DS110/DS210/DS310
Contents
1. Weight w o rail 1 45 Ib 1 60 Ib Peso sin el carril 66 kg 41 kg 73 kg Poids sans la voie 66 kg 41 kg 73 kg Height w o rail 3 Alto sin el carril 101 6mm 101 6 Hauteur sans la voie 101 6 mm 101 6 Length 16 75 7 17 51 Largo 178 444 Longueur 425 178 444 _ Capacidad tornillos 50 tornillos 50 50 Capacit fixations 50 50 50 Gama de tornillos 16 51 mm 16 51 16 76 Longueurs des fixations 16 51 mm 16 51 16 76 Limited Warranty SENCO Pneumatic DuraSpin Cordless Tools amp Compressors Fastener Capacity Fastener Range 5 8 2 3 Senco Brands Inc SENCO designs and constructs its products using the highest standards of material and workmanship SENCO warrants to the original retail purchaser that the following products will be free from defects in material or workmanship for the warranty period specified below SENCO XP Series Red Cap SENCO PRO Series SENCO Compressors Five years One year One year Two Years One year Two years One Year Two Years One Year Two Years During the warranty period which begins on the purchase date SENCO will repair or replace at SENCO s option and expense any product or part that is defective in materials or workmanship after examination by a SENCO Authorized Warranty Service Center subject to the exceptions exclusions and limitations described below Any replace2. regulated compressed air has been used at air pressure not exceeding the maximum indicated on the tool casting B No evidence of abuse abnormal conditions accident neglect misuse or improper modifications or storage of the product and C No Deviation from operating instructions specifications and maintenance schedules exists read Operator Manual for use specifications and maintenance instructions THIS WARRANTY IS THE ONLY WARRANTY ON THE PRODUCT AND SENCO DISCLAIMS ALL OTHER WARRANTIES ANY IMPLIED WARRANTIES WILL BE LIMITED IN DURATION TO THE APPLICABLE WARRANTY PERIOD SPECIFIED ABOVE SOME STATES DO NOT ALLOW LIMITATIONS ON HOW LONG AN IMPLIED WARRANTY LASTS SO THE ABOVE LIMITATION MAY NOT APPLY TO YOU YOUR REMEDIES ARE SOLELY AND E XCLUSIVELY AS STATED ABOVE SENCO SHALL IN NO EVENT LIABLE FOR INCIDENTAL CONSEQUENTIAL INDIRECT OR SPECIAL DAMAGES SOME STATES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES SO THE ABOVE LIMITATION OR EXCLUSION MAY NOT APPLY TO YOU IN NO EVENT WHETHER AS A RESULT OF A BREACH OF CONTRACT WARRANTY TORT INCLUDING NEGLIGENCE OR OTHERWISE SHALL SENCO S LIABI LITY EXCEED THE PRICE OF THE PRODUCT WHICH HAS GIVEN RISE TO THE CLAIM OR LIABILITY ANY LIABILITY CONNECTED WITH THE USE OF THIS PRODUCT SHALL TERMINATE UPON THE EXPIRATION OF THE WARRANTY PERIOD SPECIFIED ABOVE NO EMPLOYEE OR REPRESENTATIVE OF SENCO OR ANY DISTRIBUTOR OR DEALER IS AUTHORIZED TO MAKE ANY CHANGE
3. OR MODIFICATION TO THIS WARRANTY This warranty gives you specific legal rights and you may also have other rights which vary from state to state REPLACEMENT OF TOOL DUE TO NATURAL DISASTER SENCO will replace any tool destroyed by an Act of God such as flood earthquake hurricane or other disaster resulting only from the forces of nature Such a claim will be honored provided that such original retail purchaser had previously submitted a completed warranty registration card for the tool and then submits proof of ownership and an acceptable statement describing such Act of God documented by an insurance carrier police department or other official governmental source To obtain instructions for filing a claim call 1 800 543 4596 CUSTOMER SATISFACTION One hundred percent customer satisfaction is our 1 goal If for any reason the product does not perform to the original purchaser s satisfaction it can be returned to the place of purchase within thirty days with dated sales receipt for a full refund of the purchase price 2006 2009 by SENCO BRANDS INC CINCINNATI OHIO 45244 1611 USA www senco com 051208
4. en las condiviones apropiadas debe usar m scara para polvo calzado de seguridad antidesli zante casco duro o protecci n para los o dos El no utilizar estos elementos puede ocasionar lesiones Servicio t cnico Las tareas de servicio tecnico de la herramienta deben ser realizadas s lo por personal de reparaciones de Senco autorizado Las tareas de servicio o mantenimiento realizadas por personal no clificado purden ocasionar riesgos de lesiones x Carga de la herramienta Aseg rese de que las cabezas de los tornillos descansen contra el material pl stico de intercalaci n De este modo se evitar n da os a la gu a de la faja Cuando utilice una herramienta de x Soyez en bonne condition phy travail propre et bien clai r e Des tablis en d sordre et des zones mal clair es augmentent les risques d accident CONSERVEZ CES INSTRUCTIONS Maintenez les spectateurs enfants et visiteurs a lorsque vous utilisez de loutillage lectrique Toute distraction risque de vous faire perdre le contrdle de votre outil S curit corporelle sique soyez attentif a ce que vous faites et faites preuve de bon sens lorsque vous utilisez un outillage lectrique N utilisez pas votre outil si vous tes fatigu ou sous l influence de drogues alcool ou m dicaments Un moment d inattention lors de l utilisation d un outillage lectrique peut tre la cause de graves bl
5. ERE SBAO08 SLIDE BODY ASSEMBLY CONJUNTO DE CUERPO DESLIZANTE ASSEMBLAGE BLOC GLISSIERE SPR021 FEED SPRING cusco MUELLE RESSORT 5 022 FEED SPRING comia MUELLE across RESSORT 0807 HARDWARE General Safety Rules Safety Warnings Avisos de Seguridad Consignes de S curit Francais Avertissement Maintenez votre zone de English Warning Read and understand all Espanol Advertencia Lea y comprenda todas las Authorized Service Center instructions Failure to follow all instructions listed below may result in electric shock fire and or serious personal injury SAVE THESE INSTRUCTIONS Keep bystanders minors and visitors away while operating a power tool Distractions can cause you to lose control Personal Safety Stay alert watch what you are do ing and use common sense when operating a power tool Do not use tool while tired or under the influence of drugs alcohol or med ication A moment of inattention while operating power tools may result in serious personal injury Do not overreach Keep proper footing and balance at all times Proper footing and balance enable better control of the tool in unex pected situations Use safety equipment Always wear eye protec tion Dust mask non skid safety shoes hard hat or hearing pr
6. SENCO HAN ISANTA VEY MEMBER en este manual 05110 05210 05310 Attachment Operating Instructions Instrucciones de Operacion oleo Md a a e e 2012 by Senco Brands Inc Warnings for the safe use of this tool are included in this manual Los avisos para el uso seguro de esta herramienta est n incluidos NFD86Y Revised June 4 2012 Replaces 11 4 11 Les consignes pour l utilisation en toute s curit de cet outil se trouvent dans ce manuel osrionsziomssio 025 Model A DS110 006 SPRO21 DS210 SBA007 SPRO21 DS310 5 008 5 022 REPLACEMENT PARTS LISTeLISTA DE PARTES DE REPUESTO LISTE DE PIECES DE RECHANGE DESCRIPTION DESCRIPCI N DESIGNATION GTROOD5 FEED GU oia GU A DEL TORNILLO GUIDE DE VIS GTROOG GUIDE RAIL CARRIL DE GUIA e seessssseesseseesseeseesees VOIE DE GUIDE GTROO 7 GUIDE RAIL isaac CARRIL DE 4 4444 49 VOIE DE GUIDE 25 TOE NAIL PIEZA DE LA EMBOUT 26 FLUSH NOSEPIECE PIEZA DE LA BOCA EMBOUT 5 008 SLIDE BODY ASSEMBLY CONJUNTO DE CUERPO DESLIZANTE ASSEMBLAGE BLOC GLISSIERE SBAO08 SLIDE BODY ASSEMBLY CONJUNTO DE CUERPO DESLIZANTE ASSEMBLAGE BLOC GLISSI
7. e tige de vissage dans le collier du tournevis lectrique 6 Placez le liaccessoire sur de nouvelles et sur l adaptateur 7 Serrer l crou d aile R glage de la lon gueur de fixation Avant diajuster liextremite rotative en fonction de la longueur de la fixation nioubliez pas de debrancher lioutil Retour a la vis de r glage 2 en utilisant un tournevis cruciforme Il n est pas n cessaire de supprimer completement la vis Alignez les marques de longueur sur le nez avec vis de fixation Phillips pas de fixation disque pour r glage de la longueur correcte Resserrer la vis de r glage faire en sorte qu il soit bien serr contre le nez Installation D Outil D branchez la prise Elec trique de l outil 1 Retirez llaccessoire installe sur le tournevis 2 Retirer ogive du fabricant de l outil 3 Retirer du fabricant bits et le support 4 Avec la cle Allen fournie desserrez la vis sur liadapta teur 5 Branchez l adaptateur sur le tournevis ce qu elle soit pleinement assis et s curis 6 Installez l enrouleur impulsif Senco en assurant que cette affirm e pleinement ceci peut requ rir force 7 Glisse l accessorio dans l adaptateur Serrez la vis est maintenant li et vous tes pr te com mencer propulser des vis TECHNICAL SPECIFICATIONS ESPECIFICACIONES TECNICAS SP CIFICATIONS TECHNIQUES 05110 05210 05310 05110 05210 05310 05110 05210 05310
8. es sures corporelles pr sumez pas de vos forces Restez bien stable et en quilibre tout moment Une position stable et bien quilibr e vous permettra de mieux r agir a une situation inattendue Utilisez des quipements de s curit Portez toujours des lunettes de protection Utilisez un masque de protection contre la poussi re des chaussures antid ra pantes un casque et des protections auditives pour travailler dans les meil leures conditions Un manquement a ces regles de s curit peut provoquer des accidents corporels Entretien L entretien de ne doit tre assur que par du personnel autoris et qualifi de Senco De assure ou des r parations effectu es par du personnel non qualifi peuvent occasionner des risques d accident Chargement de l outil V rifiez que les t tes des vis reposent bien sur le sommet de la bande collectrice en plastique pour viter d endommager le guide Safety Warnings Avisos de Seguridad English Move the strip forward until the first screw is aligned with the bit This will allow for the proper strip advancement once the nosepiece is de pressed To remove the strip pull it through from the bottom of the nosepiece 1 Pull the trigger to start the motor Engage trigger lock if desired Be sure Screwgun is operating in forward clockwise direction Screw will
9. mariposa Ajuste del largo del tornillo Desenchufe la herramienta de la fuente de alimentaci n electrica antes de ajustar la pieza de boca al largo del tornillo Retire la perilla de ajuste utilizando el destornillador Phillips 2 No es necesario que lo remueva completamente Alinee los indicadores en la nariz de la herramienta para alineamiento y ajuste de la longitud del sujetador a aplicar Vuelva a apretar la perilla de ajuste asegurandose que quede bien ajustado a la pieza de la nariz Como ensamblar la herramienta 1 Desconecte la herramienta de la fuente el ctrica 2 Retire la proteccion de la nariz de la herramienta 3 Retire la punta original y el sujetador de esta 4 Elija el adaptador que coincida con la marca y modelo del atornillador que esta utilizando 5 Coloque el adaptador en el atornillador asegurandose que quede bien ajustado y seguro 6 Instale adecuadamente la punta que se necesite asegurandose que quede totalmente ajustada esto puede requerir un poco de fuerza 7 Deslice el acople por el adaptador Asegure el tornillo de mariposa El accesorio esta ahora instalado y listo para aplicar los tornillos Outil 1 Se desserrent l ecrou papil lon 2 Enlevez liaccessoire installe sur le tournevis elec trique 3 La tige de vissage devrait Itre visible 4 Enlevez la tige de vissage du collier une certaine force sera neces 5 Inserez une nouvell
10. ment product or part will carry a warranty for the balance of the warranty period applicable to the replaced product or part ADATED SALES RECEIPT OR PROOF OF PURCHASE FROM THE ORIGINAL RETAIL PURCHASER IS REQUIRED TO MAKE A WARRANTY CLAIM Product registration can be accomplished through on line Product Registration at www senco com or by completing and returning the postage paid product registration form included with your Operator s manual p arts chart inform ation found inside the product carton To make a warranty claim you must return the product with proper receipt proof of purchase and return transportation charges prepaid to a SENCO Authorized Warranty Service Center A list of SENCO Authorized Warranty Service Centers can be found at www senco com or by calling 1 800 543 4596 toll free SENCO will perform its obligations under this warranty within a reasonable time after approval of the warranty claim Wheelbarrow Compressors 1 Subject to the exceptions exclusions and limitations described below SENCO warrants that the compressor pump will be free from defects materials and workmanship for two years after the purchase date 2 Defective parts of the compressor pump not subject to normal wear and tear will be repaired or replaced at SENCO s option during the two year warranty period If SENCO determines that repair or replacement is not feasible SENCO will refund the purchase price less reasonable depreciation based on actual u
11. not advance and Bit will be damaged 2 Press the nosepiece with constant force against the work surface Do not remove the tool from the work surface until the clutch disengages and the bit stops rotating signaling a fully driven screw 3 Continue to allow the mo tor to run The next screw will be automatically fed into place when the tool is removed from the work surface To adjust the depth of drive 1 release the adjustment thumbwheel by sliding and holding the block to the unlock position Then 2 turn the thumbwheel to the desired position This tool has a depth sensing clutch When the screw is countersunk to the pre set depth it automatically disengages and makes a click or racheting sound This is normal and signals completion of the drive Changing the bit Due to wear or damage the bit will need to be replaced periodically or when changing from Phillips to Square Drive fasteners Espanol Haga avanzar la faja hasta que primer tornillo quede alineada con la broca De este modo se permitir que la faja avance en forma adecuada se presione la pieza de la boca Para retirar la faja tire de ella a traves de la parte inferior de la pieza de la boca 1 Presione el accionador para arrancar el motor Ase grese de que la herramienta colocadora de tornillos este funcionando hacia adelante a la derecha El tornillo no avanzar y se daoar la broca 2 Presione la pieza de la boca eje
12. otec tion must be used for appropriate conditions Failure to do so could result in personal injury Service Tool service must be performed only by Authorized Senco repair personnel Service or maintenance performed by unqualified personnel may result in a risk of injury Loading the Tool Check to be sure the heads of the screws are resting on top of the plastic collation material This will prevent damage to the strip guide instrucciones La falta de ob servaci n de todas las instruc ciones listadas a continuaci n puede causar choque el ctrico incendios o lesiones graves GUARDE ESTAS INSTRUCCIONES Mantenga s los acompa antes menores y visitas alsjados mien tras usted utiliza la herramienta de motor Las distracciones pueden hacer que usted pierda el control Seguridad personal motor mant ngase a erta preste atenci n a lo que est haciendo y aplique el sentido com n No use la herramienta cuando se sienta cansado o se encuentre bajo los efectos de drogas alchol o medi camentos Un momento de falta de atenci n mientras utiliza una herramienta de motor puede ocasionar lesiones graves Xx No se estire para trabajar Mantenga en todo momento una posici n adecuada y el equilibrio La posici n y el equilibrio adecuados le permiten contrilar mejor la herramienta ante situaciones inesperadas Use equip de seguridad Use siempre protecci n para los ojos A fin de trabajar
13. rciendo una fuerza constante contra la super ficie de trabajo No retire la herramienta de la superficie de trabajo hasta que el embrague se desenganche y la broca deje de girar lo que indica que el tornillo se ha embutido totalmente 3 Contin e haciendo funcio nar el motor El siguiente tor nillo se alimentar autom ti camente cuando quitado de la superficie de trabajo Para ajustar la profundidad de clavado 1 libere la ruedecilla para el ajuste deslizando y deteniendo el seguro hacia la posici n de abierto Despu s 2 gire la ruedecilla para el ajuste en la posici n deseada Esta herramieenta tiene un em brague que determina la profundi dad Cuando el tornillo se embute a una profundidad preconfigurada el embrague se desacopla autom tica mente y hace un clic o un sonido de trinquete Esto es normal e indica la finalizaci n del impulso Cambio de la broca La broca se deber reem plazar peri dicamente a causa del desgaste o da os o cuando se cambia de tornillos Phillips a tornillos para broca de punta cuadrada Consignes de Securite Francais Faites avancer la bande jusqu a ce que premiere vis align e avec la broche Ceci permettra un avancement cor rect de la bande des que Pon fera pression sur le nez Pour enlever la bande tirez la par le bas de liextremite rotative 1 Appuyez sur la gachette pour d marrer le moteur Assurez vous que le pistolet est place en mode avant
14. se SENCO Cordless 1 Subject to the exceptions exclusions and limitations described below SENCO warrants that the SENCO Cordless tool will be free from defects in materials and workmanship for two years after the purchase date 2 Subject to the exceptions exclusions and limitations described below SENCO warrants that the batteries and chargers used with SENCO Cordless tools will be free from defects in material and workmanship for one year after the purchase date WARRANTY EXCLUSIONS The following warranty exclusions apply 1 Normal wear parts are not covered under this warranty Normal wear parts include for example isolators drive belts air filters rubber o rings seals driver blades piston stops piston driver assembly and fuel stems 2 This warranty does not cover parts damaged due to normal wear misapplication misuse accidents operation at other than recommended speeds or voltage electric units only improper storage or damage resulting during shipping Products used in production industrial applications as defined by SENCO are excluded from this warranty Labor charges or loss or damage resulting from improper operation maintenance or repairs are not covered by this warranty SENCO does not warrant the Wheelbarrow Compressor Engine Motor but the Compressor Engine Motor may be covered under a warranty offered by its manufacturer oe GENERAL WARRANTY CONDITIONS This warranty will be honored only if A Clean dry
15. sens horaire La vis niavancera pas et la tige de vissage sera endommagee 2 Appuyez le nez sur la sur face de travail avec une pres sion constante N enlevez pas Poutil de la surface de travail avant d brayage et arr t de la rotation de la broche indiquant que l op ration de vissage est completement termin e 3 Appuyez de nouveau sur la gachette pour permettre au moteur de tourner La vis suivante sera automatiquement aliment e a l outil est enlev de surface de travail Pour r gler la profondeur de clouage il faut 1 relacher la molette de r glage en glissant le bloc et en le tenant a la position de d verrouillage Ensuite il faut 2 tourner la molette de r glage jusqu a la position d sir e Cet outil poss de un dispositif de mesure de profondeur avec d brayage Lorsque la vis arrive la profondeur pr d termin e le dispositif se d braie automatique ment et produit un clic signifiant que le vissage est termin Changement de la broche La broche doit tre remplac e p riodiquement en raison d usure ou de dommage ou de changement entre vis t te Phillips ou carr es Operation Operaci n de English 1 Loosen wing nut 2 Re move attachment from screw gun 3 Bit is now exposed 4 Remove bit some force required from collar 5 Insert new bit in screwgun collar 6 Guide attachment over new bit and onto the adapter 7 Tighten wing nut Adjus
16. ting Fastener Length Unplug tool from electrical supply before adjusting nose piece for fastener length Back out adjustment screw using 2 Phillips screwdriver It is not necessary to completely remove screw Align length markings on the nosepiece with set screw not phillips drive fastener for correct length adjustment Retighten the adjusting screw making sure it is snug against the nosepiece Tool Installation Disconnect tool from electri cal supply 1 Remove man ufacturer s bit and bit holder 2 Remove the manufacturer s nosecone from the tool 3 Remove manufacturer s bit and holder 4 Choose the adapter which matches the screwdriver model and brand you are using 5 Attach the adapter onto the screwdriver ensuring it is fully seated and secure 6 Install the appropriate Senco bit making sure it is fully seated this may require some force 7 Slide the attachment onto the adapter Tighten wingscrew The attachment is now installed and you are ready to begin driving la Herramienta Espanol 1 Aflojan la tuerca de ala 2 Retire el suplemento a la her ramienta colocadora de tornil los 3 Ahora queda expuesta la broca 4 Retire la broca del collar Se requiere un poco de Utilisation de Francais fuerza 5 Inserte la nueva punta en el cuello de la herramienta 6 Coloque el accesorio nuevamente en el adaptador sobre la punta 7 Apriete nuevamente la tuerca
Download Pdf Manuals
Related Search
DS110/DS210/DS310