MILTOL リバーシブルマウントプレート KF-RM 取扱説明書
Contents
1. 4 5 24 42. 200 75 30 75 10 J e U1 4 20 U1 4 20 E MILTOL MILTOL
3. l MILTOL AR
4. MILTOL SRR
5. BAm U1 4 4 EMER 170g MILTOL Reversible Mount Plate Instructions Thank you very much for purchasing Kenko s MILTOL Reversible Mount Plate Be sure to read these instructions carefully before use and use the product correctly Also be sure to keep these instructions in a safe place Safety Precautions For safety be sure to read before use To use this product safely be sure to read the following items before use and use the product correctly The following describes how to use this product correctly and prevent injury to yourself or other people or damage to property N Caution If these instructions are not followed and the product is handled incorrectly there is a risk of injury to people or damage to property e Do not drop the reversible mount plate or hit it against other objects If the installation surface is deformed it will not be completely secured when installed on the product and the product may fall off Be sure to also read the instructions for the MILTOL lens telescope to be used or the device to be connected Make sure that the total weight of the plate and the device installed on the plate is within the weigh
6. the mounting screws in the tripod screw holes on the tripod mount of the lens After securing the screws Mounting screw insert the mount into the Arca Swiss platform and secure it using the mounting screws on the platform How to Remove and Install the Mounting Screws The MILTOL Reversible Mount Plate is shipped with 2 mounting screws installed on the plate If required remove these screws before use e Removal There are threads on both ends x of the long holes on the plate Position the mounting screw in the location indicated by xX and while the screw is meshed with the thread turn the screw counterclockwise and remove it e Installation In a location on either end x of the long holes on the plate mesh the screw with the thread and turn the screw clockwise to install it To prevent improper mounting of the product turn the installed mounting screw until it can be moved within the long hole on the reversible mount plate The mounting screws can only be removed and installed in the locations indicated by Be careful not to forcibly turn the screws and damage the threads Specifications m This product reversible mount plate m Supplied items Mounting screw size U1 4 Hexagon bolts 4 Size See figure on left Hexagon wrench 1 Weight 170 g
7. MILTOL MILTOL N 4
8. sing the supplied hexagon bolts to secure the plate Tripod mount When using asa dovetail type Reversible mount plate installation surface Set the plate so that it looks like the figure on the right when viewed from the side e When using the mounting screws Install and secure the mounting screws in the tripod screw holes on the tripod mount of the lens After securing the screws insert the mount into the dovetail groove platform and secure it using the mounting screws on the platform e When using the hexagon bolts First remove the mounting screws from the reversible mount plate See How to Remove and Install the Mounting Screws There are 24 holes with a diameter of 4 5 on the reversible mount plate Match these holes with the holes on the tripod mount of the lens and secure the 4 hexagon bolts using the supplied hexagon wrench After securing the bolts insert the mount into ees the dovetail groove platform and secure it using the mounting screws on the Secure using platform the supplied hexagon wrench Mounting screw m When using as an Arca Swiss type Set the plate so that it looks like the figure on the right when viewed from the side e When using the mounting screws First remove the mounting screws from the reversible mount plate Turn over the mount and then install the screws again See How to Remove and Install the Mounting Screws Install and secure
9. t limit of the stand to be used Fully tighten the screws used to secure the devices to make sure they do not loosen If the screws loosen accidents such as the device falling off may occur and cause injury When used for an equatorial mount adjust the weight according to the weight of the installed devices to ensure the devices are balanced Additional weights sold separately may be required The product specifications design or other information described in these instructions may be changed without prior notice When using this product follow the procedures described in these instructions In particular be sure to observe the instructions described in Safety Precautions We have made every effort to ensure the accuracy of the information in these instructions but if anything is unclear or you find any mistakes or omissions please contact us Kenko is not responsible for any damage loss of profits or third party claims resulting from the inappropriate use of this product Part Names and Sizes View from side 75 30 75 10 15 15 04 5 L Q Babe M5 68 Tong U1 4 20 hole U1 4 20 U1 4 20 U1 4 20 19 186 How to Use The MILTOL Reversible Mount Plate can be turned over for use as a dovetail or Arca Swiss type 2 methods are available for installing the reversible mount plate onto a MILTOL lens using the mounting screws to secure the plate or u
Download Pdf Manuals
Related Search