Home

Samsung BW1953 راهنمای محصول

1. e Otherwise this may result in fire L3 Do not forcefully bend or pull the power plug and do not place any heavy material on it e Otherwise this may result in fire L3 Do not connect multiple appliances to the same power outlet e Otherwise this may cause fire due to overheating L3 Do not disconnect the power cord while using the product e Otherwise this may result in damage to the product due to electric shock L To disconnect the apparatus from the mains the plug must be pulled out from the mains socket therefore the mains plug shall be readily op erable e This may cause electric shock or fire L3 Use only the power cord provided by our company Do not use the provided power cord of another product e Otherwise this may result in fire or electric shock Be sure to contact an authorized Service Center when installing your monitor in a location with heavy dust high or low temperatures high humidity and exposed to chemical substances and where it operates for 24 hours such as at airports train stations etc Failure to do so may cause serious damage to your monitor L3 Do not drop the monitor when moving it e This may cause damage to the product or the person carrying it A a L3 Ensure that at least two persons lift and move the product e Otherwise it may be dropped and cause personal injury and or dam age the product L3 When installing the product in a cabinet or rack make sure that the f
2. 5i SA MENU RTA h a po u 1 m Ta aec t m LM ME rud E L L SAMSUNG MENU CI GF An Goue AUTO t RTA Response Time Accelerator A function that accelerates the response speed of the panel so as to provide a sharper and more natural video display e Off Model e Mode2 e Off Deactivates the RTA function so that the panel operates at its original response speed e Mode 1 This mode is the optimal mode for watching movies e Mode2 This mode is the optimal mode for still screens such as using a word processor or surfing the internet MENU A A 5 Ga MENU rp Be Ifyou are not watching a movie we recommend setting the mode to RTA Mode 1 or Off 45 Adjusting the Monitor fc Information ccce Pu ial r vie Kein y a EN Wark SAMSUNG MENU CITI G M GX souRc AUTO 5 Shows a video source display mode on the OSD screen MENU 4 Y MENU 46 Troubleshooting Self Test Feature Check E Note Your monitor provides a self test feature that allows you to check whether your monitor is functioning properly Self Test Feature Check 1 Turn off both your computer and the monitor 2 Unplug the video cable from the back of the computer 3 Turn on the monitor If the monitor 1s functioning properly you will see a box in the illustration below Check Signal Cable This box appears during normal operation if the video cable becomes discon
3. Safety Instructions Notational Power Note These safety instructions must be followed to ensure your safety and prevent property damage Make sure to read the instructions carefully and use the product in the correct manner B Warning Caution Otherwise it may result in death or personal injury Otherwise it may result in personal injury or property damage O Notational Conventions Important to read and under Prohibited stand at all times Do not disassemble Disconnect the plug from the outlet Ground to prevent an electric Do not touch Shock oo0 A When not used for extended period of time set your computer to DPM If using screen saver set it to active screen mode The images here are for reference only and are not applicable in all cases or countries Shortcut to Anti Afterimage Instructions 2 TT E e Otherwise this may result in electric shock or fire L3 Do not use a damaged power cord or plug or a damaged or loose power outlet L Do not touch the power plug with wet hands when removing or plug Bt ging the plug into the outlet Q OW Otherwise this may result in electric shock L 3 Make sure to connect the power cord to a grounded power outlet A e Otherwise it may result in electric shock or personal injury Installation Safety Instructions L3 Ensure that the power plug is plugged into the power outlet firmly and correctly
4. Screen Saver Set the function in the BIOS SETUP of the computer Refer to the Windows Computer Man ual Q How can I clean the outer case LCD Panel Disconnect the power cord and then clean the monitor with a soft cloth using either a cleaning solution or plain water Do not leave any detergent or scratches on the case Do not let any water enter the monitor Note Before calling for assistance check the information in this section to see if you can remedy any prob lems yourself If you do need assistance please call the phone number on the Information section or contact your dealer 52 Specifications General General Model Name SyncMaster BW1953 LCD Panel Size 19 inch 48cm Display area 408 24mm H x 255 15 mm V Pixel Pitch 0 2835 mm H x 0 2835 mm V Synchronization Horizontal 30 81 kHz Vertical 56 75 Hz Display Color 16 7M Resolution Optimum resolution 1440 x 900 60 Hz Maximum resolution 1440 x 900 75 Hz Input Signal Terminated RGB Analog DVI Digital Visual Interface Compliant Digital RGB 0 7 Vp p 5 Separate H V sync Composite SOG TTL level V high gt 2 0 V V low x 0 8 V Maximum Pixel Clock 146 MHz Analog Digital Power Supply AC 100 240 V 10 96 50 60 Hz 3 Hz Signal Cable I5pin to 15pin D sub cable Detachable DVI D to DVI D connector Detachable Dimensions W x H x D Weight 445 8 x 310 x 59 6 mm 17 6 x 12 2 x 2 3 inch Without
5. Change the mode to energy save or set a screensaver to move the picture when you need to be away from the monitor for an extended period of time PRODUCT INFORMATION Image Retention Free LCD Monitors and TVs may have image retention when switching from one image to another espe cially after displaying a stationary image for a long time This guide is to demonstrate correct usage of LCD products in order to protect them from Image retention eo Warranty Warranty does not cover any damage caused by image retention Burn in is not covered by the warranty What is Image retention During normal operation ofa LCD panel pixel image retention doesn t occur However if the same image is displayed for a long time a slight difference in electric charge accumu lates between the two electrodes which encase the liquid crystal This may cause the liquid crystal to build up in a certain areas of the display Thus the previous image is retained 56 Information when switching to a new video image All display products including LCD are subject to image retention This is not a product defect Please follow the suggestions below to protect your LCD from image retention a Power Off Screen Saver or Power Save Mode Ex Turn the power off when using a stationary pattern Turn the power off for 4 hours after 20 hours in use Turn the power off for 2 hours after 12 hours in use e Use a Screen saver if possible e Screen saver in one c
6. Unit Hz Example If the same light repeats itself 60 times per second this is regarded as 60 Hz The time to scan one line connecting the right edge to the left edge of the screen horizontally is called the Horizontal Cycle The in verse number of the Horizontal Cycle is called Horizontal Fre quency Unit kHz Showing the horizontal lines of the screen from the top to the bot tom sequentially is called the Non Interlace method while show ing odd lines and then even lines in turn is called the Interlace method The Non Interlace method is used for the majority of monitors to ensure a clear image The Interlace method is the same as that used in TVs This is a function that provides the best quality screen for the user by allowing the computer and the monitor to exchange informa tion automatically This monitor follows the international standard VESA DDC for the Plug amp Play function The number of horizontal and vertical dots used to compose the screen image is called the resolution This number shows the ac curacy of the display A high resolution is good for performing multiple tasks as more image information can be shown on the screen Example If the resolution is 1440 x 900 this means the screen is composed of 1440 horizontal dots horizontal resolution and 900 vertical lines vertical resolution 62 Correct Disposal Appendix Correct Disposal of This Product Waste Electrical amp Electronic Equipment
7. follow the steps below When Windows is XP Control Panel Performance and Maintenance System Hardware Device Manager Monitors After deleting Plug and Play monitor find Plug and Play monitor by searching new Hardware A MagicTune is an additional software for the monitor Some graphic cards may not support your monitor When you have a problem with the graphic card visit our website to check the compatible graphic card list provided http www samsung com monitor magictune 50 Troubleshooting MagicTune doesn t work properly Q Have you changed your PC or video graphic card A Download the latest program The program can be downloaded http www samsung com mon itor magictune Did you install the program Reboot the computer after installing the program for the first time If a copy of the program is already installed remove it reboot the computer and then install the program again You need to reboot the computer for it to operate normally after installing or removing the program Note Visit the MagicTune website and download the installation software for MagicTune MAC Check the following items if there is trouble with the monitor Q amp A Check if the power cord and the video cables are properly connected to the computer Check if the computer beeps more than 3 times when booting If it does request an a service for the main board of the computer If you installed a ne
8. Europe only Authority Applicable in the European Union and other European countries with separate collection systems This marking shown on the product or its literature indi cates that it should not be disposed with other household wastes at the end of its working life To prevent possible harm to the environment or human health from uncontrol led waste disposal please separate this from other types of wastes and recycle it responsibly to promote the sustaina ble reuse of material resources Household users should contact either the retailer where they purchased this product or their local government of fice for details of where and how they can take this item for environmentally safe recycling Business users should contact their supplier and check the terms and conditions of the purchase contract This prod uct should not be mixed with other commercial wastes for disposal Information in this document is subject to change without notice 2008 Samsung Electronics Co Ltd All rights reserved Reproduction in any manner whatsoever without the written permission of Samsung Electronics Co Ltd is strictly forbidden Samsung Electronics Co Ltd shall not be liable for errors contained herein or for incidental or con sequential damages in connection with the furnishing performance or use of this material Samsung is the registered trademark of Samsung Electronics Co Ltd Microsoft Windows and Win do
9. Refresh Rate Unit Hz 55 Information For Better Display Adjust the computer resolution and screen injection rate refresh rate on the computer as described below to enjoy the best picture quality You can have an uneven picture quality on screen if the best picture quality is not provided for TFT LCD e Resolution 1440 x 900 e Vertical frequency refresh rate 60 Hz TFT LCD panels manufactured by using advanced semiconductor technology with a precision of 1ppm one millionth and above is used for this product But the pixels of RED GREEN BLUE and WHITE color seem to be bright sometimes or some of black pixels could be seen This is not from bad quality and you can use it without any problems For example the number of TFT LCD sub pixels contained in this product are 3 888 000 B When cleaning the monitor and the panel outside please apply the recommended small amount of cleaner by using a soft cloth to polish Do not force the LCD area but rub softly If excessive force is applied you may stain it If you are not satisfied with the picture quality you can get better quality of picture by performing the Auto Adjustment function in display screen that is appeared as window termination button is pressed If there s still noise after the automatic adjustment use the Fine Coarse adjustment func tion B When viewing a fixed screen for an extended period of time a residual image or blur riness may appear
10. Stand 445 8 x 359 9 x 188 7 mm 17 6 x 14 2 x 7 4 inch With Stand 3 9 kg 8 6 Ibs VESA Mounting Interface 75 mm x 75 mm 53 Specifications Environmental considerations Operating Temperature 50 F 104 F 10 C 40 C Humidity 10 80 non condensing Storage Temperature 4 F 113 F 20 C 45 C Humidity 5 95 non condensing Plug and Play Capability This monitor can be installed on any Plug amp Play compatible system The interaction of the monitor and the computer systems will provide the best operating conditions and monitor settings In most cases the monitor installation will proceed automatically unless the user wishes to select alternate settings Dot Acceptable TFT LCD panels manufactured by using advanced semiconductor technology with preci sion of 1ppm one millionth above are used for this product But the pixels of RED GREEN BLUE and WHITE color appear to be bright sometimes or some black pixels may be seen This is not from bad quality and you can use it without any problems For example the number of TFT LCD sub pixels contained in this product are 3 888 000 Note Design and specifications are subject to change without prior notice g Class B Equipment Information Communication equipment for residential use This product complies with the Electromagnetic Compatibility Directives for residential use and can be used in all areas including common residenti
11. and pepe preg gea A deve Fas Vor Lele fro tiaara mmm Fes pret dryers bid Lgs ang acd mad eni aite Prae oat ere pct bom a litt of Geeks drani on my coemputer Tis lon ard Chee ond arl disse Pee em park ari E or alnus r arad gl dim ratum r er igar egy gn dem roug Click Have Disk and select the folder for example D Drive where the driver setup file is located and click OK 16 9 Using the Software Spiir the green drier yos ward tari all fer tha hara Tea Pa arch ree irn lah el pnr Pin gen ibt eed Pe ric Poel P Barr dae Fed Diet Fui Bre prism Viral iT Een inn denne Haza Waren Fe ria cp Ta ose om h agree Select the device driver you want to inptall few this hardware ME Ll dal P 2d Rm PII I In IE Tm Mr samsung co MP Sane eee Aiba had aiey upland your deer sofware A a rr Monitor paing Green refresh rate Sa Hertz V pide modes that the monitor cannot depiay Clearing tha check box allews yeu in select dapiry modes that thig mon Cannot display correctly This may lead to an unusable Microsoft Windows XP Operating System 17 Select the model that matches your monitor from the list of monitor models on the screen and click Next Top sunm int in plein Pei eve Fin T upime dra eae banana be ia dec LE Lach ra Pa py AN a Ti uisi fn desi Lr Drag the icons to match your monton TG t VP aD aua ARI V i This i5 my main morior E Zi patend the
12. box Microsoft Windows NT Operating System l 2 Click Start Settings Control Panel and then double click Display icon In Display Registration Information window click Settings Tab and then click All Display Modes Select a mode that you wish to use Resolution Number of colors and Vertical frequency and then click OK Click Apply button if you see the screen working normally after clicking Test If the screen is not normal change to a different mode lower mode of resolution colors or frequency Note If there is no Mode at All Display Modes select the level of resolution and vertical frequency by referring to the Preset Timing Modes in the user guide Linux Operating System To execute X Window you need to make the X86Config file which is a type of system setting file l 2 10 Press Enter at the first and the second screen after executing the X86Config file The third screen is for setting your mouse Set a mouse for your computer The next screen is for selecting a keyboard Set a Keyboard for your computer The next screen is for setting your monitor First of all set a horizontal frequency for your monitor You can enter the frequency directly Set a vertical frequency for your monitor You can enter the frequency directly Enter the model name of your monitor This information will not affect the actual execution of X Window You have finished setting up your moni
13. cM SAMSUNG d b Bs vein rm Ug cat MENU ID F ARF G S AUTO b Reverts the product settings to factory defaults No Yes MENU A a MENU 42 Adjusting the Monitor Customized Key SAMSUNG MENU LID GY A G SOURCE AUTO You can specify a function which will be activated when the Customized Key Lis pressed MENU gt A gt 4 H 4 Y MENU Off Timer SAMSUNG MENU ITD De1 W A GoO souRcE AUTO The monitors will turn off automatically at the specified time Off e On 43 Adjusting the Monitor MENU gt a gt a T i T i Ga F MENU Auto Source Select Auto Source for the monitor to automatically select the signal source Auto e Manual MENU gt A gt 3 Y MENU Image Size SAMSUNG MENU TT e W ARA GASo AUTO o RA p You can change the size of the screen displayed on your monitor 44 Adjusting the Monitor Normal e Wide Normal The screen is displayed in accordance with the screen aspect ratio of the input signals e Wide A full screen is displayed regardless of the screen aspect ratio of the input signals Note e Signals not available in the standard mode table are not supported e Ifthe wide screen which is the optimal resolution for the monitor is set on your PC this function is not performed MENU A 9 A
14. desktop onto the montor Vut quan a Wa US NAT VE VIUERE TTE RE SR a ia ERE T Va R sa Ta RR SE TT a as TT aa Tua T Using the Software 1 Insert CD into the CD ROM drive 2 Click Start Control Panel then click the Appearance and Themes icon w rre Chat cedes i perc m a HET sib S eee E rv rre Bron enl Caphaer e Peay Dercy e ue E Piy Bermek ence Pm ity Bir Pomen E Pepe Pee FAS mre Computer Ww RS Ca Meier Media Player MSH Explorar Low vinde Movie Malur Aj rage cnm L dnd hisp and Support 2 Saar ET Gun 3 Click Display F oippeeere eed Tri W Ua R wem pa W Que O d Lae em T Peleus Sp degenerates a keg ee dee dz E EET F ew rim ie cuoc eo or pick a Control Panel icon 3 Loken PP pabi prii ee ae u ape re la bep ee Bul ame Tale fnm bacsgeege omi Beer Fo Gall inoar rer mm FELD FESTIS me Pel oes Sel ones i Dina Fiap mej Pty biorda curs Me Mrope dli r Sien eneh 5 0 Enku masiy Mone Go az b VOT4 by EXP piha 4 Click the Properties button on the Monitor tab and select Driver tab gro cette Bowen usfawsh vate 60 Hans C Hits madai that this eraociles Garnet display Chee thea chak box aloes qus Lo Pedea ihai haa Magri conecik This lsd katabe copas Dant may bo ah mndi camas bi l 5 1 2001 0 To eei diaii aland Wee alise fea To ondes Mem ccce Hos Muss
15. enter the applicable drive How to delete the Natural Color software program Select Setting Control Panel on the Start menu and then double click Add Delete a program Select Natural Color from the list and then click the Add Delete button MagicTune Magiclune HELP 22 Using the Software Installation 1 Insert the installation CD into the CD ROM drive 2 Click the MagicTune installation file Note If the popup window to install the software for the main screen is not displayed proceed with the installation using the MagicTune executable file on the CD 3 Select installation Language Click Next 4 When the Installation Shield Wizard window appears click Next 5 Select I agree to the terms of the license agreement to accept the terms of use 6 Choose a folder to install the MagicTune program 7 Click Install 8 The Installation Status window appears 9 Click Finish 10 When the installation is complete the MagicTune executable icon appears on your desktop Double click the icon to start the program MagicTune execution icon may not appear depending on specification of computer sys tem or monitor If that happens press F5 Key Installation Problems The installation of MagicTune can be affected by such factors as the video card motherboard and the network environment System Requirements OS e Windows 2000 e Windows XP Home Edition e Windows XP Prof
16. js a registered trademark of Microsoft Corp Other trademarks are property of their respective holders 24 Adjusting the Monitor Direct Functions AUTO SAMSUNG MENU L F Aj Go souRcE AUTO 6 When the AUTO button is pressed the auto adjustment screen appears as shown in the animated screen on the center Auto adjustment allows the monitor to self adjust to the incoming Analog signal The values of Fine Coarse and Position are adjusted automatically Available in Analog mode only Tf auto adjustment does not work properly press AUTO button again to adjust picture with more accuracy Tf you change resolution in the control panel auto function will be executed automatically OSD Lock amp Unlock When pressing the AUTO button after locking the OSD 23 Adjusting the Monitor SAMSUNG MENU LID GY A soue AUTO eo auc MES s SAMSUNG MENU LIT GF A GD SouRCE AUTO This is the function that locks the OSD in order to keep the current states of settings or prevent others from adjusting the current settings Lock Hold down the MENU button for more than five 5 seconds to activate the OSD adjustment lock function Unlock Hold down the MENU button for more than five 5 seconds to deactivate the OSD adjustment lock function 26 Adjusting the Monitor Note Though the OSD adjustment lock function is activated you can still adjust the brightness and contrast and adj
17. with a mixture of images such as texts and graphics Game For watching motion pictures such as a game Sport For watching motion pictures such as a sport Movie For watching motion pictures such as a DVD or Video CD Dynamic Contrast Dynamic Contrast is to automatically detect distribution of inputted visual signal and adjust to create optimum contrast MENU 5 5 a T 9 54 MENU Color Not available in MagicBright mode of Dynamic Contrast 3l Adjusting the Monitor MagicColor SAMSUNG MENU LID GY AR GoSOURCE AUTO b A iy MagicColor is a new technology that Samsung has exclusively developed to improve digital image and to display natural color more clearly without disturbing image quality e Off Returns to the original mode e Demo The screen before applying MagicColor appears on the right and the screen after applying MagicColor appears on the left e Full Displays not only vivid natural color but also more realistic natural skin color with clearness e Intelligent Displays vivid natural color with clearness MENU gt gt 5 5 a MENU 32 Adjusting the Monitor Color Tone SAMSUNG MENU LID GY A Go SOURCE AUTO b The tone of the color can be changed and one of four modes can be selected e Cool Makes whites bluish Normal Keeps whites white Warm Makes whites reddish Custom Select this mode when you want to adjus
18. ENU TD GY mitt ouR AUTO Removes noise such as vertical stripes Coarse adjustment may move the screen image area You may relocate it to the center using the horizontal control menu Available in Analog mode only MENU gt 2 MENU 36 Adjusting the Monitor Fine r inani a WT MN wt e d MENU TI e1 W A GASo AUTO 5 Removes noise such as horizontal stripes If the noise persists even after Fine tuning repeat it after adjusting the frequency clock speed Available in Analog mode only MENU 4 a gt 4 9 MENU Sharpness Changes the clearance of image 37 Adjusting the Monitor Not available in MagicColor mode of Full and Intelligent MENU A gt H 4 4 MENU H Position SAMSUNG MENU TTO G T G S AUTO Changes the horizontal position of the monitor s entire display Available in Analog mode only MENU 5 A gt a MENU V Position fe oa dim i qe y f ge aue SAMSUNG MENU TT e W ARA GASo AUTO 38 Adjusting the Monitor Changes the vertical position of the monitor s entire display Available in Analog mode only MENU A gt H a T gt 5 4 F MENU E osp Language SAM SUNG MENUDO G F A GS souRcE AUTO You can choose one of nine languages English Deutsch Es
19. ake sure to shake it thoroughly before using it L3 When cleaning the product do not spray water directly onto the main body of the product e Ensure that water does not enter the product and that it is not wet e Otherwise this may result in electric shock fire or a malfunction L3 The product is a high voltage product Ensure that users do not disas semble repair or modify the product themselves e Otherwise this may result in electric shock or fire If the product needs to be repaired contact a Service Center L3 If there is a strange smell or a strange sound or smoke is coming from the product disconnect the power plug immediately and contact a Service Center e Otherwise this may result in electric shock or fire L3 Do not place this product in a location exposed to moisture dust smoke water or in a car e Otherwise this may result in electric shock or fire amp o X d Safety Instructions L3 When you drop the product or the case is broken turn the power off and disconnect the power cord Contact a Service Center e Otherwise this may result in electric shock or fire L3 If thunder or lightening is occurring do not touch the power cord or antenna cable e Otherwise this may result in electric shock or fire L Do not try to move the monitor by pulling only the wire or the signal cable e Otherwise it may fall and result in electric shock damage to the product or fire due t
20. al areas Class B equipment emits less electromagnetic waves than Class A equipment PowerSaver This monitor has a built in power management system called PowerSaver This system saves energy by switching your monitor to low power mode when it has not been used for a certain amount of time The monitor automatically returns to normal operation when you press a key on the keyboard For energy conservation turn your monitor OFF when it 1s not needed or when leaving it unattended for long periods The PowerSaver system operates with a VESA DPM compliant video card installed in your computer Use the software utility installed on your computer to set up this feature State Normal Operation Power saving mode Power off Power button EPA ENERGY 2000 Power Indicator Blue Blue blinking Off Power Consump 34 watts Less thanl watts Less than 1 watts tion This monitor is EPA ENERGY STAR compliant and EN ERGY2000 compliant when used with a computer equipped with VESA DPM functionality Asan ENERGY STAR Partner SAMSUNG has determined ENERGY STAR that this product meets the ENERGY STAR guidelines for energy efficiency 54 Specifications Preset Timing Modes If the signal transferred from the computer is the same as the following Preset Timing Modes the screen will be adjusted automatically However if the signal differs the screen may go blank while the power LED is on Refer to the video card manual and adjusts the screen as fo
21. an use the on screen menus to change the brightness according to personal preference MENU gt H 5 a MENU Contrast Not available in MagicBright mode of Dynamic Contrast 29 Adjusting the Monitor s T TE gr DA Wii j mc ui i r we TE y Ee 9 E aum id go E E n T SAMSUNG MENU LID GY A Go SoURCE AUTO b P You can use the on screen menus to change the contrast according to personal preference Not available in MagicColor mode of Full and Intelligent MENU gt gt a Y MENU MagicBright x misa TE na T ap A x d eff Ht ai We L miae wi SAMSUNG Push the Cel button to circle through available preconfigured modes MagicBright is a new feature providing optimum viewing environment depending on the contents of the image you are watching Currently seven different modes are available Custom Text Internet 30 Adjusting the Monitor Game Sport Movie and Dynamic Contrast Each mode has its own pre configured brightness value You can easily select one of seven settings by simply pressing Customized Key control button Custom Although the values are carefully chosen by our engineers the pre configured values may not be comfortable to your eyes depending on your taste If this is the case adjust the brightness and contrast by using the OSD menu Text For documentations or works involving heavy text Internet For working
22. ct the signal cable to the 15 pin D sub port on the back of your monitor EZ Using the DVI Digital connector on the video card Connect the DVI Cable to the DVI IN Port on the back of your Monitor EE Connected to a Macintosh e Connect the monitor to the Macintosh computer using the D sub connection cable Note If the monitor and the computer are connected you can turn them on and use them Using the Stand Monitor Assembly 12 Connections Monitor and Bottom Attaching a Base This monitor accepts a 75 mm x 75 mm VESA compliant mounting interface pad A Monitor B Mounting interface pad Sold separately 1 Turn off your monitor and unplug its power cord 2 Lay the LCD monitor face down on a flat surface with a cushion beneath it to protect the screen 3 Remove the stand 4 Align the mounting interface pad with the holes in the rear cover mounting pad and secure it with four screws that came with the arm type base wall mount hanger or other base Do not use screws longer than the standard dimension as they may damage the inside of the Monitor For wall mounts that do not comply with VESA standard screw specifications the length of the screws may differ depending on their specifications Do not use screws that do not comply with the VESA standard screw specifica tions Do not fasten the screws too tightly as this may damage the product or cause the product to fall lea
23. dia yio I tie exten fale after utdata ie diver ul buck bo Fee quens by event To oninia ail uem kee bho eem Bes Gack Cove 7 jJ Devige ananas This elemen ja surabonugg popari ll pou ann peoblems eath tes divica click Trcubleshoot to whew Hrs rca oer LL thun hono enun Welcome to the Hardware Update Wizard Plug and Play Mordor If pow heacdeese came wilh an mstalistion CD i ii Mopp disk imnceil ih niw what do pou mami the wired In do E E T e a a x E Dik Het In continue cees ge 6 Select Don t search I will then click Next and then click Have disk 18 Using the Software Hardware Update Wizard Please chocrgs pma poarch and inztallalism nplianz C Seach bor the best diva in Pese ocat Woe this chick Expanet beiga fo iml oi dopar tha del pul saich ahah mokait bral pathi acad eiiiai ueri T bas bett dere Lond voll be ral ales 2 Dont search 1 will choose the drva bo natali Choose His option io select the device drea homa li Window does mot gusan es Hit Wes derer posa chops vell bs ha bert match For your hides Nardware Update Wizard Taksi the devine diver pou want ba inalall les his hardware E 9 Hite gormpahbla Pucana S elect the rra f acfuer ane madal of pour hides daaa and then chek Hasi IE yea hare dak that contusa they disas gon want bo natal click Hawe Duk Model S Pag and Play Honba E That dei it ab irll Taima wire crest m
24. ding to personal injury Samsung is not liable for these kinds of accidents Samsung is not liable for product damage or personal injury when a non VESA or non specified wall mount is used or the consumer fails to follow the product installation instructions To mount the monitor on a wall you should purchase the wall mounting kit that allows you to mount the monitor at least 10 cm away from the wall surface Contact the nearest Samsung Service Center for more information Samsung Electronics will not be responsible for damages caused by using a base other than those specified Please use Wall Mount according to the International standards 13 Using the Software Monitor Driver Note When prompted by the operating system for the monitor driver insert the CD ROM included with this monitor Driver installation is slightly different from one operating system to another Follow the directions appropriate for the operating system you have Prepare a blank disk and download the driver program file at the Internet web site shown here Internet web site http www samsung com Worldwide Installing the Monitor Driver Automatic 1 Insert CD into the CD ROM drive 2 Click Windows 3 Choose your monitor model in the model list then click the OK button Sum SAMSUNG moniter metaller select the mordar which you wert bo inal 4 Ifyou can see following message window then click the Continue Anyway button The
25. dis connect and then reconnect the DVI cable while the system is running as certain types of graphic cards do not send out video signals Connect the DVI cable and then reboot the system cannot see the On Screen Display Q A Have you locked the On Screen Display OSD Menu to prevent changes Unlock the OSD by pressing the MENU II button for at least 5 seconds The screen shows strange colors or just black and white Q A A Q Is the screen displaying only one color as if looking at the screen through a cellophane paper Check the signal cable connection Make sure the video card is fully inserted in its slot Have the screen colors become strange after running a program or due to a crash between ap plications Reboot the computer Has the video card been set properly Set the video card by referring to the video card manual The screen suddenly has become unbalanced Q A Q A Have you changed the video card or the driver Adjust screen image position and size using the OSD Have you adjusted the resolution or frequency to the monitor Adjust the resolution and frequency at the video card Refer to the Preset Timing Modes The screen can be unbalanced due to the cycle of the video card signals Readjust Position by referring to the OSD 49 Troubleshooting The screen is out of focus or OSD cannot be adjusted Q Have you adjusted the resolution or frequency on the monitor A Adjust th
26. e resolution and frequency of the video card Refer to the Preset Timing Modes LED is blinking but no images on the screen Q Isthe frequency properly adjusted when checking the Display Timing on the menu A Adjust the frequency properly by referring to the video card manual and the Preset Timing Modes The maximum frequency per resolution may differ from product to product There are only 16 colors shown on the screen The screen colors have changed after changing the video card Q Have the Windows colors been set properly A Windows XP Set the resolution at the Control Panel Appearance and Themes Display Settings A Windows ME 2000 Set the resolution at the Control Panel Display Settings Q Hasthe video card been set properly A Setthe video card by referring to the video card manual There is a message that reads Unrecognized monitor Plug amp Play VE SA DDC monitor found Q Have you installed the monitor driver A Install the monitor driver according to the Driver Installation Instructions Q Seethe video card manual to see if the Plug amp Play VESA DDC function can be supported A Install the monitor driver according to the Driver Installation Instructions Check when MagicTune does not function properly Q MagicTune M feature is found only on PC VGA with Window OS that supports Plug and Play A To check whether your PC is available for MagicTune feature
27. ed on Samsung Monitor homepage http www samsung com Click the Close button then click OK button continually Hardware Update Wizard Completing the Hardware Update Wizard Tha vazad hart hraihed ribalkrsg the zofheana fot a Sarigung awa het Fah do cipi the vated 19 pa Danma Diisi Samsung eee Dupas Props Durs Daba Dees neni cni Coia kpa Bampira 3 142001 1 0 0 0 H ok digia magic To vio datali abau Hha dire Flex s E Tar mr Bot Back Dries ume To update tes creer Hos tus cese ii tho dasen Fadz altar the hha ro bach bo ihe pier mibale cree To umia ha di bareel ce 10 Using the Software Plog and Play Monitor and A Prophet WP roporiies Monitor driver installation is completed Microsoft Windows 2000 Operating System When you can see Digital Signature Not Found on your monitor follow these steps l 2 3 Choose OK button on the Insert disk window Click the Browse button on the File Needed window Choose A D Driver then click the Open button and then click OK button How to install 10 Click Start Setting Control Panel Double click the Display icon Select the Settings tab and click Advanced Properties button Choose Monitor Casel Ifthe Properties button is inactive it means your monitor is properly configured Please stop installation Case2 If the Properties button i
28. ention is to set your PC or System to operate a Screen Saver program when you are not using it Image retention may not occur when a LCD panel is operated under normal conditions Normal conditions are defined as continuously changing video patterns When the LCD panel is operated for a long time with a fixed pattern over 12 hours there may be slight difference in voltage between electrodes that work the liquid crystal LC in a pixel The voltage difference between electrodes increases with time forcing the liquid crystal to lean When this occurs the previous image may be seen when the pattern is changed To prevent this the accumulated voltage difference must be decreased 58 Information Common Electrode ITO Black Matrix Color F ilter Data Gate TFT Pixel Electrode Storage Capacitor Bus Line fee me 3 Our LCD Monitor satisfies ISO13406 2 Pixel fault Class II 59 Appendix Terms Dot Pitch Vertical Frequency Horizontal Frequency Interlace and Non Interlace Methods Plug amp Play Resolution Appendix The image on a monitor is composed of red green and blue dots The closer the dots the higher the resolution The distance be tween two dots of the same color is called the Dot Pitch Unit mm The screen must be redrawn several times per second in order to create and display an image for the user The frequency of this repetition per second 1s called the Vertical Frequency or Refresh Rate
29. essional e Windows Vista It is recommended using MagicTune in Windows 2000 or later Hardware e 32 MB Memory above e 60 MB Hard disk space above For more information visit the MagicTune website 22 Uninstall Using the Software The MagicTune program can be removed only by using the Add or Remove Programs option of the Windows Control Panel Perform the following steps remove MagicTune l gt 6 Go to Task Tray Start Settings and select Control Panel in the menu If the program runs on Windows XP go to Control Panel in the Start menu Click the Add or Remove Programs icon in Control Panel In the Add or Remove Programs screen scroll down to find MagicTune Click on it to highlight it Click the Change Remove button to remove the program Click Yes to begin the uninstall process Wait until the Uninstall Complete dialog box appears Note Visit the MagicTune website for technical support for MagicTune FAQs questions and answers and software upgrades The Magictune program is an additional program for monitor products Some computing systems that install either an older ar the latest video driver are not compatible with Magicline Please visit the Magicline Website for technical support for Magicline Specifications subject to change without notice Magictune is a trademark of SAMSUNG ELECTRONICS CO Inc Windows
30. he above settings to set the resolution Language Select the language using the up or down key The displayed content will disappear after 40 seconds Turn the Power button off and on It will be displayed again It can be displayed up to three 3 times Make sure to adjust the resolution of your PC before reaching the maximum count Note The resolution displayed on the screen is the optimal resolution for this product Adjust your PC resolution so that it is the same as the optimal resolution for this product C MENU button MENUAID Opens the on screen menu and exits from the menu Also use to exitthe OSD menu or return to the previous menu e Customized Keyj Lt You can customize key assignment for the Custom button according to your pref erences Introduction Note You can configure the customized key for a required function via Setup gt Cus tomized Key Brightness button M When OSD is not on the screen push the button to adjust brightness gt gt Click here to see an animation clip eO Adjust buttons F k These buttons allow you to adjust items in the menu Enter button SOURCE button Activates a highlighted menu item Push the 2J SOURCE then selects the video signal while the OSD is off When the SOURCE button is pressed to change the input mode a message appears in the upper left of the screen displaying the current mode analog or digital input signal No
31. hei niue Corps amen Coige 5 Click Properties in the Monitor tab If the Properties button is deactivated it means the configuration for your monitor is completed The monitor can be used as is If the message Windows needs is displayed as shown in the figure below click Continue 15 Using the Software Sorter refresh rate a eim d ie reddes that Pri monster cannot depu Ciearrg Ew chick bec dioei vina ic rie dispury exes foa ha m reter cannot dagli comert y This ing lei 5o ani uel Sinplag and or dampyak haar cheap Continue Cancel User Account Control helps stop unauthorized changes to your samplar Note This monitor driver is under certifying MS logo and this installation doesn t damage your system The certified driver will be posted on Samsung Monitor homepage Click Update Driver in the Driver tab Dena tin e RAGS Honor preety i Ta vers cat nin cui Sa ceiver ia To ups Ea Greer pote Hor Pear cansa fa drvca Indy afe opdate Eu ror rod dal Sah ied raae deeem hasina fas minini dica Te uriruial Fa dia Ademe Check the Browse my computer for driver software checkbox and click Let me pick from a list of device drivers on my computer i je Hoey Oo you ward qo sedrch lor dereer pofbeneT Eria For dreorr pean Dn rea COIT dart Vus deere uaan su Fax ums arcam panh gutomatcally es iopdabed dover potters Kirakan
32. hen change the frequency of the video card Refer to the Preset Timing Modes If the initial screen the login screen does not appear contact the Service Center or your deal er Q Canyousee Not Optimum Mode Recommended Mode 1440 x 900 60 HZ on the screen You can see this message when the signal from the video card exceeds the maximum resolution and frequency that the monitor can handle properly A Adjust the maximum resolution and frequency that the monitor can handle properly A Ifthe display exceeds SXGA or 75 Hz a Not Optimum Mode Recommended Mode 1440 x 900 60 Hz message is displayed If the display exceeds 85 Hz the display will work properly 48 Troubleshooting but the Not Optimum Mode Recommended Mode 1440 x 900 60 Hz message appears for one minute and then disappears Please change to the recommended mode during this one minute period The message is displayed again if the system is rebooted There is no image on the screen Is the power indicator on the monitor blinking at 1 second intervals The monitor is in PowerSaver mode Press a key on the keyboard to activate the monitor and restore the image on the screen If there is still no image press the 21 SOURCE button Then press any key on the keyboard again to activate the monitor and restore the image on the screen Connected using the DVI cable You may get a blank screen if you boot the system before you connect the DVI cable or
33. llows Display Mode Horizontal Vertical Fre Pixel Clock Sync Polarity Frequency quency Hz MHz H V kHz IBM 640 x 350 31 469 70 086 25 175 IBM 640 x 480 31 469 59 940 Zo 9 IBM 720 x 400 31 469 70 087 28 322 MAC 640 x 480 35 000 66 667 30 240 MAC 832 x 624 49 726 74 551 57 284 MAC 1152 x 870 68 681 75 062 100 000 VESA 640 x 480 37 861 72 809 31 500 VESA 640 x 480 37 500 75 000 31 500 VESA 800 x 600 35 156 56 250 36 000 SE VESA 800 x 600 37 879 60 317 40 000 VESA 800 x 600 48 077 72 188 50 000 T VESA 800 x 600 46 875 75 000 49 500 dE VESA 1024 x 768 48 363 60 004 65 000 VESA 1024 x 768 56 476 70 069 75 000 VESA 1024 x 768 60 023 75 029 78 750 VESA 1152 x 864 67 500 75 000 108 000 Tr VESA 1280 X 960 60 000 60 000 108 000 TE VESA 1280 X 1024 63 981 60 020 108 000 VESA 1280 X 1024 79 976 75 025 135 000 T VESA 1440 x 900 55 935 59 887 106 500 VESA 1440 x 900 70 635 74 984 136 750 Horizontal Frequency The time to scan one line connecting the right edge to the left edge of the screen horizontally is called the Horizontal Cycle and the inverse number of the Horizontal Cycle is called the Horizontal Frequency Unit kHz 1 d j Tp 2M m js p 7 Vertical Frequency Like a fluorescent lamp the screen has to repeat the same image many times per second to display an image to the user The frequency of this repetition is called the Vertical Frequency or
34. mmended Mode 1440 x 900 60 Hz message comes up disconnect the cable from the computer while the monitor is still powered on If there is a message coming up on the screen or if the screen goes white this means the monitor is in working condition In this case check the computer for trouble Check List A note Before calling for assistance check the information in this section to see if you can remedy any prob lems yourself If you do need assistance please call the phone number on the Information section or contact your dealer No images on the screen cannot turn on the monitor Is the power cord connected properly A Check the power cord connection and supply Q Can you see Check Signal Cable on the screen A Connected using the D sub cable Check the signal cable connection Connected using the DVI cable If you still see an error message on the screen when the monitor is connected properly check to see if the monitor status is set to analog If you still see an error message on the screen when the monitor is connected properly check to see if the monitor status is set to analog Press I SOURCE button to have the monitor double check the input signal source Q Ifthe power is on reboot the computer to see the initial screen the login screen which can be seen A Ifthe initial screen the login screen appears boot the computer in the applicable mode the safe mode for Windows ME XP 2000 and t
35. n click OK button Microsoft Windows XP 2000 Operating System Hardware Installation The software you ane installing for this hardware Samsung has not passed Windows Logo besting bo venfy ifs compabbdity with Windows XP Ted me why thes testing is important Continuing your installation of thie software may impair or destabilize the comect operation of your system either immediately or in the future Microsoll strongly recommends that pou stop this installation now and contact the hardware vendor for software that has passed Windows Logo testing Conlinue Argway 14 Using the Software Note This monitor driver is under certifying MS logo and this installation doesn t damage your system The certified driver will be posted on Samsung Monitor homepage http www samsung com Installing the Monitor Driver Manual Microsoft Windows Vista Operating System 1 Insert your Manual CD into your CD ROM drive 2 Click C start and Control Panel Then double click on Appearance and Personalization 3 ege cem mmm mes ee c uma pie bom cmp gen cm cms ee Bl cec eis omm P E UMS ram eum oe cg p ion qp e pei e rm Sage Fun LION Eu ee es QS E OLEO BENGAL DL o Ba r Pirri mum mmn mnoggm gum Sewer enm om Oum mem remm y ure p oo a m Mm remus eee hy nur reium crum 4 More Deeg or ord bes rule pyi eer 1 Beluitipie Meniers in MICA eher DOUG LE
36. nected or damaged 4 Turn off your monitor and reconnect the video cable then turn on both your computer and the monitor If your monitor screen remains blank after using the previous procedure check your video controller and computer system your monitor is functioning properly Warning Messages If there is something wrong with the input signal a message appears on the screen or the screen goes blank although the power indicator LED is still on The message may indicate that the monitor is out of scan range or that you need to check the signal cable Not Optimum Mode Recommended Mode 1440 x 900 60 Hz Environment The location and the position ofthe monitor may influence the quality and other features ofthe monitor If there are any sub woofer speakers near the monitor unplug and relocate the woofer to another room Remove all electronic devices such as radios fans clocks and telephones that are within 3 feet one meter of the monitor Useful Tips A monitor recreates visual signals received from the computer Therefore if there is a problem with the computer or the video card this can cause the monitor to become blank have poor coloring become 47 Troubleshooting noisy and video mode not supported etc In this case first check the source of the problem and then contact the Service Center or your dealer Judging the monitor s working condition If there is no image on the screen or a Not Optimum Mode Reco
37. o damage to the cable L3 Do not lift or move the product back and forwards or right and left while only holding the power cord or signal cables e Otherwise it may fall and result in electric shock damage to the product or fire due to damage to the cable L3 Make sure that the ventilating opening is not blocked by a table or curtain e Otherwise it may result in fire due to an increase in the internal tem perature L Do not place any containers containing water vases flowerpots med icines as well as any metal on the product e fwateroraforeign material enters the product disconnect the power cord and contact a Service Center e This may result in a product malfunction electric shock or fire L3 Do not use or keep combustible spray or flammable material near the product e Otherwise this may result in an explosion or fire L3 Do not insert any metal such as chopsticks coins pins and steels or inflammable objects such as matches or paper inside the product through the ventilating openings input and output terminals etc e J fwater or foreign material enters the product disconnect the power cord and contact a Service Center e Otherwise this may result in electric shock or fire L3 When using a fixed screen for a long time an afterimage or stain may occur e Ifyou are not using your product for a long period of time put it into sleep mode or use a moving screen saver J Set a resolution and freq
38. olor or a moving image is recommended e Set the Monitor to power off with the PC Display Properties Power Scheme B Suggestions for specific applications Ex Airports Transit Stations Stock Markets Banks and Controlling Systems We recom mend that you follow set up of your display system program as below D Display Information together with Logo or Moving image cycle Ex Cycle Display Information for 1 hour followed by a Display Logo or moving image for 1 minute 8B Change the Color Information periodically Use 2 different colors Ex Rotate the Color Information with 2 colors every 30 minutes Type 1 Type 1 FLGHT TIME FLGHT TIME OZ348 20 30 lt gt EYEL 20 30 UA102 21 10 UA102 21 10 Avoid using a combination of characters and background color with large difference in luminance Avoid using Grey colors which can cause Image retention easily Avoid Colors with big difference in luminance Black amp White Grey Ex SYSTEM 245 Recommended settings Bright colors with little difference in luminance Change the characters color and background color every 30 minutes 57 Information Ex SYSTEM 245 STATUS OK e Every 30 minutes change the characters with movement SYSTEM 245 STATUS OK Ex AA i a E oP UU KA1710 12 00 KA1710 12 00 L PASS S NN LN ES UA0110 13 30 WF TIE T e Dei AA0002 14 00 FA7777 14 15 The best way to protect your monitor from Image ret
39. onia it impor ant Click the Browse button then choose A D Driver and choose your monitor model in the model list and click the Next button Install From Disk lisent Ihe manu chus metallahon dk and then make sure that the conect drive t selected below Copy marvulacturer s fles brome Hardware Update Wizard Selec the device divei you want b malall For thia herder 8 5 elect the rra acturer anl model of vor handen device are fen check Fest HP gea hase dk that entra the deve you wars bo thal chek Hasse Desk Madel Samsung ees a a This dower s peol cdegstalls signed Lael me whe creer marine ii pacrtant Cae Cie Coe If you can see following message window then click the Continue Anyway button Then click OK button Hardware Installation The software pou are installing ca Biz hencevare Samsung een hat not passed windows Loge besing lo warily itt compatibili writ inhoaa SAP Ted rum veg th belir ig importan Continuing your installation of this software mag impr or destabilize the comect operation of your system eather immediately or m the future Microzolft strongly recommends thal sou stop Uis inttallalion row and intact the handersare vendor for software that has passed Windows Logo testing Continue Argway STOP Installstion Note This monitor driver is under certifying MS logo and this installation doesn t damage your system The certified driver will be post
40. ot put any heavy objects on the product e This may result in personal injury and or damage to the product When using the product use it in the correct position e Keep your back straight while looking at the product e The distance between your eyes and the screen should be between 45 to 50 cm Look at the screen from a slightly higher location than the height of the screen When using the product use it in the correct position e Adjust the angle so that light is not reflected on the screen e Place your arms perpendicular to your sides and allow your arms to be level with the back of the hand e Keep your elbow at 90 degrees Safety Instructions Keep your knees at greater than 90 degrees and keep your heels firmly on the floor Keep your arms lower than your heart Introduction Package Contents Note Please make sure the following items are included with your monitor If any items are missing contact your dealer Contact a local dealer to buy optional items Unpacking Monitor Manuals Quick Setup Guide Warranty Card User s Guide Not available in all loca tions Cables a CN Ur VO D Sub Cable Power Cord DVI Cable option Others Cleaning Cloth Note This is only provided for highly polished black products as a product feature Introduction Your Monitor Initial Settings Front The optimal resolution for this monitor is as follows 1440 x 900 60Hz Follow t
41. pa ol Francais Italiano Svenska PyccKHH Portugu s T rk e Note The language chosen affects only the language of the OSD It has no effect on any software running on the computer MENU A gt gt A MENU 39 Adjusting the Monitor H Position SAMSUNG MENU LIT Ee1 W A GAs AUTO You can change the horizontal position where the OSD menu appears on your monitor MENU gt gt H amp H amp Y MENU V Position SAMSUNG menu O e 1 W A GX3 soURE AUTO b You can change the vertical position where the OSD menu appears on your monitor MENU 7 gt a 5i Y MENU 40 Adjusting the Monitor Transparency bots D La E i j Leg rs h 1 a mac SET s B do ud f T t E Sm r1 T or 3 ee ah M JB e ec i sa SAMSUNG menu Ee1 W ACE 3 soURcE AUTO Change the transparency of the background of the OSD e Off On MENU 4 gt A T H 4 MENU Display Time SAMSUNG MENU CI GF An G souRE AUTO 5 The menu will be automatically turned off if no adjustments are made for a certain time period You can set the amount of time the menu will wait before it is turned off 4 Adjusting the Monitor e sec e 10sec e 20sec e 200 sec MENU gt a gt a H gt MENU EH Setup Reset aD mn
42. ront end of the bottom of the product does not project out e Otherwise it may fall or cause personal injury e Use a cabinet or rack of a size appropriate to the product Safety Instructions L3 DO NOT PLACE CANDLES MOSQUITO REPELLANT CIGA RETTES AND ANY HEATING APPLIANCES NEAR THE PROD UCT e Otherwise this may result in fire L3 Keep heating appliances as far away from the power cord or the prod uct as possible e Otherwise this may result in electric shock or fire L3 Do not install it in a badly ventilated location such as a bookcase or closet e Otherwise this may result in fire due to an increase in the internal temperature L3 Put down the monitor carefully e Failing to do so may damage the monitor L Do not place the front of the product on the floor e Otherwise this may result in damage to the screen display J Ensure that an authorized installation company installs the wall mount e Otherwise it may fall and cause personal injury Make sure to install the specified wall mount L3 Install your product in a well ventilated location Ensure that there is a clearance of more than 10 cm from the wall e Otherwise it may result in fire due to an increase in the internal tem perature L3 Ensure that the packaging vinyl is kept away from children e Otherwise it may result in serious harm suffocation if children play with it L3 If the height of your monitor is adjustable do not place an
43. s active click the Properties button then follow next steps continually Click Driver and then click on Update Driver then click on the Next button Choose Display a list of the known drivers for this device so that I can choose a specific driver then click Next and then click Have disk Click the Browse button then choose A D Driver Click the Open button then click OK button Choose your monitor model and click the Next button then click Next button Click the Finish button then the Close button If you can see the Digital Signature Not Found window then click the Yes button And click the Finish button then the Close button Microsoft Windows Millennium Operating System l 2i 3 Click Start Setting Control Panel Double click the Display icon Select the Settings tab and click Advanced Properties button 20 10 11 Using the Software Select the Monitor tab Click the Change button in the Monitor Type area Choose Specify the location of the driver Choose Display a list of all the driver in a specific location then click Next button Click the Have Disk button Specify A D driver then click OK button Select Show all devices and choose the monitor that corresponds to the one you connected to your computer and click OK Continue choosing Close button and OK button until you close the Display Properties dia logue
44. t the image according to your preferences Not available in MagicColor mode of Full and Intelligent MENU A gt a 5i A Y MENU 33 Adjusting the Monitor Color Control SAMSUNG MENU TT GF A X3 soURE AUTO 6 Adjusts individual Red Green Blue color balance Not available in MagicColor mode of Full and Intelligent MENU gt H gt a T H a T H A MENU Color Effect SAMSUNG MENU H F ARY xX soURcE AUTO You can change the overall mood by changing the screen colors Not available in MagicColor mode of Full and Intelligent 34 Adjusting the Monitor e Off e Grayscale Green e Aqua e Sepia e Off This applies an achromatic color to the screen to adjust the screen effects e Grayscale The default colors of black and white are displayed Green This applies the green color effect to a black and white screen Aqua This applies the aqua color effect to a black and white screen e Sepia This applies the Sepia color effect to a black and white screen MENU gt H a T gt 4 F MENU Gamma SAMSUNG MENU LIT GJ Ai GX soURE AUTO ES i Gamma correction changes the luminance of the colors with intermediate luminance e Model e Mode 2 e Mode3 MENU gt 4 a T H F MENU 35 Adjusting the Monitor c Image Coarse SAMSUNG M
45. te If you select the digital mode you must connect your monitor to the graphic card s DVI port using the DVI cable gt gt Click here to see an animation clip o AUTO button Use this button for auto adjustment gt gt Click here to see an animation clip O Power button J Use this button for turning the monitor on and off Rear Note The configuration at the back of the monitor may vary from product to product oO POWER port 10 Introduction Connect the power cord for your monitor to the POWER port on the back of the monitor e DVI IN port Connect the DVI Cable to the DVI IN port on the back of your monitor amp y RGB IN port Connect the D sub cable to the 15 pin RGB IN port on the back of your monitor Kensington Lock The Kensington lock is a device used to physically fix the system when using it in a public place The locking device has to be purchased separately For using a locking device contact where you purchase it Note See Connecting Cables for further information regarding cable connections 11 Connections Connecting Cables ip Rear of Monitor Rear of Computer i Macintosh c n a Tiassa Q Connect the power cord for your monitor to the power port on the back of the monitor Plug the power cord for the monitor into a nearby outlet O Use a connection appropriate for your computer Using the D sub Analog connector on the video card e Conne
46. tor Execute X Window after setting other requested hardware 21 Using the Software Natural Color Natural Color Software Program Natural Color Pro color management system Monitor Color Cal amp Profiling Preference Copyrightg 2003 Samsung Electrenics Ca Ltd One of the recent problems in using a computer 1s that the color of the images printed out by a printer or other images scanned by a scanner or a digital camera are not the same as those shown on the monitor The Natural Color S W is the very solution for this problem It is a color administration system de veloped by Samsung Electronics in association with Korea Electronics amp Telecommunications Research Institute ETRI This system is available only for Samsung monitors and makes the color of the images on the monitor the same as the printed or scanned images For more information refer to Help F1 in the software program How to install the Natural Color software Insert the CD included with the Samsung monitor into the CD ROM Drive Then the initial screen of the program Natural Color will be executed Click Natural Color on the initial screen to install the Natural Color software To install the program manually insert the CD included with the Samsung monitor into the CD ROM Drive click the Start button of Windows and then select Run Enter D color NCProSetup exe and then press the Enter key If the drive where the CD is inserted is not D
47. uency appropriate to the product e Otherwise your eyesight may be damaged NCS Q es Safety Instructions L3 If you continually move closer to the product screen your eyesight may be failing J To ease eye strain take at least a five minute break after every hour of using the monitor L3 Do not install it in an unstable location such as an unstable rack or uneven surface or a location exposed to vibrations e Otherwise it may fall and cause personal injury and or damage the product If you use the product in a location exposed to vibrations it may damage the product and result in fire L3 When moving the product turn the power off and disconnect the power plug antenna cable and all the cables connected to the product e Otherwise it may result in electric shock or fire L3 Ensure that children do not hang onto the product or climb up onto the product e The product may fall and cause personal injury or death L3 If you do not use the product for a long period of time disconnect the power cord from the power outlet e Otherwise this may result in overheating or fire due to dust and may result in fire due to electric shock or leakage L3 Do not place any heavy items or toys or confectionery such as cookies etc that may attract the attentions of children onto the product e Your children may hang onto the product causing it to fall and this may result in personal injury or death L3 Do not t
48. urn the product upside down or move it while holding only the stand e Otherwise it may fall and result in personal injury and or damage to the product L3 Do not place the product in a location exposed to direct sunlight or near any heat such as a fire or heater This may reduce the lifetime of the product and may result in fire L Do not drop any objects onto the product or cause any impact to the product e Otherwise this may result in electric shock or fire Safety Instructions L3 Do not use a humidifier or kitchen table near the product e Otherwise this may result in electric shock or fire L3 When there is a gas leak do not touch the product or the power plug but ventilate immediately e Ifa spark occurs it may cause an explosion or fire L3 If the product has been turned on for a long time the display panel becomes hot Do not touch it e Keep the small accessories in a location out of the reach of children L3 Be careful when adjusting the angle of the product or the height of the stand e This may result in personal injury as your hand or fingers may be come caught e Also if you tilt the product too far it may fall and cause personal injury L3 Do not install the product in a location low enough for children to reach e Otherwise it may fall and result in personal injury e Since the front part of the product is heavy install the product on a level and stable surface L3 Do n
49. ust Customized Key t using the Direct button Customized key SAMSUNG MENU LID GY AR Go SOURCE AUTO b You can customize key assignment for the Custom button according to your preferences To view the operating screen displayed when pressing the button after configuring the cus tomized key for a function click the name of each function MagicBright MagicColor Color Effect Image Size Note You can configure the customized key for a required function via Setup gt Customized Key 21 Adjusting the Monitor Brightness SAMSUNG MENU LID Ee W AC GoSOURCE AUTO b When OSD is not on the screen push the Brightness E 3 button to adjust brightness SOURCE pl A s PT g ais SAMSUNG MENU LITI H F Aj Tt CX3 souRcE AUTO o EU U P EE Selects the video signal while the OSD 1s off 28 Adjusting the Monitor OSD Function Erl Picture Brightness Contrast Magic Bright Color MagicCol Color Tone Color Con Color Effect Gamma or trol RC 3 Image Coarse Fine Sharpness H Position V Posi tion t OSD Language H Position V Position Transparen Display cy Time dan Setup Reset Customized Off Timer Auto Source Image Key Size RTA Informa tion E Picture Brightness Not available in MagicBright mode of Dynamic Contrast E es SAMSUNG MENU LID GY AR G SOURCE AUTO b ah vg You c
50. w video card or if you assembled the PC check if the installed the adapter video driver and the monitor driver Check if the scanning ratio of the video screen is set to between 56 Hz 75 Hz Do not exceed 75 Hz when using the maximum resolution If you have problems in installing the adapter video driver boot the computer in Safe Mode remove the Display Adapter in the Control Panel System Device Administrator and then reboot the computer to reinstall the adapter video driver Note If problems repeatedly occur contact an authorized service center How can I change the frequency A The frequency can be changed by reconfiguring the video card A Note that video card support can vary depending on the version of the driver used Refer to the computer or the video card manual for details How can I adjusts the resolution Windows XP Set the resolution in the Control Panel Appearance and Themes Display Settings A Windows ME 2000 Set the resolution in the Control Panel Display Settings Contact the video card manufacturer for details 5 Troubleshooting Q How can I set the Power Saving function Windows XP Set the resolution in the Control Panel Appearance and Themes Display Screen Saver Set the function in the BIOS SETUP of the computer Refer to the Windows Computer Man ual A Windows ME 2000 Set the resolution at the Control Panel Display
51. ws NT are registered trademarks of Microsoft Corporation VESA DPM and DDC are registered trademarks of Video Electronics Standard Association the ENERGY STAR name and logo are reg istered trademarks of the U S Environmental Protection Agency EPA As an ENERGY STAR Partner Samsung Electronics Co Ltd has determined that this product meets the ENERGY STAR guidelines for energy efficiency All other product names mentioned herein may be the trade marks or registered trademarks of their respective owners 63
52. y object or part of your body on the stand when lowering it qb e This may cause damage to the product or the person carrying it Clean When cleaning the monitor case or the surface of the TFT LCD screen wipe N with a slightly moistened and soft fabric L Do not spray cleaner directly onto the surface of the product Otherwise this may result in the discoloration and distortion of the structure and the screen surface may peel off Others Safety Instructions L3 Clean the product using a soft cloth with a monitor cleaner only If you must use a cleaner other than the monitor cleaner dilute it with water at a ratio of 1 10 L3 When cleaning the power plug pins or dusting the power outlet clean it with a dry cloth e Otherwise it may result in fire L3 When cleaning the product make sure to disconnect the power cord e Otherwise it may result in electric shock or fire L3 When cleaning the product disconnect the power cord and clean it softly with a dry cloth e Do not use chemicals such as wax benzene alcohol thinner mos quito repellant lubricant or cleaner These may change the appear ance of the product surface and peel off the indication labels on the product L3 Since the product housing is easily scratched make sure to use the specified cloth only e Use the specified cloth adding only a little water As the product may be scratched if there is any foreign material on the cloth m

Samsung BW1953 راهنمای محصول

Contents

Download Pdf Manuals

Related Search

Related Contents