti Description 16 ki Washer 17 Nut M6 18 T230 00005 000 Wheel 8 19 ki Washer 20 Cotter Pin 21 i Washer 22 x Nut M10 23 kj Hex Bolt M12x40 24 x Nut M12 25 x Set Screw T230 09000 000 Hardware Kit O Sass Hardware Kit includes item 8 15 16 17 19 20 21 22 23 24 8 25 Figure 4 Replacement Parts Illustration ONE YEAR LIMITED WARRANTY For a period of one 1 year from date of purchase SFA Companies will repair or replace at its option without charge any of its products which fails due to a defect in material or workmanship under normal usage This limited warranty is a consumer s exclusive remedy Performance of any obligation under this warranty may be obtained by returning the warranted product freight prepaid to SFA Companies Warranty Service Department 10939 N Pomona Ave Kansas City MO 64153 Except where such limitations and exclusions are specifically prohibited by applicable law 1 THE CONSUMER S SOLE AND EXCLUSIVE REMEDY SHALL BE THE REPAIR OR REPLACEMENT OF DEFECTIVE PRODUCTS AS DESCRIBED ABOVE 2 SFA Companies SHALL NOT BE LIABLE FORANY CONSEQUENTIAL OR INCIDENTAL DAMAGE OR LOSS WHATSOEVER 3 ANY IMPLIED WARRANTIES INCLUDING WITHOUT LIMITATION THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE SHALL BE LIMITED TO ONE YEAR OTHERWISE THE REPAIR REPLACEMENT OR REFUND AS PROVIDED UNDER THIS EXPRESS LIMITED WARRANTY IS THE EXCLUSIVE RE
5. ition for drum only Holding Arms Hook Position for drum hub Figure 3 Illustration for removing installing drum hub assembly MAINTENANCE Periodically inspect the drum handler Ensure all parts move freely When not in use store drum handler in upright position and in a clean dry area REPLACEMENT PARTS Not all components of the drum handler are replacement items but are illustrated as a convenient reference of location and position in the assembly sequence When ordering parts give Model number serial number and parts description Call or write for current pricing SFA Companies Inc 10939 N Pomona Ave Kansas City MO 64153 E Mail sales omegalift com U S A Tel 888 332 6419 Fax 816 891 6599 Omega Website http www omegalift com Replacement Parts for Omega 46000 ltem Part Description 1 T230 00001 000 Handle 2 T230 06000 000 Lock Pin 3 N A Base 4 T230 02000 000 Top Cover 5 T230 04000 000 Wheel Axle 6 T230 00003 000 Middle Rod 7 T230 08000 000 Adjustable Wheel 8 Screw 9 T230 01000 000 Hook Bracket 10 T230 00006 000 Handle Grip 11 T230 07000 000 Lock Pin 12 T230 05000 000 Connecting Block 13 T230 00004 000 Hex Bolt M12 14 T230 00002 000 Holding Arm 15 i Hex Bolt M6x25 Lubrication A periodic coating of light lubricating oil to pivot points axles and hinges will help to prevent rust and assure that assemblies move freely Paint contains lead DO NOT sand or grind painted sur
6. k bracket to any one of four hole locations 9 Pull the drum completely away from the brake as sembly Slowly and carefully lift the handle to place the drum face down on the floor being cautious of the transfer of load weight Note Reverse the process to Install the brake drum back to the brake assembly Be sure to align the drum with the studs and follow the instructions in the vehicle service manual Study understand and follow all printed mate rials provided with and on this device before use Ensure that vehicle is chocked lifted and sup ported by adequately rated jack stands before using this product Use only for removal installation and transport of brake drum hub assys which nest and can be secured within the bed frame and holding arms DO NOT overload Bending bowing or cracked components are visible evidence of overloading If such deformation is noted STOP immediately discontinue use and transfer load to a drum han dler of greater capacity Secure drum before transporting Use only on hard level surface Raise and lower the brake drum slowly Always wear steel toed shoes when using this device Brake drum dust is hazardous to your health Consult Federal State and local regulations con cerning the safe handling of asbestos and what precautions to take when handling Failure to heed these markings may result in personal injury and or property damage Brake Drum Holding Arms Hook Pos
7. n 1 Read and understand instructional and warning materials provided with and on this product 2 Verify that the product and the application are com patible if in doubt contact Technical Service 888 Holding Arm Handle 332 6419 Bed Handle 3 Thoroughly familiarize yourself with this product its Andle Lock Pin components and the hazards associated with its use Handle Fork 4 Inspect drum handler before each use Do not use if bent broken or cracked components are noted Bed Height Ensure that all parts move freely 5 Consult the vehicle manufacturer s service manual for proper preparation and procedures for removing Wheel Axl Hook Lock Pin amp installing a drum hub assemblies Angle Control Rated capacity has not been established by the manufacturer of this device Extraordinary care Drum Handler Frame must be taken to avoid overloading Bending bowing or cracked components are visible evidence of over Figure 1 Model 46000 Nomenclature loading If such deformation is noted STOP imme diately discontinue use and transfer load to a drum handler of greater capacity ASSEMBLY refer to figure 4 on page 4 1 Thread the connecting block 12 to middle rod 6 then secure to base 3 with M10 nut and washer 21 amp 22 2 Secure top cover 4 and two holding arms 14 to base 3 with M6x25 bolts washers amp nuts 15 16 amp 17 3 Attach wheel axle 5 to base 3 with
8. structions and safety information shall be conveyed in the operator s native language before use is authorized If any doubt exists as to the safe and proper use of this equipment remove from service immediately Inspect before each use Do not use if broken bent cracked or damaged parts are noted Any Brake Drum Handler that appears damaged in any way or operates abnormally shall be removed from service immediately If this equipment has been subjected to a shock load a load dropped suddenly unexpectedly upon it immediately discontinue use until it has been checked by a factory authorized service center contact distributor or manufacturer for list of authorized service centers It is recommended that an annual inspection be done by qualified personnel Labels and Operator s Manuals are available from manufacturer PRODUCT DESCRIPTION The Omega Brake Drum Handler is specifically designed to engage secure and transport from an axle assembly an unfastened and loose brake drum hub assembly It is not designed to act as a puller and should be relied upon to ONLY handle brake drum hub assemblies which nest within the holding arms and side frames of the Brake Drum Handler as seen in Figs 2 3 A Do not use this device for any purpose other than that for which it is expressly intended SPECIFICATIONS Product Size Min Bed Height Max Bed Height LXWXH 46000 10 5 8 61 3 8 X 19 5 8 X 17 5 8 eats BEFORE USE assy positio
Download Pdf Manuals
Related Search