Home

Samsung SUHD 4K Curved Smart TV Series 9 (55" JS9800) User Manual(HAWK-P ENG)

1. e Wall mounted LAN Outlet Connecting to a Wired Internet Network Automatically MENU 123 gt MENU gt Network gt Network Settings AND Automatically connect to an available network 1 Set the Network Type to Wired and then press 4 2 The TV attempts to connect to an available network Once successful you will see a confirmation message Select OK If the attempt fails try again or connect manually Connecting to a Wired Internet Network Manually MENU 123 gt MENU gt Network gt Network Settings With networks that require a static IP address you will need to enter the IP address subnet mask gateway and DNS values manually to connect to the network To get these values contact your Internet Service Provider ISP e Refer to the Dynamic versus Static IP Addresses section for more information on dynamic IP and static IP addresses Set the Network Type to Wired and then press C4 2 Select Stop when the TV attempts to connect to the network Once the network connection has been interrupted select IP Settings 3 Inthe IP Settings screen set the IP setting to Enter manually enter the IP Address Subnet Mask Gateway and DNS Server values and then select OK e Use one of the following methods to enter the numerical values Set the numbers using the A and F buttons on screen Place a finger on the POINTER button and move the Samsung Smart Control The pointer on t
2. Cable Frequency Modulation Symbol Rate e Availability depends on the specific model and area 2 Select the Search When scanning has finished a channel is updated in the channel list e Analogue Channel Tuning Scans for an analogue channel 1 Select the New 2 Set the Programme Colour System Sound System Channel and Search 3 Select the Store When scanning has finished a channel is updated in the channel list Channel mode e P programme mode When tuning is complete the broadcasting stations in your area have been assigned to position numbers from PO to P99 You can select a channel by entering the position number in this mode e C aerial channel mode S or Z cable channel mode These two modes allow you to select a channel by entering the assigned number for each aerial broadcasting station or cable channel Fine Tuning the Screen MENU 123 gt MENU gt Broadcasting gt Channel Settings gt Fine Tune g Available for analogue broadcasts only Analogue pictures can become shaky and full of noise If this happens you can fine tune the signal and or reduce noise to clear up the picture 1 Select Broadcasting gt Fine Tune An adjustment bar appears on the screen 2 Make adjustments using the Samsung Smart Control until the picture clears up and then select Save or Close Select Reset to reset the Fine Tune operation Reading digital text MENU 123 gt MENU gt Broadcasting gt Channel Settin
3. MANUAL Thank you for purchasing this Samsung product To receive more complete service please register your product at www samsung com register Model Serial No Contents Quick Guides Using Smart Hub 1 Connecting to the Internet 1 Setting up Smart Hub 1 Using Smart Hub Controlling the TV with Your Voice 2 Setting up Voice Recognition 3 Controlling the TV with your voice Controlling the TV with Your Motion 4 Setting up Motion Control 5 Controlling the TV using motions Using the Samsung Smart Control 6 Operating the TV with the POINTER button 7 Setting up the Samsung Smart Control 7 Pairing the TV to the Samsung Smart Control Improving the Viewing Experience of Sports Events 8 Activating Sports Mode 8 Using the functions available in sports mode Editing Channels 9 Running the Edit Channel function 9 Rearranging or deleting channels Playing Multiple Screens Connecting Antenna and External devices Aerial Connection Connecting to the Internet 12 Establishing a Wired Internet Connection 14 Establishing a Wireless Internet Connection Troubleshooting Internet Connectivity Issues 17 Troubleshooting Wired Internet Connectivity Issues 18 Troubleshooting Wireless Internet Connectivity Issues Checking the Internet Connection Status Video Device Connection 21 HDMI Connection 22 Component Connection 23 AV Connection TV Audio through the External Speakers 24 HDMI ARC Connection 25 Digi
4. The Instant and Schedule Recording options from the Programme Info Select Enter button to display information about the current programme In the information screen select a programme that is currently airing to start recording it right away Alternatively press lt gt button and select a programme that will air in the future to record it The Schedule Recording option on a Specified Date and Time 1 Select Broadcasting gt Schedule Manager 2 Select Schedule from the Schedule Manager to bring up a pop up menu Select Schedule Recording 3 Specify the Aerial Channel Repeat Start Time and End Time options for the programme you want to record and then select OK to finish Buttons and Functions Available While Recording a Programme Press Touchpad Enter button while recording a programme The following buttons will appear as well as the recording progress bar e Information This displays detailed information about the programme being recorded A The programme information may differ depending on the broadcasting signal and may not be available at all for certain programmes e Recording Time You can select the recording time e Stop Recording Go to Live TV You can stop recording Shift viewing to live TV Managing the Schedule Recording List MENU 123 gt MENU gt Broadcasting gt Schedule Manager You can change the settings of scheduled recording sessions or cancel scheduled sessions altogether Deleting
5. While the headphone is connected the TV speakers are muted and certain Sound options are deactivated Refer to the diagram and connect the optical cable to the One Connect s DIGITAL AUDIO OUT OPTICAL connector and the device s DIGITAL AUDIO IN OPTICAL connector A The number of connectors and their names and locations may vary depending on the model Audio Output Connection A Availability depends on the specific model and area Confirm the TV model code first please before you connect any external device to TV You can check TV model code on the label of TV set back Steps of connection may vary depending on the models A The connector s name and place may vary depending on the models Refer to the diagram and connect the audio cable to One Connect s AUDIO OUT connector and the device s AUDIO IN connector Connecting to a Computer You can directly connect a computer to the TV or to the network to view the computer screen or content on the TV Connect the computer to the TV as follows Connecting via HDMI Port You can connect the computer to the TV using the HDMI cable to display the computer screen on the TV Connecting with the HDMI DVI Port You can connect a computer to the TV by connecting the computer s DVI port to the TV s HDMI port with the DVI to HDMI cable to display the computer screen on the TV Connecting via Samsung Link Quickly access the photo video and music files saved on a computer on
6. 73 Resetting All Sound Settings TV Control using your Voice 74 Using Voice Recognition Tutorial 74 Enabling Voice Recognition 77 Using Voice Recognition Interactively TV Control using Motions 78 Using the TV camera 78 Testing Ambient Illumination Using the TV Camera 79 Activating Motion Control 82 Changing the motion control screen layout Signing in with Face Recognition 84 Registering Your Face to Your Samsung Account 85 Changing your login method of face recognition 85 Signing in to a Samsung account using face recognition TV Viewing and Recording Features Digital Broadcast Information at a Glance 86 Using the Guide 87 Checking the Current Programme Info 87 Changing the Broadcast Signal 87 Digital Signal Info and Strength Recording Programmes 88 Recording Programmes 89 Buttons and Functions Available While Recording a Programme 89 Managing the Schedule Recording List 90 Viewing Recorded Programmes 93 Managing Recorded Files Setting Up a Schedule Viewing 94 Setting Up Schedule Viewing 95 Managing the Schedule Viewing List Using the Channel List Registering Removing and Editing Channels 98 Registering and Removing Channels 99 Editing Registered Channels 99 Enabling Disabling Password Protection on Channels 99 Locking Unlocking Channels Creating a Personal Favourites List 100 Registering a Channel as Favourites 101 Viewing Favourites List Channels Only Editing a Favourites List 101 Using th
7. In addition keep your mouth closed but at the same time as neutral as possible A Check the box to add password entry to the sign in process using Facial Recognition for additional security Select Try Again to try again 4 On the Samsung Account information screen select Save This completes the face registration process Changing your login method of face recognition MENU 123 gt MENU gt Smart Hub gt Samsung Account gt Edit profile You can change the log in method to face recognition To change the log in method follow these steps 7 Enter your password and then select Done 2 On the Edit Profile screen select Sign in Method In the drop down list that appears select Face Recognition 3 Select Done Signing in to a Samsung account using face recognition MENU 123 gt MENU gt Smart Hub gt Samsung Account gt Edit profile To log in using Face Recognition follow these steps 1 Select your Samsung account 2 f you have set the Samsung account sign in option to Face Recognition the TV automatically recognises your face If recognition fails try again A Your entire face must be visible to the camera Avoid shadows over your face Shadows prevent the camera from recognising your face accurately A Keep your expression as neutral as possible In addition keep your mouth closed as neutral as possible A Once recognition succeeds the TV logs in to Smart Hub automatically If the TV recognises two or
8. MENU 123 gt MENU gt Picture gt 3D gt 3D Mode 7 Launch 3D and then select 3D Mode under Picture gt 3D 2 Choose from the 3D modes that appear on the screen Supported 3D Mode may vary depending on the 3D content 3D Mode is automatically configured for most 3D content The following 3D Mode is available However mode availability may vary depending on the 3D content s format A The supported resolutions vary for each mode Refer to the Supported Resolutions for each 3D Mode section for more information e Off Deactivates 3D viewing e 2D 3D Converts normal images to 3D images A Some formats do not support this mode Adjusting the 3D Effect MENU 123 gt MENU gt Picture gt 3D Configure the viewpoint depth and other 3D settings for a custom viewing experience e Adjusting the 3D perspective Select Picture gt 3D gt 3D Perspective Use the adjustment bar shown on the screen to adjust the perspective e Adjusting the 3D Depth Select Picture gt 3D gt 3D Depth Use the adjustment bar shown on the screen to adjust the depth A This option cannot be used if 3D mode is set to aa L R or H T B e Reversing the Left Right 3D Images Select Picture gt 3D gt L R Change This option is used to reverse the left and right images ED D e Displaying 3D Content in 2D Select Picture gt 3D gt 3D 2D This option is used to enable 2D viewing of 3D content A This function i
9. Select the Favourites lists you want and then select OK amp z 7 Youcan select more than one Favourites list Select OK again The TV has added the current channel to the Favourites list s that you selected Registering Multiple Channels as Favourites It s possible to register multiple channels as favourites at the same time 1 2 Select Broadcasting gt Edit Favourites Select Category from the bottom of the screen to change the channel list to the one containing that channels you want to register A Recently Viewed and Most Viewed are only available if they contain channels Select the channels from the list in the middle of the screen Select Change Fav and then change the Favourites 1 to the Favourites 5 you want to use Select Add Viewing Favourites List Channels Only It s possible to flip through Favourites list channels using only the channel up down buttons x SG N gt A Favourites list can only be selected if it contains at least one favourites channel Run Channel List Broadcasting gt Channel List Press gt button to select Favourites 1 through Favourites 5 Choose a channel from the selected Favourites list This changes the channels and Channel List changes to the selected Favourites channel Editing a Favourites List MENU 123 gt MENU gt Broadcasting gt Edit Favourites You can rename and edit Favourites lists Using the Edit Favourites screen menu items Select O
10. try again This test is designed to measure the volume and clarity of your voice 4 Measure the volume and clarity of your voice Say Hi TV and then say the command on the TV s screen loudly and clearly within 30 seconds If the TV successfully recognises your voice the test continues to the next step If this part of the test fails try again Checking ambient noise and illumination Voice and motion recognition environment Check MENU 123 gt MENU gt Support gt Self Diagnosis gt Voice amp Motion Control Environment Check You can test the ambient noise and brightness levels affecting the TV camera and microphone to ensure that they are suitable for voice and motion recognition use Using Voice Recognition Interactively Availability depends on the specific model and area Voice recognition allows you to set up access VODs search and launch applications and execute various other commands using voice commands and without having to remember specific commands or keywords Saying Set the sleep timer for 30 minutes for example instructs the TV to turn off after 30 minutes Sleep Timer Activate voice recognition and say a command See the examples below e When you don t know which channel a specific programme is on Watch Title Play Title Run Title e When you want to find a specific programme or content item xxx Title e When you want to know various daily information What s
11. 3D screen for flaws or faults If the test fails to identify a problem there may be a problem with an external device or the signal strength A If the test picture does not appear or there is noise or distortion the TV may have a problem Contact Samsung s Call Centre for assistance G If the test picture is displayed properly there may be a problem with the external device Please check the connections If the problem persists check the signal strength or refer to the external device s user manual The Problem The 3D glasses are not working correctly can t see 3D images clearly The batteries in the 3D glasses are flat Try this Make sure the glasses are powered on The 3D feature may not work properly if there is another 3D product or an electronic device running nearby If there is a problem keep other electronic devices as far away as possible from the 3D Active Glasses The ideal viewing distance is three times or more the height of the screen We also recommend watching 3D content with your eyes level with the screen Turn off the 3D glasses when they are not in use If you leave the 3D glasses on the battery lifespan is shortened There is a problem with the broadcast The Problem The TV is not receiving all channels There are no captions with digital channels The picture is distorted Try this If your TV is not connected to a cable box e Confirm that the coaxial cable is securely c
12. ISP the Samsung server and the Samsung Apps panels A After completing the test if Smart Hub continues to have problems contact your Internet Service Provider or a Samsung Contact Centre Launching Smart Hub automatically MENU 123 gt MENU gt Smart Hub gt Auto Start Settings gt Smart Hub You can start Smart Hub automatically when you turn on the TV MENU 123 gt MENU gt Smart Hub gt Auto Start Settings gt Channel bound Apps amp Ticker You can select whether or not to automatically turn on the channel bound apps or ticker services The channels that support this function will provide you with additional information or services A To use this feature make sure that an app supporting the Ticker and channel bound function is installed on the TV Using the Smart Hub Tutorial MENU 123 gt MENU gt Support gt Smart Hub Tutorial From the Support menu select Smart Hub Tutorial This will familiarize yourself with the basics of Smart Hub and panels Resetting Smart Hub MENU 123 gt MENU gt Smart Hub gt Reset Smart Hub You can remove the Samsung accounts saved in the TV and everything linked to them including apps Y SS x Some of the Smart Hub services are for pay services To use a for pay service you must have an account with the service provider or a Samsung account For more information refer to Using Smart Hub with Samsung Account To use this feature the TV must be connected t
13. Samsung Smart Control If the Samsung Smart Control stops operating or works abnormally replace the batteries as this may be due to insufficient battery power If the problem persists the Samsung Smart Control restore pairing with the TV 1 Press RETURN button and EXTRA button simultaneously for 3 seconds A You must place the Samsung Smart Control approximately 30cm 40cm away from the TV and ensure it is pointing towards the remote control receiver 2 Connection image is appeared on the screen And then Samsung Smart Control is connecting to TV automatically e RETURN am EXIT Actual menu screen may differ depending on the TV model About the Samsung Smart Control Samsung Smart Control makes it even easier and more convenient to use the TV Pressing the MENU 123 button displays a virtual remote control that allows you to easily enter digits control content and activate functions on the screen We recommend using Samsung Smart Control at a distance of less than 6m Effective range may vary depending on wireless environment conditions SOURCE MENU 123 POINTER RETURN Eer PI EXTRA e SMART HUB SAMSUNG Colours and shape may vary depending on the model Button C4 AD SOURCE MENU 123 a POINTER NPY AVS gt Enter RETURN EXIT gt II EXTRA SMART HUB Description Press this button to mute the sound temporarily Press and hold this button to bring up Accessibility Sho
14. Support gt Voice Recognition Tutorial This lets you familiarize yourself with the basics of Voice Recognition From the Support menu run Voice Recognition Enabling Voice Recognition Press and hold the MENU 123 button on the Samsung Smart Control The microphone icon appears on the screen when Voice Recognition is enabled Say a command You can use voice recognition to operate the TV whin you are watching the TV or other videos A Say the command from 10cm to 15cm away from the microphone on the Samsung Smart Control Voice commands may not be recognised properly if you speak too softly or loudly The optimal volume for voice commands is between 75dB and 80dqB Learning Voice Recognition Basics e Moving the focus Say Left Right Up or Down to move the focus However these commands can only be used in situations when the focus can be moved e Selecting an item Say Select to confirm the selection e All Voice Commands Say Help to display the complete list of voice commands organised by category Say the name of a category e Deactivating Voice Recognition Say Close or press the RETURN button to terminate voice recognition TheTV recognises predefined voice commands only and the voice commands may differ from the manual depending on the version Changing Voice Recognition Language MENU 123 gt MENU gt System gt Voice Recognition gt Language Navigate to MENU 123 gt MENU gt
15. The mobile device s shared content can be viewed played on the TV A As long as File Sharing is activated unauthorised access may be allowed Disable File Sharing if data access is not required Name of TV on Network MENU 123 gt MENU gt Network gt Device Name Choose or enter a TV name to be displayed on the network 1 Select Device Name from the Network menu A list will appear 2 Choose a name from the list Alternatively select User Input to enter a name manually You can view the specified TV name on the network Input Signal Selection You can select a connected external device using the SOURCE button A Connector names may vary depending on the model The following options are available in the Source List screen e Options Select a port connected to an external device and press and hold Enter button or press the W button The following functions are available Available options for each connector may vary Edit Name Rename devices connected to the TV for easier identification of external sources For example you can designate a computer connected to the TV via an HDMI DVI cable as DVI PC Alternatively simply designate a computer connected to the TV via an HDMI cable as PC You can also designate an AV device connected to the TV via an HDMI DVI cable as DVI Devices Information View detailed information about the connected devices Anynet HDMI CEC Displays a list of Anynet HDMI CEC compli
16. a DVI to HDMI cable to connect the computer to the TV Refer to the diagram and connect the HDMI cable to the external video device s HDMI OUT connector and the One Connect s HDMI IN 1 STB connector G The number of connectors and their names and locations may vary depending on the model Once the connection has been made you will be able to select the connected external device using the SOURCE button Connecting with the HDMI to DVI Port If the graphics adapter of your computer does not support HDMI interface connect the computer to the TV with the DVI Digital Visual Interactive to HDMI cable However DVI to HDMI connection is supported by the HDMI port for DVI only and does not support audio signal transmission To listen to the computer sound connect the external speaker to the computer s audio output connector A For information on resolutions supported by the TV refer to Computer Connection Precautions Refer to the diagram and connect the DVI to HDMI cable to the One Connect s HDMI IN 2 DVI port and the computer s DVI OUT port A The number of connectors and their names and locations may vary depending on the model Once the connection has been made press the SOURCE button on virtual remote control to select the connected external device Connecting via Samsung Link Quickly access photo video and music files saved on a computer with Samsung Link software installed Also use Samsung Link to play and view the
17. a registration code appears on the screen Visit the DivX website on a computer and click Register Your Device under Support from the top menu Enter the registration code shown on the TV s screen in the Enter your registration code field Enter the TV s name in the Name your device field and then select NEXT Click DOWNLOAD and save the device_name divx file Transfer the device_name divx file from the computer onto a USB device and then plug the USB device into the TV Play the device_name divx file on the TV to register the TV as a DivX certified device Restoring the TV to the Factory Settings MENU 123 gt MENU gt Support gt Self Diagnosis gt Reset This option restores all TV settings excluding the Internet to the factory defaults 1 Select Support gt Self Diagnosis gt Reset The Security PIN entry window appears on the screen 2 Enter the Security PIN and then select Yes All settings are then reset The TV turns off and on again automatically and then displays the Setup screen A For more information on Setup refer to the user manual that came with the TV Turning the TV into a Display Model for retail stores MENU 123 gt MENU gt Support gt Use Mode AND Select Support gt Use Mode gt Store Demo This turns the TV into a display model for use in a retail environment amp Y For all other uses select Home Use A Store Demo should be used in retail environments only With St
18. bandwidth adjustments Select Reset to reset the settings A This function is not available when you are listening to audio through external speakers This function is only available when Sound Mode is set to Standard Customising Sound Sound Customiser MENU 123 gt MENU gt Sound gt Sound Customiser QAND Sound Customiser lets you calibrate the TV for optimal sound quality based on your hearing capabilities and the ambient conditions Customising Sound MENU 123 gt MENU gt Sound gt Sound Customiser gt Add Custom Sound Customise sound in a quiet environment to ensure accurate measurements 1 Select Sound gt Sound Customiser gt Add Custom Sound 2 Select Start to preview a test tone Select Next 3 A 6 step test will start During each stage select Yes when you can hear the test tone If you want to listen to it again select No Once the test is complete you can compare the original sound to the calibrated sound 4 Select Next and enter a name for the calibrated sound profile Once the settings have been saved you will be able to play TV sound that has been optimised for the user s sense of hearing and the ambient environment Using a Custom Sound Profile MENU 123 gt MENU gt Sound gt Sound Customiser gt Custom Sound Profile If there are multiple Custom Sounds simply choose the one you want to use 1 Select Sound gt Sound Customiser gt Custom Sound Profile 2 Select a Custom So
19. by the TV Check the supported resolutions of the TV and adjust the external device s output resolution accordingly You cannot select the Subtitle menu if you have selected a source connected to the TV via HDMI or Component connections To view subtitle turn on the external device s subtitle function This smell is normal and will dissipate over time Verify that the current channel is a digital channel The Signal Information is only available for digital channels Remove the base stand from the TV and reassemble it Broadcasting is only available when the Source is set to TV The Broadcasting menu cannot be accessed while watching TV using a cable box Certain Broadcasting menus cannot be accessed while recording or while the TimeShift operation is in progress The Problem The settings are lost after 5 minutes or every time the TV is turned off There is an intermittent loss of audio or video There are small particles on the TV s bezel The PIP menu is not available A POP TV s internal banner ad appears on the screen The TV is making a popping noise The TV is making a humming noise Try this If the Use Mode is set to Store Demo the TV s audio and video settings are automatically reset every 5 minutes Change the Use Mode Support gt Use Mode to Home Use Check the cable connections and reconnect them Loss of audio or video can be caused by using overly rigid or thick cables Make sur
20. find favourite channels and switch between channels more easily e Rename channel Rename Analogue Channels The new name can be up to 5 characters long e Channel Info Check the information of the channel e Information View detailed information about the current programme Enabling Disabling Password Protection on Channels MENU 123 gt MENU gt Broadcasting gt Edit Channel You can lock channels you don t want your children to view A To enable password protection set Channel Lock to On First navigate to MENU 123 gt MENU gt Broadcasting gt Channel Lock and set it to On Locking Unlocking Channels Select channels from the Edit Channel screen and then select Lock or Unlock at the bottom of the screen When the password entry window appears enter the password This locks or unlocks the selected channels Creating a Personal Favourites List MENU 123 gt MENU gt Broadcasting gt Edit Favourites You can designate frequently watched channels as favourites Favourites channels are highlighted in the Edit Channel and Channel List screens with the symbol You can create up to 5 favourites channel lists Registering a Channel as Favourites Registering the Current Channel as a Favourites Add the current channel to a Favourites list if While watching a TV channel press the MENU 123 button on Samsung Smart control and choose Channel List on virtual remote control Select Edit Favourites from the list
21. once it reaches its maximum capacity The Timeshift function requires at least 1 5GB of free space available on the USB storage device Launching an app switching to an analogue channel or changing the TV to a mode that does not support the Timeshift function automatically terminates the Timeshift function The Timeshift operation will resume if the TV is changed back to a digital channel again S Recommendation Disclaimer Availability depends on the specific model and area S Recommendation with Voice Interaction Recommendation given to common speech commands Voice Interaction limited to the official language of the country of purchase Performance may vary based on content availability clarity and volume of your voice and ambient noise levels Strong regional accents may not be recognised Certain Samsung Smart TV features may not be available without express consent to the collection and use of personal information Certain features within S Recommendation require internet access and may not be available based on service provider language dialect and region Visit www samsung com for more information about service operator compatibility Actual remote control may differ from image shown S Recommendation Content recommendations to fit your TV viewing preferences Certain Samsung Smart TV features may not be available without express consent to the collection and use of personal information Certain features within S Recom
22. quality Enabling BD Wise automatically optimises the TV s resolution This feature is only available when the external device is connected via an HDMI cable Enabling Disabling Sound Feedback MENU 123 gt MENU gt System gt General gt Sound Feedback Sound Feedback provides audio cues as you navigate through menus and select menu options Locking Unlocking the Panel Keys MENU 123 gt MENU gt System gt General gt Panel Lock Use to lock and unlock the TV s front panel buttons Showing Hiding the Samsung Logo while Booting MENU 123 gt MENU gt System gt General gt Boot Logo Use to enable or disable the Samsung logo display that appears when the TV starts up A This function is not available when Samsung Instant On is set to On Enabling the TV to Boot Faster MENU 123 gt MENU gt System gt General gt Samsung Instant On Gay Enable or disable the functionality that enables your TV to turn on quickly A Availability depends on the specific model and area Enabling Disabling the Front Indicators MENU 123 gt MENU gt System gt General gt Light Effect Use to turn the indicators on the front of the TV on off Turning the Light Effect off reduces the TV s power consumption A The colour of the TV s light may vary depending on the model A Availability depends on the specific model and area Removing Flicker MENU 123 gt MENU gt System gt General gt Anti Flicker Remove flickeri
23. s User Manual Y Y amp Connecting an MHL to HDMI cable automatically switches Picture Size to Fit to screen This setting will not change automatically if you are using an HDMI adapter In this case change the setting manually in the menu If you are using an HDMI cable the TV recognises the signal as an HDMI signal and may respond differently than it would to an MHL to HDMI cable connection Use cable shorter than 3M to get the next best UHD 60P viewing quality HDCP 2 2 can only use the HDMI MHL port HDCP is short for High bandwidth Digital Content Protection and is for video copyright protection Refer to the diagram and connect the MHL to HDMI cable to the One Connect s HDMI IN 3 MHL port and the mobile device s USB port The number of connectors and their names and locations may vary depending on the model Once the connection has been made you will be able to select the connected external device using the SOURCE button Using Screen Mirroring MENU 123 gt MENU gt Network gt Screen Mirroring GAND You can wirelessly connect a mirroring enabled mobile device to the TV and play the video and audio files stored on the device on the TV Mirroring refers to the function that plays the video and audio files located on a mobile device on a TV and on the mobile device simultaneously Connecting via a mobile device 1 Launch Screen Mirroring function on your mobile device The mobile device sear
24. select this function and then follow the on screen instructions A Make sure that the HDMI cable is not connected to the TV The HDMI UHD Color settings will be completed only if the HDMI cable is not connected to the HDMI connector A After setting the HDMI connector to On it takes some time to complete the conversion A If the HDMI connector with HDMI UHD Color enabled is connected to a device that does not support UHD content the device may not operate properly If this is the case set HDMI UHD Color for the HDMI connector to Off A Each HDMI connector can be individually optimised for HDMI UHD Color However HDMI UHD Color is available only with a video source featuring the UHD 50P 60P 4 4 4 and 4 2 2 specifications A The HDMI connector with HDMI UHD Color set to Off supports up to UHD 50P 60P 4 2 0 while the HDMI connector with HDMI UHD Color set to On supports up to UHD 50P 60P 4 4 4 and 4 2 2 A Before setting up this mode you need to unplug the HDMI cable from TV e Film Mode Optimises the picture quality for movies Select this mode for watching movies A This feature is only available when watching TV or when the input signal is AV Component 480i 1080i or HDMI 1080i Auto Motion Plus A Availability depends on the specific model and area Removes blurring and judder from scenes with rapid movement If you select Custom you can configure Blur Reduction and Judder Reduction manually and set LED Clear Motion on fo
25. space or room SoundBar Surround Select this option when you want to enjoy a surround sound system by connecting a soundbar and two speakers to the TV in one space or room Volume Level Adjusts the volume of the speakers selected in the list Speaker Test Sends a test sound to each speaker to make sure that your Multiroom Link system works properly Edit Name Allows you to give a name to each speaker The Multiroom Link function is only available when at least one Samsung Multiroom Link compatible speaker is connected to the TV The Multiroom Link function is deactivated when you activate Screen Mirroring The networked speakers may disconnect on their own depending on your network environment The sound quality may be affected by the condition of your wireless network Audio and video may become out of sync depending on your TV model The audio from the secondary device s may lag behind the audio and video of the main device which is playing the source content You can hear the selected audio while the Multi Link Screen is playing For more information refer to the Multiroom Link manual on the Samsung web site www samsung com gt SUPPORT gt Firmware Manuals amp Downloads Enabling the Sound Additional Settings MENU 123 gt MENU gt Sound gt Additional Settings QAND Configure additional settings for optimum audio output DTV Audio Level Digital channels only The TV cannot freely control th
26. subtitles Subtitles will be displayed when watching a broadcast that supports subtitles Switches subtitles On or Off A Subtitles may not be displayed by programmes that do not support subtitles Press and hold the C4 button on the Samsung Smart Control to turn on or off Subtitle A DVD subtitles are only available if the DVD player is connected to an external input connector e Subtitle Mode Set the subtitle mode e Subtitle Language Set the subtitle language A The TV cannot control or modify DVD or Blu ray subtitles To control DVD or Blu ray subtitles use the subtitle feature of the DVD or Blu ray player and the player s remote control Subtitle Options MENU 123 gt MENU gt System gt Accessibility gt Subtitle Select a subtitle mode The list of modes may vary depending on the broadcast e Primary Subtitle Set the primary subtitle language e Secondary Subtitle Set the secondary subtitle language PIP Broadcast Viewing MENU 123 gt MENU gt Picture gt PIP Use the PIP Picture In Picture function to watch TV in a small window while also watching images from an external source such as a DVD player a Blu ray player or a computer in the background Select Picture gt PIP to display the PIP settings window This settings window contains the following options e PIP Activates deactivates PIP e Aerial Select the PIP sub picture broadcast signal e Channel Select the PIP sub picture channel e S
27. supported Read all precautions before using the Timeshift function Press gt while watching TV to activate the Timeshift function This activates Timeshift and displays a progress bar and the following buttons at the top of the screen Information Displays detailed information about the current programme A A Y The programme information may vary depending on the type of incoming signal and may not be available at all for certain programmes This button is only available while watching a live programme Go to Live TV Stop Timeshift Watches the live TV or Exits the Timeshift Pause Pauses the screen The following features are available while paused However audio is not supported while the video is paused Step H Scans through a video one frame at a time Slow Playback Select 44 gt gt to play the video back at 1 2 the normal speed Rewind Fast Forward Slows down or speeds up playback by a factor of up to 5 To restore the normal playback speed press P Fast Forward cannot be used while watching the Current Programme Channel List Displays the channel list Tools You can launch the Tools menu Open the Tools menu to access the context menus available in Timeshift mode Using the Channel List MENU 123 gt MENU gt Broadcasting gt Channel List QAND Launch the Channel List while watching TV to change channels or to see what s on other channels Press and hold the Touchpa
28. the synchronisation when the video and the subtitles are not synchronised Reset Sync Resets the subtitle synchronisation adjustment to 0 Size Changes the font size for the subtitles Encoding Changes the encoding language when the subtitles are displayed incorrectly Rotates the video Changes the Picture Mode setting TV Speaker Plays the video sound through the TV speakers Audio Out Plays the video sound through the external speakers Speaker Settings Plays the TV sound through a speaker that you want Sound Mode Changes the video sound mode during playback when you play the video sound through the TV speakers Sound gt Sound Mode Changes the Sound Mode setting Selects a audio language This function is only available when the video supports multi track sound Displays detailed information about the video Buttons and functions available while playing music Pause Play Pauses or resumes the music Previous Next Plays the previous or next music file Press the 44 button twice to play the previous music file Press the 44 button once starts the current music file from the beginning Press the gt gt button to play the next music file Repeat Plays the current music file repeatedly or all music files in the same folder repeatedly Shuffle Plays the music files in random order Speaker List TV Speaker Plays the music through the TV speakers Audio Out Plays the music through the externa
29. the weather in place name What is the company stock price e When you want to operate the TV Volume level Enabling Disabling TV Voice Enable disable the TV s voice responses to your voice recognition commands Navigate to MENU 123 gt MENU gt System gt Voice Recognition menu and select Use TV Voice Enabling TV Voice in Selected Voice Gender Navigate to MENU 123 gt MENU gt System gt Voice Recognition gt Voice Gender and select a voice gender Enjoy the TV voice in the selected voice gender TV Control using Motions Availability depends on the specific model and area MENU 123 gt MENU gt System gt Motion Control Motion Control is not available When you are playing UHD level video saved on a USB device When you are viewing the digital channel with UHD level resolution It s possible to use motion commands to change channels adjust the volume and control the pointer while searching the web using Smart Hub Please note that not all apps support Motion Control Y Please read through the instructions before using voice recognition For more information refer to Read Before Using Voice Motion or Face Recognition sy Y Motion Control is not available while voice recognition is activated Z 9800 model must be connected to the optional TV camera to use this function The optional TV Camera must be connected to the dedicated USB port at the back of the TV Other
30. type 1 Seek not supported Available only on USB storage devices NonSmart not supported Supported Video Codecs Certain files depending on how they were encoded may not play on the TV File format avi mkv asf WMV mp4 Mov 3gp VrO Mp9 Mpeg ts Tp trp MOv flv vob svi m2ts mts divx webm rmvb Container AVI MKV ASF MP4 3GP MOV FLV VRO VOB PS TS SVAF WebM RMVB Video codecs H 264 BP MP HP HEVC H 265 Main Main10 Main4 2 2 10 Motion JPEG MVC DivX 3 11 4 5 6 MPEG4 SP ASP Window Media Video v9 VC1 MPEG2 MPEG1 Microsoft MPEG 4 v1 v2 v3 Window Media Video v7 WMV1 v8 WMV2 H 263 Sorrenson VP6 VP8 VP9 RV8 9 10 RV30 40 Frame rate Bitrate Resolution fps Mbps 4096X2160 30 3840X2160 60 4096x2160 60 80 30 80 60 1920x1080 20 30 1920x1080 60 20 4096X2160 30 4096x2160 3840X2160 60 1920x1080 60 20 Audio codecs Dolby Digital LPCM ADPCM IMA MS AAC HE AAC WMA Dolby Digital Plus MPEG MP3 DTS Core LBR G 711 A Law u Law Vorbis RealAudio 6 Other Restrictions Codecs may not function properly if there is a problem with the content data Video content does not play or does not play correctly if there is an error in the content or container Sound or video may not work if they have standard bit rates frame rates above the TV s compatibi
31. which Samsung Link software is installed even if you do not connect the TV directly to the computer Connecting via Home Network DLNA Quickly access the photo video and music files saved on a computer by connecting the TV and the computer to the same router or AP Connection notes for computers For the resolutions supported by the TV refer to Computer Connection Precautions As long as file sharing is activated unauthorised access may occur When you do not need to access data disable file sharing Your PC and Smart TV must be connected on the same network Connecting via HDMI Port For HDMI connection one of the following HDMI cable types is recommended e High Speed HDMI Cable e High Speed HDMI Cable with Ethernet A Use an HDMI cable with a thickness of 14 mm or less Using a non certified HDMI cable may result in a blank screen or a connection error A Some HDMI cables and devices may not be compatible with the TV due to different HDMI specifications A This TV does not support HDMI Ethernet Channel Ethernet is a LAN Local Area Network built on coaxial cables standardised by the IEEE A Use cable shorter than 3M to get the next best UHD 60P viewing quality A HDCP 2 2 can only use the HDMI MHL port HDCP is short for High bandwidth Digital Content Protection and is for video copyright protection A Some computers do not support HDMI interface depending on its graphics adapter specifications In this case use
32. working The Problem The TV cannot recognise the USB device or the Format Device Check Device and Device Performance Test functions fail There is a message saying need to format the USB Drive Schedule Recording cannot be used get a performance test failure message and then Schedule Recording and the Timeshift operation stops working Try this Refer to the USB device s manual and see if data can be stored on it Check if the USB device is in a locked state Check if the USB device was formatted when it was connected to a computer Formatting a USB device after connecting it to the TV may result in a formatting failure If Device Performance Test or Format Device has failed there may be a problem with the USB device or its specifications Try using a different USB device Check if the USB device is in a locked state Use the USB recovery function to recover the USB device Check if there is a USB device connected to the TV Check if the channel is a digital channel that can be recorded Recording will automatically stop if the signal becomes too weak The Timeshift function will not work if there isn t enough storage space on the USB device This problem can occur when using a low performance USB Drive that does not support recording A USB hard drive with a speed of 5 400rpm or above is recommended A USB memory stick is not supported Anynet HDMI CEC isn t working The Problem Anynet does not w
33. 130 Setting up Multiroom Speakers 131 Enabling the Sound Additional Settings General Setting the Time and Using the Timer 132 Setting the Current Time 133 Using the Timers Using the Screen Burn Protection and Energy Saving Features 135 Preventing Screen Burn 135 Using Energy Saving Features Using Anynet HDMI CEC 136 Setting Up Anynet HDMI CEC 137 Using Anynet HDMI CEC Using the e Manual 138 Launching the e Manual 138 Additional e Manual Features 139 Updating the e Manual to the Latest Version Updating the Software 140 Updating Software over the Internet 140 Updating Software using a USB connection 141 Enabling Automatic Software Updates Protecting the TV from Hacking and malicious code 141 Checking the TV and Connected Storage Media 142 Configuring additional functions in Smart Security Settings Using Other Functions 143 Enabling Voice Guide for the Visually Impaired 144 Enabling the High Contrast 144 Adjusting the Menu Transparency 144 Expanding the Highlighted Item 144 Learning about the remote control for the visually impaired 145 Using Multi output Audio 145 Listening to the TV through Bluetooth headphones for the audibly impaired 145 Changing the Menu Language 145 Setting Up a Password 146 Enabling Game Mode 146 Enjoying Rich Colours and Superior Picture Quality BD Wise 147 Enabling Disabling Sound Feedback 147 Locking Unlocking the Panel Keys 147 Showing Hiding the Samsun
34. 23 67 500 45 000 49 702 63 981 79 976 47 112 55 935 60 000 65 290 67 500 Vertical frequency Hz 59 940 72 809 75 000 60 317 72 188 75 000 60 004 70 069 75 029 75 000 60 000 59 810 60 020 75 025 59 790 59 887 60 000 59 954 60 000 Clock frequency MHz 25 175 31 500 31 500 40 000 50 000 49 500 65 000 75 000 78 750 108 000 74 250 83 500 108 000 135 000 85 500 106 500 108 000 146 250 148 500 Polarity horizontal vertical _ 4 Supported Resolutions for Video Signals CEA 861 Resolution TOUTE SE a Clock frequency Polarity l Display format frequency frequency horizontal Dots x lines KHz Hz MHz vertical 720 1440 x 576i 50 Hz 15 625 50 000 27 000 ar i 720 1440 x 480i 60 Hz 15 734 59 940 27 000 720 x 576 50 Hz 31 250 50 000 27 000 at 720 x 480 60 Hz 31 469 59 940 27 000 a ee 1280 x 720 50 Hz 37 500 50 000 74 250 a ie 1280 x 720 60 Hz 45 000 60 000 74 250 E a 1920 x 1080i 50 Hz 28 125 50 000 74 250 ay es 1920 x 10801 60 Hz 33 750 60 000 74 250 U 1920 x 1080 24 Hz 27 000 24 000 74 250 1920 x 1080 25 Hz 28 125 25 000 74 250 eo 1920 x 1080 30 Hz 33 750 30 000 74 250 a ke 1920 x 1080 50 Hz 56 250 50 000 148 500 ti 1920 x 1080 60 Hz 67 500 60 000 148 500 LE as 3840 x 2160 24 Hz 54 000 24 000 297 000 i 3840 x 2160 25 Hz 56 250 25 000 297 000 ty a 3840 x 2160 30 Hz 67 500 30 000 297 000 u aes
35. 3840 x 2160 50 Hz 112 500 50 000 594 000 Po 3840 x 2160 60 Hz 135 000 60 000 594 000 u 4096 x 2160 24 Hz 54 000 24 000 297 000 a 4096 x 2160 25 HZ 56 250 25 000 297 000 nar es 4096 x 2160 30 Hz 67 500 30 000 297 000 a ie 4096 x 2160 50 Hz 112 500 50 000 594 000 or eg 4096 x 2160 60 Hz 135 000 60 000 594 000 aa es Read Before Using Bluetooth Devices Restrictions on using Bluetooth e The Samsung Bluetooth Speaker is only available when a device is supporting TV SoundConnect e You can t use Bluetooth Devices Speaker Select MENU gt Sound gt Speaker Settings gt Speaker Select and Surround features simultaneously e Compatibility issues may occur depending on the Bluetooth Devices A Mobile exclusive headphone may not be available depending on the environment e Sync issues may occur depending on the Bluetooth Devices e he TV and Bluetooth Devices may disconnect depending on the distance between them e A Bluetooth device may hum or malfunction When a part of your body is in contact with the receiving transmitting system of the Bluetooth device or the TV When the device is subject to electrical variation from obstructions caused by a wall corner or office partitioning When the device is exposed to electrical interference from same frequency band devices including medical equipment microwave ovens and wireless LANs e If the problem persists be sure to use a Digital Sound Output Optical port or HDMI AR
36. 4 4 4 and 4 2 2 if HDMI UHD Color is set to Off if HDMI UHD Color is set to On cme ee ome eee Read Before Using Voice Motion or Face Recognition Precautions for Voice Motion and Face Recognition Face Recognition This product saves thumbnail images of users faces for use during the Face Login Logging into the Smart Hub via Face Recognition may be less secure than logging in using an ID and password Using the TV Camera Under some circumstances and under certain legal conditions the use misuse of the TV camera may result in illegal actions There may be obligations under local privacy laws regarding the protection of individuals concerning personal data and on the free movement of such data and possibly other laws including criminal laws regulating camera surveillance both in the workplace and elsewhere By using the TV camera users agree that it will not be used i in locations where cameras are generally prohibited such as bathrooms locker rooms or changing rooms ii in any manner that will result in an invasion of a person s privacy or iii in violation of any applicable laws regulations or statutes If you are using a camera first check the back for a sticker Remove the sticker cover before adjusting the angle of the TV camera When you are no longer using the camera rotate the lens downward and secure it in place This prevents any inadvertent or unintentional camera operation Motion
37. Account on the TV 1 Navigate to MENU 123 gt MENU gt Smart Hub gt Samsung Account and select Log In 2 Select and select Sign In on the Sign In screen 3 Enter your ID and password and then select Sign In Check the Sign me in automatically option if you wish to log into Smart Hub automatically f you forgot your password select Reset password to receive password reset instructions via email 4 Select an image to be used as the profile picture The Samsung Account has been saved on the TV 5 Select Done to log into your Samsung Account Easily Logging Into Your Samsung Account Saved on the TV 1 2 J Navigate to MENU 123 gt MENU gt Smart Hub gt Samsung Account and select Log In Choose your Samsung Account on the Sign In screen and select Sign In Using the login method configured for the selected Samsung Account log into your Samsung Account Linking My Samsung and App Accounts MENU 123 gt MENU gt Smart Hub gt Samsung Account gt Link Service Accounts Linking your Samsung Account to accounts of apps installed on the TV lets you automatically log into your linked app accounts when you log into your Samsung Account For example you can download the Facebook app and link your Facebook account to your Samsung Account In this case logging into your Samsung Account then automatically logs you into your Facebook account as well A To use Link Service Accounts you must first log into your Samsu
38. C Connection ARC Audio Return Channel enables digital sound output using just an HDMI cable However ARC is only available through the HDMI IN 4 ARC port and only when the TV is connected to an ARC enabled AV receiver g Some models may not support ARC A The number of connectors and their names and locations may vary depending on the model Connect an HDMI cable to the One Connect s HDMI IN 4 ARC connector and the device s HDMI OUT connector A Some features such as Smart Hub may not be available if the Source is set to HDMI and 3D Auto View is set to On If this is the case set 3D Auto View or 3D Mode to Off Digital Audio Optical Connection Connecting an AV receiver to the TV via a digital audio optical connector lets you listen to digital audio Connecting a device using an optical cable does not automatically turn off the TV speakers To turn off the TV s speakers set Speaker Select Sound gt Speaker Settings gt Speaker Select to something other than TV Speaker Adjust the audio device s volume using its remote control An unusual noise coming from the audio device while you are using it may indicate a problem with the audio device itself If this occurs ask for assistance from the audio device manufacturer Digital audio is only available with 5 1 channel broadcasts Only use headphones with a 3 conductor TRS type jack The headphone volume and the TV volume are adjusted independently of each other
39. C port Licence DIVX HD DivX Certified to play DivX video up to HD 1080p including premium content ABOUT DIVX VIDEO DivX is a digital video format created by DivX LLC a subsidiary of Rovi Corporation This is an official DivX Certified device that has passed rigorous testing to verify that it plays DivX video Visit divx com for more information and software tools to convert your files into DivX videos ABOUT DIVX VIDEO ON DEMAND This DivX Certified device must be registered in order to play purchased DivX Video on Demand VOD movies To obtain your registration code locate the DivX VOD section in your device setup menu Go to vod divx com for more information on how to complete your registration DivX DivX Certified and associated logos are trademarks of Rovi Corporation or its subsidiaries and are used under licence Covered by one or more of the following U S patents 7 295 673 7 460 668 7 515 710 7 519 274 dts Premium Sound 5 1 Manufactured under a licence from U S Patent No s 5 956 674 5 974 380 5 978 762 6 487 535 6 226 616 7 212 872 7 003 467 7 272 567 7 668 723 7 392 195 7 930 184 7 333 929 and 7 548 853 DTS the Symbol and DTS and the Symbol together are registered trademarks amp DTS Premium Sound 5 1 is a trademark of DTS Inc 2012 DTS Inc All Rights Reserved DOLBY DIGITAL PLUS This product was manufactured under a licence from Dolby Laboratories Dolby and the do
40. Control Motion Control uses the camera For Motion Control to work you must be within the camera s recognition range The camera s recognition range varies depending on the ambient light level and other factors Run the Motion Control Environment Test before using Motion Control to determine the camera s recognition range You may experience physical fatigue when using Motion Control for extended periods Voice Recognition For the best voice recognition experience we recommend that you use a Samsung Smart Control Voice recognition does not support signs such as the minus symbol and special characters neither a word nor sentence that contains numbers or signs It may be not available for certain languages or dialects or in some areas It also differs in performance depending on the selected language pronunciation voice sound level and ambient noise Voice Text Input requires that you agree to any third party app s voice privacy policy and that you provide Samsung with the your MAC address and other private information Voice Text Input lets you enter text using voice commands instead of a mouse keyboard or remote control This feature is particularly useful for searching browsing the web and using applications You must agree to the following privacy notices before using Interactive voice recognition Voice Recognition Privacy Notice and Nuance Privacy Notice Requirements for Using Voice Motion or Face Recogniti
41. Control then select SOURCE on the On Screen Remote On the Source screen select the device and then press and hold the Enter button Select Anynet HDMI CEC from the list The following list appears though it may differ based on the external device Anynet HDMI CEC Displays a list of HDMI CEC compliant devices connected to the TV Select View TV to exit Anynet HDMI CEC and start watching TV To switch to the screen of an external device simply select that respective device Connected Device Menu Display the menu of the connected device If the target device is a DVD player the DVD menu is shown Connected Device Tools Displays a list of frequently used functions available for the device If the target device is a DVD player the DVD playback menu is shown A Some external devices may not support this option Connected Device Title Menu Display the connected device s title menu If the target device is a DVD player the DVD title menu is shown A Some external devices may not support this option Using the e Manual Launching the e Manual MENU 123 gt MENU gt Support gt e Manual The embedded e manual contains information A You can also download a copy of the e manual from Samsung s website and read it on your computer or print it out g Yellow words indicate a menu item white bold words indicate remote control buttons Arrows are used to indicate the menu path Example Picture gt Picture M
42. Hz A Some S PDIF receivers may not be compatible For such incompatible receivers deactivate HD Audio and use normal audio mode instead A The HD audio signals available on the TV are not available on external audio players connected via HDMI Bluetooth or Wi Fi networks Auto Volume When you change channels video sources or content Auto Volume automatically adjusts the TV s volume level so that the volume level remains the same for all sources For example if you switch from a streaming video application to a Blu ray player or a favourite TV channel Auto Volume can modify the volume up to 12db to equalise the sound The Auto Volume function has two settings Normal and Night Normal applies a normal level of volume adjustment Night applies a slightly lower volume level and is ideal for late night TV viewing If you want to use the volume control of a connected source device to control the sound deactivate the Auto Volume function When you use the Auto Volume function with a source device the device s volume control may not function properly Setting the Time and Using the Timer Setting the Current Time MENU 123 gt MENU gt System gt Time gt Clock GWG Set the clock manually or automatically Once the clock has been set you can select the INFO button on virtual remote control to check the current time A The clock must be reset every time the power is disconnected Setting the Clock using Digital Broadcast Info MEN
43. Motion Control gt Motion Control To enable Motion Control face the TV camera and raise your hand from a comfortable position with the index finger spreading upwards and move it left or right slowly When your hand is successfully recognised by the TV camera Motion Control is activated and a pointer appears on the screen A If Motion Control is activated a pop up window appears and guides you through basic use of Motion Control Moving your hand out of the range of the TV camera deactivates Motion Control To reactivate Motion Control simply raise your hand towards the TV camera within 3 seconds The recognition may be terminated if the index finger does not fully spread out or is moved too fast Using Motion Control Tutorial MENU 123 gt MENU gt Support gt Motion Control Tutorial This lets you familiarize yourself with the basics of using Motion Control From the Support menu run Motion Control Tutorial A If Motion Control is activated a pop up window appears and guides you through basic use of Motion Control Learning Motion Control Basics The following basic motion control commands are available Moving the pointer Moving your hand moves the pointer accordingly Selecting an item Fold and then spread your index finger as if clicking on a mouse You can select a TV menu or run a function Keeping your index finger folded is like holding down the remote control button Moving around pages or conten
44. NTER button select MENU 123 gt MENU gt Support gt Smart Control Tutorial x Displaying the Remote Control on the Screen virtual remote control You can display and use the On Screen Remote on the TV s screen by pressing the MENU 123 button on the Samsung Smart Control The virtual remote control buttons may vary depending on the TV s current status Button neo wD Move Number Pad to the Right Move Number Pad to the Left Menu Source Voice Recognition Guide INFO Channel List O i TA ES A Guide INFO Channe Multi Li Sports e Manual Picture Picture Speaker DUAL Aerial Description You can directly enter the channel number to switch to that channel Select Pre CH to return to the previous channel Controls the item when you are playing a video photo or music file or watching a recorded programme You can also use the buttons to control the content on an external device Use frequently used functions while watching TV In addition you can use additional functions that may vary depending on the currently running function Moves the number pad to the left or right Displays the menu on the screen Show TV source menu Enter voice recognition function Enter guide function Displays information about the current program or content Launch the Channel List Button Multi Link Screen Sports Mode Picture Size Picture Mode Speaker List DUAL Ae
45. Once a Samsung Account has been created a confirmation email will be sent to the email address you entered as your ID Open the confirmation email and click the confirmation button to finalize the Samsung Account setup process Creating a Samsung Account using Sign Up Samsung Account Menu 1 Navigate to MENU 123 gt MENU gt Smart Hub gt Samsung Account gt Create Account and select Create a Samsung account Agree Samsung account Terms amp Conditions and Privacy Policy and press lt button 3 Create a Samsung Account according to the instructions on the Create Account screen Once a Samsung Account is created you will be automatically logged in to Smart Hub Creating a Samsung Account using a Facebook Account A Availability depends on the specific model and area MENU 123 gt MENU gt Smart Hub gt Samsung Account gt Create Account gt Create a Samsung account using Facebook Enter your Facebook ID and password and then follow the on screen instructions to complete account setup Once a Samsung account is created you are automatically signed in to your Samsung account Samsung account and Facebook account are automatically linked when you create a Samsung account with your Facebook account Signing into Samsung Account MENU 123 gt MENU gt Smart Hub gt Samsung Account gt Log In Logging into and Saving a Samsung Account If you haven t logged into your Samsung Account on the TV you must save your Samsung
46. PIN The PIN input window appears 2 Enter a PIN The default PIN is 0000 3 Enter a new PIN and then enter it again to confirm it The PIN change is complete G if you forget your PIN you can reset it using the Samsung Smart Control With the TV turned on press the following buttons on the remote to reset the PIN to 0000 K RETURN RETURN gt RETURN is the Volume Up button is the Volume Down button The K button is on the left side of the remote x For the Standard Remote Control In Standby mode MUTE gt 8 2 4 4 ON Enabling Game Mode MENU 123 gt MENU gt System gt General gt Game Mode AND Game Mode optimises the TV s settings for playing video games on a gaming console such as PlayStation or Xbox Requirements e Game Mode cannot be used for normal TV viewing e Connect the gaming console before enabling Game Mode Otherwise the picture quality may suffer e The screen may shake a little e Enabling Game Mode automatically sets the Picture Mode to Standard and the Sound Mode to Movie e To use a different external device first disconnect the game console and disable Game Mode Enjoying Rich Colours and Superior Picture Quality BD Wise MENU 123 gt MENU gt System gt General gt BD Wise Connecting a Samsung DVD player Blu ray player or home theatre system that supports BD Wise enables the richest colours and best possible picture
47. Schedule Recording Sessions You can delete scheduled recording sessions 1 Select Broadcasting gt Schedule Manager 2 Select a session from the Schedule Manager A pop up window appears 3 Select Delete This cancels the selected recording session Editing Schedule Recording Sessions You can change the settings of scheduled recording sessions 1 Select Broadcasting gt Schedule Manager 2 Select a session from the Schedule Manager A pop up window appears 3 Select Edit and change the settings of the selected session 4 Once finished select OK This applies the changes you made to the selected recording session Viewing Recorded Programmes 1 Press SOURCE button 2 Select a USB recording device A list of recordings appears 3 Select a recording file from the list or select p to play the selected file Available Buttons and Features while Playing Recordings Press Enter Playback controls will appear To hide the controls press RETURN Buttons that appear are different depending on the file being played e Zoom You can pause the current file recorded programme and zoom in any sections of the screen Press the EN button for easier use Youcan only use this function for programmes recorded in Sports Mode e Stop Stop playback of the file recorded programme e Pause Play Pause the file recorded broadcast or resume if already paused When the video is paused you can use the following functions How
48. System gt Voice Recognition gt Language and select a preferred language from the list Now you can use voice recognition in the specified language Interactive voice recognition is not available in some languages If this is the case choose a different language Adding or deleting trigger words MENU 123 gt MENU gt System gt Voice Recognition gt Trigger Word You can add or delete trigger words A trigger word is a word or phrase that you say to start the Voice Recognition function To add a new trigger word to the list select Add Trigger Words To remove a trigger word from the list select it and then select Delete Trigger Words Testing noise around the TV s built in microphone For 9900 Series MENU 123 gt MENU gt System gt Voice Recognition gt Voice Recognition Environment Test This test determines how well Voice Recognition will work in the TV s current environment Perform the Voice Recognition Environment test before using Voice Recognition to make sure it functions properly 7 Run Voice Recognition Environment Test and stand within 3 5m of the TV 2 Select Start to measure the ambient noise If the ambient noise level is suitable the test will continue to the next step If this part of the test fails remain quiet and try again 3 Say the command loudly and clearly within 30 seconds If the TV successfully recognises your voice the test continues to the next step If this part of the test fails
49. The TV cannot connect to non certified wireless routers Computer Connection Precautions When you connect your TV to a computer set the computer s video card to one of the standard resolutions listed in the tables below or on the next page The TV will automatically adjust to the resolution you choose Note that the optimal and recommended resolution is 1920 x1080 Choosing a resolution not included in the tables can result in a blank screen or just the power indicator turning on Refer to the user manual of your graphics card for compatible resolutions IBM 720 x 400 1152 x 870 68 681 75 062 100 000 VESA DMT Resolution Dots x lines 640 x 480 640 x 480 640 x 480 800 x 600 800 x 600 800 x 600 1024 x 768 1024 x 768 1024 x 768 1152 x 864 1280 x 720 1280 x 800 1280 x 1024 1280 x 1024 1366 x 768 1440 x 900 1600 x 900RB 1680 x 1050 1920 x 1080 Display format 60 Hz 72 Hz 75 Hz 60 Hz 72 Hz 75 Hz 60 Hz 70 Hz 75 Hz 75 Hz 60 Hz 60 Hz 60 Hz 75 Hz 60 Hz 60 Hz 60 Hz 60 Hz 60 Hz Horizontal frequency KHz 31 469 37 861 37 500 37 879 48 077 46 875 48 363 56 476 60 0
50. U 123 gt MENU gt Broadcasting gt Audio Options Gian e Audio Language Digital channels only Change the default value for audio languages Primary Audio Set the primary audio language Secondary Audio Set the secondary audio language The available language may differ depending on the broadcast e Audio Format Digital channels only Change a desired audio format The supported audio format may vary depending on the broadcast programme Audio Description MENU 123 gt MENU gt System gt Accessibility gt Audio Description Not available in all locations Digital channels only This function handles the Audio Stream for the AD Audio Description which is sent along with the Main audio from the broadcaster Audio Description Turn the audio description function on or off A Volume Adjust the audio description volume Using the Channel Settings MENU 123 gt MENU gt Broadcasting gt Channel Settings Manual Tuning MENU 123 gt MENU gt Broadcasting gt Channel Settings gt Manual Tuning VO scans for a channel manually and stores in the TV If a channel is locked using the Channel Lock function the PIN input window appears This function depends on the country and region When Aerial Source is set to Terrestrial or Cable e Digital Channel Tuning Scans for a digital channel 1 Select the New A When selecting Aerial Terrestrial Channel Frequency Bandwidth A When selecting Aerial
51. U 123 gt MENU gt System gt Time gt Clock gt Clock Mode Set Clock Mode to Auto The TV automatically downloads the correct time from a digital channel To enable this option the TV s Antenna jack must be connected to either an antenna or a cable output and must be receiving digital broadcasts The accuracy of the time information received may vary depending on the channel and signal If your TV is connected to a set top box using HDMI or Component connections you must set the time manually If the Clock is Wrong in Auto Mode MENU 123 gt MENU gt System gt Time gt Clock gt Time Offset If the time set automatically is incorrect you can offset the clock in 1 hour increments by as much as 12 hours Select System gt Time gt Clock gt Time Offset and offset the clock to the correct time A Time Offset adjusts the time through network connections and is only available if the Clock is set to Auto and the TV is connected to the Internet though a local area network A Time Offset will adjust the time if the TV fails to receive time information through normal digital broadcast signals Setting the Clock Manually MENU 123 MENU gt System gt Time gt Clock gt Clock Set Gay Manually enter the time Set Clock Mode to Manual and then select Clock Set to enter the current time and date Clock Set Set the current Date and Time Using the Timers Using the Sleep Timer MENU 123 gt MENU gt System gt Time
52. USB ports do not support the TV camera or Motion Control Using the TV camera MENU 123 gt MENU gt System gt Smart Security gt Settings gt Camera Set Camera to On to use the TV camera Testing Ambient Illumination Using the TV Camera MENU 123 gt MENU gt System gt Motion Control gt Motion Control Environment Test Run this test before using Motion Control to ensure proper functionality 1 Initiate the Motion Control Environment Test and select Start 1 5m to 4m away from the TV If the light is reflected onto the TV s screen or there are moving objects in the background the motion may not be properly recognised by the TV 2 Face the TV camera and follow the onscreen instructions to raise your hand from a comfortable position with the index finger spreading upwards and move it left or right slowly A pointer appears on the screen when the TV recognises the action If the recognition fails change the hand position and try again Checking Illumination Motion Control Environment Check MENU 123 gt MENU gt Support gt Self Diagnosis gt Voice amp Motion Control Environment Check Navigate to MENU 123 gt MENU gt Support gt Self Diagnosis menu and select Motion Control Environment Check This function measures the illumination levels around the built in camera and microphone of the TV to check if they are suitable for motion control use Activating Motion Control MENU 123 gt MENU gt System gt
53. V sound that has been optimised for the your sense of hearing and the ambient environment Sound Support Functions selecting Speakers MENU 123 gt MENU gt Sound gt Speaker Settings gt Speaker Select QAND This lets you choose which speakers the TV uses for audio output To listen to the audio through the speakers of a connected receiver or home theatre only select Receiver or Audio Out To listen to audio through the TV s speakers and the speakers of a connected AV receiver or home theatre simultaneously select TV Speaker If this causes an echo effect choose any speaker option other than TV Speaker to mute the TV speakers or turn off the receiver or home theatre A Using external speakers alone disables the volume button and the mute function In addition certain Sound options will also be disabled Designating the TV s Installation Type MENU 123 gt MENU gt Sound gt Speaker Settings gt TV Installation Type Specify the TV s installation type Choose between Wall Mount and Stand to optimise the TV s sound automatically Listening to TV Sound through Samsung Bluetooth Audio MENU 123 gt MENU gt Sound gt Speaker Settings gt TV Speaker TV SoundConnect Bluetooth headphone List Connect the TV to a Samsung audio device for a richer clearer sound This option is only available for Samsung audio devices that support SoundShare Pair the Samsung audio device using the TV s Bluetooth function Refer to
54. actory default settings Support gt Self Reset Settings Diagnosis gt Reset Reset all saved information relating to Samsung accounts and linked service accounts as well as Smart Hub service agreements and applications Resetting Smart Smart Hub gt Reset Hub Smart Hub Other Issues The Problem The TV is hot The picture won t display in full screen The Mode Not Supported message appears The Subtitle item in the TV menu is grayed out The TV smells of plastic The Signal Information option under Self Diagnosis isn t activated The TV is tilted to the side The Broadcasting option has been deactivated Try this Watching TV for an extended period of time causes the panel to generate heat The heat from the panel is dissipated through internal vents running along the top of the TV The bottom however may feel hot to the touch after extended use Children watching TV need constant adult supervision to prevent them from touching the TV This heat however is not a defect and does not affect the TV s functionality HD channels will have black bars on either side of the screen when displaying upscaled SD 4 3 content Black bars will appear at the top and bottom of the screen when you watch movies that have aspect ratios different from your TV Adjust the picture size options on your external device or set the TV to full screen The output resolution of the attached device is not supported
55. ant devices that are connected to the TV This option is only available with Anynet HDMI CEC set to On Format Device Formats USB recording devices connected to the TV This option is only available when a USB device has been selected Remove USB Device Used to safely remove a USB device connected to the TV This option is only available when a USB device has been selected Edit Device Type Changes the types of the external devices Select an external device to change Remove Source Thumbnail Deletes an external device from a source e Universal remote setup Select Universal remote setup on the screen to configure the universal remote function By configuring a universal remote control you can control cable boxes Blu ray players home theatres and other external devices using a single remote control Availability depends on the specific model and area Connection Notes A The number of connectors and their names and locations may vary depending on the model A Refer to the external device s operating manual when connecting it to the TV The number of external device connectors and their names and locations may vary depending on the manufacturer Inserting Batteries into Samsung Smart Control To use Samsung Smart Control first refer to the figure below and insert batteries into the unit Colours and shape may vary depending on the model Availability depends on the specific model and area 1 Gent
56. b info and other information you need to receive the service support amp Y Press to view the open source licence There is a problem with the screen Testing the Picture MENU 123 gt MENU gt Support gt Self Diagnosis gt Picture Test Before you review the list of problems and solutions below run the Picture Test to determine if the problem is caused by the TV The Picture Test displays a high definition picture you can examine for flaws or faults If the test picture does not appear or there is noise or distortion the TV may have a problem Contact Samsung s Call Centre for assistance If the test picture is displayed properly there may be a problem with an external device Please check the connections If the problem persists check the signal strength or refer to the external device s user manual A If the test picture does not appear or there is noise or distortion the TV may have a problem Contact Samsung s Call Centre for assistance A If the test picture is displayed properly there may be a problem with the external device Please check the connections If the problem persists check the signal strength or refer to the external device s user manual The Problem Flickering and Dimming Component Connections Screen Colour Screen Brightness Auto Motion Plus Blur Unwanted Powering Off Problems Powering On Unable to find a Channel The TV image does not look as good as it did in the sto
57. ce supports Anynett Check whether the HDMI cable is properly connected Go to System and see if Anynet HDMI CEC has been set to On Scan for Anynet devices again Anynet devices must be connected to the TV using an HDMI cable Make sure the device is connected to your TV with an HDMI cable Some HDMI cables may not support Anynet If the connection is terminated because there has been a power failure or the HDMI cable has been disconnected please scan for the device again Connect an optical cable to the TV and the receiver ARC enables digital sound to be outputted via the HDMI ARC port However ARC is only available when the TV is connected to an audio receiver that supports ARC am having trouble launching using apps launched an app but it s in English Languages supported by the app may be different from the user interface language How can change the The ability to change the language depends on the service provider language My application is not Check with the service provider working Refer to the help section on the application service provider s website My file won t play The Problem Tay O O Some files can t be This problem may occur with high bitrate files Most files can be played back but played you might experience problems with high bitrate files want to reset the IV Reset Picture Sound Channel Smart Hub and all other settings except for the network settings to their f
58. ches for available devices to connect to Select the TV from the list The TV automatically allows the connection and the device connects Select Allow to connect the mobile device A All previously allowed mobile devices will automatically connect without needing approval x If you select Deny the device cannot connect To change the connection status of a denied device select MENU 123 gt MENU gt Network gt Multimedia Device Manager select the device and select Allow Connecting by automatically allowing the connection 1 Select MENU 123 gt MENU gt Network gt Screen Mirroring You can also start screen mirroring by pressing the SOURCE button on your remote and selecting Screen Mirroring from the list at the top of the screen Launch Screen Mirroring function on your mobile device The mobile device searches for available devices to connect to Select the TV from the list The TV automatically allows the connection and the device connects A If the mobile device cannot connect turn off and on the TV and mobile device Managing the connection status of previously connected mobile devices w N Y Select MENU 123 gt MENU gt Network gt Multimedia Device Manager The TV displays a list of devices that have previously connected to the TV or have tried to connect to the TV and been denied The status of the connection Allow Deny is also displayed Select a device Select connection type or
59. ck System gt Time gt Clock has not been set the browsing history will not be saved 21 The browsing history is saved from latest to oldest with the oldest entries being overwritten first 22 Depending on the types of video audio codecs supported it might not be possible to play certain video and audio files while playing Flash content 23 Video sources from PC optimised streaming service providers may not play properly on our proprietary web browser 24 Using the on screen QWERTY keyboard automatically disables PIP Except when entering a URL Photo Video and Music File Limitations e The TV supports MSC Mass Storage Class USB devices only MSC is a class designation for mass USB Drives Types of MSC devices include external hard drives flash card readers and digital cameras USB hubs are not supported These kinds of devices must be connected directly to the TV s USB port The TV may not be able to recognise the USB device or read the files on the device if it is connected to the TV via a USB extension cable Do not disconnect the USB device while transferring files e When connecting an external hard drive use the USB 3 0 5V 1 0A port We recommend that you use an external hard drive with its own power adapter e Certain digital cameras and audio devices may not be compatible with the TV e If there are multiple USB devices connected to the TV the TV might not be able to recognise some or all the devices USB devic
60. content of a computer that has been registered to Samsung Link under your Samsung account even if the computer and the TV are not connected to the same router or AP 1 Visit the Samsung content and service portal http link samsung com on a computer and sign into your Samsung account A To install Samsung Link desktop software you will need to first sign into your Samsung account If you don t have a Samsung account create one first Install Samsung Link desktop software When the installation is complete the computer will be registered to Samsung Link Specify the folder you wish to link to the TV You can view and play photo video and music files contained in the specified folder on the TV screen A For more information on using Samsung Link desktop software refer to the software s Help section Connecting via Home Network DLNA Quickly access and view play photo video and music files from a computer on the TV screen 1 Connect the TV and the computer to the same router or AP A home network will be configured once the two connections are established A Home Network DLNA enables content sharing between the TV computers and mobile devices connected to the same wired or wireless router From the computer select Control Panel gt Network and Internet gt Network and Sharing Centre gt Change advanced sharing settings and select Choose media streaming options to activate media streaming From the
61. cord and wait until the cable box reboots It may take up to 20 minutes Set the output resolution of the cable box to 1080i or 720p can t hear the sound clearly Testing the Sound MENU 123 gt MENU gt Support gt Self Diagnosis gt Sound Test Before you review the list of problems and solutions below make sure that the Speaker Select menu item is set to TV Speaker and then listen to the speakers again If the TV still does not play audio run the Sound Test The Sound Test uses a built in melody to check for sound problems If the TV does not play sound during the Sound Test or the sound is distorted there may be a problem with the TV Contact Samsung s Call Centre for assistance If the TV plays the Sound Test melody without distortion there may be a problem with an external device Please check the connections If the problem persists refer to the external device s user manual If you can t hear the melody or there is a problem make sure Sound gt Speaker Settings gt Speaker Select is set to TV Speaker and then try again If the problem persists there may be a problem with the TV Contact Samsung s Call Centre for assistance If the melody is played there may be a problem with the external device Please check the connections If the problem persists refer to the external device s user manual The Problem There is no sound or the sound is too low at maximum volume The picture is good but there is no so
62. d Enter button To launch the Channel List Select a channel from the Channel List to jump to it right away To quickly scroll through the list use the channel up down buttons This moves the focus one page at a time The Channel List screen contains the following icons A An analogue channel A favourites channel A locked channel Using Options Press lt button The following options are available History Displays a list of channels that you viewed recently Add a New List Allows you to creating a new channel list by adding channels from a favourites list analogue or your interested category Favourites 1 Favourites 5 Displays the selected channel list You can add or remove channels to or from the list Options The following options are available Function Description Aerial Choose between Terrestrial Cable Sorting Sort the list by Channel Number or by Name Digital channels only Edit Channel Lists You can edit your channel lists Allows you to rearrange the order of channels in the channel list or remove channels from the channel list Edit Channel You can remove or rename the channels Edit Favourites Designate favourites channels Changing to Favourites Press gt button to select Favourites 1 through Favourites 5 This shows the selected list s channels However a Favourites list can only be selected if it contains at least one favourites channel If you haven t created a Favourites list ye
63. d select Options from the top of the screen and then select Lock Unlock My Apps All selected apps are locked or unlocked Rearranging apps Select Options on the APPS screen and then select Sort By to sort the apps by date time or others Rating Reviewing an App On the detailed app information screen you can rate the app or send a review to the app developer A To rate or review an app you must log into your Samsung Account You can only rate or review apps that you have purchased or downloaded with your Samsung Account Updating an App 1 On the SAMSUNG APPS screen move to the app you wish to update 2 Press and hold the Enter button A pop up menu appears 3 On the pop up menu on the screen select Update Apps A pop up window appears 4 Select all the apps you wish to update and then select Update All the selected apps are updated to the latest versions Setting Auto App Update MENU 123 gt MENU gt Smart Hub gt App Auto Update To update apps automatically navigate to MENU 123 gt MENU gt Smart Hub gt App Auto Update and set App Auto Update to On The apps installed on the TV are automatically updated as updates become available Using the MY CONTENT Service 3 gt Featured gt MY CONTENT MY CONTENT A Screen images may differ by model You can play the media content saved on the storage devices such as a USB device mobile device and camera in the TV When you connect a storage device to
64. dditional Functions Smart Features Viewing Multiple Screens or Features with Multi Link Screen 51 Using Multi Link Screen 52 Testing Smart Hub connections 52 Launching Smart Hub automatically 53 Using the Smart Hub Tutorial 53 Resetting Smart Hub Using Smart Hub with Samsung Account 54 Creating a Samsung Account 56 Signing into Samsung Account 57 Linking My Samsung and App Accounts 58 Changing and Adding Information to Samsung Account 58 Deleting All Samsung Accounts from the TV Using the NewsON Panel 59 News 59 Weather Using SAMSUNG APPS Service 60 Using Pop Up Menu Functions 61 Installing an App 62 Removing an app from the TV 62 Locking and unlocking apps 62 Updating apps 62 Rearranging apps 62 Rating purchased apps 62 Using other app features and functions 62 Default Apps Using the web browser 63 Browsing preferences 66 Removing an App from the TV 66 Locking and unlocking apps 66 Rearranging apps 66 Rating Reviewing an App 66 Updating an App Using the MY CONTENT Service 67 Read before playing media content 68 Playing multimedia content in a computer or mobile device 68 Playing media content saved on a USB device 69 Buttons and functions available while viewing photos 70 Buttons and functions available while viewing videos 72 Buttons and functions available while playing music 72 Listening to music in HD quality 73 Functions on the media content list screen 73 Listening to 3D Audio in 3D Mode
65. de feature s volume speed and level settings e Volume Change the Voice Guide option s volume level The Voice Guide volume may vary depending on the TV volume setting e Pitch Adjust the pitch of Voice Guide e Speed Change the Voice Guide option s tempo Enabling the High Contrast MENU 123 gt MENU gt System gt Accessibility gt High Contrast Navigate to MENU 123 gt MENU gt System gt Accessibility and set the High Contrast option to On This option changes major service screens to white text on black background or change the transparent TV menus to opaque so that text can be more easily read A Press and hold the MUTE button on the Samsung Smart Control to turn on or off High Contrast Adjusting the Menu Transparency MENU 123 gt MENU gt System gt Accessibility gt Menu Transparency Navigate to MENU 123 gt MENU gt System gt Accessibility and adjust the opacity level Adjust the menu s transparency A When the High Contrast System gt Accessibility gt High Contrast setting is set to On menu display is automatically set to opaque and you cannot change the Menu Transparency settings MENU 123 gt MENU gt System gt Accessibility gt Enlarge Navigate to MENU 123 gt MENU gt System gt Accessibility and set Enlarge to On Get whether or noD to enlarge the highlighted item e Press and hold the C4 button on the Samsung Smart Control to turn on or off Enlarge Learning ab
66. delete the device from the list This function is only available if the devices have previously connected to the TV or have previously attempted to connect and been denied Connecting Mobile Devices without a Wireless Router Wi Fi Direct MENU 123 gt MENU gt Network gt Wi Fi Direct Wi Fi Direct lets you connect mobile devices directly to your TV using wireless technology After connecting a device to the TV using Wi Fi Direct it will be possible to view play video photo and music files from the device on the TV The mobile device must support Wi Fi Direct Make sure the mobile device you intend to use supports Wi Fi Direct Enable Wi Fi Direct on the mobile device and then launch Wi Fi Direct The TV automatically scans for and displays a list of available devices The TV s name also appears on the mobile device Select the device from the list to initiate a connection If a connection request is made by the TV a permission message appears on the mobile device and vice versa Allow the connection This completes the connection process Connecting via Smart View By installing and running the Smart View app on the mobile device you can view the device screen on the TV or play the device s multimedia content videos photos and music on the TV However Smart View does not work when this function is in use Go to Google Play and search for and install Smart View on your mobile device Smart View is a cros
67. deos to display available options Preview images of the frames at the same time intervals are displayed so that you can move to a specific frame easily The options disappear when you press the RETURN button Pause Play Pauses or plays the video You can use the following functions when the video is paused With the video paused the TV does not play audio Step Scans the paused video one frame at a time by pressing the If button Slow Motion Plays the video in slow playback speed 1 8 1 4 1 2 by pressing the gt gt button Rewind Fast Forward Rewinds or fast forwards the video To increase the rewind or fast forward speed up to 3 times faster than normal select the button repeatedly To restore normal playback speed press the gt button Previous Next Plays the previous or next video Press the 44 button twice to play the previous video Press the l4 button once starts the current video from the beginning Press the gt gt button to play the next video Repeat Plays the current file repeatedly or all files in the same folder repeatedly e Settings Function Picture Size Subtitle Rotate Picture Mode Speaker List Sound Mode Audio Language Information Description Changes the size of the screen The supported picture sizes differ with the video Controls the subtitles of the video Subtitle Turns the subtitles on or off Language Sets the subtitle language Sync Adjusts
68. digital broadcasts A This function is not needed if your TV is connected to a cable or satellite box Digital Signal Info and Strength MENU 123 gt MENU gt Support gt Self Diagnosis gt Signal Information GAND Select Support gt Self Diagnosis gt Signal Information Displays the digital channel s signal information and strength A If your TV is attached to a separate over the air antenna you can use the signal strength information to adjust the antenna for increased signal strength and improved HD channel reception A This is only available for digital channels Recording Programmes You can record current and upcoming programmes using a USB device instead of a video recorder However this is only available for digital channels The icon appears next to programmes and channels for which a Schedule Recording has been set A We recommend a USB hard disk drive with a minimum speed of 5 400rpm for TV recording USB memory sticks are not supported A Read all precautions before using recording Recording Programmes You can record current and upcoming programmes Instant Recording Press the on virtual remote control button to begin recording the current programme right away The Instant and Schedule Recording options from the Guide Select a current programme from the Guide and then select Record You can instantly start recording the programme Alternatively select a programme that will air in the future
69. e TV by holding and moving the Samsung Smart Control After placing a finger on the touchpad a pointer appears on the screen Hold and move the Samsung Smart Control The pointer moves the same way the Samsung Smart Control is moved It s also possible to scroll up and down on scrollable screens A If you remove the finger from touchpad the screen pointer disappears A Navigate to MENU 123 gt MENU gt System gt Smart Control Settings and select Motion Sensitivity to adjust the pointer speed A If the Voice Guide is set to On the Samsung Smart Control s motion sensor gyro sensor does not work To use the Samsung Smart Control s motion sensor set the Voice Guide to Off A Actual menu screen may differ depends on the specific model and area A POINTER J A Actual menu screen may differ depending on the TV model Operating the TV with the directional buttons and the Enter button Press the directional buttons up down left and right to move the pointer focus or cursor in the direction you want or change a setting shown on the focused item Press the Enter button to select an item or run a focused item Press and hold the Enter button to view the guide while watching the TV A To adjust the pointer speed select MENU 123 gt MENU gt System gt Smart Control Settings gt Motion Sensitivity A To use the Samsung Smart Control s motion sensor set Voice Guide to Off To view a tutorial that shows how to use the POI
70. e Edit Favourites screen menu items Adding Realism to Sports 104 Enabling Sports Mode 104 Extracting Highlights Automatically 105 Functions Available in Sports Mode 106 Viewing a Sports Event Recorded in Sports Mode TV Viewing Support Features 107 Showing Subtitles 107 Subtitle Options 108 PIP Broadcast Viewing 109 Scanning for Available Channels 110 Selecting the Broadcast Audio Options 110 Audio Description Using the Channel Settings 111 Manual Tuning 112 Fine Tuning the Screen 112 Reading digital text Picture and Sound Settings Changing the Picture Mode and Adjusting the Picture Quality 113 Choosing the Right Picture Mode for the Viewing Environment 114 Adjusting the Picture Quality for Each Picture Mode 115 Fine Tuning Each Picture Mode Advanced Settings 117 Adjusting the Picture for Easier Viewing Picture Options Viewing in 3D 119 Starting 3D 120 Changing the 3D Mode 121 Adjusting the 3D Effect Picture Support Functions 122 Changing the Picture Size and Position 124 Listening to Audio Only with the Screen Turned Off Picture Off 124 Resetting the Picture Mode Settings Changing the Sound Mode and Using Sound Effects 125 Choosing the Right Sound Mode for the Environment 126 Using Sound Effects 127 Customising Sound Sound Customiser Sound Support Functions 129 Selecting Speakers 129 Designating the TV s Installation Type 129 Listening to TV Sound through Samsung Bluetooth Audio
71. e SOURCE button e When 3D mode is active A The Auto Highlights performance depends on the signal characteristics A It is advisable to use Auto Highlights only while watching a soccer football game Using this for other sporting events may display irrelevant picture frames Functions Available in Sports Mode Press Enter button The following buttons will appear e Zoom You can pause the current video and zoom in on any section of the screen Pan the zoomed in image using A v lt gt buttons To launch this function easily select or press the button A This function is not available when Data Service is active A You cannot use this function when watching a 3D channel or when PIP or MY CONTENT is active e Manual Highlight Pressing this button saves 10 seconds of video leading up to that point and 10 seconds of video that follows as a highlight x This function can also be accessed using the EJ button Y Available only while recording is in progress A Also possible to configure the TV to automatically save highlights without user intervention Select System gt Sports Mode and then set Auto Highlights to On e Stop Recording Use this button while watching a live programme to stop recording it Available only when recording is in progress e Record Start recording the sports event being watched This function is only available when the recording function is supported e Recording Time You can edit reco
72. e the cables are flexible enough for long term use If you are mounting the TV to a wall we recommend using cables with 90 degree connectors This is part of the product s design and is not a defect PIP functionality is only available when you are using an HDMI or Component source Change the Use Mode Support gt Use Mode to Home Use The expansion and contraction of the TV s outer casing may cause a popping noise This does not indicate a product malfunction The TV is safe to use Your TV utilizes high speed switching circuits and high levels of electrical current Depending on the TV s brightness level the TV may seem slightly noisier than a conventional TV Your TV has undergone strict quality control procedures that meet our demanding performance and reliability requirements Some noise coming from the TV is considered normal and is not an acceptable cause for an exchange or refund Before Using the Recording and Timeshift Functions Availability depends on the specific model and area Before Using the Recording and Schedule Recording Functions e To set up a Schedule Recording you must first set the TV s clock Set the Clock System gt Time gt Clock A You can set up a maximum total of 30 Schedule Viewing and Schedule Recording entries e Recordings are DRM protected and therefore cannot be played back on a computer or on a different TV In addition these files cannot be played back on your TV if its video circu
73. e the settings of Schedule Viewing sessions or cancel scheduled sessions altogether A You can set up a maximum total of 30 Schedule Viewing and Schedule Recording entries Deleting Schedule Viewing Sessions You can delete Schedule Viewing sessions 1 Select Broadcasting gt Schedule Manager 2 Select a session from the Schedule Manager A pop up window appears 3 Select Delete This cancels the selected viewing session Editing Schedule Viewing Sessions 1 You can change the settings of Schedule Viewing sessions Select Broadcasting gt Schedule Manager Select a session from the Schedule Manager A pop up window appears 3 Select Edit and change the settings of the selected session 4 Once finished select OK This applies the changes you made to the selected recording session Using Timeshift Timeshift lets you pause and rewind live TV as you would a DVD Timeshift is only available for digital channels and activating Timeshift disables the Broadcasting option Read all precautions before using the Timeshift function For more information refer to Before Using the Recording and Timeshift Functions This function is only available on certain models in specific geographical areas Timeshift requirements A USB recording device must be connected to the TV in order to use Timeshift We recommend a USB hard disk drive with a minimum speed of 5 400rom for use with the TV s Timeshift feature USB memory sticks are not
74. e to quarantine or allow Select Isolate or Block This moves the selected malicious code to the Isolated List or Blocked List A The Isolated List displays all quarantined malicious codes You can try to cure the codes A The Blocked List displays all blocked malicious code You can also quarantine or allow codes from this list Configuring additional functions in Smart Security Settings MENU 123 gt MENU gt System gt Smart Security gt Settings Antivirus Monitors the TV in real time to prevent virus from infecting the TV Network Security Protects the TV from hacking to minimize a leak of private information Camera Turn the TV camera on or off Microphone Turn the TV microphone on or off Auto Scan Makes the TV automatically scan itself and connected storage media when it is turned on Auto Isolate Adds malicious codes found during the scanning process to the Isolated List automatically Using Other Functions Running the accessibility functions quickly You can use the Accessibility Shortcuts menu to quickly run the accessibility functions for the impaired Press and hold the 54 button on the Samsung Smart Control the pop window will show up Even if Voice Guide is set to Off or the Mute mode is activated you can run the Voice Guide function from the Accessibility Shortcuts menu Enabling Voice Guide for the Visually Impaired Y This service or some of functions of it may be not available in some countri
75. e user s agreement on the use terms Trying the interactive voice recognition without completing any of these requirements will display a notification pop up Follow the onscreen instructions and complete the necessary settings The imperative voice recognition is available regardless of the interactive voice recognition settings Use only pre defined commands in the imperative voice recognition mode Please read through the instructions before using voice recognition For more information refer to Read Before Using Voice Motion or Face Recognition You can run Voice Recognition in two modes The short distance recognition mode that uses the microphone built into the Samsung Smart control Press the MENU 123 button and then select Voice Recognition Or press and hold the MENU 123 button The long distance recognition mode that uses the TV s built in microphone Look at the TV screen and then say a command for example Hi TV A This function is only supported for the 9900 series model 9900 models may not recognise your voice with the TV s built in microphone because of the noise surrounding the TV camera and microphone In this case use the short distance recognition mode Press and hold the MENU 123 button and say the command 4 to 6 inches from the microphone on the Samsung Smart Control The optimal volume for voice commands is between 75 dB and 80 dB Using Voice Recognition Tutorial MENU 123 gt MENU gt
76. e volume of the digital audio that it sends to the AV receiver Use this to set the digital audio volume at a comfortable level According to the type of broadcast signal MPEG HE AAC can be adjusted between 10dB and OcdB To increase or decrease the volume adjust between the range 0 and 10 respectively HDMI Audio Format Set the preferred HDMI Audio Input Format Audio Format Audio Delay This Smart TV is SPDIF enabled The Sony Philips Digital Interface SPDIF provides digital audio output to speakers and various digital devices including A V Receivers and home theatres Audio Format Selects the Digital Audio output SPDIF format The available Digital Audio output SPDIF formats may vary depending on the input source Audio Delay This setting helps correct timing mismatches between the audio and video tracks when you are watching TV and listening to audio through a digital audio device Enabling the feature displays a slide bar that you can use to adjust the delay by up to 250ms Dolby Digital Comp Some digital TV programmes provide 5 1 channel Dolby audio This TV converts Dolby audio to stereo audio so that it can play the sound through the TV s speakers There are two methods to choose from RF is for better sound at lower volumes and Line is for higher volumes HD Audio Listen to the audio from the TV in HD quality A Standard audio signals are sampled at 48 kHz while HD audio signals are sampled at 96 k
77. ease press and hold the snap button on the plug instead of directly pulling the plug out A The number of connectors and their names and locations may vary depending on the model Once the connection has been made you will be able to select the connected external device using the SOURCE button AV Connection Refer to the diagram and connect the AV cable to the One Connect s AV input connectors and the device s AV output connectors If you are using the One Connect s AV IN connectors refer to the diagram and connect the device s audio and video output to the TV Make sure the cable colours match the connector colours A The number of connectors and their names and locations may vary depending on the model TV Audio through the External Speakers Your TV has a variety of connectors for audio input from devices such as Blu ray players and DVD players and for audio output to such devices as amplifiers The connectors are listed below e ARC Audio Return Channel e Digital Audio Optical e Audio Analogue There are several issues to bear in mind when using audio input e For better audio quality it is a good idea to use an AV receiver e The number of connectors and their names and locations may vary depending on the model e Refer to the external device s operating manual when connecting it to the TV The number of external device connectors and their names and locations may vary depending on the manufacturer HDMI AR
78. ectly to the home theatre system A home theatre system that has been connected to the TV using an HDMI cable and an optical cable supports 2 channel audio only 5 1 channel audio is however available for digital broadcasts with 5 1 channel audio Setting Up Anynet HDMI CEC MENU 123 gt MENU gt System gt Anynet HDMI CEC Anynet HDMI CEC Enables disables Anynet HDMI CEC Set to Off to disable all Anynet related features Set to On to enable all Anynet HDMI CEC related features Auto Turn Off GA When set to Yes turns off Anynet HDMI CEC compatible external devices when the TV is turned off A Some Anynet HDMI CEC compatible devices do not support this feature Search for Devices Search for Anynet HDMI CEC compatible devices Using Anynet HDMI CEC Selecting an External Device Connect the device to the TV and then press the SOURCE button to display the Source screen Press the MENU 123 button on the Samsung Smart Control then select SOURCE on the On Screen Remote Select Anynet HDMI CEC from the list The Select Device screen appears Select a device and wait for the switch to take place This process may take up to 2 minutes to complete and cannot be cancelled once started Accessing the External Device s Menu Once the TV has switched over to the selected device you can access the device s menu using the TV s remote control Press the MENU 123 button on the Samsung Smart
79. edule Manager screen e Adding Favourites Click Edit Favourite Channels to add the selected programme to the Favourites e Viewing Detailed Information View detailed information about the selected programme The programme information may vary depending on the type of incoming signal and may not be available at all for certain programmes Select a current programme on another channel and select View Details to Watch or Record the programme Select an upcoming programme and select View Details for Schedule Viewing or Schedule Recording A You can only view programmes scheduled after the current time Checking the Current Programme Info While watching TV select INFO on virtual remote control to view information about the current programme in order to view the programme info you must first set the TV s clock Set the Clock System gt Time gt Clock A The programme information may vary depending on the type of incoming signal and may not be available at all for certain programmes In addition select lt and button to view information about the next programme and set up a Schedule Viewing or Schedule Recording for the upcoming programme select that programme You can also enter Schedule Viewing or Schedule Recording by the following path Menu gt Broadcasting gt Schedule Manager Changing the Broadcast Signal MENU 123 gt MENU gt Broadcasting gt Aerial Choose your preferred method of receiving
80. efault apps automatically The default apps may differ depending on the region Using Pop Up Menu Functions Move the focus to an app and press and hold the Enter button You can use the following functions e Delete e More e Reinstall The pop up menu may differ with the apps Installing an App Installing an app quickly Select a category on the APPS screen Move the focus to an app and then press and hold the Enter button The context sensitive menu appears Select Download The selected app is installed on the TV You can view installed apps on the APPS screen Youcan also install the app from detailed information screen When the TV s internal memory is insufficient you can install an app on a USB device Youcanrunan app installed on a USB device only when the USB device is connected to the TV If the USB device is disconnected during an app Is running the app is terminated You cannot run the app installed on the USB device on a PC or another TV Launching an app You can launch an app by selecting an app on the Apps screen The icons below appear in the selected apps and indicate the following e _ The app is installed on a USB device e The app has a password e The app is installed Removing an app from the TV Select an app to remove on the APPS screen and press and hold the Enter button to confirm it If you want to remove multiple apps select all the apps to delete and selec
81. el and area Aerial Connection Before connecting any external devices and cables to the TV first verify the model number A sticker containing the model number is attached to the back of the TV The connection method varies depending on the model An aerial must be connected to the TV in order to receive broadcast signals A An aerial connection is not necessary when a cable box is used A Actual pictures may differ depends on the specific model and area Connect the cable from an aerial or cable outlet to the One Connect s ANT IN connector as shown in the diagram below Connecting to the Internet Establishing a Wired Internet Connection Connecting the TV to the Internet gives you access to online services and SMART features and lets you update the TV s software quickly and easily through the Internet A Actual pictures may differ depends on the specific model and area Connecting a LAN Cable Use a LAN cable A The TV will not be able to connect to the Internet if the network speed is below 10Mbps A Use Cat 7 LAN cables to link your TV to the Internet Access Points There are three ways to connect the TV to your Internet Access Points Using Cat 7 cables connect the One Connect s LAN port to the Access Points as shown in one of the following illustrations e External Modem e IP Router External Modem
82. em appear and sound as if you were actually there In addition it will be possible to use video recording and time shift functions at the same time while watching a sports event and manually or automatically designated highlight scenes if a recording device is connected to the TV when you are using Sports Mode A For more information about recording a programme and using a recording device refer to the Recording Programmes section A For more information about the Time Shift feature refer to the Using Timeshift section Enabling Sports Mode MENU 123 gt MENU gt System gt Sports Mode gt Sports Mode Select System gt Sports Mode and then set Sports Mode to On Picture and sound settings of the TV are automatically optimised for sports events A Enabling Sports Mode changes the Picture Mode to Stadium and the Sound Mode to Stadium and disables some Picture and Sound menus Press Sports Mode button on virtual remote control on screen while watching TV to activate deactivate Sports Mode Extracting Highlights Automatically MENU 123 gt MENU gt System gt Sports Mode gt Auto Highlights Select System gt Sports Mode and set the Auto Highlights to On You can set the TV to automatically save highlights without user intervention However Auto Highlights is not available with these TV operations e Recording two channels simultaneously e While Auto Description is active e Switching the input signal using th
83. ending on the TV model View the current network and Internet status Video Device Connection Your TV has a variety of connectors for video input from external devices such as cable boxes Blu ray players DVD players camcorders and gaming consoles Below is a list of featured connectors shown in descending order of picture quality e HDMI e Component e Composite AV Connect a video device to the TV via an HDMI connector for the best picture quality If the device does not have an HDMI connector try a component connector to get the next best picture quality Y The number of connectors and their names and locations may vary depending on the model A Refer to the external device s operating manual when connecting it to the TV The number of external device connectors and their names and locations may vary depending on the manufacturer HDMI Connection The following types of HDMI cables are recommended High Speed HDMI Cable High Speed HDMI Cable with Ethernet HDMI cables have certain requirements yy amp Y e Y x Use an HDMI cable with a thickness of 14 mm or less Using a non certified HDMI cable may result in a blank screen or a connection error Some HDMI cables and devices may not be compatible with the TV due to different HDMI specifications This TV does not support HDMI Ethernet Channel Ethernet is a LAN Local Area Network built with coaxial cables standardised by the IEEE Use cable shorte
84. er the security key and select Done If the selected network is not security enabled the TV attempts to connect right away 4 A network connection will be attempted Once a connection is established the TV displays a confirmation message Select OK If the attempt fails try again or connect manually Connecting to a Wireless Internet Network Manually MENU 123 gt MENU gt Network gt Network Settings With networks that require a static IP address you will need to enter the IP address subnet mask gateway and DNS values manually to connect to the network To get the IP address subnet mask gateway and DNS values contact your Internet Service Provider ISP Ly a 4 r Refer to the Dynamic versus Static IP Addresses section for more information on dynamic IP and static IP addresses Setting the Network Type to Wireless automatically displays a list of available wireless networks Select the network SSID you want to connect to If the wireless router doesn t appear in the list select Add Network and enter the network s SSID manually Enter the security key and select OK If the selected network is not security enabled the TV attempts to connect right away Select Stop when the TV attempts to connect to the network Once the network connection has been interrupted select IP Settings In the IP Settings screen set the IP setting to Enter manually enter the IP Address Subnet Mask Gateway and DNS Server val
85. es or region MENU 123 gt MENU gt System gt Accessibility gt Voice Guide Voice Guide provides guiding information in voice to aid the visually impaired to use the TV more conveniently Enabling this option provides voice guide regarding focus change channel change volume change and various other TV statues Navigate to MENU 123 gt MENU gt System gt Accessibility gt Voice Guide and set Voice Guide to On A The Voice Guide is only provided in the language set in the Menu Language System gt Menu Language However some of the languages are not supported by Voice Guide even though they are listed in the Voice Guide screen If this is the case choose a different language To change the speaker s gender for the Voice Guide option navigate to MENU 123 gt MENU gt System gt Voice Recognition gt Use TV Voice and change the Voice Gender option The Voice Guide will give information for the following functions on the TV A Some sub functions or function menus may not provide Voice Guide In this case the TV will tell you that Voice Guide is not provided e Change Channels e Changing TV Volume e Programme Info Window Information e Channel List e Source e Guide e Voice Recognition e TV menu Changing the Volume Speed and Pitch of Voice Guide Navigate to MENU 123 gt MENU gt System gt Accessibility and then select Voice Guide Using the following functions you can configure the Voice Gui
86. es that use high power input 500mA or 5V may not be supported e The TV supports the FAT exFAT and NTFS file systems e After sorting files in the Folder view mode the TV can display up to 1000 files per folder If the USB device contains more than 8 000 files and folders however some files and folders might not be accessible e The PTP pier to pier connection mode is available only for digital cameras If you connect a smartphone or tablet to the TV using PTP mode the TV will not recognise It Be sure to connect a USB or external Hard Drive supporting USB 3 0 to the USB 3 0 port Certain files depending on how they were encoded may not play on the TV Certain files are not available depending on the model Supported External Subtitles A Certain files depending on how they were encoded may not play on the TV e o we pat Supported Internal Subtitles A Certain files depending on how they were encoded may not play on the TV a a me aa me a me Supported Image Formats and Resolutions A Certain files depending on how they were encoded may not play on the TV 15360x8640 Supported Music Formats and Codecs A Certain files depending on how they were encoded may not play on the TV FLAC FLAC Supports upto 2channels Supports upto 2channels to 2 channels Supports up to 10 Pro 5 1 channels wma WMA lossless audio is not supported Supports up to the M2 profile Supports type 0 and
87. et to On Read Before Using Voice Motion or Face Recognition 173 Precautions for Voice Motion and Face Recognition 175 Requirements for Using Voice Motion or Face Recognition Read Before Using SAMSUNG APPS Web Browser Restrictions Some countries areas don t support Web Browser Photo Video and Music File Limitations 181 Supported External Subtitles 181 Supported Internal Subtitles 182 Supported Image Formats and Resolutions 182 Supported Music Formats and Codecs 183 Supported Video Codecs Restrictions 185 Restrictions to PIP Picture in Picture Read After Installing the TV 185 Picture Sizes and Input Signals 186 Installing an Anti Theft Kensington Lock 186 Read Before Setting Up a Wireless Internet Connection Computer Connection Precautions 187 IBM 187 MAC 188 VESA DMT Supported Resolutions for Video Signals 189 CEA 861 Read Before Using Bluetooth Devices 190 Restrictions on using Bluetooth Licence Glossary Using Smart Hub Connecting to the Internet MENU 123 gt MENU gt Network gt Network Settings Connect the TV to the Internet wired or wirelessly cd u J O C CD gt Actual menu screen may differ depending on the TV model Setting up Smart Hub MENU 123 gt MENU gt Smart Hub gt Open Smart Hub Select Open Smart Hub to activate Smart Hub When you start Smart Hub for the first time the Set Up Smart Hub screen appears Follow the instructions on the screen
88. ever audio will not be heard while the video is paused Step Press If to scan through a video one frame at a time Slow Motion The gt gt button plays the video back at 1 2 the normal speed A Buttons that appear differ with the file being played Rewind Fast Forward Rewind or Fast Forward the recording file recorded programme Repeatedly select the button to make the rewind fast forward speed faster by up to 5 times To restore normal playback speed press the gt button Fast Forward is not available while you are watching a programme that is currently being broadcast Previous Next To play the previous file recorded programme press 44 twice Selecting 144 once reloads the current video from the beginning To play the next file recorded programme press gt gt I A This function is not available when the programme is recorded in Sports Mode Highlights Player Select Highlights Player to view highlights from the current recording A This feature is only available for programmes that were recorded in Sports Mode and along with highlight data have been saved Live TV This function enables the PIP feature so that you can watch a live programme through PIP A Channels cannot be changed A You can only use this function for programmes recorded in Sports Mode e Settings Function Subtitle Settings Picture Size Picture Mode Sound Mode Speaker List Audio Language Information Descri
89. g the screen may emit a faint glow and this may continue for more than 1 hour until the software download is complete If you agree to the Smart Hub terms and conditions Auto Update will be set to On If you don t want the TV s software updated automatically set Auto Update Support gt Software Update gt Auto Update to Off 1 Select Support gt Software Update gt Auto Update 2 Specify when you want the upgrade to take place The TV will connect to the server at the specified time download the update package and upgrade its own software Protecting the TV from Hacking and malicious code MENU 123 gt MENU gt System gt Smart Security When the TV is connected to the Internet it is vulnerable to hacks and malicious code Smart Security protects the TV and storage media connected to the TV from such threats Checking the TV and Connected Storage Media MENU 123 gt MENU gt System gt Smart Security gt Scan Navigate to MENU 123 gt MENU gt System gt Smart Security and select Scan This scans the TV and connected media for the presence of malicious code If no malicious code is detected a notification window appears on the screen If malicious code is detected If malicious code was found the results of the scan will appear on the screen This result window displays all malicious code found and provides options to either quarantine the code or allow them to continue 1 2 Select all malicious cod
90. g Logo while Booting 147 Enabling the TV to Boot Faster 147 Enabling Disabling the Front Indicators 147 Removing Flicker 148 UHD Evolution Kit Backup 149 Registering the TV as a DivX Certified Device Watching Paid DivX Movies 150 Restoring the TV to the Factory Settings 150 Turning the TV into a Display Model for retail stores Troubleshooting Getting Support 151 Support through Remote Management 153 Finding the Information You Need for Service There is a problem with the screen 153 Testing the Picture can t hear the sound clearly 156 Testing the Sound can t see 3D images clearly 157 Testing 3D Picture Quality There is a problem with the broadcast The computer won t connect can t connect to the Internet The Schedule Recording Timeshift function isn t working Anynet HDMI CEC isn t working am having trouble launching using apps My file won t play want to reset the TV Other Issues Notes and Precautions Before Using the Recording and Timeshift Functions 164 Before Using the Recording and Schedule Recording Functions 165 Before the Using Timeshift Function S Recommendation Disclaimer 166 S Recommendation with Voice Interaction 166 S Recommendation Before Using 3D Viewing Mode 167 3D Precautions Supported Resolutions for each 3D Mode 170 HDMI 171 Component 171 Digital Channel Supported Resolutions for UHD 172 If HDMI UHD Color is set to Off 172 If HDMI UHD Color is s
91. gistered face is used by the Sign in Method e Choosing a Samsung Account Login Method for TV Select Sign in Method on the login screen and choose a login method You can determine how to log into the TV with the saved Samsung Account e Setting Auto Login Check the Sign me in automatically option if you wish to log into Smart Hub automatically e Entering Basic User Information You can enter your given name surname and date of birth e Receiving e mail about Samsung services You can determine whether to receive e mail about Samsung services Containing the latest information Deleting All Samsung Accounts from the TV MENU 123 gt MENU gt Smart Hub gt Samsung Account gt Remove Accounts from TV Navigate to MENU 123 gt MENU gt Smart Hub gt Samsung Account and select Remove Accounts from TV The account and password information saved on the TV is deleted and the account information of any linked apps are also deleted To delete your account information you must be signed in with your Samsung Account Using the NewsON Panel gt gt Featured gt NewsON A Actual menu screen may differ depending on the TV model Y This service or some of functions of it may be not available in some countries or region NewsON provides a real world service that informs users of news and weather related information in one place without the need for a newspaper smartphone or computer NewsON users can find daily informati
92. gs gt Digital Text You can use this function when you watch a broadcast that includes both text and multimedia content A The Digital Text function may not be supported depending on the region Ifthe programme broadcasts with digital text this feature is enabled MHEG Multimedia and Hypermedia Information Coding Experts Group An International standard for data encoding systems used in multimedia and hypermedia This is at a higher level than the MPEG system which includes data linking hypermedia such as still images character service animation graphic and video files as well as multimedia data MHEG is user runtime interaction technology and is being applied to various fields including VOD Video On Demand ITV Interactive TV EC Electronic Commerce teleeducation tele conferencing digital libraries and network games Changing the Picture Mode and Adjusting the Picture Quality Choosing the Right Picture Mode for the Viewing Environment MENU 123 gt MENU gt Picture gt Picture Mode AND The following picture modes utilize different contrast and brightness settings to provide the best viewing experience for the environment 4 When connected to a PC via an HDMI HDMI DVI cable only the Standard and Entertain modes can be chosen Picture Mode will be unavailable in Sports Mode Dynamic If the ambient lighting is too bright and makes the screen blurry use this mode to make the picture clearer Standard Th
93. gt Sleep Timer This automatically shuts off the TV after a preconfigured period of time Select System gt Time gt Sleep Timer You can set the timer up to 180 minutes in 30 minute increments Turning On the TV using On Timer MENU 123 gt MENU gt System gt Time gt On Timer Set the On Timer so that the TV turns on automatically at a chosen time Select System gt Time gt On Timer The timer configuration window appears Configure the following settings The On Timer is only available if the Clock has been set Setup Specify the dates and the duration Use Manual to specify the days of the week Time Set the time that the TV turns on automatically Volume Specify the volume when the TV turns on Source Select the signal source from the list Specify the channel or source to be displayed when the TV turns on To specify a USB device a USB device must first be connected to the TV To play media from an HDMI or Component source such as a DVD player or Blu ray player the device must already be turned on and playing the media when the TV is turned on e Aerial Set the Source to TV to select a broadcast signal e Channel Set the Source to TV to select a channel e Music Photo Set the Source to USB to choose a USB folder that contains music or photo files Selecting both music and image files plays the music files and displays the images at the same time Restrictions e If the folder that you choose has s
94. he TV Select an icon to perform the associated action or function A Actual menu screen may differ depends on the specific model and area Direction Control Mode Motion Pointing Mode Icon Description Displays the On Screen Remote Displays the channel list or information about the current programme Launches Smart Hub Allows you to adjust the volume or select the speakers to use Allows you to adjust the volume change the current channel or change the motion control layout in Motion Pointing mode Showing the hidden icons on Smart Hub The motion control icons disappear when there is no user action on Smart Hub for 2 or more seconds To show the hidden icons move the pointer to the top or right side of the screen The green areas as shown in the figure appear Wait for 1 second The icons reappear A Actual menu screen may differ depends on the specific model and area Icon Description Direction Control Motion Pointing Signing in with Face Recognition A Availability depends on the specific model and area Users can register their faces using the TV camera and sign in with their Samsung accounts through Face Recognition One face may be registered per account Depending on the ambient illumination level and or shadows over the face the TV may have difficulty recognising the user s face A Please read through the instructions before using Face Recognition For more information refer to Read Befo
95. he recommended range the 3D glasses lose wireless wireless communications with the TV If this occurs the 3D display turns off and a few seconds later the glasses turn off The 3D glasses may not work properly if there are any nearby active 3D devices or electronic or wireless communication devices for example a device that uses the 2 4GHz frequency range such as a microwave or AP If this occurs move the devices away from the 3D glasses The Samsung Multi View 3D Glasses may not work properly near metal objects or near an electromagnetic field If this occurs move the metal objects or the electromagnetic device away from the 3D glasses The vividness of the image may degraded if you watch a 3D movie in a location exposed to direct sunlight or illumination The temples of the 3D glasses do not fold Do not attempt to fold the temples You can damage the 3D glasses A When watching 3D content for an extended period of time without averting your eyes the 3D glasses may turn off automatically Take off the 3D glasses and put them on again if they do not work in 3D viewing mode first Caution 3D Health and Safety Information Users are required to read the following information before using 3D A supervising adult should check on any children watching 3D TV regularly Children experiencing eye fatigue headaches dizziness and or nausea while viewing 3D TV should stop watching immediately Do not use the 3D glasses for any pu
96. he screen moves to the frame you want Press the POINTER button to select numbers Only use for Samsung Smart Control For general remote control enter the numbers directly Availability depends on the specific model and area 4 The TV attempts to connect to the network again using the specified settings A confirmation message appears once a connection is established Select OK A The network connection speed may differ depending on the DNS server settings A For details on the DNS server settings contact your Internet service provider ISP Establishing a Wireless Internet Connection Connecting the TV to the Internet gives you access to online services and SMART features and lets you update the TV s software quickly and easily through the Internet Va ee wivivi A a Connecting to a Wireless Internet Network Automatically MENU 123 gt MENU gt Network gt Network Settings Connect the TV to the Internet via a wireless router Make sure you have the wireless router s SSID name and security key settings before attempting to connect The security key can be found on the wireless router s configuration screen 1 On the Network Settings screen set Network Type to Wireless The TV automatically displays a list of available wireless networks 2 Select a network SSID If the network you want doesn t appear in the list select Add Network and enter the network s SSID manually 3 Ent
97. hen select Refresh This initiates a scan for available keyboards again Select the Bluetooth keyboard from the scan list and then select Pair and connect A number appears on the screen Enter the number on the Bluetooth keyboard A Select Yes to change the keyboard s options or No to leave them as they are Using the Keyboard Use the following remote features with the USB or Bluetooth keyboard connected to the TV Keyboard Remote Control Functions Arrow Keys Move the Focus Windows Key Open the Menu Menu List Key Open the On Screen Remote Enter Key Select Item Run Item ESC RETURN button Number Keys Enter Numbers Page up Page down Scroll web browser pages up and down F1 F2 B F3 F4 ey F5 3 F6 SOURCE F7 Launch the Channel List F8 C4 button F9 F10 Volume button F11 F12 Channel button The Options menu depends on the context Input Languages Keyboard Type and Switch Language Key Select System gt Device Manager gt Keyboard Settings gt Keyboard Options The following options are available e Keyboard Language If the keyboard supports multiple languages choose which language you want to use from the list e Keyboard type Specify the type of language selected under Keyboard Language A The Keyboard type list varies depending on which language was selected under Keyboard Language e Switch Input Language If the keyboard supports multiple languages choose from the list which key to use to switch between la
98. indrical button type battery can cause serious damage to your internal organs If this happens contact a doctor immediately Keep old batteries out of the reach of children to prevent children from swallowing them If they swallow them consult a doctor immediately Supported Resolutions for each 3D Mode e These specifications apply to the 16 9 display ratio only HDMI 3D Mode 8 L R H T B 1280 x 720p 1920 x 1080i 50 60 1920 x 1080p 24 25 30 50 60 3840 x 2160p 24 25 30 50 60 3D Mode Eq Horizontal Line K Vertical Line EY Pixel K Frame 1920 x 1080i 50 60 1920 x 1080p 25 30 Component 1280 x 720p 59 94 60 1920 x 1080 59 94 60 1920 x 1080p 23 98 24 29 97 30 59 94 60 Digital Channel a asl 1280 x 720p 59 94 60 1920 x 1080 59 94 60 Videos Photos Refer to the Photo Video and Music File Limitations section Computer via HDMI Cable The optimal resolution for computers connected to the TV via an HDMI cable is 1920 x 1080 If you select another resolution the TV may not display 3D images correctly and may not be able to display the computer video in full screen Supported Resolutions for UHD e Resolution 3840 x 2160p 4096 x 2160p A The HDMI connector with HDMI UHD Color set to Off supports up to UHD 50P 60P 4 2 0 while the HDMI connector with HDMI UHD Color set to On supports up to UHD 50P 60P
99. ing a game or using the karaoke feature on the main screen can result in lower PIP picture quality e PIP is not supported in UHD source SCART IN Component A This function is dependent on the specific model and area Read After Installing the TV Picture Sizes and Input Signals Analogue channel Composite 16 9 Zoom1 Zoom2 4 3 Digital channel 1080i 1080p 16 9 Wide Fit 4 3 Fit to screen Smart View 2 HDMI 720p 1080i 1080p 16 9 Wide Fit a e Smart View 1 HDMI 4096 x 2160p 16 9 Fit to screen The Picture Size setting is applied to the current source The applied Picture Size will remain in effect whenever you select that source unless you change it A The Picture Size option is not available for images in the UHD resolution because the supported screen size is fixed Installing an Anti Theft Kensington Lock A Kensington Lock is a physical device that can be used to protect the TV against theft Look for the Kensington slot on the back of the TV The slot has a A icon next to it To use the lock wrap the lock cable around an object that is too heavy to carry and then thread it through the TV s Kensington slot The lock is sold separately The method of using a Kensington Lock may differ for each TV model Refer to the Kensington Lock manual for more information Read Before Setting Up a Wireless Internet Connection Wireless Internet Precautions e This TV supports the IEEE 802 11a b g n com
100. ing in 3D MENU 123 gt MENU gt Picture gt 3D The 3D option lets you view 3D media content and broadcasts You will need to wear Samsung 3D Active Glasses to play 3D content IR tyoe Samsung 3D Active Glasses and third party 3D glasses are not supported E manual cannot be used when TV is set in 3D mode Carefully read the health and safety information concerning 3D viewing before viewing 3D content Refer to the 3D Precautions section for more information Whether 3D video is displayed in true HD is usually determined by the quality of the content Starting 3D 1 Play 3D content or turn on a channel that s showing a 3D broadcast 2 Put the Samsung 3D glasses on and then select 3D 3D viewing is enabled The ideal viewing distance is three times the height of the screen or more 3D images may not appear if you do not adhere to the recommended viewing angle or distance The 3D feature may not work properly if there is another 3D product or an electronic device running nearby If there is a problem keep other electronic devices as far away as possible from the 3D Active Glasses The left and right 3D images may initially overlap when the TV is turned on It takes a moment for the display to optimise for the overlapping to go away There are several restrictions when using 3D TV e Launching Smart Hub automatically disables 3D mode e PIP cannot be used e Certain Picture options are disabled Changing the 3D Mode
101. is is the default mode suitable for most environments Natural This mode is useful for reducing eye strain Movie Appropriate for darkened rooms for watching movies and when experiencing eye fatigue Darkens the screen and reduces glare Entertain Sharpens images for a more dynamic viewing experience A This mode is only available when connected to a computer via an HDMI HDMI DVI cable Stadium When you turn Sports Mode MENU gt System gt Sports Mode to On Picture Mode is set to Stadium automatically to configure the picture settings suitable to sports events Adjusting the Picture Quality for Each Picture Mode MENU 123 gt MENU gt Picture gt Backlight Contrast Brightness Sharpness Colour or Tint G R Select one of the settings to display its slide bar Change the adjustment value using lt gt Change the item using A V Adjusted values are applied to the current source and picture mode A The Colour and Tint G R settings cannot be adjusted when the TV is connected to a computer via an HDMI HDMI DVI cable Choose a Picture Mode and then adjust the settings e Backlight Gey Adjusts the brightness of individual pixels Decreasing the brightness reduces power consumption e Contrast Adjusts the screen contrast e Brightness Adjusts the overall brightness e Sharpness Sharpens or dulls the edges of objects Colour GED Adjusts the overall colour saturation e Tint G R Ad
102. it has been replaced e A USB hard drive with a speed of 5 400rom or above is recommended However RAID type USB hard drives are not supported e USB memory sticks are not supported e The total recording capacity may vary depending on the amount of available hard drive space and the recording quality level e Schedule Recording requires at least 100MB of free space on the USB storage device Recording will stop if the available storage space falls below 50MB while recording is in progress e If the available storage space falls below 500MB while both the Schedule Recording and Timeshift functions are in progress only the recording will stop e he maximum recording time is 360 minutes e A video is played according to the TV settings e If the input signal is changed while recording is in progress the screen will go blank until the change is made In this case recording will resume but will not be available e Device Performance Test must be performed on the USB storage device connected to the TV before a recording can be made To perform the Device Performance Test select USB Drive in the MY CONTENT panel and then select the recording device When you make a recording on the Guide or Programme Info screen if the USB storage device has failed in the Device Performance Test the Format Device and Device Performance Test are performed again e When using the Record or Schedule Recording function the actual recording may start a
103. ize Select the PIP sub picture size e Position Select the PIP sub picture position e Sound Select Select the audio source PIP restrictions e PIP cannot be used while Smart Hub or 3D is active e Turning off the TV automatically disables PIP e Playing a game or using the karaoke feature on the main screen can result in lower PIP picture quality e For PIP to work the main screen s source must be Component or HDMI and the input resolution must be less than Full HD FHD 1080p The sub picture supports TV source only e he PIP window supports digital channels only Scanning for Available Channels MENU 123 gt MENU gt Broadcasting gt Auto Tuning Automatically scans and indexes all channels received through the TV s antenna input connector e If there are saved channels this feature deletes the existing list and then saves the newly scanned channels If the TV is connected to a cable box you do not need to do this 1 Select Broadcasting gt Auto Tuning 2 Select Start when prompted This initiates the Auto Programme function The process can take up to 30 minutes to complete e Auto Tuning Scans for channels automatically and stores them in the TV s memory e Cable Search Option when the aerial was set to Cable Availability depends on the specific model and area Sets additional search options such as the frequency and symbol rate for a cable network search Selecting the Broadcast Audio Options MEN
104. justs the ratio of green to red Increase the green value to saturate the greens and the red value to saturate the reds A Adjusted values are saved by the TV for the current source and picture mode and remain in effect each time the source and picture mode are selected Consequently the TV can have different picture settings for each external source G The Colour and Tint G R settings cannot be adjusted when the TV is connected to a computer via an HDMI to DVI cable Applying the Current Picture Settings to Other Input Sources MENU 123 gt MENU gt Picture gt Apply Picture Mode You can apply the picture quality setting that you configured for the TV to all external devices connected to the TV or to the current source only To apply the setting to all external devices connected to the TV select All Sources To apply the setting to the current input only select Current Source Fine Tuning Each Picture Mode Advanced Settings MENU 123 gt MENU gt Picture gt Advanced Settings Select Picture gt Advanced Settings to fine tune how images are displayed on the TV screen for each Picture Mode A Advanced Settings is only available when the Picture Mode is set to Standard or Movie G When the TV is connected to a computer via an HDMI DVI cable only White Balance and Gamma can be adjusted Choose a Picture Mode and then adjust the settings Dynamic Contrast QAND Automatically adjusts the screen contrast Use this
105. l speakers Speaker Settings Plays the music through a speaker that you want Sound Mode Changes the sound mode during playback when you play the music through the TV speakers Sound gt Sound Mode Screen Off Plays the music files only with the screen off Listening to music in HD quality You can enjoy HD music in HD native quality Move to MY CONTENT service and select a music file to play in HD quality Y a amp B x x x Set HD Audio MENU 123 gt MENU gt Sound gt Additional Settings gt HD Audio to On before playing HD Audio format HD icon is displayed next to HD music files in the playlist Select the music file and then select to play it When you set HD Audio mode to Off during playback the next music file is played with standard audio signals When you play an HD music file while the Multi Link Screen is running Multi Link Screen is automatically terminated Standard audio signals are sampled at 48 kHz while HD audio signals are sampled at 96 kHz Some S PDIF receivers may not be compatible For such incompatible receivers deactivate HD Audio mode and use normal audio mode instead Some external audio players connected via HDMI Bluetooth or Wi Fi networks are not able to play the HD audio signals Functions on the media content list screen You can use the following functions on the media content list screen of a storage device e Filter By Filters the media conten
106. lect e Selecting a speaker device for a Multi Link Screen Place a finger on the POINTER button and then select the Volume icon at the left side of the TV s screen Select Multi Link Screen from the speaker device list Select a soeaker device either TV Speaker or Bluetooth Headphones for each Multi Link Screen A On the standard remote control press the TOOLS button and select Speaker List in the Tools menu Select Custom to set the speaker type for the left or right speaker Read before using Multi Link Screen Before using Multi Link Screen make sure the TV is connected to the Internet A UHD content and channels cannot be viewed simultaneously A Certain TV features and apps may not be supported by Multi Link Screen If this is the case exit from Multi Link Screen and then use the feature A You can hear the selected audio while you are using the Multi Link Screen and you can hear the other screen s audio through the Bluetooth headphones A The Timeshift function is not available when Multi Link Screen is running For more information refer to Using Timeshift Smart Hub MENU 123 gt MENU gt Smart Hub gt Open Smart Hub Select opening the Smart Hub the Mini Smart Hub interface will appear Place a finger on the POINTER button to display the pointer on the screen You can choose the item you want With Smart Hub you can surf the web download apps and stay in touch with family and friends through social net
107. ling the TV with Your Motion Setting up Motion Control Availability depends on the specific model and area MENU 123 gt MENU gt System gt Motion Control Perform Motion Control Environment Test then finish the settings required to run motion control such as how to adjust Pointer Speed and whether to show Animated Motion Guide System Setup Sports Mode Menu Language English Smart Security Universal remote setup Voice Recognition Motion Control A Your TV s menu may differ from the image above depending on the model Controlling the TV using motions MENU 123 gt MENU gt System gt Motion Control gt Motion Control 1 Z b k Set Motion Control to On Face the TV camera raise your hand to a comfortable position and then move your index finger to the left or right slowly with it fully extended upwards Move your hand left or right slowly to move the pointer to a function Curl your index finger down to select a function and then raise it again to run the selected function Your TV s menu may differ from the image above depending on the model This function is only available on certain models in specific geographical areas Motion Control is available in either direction control or motion pointing mode 9800 models need to be connected to the TV camera in order to use Motion Control For more information refer to TV Control using Motions Using the Samsung Smart Control Operati
108. list set TV to Allowed Launch Windows Media Player from the computer select Settings gt Library Management and then add the location where the photo video and music files are saved to view play the files on the TV screen A It will be possible to view play on the screen files moved to Windows Media Player s default folder A As long as File Sharing is activated unauthorised access may be allowed Disable File Sharing if data access is not required Connecting with a Mobile Device Connect mobile device such as a smartphone or tablet to the TV directly or indirectly over a shared network and display the mobile device screen or content on the TV screen Connect the mobile device to the TV as follows Connecting with MHL to HDMI Cable Connect the mobile device s USB port to the TV s HDMI port with the MHL to HDMI cable to view the mobile device screen on the TV Mobile Device Screen on TV Screen Mirroring Wirelessly connect the TV to the mobile device with the mirroring function to view the mobile device s screen on the TV A This option is available only with mobile devices that support mirroring Connecting Mobile Devices without a Wireless Router Wi Fi Direct Wi Fi Direct enables you to connect the TV to a mobile device without a router or AP Quickly access and play photo video and music files from a connected mobile device on the TV screen A This option is available only with mobile devices that support Wi Fi Di
109. lity ratings If the Index Table is wrong the Seek Jump function does not work When playing video over a network connection the video may not play smoothly because of data transmission speeds Some USB digital camera devices may not be compatible with the TV HEVC codec is only available in MKV MP4 TS containers Video Decoders H 264 FHD is supported up to Level 4 1 does not support FMO ASO RS H 264 UHD is supported up to Level 5 1 HEVC FHD is supported up to Level 4 1 and HEVC UHD is supported up to Level 5 1 VC1 AP L4 is not supported All video codecs excluding WMV v7 v8 MSMPEG4 v3 MVC and VP6 Below 1280x720 60 frame max Above 1280x720 30 frame max GMC 2 or above is not supported Supports SVAF Top Bottom Side by Side and Left Right view sequence type 2ES only Supports BD MVC specs only Audio Decoders WMA is supported up to 5 1 channels Supports up to the M2 profile This does not support WMA lossless audio QCELP and AMR NB WB are not supported Vorbis is supported for up to 5 1 channels Dolby Digital Plus is supported for up to 5 1 channels The DTS LBR codec is only available for MKV MP4 TS containers The supported sample rates are 8 11 025 12 16 22 05 24 32 44 1 and 48 KHz and differ by the codec Restrictions Restrictions to PIP Picture in Picture e PIP cannot be used while Smart Hub or 3D is active e Turning off the TV automatically disables PIP e Play
110. lly after completing the software upgrade All video and audio settings return to the default settings after a software upgrade Updating Software using a USB connection MENU 123 gt MENU gt Support gt Software Update gt Update now 1 Visit Samsung s website on a computer and download the update package to a USB device A Save the update package in the USB device s top level folder Otherwise the TV will not be able to locate the update package 2 Connect the USB device with the update package to the TV Select Support gt Software Update gt Update now The software is updated using the update package on the USB device A DO NOT turn off the TV s power until the upgrade is complete The TV will turn off and on automatically after completing the software upgrade All video and audio settings return to the default settings after a software upgrade Enabling Automatic Software Updates MENU 123 gt MENU gt Support gt Software Update gt Auto Update If the TV is connected to the Internet the Auto Update option upgrades the TV s software while it is in Standby Mode In Standby Mode the TV appears to be turned off but still has access to the Internet This allows the TV to upgrade itself automatically while it is not in use This option requires an Internet connection A This function may take a longer time if a different networking function is running concurrently Because the TV s internal processes are operatin
111. ly pull on the battery cover s notch and then remove the cover completely once it comes loose 2 Insert 2 AA alkaline batteries making sure to align the positive and negative polarities correctly Place the battery cover on the remote control and insert the top part of the cover into the remote control 4 Press the catches on both sides of the battery cover in the order shown so that the cover is completely attached to the remote control When you see this alarm icon on the screen Following alarm icon indicates Samsung Smart Control s batteries are low If the alarm icon pops up replace the batteries Samsung recommends using alkaline batteries for a longer operating life 7s lt Low Battery Alarm Icon gt Actual menu screen may differ depending on the TV model Pairing Samsung Smart Control To control the TV with Samsung Smart Control you need to pair Samsung Smart Control to the TV via Bluetooth Samsung Smart Control can only be paired to a single TV 1 Point Samsung Smart Control at the remote control sensor of the TV and press the 5 button to turn the TV on amp i Y Remote control receiver s location may vary depending on the model 2 The Bluetooth icon will appear on the screen as shown below The TV will then attempt to connect to the Samsung Smart Control unit automatically lt Connection attempt and completion icons gt Actual menu screen may differ depending on the TV model Reconnecting
112. mendation require internet access and may not be available based on service provider language dialect and region Visit www samsung com for more information about service operator compatibility Actual remote control may differ from image shown Before Using 3D Viewing Mode 3D Precautions A Warning In 3D viewing mode the screen may flicker under florescent lighting 50Hz 60Hz or three wave lighting A If this occurs turn off the lighting or adjust it to a low level When you switch the picture mode from 3D view the 3D view mode turns off and the 3D glasses no longer provide a 3D view A When you turn off 3D mode the 3D glasses also turn off in a few moments If you are watching TV with 3D glasses and you lie on your side the picture may look darker or may not be visible If the 3D glasses are defective or damaged they cannot be repaired and need to be exchanged for a new pair The repair service is free of charge within the warranty period Note that the warranty does not cover damage caused by the user The actual 3D effect may be experienced differently depending on the viewer The 3D effect may not be experienced by persons who has a large difference of vision between the left and right eyes In 3D viewing mode watch TV within the recommended distance A The 3D functionality of the glasses may not work properly if you move out of the recommended range for about 3 seconds or more A If you stay outside t
113. more registered faces a list of corresponding accounts appears Select the appropriate account If the TV detects an unregistered face it displays Unregistered on the screen Digital Broadcast Information at a Glance MENU 123 gt MENU gt Broadcasting gt Guide The Guide provides an overview of each digital channel s programme lineup You can check the programme schedules and set up a Schedule Viewing or Schedule Recording Press MENU 123 to display virtual remote control on screen and press GUIDE to launch the guide G The information in the Guide is for digital channels only Analogue channels are not supported To view the Guide you must first set the TV s clock MENU gt System gt Time gt Clock Using the Guide To access the Guide functions after launching the Guide press and hold the Enter button on the remote control A popup window listing the following functions appears e Navigating the Programme Schedule Press to the 44 gt gt button on virtual button to navigate the programme schedule by 24 hours You can only view the future programme schedule It is available for moving the page using the A v button Move to the programme schedule and then press and hold the Touchpad Enter button The following options are available e Changing the Channel List If you select Channel Filter you can change the channels displayed in the channel lists e Moving to the Schedule Manager You can move to the Sch
114. munication protocols Samsung recommends using IEEE 802 11n Video files stored on a device connected to the TV via DLNA may not play back smoothly e To use wireless Internet the TV must be connected to a wireless router or modem If the wireless router supports DHCP the TV can use a DHCP or static IP address to connect to the wireless network e Select a channel that is not currently in use for the wireless router If the channel set for the wireless router is currently being used by another device the result is usually interference and or a communications failure e Most wireless networks have an optional security system To enable a wireless network s security system you need to create a security key using characters and numbers This security key is then needed to connect to a security enabled AP Wireless Security Protocols The TV only supports the following wireless network security protocols and is unable to connect to non certified wireless routers e Authentication Modes WEP WPAPSK WPA2PSK e Encryption Types WEP TKIP AES In compliance with the newest Wi Fi certification specifications Samsung TVs do not support WEP or TKIP security encryption in networks running in the 802 11n mode If the wireless router supports WPS Wi Fi Protected Setup you can connect the TV to your network using PBC Push Button Configuration or a PIN Personal Identification Number WPS automatically configures the SSID and WPA key settings
115. ng Account A Availability depends on the specific model and area Linking an App Account 1 Navigate to MENU 123 gt MENU gt Smart Hub gt Samsung Account and select Link Service Accounts A list of apps that can be linked to your Samsung Account is shown Select an app from the list The Link to other accounts window appears on the screen 3 Enter the current ID and password of the app to log in When the login is complete the app account is linked to the Samsung Account Disconnecting a Linked Account 1 Navigate to MENU 123 gt MENU gt Smart Hub gt Samsung Account select Link Service Accounts Select an app to unlink 2 A confirmation dialog box appears Select Yes to unlink the app Changing and Adding Information to Samsung Account MENU 123 gt MENU gt Smart Hub gt Samsung Account Using the Samsung Account menu you can manage your Samsung Account G To change the account information you must be logged into your Samsung Account 1 Navigate to MENU 123 gt MENU gt Smart Hub gt Samsung Account and select Edit profile 2 Enter the password and then select Done The edit profile screen appears The profile editing screen provides the following features e Changing Profile Image If you select picture on the login screen you can change the profile image e Registering Your Face to Samsung Account If you select picture on the login screen you can register your face to your Samsung Account The re
116. ng by adjusting camera power line frequency UHD Evolution Kit Backup MENU 123 gt MENU gt System gt UHD Evolution Kit Backup Upgrade your Samsung TV with the 2016 Evolution Kit for more benefits However this upgrade requires backing up and converting existing data in your TV and apps accordingly to ensure they remain on the upgraded device 7 Connect a USB storage device to the TV 2 In the System menu select UHD Evolution Kit Backup The UHD Evolution Kit Backup screen appears 3 Select Start Data in the TV will be backed up to the USB storage A Do not turn the TV off or unplug the power cable of the TV during this backup A Do not disconnect the USB storage device during this backup 4 When complete select Done Registering the TV as a DivX Certified Device Watching Paid DivX Movies MENU 123 gt MENU gt System gt DivX Video On Demand Viewing DivX DRM protected DivX movies on the TV first requires registration of the TV as a DivX certified device D aA amp DRM Digital rights management Digital Rights Management is a digital security measure designed to protect copyright You can watch personally created and free DivX content without registering the TV Visit the DivX website http www divx com and log into your user account before registering the TV as a DivX certified device If you do not have an account please create one Select System gt DivX Video On Demand A window with
117. ng the Auto Tuning function Adjust the cable box s video output resolution to 1080i or 720p The compression of video content may cause picture distortions especially in fast moving pictures from sports programmes and action movies A weak or bad quality signal can cause picture distortions This is not an issue with the TV Mobile phones used close to the TV within 1 m may cause noise in analogue and digital channels The Problem The colour is wrong or missing The colour is poor or the picture is not bright enough There is a dotted line on the edge of the screen The picture is black and white When changing channels the picture freezes or is distorted or delayed Try this If you re using a Component connection make sure that the Component cables are connected to the correct jacks Incorrect or loose connections may cause colour problems or a blank screen Go to the Picture menu and then adjust the Picture Mode Brightness Sharpness and Colour settings See if Energy Saving System gt Eco Sensor gt Energy Saving has been enabled Try resetting the picture Picture gt Reset Picture If the Picture Size has been set to Fit to screen change the setting to 16 9 Change the cable box resolution If you are using AV composite input connect the video cable yellow to the TV s green component jack If the TV is connected to a cable box try to reset the box Disconnect and then reconnect the AC
118. ng the TV with the POINTER button A Actual menu screen may differ depending on the TV model Place a finger on the POINTER button and move the Samsung Smart Control The pointer on the screen moves in the direction you moved the Samsung Smart Control Move the pointer to one of the following icons on the screen and then press the POINTER button e gt Displays the On Screen Remote e Allows you to adjust the volume or select speakers e Displays the channel list e Launches Smart Hub Setting up the Samsung Smart Control MENU 123 gt MENU gt System gt Smart Control Settings Set Motion Sensitivity and Firmware Update of the Samsung Smart Control System aN Universal remote setup Voice Recognition Motion Control Time Notifications Device Manager Smart Control Settings A Your TV s menu may differ from the image above depending on the model Pairing the TV to the Samsung Smart Control When you turn on the TV the Samsung Smart Control is paired to the TV automatically To re pair it to the TV press the and buttons on the Samsung Smart Control simultaneously for 3 seconds or more A Actual menu screen may differ depends on the specific model and area Improving the Viewing Experience of Sports Events Activating Sports Mode MENU 123 gt MENU gt System gt Sports Mode Set Sports Mode to On System Accessibility Setup Menu Language English Smart Security Univer
119. nguages Controlling the TV with a Mouse MENU 123 gt MENU gt System gt Device Manager gt Mouse Settings This TV can be operated with ease using a mouse instead of a remote control A Certain models do not support USB HID class mice Connecting a Mouse Connecting a USB Mouse Plug the mouse cable into the One Connect s USB port A connection message appears on the screen Connecting a Bluetooth Mouse A Availability depends on the specific model and area 71 Place the Bluetooth mouse in standby status Refer to the mouse manual for information on putting the mouse in standby status 2 Select System gt Device Manager gt Mouse Settings gt Add Bluetooth Mouse The Add Bluetooth Mouse screen will appear and automatically scan for available mice 3 Select the Bluetooth mouse from the scanned list and then select Pair and connect This pairs the Bluetooth mouse with the TV Using the Mouse Once a USB or Bluetooth mouse is connected to the TV a pointer will appear on the TV s screen You can use this pointer to control the TV as you would a computer e Selecting and Running an Item Left click on the mouse e Displaying the Volume Mute and Channel Buttons Select the volume channel icon on the screen while watching TV Use the onscreen buttons to adjust the volume or switch the channel A Select the volume channel icon again to hide the buttons e Scrolling the TV Menu or Screen Move the mouse wheel up
120. nnected to the TV using the TV s remote control Y You can also use the Anynet HDMI CEC function to operate some external Samsung devices with your TV s remote control without any additional setup Refer to the Using Anynet HDMI CEC section for more information Certain external devices connected to the TV may not support the universal remote feature Setting Up the Universal Remote Control 1 2 3 Turn on the external device you want to control with the universal remote function Press the SOURCE button on your remote to bring up the Source screen Select the Universal remote setup A You can also start Universal remote setup through the TV s menu Select System gt Universal remote setup Follow the directions on the screen to complete the set up and register the device The directions will be different depending on the device you want to control A If the external device does not respond after being registered register it again using its model number A The TV memorises both the external device and the connection HDMI 1 HDMI 2 etc the device is connected to Once set up is complete and you have confirmed that you can use the TV remote to control the device disconnect the IR extender cable from the TV and set it aside If you ran set up using the Samsung Smart Control You can now control the device directly with the Samsung Smart Control Universal Remote Features 1 Press SOURCE to go to the Sou
121. o the Internet Some Smart Hub features may not be available depending on the service provider language or region Smart Hub service outages can be caused by disruptions in your Internet service To use Smart Hub you must agree to the end user agreement and privacy policy Otherwise you will not be able to access the features and services associated with them You can view the entire text of the Terms amp Policy by navigating to MENU gt Smart Hub gt Terms amp Policy If you want to stop using Smart Hub you can cancel the agreement To view help information about Smart Hub select the button Using Smart Hub with Samsung Account Samsung Account Create Account A Actual menu screen may differ depending on the TV model Creating a Samsung Account MENU 123 gt MENU gt Smart Hub gt Samsung Account Some Smart Hub services are paid services To purchase such a service the service provider account or Samsung Apps TV account Samsung account is required You can create a Samsung Account using your email address A To create a Samsung Account you must agree to the Samsung Account end user agreement and privacy policy Otherwise you cannot create a Samsung Account You can view the entire content of the agreement by navigating to MENU 123 gt MENU gt Smart Hub gt Samsung Account gt Terms and Conditions Privacy Policy If you don t wish to use a Samsung Account anymore you can withdraw the agreement Y
122. o to be heard through an AV receiver With receivers that support ARC however digital audio can be transmitted via the HDMI cable only DVI Digital Visual Interface Connecting the TV s DVI connector to a computer s DVI connector via an HDMI to DVI cable lets you use the TV as a computer monitor However HDMI to DVI cables deliver video signals only You must connect a set of speakers to the computer using a separate cable to hear the computer s audio HDMI High Definition Multimedia Interface HDMI is a method of transmitting both video and audio signals via a single cable Dynamic versus Static IP Addresses If the network requires a dynamic IP address use an ADSL modem or router that supports the Dynamic Host Configuration Protocol DHCP Modems and routers that support DHCP automatically provide the IP address subnet mask gateway and DNS values the TV needs to access the Internet so they do not have to be entered manually Most home networks use a dynamic IP address If the network requires a static IP address enter the IP address subnet mask gateway and DNS values manually when setting up the network connection To get the IP address subnet mask gateway and DNS values contact your Internet Service Provider ISP If the network requires a static IP address use an ADSL modem that supports DHCP ADSL modems that support DHCP also allow static IP addresses Ethernet Ethernet is a LAN Local Area Network that uses coa
123. ode Select e Manual The e Manual loads 2 Select a category from the side of the screen Once a selection has been made the contents of the selected category appear 3 Select an item from the list This opens the e manual on the corresponding page If a description doesn t fit on a single screen You can scroll pages in one of the following ways e Position the focus on the buttons showing on the screen e Press the A V buttons on Samsung Smart Control to use the scrolling function Additional e Manual Features Loading Pages using Keywords Select Search from the side of the screen to bring up the search screen Enter a search term and then select Done Select an item from the search results to load the corresponding page Loading Pages from the Index Page Select Index from the side of the screen to bring up the index screen Select a keyword from the list to navigate to the relevant page Using History to Load Previously Read Pages Select Recent pages from the side of the screen A list of previously read pages is shown Select a page The e Manual Jumps to the selected page Accessing the Menu from the e Manual Try Now Select Try Now on a feature description to directly move to the corresponding menu and try out the feature If you want to read an e Manual entry on a specific screen menu feature press the MENU 123 button and select e Manual using Samsung Smart Control A Certain menu options cannot be
124. of the reach of children so that they do not swallow them If they swallow them consult a doctor immediately Do not spray water or detergent directly onto the product to clean it This may result in fire electric shock damage to the exterior and or the removal of the markings Do not apply chemicals containing alcohol solvent or surfactant such as wax benzene thinner pesticide air freshener lubricant or cleaner to the product These chemicals may cause the product s exterior to become discoloured or cracked or labels or instructions to be removed Use only a soft cloth made from superfine fibers or cotton flannels for cleaning the product as the surface or the lenses can easily crack Because the product is easily scratched by a foreign substance make sure to dust off the cloth before using it Do not sleep while wearing the 3D glasses Wearing the 3D glasses while sleeping may damage them Do not disassemble repair or modify the 3D glasses yourself Do not use a product that is damaged Take care that you do not injure your eyes with the edges of the frame of the 3D glasses when wearing them Put the 3D glasses on and take them off with both hands Use only approved batteries and make sure to insert the batteries in the correct polarities If the batteries are inserted in the wrong polarities the batteries may explode or leak internally which may result in fire injury or contaminate the environment Swallowing the cyl
125. on Requirements for Using Voice Recognition Voice recognition and the Turn TV On voice command should be used within 4m of the TV A Availability depends on the specific model and area The voice recognition rate varies depending on the volume tone pronunciation and ambient sound environment TV sound and ambient noise Say the command 1 2m to 1 8m from the microphone on the Samsung Smart Control The optimal volume for voice commands is between 75 dB and 80 cB Requirements for Using Motion Recognition Before using motion recognition make sure the TV s camera has been turned on Be sure to use Motion Control within recommended distances TV Camera Built in between 1 5m and 3 5m TV Camera Sold Separately between 1 5m and 4m The actual recognition range may vary depending on the camera angle and other factors Adjust the camera s angle using the wheel on the back of the camera Do not point the camera directly at the sun or any other light source or obstruct its view For the camera to recognise movement you have to stand out from the background The appropriate ambient brightness is 50 to 500 lux 100 Lux Bathroom 400 Lux Living Room Avoid direct sunlight when using Motion Control Run the Motion Control Environment Test to assess the camera s recognition range before using Motion Control Requirements for using Face Recognition Be sure to use Motion Control within recommended distances TV Came
126. on on a wide variety of topics in a smart and convenient way Updated in real time NewsON informs users of the latest headlines top stories popular issues and weather forecasts G You can use POINTER on remote control to choose the item you want News News articles are updated in real time Simply select an article on the screen The selected article will be displayed on the screen in details For longer articles press A or Y button on the remote control to scroll the screen To move to a different article press lt or gt button on the remote control Weather Weather information is provided for major cities of the user s country Select a weather related item on the screen The selected item will be displayed in details Using SAMSUNG APPS Service gt Featured gt APPS Most Popular Video Game Sports Lifestyle Information Education Kids s SART TV p r Po gt 4 uf 454 t r Actual menu screen may differ depending on the TV model This service or some of functions of it may be not available in some countries or region Smart Hub offers a variety of free and paid news sports weather and gaming content you can install directly on your TV the same way as you would on a smartphone or tablet Before you use SAMSUNG APPS make sure the TV is connected to the Internet Your TV must be connected to the Internet in order to use SAMSUNG APPS Launching Smart Hub for the first time installs the d
127. onfigure the TV to show a specific channel or programme at a specific time and date The icon appears next to programmes that have been configured for a Schedule Viewing Toset up a Schedule Viewing you must first set the TV s clock Go to Clock System gt Time gt Clock Setting Up Schedule Viewing Digital Channel Schedule Viewing You can set up Schedule Viewing for programmes on digital channels on the following screens e The Guide Screen Select an upcoming programme from the Guide to set up a Schedule Viewing for it e The Programme Info Screen Select INFO on virtual remote control to display information about the current programme From the programme information screen select right button to view information about the next programme and press Enter to set up a Schedule Viewing or Schedule Recording for the upcoming programme Analogue Channel Schedule Viewing MENU 123 gt MENU gt Broadcasting gt Schedule Manager The Schedule Viewing function for programmes on analogue channels can be set up by specifying the time and date 1 Select Broadcasting gt Schedule Manager 2 Select Schedule from the Schedule Manager to bring up a pop up menu Select Schedule Viewing 3 Specify the Source Channel Repeat and Start Time options for the programme you want to watch and then select OK to finish Managing the Schedule Viewing List MENU 123 gt MENU gt Broadcasting gt Schedule Manager You can chang
128. onnected to the TV e f you are using an antenna verify it is positioned correctly and the all the connections are secure e Run Setup System gt Setup or Auto Tuning Broadcasting gt Auto Tuning Go to Subtitle System gt Accessibility gt Subtitle and change the Subtitle Mode Some channels may not have caption data The compression of the video content may cause picture distortions This is especially true with fast moving pictures from sports programmes and action movies A weak signal can cause picture distortions This is not a problem with the TV The computer won t connect The Problem The Mode Not Supported message appears The video is OK but there is no audio Try this Set your PC s output resolution so it matches a resolution supported by the TV If you are using an HDMI connection check the audio output setting on your PC If you are using a DVI to HDMI cable a separate audio cable is required can t connect to the Internet The Problem The wireless network connection failed The software update over the Internet has failed Try this Make sure the TV is connected to a wireless IP router Confirm your wireless modem router is on and connected to the Internet Check the network connection status If the TV is not connected to a network connect to a network The upgrade stops if you already have the latest software version The Schedule Recording Timeshift function isn t
129. option to achieve the optimal contrast setting Black Tone Try Now Adjusts the black colour depth Flesh Tone Darkens or lightens skin tones RGB Only Mode Adjusts the red green and blue levels individually Colour Space AN Adjusts the range of colours that can be displayed on screen Auto automatically adjusts the colour space depending on the input signal Native applies a range that is wider than the input signal Custom allows you to adjust the colour space manually e White Balance Adjust the colour temperature of the picture to make white objects look white and the overall picture appear natural 2 Point Adjust each of the 3 colour s luminosity with the offset menu and the brightness with the gain menu To restore the default values select Reset 10 Point Adjust the white balance by adjusting the brightness of each of the 10 sections of red green and blue colours of the input signal To choose a section select a desired section in Level field A You can use the 10 Point function only when the Picture Mode is set to Movie Some external devices may not support this e Gamma Adjusts the primary colour intensity Adjusting the Picture for Easier Viewing Picture Options MENU 123 gt MENU gt Picture gt Picture Options Select Picture gt Picture Options to make additional adjustments for an easier viewing experience When the TV is connected to a computer via an HDMI DVI cable only Col
130. or down This scrolls the TV menu or screen up down e Exiting the TV Menu or Feature Left click on the mouse at the blank place Or choose RETURN This closes the menu Changing Mouse Buttons and Pointer Speed Select System gt Device Manager gt Mouse Settings gt Mouse Options QAND The following options are available e Primary Button Choose which left or right button to use to select and run items e Pointer Speed Adjust the movement speed of the pointer that appears on the screen Entering Text Using QWERTY A QWERTY keypad appears when you need to enter text entering the network password logging into your Samsung account etc allowing you to enter text using your remote control Using Additional Functions Select i on the QWERTY keyboard screen The following options are available e Recommend text Enable disable the Recommended Text feature Enabling the Recommend text feature allows you to quickly enter text starting with the characters you typed in by displaying recommended words To enter the word Internet for example all you have to do is enter In and select the word Internet from the list of recommended words The word is memorised so that you can enter the same text again more easily e Reset recommended text data Delete both the recommended words and the memorised words to clear the list e Predict Next Letter Enable disable the Text Prediction feature Enabling the Text Prediction feature elimina
131. order from the bottom of the screen and then rearrange the selected channels Press Enter button to finish Renaming a Favourites List Rename an existing favourites channels list 1 Select Change Fav at the bottom of the screen and then change the Favourites list to the Favourites list you want to use From the selected Favourites list select the channels you want to rename Select Options A list appears Select Rename Favourites from the list A pop up window appears Rename the list in the pop up window The new name can be up to 20 characters long Copying a Favourites List to a Different Favourites List Copy channels from one favourites channels list to another 1 Select Change Fav and then change the Favourites list on the side of the screen to the Favourites list you want to use From the Favourites list displayed on the side of the screen select all the channels you want to COPY Select Options A list appears Select Copy to Favourites from the list A pop up window appears From the pop up window that appears on the screen select the Favourites lists you want to copy the selected channels to This copies the selected channels to the selected Favourites lists A Copy to Favourites is only available when there are channels in the Favourites list Adding Realism to Sports MENU 123 gt MENU gt System gt Sports Mode Sports Mode enables optimal picture and sound settings for sports events making th
132. ore Demo certain functions are disabled and the TV automatically resets itself after a certain amount of time Getting Support Support through Remote Management MENU 123 gt MENU gt Support gt Remote Management If you need assistance with your TV you can use this feature to let Samsung Electronics diagnose your TV remotely You will need to read and agree to the service agreement before using this feature A Samsung Electronics technician will then diagnose repair and update your TV remotely Y This option requires an Internet connection What Does Remote Service Do Samsung Remote Support service offers you one on one support with a Samsung Technician who can remotely e Diagnose your TV e Adjust the TV settings for you e Perform a factory reset your TV e Install recommended firmware updates How Does it Work Having a Samsung Tech remotely service your TV is easy Call the Samsung Contact Centre and ask for remote support Open the menu on your TV and go to the Support section Select Remote Management and then read and agree to the service agreements When the PIN screen appears provide the PIN number to the agent A The agent accesses your TV AI er Finding the Information You Need for Service MENU 123 gt MENU gt Support gt Contact Samsung Use this option to find the support service website s address and contact number your TV s model number your TV s software version the Smart Hu
133. ork want to start Anynett want to exit Anynett The message Connecting to Anynett device or Disconnecting from Anynet device appears on the screen The Anynet device won t play The connected device is not displayed The TV audio is not being played through the receiver Try this Confirm that the device is an Anynet device The Anynet system supports Anynet devices only Check if the power cord of the Anynet device is properly connected Check the cable connections of the Anynet device Go to System and see if Anynet HDMI CEC has been set to On Check whether the TV remote control is in TV mode Check whether the remote control is Anynet compatible Anynet may not function when certain functions are operational Channel Search Smart Hub set up etc If you have disconnected and then reconnected the HDMI cable scan for devices again or turn your TV off and on Check if the Anynet device is properly connected to the TV and then navigate to the System menu to see if Anynet HDMI CEC is set to On Select View TV from the Anynet menu Select a non Anynet device from the Source list You cannot use the remote control when you are configuring Anynet or switching to a viewing mode Use the remote control after the TV has completed the Anynet configuration or has switched to a viewing mode You cannot use the play function when Setup is in progress Check whether the devi
134. ot available when the TV is in the 3D mode Using Anynet HDMI CEC Use Anynett HDMI CEC to control all external devices that support HDMI CEC using just the TV s remote control Note that Anynet HDMI CEC only works with the TV s remote control and not with the panel keys You can configure the TV s universal remote function to control third party cable boxes Blu ray players and home theatres that do not support HDMI CEC using the TV s remote control For more information refer to Controlling External Devices with the TV Remote Universal Remote Setup Anynet Requirements Anynet cannot be used to control external devices that do not support HDMI CEC Anynet devices must be connected to the TV using an HDMI cable Some HDMI cables may not support Anynet HDMI CEC In this case you will need to replace the HDMI cable The TV remote control may not function under certain circumstances If this occurs select the Anynet device again Anynet HDMI CEC only works with external devices that support HDMI CEC and only when those devices are either in standby mode or turned on Anynet HDMI CEC can control up to 12 compatible external devices up to 3 of the same type With home theatre systems however the number of systems that can be controlled is limited to one To listen to 5 1 channel audio from an external device connect the device to the TV via an HDMI cable and the device s digital audio output connector dir
135. our Tone can be adjusted Choose a Picture Mode and then adjust the settings Colour Tone Adjusts the colour tone The setting is applied on an individual Picture Mode basis When a Picture Mode is changed the corresponding setting will be applied automatically A If the Picture Mode is set to Dynamic you will only be able to choose Cool or Standard Digital Clean View Reduces static and ghosting caused by a weak signal Selecting Auto Visualisation displays the signal strength at the bottom the screen Green indicates the best possible signal A Auto Visualisation available for analogue channels only MPEG Noise Filter Reduces MPEG noise and improves video quality HDMI Black Level AND Some external devices connected to the TV via an HDMI cable can have issues such as low black level low contrast and dull colours Use HDMI Black Level to adjust the black level to compensate This is only available when using an external device connected to the TV via an HDMI connector A This function is only available when the input signal connected to the TV via an HDMI connector is set to RGB444 HDMI UHD Color Allows you to set the HDMI UHD Color mode to On or Off for each HDMI connector on the TV When set to On the TV optimises processing of UHD 50P 60P signals To configure the HDMI UHD Color mode for each HDMI connector turn off the power of the external devices and disconnect the HDMI cables connected to the TV Then
136. out the remote control for the visually impaired MENU 123 gt MENU gt System gt Accessibility gt Learn About your Remote Control This function helps individuals with a visual impairment to learn the positions of the buttons on the remote control When this function is activated press a button on the remote control and the TV tells you its name To exit Learn About your Remote Control press the RETURN button twice A This function is only available on certain models in specific geographical areas Using Multi output Audio MENU 123 gt MENU gt System gt Accessibility gt Multi output Audio TV sound will be played simultaneously through the TV s internal speakers and connected Bluetooth headphones Listening to the TV through Bluetooth headphones for the audibly impaired MENU 123 gt MENU gt Sound gt Speaker Settings gt Bluetooth Headphones You can turn on both of the TV speaker and Bluetooth headphones at the same time The audibly impaired can adjust the TV volume to control audio from the Bluetooth headphones Changing the Menu Language MENU 123 gt MENU gt System gt Menu Language Select System gt Menu Language and then choose a language from the list Use this option to change the menu language Setting Up a Password MENU 123 gt MENU gt System gt Change PIN Set a PIN Personal Identification Number to lock channels reset the TV and change the TV settings 1 Select System gt Change
137. outer not found Go to Network Settings and select the correct router Unable to connect to a wireless router Check the following 1 Check if the router is turned on If it is turn it off and on again 2 Enter the correct security key if required IP auto setting failed Do the following or configure the IP Settings manually 7 Make sure that the DHCP server is enabled on the router Then unplug the router and plug it back in Enter the correct security key if required 3 If this does not work contact your Internet Service Provider for more information Unable to connect to the network Do the following 1 Check all IP Settings 2 Enter the correct security key if required 3 If this does not work contact your Internet Service Provider for more information Connected to a local network but not to the Internet 7 Make sure that the Internet LAN cable is connected to the router s external LAN port 2 Check the DNS values in the IP Settings 3 If the problem persists contact your Internet Service Provider Network setup is complete but unable to connect to the Internet If the problem persists contact your Internet Service Provider Checking the Internet Connection Status MENU 123 gt MENU gt Network gt Network Status Network Network Status Network Settings Wi Fi Direct Multimedia Device Settings Screen Mirroring Device Name TV Samsung LE A Actual menu screen may differ dep
138. ption Subtitle Turn the subtitles On or Off Subtitle Language Used to change the language Y This option works only when the video supports subtitles display Used to change the size of the screen The supported picture sizes vary depending on the video Change the Picture Mode setting Used to change the Sound Mode Choose a speaker to play the audio This function is only available when you have a home theatre or receiver connected to the TV Choose a desired audio language This option works only when the video supports multi track sound Displays detailed information about the current file Managing Recorded Files 1 Press SOURCE button 2 Select a USB recording device A list of recordings appears This function is only available on certain models in specific geographical areas Saved File List Features e Sorting the Saved File List Sorting with Sort By Select Sort By at the top of the screen and then select a viewing mode The list is sorted based on the selected viewing mode Sorting with Filter Select Filter at the too of the screen and then select a filter The list is refreshed to only show files that match the selected filter e Other options Function Description Play Selected Select files from the file list and then select Play You can create a playlist Delete Deletes recording files Select the files and then select Delete This deletes all selected files Setting Up a Schedule Viewing C
139. ptions from the bottom of the Edit Favourites screen to access the following options Select All Deselect All You can select all channels You can cancel the channels you selected Copy to Favourites Copy channels from one favourites channels list to another This can only be used when the focus has selected a channel registered to a Favourites list Rename Favourites Rename an existing favourites channels list This can only be used when the focus has selected a channel registered to a Favourites list Sorting Change the list ordered by Channel Name or Number This function is not available on analogue channel Aerial Choose between Terrestrial Cable Edit Channel You can manage the channels saved on the TV Information View detailed information about the current programme Removing Registered Channels from a Favourites List Remove channels from a favourites channels list 1 Select Change Fav at the bottom of the screen and then change the Favourites list to the Favourites list you want to use 2 Select the channels you want to remove from the selected Favourites list Select Delete Rearranging a Favourites List Rearrange the order of the channels in a Favourites Channels List 1 Select Change Fav at the bottom of the screen and then change the Favourites list to the Favourites list you want to use 2 From the selected Favourites list select the channels you want to rearrange Select Change
140. r a sharper LED image A The Info screen on your TV displays the resolution and frequency of the incoming signal 60Hz but not the frequency the TV is generating for the image it is displaying by using Auto Motion Plus function A If noise occurs on the screen please set up the Auto Motion Plus to Off If Auto Motion Plus is Custom you can set up the Blur Reduction Judder Reduction LED Clear Motion and Reset manually Blur Reduction Adjusts the blur reduction level from video sources Judder Reduction Adjusts the judder reduction level from video sources when playing films LED Clear Motion Removes drag from fast scenes with a lot of movement to provide a clear picture A If LED Clear Motion is On at 60Hz video signal the screen may flicker A When LED Clear Motion is On the screen appears darker than when it is Off Reset Reset the custom settings to the factory defaults A If you have Auto Motion Plus on and then bring up the INFO screen the INFO screen displays the resolution and frequency of the incoming video signal 60Hz This frequency is not the same as the frequency of the picture the TV is displaying when Auto Motion Plus is on Analogue Clean View Reduce the diagonal noise in the picture caused by the crosstalk of signals Smart LED This controls the brightness of individual areas on screen to maximum contrast automatically A This function is not supported depending on the region or model View
141. r than 3M to get the next best UHD 60P viewing quality HDCP 2 2 can only use the HDMI MHL port HDCP is short for High bandwidth Digital Content Protection and is for video copyright protection Many computer graphics adaptors do not have HDMI ports but have DVI ports instead If your computer graphics adaptor has a DVI port use an HDMI to DVI cable to connect the computer to the TV For more information refer to Connecting with the HDMI to DVI Port If you are using an HDMI adapter the TV recognises the signal as an HDMI signal and may respond differently than it would to an MHL to HDMI cable connection Certain functions such as Smart Hub may not be available if the Source is set to HDMI and 3D Auto View is set to On If this is the case set 3D Auto View or 3D Mode to Off Refer to the diagram and connect the HDMI cable to the video device s HDMI OUT connector and the One Connect s HDMI IN 1 STB connector The number of connectors and their names and locations may vary depending on the model Once the connection has been made you will be able to select the connected external device using the SOURCE button Component Connection Refer to the diagram and connect the Component cable to the One Connect s COMPONENT IN connectors and the devices COMPONENT OUT connectors Make sure the cable colours match the connector colours Note When pulling out the plug that connects the One Connect component input connector pl
142. ra Built in between 1 5m and 3 5m TV Camera Sold Separately between 1 5m and 4m The actual recognition range may vary depending on the camera angle and other factors The appropriate ambient brightness is 50 to 500 lux 100 Lux Bathroom 400 Lux Living Room Face Recognition can recognise up to 5 different users at a time The TV may have difficulty recognising twins and people with similar faces as two different individuals Note the following when using Face Recognition Do not cover your face with a hat a pair of sunglasses or your hair Your entire face must be visible to the camera Avoid shadows over your face Shadows prevent the camera from recognising your face accurately Keep your expression as neutral as possible In addition keep your mouth closed and as neutral as possible When you log into your Samsung account your facial expression must be the same as the facial expression you had when you registered Facial expression you had during the registration process Read Before Using SAMSUNG APPS e Due to the product characteristics featured on the Samsung Smart Hub as well as limitations in available content certain features applications and services may not be available on all devices or in all territories Some Smart Hub features may also require additional peripheral devices or membership fees Visit http www samsung com for more information on specific device information and content a
143. rce screeen 2 Select Universal remote setup from the top of the screen This initiates the universal remote setup process 3 Select an external registered device on the Universal remote setup screen The following options are available e Use Home Cinema Listen to the audio from the external device through the connected home theater e Link Set top Box Listen to the audio from the set top box through the home theater that is connected to the TV e Link Blu ray Player Listen to the audio from the Blu ray player through the home theater that is connected to the TV Controlling the TV with a Keyboard MENU 123 gt MENU gt System gt Device Manager gt Keyboard Settings You can use a keyboard to control the TV A Certain models do not support USB HID class keyboards Connecting a Keyboard Connecting a USB Keyboard Plug the keyboard cable into the One Connect s USB port A connection message appears on the screen Connecting a Bluetooth Keyboard Availability depends on the specific model and area Place the Bluetooth keyboard into the standby status Refer to the keyboard manual for information on putting the keyboard into the standby status Select System gt Device Manager gt Keyboard Settings gt Add Bluetooth Keyboard The Add Bluetooth Keyboard screen will appear and automatically scan for available keyboards A If your keyboard was not detected position the keyboard close to the TV and t
144. rd You can add or remove the approved pages Encoding Set the encoding to Auto or selects an encoding method from the list About Views the current version of Web Browser Help This will familiarise yourself with the basics of Web Browser Command and Status Bar at a Glance Open the Web Browser to display the command and status bar at the top of the screen The following items are available lt Back Move to the previous page gt Forward Move to the next page ES Home Page Move to the main screen Address Bar Check the address of the current page or enter a web page address to move to the page S Refresh x Stop Reload the current page or stop reloading the current page ed Add to Bookmark Add the current page to Bookmarks Search Make a keyword search using the user specified search engine A To change the search engine select the El icon and then select a search engine in the Set Search Engine menu Close Exit Web Browser New Tab Open a new tab Removing an App from the TV A Note that if an app is removed the data related to the app is also deleted Select an app to remove on the APPS screen and press and hold the Enter button to show a pop up menu Select delete If you want to remove multiple apps select Options from the top of the screen and select all the apps to delete and then select Delete Locking and unlocking apps Select apps to lock or unlock on the APPS screen an
145. rding time e Stop Recording You can stop the recording e Highlights Player Use Highlights Player to view manually or automatically saved highlight segments of the recording However Highlights Player is not available with these TV operations e Recording two channels simultaneously e While Auto Description is active e Switching the input signal using the SOURCE button When 3D mode is active x This function is only available when a recording is in progress This function is only available while you are watching a recorded programme Available only when recording is in progress e Watch Live TV at the same time Select while viewing a recorded programme to watch live TV on a PIP window Press once more to exit PIP mode However Watch Live TV at the same time is not available with these TV operations e Recording two channels simultaneously e While Auto Description is active e Switching the input signal using the SOURCE button When 3D mode is active x This function is only available when a recording is in progress x This function is only available while you are watching a recorded programme Viewing a Sports Event Recorded in Sports Mode View recorded sports events using the USB Drive option in the MY CONTENT screen A For more information refer to Viewing Recorded Programmes TV Viewing Support Features Showing Subtitles MENU 123 gt MENU gt System gt Accessibility gt Subtitle Show
146. re The picture is distorted Try this If your Samsung Television is flickering or dimming sporadically you may need to disable some of the energy efficiency features Disable Energy Saving System gt Eco Solution gt Energy Saving or Eco Sensor System gt Eco Solution gt Eco Sensor If the colour on your Samsung television screen is not correct or the black and white colours are off run Picture Test Support gt Self Diagnosis gt Picture Test If the test results indicate that the problem is not caused by the TV do the following e Confirm that the TV s video input connectors are connected to the correct external device video output connectors e Check the other connections as well If the TV is connected to an external device via a component cable confirm that the Pb Pr and Y jacks are plugged into their proper connectors If the colours on your Samsung TV are correct but just a little too dark or bright try adjusting the following settings first e Go to the Picture menu and adjust the Backlight Contrast Brightness Sharpness Colour and Tint G R settings If you notice ghosting or blurring on the screen use the Auto Motion Plus option Picture gt Picture Options gt Auto Motion Plus to resolve the issue If your Samsung TV appears to turn off by itself try disabling some of the TV s energy efficiency features See if Sleep Timer System gt Time gt Sleep Timer has been enabled The Sleep Timer a
147. re Using Voice Motion or Face Recognition To enable Face Recognition first connect the optional TV camera to the TV A The optional TV camera must be connected to the dedicated USB port at the back of the TV TV need to be connected to the TV camera in order to use Face Recognition The optional TV camera must be connected to the dedicated USB port at the back of the TV Other USB ports do not support the TV camera or Face Recognition Registering Your Face to Your Samsung Account Register your face to your Samsung Account to allow the TV to recognise you by your face Create a new account if you do not already have one First you must sign in with your Samsung Account 1 Navigate to Edit profile Smart Hub gt Samsung Account gt Edit profile and select Register face in the account information screen A To register your face using the Virtual Remote panel press MENU 123 to select your active Samsung Account and then select Edit profile 2 Read the information displayed in the pop up window select OK and then enter the account password 3 On the face registration screen select Take picture and then align your face with the dotted red line displayed on the screen The dotted line will turn green once your face is recognised A Your entire face must be visible to the camera Make sure the face is brightly lit Shadows prevent the camera from recognising your face accurately A Keep your expression as neutral as possible
148. rect Connecting via Samsung Link Samsung Link enables you to play photo video and music files from a Samsung Link enabled mobile device without having to manually connect the device to the TV Connecting via Home Network DLNA View play on the TV photo video and music files from a mobile device connected to the same router or AP as the TV Connecting via Smart View Install and run the Smart View app on your mobile device and connect it to the TV in the same network However Smart View does not work when this function is in use Connection notes for mobile devices To use the Screen Mirroring function the mobile device must support a mirroring function such as AllShare Cast or Screen Mirroring To check whether your mobile device supports the mirroring function please visit the mobile device manufacturer s website To use Wi Fi Direct the mobile device must support the Wi Fi Direct function Please check if your mobile device supports Wi Fi Direct The video or audio may intermittently stop depending on network conditions Connecting with MHL to HDMI Cable Your TV supports MHL Mobile High definition Link via an MHL cable MHL enables viewing and playing video image and audio files from mobile devices on the TV However MHL is only available through the TV s HDMI IN MHL port and only when used in conjunction with an MHL enabled mobile device For information on configuring MHL on your mobile device refer to the device
149. rial Subtitle 3D Sleep Timer TOOLS e Manual Power Description You can split the TV screen and use various functions such as watching TV surfing the web watching video and so on Turn the Sports Mode on or off Change the picture size Change the picture mode Select the speakers which you want to use to listen to the TV s sound To set this option external speakers must be connected to the TV When you press the Dual II button the first time the current dual mode is displayed on the screen Press the Dual II button again to change the dual mode Choose your preferred method of receiving digital broadcasts Control the subtitle of the video This option works only when the video supports subtitles display Turn the 3D effect on or off Use sleep timer Displays the Tools menu on the screen Launch the e manual Turn the TV on and off The On Screen Remote buttons may differ with the TV features or functions Dy i A ie The On Screen Remote buttons may differ with the TV model To change the positions of the buttons on the first row press and hold the Enter button Controlling External Devices with the TV Remote Universal remote setup MENU 123 gt MENU gt System gt Universal remote setup Availability depends on the specific model and area The universal remote control feature lets you control cable boxes Blu ray players home theatres and other external devices co
150. rpose other than their intended purpose Do not use them as general eyeglasses sunglasses or protective goggles Some users may feel dizzy nauseous or experience headaches in the 3D or Samsung Multi View function If you experience any of these symptoms stop watching the 3D item remove the 3D glasses and rest An extended period of watching TV in 3D viewing mode may cause eye fatigue In this case stop watching 3D immediately take off the 3D glasses and allow your eyes to rest Do not use the 3D function or 3D glasses while walking or moving around Using 3D mode or wearing 3D glasses while moving around may result in injury due to walking into objects tripping and or falling Wearing the 3D glasses and lying on your side while watching TV may damage the temples of the 3D glasses The temples of the 3D glasses are unfolded This may damage the 3D glasses Because the 3D glasses react to acceleration repeatedly shaking the 3D glasses may consume the battery faster than normal A Safety Precautions The following information is designed to ensure the user s safety and prevent property damage Read the information carefully Do not expose the product to direct sunlight or a hot or humid environment Failure to do so may result in fire or a product malfunction Do not apply force to the lenses of the 3D glasses Do not drop or bend the product This may result in a product malfunction Keep the 3D glasses and accessories out
151. rtcuts that enables or disables Accessibility MENU gt System gt Accessibility menus Changes the source Displays the On Screen Remote Control on the TV s screen Press and hold this button to run the Voice Recognition function When the microphone icon appears on the screen say a voice command into the microphone Say Help to learn about basic usage and voice commands Y For more information refer to Displaying the Remote Control on the Screen virtual remote control Changes the volume Place a finger on the POINTER button and move the Samsung Smart Control The pointer on the screen moves in the direction you moved the Samsung Smart Control Press the POINTER button to select or run a focused item Changes the channel Moves the focus and changes the values seen on the TV s menu Selects or runs a focused item Press and hold this button to launch Guide while you are watching the TV Returns to the previous menu or channel Press and hold to exit the currently running function on the TV s screen Controls the content when playing the media content such as movie picture or music Displays related information about the current programme Y This function may vary depending on the different regions countries Launches Smart Hub applications Using the Samsung Smart Control Operating the TV with the POINTER button The Samsung Smart Control has a motion sensor gyro sensor that allows you to easily control th
152. s platform multi screen app that enables you to load the TV screen on a mobile device share multimedia contents between two devices and control the TV remotely For more information refer to the Smart View manual Connecting via Samsung Link Samsung Link enables you to view play photo video and music files from a Samsung Link enabled mobile device with ease Also use Samsung Link to play and view the content of a mobile device that has been registered to Samsung Link under your Samsung account even if the mobile device and the TV are not connected to the same router or AP 7 Run the Samsung Link app on the mobile device and then sign in with your Samsung account A To use Samsung Link you have to sign in with a Samsung account If you don t have a Samsung account create one first 2 Quickly access and play photo video and music files from the mobile device running Samsung Link app under your Samsung account A For more information on using the Samsung Link app refer to the Help section of the manual Connecting via Home Network DLNA View play photo video and music files from a mobile device on the TV 1 Connect both the TV and the mobile device to the same router or AP A home network will be configured once the connections are established A Home Network DLNA enables content sharing between the TV computers and mobile devices connected to the same wired or wireless router 2 Enable File Sharing on the mobile device
153. s not available if 3D mode is set to ES Normal or B Off e Automatically Turning on 3D if 3D Content is Detected Select Picture gt 3D gt 3D Auto View Use 3D Auto View to set the TV to automatically activate 3D mode when 3D content or a 3D broadcast is detected If 3D Auto View is set to Auto1 Auto2 a window confirming 3D activation will be displayed 3D is activated once confirmed A 3D is not displayed while certain applications are running To watch the TV in 3D mode exit the application e Optimise overall 3D picture clarity Select Picture gt 3D gt 3D Optimization This option is used to optimise overall 3D picture clarity Picture Support Functions Changing the Picture Size and Position Choosing the Right Screen Size MENU 123 gt MENU gt Picture gt Picture Size gt Picture Size You can change the size of pictures displayed on the TV screen Supported screen sizes vary depending on the input signal Refer to the Picture Sizes and Input Signals section for more information about supported screen sizes The Picture Size option is not available for images in the UHD resolution because the supported screen size is fixed 16 9 Set the picture to the 16 9 wide screen format Zoom Magnifies the 16 9 wide pictures vertically to fit the screen size A magnified picture can be moved up and down Custom Magnifies or shrinks 16 9 pictures vertically and or horizontally A magnified or shrunk pic
154. s shown on the screen for longer than the time you selected the TV will automatically activate Screen Burn Protection to prevent burned in after images that may damage the screen Using Energy Saving Features MENU 123 gt MENU gt System gt Eco Solution Eco Solution adjusts the TV s brightness level and prevents overheating to reduce overall power consumption e Energy Saving Select a brightness setting from the list to reduce the TV s power consumption e Eco Sensor Automatically adjusts the TV s brightness level based on the ambient light level to reduce the TV s power consumption If the Eco Sensor has adjusted the screen s brightness level you can manually adjust the screen s minimum brightness level by adjusting the Min Backlight Changing the Picture menu s Backlight setting while Eco Sensor is running automatically disables Eco Sensor A When the Eco Sensor is set to On the screen is darker than usual e No Signal Power Off Select a time from the list If no signal is received for the specified duration the TV automatically cuts off the power to reduce power consumption e Auto Power Off If the TV remains turned on for four hours without any user input the TV will automatically turn off to prevent overheating e Motion Lighting Adjusts the brightness in response to on screen movements to reduce power consumption A This function is only available when Picture Mode is set to Standard A This function is n
155. sal remote setup Voice Recognition A Your TV s menu may differ from the image above depending on the model Using the functions available in sports mode Set Sports Mode to On and then press the Enter button on the remote control Select a function to run A For more information refer to Adding Realism to Sports A Actual menu screen may differ depends on the specific model and area Editing Channels Running the Edit Channel function MENU 123 gt MENU gt Broadcasting gt Edit Channel Broadcasting Auto Tuning Aerial Terrestrial Channel List Guide Schedule Manager Edit Channel Edit Favourites A Your TV s menu may differ from the image above depending on the model Rearranging or deleting channels MENU 123 gt MENU gt Broadcasting gt Edit Channel gt Change Number or Delete You can rearrange the order of channels or delete channels To change the order of a channel select it and then select Change Number To delete a channel select it and then select Delete A Actual menu screen may differ depends on the specific model and area Playing Multiple Screens You can surf the web or run an app while viewing the TV You can change the size of each screen by dragging the circle in the middle of the screen to the left or right A For more information refer to Viewing Multiple Screens or Features with Multi Link Screen A Actual menu screen may differ depends on the specific mod
156. second or two later than the specified time e If the Schedule Recording function is operating while a recording is being made on an HDMI CEC external device the priority is given to the Schedule Recording e Connecting a recording device to the TV automatically deletes abnormally saved recording files e If the Off Timer or Auto Power Off has been set the TV will overide these settings continue to record and turn off after the recording has ended Before the Using Timeshift Function A USB hard drive with a speed of 5 400rom or above is recommended However RAID type USB hard drives are not supported USB memory sticks or flash drives are not supported The total recording capacity may vary depending on the amount of available hard drive space and the recording quality level If the available storage space falls below 500MB while both the Schedule Recording and Timeshift functions are in progress only the recording will stop The maximum amount of time available for the Timeshift function is 90 minutes The Timeshift function is not available for locked channels A time shifted video is played according to the TV settings Before the Timeshift function can be used the Device Performance Test must be performed on the USB storage device connected to the TV To perform the Device Performance Test select USB Drive in the MY CONTENT panel and then select the recording device The Timeshift function may be terminated automatically
157. sing a PC even while watching a TV programme using PIP Select Help to view the information of the Internet web browser Y For amore convenient web browsing experience use a keyboard and mouse a CO Q The browsing page may differ from that on a PC Y This function is not supported in some area or country Browsing preferences Select Configure the browsing settings to meet your needs or convenience e Bookmarks Move to the Bookmarks screen On this screen add the current page to Bookmarks or move edit or delete a bookmarked page e History Easily access visited pages by navigating the History screen e Zoom Zoom in or out of the current web page e View Certificates You can view the certificate about the site Settings You can use the following contents in settings General Hides taps or menu bars automatically after a period of inactivity or resets all user settings The bookmarks or browsing histories that you made will not be reset Home Page Sets the homepage when you launch the web browser Search Engine Searches for information that you entered and display the result web pages Privacy amp Security Prevents you from accessing inappropriate web pages or sets not to save the browsing history Blocked pages Blocks or unblocks pages You can manage a list of pages to block Approved pages Limits to use only the page that you have approved To use this option set a passwo
158. t previous or next content or move around pages iN Make a circle with your hand in the counterclockwise direction to move to the Returning to the previous menu Make a large counterclockwise circle with your hand to return to the previous menu A small circle may not be recognised by the TV Displaying the context sensitive menu On the Smart Hub screen fold your index finger for more than 1 second and spread it out This displays the selected item s context menu The screen s option menu differs depending on the selected lists Scrolling the screen Fold down your index finger and then move it to the left right up or down to scroll the TV screen Using Like function With Motion Control inactive raise and hold your thumb for 2 seconds toward the TV camera You can automatically add Facebook s Like function However this is only available in Facebook Showing and Hiding Animated Motion Guide Navigate to MENU 123 gt MENU gt System gt Motion Control and select Animated Motion Guide from the menu Now you can display an animated guide when Motion Control is activated Adjusting Pointer Speed Navigate to MENU 123 gt MENU gt System gt Motion Control gt Pointer Speed and select a pointer speed Changing the motion control screen layout Displaying and using the motion control icons on the TV screen You can display the following screen icons by activating motion control while watching t
159. t you need to create one first Registering Removing and Editing Channels MENU 123 gt MENU gt Broadcasting gt Edit Channel Remove channels from the index of channel restore removed channels and rename analogue channels The Edit Channel screen icons indicate the following A An analogue channel GY A favourites channel e A locked channel Registering and Removing Channels MENU 123 gt MENU gt Broadcasting gt Edit Channel Removing Registered Channels Remove registered channels from the index 1 Select the channels you want to remove Unselect channels by choosing them again To select all the channels select Options from the bottom of the screen and then select Select All from the list 2 Once you have made your selection select Delete from the bottom of the screen to remove the selected channels Editing Registered Channels MENU 123 gt MENU gt Broadcasting gt Edit Channel Select Options at the bottom of the screen to access the following options However the available options may vary depending on the broadcast signal e Select All Deselect All Selects or deselects all channels displayed in the Edit Channel screen e Sorting Digital channels only Change the list ordered by Channel Name or Number e Aerial Choose between Terrestrial Cable e Category If you select a Category its channels appear in the list among the TV s channels e Edit Favourites Organize favourites lists to
160. t Options from the top of the screen and then select Delete My Apps ey z Ensure that the related app data is also removed when you remove an app Locking and unlocking apps Select apps to lock or unlock on the APPS screen and select Options from the top of the screen and then select Lock Unlock My Apps All selected apps are locked or unlocked Updating apps Select Options gt Update Apps on the APPS screen The TV searches for app updates and then displays the list After scanning you can update some apps or all apps Rearranging apps Select Options on the APPS screen and then select Sort By to sort the apps by date time or others Rating purchased apps You can set the star score by using the left or right directional button on the detailed information screen Using other app features and functions MENU 123 gt MENU gt Smart Hub gt Auto Start Settings gt Channel bound Apps amp Ticker You can configure additional app features and functions Using channel bound apps You can receive the information on TV programmes and other relevant services while viewing TV by using an app installed on the TV and linked to a specific channel A This function is only available when an app supporting Channel bound Apps amp Ticker is installed on the TV Default Apps e Manual The embedded e manual contains information Using the web browser You can surf the Internet on the TV in the same manner as you would u
161. t to display the type of media you want e Sort By Sorts the content list The sorting methods change depending on the type of content you have selected A This function is not available when Filter By is set to All e Delete Deletes the recorded media content from the media content list A This function is not available when Filter By is set to All e Play Selected Plays the selected media content from the media content list A This function is not available when Filter By is set to All Listening to 3D Audio in 3D Mode MENU 123 gt MENU gt Sound gt 3D Audio 3D audio technology provides immersive sound that matches the pop up effect of 3D video by using perspective in the audio depth control Only available in 3D mode Resetting All Sound Settings MENU 123 gt MENU gt Sound gt Reset Sound Use to reset all sound settings to the factory defaults TV Control using your Voice MENU 123 gt MENU gt System gt Voice Recognition You can access and select certain menu options and functions using voice commands For more effective voice recognition speak slowly and clearly in the language specified in the System gt Voice Recognition gt Language option Voice recognition is classified into two interactive voice recognition that enables conversational instructions and imperative voice recognition where only pre defined instructions are used Smart Hub setup and time settings as well as th
162. tal Audio Optical Connection 26 Audio Output Connection Connecting to a Computer 27 Connection notes for computers 28 Connecting via HDMI Port 29 Connecting with the HDMI to DVI Port 30 Connecting via Samsung Link 30 Connecting via Home Network DLNA Connecting with a Mobile Device 31 Connection notes for mobile devices 32 Connecting with MHL to HDMI Cable 33 Using Screen Mirroring 34 Connecting Mobile Devices without a Wireless Router Wi Fi Direct 34 Connecting via Smart View 35 Connecting via Samsung Link 35 Connecting via Home Network DLNA 35 Name of TV on Network Input Signal Selection Connection Notes Using Remote and Peripheral Devices Inserting Batteries into Samsung Smart Control 37 When you see this alarm icon on the screen Pairing Samsung Smart Control 38 Reconnecting Samsung Smart Control About the Samsung Smart Control Using the Samsung Smart Control 41 Operating the TV with the POINTER button 41 Operating the TV with the directional buttons and the Enter button 42 Displaying the Remote Control on the Screen virtual remote control Controlling External Devices with the TV Remote Universal remote setup 44 Setting Up the Universal Remote Control 45 Universal Remote Features Controlling the TV with a Keyboard 46 Connecting a Keyboard 47 Using the Keyboard Controlling the TV with a Mouse 48 Connecting a Mouse 49 Using the Mouse Entering Text Using QWERTY 50 Using A
163. tes the need to find and select individual character keys To enter the word Internet for example select I A predicted word will then appear next to the key Simply select the predicted word to enter Internet A This feature is limited to words that have previously been added to the dictionary Viewing Multiple Screens or Features with Multi Link Screen MENU 123 gt MENU gt Picture gt Open Multi Link Screen You can search the Web use apps and much more simultaneously while watching TV Using Multi Link Screen Learning the basic functions e Changing the channel and volume of a Multi Link Screen To change the channels of a Multi Link Screen press the channel buttons while you are watching the TV To adjust the volume of a Multi Link Screen move to the screen to adjust the volume and then press the volume buttons e Changing the web browser and apps While you are using a Multi Link Screen the recently used web browser or apps are displayed at the right side of the screen You can change these apps to others by using the Smart Hub A Availability depends on the specific model and area e Changing the size of a Multi Link Screen You can change the size of a Multi Link screen Move the focus to the screen you want to resize and then use the up or down directional button Alternatively drag the line in the middle of the screen to the left or right To display the focused Multi Link screen in full screen mode se
164. the Samsung audio device s operating manual for more information on pairing e Add New Device Enables disables SoundShare The connection signals from new devices are ignored if Add New Device is set to Off This function is only available for Samsung audio devices that support TV SoundConnect A TV SoundConnect Surround and Bluetooth Headphones can t be used simultaneously e Samsung Audio Device List Displays a list of paired Samsung audio devices Select a device to display its menu options You can activate deactivate the audio device or remove it from the list e Bluetooth headphone List Sound gt Speaker Settings gt Bluetooth headphone List Listen to the audio through bluetooth headphones e Multi output Audio MENU 123 gt MENU gt Sound gt Speaker Settings gt Multi output Audio Allows you to listen to audio through the TV s speakers and the connected headphones simultaneously Setting up Multiroom Speakers MENU 123 gt MENU gt Sound gt Speaker Settings gt Multiroom Link Settings x YY amp Bw amp Y amp Multiroom Link Settings Set up speakers that are connected via your home network A The Multiroom Link function is not available on all model Settings Sets the Samsung Multiroom Link compatible speaker s to one of the following options Surround Select this option when you want to enjoy a surround system using multiple Samsung Multiroom Link compatible speakers in a single
165. the TV the TV displays a tab with the name of the connected device Select the tab to confirm the content saved on the storage device A You cannot play media content if the content or the storage device is not supported by the TV For more information refer to Photo Video and Music File Limitations A Backup important files before connecting a USB device Samsung is not responsible for damaged or lost files Read before playing media content A To connect the TV to a computer refer to Connecting to a Computer x Y Toconnect the TV to a mobile device refer to Connecting with a Mobile Device A To connect the TV to a USB or external storage device connect the device to the TV s USB port Playing multimedia content in a computer or mobile device A Before connecting to a computer or mobile device configure the network settings Connecting with a computer or mobile device gt gt MY CONTENT To play multimedia content located on a computer or mobile device on the TV you must allow the connection with the computer or mobile device on the TV 1 w N ke M Y Connect a computer or mobile device The TV displays the device s name and lists the media contents in the device Select the media content to play from the list The selected media content plays To stop playing media contents press the WE button or RETURN button Alternatively move to the media content you want to play and then press the button
166. the screen position This option is only available with Picture Size set to Zoom or Custom When the TV is tuned to a digital channel the screen position cannot be adjusted if the Picture Size is set to Fit to screen A The Picture Size option is not available for images in the UHD resolution be cause the supported screen size is fixed 1 To adjust the screen s position select Picture gt Picture Size gt Zoom Position or Position A pop up window appears 2 Select Zoom or Position again from the pop up window Adjust the screen Once done select Zoom or Position and then Close Select Reset to reset the screen position Listening to Audio Only with the Screen Turned Off Picture Off MENU 123 gt MENU gt Picture gt Picture Off Turns off the screen and plays audio through the speakers only To turn the screen back on press any button other than the TV and VOLUME buttons Resetting the Picture Mode Settings MENU 123 gt MENU gt Picture gt Reset Picture QAND Use this option to reset the current Picture Mode to its factory settings This does not affect the settings of other Picture Modes Changing the Sound Mode and Using Sound Effects Choosing the Right Sound Mode for the Environment MENU 123 gt MENU gt Sound gt Sound Mode Sound modes apply preset adjustments to the sound output optimised for different viewing and listening circumstances The sound modes cannot be used when you are listening
167. to audio through external speakers e Standard This is the normal sound mode e Music This mode emphasizes normal music instead of voice e Movie This mode is calibrated to provide the best sound for movies e Clear Voice This mode emphasizes voice e Amplify This mode increases the overall intensity of high frequency sounds for a better listening experience It is designed for hearing impaired listeners e Stadium Setting Sports Mode System gt Sports Mode to On automatically configures Sound Mode to Stadium for a more realistic viewing experience A Stadium cannot be selected by the user A This function is not available when you are listening to audio through external speakers Using Sound Effects MENU 123 gt MENU gt Sound gt Sound Effect AAND Use sound effects to alter how the TV projects sound Restrictions e Sound effects can only be used with the Sound Mode set to Standard e Sound effects cannot be used when you are listening to audio through external speakers Choose a Sound Effect and then adjust the settings e Virtual Surround GAND Produces sound that will make you feel like you are sitting in a movie theatre or concert hall e Dialog Clarity Increases voice intensity to make dialog clearer e Balance Allows you to adjust the sound settings of the left and right soeakers for a better sound balance To restore the defaults select Reset e Equaliser Lets you adjust the speaker balance and make
168. to configure the required settings and complete the setup Welcome to Smart Hub The easiest way to access and discover live TV movies apps games and more Actual menu screen may differ depending on the TV model Using Smart Hub Enjoy the multiple functions provided by Smart Hub on a single screen Actual menu screen may differ depending on the TV model For more information refer to Smart Hub Controlling the TV with Your Voice Setting up Voice Recognition MENU 123 gt MENU gt System gt Voice Recognition Finish the settings required for voice recognition such as the language to use and whether to use Use TV Voice System Accessibility Setup Sports Mode Menu Language English Smart Security Universal remote setup Voice Recognition A Your TV s menu may differ from the image above depending on the model Controlling the TV with your voice Press and hold the MENU 123 button on the Samsung Smart Control or say Hi TV to the TV s built in microphone for 9900 series The Voice Recognition screen appears When the y icon appears on the screen speak commands slowly in a moderately loud voice into the microphone on the Samsung Smart Control x Your TV s menu may differ from the image above depending on the model A This function is only available on certain models in specific geographical areas A For more information refer to TV Control using your Voice Control
169. to play the content To connect a computer through your home network refer to Connecting to a Computer To connect a mobile device through Smart View 2 0 refer to Connecting with a Mobile Device The content shared by a computer or a mobile device may not be played depending on the encoding type and file format of the content The content may not be played smoothly depending on the network status If this occurs transfer the content to a USB storage device and then play the content from the device Playing media content saved on a USB device 1 2 3 Y amp Select MY CONTENT The USB devices connected to the TV are listed Select the media content to play from the list The selected media content plays To stop playing media contents press the HM button on virtual remote control or RETURN button While video with UHD level resolution is being played Motion Control is not available Alternatively if you select a USB device on the Source screen the TV jumps to the MY CONTENT screen automatically Safely Removing a USB Device 1 Press the SOURCE button The Source screen appears 2 Select the USB device to remove and press and hold the Enter button 3 Select Remove USB Device in the list Buttons and functions available while viewing photos Press the Enter button while viewing photos to display available options You can also view the thumbnails of photos saved on the TV while viewing photos The options disappear
170. ttempt to download a file you will receive an error message instead The web browser may not be able to access certain websites Playing Flash videos may be restricted E commerce for online purchases is not supported With websites that have scrollable windows scrolling a window can result in corrupted characters ActiveX is not supported Certain options are not accessible in Link Browsing mode Switch to Pointer Browsing to activate those options Only a limited number of fonts are supported Certain symbols and characters may not be displayed properly The response to remote commands and the resulting on screen display may be delayed while a webpage is loading Loading a webpage may be delayed or suspended completely with certain operating systems The copy and paste operations are not supported When composing an email or a simple message certain functions such as the font size and colour selection may not be available There is a limit to the number of bookmarks and the size of the log file that can be saved The number of windows that can be opened concurrently varies depending on the search conditions and the TV model 17 The web browsing speed will vary depending on the network environment 18 Playing embedded video automatically disables PIP Video playback may not commence after PIP is disabled In this case you will have to reload the page 19 The web browser supports mp3 audio files only 20 If the Clo
171. ture can be moved left right up and down 4 3 Sets the picture to basic 4 3 mode Do not leave the TV in 4 3 mode for an extended period The dark borders displayed on the left and right top and bottom of the screen may cause image retention This phenomenon can appear on LED TV This is not covered by the warranty Changing the picture size automatically MENU 123 gt MENU gt Picture gt Picture Size gt Auto Wide You can make the TV change the picture size automatically in accordance with the input signal G Availability depends on the specific model and area Changing the picture size in 4 3 or Screen Fit mode MENU 123 gt MENU gt Picture gt Picture Size gt 4 3 Screen Size You can select a picture size suitable for your geographical area while you are watching TV in the 4 3 or Fit to screen mode The supported screen sizes differ with the country and this function allows you to adjust the picture size in this case A The 4 3 mode is not available when an external device is connected to the TV via a Component connector or an HDMI connector A Availability depends on the specific model and area Fitting to the picture size MENU 123 gt MENU gt Picture gt Picture Size gt Fit to screen You can make the TV fit the full picture without any cutoff to the picture size set by you Adjusting the Screen Position MENU 123 gt MENU gt Picture gt Picture Size gt Zoom Position or Position Adjusts
172. twork name SSID and security key automatically and then attempts to connect to the Internet A confirmation message appears once a connection is established Select OK Troubleshooting Internet Connectivity Issues Troubleshooting Wired Internet Connectivity Issues No network cable found Make sure the network cable is plugged in If it is connected make sure the router is turned on If it is on try turning it off and on again IP auto setting failed Do the following or configure the IP Settings manually 7 Ensure that the DHCP server is enabled on the router and reset the router 2 If this does not work contact your Internet Service Provider for more information Unable to connect to the network Do the following 1 Check all IP Settings 2 Ensure that the DHCP server is enabled on the router Then unplug the router and plug it back in 3 If this does not work contact your Internet Service Provider for more information Connected to a local network but not to the Internet 7 Make sure that the Internet LAN cable is connected to the router s external LAN port 2 Check the DNS values in the IP Settings 3 If the problem persists contact your Internet Service Provider Network setup is complete but unable to connect to the Internet If the problem persists contact your Internet Service Provider Troubleshooting Wireless Internet Connectivity Issues Wireless network connection failed Selected wireless r
173. ub folders you can select a sub folder in the same fashion e This feature will not function properly if the selected USB device does not contain media files or a folder has not been specified e The slideshow will not start if there is only one image file on the USB device e Folders with long names cannot be selected e Always use different folder names for multiple USB devices e Use a USB memory stick or multi card reader The On Timer may not work with certain battery powered USB devices MP3 players or PMPs because the TV may take too long to recognise the device Turning Off the TV Using Off Timer MENU 123 gt MENU gt System gt Time gt Off Timer A Set the Off Timer to turn the TV off automatically at a specific time Select System gt Time gt Off Timer The timer configuration window appears Configure the following settings The Off Timer is only available if the Clock has been set e Setup Specify the dates and the duration Use Manual to specify the days of the week e Time Set the time that the TV turns off automatically Using the Screen Burn Protection and Energy Saving Features Preventing Screen Burn MENU 123 gt MENU gt System gt Auto Protection Time QAND Still images can leave burned in after images on the screen if left for a long time Use Screen Burn Protection to protect the screen Select System gt Auto Protection Time and then choose a time setting from the list If a still image i
174. uble D symbol are trademarks of Dolby Laboratories HOM The terms HDMI and HDMI High Definition Multimedia Interface and the HDMI Logo are trademarks or registered trademarks of HDMI Licensing LLC in the United States and other countries Open Source Licence Notice Open Source used in this product can be found on the following webpage http opensource samsung com Open Source Licence Notice is written only English Designed with TECHNOLOGY KMAL Glossary 480i 480p 720p 1080i 1080p Generally refers to the number of effective scanning lines that determines the screen s resolution There are two scanning methods interlaced and progressive Scanning Sequential projection of pixels to form images The higher the number of pixels the clearer and more vivid the images Progressive A sequential scanning method that scans every line one after another Interlaced A staggered scanning method that scans every other line until the end of the screen and then fills in the remaining lines Example If the number of horizontal scan lines is 480i Scans 240 lines from start to finish and then scans the remaining 240 lines for a total of 480 lines General differences between 480i and 480p are as follows 480i 480p Horizontal Frequency 15 75Khz 31 5Khz FPS 30 60 Lines on Screen 480 480 ARC Audio Return Channel Generally a separate RCA or optical cable needs to be connected in order for the TV audi
175. ues and then select OK e Use one of the following methods to enter the numerical values Set the numbers using the A and F buttons on screen Place a finger on the POINTER button and move the Samsung Smart Control The pointer on the screen moves to the frame you want Press the POINTER button to select numbers Only use for Samsung Smart Control For general remote control enter the numbers directly Availability depends on the specific model and area The TV attempts to connect to the network again using the specified settings A confirmation message appears once a connection is established Select OK A The network connection speed may differ depending on the DNS server settings A p Y For details on the DNS server settings contact the Internet service provider ISP Connecting to a Wireless Internet Network with WPS MENU 123 gt MENU gt Network gt Network Settings With wireless routers that support WPS Wi Fi Protected Setup or PBC Push Button Configuration it s possible to press a button on the router to connect the TV to the Internet A This functionality is not available with wireless routers that do not support WPS Check to see if your wireless router supports WPS Setting the Network Type to Wireless automatically displays a list of available wireless networks 2 Select WPS PBC and then press the WPS or PBC button located on the wireless router within two minutes 3 The TV exchanges the ne
176. und The speakers are making an odd sound Try this Check the volume control of the device cable box DVD Blu ray etc connected to your TV Set Sound gt Speaker Settings gt Speaker Select to TV Speaker If you are using an external device check the device s audio output option For example you may need to change your cable box s audio option to HDMI if the box connected to your TV is using an HDMI cable To listen to the computer sound connect the external speaker to the computer s audio output connector If your TV has a headphone jack make sure there is nothing plugged into it Reboot the connected device by disconnecting and then reconnecting the device s power cable Make sure that the audio cable is connected to the correct audio output connector on the external device For antenna or cable connections check the signal information A low signal level may cause sound distortions Run Sound Test Support gt Self Diagnosis gt Sound Test can t see 3D images clearly Testing 3D Picture Quality MENU 123 gt MENU gt Support gt Self Diagnosis gt 3D Picture Test if you have not paired your 3D glasses with the TV pair them first To test 3D picture quality the TV and the 3D glasses must have been paired Put on the 3D glasses navigate to MENU 123 gt MENU gt Support gt Self Diagnosis and select 3D Picture Test The 3D Picture Test displays a high definition picture to examine the
177. und Profile from the list Renaming and Deleting Custom Sound Profiles MENU 123 gt MENU gt Sound gt Sound Customiser gt Manage Custom Sound Rename or delete custom sound profiles x GS N gt Custom Sound Profile must contain a Custom Sound Profile Select Sound gt Sound Customiser gt Custom Sound Profile Choose a Custom Sound Profile you want to rename or delete Select Sound gt Sound Customiser gt Manage Custom Sound This brings up the Manage Custom Sound window Select a Custom Sound Profile you want to rename or delete and then select Rename or Delete Selecting Rename brings up the on screen keyboard Use the keyboard to change the name Delete the selected Custom Sound Profile Modifying a Custom Sound MENU 123 gt MENU gt Sound gt Sound Customiser gt Edit Custom Sound Modify the sound settings of a Custom Sound profile Select Sound gt Sound Customiser gt Edit Custom Sound and then select the Custom Sound you want to edit from the pop up window Select Preview to listen to the preview test tone and then select Next Select Next A 6 step test will start During each stage select Yes when you can hear the test tone If you want to listen to it again select No Once the test is complete you can compare the original sound to the calibrated sound Select Next and enter a name for the calibrated sound profile Once the settings have been saved you will be able to enjoy T
178. used Loading Reference Pages Select Link from the side of a feature description page to access the corresponding reference page Updating the e Manual to the Latest Version You can update the e Manual in the same way as updating apps 71 Press then tap on the Touchpad or Enter button to load the SAMSUNG APPS screen 2 Press and hold the Touchpad Enter button The Options menu appears 3 From the Options menu on the screen select Update Apps A pop up window appears You can update the e Manual to the latest version A Update Apps is shown on the screen only when an update is required 4 Select e Manual in the pop up window and then select Update You can update the e Manual to the latest version Updating the Software MENU 123 gt MENU gt Support gt Software Update Check your TV s software version and upgrade it if necessary If the TV is connected to the Internet TV is set to update software automatically If you don t want to update it automatically set Auto update Software Update gt Auto update to Off Updating Software over the Internet MENU 123 gt MENU gt Support gt Software Update gt Update now Select Support gt Software Update gt Update now An online upgrade downloads and installs the upgrade software directly from the Internet This option requires an Internet connection A DO NOT turn off the TV s power until the upgrade is complete The TV will turn off and on automatica
179. utomatically turns the TV off after a specified period of time If the Sleep Timer has not been enabled see if No Signal Power Off System gt Eco Solution gt No Signal Power Off or Auto Power Off System gt Eco Solution gt Auto Power Off has been enabled and disable them When the TV is turned on the remote control receiver flashes 5 times before the screen turns on If you are having problems powering on your Samsung television there are a number of things to check before calling the service department Confirm that the TV s power cord is connected correctly at both ends and that the remote control is operating normally Make sure that the antenna cable or cable TV cable is firmly connected If you have a cable box confirm that it is plugged in and turned on Launch Setup System gt Setup or Auto Tuning Broadcasting gt Auto Tuning If your TV is not connected to a cable box run Setup System gt Setup or Auto Tuning Broadcasting gt Auto Tuning Store displays are all tuned to digital HD high definition channels If you have an analogue cable set top box upgrade to a digital set top box Use HDMI or Component cables to deliver HD high definition picture quality Many HD channels are upscaled from SD Standard Definition content Look for a channel that is broadcasting true HD content e Cable Subscribers Try HD channels from the channel lineup e Terrestrial Cable Aerial Connection Try HD channels after runni
180. vailability Services and content availability are subject to change without prior notice e Samsung Electronics takes no legal responsibility whatsoever for any interruption of app services caused by the service provider for any reason e Application services may be provided in English only and available content may vary depending on the area e For more information about applications visit the applicable service provider s website e An unstable Internet connection may cause delays or interruptions In addition applications may terminate automatically depending on the network environment If this occurs check your Internet connection and try again e Application services and updates may become unavailable e Application content is subject to change by the service provider without prior notice e Specific services may vary depending on the version of the application installed on the TV e An application s functionality may change in future versions of the application If this occurs run the application s tutorial or visit the service provider s website e Depending on the service provider s policies certain applications may not support multitasking Web Browser Restrictions Some countries areas don t support Web Browser N DOQ OG A 10 11 12 13 14 15 16 The browsing screen may differ from the one on your computer The web browser is not compatible with Java applications You cannot download files If you a
181. when you press the RETURN button e Pause Play Start or stop the slideshow Using slideshow you can play all the photos in a folder one by one e Previous Next View the previous or the next photo e Settings Function Description Slideshow Speed Sets the slideshow speed Slideshow Effect Applies transition effects for the slide show Zooms in by up to a factor of 4 Rotate and Zoom Rotates the photo Plays background music while the TV displays photos The music files must be saved in the same USB device as the photo file Background Music pr E Y When background music plays the music icon appears on the screen Using the music icon you can pause the current music file or play another music file Gives you a choice of which speakers to play the background music through TV Speaker Plays the background music through the TV speakers Audio Out Plays the background music through the external speakers Speaker Settings Plays the background music through a speaker that you want Sound Mode Changes the sound mode during playback when you play the music through the TV speakers Speaker List Changes the sound mode setting Sound Mode e i Y This mode is supported only when background music is playing Picture Mode Changes the picture mode setting Information Displays detailed information about the current photo Buttons and functions available while viewing videos Press the Enter button while viewing vi
182. working services In addition you can use photo video and music files stored on external storage devices A A p Y Some Smart Hub services are paid services To purchase such a service the service provider account or Samsung Apps TV account Samsung account is required A Make sure the TV is connected to the Internet The TV must be connected to the Internet in order to use Smart Hub A Some features of Smart Hub require an Internet connection and may not be available depending on the service provider language or region A To use Smart Hub you must agree to the end user agreement and privacy policy Otherwise you will not be able to access the features and services related to them You can view the entire content of the Terms amp Policy by navigating to MENU 123 gt MENU gt Smart Hub gt Terms amp Policy If you don t wish to use Smart Hub anymore you can withdraw the agreement Press to start the Mini Smart Hub After clicking on the Enter button you can start Smart Hub Select an icon on the screen to use the services of the corresponding panel A Usability depends on the specific model and local region Testing Smart Hub connections MENU 123 gt MENU gt Support gt Self Diagnosis gt Smart Hub Connection Test If Smart Hub is not functioning navigate to MENU 123 gt MENU gt Support gt Self Diagnosis gt Smart Hub Connection Test Diagnose the problem by checking the internet connection your
183. xial cables standardised by the IEEE Component Connection Component connections are mostly used for game consoles and transmit the video signal by splitting it into a luminance signal Y and two colour signals Pb and Pr The connector is marked as Component IN _ Pr Pb Y on the back of the TV On some devices it is sometimes marked as Cr Cb Y Cb and Cr are the digital conversions of the Pb and Pr signals The connectors are normally colour coded red R blue B and green G and offer the best picture quality possible for an analogue connection

Samsung SUHD 4K Curved Smart TV Series 9 (55" JS9800) User Manual(HAWK-P ENG)

Contents

Download Pdf Manuals

Related Search

Related Contents

Samsung SUHD 4K Curved Smart TV Series 9 (55&quot; JS9800) User Manual(HAWK-P ENG)

Contents

Download Pdf Manuals

Related Search

Related Contents

Samsung SUHD 4K Curved Smart TV Series 9 (55" JS9800) User Manual(HAWK-P ENG)