Home

Model 28811 Series DECT 6.0 Cordless Handset Speakerphone

image

Contents

1. Voice Mail Waiting Indicator VMWI Visual Ringer TALK button CALLER ID VOLUME caller id volume up button END cancel button GOOG 411 Google free one touch directory assistance pause button redial format button Baselayout do not find t disturb ECT charge in use voicemail charge in use voicemail find indicator button do not disturb button 13 Installing the Phone Installing the Handset Battery NOTE You must connect the handset battery before use CAUTION To reduce the risk of fire or personal injury use only the Thomson Inc approved Model 5 2814 Nickel metal Hydride battery Ni MH which is compatible with this unit 1 Locate battery and battery door which are packaged together inside a plastic bag and are separate from the handset 2 Locate the battery compartment on the back of the handset 3 Plug the battery pack cord into the jack inside the compartment NOTE To ensure proper battery installation the connector is keyed and can be inserted only one way BATTERY PRESS DOWN FIRMLY RED WIRE 4 Insert the battery pack 5 Close the battery compartment by pushing the door up until it snaps into place 14 Base Station
2. REMARQUE Il est important de formater correctement les dossiers d identification de l appelant AVANT de les m moriser parce qu il est impossible de les reformater lorsqu ils sont d j en m moire 1 Assurez vous que le t l phone est D SACTIV pas en mode conversation 2 Utilisez le bouton CALLER ID VOLUME w ou 4 pour atteindre le dossier d appelant d sir 3 Appuyez sur le bouton mute menu OK pour stocker le nombre SAVED TO MEMORY s affiche REMARQUE Appuyez une fois sur le bouton END cancel pour conserver les param tres pr c dents sans modification et revenir au menu REMARQUE Si l information du dossier de l appelant contient des donn es non num riques l appareil ne permettra pas de transf rer ce dossier la m moire int gr e de l utilisateur Le combin affichera IMPOS MEMORISER Suppression du Dossier d appelant 1 Assurez vous que le t l phone est D SACTIV pas en mode conversation 2 Utilisez le bouton CALLER ID VOLUME ou 4 pour atteindre le dossier d sir 3 Appuyez sur delete intercom conf L afficheur indique EFF AFFICHEUR 4 Appuyez de nouveau sur le bouton delete intercom conf pour effacer le dossier le dossier d appelant suivant appara t dans l afficheur Vous entendrez une tonalit de confirmation REMARQUE Appuyez sur le bouton END cancel pour revenir au mode 44 en attente sans effacer de dossiers d identification de l appelant Suppression de Tous les Dossiers D
3. pas en mode conversation Appuyez sur le bouton delete intercom conf du combin Utilisez le clavier num rique pour choisir le combin que vous souhaitez rechercher REMARQUE Pour annuler la recherche appuyez de nouveau sur le bouton delete intercom conf ou sur le bouton END cancel Attendez que la personne au combin r cepteur appuie sur le bouton delete intercom conf REMARQUE Si le combin r cepteur ne r pond pas dans les deux minutes l appel par interphone est automatiquement annul Le combin d origine affiche AUCUNE REPONSE 37 5 Quand vous avez termin appuyez sur le bouton END cancel ou le bouton delete intercom conf de l un ou l autre combin pour d sactiver l interphone REMARQUE Le syst me est extensible jusqu 6 combin s avec l achat du combin optionnel Mod le 28801 avec socle de chargement Lorsque 4 combin s sont enregistr s le syst me peut fonctionner comme 2 interphones s par s en m me temps par exemple le combin 1 communique avec le combin 2 pendant que le combin 3 communique avec le combin 4 Reception d un Appel D interphone Votre combin met un signal lorsque vous recevez un appel d interphone Appuyez sur le bouton delete intercom conf ou sur le bouton TALK pour r pondre l appel Fonctions Avancees de L interphone Recevoir un Appel Pendant un Appel D interphone Si vous recevez un appel t l phonique pendant un appel d interphone ce dernier est imm dia
4. exp dier le produit Les dispositions de cette garantie s ajoutent sans les modifier ni les restreindre aux garanties l gales et autres droits ou recours pr vus par toute l gislation applicable pour autant que ces dispositions tendront rejeter exclure ou limiter toute garantie l gale ou tout autre droit et recours elles seront consid r es comme modifi es dans la mesure n cessaire pour s y conformer Joindre le recu de caisse ce guide pour r f rence ult rieure Cette information pourrait tre demand e s il faut faire r parer l appareil pendant qu il est sous garantie DATE D ACHAT NOM DU MAGASIN 54 Information pour Accessoires DESCRIPTION No PI CE Pile de remplacement pour combin 5 2814 Adapteur de courant c a gris 5 2812 avec socle de chargement Pour commande appelez le distributeur le plus proche pour votre secteur Ontario 905 624 8516 Manitoba 204 783 2088 British Columbia 604 438 8001 Quebec 514 352 9071 Des frais d exp dition et de manutention seront ajout s au montant de la commande Nous sommes tenus par la loi de percevoir la taxe de vente appropri e pour chaque province dans laquelle la marchandise est exp di e Les articles sont assujettis la disponibilit des stocks 99 Index A Affichage des Dossiers 18 Afficheur CID 41 Afficheur D appel en Attente 41 Annuaire 18 Appel a Deux 39 Appel a Trois 39 Appels De R ponse 33 Attente Automatique 33 Av
5. 1 Choose an area near an electrical outlet and a telephone wall jack RJ11C and place your cordless telephone on a level surface such as a desktop or tabletop or you may mount it on the wall 2 P 3 P 4 P 5 ug one end of the telephone line cord into the TEL LINE jack on the back of the base and the other end into a modular jack ug the AC power converter into the electrical outlet and the DC connector into the jack on the back of the base ace the handset in the base cradle The charge in use voicemail indicator turns on verifying the battery is charging low the phone to charge for 16 hours prior to first use If you don t properly charge the phone battery performance is compromised CAUTION To reduce risk of personal injury fire or damage use only the 5 2812 power adaptor listed in the user s guide This power adaptor is intended to be correctly orientated in a vertical or floor mount position 15 GOOG411 GOOG 411 is Google s new 411 service With GOOG 411 you can find local business information completely free directly from your phone With purchasing the GE phone you can access 1 800 G006 411 service at anytime by simply pressing the GOOG 411 button 1 In standby mode or dialing mode press the GOOG 411 button the preset GOOG 411 service number is dialed out immediately GOOG 411 Free 411 by Google shows in the display 2 Speak into the phone and say where you are and
6. L Press the CALLER ID VOLUME or 4 button to scroll to the RINGER TONE sub menu Press mute menu OK button to enter the menu SET RINGER TONE 01 shows in the display 01 is default setting Use the CALLER ID VOLUME w or 4 button to scroll to the desired setting 1 through 20 You will hear a sample of the ringer tone melody you select Press the mute menu OK button to save your selection You will hear a confirmation tone and the selected ringer tone shows in the display NOTE You must have the Ringer Volume set to ON for ring tone to signal an incoming call 23 Ringer Volume From the Handset Setup Menu L Press the CALLER ID VOLUME e or 4 button to scroll to the RINGER VOLUME sub menu Press mute menu OK button to enter the menu SET RINGER LEVEL 5 shows in the display Use the CALLER ID VOLUME or 4 button to scroll to your selection LEVEL 5 is the default setting Press the mute menu OK button to save your selection Vou will hear a confirmation tone and the new volume setting shows in the display NOTE If you turn the ringer OFF the ringer off icon shows in the display VIP Melody This features allows you to assign a specific melody to someone you want to get your attention when the person calls When a VIP melody is assigned and that person calls the unit rings the normal ring for the first ring and then follows with VIP melody ring You may choose from ten different polyphonic melodies and may s
7. lignes directrices en mati re d exposition RF de la FCC lorsque utilis avec la pince ceinture fournie avec ce produit L utilisation d autres accessoires peut ne pas tre conforme avec les lignes directrices de la FCC en mati re d exposition RF Renseignements sur le Produit DECT pect gt Cet appareil est conforme la norme DECT 6 0 qui utilise la ON gamme de fr quences 1 92 1 93 GHz L installation de cet ww appareil est sujette la notification et la coordination avec l UTAM Tout d placement de cet appareil doit tre coordonn avec et approuv par l UTAM Vous pouvez communiquer avec l UTAM au 1 800 429 8826 Table des Matieres RENSEIGNEMENTS MPORTANTS 2 RENSEIGNEMENTS SUR L INTERF RENCE eee eee INFORMATION SUR LE R sEAU T L PHONIQUE EN FACTEUR D QUIVALENCE DE SONNERIE REN 4 LICENSING I E NM COMPATIBILIT AVEC LES PROTH SES AUDITIVES EEN 4 ENONCE SUR L EXPOSITION AU RAYONNEMENT RF oe LA FCC 5 RENSEIGNEMENTS SUR LE PRODUIT DECT iu aei NoD 5 INTRODUCTION 9 AVANT DE COMMENCER 54 9 LISTE DE PI CES sss 9 EXIGENCES DE LA PRISE T L PHONIQUE eene LO INSTALLATION SYST ME DE S CURIT NUM RIQUE eene 11 IMPORTANTES LiGNES DIRECTRICES SUR L INSTALLATION cerne PR SENTATION DU COMBIN PRESENTATION DE LA
8. t r enregistr 4 Choisissez 2NON pour ne pas d senregistrer 5 Sivous choisissez OUI appuyez sur le bouton mute menu OK SE RAPPROCH BASE 30 est affich pendant 2 secondes puis CONFIRMER 1OUI 2NON est affich Appuyez sur le clavier num rique pour choisir LOU ou 2NON ou utilisez le bouton CALLER ID VOLUME w ou 4 pour atteindre 1OUI ou 2NON Si vous choisissez OUI appuyez sur le bouton mute menu OK pour confirmer DESENREGISTRE apparait dans l afficheur suivi d une tonalit de confirmation DESENREGISTRE est ensuite affich pour confirmer que le combin est d senregistr REMARQUE Une fois le d senregistrement termin BESOINS COMBIN ENREGISTREMENT apparait dans l afficheur Vous devez enregistrer le combin avant de l utiliser Desenregistrement Global Si un ou plusieurs des combin s sont perdus vous devez d senregistrer tous les combin s pour assurer le bon fonctionnement du syst me 5 AVERTISSEMENT II n est pas recommand de d senregistrer un combin moins que cela ne soit absolument n cessaire parce qu un combin est d senregistr que les fonctions du combin sont inutilisables tant que le combin n a pas t r enregistr D branchez l alimentation de la base en retirant la fiche de l arri re de celle ci Appuyez sur le bouton find et gardez le enfonc pendant que vous rebranchez l alimentation Continuez appuyer sur le bouton find jusqu ce que le t moin indicateu
9. BASE STATION sete 15 GOOGATI ae 16 PROGRAMMING THE TELEPHONE 17 STANDBY SCREEN sese 17 PROGRAMMING FUNCTIONS 17 PHONE BOOK ecessesssessesssessseessseseceseees 17 REVIEW Recoppe 17 ADD RECORDS sse 18 INSERTING A PAUSE IN THE DIALING SEQUENCE ss 18 EDIT RECORDS 19 DELETE RECORDS ccescessessseesseeseesseees 19 DIALING A NUMBER FROM INTERNAL MEMOR 20 ROOM Momo 20 SET ALARM CLOCK see 21 HANDSET SETUP sss 22 LANGUAGE 22 HANDSET NAME 23 RINGER LONE etes 23 RINGER VOLUME eene 24 VIP MELODY een 24 STORING VIP MELODY 25 CHANGING A STORED VIP MeLopy ECO 26 REVIEWING AND DELETING STORED VIP MELODY RECORD 26 KEV TONE satt 26 SET DAV TIME cseessssssssssseeessssseess 27 Fouen 27 AREA CODE see 28 ToNE PULSE nnns 28 REGISTRATION cette 29 Table of Contents De REGISTRATION ees 30 GLOBAL DE REGISTRATION 31 DEFAULT SETTING sss 31 TELEPHONE OPERATION 32 VISUAL NDICATORS eene 32 NS 32 HANDSET aca uns 32 VMWI VisuAL RINGER INDICATOR ON HANDSET aciei esee 32 SPEAKERPHONE OPERATION 32 MAKING A CALL sen 33 ANSWERING Cas 33 CALL TIMER 33 AUTO Grapp 35 RINGER VOLUME 34 FLASH CALL WAITING mm 34 LAST NUMBER REDIAL 55 EXIT spinat 35 PAGE EN n 55 HANDSE
10. EXTENSION shows in the display S ANNE ROOM MONITOR EXTENSION 5 Usethe touch tone pad to enter the handset number to be monitored NOTE When this phone system is expanded up to 6 handsets by purchase of optional Model 28801 handset with recharge cradle handsets are named HANDSET 1 HANDSET 2 HANDSET 3 and so on respectively 6 Thereceiving handset will turn on the microphone and the originating handset will turn on the speakerphone to monitor sound from the receiving handset NOTE For room monitoring mode to work the originating handset must NOT be on the cradle 20 NOTE While in room monitoring mode the handsets will emit an alert tone approximately every 5 seconds if there is an incoming call You may press the SPEAKER button to quit room monitor and answer the call NOTE While in room monitoring mode the originating handset can be switched to monitor by handset earpiece by pressing the TALK button once Switch back to speakerphone by pressing the SPEAKER button once NOTE Press the END cancel button on the handset to exit room monitor mode Set Alarm Clock 1 2 3 4 Make sure your phone is OFF not in TALK model Press the mute menu OK button to go to the main menu Press CALLER ID VOLUME w or 4 button to scroll to ALARM Press mute menu OK button to enter the submenu ALARM 10N 20FF shows on the display 10 Use the touch tone pad to enter the selection or use the CALLER
11. ID VOLUME v or a button to scroll to 1ON or 20FF If you select ON press the mute menu OK button to confirm and advance Set Alarm Time sub menu Use the number keys to enter the time then use number key to select AM and number key 7 to select PM Press the mute menu OK button to confirm and advance Set Cycle Time sub menu Use the CALLER ID VOLUME w or button to select Once or Daily The default setting is Once Press the mute menu OK button to save your selection You will hear a confirmation tone NOTE If you select Daily the system will follow the current time setting to turn on the alarm 21 Handset Setup 1 2 3 4 Make sure your phone is OFF not in TALK model Press the mute menu OK button to go to the main menu Press CALLER ID VOLUME v or 4 button to scroll to HANDSET SETUP Press mute menu OK button to confirm and you may program the following items Language Handset Name Ringer Tone Ringer Volume VIP Melody Key Tone Set Day Time Equalizer Area Code Tone Pulse Registration Deregistration and Default Setting NOTE During programming you may press the END cancel button at any time to exit the sub menu and return to the menu Language From the Handset Setup Menu 1 22 Press the CALLER ID VOLUME or 4 button to scroll to the SET LANGUAGE sub menu Press mute menu OK button to enter the menu SET LANGUAGE 1ENG 2FRA 3ESP shows in the display Use the touch tone pa
12. Inc product indicates that we are participating in a program to collect and recycle the rechargeable battery or batteries For more information go to the RBRC web site at www rbrc org or call 1 800 8 BATTERY or contact a local recycling center 46 Display Messages The following messages shows the status of the phone provides Caller ID information or helps you set up and use your phone BLOCKED NUMBER CHARGING DELETE ALL DELETE CALL ID DELETE DUPLICATE NUMBER END OF LIST ENTER NAME ENTER TEL NUMBR NEW HANDSET NAME HANDSET NEEDS REGISTRATION Indicates the person is calling from a number which is blocked from transmission Indicates the handset needs to charge for a period of time before it can resume normal function Prompt asking if you want to erase all CID records Prompt asking if you want to erase the CID record showing on the display Prompt asking if you want to erase one of the 50 records stored in the phone s memory Under VIP melody feature if the desired number record was selected in any one of TEN VIP melody records before DUPLICATE NUMBER shows in the display Indicates that there is no additional information in CID memory Prompt telling you to enter a name in one of the 50 memory locations Prompt telling you to enter a telephone number in one of the 50 memory locations Indicates call or calls which have not been reviewed Prompt telling you to enter the us
13. REGISTERING shows in the display REGISTERED shows in the handset display where X is the handset number You may now rename your handset Refer to Step 3 amp 4 of Handset Name Section NOTE IF you are re registering the handset through the handset menu to rename your handset you must go to the Handset Name Section and start from the beginning step 29 De Registration De registration cancels registration During the de registration process keep the handset near the base From the Handset Setup Menu 1 Press the CALLER ID VOLUME or 4 button to scroll to the DEREGISTRATION sub menu Press the mute menu OK button to enter the menu DEREGISTRATION 1YES 2NO shows in the display The default setting is 2NO Use the touch tone pad to select 1 for YES or 2 for NO Or use the CALLER ID VOLUME w or 4 button to scroll to 1YES or 2NO WARNING It is not recommended that a handset be de registered unless absolutely necessary because once a handset is de registered that handset s telephone features cannot be used until the handset is re registered 4 Select 2NO if you do not want to de register 30 If you select 1YES press the mute menu OK button and MOVE NEAR TO BASE displays for 2 seconds then CONFIRM 1YES 2NO appears in the display Press the touch tone pad to select 1VES or 2NO or use the CALLER ID VOLUME e or button to scroll to 1YES or 2NO If you select YES press the mute menu OK button to c
14. VOLUME CALLER ID VOLUME Dm lant T M une s HA jouer o appelam SPEAKER bouton haut END cancel bouton parleur fin annuler GOOG 411 delete intercom conf bouton effacer interphone conf rence service d assistance annuaire gratuit de Google un bouton EN mmm mute menu OK l SS dl redial format bouton sourdine ey S bouton OK iti menu recomposition format tone bouton tonalit pause bouton pause microphone d Pr sentation de la Base do not find amp disturb J ECT charge in use voicemail charge in use voicemail indicateur charge marche do not disturb ee find bouton ne pas bouton rechercher d ranger 14 Installation du T l phone Installation de la Pile du Combin REMARQUE Vous devez brancher la pile du combin avant de l utiliser ATTENTION Pour r duire le risque d incendie ou de blessures utilisez seulement la batterie approuv par Thomson Inc d hydrure de Nickel m tal Ni MH du Model 5 2814 qui est compatible avec cette unit 1 Rep rez la pile et le couvercle du compartiment de la pile qui sont emball s ensemble dans un sac de plastique s par ment du combin 2 Rep rez le compartiment de la pi
15. and tone to page all handsets 4 Tocancel the page press the END cancel delete intercom conf or TALK button on the originating handset or press the END cancel button on the receiving handset Paging from the Base Group Page Use the base only to page all registered handsets at the same time 1 Press the find button on the base All handsets beep for two minutes and PAGING FROM BASE shows on each handset s display 2 To cancel the page press the find button on the base or press the TALK button or the END cancel button on each handset Mute To have a private off line conversation use the MUTE feature The party on the telephone line cannot hear you but you can hear them 1 Press the mute menu OK button The handset display shows MUTE ON 2 Press the mute menu OK button to cancel and return to your phone conversation 56 Receiver Volume Control When the handset is ON in TALK mode you may adjust the receiver volume by pressing the CALLER ID VOLUME or 4 button There are five volume levels to choose from When the maximum or minimum volume level is reached the phone beeps twice VOL 1 is minimum and VOL 5 is maximum Do Not Disturb D N D This feature allows you to turn off all the handset ringer s at once by pressing one button at the base unit even though the ringer volume of handsetls has been preset 1 Inthe standby mode press the do not disturb button on the base 2 The DND indicator will light and D
16. appelants 1 Assurez vous que le t l phone est D SACTIV pas en mode conversation 2 Utilisez le bouton CALLER ID VOLUME w ou 4 pour afficher un dossier d appelant 3 Maintenez le bouton delete intercom conf enfonc jusqu ce que EFFACER TOUT soit affich 4 Appuyez de nouveau sur delete intercom conf supprimer tous les dossiers Vous entendrez une tonalit de confirmation L afficheur indique PAS D APPEL REMARQUE Appuyez sur le bouton END cancel pour revenir au mode en attente sans effacer de dossiers d identification de l appelant 45 Pince Ceinture et Casque en Option Raccordement de la Pince Ceinture 1 Pour fixer la pince ceinture ins rez les extr mit s de la pince ceinture dans les fentes de chaque c t du combin 2 Enclenchez les extr mit s de la pince ceinture en place Raccordement d un Casque Optionnel au Casque Chaque combin peut tre utilis avec un casque d coute en option pour un fonctionnement mains libres 1 Branchezle casque dans la prise casque sur le c t du combin Le r cepteur du combin et le microphone sont d sactiv s quand le casque est branch 2 R glezle casque pour qu il repose confortablement sur le dessus de la t te et sur oreille Placez le microphone environ deux ou trois pouces de la bouche 3 Appuyez sur le bouton TALK pour r pondre ou faire un appel si vous utilisez le casque 4 Pourretourner au fonctionnement normal d branchez le casque de
17. d sire d connecter son t l phone de facon permanente Facteur D quivalence de Sonnerie REN L tiquette sous cet appareil indique notamment le facteur d quivalence de sonnerie de l appareil Le REN permet de d terminer le nombre d appareils que vous pouvez raccorder votre ligne t l phonique et qui sonneront quand votre num ro de t l phone est compos Dans la plupart des r gions mais pas toutes la somme des REN de tous les appareils raccord s une ligne ne doit pas d passer 5 Pour conna tre le nombre d appareils que vous pouvez raccorder votre ligne compte tenu du REN communiquez avec votre compagnie de t l phone REN facteur d quivalence de sonnerie SE TROUVE LA BASE DE L APPAREIL Licensing Sous license du brevet US 6 427 009 Compatibilit avec les Proth ses Auditives Ce t l phone est conforme aux normes FCC Industrie Canada en mati re de compatibilit avec les proth ses auditives nonce sur L exposition au Rayonnement RF de la FCC Cet quipement est conforme aux limites d exposition au rayonnement RF de la FCC tablies pour un environnement non contr l Cet quipement doit tre install et utilis en maintenant une distance minimale de 20 centim tres entre le radiateur et votre corps Cet metteur ne doit pas tre plac ou utilis avec une autre antenne ou un autre metteur Pour l utilisation sur soi ce t l phone a t mis l essai et est conforme aux
18. dans le syst me e A signal d appel en attente dans le r cepteur du combin appuyez sur le bouton TALK ou SPEAKER pour mettre l appel actuel em garde et r pondre l appel en attente Appuyez sur le bouton TALK ou SPEAKER encore pour retourner l appel original Reception de Dossiers D appelants Quand vous recevez un appel l information de l appelant est transmise entre la premi re et la deuxi me sonneries L information d appelant est affich e pendant que le t l phone sonne vous donnant ainsi la possibilit de consulter l information et de d cider de prendre ou non l appel 41 Memorisation de Dossiers D appelants Dans la Memoire de L afficheur Si vous tes absent ou ne pouvez r pondre la m moire de l afficheur m morise les donn es des 40 plus r cents appels recus pour vous indiquer qui a appel pendant que vous n tiez pas disponible la r ception du 41e appel le plus ancien dossier d appelant 1er appel est automatiquement supprim Vous pouvez consulter l information m moris e en tout temps Les appels recus depuis la derni re consultation sont indiqu s comme tant NOUVEAU dans l afficheur Les appels qui n ont pas t cout s pr c demment mais qui proviennent du m me num ro plus d une fois affichent REPT l cran Consultation des Dossiers D appelants mesure que les appels sont re us et m moris s l afficheur est mis jour pour vous indiquer le nombre d appels recus Pour
19. faire d filer les dossiers d appelants 1 Assurez vous que le t l phone est D SACTIV pas en mode TALK 2 Appuyez sur le bouton CALLER ID VOLUME pour consulter le plus r cent dossier d appelant 3 Appuyez sur le bouton CALLER ID VOLUME 4 pour consulter le plus ancien dossier d appelant 42 Composition d un Num ro D appelant 1 Assurez vous que le t l phone est D SACTIV pas en mode TALK 2 Utilisez le bouton CALLER ID VOLUME ou 4 pour afficher le dossier d sir 3 Appuyez sur TALK ou SPEAKER Le num ro est compos automatiquement REMARQUE Selon a le format du num ro de t l phone de l appelant sa r ception et b si vous avez d j programm votre indicatif r gional dans le menu de programmation vous devrez peut tre r gler le format du num ro de t l phone m moris de l appelant avant de faire l appel appuyez sur le bouton redial format pour r gler le num ro et essayez de nouveau Formats disponibles Nombre de chiffres Explication Exemple Onze chiffres code d interurbain 1 1 317 888 8888 indicatif 3 chiffres num ro de t l phone 7 chiffres Dix chiffres indicatif 3 chiffres 317 888 8888 num ro de t l phone 7 chiffres Sept chiffres num ro de t l phone 7 chiffres 888 8888 45 Memorisation des Dossiers D appelants dans la Memoire Interne Vous pouvez aussi m moriser l information d appelant dans la m moire interne du t l phone
20. la base pendant l enregistrement Appuyez et gardez enfonc le bouton find sur la base l indicateur charge in use vocaux clignote Appuyez sur le bouton mute menu OK du combin Le message ENREGISTREMENT s affiche Le message ENREGISTRE s affiche X correspond au num ro du combin Vous pouvez maintenant renommer le combin Voir les tapes 3 et 4 de la partie sur le changement de nom du combin REMARQUE Si vous enregistrez nouveau le combin par le menu de celui ci vous devez aller la partie concernant le changement de nom du combin et entreprendre la proc dure depuis le tout d but afin de renommer le combin 29 Desenregistrement Le d senregistrement annule l enregistrement Pendant le processus de d senregistrement gardez le combin pr s de la base Du Menu D installation de Combin 1 Si n cessaire appuyez sur le bouton CALLER ID VOLUME Le ou 4 pour afficher le menu DESENREGISTREM Appuyez sur le bouton mute menu OK pour ouvrir ce menu Le message DESENREGISTREM 1OUI 2NON s affiche Le param tre par d faut est 2NON Utilisez le clavier num rique pour choisir 1 pour OUI ou 2 pour NON Ou utilisez le bouton CALLER ID VOLUME ou a our atteindre 1OUI ou 2NON AVERTISSEMENT Il n est pas recommand de d senregistrer un combin moins que cela ne soit absolument n cessaire parce qu un combin est d senregistr que les fonctions du combin sont inutilisables tant que le combin n a pas
21. le menu PHONEBOOK Utilisez sur le bouton CALLER ID VOLUME w ou 4 pour afficher VIEW RECORDS Appuyez sur le bou on mute menu OK pour confirmer Utilisez sur le bouton CALLER ID VOLUME v ou 4 ou entrez une lettre pour vous d placer jusqu au num ro d sir Appuyez sur les boutons TALK ou SPEAKER le num ro sera compos automatiquement Ecoute d Distance utilisable SEULEMENT avec des Combin s Suppl mentaires 1 Assurez vous que le t l phone est D SACTIV pas en mode conversation 2 Appuyez sur le bouton mute menu OK pour aller au menu principal 3 Appuyez sur le bouton CALLER ID VOLUME v ou 4 pour afficher ROOM MONITOR Ecoute Distance 4 Appuyez sur le bouton mute menu OK pour ouvrir le menu ROOM MONITOR coute Distance le message ROOM MONITOR EXTENSION coute Distance s affiche ROOM MONITOR EXTENSION Utilisez le clavier pour entrer le num ro du combin qui sera sur coute REMARQUE Lorsque que ce syst me t l phonique est augment jusqu 6 combin s avec l achat du combin et socle de recharge Mod le 28801 en option les combin s sont nomm s COMBIN 1 COMBIN 2 COMBIN 3 et ainsi de suite respectivement 21 6 Lecombin sur coute distance mettra le microphone en marche et le combin d coute pr s de vous mettra l couteur en fonction pour entendre le son du combin sur coute REMARQUE Pour que la fonction d co
22. to confirm NOTE If the desired number record was previously stored in any one of the ten VIP melody records DUPLICATE NUMBER shows in the display 25 Changing a Stored VIP Melody Record Use the Storing VIP Melody procedure to change the number of a selected record and replace the old phone number with new phone number When REPLACE VIP shows in the display you must press mute menu OK button on the handset to confirm replacement Reviewing And Deleting Stored VIP Melody Record From the Handset Setup Menu 1 2 Press the mute menu OK button to enter to VIP MELODY menu Use the CALLER ID VOLUME or 4 button to scroll to the desired VIP Melody Record If you want to delete the information press the delete intercom conf button on the handset while the entry displays The display show DELETE VIP Press delete intercom conf again to confirm You will hear a confirmation tone and VIP DELETED shows in the display Key Tone From the Handset Setup Menu 1 26 Press the CALLER ID VOLUME w or 4 button to scroll to the KEY TONE sub menu Press mute menu OK button to enter the menu SET KEY TONE 10N 2 OFF shows in the display Use the touch tone pad on the handset to select 1 or 2 or use the CALLER ID VOLUME w or 4 button to scroll to your selection 1ON is the default setting Press the mute menu OK button to confirm and the key tone setting shows in the display Set Day Time From the Handset Setup
23. want to switch to the speakerphone press the SPEAKER button press END cancel to end conversation If you are using the speakerphone and want to switch to the handset press the TALK button press END cancel again to end conversation 32 Making a Call 1 Press the TALK or SPEAKER button Dial the desired number OR Dial the number first then press the TALK or SPEAKER button OR Press the CALLER ID VOLUME or 4 button to select the desired record then press the TALK or SPEAKER button 2 When finished press the END cancel button to hang up NOTE You may enter up to 25 pre dial digits NOTE If you want to delete the pre dial number you entered press the delete intercom conf button until all of the digits are erased Answering Calls 1 When the phone rings press the SPEAKER button on the handset OR Pick up the handset and press the TALK button 2 When finished press END cancel to hang up NOTE Adjust the handset volume by pressing the CALLER ID VOLUME or button during a call Call Timer After you press the TALK or SPEAKER button on the handset the built in call timer shows on the display and counts the length of time of the call in minutes and seconds Auto Standby If you place the handset in the cradle while the handset is off the hook during a call the call is automatically disconnected 33 Ringer Volume Shortcut There are two ways to set the ringer volume One is the traditional way as d
24. y aura CINQ combin s suppl mentaires deux socles de chargement deux pinces pour ceinture deux piles et deux couvercles de plus que ce qui est illustr plus haut Exigences de la Prise T l phonique Pour utiliser ce t l phone vous devez disposer dans Placa de pared la maison d une prise t l phonique modulaire de type RJ11C CA11A qui peut ressembler celle illustr e ici Si aucune prise modulaire n est install e en faire installer une par la compagnie de t l phone Prise de ligne t l phonique modulaire 10 Installation Syst me de S curit Num rique Lorsque vous d posez le combin sur la base l appareil v rifie son code de s curit qui emp che les fausses sonneries d autres t l phones sans cordon NOTE SUR L INSTALLATION Certains t l phones sans fil fonctionnent des fr quences qui peuvent causer ou subir de l interf rence de t l viseurs fours micro ondes et magn toscopes situ s proximit Pour r duire ou viter cette interf rence la base de votre t l phone sans fil ne devrait pas tre plac e pr s ou sur un t l viseur un four micro ondes ou un magn toscope Si l interf rence persiste d placez le t l phone sans fil une plus grande distance de ces appareils D autres appareils de communications peuvent aussi utiliser la fr quence de 1 9 GHz pour communiquer et si ces appareils ne sont pas install s correctement ils peuvent interagir entre
25. 9071 A shipping and handling fee will be charged upon ordering It is required by law to collect appropriate sales tax for each individual state country and locality to which the merchandise is being sent Items are subject to availability 54 Index A Accessory Information Add Records Advanced Intercom Features Answering Calls Area Code Auto Standby B Base Base Layout Base Station Battery Safety Precautions Battery Solutions Before You Begin Belt Clip and Optional Headset 54 18 39 25 28 35 32 13 15 46 51 C Call Timer 43 Call Waiting CallerID 41 Caller ID CID 41 Caller ID Solutions 51 Causes of Poor Reception 52 Changing a Stored VIP Melody Record 26 Changing the Battery 46 Connecting an Optional Headset to the Handset 45 Connecting the Belt Clip 45 58 Index D Default Setting 31 Delete Records 19 Deleting a CID Record 44 Deleting All CID Records 45 De Registration 30 Dialing a CID Number 43 Dialing a Number from Internal Memory 20 Digital Security System 10 Display Messages 47 Do Not Disturb 37 E Edit Records 19 Equalizer 27 Exit 35 F FCC RF Radiation Exposure Statement 4 Flash Call Waiting 34 56 G General Product Care 52 Global De registration 31 GOOGA11 16 H Handset 32 Handset Layout 12 Handset Name 23 Handset Setup 22 Handset Sound Signals 49 Handset to Handset Paging 36 Hearing Aid Compatibility HAC 4 I
26. Appuyez sur le bouton mute menu OK pour confirmer votre s lection et avancer le sous menu REGLER HEURE 27 5 Utilisez des touches num riques pour entrer l heure et la minute courantes et utilisez touche num rique 2 pour s lectionner AM et touche num rique 7 pour s lectionner PM 6 Appuyez sur le bouton mute menu OK pour enregistrer votre s lection Vous entendrez une tonalit de confirmation et le temps courant s affiche Egalisateur Cette fonction vous permet de r gler la qualit du son Du Menu D installation de Combin 1 Appuyez sur le bouton CALLER ID VOLUME v ou 4 pour afficher Equalizer 2 Appuyez sur le bouton mute menu OK pour aller au menu 3 Utilisez le bouton CALLER ID VOLUME ou 4 pour afficher votre s lection Le param tre par d faut est Natural 4 Appuyez sur le bouton mute menu OK pour enregistrer votre s lection Vous entendrez une tonalit de confirmation Code R gional Du Menu D installation de Combin 1 Appuyez sur le bouton CALLER ID VOLUME Le ou 4 pour afficher le sous menu INDICATIF REG 2 Appuyez sur le bouton mute menu OK pour ouvrir ce menu Le message REGLER IND REGI s affiche Le param tre par d faut est Utilisez le clavier pour entrer le code r gional de 3 chiffres 4 Appuyez sur le bouton mute menu OK pour confirmer Vous entendrez une tonalit de confirmation et le nouveau code r gional s affichera REMARQUE Pour revenir au r glage par d fau
27. BASE goe lt INSTALLATION DU T L PHONE 15 INSTALLATION DE LA PiLE DU COMBIN 15 POSTE DE BASE n 16 GOOGALL uat 17 PROGRAMMATION DU TELEPHONE 18 CRAN D ATTENTE eee 18 FONCTIONS DE PROGRAMMATION 18 ANNUAIRE ces 18 AFFICHAGE DES DOSSIERS 18 INsERTION D UNE PAUSE DANS LA SEQUENCE DE COMPOSITION 19 EDITION DES DOSSIERS 20 SUPPRESSION DE DOSSIERS 20 COMPOSITION D UN NUM RO DE LA M MOIRE INTERNE 21 ECOUTE DstawcE 21 R GLAGE DU R VEIL eenvrvesevsvrsvrservsenn 22 PARAM TRES DU COMBIN 23 LANGUE NOM DU COMBIN 24 TONALITE DE LA SONNERIE 24 VOLUME DE LA SONNERIE 25 M LODIE VIP voces 25 M MORISATION DES M LODIES VIP ee 26 MODIFICATION D UN DOSSIER ENREGISTR DE M LODIE VIP 26 RAPPEL ET SUPPRESSION D UN DOSSIER ENREGISTR DE M LODIE R GLAGE DE LA DATE DE L HEURE EGALISATEUR ect CODE Roos ToNautr IMPULSION 29 Table des Matieres ENREGISTREMENT eene 29 DESENREGISTREMENT 30 DESENREGISTREMENT GLOBAL 51 REGLAGE PAR DEFAUT 31 FONCTIONNEMENT DU TELEPHONE 32 T MOINS VISUELS 32 s c 32 COMBIN rs 32 INDICATEUR DE MESSAGES VOCAUX Re us IMVR VisueL DE SONNERIE SUR LE COMBIN 32 FONCTIONNEMENT DU HAUT PARLEUR DU COMBIN cs 32 FAI
28. C SHOCK DO POINT WITHIN THE WARNING TO HEAD WITHIN THE NOT REMOVE COVER OR TRIANGLE IS A PREVENT FIRE OR TRIANGLE IS A BACK NO USER Bei ARIS e WARNING SIGN ERVICEABLE PARTS INSIDE ELECTRICAL SHOCK ALERTING you Or REFER SERVICING TO IMPORTANT HAZARD DO NOT EE EEN SERVICE PARIS E VOLTAGE INSIDE PERSONNEL EXPOSE THIS THE PRODUCT THE PRODUCT PRODUCT TO RAIN OR MOISTURE SEE MARKING ON BOTTOM BACK OF PRODUCT Introduction CAUTION When using telephone equipment there are basic A safety instructions that should always be followed Refer to the IMPORTANT SAFETY INSTRUCTIONS provided with this product and save them for future reference IMPORTANT Because cordless phones operate on electricity you should have at least one phone in your home that isn t cordless in case the power in your home goes out Before You Begin Parts Checklist for model 28811 Make sure your package includes the items shown here AC power Handset adaptor battery pack Handset Telephone line Battery Belt cli Wall mount compartment bracket ge cover For Model 28811xx2 there will be ONE additional handset charge cradle belt clip battery pack and cover than shown above NOTE If a speaker box is included in your package it replaces one set of a handset belt clip battery pack and cover For Model 28811xx3 there will be TWO additional handsets c
29. D installation de Combin 1 2 Appuyez sur le bouton mute menu OK pour ouvrir le menu MELODIE VIP Appuyez sur le bouton CALLER ID VOLUME w ou 4 pour afficher le dossier M lodie VIP d sir Si vous voulez supprimer l information appuyez sur le bouton delete intercom conf du combin quand l information est affich e Le message EFFACER VIP apparait Appuyez de nouveau sur le bouton delete intercom conf pour confirmer Vous entendrez une tonalit de confirmation et le message VIP EFFACE s affichera Tonalit du Clavier Du Menu D installation de Combin 1 Appuyez sur le bouton CALLER ID VOLUME ou 4 pour afficher le sous menu TONALIT TOUCHE Appuyez sur le bouton mute menu OK pour ouvrir ce menu Le message REGL TON TOUCHE 1MA 2ARRET s affiche Utilisez les touches du combin pour s lectionner 1 ou 2 ou utilisez le bouton CALLER ID VOLUME ou pour afficher votre s lection Le param tre par d faut est 1MA Appuyez sur le bouton mute menu OK pour confirmer et le param tre de tonalit du clavier s affiche R glage de la Date de l heure Du Menu D installation de Combin 1 Appuyez sur le bouton CALLER ID VOLUME v ou 4 pour afficher le sous menu REG JOUR HEURE Appuyez sur le bouton mute menu OK pour aller au menu SET DAY MONDAY s affiche Le param tre par d faut est MONDAY Appuyez sur le bouton CALLER ID VOLUME w ou 4 pour s lectionner entre MONDAY et SUNDAY
30. ID service from your local telephone company to receive CID information Battery Solutions If you experience any of the following problems even after recharging the battery you may need to replace the battery pack e Short talk time e Poor sound quality e Limited range e Charge indicator fails to turn on sl Causes of Poor Reception Aluminum siding Foil backing on insulation Heating ducts and other metal construction that can shield radio signals You re too close to appliances such as microwaves stoves computers etc Atmospheric conditions such as strong storms Base is installed in the basement or lower floor of the house Base is plugged into AC outlet with other electronic devices Baby monitor is using the same frequency Handset battery is low You re out of range of the base General Product Care To keep your unit working and looking good follow these guidelines 52 Avoid dropping the handset as well as other rough treatment to the phone Clean the phone with a soft cloth Never use strong cleaning agents paint thinner abrasive powder alcohol or other chemical products to clean the unit Doing so will damage the finish Retain the original packaging in case you need to ship the phone at a later date Periodically clean the charge contacts on the handset and base with a clean pencil eraser Warranty Thomson Digital Technologies Ltd warrants to the purchaser or gift recipient that if a
31. LK et SPEAKER clignotent lorsque vous recevez un appel externe t demeurent allum s pendant un appel Le clavier et l indicateur CID s allument lors d un appel entrant Indicateur de Messages Vocaux Re us IMVR Visuel de Sonnerie sur le combin IMPORTANT Vous devez vous abonner au service d affichage de message en attente de votre compagnie de t l phone pour utiliser L indicateur de Messages Vocaux Re us IMVR de cet appareil L indicateur de Messages Vocaux Re us IMVR clignote lorsque vous recevez un nouveau message de la compagnie de t l phone II sert aussi la fonction d indicateur visuel de sonnerie II clignote lors d un appel entrant Fonctionnement du Haut Parleur du Combin REMARQUE Si vous utilisez le haut parleur demeurez pr s du combin pour que la personne avec qui vous parlez puisse vous entendre Si vous utilisez le combin et que vous voulez passer en mode haut parleur appuyez sur le bouton SPEAKER Pour terminer l appel appuyez de nouveau sur END cancel Si vous tes en mode haut parleur et que vous voulez passer en mode combin appuyez sur le bouton TALK Pour terminer l appel appuyez de nouveau sur END cancel 52 Faire un Appel 1 Appuyez sur le bouton TALK ou SPEAKER Composez le num ro d sir O Composez le num ro d abord puis appuyez sur le bouton TALK ou SPEAKER O Appuyez sur le bouton CALLER ID VOLUME w ou 4 pour s lectionner le dossier d sir puis appuyez s
32. Menu 1 Press the CALLER ID VOLUME or a button to scroll to the SET DAY TIME sub menu 2 Press mute menu OK button to enter the menu SET DAY MONDAY shows in the display MONDAY is default setting 3 Press the CALLER ID VOLUME or 4 button to select from MONDAY to SUNDAY 4 Press mute menu OK button to confirm your selection and advance SET TIME sub menu 5 Use the number keys to enter the current hour and minute then use number key 2 to select AM and number key 7 to select PM 6 Press the mute menu OK button to save your selection You will hear a confirmation tone and the current time shows in the display Equalizer This feature lets you to adjust the audio quality From the Handset Setup Menu 1 2 3 Press the CALLER ID VOLUME or 4 button to scroll to Equalizer Press the mute menu OK button to enter the menu Use the CALLER ID VOLUME or a button to scroll to desired selection The default is Natural Press the mute menu OK button to save your selection Vou will hear a confirmation tone 27 Area Code From the Handset Setup Menu 1 Press the CALLER ID VOLUME or 4 button to scroll to the AREA CODE sub menu Press mute menu OK button to enter the menu SET AREA CODE Shows in the display Use the touch tone pad to enter your 3 digit area code Press the mute menu OK button to confirm You will hear a confirmation tone and the new area code shows in the display NOTE To res
33. Model 28811 Series DECT 6 0 Cordless Handset Speakerphone Answering System User s Guide Your new GE telephone system is EXPANDABLE up to a total of 6 handsets by purchase of optional Model 28801 handset with charge cradle Important Information NOTICE This product meets the applicable Industry Canada technical specifications Operation is subject to the following two conditions 1 This device may not cause interference and 2 This device must accept any interference including interference that may cause undesired operation of the device The equipment must be installed using an acceptable method of connection The customer should be aware that compliance with the above conditions may not prevent degradation of service in some situations Repairs to certified equipment should be made by an authorized Canadian maintenance facility designated by the supplier Any repairs or alterations made by the user to this equipment or equipment malfunctions may give the telecommunications company cause to request the user to disconnect the equipment Users should ensure for their own protection that the electrical ground connections of the power utility telephone lines and internal metallic water pipe systems if present are connected together This precaution may be particularly important in rural areas CAUTION Users should not attempt to make such connections themselves but should contact the appropriate electric inspection authorit
34. Ne jamais utiliser un nettoyeur puissant ou une poudre abrasive afin de ne pas endommager le fini Conserver l emballage original pour utilisation ult rieure Causes de Mauvaise R ception Parements en aluminium Endos m tallique d isolation Conduites de chauffage et autre construction m tallique pouvant bloquer les signaux radio Trop pr s d appareils comme un four micro ondes une cuisini re un ordinateur etc Conditions atmosph riques comme un orage lectrique Base install e au sous sol ou l tage inf rieur de la maison Base branch e dans une prise c a avec d autres appareils lectroniques Un couteur de surveillance de b b utilise la m me fr quence Pile de combin faible Hors de la port e de la base 55 Garantie Thomson Digital Technologies Ltd garantit l acheteur de cet appareil ou la personne qui le recevrait en cadeau que si cet appareil pr sente un d faut de fabrication pendant l ann e suivant la date d achat il sera remplac sans frais Les frais de transport de retour sont pay s Cette garantie ne couvre pas les dommages attribuables aux accidents une mauvaise utilisation ni des piles qui fuient Si cet appareil ne fonctionne pas convenablement pendant qu il est sous garantie 1 Le retourner au marchand vendeur avec la preuve d achat pour tre remplac OU 2 Appelez 1 800 522 0338 l anglais ou 1 800 522 0445 Francais pour des instructions au sujet d o
35. O NOT DISTURB shows in each handset display 3 Tocancel press the do not disturb button again NOTE You can press the do not disturb button and activate the function immediately even when there is incoming call ringing in or during call screening after the call is taken by the answerer 37 Intercom Operation applicable only with additional handsets The intercom feature allows you to have a conversation with another registered handset without tying up the telephone line allowing you to still receive incoming calls Making an Intercom Call 1 Make sure the handset is OFF not in TALK model 2 Press the delete intercom conf button on the handset 3 Usethe touch tone pad to select the handset you want to page NOTE To cancel page press the delete intercom conf button again or the END cancel button on the sending handset 4 Wait for the person at the receiving handset to press the delete intercom conf button NOTE If the receiving handset does not answer within two minutes the intercom call is automatically canceled The originating handset displays NO ANSWER 5 When finished press the END cancel button or delete intercom conf button on either handset to deactivate the intercom NOTE The system is expandable up to 6 handsets by purchase of optional Model 28801 handset with recharge cradle When 4 handsets are registered the system can handle 2 separate intercom operations at once for example 1st handset intercoms with 2
36. R ID VOLUME or 4 button to scroll to PHONEBOOK Press mute menu OK button to enter PHONEBOOK menu Use the CALLER ID VOLUME or 4 button to scroll to DELETE RECORDS Press the mute menu OK button to confirm display will show the records Use the CALLER ID VOLUME or 4 button or key in alphabet to move to desired record press the delete intercom conf button DELETE shows on the display Press the delete intercom conf button or mute menu OK button again to confirm NOTE If you don t want to change or delete a record simply press the END cancel button or wait for one minute to exit automatically 19 Dialing a Number from Internal Memory Make sure the phone is OFF not in TALK model Press the mute menu OK button to go to the main menu Press CALLER ID VOLUME or 4 button to scroll to PHONEBOOK Press mute menu OK button to enter PHONEBOOK menu Use the CALLER ID VOLUME or 4 button to scroll to VIEW RECORDS Press the mute menu OK button to confirm Use the CALLER ID VOLUME w or 4 button or key in alphabet to move to the desired number 8 Pressthe TALK or SPEAKER buttons the number dials automatically Room Monitor applicable only with additional handsets 1 Make sure your phone is OFF not in TALK mode 2 Pressthe mute menu OK button to go to the main menu 3 Press CALLER ID VOLUME or 4 button to scroll to ROOM MONITOR 4 Press mute menu OK button to enter ROOM MONITOR menu ROOM MONITOR
37. RE UN APPEL 33 Appels DE R PONSE 33 MINUTERIE D APPEL 33 ATTENTE AUTOMATIQUE vever 33 VOLUME DE LA SONNERIE 34 FLASH APPEL EN ATTENTE 34 RECOMPOSITION DU DERNIER NUMERO S QUITTER RECHERCHE RECHERCHE DE COMBINE COMBINE se 35 RECHERCHE DE TOUS LES COMBIN S D UN COMBIN eee 36 RECHERCHE A PARTIR DE LA Base RECHERCHE DE GROUPE 36 SILENCIEUX cette 36 COMMANDE DE VOLUME DU RECEPTEUR se 36 NE pas D RANGER DND 37 FONCTIONNEMENT DE L INTERPHONE 37 FAIRE UN APPEL D INTERPHONE 37 RECEPTION D UN APPEL D INTERPHONE eene 38 FONCTIONS AVANCEES DE L INTERPHONE eee 38 RECEVOIR UN APPEL PENDANT UN APPEL D INTERPHONE sorrvvrovevses 38 UTILISATION DE L INTERPHONE AVEC LES APPELS EXTERIEURS 38 APPEL A DEUX sss 39 APPEL A TROIS 39 Renvol D APPELS EXTERIEURS A D AUTRES COMBINES 40 AFFICHEUR CID 41 FFICHEUR D APPEL EN ATTENTE 41 RECEPTION DE Dossiers D APPELANTS roresrovsvsvevsevsersveserssrs 41 MEMORISATION DE DOSSIERS D APPELANTS entes 42 CONSULTATION DES DOSSIERS D APPELANTS eene 42 COMPOSITION D UN NUM RO D APPELANT2 citet 45 MEMORISATION DES DOSSIERS D APPELANTS DANS LA MEMOIRE INTERNE cernentes 44 SUPPRESSION DU DOSSIER D APPELANT eec 44 SUPPRESSION DE TOUS LES DOSSIERS D APPELANTS rers 45 Tab
38. T TO HANDSET PAGING 36 PAGING ALL HANDSETS FROM A ee E 36 PAGING FROM THE BasE GROUP PAGE nn is 36 Mur 36 RECEIVER VOLUME CONTROL 37 Do Nor DISTURB sss 37 INTERCOM OPERATION 38 MAKING AN INTERCOM Cat 38 RECEIVING AN INTERCOM CALL 38 ADVANCED INTERCOM FEATURES 39 RECEIVING AN INCOMING CALL DURING AN INTERCOM CALL 59 UsiNG INTERCOM WITH EXTERNAL TELEPHONE CALLS serrrrrvsvrvsrvvnvnn 39 TWO WAY CALLING 39 THREE WAY CALLING 40 TRANSFERRING EXTERNAL CALLS TO OTHER HANDSETS scesseesseeseeesees 40 Cauter ID CID 41 CALL WAITING CALLER ID 41 RECEIVING CID RECORDS 41 SroniNG CID Recoros IN CID MEMORY mnorovvvosvvrevevressersevsvssssernr 42 REVIEWING CID Recoppe 42 DIALING A CID NUMBER 45 STORING CID RECORDS IN INTERNAL MEMORY 44 DELETING A CID RECORD 44 DEeLETING ALL CID RecORDS 45 Table of Contents Bett CuiP AND OPTIONAL HEADSET 45 CONNECTING THE BELT Cup 45 CONNECTING AN OPTIONAL HEADSET TO THE Haye 45 CHANGING THE BATTERY 46 BATTERY SAFETY PRECAUTIONS 46 DISPLAY MESSAGES HANDSET SOUND SIGNALS TROUBLESHOOTING GUIDE TELEPHONE SOLUTIONS THE LIGHTNING CAUTION TO REDUCE THE THE EXCLAMATION FLASH AND ARROW RISK OF ELECTRI
39. act re la fois 4 Appuyez sur le bouton mute menu OK pour m moriser le nom Vous entendrez une tonalit de confirmation et le nom du combin s affichera Tonalit de la Sonnerie Vous avez le choix entre dix tonalit s de sonnerie et entre dix m lodies diff rentes Du Menu D installation de Combin 1 Appuyez sur le bouton CALLER ID VOLUME w ou 4 pour afficher le sous menu TON SONNERIE 2 Appuyez sur le bouton mute menu OK pour ouvrir ce menu Le message REGLER TON SONN 01 s affiche Le param tre par d faut est 01 3 Utilisez le bouton CALLER ID VOLUME ou 4 pour afficher le r glage d sir de 1 20 Vous entendrez un extrait de la tonalit ou de la m lodie s lectionn e 4 Appuyez sur le bouton mute menu OK pour enregistrer votre s lection Vous entendrez une tonalit de confirmation et la tonalit de sonnerie s lectionn e s affichera 24 REMARQUE Vous devez avoir le volume de sonnerie r gl ON pour que la tonalit d anneau signale un appel d arriv e Volume de la Sonnerie Du Menu D installation de Combin 1 Appuyez sur le bouton CALLER ID VOLUME ou 4 pour afficher le sous menu VOLUME SONNERIE 2 Appuyez sur le bouton mute menu OK pour ouvrir ce menu Le message REGLAT SONNERIE LEVEL 5 s affiche 3 Utilisez le bouton CALLER ID VOLUME ou 4 pour afficher votre s lection Le param tre par d faut est LEVEL 5 4 Appuyez sur le bouton mute menu OK pour enregistrer votr
40. ain menu Press CALLER ID VOLUME or 4 button to scroll to PHONEBOOK Press mute menu OK button to enter PHONEBOOK menu Use the CALLER ID VOLUME v or 4 button to scroll to VIEW RECORDS Press the mute menu OK button to confirm all records are shown in alphabetical order 7 Press the CALLER ID VOLUME or 4 button or key in alphabet to view the records Sit Ze UN nm rp 17 Add Records Make sure the phone is OFF not in TALK model Press the mute menu OK button to go to the main menu Press CALLER ID VOLUME or 4 button to scroll to PHONEBOOK Press mute menu OK button to enter PHONEBOOK menu Use the CALLER ID VOLUME or 4 button to scroll to ADD RECORDS Press the mute menu OK button to confirm ENTER NAME shows on the display Use the touch tone pad to enter a name up to 15 characters More than one letter is stored in each of the number keys For example to enter Bill Smith press the 2 key twice for the letter B Press the 4 key 3 times for the letter I Press the 5 key 3 times for the letter L Press the 5 key 3 times for the second letter L and press the 1 key to insert a space between the first and last name Press the 7 key 4 times for the letter S press the 6 key once for the letter M press the 4 key 3 times for the letter press the 8 key for the letter T press the 4 key twice for the letter H NOTE If you make a mistake press the delete intercom conf button to backspace and erase the
41. andset is in speakerphone mode Indicates incoming call is from an area not serviced by CID or the CID information was not sent Handset Sound Signals Signal Meaning A long warbling tone Signals an incoming call with ringer on Three short beeps Page signal several times One beep every 7 seconds Low battery warning 49 Troubleshooting Guide Telephone Solutions No dial tone e Check or repeat installation steps Make sure the base power cord is connected to a working electrical outlet Make sure the telephone line cord is connected to the base and the wall jack e Connect another phone to the same jack If it doesn t work the problem might be your wiring or local service The handset may be out of range of the base Move closer to the base e Make sure the battery is properly charged for 16 hours e Make sure the battery pack in the handset is properly installed e The handset should beep when you press the TALK button and the charge indicator on the base should be lit when the handset rests in the cradle If not the battery may need to be charged e Place handset in charge cradle for at least 20 seconds to reset the unit Handset does not ring e Make sure the handset ringer software switch is set to on The handset may be out of range of the base Move closer to the base e You may have too many extension phones on your line Try unplugging some extensions e Check for a dial tone You experience s
42. ant de Commencer 9 B Base 32 C Causes de Mauvaise R ception 53 Code R gional 28 Combin 32 Commande de Volume du Recepteur 36 Compatibilit avec les Proth ses Auditives 4 Composition d un Num ro D appelant 43 Composition d un Num ro de la M moire Interne 21 Consultation des Dossiers D appelants 42 56 D Desenregistrement 30 Desenregistrement Global 31 E coute Distance 21 cran D attente 18 dition des Dossiers 20 galisateur 28 nonce sur L exposition au Rayonnement RF de la FCC 5 Enregistrement 29 Exigences de la Prise T l phonique 10 F Facteur D quivalence de Sonnerie REN 4 Faire un Appel 33 Faire un Appel D interphone 37 Flash Appel en Attente 34 Fonctionnement de L interphone 37 Fonctionnement du Haut Parleur du Combin 32 Fonctionnement du Telephone 32 Fonctions Avancees de L interphone 38 Fonctions de Programmation 18 Index G Garantie 54 GOOG411 17 Guide de Depannage 50 Importantes Lignes Directrices sur L installation 12 Indicateur de Messages Vocaux Re us IMVR Visuel de Sonnerie sur le combin 32 Information pour Accessoires 55 Information sur le R seau T l phonique 3 Insertion D une Pause dans la Sequence de Composition 19 Installation 11 Installation de la Pile du Combin 15 Installation du T l phone 15 Introduction 9 L Langue Licensing Liste de Pi ces M M lodie VIP Memorisation de Dossiers D appelants Memorisation des Do
43. areil Thomson signale que nous participons un programme de collecte et de recyclage des piles rechargeables Pour plus de renseignements allez sur le site www rbrc org cellarecycler appelez au 1 800 8 BATTERY ou contactez votre centre de recyclage 47 Messages Affich s Les messages suivants indiquent l tat du t l phone ou vous aident programmer et utiliser le t l phone NUMERO BLOQUE CHARGING EFFACER TOUT EFFACER DOSSIER EFFACER DUPLICATION DE NUMERO FIN DE LISTE ENTRER NOM ENTRER NUMTEL NOUVEAU COMBINE NOM BESOINS COMBIN ENREGISTREMENT 48 La transmission du nom et du num ro de l appelant est bloqu e Indique que le combin doit facturer une p riode avant qu il puisse reprendre la fonction normale Demande si vous so d appelants Demande si vous so d appelant affich Demande si vous so uhai uhai uhaitez effacer tous les dossiers ez effacer le dossier ez effacer l un des 50 dossiers moris s dans la m moire du t l phone Conform ment la f onc ion m lodie VIP si le num ro ou dossier d sir a t s lectionn auparavant dans un des DIX dossiers de m lodie VIP le message DUPLICATE NUMBER s affiche Indique qu il n y a plus d information dans la m moire d afficheur Demande d entrer un nom dans l un des 50 emplacements m moire Message indiquant d entrer un num ro de t l phone dans l un de
44. ce of 20 centimeters between the radiator and your body This transmitter must not be co located or operated in conjunction with any other antenna or transmitter For body worn operation this phone has been tested and meets the FCC RF exposure guidelines when used with the belt clip supplied with this product Use of other accessories may not ensure compliance with FCC RF exposure guidelines Information for DECT Product Hie This telephone is compliant with the DECT 6 0 standard wane Which operates in the 1 92GHz to 1 93GHz frequency range Installation of this equipment is subject to notification and coordination with UTAM Any relocation of this equipment must be coordinated through and approved by UTAM UTAM may be contacted at 1 800 429 8826 Table of Contents IMPORTANT INFORMATION sc0eeeeeeee 2 INTERFERENCE INFORMATION 3 TELEPHONE NETWORK INFORMATION 3 REN NUMBER 4 HEARING AID CowearieiLiTY HAC 4 LICENSING serre 4 FCC RF RADIATION Exposure STATEMENT en 4 INFORMATION FOR DECT Pnobucr 4 INTRODUCTION eere eere 8 BEFORE You BEGIN ee 8 PARTS CHECKLIST nn 8 TELEPHONE JACK REQUIREMENTS 9 INSTALLATION casenoseacsendsaasesesseaesoscses 10 DIGITAL SECURITY SYSTEM 10 IMPORTANT INSTALLATION GUIDELINES eee 11 HANDSET LAYOUT eere 12 BASE LAYOUT seau 13 INSTALLING THE PHONE 14 INSTALLING THE HANDSET Battery 14
45. ci dessus n emp che pas n cessairement la d t rioration du service dans certaines situations La r paration des appareils certifi s doit tre confi e un service de maintenance canadien d ment autoris d sign par le fournisseur Toute r paration ou modification effectu e par l utilisateur peut amener la compagnie exiger le d branchement de l installation Par mesure de s curit les utilisateurs doivent s assurer du raccordement r ciproque des circuits de mise la terre du service public d nergie des lignes t l phoniques et s il y a lieu des syst mes int rieurs de conduites d eau m talliques Cette pr caution peut s imposer particuli rement dans les r gions rurales ATTENTION Les utilisateurs ne doivent pas essayer de faire eux m mes ces raccordements Ils doivent communiquer avec le service d inspection comp tent ou faire appel un lectricien selon le cas NOTES Cet appareil ne peut tre utilis pour le service payant monnaie fourni par la compagnie de t l phone Renseignements sur L interf rence Cet appareil produit et utilise l nergie radiofr quence qui peut g ner la r ception radio et t l vision r sidentielle s il n est pas install ou utilis conform ment aux instructions contenues dans ce guide Une protection raisonnable est assur e contre une telle interf rence mais rien ne garantit qu un appareil donn ne produira pas d interf rence Si on soupconne et confi
46. conversation t l phonique Commande de Volume du Recepteur Lorsque le combin est ACTIV en mode conversation vous pouvez r gler le volume du r cepteur en appuyant sur le bouton CALLER ID VOLUME Le ou 4 Vous pouvez choisir parmi cinq niveaux d coute Le t l phone met deux bips quand l intensit maximale ou minimale est atteinte VOL 1 est l intensit minimale VOL 5 l intensit maximale 56 Ne pas D ranger DND Cette fonction vous permet de d sactiver toutes les sonneries des combin s en m me temps en appuyant sur un bouton de la base m me si le volume de la sonnerie de chaque combin a t r gl 1 2 En mode d attente appuyez sur le bouton do not disturb de la base Le t moin DND s allume et le message DO NOT DISTURB s affiche sur chaque combin Pour annuler appuyez de nouveau sur le bouton do not disturb REMARQUE Vous pouvez appuyez sur le bouton do not disturb et activer cette fonction imm diatement m me lorsqu il y a un appel entrant qui sonne ou pendant que vous filtrez un appel apr s que le r pondeur ait pris l appel Fonctionnement de L interphone utilisable SEULEMENT avec des combin s suppl mentaires La fonction d interphone permet de converser avec une personne un autre combin sans occuper la ligne t l phonique vous permettre de recevoir toujours des appels d arriv e Faire un Appel D interphone 1 2 A Assurez vous que le t l phone est D SACTIV
47. d on the handset to select 1ENG 2FRA 3ESP or use the CALLER ID VOLUME le or 4 button to scroll to the desired language English is the default setting Press the mute menu OK button to save your selection Vou will hear a confirmation tone and the selected language shows in the display Handset Name From the Handset Setup Menu L Press the CALLER ID VOLUME v or a button to scroll to the HANDSET NAME sub menu Press mute menu OK button to enter the menu HANDSET NAME shows in the display Use the touch tone pad to enter a name up to 15 characters More than one letter is stored in each of the number keys For example to enter Bill Smith press the 2 key twice for the letter B Press the 4 key 3 times for the letter Press the 5 key 3 times for the letter L Press the 5 key 3 times for the second letter L and press the 1 key to insert a space between the first and last name Press the 7 key 4 times for the letter S press the 6 key once for the letter M press the 4 key 3 times for the letter I press the 8 key for the letter T press the 4 key twice for the letter H NOTE If you make a mistake use the delete intercom conf button to backspace and delete one character at a time Press the mute menu OK button to save your name You will hear a confirmation tone and the handset name shows in the display Ringer Tone You may choose from ten different ringer tones and ten different melodies From the Handset Setup Menu
48. dans la base et la prise murale Rebranchez la pile et chargez la pendant 16 heures S Solutions Afficheur Aucun affichage e Chargez la pile pendant 16 heures Ou remplacez la pile e Assurez vous que l appareil est branch dans une prise de courant non commut e D branchez l alimentation de la base et rebranchez la Message d erreur d afficheur e L unit affiche ce message si elle d tecte autre chose que l information d appelant valide durant le silence qui suit la premi re sonnerie Ce message indique la pr sence de bruit sur la ligne Aucun afficheur Vous devez tre abonn au service d afficheur de nom num ro offert par la compagnie de t l phone pour recevoir l information d appelant Si vous prouvez l un ou l autre des probl mes suivants m me apr s avoir recharg compl tement la pile vous devrez peut tre remplacer la pile e Courte p riode de conversation e Mauvaise qualit du son Port e limit e Indicateur de chargement recherche ou d antenne de combin ne s allume pas 52 Soins et Entretien Voici quelques conseils simples pour pr server le bon fonctionnement et l apparence de ce t l phon viter de placer le t l phone pr s d un appareil de chauffage ou d un appareil produisant du bruit lectrique ex moteurs lampes fluorescentes etc Ne pas exposer le t l phone directement au soleil ou l humidit viter d chapper le combin et de l utiliser abusivement
49. de la base doit tre allum quand le combin repose sur le socle Placez le combin dans le socle de chargement pendant au moins 20 secondes pour r tablir l appareil 50 Le combin ne sonne pas e Assurez vous que l interrupteur de sonnerie du combin est activ e Sinon il faut peut tre charger la pile Rapprochez vous de la base Ily a peut tre trop de postes sur la m me ligne Essayez de d brancher quelques postes t l phoniques e V rifiez le signal de man uvre lectricit statique bruit ou fluctuations Lecombin est il hors de la port e de la base Rapprochez vous de la base e Assurez vous que la base n est pas branch e dans une prise de courant avec un autre appareil m nager Au besoin d placez la base Chargez la pile pendant 16 heures L unit met un signal e Nettoyez les contacts de chargement du combin sans fil et du socle de chargement avec un chiffon doux ou une gomme effacer Voir les solutions pour Aucun signal de man uvre la page pr c dente Remplacez la pile La composition m moire ne fonctionne pas Avez vous programm les touches d emplacement m moire correctement e Avez vous suivi la bonne s quence de composition L appareil bloque et aucune communication entre la base et le combin sans cordon e D branchez l alimentation de la prise de courant et l arri re de la base Retirez la pile du combin Attendez 30 secondes et rebranchez l alimentation
50. dommager l unit Le adapteur de courant fourni avec cet appareil doit tre plac correctement en position verticale ou mont sur le sol 16 GOOG411 GOOG 411 est le nouveau service 411 de Google Avec GOOG 411 vous pouvez trouver l information sur les entreprises locales gratuitement directement partir de votre t l phone Lorsque vous achetez un t l phone GE vous pouvez acc der au service 1 800 GOOG 411 en tout temps en appuyant sur le bouton GOOG 411 1 En mode d attente ou de composition appuyez sur le bouton GOOG 411 le num ro pr r gl du service GOOG 411 est imm diatement compos GOOG 411 Free 411 by Google s affiche 2 Parlez dans le t l phone et dites o vous tes et ce que vous cherchez GOOG 411 vous branchera l entreprise que vous choisissez 3 Lorsque vous avez termin appuyez sur le bouton END cancel pour raccrocher En tout temps pendant l appel Pour revenir en arri re Pour recommencer dites revenir en arri re dites recommencer ou appuyez sur Lorsqu on vous demande la ville et la province e Pour entrer la ville et la province Pour entrer un code postal dites le nom complet par exemple Palo Alto California dites le ou entrez le l aide du clavier Lorsqu on vous demande le nom de l entreprise ou sa cat gorie e Pour entrer le nom d une entreprise dites le nom complet ou sa cat gorie par exemple Joe s Pizzaria ou Pizza e Pour p
51. e la base Quelqu un a appuy sur le bouton find sur la base ou delete intercom conf sur le combin Indique un appel r p t Indique qu un nouvel appel du m me num ro a t recu plus d une fois ndique que le combin recherche la base ndique que le combin est en mode de speakerphone 49 APPEL INCONNU L appel provient d une r gion non NOM INCONNU desservie par le service d afficheur ou NUMERO INCONNU l information n a pas t envoy e Signaux Sonores du Combin Signal Signification Un long ronflement Vous recevez un appel sonnerie en marche Trois courts bips Signal de recherche plusieurs fois Un bip aux 7 secondes Avertissement de pile faible Guide de Depannage Solutions Telephone Aucun signal de man uvre e V rifiez ou r p tez les tapes d installation Le cordon d alimentation de la base est il branch dans une prise sous tension Le cordon t l phonique est il branch dans la base et la prise murale Branchez un autre t l phone dans la m me prise S il ne fonctionne pas le probl me se situe peut tre au niveau du c blage ou du service local Lecombin est il hors de la port e de la base Rapprochez vous de la base e Assurez vous que la pile est correctement charg e 16 heures e Assurez vous que le bloc pile du combin est correctement install e Le combin doit mettre un signal quand vous appuyez sur le bouton TALK et l indicateur de chargement
52. e s lection Vous entendrez une tonalit de confirmation et le nouveau volume de sonnerie s affichera REMARQUE Si vous fermez la sonnerie l ic ne de sonnerie d sactiv e s affiche M lodie VIP Cette caract ristique permet d assigner une m lodie sp cifique une personne qui retient votre attention lorsque ce num ro appelle Lorsqu une m lodie VIP est assign e et que cette personne appelle l appareil sonne normalement le temps d une sonnerie et encha ne avec la m lodie VIP Vous avez le choix entre dix m lodies diff rentes et vous pouvez m moriser 10 dossiers VIP REMARQUE Cette caract ristique ne fonctionne que si les conditions suivantes sont satisfaites 1 Vous tes abonn au service d identification des appels 2 Vous avez pr c demment m moris le dossier d identification de l appelant Le message AUC MEM UTILIS s affichera pour rappeler l utilisateur de transf rer d abord le dossier d identification de l appelant 25 M morisation des M lodies VIP Du Menu D installation de Combin 1 Appuyez sur le bouton CALLER ID VOLUME ou 4 pour afficher le sous menu MELODIE VIP 2 Appuyez sur le bouton mute menu OK pour s lectionner la fonction M lodie VIP et afficher le dossier VIP 1 Si VIP 1 ne contient PAS de num ro ou de donn es sp cifiques il affichera VIDE 3 Appuyez sur le bouton CALLER ID VOLUME ou 4 pour s lectionner un emplacement de m lodie VIP Il y en a 10 qui ne con
53. e talk mode and resume your original telephone conversation 39 Three Way Calling 1 During an external call press the delete intercom conf button LINE ON HOLD EXTENSION shows in the display 2 Use the touch tone pad to select Handset 8 You will hear a paging tone and PAGING shows in the originating handset s display NOTE PAGING FROM shows in the display on the receiving handset and the receiving handset presses the delete intercom conf or TALK button to answer the intercom 3 When the receiving handset connects press the delete intercom conf button on the originating handset to conference with the receiving handset and the external caller CONFERENCE shows in the display on the originating and receiving handsets NOTE A handset can enter conference mode directly by pressing TALK or SPEAKER on the second handset during a call Transferring External Calls to Other Handsets During an external call you may transfer the external call to another handset 1 Press the delete intercom conf button on the originating handset to put an external call on hold and then page the receiving handset 2 Use the touch tone pad on the handset to select Handset You will hear a paging tone PAGING shows on the originating handset s display and PAGING FROM shows on the receiving handset s display 3 When the receiving handset connects press the TALK or SPEAKER button on the originating handset to transfer the call OR 4 Presst
54. eceive a call the Caller ID information is transmitted between the first and second ring The Caller ID information appears on the display while the phone rings giving you a chance to monitor the information and decide whether or not to answer the call 41 Storing CID Records In CID Memory If you are not at home or cannot answer your telephone s Caller ID memory stores the data for the 40 most recent calls you received so you can see who called while you were unavailable When the 41st call is received the oldest Caller ID record 1st call is automatically deleted You may review the stored information at any time Calls received since your last review show as NEW in the display Calls that have not been previously reviewed but were received from the same number more than once show as REPT in the display Reviewing CID Records As calls are received and stored the display is updated to let you know how many calls have been received To scroll CID records 1 Make sure the phone is OFF not in TALK model 2 Press the CALLER ID VOLUME button to review the newest CID record 3 Press the CALLER ID VOLUME a button to review the oldest CID record first 42 Dialing a CID Number 1 Make sure the phone is OFF not in TALK mode 2 Use the CALLER ID VOLUME or 4 button to display the desired record 3 Pressthe TALK or SPEAKER button The number dials automatically NOTE Depending on a how the incoming caller s phone nu
55. eler le nom d une entreprise appuyez sur la touche 1 et pelez le avec Lorsque vous coutez les r sultats Pour naviguer entre les diff rents r sultats e Pour obtenir plus d informations Pour obtenir de l aide le clavier par exemple JOUETS TOYS serait 568387 dites ou appuyez sur le num ro dans la iste dites d tails dites aide 17 Programmation du Telephone Ecran D attente Le combin affiche le num ro du combin et le nom de l utilisateur 12 18 USER NAME HANDSET X Fonctions de Programmation Le syst me utilise un menu structur pour vous permettre d avoir acc s toutes ses fonctionnalit s Vous pouvez programmer les caract ristiques suivantes partir du menu principal Annuaire Ecoute Distance R glage du R veil Param tres du Combin Annuaire Chaque combin peut enregistrer jusqu 50 dossiers dans son annuaire pour la composition rapide chaque dossier peut avoir un num ro de 20 chiffres maximum ainsi qu un nom de 15 caract res maximum Affichage des Dossiers 1 Assurez vous que le t l phone est D SACTIV pas en mode conversation Appuyez sur le bouton mute menu OK pour aller au menu Appuyez sur le bouton CALLER ID VOLUME ou 4 pour afficher PHONEBOOK Appuyez sur le bouton mute menu OK pour entrer le menu PHONEBOOK Utilisez sur le bouton CALLER ID VOLUME ou 4 pour afficher VIEW RECORDS 6 Appuyez sur le bouton mute menu OK
56. er name for the registered handset Indicates you must register a non registered handset prior to use 47 INCOMPLETE DATA LINE IN USE LONG DISTANCE LOW BATTERY NEW VOICE MAIL MSG WAITING OFF NEW CALL XX NO CALLS NO USER MEMORY OUT OF RANGE PAGING or PAGING FROM REPT SEARCHING SPKR UNKNOWN CALLER NAME NUMBER 48 Caller information is interrupted during transmission or the phone line is excessively noisy Indicates no CID information was received you are not subscribed to CID service or CID service is not working Displays on handset while the line is in use ndicates CID record is from a long distance call ndicates the battery needs to be charged ndicates voice mail has not been retrieved from service provider ndicates voice mail has been retrieved from service provider XX represents the number of new CID records not reviewed Indicates there are no CID records in memory Indicates the memory location contains no user memories and the user is trying to mark a specific user record for VIP MELODY May indicate handset is too far away from the base or that the power has been interrupted Move closer and check connections Someone pressed the find button on the base or delete intercom conf button on the handset Indicates a repeat call message Indicates a new call from the same number was received more than once Indicates handset is searching for the base Indicates the h
57. ercom conf LIGNE EN GARDE POSTE appara t dans l afficheur Utilisez le clavier num rique pour choisir le Combin 1 ou le Combin 2 Vous entendez une tonalit de recherche et RECHERCHE est affich au combin d origine REMARQUE RECHERCHE DE est affich au combin r cepteur et la personne ce combin doit appuyer sur le bouton delete intercom conf ou TALK pour r pondre l appel par interphone Lorsque le combin r cepteur est raccord appuyez sur le bouton delete intercom conf du combin d origine pour effectuer un appel conf rence avec le combin r cepteur et l appelant ext rieur CONFERENCE appara t dans l afficheur du combin d origine et du combin r cepteur REMARQUE Un combin peut entrer directement en mode conf rence pendant un appel en appuyant sur TALK ou SPEAKER du deuxi me combin 39 Renvoi D appels Exterieurs a D autres Combines Vous pouvez renvoyer un appel ext rieur un autre combin pendant qu il est en Cours 1 2 40 Appuyez sur le bouton delete intercom conf du combin d origine pour mettre un appel ext rieur en garde puis rechercher le combin r cepteur Utilisez le clavier num rique du combin pour choisir Combin 1 ou Combin 2 vous entendrez une tonalit de recherche RECHERCHE appara t dans l afficheur du combin d origine et RECHERCHE DE appara t dans celui du combin r cepteur Quand le combin r cepteur entre en communication appuyez s
58. escribed in the Programming Functions Handset Setup Ringer Volume menus The other one is this short cut to ringer menu 1 Make sure the phone is OFF not in TALK model 2 Press the pause button to display SET RINGER LEVEL 5 3 Use the CALLER ID VOLUME v or 4 button to scroll to your selection LEVEL 5 is the default setting 4 Press pause button again to save and display the new selection for a few seconds Flash Call Waiting If you subscribe to the combined Call Waiting Caller ID service from your local telephone company you will receive Caller ID information if available on Call Waiting calls During a phone call you will hear a beep to indicate another call is waiting on the line and Caller ID information for the waiting call shows on the handset display e To connect to the waiting call press the TALK or SPEAKER button on the handset and your original call is put on hold e To switch between the two calls press the TALK or SPEAKER button 34 Last Number Redial You may redial a number up to 25 digits long To quickly redial the last number you dialed 1 Press the TALK or SPEAKER button 2 Press the redial format button OR 3 Press the redial format button first then use the CALLER ID VOLUME or a button to select the desired redial number Press the CALLER ID VOLUME a to review the oldest call and scroll toward the most recent calls higher numbers Press the CALLER ID VOLUME w to review t
59. eux et avec votre nouveau t l phone Si vous tes aux prises avec de l interf rence consultez les guides d utilisation de ces appareils sur la mani re de param trer les canaux afin d liminer l interf rence Les appareils courants susceptibles d utiliser la fr quence de 1 9 GHz comprennent les metteurs sans fil audio vid o les r seaux informatiques sans fil les syst mes t l phoniques sans fil avec postes multiples et certains syst mes t l phoniques sans fil grande port e 11 Importantes Lignes Directrices sur L installation 12 vitez les sources de bruit et de chaleur comme les moteurs les lampes fluorescentes les fours micro ondes les appareils de chauffage et le soleil direct vitez les endroits extr mement poussi reux humides et froids vitez les autres t l phones sans cordon et les ordinateurs personnels Ne jamais installer les c bles t l phoniques pendant un orage lectrique Ne jamais installer de prises t l phoniques dans des endroits humides moins qu elles soient sp cialement concue pour endroits humides Ne jamais toucher les fils ou bornes t l phoniques non isol s moins que la ligne t l phonique ait t d branch e de l interface r seau Installer ou modifier les lignes t l phoniques avec soin Pr sentation du Combin Indicateur de messages afficheur E vocaux re us IMVR visuel de sonnerie TALK bouton parler unm gi CALLER ID
60. harge cradles belt clips battery packs and covers than shown above For Model 28811xx4 there will be THREE additional handsets charge cradles belt clips battery packs and covers than shown above For Model 28811xx5 there will be FOUR additional handsets charge cradles belt clips battery packs and covers than shown above For Model 28811xx6 there will be FIVE additional handsets charge cradles belt clips battery packs and covers than shown above Telephone Jack Requirements To use this phone you need an RJ11C type modular Wall plate telephone jack which might look like the one pictured here f installed in your home If you don t have a modular jack 2 Modular call your local phone company to find out how to get one telephone installed ue o line jack o In stallation Digital Security System Your cordless phone uses a digital security system to protect against false ringing unauthorized access and charges to your phone line 10 INSTALLATION NOTE Some cordless telephones operate at frequencies that may cause or receive interference with nearby TVs microwave ovens and VCRs To minimize or prevent such interference the base of the cordless telephone should not be placed near or on top of a TV microwave ovens or VCR If such interference continues move the cordless telephone farther away from these appliances Certain other communications devices may also use the 1 9 GHz frequency for com
61. he CALLER ID VOLUME w or button to display the CID record you want to delete Press the delete intercom conf button The display shows DELETE CALL ID Press the delete intercom conf button to erase the record showing in the display The display shows DELETED 44 NOTE Press the END cancel button to return to the standby mode without deleting any CID records Deleting All CID Records 1 Make sure the phone is OFF not in TALK mode 2 Use the CALLER ID VOLUME or 4 button to display any Caller ID record 3 Press and hold the delete intercom conf button until DELETE ALL shows in the display 4 Press delete intercom conf button to erase all of the current CID records The display shows DELETED followed by NO CALLS NOTE Press the END cancel button to return to the standby mode without deleting any CID records Belt Clip and Optional Headset Connecting the Belt Clip 1 To attach the belt clip insert the sides of the belt clip into the slots on each side of the handset 2 Snapthe ends of the belt clip into place Connecting an Optional Headset to the Handset Each handset can be used with an optional headset hands free operation 1 Connect the headset to the headset jack on the side of the handset The handset receiver and microphone are disabled when the headset is connected 2 Adjustthe headset to rest comfortably on top of your head and over your ear Move the microphone to approximately two to three inches f
62. he TALK or SPEAKER button on the originating handset to transfer the call If the receiving handset does not answer within 30 seconds the originating handset rings back and displays CALLBACK If the originating handset does not answer within 30 seconds the call is automatically dropped 40 Caller ID CID IMPORTANT In order to use this unit s Caller ID features you must subscribe to either the standard Name Number Caller ID Service or Call Waiting Caller ID Service To know who is calling while you are on the phone you must subscribe to Call Waiting Caller ID Service This unit receives and displays information transmitted by your local phone company This information can include the phone number date and time or the name phone number date and time Time Date Number of Calls Caller ID Phone Number Caller ID Name Call Waiting Caller ID Provided you subscribe to Call Waiting Caller ID service from your phone company if you receive an incoming call and you are using the GE multi handset system a beep indicates the presence of a Call Waiting call on the line The Call Waiting Caller ID information will be displayed and stored in the history of all handsets in the system e When you hear the call waiting beep in the handset receiver press the TALK or SPEAKER button to put the current call on hold and answer the incoming call Press TALK or SPEAKER again to return to the original call Receiving CID Records When you r
63. he newest call and scroll to older calls lower numbers NOTE You may choose from three last dialed numbers 4 Pressthe TALK or SPEAKER button The number dials automatically If you get a busy signal and want to keep dialing the number press the redial format button to quickly redial the number Exit Press the END cancel button to exit a menu function and return to the standby screen Page The page feature helps you locate a misplaced handset To send and receive pages all handsets must be registered If your handset is not registered follow the instructions in the Registration section of this manual 55 Handset to Handset Paging applicable only with additional handsets 1 Make sure the phone is OFF not in TALK model 2 Press and release the delete intercom conf button on a handset PAGING EXTENSION shows in the display 3 Usethe touch tone pad to enter the handset number you want to page 4 Tocancel the page press the END cancel delete intercom conf or TALK button on the originating handset or press the END cancel button on the receiving handset Paging All Handsets from a Handset applicable only with additional handsets 1 Make sure the originating phone is OFF not in TALK mode 2 Press and release the delete intercom conf button on a handset PAGING EXTENSION shows in the display 3 Use the touch tone pad to enter the handset number you want to page 1 to page Handset 1 2 to page handset 2 etc
64. hone Calls 39 V VIP Melody Visual Indicators VMWI Visual Ringer Indicator on Handset W Warranty 24 32 52 53 59 Visit the GE website at www GE com phones Model 28811 00024631 Rev 0 Can E F 08 02 Printed in China THOMSON images amp beyond imag y Le Thomson Digital Technologies Ltd 30 Eglinton Ave W Suite 304 Mississauga ON Canada L5R 3E7 2008 Thomson Digital Technologies Ltd Trademark s amp Registered Marquels amp d pos es Modele S rie 28811 DECT 6 0 Combin san fils de Syst me T l phonique Reponduer Haut Parleur Guide d Utilisation Votre nouveau syst me t l phonique GE est EXTENSIBLE jusqu 6 combin s avec l achat du combin optionnel 28801 avec socle de chargement Renseig nements Importa nts AVIS Ce produit est conforme aux sp cifications techniques applicables d Industrie Canada Son fonctionnement est soumis aux deux conditions suivantes 1 Cet appareil ne peut causer de l interf rence et 2 Cet appareil doit accepter toute interf rence y compris l interf rence pouvant entra ner le fonctionnement non souhaitable de l appareil Avant d installer cet appareil l utilisateur doit v rifier s il est permis de le raccorder aux installations de la compagnie locale de t l communications L installation doit de plus respecter les m thodes de raccordement approuv es L abonn doit savoir que le respect des conditions mentionn es
65. immediately The telephone company may make changes in its communications facilities equipment operations or procedures where such action is required in the operation of its business If these changes are expected to affect the use or performance of your telephone equipment the telephone company will likely give you adequate notice to allow you to maintain uninterrupted service Notice must be given to the telephone company upon termination of your telephone from your line REN Number On the bottom of this equipment is a label indicating among other information the Ringer Equivalence Number REN for the equipment The REN is useful in determining the number of devices you may connect to your telephone line and still have all of these devices ring when your telephone number is called In most but not all areas the sum of the RENs of all devices connected to one line should not exceed 5 To be certain of the number of devices you may connect to your line as determined by the REN you should contact your local telephone company REN Number is located on the cabinet bottom Hearing Aid Compatibility HAC This telephone system meets FCC standards for Hearing Aid Compatibility Licensing Licensed under US Patent 6 427 009 FCC RF Radiation Exposure Statement This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment This equipment should be installed and operated with a minimum distan
66. la prise 46 Remplacement de la Pile ATTENTION Pour r duire le risque d incendie ou de blessures utilisez seulement la batterie approuv par Thomson Inc d hydrure de Nickel m tal Ni MH du Model 5 2814 qui est compatible avec cette unit 1 Assurez vous que le t l phone est D SACTIV pas en mode TALK avant de remplacer la pile Retirez la porte du logement pile D branchez la fiche de pile de la prise dans le logement pile et retirez la pile du combine Ins rez la nouvelle pile et rebranchez la fiche 5 Remettez la porte du logement pile en place Placez le combin sur la base ou le socle de chargement pour charger la pile Si vous ne chargez pas correctement la pile du combin pendant 16 heures au moment de l installation initiale du t l phone et ou quand vous installez un bloc pile neuf le rendement long terme de la pile sera compromi Pr cautions Prendre e Ne pas br ler d monter mutiler ni percer la pile Comme d autres piles de ce type des produits toxiques peuvent s chapper et causer des blessures e Afin de r duire les risques d incendie ou de blessure utilisez seulement la pile d hydrure de Nickel m tal Ni MH indiqu e dans le Guide de l utilisateur e Garder les piles hors de la port e des enfants e Retirez les piles si vous rangez l appareil pour plus de 30 jours REMARQUE Le sceau RBRC Soci t de recyclage des piles rechargeables sur la pile de cet app
67. le l arri re du combin 3 Raccordez le connecteur de la pile dans la prise situ e l int rieur du compartiment REMARQUE Pour assurer une installation correcte de la pile le connecteur est clavet et ne peut tre ins r que dans une seule position PILE APPUYEZ FIL NOI FERMEMENT FIL ROUGE 4 Ins rez le bloc piles 5 Refermez le compartiment de la pile en poussant le couvercle vers le haut jusqu ce qu il s enclenche 15 Poste de Base 1 Choisissez un endroit pr s d une prise de courant et d une prise t l phonique murale RJ11C et placez le t l phone sans fil sur une surface plane comme un bureau ou une table ou fixez le au mur 2 Branchez une extr mit du cordon t l phonique dans la prise TEL LINE l arri re de la base et l autre extr mit dans une prise murale modulaire 3 Branchez le adapteur d alimentation c a dans la prise de courant et le connecteur c c dans la prise l arri re de la base 4 Placez le combin sur le socle de la base L indicateur charge marche vocaux s allume pour confirmer que la pile se charge 5 Laissez le t l phone se charger pendant 16 heures avant l utilisation initiale Si vous ne chargez pas correctement le t l phone le rendement de la pile sera compromis ATTENTION Utilisez seulement l adapteur mod le de la puissance 5 2812 qui accompagne l appareil L utilisation A d autres adapteurs de puissance peut en
68. le des Matieres PINCE CEINTURE ET CASQUE EN OPTION cero ns cses denses 46 RACCORDEMENT DE LA PINCE CEINTURE eee 46 RACCORDEMENT D UN CASQUE OPTIONNEL AU CASQUE 46 REMPLACEMENT DE LA PILE 47 PR CAUTIONS PRENDRE 47 MESSAGES AFFICH S GUIDE DE DEPANNAGE SOLUTIONS TELEPHONE SOLUTIONS AFFICHEUR AVERTISSEMENT AFIN D EVITER LES LE SYMBOLE DE DANGERS DANS UN TRIANGLE DINCENDEET u D LECTROCUTION UNE TENSION DANGEREUSE A NE PAS EXPOSER L INT RIEUR DE ATTENTION RISQUE DE CHOC ELECTRIQUE NE PAS ENLEVER ATTENTION AFIN DE R DUIRE LES RISQUES D LECTROCUTION NE PAS ENLEVER LE COUVERCLE NI LE COTE ARRIERE AUCUNE PIECE INTERIEURE NE PEUT ETRE REPAREE PAR L UTILISATEUR POUR TOUTE LE POINT D EXCLAMATION INDIQUANT QUE L APPAREIL EST FOURNI AVEC DES INSTRUCTIONS IMPORTANTES L APPAREIL R PARATION CONSULTER DES CET APPAREIL A LA TECHINICIENS COMP TENTS PLUIE NI A L HUMIDIT VOIR LES INSCRIPTIONS SOUS L APPAREIL OU A L ARRIERE DU BOITIER Introduction ATTENTION Vous devez respecter certaines r gles de s curit lorsque vous utilisez un appareil t l phonique Reportez vous aux INSTRUCTIONS IMPORTANTES DE S CURIT qui accompagnent ce produit et conservez les pour r f rence ult rieure IMPORTANT tant donn que les t l phones sans cordon fonctionnent l lectricit vous devriez di
69. mber is formatted when it is received and b whether or not you previously pre programmed your local area code into the set up menu you may need to adjust the format of the incoming caller s stored phone number before making the call press the redial format button to adjust the number and try again Available formats include Number of digits Explanation Example Eleven digits long distance code 1 1 317 888 8888 3 digit area code 7 digit telephone number Ten digits 3 digit area code 317 888 8888 7 digit telephone number Seven digits 7 digit telephone number 888 8888 43 Storing CID Records in Internal Memory You may also store CID information in the phone s internal memory NOTE It is important that you format CID records correctly BEFORE storing in internal memory as you cannot reformat CID records stored in memory Make sure the phone is OFF not in TALK model Use the CALLER ID VOLUME or 4 button to scroll to the desired CID record Press the mute menu OK button to store the number SAVED TO MEMORY shows in the display NOTE Press the END cancel button once to keep the previous setting making no changes and return to the menu NOTE If the selected CID record contains any information that is non numeric the unit will not allow this record to transfer to the internal user memory The handset will display UNABLE TO STORE Deleting a CID Record 1 2 Make sure the phone is OFF not in TALK model Use t
70. munication and if not properly set these devices may interfere with each other and or your new telephone If you are concerned with interference please refer to the owner s manudl for these devices on how to properly set channels to avoid interference Typical devices that may use the 1 9 GHz frequency for communication include wireless audio video senders wireless computer networks multi handset cordless telephone systems and some long range cordless telephone systems Important Installation Guidelines Avoid sources of noise and heat such as motors fluorescent lighting microwave ovens heating appliances and direct sunlight Avoid areas of excessive dust moisture and low temperature Avoid other cordless telephones or personal computers Never install telephone wiring during a lightning storm Never install telephone jacks in wet locations unless the jack is specifically designed for wet locations Never touch non insulated telephone wires or terminals unless the telephone line has been disconnected at the network interface Use caution when installing or modifying telephone lines 11 Handset Layout display CALLER ID VOLUME caller id volume down button SPEAKER button delete intercom conf delete intercom conference butto tone button mute menu OK button mf Se o Tercom ae d microphone 12
71. nd handset while 3rd handset intercoms with 4th handset Receiving an Intercom Call When you receive an intercom call your handset beeps To answer the call press the delete intercom conf button or TALK button 38 Advanced Intercom Features Receiving an Incoming Call During an Intercom Call If you receive a telephone call during an intercom call the intercom call is immediately terminated and both handsets ring Either handset user may press the TALK or SPEAKER button to answer the call Using Intercom with External Telephone Calls During a telephone call you may use the intercom paging function to page another handset and have an off line private two way intercom conversation You may also have a three way conversation between the external caller and the handsets or you may transfer the external telephone call to another handset NOTE Before you intercom page another handset you must decide whether you want to create a two way or a three way conversation Two Way Calling 1 During an external call press the delete intercom conf button and use the touch tone pad to enter the handset number you want to call NOTE The receiving handset presses the delete intercom conf button to answer the intercom call Both intercom users may speak privately The external caller will not hear the intercom conversation 2 When finished press the END cancel button or delete intercom conf button to end the intercom call return to th
72. ndex Important Information 2 Important Installation Guidelines 11 Information for DECT Product 4 Inserting a Pause in the Dialing Sequence 18 Installation 10 Installing the Handset Battery 14 Installing the Phone 14 Intercom Operation 38 Interference Information 3 Introduction 8 K Key Tone 26 L Language 22 Last Number Redial 35 Licensing 4 M Making a Call 33 Making an Intercom Call 38 Mute 36 P Page 35 Paging All Handsets from a Handset 36 Paging from the Base Group Page 36 Parts Checklist 8 Phone Book 17 Programming Functions 17 Programming the Telephone 17 57 Index R Receiver Volume Control 37 Receiving an Incoming Call During an Intercom Call 39 Receiving an Intercom Call 38 Receiving CID Records 41 Registration 29 REN Number 4 Review Records 17 Reviewing And Deleting Stored VIP Melody Record 26 Reviewing CID Records 42 Ringer Tone 23 Ringer Volume 24 34 Room Monitor 20 58 S Set Alarm Clock Set Day Time Speakerphone Operation Standby Screen Storing CID Records In CID Memory Storing CID Records in Internal Memory Storing VIP Melody 21 27 52 17 42 44 25 Index Telephone Jack Requirements 9 Telephone Network Information 3 Telephone Operation 32 Telephone Solutions 50 Three Way Calling 40 Tone Pulse 28 Transferring External Calls to Other Handsets 40 Troubleshooting Guide 50 Two Way Calling 39 U Using Intercom with External Telep
73. nter the menu DEFAULT SETTING 1YES 2NO shows in the display The default setting is 2NO 3 Usethe touch tone pad to select 1YES or 2NO or use the CALLER ID VOLUME v or a button to move the cursor to 1YES or 2NO NOTE If you choose YES all the settings in the programmable menu are returned to factory default setting 4 Press the mute menu OK button to save your selection You will hear a confirmation tone 31 Telephone Operation Visual Indicators Base The charge in use voicemail indicator on the base will flash to alert you to an incoming call during paging or if you have a message waiting from your service provider The indicator will remain lit when a handset is in the base charging or when the line is in use Handset The TALK and SPEAKER indicator buttons flash when you receive a call and remain lit during a call The keypad and CID will also light when a call is received VMWI Visual Ringer Indicator on Handset IMPORTANT In order to use this unit s Voice Mail Waiting Indicator VMWI feature you must subscribe to this service from your phone company The VMWI indicator on the top of the handset flashes when you receive a new message from your service provider Also it serves as a Visual Ringer function It will flash when there is an incoming call Speakerphone Operation NOTE If you are using the speakerphone remain close to handset so the party you are speaking to can hear you If you are using the handset and
74. ny manufacturing defect becomes apparent in this product within 1 year from the original date of purchase it will be replaced free of charge including return transportation This warranty does not include damage to the product resulting from accidents misuse or leaking batteries Should your product not perform properly during the warranty period either 1 Returnitto the selling dealer with proof of purchase for replacement OR 2 Call 1 800 522 0338 English or 1 800 522 0445 French for instructions concerning where to mail the product The provisions of this written warranty are in addition to and not a modification of or subtraction from the statutory warranties and other rights and remedies contained in any applicable legislation and to the extent that any such provisions purport to disclaim exclude or limit any such statutory warranties and other rights and remedies such provisions shall be deemed to be amended to the extent necessary to comply therewith Attach your sales receipt to this booklet for future reference This information is required if service is needed during the warranty period PURCHASE DATE NAME OF STORE 53 Accessory Information DESCRIPTION MODEL NO Handset Replacement Battery 5 2814 Belt Clip 5 2813 Accessory Handset 5 2811 with Charge Cradle To order call the nearest distributor for your area Ontario 905 624 8516 Manitoba 204 783 2088 British Columbia 604 438 8001 Quebec 514 352
75. onfirm DE REGISTER shows in the display You will hear a confirmation tone Then DEREGISTERED shows in the display to confirm the handset is deregistered NOTE When you complete the de registration process HANDSET NEEDS REGISTRATION shows in the display To use the handset you MUST re register the handset using the Registration process Global De registration If one or more handsets becomes lost you should de register all handsets to ensure proper system operation WARNING It is not recommended that a handset be de registered unless absolutely necessary because once a handset is de registered that handset s telephone features cannot be used until the handset is re registered 1 Disconnect power from the base by pulling the plug out of the back of the unit 2 Press and hold the find button and while holding the find button reconnect the power 3 Continue to hold the find button until the charge in use voicemail light flashes rapidly Release the find button Press and release the find button on the base once All handsets are de registered and HANDSET NEEDS REGISTRATION shows in the display Default Setting As you become familiar with this system you may prefer to use the system s original settings Follow the steps below to return to the factory default settings From the Handset Setup Menu 1 Press the CALLER ID VOLUME v or 4 button to scroll to the DEFAULT SETTING sub menu 2 Press the mute menu OK button to e
76. phone est D SACTIV pas en mode conversation 2 Appuyez sur le bouton pause pour afficher to REGLER SONNERIE LEVEL 5 3 Utilisez le bouton CALLER ID VOLUME v ou pour afficher votre s lection Le param tre par d faut est LEVEL 5 4 Appuyez de nouveau sur le bouton pause pour m moriser et afficher la nouvelle s lection pendant quelques secondes Flash Appel en Attente Si vous tes abonn au service d afficheur d appel en attente combin offert par la compagnie de t l phone vous recevrez l information d appelant s il y a lieu lors des appels en attente Pendant un appel vous entendrez un bip pour indiquer qu un autre appel est en attente sur la ligne et l information de l appelant en attente appara t dans l afficheur du combin e Pour prendre l appel en attente appuyez sur le bouton TALK ou SPEAKER du combin l appel initial est alors mis en garde e Appuyez sur le bouton TALK ou SPEAKER pour passer d un appel l autr Recomposition du Dernier Numero Vous pouvez recomposer un num ro comptant jusqu 25 caract res Pour recomposer rapidement le dernier num ro compos 1 Appuyez sur le bouton TALK ou SPEAKER 2 Appuyez sur le bouton redial format OU 3 Appuyez d abord sur le bouton redial format et utilisez le bouton CALLER ID VOLUME ou 4 pour s lectionner le num ro recomposer Appuyez sur le bouton CALLER ID VOLUME 4 pour rappeler l appel le plus ancien et faire d filer les num
77. pour confirmer tous les dossiers sont affich s en ordre alphab tique 7 Appuyez sur le bouton CALLER ID VOLUME w ou 4 ou entrez une lettre pour afficher les dossiers cn d QD 18 Ajout de Dossiers d Ou E tal bat Assurez vous que le t l phone est D SACTIV pas en mode conversation Appuyez sur le bouton mute menu OK pour aller au menu Appuyez sur le bouton CALLER ID VOLUME ou 4 pour afficher PHONEBOOK Appuyez sur le bouton mute menu OK pour entrer le menu PHONEBOOK Utilisez sur le bouton CALLER ID VOLUME ou 4 pour afficher ADD RECORDS Appuyez sur le bouton mute menu OK pour confirmer ENTER NAME s affiche Utilisez le clavier pour entrer un nom jusqu 15 caract res Chacune des ouches num riques comprend plus d une lettre Par exemple pour entrer le nom BILL SMITH appuyez deux fois sur la touche 2 pour obtenir la lettre B Appuyez rois fois sur la touche 4 pour la lettre Appuyez trois fois sur la touche 5 pour la ettre L Appuyez trois fois sur la touche 5 pour la deuxi me lettre L et appuyez sur a touche 1 pour ins rer un espace entre le pr nom et le nom Appuyez quatre fois sur la touche 7 pour la lettre S une fois sur la touche 6 pour la lettre M trois fois sur la touche A pour la lettre sur la touche 8 pour la lettre T et deux fois sur la ouche 4 pour la lettre H REMARQUE Si vous faites une erreur appuyez sur le bouton delete intercom conf pour revenir en arri re et effacer le carac
78. r charge marche vocaux clignote rapidement Rel chez le bouton find Appuyez une fois sur le bouton find de la base Tous les combin s sont d senregistr s et BESOINS COMBIN ENREGISTREMENT apparait dans l afficheur Reglage par Defaut mesure que vous vous familiariserez avec le syst me vous pr f rerez peut tre utiliser ses r glages initiaux Suivez les tapes ci dessous pour retourner aux r glages par d faut de l usine Du Menu D installation de Combin 2 Appuyez sur le bouton CALLER ID VOLUME Le ou 4 pour afficher le sous menu REGLAGE DEFAUT Appuyez sur le bouton mute menu OK pour ouvrir ce menu Le message REGLAGE DEFAUT 1OUI 2NON s affiche Utilisez le clavier num rique pour choisir 10UI ou 2NON ou le bouton CALLER ID VOLUME w ou 4 pour placer le curseur 1OUI ou 2NON Le r glage par d faut est 2NON REMARQUE Si vous choisissez 1OUI tous les r glages du menu programmable retournent au r glages par d faut de l usine Appuyez de nouveau sur le bouton mute menu OK pour sauvegarder votre choix Vous entendrez une tonalit de confirmation 31 Fonctionnement du Telephone T moins Visuels Base Le t moin indicateur charge marche vocaux de la base clignote pour avertir d un appel entrant pendant la recherche ou s il y a un message en attente de votre service de t l phone Le t moin demeure allum pendant la charge d un combin et si la ligne est occup e Combin Les t moins TA
79. rme une interf rence d une ou plus des facons suivantes r orienter l antenne du r cepteur radio ou t l vision loigner l appareil du r cepteur ou brancher l appareil et le r cepteur dans des prises de circuits diff rents L utilisateur peut aussi demander conseil un technicien en radio t l vision comp tent Cet appareil a t mis l essai et r pond toutes les limites des appareils informatiques de Classe B conform ment l alin a 15 des R glements de la FCC Cet appareil est conforme la r gle RSS 210 d Industrie Canada Information sur le R seau T l phonique Si cet appareil provoque des d rangements sur la ligne et par cons quent sur le r seau t l phonique la compagnie de t l phone signalera s il y a lieu qu elle doit temporairement interrompre le service Si elle est dans l impossibilit de le faire et que les circonstances dictent une telle mesure la compagnie de t l phone peut imm diatement interrompre le service pendant un certain temps La compagnie de t l phone peut apporter des changements ses installations de t l communications son quipement son exploitation ou ses politiques si la poursuite des affaires n cessite de tels changements Si l on croit que ces changements influeront sur l utilisation ou le rendement du t l phone la compagnie doit donner un pr avis suffisant pour permettre de maintenir le service II faut aviser la compagnie de t l phone si l on
80. rom your mouth 3 Pressthe TALK button to answer a call or make calls using the headset 4 Toreturn to normal operation unplug the headset from the jack 45 Changing the Botter CAUTION To reduce the risk of fire or personal injury use only A the Thomson Inc approved Model 5 2814 Nickel metal Hydride battery Ni MH which is compatible with this unit 1 Make sure the telephone is OFF not in TALK mode before you replace the battery 2 Remove the battery compartment door 3 Disconnect the battery plug from the jack inside the battery compartment and remove the battery pack from the handset 4 Insert the new battery pack and connect the cord to the jack inside the battery compartment 5 Putthe battery compartment door back on 6 Place handset in the base or handset charge cradle to charge Allow the handset battery to properly charge for 16 hours prior to first use or when you install a new battery pack If you do not properly charge the phone battery performance will be compromised Battery Safety Precautions e Do not burn disassemble mutilate or puncture Like other batteries of this type toxic materials could be released which can cause injury e Toreduce the risk of fire or personal injury use only the Nickel metal Hydride battery listed in the User s Guide e Keep batteries out of the reach of children e Remove batteries if storing over 30 days NOTE The RBRC seal on the battery used in your Thomson
81. ros jusqu au plus r cent num ro plus lev 34 Appuyez sur le bouton CALLER ID VOLUME pour rappeler l appel le plus r cent et faire d filer les num ros jusqu au plus ancien num ro moins lev REMARQUE Vous pouvez s lectionner un des trois derniers num ros compos s 4 Appuyez sur le bouton TALK ou SPEAKER Le num ro sera compos automatiquement Si vous obtenez un signal d occupation et souhaitez continuer de composer le num ro appuyez sur le bouton redial format pour rapidement recomposer le num ro Quitter Appuyez sur le bouton END cancel pour quitter une fonction de menu et retourner l cran d attente Recherche La fonction de recherche aide rep rer un combin gar Pour envoyer et recevoir des signaux de recherche il faut enregistrer tous les combin s Si votre combin n est pas enregistr suivez les instructions la section Enregistrement de ce guide Recherche de Combine a Combine utilisable SEULEMENT avec des combin s suppl mentaires 1 Assurez vous que le t l phone est D SACTIV pas en mode conversation 2 Appuyez sur le bouton delete intercom conf du combin RECHERCHE POSTE appara t dans l afficheur 3 Utilisez le clavier num rique pour entrer le num ro du combin que vous souhaitez rechercher 4 Pour annuler la recherche appuyez sur le bouton END cancel delete intercom conf ou TALK sur le combin d origine ou appuyez sur le bouton END cancel s
82. rs appuyez sur le bouton mute menu OK pour confirmer ENTER NAME s affiche Reprenez les tapes 7 9 dela rubrique Ajout de Dossiers Suppression de Dossiers 1 cn d OX PS e 20 Assurez vous que le t l phone est D SACTIV pas en mode conversation Appuyez sur le bouton mute menu OK pour aller au menu Appuyez sur le bouton CALLER ID VOLUME ou 4 pour afficher PHONEBOOK Appuyez sur le bouton mute menu OK pour entrer le menu PHONEBOOK Utilisez sur le bouton CALLER ID VOLUME ou 4 pour afficher DELETE RECORDS Appuyez sur le bouton mute menu OK pour confirmer les dossiers sont affich s Appuyez sur le bouton CALLER ID VOLUME ou 4 ou entrez une lettre pour afficher les dossiers appuyez sur le bouton delete intercom conf DELETE s affiche Appuyez sur le bouton mute menu OK pour entrer le menu PHONEBOOK Utilisez sur les boutons delete intercom conf ou mute menu OK encore pour confirmer REMARQUE Si vous ne souhaitez pas changer ou supprimer un dossier appuyez simplement sur le bouton END cancel ou attendez une minute avant de quitter automatiquement le mode de consultation Composition d un Num ro de la M moire Interne Assurez vous que le t l phone est D SACTIV pas en mode conversation Or ES E RS 8 Appuyez sur le bou Appuyez sur le bou Appuyez sur le bou on mute menu OK pour aller au menu on CALLER ID VOLUME w ou 4 pour afficher PHONEBOOK on mute menu OK pour entrer
83. s 50 emplacements m moire Indique qu un ou des appels n ont pas t cout s Indique d entrer le nom de l utilisateur du combin enregistr Indique que vous devez enregistrer un combin non enregistr avant de l utiliser DONNEES INCOMPL LIGNE OCCUPEE INTERURBAIN PILE FAIBLE NOUV MESS VOCA APPEL ATT ARRET NOUVEL APPEL XX PAS D APPEL AUCUNE M MOIRE D UTILISATEUR HORS PORTEE RECHERCHE ou RECHERCHE DE BASE REPT RECHERCHE SPKR L information de l appelant a t interrompue en cours de transmission ou la ligne t l phonique est excessivement bruyante Indique qu aucune information d appelant n a t recue que vous n tes pas abonn au service d afficheur ou que le service d afficheur ne fonctionne pas Affich au combin pendant que la ligne est utilis e Signifie que le dossier ILA est associ une appel interurbain Message indiquant qu il faut charger la pile ndique que la messagerie vocale n a pas t t l charg e du fournisseur de service ndique qu audio messagerie a t recherch du fournisseur de service XX repr sente le nombre de nouveaux dossiers d appelant non consult s ndique que la m moire ne contient aucun dossier d appelant ndique que l emplacement de m moire ne contient pas de m moire utilisateur et que celui ci essaie de marquer un dossier sp cifique comme VIP MELODY Le combin est trop loign de la base Rapprochez vous d
84. sposer d au moins un t l phone avec cordon dans la maison en cas de panne de courant Avant de Commencer Liste de Pi ces pour le Mod le 28811 Assurez vous que la bo te contient les articles suivants Adaptateur CA Bloc pile de combin Combin Y m p ll a y LJ Pi destal de Cordon Couvercle du compartiment de pile Pince ceinture hie b ti de mur t l phonique Dans le cas du Mod le 28811XX2 A il y aura UN combin suppl mentaire un socle de chargement une pince pour ceinture une pile et un couvercle de plus que ce qui est illustr plus haut REMARQUE Si un haut parleur est compris dans l emballage il remplace un combin une pince pour ceinture un bloc pile et un couvercle Dans le cas du Mod le 28811XX3 A il y aura DEUX combin s suppl mentaires deux socles de chargement deux pinces pour ceinture deux piles et deux couvercles de plus que ce qui est illustr plus haut Dans le cas du Mod le 28811XX4 A il y aura TROIS combin s suppl mentaires deux socles de chargement deux pinces pour ceinture deux piles et deux couvercles de plus que ce qui est illustr plus haut Dans le cas du Mod le 28811XX5 A il y aura QUATRE combin s suppl mentaires deux socles de chargement deux pinces pour ceinture deux piles et deux couvercles de plus que ce qui est illustr plus haut Dans le cas du Mod le 28811XX6 A il
85. ssier d appelant 44 Syst me de S curit Num rique 11 T T moins Visuels 32 Tonalit de la Sonnerie 24 Tonalit du Clavier 27 Tonalit Impulsion 29 U Utilisation de L interphone Avec les Appels Exterieurs 38 V Volume de la Sonnerie 25 34 59 Visitez le site Web GE www GE com phones Mod le 28811 00024631 Rev 0 Can E F 08 02 Imprim en Chine THOMSON A j amp b d images amp beyond Thomson Digital Technologies Ltd 30 Eglinton Ave W Suite 304 Mississauga ON Canada L5R 3E7 2008 Thomson Digital Technologies Ltd Trademark s amp Registered Marquels amp d pos els
86. ssiers ER 25 42 D appelants dans la Memoire Interne M morisation des M lodies VIP Messages Affich s Minuterie D appel Modification d un Dossier Enregistr de M lodie VIP N Ne pas D ranger DND Nom du Combin 44 26 48 33 26 37 24 57 Index P Param tres du Combin 23 Pince Ceinture et Casque en Option 46 Poste de Base 16 Pr cautions Prendre 47 Pr sentation de la Base 14 Pr sentation du Combin 13 Programmation du Telephone 18 Q Quitter 35 R Raccordement d un Casque Optionnel au Casque 46 Raccordement de la Pince Ceinture 46 Rappel et Suppression d un Dossier Enregistr de M lodie VIP 27 Reception d un Appel D interphone 38 Reception de Dossiers D appelants 41 Recevoir un Appel Pendant un Appel D interphone 38 Recherche 35 Recherche a Partir de la Base Recherche de Groupe 36 58 Recherche de Combine a Combine 35 Recherche de Tous les Combin s d un Combin 36 Recomposition du Dernier Numero 34 R glage de la Date de l heure 27 R glage du R veil 22 Reglage par Defaut 31 Remplacement de la Pile 47 Renseignements Importants 2 Renseignements sur L interf rence 3 Renseignements sur le Produit DECT 5 Renvoi D appels Exterieurs a D autres Combines 40 Index S Silencieux 36 Soins et Entretien ER Solutions Afficheur 52 Solutions Telephone 50 Suppression de Dossiers 20 Suppression de Tous les Dossiers D appelants 45 Suppression du Do
87. t appuyez et rel chez le bouton delete intercom conf quand le message REGLER IND REGI est affich 28 Tonalit Impulsion Du Menu D installation de Combin 1 Appuyez sur le bouton CALLER ID VOLUME a ou pour aller au sous menu TONE PULSE Appuyez sur le bouton mute menu OK pour ouvrir ce menu Le message TONALITE IMPUL 1TONE 2PUL s affiche Le param tre par d faut est 1 TONE Utilisez le pav num rique ou le bouton CALLER ID VOLUME 4 ou pour S lectionner 1 TONE ou 2 PUL Appuyez sur le bouton mute menu OK pour confirmer Vous entendrez une tonalit de confirmation et la s lection s affichera Enregistrement Vous combin ls sont pr enregistr s et pr ts tre utilis s On ne recommande pas d enregistrer de nouveau le combin moins que ce ne soit absolument n cessaire Du Menu D installation de Combin 1 2 Si n cessaire appuyez sur le bouton CALLER ID VOLUME v ou 4 pour afficher le sous menu ENREGISTREMENT Appuyez sur le bouton mute menu OK pour ouvrir ce menu Le message ENREGISTREMENT 1OUI 2NON s affiche Le param tre par d faut est 2NON Utilisez le clavier num rique pour choisir 1 pour OUI ou 2 pour NON Ou utilisez le bouton CALLER ID VOLUME ou a our atteindre 10UI ou 2NON Si vous s lectionnez 1OUI appuyez sur le bouton mute menu OK Le message TENEZ PAGE BASS ENFON CINQ MINS PUIS APPUYEZ COMBINE PROGRAM s affiche Placez le combin pr s de
88. t re ou le chiffre incorrect Appuyez nouveau sur le bouton mute menu pour sauvegarder votre s lection Le message AJOUTER NUM T L s affiche Utilisez le clavier du combin pour entrer le num ro de t l phone jusqu 20 chiffres incluant les pauses et appuyez sur le bouton mute menu OK pour confirmer Les dossiers sont enregistr s en ordre alphab tique dans l annuaire Insertion D une Pause dans la Sequence de Composition D un Numero Memorise Appuyez sur le bouton pause du clavier num rique du combin pour ins rer une pause dans la s quence de composition quand une pause est n cessaire pour attendre un signal de man uvre par exemple apr s avoir fait le 9 pour obtenir une ligne ext rieure ou pour attendre une tonalit d acc s un ordinateur Chaque pause compte comme un chiffre dans la s quence de composition 19 E 1 2 5 4 5 6 7 8 dition des Dossiers Assurez vous que le t l phone est D SACTIV pas en mode conversation Appuyez sur le bouton mute menu OK pour aller au menu Appuyez sur le bouton CALLER ID VOLUME ou 4 pour afficher PHONEBOOK Appuyez sur le bouton mute menu OK pour entrer le menu PHONEBOOK Utilisez sur le bouton CALLER ID VOLUME ou 4 pour afficher EDIT RECORDS Appuyez sur le bouton mute menu OK pour confirmer les dossiers sont affich s Appuyez sur le bouton CALLER ID VOLUME ou 4 ou entrez une lettre pour afficher les dossie
89. tatic noise or fading in and out The handset may be out of range of the base Move closer to base e Make sure base is not plugged into an electrical outlet with another household appliance If necessary relocate the base e Charge the battery for 16 hours Unit beeps e Clean the charging contacts on the cordless handset and base charge cradle with a soft cloth or an eraser e See solutions for No dial tone on previous page e Replace the battery 50 Memory dialing doesn t work e Did you program the memory location keys correctly e Did you follow proper dialing sequence Unit locks up and no communication between the base and cordless handset e Unplug the power adaptor from the electrical outlet and the back of the base Remove the handset battery Wait for 30 seconds and plug the power adaptor back into the base and electrical outlet Reconnect the battery and charge for 16 hours Caller ID Solutions No Display e Charge the battery for 16 hours Or replace the battery e Make sure the unit is connected to a non switched electrical outlet Disconnect the power adaptor from the base and reconnect it Caller ID Error Message e The unit displays this message if it detects anything other than valid Caller ID information during the silent period after the first ring This message indicates the presence of noise on the line No Caller ID e You must be subscribed to the standard Name Number Caller
90. tement interrompu et les deux combin s sonnent L un ou l autre interlocuteur peut appuyer sur le bouton TALK ou SPEAKER pour r pondre l appel Utilisation de L interphone Avec les Appels Exterieurs Pendant un appel t l phonique vous pouvez utiliser la fonction interphone recherche pour rechercher un autre combin et converser l interphone en priv et hors ligne deux sens Vous pouvez aussi converser trois avec l appelant ext rieur et une personne l autre combin ou vous pouvez renvoyer l appel ext rieur un autre combin REMARQUE Avant de communiquer par interphone rechercher un autre combin vous devez d cider si vous souhaitez converser deux ou trois 38 Appel a Deux 1 Pendant un appel ext rieur appuyez sur le bouton delete intercom conf et utilisez le clavier num rique pour entrer le num ro du combin 1 ou 2 joindre REMARQUE La personne au combin r cepteur doit appuyer sur le bouton delete intercom conf pour r pondre l appel par interphone Les deux personnes l interphone peuvent converser en priv L appelant ext rieur ne peut entendre la conversation par l interphone Quand vous avez termin appuyez sur le bouton END cancel ou delete intercom conf pour interrompre l appel par interphone retourner en mode de conversation et poursuivre la conversation t l phonique initiale Appel a Trois 1 2 Pendant un appel ext rieur appuyez sur le bouton delete int
91. tient aucune donn e 4 Appuyez sur le bouton mute menu OK pour afficher le message CHOISIR MEMOIRE REMARQUE Si l emplacement de m moire ne contient aucun dossier d identification de l appelant et que vous essayez de marquer un dossier sous VIP MELODY le message CHOISIR MEMOIRE ne sera pas affich dans ce cas En lieu et place le message AUC MEM UTILIS s affichera pour aviser l utilisateur 5 Appuyez sur le bouton CALLER ID VOLUME ou 4 pour afficher les dossiers en m moire que vous voulez classer comme VIP 6 Appuyez sur le bouton mute menu OK pour confirmer et afficher MELODIE VIP 01 en vue de s lectionner la m lodie 7 Appuyez sur le bouton CALLER ID VOLUME ou 4 pour s lectionner entre M lodie 01 et M lodie 10 un extrait est jou pendant la s lection 8 Appuyez sur le bouton mute menu OK pour confirmer REMARQUE Si le num ro ou dossier d sir a t s lectionn auparavant dans un des DIX dossiers de m lodie VIP le message COPIE NUMERO s affiche Modification d un Dossier Enregistr de M lodie VIP Utilisez le processus de m morisation de m lodie VIP pour modifier le num ro d un dossier s lectionn et pour remplacer un num ro par un nouveau num ro de t l phone Lorsque le message REMPLACER VIP s affiche vous devez appuyer sur le bouton mute menu OK du combin pour confirmer la modification 26 Rappel et Suppression d un Dossier Enregistr de M lodie VIP Du Menu
92. tion de la Langue 1Ang 2Fra 3Esp s affiche bou la la 4 App Utilisez les touches du combin pour s lectionner 1ENG 2FRA ou 3ESP ou utilisez le on CALLER ID VOLUME w ou 4 pour choisir la langue d sir e L anglais est ngue par d faut uyez sur le bouton mute menu OK pour enregistrer votre s lection Vous entendrez une tonalit de confirmation et la langue s lectionn e s affichera 23 Nom du Combin Du Menu D installation de Combin 1 Appuyez sur le bouton CALLER ID VOLUME w ou 4 pour afficher le sous menu COMBINE NOM 2 Appuyez sur le bouton mute menu OK pour ouvrir ce menu Le message COMBINE NOM s affiche 3 Utilisez le clavier pour entrer un nom jusqu 15 caract res Chacune des touches num riques comprend plus d une lettre Par exemple pour entrer le nom BILL SMITH appuyez deux fois sur la touche 2 pour obtenir la lettre B Appuyez trois fois sur la touche 4 pour la lettre Appuyez trois fois sur la touche 5 pour la lettre L Appuyez trois fois sur la touche 5 pour la deuxi me lettre L et appuyez sur la touche 1 pour ins rer un espace entre le pr nom et le nom Appuyez quatre fois sur la touche 7 pour la lettre S une fois sur la touche 6 pour la lettre M trois fois sur la touche 4 pour la lettre sur la touche 8 pour la lettre T et deux fois sur la touche 4 pour la lettre H REMARQUE Si vous faites une erreur appuyez sur le bouton delete intercom conf pour reculer en effacant un car
93. tore the default setting to press and release delete intercom conf when SET AREA CODE shows in the display Tone Pulse From the Handset Setup Menu 28 Press the CALLER ID VOLUME or button to scroll to the TONE PULSE sub menu Press mute menu OK button to enter the menu TONE PULSE 1TONE 2PULSE shows in the display The default setting is 1 TONE Use the touch tone pad or CALLER ID VOLUME or to enter 1 TONE or 2 PULSE Press the mute menu OK button to confirm You will hear a confirmation tone and your selection shows in the display Registration Your packaged handsets are pre registered and ready to use It is not recommended that a handset be registered again unless absolutely necessary From the Handset Setup Menu 1 Press the CALLER ID VOLUME or a button to scroll to the REGISTRATION sub menu 2 Press the mute menu OK button to enter the menu REGISTRATION 1YES 2NO shows in the display The default setting is 2NO 3 Use the touch tone pad to select 1 for YES or 2 for NO Or use the CALLER ID VOLUME w or 4 button to scroll to 1YES or 2NO 4 If you select 1YES press the mute menu OK button HOLD BASE PAGE FOR 5 SECONDS THEN PRESS HANDSET PROGRAM shows in the display Your handset should be held near the base during registration process 5 Press and hold the find button on the base unit the charge in use voicemail indicator flashes Press the handset mute menu OK button
94. tore up to 10 VIP 24 records NOTE This feature ONLY works when the following conditions are met 1 You have subscribed to Caller ID 2 You have your Caller ID record previously transferred to the memory Refer to Storing CID Records in Internal Memory NO USER MEMORY will show in the display to remind the user to do CID record transfer first Storing VIP Melody From the Handset Setup Menu 1 e Press the CALLER ID VOLUME w or 4 button to scroll to VIP MELODY sub menu Press mute menu OK button to select VIP melody feature and then display VIP 1 record If VIP1 does NOT contain any specific number records it will display EMPTY Press CALLER ID VOLUME w or button to select the specific VIP melody memory location 10 VIP locations that does not contain any record Press mute menu OK button to display SELECT MEMORY NOTE If the memory location does not contain any CID memory records and you are trying to mark a specific record as VIP MELODY then SELECT MEMORY will not be displayed Instead NO USER MEMORY will display in prompt to alert the user Press CALLER ID VOLUME or 4 button to view the records from memory to be selected as VIP Press mute menu OK button to confirm and then display VIP MELODY 01 to wait for the melody tone selection Press CALLER ID VOLUME or 4 button to select from melody 01 to melody 10 a testing tone is generated while making melody selection Press mute menu OK button
95. u Set Cycle Time 9 Utilisez le bouton CALLER ID VOLUME ou 4 pour s lectionner Once ou Daily Le param tre par d faut est Once 10 Appuyez sur le bouton mute menu OK pour enregistrer votre s lection Vous entendrez une tonalit de confirmation 22 REMARQUE Si vous s lectionnez Quotidiennement l appareil util isera l heure programm e pour l activation de l alarme Param tres du Combin 1 Assurez vous que le t l phone est D SACTIV pas en mode conversation 2 Appuyez sur le bouton mute menu OK pour aller au menu principal 3 Appuyez sur le bouton CALLER ID VOLUME ou 4 pour afficher HANDSET SETI UP Param tres du Combin 4 Appuyez sur le bouton mute menu OK pour confirmer et pour programmer les param tres suivants Langue Nom du Combin Tonalit de Sonnerie Volume de Sonnerie M lodie VIP Tonalit du Clavier R glage de la Date de l heure galisateur Code R gional Tone Pulse Enregistrement Desenregistrement et Param tres par D faut REMARQUE Pendant la programmation vous pouvez appuyer tout moment sur le bouton END cancel pour quitter le sous menu en cours et revenir au menu Langue Du Menu D installation de Combin 1 App SET 2 App uyez sur le bouton CALLER ID VOLUME w ou 4 pour afficher le sous menu LANGUAGE S lection de la Langue uyez sur le bouton mute menu OK pour ouvrir ce menu Le message SET LANGUAGE 1ENG 2FRA 3ESP S lec
96. ur le combin r cepteur 35 Recherche de Tous les Combin s d un Combin utilisable SEULEMENT avec des combin s suppl mentaires 1 Assurez vous que le t l phone est D SACTIV pas en mode conversation 2 Appuyez sur le bouton delete intercom conf du combin t RECHERCHE POSTE appara t dans l afficheur 3 Utilisez le clavier num rique pour entrer le num ro du combin que vous souhaitez rechercher 1 recherche du combin 1 2 recherche du combin 2 etc et tone tous les combin s 4 Pour annuler la recherche appuyez sur le bouton END cancel delete intercom conf ou TALK sur le combin d origine ou appuyez sur le bouton END cancel sur le combin r cepteur Recherche a Partir de la Base Recherche de Groupe Utilisez la base seulement pour rechercher simultan ment tous les combin s enregistr s 1 Appuyez sur le bouton find de la base Tous les combin s mettent une tonalit pendant deux minutes et le message RECHERCHE DE BASE s affiche sur chacun les combin s 2 Pour annuler la recherche appuyez sur le bouton find de la base ou appuyez sur le bouton TALK ou END cancel sur chacun des combin s Silencieux Utilisez la fonction SILENCIEUX pour converser en priv hors ligne La personne en ligne ne peut vous entendre mais vous pouvez l entendre 1 Appuyez sur le bouton mute menu OK Le combin affiche SILENC ACTIVE 2 Appuyez sur le bouton mute menu OK pour annuler et retourner votre
97. ur le bouton TALK ou SPEAKER du combin d origine pour renvoyer l appel OU Appuyez sur le bouton TALK ou SPEAKER du combin d origine pour renvoyer l appel Si la personne au combin r cepteur ne r pond pas dans les 30 secondes le combin d origine rappelle et affiche RAPPEL Si la personne au combin d origine ne r pond pas dans les 30 secondes l appel est automatiquement coup Afficheur CID IMPORTANT Pour utiliser les dispositifs d identification de visiteur de cet appareil vous devez tre abonn au service d afficheur de nom num ro standard ou ou service d afficheur d appel en attente Pour savoir qui appelle pendant que vous tes au t l phone vous devez tre abonn au service d afficheur d appel en attente Cet appareil recoit et affiche l information transmise par la compagnie de t l phone Cette information peut comprendre le num ro de t l phone la date et l heure Heure Date Nom ro d appel de CID Num ro de t l phone de l appelant Nom de l appelant Afficheur D appel en Attente Dans la mesure o vous tes abonn au service d afficheur d appel en attente offert par la compagnie de telephone si vous recevez un appel d arriv e et vous emplyez la GE fixez multi le syst me la main un signal sonore indique que la presence d une attente d appel invitent la ligne L information d identification de visteur d attente d appel sera montr e et stock dans l histoire de tous les combines
98. ur le bouton TALK ou SPEAKER Quand vous avez termin appuyez de nouveau sur le bouton END cancel pour raccrocher REMARQUE Vous pouvez entrer jusqu 25 chiffres de pr composition REMARQUE Pour supprimer le num ro de pr composition entr appuyez sur le bouton delete intercom conf jusqu ce que tous les chiffres soient effac Appels De R ponse 1 Quand le t l phone sonne appuyez sur le bouton SPEAKER du combin O D crochez le combin et appuyez sur le bouton TALK Quand vous avez termin appuyez de nouveau sur le bouton END cancel pour raccrocher REMARQUE R glez le volume du combin en appuyant sur le bouton CALLER ID VOLUME ou 4 pendant un appel Minuterie D appel Apr s que vous avez appuy sur le bouton TALK ou SPEAKER du combin la minuterie d appel int gr e appara t dans l afficheur et commence le d compte de la dur e de l appel en minutes et en secondes Attente Automatique Si vous d posez le combin sur le socle pendant que le combin est d croch pendant un appel le combin coupe automatiquement la communication 23 Volume de la Sonnerie Acc s Rapide Il y a deux fa ons de r gler le s lecteur de volume de la sonnerie La premi re est la proc dure habituelle telle que d crite dans les menus de Programmation des fonctions de Param tres du combin et de Volume de la sonnerie L autre est un acc s rapide au menu de sonnerie 1 Assurez vous que le t l
99. ute distance fonctionne le combin sur coute ne doit pas reposer sur le socle REMARQUE En mode d coute distance les combin s mettront une tonalit d alerte aux 5 secondes s il y a un appel entrant Vous pouvez appuyer sur le bouton SPEAKER pour quitter le mode d coute distance et prendre l appel REMARQUE En mode d coute distance le combin d coute peut fonctionner avec l couteur du combin en appuyant une fois sur le bouton TALK Revenez en mode haut parleur en appuyant une fois sur le bouton SPEAKER REMARQUE Appuyez sur le bouton END cancel du combin pour mettre fin l coute distance R glage du R veil 1 Assurez vous que le t l phone est D SACTIV pas en mode conversation 2 Appuyez sur le bouton mute menu OK pour aller au menu principal 3 Appuyez sur le bouton CALLER ID VOLUME v ou 4 pour afficher ALARM 4 Appuyez sur le bouton mute menu OK pour entrer le sous menu ALARM 10N 20FF s affiche 5 Utilisez les boutones du combin pour faire une s lection ou utilisez le bouton CALLER ID VOLUME w ou 4 pour s lectionner 1MA ou 2ARRET 6 Sivous choisissez ON appuyez sur le bouton mute menu OK pour confirmer et avancer le sous menu R GLER ALARME 7 Utilisez des touches num riques pour entrer l heure et utilisez touche num rique 2 pour s lectionner AM et touche num rique 7 pour s lectionner PM 8 Appuyez sur le bouton mute menu OK pour confirmer et avancer le sous men
100. what you re looking for GOOG 411 will connect you with the business you choose 3 When finished press END cancel button to hang up At any point in the call Togo back Tostart over When asked for a city and state Toenter city and state e To enter a zip code say go back say start over or press say the full names for example Palo Alto California say it or enter with keypad When asked for business name or category Toenter a business name or category Tospell a business name When given results Tonavigate between results To get more details Toget help 16 say the full names for example Joe s Pizzaria or Pizza press 1 and spell with keypad for example TOYS would be 8697 say or press the listing number say details say help Programming the Telephone Standby Screen The handset displays the handset number and user name 12 18 USER NAME HANDSET X Programming Functions The system uses a menu structure to give you access to all of the built in features You may program the following items in main menu Phonebook Room Monitor Set Alarm Clock and Handset Setup Phone Book Each handset can store up to fifty records in phone book for quick dialing each record can contain a maximum of 20 digit numbers and 15 character names Review Records Make sure the phone is OFF not in TALK mode Press the mute menu OK button to go to the m
101. wrong character s or number s 8 Press the mute menu OK button again to save your selection The display shows ADD TEL NUMBER 9 Use the touch tone pad to enter the telephone number up to 20 digits including pauses and press the mute menu button to confirm The records are stored alphabetically in the phonebook Inserting a Pause in the Dialing Sequence of a Stored Number Press the pause button on the handset s touch tone pad to insert a delay in dialing sequence when a pause is needed to wait for a dial tone for example after you dial 9 for an outside line or to wait for a computer access tone Each pause counts as one digit in the dialing sequence S NN qos 18 Edit Records Sch GM JEANS E 8 Make sure the phone is OFF not in TALK model Press the mute menu OK button to go to the main menu Press CALLER ID VOLUME or 4 button to scroll to PHONEBOOK Press mute menu OK button to enter PHONEBOOK menu Use the CALLER ID VOLUME or 4 button to scroll to EDIT RECORDS Press the mute menu OK button to confirm display will show the records Use the CALLER ID VOLUME or 4 button or key in alphabet to move to desired record press mute menu OK button to confirm ENTER NAME shows on the display Repeat Steps 7 through 9 in Add Records section Delete Records Iw Sr En Gams GA Pak Make sure the phone is OFF not in TALK model Press the mute menu OK button to go to the main menu Press CALLE
102. y or electrician as appropriate NOTES This equipment may not be used on coin service provided by the telephone company Interference Information This equipment generates and uses radio frequency energy which may interfere with residential radio and television reception if not properly installed and used in accordance with instructions contained in this manual Reasonable protection against such interference is ensured although there is no guarantee this will not occur in a given installation If interference is suspected and verified by switching this equipment on and off the user is encouraged to try to correct the interference by one or more of the following measures Reorient the radio television receiver s antenna relocate the equipment with respect to the receiver plug the equipment and receiver into separate circuit outlets The user may also wish to consult a qualified radio television technician for additional suggestions This equipment has been fully tested and complies with all limits for Class B computing devices pursuant to part 15 FCC Rules and Regulations Telephone Network Information Should your equipment cause trouble on your line which may harm the telephone network the telephone company where practicable may notify you that temporary discontinuance of service may be required Where prior notice is not practicable and the circumstances warrant such action the telephone company may temporarily discontinue service

Download Pdf Manuals

image

Related Search

Related Contents

Wentronic 51191  + + x1 - Mon Eden  KitchenAid KVUB600DSS Use and Care Manual  User Manual - UTEK TECHNOLOGY(SHENZHEN)  manuel d'utilisation owner's manual    取扱説明書 - M  Indirizzo: Città: Committente: PIANO OPERATIVO DI SICUREZZA  *ミヤビ テンポラリ  Fujitsu LIFEBOOK T935  

Copyright © All rights reserved.
Failed to retrieve file