取扱説明書
Contents
1. Now It introduces the next exposure frame and the next counter number appears in the window Afterthe last exposure continue to operate the film transport lever until the entire film and backing paper are on the take up spool completely And then open the cover and take out the exposed flm earoffthe paper flap on the film box and insert it into the film indicator pocket lt in order to remember the type of the film inside The carrier section of this roll film holder can be mounted in two methods One js that of the transport lever in upper right The other is with the lever in bottom left CAUTION 1 12. 2 ATTACHING Attach the Lens Unit onto the Lens Panel Mount of the camera body Tighten the four Lens Unit Lock Screws securely 1 2 DETACHING Loosen four Lens Unit Lock Screws and detach the Lens Unit IMPORTANT NOTE Before detaching the Lens Unit be sure to insert the Dark Slide
3. ever operate the camera while driving a car which could lead to atraffc accident The SW617 is a precision instrument and should not be exposed to excessive vibration or shock Dont let foreign matter get into the camera Liquids such as water and solid foreign objects can seriously damage the camera Keep the camera out of the reach of infants and small children Avoid operation and or storage at extremely high or low temperatures Long term use or storade In direct sunlight should likewise be avoided Due to potentially high temperatures do not leave the camera in your car for any long periods Avoid exposure to high humidity during use or storage SW
4. 3 1 Push and slide the lock button to 0 direction and lock is released 2 Open the Back Cover and take the carrier out of the Dase 3 Insert a take up spool toward the right spring catch at the bottom Then it will snap back into the spool catch on the upper side Film 5 Spool 4 5 6
5. ATTACHING 1 Push the two Film Holder Unlock Buttons at the bottom of the camera body 2 Attach the Film Holder onto the camera back by aligning the four pins on the Film Holder to the corresponding holes on the camera back 3 Push the two Film Holder Lock Buttons at the top of the camera body to lock 1 SW617 2 SW617 DETACHING 1 Push the two Film Holder Unlock Buttons at the bottom of the camera body 2 Detach the Film Holder from the camera back IMPORTANT NOTE Before detaching the flm holder be sure to insert the Dark Slide ATTACHING DATIACHING LENSUNIT 1
6. TEL 03 6840 3622 FAX 03 6840 3861 2015 5 Kenko Professional Imaging Co Ltd 5 68 10 Nakano Nakano ku Tokyo 164 0001 Japan HORSEMAN is a registered tredemark of Kenko Professional Imaging Tokyo Japan E mail info kenko pi coJp Specifcations are subject to change without notice www kenko pi co jD
7. ATTACHING While pusing down the Finder Shoe Safety Lock by the Finder Shoe slide the View Finder into the Finder Shoe When the Viewfnder is inserted properly the Finder Shoe Safty Lock comes up and locks the Viewfnder DETACHING While pusing down on the Finder Shoe Safety Lock pull the View Finder out View Finder Eye Piece FRONT BACK CAUTION 3m 100 View Finder Frame is designed to be used for the focusing fartherthan approx 3m For focusing at nearer subject finder ratio may exceed 100 and parallax may a
8. 1 If the release lever is operated after only one winding stroke of the transport lever the transport mechanism will be locked Therefore in this case advance the transport lever keeping the release lever all the way to the arrow direction Then you will have again the normal operation after missing only one exposure frame Please do not wind the film advance lever too fast as it may sometimes Ccause improper film interval KPI 164 0001 5 68 10 KT HORSEMAN
9. FRONT Lens Unit Lock Screws Shutter Release Button Cable Release Socket Aperture Setting Lever Lens Guard Shutter Cocking Lever Sync Socket Lens Guard Locking Screws BOTTOM Roll Film Holder CARRIER BASE Take up spool Catcher Spool Pressing Spring Open Window Film Advance Lever Release Lever Counter Window Film Indicator Back Cover Dark Slide Lock Button ATTACHING DATACHING FILM HOLDER 1 2 3
10. 4 Insert a fresh roll film in the left storing place The film must be positioned correctly so that inside Black side of the backing paper faces you Pass the backing paper over the left roller and accross the right roller Position the foremost end of backing paper into the slot of the take up spool 5 Turn the film transport lever until the arrow on the backing paper appears in the open window 6 Putthe carrier back into the back cover 9 Close the cover and lock it 1 1 1 2 3 To transport the winding lever 1 Turn the film advance lever until it stop The frst exposure frame is now in position and the film counter window shows 1 2 After exposure thrust the release lever towards the arrow direction and then wind the lever in about 3 strokes till stops
11. SW Roll Film Holder 617 612 6x 17cm 6x 12cm Nominal Picture Size Actual Picture Size 56 x 168mm 56 x 112mm Exposures Film 3 Film Adovance Stroke 3 times Ratchet advancing available Distance from film surface to plate of lensside 223 x 100 x 50mm 216 x 100 x 50mm Dimensions Weight 730g 570g Special Devices Automatic film counter Film indicator on the cover Combination of two main SW617 sections Base section amp Carrier section SW 617 Lens Unit SW617 HORSEMAN SW 617 Camera Body Type Interchangeable Lens Film Holder Wide angle Camera 120 6 x 17cm 6 x 12cm Format 126 H x 220 W x 62 D mm Dimensions 4 8 mm 550 Weight Schneider Rodenstock Fujinon Super Angulon Super Angulon Super Symmar Apo5Simmer Tele Xenar Gran
12. HORSEMAN SWOT Owner s Manual SW617 INTRODUCTION 3 SPECIFICATIONS 45 NAME OF PARTS 6 ATTACHING DATACHING FILM HOLDER ATTACHING DATACHING LENS UNIT ATTACHING DATACHING VIEWFINDER USING A CENTER FILTER TO LOAD THE ROLL FILM HOLDER Caution Do not attempt to disassemble the camera To avoid damage to the camera do not touch internal components ever direct the camera to the sun or other intense light sources It Could seriously hurt your eyes
13. dagon N ApoSironar T400mmF8 XL 72mm F5 6 XL 90mm F5 6 XL 110mmF5 6 180mmF5 6 250mmLF5 6 90mmF6 8 S180mmF5 6 Lens Construction Closest Focusing Distance Image Circle Filter Diameter Weight NAME OF PARTS SW617 SW617 Body Film Holder Lock Buttons Neck Strap Lugs Front Frame Lens Unit Lock Screw Holes Rubber Grips Finder Shoe Safety Lock Film Holder Holes Finder Shoe Film Holder Unlock Buttons Tripod Socket SIDE BACK BOTTOM Lens Unit
14. lso occur In this case use of optional Ground Glass Back would be recommended USING A CENTER FILTER 3 1 2 When a Center Filter is used Lens Guard should be moved back 3 Tighten the Lens Guard locking Screws securely 1 Loosen two Lens Guard Locking Screws using a coin 2 Slide the Lens Guard backward until it stops When the Center Filter is removed replace the Lens Guard accordingly TO LOAD THE ROLL FILM HOLDER Base Carrier 1 0 2
Download Pdf Manuals
Related Search