Samsung AS18MSAX คู่มือการใช้งาน
Contents
1. Fan Speed 5 To control the airflow direction refer to page 20 Selecting Good Morning Mode Set Temp Set Temp rn gt C C cap Set f Ra P Y Set Temp Ou Auto L c m gus Tu ey TET Good Morning mode helps users to fall asleep well after going to bed whether being too hot to sleep The Good Morning mode can be selected only when the air conditioner is switched on or off in cool mode 1 Pressthe On Off button Result The operation indicator on the indoor unit lights up The air conditioner starts up in cool mode with turbo fan speed The indoor unit beeps 2 Press the button to select cool mode Result The indoor unit beeps each time you press the button The air conditioner runs in cool or heat mode 3 Press the 5 visite button Result z The timer indicator is displayed The Off timer is blinking on the remote control 4 Tosetthe Good Morning Off timer press the D buttons once or more times until the required Off time is displayed Result The Good Morning mode will be automatically stopped in 8 hours if the operation time is not set You can set the Off timer by pressing the buttons to turn off the Good Morning mode automatically at the appointed time within a range of 30 minutes to 12 hours Each time the lei a buttons are pressed the time is increased by 30 minutes or 1 hour Good Morning mode will be2. gt All of the manufacturing and packaging materials used for your new appliance are compatible with the environment and can be recycled gt Be sure to insert the air filter p Name of Each Part The design and shape can be changed according to the model Indoor Unit Room Temperature sensor Power On Off button I Air filter Airflow blades under the panel outlet Timer Good Morning mode Plasma Operation indicator lon mode indicator indicator _ Power On Off U Power button Fan speed Auto cleaning Turbo Set temperature amp indicator indicator indicator room temperature p _ S S S S Oger Unit Air Inlet Rear Air Outlet Connection Valve Remote Control Buttons and Display Airflow direction indicator emperature settin P 9 Operating mode indicator Auto Cool Dry Fan MPI Micro Plasma lon mode indicator Turbo function indicator Fan speed indicator Energy saving indicator Remote control transmission indicator Off Timer indicator Battery life indicator Good Morning mode indicator On Timer indicator Power On Off button Temperature adjustment buttons Mode selection button Auto Cool Dry Fan Swing button Digital On Off button Turbo button pe Auto Cleaning button Doo LIE Fan speed adjustment button Energy
3. umm USER S MANUAL AS18MSAXXTL Split type Air Conditioner Cooling DB98 27257A Contents PREPARATION m Safety etras leti beet bte 3 m Name of Each Part aite runter ciem iHe etri m Remote Control Buttons and Display m Inserting the Remote Control Batteries m Getting Started usta tton tinet labore Li ii OPERATION Selectirig Auto Mode ttis enitn scitis m Selecting Cool Mode m Selecting BeatM dde m Selecting Fan Mode m Selecting the Turbo Function m Selecting the Energy Saving Function EE m Selecting Good Morning Mode m Adjusting the Airflow Direction m Selecting Auto Cleaning Function j ai Settingithe On TIMET sace eret geen m Setting the Off TIMET s ran da hid m Operating Your Air Conditioner Without the Remote Control WSelecting MPI Micro Plasma lon neen SEENEN RECOMMENDATIONS FOR USE m Cleaning the Air Filter on Your Air Conditioner s 26 m Cleaning Deodorizing and Bio filter Option m Temperature and Humidity Ranges m Operating Recommendations m Solving Common Problems EEN 28 Register your product at www samsung com global register Safety Precautions The following safety precautions are provided to protect the users safety and prevent property damage Make sure to read the followings and use the air conditioner properly V Keep
4. Explanation Solution Check if power is on and operate the air conditioner again Check if the circuit breaker is switched off Check if Off Timer is set The temperature is not adjusted Check if you selected the Fan mode The cool air does not come out from the air conditioner 99 69 99 Check if set temperature higher than current temperature Check if you selected the Fan mode Select the Cool Auto or Dry mode Check if the air filter is blocked by dirt Clean the air filter regularly Check if the there is cover on the outdoor unit or any obstacle Remove the cover or obstacle Check if you installed the air conditioner under direct sunlight The window or door may be opened Check if you turn on the air conditioner just now It takes about 3 minutes to cool the room Check if the drain pipe is too long The fan speed is not adjusted In Auto or Dry mode the fan speed is selected automatically The remote control does Check if the battery is discharged Replace the battery not operate Checkifthe remote control sensor is blocked Check if the air conditioner is placed near strong light The Timer is not set Set Cancel Check if you pressed the button after selecting time Odour is permeated in the room during operation Check if you use the air conditioner in smoky area or there is a smell Ventilate the room or select the Fan mode for 1 2 hours The indoor un
5. be set out separately Good on Set Cancel Morning A CO we To Cancel the On Timer Set Cancel 1 Press the button to cancel the On Timer Set Cancel If you press the button both the On Timer and the Off Timer are canceled C9 C C C Good On et Cancel Morning Setting the Off Timer You can set the Off Timer to turn off the air conditioner automatically at the appointed time within a range of 30 minutes to 24 hours 1 Press the 5 button 2 Dress CAS or buttons until the desired time is displayed to set the Off Timer You can set the time between 0 5 hour and 24 hours Set Cancel Press the 75 button to complete the setting Result The remaining time is displayed The timer indicator stops blinking The air conditioner turns off automatically at the appointed time and the Off Timer setting disappears If you would like to turn the air conditioner on after 2 hours and to operate it for 2 hours during non operation 1 Press the button Down 2 Press the cay or buttons until 2 0 Hr is displayed Set Cancel 3 Press the CD button 4 Press the button Down 5 Press the ag or buttons until 4 0 Hr is displayed Set Cancel 6 Press the button If you would like to turn on the air conditioner and then to turn off it automatically at the appointed time by using On Off Timer during operation you should set th
6. next page you will find a series of step by step procedures for each function available The illustrations in the step by step procedures use three different symbols HOLD DOWN Selecting Auto Mode You can select Auto mode if you want to cool or heat your room automatically You can adjust the temperature in this mode 1 Press the On Off button Result The operation indicator on the indoor unit lights up The air conditioner starts up in cool mode with turbo fan speed The indoor unit beeps o Mode Fan Speed O 2 Press the 6 button on the remote control until Auto is displayed Result The indoor unit beeps each time you press the button The air conditioner runs in Auto mode Set Temp Auto Ju nuto Te You can change modes at any time 4 Speea 3 Press the button to adjust the temperature until the required temperature is displayed You can set the temperature between 16 C and 30 C Result Each time you press the button The temperature adjusts by 1 C d The indoor unit beeps Auto L C The fan speed adjusts automatically SetTemp Auto Selecting Cool Mode You can select Cool mode if you want to cool your room You can adjust the temperature and the fan speed when cooling 1 Press the On Off button Result The operation indicator on the indoor unit lights up The air conditioner starts up i
7. saving button cd on Up setCancel Mornin i On Timer button 5 a SIN Good Morning button i Deem gend Timer Set Cancel button Off Down On Off Clean Mode Off Timer button lt _ C MPI Micro Plasma lon mode adjustment button Time adjustment button MPI Micro Plasma lon On Off button Digital 7 On Off button If you want to turn on or off the Display of the indoor unit during operation press the CH button on the remote control Inserting the Remote Control Batteries You must insert or replace the remote control batteries when You purchase the air conditioner The remote control does not work correctly Use two AAA LRO3 1 5V batteries Do not use old and new batteries or different kinds of batteries together Insert two batteries correctly as indicated by the and symbc 1 Remove the battery cover in the rear of the remote control by pushing it with your thumb 2 Insert two batteries respecting the polarities as indicated by the and symbols 3 Close the cover by sliding it back in place aii nc MEE Getting Started The User s Manual provides you with valuable information about your air conditioner In order to take full advantage of the air conditioner s features please read this manual carefully before using You have already seen the basic description of the unit on pages from 8 to 10 Starting with the
8. this user s manual together with the installation manual in a handy place so that you can find it whenever you need to see it after reading this manual thoroughly WARNING his indicates the possibility of serious injury or death CAUTION This indicates the possibility of serious injury or damage to environments when operated incorrectly WHEN INSTALLING gt Do not connect the ground to a gas pipe water pipe Do not install the outdoor unit where there s the risk of gt Do not install the unit in a place where it is exposed to inflammable gas leakage dropping such as on high lightning rod or telephone outer wall or outside of the earth terrace The installation must be carried out by a licensed installer or qualified personnel when installing the unit for the first time or reinstalling it gt Contact the service center if the air conditioner is under water Install the switch and circuit breaker only for air conditioner Do not pull the electric wire or touch the power plug with the wet hands gt Do not bend the electric wire If the power plug is by force or weigh down the separate wiring only for air damaged replace it by the air conditioner not to be out conditioner manufacturer or qualified of order i personnel to avoid the risk gt Use the power source with p d WARNING DuRING OPERATION gt Do not attempt to repair move modify
9. up in the appropriate mode for the room temperature 2 Toturn the air conditioner off press the On Off button again Power Even if you turned the air conditioner on with the On Off button you can control it with the remote control Selecting MPI Micro Plasma lon Mode The Micro Plasma lon mode creates strong purified zone by decomposing harmful particles the behavior of active hydrogen H and oxygen ion 0 The MPI mode can be selected whether the air conditioner is turned on or not 1 Press the pa button The air conditioner starts up in MPl Auto mode automatically The MPI mode also runs when the air conditioner is turned on By pressing the E button again the MPI mode is canceled Whenever press the SN button Auto Silence and Rapid will appear repeatedly Auto Controls the fan speed automatically Silence Purifies the indoor air with silence Rapid Purifies the indoor air quickly 2 Press the CR to select the MPI operation types d On Off Clean Mod co Nowe If MPI mode is turned on when the air conditioner runs You cannot select the MPI operation types by pressing the ie button The MPI mode runs only in Auto The MPI mode will also stop by pressing the Power button of the panel Cleaning Air Filter on Your Air Conditioner For the best use of your air conditioner you must clean it every 2 weeks regularly to remove the dust that acc
10. OSING THE UNIT gt Before throwing out the device it is necessary to pull back the battery cells and get rid of them safely for recycling gt When you need to dispose of the unit consult your dealer If pipes are removed incorrectly refrigerant may Please recycle or dispose of the packaging material for this product in an environmentally responsible reasons blow out and come into manner contact with your skin causing injury Releasing refrigerant into the atmosphere also damages the environments CAUTION WHEN INSTALLING Install the drain hose to let the water run safely and correctly gt Install the outdoor unit so as to let the discharged air out properly Avoid a place that may disturb your neighbor by noise Install the air conditioner avoiding direct sunlight or heater especially water BT I CAUTION REGARDING POWER SOURCE gt Disconnect the circuit breaker when you don t use the air conditioner for a long time to save energy y NM D gt Contact the service center or manufacturer if you want to repair the air conditioner CN Contact the service center after turning off the air conditioner if strange noise is heard burning smell or smoke blow DURING OPERATION Do not open the front grille during operation gt Do not use the air conditioner for a lon
11. air conditioner can be used If the air conditioner is used at Then High temperatures The air conditioner may stop operating for the reason of protection Low temperatures Water may leak and some malfunction may occur if the heat exchanger freezes High humidity levels Water may condense and drip from the surface of the indoor unit if you don t use the air conditioner for a long time Operation Outdoor Temperature Indoor Temperature Indoor Humidity Cooling 19 C to 54 C approx 16 C to 32 C approx 80 or less Dehumidifying 19 to 54 C approx 16 C to 32 C approx If you use the air conditioner over 32 C indoor temperature the cooling capacity may drop Operating Recommendations When you use your air conditioner it is recommended that you read the following Topic Recommendation Power failure If a power failure occurs when the air conditioner is operating the air conditioner will turn off When the power returns the air conditioner will start up again automatically Protection mechanism When the air conditioner is started immediately after being plugged in or stopped the normal operation starts up after 3 minutes for the reason of protection Solving Common Problems Before contacting the after sales service perform the following simple checks They may save you the time and expense of an unnecessary call Problem The air conditioner does not operate at all
12. cally Note You can change modes at any time FAN SPEED 3 Press the button to select the fan speed until the required setting is displayed e Low Medium Rant High Result Each time you press the C button the indoor unit beeps 4 control the airflow direction refer to page 20 Selecting the Turbo Function Mode e Fan Speed You can select the Turbo Function if you want to cool or heat your room as quickly as possible The Turbo function operates for 30 minutes with the maximum settings before returning automatically to the mode and temperature previously selected 1 Press the On Off button Result The operation indicator on the indoor unit lights up The air conditioner starts up in the mode you selected last The indoor unit beeps 2 Press the 5 button Result The temperature and fan settings are adjusted automatically The air conditioner cools or heats the room as quickly as possible After 30 minutes the air conditioner is reset automatically to the previous setting You can select the Turbo function in Auto Cool and Heat mode If you select this function in Dry or Fan mode the mode changes to Auto mode 3 Pressthe 5 button again to stop the Turbo Function before the end of the 30 minute period Result The air conditioner is reset automatically to the previous setting 4 To control the airflow direction refer to
13. e On Timer longer than the Off Timer Make sure that the air conditioner will not continue to run after On Timer setting is confirmed You can check or hange the mode and or the temperature by pressing the button or the Q button after setting the Off Timer The most recently used function is set between On and Off Timer to turn on off the air conditioner and Good Morning mode Off Timer of MPI mode cannot be set out separately If you would like to turn off the air conditioner and then to turn on it again automatically at the appointed time by using On Off Timer during non operation you should set the Off Timer longer than the On Timer 1 To Cancel the Off Timer Press the Set Cancel button to cancel the Off Timer Set Cancel If you press the button both the On Timer and the Off Timer are canceled Set Temp Auto Set Temp Auto LI auto 3b 3b a ge Set Temp Auto WI Auto LI C Good Set Cancel Morning SetTemp Auto Ju L Good on Set Cancel Morning C Cc Operating Your Air Conditioner Without the Remote Control You can operate your air conditioner directly without the remote control 1 Toturn the air conditioner on press the ON OFF switch on the right side of the indoor unit Result The Operation indicator on the indoor unit lights up The indoor unit beeps The air conditioner starts
14. g time in a closed room or in a place where there s a baby or an old person gt Avoid cold and hot air reaching to person pet or a plant directly for a long time gt Do not step on the air conditioner or put heavy object on it gt Avoid the water from getting into the air conditioner Do not drink the water from the air conditioner d CAUTION DURING OPERATION Do not use the air conditioner to maintain the machine food pet plant or cosmetics gt Do not touch the pipes connected to the air conditioner gt Do not give excessive shock to the air conditioner OTHERS EN gt Be sure that the air filter not to be exposed to direct sunlight gt The appliance is not intended for use by young children or infirm persons without supervision Young children should be supervised to ensure that they do not play with the appliance gt The maximum input power amp current is measured according to the IEC standard and the input power amp current is measured according to the ISO standard gt Turn off the air conditioner and if the fan stops to operate clean the air conditioner The surface of the heat exchanger is sharp so be careful of it when cleaning gt Do not clean the air conditioner by spraying water directly or with benzene thinner or alcohol Dispose of the packaging material in accordance with the local requirements
15. in cool mode with turbo fan speed The indoor unit beeps Fan Speed O C2 2 Press the button on the remote control until Dry is displayed Result The indoor unit beeps each time you press the button The air conditioner runs in the Dry mode Set Temp Ju lc Auto You can change modes at any time i 3 the 1 button to adjust the temperature until the required temperature is displayed Mode e t You can set the temperature between 18 C and 30 C Result Each time you press the button Set Temp The temperature adjusts by 1 C 7I The indoor unit beeps auto of The air conditioner starts dehumidifying and the fan speed adjusts automatically 4 To control the airflow direction refer to page 20 Selecting Fan Mode Mode O e Fan Speed You can select the Fan mode if you want to ventilate your room It helps to refresh the air in your room You can adjust the fan speed in this mode 1 If necessary press the 6 button Result The operation indicator on the indoor unit lights up The air conditioner starts up in Cool mode with Turbo fan speed The indoor unit beeps MODE ee 2 Press the button on the remote control until ef 4 is displayed Result The indoor unit beeps each time you press the button The air conditioner runs in the Fan mode The temperature is set automati
16. it indicator flashes Press the button to turn on the air conditioner again Switch the circuit breaker off and switch on it again Strange sound is heard from the air conditioner The sound is heard when the refrigerant gas flow is changed depending on the use of the air conditioner When you press the button noise may be heard that the air conditioner sense the airflow blade Water drops from the outdoor unit connection part Water may form due to the difference of the temperature a ELECTRONICS Contact SAMSUNG WORLD WIDE If you have any comments or questions regarding a Samsung products contact SAMSUNG customer care center Address 6th floor IFCI Tower Nehru Place New Delhi 110019 Tel 3030 8282 1800 110011 Web Site www samsung com in
17. n Note If you turn the air conditioner Then the blade Off is closed completely On set to the default position Adjusting the Airflow Direction Horizontally You can adjust airflow direction horizontally manually The inner blades with small fins move the air in the desired direction 1 Adjust the inner blades by moving them left or right Make sure do not touch the inner blades during operation It may cause injury on your fingers Selecting the Auto Cleaning Function You can select the Auto Cleaning Function if you want to sterilize the air conditioner or remove mold You can set this function even when the air conditioner is turned off 1 Press the On Off button Result The operation indicator on the indoor unit lights up The air conditioner starts up in cool mode with turbo fan speed The indoor unit beeps 2 Dress the button Result 5 indicator on the indoor unit lights up and the Auto Cleaning function is set When you turn the air conditioner off it operates the Auto Cleaning function for 30 minutes After 30 minutes the air conditioner turns off Ei If you press the 5 button when the air conditioner is turned off the air conditioner operates the Auto Cleaning Function for 30 minutes When the air conditioner is turned Mode Operating time n Auto Cool Dry 30 minutes Fan 15 minutes Off 30 minutes The Auto Cleaning indicator is displa
18. n cool mode with turbo fan speed The indoor unit beeps ech O 2 Press the o button on the remote control until Cool is displayed Result The indoor unit beeps each time you press the button The air conditioner runs in Cool mode Set Temp You can change modes at any time Ju Auto ame V Mode d t 3 the 1 button to adjust the temperature until the required temperature is displayed You can set the temperature between 16 C and 30 C Result Each time you press the button The temperature adjusts by 1 C The indoor unit beeps if the room temperature is higher than the selected temperature the air conditioner starts cooling If the room temperature reaches the set temperature the air conditioner stops cooling but the fan continues to operate Set Temp Cool E Auto CC 4 Dress the c3 button to select the fan speed until the required setting is displayed Set Temp Auto gt Low gt Medium High gt Maximum Result Each time you press the c button the indoor unit beeps Cy Fan Speed c 5 To control the airflow direction refer to page 20 Selecting Dry Mode Select Dry mode if you want to dehumidify your room You can adjust the temperature in this mode 1 Press the On Off button Result The operation indicator on the indoor unit lights up The air conditioner starts up
19. or reinstall the unit on your own Make sure that these installations are carried out by qualified personnel to avoid electric shock or fire Do not place any obstacles in front of the unit Make sure that the unit is correctly ventilated at all times Do not place clothing or other materials over it Do not insert anything between the air outlet blades because the inner fan may be damaged and could cause injury Keep children away from the unit When using a wireless remote control the distance should not be more than 7 meters from the air conditioner If applicable gt Never spill any kind of liquid into the unit Should this happen unplug or main switch off the unit and contact an authorized service center If the wireless remote control is not used for a long time remove the batteries If applicable The manufacturer declines any liability for damage resulting from modifications or errors in the electrical or hydraulic connections Do not connect the electric heater to the air conditioner or repair it with your discretion Failure to observe the installation instruction or use of the unit under conditions other than those indicated in the table Operating limit of the unit installation manual will immediately invalidate d gt Do not place any materials the unit warranty so that children cannot step on it ENGLISH d WARNING DISP
20. page 20 Selecting the Energy Saving Function You can select the Energy Saving Function to save energy when cooling The temperature range decreases in order to perform this function 1 Press the On Off button Result The operation indicator on the indoor unit lights up The air conditioner starts up in cool mode with turbo fan speed The indoor unit beeps Mode Fan Speed O 2 Press the button Result The indoor unit beeps The air conditioner runs in the Energy saving function The outer airflow blade moves up and down The airflow direction indicator is displayed automatically ch E To stop the Energy saving function press the 25 again Auto EE Set Temp You can select the Energy saving function only in Cool mode 3 Press the QIO button to adjust the temperature until the required temperature is displayed You can set the temperature between 26 C and 30 C EH Set Temp Cool E Saver Auto C Cit If you want to adjust temperature under 26 C cancel the Energy saving function before adjusting the temperature 4 Press the E select the fan speed until the required setting is displayed Auto Low gt Medium gt High Fan Speed Result Each time you press the button the indoor unit beeps T pn Ee Set Temp Cool JO E Saver Auto 3 L E wm
21. stopped at the appointed off time Set Cancel 5 Press the button Result The remaining time is displayed Note In the case of selecting Good Morning mode or adjusting the extra time for Good Morning mode you should press the 5 button within 10 seconds If you do not press the bitten within 10 seconds Good Morning mode will be ones automatically Press the button to adjust the temperature until the desired temperature is displayed You can set the temperature between 16 C and 30 C Result Each time you press the button The temperature adjusts by 1 C The indoor unit beeps __ O O In cool mode Good Morning mode keeps the skin temperature at the best during the 3 stages such as Falling Asleep Stage gt Sound Sleep Stage gt Wake Up Stage in order QD Falling Asleep Stage This stage supports the environment to quickly cool down Together with comfortable intermittent air you will be able to fall asleep quickly Sound Sleep Stage This stage helps users to take deep sleep and keep the healthy skin by controlling wavy temperature control and insensible air stream Wake Up Stage This stage supports comfortable intermittent air to the room to raise human body temperature for refreshing wake up this section will be repeated lt When the set time is over 8 hours l 1 2 3 4 5 6 7 Time hr The above temperature graph might be indicated differently from the temperature indica
22. tor of indoor unit depending on the user s location gt The recommended temperature is set between 25 C and 27 C and 26 C is the most ideal temperature for comfortable sleep gt Airflow blades left and right swing and fan speed are controlled automatically as the above 3 stages in Good Morning mode gt Set Off timer in Good Morning mode over 5 hours You feel disturbed sleep ifthe Good Morning is set too short or long because the basic off timer is set for 8 hours gt If the Good Morning mode is set less than 4 hours the operation will be stopped after the set time If the Good Morning mode is set over 5 hours it will run as Wake Up stage for the last one hour before stop Adjusting the Airflow Direction Adjust the airflow direction to circulate the air according to various needs By adjusting the airflow direction the efficiency of the air conditioner can be increased Adjusting the Airflow Direction Vertically You can adjust the airflow direction vertically The outer airflow blade moves up and down to increase the efficiency of the cooling or heating operation Set Temp 1 Press the button until the required direction is set 10 Result outer blade is adjusted vertically Leaks gt 2 Press the button again to move the blade up and down o A automatically during operation F tali On Off EP C 3 Press the button again to stop the blade moving up and dow
23. umulates on the air filter CAUTION Before cleaning your air conditioner ensure that you have switched off the breaker used for the unit 1 Open the front panel by pulling tabs on the lower right and left sides of the indoor unit 2 Detach the front panel by pulling it forwards 3 Hold the edge of the air filter under the front panel and pull to release 4 Remove all dust on the air filter with a vacuum cleaner or brush 5 When you finish insert the top of the filter into the slot and fix it to 5 tabs or3tabs of the panel 6 Clean the front panel with a damp cloth and mild detergent do NOT use benzene solvents or other chemicals 7 Reassemble the air filter and the front panel If you have not used the air conditioner for a while select the Fan mode for 3 to 4 hours to dry the inside of the air conditioner There are Deodorizing and Bio filters inside your air conditioner They remove odours and dust in your room You should clean the filters every 3 months 1 Open the upper front panel by pulling the lower right and left tabs of Deodorizing Filter the panel EE 2 Pull out the deodorizing and Bio filter 3 Wash the filters with clean water then dry them in the shade Bio Filter 4 Insert the filters in their place 5 Close the front panel Temperature and Humidity Ranges The following table indicates the temperature and humidity ranges within which the
24. yed only on the indoor unit 3 Pressthe button again to stop the Auto cleaning function before the end of the 30 minute period eo Mode Fan Speed O C5 Remote Control SetTemp Auto DigtliowOff 5 usi Control Panel G Timer AutoClean MPI Setting the On Timer You can set the On Timer to turn on the air conditioner automatically at the appointed time within a range of 30 minutes to 24 hours 1 Press the CQ button Set Temp Auto Ju dD 7 S Hi 2 Dress the CAS or buttons until the desired time is displayed to set the On Timer You can set the time between 0 5 hour and 24 hours Set Cancel SetTemp 3 Dress the lt button to complete the setting di Result The remaining time is displayed The timer indicator stops blinking The selected mode and the temperature on the display disappear after 10 seconds The air conditioner turns on automatically at the appointed time and the On Timer setting disappears 4 Press the A button until the desired mode is displayed at the top of the remote control to select the mode in advance Set Temp Auto Result The air conditioner operates in the selected mode when it is ILI turned on E The most recently used function is set between On and Off Timer 3b 2 RI to turn on off the air conditioner and Good Morning mode OnTimer of MPI mode cannot
Download Pdf Manuals
Related Search