Home

Models: 34788NI, 34788NI-H

1. Safety Precautions A WARNING To prevent personal injury ALLOW ONLY QUALIFIED PERSONNEL TO OPERATE THE MACHINE Before operating the machine read and follow the instructions and warnings in this manual The operator must be familiar with air conditioning and refrigeration systems refrigerants and the dangers of pressurized components If the operator cannot read this manual operating instructions and safety precautions must be read and discussed in the operator s native language USE THE 34788NI 34788NI H AS OUTLINED IN THIS MANUAL Using the machine in a manner for which it was not designed will compromise the machine and nullify the protections provided PRESSURIZED TANK CONTAINS LIQUID REFRIGERANT Do not overfill the internal storage vessel ISV because overfilling may cause explosion resulting in personal injury or death Do not recover refrigerants into nonrefillable containers use only type approved refillable containers that have pressure relief valves HOSES MAY CONTAIN LIQUID REFRIGERANT UNDER PRESSURE Contact with refrigerant O may cause personal injury including blindness and frozen skin Wear protective equipment including goggles and gloves Disconnect hoses using extreme caution Ensure the phase has been completed before disconnecting the machine to prevent the release of refrigeration to the atmosphere DO NOT BREATHE REFRIGERANT AND LUBRICANT VAPOR OR MIST R134a reduces the oxygen available
2. Concerning the Products IAR Embedded Workbench and visualSTATE from IAR Systems AB PREAMBLE THIS SOFTWARE LICENSE AGREEMENT THE AGREEMENT APPLIES TO PRODUCTS LICENSED BY IAR SYSTEMS AB INCLUDING ANY OF ITS SUBSIDIARIES IAR SYSTEMS OR DISTRIBUTORS IAR DISTRIBUTORS TO YOU THE LICENSEE The order confirmation from IAR Systems or when applicable the agreement between IAR Systems and the Licensee will set out apart from the applicable licensed product and license fee which will also be stated in the Invoice a if the License in question is a PC locked License or a Multi user License b in case of a Multi user License with the allowed number of simultaneous users c if the license includes a time limited Support and Update Service and in such cases the expiry date of such service Any opening of a package where these terms have been stated or referred to and any use of IAR Systems software is subject to these terms and conditions YOU AS A USER OF THE LICENSED PRODUCTS STATED ABOVE AND ON THE INVOICE WILL BIND THE CORPORATION OR ORGANIZATION ALSO SET OUT ON THE INVOICE TO THIS AGREEMENT BY OPENING OF A PACKAGE OR INSTALLING SOFTWARE WHERE THIS AGREEMENT HAS BEEN STATED OR REFERRED TO IF YOU ARE NOT IN AGREEMENT WITH THE TERMS HEREIN OR DO NOT HAVE THE AUTHORITY TO BIND YOUR CORPORATION OR ORGANIZATION TO THESE TERMS YOU SHALL IMMEDIATELY CONTACT IAR SYSTEMS AND YOU MAY NOT INSTALL ANY SOFTWARE OR MAKE USE OF ANY PARTS OF
3. Monthly Check internal scale calibration Monthly Refer to Calibration Check in the Maintenance section of this manual Check machine for leaks Monthly Check hoses and connections for leakage Disconnect power remove the shroud and use an electronic leak detector to check fittings Clean air intake panels see Figure 5 Monthly Use a clean cloth Clean cabinet and control panel Monthly Use a clean cloth Inspect power cord and hoses for cuts and abrasions Daily Lubricate wheel bearings and inspect brake components Monthly Pressure Test 26 Every 10 years performed by an authorized Robinair service center dcum To prevent personal injury e Only qualified personnel may TA perform inspections and repairs to this machine e Read and follow instructions and warnings in this manual d N Wear protective equipment such Y as goggles and gloves m Maintenance Electrical Protection The machine is equipped with a circuit breaker on the center divider as shown in Figure 6 If the breaker trips its button will pop out A tripped circuit breaker will cause the machine to lose all power 1 Remove the front shroud 2 Press the circuit breaker button to reset 3 Replace the shroud Load Language Insert SD card Use the following instructions to add or update a containing new language fr
4. d Limitation of Liability a In no event shall Licensor be liable to Sub Licensee for any lost profits incidental special exemplary punitive indirect or other consequential dam ages even if Licensor knows or has been advised of the possibility of such damages or for any claim against Sub Licensee by any other person or entity or for any damage caused by Sub Licensee s failure to perform its responsibilities Updated 2013 02 15 IAR Systems AB February 2013 Rev 5 Freescale MQX RTOS 4 0 2 IMPORTANT Read the following Freescale Semiconductor Software License Agreement Agreement completely By selecting the Accept button below you indicate that you accept the terms of this Agreement You may then install the software FREESCALE SEMICONDUCTOR SOFTWARE LICENSE AGREEMENT This is a legal agreement between you either as an individual or as an authorized representative of your employer and Freescale Semiconductor Inc Freescale It concerns your rights to use this file and any accompanying written materials the Software In consideration for Freescale allowing you to access the Software you are agreeing to be bound by the terms of this Agreement If you do not agree to all of the terms of this Agreement do not download the Software If you change your mind later stop using the Software and delete all copies of the Software in your possession or control Any copies of the Software that you have already distributed
5. 15 The machine will then automatically enter the Vacuum process and proceed to a leak test 16 Once the vacuum and leak tests are completed the unit will enter the actual system flushing process followed by an oil drain 17 When the Flush Complete screen appears it includes a system flush result summary If your unit has a printer you may print out the summary by pressing the amp key Press the gt gt key to return to the SETUP MENU 18 The vehicle A C system has been flushed CAUTION The flushing kit has a replaceable filter as well as a debris strainer both of which can get plugged At the end of the flush cycle check the high side red gauge for system pressure and check the adapter for complete removal of refrigerant If pressure exists or refrigerant remains exit the flushing cycle and enter the recovery mode to recover refrigerant through both the high side red and low side blue hoses Then service the filters and repeat the flush process 34788 NI 34788NI H Rev B 25 Maintenance Maintenance Schedule Maintenance Task Recommended Interval Change filter After 150 kg 331 Ibs of refrigerant has been filtered Refer to Filter Maintenance in the Maintenance section of this manual Change vacuum pump oil When the filter is replaced Refer to Change Vacuum Pump Oil in the Maintenance section of this manual Check casters and wheels for ease of operation
6. Oil Drain Bottle 2 Printer Cap Low side blue and High side red Manifold Gauges Graphic Display and Keypad USB and SD card Connections 5 2224Vems double insulation in respect to main lines DOTE a o imo rear Introduction Control Panel Functions ARROW UP moves selection of a menu item to the previous item ARROW DOWN moves selection of a menu item to the following item ARROW RIGHT scrolls to next screen ARROW LEFT scrolls to previous screen SELECTION ARROWS make a selection or answers A a query s a A A Lt ABC S JKL PQRS TUV WXYZ Control Panel Keypad 34788 NI 34788NI H Rev B 7 Introduction Symbol Legend AUTOMATIC SYMBOL Pressing the key under this icon will enter the automatic refrigerant recovery vacuum and charge process N RECOVER SYMBOL Pressing the key under this icon will enter the refrigerant e iiis recovery process IN VACUUM SYMBOL Pressing the key under this icon will enter the system vacuum V inia process AN CHARGE SYMBOL Pressing the key under this icon will enter the refrigerant xe pibe charge process NEXT FORWARD SYMBOL Pressing the key under this icon will proceed to p D additional menu selection options or proceed to an additional step in a function or process BACK SYMBOL Pressing the key under this icon will return to previously seen 4 4 menu selection options or return to the previous screen with
7. amp key Press the gt gt key to return to the main menu 18 Operating Instructions Vacuum 9 Evacuate the Vehicle A C System 1 Connect the service hoses to the vehicle s service ports Open the service hose coupler valves by turning the collars clockwise While within the Main Menu press the VACUUM Vw key on the control panel Select Vacuum Leak Check if desired to automatically perform a 5 minute pressure rise leak check after the vacuum Press the Y key to accept the 15 minute default evacuation time or enter a desired vacuum time using the number keys Note The vacuum process will halt if pressure rises above 35 bar 5 psi Recover refrigerant before proceeding The machine pulls a vacuum on the A C system for the programmed amount of time The machine stops when the specified amount of time has elapsed If your machine has a printer you may print out vacuum information by selecting the amp key Press the gt gt key to return to the Main Menu 34788 NI 34788NI H Rev B 29 7428 WARNING To prevent personal injury while working with refrigerant read and follow the fy instructions and warnings in this ZN manual and wear protective equipment such as goggles and ba gloves 19 Operating Instructions Flush Hoses Flushing the Hoses If the next vehicle to be serviced contains a different type of oil than the
8. THE USE OR PERFORMANCE OF THE SOFTWARE OR ANY SYSTEMS YOU DESIGN USING THE SOFTWARE IF ANY NOTHING IN THIS AGREEMENT MAY BE CONSTRUED AS A WARRANTY OR REPRESENTATION BY FREESCALE THAT THE SOFTWARE OR ANY DERIVATIVE WORK DEVELOPED WITH OR INCORPORATING THE SOFTWARE WILL BE FREE FROM INFRINGEMENT OF THE INTELLECTUAL PROPERTY RIGHTS OF THIRD PARTIES INDEMNITY You agree to fully defend and indemnify Freescale from any and all claims liabilities and costs including reasonable attorney s fees related to 1 your use including your sublicensee s use if permitted of the Software or 2 your violation of the terms and conditions of this Agreement LIMITATION OF LIABILITY IN NO EVENT WILL FREESCALE BE LIABLE WHETHER IN CONTRACT TORT OR OTHERWISE FOR ANY INCIDENTAL SPECIAL INDIRECT CONSEQUENTIAL OR PUNITIVE DAMAGES INCLUDING BUT NOT LIMITED TO DAMAGES FOR ANY LOSS OF USE LOSS OF TIME INCONVENIENCE COMMERCIAL LOSS OR LOST PROFITS SAVINGS OR REVENUES TO THE FULL EXTENT SUCH MAY BE DISCLAIMED BY LAW Freescale MQX RTOS 4 0 2 COMPLIANCE WITH LAWS EXPORT RESTRICTIONS You must use the Software in accordance with all applicable U S laws regulations and statutes You agree that neither you nor your licensees if any intend to or will directly or indirectly export or transmit the Software to any country in violation of U S export restrictions GOVERNMENT USE Use of the Software and any corresponding docume
9. Use of improvements modifications enhancements or updates received by the Licensee under IAR Systems Support and Update Agreement SUA or received under Section 7 of this Agreement shall be governed by the terms and conditions contained herein 13 TERMINATION OF THE AGREEMENT 13 1 IAR Systems shall have the right to terminate this Agreement with immediate effect if the Licensee is in breach of any of its obligations under this Agreement including but not limited to a use of the Software in any manner other than pursuant to the rights granted in Article 3 and 4 b breach of the confidentiality provisions of Article 5 or c failure of the Licensee to remit payments as provided in Article 6 13 2 This Agreement will terminate immediately without notice if Licensee suspends its payments becomes bankrupt or insolvent or enters into liquidation or otherwise can be regarded as insolvent 13 3 Upon IAR Systems termination of this Agreement as set out in this Article then IAR Systems may at its option and in addition to any other rights hereunder and in addition to any other remedies available to IAR Systems under the law in writing require the Licensee to return or destroy all versions of the Software and the Documentation and any and all documentation relating thereto on any media and in any form in Licensee s possession Licensee shall give a written confirmation to IAR Systems that all material related to the Software and its operatio
10. Verify there is at least 6 0 kg 13 2 Ib of refrigerant in the Robinair machine The machine will not be able to complete a system flush without at least 6 0 kg of refrigerant in the ISV Note If the machine does not have at least 6 0 kg 13 2 Ib of refrigerant on board see the section Oil Drain of this manual titled Tank Fill Bottle 7 Disconnect the Robinair machine from the vehicle 8 Refer to the vehicle service manual and connect the appropriate flushing adapters and bypasses 9 Connect the low side blue service hose Figure 4 directly to the filter of the flushing kit 10 Remove the high side red service coupler and connect the high side red service hose to the system suction line adapter 11 Use the supplied hose to connect the system discharge adapter to the flusher inlet 12 Connect hoses according to the instructions included with the flush kit 24 Operating Instructions System Flush System Flush contd 13 Select SYSTEM FLUSH from the SETUP MENU AX warnine Do NOT disconnect The unit will prompt you to enter any service service couplers during the flushing data if desired Press the Y key to continue to process Refrigerant could spray out of the system flushing process the fittings and exposure may cause 14 Depending on the particular flush process personal injury that is enabled on you model of machine you may or may not be prompted to enter in a total Flush Time
11. also expressly prohibited from adapting modifying revising improving upgrading enhancing and creating derivative works of the Executable Software for any purpose including error correction or any other type of maintenance 4 2 The Licensee shall keep records of the Licensee s use of Software The Licensee shall make the records available to either IAR Systems or a neutral third party on reasonable notice as agreed between the parties In the case of a neutral third party audit IAR Systems and Licensee shall in good faith mutually appoint an auditor Should such an agreement not be reached within 60 days after IAR Systems notice then the parties agree to have Business Software Alliance conduct such an audit or itself elect an auditor The Licensee will permit IAR Systems or a third party as the case may be to have access to the Licensee s records and computer systems and to use software audit tools on the Licensee s systems to ensure that the Licensee is IAR SOFTWARE LICENSE AGREEMENT using its software in accordance with the applicable license terms Upon the Licensee s request the party conducting the audit with the Licensee shall enter into a non disclosure agreement with the Licensee to protect the Licensee s propriety and or confidential information Information retrieved and or conveyed to IAR Systems as a result of such an audit as here described shall be limited as to only ensure that the Licensee is using its software in accorda
12. and conditions governing such Third Party Owned software These supplemental terms add to the terms of this License and shall supersede any inconsistent or conflicting terms in this License as they pertain to the IAR SOFTWARE LICENSE AGREEMENT Third Party Owned software If the Product the Licensee receives hereunder contains Third Party Owned software the Licensee agree to comply with all terms and conditions imposed on you in respect of such Third Party Owned software 11 2 1 The Third Party Owned Software is subject to the additional terms of each Third Party and a copy of these supplemental terms is available at http www iar com en products software licenses 12 SUPPORT AND UPDATE AGREEMENT SUA 12 1 Excluding what is specified in Section 12 2 and or Section 7 of this Agreement this Agreement does not grant the Licensee any right whatsoever to any improvements modifications enhancements or updates to the Software or any other support services relating to the Software 12 2 To the extent that the license granted includes a time limited Support and Update Service the Licensee will be entitled to the services defined in the Support and Update Agreement SUA attached hereto In the case that the license granted does not include Support and Update Services or in the case where such services have expired the Licensee may depending on the nature of the granted license purchase additional periods of Support and Update Services 12 3
13. no longer function A leak in the vehicle A C system Exit current test and contact a Robinair authorized service center for more information Exit current test and contact a Robinair authorized service center for more information Exit current test and contact a Robinair authorized service center for more information Exit current test and contact a Robinair authorized service center for more information Exit current test and contact a Robinair authorized service center for more information Exit current test and perform repairs on vehicle A C system Filter has already been used on this machine Obtain new Robinair filter No 34728 Exit current test and replace the source tank Perform a charge process to remove refrigerant from ISV before any further recovery attempts Press F1 and refer to Unit Activation section in this manual to register the machine Exit current test and perform repairs on vehicle A C system Storage and Transportation of Equipment Storage Never leave the machine live if an immediate use is not scheduled 1 Disconnect the machine from its power supply 2 Loop the service hoses around the handle twice and attach them to the storage ports See Figure 13 3 Store the machine in a dry stable area away from flames and hot surfaces The temperature of the storage area should range between 25 C and 60 C 4 Lock th
14. previous vehicle serviced it is recommended the service hoses be flushed of residual oil to prevent contamination WARNING To prevent personal injury while working with refrigerant read and follow the 1 Select FLUSH HOSES from the Setup Menu The aa ond and warnings in this manual and wear protective equipment such as goggles and I gloves machine displays CONNECT HOSES TO STORAGE PORTS K AND OPEN COUPLER VALVES 2 Connect the service hoses to the machine s storage port connections as shown in Figure 3 3 Open the service hose coupler valves by turning the collars clockwise 4 Press the key to begin the hose flush process which runs for three minutes followed by a recovery 5 When the hose flushing process is compete the display reads FLUSH HOSES COMPLETE Press the gt gt key to exit and return to the Setup Menu 6 Close the coupler valves by turning the collars counterclockwise Storage Port Connections Figure 3 20 Operating Instructions Charge N de iilis Recharge the Vehicle A C System 34788NI model d Connect both service hoses to the vehicle s service ports While within the Main Menu press the CHARGE n key You will be prompted to enter service data Press the v key once complete to continue The display shows CHARGE XX XXX KG ON HIGH SIDE ADDITIONAL OIL XXX ML Us
15. publish distribute sublicense and or sell copies of the Software and to permit persons to whom the Software is furnished to do so subject to the following conditions Redistributions of source code must retain the above copyright notice this list of conditions and the following disclaimers Redistributions in binary form must reproduce the above copyright notice this list of conditions and the following disclaimers in the documentation and or other materials provided with the distribution Neither the names of the LIVM Team University of Illinois at Urbana Champaign nor the names of its contributors may be used to endorse or promote products derived from this Software without specific prior written permission THE SOFTWARE IS PROVIDED AS IS WITHOUT WARRANTY OF ANY KIND EXPRESS OR IMPLIED INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILIT Y FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT IN NO EVENT SHALL THE CONTRIBUTORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM DAMAGES OR OTHER LIABILITY WHETHER IN AN ACTION OF CONTRACT TORT OR OTHERWISE ARISING FROM OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS WITH THE SOFTWARE February 2013 Rev 5 IAR Third Party Software License Notices Boost Software License Version 1 0 August 17th 2003 Permission is hereby granted free of charge to any person or organization obtaining a copy of the software and accompanying documentation cov
16. refrigerant to ensure enough is available for charging 1 Connect the tank fill black hose to the liquid connector on a full source tank 2 Position the source tank in such a way that liquid refrigerant is supplied to the connection Open the source tank valve 3 Select TANK FILL from the Setup Menu The machine displays TANK FILL FILL AMOUNT XX XYY CHARGE CAPACITY XX XXYY RECOVER CAPACITY XX XXYY 4 Enter the quantity to recover and press the key Add at least 3 6 kg of refrigerant to ensure enough is available for charging 28 The machine begins filling the ISV and automatically stops when the preset tank fill level is reached To stop the tank fill before the preset level is reached press the il key An option to exit will appear on the display Once complete remove the hose from the source tank Maintenance Filter Maintenance The filter is designed to trap acid and particulates and to remove moisture from refrigerant To 29 meet the mandate for adequate moisture and 0428 WARNING To prevent personal contaminant removal the filter must be replaced ur EI the after 68 kg 150 Ibs of refrigerant has been duca and warnings in this filtered manual and wear protective The machine gives a warning when 125 kg 276 Vw equipment such as goggles and lbs of the filter capacity has been used the NE gloves machine locks down when the 68 kg 150 Ibs filter capacity ha
17. the AUTOMATIC cycle Your unit will now automatically proceed through all applicable functions RECOVER VACUUM AND CHARGE If the vehicle being serviced has previously undergone a recover and vacuum procedure the machine will only perform a CHARGE 34788 NI 34788NI H Rev B 10 When the AUTOMATIC COMPLETE screen appears it includes a summary of result If your unit has a printer you may print out the summary by pressing the print key Press the gt gt key to proceed You will be prompted to close the coupler valves and disconnect the hoses from the vehicle Press the gt gt key to recover any remaining refrigerant from the hoses Once the clear is complete you will be returned to the Main Menu The vehicle A C system is now ready to use m WARNING To prevent personal HE injury while working with refrigerant read and follow the instructions and warnings in this manual and wear protective N equipment such as goggles and gloves Information About Automatic Function The CHARGE function for vehicles equipped with a single service fitting should be carried out manually according to procedures in the vehicle manufacturer s service manual After the RECOVER process you will be prompted to Check oil bottle and enter oil to be injected The entered oil inject amount should be equal to the amount of oil drained and can be found by looking at the graduations on the drain bott
18. using the two screws removed in Step 4 13 Assemble the shroud back onto the machine and install the four screws removed in Step 2 The printer is now ready for use Replacement Parts and Glossary Replacement Parts Replacement Component Part No Calibration Weight 16214 Filter 34724 Oil Drain Bottle 19100 Oil Inject Bottle 19867 A CAUTION To prevent Printer 30038 personal injury use only Printer Paper 1 roll 34214 or 5607069 those repair parts called out LP Service Coupler 18190A in this parts list Items found in this parts list have been HP Service Coupler 18191A carefully tested and selected Service Coupler Set 18192 by Robinair high side red and low side blue couplers Hose Set without Couplers 71788 high side red and low side blue with filters Service Hose without Coupler low side blue with filter 70018 Service Hose without Coupler high side red with filter 70019 Hose Set without Couplers 71789 high side red and low side blue less filters Service Hose without Coupler low side blue less filter 70020 Service Hose without Coupler high side red less filter 70021 Vacuum Pump Oil quart 13203 Vacuum Pump Oil gallon 13204 Vinyl Dust Cover optional 17499 Glossary A C System The vehicle air conditioning system being serviced Evacuation Moisture and other non condensables are removed from an A C syste
19. where permitted and do not destroy will continue to be governed by this Agreement Your prior use will also continue to be governed by this Agreement LICENSE GRANT Exclusively in conjunction with Licensee s development and sale of a product containing a programmable processing unit e g a microprocessor microcontroller or digital signal processor supplied directly or indirectly from Freescale Freescale System and listed under By Products on the Freescale MQX website www freescale com mqx Freescale grants to you free of charge the non exclusive non transferable right 1 to use the Software 2 to reproduce the Software 3 to prepare derivative works of the Software 4 to distribute the Software and derivative works thereof in object machine readable form as part of a Freescale System and 5 to sublicense to others the right to use the distributed Software as included within the Freescale System You must prohibit your sublicensees from translating reverse engineering decompiling or disassembling the Software except to the extent applicable law specifically prohibits such restriction If you violate any of the terms or restrictions of this Agreement Freescale may immediately terminate this Agreement and require that you stop using and delete all copies of the Software in your possession or control COPYRIGHT The Software is licensed to you not sold Freescale owns the Software and United States copyright laws and interna
20. AGREEMENT The Apache Software License Version 1 1 Copyright c 1999 2003 The Apache Software Foundation All rights reserved Redistribution and use in source and binary forms with or without modification are permitted provided that the following conditions are met 1 Redistributions of source code must retain the above copyright notice this list of conditions and the following disclaimer 2 Redistributions in binary form must reproduce the above copyright notice this list of conditions and the following disclaimer in the documentation and or other materials provided with the distribution 3 The end user documentation included with the redistribution if any must include the following acknowledgment This product includes software developed by the Apache Software Foundation http www apache org Alternately this acknowledgment may appear in the software itself if and wherever such third party acknowledgments normally appear 4 The names Xerces and Apache Software Foundation must not be used to endorse or promote products derived from this software without prior written permission For written permission please contact apache apache org 5 Products derived from this software may not be called Apache nor may Apache appear in their name without prior written permission of the Apache Software Foundation THIS SOFTWARE IS PROVIDED AS IS AND ANY EXPRESSED OR IMPLIED WARRANTIES INCLUDING BUT NOT
21. Architecture See Section 11 2 below 3 11 Back up Copies The Licensee may make back up copies of the Software in machine executable code form only to be used in the event and to the extent that the copy of the Software received from IAR Systems fails to function is lost damaged or destroyed The Licensee warrants that it will make no other copies of the Software and will not allow authorize or assist others to copy any part or all of the Software in any form without the prior written approval of IAR Systems There may be no more copies than are necessary to form part of a reasonable back up cycle for the Licensee Back up copies of the Software may be kept by the Licensee in a bank deposit or other such secure place as is normally used by the Licensee for storage of its computer program back ups The rights for the Licensee under this section shall not in any case include any measures to affect or decrease the function of the software protection included in the software 3 12 An Evaluation License is solely intended for testing and evaluation purposes Any other use than for testing and evaluation is prohibited IAR Systems has no obligation to provide support or related services and no warranties IN NO EVENT SHALL IAR SYSTEMS BE LIABLE TO THE OTHER FOR ANY DIRECT INDIRECT INCIDENTAL SPECIAL CONSEQUENTIAL PUNITIVE OR TORT DAMAGES OF ANY NATURE OR KIND WHATSOEVER INCLUDING BUT NOT LIMITED TO LOST PROFITS IN CONNECTION WITH OR ARISING OUT OF THE
22. Charge process 3 You will now be prompted to enter service data Once complete press the v key to continue The display shows CHARGE XX XXX KG ON HIGH SIDE 4 Connect both service hoses to the vehicle s service ports and open coupler valves 5 Use the arrow keys and the numeric keypad to enter the desired charge amount 6 Using the arrow key maneuver to the charge path selection High Side is default To change press the CHARGE PATH key on the control panel This will allow you to toggle between high low and both side charge paths The text will change on the display to your current selection 7 Press the Y key to start the charge process Moving or bumping the machine at this point may result in an inaccurate charge When the charge cycle gets close to the desired weight value the machine slows down It will charge settle charge again settle etc 8 When the CHARGE COMPLETE screen appears it includes a summary of charge results If your unit has a printer you may print out the summary by pressing the print amp key Press the gt gt key to proceed to clear the service hoses 22 9 You will be prompted to close the coupler valves and disconnect the hoses from the vehicle Press the gt gt key to recover any remaining refrigerant from the hoses Once the hose clear is complete you will be returned to the Main Menu 10 The vehicle A C system is now ready to use Operating Instru
23. Coun mM Models 34788NI 34788NI H 3E E BL Recover Recycle Recharge Machine for R134A A C systems ROBINAIR COM 800 533 6127 BOE DISCLAIMER Information illustrations and specifications contained in this manual are based on the latest information available at the time of publication The right is reserved to make changes at any time without obligation to notify any person or organization of such revisions or changes Further ROBINAIR shall not be liable for errors contained herein or for incidental or consequential damages including lost profits in connection with the furnishing performance or use of this material If necessary obtain additional health and safety information from the appropriate government agencies and the vehicle refrigerant and lubricant manufacturers Table of Contents Safety Precautions 0 0 cece ee eee ees 2 Introduction Technical Specifications 0 0 ce ee eee 5 Features of the 34788NI 34788NI H 0 0 0 0 0 0 eee eee 6 Control Panel Functions 0 0 0 cece ee ee eee 7 Symbol Lependido sci a doce d eom SR WE OE SS RE ROR ERE HS 8 setup Menu FUNCTIONS i43 sonidos nonc tepeden Tata oy 10 Initial Setup Unpack the Machine llle ee 11 Unpack the Accessory Kits sue so sb eee E RRRORUR OR RA s RR TR 11 Power Up the Machine llle 11 Select Language 6 cx h 6 ek N RH a RERER REVERE REE REE ED REE ES 12 Select Units ci eiiean ce es 12 Set Dat
24. E NOW 2 Press the Y key to start the activation process The machine displays PRODUCT ACTIVATION PERSONAL PRODUCT CODE XXXXXXXXXXX FOR ACTIVATION CODE VISIT HTTPS REGISTER SERVICESOLUTIONSPORTAL COM ENTER CODE XXXXXXXXXXXX 3 Open a web browser on a personal computer and enter the web address shown in Step 2 4 Enter your user name and password and log in to the website Note If you are a first time user click the REGISTER button to create a user name and password 5 On the personal computer enter the Personal Product Code of your machine into the Product Activation key box on the website to receive an activation code 6 On the machine enter the activation code into the correct field Note Enter the code exactly as received Capitalization is required 7 Record the activation code on a piece of paper and file it in a secure place Press the J key 8 The machine displays ACTIVATION SUCCESSFUL Press the gt gt key The 34788NI 34788NI H has been activated 34788 NI 34788NI H Rev B 15 Operating Instructions Enter Service Data Enter Service Data After selecting any service function information about the vehicle may be entered into and stored in the machine s database 1 The machine displays ENTER SERVICE DATA NEW 2 Press the Y key to enter a new record or scroll to select a previously serviced vehicle and press the Y key Th
25. ECOVER ANYWAY OIL DRAIN HALTED OIL LIFE REMAINING XX XXX CHANGE OIL NOW 34788 NI 34788NI H Rev B Failed communication with relay board Not enough refrigerant in the ISV to perform a system flush After a desired weight is entered if the charge process will leave less than 1 27 kg 2 8 Ibs of refrigerant in ISV the charge function will not start Activation code entered into the machine is not correct Filter serial number entered into the machine is not correct System pressure is below 0 35 bar gauge Accumulator pressure failed to rise above 1 10 bar within the minute before an oil drain was supposed to occur Display shows filter capacity remaining until machine locks down Reset the relay board by pressing F2 If problem continues contact a Robinair authorized service center for more information Refer to Tank Fill in Maintenance section of this manual Refer to Tank Fill in the Maintenance section of this manual Verify activation code is entered exactly as received Capitalization is required Verify serial number entered matches serial number on filter Verify filter has not been used on machine previously Exit current test and perform repairs on vehicle A C system Verify high side red and low side blue hoses are connected and coupler valves open Press F1 to recover press F2 to bypass RECOVER and proceed to VACUUM Adequate pressure is required wi
26. HINE IN DIRECT SUNLIGHT Position the machine far from heat sources such as direct sunlight which can cause excessive temperatures The use of this machine under normal environmental conditions 10 C to 50 C keeps pressures under reasonable limits lt lt DO NOT USE THIS MACHINE OUTDOORS DURING RAIN OR HIGH HUMIDITY Protect the machine from conditions that may cause electrical failure or other hazards relating to ambient interaction DO NOT USE THIS MACHINE IN AREAS WHERE THERE IS A RISK OF EXPLOSION SET UP THE MACHINE ON AN EVEN SURFACE AND UNDER SUFFICIENT LIGHTING LOCK THE FRONT WHEELS AND DO NOT SUBJECT THE MACHINE TO VIBRATION Further information regarding health and safety may be obtained from the refrigerant manufacturer Protective Devices Robinair No 34788NI 34788NI H is equipped with the following protective devices Over pressure valves e A maximum pressure switch stops the compressor when excessive pressure is sensed A WARNING Tampering with these protective devices could result in serious injury Refrigerant Tank Test Official records and recurring tests necessary for pressurized instruments are governed by laws and or national regulations depending on the country where the refrigerant tank is used The system manager is responsible for respect of laws regulations and technical rules During normal service refrigerant tanks do not need maintenance Refer to the Maintenance section of this manual for m
27. LIMITED TO THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED IN NO EVENT SHALL THE APACHE SOFTWARE FOUNDATION OR ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT INDIRECT INCIDENTAL SPECIAL EXEMPLARY OR CONSEQUENTIAL DAMAGES INCLUDING BUT NOTLIMITED TO PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES LOSS OF USE DATA OR PROFITS OR BUSINESS INTERRUPTION HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY WHETHER IN CONTRACT STRICT LIABILITY OR TORT INCLUDING NEGLIGENCE OR OTHERWISE ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE This software consists of voluntary contributions made by many individuals on behalf of the Apache Software Foundation and was originally based on software copyright c 1999 International Business Machines Inc http www ibm com For more information on the Apache Software Foundation please see http www apache org LLVM Release License University of Illinois NCSA Open Source License Copyright c 2003 2011 University of Illinois at Urbana Champaign All rights reserved Developed by LLVM Team University of Illinois at Urbana Champaign http Ilvm org Permission is hereby granted free of charge to any person obtaining a copy of this software and associated documentation files the Software to deal with the Software without restriction including without limitation the rights to use copy modify merge
28. R THIS AGREEMENT FOR ANY SPECIAL INDIRECT INCIDENTAL OR CONSEQUENTIAL DAMAGES UNDER ANY LEGAL THEORY SUCH AS LOSS OF DATA USE AND OR PROFITS BUSINESS INTERRUPTION OR DOWNTIME COSTS AND CAPITAL COSTS OR CLAIM OF THIRD PARTY WHETHER ON ACCOUNT OF DEFECTS PERFORMANCES NON PERFORMANCES DELAYS PERSONAL INJURIES PROPERTY DAMAGES OR OTHERWISE REGARDLESS WHETHER IAR SYSTEMS HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES 10 4 NOTHING IN THIS AGREEMENT SHALL EXCLUDE OR LIMIT THE LIABILITY UNDER APPLICABLE COMPULSORY LAW OF IAR SYSTEMS FOR DEATH OR PERSONAL INJURY RESULTING FROM ITS NEGLIGENCE 10 5 The provisions of this Article 10 shall survive the cancellation or termination of this Agreement 11 THIRD PARTY RIGHTS 11 1 The IAR Embedded Workbench for Eclipse includes Eclipse Materials This License does not apply to such Eclipse Material and this is not included in the term Software under this License You agree to comply with all terms and conditions imposed on you in respect of such Eclipse Materials 11 1 1 The Eclipse Materials are licensed under the terms of the Eclipse Public License EPL Version 1 0 a copy of which is included in the Eclipse Materials and also available at http www opensource org licenses eclipse 1 0 php 11 2 The IAR Embedded Workbench may include Third Party Owned software In addition to all other provisions of this License the Third Party Owned software shall also be subject to the supplemental terms
29. SURE TEST OR LEAK TEST THE MACHINE OR VEHICLE AIR CONDITIONING SYSTEM Mixtures of air and R134a refrigerant can be combustible at elevated pressures These mixtures are potentially dangerous and may result in fire or explosion causing personal injury and or property damage HIGH VOLTAGE ELECTRICITY INSIDE THE MACHINE HAS A RISK OF ELECTRICAL SHOCK Exposure may cause personal injury Disconnect the power before servicing the machine NEVER LEAVE THE MACHINE LIVE IF AN IMMEDIATE USE IS NOT SCHEDULED Disconnect the electrical supply before a long period of inactivity or before internal maintenance is performed To ensure that unauthorized personnel cannot run the machine use the Lockout Tag Out feature DO NOT MODIFY THE PRESSURE RELIEF VALVE OR CHANGE THE CONTROL SYSTEM SETTINGS Using the machine in a manner for which it was not designed will compromise the machine and nullify the protections provided 34788 NI 34788NI H Rev B 3 Safety Precautions CAUTION To prevent equipment damage A TO PREVENT CROSS CONTAMINATION USE THIS MACHINE WITH R134A REFRIGERANT ONLY 17 The machine is equipped with special connectors to recover recycle and recharge only R134a X refrigerant Do not attempt to adapt the machine for another refrigerant Do not mix refrigerant types through a system or in the same container mixing of refrigerants will cause severe damage to the machine and the vehicle air conditioning system DO NOT USE THIS MAC
30. SYMBOL Pressing the key under this icon will pause the current process RESUME SYMBOL Pressing the key under this icon will resume a process that has been paused PRINT SYMBOL Pressing the key under this icon will print a summary corresponding to the current completed process DELETE SYMBOL Pressing the key under this icon will delete a selected entry from the memory of the machine 34788 NI 34788NI H Rev B 9 Introduction Setup Menu Functions Access the following functions by pressing the Menu key and selecting Setup Calibration Check Use to verify internal scale calibration Refer to Calibration Check in the Maintenance section of this user manual Edit Print Header Programs information that will appear on the printout each time a print function is used Filter Maintenance The filter removes acid particulates and moisture from the refrigerant To meet requirements it is mandatory to replace the filter after 150 kg 331 Ibs of refrigerant has been filtered This menu item displays the filter capacity remaining until the machine locks down and no longer functions Refer to Filter Maintenance in the Maintenance section Flush Hoses Flushes residual oil from the machine s service hoses to prepare for service of next vehicle Production Menu For Robinair production use only Pump Maintenance Displays the amount of time remaining until the next vacuum pump oil change is needed For maximum
31. SYSTEMS UNDER THIS SECTION 8 MAY NEVER EXCEED THE LICENSE FEE PAID BY THE LICENSEE 9 FORCE MAJEURE 9 1 Either party shall be excused from fulfilment of any obligation under this Agreement only to the extent that and for so long as such performance is prevented or delayed by an industrial dispute or any other cause beyond its reasonable control such as but not limited to riots floods war warlike hostilities fires embargo shortage of labor power fuel means of transportation or common lack of other necessities A party wishing to claim relief under this Article shall forthwith notify the other party in writing on the intervention and on the cessation of such circumstance 10 LIMITATION OF LIABILITY 10 1 THE USE OF THE SOFTWARE AND ALL CONSEQUENCES ARISING THEREFROM IS THE SOLE RESPONSIBILITY OF LICENSEE IAR SYSTEMS SHALL NOT BE LIABLE TO THE LICENSEE FOR ANY LOSS OR DAMAGE CAUSED ARISING DIRECTLY OR INDIRECTLY IN CONNECTION WITH THE SOFTWARE THE USE OF THE SOFTWARE OR OTHERWISE 10 2 IAR SYSTEMS LIABILITY VIS A VIS THE LICENSEE UNDER THIS AGREEMENT SHALL UNDER ALL CIRCUMSTANCES BE LIMITED TO FIFTY 50 PER CENT OF THE LICENSE FEE FOR THE SOFTWARE PAID BY THE LICENSEE HEREUNDER PROVIDED HOWEVER THAT IF SECTION 8 IS APPLICABLE THE TOTAL LIABILITY OF IAR SYSTEMS HEREUNDER MAY INSTEAD NEVER EXCEED 10096 OF THE LICENSE FEE PAID BY THE LICENSEE HEREUNDER FOR SUCH SOFTWARE 10 3 IAR SYSTEMS SHALL IN NO EVENT BE LIABLE TO THE LICENSEE UNDE
32. THE PRODUCT 1 DEFINITIONS The following terms have the meanings set forth below whenever they are used in this Agreement 1 1 Executable Software means a copy of the executable code version of the software program s included in the enclosed package or otherwise specified in this Agreement or Invoice including any link time and runtime modules along with templates and other instructions and any Software updates revisions and additional modules and templates if any that the Licensee may receive from IAR Systems hereunder from time to time 1 2 Software Source Code has the meaning set out in section 3 7 1 3 Software is a collective term for Executable Software and Software Source Code as defined above 1 4 Documentation means a copy of the documentation as provided by IAR Systems together with the Software for use by the Licensee 1 5 Product means the Software and Documentation licensed to the Licensee under the conditions of this Agreement 1 6 Invoice means IAR Systems or IAR Distributor s invoice to the Licensee for the Product license granted hereunder 1 7 PC locked License has the meaning set out in section 3 2 1 8 Mobile License has the meaning set out in section 3 3 1 9 Multi user License has the meanings set out in section 3 4 1 10 Network License has the meanings set out in section 3 5 1 11 Global Network License has the meanings set out in section 3 6 1 12 Concurrent User
33. USE OR PERFORMANCE OF SOFTWARE SUPPORT MATERIALS OR THE PROVISION OF SERVICES EVEN IF THE OTHER PARTY HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES Section 11 in this Software License Agreement may also apply to an Evaluation License 4 LICENSE RESTRICTIONS 4 1 The Licensee may not remove make emulation reverse engineer decompile or disassemble the Executable Software Licensee is not allowed to derive the source or assembly code of files provided in executable or object formats The Licensee accepts that all information gained about the Software is the valuable intellectual property of IAR Systems and as such must be treated as confidential as described under Article 5 The Licensee warrants that it will not sell license lease rent loan lend transmit network communicate or otherwise distribute or transfer the Software in any manner to any third party whether on a permanent or temporary basis except as explicitly stated in this Agreement Furthermore the Licensee warrants that it will not use or permit the use of including without limitation by time sharing or network use the Software for the benefit of any entity other than the Licensee or in a computer service business make unauthorized copies of the documentation make verbal or media translations of the documentation make telecommunications data transmissions of the Software use long haul gateways on any central processing unit on which the Software is used The Licensee is
34. achine Remove the oil bottle Remove the four screws holding the shroud See Figure 8 3 Hang the shroud on the back of the machine as shown in Figure 9 4 Remove the filter by turning it counterclockwise as viewed from the bottom of the filter 5 Look at the new filter verify both o rings are lubricated and correctly located in the grooves as shown in Figure 9 6 Install the new filter by threading it clockwise into place Verify the filter is positioned correctly as shown in Figure 9 Tighten the filter to 20 N m Figure 8 Hang Shroud Here Filter Figure 9 30 Maintenance Calibration Check This function is used to ensure the machine s internal scale is always calibrated During this test use only the calibration weight that is provided with the machine b 2 Refer to Figure 10 and verify the magnet on the bottom of the machine is clean Select CALIBRATION CHECK from the Setup Menu The machine displays PLACE CALIBRATION WEIGHT ON MAGNET LOCATED ON THE BOTTOM OF THE UNIT 3 4 Attach the calibration weight to the magnet on the bottom of the machine Select the Y key to continue The machine displays REMOVE CALIBRATION WEIGHT FROM MAGNET LOCATED ON THE BOTTOM OF THE UNIT Remove the calibration weight from the magnet Select the Y key to continue If the display shows CALIBRATION CHECK PASSED the scale is in calibrat
35. and flush information for up to 25 vehicles The information loaded into Edit Print Header will appear on each printout If you want to add a printer to your machine refer to Printer Installation in the Maintenance section of this manual 1 Enter text by using the arrows and the multi tap interface on the numeric keypad e LEFT arrow and 3 key acts as backspace keys RIGHT arrow moves the cursor to the right ZERO 0 key acts as a spacebar when double tapped UP and DOWN arrows navigate between the rows 2 Press the Y key to save exit the function press the X key to return to the previous header without saving data 12 Initial Setup Service Vacuum At this point the machine clears its internal plumbing before proceeding with setup 1 Check the vacuum pump oil level sight glass and verify the oil level is at the center of the sight glass 2 When prompted connect the service hoses from the machine to their storage ports as shown in Figure 1 Press the gt gt key to continue THQ 3 The machine enters a 5 minute vacuum and oF i Service Hoses will automatically enter the next set up process Connected to when complete Storage Ports Select Oil Viscosity 34788NI model The oil inject functionality in this machine is automatic and timing based The viscosity of the Figure 1 oil being injected significantly affects the accuracy 1 Using the arrow keys high
36. are is recorded upon receipt by the Licensee will be free from defects in materials and faulty workmanship under normal use for a period of ninety 90 days from the date of delivery to the Licensee During this warranty period IAR Systems will at its option after its receipt of the media in return repair or replace free of charge defective media upon which the Software was supplied and record a copy of the Software on the repaired or replacement media Said repair or replacement shall be the Licensee s exclusive remedy under this media warranty Notwithstanding the foregoing IAR Systems shall have noresponsibility to repairorreplace a media which in IAR Systems opinion has been damaged by the Licensee by accident abuse or as aresult of attempted self maintenance service 7 2 IAR Systems does not warrant that the Software will meet the Licensee s requirements or that the operation of the Software will be uninterrupted and error free The Licensee is solely responsible for the selection of the Software to achieve its intended results or for the results actually obtained 7 3 The above warranty does not apply to conditions resulting from improper use external causes including service or modifications not performed by IAR Systems ora contractor appointed by IAR Systems or operation outside the specified environmental parameters IAR Systems will not be responsible for operation of the Software other than on the host equipment specified in the Invoi
37. ays vehicle information that was entered into the Enter Service Data screen Vehicles are displayed by date of service and VIN number The database stores 25 VIN entries Hose Equalize Use this Setup Menu item to recover refrigerant from the service hoses back into the vehicle A C system This item is useful after performing diagnostics which do not require the need to recover the A C system into the RRR machine You will be prompted to connect the low side service hose to the appropriate port and to start the vehicle s A C system on max Initial Setup Unpack the Machine 29 1 Remove the bandings from the box WARNING To prevent personal 2 Remove the top carton infold the molded pulp injury while working with tray and the angle boards refrigerant read and follow the 3 Remove the sleeve from the bottom carton instructions and warnings in this manual and wear protective intog Y equipment such as goggles and 4 Gently roll the unit forward and off the pallet NE gloves avoiding any sudden shocks to the machine Unpack the Accessory Kit Unpack the accessory kit from the box and remove the plastic packaging Accessory Kit Calibration Weight 533 g Pouch containing the user manual warranty card to be filled out and mailed Material Safety Data Sheets MSDSs and service center list Power Up the Machine 1 Unwind the power cord from the handle and plug it into a c
38. ce and in conjunction with the operating environment designated for each version of the Software Minor deviations from the above warranty which are of little importance for the intended use of the Software and which do not cause more than minor inconvenience for the Licensee shall not be considered as breaches of the above warranty 7 4 THE ABOVE WARRANTY IS IAR SYSTEMS ONLY WARRANTY WITH REGARD TO THE SOFTWARE AND THIS AGREEMENT AND SAVE AS PROVIDED IN THIS AGREEMENT NO OTHER WARRANTY OR CONDITION EXPRESSED OR IMPLIED WILL APPLY AND THE LICENSEE WILL NOT RAISE ANY OTHER CLAIMS BASED ON THE PERFORMANCE OR LACK OF PERFORMANCE OF THE SOFTWARE IAR SYSTEMS SPECIFICALLY EXCLUDES ALL OTHER WARRANTIES REPRESENTATIONS OR UNDERTAKINGS EXPRESS IMPLIED OR STATUTORY INCLUDING BUT NOT LIMITED TO ANY IMPLIED WARRANTIES OF February 2013 Rev 5 IAR SOFTWARE LICENSE AGREEMENT MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ABILITY TO ACHIEVE A PARTICULAR RESULT OR OF ANY OTHER WARRANTY OBLIGATION ON THE PART OF IAR SYSTEMS 7 5 IAR Systems expressly disclaims any liability for any hardware or software solutions at the Licensee which may affect the performance of the Software including but not limited to network configurations 7 6 The provisions of this Article 7 shall survive any expiration or termination of this Agreement 8 INTELLECTUAL PROPERTY INFRINGEMENT 8 1 IAR Systems will in the way set out in 8 2 and subject to all limitations t
39. ctions Automatic ame Automatic Function The AUTOMATIC function allows a user to perform an automatic recovery vacuum leak test and or charge sequence A total automatic sequence may take up to an hour to complete 1 Connect high side red and low side blue service hoses to the A C system 2 Open the service hose coupler valves by turning the collars clockwise 3 While within the Main Menu press the AUTOMATIC amp key on the control panel The display shows VACUUM TIME XX XX VACUUM LEAK TEST ON CHARGE XX XXX KG ON HIGH SIDE ADDITIONAL OIL XXX ML 4 Use the numeric keypad to enter the desired length of vacuum 5 Using the arrow key maneuver downwards to the choose whether to perform a vacuum leak test or not ON is the default setting To toggle press the I 0 key on the control panel 6 Using the downwards arrow key maneuver to the charge amount entry field Use the arrow keys and numeric keypad to enter the desired charge amount 7 Using the arrow key maneuver to the charge path selection High Side is default To change press the key on the control panel This will allow you to toggle between high low and both side charge paths The text will change on the display to your current selection 8 Using the arrow key maneuver to the additional oil entry field Use the numeric keypad to enter the desired additional oil inject amount 9 Press the key to begin
40. deep recovery process 34788 NI 34788NI H Rev B 9 WARNING To prevent personal injury while working with refrigerant read and follow the instructions and warnings in this manual and wear protective equipment such as goggles and NE gloves Oil Drain Bottle Figure 2 17 Operating Instructions Recover Recover Refrigerant from a Vehicle continued 8 After recovery the machine will perform an oil drain which may require up to 90 seconds to complete 9 After the oil drain is complete a summary is displayed showing the total amount of gas recovered You are also prompted to Check Oil Drain Bottle to note how much oil was drained bosed on the graduations seen on the drain bottle If your machine has a printer you may print out recovery information and pre recover diagnostics by selecting the amp key Press the key to return to the Main Menu Note The displayed recovered weight can vary depending on ambient conditions and should not be used as an indicator of scale accuracy 10 The amount of oil that was removed from the A C system is the amount of new oil that should be charged into the A C system after evacuation is complete Use only new oil to replace the oil removed during the recycling process e Dispose of used oil according to government regulations Recovery is complete If your machine has a printer you may print out vacuum information by selecting the
41. e and Time 0 ee eens 12 Edit Print Headers x uu oeste ean us Pen b n 12 Service Vacuum s eeaeee kma k a a a s 13 Select Oil Viscosity 34788NI model 000 00 13 Adjust Background Fill Target cc s sake oer a5 ee EURO 13 uus R 13 Unit ACtIVatilOn s xau em UR GER Ger db waa RETE Rr E 15 Operating Instructions Enter Service Data s orais ama po llle 16 RECOVERS ou eder FSS Pe xu e eon eee hbo ee Sed Syd 17 Mac bleue cras gts Ses ac nte er ure e setts te 6 46g e e e E GX eas p S Deere tens d 19 Flush HOSES deer ha CE aUa Oe due deed RACER S 3 Rs 20 CHUDE oua a eee ak atre eis deba vr sea ta Uh UP eae Ed 21 AULOMALC 2 sesri pree uT ecu ese SUCRE Pare vu RE DPI dq ES 23 System Flush 4 54 irae ded oh eR Eee e e RICE em CR CR CN 24 Maintenance Schedule suu eee cioe down a a oe RR RR a a Rd c 26 Electrical Protections usb ke rh REA RES 4 27 Load Lanes se uad ov He a DONE RS RESI IP dig d 27 Adjust Background Fill Target nananana aaa 28 Tank Fill iaae aoia aii a a a a tact a Beene E eia eich wand ce EA 28 Filter Maintenance 0 ce ee 29 Calibration Check os uvae ok wa ed x oy wwe we fe RA e 31 Change Vacuum Pump Oll 4 423 x ack eax 2 PS OA ER Ao RO CR 32 Leak Check cc cc ee es 33 Select Oil Viscosity 34788NI model 000 000 34 Edit Print Header J 2 oq haves oot wait arth oos RR a s C 35 Replace Printer Paper scele 35 InstallaPrinter llle RR RII 36 Replaceme
42. e front wheels Hose couplers connected to storage ports Transportation of Equipment A WARNING To prevent personal injury should the machine require transport to a local Robinair service center follow local government regulations regarding transportation of equipment containing R134a Figure 13 34788 NI 34788NI H Rev B 41 Disposal of Equipment Disposal of Equipment At the end of its useful life dispose of the R134a machine according to current government regulations Public administration and producers of electrical electronic equipment EEE are involved in facilitating the processes of the re use and recovery of waste FY electrical electronic equipment through the organization of collection activities and the use of appropriate planning arrangements n accordance with European Directive WEEE 2002 96 EC special collection sites are available for waste electrical electronic equipment Do not dispose of this equipment as miscellaneous solid municipal waste Arrange to have it collected separately Unauthorized disposal of waste electrical electronic equipment is punishable by law with appropriate penalties The reuse and correct recycling of electrical electronic equipment EEE is required for the protection of the environment and the well being of humans Disposal of Recycled Materials It is the responsibility of the user to determine if a material is a hazardous waste at the time
43. e highlighted selection will be in red The machine displays ENTER SERVICE DATA VIN MILEAGE MAKE MODEL 3 Use the arrow keys to move between rows and the multi tap keypad to enter text Information entered on this screen is stored by date and vehicle identification number VIN The database stores the most current 25 entries with the most recent at the top of the list The information will also appear on service summary printouts if using the 34788NI 344788NI H machine 16 Operating Instructions Recover iil Recover Refrigerant from a Vehicle Empty the oil drain bottle before starting a recovery Remove the oil drain bottle from the machine by pulling the bottle straight down do not use a twisting or rocking motion Refer to Figure 2 Connect the high side red and low side blue service hoses to the vehicle A C system Open the coupler valves on the hoses by turning the collars clockwise While within the Main Menu press the RECOVER Zw key on the control panel The machine will enter the service data entry form Enter all applicable data and press the Y key to continue The machine begins the recovery process The clicking noise indicates the solenoid is opening and closing this is normal The machine runs a self clearing cycle to clear any internal refrigerant from its internal plumbing System recovery begins and includes a timed vacuum
44. e the arrow keys and the numeric keypad to enter the desired charge amount Using the arrow key maneuver to the charge path selection High Side is default To change press the CHARGE PATH key on the control panel This will allow you to toggle between high low and both side charge paths The text will change on the display to your current selection You may also choose to inject oil to the system during the charge Use the numeric keypad to enter the desired oil inject amount Make sure there is available oil in the oil inject bottle located on the backside of the machine If injecting oil you should also verify that the correct oil viscosity is currently set on your machine See section Select Oil Viscosity Press the Y key to start the charge process Moving or bumping the machine at this point may result in an inaccurate charge When the charge cycle gets close to the desired weight value the machine slows down It will charge settle charge again settle etc When the CHARGE COMPLETE screen appears it includes a summary of charge results If your unit has a printer you may print out the summary by pressing the print amp key Press the gt gt key to proceed to clear the service hoses You will be prompted to close the coupler valves and disconnect the hoses from the vehicle Press the gt gt key to recover any remaining refrigerant from the hoses Once the hose clear is complete yo
45. egistered trademarks of their respective companies and are hereby acknowledged The following notices pertain to this Bosch Automotive Service Solutions software license 1 This product contains IAR Standard libraries IAR software license agreement is reported below and located at http www iar com Global Products Software licenses SLA February 2013 pdf IAR standard library includes third party software as declared in the third party licenses document reported below and located at http www iar com Global Products Software licenses 3rdpartyLicenses html 2 This product contains LibTomCrypt is a fairly comprehensive modular and portable cryptographic toolkit that provides developers with a vast array of well known published block ciphers one way hash functions chaining modes pseudo random number generators public key cryptography and a plethora of other routines http www libtom org LibTomCrypt is public domain As should all quality software be Tom St Denis 3 This product contains Freescale software as part of the Freescale microcontroller BSP Refer to the Freescale Semiconductor License Agreements for the use terms below reported and located at https www freescale com webapp sps download license jsp colCode DI MQX CX amp prodC ode MQX amp appType zfile2 amp locationznull amp DOWNLOAD ID null amp fsrch 1 amp sr 1 amp pageNum 1 amp P arent nodeld amp Parent pageType February 2013 Rev 5 IAR SOFTWARE LICENSE AGREEMENT
46. ered by this license the Software to use reproduce display distribute execute and transmit the Software and to prepare derivative works of the Software and to permit third parties to whom the Software is furnished to do so all subject to the following The copyright notices in the Software and this entire statement including the above license grant this restriction and the following disclaimer must be included in all copies of the Software in whole or in part and all derivative works of the Software unless such copies or derivative works are solely in the form of machine executable object code generated by a source language processor THE SOFTWARE IS PROVIDED AS IS WITHOUT WARRANTY OF ANY KIND EXPRESS OR IMPLIED INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY FITNESS FOR A PARTICULAR PURPOSE TITLE AND NON INFRINGEMENT IN NO EVENT SHALL THE COPYRIGHT HOLDERS OR ANYONE DISTRIBUTING THE SOFTWARE BE LIABLE FOR ANY DAMAGES OR OTHER LIABILITY WHETHER IN CONTRACT TORT OR OTHERWISE ARISING FROM OUT OF ORIN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE Protocol Buffers Google s data interchange format Copyright 2008 Google Inc All rights reserved http code google com p protobuf Redistribution and use in source and binary forms with or without modification are permitted provided that the following conditions are met Redistributions of source code must retain the above c
47. for breathing resulting in drowsiness and dizziness Exposure to high concentrations of R134a causes asphyxiation injury to the eyes nose throat and lungs and can affect the central nervous system Use the machine in locations with mechanical ventilation that provides at least one air change per hour If accidental system discharge occurs ventilate the work area before resuming service DO NOT DISPERSE REFRIGERANT INTO THE ENVIRONMENT Such a precaution is necessary to prevent the possible presence of refrigerant in the working environment TO REDUCE THE RISK OF FIRE do not use the machine in the vicinity of spilled or open containers of gasoline or other flammable substances TO REDUCE THE RISK OF FIRE do not use an extension cord An extension cord may overheat and cause fire If you must use an extension cord use the shortest possible cord with a minimum size of 14 AWG TO REDUCE THE RISK OF FIRE do not use the machine in the vicinity of flames and hot surfaces Refrigerant can decompose at high temperatures and can free toxic substances to the environment which can be noxious to the user TO REDUCE THE RISK OF FIRE do not use the machine in environments containing explosive gases or vapors TO REDUCE THE RISK OF FIRE do not use this machine in ATEX classified zones or areas Protect the machine from conditions that may cause electrical failure or other hazards relating to ambient interaction DO NOT USE COMPRESSED AIR TO PRES
48. herein act on any action brought against the Licensee to the extent it is based on a claim that the Software as it exists on the date of the Invoice infringes any patent or copyright duly issued under the laws of the country under which IAR Systems or the Licensee is organized 8 2 IAR Systems shall in the way set out below as sole remedy act on a third party claim that the Software infringes the intellectual property rights of such party provided that IAR Systems is given prompt notice of such claim and is given information reasonable assistance and sole authority to defend or settle the claim IAR Systems may at its option obtain the right for the Licensee to continue using the infringing IAR Product replace or modify the infringing Product until it becomes non infringing or if such replacement or modification is not reasonably available terminate this license with respect to the infringing Product and provide for a reasonable refund of fees paid by the Licensee to IAR Systems for the IAR Product so affected 8 3 IAR Systems shall not have any liability if the alleged infringement arises out of unauthorized use of the Software postdelivery non IAR Systems modifications or the combination with other products or devices not furnished by IAR Systems THE OBLIGATIONS STATED IN THIS SECTION ARE IAR SYSTEMS SOLE LIABILITIES AND THE LICENSEE S SOLE REMEDIES FOR INFRINGEMENT OF PATENTS AND COPYRIGHTS FOR THE AVOIDANCE OF DOUBT THE LIABILITY OF IAR
49. his software and associated documentation files the Software to deal in the Software without restriction including without limitation the rights to use copy modify merge publish distribute and or sell copies of the Software and to permit persons to whom the Software is furnished to do so provided that the above copyright notice s and this permission notice appear in all copies of the Software and that both the above copyright notice s and this permission notice appear in supporting documentation THE SOFTWARE IS PROVIDED AS IS WITHOUT WARRANTY OF ANY KIND EXPRESS OR IMPLIED INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILIT Y FITNESS FORA PARTICULAR PURPOSE AND NONINFRINGEMENT OF THIRD PARTY RIGHTS IN NO EVENT SHALL THE COPYRIGHT HOLDER OR HOLDERS INCLUDED IN THIS NOTICE BE LIABLE FOR ANY CLAIM OR ANY SPECIAL INDIRECT OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE DATA OR PROFITS WHETHER IN AN ACTION OF CONTRACT NEGLIGENCE OR OTHER TORTIOUS ACTION ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE Except as contained in this notice the name of a copyright holder shall not be used in advertising or otherwise to promote the sale use or other dealings in this Software without prior written authorization of the copyright holder All trademarks and registered trademarks mentioned herein are the property of their respective owners IAR SOFTWARE LICENSE
50. icensor acknowledges and agrees that Sub Licensee shall have no obligation to deliver or disclose to Licensor any modifica tions that Sub Licensee makes to the Licensed Source ant that Sub Licensee shall own and have exclusive marketing rights to any such undisclosed modifications d Sub Li censee acknowledges and agrees that any modifications that Sub Licensee makes to the Licensed Source and discloses to Licensor unless otherwise indicated in writing by Sub Licensee on or before disclosure Disclosed Modifications shall become the property of Plauger Disclosed Modifications to the Licensed Library Source shall become the property of Plauger Sub Licensee hereby assigns to Plauger all of Sub Licensee s right title and interest in and to such Disclosed Modifications and in and to the copyrights and all other rights in the Disclosed Modifications b License a Licensor hereby grants Dinkum to Sub Licensee a personal non exclusive and non transferable license to use or modify C Library the Licensed Source for its own internal business purposes solely in conjunction with IAR C EC C Cross Compiler owned by IAR Systems b Notwithstanding the forego ing Sub Licensee may make only such copies of the Licensed Source as are reasonably necessary for it to exercise its right hereunder Sub Licensee acknowledges that it may not sell assign sublicense lease or otherwise transfer or permit others to use or exe cute the Licensed Source or an
51. in a function or process HELP SYMBOL Pressing the key under this icon will provide help and information e corresponding to the current screen and or function being viewed or performed DATABASE SYMBOL Pressing the key under this icon will enter the vehicle database retrieval process SETUP MENU SYMBOL Pressing the key under this icon will enter the Setup Menu YES ACCEPT SYMBOL Pressing the key under this icon will accept any choices made on the current screen and proceed to the next step of the function NO CLOSE SYMBOL Pressing the key under this icon will reject any choices made on the current screen and return to the previous step of the function or the Main Menu eS m Introduction 3 E JE 1 0 RETRY SYMBOL Pressing the key under this icon will retry the current process or function CHARGE PATH SELECTION SYMBOL Pressing the key under this icon will toggle the desired path of refrigerant charge between high side low side and both side OIL INJECT BOTTLE SELECTION SYMBOL Pressing the key under this icon will toggle which bottle will be utilized to inject oil during the subsequent charge Only applicable on machines with more than oil inject bottle ON OFF SYMBOL Pressing the key under this icon will toggle the highlighted function on or off as desired BACKSPACE SYMBOL Pressing the key under this icon will delete a text character to the left of the current selection PAUSE
52. ion Select the key to return to the Setup Menu If the display shows CALIBRATION CHECK FAILED RETRY the scale is out of calibration You may press the 45 key again to retry If calibration continues to fail contact an authorized Robinair service center for assistance 34788 NI 34788NI H Rev B Figure 10 31 Maintenance Change Vacuum Pump Oil 1 Select PUMP MAINTENANCE from the Setup Menu or when prompted The display shows how long the vacuum pump has operated since the last oil change OIL LIFE REMAINING XXX XX HHH MM CHANGE OIL NOW 2 Press the Y key to change vacuum pump oil If the machine displays WARMING OIL FOR DRAIN XX XX allow the vacuum pump to run for two minutes to warm up the oil If the oil is already warm the display shows DRAIN USED OIL FROM PUMP AND REPLACE WITH 150 ML OF NEW OIL REMOVE FILL CAP TO SPEED DRAINING OF OIL 3 SLOWLY open the oil fill cap to verify there is no pressure in the machine Then carefully remove the cap See Figure 11 4 Remove the oil drain fitting cap and drain the oil into a suitable container for disposal Replace the cap and close tightly Press the gt gt key to continue 5 The machine displays FILL VACUUM PUMP TO THE CENTER OF THE SIGHT GLASS REPLACE FILL CAP Slowly add vacuum pump oil to the pump through the oil fill port until the oil reaches the center of the sight gla
53. it is contaminated Before the machine begins evacuating the A C system it checks for pressure in the system that could damage the vacuum pump In this case system pressure is above 0 35 bar gauge Press F1 to retry CALIBRATION CHECK If calibration continues to fail exit current test and contact a Robinair authorized service center for repair Verify connections are secure and valves are in correct position Contact a Robinair authorized service center for more information Contact a Robinair authorized service center for more information Refer to Filter Maintenance section of this manual for instructions to change vacuum pump oil Allow machine to cool before performing additional A C service If problem continues contact a Robinair authorized service center for more information Do not recover contaminated refrigerant into the 34788NI 34788NI H use an external refrigerant recovery machine dedicated to contaminated refrigerant Press F1 Refer to RECOVER section of this manual to recover refrigerant before proceeding Troubleshooting Messages Display Case Solution O POWER BOARD COMMUNICATION FAILED INSUFFICIENT REFRIGERANT 6 00 KG REQUIRED FOR SYSTEM FLUSH INSUFFICIENT REFRIGERANT AVAILABLE FOR CHARGE SELECTED XX XXYY AVAILABLE XX XXYY INVALID CODE INVALID SERIAL NUMBER LEAK TEST FAILED A leak in the vehicle A C system NO PRESSURE ON INLETS CHECK CONNECTIONS R
54. le If RECOVER was not performed the amount of oil to be injected may be entered while programming the CHARGE information If problems are encountered during the automatic sequence an audio alert sounds three times The sequence remains paused until the user enters a decision regarding how to proceed 23 Operating Instructions System Flush System Flush The SYSTEM FLUSH function is performed using a vehicle manufacturer approved flushing adapter 29 Refer to the instructions included with the adapter WARNING To prevent personal also as you perform the following steps injury while working with refrigerant read and follow the 1 Verify the flusher filter and strainer are not es instructions and warnings in this plugged TES manual and wear protective 2 Mount the flusher to the rear of the Robinair O equipment such as goggles and machine Do not make any connections at this gloves time 3 Remove the oil drain bottle see Figure 4 from the Robinair machine Drain the oil bottle and dispose of the oil according to regulations in your area Reinstall the oil drain bottle on the machine 4 Recover all refrigerant from system to be flushed 5 Note the amount of oil collected during recovery This amount must be replaced as well as any oil collected during flush Note The amount of oil collected and reported during System Flush does not include the amount of oil collected during the initial recovery 6
55. light your desired PAG oil viscosity 46 100 125 or 150 Once highlighted press the v key to accept your choice 2 The unit is now ready to accurately inject your chosen oil Adjust Background Fill Target This machine possesses a background tank fill feature An external refrigerant storage vessel can be fluidly connected to the machine using the black tank fill hose for a continuous topping off of the internal storage vessel Drawing from the refrigerant within the connected external storage vessel the machine will periodically charge the ISV tank to the desired fill target Using the arrows and the numeric keypad enter the desired fill target default amount is 6 8 kg Tank Fill Note This procedure transfers refrigerant from a source tank to the internal storage vessel ISV in the Charge Capacity The amount of machine The maximum capacity of the ISV is refrigerant in the ISV that can be charged 10 kg 22 lbs Use arrow keys to move the cursor into a vehicle A C system use the keypad to enter a value Recover Capacity The amount of 1 The machine displays fields for desired tank additional refrigerant that could be fill amount charge capacity and the amount recovered into the ISV of recoverable refrigerant recover capacity within the internal storage vessel Enter the 34788 NI 34788NI H Rev B 13 Initial Setup Tank Fill contd re 8 desired tank fill amount Note Add at least 3 6 kg
56. m by a vacuum pump Internal Storage Vessel ISV The refillable refrigerant storage tank designed specifically for this machine 10 kg 22 lbs capacity Leak Test Vacuum Components containing refrigerant are evacuated and monitored for pressure rise which could indicate a leak Machine Model No 34788NI 34788NI H Leak Check Components containing refrigerant are pressurized and monitored for pressure decay which could indicate a leak Recovery Recycling Refrigerant is recovered from an A C system filtered and stored in the ISV Refrigerant R134a 34788 NI 34788NI H Rev B 37 Troubleshooting Messages Display Case Solution O CALIBRATION CHECK FAILED CHARGE STALLED CHECK CONNECTIONS AND VALVES DATABASE NOT INSTALLED EXCESS TANK WEIGHT FILTER EXHAUSTED FILTER WEIGHT XXX XYY REPLACE FILTER NOW HIGH PRESSURE IN ISV IDENTIFY REFRIGERANT PURITY TEST FAILED INLET PRESSURE IS TOO HIGH FOR VACUUM 38 Internal scale is out of calibration Refrigerant is stalled in the ISV or the machine Machine is not shipped with database installed Overfill safety circuit tripped Machine is locked out because of too much refrigerant in ISV 150 kg 331 Ibs or more refrigerant has been recovered since last filter change Machine is locked out because pressure in ISV is too high possibly because of excessively high tank temperature Refrigerant tested is not R134a or
57. ment or the Software and you agree that any litigation will be subject to the exclusive jurisdiction of the state or federal courts in Texas USA You agree that regardless of any statute or law to the contrary any claim or cause of action arising out of or related to this Agreement or the Software must be filed within one 1 year after such claim or cause of action arose or be forever barred PRODUCT LABELING You are not authorized to use any Freescale trademarks brand names or logos ENTIRE AGREEMENT This Agreement constitutes the entire agreement between you and Freescale regarding the subject matter of this Agreement and supersedes all prior communications negotiations understandings agreements or representations either written or oral if any This Agreement may only be amended in written form executed by you and Freescale SEVERABILITY If any provision of this Agreement is held for any reason to be invalid or unenforceable then the remaining provisions of this Agreement will be unimpaired and unless a modification or replace ment of the invalid or unenforceable provision is further held to deprive you or Freescale of a material benefit in which case the Agreement will immediately terminate the invalid or unenforceable provision will be replaced with a provision that is valid and enforceable and that comes closest to the intention underlying the invalid or unenforceable provision NO WAIVER The waiver by Freescale of any breach
58. ms and Conditions for licensed third party software components included within IAR Systems software product IAR Embedded Workbench These notices and or additional terms and conditions are made a part of and incorporated by reference into the IAR Software License Agreement 1 Components used internally in IAR Embedded Workbench Third Party Notice Terms Software SCINTILLA IBM ICU License for Scintilla and SciTE Copyright 1998 2002 by Neil Hodgson All Rights Reserved Permission to use copy modify and distribute this software and its documentation for any purpose and without fee is hereby granted provided that the above copyright notice appear in all copies and that both that copyright notice and this permission notice appear in supporting documentation NEIL HODGSON DISCLAIMS ALL WARRANTIES WITHREGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS IN NO EVENT SHALL NEIL HODGSON BELIABLE FOR ANY SPECIAL INDIRECT OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE DATA OR PROFITS WHETHER IN AN ACTION OF CONTRACT NEGLIGENCE OR OTHER TORTIOUS ACTION ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE ICU License ICU 1 8 1 and later COPYRIGHT AND PERMISSION NOTICE Copyright c 1995 2003 International Business Machines Corporation and others All rights reserved Permission is hereby granted free of charge to any person obtaining a copy of t
59. n has been returned to IAR Systems or destroyed The provisions of this Section 13 3 shall survive the cancellation or termination of this Agreement 14 EXPORT CONTROL REGULATIONS 14 1 The Software and the Documentation is subject to export or import regulations in various countries including the regulations of the United States Export Administration Act The Licensee hereby agrees that the Licensee will not knowingly a export or reexport directly or indirectly any product or technical data or any controlled products restricted by applicable national regulations including software received from IAR Systems under this agreement b disclose such technical data for use in or c export or reexport directly or indirectly any direct product of such technical data or of such other controlled products including software to any destination to which such export or reexport is restricted or prohibited by U S or applicable non U S law without obtaining prior written consent of IAR Systems 15 MISCELLANEOUS 15 1 This Agreement shall not in any situation be assignable or transferable in whole or in part by either party without the prior written approval of the other party This notwithstanding IAR Systems shall be entitled to assign this Agreement in whole or in part to a company within the IAR Systems Group and IAR Systems may assign this Agreement without penalty or detriment to its rights under this Agreement and without the Licensee s prior w
60. n to pay license fees are available to the extent separately provided by IAR Systems IAR SOFTWARE LICENSE AGREEMENT 3 OWNERSHIP AND LICENSE GRANT 3 1 IAR Systems holds the copyright trade secrets and any other intellectual property rights which subsist in the Licensed Product and all copies thereof No title or other rights in the Licensed Product other than rights expressly granted herein shall pass to the Licensee THE PRODUCT IS LICENSED NOT SOLD TO THE LICENSEE FOR USE ONLY UNDER THE TERMS OF THIS AGREEMENT THE LICENSEE ACKNOWLEDGES THAT THE PRODUCT CONSISTS OF PROPRIETARY UNPUBLISHED PRODUCTS OF IAR SYSTEMS PROTECTED UNDER INTERNATIONAL COPYRIGHT AND TRADE SECRET LAWS 3 2 PC locked License To the extent the relevant license granted is a PC locked License the terms in 3 2 a and 3 2 b shall apply A PC locked License is a single user license locked to the computer where the software is installed 3 2 a Subject to the terms and conditions of this Agreement IAR Systems hereby grants to the Licensee a personal non transferable and non exclusive PC locked License to use the Software The Licensee s number of authorized users of the Software under the PC locked License if more than one is stated in the Invoice or otherwise in writing from IAR Systems 3 2 b The PC locked License may be used by the Licensee only on one single self contained computer unit stationary or portable designated through its IP number or other mea
61. nce with the applicable license terms or evidence of the contrary 4 3 Subject to the other terms herein and with the Licensee as fully responsible for all actions or omissions of suchaconsultant Licensee may let aconsultant use the Software for work solely on behalf of the Licensee for the licensed purpose and provided that the Software is not used for any other purpose or third party 4 4 Upon each and every breach by the Licensee hereunder a contractual penalty amounting to 200 for breach under sections 3 2 3 3 3 4 3 5 3 6 3 11 4 1 or 4 3 and 1000 for breach under section 3 8 of the applicable licensee fee under the relevant Invoice is payable by the Licensee to IAR Systems In case IAR Systems actual damage due to the breach would exceed this amount also the remainder shall be paid by the Licensee see also Section 3 8 5 CONFIDENTIALITY 5 1 The Licensee agrees that all material and information relating to the Software is made available for the use solely under and in accordance with this Agreement The Licensee has no right at any time during or after cancellation or termination of this Agreement to disclose such material and or information relating to the Software whether directly or indirectly to any third party without IAR Systems prior written approval The Licensee shall hold harmless defend and indemnify IAR Systems from and against any and all losses costs damages and expenses arising out of or in connection with the Lice
62. ns of identification A switch of the designated computer to another single computer may be allowed to transfer the license via a transfer program provided by IAR Systems within the license management system The Software may not be accessed by users from other computer units than the unit designated as set forth in this clause through modem Internet or any other means of network or remote access 3 3 Mobile License To the extent the relevant license granted is a Mobile License the terms in 3 3 a and 3 3 b shall apply A Mobile License comes with a hardware lock dongle A hardware lock is a device to be attached to one of the computer s external ports which allows the Licensee to move the license to another computer A hardware lock is part of the product package only to the extent explicitly ordered 3 3 a Subject to the terms and conditions of this Agreement IAR Systems hereby grants to the Licensee a personal non transferable and non exclusive Mobile License to use the Software The Licensee s number of authorized users of the Software under the Mobile License if more than one is stated in the Invoice or otherwise in writing from IAR Systems 3 3 b The Mobile License may be used by the Licensee only for one single user but with the right to a switch of the designated computer to another single computer using a hardware lock The Software may not be accessed by users from other computer units than the unit designated as set forth in this clau
63. nsee s failure to comply with requirements of this Article 5 The Licensee s confidentiality obligations hereunder shall survive cancellation or termination for any reason of this Agreement 6 PAYMENT TERMS AND CONDITIONS 6 1 In consideration of the rights granted and services rendered by IAR Systems under this Agreement the Licensee shall pay the license fees for the Software as specified in the Invoice Payments are to be made according to the payment schedule stated in the Invoice or if not stated invoices are payable within 30 days of the invoice date 6 2 If the Licensee fails to effect payment within the stipulated time IAR Systems or IAR Distributors shall be entitled to a charge interest after due date as stated in the Invoice or if not stated in the invoice the interest charged will be the reference rate set by Sweden s central bank the Riksbank 896 b postpone the fulfilment of any of its own obligations until payment is made and or c terminate the Agreement by notice in writing to the Licensee and recover from the Licensee any and all loss incurred 6 3 All prices are exclusive of and the Licensee is responsible for all fees and taxes including custom duties importation fees sales use withholding gross revenue and like taxes dues and charges assessed or incurred in connection with the provision of goods and services under this Agreement 7 LIMITED WARRANTY 7 1 IAR Systems warrants that the media on which the Softw
64. nt Parts and Glossary 0000000 ee 37 Troubleshooting Messages 0 00 e eee n eee 38 Storage and Transportation of Equipment 41 Disposal of Equipment 0 0 0 0c cc eee 42 34788 NI 34788NI H Rev B 4 Safety Precautions Explanation of Safety Signal Words Used in this Manual The safety signal word designates the degree or level of hazard seriousness A DANGER Indicates an imminently hazardous situation which if not avoided will result in death or serious injury WARNING Indicates a potentially hazardous situation which if not avoided could result in death or serious injury A CAUTION Indicates a potentially hazardous situation which if not avoided may result in minor or moderate injury CAUTION Used without the safety alert symbol indicates a potentially hazardous situation which if not avoided may result in property damage These safety messages cover situations Robinair is aware of Robinair cannot know evaluate and advise you as to all possible hazards You must verify that conditions and procedures do not jeopardize your personal safety Explanation of Safety Decals Used on the 34788NI 34788NI H Carefully read the instructions v Do not use in open air in case of rain or high hu MN midity Wear gloves Wear protection goggles Alternating voltage Grounding protection Electrical shock hazard P QD 06
65. ntation if any is provided with RESTRICTED RIGHTS Use duplication or disclosure by the Government is subject to restrictions as set forth in subparagraph c 1 ii of The Rights in Technical Data and Computer Software clause at DFARS 252 227 7013 or subparagraphs c l and 2 of the Commercial Computer Software Restricted Rights at 48 CFR 52 227 19 as applicable Manufacturer is Freescale Semiconductor Inc 6501 William Cannon Drive West Austin TX 78735 HIGH RISK ACTIVITIES You acknowledge that the Software is not fault tolerant and is not designed manufactured or intended by Freescale for incorporation into products intended for use or resale in on line control equipment in hazardous dangerous to life or potentially life threatening environments requiring fail safe performance such as in the operation of nuclear facilities aircraft navigation or communication systems air traffic control direct life support machines or weapons systems in which the failure of products could lead directly to death personal injury or severe physical or environmental damage High Risk Activities You specifically represent and warrant that you will not use the Software or any derivative work of the Software for High Risk Activities CHOICE OF LAW VENUE LIMITATIONS You agree that the statutes and laws of the United States and the State of Texas USA without regard to conflicts of laws principles will apply to all matters relating to this Agree
66. of disposal The user must ensure compliance with all applicable laws and regulations 1 Deliver the refrigerant recovered from A C systems to gas suppliers for recycling or disposal 2 Deliver the lubricants extracted from A C systems to used oil collection centers 3 Review the laws in your jurisdiction to determine correct disposal procedures for pump oil Disposal of the Machine 1 Detach and vent the gas from the machine circuit Completely discharge the refrigerant tank in compliance with current government regulations 2 Deliver the machine to an appropriate disposal center Disposal of Batteries L At the end of their useful life dispose of batteries according to current government regulations Batteries must be recycled or disposed of correctly Do not throw K away batteries as part of normal refuse disposal A To prevent personal injury do not throw batteries into open flame 42 BOSCH AUTOMOTIVE SERVICE SOLUTIONS SOFTWARE LICENSE NOTICES BOSCH AUTOMOTIVE SERVICE SOLUTIONS SOFTWARE LICENSE NOTICES Copyright 2014 Robert Bosch GmbH All Rights Reserved Bosch Automotive Service Solutions 28635 Mound Road Warren MI 48092 USA Phone numbers USA 800 533 6127 EMEA 49 0 6182 959 225 This Bosch Automotive Service Solutions software is released under the software license agreement presented at product activation All other products or service names are the property of their respective owners R
67. of any provision of this Agreement will not operate or be construed as a waiver of any other or a subsequent breach of the same or a different provision February 2013 Rev 5 573104 Rev B February 10 2015 655 Eisenhower Drive Owatonna MN 55060 USA Technical Services 1 800 822 5561 Fax 1 866 259 1241 Customer Service 1 800 533 6127 Fax 1 800 322 2890 www robinair com Bosch Automotive Service Solutions Inc
68. of refrigerant to ensure enough is available for charging Connect the tank fill black hose to the liquid connector on the source tank Open the source tank valve Position the source tank in such a way that liquid refrigerant is supplied to the connection Press the key to start the tank fill process The machine begins filling the internal storage vessel ISV Add at least 3 6 kg of refrigerant to ensure enough is available for charging This process takes 15 20 minutes The machine stops when the designated amount of refrigerant has been transferred to the ISV or when the source tank is empty Follow the messages on the display screen Close the source tank valve Press the Y key to return to the Setup Menu The machine is ready for operation Note There is no need to calibrate the scale it is calibrated at the factory e After the tank fill process is complete the display does not show the same amount as the programmed fill level The display shows the amount of refrigerant that is available for charging which is approximately 1 27 kg less than the total amount of refrigerant in the tank 14 Initial Setup Unit Activation Failure to register and activate the machine within 30 days of initial startup will cause the machine to lock out and no longer function 1 Select Unit Activation from the Setup Menu The machine displays XX DAYS LEFT ON TRIAL PERIOD TO ACTIVATE UNIT ACTIVAT
69. om an SD card or updated 1 Choose SELECT LANGUAGE from the Setup language Menu 2 Use the arrow keys to scroll to LOAD NEW Press the Y key 3 Insert the SD card containing the language data into the side panel on the machine See Figure 7 4 Follow the prompts to select the language to Figure 7 load or update If loading a new language it will be necessary to select which language to replace 34788 NI 34788NI H Rev B 27 Maintenance Adjust Background Fill Target This machine possesses a background tank fill feature An external refrigerant storage vessel can be fluidly connected to the machine using the black tank fill hose for a continuous topping off of the internal storage vessel Drawing from the refrigerant within the connected external staorage vessel the machine will periodically charge the ISV tank to the desired fill target 1 To choose the background refrigerant fill target of the machine find Adjust Background Fill Target in the SETUP MENU 2 Using the arrows and the numeric keypad enter the desired fill target Press the v key to save the new value and exit Press the X key to exit and continue to use the previously entered amount Tank Fill This menu item is used to transfer refrigerant from a source tank to the ISV The maximum capacity of the internal storage vessel ISV is 10 kg Use the arrow keys to move the cursor use the keypad to enter a value Note Add at least 3 6 kg of
70. opyright notice this list of conditions and the following disclaimer Redistributions in binary form must reproduce the above copyright notice this list of conditions and the following disclaimer in the documentation and or other materials provided with the distribution Neither the name of Google Inc nor the names of its contributors may be used to endorse or promote products derived Protocol from this software without specific prior written permission Buffers THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS AS IS AND ANY EXPRESS OR IMPLIED WARRANTIES INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLEFORANY DIRECT INDIRECT INCIDENTAL SPECIAL EXEMPLARY OR CONSEQUENTIAL DAMAGES INCLUDING BUT NOTLIMITED TO PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES LOSS OF USE DATA OR PROFITS OR BUSINESS INTERRUPTION HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY WHETHER IN CONTRACT STRICT LIABILITY OR TORT INCLUDING NEGLIGENCE OR OTHERWISE ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE Boost C Libraries 2 Components potentially used in customer applications Third Party Notice Terms Software Version of malloc free realloc aka dlmalloc written by Doug Lea and released to the public domain as explained at h
71. ore information Introduction The Robinair No 34788NI 34788NI H machine is used on R134a equipped vehicles and is designed to be compatible with existing service equipment and standard service procedures This machine is a single pass system i e refrigerant flows through a filter once that meets specifications for recycled refrigerant Follow recommended service procedures for the containment of R134a Note Refrigerant systems require special oils Refer to the A C system manufacturer s service manual for oil specifications Technical Specifications Compressor ie as oa od bees Pe RRS ER E 1 3 HP Dimensions 107 cm x 61 cm x 76 cm Display i i 3 94 x 6 34 cm graphical LCD Filter eee ee ee EL tur VERI TS 68 kg 150 Ibs Humidity 32 2 C 90 F 80 RH non condensing Manometer 0 100 mm 3 9 in Maximum Pressure 27 bar 390 PSI NOISE oiseau nU Misura tut eer 70 dB A Nominal Voltage 115V 60 Hz Oil Tank itus en Reba et EPIRI AH 355 ml Operating Temperature 10 C 10 50 C Power Consumption 1380 VA Pump Free Air Displacement 1 5 CFM 35 m 50 Hz Service Hoses 250 cm SAE J2196 Tank Capacity pa AERE 10 kg 22 Ibs Weight 45 eae xo e UR a 080 ele di OR SCC n e 73 kg 34788 NI 34788NI H Rev B 34788NI shown Introduction Features of the 34788NI 34788NI H e TN 1
72. orrect voltage grounded outlet 2 Position the machine so the plug and the power switch are of easy access for the operator Verify the fan vents on the rear of the machine are not obstructed 3 Lock the front wheels 4 Toggle the power switch on the control panel to turn the machine ON The machine launches into the initial Setup mode 34788 NI 34788NI H Rev B 4 4 Initial Setup Select Language The operator selects the language for the screen Note To update an existing language prompt displays English is the default language or to add a new language refer to Load 1 Use the UP or DOWN arrow key to toggle Language in the Maintenance section of through the available languages one line ata this manual time 2 Press the Y key to set the selected language Select Units The operator sets the display for units of measure Metric is the default 1 Use the UP or DOWN arrow key to toggle Imperial or Metric units 2 Press the Y key to choose the displayed unit of measure Set Date and Time Use the arrow keys to move the cursor Use the keypad to modify the information displayed 1 Use the UP and DOWN arrow keys to select which item to change day month year or time Press 1 0 to toggle between AM and PM 2 Use the multi tap interface on the numeric keypad to modify the information 3 Press the Y key to save Edit Print Header This machine has the capability to store recovery vacuum charge
73. r Problems resulting from the use of non approved oils will cancel the warranty 34 Maintenance Edit Print Header To make changes to text that appears in this screen 1 In the Setup Menu select Edit Print Header 2 The cursor is in the first field Update the text by using the arrows and the multi tap interface on the numeric keypad e arrow acts as a backspace key RIGHT arrow moves the cursor to the right e ZERO 0 key acts as a spacebar e UP and DOWN arrows navigate between the rows 3 Press the Y key to save the changes and return to the Setup Menu press the X key to return to the previous header and exit to the Setup Menu Leading Edge Replace Printer Paper Units with of Paper Over Printers Roller To install a new paper roll in the printer 1 Remove the cover on the printer by pulling out on the tab as shown in Figure 12 2 Remove the paper core 3 Install the new roll of paper with the end of the paper at the top of the roll 4 Assemble the cover onto the printer with the leading edge of the paper over the roller Tab Figure 12 34788 NI 34788NI H Rev B 35 Maintenance Install a Printer A printer may be purchased and installed on any model not containing a printer All models of the machine already contain a printer connection harness that is ready for use To install a printer 1 Turn OFF the machine and disconnect it from its power source 2 Remove
74. rdware lock allows to move the Global Network License to another server computer in case of server failure The Global Network License can be used on all client computers on the network where the Software is installed However the Global Network License is made for a maximum number of concurrent users 3 7 Concurrent Users For Products that are Executable Software and licensed as Network Licenses the definition of concurrency is given by the license server software which also keeps track of the number of current of users A user session of an Executable Software is always a minimum of thirty 30 minutes and is deemed to last for additional thirty 30 minutes after the last license activation by the license server For Products including Software Source Code the software shall be deemed in concurrent use on a computer when it is loaded into temporary memory i e RAM or installed into permanent memory e g hard disk CD ROM or other storage device of that computer 3 8 Commuter licensing For Products released 2012 and later including a new license management system February 2013 Rev 5 IAR SOFTWARE LICENSE AGREEMENT LMS a commuter license is granted Commuter licensing permits a temporary use of a network license on a personal computer not connected to the network for up to 15 days The commuter license permits the use of the Product outside the designated Site 3 9 Source Code License If the Product Licensee receives hereunder con
75. ritten consent in the event of a merger or similar reorganization or sale of substantially all of IAR Systems assets 15 2 No alteration or amendment to this Agreement shall be valid unless such alteration or amendment is made in writing and signed by the parties hereto 15 3 Any notice or other communication under this Agreement shall be made in writing either by hand or by telefax confirmed by airmail or by certified or registered airmail first class postage prepaid to the parties at the addresses stated in the Invoice or at such other address a party may specify by written notice to the other 15 4 This Agreement contains the entire understanding between the parties on its subject matter and annuls and replaces any other agreements or understandings whether written or oral which may exist or have existed between the parties on the subject matter hereof 15 5 This Agreement shall be governed by and construed in accordance with the substantive to the courts of the country in which IAR Systems is incorporated Any dispute concerning this agreement or the interpretation or validity thereof or any other dispute based thereon shall be submitted to the courts of the country in which IAR Systems is incorporated February 2013 Rev 5 IAR SOFTWARE LICENSE AGREEMENT 15 6 The provisions of this Article 15 shall survive the cancellation or termination of this Agreement This document contains Third Party Software Notices and or Additional Ter
76. s has the meaning as set out in section 3 7 1 13 Commuter license has the meaning as set out in section 3 8 1 14 Evaluation License has the meanings set out in section 3 12 1 15 Site means the physical premises of the Licensee within the borders of one city 1 16 Target Architecture means the family or group of embedded micro controller and micro processor devices belonging to one processor architecture as defined by its instruction set and as specified on the Invoice 1 17 Support and Update Services means the services set out in section 12 2 TERM OF AGREEMENT 2 1 This Agreement shall become effective on the latest at the Licensee s receipt of the Software and shall remain in effect for an indefinite period in time subject to the terms and conditions set out below in particular the right of IAR Systems to terminate the Agreement upon Licensee s breach Registration of the Licensee as a rightful user of Licensed Products shall be made in accordance with applicable instructions from IAR Systems 2 2 For the avoidance of doubt Also for Software delivered with a temporary license key for some products called quick start key enabling use for a limited time the Agreement terms have become effective including but not limited to its payment terms and use restrictions already upon the Licensee sreceipt of the Software regardless of whether registration is made or not Evaluation licenses without obligatio
77. s been reached and will no longer function Check Remaining Filter Capacity 1 Select FILTER MAINTENANCE from the Setup Caution To prevent equipment Menu or when the machine prompts The i en damage use only authentic Robinair machine displays No 34724 filters in this machine All REMAINING FILTER CAPACITY performance tests and claims are XXX XO KG based on using this specific filter REPLACE FILTER NOW The machine displays the amount of filter capacity remaining until the machine locks down 2 Press the Y key to change the filter press the X key to resume using the machine A WARNING The components in the machine are under high pressure To prevent personal injury change the filter only when the machine prompts Replace the Filter 1 If the Y key was selected to change the filter the machine prompts for the new filter code to be entered ENTER NEW FILTER SERIAL NUMBER Use the keypad to enter the serial number that appears on the new filter and press v to continue Note If INVALID SERIAL NUMBER is displayed the serial number has been incorrectly entered or the filter has already been used in this machine 34788 NI 34788NI H Rev B 29 Maintenance Filter Maintenance continued 2 The machine clears the existing filter and then displays Remove the four screws holding the shroud SERIAL NUMBER ACCEPTED TURN POWER OFF AND REPLACE FILTER Shut off the m
78. se through modem Internet or any other means of network or remote access 3 4 Multi user License To the extent the Product license granted is a Multi user License the terms in this 3 4 shall apply Subject to the terms and conditions of this Agreement IAR Systems hereby grants to the Licensee a personal non transferable and non exclusive Multi user License to use the Software The Licensee s number of authorized users of the Software under the Multi user License if more than one is stated in the Invoice or otherwise in writing from IAR Systems or IAR Distributors 3 5 A Network License is a Multi user License located on a single designated license server and used by multiple users on a network and on one Site only The Network License is locked either to the computer where the license server software runs or to a hardware lock dongle The use of a hardware lock allows to move the Network License to another server computer in case of server failure The Network License can be used on all client computers on the network where the Software is installed However the Network License is made for a maximum number of concurrent users 3 6 A Global Network License is a Multi user License located on a license server and used by multiple users on a network that can be accessed from multiple Sites globally The Global Network License is locked either to the computer where the license server software runs or to a hardware lock dongle The use of a ha
79. ses the vacuum test a controlled pressure is applied to its internal components The machine displays PRESSURE LEAK CHECK IN PROGRESS Pressure is held for five minutes and monitored for decay Minutes and seconds count down on the display If an acceptable pressure decay is detected the machine recovers refrigerant and returns to the Setup Menu ready for normal operation If an unacceptable pressure decay is detected the machine will prompt to check for leaks Take the machine to an authorized Robinair service center for repair A warnine To prevent personal injury should the machine require transport to a local Robinair service center follow local government regulations regarding transportation of equipment containing R134a 34788 NI 34788NI H Rev B 33 Maintenance Select Oil Viscosity 34788NI model The oil inject functionality in this machine is automatic and timing based The viscosity of the oil being injected significantly affects the accuracy 1 To choose the viscosity of the oil being used find Select Oil Viscosity in the SETUP MENU 2 Using the arrow keys highlight your desired PAG oil viscosity 46 100 125 or 150 Once highlighted press the key to accept your choice 3 The unit is now ready to accurately inject your chosen oil CAUTION To avoid chemical incompatibilities with the internal components of the machine use only oils approved by the vehicle manufacture
80. ss Install the cap on the oil fill port and close tightly Press the gt gt key to return to the Pump Maintenance screen 32 Ad caution To prevent personal injury do NOT operate the machine at any other time without the oil fill port cap installed because the vacuum pump is pressurized during normal operation Oil Fill Cap and d Port D O Sight 2 Glass Oil Drain Fitting L Figure 11 Caution It is the responsibility of the user to monitor vacuum pump oil level and clarity If contaminated oil is not removed from the vacuum pump and replaced the vacuum pump will be permanently damaged Maintenance Leak Check A leak test may be performed on the machine at any time During this test components containing refrigerant are pressurized and monitored for pressure decay which could indicate a leak 1 Select LEAK CHECK from the Setup Menu The machine displays CONNECT SERVICE HOSES TO STORAGE PORTS AND OPEN COUPLER VALVES Connect the service hose couplers to the storage ports at the rear of the machine Open the couplers by turning the collars clockwise Press the Y key to start The machine performs a self recovery and displays RECOVER IN PROGRESS The machine performs a 30 second vacuum test and displays VACUUM LEAK CHECK IN PROGRESS If the vacuum test fails the machine will prompt to check for leaks Once the machine pas
81. tained software modules or components in source code format Software Source Code the following shall apply to such Software Source Code in addition to all other provisions of this Agreement The Licensee may use such Software Source Code only in conjunction with the Product and the Software Source Code or any derivative works thereof The Software Source Code may only be compiled and linked with products from IAR Systems and only in accordance with the provisions on such use set out in the Documentation and or this Agreement The Licensee is strictly prohibited to make any other use of the Software Source Code Any breach of this Section 3 9 shall be considered a material breach of this Agreement THE LICENSEE ACKNOWLEDGES THAT THE SOFTWARE SOURCE CODE EMBEDS COPYRIGHTED AND PROPRIETY INFORMATION OF IAR SYSTEMS AND THAT MAKING SOFTWARE SOURCE CODE ACCESSIBLE TO OTHERS OUTSIDE THE SCOPE OF THIS AGREEMENT BY THE NATURE OF SOURCE CODE SEVERELY DAMAGES THE INTELLECTUAL PROPERTY RIGHTS OF IAR SYSTEMS AND AGREES TO COMPENSATE IAR FOR ALL DAMAGE RESULTING FROM SUCH BREACH THAT CAN BE REASONABLY SUBSTANTIATED BY IAR The Licensee shall keep and protect the Software Source Code with at least the same degree of care as its own proprietary source code as further specified in section 5 3 10 If the Product the Licensee receives hereunder contains Third Party Owned software the use of such Third Party Owned software may be restricted to a specific Target
82. the four screws holding the shroud See Figure 8 3 Hang the shroud on the back of the machine as shown in Figure 9 4 Remove the two screws on the top corners of the control panel allowing the control panel to swivel forward 5 The printer connection harness is fastened to the back of the cap that is in the printer location cut out Remove the zip tie freeing the harness The harness will be used in a later step 6 Remove the cap from the printer location cut out by pressing on the cap s tabs from the back of the control panel and pushing the cap out of the panel 7 Remove the two locking arms from the printer by inserting the face of a flathead screwdriver under each tab near the back of its locking arm Pry the tab outward while sliding the entire arm away from the printer 8 Place the printer into the cut out area on the control panel Press the face of the printer flush to the panel oriented with the paper coming out at the top of the printer as shown in Figure 12 9 Replace the printer locking arms from within the inside of the control panel Push them forward until they come into firm contact with the inside face of the control panel 10 Locate the free end of printer connection harness which was detached from the cap in Step 5 11 Attach the two free connectors to the appropriate connectors on the back of the printer 36 12 Swivel the control panel back into place and fasten it
83. thin the accumulator to force the oil which has been separated from the refrigerant out of the system Press F1 to retry press F2 to exit Refer to Filter Maintenance section of this manual for instructions to change vacuum pump oil 39 Troubleshooting Messages Display Case Solution O OUT OF RANGE ACCUMULATOR PRESSURE OUT OF RANGE HS PRESSURE OUT OF RANGE ISV PRESSURE OUT OF RANGE ISV TEMPERATURE OUT OF RANGE LOW SIDE PRESSURE PRESSURE TEST FAILED CHECK FOR LEAKS SERIAL NUMBER HAS ALREADY BEEN USED SOURCE TANK IS EMPTY TANK FULL REMOVE REFRIGERANT BEFORE CONTINUING TRIAL PERIOD EXPIRED UNIT ACTIVATION REQUIRED TO CONTINUE USE VACUUM TEST FAILED CHECK FOR LEAKS 40 Accumulator pressure transducer is not reading pressure correctly High side pressure transducer is not reading pressure correctly Internal storage vessel pressure transducer is not reading pressure correctly Internal storage vessel temperature sensor is not reading temperature correctly Low side pressure transducer is not reading pressure correctly A leak in vehicle A C system Filter serial number entered into the machine is not correct Refrigerant cannot be transferred to the ISV because the source tank is empty ISV is too full to recover additional refrigerant Failure to register and activate the machine within 30 days of initial startup will cause the machine to lock out and
84. tional treaty provisions protect the Software Therefore you must treat the Software like any other copyrighted material e g a book or musical recording You may not use or copy the Software for any other purpose than what is described in this Agreement Except as expressly provided herein Freescale does not grant to you any express or implied rights under any Freescale or third party patents copyrights trademarks or trade secrets Additionally you must reproduce and apply any copyright or other proprietary rights notices included on or embedded in the Software to any copies or derivative works made thereof in whole or in part if any SUPPORT Freescale is NOT obligated to provide any support upgrades or new releases of the Software If you wish you may contact Freescale and report problems and provide suggestions regarding the Software Freescale has no obligation whatsoever to respond in any way to such a problem report or suggestion Freescale may make changes to the Software at any time without any obligation to notify or provide updated versions of the Software to you NO WARRANTY TO THE MAXIMUM EXTENT PERMITTED BY LAW FREESCALE EXPRESSLY DISCLAIMS ANY WARRANTY FOR THE SOFTWARE THE SOFTWARE IS PROVIDED AS IS WITHOUT WARRANTY OF ANY KIND EITHER EXPRESS OR IMPLIED INCLUDING WITHOUT LIMITATION THE IMPLIED WARRANTIES OF MERCHANTABILITY FITNESS FOR A PARTICULAR PURPOSE OR NON INFRINGEMENT YOU ASSUME THE ENTIRE RISK ARISING OUT OF
85. ttp creativecommons org publicdomain zero 1 0 IAR SOFTWARE LICENSE AGREEMENT Dinkum Abridged C Library Sub license Definition The term Licensed Source shall mean the Dinkum Abridged Library source code the Dinkum C Library source code and the Dinkum Abridged Library Reference or a later version of the same products A Sub license is granted solely in conjunction with and for use with IAR C EC C Cross Compiler owned by IAR Systems AB The Sub Licensee shall supply to Dinkumware Ltd Licensor with the following protections a Plauger s ownership a Sub Licensee acknowledges and agrees that Title and all rights of ownership to the Licensed Source and all copies of all or any part thereof are and remain with Plauger Sub Licensee shall not lend sell lease hypothecate or oth erwise dispose of the Licensed Source All copies of the Licensed Source or any part thereof in any form whatsoever including but not limited to forms cognizable to the human eye directly or upon enlargement or translation or to data processing or other equipment shall be the sole and exclusive property of Plauger as described immediately above and Licensor has represented that the Licensed Source may contain Licensor s trade secrets and proprietary information whether or not any portion thereof is or may be copyrighted or patented b Sub Licensee agrees to preserve unchanged all copyright notices in all copies of the Licensed Source c L
86. u will be returned to the Main Menu The vehicle A C system is now ready for use 34788 NI 34788NI H Rev B a WARNING To prevent personal injury while working with refrigerant read and follow the iu instructions and warnings in this manual and wear protective equipment such as goggles and NE gloves Note The charging process differs from vehicle to vehicle Charge function for vehicles equipped with a single service fitting should be carried out manually Refer to the vehicle service manual for specific instructions CAUTION If the low side blue or high side red coupler valve is left open and connected during the hose clearing process the system will pull refrigerant back out of the vehicle 21 Operating Instructions Charge N de eis Recharge the Vehicle A C System 34788NI H model 1 While within the Main Menu press the CHARGE em key The display shows Is the service being performed on a system with an electric compressor using POE oil 2 If the system does not have an electric compressor with POE oil press the X key to continue If the system has an electric compressor with POE oil press the v key to flush all residual oil from the hoses You will be prompted to Connect service hoses to storage ports and open couple valves See Figure 1 Continuing will begin the process of flushing the hoses Once complete press the key to continue through the
87. vacuum pump performance change vacuum pump oil every time the filter is replaced Refer to the Change Vacuum Pump Oil in the Maintenance section Refrigerant Management Displays the amount of refrigerant recovered charged and replenished for the life of the machine and filtered since the last filter change Select Language Select a language for screen prompts English is the default language Service Menu For Robinair service center use only 10 Select Units Program the machine to display units of measure in kilograms or pounds The default display is kilograms Date and Time Program the machine for current date and time System Flush Provides a method of removing oil by forcing liquid refrigerant through an A C system or components of an A C system After flushing the refrigerant is recovered by the machine and filtered by the recycling circuit System Information Displays the revision level of the software in the machine Tank Fill Use this Setup Menu item to transfer refrigerant from a source tank to the ISV The tank fill value may be adjusted up or down to suit the user s needs Refer to Tank Fill in the Maintenance section Unit Activation Failure to register and activate the machine within 30 days of initial startup will cause the machine to lock out and no longer function Select this Setup Menu item and follow the prompts before the trial period expires View Service Data Displ
88. y port thereof or any modification or improvement of the Licensed Source or any object code which is derived from the Licensed Source c Sub Licensee agrees to comply with all applicable laws regulations rulings and executive order from the United States relating to the export or re export of the Licensed Source and with all applicable foreign laws which must be complied with in order to protect or preserve Licensor s copyright s trade secret s and other proprietary rights in and to the Licensed Source Sub Licensee agrees that it will not knowingly ship or divert the Licensed Source for use in any country which has ratified neither the Berne Copy right Convention nor the Universal Copyright Convention without first obtaining written permission from Licensor c Warranty and Disclaimer of Warranty a Licensor warrants that at the time of delivery the Licensed Source will be in good operating condition and will be Standard Conforming in all essential respects b Licensor represents and warrants that it is not aware that the Licensed Source is created in whole or in part by violation of the protected trade secret of another or that the Licensed Source infringes any U S patent or copyright c THE FOREGOING LIMITED WARRANTIES ARE THE ONLY WARRANTIES OF LICENSOR TO SUB LICENSEE AND ARE IN LIEU OF ALL OTHER WARRANTIES EXPRESS OR IM PLIED INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OF MERCHANT ABILITY AND FITNESS FOR A PARTICULAR PURPOSE

Models: 34788NI, 34788NI-H

Contents

Download Pdf Manuals

Related Search

Related Contents