Home

Samsung NP-P460-AA01ES Manual de Usuario VISTA

Contents

1. The system was dropped or the casing is damaged The system performance changes 22 The Instruction On Safety Operation of NotePC When installing and operating devices please refer to safety requirements in the user guide 2 Devices can be used only with the equipment specified in the technical specifications of the devices If any smell of burning or smoke from the computer 3 the unit should be switched off and battery removed The unit should be checked by a qualified technician before reuse 4 Service and repair of devices should be carried out by authorized service centers Do not allow your portable computer to operate 5 with the base resting directly on exposed skin for extended periods of time The surface temperature of the base will rise during normal operation particularly when AC Power is present Allowing sustained contact with exposed skin can cause discomfort or eventually a burn Replacement Parts and Accessories Use only replacement parts and accessories recommended by manufacturer Ra To reduce the risk of fire use only No 26 AWG or larger telecommunications line cord Caution Do not use this product in areas classified as hazardous Such areas include patient care areas of medical and dental facilities oxygen rich environments or industrial areas Note Battery Disposal Laser Safety Pona MIS TEETAR E PANE ATPa y the appropriate safety standards including IEC 60825 1
2. 1 Take hold of the end of the card and remove the Caution card To format a memory card You have to format a card first to use it Formatting a card deletes all data saved on the card If the card includes data backup the data Caution before formatting it 1 Click Start gt Computer 2 Right click over a card drive with the touchpad and select Format 3 Click Start to the formatting To use a card to exchange data with a digital device such as a digital camera formatting the data using the digital device is recommended When you try to use a card which is formatted in the computer in another digital device you may have to format the card again in the device You cannot format write or delete data from a SD or SDHC card with a write protection tab when it is in the Lock position Inserting and removing a memory card repeatedly may damage the memory card i PC Card Slot Before You Start Remove the dummy card installed to protect the PC card slot first Lightly push the Eject button of the PC card slot The Eject button pops up Press the Eject button fully to eject the dummy card You can insert and use various PC cards using the PC card slot This computer provides one PC card slot supporting the 16 32 bit type The PC card slot does not support the ZV and PC card Ill types To insert a PC card 1 2 Insert a PC card into the PC card slot on the side of the computer
3. Boe If you did not select the feature in the registration step Foaki oiii Ww click Start gt All Programs or Program gt Infineon File Edit view Favorites Tools Help Other Places ae O O B sewer Grocers Security Platform Solution gt Security Platform O Shared Documents Address C Documents and Settings sedonaiMy Documents t if EJ a Management click Settings in the User Settings 3 My Computer E My Network Places File and Folder Ta 00 tab Select File and folder encryption with Personal I Make a new folder H Details yl 2 a this Folder to the sate oat Sec u re D ri ve P S D 7 fea Share this folder Other Places G My Documents Shared Documents My Computer E My Network Places To use the PSD you have to first load PSD If you have selected the Load my Personal Secure Drive at logon option in Step 10 Registering Security Platform User PSD is automatically loaded If you did not select the option you can load PSD as follows To cancel encryption LY You can also decrypt an encrypted folder or file according to the procedures above 2G B 3 2 3 Res SP SPP wedi Initializing and Reconfiguring the TPM Chip 1 Right click the Security Platform Pal icon inthe If you have to re register as a user due to a hard disk Taskbar and select Personal Secure Drive gt Load drive fault you can initialize the authentication information
4. French Ce produit est conforme aux exigences de la Directive Europ enne 1999 5 EC German Dieses Produkt entspricht den Bestimmungen der Eu rop ischen Richtlinie 1999 5 EC Greek To TIPOIOV AUTO T Npo TIG TIPOBAEWEIC TAG Eupwraik s Odnyias 1999 5 EC Icelandic essi vara stenst regluger Evr pska Efnahags Ban dalagsins n mer 1999 5 EC Italian Questo prodotto conforme alla Direttiva Europea 1999 5 EC Norwegian Dette produktet er i henhold til bestemmelsene i det euro peiske direktivet 1999 5 EC Portuguese Este produto cumpre com as normas da Diretiva Europ ia 1999 5 EC 33 Spanish Este producto cumple con las normas del Directivo Eu ropeo 1999 5 EC Swedish Denna produkt har tillverkats i enlighet med EG direktiv 1999 5 EC European Economic Area Restrictions Local Restriction of 802 11b 802 11g Radio Usage Note to integrator The following statements on local restrictions must be published in all end user documentation provided with the system or product incorporating the Intel PRO Wireless 2200BG Network Connection product Due to the fact that the frequencies used by 802 11b 802 11g wireless LAN devices may not yet be harmonized in all countries 802 11b 802 11g products are designed for use only in specific countries or regions and are not allowed to be operated in countries or regions other than those of designated use Caution As a user of these products
5. Perchlorate Material special handling may apply See www dtsc ca gov hazardouswaste perchlorate LAMP S INSIDE THIS PRODUCT CONTAIN MERCURY AND MUST BE RECYCLED OR DISPOSED OF ACCORDING TO LOCAL STATE OR FEDERAL LAWS For details see lamprecycle org eise org or call 1 800 Samsung vo I Overview Before You Start Optional items may be changed or may not be provided depending on the computer model The actual color and appearance of the computer may differ from the pictures used in this guide 2 LCD The screen images are displayed here 3 Speaker A device used to generate sound 4 Microphone You can use the built in microphone for sound input 5 Multi Card Slot A card slot that supports SD Card SDHC MMC 6 Status Indicators Shows the operating status of the computer The corresponding operating LED is lit when the corresponding function operates E p 37 Camera Lens Optional Using this lens you can take still pictures and record video T Touchpad Touchpad Buttons The touchpad and touchpad buttons provide functions similar to the mouse ball and buttons E p 47 A 36 11 Power Button Turns the computer on and off E p 42 10 Ambient Light Sensor A light sensitive electronic component used to adjust the brightness of a LCD display s backlight E p 149 3 Speaker A device used to generate sound 9 Keyboard A device to enter data by pressing the keys EJ p 44 8
6. Volume Battery Status External Display Sync Center GP Not presenting Display Connection setings Presentation Settings aP Customized by SAMSUNG Auto Dimming G on GD oian GZ ats ison Battery Only i j Easy ALS Manager House Window Easy Battery Manager Easy Network Manager Easy ALS Manager Easy Network Manager Window 2 Configure the volume the battery status the external display the Sync center etc according to your requirements a Configurable items may differ depending on the installed Windows Vista version or programs f Easy Network Manager program is installed you can see Easy Network Manager window Note f Easy ALS Manager program is installed you can see Easy ALS Manager window If you turn the wireless LAN off in the Mobile Center this is not reflected by the wireless LAN LED Chapter 4 Using the Network Wired Network Wireless Network Connecting to a Wireless LAN Using the Easy Network Manager Optional Network Settings Using in Another Location Diagnosing the Network Status Connecting with a Modem Optional Bluetooth Optional Bluetooth Function Using Bluetooth 96 99 100 101 101 103 104 105 106 106 107 Wired Network A wired network is a network environment used for a company network or broadband internet connection at home Before You Start You can also configure the network settings using the Easy Network Manager E p 101 1 Conn
7. POPP OPEC SELECT E OLEH ESOL EE EEEEEHETEEEEE EE SOEEEH EEE E EEE HOE EEE EHO EE EEEEEETEEEEEHOEEE HOLE OE EOEHESEOEE EE EEEE EE EEHEE HOLE HS EOEE OTHE OEEETETEEEEEE TOTES ESSE OTEEEEE EEE OEEEEEE RETESET ELOEEEEEEEEEEEEEEHELELEELELELELELE EEE EE LELELELEEEEEELEEEEEEEEEELEELELELELEEe Using this function you can remove a program or Windows function and download a new program from the internet POPC OOOOH OLE OE EEE EOETEESOEEETE SHOE OEE HT SOEEOHEETOOEH HOE TEE E OEE OE TEETH OEEESOTEETE SOOO E SOOTHE OEEETETOOEOE SESE EH TOTO ETOOEEEETOEH ETO OEEE SHOE TH TOTO TES OOE TE ELEEHETEOEEETOTEHTHTOHOTE SOLE EE EEEEEHESOOHETOEEEET EOE ETOOETE TOOTH EEOEEETOOEHE HS EEOETEDELEEEEEEEEHELEEEEDOOEEOEOD Mobile PC You can set up the mobility power option and personal settings for your mobile PC You can also synchronize your mobile PC with another portable device or network folder OO e Control Panel Home Classic View CA gt Control Panel gt 5 System and Maintenance Get started with Windows Back up your computer Security Check for updates Check this computer s security status Allow a program through Windows Firewall Network and Internet Connect to the Internet View network status and tasks User Accounts and Family Safety Set up parental controls for any user Add or remove user accounts Appearance and Personalization Change desktop background Customize colors Adjust screen resolution Clock L
8. Read the agreement and click Agree to continue 3 If the initial menu screen appears click Restore If you click Select by Symptom the Select by Symptom menu appears If you select a symptom a recommended restoration option will blink Click the restoration option to continue Select either Basic Restore or Complete Restore from the Restore menu A Basic Restore restores the major Windows files only while maintaining the user configuration and data on the C drive in a short time A Complete Restore deletes the entire C drive and then restores the contents of the C drive Run Complete Restore if the computer does not work even after Basic Restore has been completed 4 1 If you have selected Basic Restore In the Basic Restore screen click the Next button The system will be restarted 4 2 If you have selected Complete Restore In the restoration point selection screen select the restoration point described as Computer Initial Status and click the Next button The system will be restarted as additionally installed programs please backup your important data first using the Data Backup function before running Complete Restore tv Since a Complete Restore deletes all user data as well 5 The computer boots up into restoration mode and the restoration progress message appears If you click OK the restoration begins The restoration may take some time please wait for a moment 6 When the Rest
9. gt Windows Media Player parE View headlines r Sidebar fa Windows Photo Gallery 3 Start Search Windows Live Messenger Download Men u 22 Recent Items Windows DVD Maker Computer Windows Calendar Network Connect To Control Panel Default Programs S A Help and Support a EE FEN F E l 4 Start ie ats Oe Wir SOS AN 6 System Button Tray with 5 Taskbar Clock 1 Recycle Bin You can drop useless files and folders here ai ah cen oti Beem ae e EPS AAE IPEE EN EOE EAS A lt a aauaasdenmtananmnenen PE IE ET RE E EE N A eee aoe a REEE E a seinen EEEE NEEESE AAE ENET EEA T T E EE E ES cman ammnmons AEE N PRETA oneal e eaceescceseesteqoaceeenses cee tnaae poses ese 6 System Tray with Shows some running program icons Icons not being used are hidden If you click the arrow mark on Clock the left you can view hidden icons This is a mini information program that appears on the Sidebar Sidebar This is a vertical bar that appears at the side of the Desktop 8 Gadget This is a mini information program that appears on the Sidebar Some items may not be provided depending on the Windows Vista version Note Start Menu The menu from which you can launch programs Click Start Ey The Start menu appears Alternatively press the Windows key on the keyboard Internet i Internet Explor Fixed Programs mona SAMSUNG Username Windows Mail Documents Pictures Music Games The program or
10. m EEN T AE iar Te ovocsto aava the changes and ext Seton OE PA ETIE PENE E E I dco tiene eee ees The keyboard image may differ from the actual keyboard Note Setting a Boot Password When setting a password you have to enter a password to use the computer or enter the BIOS Setup By configuring a password you can restrict system access to authorized users only and protect data and files saved on the computer Before You Start Do not lose or forget your password If you have forgotten your password contact a Samsung service center In this case a service fee will be charged Setting a Supervisor Password 3 Enter a password press lt Enter gt re enter the oe password for confirmation and press lt Enter gt again A Supervisor Password is required to turn the computer The password can be up to 8 alphanumeric on or to start the System Setup characters Special characters are not allowed When setting a Supervisor Password users other than a supervisor cannot use the computer Set Supervisor Password Enter New Password I 1 Select the Security menu in the BIOS Setup Confirm New Password I 2 In the Set Supervisor Password item press lt Enter gt 4 When a message confirming the password configuration appears in the Setup Notice window press lt Enter gt The supervisor password has been set Supervisor Password Clear The supervisor password is required to turn the User Password Clear S
11. mode when there is active IEEE802 11b equipment the data rate may be degraded Game and Program Related Windows Vista may not provide some functions properly when performing some applications especially games or may cause a problem due to a device driver compatibility issue For the latest device drivers and bug fixes please refer to the respective company s website Q 3D game does not work or some functions are not working A Change the graphics settings of the game to 2D or Software Renderer then run the program again Q game is not displayed smoothly on the screen A For 3D games the texture data for the 3D screen display is saved to the system memory If there is insufficient system memory the data is saved to the hard disk drive and loaded to memory when required This operation may temporarily stop displaying the picture on the screen In this case lower the game resolution or the screen settings Q A The picture on the screen is displayed as a broken image for some games A part of the picture on the screen may be broken when playing some games that require a high specification graphics card In this case set the 3D function setting for the game to a lower value or set the game resolution to a lower value Bluetooth A1 A2 A3 When no headset is found or cannot be connected If the headset is already connected to another device you will not be able to find t
12. 60 days after activation Product Specifications The system specifications may differ depending on the derived models For detailed system specifications refer to the product catalogue CPU Optional Intel Core 2 Duo Celeron processor POCO O OOOO OOO OLEH EHO EDO ESO E ESSE OOOO OSSD EES O ESOS SOS TESTES OSES OSES DEES DOES DE SSSEEOD SEED OSES OSES OSES OSES S OES O SEED OSES ESEO DEES EESED EES O SESE EES S ESOT OSES TEESE DEES O SEES ESSE ESO O OSES OSES DEES OSSOS SESE EOD OSES ESE OSES OSES DEES S ESOS SEES OESE OSES OSES DE SST TESTE EEE OSES DEES EEE EDEEEEEES eee Ree eee eee ECE CCC ECC eee ee CeCe eee ECE eC eC eee eee eee eC eRe Tee UCC eee reer ere rere er ere rererrererere errr ere reer er er ere er er err ere rere reer er ere reer er ere reer errr rere rer er eer er erere rr errr err rr errr err er er ereer errr reer errr ere reer er erreerer er errr rer er ere errr err rr errr errr rrr errr POOP Oo eee oe OOOH SEED OOO EEO O SEDO ESOS SEES ESSE OSES SESS OOS O SESE SESE TES O OSSD SESS E ESO SSE SEE ES ESOS OES OSES TEES OOTES OSES SEES OTTO OSES TOSS O SSO S SESE E SESE OES O TEST OSS OS SOS SESE ESTOS OES O SESE TESTES SS ESD OSES OSES O TESST ESOS TOSSES S ESOS OSES OSES ST ES OSS DSSS T ESSE SESE DOSES SESE DESO SEED OES PO Ceo r eres erere reser esses sees EHS OSES SEES ESSE ES ED ESSE SESE SESE ESSE SES OSES DESES SESE OSES EEES ESOS OSES DEES E OSES OSES ESSE EEES OSES ESOS E SEES ESSE ESSE ESOS OSES O EOE S SEES ESE SHE
13. 95mm Width X Height Physical Operating Specifications Temperature And Temperature Between 0 C and 70 C Maximum Humidity 85 Humidity KAJA Power 3 3V Specifications Compatibility IEEE 802 11b IEEE 802 11g Operating System Microsoft Windows XP Vista Network j ee a sda fesse esc EE A AO SEA PIII I notes ng T VEO P cea AIE AE VEA AN ET Specifications Media Access Protocol MAC Coccooocococooocococosocosocooocooocooocosoocooooosocoocoooocsooocoococooccoocoocosocoooooooocooocoocoooocooocoocosooooososooocooooococoooocooooccooooooosooooooooooooooosooosooooocooooooooocooocoocoooooooooocooocooooocoocooooooooooooo Sean _ Wired Equivalent Privacy support WEP 64bit 128bit WPA This device supports the Wireless LAN Security Specifications WPA Wi Fi Protected Access for Wi Fi To connect to a WPA wireless network you have to configure the settings according to the network connection environment For detailed setting information ask your network administrator E Radio Specifications RF Band 2 4GHz Supported Channels Channels allowed per country Device Transceiver POPS OEE SEE HEO HEE H OOH ETEEHEETEEESEEEE STOTT EEHEOEHEEESOSHESEOEEHTESEOHTEHHEEST OTS HETOTT ESTOS ESTES H ETFO THOTT THEO EEE OHOEHT OE EEEHTEHOLEHEETLOEEHTOEEEESETHEEHE HT EHHTOSE ESTOS ESTEE ETO SEOTT OTHE E ETOH HTETEHHHT HEHEHE EEECOEEE TOTES OTES HOES ESESEOSEESEOTEEELEOSEEETOREEBED PCCP eee eee eee eee EES EEE EEE EEE EEEEEEEEES
14. Center when clicking OK However you cannot use TV and Internet related functions using Express Setup 1 Turn the computer on Express Setup enables you to use the basic Click Start gt Windows Media Center or Start gt All Custom Setup allows you to configure all settings including TV and Internet settings If you click OK Programs gt Windows Media Center the Setup Wizard starts Internet Internet Explorer E mail Samsung Windows Mail Documents To get started with Windows Media Center select one of the following setup options m l Welcome Center Pictures Express setup Custom setup Music Run setup later gt i Windows Media Player Games a Windows Photo Gallery Windows Live Messenger Download Search Recent Items Windows DVD Maker Computer ep Windows Update Network Connect To To setup the TV or Internet after an Express Setup select Tasks gt Settings gt General gt Windows Media Default Programs Note Center Setup in the Media Center start screen and setup the following items Control Panel Help and Support 4 If you have selected Custom Setup continue with Changing the Media Center settings the setup according to the Setup Wizard instructions Y sii 3 You can change the settings by selecting Tasks If there are no installed TV tuner cards the TV Note gt Settings in the Media Center start screen after related setup steps will a
15. E p 103 By configuring the network settings IP address printer settings etc for each location you can immediately access the network without following the network setting procedures each time regardless of your location m You can diagnose the network status E p 104 Network Settings This section describes the procedures to connect to Click the Add button the Internet by setting up a network The setting up 3 procedures include procedures to add a printer to the network Select a network location icon and enter the name of the location e g Home Click the Next button 1 To use a wired LAN connect the LAN cable to the LAN port To use the wireless LAN you have to turn ait the wireless LAN on first by pressing the Fn 1 Select the icon and location name Select the icon and enter the location name keys If the wireless LAN is turned on the Wireless LAN LED lights up w O amp Cafe Conference School Organi j 2 Click Start gt All Programs gt Samsung gt Easy ee Network Manager gt Easy Network Manager Next Cancel 5 Select Direct Connection and click the Next button Add Location 2 Select the Internet connection type Connects to the Internet directly through a wired or wireless computer connection Back Next Cancel Select the LAN device setup the IP address and click the Next button 6 Add Location 3 Select the device wh
16. FAX in Sleep mode Standby Mode A To receive a FAX when the computer is in Sleep Mode Standby Mode the computer must be configured as follows The FAX program must be configured so that it receives FAXES automatically referring to the FAX program manual Click Start gt Control Panel gt Hardware and Sound Click on Phone and Modem Options In the Modem tab select an installed modem and click Properties In the Power Management tab of the Modem Properties window select the Wake up the computer with this device option and click the OK button If the Power Management tab does not appear select Change Settings in the General tab When the modem is configured as above and a FAX arrives the computer wakes up from Sleep Mode and receives the FAX Wired Network LAN Related Qane lt Wake On LAN gt function A1 lt Wake On LAN gt is a function that activates the system from Sleep mode when a signal such as a ping or magic packet command arrives over the network wired LAN Using the lt Wake On LAN gt Function 24 Click Start gt Control Panel gt Network and Internet gt Network and Sharing Center gt Manage Network Connections Right click on the Local Area Connection and select Properties Click Configure gt Power Management tab Select Allow this device to bring the computer out of standby then click OK Restart the system If the system wake up from Sleep mode
17. Gallery opens N View headlines Pagel of 1 Contacts Picture Puzzle Th Weather V Show details 2 If you double click on a gadget the gadget is added to the Sidebar You can move a gadget to another location by dragging it with the mouse Not only can you move a gadget onto the Sidebar but also out of the Sidebar Note f you place the mouse pointer over a gadget the close and option buttons appear egrceh all agodoet lt Search all gadg CO CPU Meter Currency Slide Show Stocks b Get more gadgets online Exiting the Sidebar Right click on the Sidebar icon By in the System Tray with the clock on the taskbar and select Exit to exit the Sidebar Open Bring Gadgets to Front Add Gadgets Properties Help EO A pap a Closing the Sidebar Even if you close the Sidebar the Sidebar continues running in the System Tray in the clock area though it is not displayed Note on the Desktop a To close the Sidebar right click over the Sidebar on the Desktop and select Close Sidebar To open the Sidebar again right click on the Sidebar icon By in the System Tray with the clock on the taskbar and select Open A window is the basic frame for a computer operation As an example let s see the layout of a Pictures Window Click Start gt Pictures The items and names may differ depending on your computer model and the Windows Vista version
18. Index 224 es Safety Precautions For your security and to prevent damage please read the following safety instructions carefully Since this is commonly applied to Samsung Computers some pictures may differ from actual product A Warning Failing to follow instructions marked with this symbol may cause personal injury and even fatality Installation Related Do not install the product in places exposed to humidity such as a bathrooms There is a danger of electric shock Use the product within the operating conditions specified in the Manufacturers User Guide Keep the plastic bags out of the reach of children There is a danger of suffocation Keep a distance of 15cm or more between the computer and the wall and do not place any objects between them This may increase the internal temperature of the computer and may cause an injury Do not install the computer on a slant or a place prone to vibrations or avoid using the computer in that location for a long time This increases the risk that a malfunction or damage to the product will occur Avoid exposing any part of your body to the heat from the computer vent for a long time when it is on Exposing a part of your body to the heat from the vent for long periods of time may cause a burn Avoid blocking the vent at the bottom or side of the computer when using it on a bed or cushion If the vent is blocked there is a danger of dama
19. Network Manager AutoMove AP Setting Connected Device None Connected Status Disconnected Add Location 1 Select the icon and location name Select the icon and enter the location name amp amp amp Library Office Cafe Conference School Organi a m Location Name House Next Cancel 3 The Network Connections window appears Click Start to start the network diagnosis When the diagnosis is complete a device with a problem is marked by a X mark icon with a description of the problem at the bottom of the window Connecting with a Modem Optional The procedures to connect to the Internet via a phone connection are described below Before You Start To connect to the Internet you have to subscribe to an Internet connection service of an Internet service provider ISP Amodem port is optional and provided for some models only Connect the phone cable to the Modem port Take care to not connect a digital phone line to the modem port NE 2 Connect to the Internet according to the instructions of your Internet service provider ISP If the Internet connection is terminated abnormally the connection is not released and the corresponding cost can be accrued Note Bluetooth Optional Bluetooth is wireless communications technology that allows access to nearby devices such as another computer a cell phone printer keyboard mouse etc without a ca
20. Note Window Layout 1 Address Display Line m 5 Window 2 Move Button i ex Button e IE gt SAMSUNG Pictures 6 Search Box 3 Toolbar BG Organize e Views jm Preview v E SlideShow Print E Email Be Share Burn Favorite Links Date taken Tags i 7 Sort Order IE Documents E Pictures y ad B Music E 8 Folder File 43 Recently Changed EB Searches Sample Pictures working i Public 4 Search Window Folders A y working Date modified 11 27 2006 11 55 AM Date created 11 27 2006 12 17 PM Bitmap Image Dimensions 1024 x 768 Size 2 25 MB 9 Detailed Information a Window 1 Address Display Line Shows the location of the currently selected folder or file POPPE SESE EEE ES EEEEE EE EEEEEEE EHO EEHE EEE EEEEE OES OLOHE ESE EEEEO SES OLEHE ESE EEEEOOESOLEHE ET EOEEEHEEEEEH ES OLEHTETEEEEEHESEEEHESOTEEEETEOEEEHEEEEEHESOEEHEETEOEEEHEEEEEH ESOT EHE ET EOEEEHESEEEHEEOTEHEEHEEHEEH TEESE EDETEHE EH EEEEEHELEEEHELELES ELE LESSEE EESEH EEE SESE ELEEEEHEOE LOH You can move to the previous or next page by clicking the Back or Next buttons 2 Move Button Opens the previously opened page Opens the next page when you have returned to a previous page COC C OC RO OEE EEE EEE HEHE LETHE HE EEEEHEHESEOEEEETEEEEEEE ESET EEE ET SOOETE HT SOOEEEESEOOEEE ET EOEEE TO EEEETHEETEEHETEEEE ETE EESETEEEEEE EE TEEEEETOEEEETEEETEEEE TEETH ETEEEHET HE ETEOEETEEEEE TO EEEETEEEEEEHEEEEEHETHEETETEEESEEHEEEEEEETH EST
21. OMY SASIC Veer hase word M CaSe 0 user account an emergency option Click the Browse button specify the path to save the password reset file to enter a password for resetting the password and The User Initialization Wizard screen appears click the Next button 1 Click the Next button If this screen does not appear click Start gt All Programs gt Infineon Security Platform Solution gt Security Platform Management gt User Settings 4 Personal Secret is going to be written to a file Specify the path and file name Infineon Security Platform User Initialization Wizard Basic User Password Reset Enable the reset functionality for my Basic User Password 2 Enter a password for the TPM program and click the Personal Secret locatio Next button Browse J Please keep this file in a safe location ou will need it if you have to reset your Basic l User Password in case of an emergency 8 Infineon Security Platform User Initialization Wizard 7 Basic User Password Set your password Please set your Basic User Password This password will protect your Basic User Key P 4 The operations to be performed appear Confirm the operations and click the Next button Confirm Password l Your password has to meet the following requirements J Length Between 6 and 256 characters Select the Security Platform Features to use and click the Next button Secure e mail Th
22. Please click on the Search for Updates ng so button to begin searching for new updates CyberLink DVD Suite NW Movie Player SAMSUNG MagicLoctor Watch with PowerDVD Multi Media Functions m CyberLink DVD Suite Optional Using this program you can use multimedia functions such as playing a DVD burning a DVD CD etc The CyberLink DVD Suite program is provided via the system software media or additional CD ROM Ep 115 E Play Camera Optional Using this program you can directly take pictures and record video on the computer amp p 118 Management Functions E Samsung Update Plus CAD Optional Samsung Update Plus is a software function that examines and updates the Samsung software and drivers installed on your Samsung computer to the most recent versions E p 119 E McAfee SecurityCenter M Optional This is a security solution that detects and removes computer viruses and protects the computer from Internet threats E p 121 E Easy Network Manager M Optional Easy Network Manager is a program that enables you to easily configure the network settings You can configure the network settings for each location and you can also diagnose the network status E p 101 Easy Battery Manager Optional Easy Battery Manager is a power management program that provides easy to use power management and power saving settings so that the battery usage
23. Scan begins At this time if a virus is found it is immediately healed during the inspection M McAfee SecurityCenter Am I Protected Yes Your computer protection services are enabled and up to date No action is required Click any category on the left to view details Lockdown Firewall Restore Firewall Defaults View Recent Events Alenia Manage Network Maintain Computer McAfee Virtual Technician E mail amp IM Attention My Account Parental Controls Components Installed McAfee VirusScan FiA Pasma Frend Last Scan No data available More Configure About Advanced Menu If a virus has been found click View Results 3 The viruses are listed Since the corresponding viruses have already been removed you can use your computer without any concern m For possible virus infections where it is not completely certain the Detected message appears In this case the items will be maintained or deleted depending on your decision To deal with new viruses please always keep McAfeeSecurityCenter up to date In general it is automatically updated when connected to the Internet Alternatively you can update it manually by clicking Update vaate after connecting to the Internet Configuring the McAfee Firewall The McAfee Firewall is configured for the product when purchasing the product in order to protect the computer from viruses However if the firewall is activated
24. To re enter Sleep mode after completing a reserved TV recording exit Media Center when leaving the computer A reserved TV recording is conducted regardless of whether Media Center is executed or not Caution Watching a recorded program Q Recorded files are saved in the Computer gt Local Disk C gt Users gt Common gt Recorded TV Note folder 1 Launch Media Center and select TV Movies 2 Select Recorded TV from the menu 3 Select a program you want to watch in the following window 4 Double click the program list or right click and select Play The selected recording is played Playing a DVD The procedures to watch a DVD title are described below 1 Launch Media Center 2 Press the Eject button of the DVD drive to open the tray and insert a DVD title If you insert a DVD title without starting Media N Center the Auto Play selection window appears Note Select Play DVD Video using Media Center and click OK 3 After a moment the DVD menu is displayed It the DVD menu is not automatically displayed select Play DVD in the start screen TV Movies pas play dvd 7d 4 Select Watch Movie or Play from the DVD menu The DVD title is played If you move the mouse the Play Control buttons appear Using the Play Control buttons you can play the DVD from a particular point or stop playing the DVD Online Media You can access more online content through Online Media Onl
25. all existing data and reinstall Windows install Windows according to the descriptions in Reinstalling when Windows does not start see page E 188 m The manual describes procedures on the basis of Windows Vista Home Premium Some pictures may differ from actual product m Since Windows Vista may be upgraded to increase performance some of the installation procedures may differ depending on the Windows Vista version This guide describes how to reinstall Windows on the basis of the latest version Windows Vista SP1 tv Reinstalling Windows may delete data files and programs saved on the hard disk drive Make sure to backup all important data Samsung Electronics shall not be held liable for any loss of data Caution Reinstalling in Windows 3 Since the installation step may differ depending on the Windows Vista version continue the installation 1 Insert the System Recovery Media into the DVD according to the following descriptions drive gt 3 1 If a window appears which allows you to When the AutoPlay window appears select Run select the operating system to install setup exe and click Allow click Next Step 4 follows J AutoPlay x q Sm AY Install Windows A Exa f g Select the operating system you want to install ma DVD RW Drive D LRMCFRE_KO_DVD F Always do this for software and games Windows Vista HOMEPREMIUM 02 11 2006 Open folder to view files fee using Windows Explorer The oper
26. and delete the Q Please note that even if you have copied confidential data to the PSD the original file is not protected by the PSD Restart the system and press the lt F2 gt key several times when the Samsung logo appears When the BIOS screen appears press the key to move to the Security menu Then press the key to move to the TPM Support item and set it to Enable Press the key to move to the TPM State press the key to move to the Change TPM State item and press lt Enter gt Press the key to move to the Clear item and press lt Enter gt Press the lt F10 gt key When the Setup Confirmation window appears select Yes and press lt Enter gt Restart the system and select Execute in the Physical Presence Operations At this time to cancel the initialization select Reject 144 Reconfiguring the TPM Chip To re use an initialized TPM chip you have to reconfigure it to the available status 1 2 Restart the system and press the lt F2 gt key several times when the Samsung logo appears When the BIOS screen appears press the key to move to the Security menu Then press the key to move to the TPM Support item and set it to Enable Press the key to move to the TPM State press the key to move to the Change TPM State item and press lt Enter gt Press the key to move to the Enable amp Activate item and press lt Enter gt Press the lt F10 gt key and i
27. and drivers installed on your Samsung computer to the latest version Before You Start To search for updates and update your computer using Samsung Update Plus your computer must be connected to the Internet a The update search result may differ depending on your computer model Samsung Update Plus does not provide updates for applications installed after purchasing the computer Note To update the software and drivers 2 If you click on Search for new updates new updates are searched for Click Start gt All Programs gt Samsung gt Samsung Update Plus gt Samsung Update Plus r Samsung Update Plus Samsung Updaterlus If this is the first time you are running the program N z z Samsung Update Plus automatically searches downloads and installs the most optimal versions of a window will appear aski ng you if you ag ree to the pre installed Samsung software and drivers for your system Please click on the Search for Updates Not agreement in the window Click Agree to use this ee ee ote software View Installed Updates User Settings Search for New Upd Exit SAMSUNG 3 If there are available software or driver updates for your computer the available updates will be listed Select the required updates from the list and click on Install Updates to start the update Note r Samsung Update Plus There are 7 updates available A OS Hotfix Fixing msvbvm60 dll problem Fi
28. be configurable This is normal This function is only available for old graphic chipsets Modem Related Q cannot hear the modem A1 Check if the phone line is properly connected to the modem A2 Check if the modem driver is properly installed Click Start gt Control Panel gt System and Maintenance gt Device Manager gt Modem and then check if the model is not marked with a yellow exclamation mark If it is marked with an exclamation mark it means that the modem driver is not properly installed In this case remove the installed driver and install the driver again if the modem is not marked with a yellow exclamation mark double click the installed modem and select Diagnosis tab gt Query modem to diagnose the modem If there is no reaction to the command it means the modem is out or order In this case restart the system or reinstall the modem driver and then diagnose the modem again Close all applications using the modem before diagnosing the modem A When you are unable to make a call when using a switchboard In general the dial tone of a switchboard or a digital phone switching system is not continuous unlike that of a PSTN line Therefore the modem may not make a phone call as it misreads the dial tone as a busy tone In this case perform the following Use the AT Command Add the ATX3 command for initialization Alternatively enter the ATX3 command first before make a phone ca
29. configured wireless and wired connections but they do not to a fixed IP address select Use the following IP work properly address in the TCP IP Properties of the wireless adapter configure the items as follows and try again A You cannot use wireless and wired connections IP 10 0 0 1 10 0 0 254 Subnet Mask UAINE PARCA AEAEE tose denial tee both the wired and wireless connections with the Sa same IP address you need to set the currently not It is recommended using a fixed IP address for needed connection to Do Not Use in the Network wireless Ad Hoc network connections Connections of the Control Panel A3 You have to register the IP address allocated for the wireless adapter as a Trusted IP in McAfee SecurityCenter e Click McAfee SecurityCenter gt Advanced menu gt Configure gt Internet and Network gt Advanced gt Trusted and Banned IPs and register the IP address or IP address range as a Trusted IP address Qis wireless LAN does not work properly when there is a device operating on an adjacent frequency in the vicinity of the product A1 Channel interference may occur when a wireless video transceiver or a microwave oven is being used If you experience channel interference from other equipment we recommended changing the channel for connecting to the AP For more information about AP settings refer to the User Manual supplied by the AP manufacturer A2 Since IEEE802 11g equipment operates in hybrid
30. connection device and then click the Detail button you can view the IP information If the IP is not allocated properly the IP address will be displayed as follows e g 169 254 XXX XXX If the network does not provide DHCP you have to specify the correct IP address by asking your network administrator Even if the network provides DHCP the server may not allocate an IP address to the client properly and the client station cannot connect to the network e When it is represented as Connected but you cannot connect to the Internet This means the computer is connected to the AP but the AP or external network connected with the AP may have a problem e When the There is no wireless LAN adapter message appears or there is no wireless LAN icon This means the wireless LAN device is set to Do Not Use or the device is not recognized Check if the wireless device is properly recognized in the Device Manager window If the device is set to Do Not Use right click and select Use from the pop up menu A2 Verify whether the same network key encryption key has been entered for both the AP and the computer The network key is an encryption key for encrypting the data transmitted between the AP and the computer It is recommended setting the network key manually gt Check the AP Settings For the AP settings refer to the User Guide provided by the AP manufacturer A3 Verify whether the environment is suitable for using a wir
31. cord out by pulling the cable All power cord sets must be approved by an acceptable only accredited agency responsible for evaluation in the country where the power cord set will be used m The power cord set must have a minimum current capacity of 7 Aand a nominal voltage rating of 125 or 250 volts AC as required by each country s power Power Cord Requirements system m The appliance coupler must meet the mechanical The power cord set wall plug cable and AC adapter plug configuration of an EN 60 320 IEC 320 Standard Sheet you received with your computer meets the requirements C7 connector for mating with appliance inlet on the for use in the country where you purchased your computer equipment Power cord sets for use in other countries must meet the requirements of the country where you use the computer For more information on power cord set requirements contact your authorized dealer reseller or service provider 24 i Regulatory Compliance Statements Wireless Guidance Low power Radio LAN type devices radio frequency RF wireless communication devices operating in the 2 4 GHz Band may be present embedded in your notebook system The following section is a general overview of considerations while operating a wireless device Additional limitations cautions and concerns for specific countries are listed in the specific country sections or country group sections The wireless devices in your system
32. etc for each location you can immediately from the menu The available APs are represented access the network in one click without performing the as icons If you double click an AP icon to connect network setting procedures regardless of your location to the computer is connected to the AP through the wireless LAN and you are moved to the Click Start gt All Programs gt Samsung gt Easy conesponding location Network Manager gt Easy Network Manager when connected to the Internet Click the AP Setting menu item at the top of the screen and double click one of the available APs 2 Select an icon that represents the corresponding location from the Saved Locations window and then click Move If the Internet connection is a wired LAN you 3 can immediately load the settings for the new location and the corresponding network connection information is displayed in the Current Location Information window iati Available AP Icon a PC Icon S The closer to the PC icon at the bottom of the screen the stronger the signal from the AP is Note while the further from the icon the weaker the signal strength is a If a network key is required request the key from your network administrator Diagnosing the Network Status You can diagnose the network state and find solutions for why you cannot connect to the network 1 Launch Easy Network Manager 2 Select Diagnosis from the menu kd Easy
33. even though there is no received signal use the system after disabling the lt Wake On LAN gt function The LAN LED may not be turned off if System is shutdown without disabling the WOL Wake on LAN option Connecting a wired LAN while using a wireless LAN may not activate the lt Wake On LAN gt function Set the Wireless LAN to Disable to use the lt Wake On LAN gt function Q Click Start gt Control Panel gt Network and Internet gt Network and Sharing Center gt Manage Network Connections Right click on the Wireless Network Connections and select Disable When I am connected to a 100Mbps 1Gbps wired LAN and the computer exits Sleep hibernation mode a message appears informing you of a connection to a 10Mbps 100Mbps wired LAN When the computer exits standby hibernate mode restoring the network takes about 3 seconds When the network is restored it operates at 100Mbps 1Gbps Wireless Network WLAN Related Q cannot find an AP A Verify whether the Wireless LAN LED is on If it is turned off turn it on by pressing the Wireless LAN On Off button Fn f Qiie Wireless LAN device is operating properly but cannot connect to the Internet or to another computer gt This is due to an incorrect configuration or a configuration error Check the following A1 When connecting to a wireless Ad Hoc network check if the network name SSID is the same A2 If a network key encryption key
34. example you can set the time the computer waits before entering Standby Mode or before the monitor or hard drive turns off The settings are saved as a power scheme Quick Launch This refers to a toolbar that can be configured so that you can launch a program such as Internet Explorer or display the Windows Desktop with one click You can add any icon to the quick launch area of the Taskbar and launch frequently used program by clicking that icon Server In general a server refers to a computer that provides shared resources for network users Share This refers to setting a resource of a computer such as a folder or printer so that other users can also use it Shared Folder A folder that can be used by other users on the network Network Administrator A user who plans configures and manages network operations Sometimes a network administrator is called a system administrator Sleep Mode A power mode that enables computers to save power consumption when they are not being used When a computer is in Sleep Mode the data on the computer memory is not saved to the hard disk If the power is tuned off the data in memory will be lost System File system Files refer to files that are read and used by the Windows operating system In general system files must not be deleted or moved USB Universal Serial Bus This refers to a serial interface standard developed to replace the conventional interface stand
35. grounding part Failing to do so may cause electric shock hazard Make sure to have the product tested by a safety service engineer after repairing the product Authorized Samsung Repair Centers will carry out safety checks after a repair Using a repaired product without testing it for safety might cause an electric shock or fire In case of lightning immediately turn the system off disconnect the power cord from the wall outlet and phone line from modem Do not use a modem or phone There is a danger of electric shock or fire Do not use your computer and AC Adapter on your lap or soft surfaces If the computer temperature increases there is a danger of burning yourself Connect only permitted devices to the connectors or ports of the computer Failing to do so may cause electric shock and fire Close the LCD panel only after checking if the notebook computer is turned off The temperature may rise and it may cause overheating and deformation of the product Do not press the Eject Button while the Floppy Disk CD ROM drive is in operation You might lose data and the disk might be suddenly ejected and could cause an injury A 14 Take care not to drop the product while using it This may cause personal injury or loss of data Do not touch the antenna with electricity facility such as the power outlet There is a danger of electric shock When handling computer parts follow th
36. if there are 2 graphic cards present even when there is only one you can set the resolution and color for each display device Selecting Dual View Check if the external display device is properly connected and follow the instructions below Click the Start gt Control Panel gt Appearance and Personalization gt Adjust screen resolution Click on the number 2 monitor icon and select Extend the desktop onto this monitor Click Apply and then click the OK button Display Settings Monitor Drag the icons to match your monitors Identify Monitors 1 This is my main monitor Resolution Low Highest 32 bit 1024 by 768 pixels How do I get the best display When notebook LCD is set as the main device the 1 digit is displayed over it and the 2 digit is displayed over the auxiliary display device Now you can expand the Desktop screen over 2 display devices When using Dual View it is recommended setting the LCD as the main device number 1 Display Settings Drag the icons to match your monitors If the resolution of the auxiliary display device is 640x480 pixels with 256 colors click the Start gt Control Panel gt Appearance and Personalization gt Adjust screen resolution gt Monitor Number 2 and adjust the resolution and color quality Using Window in Dual View Click on the window title bar of the main LCD monitor number 1 and drag it into the auxiliary display device mo
37. inches between the wireless device and the body for use of a wireless device near the body this does not include extremities is typical This device should be used more than 20 cm 8 inches from the body when wireless devices are on The power output of the wireless device or devices which may be embedded in your notebook is well below the RF exposure limits as set by Industry Canada 30 This transmitter must not be collocated or operate in conjunction with any other antenna or transmitter except the installed Bluetooth transmitter Operation of this device is subject to the following two conditions 1 This device may not cause harmful interference and 2 this device must accept any interference received including interference that may cause undesired operation of the device To prevent radio interference to licensed service this device is intended to be operated indoors and away from windows to provide maximum shielding Equipment or its transmit antenna that is installed outdoors is subject to licensing Caution Wireless devices are not user serviceable Do not modify them in any way Modification to a wireless device will void the authorization to use it Contact manufacturer for service Caution Telecommunications per DOC notice for products fitted with an IC compliant modem The Industry Canada label identifies certified equipment This certification means that the equipment meets certain tel
38. interconnected networks The LAN device driver may differ depending on N your LAN device model To add a network component click Install in the screen shown in the figure above You can add clients services and protocols Configure the IP settings When using DHCP select Obtain an IP address automatically To use a static IP address select Use the following IP address and set the IP address manually Internet Protocol Version 4 TCP IPv4 Properties Alternate Configuration You can get IF settings assigned automatically if your network supports this capability Otherwise you need to ask your network administrator for the appropriate IP settings Obtain an IP address automatically 6 Use the following IP address IP address Subnet mask Default gateway Obtain DNS server address automatically Use the following DNS server addresses Preferred DNS server Alternate ONS server When not using DHCP ask your network administrator for the IP address Note When you have completed the settings click the OK button The network settings have been completed Using both DHCP and a fixed IP simultaneously Using the Alternate Configuration providing by Windows Vista you can set both automatic and fixed IP addresses and then you can select to use either of them to connect to the Internet 1 Click Start gt Control Panel gt Network and Internet gt Network and Sharing Center and click M
39. is used the AP Access Point and wireless Ad Hoc network keys must be the same The AP network key can be configured using an AP management program For more detailed information ask your network administrator or product provider A3 Check that the device driver is installed properly If the driver is not properly installed you will find a yellow exclamation mark on the network icon by clicking Start gt Control Panel gt System and Maintenance gt Device Manager gt Network Adapter The signal strength is excellent but I cannot connect to the network I cannot connect to the AP gt Even if the signal strength is excellent the gt Check the Computer Settings network connection may not operate properly if the TCP IP properties are not properly configured or the network key encryption key A1 Select Start gt All Programs gt Accessories gt Windows Mobile Center and check the wireless device status is incorrect e When it is represented as Disconnected This means A Check that the TCP IP properties are configured the computer is not connected to the AP Check the properly When connecting to an AP right click the status of the AP referring to the descriptions of the Network Connections g icon on the taskbar and Checking the SP Settings section below Check select Network and Sharing Center If you click the the encryption key configured in the AP and retry to View Status next to a connected wireless network the
40. manufacturer about the problem If you request our services to resolve a problem caused by incompatible software a service charge will be applied About the Product Capacity Representation Standard About HDD Capacity Representation The capacity of the storage device HDD SSD of the manufacturer is calculated assuming that 1KB 1 000 Bytes However the operating system Windows calculates the storage device capacity assuming that 1KB 1 024 Bytes and therefore the capacity representation of the HDD in Windows is smaller than the actual capacity due to the difference in capacity calculation E g For a 80GB HDD Windows represents the capacity as 74 5GB 80x1 000x1 000x1 000 byte 1 024x1 024x1 024 byte 74 505GB In addition the capacity representation in Windows may be even smaller because some programs such as Recovery Solution may reside in a hidden area of the HDD About Memory Capacity Representation The memory capacity reported in Windows is less than the actual capacity of memory This is because BIOS or a video adapter uses a portion of memory or claims it for further use E g For 1GB 1 024MB memory installed Windows may report the capacity as 1 022MB or less Contents Chapter 1 Getting Started sie Vista Screen Layout ts Chapter 6 Settings and Upgrade esktop Product Features 2 Sake doei is LCD Brightness Control 148 Before You Start 3 Window J 80 BIOS Setup 150 Contents 6 Entering the BIOS Setup 150 Con
41. off by pressing and holding the Power Note When running the computer on battery power the a l A i i i Button for a minimum of 4 seconds LCD brightness is dimmed automatically to save Caution battery power Please note that turning the computer off by this Press the Fn t key to increase the LCD method may cause a system problem Thereafter brightness E p 46 when turning the computer back on the disk When turning the computer on for the first time checking program may launch to check for and the Register Windows screen appears You can correct any disk errors use the computer after registering your user information 42 Chapter 2 Using the computer Keyboard Touchpad CD Drive ODD optional Inserting and Ejecting a CD Burning a CD Blu Ray Optional Multi Card Slot PC Card Slot Connecting a monitor TV Connecting a Monitor Connecting a TV Viewing Through a Monitor TV Using Dual View Adjusting the Volume Intel Turbo Memory Device Optional Check before installing another operating system such as Windows XP Q amp A 44 47 50 50 gl 52 54 57 58 58 59 60 63 65 67 68 69 Keyboard Shortcut key functions and procedures are discussed in the following sections m The keyboard is supplied according to the corresponding country m The keyboard image may differ from the actual keyboard Shortcut Keys You can use the following functions by pressing the keys below with
42. on and press the F2 key when the booting screen SAMSUNG logo appears 2 After a moment the SETUP screen appears Enter the Advanced menu in SETUP 3 Move to the AHCI Mode Control item and press Enter Q How does Intel Turbo Memory work A Intel Turbo Memory enhances memory performance and reduces the power consumption by minimizing the number of hard disk drive read and write operations through the inter operation of the installed device driver and the embedded flash memory Q Can I use Intel Turbo Memory in Windows XP A Since Intel Turbo Memory uses performance enhancement functions provided by Windows Vista you cannot use this function in Windows XP Chapter 3 Using Microsoft Windows Vista About Microsoft Windows Vista Welcome Center Help and Support Windows Vista Screen Layout Desktop Start Menu Sidebar Gadget Window Control Panel Opening the Control Panel User Accounts Phishing Filter User control function Windows Mobile Center 71 71 eZ 73 13 aS 11 80 83 83 85 90 92 94 The screen shots used in this chapter may differ from actual screens depending on the Windows Vista version and model About Microsoft Windows Vista Microsoft Windows Vista hereafter Windows is a computer operating system Since you have to learn how to use it in order to use the computer efficiently and effectively use the Welcome Center and Windows Help and Support to learn about Windows Vist
43. on the Desktop become smaller and more items can be displayed on the screen The higher the color quality the more colors are displayed on the screen Click Start gt Control Panel gt Appearance and Personalization gt Personalization gt Display Settings Alternatively right click on the Desktop and select Personalization gt Display Settings from the pop up menu The Display Settings screen appears Change the resolution and color settings and click the OK button You can check the graphics chipset To change the resolution slide the resolution sliding bar to a particular resolution LCD Type Note WXGA Resolution 1280 x 800 Display Settings wont Drag the icons to match your monitors POOOOCOOOO ON This is my main monitor Extend the desktop onto this monitor Resolution Low 5 1024 by 768 pixels How do I get the best display Identify Monitors Highest 32 bit v Advanced Settings Color Quality Very High 32bit To change the color quality click this button and select a particular quality The following resolutions and color qualities are recommended according to the computer LCD panel type Configuring the Start Menu Power Button 3 Click on Change Advanced Power Settings and open Start Menu Power Button in the Power The Power button on the Start menu a performs SUNONS ane Piaiem various operations depending on the setting
44. powered by non removable rechargeable batteries Pa Caution _ inthe garbage The laser devices in these components are classified a as Class 1 Laser Products under a US Department of Health and Human Services DHHS Radiation Performance Standard Should the unit ever need servicing contact an authorized service location Laser Safety Note Use of controls or adjustments or performance D All systems equipped with CD or DVD drives comply with Contact the Samsung Helpline for information on how to dispose of batteries that you cannot use or recharge any longer Follow all local regulations when disposing of old batteries RH En E a E tg IS Caution of procedures other than those specified in i this manual may result in hazardous radiation Caution DISPOSE OF USED BATTERIES ACCORDING TO exposure To prevent exposure to laser beams THE INSTRUCTIONS do not try to open the enclosure of a CD or DVD drive Class 1M laser radiation when operating part is open Do not view directly with optical instruments Class 3B invisible laser radiation when open Avoid exposure to the beam 2O General Requirements Connect and Disconnect the AC adapter The requirements listed below are applicable to all countries The socket outlet shall be installed near the equipment m The length of the power cord set must be at least 6 00 and shall be easily accessible feet 1 8m and a maximum of 9 75 feet 3 0m Do not unplug the power
45. sensor on again click the Turn on imen button The Easy ALS Manager program is optional and may not be provided depending on the computer model fa user controls the LCD brightness with the keyboard the ambient light sensor is turned off and the brightness set by the user remains until the computer restarts BIOS Setup The BIOS Setup enables you to configure your computer hardware according to your needs Before You Start a Use the BIOS setup to define a boot password change the booting priority or add a new device Since incorrect settings may cause your system to malfunction or crash take care when configuring the BIOS The functions of the BIOS setup are subject to change for product function enhancement purposes The BIOS Setup menus and items may differ depending on your computer model Note Entering the BIOS Setup 1 Turn the computer on 2 When the booting screen SAMSUNG logo appears press the F2 key to enter the BIOS Setup F2 SETUP F12 PXE Boot ESC Boot Menu M T 3 Setup Menu Main Advanced System Time System Date SATA Port 1 SATA Port 2 CPU Type CPU Speed Total Memory Slot Memory Slot2 Memory Graphics Memory BIOS Version MICOM Version Setup Items Security 10 21 53 07 30 2004 annnaaan annnaanan AARRANAN H nn GHZ HAA MB RRR MB Not Installed Auto Shared AAAAAAAR HHH After a moment the BIOS setup screen appears B
46. side place it so that the vents face upwards Failing to do so may cause the internal temperature of the computer to rise and the computer to malfunction or halt Do not place a heavy object over the product This may cause a problem with the computer In addition the object may fall and cause injury or damage the computer Battery Usage Related Dispose of worn out batteries properly There is a danger of fire or explosion The battery disposal method may differ depending on your country and region Dispose of the used battery in an appropriate way Do not throw or disassemble the battery and do not put it into water This may cause an injury fire or explosion Use only a battery authorized by Samsung Electronics Failing to do so may cause an explosion Avoid contact with metal objects such as car keys or clips when keeping or carrying a battery S Contact with a metal may cause excessive current and a high temperature and may damage the battery or cause a fire Charge the battery according to the instructions in the manual Failing to do so may cause an explosion or fire from damage to the product Do not heat the battery or expose it to heat e g inside a vehicle during the summer There is a danger of explosion or fire Usage Related Do not place a candle light cigar etc over or on the product There is a danger of fire Use a wall outlet or multi plug with a
47. the battery capacity and the remaining battery charge Using the Security Lock Port You can connect a Kensington lock to the Security Lock port to prevent your computer from being stolen when you have to use the computer in a public place To use this feature you have to purchase the Kensington lock additionally To use the Kensington lock refer to the product manual Tie the Kensington lock cable to a fixed object and install the other end of the cable to the Security Lock port Chapter 7 Connecting and Setting Up Media Center Connecting Devices Media Center Setup Using Media Center Start Screen Layout Pictures Videos Music TV Movies Windows Media Center About Package Contents and the Program Guide 166 167 167 168 170 170 171 175 179 Windows Media Center is provided for some versions of Windows Vista only Therefore this chapter is for models with Windows Media Center only About Package Contents and the Program Guide About the Package Contents The package contents of your Samsung computer may differ depending on the computer model A TV tuner card is not supplied with the product and is not essential for the Media Center However you can only use the TV function of the Media Center when a TV tuner card has been installed About the Program Guide An electronic TV program guide the Electronic Program Guide EPG is provided by the EPG provider and the contents of the EPG may diffe
48. the Fn key Esc F2 F3 F4 F5 F6 F7 F8 F9 F10 F11 F12 2 F gt Slo tt A a Y Fn Name Function Esc REST 2 Switches to Sleep mode To wake the computer up press the Power button Sleep Mode F2 Shows the remaining battery charge You can only use this function when the Easy Display Manager program is installed F3 Enters the Euro monetary unit symbol This key may not be provided depending on the keyboard type F4 Switches the screen output to the LCD or external monitor when an external monitor or TV is connected to the computer E p 60 a Backlit Turns the LCD backlight on or off Fnt Name Function nx Mute Mutes or cancels mute F7 Samsung Magic System diagnosis recovery and Internet consultation program Samsung Magic Doctor will be Doctor launched You can select operation mode when you need maximum system performance or low noise low power consumption with one click Easy SpeedUp m Silent Low noise and low power consumption mode Pi M Normal Normal Mode ease m Speed Maximum performance mode The system operates in its maximum performance and system resources are allocated to the currently active program with priority for maximum performance y Wireless LAN Turns the wireless LAN function on or off in models with wireless LAN capability Fo Touchpad Turns the Touchpad function on or off p When using an external mouse only you can turn the Touchpad off Num Lock Tur
49. to 1024x768 pixels recommended gt Click the Graphics Related tab Change The shortcut icons are not displayed on the Resolution Change Display Device Remove the screen even if press the shortcut key AC Adapter Restart the System Change Power Scheme A The shortcut icons only appear when the Easy A This may happen while the video driver is examining Display Manager program is installed the connected device While the detection process is busy any connected display devices may blink or some noise may occur Q have connected a monitor or projector to the computer but the colors on the monitor are abnormally displayed A Check if the monitor and computer are properly connected with the signal cable and reconnect the cable if necessary Q am trying to view the screen through a TV by connecting it through the HDMI port but the edge of the screen is not displayed A Itis recommended using a notebook computer screen or monitor for documents and Internet pages Although connecting via the HDMI port is recommended when watching video it may be inappropriate for displaying documents and Internet pages because most TVs that support HDMI fail to display the edge of the screen or the characters on the screen properly Q cannot configure the Image Sharpness in the NVIDIA Control Panel of NVIDIA Graphics A The NVIDIA Control Panel gt Adjust desktop Color Settings gt Image Sharpening item is set to None and will not
50. to the Since an ODD Optical Disk Drive is optional the USB port such as a keyboard mouse installed drive depends on the computer model digital camera etc E p 50 n N 38 4 DC Jack A jack to connect the AC adapter that supplies power to the computer 2 Wired LAN Port Connect the Ethernet cable to this port E p 96 4 Monitor Port A port used to connect a monitor TV or projector supporting a 15pin D SUB interface E p 58 3 Fan Vents 8 PC Card Slot The internal heat of the computer is emitted through these holes Install the PC card into this slot E p 57 EN If the vents are blocked the computer may overheat Avoid blocking the vents as this may be dangerous Caution T Headphone Jack A jack used to connect 5 Digital Video Audio Port HDMI the headphones You can connect an HDMI cable to this port Using this port you can enjoy digital video and 6 Microphone Jack audio on the TV A jack used to connect the microphone 39 1 Serial Port Optional You can connect a serial device to the serial port To use the serial port open up the rubber cap on the port 4 Battery This is a Lithium lon rechargeable battery that supplies power to the computer E p 159 3 USB Port You can connect USB devices to the USB port such as a keyboard mouse digital camera etc 2 Security Lock Port You can connect a Kensington lock to the Security Lock Port to prevent the computer from being stolen
51. use the computer until you enter the password cocococococococoooooocococococccoooococococosooococoococococcooocococosoccocoococooooocoosoooooocooooococooooooooooooocoocooooooocooooocoosoooooocoooocooosoooooocooooococsoocoooococooocoosoooooocooosocoosoooooocoocoocoococoooococococoosoooooocooococoosooooooocoooooocooocooooooo Power Menu Button nina Click the Power Menu button to shut down restart and logoff from the computer Sidebar Gadget Sidebar is a vertical bar that appears at the side of the Desktop A mini program called Gadget runs over the Sidebar which shows information such as stocks schedule weather etc and provides frequently used tools You can download various Gadgets from the Internet other than the default Gadget Sidebar Gadget Structure If you launch Windows the Sidebar is automatically launched and the Sidebar and Gadget appear at the side of the Desktop Gadget Sidebar KO s lt 0 12 10 PM Sidebar to launch it manually Ifthe Sidebar is not launched automatically when Windows starts click Start gt All Programs gt Accessories gt Windows Note a To always display the Sidebar right click over the Sidebar and select Properties and then select the Sidebar is always on top of other windows option in the Arrangement field Adding a Gadget You can find a gadget in the Gadget Gallery and add it to the Sidebar 1 If you click the at the top of the Sidebar the Gadget
52. user is not included in the coverage the recommendation is to be applied according to the user s needs Note Proper Posture To use the computer while talking over the telephone M use a headset Using the computer with the phone on Adjust the heights of desks and chairs appropriate to your shoulder is bad for posture your height m Keep frequently used items within a comfortable work The heights are to be adjusted so that your arm forms a range where you can reach them with your hands right angle when you place your hand over the keyboard while sitting down on a chair Adjust the height of chair so that your heel is comfortably placed on the floor m Do not use the computer while you are lying down but only while you are sitting down m Do not use the computer on your lap If the computer temperature increases there is a danger of burning yourself m Work while keeping your wrist straight m Use a chair with a comfortable back m Keep the center of your leg weight not on the chair but on your feet when you are sitting on a chair 18 Eye Position Hand Position Keep the monitor or LCD away from your eyes by at Keep your arm at a right angle as shown by the figure least 50cm Adjust the height of the monitor and the LCD screen so m Keep the line from your elbow to your hand straight that its top height is equal to or lower than your eyes Do not place your palm over the keyboard while typing m Avoi
53. wireless devices because their signals could interfere with critical aircraft instruments Caution 2 Other Wireless Devices Safety Notices for Other Devices in the Wireless Network Refer to the documentation supplied with wireless Ethernet adapters or other devices in the wireless network The Part 15 radio device operates on a non interference basis with other devices operating at this frequency Any changes or modification to said product not expressly approved by Intel could void the user s authority to operate this device Caution Unintentional Emitter per FCC Part 15 This device complies with Part 15 of the FCC Rules Operation is subject to the following two conditions 1 this device may not cause harmful interference and 2 this device must accept any interference received including interference that may cause undesired operation This equipment has been tested and found to comply with the limits for a Class B digital device pursuant to Part 15 of the FCC Rules These limits are designed to provide reasonable protection against harmful interference in a residential installation This equipment generate uses and can radiate radio frequency energy and if not installed and used in accordance with the instructions may cause harmful interference will not occur in a particular installation If this equipment does cause harmful interference to radio or television reception which can be determined by turning the
54. within the computer may cause electric shock or fire hazard Battery Usage Related Keep the battery out of the reach of infants and pets as they could put the battery into their mouths There is a danger of electric shock or choking Usage Related Disconnect all cables connected Do not place any container filled If the computer is broken or to the computer before cleaning with water or chemicals over or dropped disconnect the power it If you are cleaning a notebook near the computer cord and contact a service center computer remove the battery E CHeMmiCcICenicrihe for a safety check There is a danger of electric shock computer this may cause fire or Using a broken computer may or damage to the product electric shock cause electric shock or fire hazard Avoid direct sunlight when the computer is in an air tight location such as inside a vehicle There is a danger of a fire hazard The computer may overheat and also present opportunity to thieves Do not connect a phone line connected to a digital phone to the modem There is a danger of a electric shock fire or damage to the product 10 Upgrade Related ear SS e Never disassemble the power supply or AC adapter There is a danger of electric shock When removing the RTC Real Time Clock battery keep it out of the reach of children as they could touch and or swallow it There is a danger of choking Ifa child has swallowed it con
55. 02 Driver Info Realtek High Definition Audio Network Driver Info Manufacturer Intel Version 9 6 8 0 Driver Info Intel R PRO 1000 PL Network Connection I OmniPass Fingerprint Identification Integrated Password Authentication Optional Using the OmniPass program you can use the following functions Fingerprint Identification Function You can register your fingerprint and use it instead of a password Integrated Password Authentication Function You can use your Windows user account information using the Integrated Password Authentication Function If you register your Windows user account s information with the OmniPass program you can login to Windows or onto websites using a single password Q Before You Start The program versions described in this manual are subject to change and the screen images and terms in this manual may differ from actual ones This function is applied to some models only Y The program version described in this manual is subject to change and some functions may not be provided due to restrictions in the program The OmniPass program is already installed on your computer or is provided with your System Software Media or additional CD for manual installation For more detailed information on the usage procedures refer to the Help section in the OmniPass program Fingerprint Identification Integrated Password Authentication Signing Up Click Run Enrollment Wizard to s
56. 15pin Connecting to the HDMI port 1 Connect it to the HDMI port of the TV using an HDMI cable 2 Switch the TV s external input to HDMI If the TV has more than one HDMI port connect it to the HDMI port labeled DVI IN Note Viewing Through a Monitor TV You can switch the display device using the shortcut key LCD Notebook Screen Q CRT External Monitor Screen Switching the Display Device using the Note HDMI TV Screen or Monitor when it is connected via the HDMI port Shortcut Key LCD CRT Clone Notebook External Monitor Screen Press the Fn 2 key combination once Then the LCD CRT DualView Notebook External Monitor Easy Display Manager screen appears in which you can Screen in Dual View select a display device LCD HDMI Clone Notebook TV or Monitor Screen Whenever you press the 22 key while holding down the LCD HDMI DualView Notebook TV or Monitor Fn key the selected option is changed Screen Dualview What is Dual View Dual View is a function that enables you to view a computer screen over two display devices It is convenient when you need a wide screen enue NA LCD CRT DualView The TV screen is only supported for models that support the TV output port HDMI Example Selecting LCD CRT Dual View Caution Simultaneous output to all 3 LCD CRT HDMI is not supported TV output is not supported in the DOS Command Prompt window
57. 2 400 2 4835 GHz for indoor use 2 400 2 454 GHz channels 1 to 7 for outdoor use For Guadeloupe Martinique St Pierre et Miquelon Mayo tte 2 400 2 4835 GHz for indoor and outdoor use For Reunion Guyane 2 400 2 4835 GHz for indoor use 2 420 2 4835 GHz for outdoor use channels 5 to 13 34 European Telecommunication Information for products fitted with EU approved modems Marking by the symbol CE indicates compliance of this equipment to the Radio and Telecom Terminal Equipment Directive 1999 5 EC Such marking is indicative that this equipment meets or exceeds the following technical standards CTR 21 Attachment requirements for pan European approval for connection to the analogue Public Switched Telephone Networks PSTNs of TE excluding TE supporting voice telephony services in which network addressing if provided is by means of Dual Tone Multi Frequency DTMF signaling Although this equipment can use either loop disconnect pulse or DTMF tone signaling only the performance of the DTMF signaling is subject to regulatory requirements for correct operation Caution It is therefore strongly recommended that the equipment is set to use DTMF signaling for access to public or private emergency services DTMF signaling also provides faster call setup This equipment has been approved to Council Decision 98 482 EEC CTR 21 for Pan European single terminal connection to the Public Swit
58. 2015 Encrypting File System Infineon TPM Cryptogra Private Key Cryptographic provider Infineon TPM Cryptographic Provider Key size 1024 Bits TPM generated key Yes Exportable Strong private key protection No 10 Construct an Infineon Security Platform Personal Secure Drive PSD Select a drive in the My PSD will be mapped to drive field and enter a drive label in the Drive label for my PSD and click the Next button 8 Infineon Security Platform User Initialization Wizard Security Platform Features Configure your Infineon Security Platform Personal Secure Drive Your Personal Secure Drive PSD provides protected store for sensitive data It appears as an additional disk on your computer and is not visible to other users Please move existing files and folders to your PSD to protect them You will not be able to change the storage space of your PSD after this drive has been created My Personal Secure Drive will be mapped to drive Ca Drive label for my Personal Secure Drive Personal Secure Drive C Load my Personal Secure Drive at logon The screen below appears when selecting the File and folder encryption with the Personal Secure Drive PSD feature When not selecting this feature the screen for Step 12 or 13 appears 1 Select the disk space for My Personal Secure Drive And select a drive to save My Personal Secure Drive to and click th
59. 40 Bottom View 1 Battery Latches The latch used to remove or install the battery E p 159 2 P Dock Connector Optional You can connect a Docking Station that provides additional ports 3 Hard Disk Drive Compartment Cover 4 Memory Compartment Cover The hard disk drive is installed inside the cover The main memory is installed inside the cover E p 157 FPF y 41 I Turning the Computer On and Off Turning the computer on Turning the computer off 1 Install the battery and connect the AC adapter 1 Click the Start gt button on the taskbar Refer to the Installation Guide 2 e e paN ELp Click the E and click on Shut down The computer will shut down Switch User Press the Power button to turn the computer on Connect To Control Panel Log Off Default Programs Lock Restart All Programs Help and Support Sleep 1 Power 2 3 Button 4 Power button LED is lit while the computer is turned Before Using the Power Button On Since the Power Icon is set to power saving mode Note selecting Start gt Power Button Gi will cause the computer to enter Sleep mode To shut down the computer by clicking this icon refer to the descriptions for Setting up Start menu power button of the Control Panel E p 88 If you press and release the Power button on N the computer when it is on the computer enters If the system cannot be shut down due to a system Sleep mode error turn it
60. Adjusting the TV Screen Size If the Desktop screen displayed on the TV does not fit to the TV screen configure it as follows depending on the graphics card You can view the graphics card type by selecting Start gt Control Panel gt Hardware and Sound gt Device Manager gt Display adapters and then Note clicking the symbol The screen images and terms may differ from actual product depending on the computer model and driver version gt For Intel graphics cards 1 Right click over the Desktop and select Graphics Properties Click Display Settings and click the Horizontal Vertical Ratio Option intel Graphics Media a Accelerator Driver g Digital for mobile Television Display Devices Color Quality Rotation l V Enable Rotation Display Settings Screen Resolution 1280 x 720 Dd f 0 Refresh Rate 60 Hertz 7 90 C C 270 Display Expansion ah Aspect Ratio Options J C 180 Color Correction Hot Keys ntel EE os aoe 3D Settings Scheme Options Video Settings 3 Fit the Desktop to the TV screen by sliding the Horizontal and Vertical Resize Bars and click OK Horizontal Vertical for mobile Aspect Ratio Options J Maximum J Resize Bars Maximum Intel Graphics Media p Accelerator Driver intel OK Cancel Listening to Sound on the HDMI TV You can configure the sound of the computer to be played through the HDMI TV You have to conf
61. DVD Suite gt CyberLink DVD Suite Alternatively double click the CyberLink DVD Suite icon on the Desktop CyberLink DVD Suite The User Registration screen appears Enter your 2 personal information including your last name first name and e mail address when connected to the Internet and click the Register Now button 3 The Cyberlink DVD Suite screen appears Movie Player patch 2 Dvo movi Se eee Watch wih PowerDVD Experience uf surpassed video and audio quality with technologies that deliver the smoothest biightest and most natural usuals combined with exc ptional multi channellaudio SAMSUNG Menu Functions Menu mam You can save frequently used menus Favorites so that you can use them quickly You can play a DVD title You can create an audio WMA CD or musie WMA DVD and rip an audio CD Video amp You can create a DVD title save Phot HDV DV video edit video and record aa a DVD folder Sopy S You can copy DVD CD data Backup Utility You can create a disk image save and delete an image and print a label For the detailed usage procedures for each of the functions refer to the help section of the corresponding program I Play Camera Optional Play Camera is a program that enables users to take still pictures or record videos using the camera installed on the computer Before You Start The program versions described in this manual are subject to ch
62. EE EE ESEEEETEOESETELESEEEDELEEEEDEEEEEDEEEEEEEEES You can view the drive structure and the currently opened window location You can move directly to a folder by clicking the folder in the Search window Used to resize the window P Minimizes the window 9 Window Button HE Maximizes the window ial Closes the window You can search for files by specifying the text included in the filename or within the file or file attributes POCO HOES EEE OHE EEE OE HOHE EEE SOHO TEES OSH EOSEHOEE EOS OSH EEE SOOO EOS OSHEE EH EEHOEE EOS OOHEEEOSSOEESESOSE EES OOH ESO OSE OEESESOSEEESOOHE ES OOEOEE SESH EE SEOHE ES OSEOEESESOSEEESEOH EES OSEOE ES ESOEEEESEOHEESOSEEEE SESH EE ESEOHTEESOOHEEESESOEEEEOOOEEE SOSH SHEESH EESEOHEESOSEEEEDESOES POC OOOO E OE EEHE TES ESOSOE EOE EEEE SEO ESOSOE EOE EEOE EET ESOSEE TOE SEHE TES ESOSEE EOE SEOH TES ESOOHEESOEHETSEESOTEEESESH EES OEHOT EE ESOTEE ESOS ET SOSHE TEE ESOTHE ESOT EESOSHE TE EESOTEE ESOS EESOEHETOOESOT SE ESESHEESOSHE ES OESOTE ESSE ESOTHETEOESOT EE ESETTEESESHETSOESOTEEESESTEESOSEESEOESEORS 9 Detailed Information Window Shows the general information of the selected file What is a drive A storage device on which files and folders are saved to and read from What is a folder A folder is used to systematically group and manage files and may include files in sub folders It is similar to a filing cabinet a What is a file A file is a document or various kinds of information generated as a resu
63. ESEEETELETESESELEEEEEHOEHET TEESE EHEEEEEOEEOEEEEEEEEEEEEEEEET EET EEEHEEEEEEEEEESEEEEESHEEEOO TEESE HE SEOEEEEEEETEEEDOEEEEETEOEEOEEEEEEEE TELE HE TELEEEEEEEESETESEEELESELELE OE EEEEEEEELOEHESELESELEDEDEEE ELLE EEE EL ELELELELEEEE ESE OEEELe woe Oe apy errr crit trier rrr tyr titer trem retreat terre r rrr ren tt feer rarer ee 11g mode OFDM 11b mode MAX 11Mbps Data Rate Mbps st iat cause Ease ens lng sabe do Nena date pac wala Laos E amish pant abcd dees esd Gaia eeepc ed AA A A E 11g mode MAX 54Mbps Antenna Type Built in Antenna The data rate may differ from the real data transmission rate 11g mode is supported only when you are connected to an IEEE 802 11g device e g An Access Point supporting IEEE 802 119 Registered Trademarks Samsung is a registered trademark of Samsung Co Ltd SENS is a registered trademark of Samsung Electronics Co Ltd Intel Pentium Celeron are registered trademarks of the Intel Corporation Microsoft MS DOS and Windows are registered trademarks of the Microsoft Corporation Memory Stick and oe are trademarks of the Sony Corporation All other product or company names mentioned herein are registered trademarks of their respective companies Macrovision Certification This product incorporates copyright protection technology that is protected by method claims of certain U S patents and other intellectual property rights owned by Macrovision Corporation a
64. ESH SESE SES OSES ESSE SESE DEES SEES OSES OES HOES SESE SEES SEEEE OSES EESE SEES OSE EE EES HEED OSES EE EEEDES EEE O EEE ES EES PPPOE E EEE ESE E EEO T ESTOS HELOEHETEHEEESESEET TEESE TEEEHEHEEEOHHTEEEEEHEETETHSH EES OSEEE OT EEEHT EE TETEHETE ESTOS HESESOEEEESEHH ET EEEESH ESTHET ESOEEEEHEEEEEHOEET TESTO HEEEOHEESESEEHOEEOEEHEEESOSEEE OE EEHTEEEEEHEEEESESEOTEEETEHHHETOSEHET TEETH EESEHEOE OH EEESEEEEEOEEEESESSEOES Temperature 5 40 C for storage 10 35 C when operating Humidity 5 90 for storage 20 80 when operating POCO E SOHO EEEESOHEEEHOHE SES OOHES HEHEHE OEEOSOSESOE EO OE EOE EH SEEEEEESHEEE SOT OSH SES OSEOSEEEEOESE ES EOHEO EOS EHOSEEESHSOE ES EEEHOS ESOS OHH EES OSEOS EE ESOEHEESHOHEO EO SEHOEEEEEOSOE ES HSSHOSESESOHT EES OSHOSEESEOSO EEE EOEESEOSESOTEEEEHSHEESOEEEESESESOHESESHSEOSEESHOS OEE ESORESELOESEES Output Voltage 19VDC Optional components may not be provided or different components may be provided depending on the computer model a The system specifications are subject to change without notice Caution The hard disk drive capacity of a computer in which Samsung Recovery Solution is installed is represented as smaller than the product specification Wireless LAN Specifications 802 11a b g 802 11n Card Intel 802 11ABG WLAN E The Name of the Registered Equipment Special Low Power Wireless Device for Wireless Data Communication Systems Item Detailed Specifications Dimensions 30 0 x 50 95mm
65. Example PC Card Eject Button If you insert a card into the slot Windows recognizes the card automatically or a message telling you to install a driver appears If the card is not automatically recognized install the device driver supplied with the card If a window asking whether you want to scan and change appears click on Continue Without Scan Note This will proceed to Step 2 above To remove a PC card 1 2 3 4 5 Double click the Safely Remove Hardware icon i on the taskbar Select the PC card to be removed and click Stop If the Stop a Hardware device window appears click the OK button Push the Eject button of the PC card slot lightly Then the Eject button pops up Press the Eject button fully to eject the card Connecting a monitor TV Using an external display device is useful when you are giving a presentation or watching a video or movie through your monitor Before You Start You have to buy a connection cable additionally Connecting a Monitor Connecting to the Monitor port Connect the monitor to the Monitor port Connecting to the HDMI port You can connect to the HDMI port of a monitor using an HDMI cable Connecting a TV Since the port to connect to a TV differs depending on the port type used to connect the TV connect as follows Connecting to the Monitor port Connect the monitor and computer using the PC Input RGB port on the TV with the monitor cable
66. File Edit View Tools Help Set up how Children will use the computer Current Settings On enforce current settings Children _ Standard user Activity Reporting Password protected On collect information about computer usage Off View activity reports indows Settings Web Restrictions Medium Windows Vista Web Filter TEND Control allowed websites downloads and other use ime Limits Time limits Game Ratings Off Control when Children uses the computer Program Limits Off Allow and block specific programs Allow and block any programs on your computer S Games Control games by rating content or title Si oh Using Activity Report You can view and evaluate your children s internet access through the Activity Report Open the User Controls window referring to the descriptions of Parental Controls 2 Set Activity Reporting to On lola jee g amp Parental Controls User Controls 44 Search pP File Edit View Tools Help Set up how Children will use the computer Parental Controls Current Settings On enforce current settings i Children 2 Standard user ing Password protected la View activity reports Windows Settings Windows Vista Web Filter Control allowed websites downloads and other use Web Restrictions Medium Time Limits Off Time limits Game Ratings Off J Control when Children uses the computer Program Limits Off Games Control game
67. Fingerprint Sensor Optional You can turn the computer on with your fingerprint or login to Windows For more information refer to the additionally supplied manual Only for models with the fingerprint identification system p 127 Status Indicators 123456 7 1 Num Lock This turns on when the Num Lock key is pressed and numeric keypad is activated E p 45 2 Caps Lock This turns on when the Caps Lock key is pressed allowing capital letters to be typed without holding the Shift button down 3 Scroll Lock This turns on when the Scroll Lock key is pressed and screen scroll is locked E p 45 4 HDD This turns on when the hard disk is being accessed 37 5 Wireless LAN This turns on when the wireless LAN is operating Charge Status This shows the power source and the battery charge status Green When the battery is fully charged or the battery is not installed Red When the battery is being charged Off When the computer is running on battery power without being connected to AC adapter Power This shows the computer operating status On When the computer is operating Blinks When the computer is in Sleep mode Right View 1 Modem Port Optional A port to which a telephone cable is connected to in order to dial up to the Internet To use the modem port open up the rubber cap on the port 2 CD Drive ODD Optional 3 USB Port Plays CD or DVD titles You can connect USB devices
68. HDD Password Frozen message appears when entering the BIOS Setup and then selecting Security gt HDD Password press the Power button to turn the computer on again Setting Up a Boot Password To setup a boot password the administrator password Set Supervisor Password should be set in advance Set the Password on boot item to Enabled Once a boot password is set you have to enter a password to boot up the computer Deactivating the Password 1 Press lt Enter gt on the password to be deactivated For example to deactivate a supervisor password in the Set Supervisor Password item press lt Enter gt In the Enter Current Password item enter the currently configured password and press lt Enter gt Leave the Enter New Password item field empty and press lt Enter gt Leave the Confirm New Password field empty and press lt Enter gt In the Setup Notice window press lt Enter gt 2 3 4 9 The password is deactivated Changing the Boot Priority The default boot priority of your computer is the CD ROM first then a removable device and then the hard disk drive in this order By default the highest boot priority device is set to the CD ROM DVD drive As an example the procedures to change the highest boot priority device to the hard disk drive are described below 1 Select the Boot menu in the BIOS Setup 3 Press the down key to move to the IDE HDD itemand press the F6 key to move up to the top
69. Note Custom Select this option to Reinstall Windows You Note have to reinstall all necessary device drivers and programs after the Custom installation In addition unnecessary folders and files may remain on the hard disk drives after the installation e g C Windows old etc Upgrade Select this option to Upgrade Windows while maintaining current files configurations and programs Although you therefore do not need to reinstall the device drivers and programs some programs may not work properly after the upgrade 5 When a window appears asking for the location to install the operating system to select a disk drive partition and click the Next button Drive D includes an area to save the backup image Ep used by Samsung Recovery Solution Installing Caution Windows to drive C is recommended When previous Windows installation files are in the selected partition a message appears informing you that the files and folders will be moved to the Note Windows old folder Click the OK button 6 The Windows installation continues The computer will restart 3 times during the installation If the Press any key to boot from CD or DVD message appears after a restart do not press any button The Windows user registration screen appears Select the username and photo and click the Next button F Enter the computer name The window in which you can select the Desktop background appears Enter the con
70. PM Trusted Platform Module program is a security solution which manages the user authentication information that protects the information and data of users This program protects files and folders from malicious access attempts by unauthorized users Q Before You Start The program versions described in this manual are subject to change and the screen images and terms in this manual may differ from actual ones TPM Settings Using the TPM Function gt Encrypt File System EFS Function AD For the TPM settings you have to complete the following Using EFS you can protect your files and folders by steps sequentially encrypting them gt Personal Secure Drive PSD Function 1 Initializing the Security Platform You can create a virtual secure drive so as to use The process for initializing the Security Platform files and folders safely gt Initializing and Reconfiguring the TPM Chip The procedures for initializing and reconfiguring the authentication information saved on the TPM chip 2 Registering a Security Platform User The process for registering a security platform user are described here For more detailed procedures on using the TPM program refer to program Help TOS Initializing the Security Platform You have to initialize the Security Platform after installing 3 Select Initialize a new Security Platform and click the TPM Host software The procedures for initializing the Security Platform are describ
71. SAMSUNG User Guide Chapter 1 Getting Started Product Features Before You Start Contents Safety Precautions Proper Posture During Computer Use Important Safety Information Replacement Parts and Accessories Regulatory Compliance Statements WEEE SYMBOL INFORMATION Overview Front View Status Indicators Right View Left View Back View Bottom View Turning the Computer On and Off Turning the computer on Turning the computer off N O W N 18 21 23 25 35 36 36 37 38 39 40 41 42 42 42 Product Features High Performance Notebook Computer Intel Core 2 Duo Celeron Processor DDR III Memory Wireless LAN Optional Bluetooth Optional Intel Turbo Memory Optional Fingerprint recognition Optional TPM Trusted Platform Module Optional Easy to Use AV Camera Module Installed Optional Sophisticated Design for Increased Usability m Various shortcut keys on the keyboard Multi card slot m Luxurious design with increased usability Optional items may be changed or may not be provided depending on the computer model Note Before You Start Before reading the User Guide first check the following information User Guide Information This product is supplied with an Installation Guide and a User Guide You can even more easily and conveniently use the computer by using any of the guides depending on your needs Installation Guide This guide is provided so th
72. SH EEOEEOEHOE SE OSO OTE SHOOT OEEEOE EE ESOES EO TOOEESOOHE EO OEOOE ES ESOET SO ESOOE ES OSOESTEEEEOSOOEEOE SOOTHES HOHE SO SEOSOSESOE SOOTHE SHO OE EE OOESTOSESOT ES ESOO TEE HOOS ES OOE ESO OESOTTEESOOTEEHOOESSHSOSTE EES EOESOOEESOS ESET ESSE ESET SESE ESEOEESEOEE Sets the computer to enter Sleep mode The screen and hard disk will be turned off to reduce the power consumption of Sleep the overall system If you press the Power button on the computer Sleep mode is deactivated and you can start working immediately Sets the computer to hibernate All work is automatically saved the screen is turned off and the computer makes Hibernate no noise If you press the Power button of the computer main body the work environment is restored and you can start working immediately Shut down the computer _ Shut down You have to shut down the computer after closing all programs and opened folders The Power button is set to Sleep mode by default Ifthe computer is set to download Windows updates automatically the update mark call is displayed on the Power Note button when an update is ready If you click this button the update is installed and the computer is shut down when the update installation is complete Phishing Filter Phishing is a method used by hackers to illegally collect personal information such as credit card numbers passwords other account numbers etc through emails or websites The Phishing Fil
73. SS SESE OSES SESS ESOOSTEH OSSD OSES OST OSSSETOS OSES OSES SEES OSES OSES SEES O SEEDS SOTO SOOO SESS EES ESTOS SES ESSE EEE OSOES OSES ESE S SESE SESE SESE EES OSES ESET OSSD OSES EOESO SEDO ESET ESOS OSTEO OSES SESE SEES O SED EEES eee eee eee ECE CeCe eC eee Eee eee eee eee ee eee eee eRe eee eU ECC E SE OEE e Eee reer e rere errr ere reer errr er errr rer ere rere rrer er errr rer er ere reer er err reer er ere reer errr errr rer er eer rr er ere rere er ere rere er er errr rrr er er err reer errr err er er errr rer er ere rer rrr er ere reer errr rrr rr ere reer errr eseccoccoccoccoccoccoccoccosoocoococecoccoeccoccccccccoceccecscosocseccccccosecccosooscococeccccceccecceceececcecceccecsocsocsoeccocsccccccoccoceoceoceccoccocccccoecccoccccccecceccoscoscoccoscoccoccoceoseoseose secsosoooseosocososoosocosoosoosoososocossocoosocosoosocsocococososoosoososocooososoosossosososoosoosocosooocossosoosoosocssoosossocoosocosoosocoosoooooosoososoosooosoosoosossoossoccosoosoosococosoosoosoooooosooo cecscccoooococoococosocoosoosocococecocoocoocoocoosoocoocoosocooosoosococosoosoosooscooooocooooosoocoosoosocsoosocososococossoocosoocoosoosoosoosoosooosossosoosooscosoosococooscoocoosoosoosoosooooosocoooocsosooccossococcoosoosoosoosoocoosooocosoosococooooocoocoocoosoosooo sescoosocoseosoosocoosocosoosocsosoosocoosocoooococsosoosococococosoococsococosoosoosocsosoooocosoosocoosocooocococoocoocosoosocoesocoosocoosossococoocosoososoocoooscosoososoosococcococcosoososocooooooocoooosooo I a
74. V Volume Control W Wired Network Wireless Network Windows Vista 119 164 44 of 47 85 65 96 99 71 BN4xx_P
75. Width X Height Physical Operating Same as System Operations Specifications Temperature And 3 POeeeeeee rere reer rrrrrrrrrerrrrrrrerrer rrr rere rere reer rrrrrrerrrr rr rrrrr rrr errr reer errr rrr rrr rr rrrrr rrr rrr rr errrrr rrr er errr rrr rrr ree reer rrr rere ree ere ere rere eee eee ee ee ee ee Humidity Temperature Bet 0 C and 70 C Humidity Less than 85 pewer Power 3 3V Specifications Compatibility IEEE 802 11a IEEE 802 11b IEEE 802 11g Operating System Microsoft Windows XP Vista Network l Media Access Protocol n Specifications MAC CSMA CA Collision Avoidance with Acknowledgement ACK CO COSSHOEHHO SESE EEE OEEOE HESS EEE EEHOSOHES EEO EEEOEHEOOESSOO OE ETOSESESOHEESOOHESSOEHOSOSEHE EE EOOETEESOSEESOSOES SHEET OEEHO OE EEOSEOESOHE EE HOOEE SOSH EOSEHS EE EOOSSEEEOHTEEESHEESHSEOS ESHEETS EESOSE ESTEE OESOOEEE ESET HOES OEESEOEEESESE Security _ Wired Equivalent Privacy support WEP 64bit 128bit WPA This device supports the Wireless LAN Security Specifications WPA Wi Fi Protected Access for Wi Fi To connect to a WPA wireless network you have to configure the settings according to the network connection environment For detailed setting information ask your network administrator E Radio Specifications RF Band 2 4GHz 5GHz Supported Channels Channels allowed per country Device Transceiver POPC Oo Oooo O OOOO OEE EEO EOE SOE EESOESE SOOO EEE ESET OSS SS SESS OEOD OSE D ESSE SSS O OSES SE
76. a The screen layout may differ depending on the computer model and the operating system Note Welcome Center In the Welcome Center you can view brief descriptions of Windows Vista functions and run the functions directly 1 Click Start gt Welcome Center 2 If you click on an item information on the function is displayed in the description window For example if you click View computer details your computer information is displayed in the description window In addition click on Show More details for more detailed information Windows Vista Home Premium Intel R Pentium R 4 CPU 3 00GHz 1 00 GB RAM PIS ale i pale came AEE 2 NVIDIA GeForce 6200 TurboCache TM Microsoft Corporation WDDM Descri ption Window Computer Name SAMSUNG PC 1 Get started with Windows 14 A View computer details i s 1 kz Windows Anytime Upgrade e Connect to the Internet Q What s new in Windows Vista Show all 14 items Windows Vista Demo If you click Start gt Welcome Center gt Show all x items gt Windows Vista Demo you can watch the Windows Vista Note introduction movie Help and Support Windows Help and Support provides information on Windows basic functions and usages Click Start gt Help and Support You can find help for frequently used basic functions using Find an Answer and you can search for help by entering a keyword in the Search box Windows Help and Support EP a fin
77. a Ra a a Ra a a POPP eee EEE EEE EEE ESE EEE EEEEEEEE EE SEDO EE HEHOEE HEHEHE EEOEEE THE EHEEEEESEEH OES OEEOH HEHEHE EE OSOHE HES OSEEEEEEOEE EEE SEEETESHEEHO EE EOEOEHESHOEHETHOEEE TEE OEEET EE SOHEOESEEEOEEEHOOHEHESOSEEEEEEEEEE HEHEHE SHEETS EEEHEE EE SHOES HEESETHEEHEEE SOLE EEEESOLEESEEELELELESOEEEEED Antenna Type Built in Antenna The data rate may differ from the real data transmission rate 11a mode is only supported when the device is connected to an IEEE 802 11a device e g Access Point supporting IEEE 802 11a 11g mode is only supported when the device is connected to an IEEE 802 11g device e g Access Point supporting IEEE 802 11g Intel 802 11AGN WLAN E The Name of the Registered Equipment Special Low Power Wireless Device for Wireless Data Communication Systems Item Detailed Specifications Dimensions 30 0 x 50 95mm Width X Height Physical Operating Specifications Temperature And Temperature Between 0 C and 70 C Maximum Humidity 85 Humidity power Power 3 3V Specifications Compatibility IEEE 802 11a IEEE 802 11b IEEE 802 11g IEEE 802 11n Network a S E ara a A A A Specifications Media Access Protocol MAC eccocoscocococooocoooocooooooooocecococoooooocoocooooooocoooooocoocooooocoooooooccocooocooosoocooocococoooooocooooooooooooocoooooooooocooooooocoooococooooocoococoocoocoooooooooooooococoocoococoocoocoooooooocooooocooooooooooooo Security Wired Equivalent Pri
78. ace m The product should be operated only with the type of power source indicated on the rating label m Ensure that the electrical outlet you are using to power your equipment is easily accessible in case of fire or short circuit m f your computer has a voltage selector switch make sure that the switch is in the proper position for your area 21 Care During Use Do not walk on the power cord or allow anything to rest on it m Do not spill anything on the system The best way to avoid spills is to not eat or drink near your system m Some products have a replaceable CMOS battery on the system board There is a danger of explosion if the CMOS battery is replaced incorrectly Replace the battery with the same or equivalent type recommended by the manufacturer Dispose of batteries according to the manufacturers instructions If the CMOS battery requires replacement insure that a qualified technician performs the task m When the computer is turned off a small amount of electrical current still flows through the computer To avoid electrical shock always unplug all power cables remove the battery and modem cables from the wall outlets before cleaning the system m Unplug the system from the wall outlet and refer servicing to qualified personnel if The power cord or plug is damaged Liquid has been spilled into the system The system does not operate properly when the operating instructions are followed
79. administrator E Radio Specifications RF Band 2 4GHz Supported Channels Channels allowed per country Device Transceiver POP SO EOS EE HOOT ELEEEEE ETO EEE OSESEEEE STEHT TE SEOHHEEESOSHESHOEEE EES EEETEH SEES ES EHETOSE ESTOS TS OOSH ETT OTEOTT OTOH EH EOHOEHT TEESE ESOS OEEETOOEEE EOE HEETETOEETEETESHTOSEESOOSTESOESOEETOSHOTT OTHE E THEO OOE HT ETEHHHSHOHEHEHEOHEEETOTESETESHOEHEHESESTESEEESOSEESEESEEETOREEEED POPP ee ee eeeeeeeeEeEseEEE DELETES EEEEEEEEESESEHETEEETESEEEEEEEOEHOEEEH TEESE HELE EEESEOEEOEEEEEEEEEEEEETEESOEEHEEEEEEEEEEEEEELESHEEEE OE EOTEEHESEOEHET TEETH E TOTO OSE OEEEETEEEOEEEETEEE HOTEL EEESEHEEEETEEELESELELE OE LELESELELEEHESEELEELEDELEEE ELLE EEE EE EELELEEELEEEEEDEOEEEEe holo Oe apy EE ee Cor err cr errr treet Terr Tere terrier tere rer rr errr ere 11g mode OFDM 11b mode MAX 11Mbps Data Rate Mbps EN EAE REEE tae EEEE SE VEEE Same ned PE EE ase nce pcs sb es engage he ec acces nt ee EEEL S nw aceite sense vale he wen AAE E TA uence AE ETELA AEE ERRES EET 11g mode MAX 54Mbps Antenna Type Built in Antenna The data rate may differ from the real data transmission rate 11g mode is only supported when the device is connected to an IEEE 802 11g device e g Access Point supporting IEEE 802 119 Atheros 802 11BG WLAN m The Name of the Registered Equipment Special Low Power Wireless Device for Wireless Data Communication Systems Item Detailed Specifications Dimensions 30 0 x 50
80. adset you have to check if the headset is connected as a stereo headset To resolve the problem complete the procedures below Double click the Bluetooth icon on the Taskbar Note select the Audio tab and check the connection status of the Bluetooth Stereo Audio that corresponds to the corresponding headset in the connected device list If it is not connected right click over the device and select Connect from the pop up menu Right click over the Speaker icon on the Taskbar select Playback Devices and make sure that the Bluetooth Hands free Audio is enabled If not right click over Bluetooth Hands free Audio and select Set as Default Device After changing the Bluetooth or sound settings you must exit and re run the audio video player program such as Windows Media Player to apply the changed settings Blu Ray Optional Is it compatible with the existing CD DVD formats A All Burning Playback and Authoring functions are supported for the CD DVD formats Qa play an HD DVD title A Since HD DVD and Blu Ray disk are different HD DVD titles are not supported Which functions for the Blu ray disk are supported A All Burning Playback and Authoring functions are supported for Blu ray disks The supported functions for each Blu ray disc drive may differ depending on the computer model Can burn a Blu Ray disk using a general CD RW or DVD RW drive A Ageneral CD RW or DVD RW drive does n
81. anage Network Connections in the left pane 2 Right click over the Local Area Connection and select Properties 2 Select Internet Protocol Version 4 TCP IPv4 from the Networking tab and select Properties Select the Alternate Configuration tab select User configured and fill in the corresponding fields Internet Protocol Version 4 TCP IPv4 Properties Alternate Configuration If this computer is used on more than one network enter the alternate IP settings below Automatic private IP address User configured IP address Subnet mask Default gateway Preferred DNS server Alternate DNS server Preferred WINS server Alternate WINS server When you have completed the settings click the OK button Wireless Network A wireless network Wireless LAN environment is a network environment that enables communicating between multiple computers at home or a small size office through wireless LAN devices Before You Start a The descriptions below are for computer models with a Wireless LAN card or device You can also configure the wireless network settings using the Easy Network Manager E p 101 A Wireless LAN device is optional To view the installed wireless LAN card click Start gt Control Panel gt Hardware and Sound gt Device Manager gt Network Adapter and click the symbol Some pictures may differ from actual product depending on your wireless LAN device model To use the
82. and restoring the system The system diagnosis function enables users to diagnose system problems without assistance from others I CyberLink DVD Suite Optional The CyberLink DVD Suite provides you with multimedia functions such as playing a DVD burning a DVD CD etc Before You Start For some models only the DVD Movie Player function is installed from among the functions of the CyberLink DVD Suite To use other functions such as recording data burning a disk please install the additional software on the system software media or additional CD ROM m The CyberLink DVD Suite program is optional and may not be provided for some models m The screen display may differ depending on the program version and inserted disk type Note Playing a DVD Then click the Play icon in the control panel of CyberLink PowerDVD to play the DVD title 1 Insert a DVD title into the DVD drive ane Select PowerDVD and click the OK button Y v7 After a moment the DVD title will play f PowerDVD The No 1 DVD Experience on the PC i AutoPlay gt DVD RW Drive E S FELLOWSHIP_EXT_D1 Always do this for DVD movies DVD movie options o Play DVD movie using Windows Media Player Play DVD movie using Windows Media Center F Copy Disc or Play Movie Pa n el Undock Player If you click the Undock Player Panel button the program control panel transforms as follows General options J Open folder t
83. ange and the screen images and terms in this manual may differ from actual product For more information on how to use the program refer to the online help Do not take pictures or record video of someone without their permission Do not take pictures or record video in locations where photography is prohibited Note Do not take pictures or record video in locations where you could violate another person s privacy Click Start gt All Programs gt Samsung gt Play Camera gt Play Camera If you right click over the Preview window using the Touchpad you can set up the camera resolution Note device and save folder Window Control Preview Window and Exit Buttons 2 Place an object in front of the camera over the LCD and click the Snapshot lt i or Start Recording button A still picture is taken or video starts recording Play Camera To stop a video recording click the Stop Recording _ button The recording is stopped Note TI button you 3 If you click the Open Save Folder can view your stored pictures and videos You can view a picture by double clicking it E G Since you cannot watch recorded videos using the I Play Camera use a video playing program such as Open Folder Help Windows Media Player Cyberlink Power DVD etc to watch videos Rec Snapshot I Samsung Update Plus Optional Samsung Update Plus is software that examines and updates the Samsung software
84. ange this password later Password Confirm Password 134 6 Select the Security Platform features to use and click the Next button Automatic Backup The Security Platform authentication and settings are saved in the backup file Password Reset Allows a user password to be reset amp Infineon Security Platform Initialization Wizard Features Choose Security Platform Features Select the Security Platform Features you want to configure and click Next to continue For details on Security Platform Features click Help Security Platform Features Configuring Automatic Backup is strongly recommended Otherwise encrypted user data could be lost in case of an emergency Click the Browse button and specify the backup location for Automatic Backup and click the Next button Infineon Security Platform Initialization Wizard Backup Set up automatic backups Automatic scheduled backups will save Security Platform credentials and settings to a Backup Archive Backup location lt By default the backup will be scheduled to run automatically at 12 PM every day Schedule Click Schedule to view and modify the backup scheduling _ You will have an opportunity to run backup immediately on the completion of this wizard l The screen below appears when you have selected Automatic Backup in Step 4 Click the Browse button and speci
85. anguage and Region Change keyboards or other input methods Change display language Set up file sharing Ease of Access Let Windows suggest settings Optimize visual display Hardware and Sound Play CDs or other media automatically Printer ne Additional Options Programs Uninstall a program Change startup programs Mobile PC Change battery settings Adjust commonly used mobility settings Recent Tasks py Add or remove user accounts Customize colors User Accounts and You can change the user account settings passwords and configure the Parental Family Safety Controls function Appearance and Using this function you can configure the Desktop style theme or screen saver Personalize settings Clock Language and Region Using this function you can select options for hearing and sight impaired persons as well as for challenged persons You can configure the audio recognition settings POPP ORES SELES EEE EEE H ESET EE SEEOE HEE EEEEOHEEEEEEH SEE EEE TEESE EEE SHOE EEEOEE EE SOT OEE EEEEEEEEEEEOEEOE TEE EEE EE EEEE EE SEEE EE OEEEEEOEEEE EE EEEE EE EEEEEEEEEEE HELE EEEEEH ETO SEEEEEEEE OE SOHEE RETEST ES OTERO E ESE EDESEEESELOERELESELELELEELEHEEEELEEEEEELELEEESESEEEELEEEE EEO E LEED Additional Options Using this function you can configure other Control Panel item settings Using Windows Vista User Accounts more than one user can easily share the same PC The procedures to add and delete a user account a
86. ards such as Serial and PS 2 While USB 1 1 supports 12Mbps 12 million bits per second USB 2 0 supports a data rate that is 40 times 480Mpbs faster than that of USB 1 1 The data rate of USB 2 0 is equivalent to that of IEEE1394 Therefore USB 2 0 is used for A V devices supported by IEEE 1394 and a 2nd HDD and CDRW that require a high data rate Windows Media Player A multimedia program included with Windows Using this program you can play a media file create an audio CD listen to a radio broadcast search and manage media files and copy files to a portable device etc Index B Battery Battery Calibration BIOS Setup Bluetooth Booting Priority C CD Drive Recording Charge Click Connecting AP AP Connect Output Monitor Control Panel CyberLink DVD Suite D Dual View Desktop Change E Easy Battery Manager Easy Network Manager H Help 159 163 150 106 156 50 160 48 99 58 83 115 63 Yo 161 101 12 L LCD Brightness Memory Modem Connection Multi Card Slot Multimedia N Network Network Status Diagnosis P Password Product Name Product Specifications Program R Recorder Remaining Battery Charge Resolution Color 148 157 105 54 113 101 104 154 36 211 112 65 160 87 S Samsung Update Plus Security Lock Port Safety Precautions Shortcut Keys Status Indicators T Touchpad U User Accounts Switch User
87. are only qualified for use in the countries identified by the Radio Approval Marks on the system rating label If the country you will be using the wireless device in is not listed please contact your local Radio Approval agency for requirements Wireless devices are closely regulated and use may not be allowed The RF field strength of the wireless device or devices that may be embedded in your notebook are well below all international RF exposure limits as known at this time Because the wireless devices which may be embedded into your notebook emit less energy than is allowed in radio frequency safety standards and recommendations manufacturer believes these devices are safe for use Regardless of the power levels care should be taken to minimize human contact during normal operation As a general guideline a separation of 20 cm 8 inches between the wireless device and the body for use of a wireless device near the body this does not include extremities is typical This device should be used more than 20 cm 8 inches from the body when wireless devices are on and transmitting This Statement is not applicable to UMPC Ultra Mobile PC such as PDA Portable PC This transmitter must not be collocated or operate in conjunction with any other antenna or transmitter except the installed Bluetooth transmitter Some circumstances require restrictions on wireless devices Examples of common restrictions are on the following page 25 C
88. art the System message appears after the restoration is complete click OK to restart the system Make sure that the power cord is connected while the EB restoration is in process The first time the computer boots up after a Complete Restore has been performed the speed of the boot process may be slowed down due to the system optimization process At this time do not shut the computer down by force User Complete Backup Restore A Complete Backup saves the complete image of the C drive onto another drive or DVD A Complete Restore restores the image file saved by the Complete Backup onto the C drive This guide describes the Complete Backup and Complete Restore procedures on the basis of backing up and restoring by using DVD Complete Backup Q If you run Complete Backup using a DVD you can restore the computer even when a problem occurs with the hard disk or when the restoration area is removed Click Start gt All Programs gt Samsung gt Samsung Recovery Solution gt Samsung Recovery Solution When you cannot start Windows turn the computer on and press the F4 key in the boot screen to enter restoration mode 2 When the initial menu screen appears click Backup 3 Click Complete Backup in the backup menu Enter a description for the backup regarding the Complete Restore current computer status in the Description field so that you can easily recognize it later and specify the 1 When bac
89. at you can conveniently refer to this guide when using the computer for the first time after purchasing it This document includes the computer components and the connection procedures 2 User Guide You are currently reading the User Guide To open the file at any time double click the icon on the Desktop Alternatively select Start gt All Programs gt Samsung gt User Guide gt User Guide This document includes the computer functions how to use the functions and how to use the programs Utilizing the User Guide Be sure to read the Safety Precautions before using the computer Refer to the separately supplied Installation Guide when installing your computer Refer to the User Guide for the procedures to use the computer Using the Index of the User Guide you can easily find any information you are looking for Using the Glossary of the User Guide you can easily find meanings for technical terms O ifa problem occurs refer to the Q amp A included in the User Guide zi Note Optional items some devices and software referred to in the User Guide may not be provided and or changed by upgrade Note that the computer environment referred in the User Guide may not be the same as your own environment Images used in this User Guide may differ from actual product This guide decribes procedures for using both the mouse and the touchpad The illustrations provided in this guide ass
90. ata Restore begins When Data Restore is completed check if the data has been restored to the specified folder T Q amp A This section provides information on possible problems solutions and other references for using the system Display Related Q When I connect a projector and change the The LCD screen is too dark or too bright settings to display the screen image on both the T LCD and the projector by pressing the Fn a the screen is not displayed properly A Turn the LCD backlight on or adjust the LCD brightness Press Fn F to turn the LCD backlight on or press Fn t or Fn to adjust the LCD brightness A Press the Fn ta10 keys again If the problem continues even after pressing the key combination this is because the current resolution is too high and is not supported by the projector In this case change the resolution to 1024x768 pixels Q s screensaver is activated while Media Player is playing a movie or video clip When I connect a projector the taskbar at the bottom of the screen is not displayed on the rojector A Unselect Library gt More Options gt Player gt Allow screen saver during playback in the Media Player A This occurs because a WXGA LCD supports a resolution of 1280x800 pixels but the resolution is Q the following cases the screen blinks or there not supported by the projector In this case change is noise for a short time the resolution
91. atest information The procedures to inspect and heal viruses after the user registration will be described below User Registration The Program Setup screen appears while booting 1 Click Next If the Program Setup screen does not appear right click over the McAfee icon in the Taskbar and then select Product Setup from the pop up menu Open SecurityCenter Updates Scan Quick Links Change Settings Verify Subscription Customer Support The End User License Agreement appears Check if the country has been correctly selected and then click Accept The Create New McAfee Account item appears Be sure to fill in all the fields and click Next The Program Setup Completed window appears 3 If you have already registered with McAfee click Login and enter the registered email address and password to login The Program Setup Completed window appears AN McAfee SecurityCenter Current McAfee User If you already have a McAfee account please log in Create New McAfee Account First Name Last Name E mail Address Re enter E mail Address Password Re enter Password Inspecting and Healing Viruses The procedures to check if the computer s files or information have been infected by a virus and to heal viruses found by McAfee are described below Click Start gt All Programs gt McAfee gt McAfeeSecurityCenter Click the Scan button on the left side of the program The
92. ating system name may differ depending on the Windows version Set AutoPlay defaults in Control Panel N ote gt 3 2 If the Select Windows Installation window 4 If the User Agreement screen appears select appears for Windows Vista SP1 accept the license terms and then click Next click Install Now When the Select Update l window appears click on the relevant item gt For Windows Vista SP1 the following window appears In this case select an o ea installation option If you click Custom Steps 5 to 12 are continued x sequentially If you click Upgrade Step 6 begins After that proceed to Step 11 Windows Vista Check compatibility online gt oree Which type of installation do you want Install now gt Upgrade Keep your files settings and programs and upgrade Windows Besure to back up your files before upgrading What to know before installing Windows Transfer files and settings from another computer Copyright 2007 Microsoft Corporation All rights reserved Custom advanced Install a clean copy of Windows select where you want to install it or make changes to disks and partitions This option does not keep your files settings and programs If you select Go online to get the latest updates Help me decide for installation in the Select Update window the latest updates are installed and Step 4 follows At this time the computer must be connected to the Internet
93. ation sensor again and push it down slowly until the fingerprint is displayed in green 130 Encrypting Decrypting Files To decrypt encrypted folders and files K The procedures are the same as those for the encryption process except for selecting Decrypt instead of Encrypt in the figure above You can encrypt folders and files so that only specified users can open or modify them The procedures to encrypt files are described below This function is applied to some models only When the file encryption authentication window appears select AuthenTec Fingerprint Driver place your finger over the fingerprint identification sensor and push it down slowly Alternatively select 1 Select Start ED gt All Programs gt Softex gt Integrated Password Authentication and enter the OmniPass Control Center gt Protect Your Files login password If your fingerprint is not recognized the fingerprint is displayed in red in the fingerprint display window In this case place your finger over the fingerprint identification sensor again and push it down slowly until the fingerprint is displayed in green Select a folder or file to be encrypted and click Encrypt Action ET 4 If the fingerprint is recognized the following window appears Click OK to encrypt the file Password Wizard Desktop Information E samsung E Control Panel Eda Public 5 Recycle Bin 7M Computer fl Adobe Reader 7 0 Ha Network Pak Dialke
94. aution Radio frequency wireless communication can interfere with equipment on commercial aircraft Current aviation regulations require wireless devices to be turned off while traveling in an airplane 802 11B also known as wireless Ethernet or Wifi and Bluetooth communication devices are examples of devices that provide wireless communication In environments where the risk of interference to other devices or services is harmful or perceived as harmful the option to use a wireless device may be restricted or eliminated Airports Hospitals and Oxygen or flammable gas laden atmospheres are limited examples where use of wireless devices may be restricted or eliminated When in environments where you are uncertain of the sanction to use wireless devices ask the applicable authority for authorization prior to use or turning on the wireless device Every country has different restrictions on the use of wireless devices Since your system is equipped with a wireless device when traveling between countries with your system check with the local Radio Approval authorities prior to any move or trip for any restrictions on the use of a wireless device in the destination country If your system came equipped with an internal embedded wireless device do not operate the wireless device unless all covers and shields are in place and the system is fully assembled Wireless devices are not user serviceable Do not modify them in any way Modification to a wi
95. available when the available afterwards Once you have completed the partitions you cannot resize the partitions Therefore partition the disk carefully The Initial Status Backup is performed to backup the initial status of the C drive to a secure location This backup image is used for the Complete Restore function that restores your computer to the initial status when the computer is not working properly When the Initial Status Backup is complete restart Windows Quick Restore Quick Restore enables you to easily restore your computer to a previous normal state when a problem occurs with your computer Quick Restore provides Basic Restore and Complete Restore Computer Initial Status Restore options 1 When Windows is running Click Start gt All Programs gt Samsung gt Samsung Recovery Solution gt Samsung Recovery Solution When Windows does not start Turn the computer on and press the F4 key when the boot screen SAMSUNG logo appears After a moment the computer boots up in Restoration mode and the Samsung Recovery Solution screen appears The touch screen function is not supported in this mode even if your model supports a touch screen In this mode please use the touchpad or mouse instead of the touch screen 2 If the Samsung Recovery Solution program is launched for the first time after purchasing the computer the license agreement screen appears before the restoration is started
96. ble connection Using Bluetooth you can exchange files connect to the Internet and construct a private network as well as communicate with a keyboard mouse printer etc without a cable connection Before You Start a The Bluetooth supporting function is only available between devices a computer cell phone PDA printer etc and the connection may be restricted according to the profile of the corresponding device a The Bluetooth function is optional and may not be supported depending on your model a Compatibility to devices without the authentication or logo of Bluetooth is not guaranteed Bluetooth Function You can exchange files between two Bluetooth devices You can exchange files with another Bluetooth device such as another computer cell PARESE EAE ESS EEEE EEEE phone PDA ete You can connect to another Bluetooth installed computer in the same way as an Ad Hoc Network Access ase mode in wireless LAN and connect to the network via an AP or an Internet connection sharing server File Transmission secosococococooosooooooocoocosooosooooooocooosooosooocosoooooooooooooosoocooooooosoooooooosooooosocoosoooooooooooooooosoocooooooooooosoooosoosoooooooooooooooosoocoooooosooooooococooocosoocooooocooooooocsoooooocosooooooocoosoooooooosoooooooocoosooooooooooooooooooooooooooooo Network Access through a Phone 2 You can connect to the network via a Bluetooth cell phone Connection O cssnsnennnnuntnnanannannnannnnniannuanuanans
97. case connect the AC adapter or turn off the computer and install a fully charged battery If the battery residual amount is 3 5 the computer automatically shuts down after saving the data The battery residual amount may vary depending on the computer model Battery Usage Time Information A battery is an expendable supply so when using it over a long time the capacity battery life is shortened If the battery life is reduced to under half of its initial time we recommend purchasing a new battery For long periods of not using the battery keep the battery after discharging it This extends the battery life time Extending the Battery Usage Time Decreasing the LCD Brightness Press the Fn keys on the keyboard to decrease the LCD brightness to extend the battery usage time Using Easy Battery Manager Optional Easy Battery Manager is a power management program that enables using the battery power efficiently You can select an optimized power mode according to your requirements Easy Battery Manager is optional and may not be surpported depending on your model Note Click Start gt Control Panel gt Hardware and Sound gt Power Options Alternatively right click the power measuring device icon i in the notification area of the taskbar and select Power Options 2 If the following screen appears select one of the modes Require a password on wakeup Select a power plan Choose w
98. ce that temporary discontinuance of service may be required But if advance notice is not practical the telephone company will notify the customer as soon as possible Also you will be advised of your right to file a complaint with the FCC if you believe it is necessary The telephone company may make changes in its facilities equipment operations or procedures that could affect the operation of the equipment If this happens the telephone company will provide advanced notice in order for you to make necessary modifications to maintain uninterrupted service If trouble is experienced with this equipment Modem for repair or warranty information please contact your local distributor If the equipment is causing harm to the telephone network the telephone company may request that you disconnect the equipment until the problem is resolved The user must use the accessories and cables supplied by the manufacturer to get optimum performance from the product No repairs may be done by the customer PAS This equipment cannot be used on public coin phone service provided by the telephone company Connection to party line service is subject to state tariffs The Telephone Consumer Protection Act of 1991 makes it unlawful for any person to use a computer or other electronic device including fax machines to send any message unless such message clearly contains in a margin at the top or bottom of each transmitted page or on the fi
99. ched Telephone Network PSTN However due to differences between the individual PSTNs provided in different countries the approval does not of itself give an unconditional assurance of successful operation on every PSTN termination point In the event of problems you should contact manufacturer Technical Support I WEEE SYMBOL INFORMATION Correct Disposal of This Product Waste Electrical amp Electronic Equipment Applicable in the European Union and other European countries with separate collection systems This marking shown on the product or its literature indicates that it should not be disposed with other household wastes at the end of its working life To prevent possible harm to the environment or human health from uncontrolled waste disposal please separate this from other types of wastes and recycle it responsibly to promote the sustainable reuse of material resources Household users should contact either the retailer where they purchased this product or their local government office for details of where and how they can take this item for environmentally safe recycling Business users should contact their supplier and check the terms and conditions of the purchase contract This product should not be mixed with other commercial wastes for disposal USA ONLY This Perchlorate warning applies only to primary CR Maganese Dioxide Lithium coin cells in the product sold or distributed ONLY in California USA
100. ct X An application interface developed to enable Windows application programs to access hardware devices at a very high speed Since the operating speed of graphics memory and sound cards must be very fast to provide high quality video and sound for games Direct X enables faster control and interaction between applications and hardware devices By using Direct X the multimedia performance of Windows has been hugely improved Driver Software that interacts between the hardware and the operating system An operating system knows the hardware information and controls the hardware In general a driver is supplied with the corresponding hardware device DVD Digital Versatile Disk DVD was developed to replace CD compact disk Although the shape and size of the disc are the same as that of a CD the capacity of a DVD is at least 4 7GB while the capacity of a CD is 600MB DVD video is digital unlike VHS analog video and supports MPEG2 compression and digital audio To play a DVD a DVD drive is required Firewall A security system used to protect an internal network or intranet from external networks through an authentication procedure Hibernation Mode A power mode that saves all data in memory to the hard disk and turns the CPU and hard disk off When canceling Hibernation Mode all application programs that were running are restored to their last state Icon This refers to a small image that represents a fil
101. ct a saved playlist and click Delete Then the selected playlist is deleted Before You Start The TV function is only available when a TV tuner card is installed on your computer TV Movies Menus Live TV You can watch live TV programs Recorded TV You can watch recorded TV programs Guide TV Broadcast Program i recorded tv Guide EPG fata You can view the TV program guide You can watch or record live TV programs and reserve a recording Play DVD The DVD title appears play dvd Search You can search for a program by the title keyword or genre What is a TV Program Guide EPG An Electronic Program Guide EPG is a TV program Note guide You can select a program and view detailed information on that program or easily reserve a recording The guide information is updated by Media Center more than once a day Watching TV 1 Launch Media Center and select TV Movies 2 Select Live TV or Guide from the menu Note Note When Live TV is selected A TV program is played immediately Switch to the channel you want to start watching it When Guide is selected When the Guide List is displayed select a program currently being broadcast The program on the selected channel is displayed Programs that are being broadcast are represented in white and programs that have been broadcast or will be broadcast are represented in blue Switching channels Select a channe
102. d adjust the volume by sliding the volume bar The function is only supported for a computer s built in speakers and headphones For product improvement or changes to functions the screen image is subject to change without prior notice Intel Turbo Memory Device Optional Intel Turbo Memory is a device that enhances program execution speed minimizes power consumption and reduces the booting time by optimizing the hard disk drive access To use the Intel Turbo Memory device perform the setup as follows Note Select Start 9 gt All Programs gt Intel Turbo Memory gt Intel Turbo Memory Console The Intel Turbo Memory console program optional Note is only provided for models with Intel Turbo Memory Select the Information tab and check if both 2 Windows ReadyBoost Optional and Windows ReadyDrive Optional in the Arguments fields are set to Available If they are not set to Available select the Select a cache policy to use option If the Restart the computer message appears select Yes and then the computer restarts Select Start 9 gt All Programs gt Intel Turbo 3 Memory gt Intel Turbo Memory Console and check if Windows ReadyBoost and Windows ReadyDrive on the right are displayed as Normal Operation You can only use the Intel Turbo Memory device with Windows Vista This function is only supported for a specific model What is ReadyBoost A new Windows Vista technology that e
103. d play the CD 2 Select Copy CD at the bottom left of the Music Player window Copy CD Shuffle Repeat When running the Rip CD function for the first time the Ripping Options appear Configure the ripping options according to the instructions on the screen and complete the following procedures From the second time the program is run the setup options are omitted Note 4 If the Rip CD window appears click Yes Ripping a CD begins by showing rotating CD icon 5 on the right side that indicates ripping a CD is in progress When ripping is complete the ripping CD complete message appears The ripped tracks are displayed in the Music gt Music Library of Media Center and in the Library of Windows Media Player The ripped tracks are copied Note to Start gt Music of the Desktop as album files To change the folder to save the ripped tracks to launch Windows Media Player and right click over the top taskbar and select More Options gt Rip Music gt Rip music to this location from the pop up menu Playing Ripped Tracks 1 Launch Media Center and select Music 2 If you select Music Library the album list appears including the ripped album lt albums gt Unknown Album 11 27 2006 4 1 Ripped music albums 3 Select an album to be played and click Play Album in the left pane 4 The album is played Using Playlists You can easily create manage and play a playlist with ripped m
104. d setting the monitor and LCD excessively bright Donothold the mouse with excessive force m Keep the monitor and LCD screen clean Do not press the keyboard touchpad or mouse with a lf you wear glasses clean them before using the excessive force COMPpEtE m Itis recommended connecting an external keyboard m When entering contents printed on a paper into the and mouse when using the computer for long periods computer use a static paper holder so that the height of time of the paper is almost equal to that of the monitor 19 Volume Control Illumination Headphones and Speakers m Do not use the computer in dark locations The Check your volume first to listen to music illumination level for computer use must be as bright so for reading a book m Indirect illumination is recommended Use a curtain to prevent reflection on the LCD screen VOLUME EE Operation Condition Check your volume m Do not use the computer in hot and humid locations m Use the computer within the allowed temperature and m Check if the volume is too loud before using humidity range specified in the User Guide headphones m It is not recommended using headphones for long periods of time m Any deviation from the equalizer default setting could cause hearing impairment m The default setting can be changed through software and driver updates without your intervention Please check the equalizer default setting before first usage Use Tim
105. d view files If the window does not appear click Start gt Computer _ Removable Disk F Mixed content options gt Play i using Windows Media Player sy Import pictures yf using Windows paw pictures using Windows enari ing vs Media Center General options sing Windows Explorer is 5 Speed up red dasar using Win yBoost Set AutoPlay defaults in Control Panel If a window asking to scan and change appears click Continue Without Scanning This will proceed Note to Step 2 above 3 You can save move and delete data by double clicking the corresponding drive Note Devices with Removable Storage 2 DVD Drive E Removable Disk F The device name of the card drive may differ depending on your computer model Since you can only use the card after formatting it if it is not formatted format the card referring to the descriptions of To format a memory card E p 56 Note Using a Memory Stick Duo Mini SD and RS MMC Since the above cards are too small you cannot insert the cards into the slot directly Insert the card into the dedicated adapter available from most electronic retailers and then insert the adapter into the multi card slot However depending on the adapter s body material some RS MMC cards may not be recognized properly Samsung recommend that you check the card is recognized correctly prior to purchasing To remove a memory card
106. duct Specification Adding a Memory Module 2 Insert a new memory module into the memory slot at an angle of approximately 30 degrees aligning it to Remove the screw on the memory compartment the angle of the memory slot 1 cover at the bottom of the computer using a screw driver Memory Slot Fixing Screw 3 Push the memory module down so that it is Close the memory compartment cover and fasten completely fixed If the memory does not fit easily the screw push the memory module down while pulling the memory module latches outward Removing a memory module Pull the memory module latches outward Note The memory module will pop up Remove the memory module out at an angle of 30 degrees Battery Please refer to the following instructions when running the computer on battery power without connecting the AC power A Lithium lon smart battery is supplied with this computer Before You Start Carefully read and follow the precautions printed on the battery before using the battery Precautions Use only chargers specified in the User Manual Caution Never heat the battery pack put it near or in a fire or use at a temperature higher than 60 C as this may cause fire Never cause a short circuit between the battery pack terminals or disassemble the battery pack Carefully read and follow the precautions printed on the battery and the safety instructions in the User Manual before using the battery Please
107. e Wireless LAN Specifications 802 11BG Card Intel 802 11BG WLAN mE The Name of the Registered Equipment Special Low Power Wireless Device for Wireless Data Communication Systems Item Detailed Specifications Dimensions 30 0 x 50 95mm Width X Height Physical Operating Same as System Operations Specifications Temperature And 3 errr ee errr rr ererrrrrrr rrr rrrrrrrrr err er rrr rere rer rr rrrrrerrr rrr rrrrrrrrrr rrr rrrrrrr rrr errr errrrrrr rrr rr rrrrrrrr rrr rrr rrr rrr rrr rere errr rrr rere errr errr rere ee eer ee ee eee ee Humidity Temperature Bet 0 C and 70 C Humidity Less than 85 power Power 3 3V Specifications Compatibility IEEE 802 11b IEEE 802 11g Operating System Microsoft Windows XP Vista Network l Media Access Protocol BE Specifications MAC CSMA CA Collision Avoidance with Acknowledgement ACK CCC CESHOEHHOS EEE EHOEEOEEE ESE SE EEHOSOHES EES EEEOEHEOT OE SEHE OE EEOSE SETHE ES OSHEE SOSH E ESSE EE ESOS SEES OEE EE HEHESEHSEO EO OSHE OE ESOSE SETHE SESH ESOSES EE SEHEEESOOSS ESTEE OS EEHEESOSEOE OTHE SE SEO ESTO TOESOOHES ESSE OSES OSESEOSEEEEEE Security Wired Equivalent Privacy support WEP 64bit 128bit WPA This device supports the Wireless LAN Security Specifications WPA Wi Fi Protected Access for Wi Fi To connect to a WPA wireless network you have to configure the settings according to the network connection environment For detailed setting information ask your network
108. e Break Time m lake a break for 10 minutes or more after a 50 minute period when working for more than one hour 20 Important Safety Information Safety Instructions Your system is designed and tested to meet the latest m Openings in the computer case are provided for standards for safety of information technology equipment ventilation Do not block or cover these openings However to ensure safe use of this product it is important Make sure you provide adequate space at least 6 that the safety instructions marked on the product and in inches 15 cm around the system for ventilation when the documentation are followed you set up your work area Never insert objects of any kind into the computer ventilation openings Ensure that the fan vents on the bottom of the casing KG Nae Olp ee eee ern tO NeIRguar are clear at all times Do not place the computer on a Caution oN a a a ee soft surface doing so will block the bottom vents m f you use an extension cord with this system make sure that the total power rating on the products plugged Setting Up your System into the extension cord does not exceed the extension _ cord power rating m Read and follow all instructions marked on the product and in the documentation before you operate your system Retain all safety and operating instructions for future use Do not use this product near water or a heat source such as a radiator m Setup the system on a stable work surf
109. e Next button Infineon Security Platform User Initialization Wizard Security Platform Features Configure your Infineon Security Platform Personal Secure Drive My Personal Secure Drive will have 50 MB of storage space Note Your Personal Secure Drive appears as a single encrypted file on the specified local drive to users who are not authorized to access it They cannot see any of the subfolders or files saved on the Personal Secure Drive My Personal Secure Drive will be saved on this drive C v 1 2 The operations to be performed appear Confirm the operations and click the Next button 1 When the registration is complete click the Finish button Encrypt File System EFS Function This function encrypts files and folders Using the EFS When the Confirm Attribute Change window Encrypt File System you can protect your important appears select the encryption coverage and click data or documents from malicious intruders the OK button This window only appears when selecting folder encryption The EFS function is only supported for some operating systems Confirm Attribute Changes You have chosen to make the Following attribute changes encrypt Do you want to apply this change to this Folder only or do you want to apply it to all subfolders and Files as well Select a folder or file to encrypt rightclick it and select Encrypt Apply changes to this Folder only a SPSys
110. e United States of America if an FCC ID number is on the system label The FCC has set a general guideline of 20 cm 8 inches separation between the device and the body for use of a wireless device near the body this does not include extremities This device should be used more than 20 cm 8 inches from the body when wireless devices are on The power output of the wireless device or devices which may be embedded in your notebook is well below the RF exposure limits as set by the FCC This Statement is not applicable to UMPC Ultra Mobile PC such as PDA Portable PC This transmitter must not be collocated or operate in conjunction with any other antenna or transmitter except the installed Bluetooth transmitter Operation of this device is subject to the following two conditions 1 This device may not cause harmful interference and 2 this device must accept any interference received including interference that may cause undesired operation of the device Wireless devices are not user serviceable Do not modify them in any way Modification to a wireless device will void the authorization to use it Contact manufacturer for service Caution FCC Statement for Wireless LAN use While installing and operating this transmitter and antenna combination the radio frequency exposure limit of 1mW cm2 may be exceeded at distances close to the antenna installed Therefore the user must maintain a minimum distance of 20c
111. e instructions on the manual supplied with the parts Failing to do so may cause damage to the product If the computer emits smoke or there is a burning smell disconnect the power plug from the wall outlet and contact a service center If your computer is a notebook computer make sure to remove the battery There is a danger of fire Do not use a damaged or modified CD Floppy Disk There is a danger of damaging the product or personal injury Do not insert your fingers into the PC Card Slot There is a danger of injury or electric shock Use recommended computer cleansing solution when cleaning the product and only use the computer when it is completely dried Failing to do so may cause electric shock or fire Emergency disk eject method using paperclip should not be used while the disk is in motion Make sure to use the emergency disk eject method only when the Optical Disk Drive is stopped There is a danger of injury Do not place your face close to the Optical Disk Drive tray when it is operating There is a danger of injury due to an abrupt ejection Check CDs for cracks and damage prior to use It may damage the disc and cause disorder of device and injury of user 15 Upgrade Related Take care when touching the product or parts The device may be damaged or you may be injured Take care not to throw or drop a computer part or device This may cause injury or damage to th
112. e password in the Confirm New Password field Click Create Password A password has been created The fingerprint registration begins Select the finger to be registered and click the Next button Register the fingerprint by placing your finger over the fingerprint identification sensor and placing it down slowly Repeat this at least 3 times until the next screen appears automatically Place the registered finger over the fingerprint identification sensor again and click the Next button 128 A window appears asking if you want to register an additional fingerprint Click No to proceed to the next window If you click Yes Steps 5 7 are repeated Proceed with the settings and click the Next button When the user profile backup instruction window appears read the contents and click on Backup Now Specify a path to save the user profile to and save the name When the backup file password window appears enter a password and click the OK button What is a user profile backup This is a function for backing up the OmniPass information fingerprint and user account information registered on a computer so that the information can be used on another computer For information on how to use a backed up user profile on another computer refer to the Help section 1 0 Click Done Registering information for using the fingerprint identification and integrated password authentication functions has been completed Turning
113. e product Make sure to close the computer cover before connecting the power after a reassembly There is a danger of electric shock if your body touches an internal part Use parts authorized by Samsung Electronics only Failing to do so may cause fire or damage the product Never disassemble or repair the product by yourself There is a danger of electric shock or file To connect a device that is not manufactured or authorized by Samsung Electronics enquire at your service center before connecting the device There is a danger of damaging the product Custody and Movement Related When moving the product turn the power off and separate all connected cables first The product might be damaged or users may trip over the cables For long periods of not using the notebook computer discharge the battery and preserve as it is detached The battery will be preserved at its best condition 16 Do not operate or watch the computer while driving a vehicle There is a danger of a traffic accident Please concentrate on driving Cautions on Preventing Data Loss Hard Disk Management Take care not to damage the data on a hard disk drive Causes that may damage the data of a hard disk drive and the hard disk drive itself A hard disk drive is so sensitive to external impact that an m The data may be lost when an external impact may cause loss external impact is applied to of data on the
114. e that users Can use LAN Local Area Network A communications network connecting computers printers and other devices within a local area such as within a building ALAN enables all connected devices to interact with other devices on the network The current LAN uses the Ethernet media access control method developed in the early 1980s To connect to an Ethernet a network card called a LAN card Ethernet card or network interface card is required To exchange data between computers a protocol is required besides the hardware equipment Windows Vista uses TCP IP as the default protocol LCD Liquid Crystal Display There are Passive Matrix and Active Matrix LCD types This computer uses the Active Matrix type LCD called a TFT LCD Since an LCD is implemented by transistors instead of a cathode ray tube unlike a CRT its size can be slim And because it does not blink it reduces eye strain Network A group of computers and devices such as printers and scanners connected by a communications link A network can be either small or large and can be connected permanently through cables or temporarily through telephone lines or wireless links The biggest network is the Internet a worldwide network Notification Area This refers to the right area of the Taskbar including program icons such as the volume control the power options and the time Power Schemes This refers to a pre determined power management option group For
115. ecommunications network protective operation and safety requirements The Department does not guarantee the equipment will operate to the users satisfaction Before installing this equipment users should make sure that it is permissible to be connected to the facilities of the local telecommunications company The equipment must also be installed using an acceptable method of connection In some cases the inside wiring associated with a single line individual service may be extended by means of a certified connector assembly The customer should be aware that compliance with the above conditions may not prevent degradation of service in some situations Repairs to certified equipment should be made by an authorized Canadian maintenance facility designated by the supplier Any repairs or alterations made by the user to this equipment or equipment malfunctions may give the telecommunications company cause to request the user to disconnect the equipment Users should make sure for their own protection that the electrical ground connections of the power utility telephone lines and internal metallic water pipe system if present are connected together This precaution may be particularly important in rural areas To avoid electrical shock or equipment malfunction do not attempt to make electrical ground connections by yourself Contact the appropriate inspection authority or an electrician as appropriate Caution The Ri
116. ect a LAN cable to the computer s LAN port 4 Right click over the Local Area Connection and select Properties T z SDAN i Network and Internet Network Connections gt File Edit View Tools Advanced Help By Organize S Views v Disable this network device Diagnose this connec Name Status Device Name Connectivity Network Category Ow LAN or High Speed Internet 1 Local Area Connection ork cable unplugged Intel R PRO 100 __ Disable Status Diagnose Bridge Connections Create Shortcut Delete Rename Click Start gt Control Panel gt Network and Internet gt Network and Sharing Center The LAN Device name may differ depending on your computer s Network Device Note 3 Click Manage Network Connections from the left pane Select Internet Protocol Version 4 TCP IPv4 from the Networking tab and click Properties Local Area Connection Properties Connect using BF OCOC This connection uses the following items O Client for Microsoft Networks G05 Packet Scheduler J File and Printer Sharing for Microsoft Networks wi Intemet Protocol Version 6 TCP IP v6 S Intemet Protocol Version 4 TCP Pwd wi Link Layer Topology Discovery Mapper 1 2 Driver wi Link Layer Topology Discovery Responder Uninsall Properties Description Transmission Control Protocol Intemet Protocol The default wide area network protocol that provides communication across diverse
117. ect a folder or file to be backed up and then click the Next button 4 Enter a description for the backup in the Description field so that you can easily recognize it later and specify the Save Path If your computer has a DVD Writer you can specify the DVD drive as the Save Path If you have specified a hard disk drive or a removable disk as the Save Path the SamsungRecovery SamsungData folder is created on the corresponding drive e g D and the data is saved to the folder Take care to not delete the folder by mistake or on purpose 5 6 3 4 5 6 If you click the Next button the Data Backup begins If you have selected the DVD drive as the Save Path the Enter a blank DVD message appears Insert a blank DVD and click the OK button The Backup is completed message appears Data Restore When backing up onto DVD Turn the computer on and insert the backup DVD into the DVD drive When backing up to another drive Proceed to Step 2 Click Start gt All Programs gt Samsung gt Samsung Recovery Solution gt Samsung Recovery Solution When you cannot start Windows turn the computer on and press the F4 key in the boot screen to enter restoration mode When the initial menu screen appears click Restore and then click Data Restore Select a backup item to be restored in the backup list and click the Next button Select a folder for the restoration and click the Next button D
118. ed Bluetooth ID Note To use the Bluetooth headset Bluetooth Pairing Mode is required For the procedures to set up Pairing Mode refer to the Headset Manual 5 Enter the PIN in the device PIN field and click the Next button E Do you need a passkey to add your device Q To answer this question refer to the Bluetooth section of the documentation that came with your device f the documentation specifies a passkey use that one C Choose a passkey for me Use the passkey found in the documentation Let me choose my own passkey C Dont use a passkey You should always use a passkey unless your device does not support one We recommend using a passkey that is 8to 16 digits long The longer the passkey the more secure it will be NI For pairing a PIN is required Since a PIN is provided by the headset manufacturer refer to the Note corresponding manual 6 If the Completing the Add Bluetooth Device Wizard window appears click Finish 7 The stereo headset is connected and you can now use the Bluetooth headset normally If you cannot hear sound from the headset you N have to check Playback Device setting Click the Start gt Control Panel gt Hardware and Sound gt Sound and make sure the default Playback Device is set to Bluetooth headset Note Exchanging Files between Bluetooth Select a computer to send the file to and click the Computers OK button Seect Bluct
119. ed below Infineon Security Platform Initialization Wizard the Next button Initialization Initialize or restore a Security Platform Click Start gt All Prog rams gt Infineon Secu rity Do you want to initialize a new Security Platform or restore a Security Platform from a Backup Archive Platform Solution gt Security Platform Management gt User Settings Alternatively double click the Security Platform M icon in the aia le le aa Taskbar 2 If a window appears asking whether you want to start The Infineon Security Platform Initialization Wizard click OK In the start screen click Next If the Trusted Platform Module activation screen N appears check TPM State in the BIOS setup and make sure TPM State is set to Enable amp Activate For how to check TPM State in the BiOS setup refer to the Create Security Platform Owner Initializing a TPM chip section Provide a Security Platform Owner Password Infineon Security Platform Initialization Wizard The Security Platform must be initialized before it can be utilized by individual users After finishing this wizard you will become the owner of this Security Platform Access to the Security Platform Owner functions are protected with the Owner Password Note you should memorize the Security Platform Owner Password If you forget this password you will not be able to administrate this Security Platform Enter a password between 6 and 256 characters You can ch
120. ed to activate your trial software To request your trial key please visit www microsoft com office pctrial2007 Alternatively you can receive a product authentication key by connecting to the Internet and clicking the Microsoft Office 60 Day Trial icon on the Desktop However the creation of the authentication key may fail when protected by a company or school firewall Purchasing a Microsoft Office Product License If you decide to buy a full product license for one of the Microsoft Office suites listed below come back to us for a better price www microsoft com office pctrial2007 Microsoft Office Suites Microsoft Office Basic 2007 j Microsoft Office Small Business e 2007 H a Microsoft Office Professional 2007 o You won t have to install the Microsoft Office suite yourself but only if you buy from us The full version of the suites is already preinstalled on your PC We will sell you a license kit that includes the product key to unlock your full product software It s so easy Microsoft Office Product Suite Pricing is subject to change See http office microsoft com For more information on Microsoft Office contact Microsoft Corp www microsoft com office pctrial2007 A free 60 day Microsoft Office Professional 2007 Trial Demo is preinstalled on PC s sold during the event period only Note that you can use the Trial Demo only for
121. eless LAN The use of a wireless LAN may be restricted according to the environment and distance Obstacles such as walls or doors affect the use of a wireless LAN Install the AP in a high and open space 50cm from the wall and far removed from any other radio signal sources A4 Verify whether the AP is operating properly e When the AP is not operating normally turn off the AP wait a short while and turn it on again e Verify whether the AP s firmware is the most recent version Contact the AP manufacturer or the place where you purchased the AP for details of the AP firmware A5 Verify whether the AP has been properly connected to the network Verify whether the network is operating normally by connecting the wired network cable which has been connected to the AP to your computer A6 Check the network key settings encryption key again When automatic code conversion a passphrase function has been selected and data communication is not functioning even with a normal wireless connection it is recommended entering the network key encryption key manually A7 Check the AP settings as follows The following is recommended for a standard environment and thus may differ according to the specific wireless network environment e When several APs are present simultaneously check the channel settings for each AP When different APs are using nearby channels interference may occur between the electronic wave
122. ennnssunnanisniuisuauusnasusuasiensuisuausnnnsnsnsnannensnusiannesneisneaneee Data Sync You can synchronize PIMS data Outlook E mail address data with Bluetooth devices Synchronization such as a cell phone PDA another notebook computer ete See ole A You can exchange business cards with Bluetooth devices such as a cell phone PDA pUeiece ale another notebook computer etc Vcard Exchange Poe Sound Output A You can output computer sound to another Bluetooth device or vice versa HID Connections You can connect and use Bluetooth peripherals such as a keyboard mouse joystick etc For more information about using the Bluetooth function refer to the online help of the Bluetooth Device Note Using Bluetooth The procedures to exchange files between computers supporting Bluetooth and to use other Bluetooth devices are described below Using Bluetooth Devices Connecting Headset supporting Bluetooth As an example the procedures to connect to a headset supporting Bluetooth will be described below Searching for Bluetooth devices corresponds to Steps 1 to 4 and may be slightly different depending on the device 1 To connect to another device via Bluetooth double click the Bluetooth icon Eon the Taskbar If the the Bluetooth icon does not appear on the Taskbar click Start gt Control Panel gt Hardware and Sound gt Bluetooth Devices gt Options Note and select the Show the Bluetooth icon in
123. equipment off and on the user is encouraged to try to correct the interference by one or more of the following measures Caution Reorient or relocate the receiving antenna Increase the separation between the equipment and receiver Connect the equipment into an outlet on a circuit different from that to which the receiver is connected Consult the dealer or an experienced radio TV technician for help If necessary the user should consult the dealer or an experienced radio television technician for additional sug gestions The user may find the following booklet helpful Something About Interference This is available at FCC local regional offices Our com pany is not responsible for any radio or television inter ference caused by unauthorized modifications of this equipment or the substitution or attachment of connecting cables and equipment other than those specified by our company The correction will be the responsibility of the user Use only shielded data cables with this system 28 Intentional emitter per FCC Part 15 Low power Radio LAN type devices radio frequency RF wireless communication devices operating in the 2 4 GHz Band may be present embedded in your notebook system This section is only applicable if these devices are present Refer to the system label to verify the presence of wireless devices Wireless devices that may be in your system are only qualified for use in th
124. f the Setup Confirmation window appears select Yes and press lt Enter gt The system is restarted To use the TPM chip you can initialize the Security Platform Reinstalling Software You can reinstall software using the System Software Media when a device driver or computer application is not working properly Before You Start When software is not working properly it is recommended removing the software using the Add or Remove Programs of the Control Panel and reinstalling the software using the System Software Media The System Software Media is supplied as a CD or DVD depending on your computer model Running the System Software Media The System Software Media will launch Select an instillation option to start the installation The System Diagnosis function enables users to diagnose the system connectivity any system problems and resolve FA System Software Media Se these problems ee System Software Media What is SYSTEM SOFTWARE MEDIA Insert the Syste m Software Media into the CD SYSTEM SOFTWARE MEDIA is a CD DVD thatis provided by Samsung Computers to enable d rive If the Auto Play wi nd OW appears select Ru n the easy re installation of drivers and software in case of system crash SoftwareMedia in the Install or Run Program field T A Standard Installation Minimum Installation Custom Installation Cancel 2 In the User Account Control window click Allow EB If you are no
125. fy the path to save the emergency recovery file to enter the emergency recovery token password and click the Next button An emergency recovery file is used to restore the TPM authentication information when it is damaged by a system error Infineon Security Platform Initialization Wizard Emergency Recovery i Oo Configure Emergency Recovery Token Emergency Recovery requires a Recovery Token This Token is protected with a dedicated password Create a new Recovery Token Use existing Recovery Token File location Browse i Recommendation Save the Emergency Recovery Token on a removable medium e g a memory drive which is kept safely Enter the token password 6 256 characters Password I Confirm Password Save an emergency recovery file to a hard disk drive In addition also make a backup of the emergency recovery file to a removable disk in case of a hard disk error after completing the user registration 8 Click the Browse button and specify the path to save the password reset file to enter a password for resetting the password and click the Next button amp Infineon Security Platform Initialization Wizard Password Reset i o Configure Password Reset Token Resetting users passwords requires a Password Reset Token This Token is protected with a dedicated password Create a new Token Use an existing Token Recommendation Save the Password Re
126. ge desktop background Check this computer s security status Customize colors Allow a program through Windows Firewall Adjust screen resolution Network and Internet Clock Language and Region Connect to the Internet G2 Change keyboards or other input methods View network status and tasks E Change display language Set up file sharing Ease of Access Hardware and Sound Let Windows suggest settings Play CDs or other media automatically Optimize visual display Printer Mouse Additional Options Programs Uninstall a program Change startup programs Mobile PC Change battery settings Adjust commonly used mobility settings System and Maintenance Using this function you can configure Windows performance options Using this function you can check the current security status to protect the computer and configure the security settings for the firewall spyware etc POPP OOS EOE EOE HEH EEOEEE SOOO EET HEHE EEE TOTO EOETEEOEEH HOH TEE EOE H OEE EEEOOEEE SHEET O SOHO E HOOT ETO OE ETOH EEE SO TEOTEEEOOE STOO TELE ETETEOEEHTOOEETE TOES ESHEETS EOETETOOEEE THEE T OTOH TE SOHO E TEETH ETHOS OEEETHEOEHETE SOLE TELOEETELOEEE EE SEEEESELOLEEEEEEE EE ETELELEEEEE ED EOOOD Network and Internet Using this function you can check the network status and configure the settings You can change the Internet connection settings Using this function you can add a printer and other hardware change the settings and update the device drivers
127. ging the computer or overheating the inside of the computer N P Ver 1 3 Power Related The power plug and wall outlet figures may differ depending on the country specifications and the product model Do not touch the main plug or If the power cord or power outlet Plug the power cord firmly into power cord with wet hands makes a noise disconnect the the power outlet and AC adapter power cord from the wall outlet Failing to do so may cause fire and contact a service center hazard There is a danger of electric shock Do not exceed the standard There is a danger of electric shock capacity voltage current of or fire hazard a multiplug or power outlet extension when using it for the product There is a danger of electric shock or fire hazard Do not unplug the power cord out by pulling the cable only Do not use a damaged or loose yP g y main plug or power cord or If the cord is damaged it may power outlet cause electric shock There is a danger of electric shock or fire hazard 7 o O N 8 Do not bend the power cord excessively or do not place a heavy object over the power cord It is especially important to keep the power cord out of reach of infants and pets If the cord is damaged it may cause electric shock or fire If water or another substance enters the power input jack AC adapter or the computer disconnect the power cord and contact the service center Damage to the device
128. grams gt Samsung gt User Guide gt User Guide in this order from the menu Samsung gt User Guide gt User Guide Copyright 2008 Samsung Electronics Co Ltd Samsung Electronics Co Ltd owns the copyright of this manual No part of this manual may be reproduced or transmitted in any form or by any means electronic or mechanical without the consent of Samsung Electronics Co Ltd The information in this document is subject to change without notice due to improving the performance of the product Samsung Electronics shall not be liable for any data loss Please take care to avoid losing any important data and backup your data to prevent any such data loss Precautions for Operating System Support The operating system OS installed on this product is the latest version of Windows Vista Other operating systems Windows 98 Windows ME Windows 2000 Windows 2003 server UNIX and LINUX other Windows Vista versions etc other than the operating system already installed on this computer are not supported If a problem occurs because of the installation of another operating system the company will not provide technical support a replacement or refund and if our service engineer visits you due to this problem a service charge will be applied In addition installing a program that does not support Windows Vista may cause the program to not work properly In this case ask the corresponding software
129. hat the power e eae Power plans can help you maximize your computer s performance or conserve energy Make a plan active by selecting it or choose a plan and customize it by changing its power settings Tell me more Choose what closing the lid about power plans does Plans shown on the battery meter Create a power plan Choose when to turn off the joan LE Samsung Optimized Change plan settings display Change when the computer Power saver Battery life 009999 sleeps Change plan settings Performance 99 Multimedia a Change plan settings Multimedia Show additional plans Samsung Optimized This mode is appropriate for normal conditions It maximizes the system performance when the computer is running on AC power while maximizing the battery usage time when the computer is running on battery power Multimedia This mode is appropriate for a multimedia environment that requires maximum system performance Therefore the battery usage time may be reduced in this mode Using the Easy Battery Manager power options To use the Easy Battery Manager power options after reinstalling Windows you have to install the Easy Battery Manager Note manually using the system software media Since power options in Easy Battery Manager aim at maximizing the battery usage time programs requiring high performance may slow down when using the battery In this case it is recommended connecting the AC adapter or selecting Power Sa
130. he headset and cannot connect to the headset even if the headset is found Disconnect the connection to the other device and then start the search again If the headset is connected to a power adapter you cannot make a Bluetooth connection Disconnect the power adapter and then retry In general a Bluetooth headset has 2 operating modes On Off mode and Pairing mode To connect the headset to another Bluetooth device such as a PC or cell phone the headset must be in Pairing mode Switch the headset to Pairing mode and then retry the search operation In general the headset in Pairing mode automatically returns to On Off mode after a certain period of time Qin is no sound or sound is intermittently interrupted after connecting a headset A1 If your headset is a mono headset check if a mono headset connection has been made In this case to resolve the problem complete the procedures below Double click over the Bluetooth icon on the Taskbar select the Audio tab and check the connection status of the Bluetooth Hands Free Audio for the headset in the connected device list If it is not connected right click over the device and select Connect from the pop up menu Right click over the Speaker icon on the Taskbar select Playback Devices and make sure that the Bluetooth Hands free Audio is enabled If not right click over Bluetooth Hands free Audio and select Set as Default Device A2 If your head set is a stereo he
131. i et Ask Options Help Search Windows Basics Security and Maintenance Windows Online Help la Table of Contents Troubleshooting What s new Find an Answer Introduces the basic usage of the computer and the Windows operation system wIngOws BASICS Ld You can learn tasks and tools necessary to use the computer ee ae cad EE EEE E E TI N ol ese ele car E A FE VAE OE NEEN NAE es hae eestor eileen venenatis ae eter EA AE E T f You can view help on computer protection and security Maintenance C O S AE ee a Windows ONLINE HELP k If your computer is connected to the Internet you can view the necessary information online Table of Contents The help pages are arranged by subject so that users can easily find the relevant information f You can view possible problems that may occur while using Windows and solutions to the Troubleshooting P y g problems What s new You can view help for new Windows Vista features Windows Vista Screen Layout If you turn the computer on the Desktop screen appears The desktop is the working area on the computer It consists of a large workspace and a taskbar at the bottom as shown in the figure below The screen layout may differ depending on the computer model and the operation system version Note 1 Recycle Bin 2 Shortcut 8 Gadget Icons Sica J r Internet Internet Explorer ey E mail SAMSUNG Windows Mail Documents Pictures Music NI
132. igure the sound device in the Control Panel whenever you connect the HDMI TV in order to hear sound from the computer on the TV The screen images and terms may differ from actual product depending on the computer model Note Right click over the Volume Control icon hin the 1 notification area at the bottom right of the Desktop and select Playback Device Alternatively click the Control Panel gt Hardware and Sound gt Sound 2 If the default Playback Device is set to Speakers change it to Digital Output Device HDMI or HDMI Device click Set as Default and then click OK yen i Select a playback device below to modify its settings F Digital Output Device HDMI High Definition Audio Device Working Speakers Realtek HD Audio With EDS Working Configure device list depending on the computer model In this case turn on the TV connect the TV to the computer Note using a HDMI cable and then switch to HDMI or LCD HDMI Clone or LCD HDMI DualView mode using the Shortcut Key Fn F4 HDMI Output Device may not appear on the playback tv To listen to sound on the computer after disconnecting the HDMI TV you have to set the Caution Play Device to Speakers Using Dual View Dual View enables users to expand their computer screen over two display devices Dual View is convenient when a wide operating space is needed In addition since Dual View operates as
133. ine Media is a service provided by content providers via the Media Center You can enjoy all kinds of multimedia content such as movies news sports etc over the Internet a To use Online Media your computer must be connected to the Internet For problems encountered while using Online Note Media contact the corresponding online service provider Online Media content services are not the responsibility of the computer manufacturer Chapter 8 Appendix Reinstalling Windows Vista Using Samsung Recovery Solution Optional Samsung Recovery Solution Functions Using Samsung Recovery Solution Q amp A Display Related Modem Related Wired Network LAN Related Wireless Network WLAN Related Game and Program Related Bluetooth Blu Ray Optional Other Try the Microsoft Office Trial Demo Free for 60 Days Optional Product Specifications Glossary Index 185 189 189 191 196 196 197 ek 200 204 205 207 208 209 211 221 224 Reinstalling Windows Vista You can reinstall Windows using the System Recovery Media for Windows Vista when Windows is no longer working properly For models supplied with a System Recovery Media For models supplied with the Samsung Recovery Solution you can reinstall Windows using the Samsung Recovery Solution Before You Start A System Recovery Media may not be supplied depending on your computer model m If you cannot start Windows or if you want to delete
134. is Blu ray Disc Storage Capacity 25 GB 50 GB 0 65 GB Data Rate 36 Mbps 7 8 Mbps Supported Resolution 1920 X 1080 p 720 X 480 320 X 240 Data Rate The amount of data that can be read or written onto a storage media per second Supported Disk Types Blu Ray supports the following disk types Type Function IAS E T roscoe anatatehanintnnt ee aaa wae Ar Ree eee ees outa eee e rrr Rn This only supports BD R Ver 1 1 and BD RE Ver 2 1 or later About Blu Ray You can add frequently used l Favorites ai The Cyberlink Hi Def Suite BD ROM optional program functions here for quickier access is supplied so that users can easily use multimedia odie You can watch Blu Ray and DVD functions such as playing Blu Ray DVDs and burning data A ayer movies DVDs CDs OIIE II EOP EN T PO E E PEN E E EIE A E A N You can burn data files onto a CD Data l l a l or DVD disc Fore oe eat e cesc oon o Ie a a 0 lll ee the help section of the corresponding program i You can burn a music WMA CD or oes WMA DVD and rip an audio CD Click Start gt All Programs gt CyberLink Hi Def You can create a DVD title archive Suite gt CyberLink Hi Def Suite gt CyberLink Hi Video amp Photo HDV DV video edit video and burn f a DVD folder Def Suite Alternatively double click the CyberLink iccceccccccecccessesssvsssussseesuesvessesiesvessssssssvessessesseeseesessesseereeseesseaeeseeseesees Hi Def Suite icon cy on the De
135. is feature enables only the writer and the recipient to read the email File and folder encryption with Encrypting File System EFS This feature enables encrypting files and folders using EFS File and folder encryption with Personal Secure Drive PSD This feature enables saving important data by creating a virtual drive Infineon Security Platform User Initialization Wizard Security Platform Features Choose Security Platform Features Select the Security Platform Features you want to configure and click Nest to continue For details on Security Platform Features click Help Security Platform Features Secure e mail File and folder encryption with Encrypting File System EFS File and folder encryption with Personal Secure Drive PSD Not detectable Not configured Not configured 6 To create an encryption certificate to use the TPM program click the Select button Infineon Security Platform User Initialization Wizard Security Platform Features 1 oO Encryption Certificate Infineon Security Platform can enhance file and folder encryption by providing additional protection for the key used to encrypt and decrypt data For more information on Infineon Security Platform enhancements to file and folder encryption click H elp File and folder encryption is configured to use the following Certificate Issued To Issued By Expiration Thumbprint Click Select to select ano
136. isplayed 5 The restoration progress message appears after the in the progress screen Whenever burning a DVD computer boots up in restoration mode If you click is completed the Insert the next DVD message OK the restoration begins will appear Continue the backup according to the instructions If multiple DVDs have been used for a Complete Backup whenever burning a DVD is completed the Insert the next DVD message will appear 7 When the Restart the System message appears after the backup is complete click OK to restart the system When the Restart the System message appears after the restoration is complete click OK to restart the system The Complete Restore has been completed User Data Backup Restore Data Backup enables you to save specific files or folders onto another drive or DVD Data Restore enables you to restore data using the data saved by a Data Backup when data is lost This guide describes the Backup and Restore procedures on the basis of backing up and restoring by using DVD O Data Backup Click Start gt All Programs gt Samsung gt Samsung Recovery Solution gt Samsung Recovery Solution When you cannot start Windows turn the computer on and press the F4 key in the boot screen to enter restoration mode 2 When the initial menu screen appears click Backup and then click Data Backup 3 In the data selection screen select either Basic Selection or Select from all sel
137. item Boot Device Priority Boot priority order D D 3 USB KEY Not Installed 4 USB CD Not Installed 5 USB FDD Not Installed 6 USB HDD Not Installed 2 Press lt Enter gt on the Boot Device Priority item Main Advanced Security Boot Device Priority Item Specific Help NumLock Off Enable Keypad By NumLock 7 PCI BEV Not Installed 8 Select system boot options Summary screen Disabled Boor time Diagnostic Screen Disabled PXE OPROM Only with F12 Brightness Mode Control Auto Wireless Device Control Always On Excluded from boot order PCI SCSI N A USB ZIP N A USB LS120 N A Legacy Network Card Legacy Smart Battery Calibration Press the F10 key to save the settings and exit Setup The highest boot priority device is now set to the Hard Drive Upgrading Memory One or more memory modules are installed on the computer There are 2 memory slots and users can replace the installed memory or add new memory Before You Start a Replace or install new memory only after shutting the computer down completely Do not replace or install memory when the computer is in Sleep mode Disconnect main power plug and remove the battery before continuing To utilize the dual channel feature using memory modules with the same specifications of the same capacity and from the same manufacturer is recommended a Only use the same type of memory as specified in the Pro
138. k Start recording to start a recording w Sound Recorder Using EDS The EDS function enables you to experience more stereophonic sound using stereo speakers 1 Right click over the Volume icon e in the Taskbar and select Playback Devices P 2 Select Speaker in the Play tab and click Properties Select the Samsung EDS tab in the Speaker 3 Properties window Unselect Disable Samsung EDS Enhanced Digital Sound and then select a mode g Speakers Properties a Samsung EDS Speaker Music Mode O Headphone Music Mode D Speaker Movie Mode Headphone Movie Mode Auto Volume Control Automatically match volume levels across all digital sounds Samsung EDS Copyright c 2007 SAMSUNG Electronics Co LTD ox is p Y 4 Note To use the Auto Volume Control function select Auto Volume Control What is Auto Volume Control Auto Volume Control is a function that maintains the same volume level for all digital sources The volume level of playing music changes for each file even if the player volume is fixed If you use the Auto Volume Control function the volume level will remain the same However if the Auto Volume Control function is activated the volume control function of a multimedia player such as Windows Media Player may appear to not work In this case click over the volume icon e in the notification area of the Taskbar an
139. king up onto DVD Save Path If your computer has a DVD Writer you Turn the computer on and insert the backup DVD can specify the DVD drive as the Save Path into the DVD drive If there are multiple backup DVDs insert the first Backup Point 20 02 2007 DVD Backup Capacity 5 4GB sas My games and programs instal complete z When backing up to another drive Save Path D Local Disk 140 5GB Available F Det koel Dik 140 568 Avalabie Proceed to Step 2 Select Drive D 2 Click Start gt All Programs gt Samsung gt Samsung Recovery Solution gt Samsung Select the DVD drive Recovery Solution 5 If you click the Next button the system restarts in When you cannot start Windows turn the computer restoration mode and the Complete Backup begins on and press the F4 key in the boot screen to enter If you have selected the DVD drive as the Save Path restoration mode the Enter a blank DVD message appears Insert a blank DVD and click the OK button 3 When the initial menu screen appears click Restore and then click Complete Restore Samsung Recovery Solution supports DVD R DVD R Q DVD RW and DVD RW but does not support CD R CD RW DVD RAM DVD DL Dual Layer HD DVD 4 Select a Complete Backup restoration point in the e BUHR restoration point selection screen and click the Next button The system is restarted 6 The Complete Backup begins If multiple DVDs are required the expected number of DVDs is d
140. l from the Guide Moving the mouse will display the play control buttons Click the ch or ch buttons to switch channels Using the play control buttons while watching TV Moving the mouse will display the play control buttons Select Pause Play Fast Forward Rewind or Skip according to your requirements Recording a TV Program The procedures to record the current program and reserve a recording will be described below gt Recording the current program 1 Moving the mouse will display the play control buttons When the play control buttons appear click the Record ta button A red dot appears indicating that a recording is in progress and the recording begins 2 To stop the recording right click and select Stop Recording from the pop up menu Alternatively move the mouse and double click the Record button gt Recording or reserving a recording in the Guide 1 Launch the Media Center and select TV Movies 2 Select Guide from the menu 3 Move to a program to be recorded Right click over a program to be recorded and select Record A red dot appears over the program list fthe selected program is scheduled to be N broadcast later the recording is reserved Note Recording a series Right click over a program to be recorded and select Record Series The Series Recording Indicator appears When the set time arrives the computer KH automatically wakes up from Sleep mode and starts recording
141. l protection is disabled message It is recommended activating the Windows Firewall for your computer s safety when you have disabled the McAfee Firewall To activate the Windows Firewall click Start gt Control Panel gt Security gt Turn Windows Firewall on or off gt On recommended When your Control Panel is set to the Classic View of Windows Vista or when you are using Windows XP click Start gt Control Panel gt Windows Firewall gt Change Settings gt On recommended I Using Samsung Magic Doctor Optional Magic Doctor is troubleshooting software provided by Samsung Computer A user can diagnose system problems via one click or by selecting diagnostic items Before You Start The screens used in this manual may differ from actual screens according to the program version Diagnosing the System When the system diagnosis is completed the diagnostic result appears If problems are found Diagnosing the System is a function to check system click the Cure button to correct the problem connections and diagnose problems affecting to system Samsung Magic Doctor starts the corrective operation and solve it operations Da Samsung Magic Doctor Click Start gt All Programs gt Samsung gt Samsung Kobis boni bea Magic Doctor gt Samsung Magic Doctor Network device disabled Firewall has been disabled McAfee VirusScan not installed Click on Diagnose the System to start diag
142. le size 755 98KB z This hotfix is for fixing possbile error of that can be generated in MSVBM60 DLL while programs created by Visual Basic are running E Install Do Not Install Pointing Stick Driver File size 224 12KB Sorrento Pointing Stick Driver install System must be restarted after the installation of this update This update must be installed separately from other updates Install Da Not Install View Installed Updates User Settings Install Updates Exit Windows update ET ER Updates that must be installed separately If you select Install for an update item that must be installed separately a message appears informing you of this Follow the instruction message to correctly install it Caution Automatic update items display By default your computer is configured to automatically search for updates If there is a new update available this is displayed in the notification area Click the balloon help icon in the notification area Here you will be able to find the latest available updates Samsung Update Plus has found new updates for your system Please click here to view the list of new McAfee SecurityCenter Optional McAfee SecurityCenter a virus spyware detection and protection software that includes a firewall function Hereafter referred to as McAfee is software that protects your PC from various Internet threats as well as detecting and removing viruses Before Y
143. ll The modem will not check the dial tone before making a phone call Configuring the Model in the Control Panel Click Start gt Control Panel gt Hardware and Sound Click on Phone and Modem Options in the Modem tab select an installed modem and click Properties In the Modem tab of the Modem Properties window unselect the Make a phone call after waiting for a dial tone option When the settings are complete click the OK button If you cannot make a phone call starting with a 0 such as 01432 01421 01433 etc this is because the private switching system is set to block long distance calls Ask your switching system administrator Q wher using the modem overseas A1 Check if the country setting of the modem is set to the current country Since each country has slightly different telecommunication values if the location is not set to the corresponding country the modem may fail to make a phone call Click Start gt Control Panel gt Hardware and Sound Click on Phone and Modem Options In the Dialing Rules tab click Edit 6 8 In the General tab of the Edit Location window set the Country Region to your current country enter the region code and then click the OK button A2 Since the shape of the phone line connector may differ depending on the country you are in you may have to buy a phone line connector to make a phone call from that country Qni can I receive a
144. lt of a program operation This is also called data Window View Functions If you have set up the Aero function you can use the window view functions Note f you want to use the Aero function click Start gt Control Panel gt Appearance and Personalization gt Window Color and Appearance Select Enable Transparency and Click OK If Appearance Settings window appears select Windows Aero from the color scheme and click OK gt Preview If you move the mouse pointer over a window button on the Taskbar you can preview the contents of the window without opening it 5 gt Switching between Windows This function arranges multiple windows in 3D so that users can easily view the windows Press the Windows logo Tab keys or click on Switch Windows E at the bottom left of the Desktop and the windows are displayed in 3D Control Panel Tools for configuring Windows are located in the Control Panel Opening the Control Panel Click Start gt Control Panel r e e Control Panel Home tox a gt Control Panel v o 2 Classic View Recent Tasks p Add or remove user accounts Customize colors System and Maintenance User Accounts and Family Safety Get started with Windows Set up parental controls for any user Back up your computer Add or remove user accounts Security Appearance and Personalization Check for updates Chan
145. m crash ao 7 Standard Installation Minimum Installation Custom Installation Cancel 146 Chapter 6 Settings and Upgrade LCD Brightness Control 148 BIOS Setup 150 Entering the BIOS Setup 150 The BIOS Setup Screen 152 Setting a Boot Password 154 Changing the Boot Priority 156 Upgrading Memory 157 Battery 159 Installing Removing the Battery 159 Charging the Battery 160 Measuring the Remaining Battery Charge 160 Extending the Battery Usage Time 161 Using the Security Lock Port 164 LCD Brightness Control You can adjust the LCD brightness in 8 levels Before You Start The LCD brightness is the brightest Level 8 when the computer is running on AC power and it becomes dimmer when running on battery power Controlling the Brightness Using the Keyboard Adjust the LCD brightness by pressing the Fn t key or the Fn key The LCD brightness can change up to 8 levels and the brightness increases by 1 level when pressing the Fn t key once Maintaining the changed LCD brightness even after turning the computer on again To maintain the LCD brightness set by using the brightness control keys or through the Power Options follow the Note procedures below 1 Turn the computer on and press the F2 key when the SAMSUNG logo appears on the screen to enter the BIOS Setup 2 Select the Boot menu and set the Brightness Mode Control item to User Control 3 Press the F10 key to save the set
146. m from the antenna at all times Caution This device can not be colocated with another transmitter and transmitting antenna This Statement is not applicable to UMPC Ultra Mobile PC such as PDA Portable PC FCC Part 68 If fitted with a modem device This equipment compiles with part of the FCC rules On the back of this equipment is a label that contains among other information the FCC registration number and ringer equivalence number REN for this equipment If requested this information must be provided to the telephone company This equipment uses the following USOC jacks RJ11C An FCC compliant telephone cord and modular plug is provided with this equipment This equipment is designed to be connected to the telephone network or promises wiring using a compatible modular jack which is Part 68 compliant See Installation Instructions for details The REN is used to determine the quantity of devices which may be connected to telephone line Excessive RENs on the telephone line may result in the devices not ringing in response to an incoming call In most but not all areas the sum of RENs should not exceed five 5 0 To be certain of the number of devices that may be connected to a line as determined by total RENs contact the local telephone company to determine the maximum REN for the calling area If the terminal equipment causes harm to the telephone network the Telephone Company will notify you in advan
147. mbedded wireless device 32 European Radio Approval Information for products fitted with EU approved radio devices This Product is a Notebook computer low power Radio LAN type devices radio frequency RF wireless communication devices operating in the 2 4 GHz band may be present embedded in your notebook system which is intended for home or office use This section is only applicable if these devices are present Refer to the system label to verify the presence of wireless devices Wireless devices that may be in your system are only qualified for use in the European Union or associated areas if a CE mark CE with a Notified Body Registration Number and the Alert Symbol is on the system label The power output of the wireless device or devices that may be embedded in you notebook is well below the RF exposure limits as set by the European Commission through the R amp TTE directive See 802 11b and 802 11g restrictions for specific countries or regions within countries under the heading European Economic Area Restrictions below Caution Translated Statements of Compliance English This product follows the provisions of the European Direc tive 1999 5 EC Danish Dette produkt er i overensstemmelse med det europ iske direktiv 1999 5 EC Dutch Dit product is in navolging van de bepalingen van Europ ees Directief 1999 5 EC Finnish Tama tuote noudattaa EU direktiivin 1999 5 EC maarayk si
148. mputer model and the usage Q procedures may differ depending on the version The screen images in this document may differ from actual product For models with an SSD Solid State Disk Samsung Recovery Solution is not provided Samsung Recovery Solution Functions Restore Function Using this function you can easily restore your computer to a previous normal state without using the System Recovery Media or the Windows Installation CD when your computer is no longer working properly or fails to boot up due to a problem If you have backed up data you can restore the backup data Basic Restore This function quickly restores major Windows files C Windows without touching the user configuration and data on the C drive Backup Function Restore Functions l Complete Restore Data Restore This function deletes the entire C drive and then This function restores the user restores the contents of the C drive completely data if the user previously backed up data Initial Status Restore This function restores the computer to the initial status saved when the computer was run for the first time after it was purchased Complete Backup Restore This function restores the computer to the point where the user performed a Complete Backup You can backup the entire C drive or all your data to another hard disk drive or DVD You can restore the backed up drive or data using the Restore function Initial Status Backu
149. n navigate through the menu in the up down left and right directions The Menu and Play Control buttons appear for a N moment only when moving the mouse pointer The Media Player window size decreases if you perform another task after playing a media file Note Pictures Videos In Pictures Videos you can view pictures and videos registered to the Media Center library In addition you can also view files not registered to the library by registering them as well as viewing files on a removable disk Registering to the Library The procedures to register files to the library are described below 1 Launch Media Center and select Pictures Videos gt Picture Library or Video Library When you run it for the first time an Add window may appear In this case you can add files Note according to the instructions on the screen In the library menu right click and select Library Setup Burn View Small Library Setup Settings If the Library Setup screen appears select Add Viewing Pictures and Images Folder to Watch The procedures to view pictures and images registered to the library are described below AM Specify the path for the folder according to the aon instructions on the screen Ky Picture and image files are saved in the Computer gt Local Disk C gt Users gt User Accounts gt Picture Folder or Computer gt Local Disk C gt Note Users g
150. nd other rights owners Use of this copyright protection technology must be authorized by Macrovision Corporation and is intended for home and other limited viewing uses only unless otherwise authorized by Macrovision Corporation Reverse engineering or disassembly is prohibited ENERGY STAR Partner Fa As an ENERGY STAR Partner SAMSUNG has determined that this product meets the ENERGY STAR guidelines for energy ANOS efficiency Glossary The Glossary lists the terminologies used in this User Guide For terminologies other than these look in Windows Help Backup A way to save the current data to restore it later if necessary A backup is a way to restore computer data when the data or computer is damaged Client This refers to a computer that uses a shared network resource provided by a server DDR SDRAM Double Data Rate Synchronous Dynamic Random Access Memory DRAM is a memory type whose cells consist of a capacitor and transistor manufactured at a low price SDRAM is a memory type whose performance has been improved by synchronizing the clock with the external CPU clock DDR SDRAM is a memory type whose performance has been improved by doubling the operating speed of the SDRAM and is widely used nowadays This computer uses DDR SDRAM Device Manager An administrative tool used to manage computer devices You can add or remove hardware or update a device driver using the Device Manager Dire
151. nd to switch users are described below Adding User Accounts 5 Click Create a new account to add a new account Click Start gt Control Panel gt User Accounts and Family Safety 2 Manage Accounts Create New Account 4 Search View Tools Help Name the account and choose an account type his name will appear o e Welcome screen and on the Start menu 2 Click User Accounts gt Manage another account Standard user Standard account users can use most software and change system settings that do not affect other users or the security of the computer Administrator Administrators have complete access to the computer and can make any desired changes To help make the computer more secure administrators are asked to provide their password or confirmation before making changes that affect other users 3 Cl i ck C reate a new accou nt We recommend that you protect every account with a strong password Why is a standard account recommended 4 Enter a new username and select either Standard User or Administrator Removing User Accounts If there is only one administrator account for the Y computer you cannot delete the administrator account Note You can only delete another account when you are logged in as an administrator 1 Click Start gt Control Panel gt User Accounts and Family Safety gt User Accounts 2 Click Manage Another Account 3 Click on the user account to be dele
152. ndow appears for Windows Vista SP1 Click Install Now 5 If the User Agreement screen appears select I accept the license terms and then click Next gt For Windows Vista SP1 a window where you can select an installation option appears In this case click Custom When a window appears asking for the location to install the operating system to select the partition of the disk drive and then click the Next button Drive D includes an area to save the backup image ae used by Samsung Recovery Solution Installing Caution Windows to drive C is recommended m A If you click Drive Options Advanced you can delete format create or expand a partition Click on a function and proceed according to the Note instructions on the screen m When previous Windows installation files are in the selected partition a message appears informing you that the files and folders will be moved to the Windows old folder Click the OK button The subsequent steps are the same as those for Reinstalling in Windows p 187 Using Samsung Recovery Solution optional Samsung Recovery Solution provides a Restore Function that enables you to easily restore your computer to a previous normal state when a problem occurs with your computer as well as a Backup Function that enables you to easily save your computer s current status and your data Samsung Recovery Solution may not be provided or the version may differ depending on your co
153. ng down the left touchpad button Touchpad Scroll Function The touchpad scroll area provides the mouse wheel function scroll function Place your finger on the touchpad s right edge for vertical scrolling or the bottom edge for horizontal scrolling and then move your finger along the edge to scroll the screen vertically or horizontally CD Drive ODD optional An optical disk drive is optional and may differ depending on your computer model For detailed specifications refer to the catalogue Before You Start One of the following optical disk drives is installed on this computer or may not be provided depending on your computer model Drive Type Function DVD ROM Reads CD DVD RW Combo You can read CDs and DVDs and burn a CD You can read CDs and DVDs and burn CDs and DVDs DVD Super Multi l Supported DVD recording types include DVD R DVD RW DVD RAM BD ROM Optional You can read CD DVD BD BD Combo Optional You can read CD DVD BD and burn CD DVD BD RE Optional You can read CD DVD BD and burn CD DVD BD a Do not insert a cracked or scratched CD Otherwise the CD may break and damage the optical disk drive when the CD rotates at a high speed Caution When you clean a CD or DVD title wipe with a soft cloth from inside to outside Do not eject a CD when the CD operating LED is on Blu Ray drives are provided for some models only Inserting and Ejecting a CD Click the Eject bu
154. nger Equivalence Number REN assigned to each terminal device provides an indication of the maxi mum number of terminals allowed to be connected to a telephone interface The termination on an interface may consist of any combination of devices subject only to the requirement that the sum of the Ringer Equivalence Num bers of all the devices does not exceed 5 31 European Union European Union CE Marking and Compliance Notices Products intended for sale within the European Union are marked with the Conformit Europ ene CE Marking which indicates compliance with the applicable Directives and European standards and amendments identified below This equipment also carries the Class 2 identifier The following information is only applicable to systems labeled with the CE mark CE European Directives This Information Technology Equipment has been tested and found to comply with the following European directives EMC Directive 89 336 EEC with amending directives 92 31 EEC amp 93 68 EEC as per EN 55022 Class B EN 61000 3 2 EN 61000 3 3 EN 55024 m Low Voltage Directive Safety 73 23 EEC as per EN 60950 A1 A2 A3 A4 A11 Radio and Telecom Terminal Equipment Directive 1999 5 EC as per CTR21 if fitted with a modem device ETS 300 328 if fitted with a 2 4 GHz band embedded wireless device ETS 301 489 1 if fitted with a 2 4 GHz band embedded wireless device ETS 301 489 17 if fitted with a 2 4 GHz band e
155. nhances the program execution speed by using the embedded flash memory What is ReadyDrive A new Windows Vista technology that enhances the booting and drive access of the hard disk drive by using the embedded flash memory Turning the Intel Turbo Memory device off Unselect the device items in the Select a cache Note policy to use field in Step 2 above and restart the computer according to the instruction Check before installing another operating system such as Windows XP To remove Windows Vista the default operating system of this computer and to install a different operating system such as Windows XP you need to change the SETUP settings first Set the AHCI item in SETUP to Disabled before installing another operating system 4 Select Disabled and press Enter 5 Enter the Exit menu move to Exit Saving Changes and press Enter another operating system the company will not provide technical support a replacement or refund When the Save configuration changes and exit and if our service engineer visits you due to this now message appears select Yes and press problem a service charge will be applied Restrictions Y Intel Turbo Memory is only supported for Windows Note Vista This function is not available for any other operating system tv If a problem occurs because of the installation of Caution Enter Now you will be able to install a different operating system 1 Turn the computer
156. nitor number 2 to move the window Canceling Dual View Click the Start gt Control Panel gt Appearance and Personalization gt Adjust screen resolution Click on the Monitor Number 2 icon unselect Extend the desktop onto this monitor and then click Apply Adjusting the Volume You can adjust the volume using the keyboard and the volume control program Adjusting the Volume using the Keyboard Press the Fn key combination or Fn 7 key combination to adjust the volume Press the Fn key combination to turn the volume on or off Adjusting the Volume using the Volume Adjustment Program Click the Volume icon on the taskbar and slide the volume control bar to adjust the volume Mute Alternatively right click over the Volume icon and select Open Volume Mixer to adjust the volume 4 Volume Mixer Applications a g Speakers Windows Sounds Using the Sound Recorder The procedures to record sound using the Windows Recorder are described below 1 Connect a microphone to the microphone jack Right click over the Volume icon ga on the taskbar and select Recording Device Check if the microphone is set as the default recording device If this is the case it is already set as the default device If not right click over the microphone and select Set default Click Start gt All Programs gt Accessories gt Sound Recorder and clic
157. nosing the system Select items to be fixed and click the Cure button z Samsung Magic Doctor Restore the System m SUNIT ALE Te eles The Samsung Magic Doctor program diagnoses the system and fixes any problems found To run the program click the Diagnose the System button Restore the System Diagnose the System Exit mE Viewing My Computer Information You can view detailed information about your computer in Samsung Magic Doctor Click on the icon in the shape of a monitor at the bottom of the main program screen to view detailed information about the computer Da Samsung Magic Doctor SAMSUNG Fle C1007010 The Samsung Magic Doctor program diagnoses the system and fixes any problems found To run the program click the Diagnose the System button Restore the System Diagnose the System System Information CPU BIOS S N RAM HDD 126 r gt System Information System Purchase Date Unknown CPU Intel R Pentium R D CPU 3 00GHz BIOS Phoenix E3PL S N 123490EN400015 RAM 2 00 GBytes HDD C 52 43 GBytes D 27 60 GBytes HDD capacity is subeject to change because currently being used area by the system is excluded Graphics Driver Info Manufacturer NVIDIA Version 7 14 10 9677 Driver Info NVIDIA GeForce 6200 TurboCache TM Microsoft Corporation WDDM Sound Driver Info Manufacturer Realtek Version 6 0 1 53
158. ns i icon on the taskbar and click Connect to the Network Connect to a network Turn on activity animation Turn off notification of new networks Diagnose and repair Network and Sharing Center Select an AP to connect to and click Connect If there is a configured network key for the AP to connect to the Enter Network Key window appears Enter the network key in the window and then click the Connect button Disconnect or connect to another network Show ddl A R4_COM_18F Security enabled network wie SamsungWLAN Unsecured network ARM COM AV R6 2000 660 Security enabled network Sel up a connection or network Open hhetworkcand Shang Center Ask your network administrator for the network key if necessary Note When Connected to the AP is displayed click the Close button You can access the network Checking the network connection status Move the mouse pointer over the Wireless Network Connection E icon on the taskbar and the connection status is displayed Currently connected to COM AV SWL3300 B24 Access Local only Using the Easy Network Manager Optional Easy Network Manager is a program that helps configure the network settings Easy Network Manager provides the following features m You can easily configure the network and printer settings E p 101 102 E You can immediately use the network without having to define new network settings again after moving to another location
159. ns the numeric keyboard on or off If you turn the Scroll Lock on you can scroll the screen up or down without changing the cursor a Scroll Lock y y P oe location in some applications Screen Brightness Control To adjust the LCD brightness press the Fn t key combination or the Fn key combination The changed screen brightness is displayed at the center of the screen for a moment Volume Control To control the volume press the Fn 7 key combination or the Fn key combination You can mute the sound or cancel the mute function by clicking the Fn key combination Numeric Key The numbers are printed in blue on the numeric keys If Num Lock is turned on by pressing the Fn key combination you can use the numeric keys to enter digits Other Function Keys Application Key Performs the right click mouse function touchpad m Internet Explorer Quick Launch Key Fnt 4 Launches Internet Explorer Touchpad The touchpad provides the same function as a mouse and the left and right buttons of the touchpad plays the role of the left and right buttons of a mouse Before You Start a Use the Touchpad with your fingers Using a sharp object may damage the Touchpad If you touch the Touchpad or press the Touchpad buttons while booting up the Windows boot time may be extended Touchpad Use to move the cursor Touchpad Left Button You can select o
160. o view files ndows Explorer Set AutoPlay defaults in Control Panel 3 If the DVD title is not automatically played click Start gt All Programs gt CyberLink DVD Suite gt Power DVD gt CyberLink PowerDVD m Note Detailed Usage For more detailed usage click Start gt All Programs gt Cyberlink DVD Suite gt Power DVD gt PowerDVD Help DVD Region Code A DVD title has a region code according to the international specifications so that it can be played only in that specific region DVD titles with a region code will only play on DVD drives and program for playing with the same region code A DVD drive is sold with an empty region code and the region code is set when the user inserts a DVD title into the drive for the first time Whenever a DVD title is inserted with a region code different from that of the DVD drive the region code of the DVD drive is automatically changed to the region code of the DVD title However changing the region code of a DVD drive is limited to 5 changes After that the region code is permanently fixed to the last region code If you need to change the region code after changing the code 5 times contact a service center Although a service center can help you in this case you will be charged a service fee Using Additional Functions The Cyberlink DVD Suite provides functions to record data burn a DVD CD title edit videos photos etc 1 Click Start gt All Programs gt CyberLink
161. on in the Select File to be Sent screen 6 When the PIN input window appears on the computer to receive the file enter the PIN from Step 5 When the FTP file access privilege request for the F file reception notification window appears click the notification window If the Select Access Permission window appears click the OK button Usage Instructions Bluetooth devices to be connected must be within a 3m 10 ft distance For Bluetooth to operate smoothly use the computer in an open environment with no walls or obstacles in the way You can connect to only one Bluetooth device ata time for a phone connection data syncing electronic business card exchange FAX transmission reception sound related functions and serial port functions It is recommended using only one Bluetooth device at a time as connecting multiple Bluetooth or other wireless devices at the same time may slow or destabilize the Bluetooth connection Data communications via Bluetooth may be poor when the CPU load is at full capacity or there are insufficient system resources The Bluetooth function of a Bluetooth PDA mobile phone mouse or keyboard may be turned off To use them in connection with a Samsung computer supporting Bluetooth you must check if the Bluetooth function of the device to connect to is turned on For the procedures on turning on the Bluetooth function of a device refer to the relevant device manual The services p
162. oot Exit The items in the BIOS setup may differ depending on the product Item Specific Help lt Tab gt lt Shift Tab gt or lt Enter selects field Help Help for the selected item appears automatically The BIOS Setup Screen Advanced Security Boot Exit item Specific Help System Time 10 21 53 System Date 07 30 2004 lt Tab gt lt Shift Tab gt or lt Enter selects field SATA Port 1 HHHHHKHKH SATA Port 2 anandanann Menu Description pa EEIN EO aoaaa E E ENE NEE E E PTEE E EEA pr ener y ne i i o a vn l o a m oor ee snd chipaste EAEE E TE EENE E E ATT en EE i diaa A a a sa VILER E EPEN PAAIE OEE AALAN EN AAASTAL OE ease TE TE P o AIEA E i oo oo o o ony W l j APEEP E IPAE semen AEA EEEE ON E OT O IEN E A Exit Used to exit the Setup either saving the changes or not System Setup Keys In the Setup you have to use the keyboard F1 Press to view the Setup Help Lani incisions aE eeni woos tomove un and down ssi eee ISATA AONE ESEE aes oie means tents ENRON EAO o NEE PLIESNE EN OEE F a nen SA A EEIEIEE EEIEIE VEEE OAA ES I IAA PENAI SETETE P EIRETAT papi NE SE A PEE Ha PEPPE EE P EN AEEA AAA O AIE E A m EEE NEA E ETE A PASIEN PENT PEPEE CEIA E E E TAE poena entire oe shee i ooo EREE A A R AT E A A ANE AE AA p PITENEE ej PERNT ee ALPA EONA E OENE cans AI A E O ONON eeaysseces
163. ooth Device The procedures to exchange files between computers shone and wnodeane A with Bluetooth capability are described below D nada Anycal fi New device Hi New device 11 Audio devices a 590Plantronics D Already connected On the computer which is sending a file hereafter i i Computers workstations servers laptops PDAs Computer A right click the Bluetooth icon E on sf SAUSUNG a irae New device New device the taskbar and select File Transfer z Oo If you dont see the device that you want to add make sure that it is tumed on Follow the setup instructions that came with the device and then click Search Again Click Browse select a Bluetooth device to send the file to and click the Next button in the Select Bluetooth Device window Enter a PIN in the Bluetooth PIN Code field and click the Next button The Bluetooth PIN Code is a password used for NI connecting two Bluetooth devices The user just enters the same PIN Code E g same numbers on Bluetooth File Transfer Wizard Ea Select where you want to send the file 3 Seas a ee Note both Bluetooth devices to make the connection Send to Bosun note Use a passkey to ensure that you are sending the file to the corect device The passkey also protects the file from being viewed by others while it is sent to the other device Use a passkey Passkey 0000 5 Click Browse specify a file to be sent and click Next butt
164. or signatures on downloaded programs Do not save encrypted pages to disk Empty Temporary Internet Files folder when browser is cic Enable Integrated Windows Authentication Enable memory protection to help mitigate online attacks Enable native XMLHTTP support L Phishing Filter Disable Phishing Filter Turn off automatic website checki Takes effect after you restart Internet Explorer Reset Internet Explorer settings Deletes all temporary files disables browser add ons and resets all the changed settings You should only use this if your browser is in an unusable state 4 To not use the Phishing Filter select Turn off automatic website checking in the Settings field in Step 3 above User control function Using this function you can control the content your children can access You can determine for how long they can use the computer and the content they can access When you have finished the settings click OK to finish Configuring Parental Controls 1 Click Start gt Control Panel gt User Accounts and Family Safety gt Parental Controls Select a user to configure the Parental Controls for The User Controls window for that user opens 3 Click Parental Controls gt Use and configure the necessary settings in the Windows Settings at the bottom If you click OK the Parental Controls setting is completed eer g amp Parental Controls User Controls v Search p
165. ose IP address is to be changed Enter an IP after selecting the device Device Name Wireless Intel R Wireless WiFi Link 5300 Receive an IP Address Automatically IP Address aire DS OG Gateway Subnet Mask ees meee aoe Preferred DNS Back Next Cancel Select Device Select a device to be connected to the Internet Select either Wired LAN or Wireless LAN IP Settings To use a Static IP address fill in the fields For the IP address information ask your network administrator Obtain an IP address automatically Select DHCP to use this option automatic IP setting Click Add Printer and set up a printer according to F the wizard When the printer has been added click the Refresh button select the newly added printer and then click the Finish button To not add a printer click the Finish button Note When the network settings are complete the Do 8 you want to move to the newly added location now message appears Click the Cancel button An icon for the added location is created The network settings have been completed If you select OK the network settings for the added location are applied Do you want to mowe to the added location right now To add a new location repeat the procedures from Step 3 above Note Using in Another Location By configuring the network settings IP address printer To connect to a wireless LAN select the AP Setting setting
166. ot support burning the Blu Ray format Can I burn a Blu Ray disk using the CyberLink DVD Suite CDS A Although the CyberLink DVD Suite supports burning the CD and DVD formats it does not support burning the Blu Ray format 0 BD RE Can I save 25GB data onto the each side of a Blu Ray disk A The current Blu Ray disk standard does not support double sided recording Currently you can save data onto a single side only You can save 25GB data onto a single layer disk and save 50GB onto a dual layer disk A dual layer disk consists of two layers Q A The User Controls window appears when installing or running a program in Windows Vista In this case click Allow or OK to install or run the program However if you do not have an administrator account you have to enter the administrator password in the User Controls window and then click Allow or OK If no administrator password is set you can click Allow or OK without entering a password Try the Microsoft Office Trial Demo Free for 60 Days Optional Your new PC comes preinstalled with a free 60 day Microsoft Office Professional 2007 Trial Demo Starting the Microsoft Office Free Trial Demo Click Start from your Windows Vista operating system desktop Point to All Programs then point to Microsoft Office and then click on the specific Microsoft Office program you want to start for example Microsoft Office Word 2007 You will be prompt
167. ou Start For more detailed information on the program refer to the McAfee help You can register McAfee when connected to the Internet McAfee software is optional It may not be supplied for some models or it may be supplied through the McAfee installation icon When the installation icon is provided you have to install the program referring to the Installing McAfee section Adifferent anti virus program may be provided depending on the computer model Installing McAfee For some models an Install McAfee Web Essentials icon is located on the Desktop In this case you can install the McAfee software according to the following procedures and then use the McAfee software For some models a McAfee Security Center icon IAA i is located on the Desktop since the software is already installed the installation step is not required M Double click the Install McAfee Web Essentials icon w on the Desktop DVEUCSSen tal The Chain Installer window opens and the installation begins automatically Please wait for a moment Chain Installer or Installation may take several minutes a as Please wait When the installation is complete the Chain Installer window disappears Using McAfee To use McAfee user registration is required If a user is not registered even though virus inspection is supported your PC will not be completely protected because the virus information will not be updated with the l
168. p This function backs up the initial status of the computer Backup Functions p Data Backup Complete Backup This function backs up specific This function backs up the entire folders or files drive C Using Samsung Recovery Solution Not only can you use Samsung Recovery Solution when Windows is running but also when you are unable to boot up into Windows Let s learn how to use Samsung Recovery Solution Initial Status Backup lf you turn your computer on for the first time the Initial Status Backup function is performed after registering Windows This function saves an image of the Initial Status of the C drive to a secure location so that users can restore the computer to the Initial Status using the Complete Restore function An Initial Status Backup is only performed once immediately after the computer is purchased 1 If you turn the power on for the first time the Register Windows screen appears If you register Windows according to the instructions on the screen the computer will be restarted 2 When the computer has been restarted the User Registration Complete message appears Click OK The computer will restart 3 The Initial Status Backup screen appears To resize the C and D drives click Advanced and partition the disk accordingly Adjust the partition size using the slide bar and then click Next computer is turned on for the first time and will not be w The partition disk function is only
169. ppear during the Media completing the Configuration Wizard Center setup In addition if the computer is not connected to the Internet you cannot setup and use the TV Guide Channel Information 5 When the Media Center setup is complete click Finish Now you can use the Media Center You Are Done Using Media Center The descriptions of the Media Center start screen and basic functions will be given below Before You Start If you selected Run Setup Later in the Media Center start screen or did not complete the Setup Wizard the Setup Wizard screen appears when launching Media Center If you complete the setup the Media Center start screen appears Click Start gt Windows Media Center or Start gt All Programs gt Windows Media Center Move to the Media Center Start Screen Move to the Exit Media Previous Screen Center Resize Pictures Videos picture library play all video Jit s kos t lt 1 r ee i TE spi 4 7B wi USIC Move to the Next Menu Item Play Control Buttons 70 Pictures Videos You can view pictures images and video files Music You can listen to music files audio CDs and the radio TV Movies You can watch and record TV programs and play DVD titles Online Media You can access all kinds of multimedia content over the Tasks You can change the Media Center settings Navigation Arrow If you move the mouse pointer over the arrow you ca
170. r from the actual TV program depending on programming changes by the EPG provider or broadcast station The contents of this manual are subject to change for product improvement purposes Note Connecting and Setting Up Media Center The basic usage of Media Center for Microsoft Windows Vista Home Premium is described below Before You Start This manual will describe procedures assuming that you are using Media Center with a mouse Connecting Devices gt Connecting to the Internet To view the TV Guide or to move to Media Center sites in Media Center you have to connect to the Internet Connect the network LAN cable to the LAN port of the computer tv If the computer is not connected to the Internet you cannot use the TV Guide Channel Information and Caution _ the Online Spotlight functions gt Connecting the TV antenna To use the Media Center TV function you have to connect the TV antenna to the TV tuner card lf your computer has a built in TV tuner card connect the TV antenna cable to the TV Antenna Input port If you do not have an installed TV tuner card you cannot use the TV function Note To use the TV function purchase and install an additional TV tuner card Media Center Setup Connect all necessary devices and setup Media Center 3 If the following start screen appears select the You have to complete the settings to use Media Center installation option functions of Media
171. r run a program using this button Scroll Area Plays the role of the mouse wheel You can scroll up and down using the Scroll Area Touchpad Right Button Plays the role of the right mouse button Moving the cursor on the screen Double Click Function Place your finger on the touchpad slightly and move your Put your finger on the touchpad and quickly tap twice with finger The mouse cursor will move accordingly Move your finger on an item you want your finger in the direction you wish to move the cursor Alternatively press the left touchpad button twice quickly TapTap Click Function Right Button Function Place your finger on the touchpad and tap your finger This corresponds to clicking the right mouse button once over an item you want Press the right touchpad button once The corresponding Alternatively press the left touchpad button once pop up menu appears Bea Drag Function Touchpad On Off Function If you want to use the mouse only without using the touchpad you can turn the touchpad off To lock the touchpad function press the Fn keys Dragging refers to moving an item to another place after selecting it Press and hold down the left touchpad button over an item you want to drag and move the item to the new location You can set the touchpad and touchpad button settings in the tabs that appear when clicking Start gt Note Control Panel gt Hardware and Sound gt Mouse Holdi
172. refer to the system operation environment E p 211 of this manual and operate and store the battery at room temperature Installing Removing the Battery Shutdown the system close the LCD panel and 3 To install the battery again slide the battery into the system The battery latches move inwards and fix the battery place the computer upside down on a flat surface automatically 2 Pull the two battery latches outwards cf then remove the battery Check if the battery latch has been moved inwards Note Charging the Battery 1 Attach the battery and connect the AC adapter to the DC in jack of the computer The battery will then start charging When charging is complete the Charge LED turns green Status Charge LED Charging Red Charging complete Green AC adapter not connected Off Measuring the Remaining Battery Charge You can view the battery charge status by completing the following procedures To use the shortcut key to view Press the Fn Pes keys on the keyboard The remaining battery charge will displayed for a moment You can only view the charge status in this way when Easy Display Manager is installed on your computer To view on the battery Separate the battery and press the PUSH button inside the battery The remaining battery charge will be displayed Battery Warning a You will hear an alarm when the remaining battery charge reaches below 10 In this
173. reless device will void the authorization to use it Please contact manufacturer for service Only use drivers approved for the country in which the device will be used See the manufacturer System Restoration Kit or contact manufacturer Technical Support for additional information 26 United States of America USA and Canada Safety Requirements and Notices Do not touch or move antenna while the unit is transmitting or receiving Do not hold any component containing the radio such that the antenna is very close or touching any exposed parts of the body especially the face or eyes while transmitting Do not operate the radio or attempt to transmit data unless the antenna is connected if not the radio may be damaged Use in specific environments The use of wireless devices in hazardous locations is limited by the constraints posed by the safety directors of such environments The use of wireless devices on airplanes is governed by the Federal Aviation Administration FAA The use of wireless devices in hospitals is restricted to the limits set forth by each hospital Explosive Device Proximity Warning Do not operate a portable transmitter such as a wireless network device near unshielded blasting caps or in an explosive environment unless the device has been modified to be qualified for such use Caution Use On Aircraft Caution Regulations of the FCC and FAA prohibit airborne operation of radio frequency
174. rovided by Bluetooth devices may vary depending on their capabilities For the services provided by the Bluetooth device refer to the device manual Chapter 5 Using Applications Introducing Programs 112 CyberLink DVD Suite Optional 115 Play Camera Optional 118 Samsung Update Plus Optional 119 McAfee SecurityCenter Optional 121 Installing McAfee 121 Using McAfee 122 Using Samsung Magic Doctor Optional 125 OmniPass Fingerprint Identification software Optional 127 TPM Trusted Platform Module Optional 133 Using the TPM Function 133 Initializing the Security Platform 134 Registering a Security Platform User 137 Encrypt File System EFS Function 141 Personal Secure Drive PSD Function 142 Initializing and Reconfiguring the TPM Chip 143 Reinstalling Software 145 Introducing Programs Using the software supplied with the Samsung computer you can easily use functions and troubleshoot problems Try to use the software after learning about the basic use of the software For detailed information refer to the help section of the corresponding software Q Before You Start Every software program may not be provided depending on your computer model In addition some pictures may differ from actual product depending on the computer model and software version Fono M UpdatePlus Samsung Update Plus automatically searches downloads and installs the m al versions ams ftware and drivers for your system
175. rst page of the transmission the date and time it is sent and an identification of the business or other entity or other individual sending the message and the telephone number of the sending machine or such business other entity or individual The telephone number provided may not be any number for which charges exceed local or long distance transmission charges In order to program this information into your fax machine refer to your communications software user manual Unintentional Emitter per ICES 003 This digital apparatus does not exceed the Class B limits for radio noise emissions from digital apparatus as set out in the radio interference regulations of Industry Canada Le present appareil num rique n met pas de bruits radioelectriques depassant les limitesapplicables aux appareils num riques de Classe B prescrites dans le r glement sur le brouillage radio lectrique dict par Industrie Canada Intentional Emitter per RSS 210 Low power Radio LAN type devices radio frequency RF wireless communication devices operating in the 2 4 GHz Band may be present embedded in your notebook system This section is only applicable if these devices are present Refer to the system label to verify the presence of wireless devices Wireless devices that may be in your system are only qualified for use in Canada if an Industry Canada ID number is on the system label As a general guideline a separation of 20 cm 8
176. s i Power Options Click Start gt Control Panel gt Hardware and i Select the power plan that you want to customize and Sound gt Power Options and then Change Battery B then choose settings that reflect how you want your S etti n g S computer to manage power i Change settings that are currently unavailable Wireless Adapter Settings Sleep USB settings Power buttons and lid Power button action Sleep button action E Start menu power button PC Express Processor mower mananement GO a gt Control Panel Hardware and Sound File Edit View Tools Help Control Panel Home Li Printers La System and Maintenance Adda printer Change default printer Remove a printe Security AutoPlay Network and Int t E a aco Change default settings for media or devices Play CDs o Hardware and Sound Programs Sound User Accounts and Family Adjust system volume Change system sounds Manag Safety Appearance and P Mouse Personalization Change button settings Change pointer appearance Clock Language and Region Ease of Access B Power Options Additional Options Change power saving settings Change what the power b Require a password when the computer wakes Change Classic View Click on Change Plan Settings in the currently selected power setting 4 Select a power plan and click the OK button Power Button Type Description Image after Setting POCO S EHO SE EHH ESHEETS OOS SHEE
177. s Set the AP channels further apart from each other Ex Ch1 Ch5 Ch9 Ch13 e When an AP s SSID Service Set ID option is set to Hide you cannot search for that AP on the computer We recommend unselecting the Hide option for the AP The SSID is a name used for distinguishing one wireless LAN from another wireless LAN e It is recommended using Long Preamble Preamble is a signal for data transmission synchronization Short Preamble may be supported by some types of APs but may cause compatibility problems e tis recommended using a static IP e Since static channel selection is more reliable than auto channel selection it is recommended using a static channel Q cannot connect to a computer connected to the Que the wireless Ad Hoc network operation Ad Hoc network the AP Access Point is intermittently not found A1 Check the security settings and network name of the A This problem occurs intermittently during the wireless wireless Ad Hoc network Ad Hoc network operation Even if this problem occurs the wireless Ad Hoc network operation is A2 Check the TCP IP settings of the computers working properly and is not affected Click Refresh to connected to the wireless Ad Hoc network The IP update the AP list addresses of the computers to be connected to a wireless Ad Hoc network must be set to the same sub network address have set the same IP address for both the e For example if the TCP IP setting is
178. s Hi Inserting and Ejecting a CD 50 Music 175 Burning a CD 51 Introducing Programs 112 TV Movies 179 Blu Ray Optional 52 CyberLink DVD Suite Optional 115 Multi Card Slot 54 Play Camera Optional 118 Chapter 8 Appendix PC Card Slot 57 Samsung Update Plus Optional 119 Connecting a monitor TV 58 McAfee SecurityCenter Optional 121 Connecting a Monitor 58 installing McAfee 121 jeer manae eae aa 185 Connecting a TV 59 Using McAfee 122 Optional eee Sone s ee ai onan plage OCtO 125 Samsung Recovery Solution Functions189 i R luti 191 Adjusting the Volume 65 OmniPass Fingerprint Identification Fa a a a olalan i Q amp A 196 Intel Turbo Memory Device Optional 67 software Optional 127 Display Related 196 Check before installing another TPM Trusted Platform Module Modem Related 197 operating system such as Windows XP 68 Optional 133 Wired Network LAN Related 199 Q amp A 69 Using the TPM Function 133 Wireless Network WLAN Related 200 Initializing the Security Platform 134 Game and Program Related 204 i Registering a Security Platform User 137 Bluetooth 205 Chapter 3 Using Microsoft Encrypt File System EFS Function 141 Blu Ray Optional 207 Windows Vista Personal Secure Drive PSD Function142 Other 208 Initializing and Recontiguring the Try the Microsoft Office Trial Demo ae Windows Vista 4 TPM Chip 143 Free for 60 Days Optional 209 a eel Eaa 7 Reinstalling Software 145 Product Specifications 2411 j PE Glossary 221
179. s by rating content or title 3 Allow and block specific programs amp Allow and block any programs on your computer 3 To view the Activity Report click on View Activity Report on the right of the User Controls window 4 If you click the View Activity Report the following window opens displaying a computer operating summary a DN CJON amp Parental Controls User Controls Activity Viewer v 4 Search p File Edit View Tools Help Generate Report E E Children Account Activity Da E SAMSUNG M Account Activity Summary of Computer Activity for Children from 11 20 2006 11 27 2006 m f General System Activity Reporting is On Web Browsing Top 10 Websites Visited Recent 10 Websites Blocked vw f wewye Windows Mobile Center Using Windows Mobile Center you can easily configure computer settings such as the volume the wireless network connection settings the display settings etc all at the same time Some functions may not be supported depending on the Windows Vista version Note 1 Click Start gt All Programs gt Accessories gt Windows Mobile Center Alternatively click Start gt Control Panel gt Mobile PC gt Windows Mobile Center Battery Status Settings ES Windows Mobility Center A 45 available oD F A No display No sync ty Ya a connected ey charging partnerships Volume Q Balanced C Connect display C on tro
180. saved on the TPM chip and reconfigure it Enter the user password in the Load window for information saved on the TPM chip is deleted Ki When initializing a TPM chip all authentication Security Platform user authentication and click the OK button Before initialization decrypt all encrypted files If you do not decrypt the files you will not be able to access the encrypted files after initialization 3 Select Start gt My Computer or Start gt Computer Then you can confirm that a Personal Secure Drive Initializing a TPM Chip has been created File Edit View Favorites Tools Help 1 Prior to initialization delete the specified folder according to the following procedures gt D O Search Folders E ress Z My Computer Files Stored on This Computer ana gt Windows Vista View system information ume G sedona s Documents T Add or remove programs D gt change a setting es Select the Start gt Computer gt Configuration gt Folder Other Places ile seis ee and Search Options gt View tab and then select the n Hidden files and folders option of the Hidden files and O Shared Documents G Control Panel aca fo l d e rs ite m Select Start gt Computer and double click Drive C Details Personal Secure Drive 0 A DVD CD RW Drive E Local Disk File System NTFS Free Space 47 7 MB Total Size 50 2 MB Infineon folder Double click the Program Data folder
181. search result is displayed Search Search J Ned Windows Live Messenger Download Recent Items Computer Computer Network Connect To Control Panel Control Panel Default Programs All Programs gt All Programs Help and Support Help and Support Power Menu Button You can search for files folders etc Lock Button Power Button Search LP Enables users to search for files and folders POCO SE ESET EE OEE EES EEOO EEE ESEEEEESEET OE HEESE EEE EOE SEE E SOTO TOES OEEHOE THEE ESET EE SETOSESEEESET SEES ESOS HE EESET SEES ESHEETS ESET SEES ESOT SE ESET SEES ESOS E TEESE LESOTHO SE EESET SEO SESOT ES EEESET SEO SESOE EEE EESET SEO SESOT ET EEESETS LESOTHO TEEESEH EEE SESELELEEESENE EE SESEEEEEES gt Shows storage devices such as hard disk drives CD DVD drives network drives etc Computer S In addition you can manage files and folders here Ps Enables users to configure the appearance and settings of Windows such as the Desktop Control Panel Los PP dle Ai Se window colors hardware and software settings security etc Provides on line help about functions and usage of Windows and troubleshooting You can find Help and Support Q 3 a solution to a problem by entering a keyword Click the Power button to enter Sleep mode However what the power button does changes according to the power button setting E p 88 dat i To lock the computer click this button If you lock your computer no one can
182. set Token on a removable medium e g a memory drive which is kept safely Enter the token password 6 256 characters Password Confirm Password The screen below appears when you have selected Password Reset in Step 4 The operations to be performed appear Confirm the operations and click the Next button 1 0 Select the Start Security Platform User Initialization Wizard to proceed to the next step which is User Registration and click the Finish button for registering a user amp Infineon Security Platform Initialization Wizard The wizard completed successfully Summary n fi n e 0 n Security Platform Owner created The Security Platform is now initialized and all administrative tasks are complete Security policies for the Security Platform can be configured through the Advanced Settings of the Security Platform Settings Tool not available on Windows xP Home You have configured the following Security Platform Features Automatic Backup includes Emergency Recovery Password Reset You may start the Security Platform User Initialization Wizard if you intend to use this Security Platform yourself C Run automatic backup now Registering a Security Platform User To allow a password reset select the Enable the S To enable users to use the TPM program you have to tti f Basic U p di f repeat the registration procedures for each Windows rESEUNg
183. sktop Copy amp Backup You can copy DVD CD data aia cece tet cece aaarecapess rrera eens enti ent AE AE Hi Def Suite peoe You can create burn and erase a 2 The user registration screen appears Enter your first Utility disk image as well as print a disc name last name and email address and click on label Register Now when the computer is connected to the Internet The Cyberlink Hi Def Suite main windows appears CvberLink Hi Def Suite Menu Icons Watch a Blu ray Disc movie Menu Functions Multi Card Slot Using the multi card slot you can read and write data to a SD card SDHC card MMC You can use a card as a removable disk and conveniently exchange data with digital devices such as a digital camera digital camcorder MP3 etc Before You Start A multi card slot is optional and is provided for some models only You have to additionally purchase a multi card with the necessary capacity depending on your requirements You can use a multi card just like any data storage device A copyright protection function is not supported a Since you can lose a card when moving the computer keep the card separately Supported Cards Transcend A a Transcend MultiMediaCard DD 16B 4GB 128 SD Card SDHC card MMC To Insert and Use a Memory Card 1 Insert a card into the slot according to the directions printed on the slot Example SD Card The card drive appears Click Open folder an
184. surface of the the disk while disassembling or disk assembling the computer m lake extra care because m The data may be lost when the moving the computer or an computer is turned off or reset impact on the computer when by a power failure while the it is turned on may damage the hard disk drive is operating data of the hard disk drive The data may be lost and The company is not liable for irrecoverable due to a computer any loss of any data caused by a customer s careless usage or bad environmental conditions virus infection m The data may be lost if the power is turned off while running a program Moving or causing an impact to the computer while the hard disk drive is operating may cause files to be corrupted or bad sectors on the hard disk To prevent data loss due to damage to the hard disk drive please backup your data frequently aii I Proper Posture During Computer Use Maintaining a proper posture during computer use is very important to prevent physical harm The following instructions are about maintaining a proper posture during computer use developed through human engineering Please read and follow them carefully when using the computer Otherwise the probability of RSI Repetitive Strain Injury from repeated operations may increase and serious physical harm may be caused The instructions in this manual have been prepared so that they can be applied within the coverage of general users If the
185. t Public gt Public Pictures folder If the following screen appears click Finish You can eJ view the newly added folder in the Picture Library or a auineh Wieden Cenie andede Pictures Viddes Video Library 1 Library Setup eae Select Picture Library Add folders Windows Media Center will add these folders Q When you run it for the first time the Setup Library window may appear In this case click the No Note button Select a folder with picture files Finish Cancel lt folders gt l ie s avi EEN o See Saia aie i yr Sample Pictures Public Pictures Sample Pictures 11 27 2006 15 items R If you select a picture the picture is displayed in full screen You can view another picture by using the Play Control buttons or the direction buttons on the keyboard To view pictures in a SlideShow click on Play SlideShow Alternatively select Pictures Videos gt Play All Then the pictures in the registered folder are displayed in a random order Viewing Videos The procedures to view videos registered to the library are described below Video files are saved in the Computer gt Local Disk Q C gt Users gt User Accounts gt Video Folder or Computer gt Local Disk C gt Users gt Public gt Note Public Video folder 1 Launch Media Center and select Pictures Videos 2 Select Video Library When you run it for the first time the Setup Library
186. t logged in with an administrator account you have to enter an administrator Caution password in the User Account Control window 145 gt gt Standard Installation If you select this option programs not currently installed on the computer are listed If you select this option programs are listed that need to be installed on the computer drivers Windows updates etc You can conveniently use this option when you need to install essential programs only gt Minimum Installation If you select this option you can select the programs to be installed You can conveniently use this option when you need to install an individual driver or program that is causing a problem p gt Custom Installation Installing Software If the Start Standard Installation window appears 2 click the Yes button The drivers and programs which were installed in the computer when you purchased the computer are installed again As an example the installation procedures for the Standard Installation options are described below Note The Software installations was completed window Select Standard Installation in the System appears Software Media main screen If you click Yes the computer is restarted fe System Software Media System Software Media What is SYSTEM SOFTWARE MEDIA SYSTEM SOFTWARE MEDIA is a CD DVD that is provided by Samsung Computers to enable the easy re installation of drivers and software in case of syste
187. tact a doctor immediately Use only authorized parts multi plug battery and memory and never disassemble parts There is a danger of damaging the product electric shock or fire hazard 11 Shut down the computer and disconnect all cables before disassembling the computer If there is a modem disconnect the phone line If you are disassembling notebook computer make sure to remove the battery Failing to do so may cause electric shock Custody and Movement Related Follow the instructions for the relevant location e g airplane hospital etc when using a wireless communication device wireless LAN Bluetooth etc When carrying the notebook computer with other items such as the adapter mouse books etc take care not to press anything against the notebook computer If a heavy object is pressed against the notebook computer a white spot or stain may appear on the LCD Therefore take care not to apply any pressure to the notebook In this case place the notebook computer in a separate compartment away from the other objects 12 Caution Failing to follow instructions marked with this symbol may cause slight injury or damage to the product Installation Related Do not block the ports holes vents etc of the product and do not insert objects Damage to a component within the computer may cause electric shock or fire When using the computer with it lying on its
188. tart the registration You have to register your fingerprint and Windows user account information as follows to use the fingerprint identification and integrated password authentication Oo 5 5 D OmniPass Control Center Manage Your Passwords functions Log Off Current User Swatch User Identity Password Wizard Protect Your files Information When using the fingerprint identification sensor Help Keep your finger clean and dry when touching the sey Information Hy i Donn 5 ange your User sectings sensor Place your finger over the fingerprint sensor and 7 Current User i push gently down ae LH BDKSWX2WF9ZV hy Change Your System Settings 1 Select Start gt All Programs gt Omnipass gt Sen as Marstons Run Enrollment Wizard OmniPass Control Center Turn the computer on scnnnd Build Number and click the Start button in the Omnipass window A17910108 127 For the integrated password authentication step complete the following Enter the Windows user ID and logon password and click the Next button If you do not enter a logon password the integrated password authentication function will be permitted to anyone it is therefore recommended entering a logon password Creating a user logon password Select Start gt Control Panel gt User Accounts gt Create password for user account Enter a password in the New Password field and re enter th
189. ted Click Delete the Account in the Make changes to user s account menu A window appears asking whether you want to 5 save the desktop documents favorites music files pictures and video folders as new folders on the Desktop before deleting the account If you click Delete files the account and all files belonging to the account are deleted If you click Keep files only the account is deleted and the files belonging to the user are saved on the Desktop UserAccounts Manage Accounts gt Delete Account iew Tools Help Do you want to keep SAMSUNG M s files Before you delete SAMSUNG M s account Windows can automatically save the contents of SAMSUNG M s desktop and Documents Favorites Music Pictures and Videos folders to a new folder called SAMSUNG M on your desktop However Windows cannot save SAMSUNG M s e mail messages and other settings Delete Files Keep Files Switching User Accounts Click Start ey on the taskbar and select Switch User Windows DVD Maker Connect To ienie Sound Recorder Control Panel Log Off Default Programs Lock Restart Help and Support gt All Programs Sleep OR WE Shut Down Er T r 2 If you click on another username in the start screen you can login with that user account Changing the screen resolution and the color The resolution refers to the number of pixels displayed on the screen When increasing the resolution the items
190. temB test Open Explore If your operating system is Windows Vista the User nargo eae Ys Accounts Control window appears Click Continue Personal Secure Drive gt Send To gt Cut 3 Enter the user password to be entered when register a user for Security Platform user authentication and Properties click the OK button Infineon Security Platform User Authentication Infineon p Copyright 2003 2005 Infineon Technologies 4G Security Platform Feature needs access to a key k j a Remember password for all applications This dialog will automatically be canceled in 19 seconds Personal Secure Drive PSD Function 4 You will see the color of the encrypted folder or file PSD is a virtual space to save and manage confidential in the encrypted folder or file contents change to data You can create files and folders on a PSD as green you use a normal drive e g C drive and you can also copy data from another drive to the PSD f My Documents te Tools Help Search Folders X Pot E To use the PSD function you have to select File and sa Macs T x n folder encryption with Personal Secure Drive PSD File and Folder Tasks zx i K CJ a J pa p4 Make a new Folder Lak ell Security SPSystemB test SPEmRecT SPPwdRes In Step 5 Registering a Security Platform User z Platform Publish this Folder to the
191. tents and click the Next button The Windows automatic protection settings window appears Configure the setting according to your requirements 1 0 The time and date settings window appears Click the Next button The Registration Complete window appears If you click the Start button a computer specifications check begins 11 After a while the Windows Desktop appears 1 2 When Windows is launched install the device drivers and applications according to your requirements using the System Software Media Reinstalling when Windows does not Start When Windows does not start boot up with the System Recovery Media and from there you can reinstall Windows 1 Insert the System Recovery Media into the DVD drive and restart the computer 2 If the Press any key to boot from CD or DVD message appears while booting press any key on the keyboard Press any key to boot from CDorDVD 3 After a while the Options windows such as Language Time Keyboard etc appear Confirm the settings and click the Next button 4 Since the installation step may differ depending on the Windows Vista version continue the installation according to the following descriptions gt 4 1 If a window appears which allows you to select the operating system to install click Next Step 5 appears The operating system name may differ depending on the Windows version Note gt 4 2 If the Select Windows Installation wi
192. ter protects users from these phishing attempts If the current page is judged to be a suspicious website the Phishing Filter displays a warning message with an alarm when the Phishing Filter is enabled In addition if a page that the user is currently trying to open is registered as a known Phishing website list it displays a warning page instead Phishing Filter Settings 1 Launch Internet Explorer 2 Select Tools from the menu and click Phishing Filter gt Phishing Filter Settings eE Internet Explorer cannot display the webpage Windows Internet Explorer balaj e9 ej http go microsoft com fwlink Linkld 76277 isi A x Live Search A File Edit View Favorites BIE ww Intemet Explore Internet Exp Most likely caug e You ares e The webs e There mi What you can try Delete Browsing History ai X v dh v Page v Gi Tools v s Diagnose Connection Problems Pop up Blocker Phishing Filter Check This Website Manage Add ons Turn Off Automatic Website Checking Subscribe to this Feed oo ess le enii fades Phishing Filter Settings I Windows Update Internet Options Diagnose Connection Problems More information 3 The Internet Options window opens Locate the Phishing Filter item in the Settings field Select Turn on automatic website checking and click the OK button to use the Phishing Filter Internet Options Check for server certificate revocation Check f
193. the notification area check box Click OK 2 If the Bluetooth Device window appears click Add i Bluetooth Devices Share PIM interface Audio Dialup Devices Options COM Ports Hardware book If the Add Bluetooth Device Wizard screen appears select the My device is set up and ready to be found and click the Next button lt 3 Add Bluetooth Device Wizard Welcome to the Add Bluetooth Device Wizard Before proceeding refer to the Bluetooth section of the device documentation Then set up your device so that your computer can find it Tum it on Make it discoverable visible Give it a name optional Press the button on the bottom of the device keyboards and mice only a Add only Bluetooth devices that you trust lt Back When the search is complete all available Bluetooth devices are listed Select the Headset from the list and click the Next button oth Device Wizard Select the Bluetooth device that you want to add 63 Phones and modems a V S00 a nye a Hy New device i New d Computers workstations servers laptops PDAs E ELI E EAE O PIII GL make sure that it is tumed on Follow the setup instructions that came with the device Search Again i and then click Search Again rgan lt Back Net gt A Bluetooth device is represented by the device Y type and name Dedicat
194. the Computer On This function is applied to some models only To use the Turn the computer on function you have to register your fingerprint first and configure it as follows When finishing the settings you can turn the computer on through fingerprint identification or integrated password authentication instead of entering a password 1 2 Select Start gt All Programs or Program gt Softex gt OmniPass Control Center Select Change System Settings and then select either Enable or disable pre boot authentication or Do Not Use Authentication before Boot Select Enable System Boot Authentication and click the Next button Enter the Boot Password Setting and click the Next button Click Finish to complete the Turn the computer on function settings 129 When turning the computer on the following screen appears Place your finger over the fingerprint identification sensor and then remove it To use a booting password instead of fingerprint identification press the lt ESC gt key to display the booting password input screen Enter the booting password in the screen Then you can boot up your computer You can attempt the fingerprint identification up to three Q times If all the three attempts fail the computer will automatically shutdown In this case turn the computer on again and retry the fingerprint identification or enter the booting password Canceling the Settings Y Unselect the System Boot Authen
195. ther Certificate If there are existing certificates select one and click the Next button In this case proceed to Step 10 Click the Create button to create a certificate Confirm the certificate to use and click the Next button s Infineon Security Platform Certificate Selection 8 Infineon Security Platform User Initialization Wizard Show certificates with intended purpose Encrypting File Systen Security Platform Features Encryption Certificate Select the certificate to use from the list below Issued To Issued By Expiration Date Intended Purposes Cryptographic Provider Infineon Security Platform can enhance file and folder encryption by providing additional protection for the key used to encrypt and decrypt data For more information on Infineon Security Platform enhancements to file and folder encryption click H elp t File and folder encryption is configured to use the following Certificate View ceas ET Issued To Issued By Expiration Thumbprint sedona sedona 11 23 2015 A55E 469C559517C Private Key Cryptographic provider Click Select to select another Certificate Select Select a certificate to use and click the Select button Infineon Security Platform Certificate Selection Show certificates with intended purpose Select the certificate to use from the list below Issued To Issued By Expiration Date Intended Purposes Cryptographic Provider ee 11 23
196. tication Available option in Step 3 above and then configure it according to the instructions that appear on the screen Logging onto Windows To use the integrated password SSS SS ao authentication function In the Logon Authentication window select Master Password Authentication Enter the username and 1 If you turn the computer on after completing the the login password and click the OK button user information registration step the Logon Authentication window appears a x To use the fingerprint identification function i Logon User Authentication Master Password Authentication O In the Logon User Authentication window select AuthenTec Fingerprint Device place your finger i ig User Name over the fingerprint identification sensor and place it down slowly eae a Password asss oo x Identity i Logon User Authentication OmniPass OK w AuthenTec Fingerprint Device O esc User Name User account name i 5 Password User account password Kwa Domain Identity These fields are automatically entered Please swipe your finger on the sensor ES When the fingerprint identification or password authentication is complete you can logon to If your fingerprint is not recognized the fingerprint is Windows displayed in red in the fingerprint display window In this case place your finger over the fingerprint identific
197. time can be extended E p 161 Easy Display Manager Optional Easy Display Manager is a program that displays the changed setting on the screen when a setting is changed by pressing the shortcut keys and enables changing the display mode through the Display Settings window e Si DHONINESS Example The icon that appears when pressing the Fn t keys to change the screen brightness E Easy SpeedUP Manager Optional This program enables you to select operation mode when you need maximum system performance or low noise low power consumption with one click E p 45 OmniPass Gs Fingerprint Identification Integrated Password Authentication Optional OmniPass is fingerprint identification software You can register your fingerprint and use it by placing your finger on the fingerprint identification sensor instead of using a password You can turn the computer on login to Windows and encrypt a file all using your fingerprint E p 127 TPM Trusted Platform Module Optional The TPM Trusted Platform Module program is a security solution which manages the user authentication information that protects the information and data of users This program protects files and folders from malicious access attempts by unauthorized users E p 133 Troubleshooting Functions E SAMSUNG Magic Doctor Optional SAMSUNG Magic Doctor is troubleshooting software provided by Samsung Computer for system diagnosis
198. tings and exit Setup a Saving battery power consumption Decrease the LCD brightness when the computer is running on battery power or select Samsung Optimized in Easy Battery Manager to save battery power consumption Easy Battery Manager is optional and may not be surpported depending on your model Defective LCD Pixels An LCD panel may include less than 4 defective pixels due to a limit in the manufacturing process and this does not affect the computer performance The computer s LCD panel may have the same or similar number of defective pixels as other manufacturer s notebook computers Instructions for Cleaning the LCD Clean the LCD panel with a soft cloth lightly moistened with computer cleansing detergent moving in one direction Caution Cleaning the LCD panel with excessive force can damage the LCD Auto Brightness Control Optional For computers with an ambient light sensor the ambient light sensor detects the ambient illumination and automatically controls the LCD brightness accordingly However the ambient light sensor only works when the computer is operating on battery power gt To disable the auto brightness control You can turn the ambient light sensor on or off using the Easy ALS manager program 1 Click Start gt All Programs gt Accessories gt Windows Mobile Center Click the Turn off _ims __ button in the Easy ALS Manager field to turn the Auto Brightness control function off To turn the
199. tomatically This function is applied to some models only This function may not be supported for some Internet sites i Launch Internet Explorer and open the Hotmail site http www hotmail com Enter your user ID and password 2 Right click over the f icon in the Taskbar and click on Remember Password When the mouse pointer changes to a yellow key icon click the login window but not the Sign in button If you wait a moment the mail address and password information are retrieved 132 Sign in to your page E mail address sarmsung hotmail corn Password Forgot your password Save my e mail address and password Save my e mail address Always ask for my e mail address and password Sign in using enhanced security af Login Window 4 Enter an easy to remember name and click Finish 5 Thereafter you can login to your registered websites using your fingerprint or password When opening a registered site the Access Authentication window appears Select AuthenTec Fingerprint Device place your finger over the fingerprint identification sensor and push it down slowly once Alternatively select Integrated Password Authentication and enter the login password If the fingerprint identification or password authentication is complete your ID and password are automatically entered and you are logged into the website TPM Trusted Platform Module Optional The T
200. trol Panel 83 Safety Precautions 7 The BIOS Setup Screen 152 Opening the Control Panel 83 Proper Posture During Computer Use 18 User Accounts 85 Setting a Boot Password 154 Important Safety Information 21 Phishing Filter 90 Changing the Boot Priority 156 Replacement Parts and Accessories 23 User control function 92 Upgrading Memory 157 Regulatory Compliance Statements 25 Windows Mobile Center 94 Battery 159 WEEE SYMBOL INFORMATION 35 Installing Removing the Battery 159 Overview 36 Chapter 4 Using the Network Sea ae erste eee 150 Front View 36 easuring the Remaining Battery Status Indicators 37 Wired Network 96 ee ja Right View 38 Wireless Network 99 Extending the Battery Usage Time 161 Left View 39 Connecting to a Wireless LAN 100 Using the Security Lock Port 164 Back View 40 Using the Easy Network Manager z Bottom View 41 Optional 101 Chapter 7 Windows Media Center Turning the Computer On and Off 42 Network Settings 101 Turning the computer on 42 Using in Another Location 103 About Package Contents and the g p Turning the computer off 42 Diagnosing the Network Status 104 Program Guide 166 Connecting with a Modem Optional 105 Connecting and Setting Up Media Chapter 2 Using the Computer Bluetooth Optional 106 Center 167 Bluetooth Function 106 Connecting Devices 167 Keyboard 44 Using Bluetooth 107 Media Center Setup 168 Touchpad 47 Using Media Center 170 i i i Start S L t 170 CD Drive ODD optional 50 Chapter 5 Using Applications a o
201. tton of the optical disk drive at the side of the computer Emergency Hole Status Indicator Eject Button When the CD tray pops out insert a CD or DVD until eaid Burning a CD If your computer has a writable CD drive you can write data onto a CD or DVD or burn an audio CD CyberLink DVD Suite is supplied with the System Software Media or an additional CD so that you can burn a CD using the program Install the provided software and use the software functions referring to the software help CyberLink DVD Suite 3 Push the CD tray inward until it clicks gt AN 0 NT RN The CD drive status indicator is turned on Copy amp Backup ACD drive s reading and writing speed may N differ depending on the condition and type of the media Note a To eject a CD when the CD drive does not work or the computer is off place the end of a paper clip S into the Emergency Hole until the CD tray is ejected PhotoNow Fix your photos by enhancing colors bnghtness and contrast and removing photo red eyes in just one click Apply special photo effects and compare the results before saving CyberLink Blu Ray Optional Blu Ray is a next generation storage media that can save approximately 5 to 10 times more data than the existing DVD format You can record and play better quality HD movies than the existing SD grade DVD format Type Blu Ray DVD CD Ss COMPACT Logo ol
202. ume that your operating system is Windows Vista These illustrations are subject to change The User guide supplied with this computer may vary depending on your model Safety Precaution Notations Icon Notation Description Pe eee eccesecceseeeeerererereeeeeEeLeeEEEEEELEOLEEE EE EELELEEEEOLEOHECELEEEEEEEOLEEEL ELE LELEEEEELEOE ELLE OEEEELEOLEEEELELEOEEE EEE ELE Failing to follow instructions marked with this symbol may cause personal injury and or fatality POCO C SOTO EEO EE EHEEHHEE EEE EEE SEES EHO SSOEHEESOSEOOE SOOTHE HEESOSEOOSE EO ESOSHEESOSEHOEE ES ESOOHEE SOTHO EESEOOEHEESESEEEEEEESES Failing to follow instructions marked with this symbol may cause slight injury to yourself or damage your property Text Notations Icon Notation Description Content included in this section includes information required before using a function Content included in this section includes information required about the function Content included in this section includes helpful information to use the function POCO THEO SEES ESET SEES O CEH TEE EE SCE E EO TE ESSE THEE EEE OTEHH EES E EOE EEEETEHS EE TETOEE EEE OHESS ETS EHSEEEEEEDESE EE SESEEE EEL EDEE EEL SENOS This notation represents the page number you can refer to for information about related functions or as a Before You Start reference Start gt All This represents a menu path to runa Programs gt program Click the Start button and then select All Pro
203. upervisor Password HDD Password Clear controls access to the sot ET computer on or to enter the BIOS Setup Set HDD Password Enter Main Advanced Security Boot Exit Password on boot Disabled Fixed disk boot sector Normal Item Change Values lectMenu _ Select gt Sub Menu Setting a User Password Users can start the system with a user password but cannot enter the System Setup By doing this you can prevent other users from entering Setup Before configuring a user password a supervisor password must have been configured Deactivating the supervisor password also deactivates the user password In the Set User Password item press lt Enter gt and complete the procedures from Step 3 of Setting a Supervisor Password Setting up a Hard Disk Drive Password Optional A supervisor password must be set using the Set Supervisor Password menu If you set a password for a hard disk drive it cannot be accessed from another computer Press Enter in the Set HDD Password item and define a password as described in Step 3 of the Setting up the Supervisor Password tv The hard disk drive password setting function is not provided for some models Caution tv Changing the hard disk drive password For security purposes you can only change a hard disk drive password after restarting the computer by pressing the computer Power buiton Caution If you cannot change the hard disk drive password or the
204. usic albums and music files downloaded from the Internet 1 Launch Media Center and select Music gt Music Library You can search for a music file by selecting the 2 album artist genre or song at the top If you select Playlist gt All Music all registered music files are listed 3 Select the music files to be added to the playlist and click Add to Queue in the left pane 4 5 The mark starts blinking at the bottom left of the Media Player window and disappears the selected music files are added to the queue MUSO KO Habib Koite amp Bamada tracks 9 45 199 Ka Barra Your Work f Pre Din Din Wo Little Child Media Player Window Select the Media Player window at the bottom left and click View Queue Select Save As Playlist enter a playlist name and select Save If you have a remote control you can enter a name using the numeric buttons on the 6 remote control PLAYLIST Use your keyboard or the numeric keypad on your Save remote to enter the name of the playlist Cancel To play the saved playlist select Media Center gt Music Library gt Playlist select a playlist and click Play If a music file appears in the Media Center even after the file has been deleted If you deleted a music file you must also manually delete the file from the Media Center playlist Deleting a playlist from Media Center Select Media Center gt Music Library gt Playlist sele
205. vacy support WEP 64bit 128bit WPA This device supports the Wireless LAN Security Specifications WPA Wi Fi Protected Access for Wi Fi To connect to a WPA wireless network you have to configure the settings according to the network connection environment For detailed setting information ask your network administrator E Radio Specifications RF Band 2 4GHz 5GHz Supported Channels Channels allowed per country Device Transceiver 11a mode OFDM 11b mode DSSS 11g mode OFDM 11n mode MIMO 11a mode MAX 54Mbps 11b mode MAX 11Mbps 11g mode MAX 54Mbps 11n mode MAX 450Mbps MAX 300Mbps eecsococosooococooosooooosoocoosoocoooooosoooooooooooooooooooosoocoosoocooooocooocosoocooooooooooooooocosoocosoosooooososoooooseocoocoooooooosoocoosoocooooosooocosoocoosooooooooooooooocoooooooooooososoooooseocooooooooooosooooosoooooooocooocoooooooooooooooooooooooooooooo Antenna Type Built in Antenna The data rate may differ from the real data transmission rate 11a mode is only supported when it is connected to an IEEE802 11a device e g Access Point supporting IEEE802 11a 11g mode is supported only when you are connected to an IEEE 802 11g device e g An Access Point supporting IEEE 802 119 11n mode is only supported when it is connected to an IEEE802 11n device e g Access Point supporting IEEE802 11n The data rate in 11n mode is determined by the number of antenna and Access Point typ
206. ver Using the Battery Calibration Function When charging discharging the battery repeatedly for a short time only the battery usage time may be reduced by the difference between the actual battery charge and the remaining charge display In this case the actual battery charge and the remaining charge display will be the same by discharging the battery completely using the Battery Calibration function and then recharging it again q Disconnect the AC power adapter after turning off the computer 2 Restart your computer and press the F2 button when the Samsung logo appears to start the BIOS Setup 3 Move to the Boot gt Smart Battery Calibration item using the direction keys and press lt Enter gt PhoenixBI0S Setup Utility Main Advanced Security NumLock Enable Keypad Summary screen Boot time Diagnostic Screen PHE OPROM Brightness Mode Control Wireless Device Control Smart Battery Calibration Help Select Item Exit Select Menu Item Specific Help Select system boot loft options By NumLock Disabled Disabled Only with F12 Auto Always On Change Values Setup Defaults Select Sub Menu Save and Exit Highlight Yes in the Battery Calibration Confirmation window and press lt Enter gt The Battery Calibration function is activated and the battery is forcefully discharged To stop the operation press the Esc button This operation requires 3 5 hours depending on
207. window may appear In this case click the No Note button 3 Select a folder with video files If you select a video file the video file is played Sample Videos Public Videos Sample Videos Viewing Pictures and Videos Saved on Removable Media The procedures to view pictures images and videos saved on removable media in Media Center are described below 1 Launch Media Center Insert a removable media with picture image or 2 video files Removable media refers to a CD DVD USB flash memory memory card etc To view pictures saved on a digital camera connect the digital camera and the computer using a USB Note cable 3 After a while a window notifying you that new media has been found appears Select View Pictures or View Videos What do you want to do Take no action Play music Import pictures and videos View pictures View videos Sync to a device 4 If the file list appears select a file 5 View the picture or video In Music of Media Center you can play music files or audio CDs In addition you can rip the tracks of an audio CD onto the computer and play them later individually or by using a playlist Playing an Audio CD 1 Launch Media Center 2 Press the Eject button of the CD ROM drive to open the CD tray and insert an audio CD The tracks on the CD are played automatically Ripping an Audio CD 1 Launch Media Center 2 Insert an audio CD into the CD ROM drive an
208. wireless LAN you have to turn the wireless LAN on first by pressing the Fn J keys If the wireless LAN is turned on the Wireless LAN LED is lit Wireless LAN Connections m Wireless Ad Hoc Network Type This connects computers with wireless LAN Wireless network connections can be classified into 3 communications capability categories and this manual describes the connection Communication is enabled by constructing an Ad Hoc procedures for connecting through an AP network via one computer and connecting another computer through a wireless connection Access Point AP You can connect to the Internet or another computer on the network through an AP For more detailed connection procedures refer to the descriptions that appear when selecting Start gt Help and Support gt Table of Contents gt Networking connecting computers and devices gt Setting up a Q What is an Access Point AP network gt Setting up a computer to computer ad An AP is a network device that bridges wired and hoc network Note wireless LANs and corresponds to a wireless hub in a wired network You can connect multiple wireless LAN When you use Ad Hoc you have to change the installed computers to an AP McAfee Firewall settings E p 196 Connecting to a Wireless LAN If there is an AP you can connect to the Internet via the AP using the Wireless LAN connection method provided by Windows Vista 1 Right click over the Network Connectio
209. you are responsible for ensuring that the products are used only in the countries or regions for which they were intended and for verifying that they are configured with the correct selection of frequency and channel for the country or region of use Any deviation from permissible settings and restrictions in the country or region of use could be an infringement of local law and may be punished as such The European variant is intended for use throughout the European Economic Area However authorization for use is further restricted in particular countries or regions within countries as follows General European standards dictate maximum radiated trans mit power of 100 mW effective isotropic radiated power EIRP and the frequency range 2400 2483 5 MHz Belgium The product may be used outdoors but for outdoor trans missions over a distance of 300m or more a license from the BIPT is required This restriction should be indicated in the manual as fol lows Dans le cas d une utilisation priv e a l ext rieur d un b timent au dessus d un espace public aucun enregis trement n est n cessaire pour une distance de moins de 300m Pour une distance sup rieure a 300m un enregis trement aupr s de I IBPT est requise Pour une utilisation publique a l ext rieur de b timents une licence de I IBPT est requise Pour les enregistrements et licences veuillez contacter l IBPT France For Metropolitan departments
210. you may not connect to the network or the Internet properly In this case you have to change the settings as follows Method 1 When you need to select Allow Access in the Server or Internet Access Request window When you connect to a bank stock market or gaming website an access request window appears In this case select Allow Access in the window and click OK Then you can install the program normally or open the page i X Program Requests Internet The program requests access to the Internet You can grant grant once grant outbound only ar block access for this program McAfee does not recognize this program Details Program Location Tell McAfee about this program Grant access O Grant access once O Grant outbound only access Block access 124 Method 2 When you need to deactivate the Firewall If you cannot connect to the Internet when using a broadband Internet service you can connect to the Internal normally if you disable the McAfee Firewall However since it may cause a security problem be careful when doing so Double click the McAfee Security Center icon from the Desktop Click the Advanced menu at the bottom left and click Configure gt Internet amp Network Turn the Internet amp Network at the right to Off set the Select when to re enable firewall to Never and then click OK Click Home in the left menu pane and click Ignore next to the Firewal
211. ys f Help User Information OmniPass Current User samsung re Domain LH BDKEWX2WF9ZV Version Detail Version 5 00 17 Build Number A17910108 aA Control Panel 5 Recycle Bin samsung ral Easy Button Manager Eid Easy Network Manager McAfee Security Center aly Microsoft Office I 60 D lak Microsoft Reader fae Origami Experience fat Play AVStation a Samsung Recovery iar Samsung Update Plus samsung Note You cannot encrypt system files Encrypt WARNING Decrypt all your OmniPass encrypted files and back them Upto a removable media CO ROM USB storage device etc before performing any of the following actions uninstalling OrnniPass reformatting the hard drive removing the hard drive or reinstalling the Operating System E Do not show this warning again Right click over a folder or file to be encrypted and select OmniPass Encrypt File s from the pop up menu The selected folder or file will be encrypted Logging into Internet Sites You can easily login to frequently used Internet sites using the fingerprint identification or password authentication functions instead of entering your user ID and password As an example the procedures for logging into the Hotmail site are described below The following describes the procedures for registering your user ID and password Once the user ID and password of a site are registered you can login to the site au

Download Pdf Manuals

Related Search

Related Contents

RTHE Série R  Zebra MC50 Handheld Computer  "user manual"  fetatrack 310 fetal monitor - Ultrasound Technologies Ltd.  P8315 Manual - P3 International  取扱説明書 - yodobashi.com  Yard-Man 549 Lawn Mower User Manual  mitex FI - microSYST Systemelectronic GmbH  Installations- und Bedienungsanleitung - softline  Secador de Baixa Pressão ®  

Copyright © All rights reserved. Failed to retrieve file