Samsung 773DFX User Manual
Contents
1. Warning Messages If there is something wrong with the input signal a message appears on the screen or the screen goes blank although the power indicator LED is still on The message may indicate that the monitor is out of scan range or that you need to check the signal cable SAMSUNG DIGITal SyncMaster everyone s invitedrw Self Test Feature Check Environment The location and the position of the monitor may influence the quality and other features of the monitor 1 Ifthere are any woofer speakers near the monitor unplug and relocate the woofer to another room 2 Remove all electronic devices such as radios fans clocks and telephones that are within 3 feet one meter of the monitor 3 Degauss the monitor if any devices were removed from the area e Useful Tips e A monitor recreates visual signals received from the PC Therefore if there is trouble with the PC or the video card this can cause the monitor to become blank have poor coloring noise Sync Out of Range etc In this case first check the source of the problem and then contact a service center or your dealer e Judging the monitor s working condition If there is no image on the screen or an Sync Out of Range message comes up disconnect the cable from the computer while the monitor is still powered on o If there is a message coming up on the screen or if the screen goes white this means the monitor is in working condition o In2. The maximum frequency per resolution may differ from product to product For Windows ME XP 2000 oet the colors properly at the Control Panel Display Settings oet the video card by referring to the video card manual Check the following items if there is trouble with the monitor 1 Check if the power cord and the cable are properly connected to the computer 2 Check if the computer beeps more than 3 times when booting If it does request an after service for the main board of the computer 3 Checkif the scanning ratio of the video screen is set at 75Hz or 85Hz Do not exceed 60Hz when using the maximum resolution 4 f you have problems in installing the adapter video driver boot the computer in Safe Mode remove the Display Adapter at the Control Panel System Device Administrator and then reboot the computer to reinstall the adapter video driver SAMSUNG DIGITal SyncMaster everyone s invitedrw Q amp A Question How can change the frequency Frequency can be changed by reconfiguring the video card Note that video card support can vary depending on the version of the driver used Refer to the computer or the video card manual for details How can adjust the resolution Windows ME XP 2000 Set the resolution at the Control Panel Display Settings Contact the video card manufacturer for details How can set the Power Saving Windows ME XP 2000 Set the function at BIOS SETUP of fun
3. Add Delete button SAMSUNG DIGITal SyncMaster _ everyone s invitedrw Authority Information in this document is subject to change without notice 2003 Samsung Electronics Co Ltd All rights reserved Reproduction in any manner whatsoever without the written permission of Samsung Electronics Co Ltd is strictly forbidden Samsung Electronics Co Ltd shall not be liable for errors contained herein or for incidental or consequential damages in connection with the furnishing performance or use of this material Samsung is the registered trademark of Samsung Electronics Co Ltd Microsoft Windows and Windows NT are registered trademarks of Microsoft Corporation VESA DPMS and DDC are registered trademarks of Video Electronics Standard Association the ENERGY STAR name and logo are registered trademarks of the U S Environmental Protection Agency EPA As an ENERGY STAR Partner Samsung Electronics Co Ltd has determined that this product meets the ENERGY STAR guidelines for energy efficiency All other product names mentioned herein may be the trademarks or registered trademarks of their respective owners
4. button A Exit Menu J Push the button or button until the Geometry screen is displayed 45 0 0 MESE amp 3 Push the menu button Push the button or button until the V Linearity screen is displayed Push the menu button to open the V Linearity adjustment screen X Previous Menu lt 90 CO 5 Dp o IL CI O 4 Usethe button or button to adjust the vertical linearity MP Previous Menu On Screen Display OSD Menu System Menu How to adjust Follow these steps to change the language used in the menu You can choose one of ten languages English German French Italian Portuguese Spanish Swedish Russian Polish or Magyar Some OSD languages may not appear in some areas 2 Previous Menu With the menu off push the menu button Push the button or button until the Language screen is displayed 2 Previous Menu Use the button or button to select the language you would like to use 3 Push the menu Jbutton to open the Language selection screen 4 Note The language chosen affects only the language of the OSD It has no effect on any software running on the computer On Screen Display OSD Menu System Menu u Exit Menu u Previous Menu I Previous Menu How to adjust A Moire pattern can appear on your screen looking like a series of concentric circles or arcs To eliminate this pattern use the clear moire adjustments J With
5. Mississauga Ontario L5N 6R3 Tel 1 800 SAMSUNG 1 800 726 7864 Fax 905 542 1199 http www samsung ca COLOMBIA Samsung Electronics Colombia Cra 9 No 99A 02 Of 106 Bogota Colombia Tel 9 800 112 112 Fax 571 618 2068 http www samsung latin com e e mail soporte samsung latin com PANAMA Samsung Electronics Latinoamerica Z L S A Calle 50 Edificio Plaza Credicorp Planta Baja Panama Tel 507 210 1122 210 1133 Tel 800 3278 FAST http www samsung latin com a PERU Servicio Integral Samsung Av Argentina 1790 Lima1 Peru Tel 51 1 336 8686 Fax 51 1 336 8551 http www samsungperu com GERMANY TELEPLAN Rhein Main GmbH Feldstr 16 64331 Weiterstadt T 0615 1 957 1306 F 06151 957 1732 EURO 0 12 MIN 4 http www samsung de AUSTRALIA Samsung Electronics Australia Pty Ltd Customer Response Centre 7 Parkview Drive Homebush Bay NSW 2127 Tel 1300 362 603 http www samsung com au ITALY Samsung Electronics Italia S p a Via C Donat Cattin 5 20063 Cernusco s Naviglio MI Servizio Clienti 199 153 153 http www samsung italia com ESPANA Samsung Electronics Comercial Iberica S A Ciencies 55 65 Poligono Pedrosa 08908 Hospitalet de Llobregat Barcelona Tel 93 261 67 00 Fax 93 261 67 50 http samsung es SyncMaster__ United Kingdom Samsung Electronics UK Ltd Samsung House 225 Hook Rise South Surbiton S
6. calling for service check the information in this section to see if you can remedy any problems yourself If you do need assistance please call the phone number on the warranty card the phone number on the Information section or contact your dealer Symptom No images on the screen cannot turn on the monitor cannot see the On Screen Display Check List Can you see No Connection Check Signal Cable on the screen If the power is on reboot the computer to see the initial screen the login screen which can be seen Can you see Sync Out of Range on the screen There is no image on the screen Is the power indicator on the monitor blinking at 1 second intervals Have you locked the On Screen Display OSD Menu to prevent changes Solutions Is the power cord connected Check the power cord connection and properly supply Check the signal cable connection If the initial screen the login screen appears boot the computer in the applicable mode the safe mode for Windows ME XP 2000 and then change the frequency of the video card Refer to the Preset Display Modes Note If the initial screen the login screen does not appear contact a service center or your dealer You can see this message when the signal from the video card exceeds the maximum resolution and frequency that the monitor can properly handle Adjust the maximum resolution and frequency that the monitor can properly
7. of red green and blue dots The closer the dots the higher the resolution The distance between two dots of the same color is called the Dot Pitch Unit mm Vertical Frequency The screen must be redrawn several times per second in order to create and display an image for the user The frequency of this repetition per second is called Vertical Frequency or Refresh Rate Unit Hz Example If the same light repeats itself 60 times per second this is regarded as 60 Hz In this case flickering of the screen can be detected To avoid this problem there is a Flicker free Mode using a vertical frequency over 70 Hz amp Horizontal Frequency The time to scan one line connecting the right edge to the left edge of the screen horizontally is called Horizontal Cycle The inverse number of the Horizontal Cycle is called Horizontal Frequency Unit kHz Interlace and Non Interlace Methods Showing the horizontal lines of the screen from the top to the bottom in order is called the Non Interlace method while showing odd lines and then even lines in turn is called the Interlace method The Non Interlace method is used for the majority of monitors to ensure a clear image The Interlace method is the same as that used in TVs Plug amp Play This is a function that provides the best quality screen for the user by allowing the computer and the monitor to exchange information automatically This monitor follows the international standard V
8. plug from the outlet Do not touch Grounding to prevent an electric shock BA GAS SAMSUNG DIGITal everyone s invitedm Power SyncMaster When not used for extended periods of time set your PC to DPMS If using a screen saver set it to the active screen mode e f the size of your monitor is small or if the same image is present for long periods of time you may see afterimages due to damage to the fluorescent substance on the inside of the CRT Do not use a damaged or loose plug e This may cause an electric shock or fire Do not pull the plug out by the wire nor touch the plug with wet hands e This may cause an electric shock or fire Use only a properly grounded plug and recepticle e An improper ground may cause electric shock or equipment damage Do not excessively bend the plug and wire nor place heavy objects upon them which could cause damage e Failure to do so may cause an electric shock or fire Q Disconnect the plug from the outlet during storms or lightening or If it is not used for a long period of time e Failure to do so may cause an electric shock or fire Do not connect too many extension cords or plugs to an outlet e his may cause a fire SAMSUNG DIGITalD SyncMaster everyone s invitedrw Installation Do not cover the vents on the monitor cabinet e Bad ventilation may cause a breakdown or fire P
9. the button to select Yes If you don t want to reset the monitor use the button to select No X Previous Menu Note If you have selected Yes all settings listed above will be reset All other settings will remain the same 97 190810 8 This operation resets all of the data in the user memory area for the current timing signal On Screen Display OSD Menu System Menu u Exit Menu f Previous Menu MD Previous Menu Control Lock Control Lock How to adjust Display Timing The information on this screen shows Display Timing User Timing and Factory Timing J With the menu off push the menu button Push the button or button until the Display Timing screen is displayed 3 Push the menu button to open the Display Timing adjustment screen 4 Use the button to see user control mode and thedefault mode DTA You can see the frequency user control mode used by the user the polarity of the operational signals the default frequency default mode set when you buy the monitor and the resolution level OSD Lock Unlock J Push and hold in the menu button for 10 seconds or more to Lock the OSD In this case even if you click the menu J button the control screen will not be printed 4 Push and hold in the menu button for 10 seconds or more to Unlock the OSD SAMSUNG DIGITal everyone s invitedm Troubleshooting Note SyncMaster __ Before
10. the properly video card manual Have you changed the video Adjust screen image position and size card or the driver using the OSD Have you adjusted the Adjust the resolution and frequency at resolution or frequency to the the video card monitor Refer to the Preset Display Modes The screen can be unbalanced due to the cycle of the video card signals Readjust Position by referring to the OSD The screen suddenly has become unbalanced SAMSUNG DIGITal SyncMaster everyone s invitedrw Troubleshooting Symptom The screen is out of focus or OSD cannot be adjusted The screen is partially distorted LED is blinking but no images on the screen There are only 16 colors shown on the screen The screen colors have changed after changing the video card Check List Have you adjusted the resolution or frequency on the monitor Are there any magnetic products such as an adapter speaker or a high voltage wire near the monitor Is the frequency properly adjusted when checking the Display Timing on the menu Have the Windows colors been set properly Has the video card been set properly Solutions Adjust the resolution and frequency of the video card Refer to the Preset Display Modes Enter the OSD and perform a Degauss Keep the monitor away from any magnetic products Adjust the frequency properly by referring to the video card manual and the Preset Display Modes
11. the following measures Reorient or relocate the receiving antenna Increase the separation between the equipment and receiver Connect the equipment into an outlet on a circuit different from that to which the receiver is connected Consult the dealer or an experienced radio TV technician for help User Information Changes or modifications not expressly approved by the party responsible for compliancecould void the user s authority to operate the equipment If necessary consult your dealeror an experienced radio television technician for additional suggestions You may find thebooklet called How to Identify and Resolve Radio TV Interference Problems helpful This booklet was prepared by the Federal Communications Commission It is available from the U S Government Printing Office Washington DC 20402 Stock Number 004 000 00345 4 Warning User must use shielded signal interface cables to maintain FCC compliance for the product Declaration of conformity for products Marked with FCC Logo This device complies with Part 15 of the FCC Rules Operation is subject to the following two conditions 1 this device may not cause harmful interference and 2 this device must accept any interference received including interference that may cause undesired operation The party responsible for product compliance SAMSUNG ELECTRONICS CO LTD America QA Lab of Samsung 85 West Tasman Drive San Jose CA 95134 USA Tel 408 544 5124 Fax 408 54
12. the menu off push the menu button 2 Push the button or button until the Advanced screen is displayed 3 Push the menu button again and then press the or button until the H Moire screen appears Push the menu button to open the H Moire adjustment screen Z Use the button or button to adjust horizontal moir u Exit Menu X Previous Menu E Previous Menu e V Moire A Moir pattern can appear on your screen looking like a series of concentric circles or arcs To eliminate this pattern use the clear moir adjustments J With the menu off push the menu button 2 Push the button or button until the Advanced screen is displayed 3 Push the menu button again and then press the or button until the V Moire screen appears Push the menu button to open the V Moire adjustment screen 4 Use the button or button to adjust vertical moir On Screen Display OSD Menu System Menu u Exit Menu 40 0 D Ob S MIC X Previous Menu D Previous Menu e How to adjust Video Input Level Some video cards use video signals higher than 1 0V which causes the display to be very bright For those video cards use this feature to select the 1 0V Level J With the menu off push the menu button 2 Push the button or button until the Advanced screen is displayed 3 Push the menu button again and then press the or button until the Video I
13. this case check the computer for trouble SAMSUNG DIGITA SyncMaster everyone s invitedrw General Specifications Model Name SyncMaster 773DFX Type 17 43cm DynaFlat X 40 6cm viewable Deflection angle 90 Dot Pitch 0 20mm Horizontal Screen type Aluminized tri color phosphor dot trio with black matrix Anti doming invar shadow mask Multi layer coated with anti static Maximum Resolution 1280 Dots 1024 Lines Active Display Horizontal 312 4mm Vertical 234 4 mm Synchronization Horizontal 30 70 kHz Vertical 50 160 Hz Input Signal Definition Video Signal RGB Analog 0 7 Vpp positive at 75 ohms Sync Signal Separate H V sync TTL level positive or negative Display Color Unlimited Maximum Pixel Clock 110 MHz Power Supply 90 264VAC rms 60 50 Hz 3Hz Power Consumption 80W Nom Dimensions WxDxH 402 x 411 x 357mm with Stand Weight 15 5 kg Environmental considerations Operating Temperature 32 F 104 F 0 C 40 C Humidity 10 80 non condensing Storage Temperature 4 F 113 F 20 C 45 C Humidity 5 95 non condensing Plug and Play Capability This monitor can be installed on any Plug amp Play compatible system Interaction of the monitor and computer systems will provide the best operating conditions and monitor settings In most cases monitor installation will proceed automatically unless the user wishes to select alternate settings N
14. 0116 Villepinte 95950 Roissy CDG Cedex Tel 08 25 08 65 65 Fax 01 48 63 06 38 http www samsungservices com PORTUGAL SAMSUNG ELECTRONICA PORTUGUESA S A Rua M io Dioniso N 2 1 Drt 2795 140 LINDA A VELHA Tel 214 148 114 100 Fax 214 148 133 128 Free Line 800 220 120 http www samsung pt SAMSUNG DIGITalD SyncMaster __ everyone s invitedrw Service Center NETHERLANDS BELGIUM LUXEMBOURG Samsung Electronics Benelux B V Fleminglaan 12 2289 CP Rijiswijk NEDERLANDS Service and informatielijn Belgium 0800 95214 http www samsung be Netherlands 0800 2295214 http www samsung nl CHILE SONDA S A Teatinos 550 Santiago Centro Santiago Chile Fono 56 2 5605000 Fax 56 2 5605353 56 2 800200211 http www sonda com http www samsung cl MEXICO Samsung Electronics Mexico S A de C V Saturno 44 Col Nueva Industrial Vallejo Del Gustavo A Madero C P 07700 Mexico D F Tel 01 57 47 51 00 Fax 01 57 47 52 02 RFC SEM950215S98 http www samsung com mx IMPORTADO POR SAMSUNG ELECTRONICS MEXICO S A DE C V SATURNO 44 COL NVA INDUSTRIAL VALLEJO DEL GUSTAVO A MADERO C P 07700 MEXICO D F TEL 5747 5100 RFC SEM950215598 EXPORTADO POR SAMSUNG ELECTRONICS CO LTD JOONG ANG DAILY NEWS BLDG 7 SOON WHA DONG CHUNG KU C P O BOX 2775 1144 SEOUL KOREA SAMSUNG DIGITal SyncMaster __ everyone s invitedrw Terms Dot Pitch The image on a monitor is composed
15. 4 5191 Provided with this monitor is a detachable power supply cord with IEC320 style terminations It may be suitable for connection to any UL Listed personal computer with similar configuration Before making the connection make sure the voltage rating of the computer convenience outlet is the same as the monitor and that the ampere rating of the computer convenience outlet is equal to or exceeds the monitor voltage rating For 120 Volt applications use only UL Listed detachable power cord with NEMA configuration 5 15P type parallel blades plug cap For 240 Volt applications use only UL Listed Detachable power supply cord with NEMA configuration 6 15P type tandem blades plug cap SAMSUNG DIGITal SyncMaster __ everyone s invitedrw Regulatory C Compliance Notice This Class B digital apparatus meets all requirements of the Canadian Interference Causing Equipment Regulations of ICES 003 Cet appareil Num rique de classe Brespecte toutes les exigences du R glemont ICES 003 sur les quipements produisant des interf rences au Canada MPR Il Compliance This monitor complies with SWEDAC MPR II recommendations for reduced electric and magnetic fields European Notice Europe only Products with the CE Marking comply with both the EMC Directive 89 336 EEC 92 31 EEC 93 68 EEC and the Low Voltage Directive 73 23 EEC issued by the Commission of the European Community Compliance with these directives implies conformity t
16. 5 Squeeze and pull up on the release latch 6 Push the base toward the back of the monitor and on the base lift up to remove the base Note The base will align with the monitor slots in only one position On Screen Display OSD Menu System i Use this button to open the OSD and activate a highlighted menu item 23 Use these buttons to highlight and adjust items using the On Screen Display These buttons are also direct access buttons for the contrast and brightness feature 4 Use this button to Exit the active menu or the OSD On Screen Display OSD Menu System Menu u Exit Menu D Previous Menu MD Exit Menu 6 Eum I d Previous Menu How to adjust Brightness Adjust the Brightness J With the menu off push the menu button Push the button or button until the Brightness screen is displayed 3 Push the menu button to open the Brightness adjustment screen 4 Use the button to increase the brightness or button to decrease the brightness Adjust the Contrast I With the menu off push the menu button Push the button or button until the Contrast screen is displayed Push the menu button to open the Contrast adjustment screen Use the button to increase the contrast or button to decrease the contrast On Screen Display OSD Menu System Menu 4 x og u Exit Menu Previous Menu MD Exit Menu MD Previous Men
17. ESA DDC for the Plug amp Play function Resolution The number of horizontal and vertical dots used to compose the screen image is called resolution This number shows the accuracy of the display High resolution is good for performing multiple tasks as more image information can be shown on the screen Example If the resolution is 1024 X 768 this means the screen is composed of 1024 horizontal dots horizontal resolution and 768 vertical lines vertical resolution SAMSUNG DIGITal SyncMaster __ everyone s invitedrw Regulatory e FCC Information User Instructions The Federal Communications Commission Radio Frequency Interference Statement includes the following warning Note This equipment has been tested and found to comply with the limits for a Class B digital device pursuant to Part 15 of the FCC Rules These limits are designed to provide reasonable protection against harmful interference in a residential installation This equipment generates uses and can radiate radio frequency energy and if not installed and used in accordance with the instructions may cause harmful interference to radio communications However there is no guarantee that interference will not occur in a particular installation If this equipment does cause harmful interference to radio or television receptions which can be determined by turning the equipment off and on the user is encouraged to try to correct the interference by one or more of
18. FCs freons and chlorinated solvents The product must be prepared for recycling and the manufacturer is obliged to have an environmental plan which must be adhered to in each country where the company conducts its operations policy The energy requirements include a demand that the monitor after a certain period of inactivity shall reduce its power consumption to a lower level in one or more stages The length of time to reactivate the monitor shall be reasonable for the user Labelled products must meet strict environmental demands for example in respect of the reduction of electric and magnetic fields along with physical and visual ergonomics and good usability SAMSUNG DIGITal SyncMaster __ everyone s invitedrw Regulatory TCO Development Unit 1996 11 29 On the page this folder you will find a brief summary of the environmental requirements met by this product The complere environmental criteria document may be ordered from TCO Development Unit S 11494 Stockholm oweden Fax 46 8 782 92 07 E mail Internet development tco se Current information regarding TCO 95 approved and labelled products may also be obtained via the Internet using the address http www tco info com TCO 95 is a co operative project between 3 logos Environmental Requirements Brominated flame retardants are present in printed circuit boards cables wires casings and housings In turn they delay the spread of fire Up to thirty percent of the pl
19. SAMSUNG DIGITA SyncMaster everyone s invitedm LEO LC KONO DOOLELOO10001D00 GOD 00 gin 66100010 90400 de rom dk SyncMaster 773DFX pa i p ET 2 Mi a a i H H pale E j E ae v pe mi il ou Naa ki i E HT E jam LG me i es RETE 3 uoh mye epe Jr pns TA i E E alia mx LA Tw T i In E TIU Tu x o pm CO 37 HX UI Sync Master Monitor Sync Master Monitor Sync Master Monitor Sync Master Monitor Sync Master Monitor SAMSUNG DIGITal everyone s invitedm index 7 Main Page 2 Safety Instructions Notational C Power G Installation C Cleaning G Other 7 Introduction C7 Unpacking C Front CG Rear C Bottm 7 Setup C Connecting Your Monitor C Base Installation SyncMaster 2 On Screen Display 2 Troubleshooting gt Check List G Q amp A gt Self Test Feature Check 2 Specifications C General Specifications PowerSaver C Preset Timing Modes 2 Information C Service G Terms Regulatory C Natural Color Cr Authority SAMSUNG DIGITaID SyncMaster everyone s invitedrw Notational Warning Caution Failure to follow directions noted by this symbol could result in bodily harm or damage to equipment Notational Conventions Prohibited Important to read and understand at all times Do not disassemble Disconnect the
20. astic in a computer casing can consist of flame retardant substances These are related to another group of environmental toxins PCBs which are suspected to give rise to similar harm including reproductive damage in fish eating birds and mammals due to the bioaccumulative processes Flame retardants have been found in human blood and researchers fear that disturbances in foetus development may occur TCO 95 demand requires that plastic components weighing more than 25 grams must not contain organically bound chlorine and bromine Lead Lead can be found in picture tubes display screens solders and capacitors Lead damages the nervous System and in higher doses causes lead poisoning TCO 95 requirement Permits the inclusion of lead since no replacement has yet been developed Cadmium Cadmium is present in rechargeable batteries and in the colour generating layers of certain computer displays Cadmium damages the nervous system and is toxic in high doses TCO 95 requirement states that batteries may not contain more than 25 ppm parts per million of cadmium The colour generating layers of display screens must not contain any cadmium Mercury Mercury is sometimes found in batteries relays and switches Mercury damages the nervous system and is toxic in high doses TCO 95 requirement states that batteries may not contain more than 25 ppm parts per million of mercury It also demands that no mercury is present in any of the electrical or elect
21. bromine or chloride and the PCBs are suspected of giving rise to severe health effects including reproductive damage in fish eating birds and mammals due to the bio accumulative processes Flame retardants have been found in human blood and researchers fear that disturbances in foetus development may occur The relevant TCO 99 demand requires that plastic components weighing more than 25 grams must not contain flame retardants with organically bound bromine or chlorine Flame retardants are allowed in the printed circuit boards since no substitutes are available Cadmium Cadmium is present in rechargeable batteries and in the colour generating layers of certain computer displays Cadmium damages the nervous system and is toxic in high doses The relevant TCO 99 requirement states that batteries the colour generating layers of display screens and the electrical or electronics components must not contain any cadmium Mercury Mercury is sometimes found in batteries relays and switches It damages the nervous system and is toxic in high doses The relevant TCO 99 requirement states that batteries may not contain any mercury It also demands that mercury is not present in any of the electrical or electronics components associated with the labelled unit There is however one exception Mercury is for the time being permitted in the back light system of flat panel monitors as today there is no commercially available alternative TCO aims on removin
22. ction the computer or the screen saver Refer to Windows Computer Manual The monitor makes a sound when itis This is normal as some sound may be generated when the turned on metal case and the electromagnet which are installed to block any electromagnetic waves interact with each other How can clean the outer case LCD Disconnect the power cord and then clean the monitor with Panel a soft cloth using either a cleaning solution or plain water Do not leave any remains of the detergent nor scratch the case Do not allow any water to go inside the monitor SAMSUNG DIGITal SyncMaster everyone s invitedrw Self Test Feature Check Your monitor provides a self test feature that allows you to check whether your monitor is functioning properly Self Test Feature Check 1 Turn off both your computer and the monitor 2 Unplug the video cable from the back of the computer 3 Turn on the monitor If your monitor works normally the following screen appears No Connection Failure of any of the boxes to appear indicates a problem with your monitor This box also appears during normal operation if the video cable becomes disconnected or damaged 4 Turn off your monitor and reconnect the video cable then turn on both your computer and the monitor If your monitor screen remains blank after using the previous procedure check your video controller and computer system your monitor is functioning properly
23. d blinks green once as the monitor saves your adjustments 6 Power button Use this button to turn the monitor on and off Note See PowerSaver described in the manual for further information regarding power saving functions For energy conservation turn your monitor OFF when it is not needed or when leaving it unattended for long periods SAMSUNG DiGIT 7 SyncMaster _ everyone s invitedrw Rear The configuration at the back of the monitor may vary from product to product 1 Power port Connect the power cord for your monitor to the power port on the back of the monitor 2 Signal Cable Connect the signal cable to the video port on your computer video board video card or graphics card Note See Connecting Your Monitor for further information regarding cable connections SAMSUNG DIGITal everyone s invitedm Bottom f 1 Signal Cable 2 Power port 3 Tilt Swivel Base TITTEN Ee NN H SyncMaster Baa a is 1m Na 4 a GE CC CL EI eee H a a UE A miii Connect the signal cable to the video port on your computer video board video card or graphics card Connect the power cord for your monitor to the power port on the back of the monitor You can separate the base from the monitor SAMSUNG DIGIT 1 SyncMaster everyone s invitedrw Connecting Your Monitor i Kear of Computer A ear of M angpar Te Fer Hear of M arimtish Cor i
24. displayed Push the menu button to open the V Size adjustment screen 4 Use the and buttons to change the Vertical Size of the monitor s viewing area On Screen Display OSD Menu System Menu How to adjust Adjust the pincushion setting when the sides of the display are bowed in or bowed out J With the menu off push the menu button 2 Push the button or button until the Pincushion Exit Menu screen is displayed 3 Push the menu button to open the Pincushion adjustment screen 4 Use the button or button to adjust the pincushion setting u Previous Menu Adjust the trapezoid setting when the top or bottom of the display is too large or small J With the menu off push the menu button u Exit Menu 2 Push the button or button until the Geometry screen is displayed 3 Push the menu button again and then press the or button until the Trapezoid screen appears Push the menu button to open the Trapezoid adjustment screen 4 Use the button or button to adjust the trapezoid setting X Previous Menu I Previous Menu On Screen Display OSD Menu System Menu 99D Exit Menu 4 MB Om gi CI O u Previous Menu u Previous Menu u Exit Menu D Previous Menu X Previous Menu How to adjust Parallelogram Adjust the parallelogram setting when the display is leaning left or right J With the menu off push the menu button 2 Push t
25. e range of issuse environment ergonomics usability reduction of electric and magnetic fields energy consumption and electrical safety Why do we have environmentally labelled computers In many countries environmental labelling has become an established method for encouraging the adaptation of goods and services to the environment The main problem as far as computers and other electronics equipment are concerned is that environmentally harmful substances are used both in the products and during their manufacture Since it is not so far possible to satisfactorily recycle the majority of electronics equipment most of these potentially damaging substances sooner or later enter nature There are also other characteristics of a computer such as energy consumption levels that are important from the viewpoints of both the work internal and natural external environments Since all methods of electricity generation have a negative effect on the environment e g acidic and climate influencing emissions radioactive waste it is vital to save energy Electronics equipment in offices is often left running continuously and thereby consumes a lot of energy What does labelling involve The environmental demands has been developed by Svenska Naturskyddsforeningen The Swedish Society for Nature Conservation These demands impose restrictions on the presence and use of heavy metals brominated and chlorinated flame retardants CFCs freons and chlori
26. e video card manual and adjust the screen as follows Table 1 Preset Timing Modes Display Mode Horizontal Frequency Vertical Frequency Pixel Clock MHz Sync Polarity H V IBM 640 x 480 IBM 720 x 400 VESA 640 x 480 VESA 640 x 480 VESA 800 x 600 VESA 1024 x 768 kHz 31 469 31 469 37 500 43 269 53 674 68 677 Hz 59 940 70 087 75 000 85 008 85 061 84 997 Horizontal Frequency The time to scan one line connecting the right edge to the left edge of the screen horizontally is called Horizontal Cycle and the inverse 2575 28 322 31 500 36 000 56 250 94 500 number of the Horizontal Cycle is called Horizontal Frequency Unit kHz Vertical Frequency Like a fluorescent lamp the screen has to repeat the same image many times per second to display an image to the user The frequency of this repetition is called Vertical Frequency or Refresh Rate Unit Hz SAMSUNG DIGITal everyone s invitedm Service Center Samsung Computer Products Customer Service 400 Valley Road Suite 201 Mt Arlington NJ 07856 Tel 973 601 6000 1 800 SAMSUNG 1 800 726 7864 Fax 973 601 6001 http www samsungusa com monitor BRAZIL Samsung Eletronica da Amazonia Ltda R Prof Manoelito de Ornellas 303 Terro B Chacara Sto Antonio CEP 04719 040 Sao Paulo SP SAC 0800 124 421 e http www samsung com br CANADA Samsung Electronics Canada Inc 7037 Financial Drive
27. ea J With the menu off push the menu e button Push the button or button until the Zoom gt E Exit M is di O Exit Menu screen is displayed Push the menu button to open the Zoom adjustment screen Use the button to decrease the screen viewing area Use the button to enlarge the screen viewing area JA U NJ u Previous Menu On Screen Display OSD Menu System Menu How to adjust The Degauss feature will remove color impurities caused by magnetic fields You can use this function to turn on the power of the monitor or change the power saving mode to the normal mode Do not use the Degauss feature more than once within a 30 minute period J With the menu off push the menu button u Exit Menu 2 Push the button or button until the Degauss screen is displayed 3 Push the menu button to execute the degauss function The degaussing screen will appear NX Exit Menu Note The monitor may buzz momentarily the image colors may change and the image will jiggle for a few seconds These effects are normal Use the recall feature to reset these monitor settings to their original levels Position Size Pincushion Trapezoid Parallelogram Pinbalance Rotation H Moire and V Moire J With the menu off push the menu button MD Exit Menu Push the button or button until the Recall screen is displayed 3 Push the menu button to open the Recall adjustment screen Push
28. g this exception when a Mercury free alternative is available CFCs freons The relevant TCO 99 requirement states that neither CFCs nor HCFCs may be used during the manufacture and assembly of the product CFCs freons are sometimes used for washing printed circuit boards CFCs break down ozone and thereby damage the ozone layer in the stratosphere causing increased reception on earth of ultraviolet light with e g increased risks of skin cancer malignant melanoma as a consequence Lead Lead can be found in picture tubes display screens solders and capacitors Lead damages the nervous system and in higher doses causes lead poisoning The relevant TCO 99 requirement permits the inclusion of lead since no replacement has yet been developed Bio accumulative is defined as substances which accumulate within living organisms Lead Cadmium and Mercury are heavy metals which are Bio accumulative SAMSUNG DIGITal SyncMaster everyone s invitedrw Regulatory TCO 03 Ecological requirements for personal computers TCO 03 applied model only I I Congratulations The display you have just purchased carries the TCO 03 Displays label This means that your display 1s designed manufactured and tested according to some of the strictest PLAYS quality and environmental requirements in the world This DIS makes for a high performance product designed with the www tcodevelopment com user in focus that also minimizes the impact on
29. handle The monitor is in PowerSaver mode Press a key on the keyboard or move the mouse to activate the monitor and restore the image on the screen Unlock the OSD by pressing the MENU button for at least 10 seconds SAMSUNG DIGITal SyncMaster __ everyone s invitedrw Troubleshooting Symptom Check List Solutions The image on the screen is Check the monitor The signal from the video card shaking configuration to see if it is in exceeds the maximum resolution and Interlace Mode Interlace frequency of the monitor Mode Vertical frequency 43Hz 87Hz i etc Are there any magnetic Move the monitor away from anything products such as a power that can create a strong magnetic field adapter speaker or a high voltage wire near by Is the voltage stable The screen image can appear to shake or vibrate at a particular time of day due to low supply voltage The screen image can also appear to shake or vibrate if there is a problem with the video card or the computer s main board The screen shows strange Is the screen displaying only Check the signal cable connection colors or just black and one color as if looking at the white screen through a cellophane Make sure the video card is fully paper inserted in it s slot Have the screen colors Reboot the computer become strange after running a program or due to a crash between applications Has the video card been set Set the video card by referring to
30. he button or button until the Geometry screen is displayed 3 Push the menu button again and then press the or button until the Parallelogram screen appears Push the menu button to open the Parallelogram adjustment screen 4 Use the button or button to adjust the parallel setting Adjust the rotation setting when the entire display is tilted left or right J With the menu off push the menu button 2 Push the button or button until the Geometry screen is displayed 3 Push the menu button again and then press the or button until the Rotation screen appears Push the menu button to open the Rotation adjustment screen Use the button or button to adjust the rotation setting On Screen Display OSD Menu System Menu How to adjust Pinbalance Adjust the pinbalance setting when the sides of the display are bowed towards the left or right J With the menu off push the menu button D Exit Menu 2 Push the button or button until the Geometry screen is displayed 3 Push the menu button again and then press the or button until the Pinbalance screen appears Push the menu button to open the Pinbalance adjustment screen 4 Use the button or button to adjust the pinbalance setting 99D Previous Menu X Previous Menu V Linearity Adjust the linearity setting when the display image is compressed at the left right or top bottom J With the menu off push the menu e
31. mable substances near the monitor e This may cause an explosion or fire Do not try to move the monitor by pulling on the wire or the signal cable e This may cause a breakdown electric shock or a fire due to damage to the cable SAMSUNG DIG SyncMaster _ everyone s inv Other Do not move the monitor right or left by pulling only the wire or the signal cable e his may cause a breakdown electric shock or a fire due to damage to the cable Never insert anything metallic into the monitor openings e his may cause an electric shock fire or injury Keep the monitor away from any magnetic substances e his may cause discoloring or distortion of the image SAMSUNG DIGITal everyone s invitedm Unpacking Monitor and Stand 1 Some models include a stand attached Please make sure the following items are included with your monitor If any items are missing contact your dealer SyncMaster Power Cord Warranty Card Not available in all locations SAMSUNG DIGITal SyncMaster everyone s invitedrw Front 1 Exit button Use this button to Exit the active menu or the OSD 2 3 Adjust buttons These buttons allow you to highlight and adjust items in the menu 4 Menu button Use this button to open the OSD and activate a highlighted menu item 5 Power indicator This light glows green during normal operation an
32. nated solvents among other things The product must be prepared for recycling and the manufacturer is obliged to have an environmental policy which must be adhered to in each country where the company implements its operational policy The energy requirements include a demand that the computer and or display after a certain period of inactivity shall reduce its power consumption to a lower level in one or more stages The length of time to reactivate the computer shall be reasonable for the user Below you will find a brief summary of the environmental requirements met by this product The complete environmental criteria document may be ordered from SAMSUNG DIGITal SyncMaster everyone s invitedrw Regulatory TCO Development SE 114 94 Stockholm Sweden Fax 446 8 782 92 07 Email Internet development tco se Current information regarding TCO 99 approved and labelled products may also be obtained via the Internet using the address http www tco info com Environmental requirements Flame retardants Flame retardants are present in printed circuit boards cables wires casings and housings Their purpose is to prevent or at least to delay the spread of fire Up to 30 of the plastic in a computer casing can consist of flame retardant substances Most flame retardants contain bromine or chloride and those flame retardants are chemically related to another group of environmental toxins PCBs Both the flame retardants containing
33. ncluded ab Adapter for Hacintush 1 Connect the power cord for your monitor to the power port on the back of the monitor Plug the power cord for the monitor into a nearby outlet 2 Connect the signal cable to the video port on your computer video board video card or graphics card 3 If you are using a Macintosh computer connect the cable to a Macintosh adapter and set the pins on your adapter Adapter not included A PC compatible computer does not need an adapter 4 Turn on your computer and monitor If your monitor displays an image installation is complete SAMSUNG DIGITal SyncMaster __ everyone s invitedrw Base Installation Tilt Swivel Base With the built in pedestal you can tilt and or swivel the monitor for the most comfortable viewing angle Note The base 1s detachable SAMSUNG DIGITalD SyncMaster everyone s invitedrw Base Installation Attaching and Removing the Bose 1 Attaching the Base 1 Place the monitor upside down on a flat work 2 Align the tabs on the base with the corresponding surface slots on the bottom of the monitor 3 Press the base onto the monitor until the tabs 4 Push the base toward the front of the monitor until are fully engaged in the slots the release latch clicks into the locked position Do not bend the snap SAMSUNG DIGITA SyncMaster everyone s invitedrw Base Installation Attaching and Removing the Bose 2 Removing the Base
34. nput Level screen appears Push the menu button to open the Video Input Level selection screen 4 Use the button or button to select 0 7 V or 1 0 V On Screen Display OSD Menu System Menu How to adjust Color temperature 1s a measure of the warmth of the image colors The available range is between 5000 to 9300k Push the Menu button 2 Push the button or button until the Color screen 1s displayed Use the button or button to select Color1 3 Push the Menu button to open the WD Previous Menu Color1 adjustment screen 4 Adjust the color temperature as close to Color temperature 1s a measure of the warmth of the image colors The available range is between 5000 to 9300k Push the Menu button 2 Push the button or button until the Color screen 1s displayed Use the button or button to select Color2 3 Push the Menu button to open the Color2 adjustment screen u Previous Menu 4 Adjust the color temperature as close to On Screen Display OSD Menu System Menu How to adjust When you adjust the Brightness and Contrast after SRGB mode is selected sRGB mode exits 99D Previous Menu 1 Push the Menu button 2 Push the button or button until the Color screen is displayed Push the button or button to select Color1 Color2 or SRGB Follow these instructions to get a close up or a longshot view of the monitor s viewing ar
35. o the following European Norms e EN55022 1998 A1 2000 Radio Frequency Interference e EN55024 1998 Electromagnetic Immunity e EN61000 3 2 1995 A1 A2 1998 Power Line Harmonics e EN61000 3 3 1995 Voltage Fluctuations PCT Notice A946 e VCCI This is a Class B product based on the standard of the Voluntary Control Council for Interference by Information Technology Equipment VCCI If this is used near a radio or television receiver in a domestic environment it may cause radio interference Install and use the equipment according to the instruction manual SAMSUNG DIGITal SyncMaster __ everyone s invitedrw Regulatory TCO 95 Ecological requirements for personal computers TCO 95 applied model only AB general requirements AB2 Written Eco document acompanying the products Congratulations You have just purchased a TCO 95 approved and labelled product Your choice has provided you with a product developed for professional use Your purchase has also contributed to reducing the burden on the environment and to the further development of environmentally adapted electronic products Why do we have environmentally labelled monitors In many countries environmental labelling has become an established method for encouraging the adaptation of goods and services to the environment The main problem as far as monitors and other electronic equipment are concerned is that environmentally harmful substances are used both in the p
36. olved cracked or discolored e You can buy a recommended detergent at any Samsung Service Center Caution Use a recommended detergent only as other surfactants containing large amounts of alcohol solvent or other strong substances can discolor or crack the monitor or damage the coated CDT If the connector between the plug and the pin is dusty or dirty clean it properly with a dry cloth e A dirty connector can cause an electric shock or fire Q Do not set a glass of water chemicals or any small metal objects on the monitor e This may cause damage electric shock or a fire e f a foreign substance gets into the monitor disconnect the plug and then contact a service center SAMSUNG DIG SyncMaster _ everyone s inv Other Do not remove cover or back No user serviceable parts inside e his may cause an electric shock or a fire e Refer servicing to qualified service personnel If your monitor does not operate normally in particular if there are any unusual sounds or smells coming from it unplug it immediately and contact an authorized dealer or service e This may cause an electric shock or a fire Do not place any heavy objects on the monitor e This may cause an electric shock or a fire For each hour of looking at the monitor you should let your eyes rest for 5 minutes e his will reduce eye fatigue Do not use or store inflam
37. ote Design and specifications are subject to change without prior notice SAMSUNG DIGIT SyncMaster everyone s invitedrw PowerSaver This monitor has a built in power management system called PowerSaver This system saves energy by switching your monitor into a low power mode when it has not been used for a certain amount of time The monitor automatically returns to normal operation when you move the computer s mouse or press a key on the keyboard For energy conservation turn your monitor OFF when it is not needed or when leaving it unattended for long periods The PowerSaver system operates with a VESA DPMS compliant video card installed in your computer Use a software utility installed on your computer to set up this feature 8 Power off Mode EPA ENERGY Normal Operation 2000 Power Indicator Green Green Blinking Power Consumption 80W Nominal Less than 2W This monitor is EPA ENERGY STAR compliant and ENERGY2000 compliant when used with a computer equipped with VESA DPMS functionality As an ENERGY STAR Partner SAMSUNG has determined that this product meets the ENERGY STAR guidelines for energy efficiency SAMSUNG DIGITal everyone s invitedrw Preset Timing Modes SyncMaster If the signal transferred from the computer is the same as the following Preset Timing Modes the screen will be adjusted automatically However if the signal differs the screen may go blank while the power LED is on Refer to th
38. our natural environment Some of the features of the TCO 03 Display requirements Ergonomics e Good visual ergonomics and image quality in order to improve the working environment for the user and to reduce sight and strain problems Important parameters are luminance contrast resolution reflectance colour rendition and image stability Energy e Energy saving mode after a certain time beneficial both for the user and the environment e Electrical safety Emissions e Electromagnetic fields e Noise emissions Ecology e The product must be prepared for recycling and the manufacturer must have a certified environmental management system such as EMAS or ISO 14 000 e Restrictions on o chlorinated and brominated flame retardants and polymers o heavy metals such as cadmium mercury and lead The requirements included in this label have been developed by TCO Development in co operation with scientists experts users as well as manufacturers all over the world Since the end of the 1980s TCO has been involved in influencing the development of IT equipment in a more user friendly direction Our labelling system started with displays in 1992 and 1s now requested by users and IT manufacturers all over the world For more information please visit www tcodevelopment com SAMSUNG DIGITal SyncMaster everyone s invitedrw Natural Color Natural Color Software Program F rat olor Color Management System Monitor Adju
39. roducts and during their manufacture Since it has not been possible so far for the majority of electronic equipment to be recycled in a satisfactory way most of these potentially damaging substances sooner or later enter Nature There are also other characteristics of a monitor such as energy consumption levels that are important from both the working and natural environment viewpoints Since all types of conventional electricity generation have a negative effect on the environment acidic and climate influencing emissions radioactive waste etc itis vital to conserve energy Electronic equipment in offices consumes an enormous amount of energy since it is often routinely left running continuously What does labelling involve This product meets the requirements for the TCO 95 scheme which provides for international environmental labelling of monitors The labelling scheme was developed as a joint effort by the TCO The Swedish Confederation of Professional Employees Naturskyddsforeningen The Swedish Society for Nature Conservation and NUTEK The National Board for Industrial and Technical Development in Sweden The requirements cover a wide range of issues environment ergonomics usability emission of electrical and magnetic fields energy consumption and electrical and fire safety The environmental demands concern among other things restrictions on the presence and use of heavy metals brominated and chlorinated flame retardants C
40. ronics components concerned with the display unit CFCs freons CFCs freons are sometimes used for washing printed circuit boards and in the manufacturing of expanded foam for packaging CFCs break down ozone and thereby damage the ozone layer in the stratosphere causing increased reception on Earth of ultraviolet light with consequent increased risks of skin cancer malignant melanoma The relevant TCO 95 requirement Neither CFCs nor HCFCs may be used during the manufacturing of the product or its packaging SAMSUNG DIGITal SyncMaster __ everyone s invitedrw Regulatory TCO 99 Ecological requirements for personal computers TCO 99 applied model only Congratulations You have just purchased a TCO 99 approved and labelled product Your choice has provided you with a product developed for professional use Your purchase has also contributed to reducing the burden on the environment and also to the further development of environmentally adapted electronics products This product meets the requirements for the TCO 99 scheme which provides for an international environmental and quality labelling labelling of personal computers The labelling scheme was developed as a joint effort by the TCO The Swedish Confederation of Professional Employees Svenska Naturskyddsforeningen The Swedish Society for Nature Conservation Statens Energimyndighet The Swedish National Energy Administration and SEMKO AB The requirements cover a wid
41. stment er NaturalColor Color Management System One of the recent problems in using a computer is that the color of the images printed out by a printer or other images scanned by a scanner or a digital camera are not the same as those shown on the monitor The Natural Color S W is the very solution for this problem It is a color administration system developed by Samsung Electronics in association with Korea Electronics amp Telecommunications Research Institute ETRI This system is available only for Samsung monitors and makes the color of the images on the monitor the same as the printed or scanned images For more information refer to Help F1 in the software program How to install the Natural Color software Insert the CD included with the Samsung monitor into the CD ROM Drive Then the initial screen of the program installation will be executed Click Natural Color on the initial screen to install the Natural Color software To install the program manually insert the CD included with the Samsung monitor into the CD ROM Drive click the Start button of Windows and then select Execute Enter D color eng setup exe and then press the key If the drive where the CD is inserted is not D enter the applicable drive How to delete the Natural Color software program Select Setting Control Panel on the Start menu and then double click Add Delete a program Select Natural Color from the list and then click the
42. u How to adjust Follow these instructions to change the Position of the monitor s entire display 1 2 3 4 With the menu off push the menu e button Push the button or button until the H Position screen is displayed Push the menu button to open the H Position adjustment screen Use the and buttons to change the Horizontal position of the monitor s viewing area Follow these instructions to change the Position of the monitor s entire display 1 2 3 4 With the menu off push the menu e button Push the button or button until the V Position screen is displayed Push the menu e button to open the V Position adjustment screen Use the and buttons to change the vertical position of the monitor s viewing area On Screen Display OSD Menu System Menu X Exit Menu X Previous Menu ID Exit Menu u Previous Menu How to adjust Follow these instructions to change the Size of the monitor s entire display J With the menu off push the menu button Push the button or button until the H Size screen is displayed Use the and buttons to change the Horizontal 3j Push the menu e button to open the H Size adjustment screen 4 Size of the monitor s viewing area Follow these instructions to change the Size of the monitor s entire display J With the menu off push the menu button 2 Push the button or button until the V Size screen is
43. urrey KT6 7LD Tel 0208 391 0168 Fax 0208 397 9949 lt European Service Center amp National Service gt Stafford Park 12 Telford Shropshire TF3 3BJ Tel 0870 242 0303 Fax 01952 292 033 http samsungservice co uk THAILAND HAI SAMSUNG SERVICE CENTER MPA COMPLEX BUILDING 1st 2nd Floor 175 SOI SUEKSA VIDHAYA SATHON SOI 12 SILOM ROAD SILOM BANGRAK BANGKOK 10500 TEL 0 2635 2567 FAX 0 2635 2556 http www samsungelectronics co th SOUTH AFRICA Samsung Electronics 5 Libertas Road Somerset Office Park Bryanston Ext 16 Po Box 70006 Bryanston 2021 South Africa Tel 0027 11 549 1621 Fax 0027 11 549 1629 http www samsung co za UKRAINE SAMSUNG ELECTRONICS REPRESENTATIVE OFFICE IN UKRAINE 4 Glybochitska str Kiev Ukraine Tel 8 044 4906878 Fax 8 044 4906887 Toll free 8 800 502 0000 http www samsung com ua SWEDEN DENMARK NORWAY FINLAND Samsung Electronics AB Box 713 S 194 27 UPPLANDS VASBY SVERIGE Bes sadress Johanneslundsv en 4 Samsung support Sverige 020 46 46 46 Samsung support Danmark 8088 4646 Samsung support Norge 8001 1800 Samsung support Finland 0800 118001 Tel 46 8 590 966 00 Fax 46 8 590 966 50 http www samsung se HUNGARY Samsung Electronics Magyar Rt 1039 Budapest Lehel u 15 17 Tel 36 1453 1100 Fax 36 1 453 1101 http www samsung hu FRANCE SAMSUNG ELECTRONICS FRANCE Service Paris Nord 2 66 rue des Vanesses BP 5
44. ut your monitor in a location with low humidity and a minimum of dust e An electric shock or fire could result inside the monitor Do not drop the monitor when moving it e This may cause damage to the product or human body Place the monitor on a flat and stable surface e The monitor can cause injury by falling Q Set down the monitor carefully e t could be damaged or broken Do not place the monitor face down e he CRT surface may be damaged Do not use the monitor without the monitor stand e It could break down or cause a fire due to bad ventilation e f the monitor must be used without the supplied stand take steps to insure proper ventilation SAMSUNG DIGITalD SyncMaster _ everyone s invitedrw Cleaning When cleaning the monitor case or the surface of the CRT wipe with a slightly moistened soft fabric Do not clean Flat monitor with water Use a water diluted mild detergent N Some detergents contain significant amounts of alcohol based solvents which can damage color change or crack the monitor case The antiglare anti static surface coating on the CRT may also be affected Dilute the detergent 1 10 ratio with water before using Do not spray detergent directly on the monitor Use the recommended detergent with a smooth cloth e You can prevent the coated CRT from being damaged or the monitor cabinet from being diss
Download Pdf Manuals
Related Search