Initial D 3 Kit Manual
Contents
1. SOUND VOLUME SWITCH Adjusts sound volume for all of the machines Speakers SPEAKER TEST BUTTON For the handling of the test button refer to the following pages TEST SERVICE BUTTON Gives credits without registering on the coin meter SERVICE DEMAGNETIZER SWITCH Eliminates the on screen color unevenness due to magnetization of DEMAG CRT First use this SW before performing the monitor s color ad justment COIN METER Open the Cashbox Door by using the key to have the Coin Meter appear COIN METER underneath the Cashbox o 5 wea FIG 10 1 b www seuservice com 22 10 2 SYSTEM TEST MODE ror The contents of settings changed in the TEST mode are stored when the test mode is finished from EXIT in the menu mode If the power is turned off IMPORTANT before the TEST mode is finished the contents of setting change become inef fective Executing BACKUP DATA CLEAR in the SYSTEM TEST MODE does not clear the BOOKKEEPING data in the GAME TEST mode Entering the TEST mode clears fractional number of coins less than one credit and BONUS ADDER data Perform setting as per specified in this manual for operation If setting not specified is performed for operation proper function of this product may not be obtained In the SYSTEM TEST MODE IC BD functioning can be checked the monitor adjusted and the coin setting performed Refer to NAOMI NETW2. zz OL CHANGE VIEW START BRAKE ACCEL Press the SERVICE and TEST Buttons simultaneously to return to the Game Test Menu screen 25 www seuservice com C OUTPUT TEST Select OUTPUT TEST to display the following screen and check the status of each lamp This test should be used periodically to check that the lamps are functioning correctly GAME TEST MODE OUTPUT TEST gt START BUTTON CHANGE VIEW BUTTON PRESS TEST BUTTON TO EXIT FIG 10 3 c OUTPUT TEST Screen The cursor toggles automatically between START Button and CHANGE VIEW Button and each lamp lights up Move the cursor to EXIT and press the TEST Button to return to the Game Test Menu screen www seuservice com 26 D FORCE FEEDBACK A CAUTION If you select FORCE FEEDBACK the STEERING will rotate automatically when you press the TEST Button The STEERING will also rotate automatically during FORCE TEST Make sure that no one is touching the STEERING before running these tests as contact may cause injury When you select FORCE FEEDBACK a connection test runs and the STEERING rotates When the connection check completes a screen similar to the one below is displayed and you may adjust the STEERING resistance GAME TEST MODE FORCE FEEDBACK MIN 0 MAX 10 DEFAULT 4 FORCE XX UP DOWN FORCE TEST FORCE 4 CENTER OFF RIGHT OFF LEFT OFF gt EXIT SELECT WITH SERVICE BUTTON AND PRESS TEST BUTTON FIG 10 3 d FORC
3. MIN 40 MAX 40 DEFAULT 0 when you press the ACCEL pedal down all Ss a the way the 0 on the right is aligns with the A mark above MAX Move the cursor to RIGHT and press the MIN TEST Button to move 0 to the right Each RIGHT press of the TEST Button moves 0 slightly LEFT to the right Move the cursor to LEFT and press the TEST Button to move 0 to the left Each press of the TEST Button moves 0 slightly to the SELECT WITH SERVICE BUTTON left AND PRESS TEST BUTTON ACCEL ASSIGNMENT 0 A gt EXIT Move the cursor to EXIT and press the FIG 10 3 ec ACCEL ASSIGNMENTS Screen TEST Button to return to the INPUT ASSIGNMENTS screen BRAKE Make adjustments to BRAKE Press the TEST Button to display the following screen Adjust the distance between 0 displayed GAME TEST MODE and the mark equally so that when your foot is off the BRAKE pedal the 0 on the PE eee left is aligns with the above MIN and MIN 40 MAX 40 DEFAULT 0 when you press the BRAKE pedal down all BRAKE XXX the way the 0 on the right is aligns with the 0 A mark above MAX A Move the cursor to RIGHT and press the MIN TEST Button to move 0 to the right Each press of the TEST Button moves 0 slightly LEFT to the right Move the cursor to LEFT and press the TEST Button to move 0 to the left Each press of the TEST Button moves 0 slightly to the SELECT WITH SERVICE BUTTON left AND PRESS TEST BUTTON
4. gt EXIT Move the cursor to EXIT and press the FIG 10 3 ed BRAKE ASSIGNMENTS Screen TEST Button to return to the INPUT ASSIGNMENTS screen 29 www seuservice com F GAME ASSIGNMENTS Select GAME ASSIGNMENTS to display the current game settings and make changes GAME TEST MODE GAME ASSIGNMENTS GAME DIFFICULTY NORMAL DEFALT VIEW DRIVER SEAT NUMBER NO DEFINED CARD R W ON gt EXIT SELECT WITH SERVICE BUTTON AND PRESS TEST BUTTON FIG 10 3 f GAME ASSIGNMENTS Screen The GAME DIFFICULTY and CONTINUE menu items can be set only when the SEAT NUMBER is set to either 1 or NO DEFINED The VS LIMIT OF WIN menu item can be set only when the SEAT NUMBER is set to 1 GAME DIFFICULTY Ge DEFAULT VIEW G SEAT NUMBER CARD R W CONTINUE MAX WIN STREAK www seuservice com Set the level of difficulty for the game You may select one of 5 different levels of difficulty VERY EASY EASY NORMAL HARD or VERY HARD This setting does not affect the speed of rivals in Legend of the Streets mode Set the view perspective at the start of races You may select one of the following 2 settings DRIVER view or REAR view Assign seat numbers to seats in each arcade unit for network play If you have two arcade units side by side make sure you assign different seat numbers the seat on the left would be 1 and the one on the right would be 2 If the unit will not be used for network play set the SEAT NUMBER to N
5. the instructions herein state that the serviceman should perform such work Be sure to turn off power before working on the machine To prevent electric shock be sure to turn off power before starting the work in which the worker touches the interior of product If the work is to be performed in the power on status the Instruction Manual herein always states to that effect Q Be sure to ground the Earth Terminal this however is not required in the case where a power cord with earth is used This product is equipped with the Earth Terminal When installing the product Connect the Earth Ter minal to the accurately grounded indoor earth terminal by using an earth wire Unless the product is grounded appropriately the user can be subject to electric shock After performing repair etc for the Control equipment ensure that the Earth Wire is firmly connected to the Control equipment Q Ensure that the Power Supply used is equipped with an Earth Leakage Breaker This product does not incorporate the Earth Leakage Breaker Using a power supply which is not equipped with the Earth Leakage Breaker can cause a fire when earth leakage occurs Q Be sure to use fuses which meet the specified rating only for the machines which use fuses Using fuses exceeding the specified rating can cause a fire and electric shock O Specification changes removal of equipment conversion and addition not designated by SEGA are not allowed The part
6. The winner is the car that crosses the finish line first or is occupying first place when time runs out A car built on the Card tuned car may also be used When racing with a tuned car results will be saved on the Card Challengers may challenge at any point during the champion side race Cards may not be purchased during a Network Battle Race 13 www seuservice com Before the Race Champion Side Battle Entry Challenge Request Screen When a challenge occurs before the start of the race during selection phase If the challenge occurs before the mode selection phase during Car Selection etc the Network Battle Race Information Screen is displayed directly before the selection phase If the challenge occurs after the selection phase selection is interrupted and the Network Battle Race Information Screen is displayed When a challenge occurs during the race The race is interrupted and the Network Battle Race Information Screen is displayed OPPONENT S INFO 0 Network Battle Race Information cred CONSECUTIVE wins The challenger selects the course POINTS while the champion waits at the WINNING PCT Network Battle Race Information BATTLE LEVEL Screen Change View NEXT YOUR OPPONENT IS NOW SELECTING A COURSE www seuservice com 14 Enter a Battle Race Network Battle Race Select Screen Steering SELECT OK This screen asks if a new player wishes to enter
7. battle and use them to customize your Course and Rival Character Selection Screens Usul Akagi counter clockwise 4 clockwise 500 www seuservice com 10 Speed Stars LEVIN SR AE85 RACE CESSE TDAY DRY 1 SPEEDY SPEED BOY Select BGM with Change View Button Rival Character Scenes em IGGY THIS IS A KICK MOUNTAINS ARE GREAT Battle Race TOTAL TIME DOG LAP TIME k 0 06 OO js DM ESS IGGY DRIVER SEGA AEBS TRUENO Results Screen BATTLE RESULT TOTAL TIME LAP TIME ADVANTAGE BATTLE POINTS 1000pts VICTORY BONUS pts ADVANTAGE BONUS opts PTS ACQUIRED 1000pts TOTAL POINTS 1000pts 11 www seuservice com Tune Up Screen Use your card to play and accumulate points you can put towards performance enhancing tune ups OPTI ON AA 4 YOU NOW HAVE 5000 TUNING POINTS m0000 pes statt WHEELS Continue Screen Choose to continue or quit after rival character scenes If you select YES nothing is recorded to the card and you can continue playing If you select NO your game data is stored on your card and your game ends www seuservice com 12 Game Content amp Rules This is a race against time The goal is to cross the finish line as quickly as you can Direction Time of Day and Weather can be selected for eac
8. purchased from or the office herein stated O When handling the Monitor be very careful Applies only to the product w monitor Some of the monitor TV parts are subject to high tension voltage Even after running off power some portions are still subject to high tension voltage sometimes Monitor repair and replacement should be performed only be those technical personnel who have knowledge of electricity and technical expertise Besure to adjust the monitor projector properly Applies only to the product w monitor Do not operate the product leaving on screen flickering or blurring as it is Using the product with the monitor not properly adjusted may cause dizziness or a headache to an operator a player or the cus tomers When transporting or reselling this product be sure to attach this manual to the product In the case where commercially available monitors and printers are used in this product only the con tents relating to this product are explained herein Some commercially available equipment has func tions and reactions not stated in this manual Read this manual together with the specific Instruction Manual of such equipment Descriptions herein contained may be subject to improvement changes without notice The contents described herein are fully prepared with due care However should any question arise or errors be found please contact SEGA INSPECTIONS IMMEDIATELY AFTER TRANSPORTING THE PRODUCT TO THE LOCA
9. the steps listed below to replace the Key Chip and GD ROM with the ones included in this kit Turn off the power Remove the truss screws one each from the left and right sides of the base lid R Unlock the lid using the master key Turn the lock handle on the base lid R to release the latch Tilt and let the seat rest on its backrest Taking care not to damage the seat gently lower until the backrest rests on the floor If the floor surface is hard spread a cloth or towel on the floor to protect the surface of the sheet from scratching LOCK HANDLE DROP CLOTH TO PREVENT DAMAGE TRUSS SCREW 2 black 5 12 FIG 2 1 www seuservice com 4 Replacing the Key Chip Gro The Key Chip is a precision part Exposure to heat or static electricity or collision with another object may damage it Be sure to handle it with care IMPORTANT The Key Chip must be used in conjunction with the game GD ROM disc contained in the same package Q Using the cabinet s NAOMI Network System Service Manual as reference remove the existing Key Chip from the game board and replace it with the Key Chip included in the kit Affix the sticker 442 0148B contained in the kit to the DIMM board case in the position indicated by the diagram KEY CHIP 259559 2555059 STICKER 442 00148B Sticker Position FIG 2 1 1 Replacing the GD ROM Gro Handle the surface of the GD ROM disc and the reader lens of the GD ROM dr
10. 1 USUI 2 USUI 3 AKAGI 1 AKAGI 2 AKAGI 3 AKINA 1 AKINA 2 AKINA 3 AKINA 4 AKINA 5 PRESS TEST BUTTON TO CONTINUE FIG 10 3 i b BOOKKEEPING 2 8 Screen Press the TEST Button to move to screen 3 8 of BOOKKEEPING GAME TEST MODE BOOKKEEPING 3 8 GAME LEGEND OF THE STREET IROHAZAKA 1 IROHAZAKA 2 IROHAZAKA 3 SNOW 1 HAPPOGAHARA 1 HAPPOGAHARA 2 HAPPOGAHARA 3 SHOMARU 1 SHOMARU 2 SHOMARU 3 TSUCHISAKA 1 TSUCHISAKA 2 TSUCHISAKA 3 TSUCHISAKA 4 TSUCHISAKA 5 TSUCHISAKA 6 SPECIAL PRESS TEST BUTTON TO CONTINUE FIG 10 3 ic BOOKKEEPING 3 8 Screen GAME LEGEND OF THE STREET Displays the number of times each rival character was selected in Legend of the Street mode MYOGI 1 refers to the first rival in MYOGI which is IGGY Press the TEST Button to move to screen 4 8 of BOOKKEEPING 37 www seuservice com GAME TEST MODE BOOKKEEPING 4 8 GAME TIME ATTACK MYOGI USUI AKAGI AKINA IROHAZAKA AKINA SNOW HAPPOGAHARA SHOMARU TSUCHISAKA PRESS TEST BUTTON TO CONTINUE FIG 10 3 i d BOOKKEEPING 4 8 Screen GAME TIME ATTACK Displays the number of times each course was selected in TIME ATTACK mode Press the TEST Button to move to screen 5 8 of BOOKKEEPING GAME TEST MODE BOOKKEEPING 5 8 GAME NETWORK GAME MYOGI 0 USUI 0 AKAGI 0 AKINA 0 IROHAZAKA AKINA SNOW HAPPOGAHARA SHOMARU TSUCHISAKA PRESS TEST BUTTON TO CONTINU
11. 1ST PRINTING JUNE 04 WWW seuservice com Software Conversion Kit Kit Installation Instructions amp Service Manual 1 2 PLAYER GAME SEGA AMUSEMENTS USA INC MANUAL NO 999 2080 GAME CODE TOSK VISIT OUR WEBSITE SegaService com O o ft Back Forward Stop Refresh Home AutoFill Print Mail O http www seuservice com Mac OS X Microsoft MacTopia SegaService com SegaServiceSales Mac OS X Hints Get the most from Help is on the way gt EGA SERVICE Bulletins Darl s Office Game Manuals LI LJ e 6 hn What s New If you have any questions or comments about this site please E Mail to Darl Davidson seu sega com yoogqdens N IO1SIH N saone ed what s new manuals bulletins assemblies specials Search staff Darl s office Return Parts Policy warranty corporate info plugins Non framed page ite Searc Sega Amusements USA 45133 Industrial Dr Fremont CA 94538 4415 701 6580 Y ou will need the following items to view this page in its entirety All Platforms Windows Macintosh Internet zone A BEFORE USING THE PRODUCT BE SURE TO READ THE FOLLOWING To maintain the safety To ensure the safe usage of the product be sure to read the following before using the product The following instructions are intended for the users operators and the personnel in charge of the oper
12. Akina ZACK KYLE RY TAK BUNTA EXPERT Irohazaka HAWK KYLE CAINE EXPERT Akina Snow MIKI EXPERT Happogahara DICE SMILEY TOUCH EXPERT Shomaru NOBU SID AKI EXPERT Tsuchisaka KYLIE RY Man in Evo V Man in Evo VI K T TAK www seuservice com LEVIN SR AE85 180SX TYPE X RPS13 CIVIC SiR II EG6 ROADSTER S Special NA6CE SKYLINE 25GT TURBO ER34 SILEIGHTY RPS13 SILVIA spec R S15 SILVIA Q s S14 RX 7 Type R FD3S SILVIA K s S13 SKYLINE GT R V spec II BNR32 LANCER GSR EVOLUTION III CE9A RX 7 FC3S TRUENO GT APEX 86 IMPREZA WRX type STi Version V GC8 LANCER RS EVOLUTION IV CN9A LANCER GSR EVOLUTION III CE9A MR2 G Limited SW20 CELICA GT FOUR ST205 CIVIC TYPE R EK9 INTEGRA TYPE R DC2 CIVIC TYPE R EK9 ALTEZZA RS 200 SXE10 CAPPUCCINO EA11R LEVIN GT APEX AE86 RX 7 Type R FD3S RX 7 ool II FC3S LANCER RS EVOLUTION V CP9A LANCER GSR EVOLUTION VI T M EDITION CP9A RX 7 Type R FD3S TRUENO GT APEX AE86 20 EXPLANATION OF TEST AND DATA DISPLAY By operating the switch unit periodically perform the tests and data check When installing the machine initially or collecting cash or when the machine does not function correctly perform checking in accordance with the explanations given in this section The following shows tests and modes that should be utilized as applicable This product
13. BUTTON FIG 10 3 ea INPUT ASSIGNMENTS Screen You can adjust each of the menu items by moving the cursor to the menu item and pressing the TEST Button Return all settings to the default settings with DEFAULT SETTING STEERING Make adjustments to STEERING Press the TEST Button to display the following screen GAME TEST MODE STEER ASSIGNMENT MIN 40 MAX 40 DEFAULT 0 STEERING XXX 0 CENTER RIGHT LEFT gt EXIT SELECT WITH SERVICE BUTTON AND PRESS TEST BUTTON FIG 10 3 eb STEER ASSIGNMENTS Screen www seuservice com 28 Center the STEERING When the 0 displayed is not exactly aligned with the A mark above CENTER use the cursor to select RIGHT or LEFT and move the 0 until it is displayed directly above the mark Move the cursor to RIGHT and press the TEST Button to move the 0 to the right Each time you press the TEST Button 0 moves slightly to the right Move the cursor to LEFT and press the TEST Button to move the 0 to the left Each time you press the TEST Button 0 moves slightly to the left Move the cursor to EXIT and press the TEST Button to return to the INPUT ASSIGNMENTS screen ACCEL Make adjustments to ACCEL Press the TEST Button to display the following screen Adjust the distance between 0 displayed GAME TEST MODE and the mark equally so that when your foot is off the ACCEL pedal the 0 on the left is aligns with the above MIN and
14. E Writting Error DRAW CARD ERROR Error in Taking Card from dispenser CARD STUFFED Card Jamming SHUTTER ERROR Shutter Error WRONG DATA Data Error Dispenser Card Empty CONNECTION ERROR Connection Error SCIF ERROR 8 RC 232C Communication Error UNKNOWN EROR Unknown Error The field in CHECK R W shows the result of the operation check cm Not Checked OK No Failure Failure www seuservice com 32 CLEANING PROCESS Cleaning refers to the optional cleaning of the heads on the CARD R W Refer to section lt 7 2 gt Head Cleaning for details on the use of the cleaning card Select CLEANING and press the TEST Button If the CARD R W is not initialized it will be initialized first INITIALIZE is displayed The following message appears to show that the R W is ready for insertion of the cleaning card PLEASE INSERT CLEANING CARD Insert the cleaning card into the R W On the screen the status display is replaced with CLEAN and cleaning begins Once cleaning ends after a lapse of a certain time the R W automatically ejects the card The status display changes from CLEAN to READY NO ERROR is displayed on the screen TESTING FUNCTIONALITY The operation check takes out each card from the dispenser and writes the sample data onto it The check then loads and reads it and checks whether the read data
15. E FIG 10 31e BOOKKEEPING 5 8 Screen GAME NETWORK GAME Displays the number of times each course was selected in NETWORK GAME VERSUS mode www seuservice com 38 Press the TEST Button to move to screen 6 8 of BOOKKEEPING GAME TEST MODE BOOKKEEPING 6 8 GAME BUNTA CHALLENGE MYOGI USUI AKAGI AKINA HAPPOGAHARA IROHAZAKA SHOMARU TSUCHISAKA TRANCEMISSION SELECT AUTOMATIC MANUAL PRESS TEST BUTTON TO CONTINUE FIG 10 3 i f BOOKKEEPING 6 8 Screen OGAME BUNTA CHALLENGE Displays number of times each course has been selected for the Bunta Challenge Displays the number of times each TRANSMISSION was selected in all game modes Press the TEST Button to move to screen 7 8 of BOOKKEEPING e TRANSMISSION SELECT GAME TEST MODE BOOKKEEPING 7 8 CAR SELECT TRUENO LEVIN AE86 LEVIN AE85 MR 2 MR S ALTEZZA CELICA GT FOUR GTR BNR32 GTR BNR34 SIL VIA S13 SILVIA S14Q SILVIA S14K SIL VIA S15 180SX SILEIGHTY CIVIC EK9 CIVIC EG6 PRESS TEST BUTTON TO CONTINUE FIG 10 3 i g BOOKKEEPING 7 8 Screen 39 www seuservice com Press the TEST Button to move to screen 8 8 of BOOKKEEPING GAME TEST MODE BOOKKEEPING 8 8 CAR SELECT INTEGRA S2000 LANCER EVO3 LANCER EVO4 LANCER EVO7 RX 7 FD3S1 RX 7 FD3S6 RX 7 FC3S ROADSTER NA6C O ROADSTER NB8C IMPREZA GC8S6 IMPREZA GDB IMPR
16. E FEEDBACK Screen FORCE Set the STEERING resistance The smaller the value the weaker the resistance the larger the value the stronger the resistance Minimum value is 0 the maximum value is 10 The default setting is 4 Move the cursor to UP or DOWN and press the TEST Button to change the value FORCE TEST Verifies the STEERING motor is working properly Conducted when the STEERING resistance is set at 4 Toggle between OFF and ON by aligning to CENTER and pressing the TEST Button The STEERING will rotate and stop in the center position Pressing the SERVICE Button moves the cursor to the next menu item and CENTER changes to OFF Control of the STEERING is then released When the RIGHT menu item is ON the STEERING rotates to the right as far as possible and then stops Press the SERVICE Button again to turn it OFF and release control of the STEERING When the LEFT menu item is ON the STEERING rotates to the left as far as possible and then stops Press the SERVICE Button again to turn it OFF and release control of the STEERING Move the cursor to EXIT and press the TEST Button to return to the Game Test Menu screen 27 www seuservice com E INPUT ASSIGNMENTS Select INPUT ASSIGNMENTS to display the following screen GAME TEST MODE INPUT ASSIGNMENTS STEERING DEFAULT 0 ACCEL DEFAULT 0 BRAKE XXX DEFAULT 0 DEFAULT SETTING gt EXIT SELECT WITH SERVICE BUTTON AND PRESS TEST
17. E SETTING BOOKKEEPING DIMM BOARD TEST BACKUP DATA CLEAR NETWORK SETTEING gt EXIT GAME TEST MODE a AOE K EEEk SELECT WITH SERVICE BUTTON AND PRESS TEST BUTTON gt EXIT SELECT WITH SERVICE BUTTON AND PRESS TEST BUTTON SYSTEM TEST MODE MENU Screen GAME TEST MENU Screen After making changes be sure to select EXIT and press the TEST Button in order to enable the new settings Move the cursor to EXIT and press the TEST Button to return to the System Menu screen www seuservice com 24 B INPUT TEST Select INPUT TEST to display the following screen and check the status of input devices This test should be used periodically to check that each input device is functioning correctly GAME TEST MODE INPUT TEST STEERING XXH ACCEL XXH BRAKE XXH GEAR POSITION N START OFF CHANGE VIEW OFF SERVICE OFF TEST OFF PRESS TEST AND SERVICE BUTTON TO EXIT FIG 10 3 b INPUT TEST Screen Test the STEERING ACCEL and BRAKE controls to ensure that they are functioning properly and that the parameters change smoothly as each input device is operated Display N UP and DOWN using the GEAR POSITION N should display there is no control input Verify that both UP and DOWN display in sync with the position of the shift knob Press the START CHANGE VIEW SERVICE and TEST Buttons If functioning correctly each indicator will switch from OFF to ON STEERING GEAR POSITION Shift knob
18. ER RS EVOLUTION IV CN9A LANCER RS EVOLUTION V CP9A MAZDA RX 7 FD3S RX 7 SPIRIT Type A FD3S RX 7oolII FC3S RX 8 Type S SE3P ROADSTER S Special NA6CE ROADSTER RS NB8C SUBARU IMPREZA WRX STi Version VI GC8 IMPREZA WRX STi GDB IMPREZA WRX type R STi Version V GC8 SUZUKI CAPPUCCINO EA11R LANCER GSR EVOLUTION VI T M EDITION CP9A LANCER GSR EVOLUTION VII CT9A Race Course Easy Myogi Circular Course 3 laps Clockwise amp Counter clockwise Day amp Night Fine amp Rainy Normal Usui Circular Course 2 laps Clockwise amp Counter clockwise Day amp Night Fine amp Rainy Hard Hard Expert Expert Expert Expert Expert Akagi Single road Uphill amp Downhill Day amp Night Fine amp Rainy Akina Single road Uphill amp Downhill Day amp Night Fine amp Rainy Irohazaka Single road Downhill Reverse Day amp Night Fine amp Rainy Akina Snow Single road Uphill amp Downhill Night Happogahara Single road Outbound amp Inbound Night Fine amp Rainy Shomaru Single road Outbound amp Inbound Day amp Night Fine amp Rainy Tsuchisaka Single road Outbound amp Inbound Day amp Night Fine amp Rainy www seuservice com Legend of the Street Rival Characters EASY Myogi IGGY KENJI SHINGO NORMAL Usui TORU KAWAI MAYA amp SIMONE HARD Akagi TWO GUYS FROM TOKYO DANNY HARD
19. EZA GC8S5 CAPPUCCINO SKYLINE 25GT ER34 LANCER EVO5 LANCER EVO6 RX 8 SE3P PRESS TEST BUTTON TO EXIT FIG 10 3 i h BOOKKEEPING 8 8 Screen CAR SELECT Displays the number of times each car was selected Press the TEST Button to return to the Game Test Menu screen www seuservice com 40 J BACKUP DATA CLEAR Delete all BOOKKEEPING screen data Use BACKUP DATA CLEAR in the SYSTEM TEST MODE to delete data about coin credit collection Deleting this data does not affect the game settings or other data stored by the game Deleting this data will delete the data showing how many times the CARD R W was used After deleting the data the CARD R W automatically enters Head Cleaning mode Refer to section lt 7 2 gt Head Cleaning for more information about head cleaning GAME TEST MODE BACKUP DATA CLEAR YES CLEAR gt NO CANCEL SELECT WITH SERVICE BUTTON AND PRESS TEST BUTTON FIG 10 3 j BACKUP DATA CLEAR Screen To clear data use the SERVICE Button to move the cursor to YES CLEAR and then press the TEST Button When the data has been cleared the message COMPLETED will be displayed Press the TEST Button again to return to the Game Test Menu screen Move the cursor to NO CANCEL and press the TEST Button to return to the Game Test Menu screen without clearing the data 41 www seuservice com Filler Page www seuservice com 42 Warranty Your new Sega Product i
20. Kit TOS ENG Sticker 840 0148B for shield case Card Package TOS Initial D3 ENG JASRAC Sticker TOS Sticker JASRAC V TOS Sticker Serial Number Instruction Card TOS Play Instructions TOS Monitor Side Left TOS Monitor Side Right TOS POP Art TOS Decal Seat Back Lower TOSK Decal Seat Back Mid TOSK Decal Seat Back Upper TOSK Decal Base Box TOS Qty E NO RRB Re mm www seuservice com DESIGNED RELATED PARTS versions such as INITIAL D Arcade stage Stage VocZ can be transtorred for use with version 3 999 2092 Instruction Card TOS gt Esos HENS MERLE Card Data Transferred data Es eet 2431 dE 999 2087 ferret Rankinen wnt try ta be the fastest driver in the Play Instructions TOS 999 2088 gt Monitor Side Left TOS lt 999 2089 Monitor Side Right TOS www seuservice com 999 2086 POP Art TOS 999 2084 Decal Seat Back Lower TOSK gt lt 999 2082 Decal Seat Back Mid 999 2083 Decal Seat Back Upper TOSK lt 999 2090 Decal Base Box TOS 3 www seuservice com UPGRADING WARNING Perform all operations with the power switch turned off Failure to do so may result in electrical shock and or short circuiting In addition working with the power turned on may result in fingers becoming caught and injured in the spinning fan motor REPLACING THE KEY CHIP AND GD ROM Follow
21. NGS the Card Data Confirmation Screen 2 TEMPE to go to the Configuration screen CONFIGURATION When displaying the configuration BGM Screen you can select the item by NAVIGATION WINDOW the Shift Lever After selecting the 22 STEERING item press the Start Button and TIME DISPLAY change the setting by the Steering FORCED QUIT OFF Wheel After changing the setting Lisi press the Start Button again to be LET CHANGE SETTINGS WITH GEAR SHIFT settled the new settings BGM Set race background music options ON Play BGM as normal Default Setting OFF Turn BGM off FIX Play the melody selected at Song Selection Will play the same BGM until changed NAVIGATION WINDOW Set options for the Navigation Display that appears at the lower left of the Race Screen ON Show navigation display Default setting OFF Do not show navigation display PAPER CUP A paper cup full of water appears on the navigation display STEERING Set steering wheel stiffness 1 to 9 1 is the loosest Stiffness increases up to a maximum setting of 9 Default Setting 1s 5 www seuservice com 16 TIME DISPLAY Set the Time Display on the Race Screen NORMAL Standard time display Default setting SIMPLE Simplified time display FORCED QUIT Force end of game during Legend of the Streets and Time Attack play OFF Disable force quit Default setting ON Enable force quit Press the Start and Change View Buttons si
22. O DEFINED You may select one of the following 3 settings 1 2 or NO DEFINED Set to ON if using the Card Reader Writer Set to OFF when not using the Card Reader Writer Enable Disable Continue function ON Enables Continue for Legend of the Street Time Attack and Network Battle Race games OFF Disable Continue Set maximum possible wins in the Battle Race game 1 3 5 10 20 30 Causes the continue screen to appear when the number of wins exceeds the indicated limit INFINITY Play continues without inserting new coins as long as the player continues to win 30 Changes to settings are not enabled until Test Mode is exited After changing settings be sure to exit Test Mode After changing the settings select EXIT and press the TEST Button to return to the Game Test Menu screen G CARD R W TEST D Clean the card reader writer periodically IMPORTANT Test the functionality of or clean the CARD R W read writer The CARD R W should be tested and cleaned periodically GAME TEST MODE CARD R W TEST CARD R W STATUS INITIALIZE CLEANING CHECK R W gt EXIT SELECT WITH SERVICE BUTTON AND PRESS TEST BUTTON FIG 10 3 g CARD R W TEST Screen The cursor can move to the following items INITIALIZE Initialization CLEANING Cleaning CHECK R W R W Operation Check Move the cursor to EXIT and press the TEST Button to return to the Game Test Menu screen 31 www seuservice com Dep
23. ORK SYSTEM SERIVCE MANUAL for the details Note that the set ting of the following items need to be performed in accordance with the instruction given CABINET TYPE 1 PLAYER S MONITOR TYPE HORIZONTAL SERVICE TYPE COMMON COIN CHUTE TYPE COMMON NETWORK TYPE NONE The SEQUENCE SETTING items of COIN CREDIT SETTING are as follows SEQUENCE SETTING SEQUENCE 1 Number of credits required for starting the game SEQUENCE 2 Number of credits required for continuing the play SEQUENCE 3 Number of credits required for dedicated CARD purchase SEQUENCE 4 8 NOT USED 23 www seuservice com 10 3 GAME TEST MODE When changing the game configuration changes will not take effect until the Game Test Mode has been completed Be sure to exit the Game Test Mode IMPORTANT properly after configuration changes Do not configure the game in ways not described in this text It is possible that the game will not function properly A GAME TEST MENU MODE Select GAME TEST MODE from the System Menu screen to display the Game Test Menu screen Use the SERVICE Button to move the cursor to the desired test item Press the TEST Button to enter the selected item SYSTEM MENU RAM TEST GAME TEST MODE JVS TEST SOUND TEST INPUT TEST C R T TEST OUTPUT TEST SYSTEM ASSIGNMENTS FORCE FEEDBACK COIN ASSIGNMENTS INPUT ASSIGNMENTS BOOKKEEPING GAME ASSIGNMENTS BACKUP DATA CLEAR CARD R W TEST CLOCK SETTING CLOS
24. PUT TEST mode To test each Output equipment in the OUTPUT TEST mode CARD R W TEST NETWORK SYSTEM SERVICE MANUAL 10 3F H 10 3B 10 3 10 3G CONTROL SYSTEM MONITOR To check each Input equipment in the INPUT TEST mode Adjust or replace each Input equipment If the problem still remains unsolved check each equipment s mechanism movements In the Monitor Adjustment mode check to see if Monitor Projec tor adjustments are appropriate NETWORK SYSTEM SERVICE MANUAL 10 3B D E 11 12 13 NETWORK SYSTEM SERVICE MANUAL 15 IC BOARD MEMORY TEST NETWORK SYSTEM SERVICE MANUAL DATA CHECK Check such data as game play time and histogram to adjust the difficulty level etc 21 NETWORK SYSTEM SERVICE MANUAL 10 3FI www seuservice com 10 1 SWITCH UNIT AND COIN METER A Never touch places other than those specified Touching places not specified can cause electric shock and short circuit accidents WARNING Adjust the sound to the optimum volume taking into consideration the environmental requirements of the installation location IMPORTANT Removing the Coin Meter circuitry renders the game inoperable SWITCH UNIT Open the coin chute door and the switch unit shown will appear The functioning of each SW is as follows B E Y D FIG 10 1 a SWITCH UNIT Note Actual Switch Unit will appear different ON SPEAKER TEST SERVICE DEMAG
25. TING to display the following screen Change the setting for the time when the store closes The game will be unusable for card play starting 15 minutes before the time you set until 6 00 AM the next morning GAME TEST MODE CLOSE SETTING SCHEDULE TYPE DAY SETTING gt EXIT SELECT WITH SERVICE BUTTON AND PRESS TEST BUTTON FIG 10 3 ha CLOSE SETTING Screen You can set SCHEDULE TYPE to DAY WEEK or OFF Press the TEST Button to select the item The unit is shipped with SCHEDULE TYPE set to OFF Move the cursor to SETTING and press the TEST Button to display the appropriate time setting screen DAY _ Set the daily store closing time This time setting will be used every day GAME TEST MODE CLOSE SETTING 24 00 gt EXIT SELECT WITH SERVICE BUTTON AND PRESS TEST BUTTON FIG 10 3 hb CLOSE SETTING DAY Screen Set the daily store closing time When you press the SERVICE Button the hour display will begin to flash Press the TEST Button to select any hour from 19 to 26 Press the SERVICE Button again to accept the hour selection Once accepted the minute display will then begin to flash Press the TEST Button to select one of the following minute options 00 15 30 45 Press the SERVICE Button again to accept the minute selection When complete move the cursor to EXIT If you press the SERVICE Button when the cursor is next to EXIT the hour display will begin to flash again indicating
26. TION Normally at the time of shipment SEGA products are in a status allowing for usage immediately after transporting to the location Nevertheless an irregular situation may occur during transportation Before turning on power check the following points to ensure that the product has been transported in a satis factory status Are there any dented portions or defects cuts etc on the external surfaces of the cabinet Are Casters and Adjusters damaged Do the power supply voltage and frequency requirements meet with those of the location Are all wiring connectors correctly and securely connected Unless connected in the correct direction connector connections can not be made accurately Do not insert connectors forcibly Do power cords have cuts and dents Do the fuses used meet specified rating Is the Circuit Protector in an energized status Are all accessories available Can all Doors and Lids be opened with the Accessory keys Can Doors and Lids be firmly closed ooog Initial D Ver 3 Naomi 2 Software Kit Contains List Before begining installation check to make sure the kit contains the following parts Details of the parts are given below Part 999 2080 610 0624 0033 442 00148 B 601 11358 01 421 8075 81 421 11409 12 421 7988 91 999 2092 999 2087 999 2088 999 2089 999 2086 999 2084 999 2082 999 2083 999 2090 Desc Upgrade Manual this document GD Software
27. a tion of the product After carefully reading and sufficiently understanding the warning displays and cautions handle the product appropriately Be sure to keep this manual nearby the product or else where convenient for referring to it when necessary Herein explanations which require special attention are enclosed with dual lines Depending on the potentially hazardous degrees the terms of WARNING CAUTION etc are used Be sure to under stand the contents of the displays before reading the text Indicates that mishandling the prod Indicates that mishandling the product uct by disregarding this warning by disregarding this caution will cause will cause a potentially hazardous a slight hazardous situation which can WARNING situation which can result in death AUTION result in personal injury and or material or serious injury damage For the safe usage of the product the following pictographs are used this display is attached to places where the Owner s Manual and or Service Manual should Indicates HANDLE WITH CARE In order to protect the human body an equipment be referred to Perform work in accordance with the instructions herein stated Instructions for work are explained by paying attention to the aspect of accident prevention Failing to perform work as per the instructions can cause accidents In the case where only those who have tech nical expertise should perform the work to avoid hazardous situation
28. a Battle Race It only appears when a new player first inserts coins and the current player has opted to accept Battle Race challengers CA LA 7 POINTS WINNING PCT OPPONENT S INFO NAME CONSECUTIVE WINS ChangeView NEXT Card Entry Screen When a Battle Race is established the Card Entry Screen appears A Battle can be raced even without a Card If there is no Card the game proceeds to the Car Selection and Transmission Selection Screens f oem The Course Selection Screen then DEN OME appears The challenger selects the i course ON 777751 CELL After the Race Results Screen RE BATTLE RESULT After a battle the Results Screen JE appears LAP TIME Depending on the results the Battle Level will change ADVANTAGE BATTLE POINTS VICTORY BONUS ADVANTAGE BONUS PTS ACQUIRED TOTAL POINTS 15 www seuservice com Continue Screen Continue LI The winning player will receive SELECT victory points and will be allowed to continue play The losing player will go to the Continue Screen When the number of victories exceeds the set limit When a player s total number of victories exceeds the set limit the player will be taken to the Continue Screen even if they win See Section 10 3 F Configuration When a Card is inserted a number of options may be set Press the View Change Button at Ten ee obus T SETTI
29. ansfer data You CANNOT use data from previo intil it is transferred to new card 724 277797 D 277797 LLL SALE MEME TAF LiL Ln 777757 s L7 FUE LILLE LI LULU LIT LL LL 77244 2 THE INITIAL D CARD WILL BE EJECTED THE OLD INITIAL D CARD CAN NO LONGE 17777 4 When the Card Data Transferred message appears the game will restart The new Card is for exclusive use with the Initial D Ver 3 and cannot be used with the previous versions Initial D and Initial D Ver 2 Limit on Card Use Each Card can be used for up to fifty plays until Car Inspection time 1s reached Continued game play after each race is not counted as part of the 50 game limit Cards may be renewed by transferring data to a new Card stored points will not be lost However if you do not renew your card at the Car Inspection you will not longer be able to play using the data stored on your card www seuservice com 18 Car Selections TOYOTA TRUENO GT APEX 86 LEVIN GT APEX AE86 LEVIN SR AE85 MR2 G Limited SW20 MR S S EDITION ZZW30 ALTEZZA RS 200 SXE10 CELICA GT FOUR ST205 NISSAN SKYLINE GT R V spec II BNR32 SKYLINE GT R V spec II BNR34 SKYLINE 25GT TURBO ER34 SILVIA K s S13 SILVIA Q s S14 SILVIA K s AERO S14 SILVIA spec R S15 180SX TYPE X RPS13 SILEIGHTY RPS13 HONDA CIVIC SiR II EG6 CIVIC TYPE R EK9 INTEGRA TYPE R DC2 2000 AP1 MITSUBISHI LANCER GSR EVOLUTION III CE9A LANC
30. ase performance 7 www seuservice com This screen isn t displayed if Select aModel you ve already purchased a card Transmission Selection Screen This screen isn t displayed if you ve already purchased a card Parts Course Selection Screen If you re purchasing a card select one of the Parts courses These parts are then attached to your car when you accumulate enough points CIBIE INSTALL PARTS A www seuservice com 8 Vehicle Selection Screen This screen isn t displayed if you ve already purchased a card Q Transmission Selection Screen This screen isn t displayed if you ve already purchased a card Parts Course Selection Screen If you re purchasing a card select one of the Parts courses These parts are then attached to your car when you accumulate enough points CIBIE INSTALL PARTS 9 www seuservice com Name Entry Screen If you re purchasing a card Enter our Name at the player name input screen Mscoe UVWXY lt gt Mode Select Screen Select Legend of the Street at the Mode Selection Screen SELECT Accei OK Brake enter your name driver s name EN mr FGHIJ KLMNO PQRST 21234 56789 at 4 TimeAttack mhimtaChalenge GAME DETAILS Cruise your way to the top of each stage and battle against your opponents the Streets Defeat all your opponents and become Legend of Collect POINTS from each
31. ending on the R W running mode one of the following is displayed in in CARD R W STATUS READY Now waiting Clear to Send Command INITIAL Now initializing Not Clear to Send Command CLEAN Now cleaning Not Clear to Send Command GET ense Cards are being taken out from the dispenser Not Clear to Send Command SAVE Sample data is saved onto the card Not Clear to Send Command Load card data and compares it with sample data Not Clear to Send Command OUT ness Eject cards Not Clear to Send Command SHUTTER Now closing opening the shutter Not Clear to Send Command ERROR Error Clear to Initialize Command Only While a status with a note of Not Clear to Send Command in parentheses is on screen no operations are accepted If such a status has occurred wait until the operation in that status stops automatically and the display comes to READY Occasionally the INFORMATION field on the screen outputs one of the instructions below although it usually displays NO ERROR While cleaning is in progress waiting in the ready mode for inserting a cleaning card PLEASE INSERT CLEANING CARD After the operation check waiting for the ready mode for ejecting the card PLEASE REMOVE When an error occurs its type are displayed in the INFORMATION field NO BRROR es Nomal Completion CAN T LOAD Loading Error CAN T SAV
32. h of the nine courses note that Happogahara and Akina Snow can only be set to Night Each checkpoint you pass adds time to the overall time limit When you cross the finish line a password is displayed The password is not displayed when you don t use the card You may use this password to participate in the online Internet rankings In order to register the password you must have played the game with a card and you ll need to enter the 3 digit number or KEY printed on the front of the card Your times when recorded with the Card tuned car are displayed in the ranking The way to accumulate points is to play with a card The Bunta Challenge Game Content amp Rules Race head to head against a single rival Fujiwara Bunta on eight different courses Myogi Usui Akagi Akina Snow on Level 11 Happogahara Shomaru and Tsuchisaka For each course only Dry or Night conditions may be selected A Card with saved points is necessary to play Player must finish ahead within the time limit to win Finishing behind or over the time limit means the player loses Beating Bunta earns points and increases the Bunta Level for that course by one The Bunta Level indicates Bunta s strength the higher the level the stronger he becomes Losing reduces the player s points total Network Battle Race Game Content amp Rules Two vehicles race for victory When either car passes a checkpoint remaining race time will be increased
33. ive with care to protect them from dirt and dust IMPORTANT Do not use the GD ROM disc if the surface has been scratched Using a scratched disc may cause the GD ROM drive to malfunction Be sure to place the GD ROM disc into the GD ROM drive with the label side facing up Using the cabinet s NAOMI Network System Service Manual as reference remove the existing GD ROM disc from the GD ROM drive and replace it with the disc included in the kit 5 www seuservice com CONFIRMING THE UPGRADE Using the Explanation of Test and Data Display section of the instruction manual contained in the kit as reference check to make sure that the upgrade has been performed correctly and that all systems are working properly Be sure to adjust the monitor to correct for any flickering or distortion before operating the product Refer to the Monitor section of the instruction manual included in the kit for details www seuservice com 6 Game Overview The game is a car racing game with three different game modes Legend of the Street Time Attack and The Bunta Challenge By connecting two units you can also enjoy Network Battle Game play The card system allows players to store information such as the car wins loss records and car tune up status on a special card Legend of the Street Game Content amp Rules Battle rival characters man to man on 9 different courses Each checkpoint you pass adds time to the overall time limit The fir
34. matches the sample data Then the check ejects the card When you draw out the card at this time the entire process of the check is completed The functionality test uses 1 card from the dispenser Select CHECK R W and press the TEST button R W operates automatically as follows If the CARD R W is not initialized it will be initialized first INITIALIZE is displayed Close the shutter SHUTTER is displayed Takes out the card from the dispenser GET is displayed Saves the sample data onto the card SAVE is displayed Print the sample data onto the card PRINT is displayed Loads the data on the card for comparison with the sample data LOAD is displayed Open the shutter SHUTTER is displayed Ejects the card OUT is displayed Draws out the card Now the entire process of the check is completed If execution of the operation check results in display of NG check the error condition If you can take action against the error execute the operation check again after you take the proper action If you cannot take action against the error repeat the check several times If the result of the check is still NG clean the R W If the subsequent execution of the operation check still results in NG the R W may be faulty If an error occurs it is cleared by executing the INITIALIZE command Note that when an error has occurred the R W only accepts this command except EXIT 33 www seuservice com H CLOSE SETTING Select CLOSE SET
35. multaneously to end game Game Over With Legend of the Street Time Attack and Network Battle Race play the Continue Screen appears after each race If you choose not to continue the game ends Transferring Old Card Data Card data from the previous versions Initial D and Initial D Ver 2 may be transferred for use with Initial D Ver 3 Not all player data will be transferred to the new Card Transferable Data Points car model player name customization options Auto Manual transmission setting number of plays till next inspection the number of plays remaining on the Card plus 50 max 127 Non transferable Data Tune up Tune up status is returned to default but transferred points may be used to re tune the car times race results Legend of the Street status Key and Speed Demon Level Network Battle Level Bunta Level 1 The player inserts coins to start Do you have an INITIALD Card AR HERI PLEASE INSERT YOUR CARD PRESS M THE START BUTT Player inserts Card at the Card Entry Screen 17 www seuservice com 2 Player inserts credits at the Transfer Card Data Screen Transfer INITIAL D Card Data Transfer the previous data to an INITIAL D ver 3 Card You need to transfer the previous INITIAL D Card data to a New INITIAL D Ver Card If you TRANSFER data Transferable data are as follows LEGEND OF THE STREET STATUS are NOT transferable If you DO NOT tr
36. re not displayed 35 www seuservice com I BOOKKEEPING Select BOOKKEEPING to display the following screens of operating status data Each time the TEST Button is pressed the ensuing page appears Pressing the TEST Button while the 5 5 page is displayed causes the Game Test Menu to return on the screen GAME TEST MODE BOOKKEEPING 1 5 NUMBER OF GAMES NUMBER OF NETWORK PLAY NUMBER OF CARD NUMBER OF CARD PLAY PLAY TIME OD OH OM OS AVERAGE PLAY TIME OM 05 LONGEST PLAY TIME OM 05 SHORTEST PLAY TIME OM 05 PLAY TIME HISTOGRAM OM OS 0M59S 1M OS 1M59S 2M OS 2M29S 2M30S 2M59S 3M 08 3M29S 3M30S 3M59S 4M OS 4M29S 4M30S 4M59S 5M 05 5 295 5M30S 5M59S 6M OS 6M29S OVER 6M30S OOO000000 0000 PRESS TEST BUTTON TO CONTINUE FIG 10 3 i BOOKKEEPING 1 5 Screen NUMBER OF GAMES total number of games played NUMBER OF NETWORK PLAY total number of network games played NUMBER OF CARD total number of cards purchased NUMBER OF CARD PLAY number of games played with cards selecting continue during card play gets added to this count PLAY TIME total amount of game play time AVERAGE PLAY TIME average game play time LONGEST PLAY TIME longest game play time SHORTEST PLAY TIME shortest game play time PLAY TIME HISTOGRAM table of play times www seuservice com 36 GAME TEST MODE BOOKKEEPING 2 8 GAME LEGEND OF THE STREET MYOGI 1 O MYOGI 2 MYOGI 3 USUI
37. s basic system consists of the NAOMI 2 GD ROM game board The system enables you to play several games one after the other just by changing a GD ROM disc and key chip The product supports therefore the following 2 test modes 1 System test mode for an automatic self diagnostic test generally used by every product that contains the basic system and a coin assignment specifically used by this product and 2 Game test mode for testing the input output control devices and setting the difficulty level specifically used by this product This manual does not cover the automatic self diagnostic test For more information about the system test mode see the attached NAOMI NETWORK SYSTEM Service Manual TABLE 10 EXPLANATION OF TEST MODE INSTALLATION MACHINE DESCRIPTION When the machine is installed perform the following 1 Check to ensure each is the standard setting at shipment 2 Check each Input equipment in the INPUT TEST mode 3 Check each Output equipment in the OUTPUT TEST mode 4 Test on IC Board IC s in the SELF TEST mode REFERENCE SECTIONS NETWORK SYSTEM SERVICE MANUAL 10 3F H 10 3B 10 3C NETWORK SYSTEM SERVICE MANUAL MEMORY This test is automatically executed by selecting RAM TEST or ROM BOARD TEST in the Menu mode NETWORK SYSTEM SERVICE MANUAL PERIODIC SERVICING Periodically perform the following MEMORY TEST Ascertain each setting To test each Input equipment in the IN
38. s covered for a period of 90 days from the date of shipment This certifies that the Printed Circuit Boards Power Supplies and Monitor are to be free of defects in workman ship or materials under normal operating conditions This also certifies that all Interactive Control Assemblies are to be free from defects in workmanship and materials under normal operating condi tions No other product in this machine is hereby covered Sellers sole liability in the event a warranted part described above fails shall be at its option to re place or repair the defective part during the warranty period For Warranty claims contact your Sega Distributor Should the Seller determine by inspection that the product was caused by Accident Misuse Ne glect Alteration Improper Repair Installation or Testing the warranty offered will be null and void Under no circumstances is the Seller responsible for any loss of profits loss of use or other dam ages This shall be the exclusive written Warranty of the original purchaser expressed in lieu of all other warranties expressed or implied Under no circumstance shall it extend beyond the period of time listed above SEGA ENTERPRISES INC USA 45133 Industrial Drive Fremont CA 94538 415 701 6580 phone 415 701 6594 fax
39. s of the product include warning labels for safety covers for personal protection etc It is very hazardous to operate the product by removing parts and or modifying the circuits Should doors lids and protective parts be damaged or lost refrain from operating the product and contact where the product was purchased from or the office herein stated SEGA shall not be held responsible for any accidents compensation for damage to a third party resulting from the specifications not designated by SEGA O Ensure that the product meets the requirements of appropriate Electrical Specifications Before installing the product check for Electrical Specifications SEGA products have a nameplate on which Electrical Specifications are described Ensure that the product is compatible with the power supply voltage and frequency requirements of the location Using any Electrical Specifications different from the designated Specifications can cause a fire and electric shock Install and operate the product in places where appropriate lighting is available allowing warning labels to be clearly read To ensure safety for the customers labels and printed instructions describing potentially hazardous situ ation are applied to places where accidents can be caused Ensure that where the product is operated has sufficient lighting allowing the warnings to be read If any label is peeled off apply it again imme diately Please place an order with where the product was
40. st one across the finish line with the allotted time wins If you run out of time or cross the finish line second you lose Once you ve defeated all 28 rival characters you ll get a chance to race against a hidden rival character I and a hidden rival character II final battle race Defeat them and you ll race for the title of street legend against the last hidden rival character special battle race Only when the title is yours will you get to see the ending INITIAL D CARD Purchasing a card when you start the game creates your car HR The card can store all the data for one car Information on the card i ORIVER Players name pr includes the player name car tune up status names of defeated rival characters times from Time Attack mode Network Game records Cleared areas Speed Demon Leel passwords from Time Attack mode and more On the Card Screen the player s name car name cleared areas Key and Speed Demon Level are displayed The Key is necessary when recording results on the Net Rankings Speed Demon Level stars increase as various conditions are cleared OCar Tune Ups Depending on how well you do points are added to your card when you use it to play in Legend of the Street Time Attack The Bunta Challenge and Network Battle Race modes When you ve accumulated enough points you are given the option of using those points to do tune ups on your car to incre
41. that you can change the settings Move the cursor to EXIT and press the TEST Button to return to the CLOSE SETTING screen www seuservice com 34 WEEK Set a different store close time for each day of the week GAME TEST MODE CLOSE SETTING SUN 24 00 MON 24 00 TUE 24 00 WED 24 00 THU 24 00 FRI 24 00 SAT 24 00 gt EXIT SELECT WITH SERVICE BUTTON AND PRESS TEST BUTTON FIG 10 3 hc CLOSE SETTING WEEK Screen Set the store closing time for each day of the week When you press the SERVICE Button the hour display will begin to flash Press the TEST Button to select any hour from 19 to 26 Press the SERVICE Button again to accept the hour selection Once accepted the minute display will then begin to flash Press the TEST Button to select one of the following minute options 00 15 30 45 Press the SERVICE Button again to accept the minute selection Once accepted the hour display for the next day of the week will begin to flash Set the hour and minute settings in the same fashion as described above When you have completed setting the time for SAT move the cursor to EXIT If you press the SERVICE Button when the cursor is next to EXIT the hour display for SUN will begin to flash again indicating that you can change the settings Move the cursor to EXIT and press the TEST Button to return to the CLOSE SETTING screen OFF Do not set any store closing times Other SETTING items a
Download Pdf Manuals
Related Search