メディアセット時の注意事項 - mimaki engineering co., ltd.
Contents
1. 40mm ax XT 1 PHBL D2027 18 12 27082014 IT 2014 MIMAKI ENGINEERING CO LTD Allright reserved PWET MIMAKI Note for Media Setting Note for setting roll media or leaf media on Setting a media in Operation Manual Chapter 2 is described below Read this and fully understand and then set media correctly Wrong setting of media could break the head 1 Set media so as not to tilt Roll media Operation Manual P 2 7 Step8 9 Pull a roll media out softly until the media is locked lightly On the locked position pull some places of the media lightly and pull it out evenly When pulling the media do not unlock After2. checking push the clamp lever down 2 Check the position of media press Roll media Operation Manual P 2 7 Step11 Leaf media Operation Manual P 2 10 When the media is correctly set the media press on the right is set as the figure below could break the head e lffamedia is misaligned to the right left more than fixed position a error message MEDIA SET POSITION R or MEDIA SET POSITION L is displayed Set the media again Set the media on the black part of the platen so that it comes out approximately 40mm If it is shorter than that it may not be able to perform the media detection A Do not set the media rightward of the slit line in the platen As media may tilt and be lifted it D202718 12 27082014 IT 2014 MIMAKI ENGINEERING CO LTD Allright reserved PWET
3. MIMAKI 2 A 1 P2 7 8 9 2 P2 7 11 P2 10
Download Pdf Manuals
Related Search