taladro atornillador 12v ttc271ddh
Contents
1. 247 SAFETY AND OPERATING MANUAL Original instructions 12V DRILL DRIVER TTC271DDH TITAN Congratulations on your purchase of a TITAN power tool from Titan Power Tools UK Ltd We want you to continue getting the best performance from it so this handbook includes information on safety handling and care Please retain this handbook in case you need to refer to any of the information in the future Your TITAN power tool comes with a 24 month guarantee so should it develop a fault within this period contact your retailer GUARANTEE This TITAN product carries a guarantee of 24 months If your product develops a fault within this period you should in the first instance contact the retailer where the item was purchased This guarantee specifically excludes losses caused due to Fair wear and tear Misuse or abuse Lack of routine maintenance Failure of consumable items such as batteries Accidental dammage Cosmetic damage Failure to follow manufacturer s guidelines Loss of use of the goods This guarantee does not affect your statutory rights This guarantee is only valid in the UK For any enquiries relating to the guarantee please refer to your retailer GENERAL SAFETY INSTRUCTIONS WARNING Read all safety warnings designated by the symbol VY and all instructions warnings and instructions may result in electric shock fire and or serious injury ve all warnings and instructions for2. Keep your hair clothing and gloves away from moving parts Loose clothes jewellery or long hair can be caught in moving parts g If devices are provided for the connection of dust extraction and collection facilities ensure these are connected and properly used Use of dust collection can reduce dust related hazards Power tool use and care a Do not force the power tool Use the correct power tool for your application The correct power tool will do the job better and safer at the rate for which it was designed b Do not use the power tool if the switch does not turn it on and off Any power tool that cannot be controlled with the switch is dangerous and must be repaired c Disconnect the plug from the power source and or the battery pack from the power tool before making any adjustments changing accessories or storing power tools Such preventive safety measures reduce the risk of starting the power tool accidentally d Store idle power tools out of the reach of children and do not allow persons unfamiliar with the power tool or these instructions to operate the power tool Power tools are dangerous in the hands of untrained users e Maintain power tools Check for misalignment or binding of moving parts breakage of parts and any other condition that may affect the power tool s operation If damaged have the power tool repaired before use Many accidents are caused by poorly maintained power tools f Keep cutting tools sharp a
3. 55014 1 2006 A1 2009 EN 55014 2 1997 A1 2001 A2 2008 EN 61000 3 2 2006 EN 61000 3 3 2008 Authorised signatory and technical file holder Date 07 07 2010 Signature Pada Name title Peter Harries Quality Manager Titan Power Tools UK Ltd Trade House Mead Avenue BA22 8RT 12V DRILL DRIVER TTC271DDH
4. Do not burn P 1 5 hour charging time 1 5h LU Before charging read the instructions 12V DRILL DRIVER TTC271DDH Keyless chuck Variable torque Forward lock reverse rotation ON OFF switch with variable speed control Battery pack Battery pack release button YIO ATO ni LED light Battery indicator a TECHNICAL DATA Voltage 12V Speed 0 600 min Maximum capacity of the chuck 10mm Drilling Capacity Wood 15mm Steel 10mm Machine weight 1 7kg Charger Charger model TTB305CHR Input 230V 50Hz 48W Output 12V 2 1A Battery Battery model TTC301BAT NOISE DATA E Pc id A weighted sound pressure 62 9dB A KpA 3dB A A weighted sound power 73 9dB A KwA 3dB A Wear ear protection when sound pressure is over 80dB ACCESSORIES 1 5Ah Ni Cd battery pack 2pcs Double ended screwdriver bit 1pc 1 5 hour charger 1pc 12V DRILL DRIVER TTC271DDH OPERATIONS INSTRUCTIONS Note Before using the tool read the instruction Ww book carefully INTENDED USE This cordless drill driver shall be used for drilling metal or wood or similar materials and screw driving Other uses for the tool will lead to the damage of the tool and a series of dangers to the operator This tool is intended for DIY home use or occasional professional use BEFORE USING YOUR CORDLESS DRILL Your battery pack is UNCHARGED and you must charge once befo
5. circumstances To turn on the light simply press the on off switch When you release the on off switch the light will be off WARNING The light is a focussed beam and should never be pointed directly into the eyes of people or animal TROUBLESHOOTING 1 WHY DOES THE DRILL NOT TURN ON WHEN YOU PRESS THE SWITCH The forward and reverse switch which is on top of the trigger is positioned in the lock function Unlock the forward and reverse switch putting it into the required rotation position Push the trigger and the drill will start to rotate 2 THE DRILL STOPS BEFORE THE SCREW IS COMPLETELY TIGHTENED WHY Verify the torque position of the variable clutch you can find the variable clutch between the chuck and the drill body Position 1 is the lowest torque screw driving force and position 15 is the highest torque screw driving force The position on the drilling mark is for drill operation Regulate the variable clutch to a higher position to reach the best result Recharge battery if the drill suddenly stalls or rotates intermittently 3 1 CANNOT FIT THE BATTERY INTO THE BATTERY CHARGER WHY The battery can be inserted into the charger only in one direction Turn the battery around until it can be inserted into the slot the red LED light should turn on when the battery is charging 4 REASONS FOR DIFFERENT CHARGING TIMES Your charge time can be affected by many reasons which are not defects in your product I
6. for outdoor use Use of a cord suitable for outdoor use reduces the risk of electric shock f If operating a power tool in a damp location is unavoidable use a residual current device RCD protected supply Use of an RCD reduces the risk of electric shock 3 Personal safety a Stay alert watch what you are doing and use common sense when operating a power tool Do not use a power tool while you are tired or under the influence of drugs alcohol or medication A moment of inattention while operating power tools may result in serious personal injury b Use personal protective equipment Always wear eye protection Protective equipment such as dust mask non skid safety shoes hard hat or hearing protection used for appropriate conditions will reduce personal injuries c Prevent unintentional starting Ensure the switch is in the off position before connecting to power source and or battery pack picking up or carrying the tool Carrying power tools with your finger on the switch or energising power tools that have the switch on invites accidents 12V DRILL DRIVER TTC271DDH d Remove any adjusting key or wrench before turning the power tool on A wrench or a key left attached to a rotating part of the power tool may result in personal injury e Do not overreach Keep proper footing and balance at all times This enables better control of the power tool in unexpected situations f Dress properly Do not wear loose clothing or jewellery
7. future reference The term power tool in the warnings refers to your mains operated corded power tool or battery operated cordless power tool EN WARNING Read all safety warnings and all instructions Failure to follow the a 1 Work area safety a Keep work area clean and well lit Cluttered or dark areas invite accidents b Do not operate power tools in explosive atmospheres such as in the presence of flammable liquids gases or dust Power tools create sparks which may ignite the dust or fumes c Keep children and bystanders away while operating a power tool Distractions can cause you to lose control 2 Electrical safety a Power tool plugs must match the outlet Never modify the plug in any way Do not use any adapter plugs with earthed grounded power tools Unmodified plugs and matching outlets will reduce risk of electric shock b Avoid body contact with earthed or grounded surfaces such as pipes radiators ranges and refrigerators There is an increased risk of electric shock if your body is earthed or grounded c Do not expose power tools to rain or wet conditions Water entering a power tool will increase the risk of electric shock d Do not abuse the cord Never use the cord for carrying pulling or unplugging the power tool Keep cord away from heat oil sharp edges or moving parts Damaged or entangled cords increase the risk of electric shock e When operating a power tool outdoors use an extension cord suitable
8. ETY INSTRUCTIONS FOR YOUR DRILL DRIVER FOR DRILL 1 Wear ear protection with cordless drill Exposure to noise can cause hearing loss 2 Hold tool by insulated gripping surfaces when performing an operation where the drill bit tool may contact hidden wiring Contact with a live wire will also make exposed metal parts of the tool live and shock the operator 3 Remove the battery pack from the drill before carrying out adjustments 4 Do not expose to rain or water 5 Do not store the battery pack in temperatures over 40 C 6 Always charge the battery pack between temperatures 0 C to 30 C Ideal charging temperature is 18 C to 24 C 7 Only use the charger and the battery pack provided no other battery is suitable 8 Avoid short circuit of the battery pack connections screws amp nails 9 Do not incinerate or burn the battery pack it may explode 10 Do not charge a damaged battery pack 11 Replace any damaged supply cords on your charger 12 Always disconnect the charger power supply before making or breaking the connections to the battery pack 13 Your battery pack and charger will be warm during charging this is normal 14 When not in use remove a charged battery pack from the charger 15 Always remove the battery pack from the charger immediately after re charging is completed 16 Your drill and battery pack will be warm when working this is normal 17 Do not dispose of batteries in fire or with
9. eck the voltage given on your charger matches the supply voltage The charger is supplied with a fitted plug however if you should need to fit a new plug follows the instruction below IMPORTANT The wire in the mains lead are coloured in accordance with the following code Blue Neutral Brown Live The wire that is coloured blue must be connected to the terminal that is marked with the letter M The wire that is coloured brown must be connected to the terminal that is marked with the letter L A 13 AMP BS1363 or BS1363 A plug must be used and a 5 AMP fuse must be fitted BLUE odd N NEUTRAL BROWN L LIVE OUTER SLEEVE CABLE GRIP TITAN Declaration of Conformity We Importer Titan Power Tools UK Ltd Trade house Mead Avenue BA22 8RT Declare that the product Designation 12V DRILL DRIVER Model TTC271DDH Complies with the following Directives 2004 108 EC Electromagnetic Compatibility Directive 2006 42 EC Machinery Directive 2006 95 EC Low Voltage Directive 2002 95 EC Restrictions of the Use of Certain Hazardous Substances in Electrical and Electronic Equipment 2002 96 EC and 2003 108 EC Waste Electrical and Electronic Equipment WEEE Standards and technical specifications referred to EN 60745 1 2009 EN 60745 2 1 2003 A11 2007 A12 2009 A1 2009 EN 60745 2 2 2003 A11 2007 A12 2009 A1 2009 EN 60335 1 2002 A1 2004 A11 2004 A12 2006 A2 2006 A13 2008 EN 60335 2 29 2004 EN 62233 2008 EN
10. emove battery from charger when the charging is complete 9 Only use the battery charger and battery stated in this manual FOR BATTERY 1 Always remove the battery pack from the charger immediately after re charging is completed 2 When not in use remove a charged battery pack from the charger 3 Do not charge a damaged battery pack 4 Do not charge non rechargeable batteries 5 Do not install the battery backwards so the polarity is reversed 6 Do not connect the positive terminal and negative terminal of the battery to each other with any metal object such as wire 7 Do not carry or store battery together with necklaces hairpins or other metal objects 8 Do not pierce the battery with nails strike the battery with a hammer step on the battery or otherwise subject it to strong impacts or shocks 9 Do not solder directly onto the battery 10 Do not expose battery to water or salt water or allow the battery to get wet 11 Do not disassemble or modify the battery The battery contains safety and protection devices which if damaged may cause the battery to generate heat explode or ignite The protection circuit module provided with battery packs is not to be used as a substitute for a shut off switch 12 Do not place the battery in or near fire on stoves or other high temperature locations Do not place the battery in direct sunlight or use or store the battery inside cars in hot weather Heating the battery can damage
11. f the battery pack is only partly discharged it may be re charged in less than 1 hour If the battery pack and ambient temperature are very cold then recharging may take 1 to 1 1 2 hours If the battery pack is very hot it will not re charge because the internal temperature safety cutout will prevent it If the battery pack is very hot you must remove your battery pack from the charger and allow your battery pack to cool first to ambient temperature and then recharging can be started If you charge a second battery pack immediately after the first then the charger can be overheated Always allow at least 15 minutes rest between battery pack charging 12V DRILL DRIVER TTC271DDH 5 REASONS FOR DIFFERENT BATTERY PACK WORKING TIMES Charging time issues as above and having not used a battery pack for a prolonged time will reduce the working life of the battery pack This can be corrected after several charge and discharge operations by charging amp working with your drill Heavy working conditions such as large screws into hard wood will use up the battery pack energy faster than lighter working conditions Do not re charge your battery pack below 0 C and above 30 C as this will affect performance DISPOSAL OF AN EXHAUSTED BATTERY PACK To preserve natural resources please recycle or dispose of the battery pack properly This battery pack contains NI CD batteries Consult your local waste authority for information regarding a
12. household waste Return exhausted batteries to your local collection or recycling point 18 Always check walls floors and ceilings for hidden power cables and pipes 19 Accessories and metal parts can become very hot FOR CHARGER 1 This appliance is not intended for use by persons including children with reduced physical sensory or mental capabilities or lack of experience and knowledge unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety Children should be supervised to ensure that they do not play with the appliance 2 Charger is double insulated for additional electrical safety 3 Charger is for indoor use only 4 If the charger supply cord is damaged it must be replaced by the manufacturer its service agent or similarly qualified persons in order to avoid a hazard 5 Never charge damaged batteries as these can short circuit and over heat 12V DRILL DRIVER TTC271DDH 6 When the charger is in use it MUST be supervised if there is any evidence of overheating then IMMEDIATELY disconnect the charger from the power supply 7 f gas or smoke is emitted from the battery during charging switch off the power supply and move to a well vented area to allow the fumes to vent to atmosphere Caution is there is leaking liquid from the battery wear protective clothing glasses and clothes as this can be acidic 8 Always disconnect battery charger and r
13. nd clean Properly maintained cutting tools with sharp cutting edges are less likely to bind and are easier to control g Use the power tool accessories and tool bits etc in accordance with these instructions taking into account the working conditions and the work to be performed Use of the power tool for operations different from those intended could result in a hazardous situation Battery tool use and care a Recharge only with the charger specified by the manufacturer A charger that is suitable for one type of battery pack may create a risk of fire when used with another battery pack b Use power tools only with specifically designated battery packs Use of any other battery packs may create a risk of injury and fire c When battery pack is not in use keep it away from other metal objects like paper clips coins keys nails screws or other small metal objects that can make a connection from one terminal to another Shorting the battery terminals together may cause burns or a fire d Under abusive conditions liquid may be ejected from the battery avoid contact If contact accidentally occurs flush with water If liquid contacts eyes additionally seek medical help Liquid ejected from the battery may cause irritation or burns 6 Service a Have your power tool serviced by a qualified repair person using only identical replacement parts This will ensure that the safety of the power tool is maintained ADDITIONAL SAF
14. nd keep well lubricated where appropriate Avoid using tools in temperatures of 10 C or less Plan your work schedule to spread any high vibration tool use across a number of days Health Surveillance All employees should be part of an employer s health surveillance scheme to help identity any vibration related diseases at an early stage prevent disease progression and help employees stay in work Double insulation E The charger is double insulated This means that all the external metal parts are electrically insulated from the mains power supply This is done by placing insulation barriers between the electrical and mechanical components making it unnecessary for the tool to be earthed Important note Be sure the supply is the same as the voltage given on the rating plate for the charger The charger is fitted with a two core cable and plug Remove the mains plug from socket before carrying out any adjustment or servicing SYMBOLS rN X A To reduce the risk of injury user must read instruction manual Warning Waste electrical products should not be disposed of with household waste Please recycle where facilities exist Check with your Local Authority or retailer for recycling advice Wear ear protection Wear eye protection Wear dust mask Double insulation Conformity to CE directive 3 Always charge the battery pack between temperatures 0 C to 30 C Indoor use only Do not expose to rain or water
15. re the release button on battery pack snaps in place and the battery pack is secured in tool before beginning operation OPERATIONS INSTRUCTIONS 1 ON OFF SWITCH amp VARIABLE SPEED CONTROL Fig 3 Depress to start and release to stop your drill The on off Switch is fitted with a brake function which stops your chuck immediately when you quickly release the switch The variable speed control enables you to select the best speed for a particular job The further you squeeze the control the fast the drill will operate Warning Do not operate for long periods at low speed because excess heat will be produced internally 2 FORWARD REVERSE SWITCH amp SWITCH LOCK Fig 3 The switch trigger can be locked in the OFF position This helps to reduce the possibility of accidental starting when not in use To lock the switch trigger place the direction of rotation selector 3 in the centre position For drilling and screw driving use forward rotation lever is moved to the left Only use reverse rotation lever is moved to the right to remove screws or release a jammed drill bit Warning Never change the direction of rotation when the chuck is rotating Wait until it has stopped 3 CHUCK ADJUSTMENT Fig 4 To open the chuck jaws rotate the front section of the chuck Insert the drill bit between the chuck jaws and rotate the front section in the opposite direction Ensure the drill bit is in the center of the chuck jaws Finally fi
16. re use When you charge the new battery or one which has not been used for long periods of time it may not reach full charge until after you have discharged it fully in use and recharge it several times WARNING The charger and battery pack are specifically designed to work together so do not attempt to use any other devices Never insert or allow metallic objects into your charger or battery pack connections because an electrical failure and hazard will occur 1 TO CHARGE THE BATTERY PACK Fig 1 Insert the charger plug into a suitable mains socket The power indicator green will illuminate Insert the battery pack into the charger Then green light will switch off while the red light will illuminate to indicate that charging is taking place When fully charged the red light will go out while the green light switches back on Unplug the charger and remove the battery pack Warning When battery charge runs out after continuously use or exposure to direct sunlight or heat allow time for the tool to cool down before re charging to achieve the full charge 2 TO REMOVE OR INSTALL BATTERY PACK Fig 2 To remove the battery pack 5 from the tool firmly press and hold in the battery pack release button 6 and slide the battery pack out of the tool To install the battery pack align raised rib on battery pack with groove inside tool slide the battery pack fully onto the tool until the battery pack clicks into position Make su
17. rmly rotate the front chuck section in the opposite directions Your drill bit is now clamped in the chuck 4 TORQUE ADJUSTMENT Fig 5 Screw driving force of your drill driver The torque is adjusted by rotating the torque adjustment ring 2 The torque is greater when the torque adjustment ring is set on a higher setting The torque is less when the torque adjustment ring is set on a lower setting Make the setting as follows 1 low setting e g small screws soft materials 15 high setting e g large screws hard materials g for heavy drilling 12V DRILL DRIVER Fig 3 Fig 4 TTC271DDH Ii 5 DRILLING When drilling hard smooth surfaces use a centre punch to mark the desired hole location This will prevent the drill bit from slipping off centre as the hole is started Hold the tool firmly and place the tip of the bit at the point to be drilled Depress the switch trigger to start the tool Move the drill bit into the work piece applying only enough pressure to keep the bit drilling Do not force or apply side pressure to elongate a hole WARNING When drilling in metal only use HSS drill bits in good condition Always use a magnetic bit holder when using short screwdriver bits When screw driving apply a small quantity of liquid soap or similar to the screw threads to ease insertion 6 USING THE LED WORK LIGHT Fig 6 The LED work light allows you to keep a clear view under less illuminated
18. the safety circuitry which can cause additional heating rupture or ignition of the battery Using the battery in this manner may also result in a loss of performance and a shortened life expectancy 13 Do not place the battery in microwave ovens high pressure containers or on induction cookware 14 If you intend to store a battery for a period without use then store battery at room temperature 19 C to 25 C charged to about 30 50 of capacity When storing for very long periods boost charge the battery once per year to prevent over discharge 15 Always charge the battery in a temperature range of 0 C to 30 C 16 The battery pack and charger will be warm during charging this is normal 17 Do not continue charging the battery if it does not recharge within the specified charging time Doing so may cause the battery to become hot explode or ignite The temperature range over which the battery can be charged is 0 C to 30 C Charging the battery at temperatures outside this range may cause severe damage to the battery or reduce battery life expectancy 18 When the battery is worn out insulate the terminals with adhesive tape or similar materials before disposal 19 Do not dispose of batteries in fire or with household waste Return exhausted batteries to your local collection or recycling point WARNING Some dust particles created by power sanding sawing grinding drilling and other construction jobs contain chemicals kno
19. ult and the HSE website has further information The declared vibration emission been measured in accordance with a standardised test stated above and may be used to compare one tool with another The declared vibration emission value may also be used in a preliminary assessment of exposure Warning The vibration emission value during actual use of the power tool can differ from the declared value depending on the ways in which the tool is used dependant on the following examples and other variations on how the tool is used How the tool is used and the materials being drilled The tool being in good condition and well maintained The use the correct accessory for the tool and ensuring it is sharp and in good condition The tightness of the grip on the handles And the tool is being used as intended by its design and these instructions 12V DRILL DRIVER TTC271DDH This tool may cause hand arm vibration syndrome if its use is not adequately managed Warning identify safety measures to protect the operator that are based on an estimation of exposure in the actual conditions of use taking account of all parts of the operating cycle such as the times when the tool is switched off and when it is running idle in addition to the trigger time Note The use of other tools will reduce the users total working period on this tool Helping to minimise your vibration exposure risk Maintain this tool in accordance with these instructions a
20. vailable recycling and or disposal options Discharge your battery pack by operating your drill then remove the battery pack from the drill housing and cover the battery pack connections with heavy duty adhesive tape to prevent short circuit and energy discharge Do not attempt to open or remove any of the components MAINTENANCE Remove battery from the tool and the plug from the socket before carrying out any adjustment servicing or maintenance Your power tool requires no additional lubrication or maintenance There are no user serviceable parts in your power tool Never use water or chemical cleaners to clean your power tool Wipe clean with a dry cloth Always store your power tool in a dry place Keep the motor ventilation slots clean Keep all working controls free of dust Occasionally you may see sparks through the ventilation slots This is normal If the supply cord of the charger is damaged it must be replaced by the manufacturer its service agent or similarly qualified persons in order to avoid a hazard ENVIRONMENTAL PROTECTION Waste electrical products should not be disposed of with household waste Please mmm X lecycle where facilities exist Check with your Local Authority or retailer for recycling advice For further information visit www recyclemore co uk 12V DRILL DRIVER TTC271DDH UK PLUG REPLACEMENT The fuse in the main plug of your charger should always be replaced with one of identical rating Ch
21. wn to cause cancer birth defects or other reproductive harm Some examples of these chemicals are Lead from lead based paints Crystalline silica from bricks and cement and other masonry products Arsenic and chromium from chemically treated timber Your risk form these exposures varies depending upon how often you do this type of work To reduce your exposure to these chemicals Work in a well ventilated area Work with approved safety equipment such as those dust masks that specially designed to filter out microscopic particles and use the dust extraction facility at all time VIBRATION The European Physical Agents Vibration Directive has been brought in to help reduce hand arm vibration syndrome injuries to power tool users The directive requires power tool manufacturers and suppliers to provide indicative vibration test results to enable users to make informed decisions as to the period of time a power tool can be used safely on a daily basis and the choice of tool Further Advice can be found at www hse gov uk Vibration total values triax vector sum determined according to EN 60745 Vibration for drilling into metal a p 2 336m s Drilling amp Screwdriving Vibration for screwdriving a 0 672m s Uncertainty K 1 5m s The declared vibration emission value should be used as a minimum level and should be used with the current guidance on vibration Calculating the actual period of the actual period off use can be diffic
Download Pdf Manuals
Related Search