Instructions - Workshopping.co.uk
Contents
1. Siblil Auto Service Line INSTRUCTION MANUAL FOR RELAY CIRCUIT DIAGNOSTIC TESTER MODEL No TA130 Your new tester is produced and manufactured to a high standard of dependability and will if used according to these instructions and properly maintained give you years of trouble free performance THIS TESTER CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED FAILURE TO DO SO MAY CAUSE DAMAGE IMPORTANT READ THESE INSTRUCTIONS CAREFULLY NOTE THE SAFE OPERATIONAL REQUIREMENTS WARNINGS AND CAUTIONS USE AND OR PERSONAL INJURY AND WILL INVALIDATE THE WARRANTY RETAIN THESE INSTRUCTIONS FOR FUTURE USE 1 SAFETY PRECAUTIONS IF YOU ARE IN ANY DOUBT ABOUT ELECTRICAL SAFETY CONSULT A QUALIFIED ELECTRICIAN Only for use with 12V 24V DC systems DO NOT use with industrial 110V systems DO NOT use for domestic 110V 230V applications DO NOT use on any circuit directly or indirectly connected to AC lines or any other AC power source Always check the instructions and procedures indicated in the vehicle service manual before attempting to disconnect any part or sub system of the electrical circuit DO NOT use if leads are damaged or if any wires are bared in any way DO NOT use the equipment when you are tired or under the influence of alcohol drugs or intoxicating medicines DO NOT use this tool for any purpose other than that for which it has been designed Observe standard workshop safety p2. arts list and diagram please log on to www sealey co uk email sales sealey co uk or phone 01284 757500 Environmental Protection Eo Recycle unwanted materials instead of disposing of them as waste All tools accessories and packaging should be sorted taken to a recycle centre and disposed of in a manner which is compatible with the environment Dz When the product is no longer required it must be disposed of in an environmentally protective way C NOTE It is our policy to continually improve products and as such we reserve the right to alter data specifications and component parts without prior notice IMPORTANT No liability is accepted for incorrect use of this product WARRANTY Guarantee is 12 months from purchase date proof of which will be required for any claim INFORMATION For a copy of our latest catalogue and promotions call us on 01284 757525 and leave your full name and address including postcode hk V Professional Sole UK Distributor Sealey Group E SALME TOOLS Kempson Way Suffolk Business Park Em 01284 757500 Can www sealey co uk Bury St Edmunds Suffolk A Auto Service Line P32 7AR 01284 703534 xa sales sealey co uk Original Language Version _TA130 Issue 1 16 04 12
3. een LED illuminated when testing a circuit Both LEDs should not be illuminated at the same time for an individual circuit as this will indicate a fault within that circuit Typically circuits 86 and 30 will illuminate red whilst circuit 85 will illuminate green 3 2 3 If the relay circuits are serviceable as indicated by the LEDs they can be energised by pressing the test button 87 and 87A for a five pin relay For example if the horn relay circuit is under test depressing the test button will sound the horn 3 3 Additional Testing 3 3 1 Additional diagnostic tests may be conducted using a Digital Automotive Analyser or test light in conjunction with the test terminals Note There is no resistance in the tester between the test terminals and the vehicle circuit 3 4 Universal Fly Lead 3 4 1 The coloured wires on the universal fly lead have numbered tags to identify which pin the coloured wires correspond to 3 4 2 Should the numbered tags become lost or illegible the guide overleaf indicates which coloured wire corresponds to which particular pin Original Language Version _TA130 Issue 1 16 04 12 fig 1 1g DUMMY RELAYS TEST TERMINALS BUTTONS PLUG RED CLIP O A Universal Fly Lead Pin Identification Guide Wire Colour Pin Number Black 30 White 86 Blue 85 Green 87 Red 87A Parts support is available for this product To obtain a p
4. ng the relay in the on off positions using the test button SSS S O amp K X X SO XXXS O OS q x 3 OPERATING INSTRUCTIONS Note Please refer to fig 1 overleaf for identification of the tester s components 0 WARNING Before use ensure that you have read understood and apply Section 1 safety precautions 1 WARNING All pin numbers on the dummy relays must correspond with the appropriate pin numbers on the vehicle or damage may result when using the test buttons This is especially important when using the universal fly lead 3 1 Connection 3 1 1 Connect the red clip on the tester to the positive terminal on the vehicle battery 3 1 2 Connect the black clip on the tester to the negative terminal on the vehicle battery 3 1 3 All the LEDs on the tester will illuminate indicating that there is no voltage or earth present at the test plug 3 1 4 Remove the relay from the circuit to be tested and install the correct type of dummy relay into the relay socket There are six different types of dummy relay supplied with the kit plus a universal fly lead for use with any type of vehicle relay socket 3 1 5 Attach the test plug to the dummy relay 3 2 Testing 3 2 1 Any circuits that have a voltage will be indicated by the red LED illuminating 3 2 2 Any circuits going to earth will be indicated by the green LED illuminating Note With any relay circuits there should be a minimum of at least one red and one gr
5. rocedures when using the tester Ensure vehicle ignition is switched OFF before connecting or disconnecting the tester Keep the work area clean uncluttered and ensure there is adequate lighting Keep tools and other items away from the engine and ensure you can see the battery and working parts of engine clearly Maintain correct balance and footing Ensure the floor is not slippery and wear non slip shoes Remove ill fitting clothing Remove ties watches rings and other loose jewellery Contain or tie back long hair V Keep children and unauthorised persons away from the working area X DO NOT disassemble The tester must be checked by qualified service personnel only X DO NOT get the tester wet or use in damp or wet locations or areas where there is condensation X DO NOT use the tester for any purpose other than that for which it is designed DO NOT pull by the cables to free from the relay socket When not in use store carefully in a safe dry childproof location Avoid extremes of temperature 2 INTRODUCTION 2 1 Introduction Fast accurate and safe relay circuit tester that tests the supply earth and trigger wires within the circuit Simply remove the relay and install the corresponding dummy relay Includes a universal fly lead for non standard relay pin configurations Earth supply and trigger terminals will be displayed as a green or red LED The tester can also be used to power components by simulati
Download Pdf Manuals
Related Search