Samsung T27A550 User Manual
Contents
1. You can connect an Anynet device using the HDMI cable only Some HDMI cables may not support Anynet functions gt lf it is terminated by an abnormal situation such as disconnecting the HDMI cable or power cord or a power failure please repeat the device scan The TV Check whether the antenna jack on the recording device is Programme properly connected cannot be recorded The TV sound Connect the optical cable between set and the receiver is not output through the receiver LI Anti theft Kensington Lock The Kensington Lock is not supplied by Samsung It is a device used to physically fix the system when using it in a public place The appearance and locking method may differ from the illustration depending on the manufacturer Refer to the manual provided with the Kensington Lock for additional information on proper use Please find a R icon on the rear of the set A kensington slot is beside the R icon To lock the product follow these steps a k SG 1 Wrap the Kensington lock lt Set Rear gt ral cable around a large stationary object such as desk or chair lt Optional gt 2 Slide the end of the cable with the lock attached through the looped end of the Kensington lock cable 3 Insert the locking device into the Kensington slot on the product 4 Lock the lock NOTE e These are general instructions For exact instructions s2. Music Photo when the Source is set to USB Select a folder in the USB device containing music or photo files to be played when the set is turned on automatically gt NOTE fthere is no music file on the USB device or the folder containing a music file is not selected the Timer function does not operate correctly When there is only one photo file in the USB device the Slide Show will not play fafolder name is too long the folder cannot be selected Each USB you use is assigned its own folder When using more than one of the same type of USB make sure the folders p gt assigned to each USB have different names Off Timer 1 Off Timer 2 Off Timer C Sittin 3 Three different off timer settings can be made You must set the clock Once first Setup Select Off Once Everyday Mon Fri Mon Sat Sat Sun or Manual to set at you convenience If you select Manual you can set up the day you want to activate the timer l Move Adjust C Enter 5 Return The v mark indicates the day is selected Sun Mon Tue Wed Thu i Sat Off Time Off Time Set the hour minute Me Locking Programme WE Security The PIN input screen appears before the setup screen Enter your 4 digit PIN the default of which is 0 0 0 0 Change the PIN using the Change PIN option e Channel Lock Off On Lock channels in Channel Manager to prevent unauthorized users such as children from watching unsuitable
3. This function provides a virtual 5 1 channel surround sound experience through a pair of speakers using HRTF Head Related Transfer Function 1100110 010 A e SRS TruDialog Off On standard sound mode only This function allows you to increase the intensity of a voice over background music or sound effects so that dialog can be heard more clearly Equalizer Adjusts the sound mode standard sound mode only e Balance L R Adjusts the balance between the right and left speaker e 100Hz 300Hz 1kHz 3kHz 10kHz Bandwidth Adjustment Adjusts the level of specific bandwidth frequencies e Reset Resets the equalizer to its default settings E Broadcast Audio Options e Audio Language digital channels only Change the default value for audio languages The available language may differ depending on the broadcast e Audio Format digital channels only When sound is emitted from both the main speaker and the audio receiver a sound echo may occur due to the decoding speed difference between the main speaker and the audio receiver In this case use the TV Speaker function Audio Format option may differ depending on the broadcast 5 1ch Dolby digital sound is only available when connecting an external speaker through an optical cable e Audio Description not available in all locations digital channels only This function handles the Audio Stream for the AD Audio Description which is sent along with the Mai
4. message appears There is a plastic smell from the set The set Signal Information is unavailable in the Self Diagnosis lest menu The set is tilted to the side Solutions and Explanations e Programme the Cable Set top box remote control to operate the set Refer to the Cable Set user manual for the SAMSUNG set code Check the supported resolution of the set and adjust the external device s output resolution accordingly his smell is normal and will dissipate over time his function is only available with digital channels from an Antenna RF Coax connection Remove the base stand from the set and reassemble it Issues There are difficulties assembling the stand base The channel menu is greyed out unavailable Your settings are lost after 30 minutes or every time the set is turned off Solutions and Explanations Make sure the set is placed on a flat surface If you can not remove the screws from the set please use a magnetized screw driver The Channel menu is only available when the set source is selected e fthe set is in the Store Demo mode it will reset audio and picture settings every 30 minutes Change the settings from Store Demo mode to Home Use mode in the Plug amp Play Initial setup procedure Press the SOURCE button to select TV mode and go to MENU System Plug amp Play Initial setup ENTER L Issues Solutions and Explanations You have
5. XI DOLBY Manufactured under licence from Dolby Laboratories Dolby and the purse double D symbol are trademarks of Dolby Laboratories Manufactured under licence under U S Patent s 5 451 942 5 956 674 5 974 380 5 978 762 6 487 535 amp other U S and worldwide patents issued amp pending DTS and the Symbol are 2 0 Digital Out registered trademarks amp DTS 2 0 Digital Out and the DTS logos are trademarks of DTS Inc Product Includes software DTS Inc All Rights Reserved DI WX DivX Certified to play DivX video up to HD 1080p including premium HD content 0 MD NV V B O Fm PDR e We lfe f ee oa nnt melc l 10 a e e e Official DivX Certified device that plays DivX video Visit www divx com for more information and software tools to convert your files into DivX video ABOUT DIVX VIDEO ON DEMAND This DivX Certified device must be registered in order to play DivX Video on Demand VOD content To generate the registration code locate the DivX VOD section in the device setup menu Go to vod divx com with this code to complete the registration process and learn more about DivX VOD PEL 200 Ora r ACO Coo 7S S24 TheaterSound SRS and the symbol are trademarks of SRS Labs S S O Inc TheaterSound TheaterSound technology is incorporated under licence from SRS Fabs Mme
6. a channel and press the TOOLS button 2 Select a function and change its settings Watch Watch the selected channel e Add to Favourites Edit Favourites Set channels you watch frequently as favourites 1 Select the Add to Favourites Edit Favourites then press the ENTERL DUHOM If the channel is already added to favourite channel Edit Favourites will be shown 2 Press the ENTER LC button to select Favourites 1 5 then press the OK gt button One favourite channel can be added in several of Favourites among Favourites 1 5 Lock Unlock Lock a channel so that the channel cannot be selected and viewed NOTE his function is available only when the Child Lock is set to On The PIN input screen appears Enter your 4 digit PIN the default of which is 0 0 0 0 Change the PIN using the Change PIN option Edit Channel Name analogue channels only Assign your own channel name Edit Channel Number Edit the number by pressing the number buttons desired Some area may not be able to support Edit Channel Name and Edit Channel Number function Delete You can delete a channel to display the channels you want Select All Deselect All Select all the channels or deselect all the selected channels in the channel manager L Retuning Channels E Antenna Air Cable Before your set can begin memorising the available channels you must specify the type of signal source that is connected to the set i e an A
7. is turned off but the sound remains on Press any button except volume button to turn on the screen e No Signal Power Off Off 15 min 30 min 60 min To avoid unnecessary energy consumption set how long you want the set to remain on if it s not receiving a signal Disabled when the PC is in power saving mode Auto Power Off Off On The set will be automatically turned off when no user operation is received for 4 hours Auto Protection Time e Auto Protection Time Off 2 hours 4 hours 8 hours 10 hours If the screen remains idle with a still image for a certain period of time defined by the user the screen saver is activated to prevent the formation of ghost images on the screen Other Features Language Menu Language Set the menu language e Preference Primary Audio Language Secondary Audio Language Primary Subtitle Language Secondary Subtitle Language Select a language which will be the default language when a channel is selected E Subtitle Use this menu to set the Subtitle mode Subtitle Off On Switches subtitles on or off Subtitle Mode Normal Hearing Impaired Sets the subtitle mode Subtitle Language Sets the subtitle language If the programme you are watching does not support the Hearing Impaired function Normal automatically activates even if the Hearing Impaired mode is selected E Digital Text Disable Enable depending on the model
8. selected device may take up to 2 minutes You cannot cancel the operation during the switching operation e f you have selected external input mode by pressing the SOURCE button you cannot use the Anynet function Make sure to switch to an Anynet device by using the Device List gt L Recording You can make a recording of a TV Programme using a Samsung recorder 1 Select Recording When there are more than two recording devices When multiple recording devices are connected the recording devices are listed Select one recording device in the Device List When the recording device is not displayed select Device List and press the M button to search devices 2 Press the EXIT button to exit You can record the source streams by selecting Recording device_name Pressing the Le REC button will record whatever you are currently watching If you are watching video from another device the video from the device is 110010 lt 10 Before recording check whether the antenna jack is properly connected to the recording device To properly connect an antenna to a recording device refer to the recording device s users manual _ Listening through a Receiver You can listen to sound through a receiver i e Home Theatre instead of the set s speaker 1 Select Receiver and set to On 2 Press the EXIT button to exit If your receiver Supports audio only it may not appear in the device list The receiver will
9. E MANUAL imagine the possibilities Thank you for purchasing this Samsung product To receive more complete service please register your product at www samsung com register Model Serial No Contents Channel Menu e Using the INFO button Now amp Next guide 3 e Using Channel menu Watch TV 4 e Retuning Channels 18 Basic Features Menu e Picture Menu 25 e Sound Menu 42 Preference Menu e System Menu e Support Menu Advanced Features Menu e How to enter USB for watching e Anynet Other Information Menu e Anti theft Kensington Lock e Troubleshooting e License 52 ial U7 102 118 120 136 2 Using the INFO button Now amp Next guide The display identifies the current channel and the status of certain audio video settings The Now amp Next guide shows daily TV programme information for each channel according to the broadcasting time Scroll lt gt to view information for a desired programme while watching the current channel Scroll A V to view information for other channels If you want to move to the currently selected channel press the ENTERL button Fri 5 Aug 6 07 pm abc 1 A Major League Baseball DINAN G 4 An a BIT f A Engish Sports 6 00pm 8 30 pm M 1 Major League Baseball MLB is the highest level of play in profession A Information v It may differ depending on the model 2 Using Channel menu Watch TV Press the CONTENT butto
10. If the programme broadcasts with digital text this feature is enabled MHEG Multimedia and Hypermedia Information Coding Experts Group An International standard for data encoding systems used in multimedia and hypermedia This is at a higher level than the MPEG system which includesdata linking hypermedia such as still images character service animation graphic and video files as well as multimedia data MHEG is user runtime interaction technology and is being applied to various fields including VOD Video On Demand ITV Interactive TV EC Electronic Commerce teleeducation tele conferencing digital libraries and network games E General Max Power Saving Off On Turn off PC monitor when PC is not used for certain length of time to reduce power consumption Game Mode Off On When connecting to a game console such as PlayStation or Xbox you can enjoy a more realistic gaming experience by selecting game mode NOTE Precautions and limitations for game mode To disconnect the game console and connect another external device set Game Mode to Off in the setup menu f you display the set menu in Game Mode the screen shakes slightly Game Mode is not available when the input source is set to TV or EG After connecting the game console set Game Mode to On Unfortunately you may notice reduced picture quality e f Game Mode is On Picture Mode is set to Standard and Sound Mode is set t
11. able box to 1080i or 120p There is no sound or e Please check the volume the of external device the sound is too low connected to your set at maximum volume Issues The picture is good but there is no sound Solutions and Explanations Set the Speaker Select option to TV speaker in the sound menu If you are using an external device make sure the audio cables are connected to the correct audio input jacks on the set If you are using an external device check the device s audio output option ex you may need to change your cable box s audio option to HDMI when you have a HDMI connected to your set If you are using a DVI to HDMI cable a separate audio cable is required If your set has a headphone jack make sure there is nothing plugged into it Issues Solutions and Explanations The speakers Check the cable connections Make sure a video cable are making an is not connected to an audio input inappropriate noise For antenna or cable connections check the signal strength Low signal level may cause sound distortion No Picture No Video The set will not turn on e Make sure the AC power cord is securely plugged in to the wall outlet and the set e Make sure the wall outlet is working e Try pressing the POWER button on the set to make sure the problem is not the remote If the set turns on refer to The remote control does not work below Issues Solutions and Explanatio
12. adcast signal received by your set is weak you can activate the Digital Noise Filter feature to reduce any static and ghosting that may appear on the screen When the signal is weak try other options until the best picture is displayed Auto Visualisation When changing analogue channels displays signal strength Only available for analogue channels When bar is green you are receiving the best possible signal e MPEG Noise Filter Off Low Medium High Auto Reduces MPEG noise to provide an improved picture quality e HDMI Black Level Normal Low Selects the black level on the screen to adjust the screen depth Available only in HDMI mode RGB signals e Film Mode Off Auto1 Auto2 Sets the set to automatically sense and process film signals from all sources and adjusts the picture for optimum quality Available in TV AV COMPONENT 480i 1080i and HDMI 480i 1080i E Reset Picture OK Cancel Resets your current picture mode to its default settings L Changing the Preset Sound Mode E Sound Mode Standard Selects the normal sound mode Music Emphasizes music over voices Movie Provides the best sound for movies Clear Voice Emphasizes voices over other sounds Amplify Increase the intensity of high frequency sound to allow a better lis tening experience for the hearing impaired L Sound Systems Etc Sound Effect e SRS TruSurround HD Off On standard sound mode only
13. al setup etc When connecting or removing the HDMI cable please make sure to search devices again or turn your set off and on again gt Check if the Anynet Function of Anynet device is set on want to start Check if the Anynet device is properly connected to the set Anynet and check if the Anynet HDMI CEC is set to On in the System menu e Press the TOOLS button to display the Anynet menu and select a menu you want want to exit Select View TV in the Anynet menu Anynet Press the SOURCE button on the set remote control and select a device other than Anynet devices e Press Y CH A CH LIST PRE CH and FAV CH to change the TV mode Note that the channel button operates only when a tuner embedded Anynet device is not connected gt The message You cannot use the remote control when you are configuring Connecting Anynet or switching to a view mode i ANES e Use the remote control when the Anynet setting or switching eae to view mode is complete appears on the screen The Anynet You cannot use the play function when Plug amp Play initial device does not setup is in progress play The connected Check whether or not the device supports Anynet functions device eine Check whether or not the HDMI cable is properly connected displayed Check whether Anynet HDMI CEC is set to On in the System menu Search Anynet devices again
14. at night time Line Set the output level for signals greater or less than 31dB reference to either 20dB or 31dB RF Set the output level for signals greater or less than 20dB reference to either 10dB or 20dB M Speaker Settings e Speaker Select External Speaker TV Speaker A sound echo may occur due to a difference in decoding speed between the main speaker and the audio receiver In this case set the speaker to External Speaker When Speaker Select is set to External Speaker the volume and MUTE buttons will not operate and the sound settings will be limited When Speaker Select is set to External Speaker e TV Speaker Off External Speaker On When Speaker Select is set to TV Speaker e TV Speaker On External Speaker Off If there is no video signal both speakers will be mute e Auto Volume Off Normal Night To equalize the volume level on each channel set to Normal Night This mode provides an improved sound experience compared to Normal mode making almost no noise It is useful at night E Reset Sound OK Cancel Reset all sound settings to the factory defaults LI Setting the Time E Time The current time will appear every time you press the INFO button Clock Setting the clock is for using various timer features of the set If you disconnect the power cord you have to set the clock again Clock Mode Set up the current time manually or automatically Auto Set the curren
15. call centres and how to download products and software L How to enter USB for watching Enjoy photos music and or movie files saved on a USB Mass Storage Class MSC device Method 1 1 Press the CONTENT button to select My Downloads 2 Press A V button to select desired menu Videos Photos Music then press the ENTERL button Source It may differ depending on the model Method 2 1 Press SOURCE button to select USB 2 Press lt P A V button to select the contens you want Videos Photos Music SV_A0001 3gp Upper Folder 1 1 1980 SV_A0002 3gp SV_A0005 3gp 1 1 1980 SV_A0006 3gp 1 1 1980 SV_A0007 3gp 1 1 1980 SV_A0008 3gp 1 1 1980 SV_A0009 3gp 1 1 1980 SV_A0020 mp4 SV_A0022 mp4 1 1 1980 1 1 1980 then press ENTERC button P ae A Tools 9 Return LI Connecting a USB Device 1 Turn on your set Side Panel 2 Connect a USB device containing photo music and or movie files to the USB jack on the side of the set 3 When USB is connected to the set popup window appears Then you can select Connected Device It may differ depending on the model USB HDD is not supported It might not work properly with unlicensed multimedia files Need to Know List before using My Downloads e MIP Media Transfer Protocol is not supported e The file system supports FAT16 FAT32 and NTFS e Certain types of USB D
16. ct or the channels are unavailable Adjust your antenna to increase signal strength Troubleshooting If the set seems to have a problem refer to this description If none of these troubleshooting tips apply contact the Samsung customer service centre E Software Upgrade Software Upgrade can be performed via a broadcasting signal or by network connection or downloading the latest firmware from www samsung com to a USB memory device Current Version is the software already installed in the set Software is represented as Year _ eS stim Month Day_Version It may differ depending on the model Installing the Latest Version By USB Insert a USB drive containing the firmware upgrade file downloaded from www samsung com into the set Please be careful not to disconnect the power or remove the USB drive until upgrades are completed The set will be turned off and on automatically after completing It may differ depending on the model the firmware upgrade When software is upgraded video and audio settings you have made will return to their default settings We advise you to to write down your settings so that you can easily reset them after the upgrade Side Panel e Alternative Software backup This feature is not available Contact Samsung View this information when your set does not work properly or when you want to upgrade the software You can find information regarding our
17. d some of them may not be recognized A USB device that requires high power more than 500mA or 5V may not be supported f an over power warning message is displayed while you are connecting or using a USB device the device may not be recognized or may malfunction f the set has been no input during time set in Auto Protection Time the Screensaver will run e The power saving mode of some external hard disk drives may be released automatically when connected to the set e fa USB extension cable is used the USB device may not be recognized or the files on the device may not be read e lf a USB device connected to the set is not recognized the list of files on the device is corrupted or a file in the list is not played connect the USB device to the PC format the device and check the connection e fa file deleted from the PC is still found when My Downloads is run use the Empty the Recycle Bin function on the PC to permanently delete the file L Screen Display Move to the desired file using the VA aw Vm buttons and then press the ENTERL or gt Play button The file is played My Downloads screen may differ depending on the way to enter the screen 2 2 pages i Information You can ascertain the a e oa selected device name ee Mors forme contents mode folder Now mThat Bitch file name page and Ja File List Section sorting list Stand By Me You can conf
18. e Zoom e Zoom Position Adjust the picture size and position It is only available in Zoom NOTE e After selecting Screen Fit in HDMI 1080i 1080p or Component 1080i 1080p mode you may need to centre the picture 1 Press the A or V button to select Position 2 Press the ENTER G button 3 Press the A V lt or P button to move the picture Depending on the input source the picture size options may vary The available items may differ depending on the selected mode In PC mode only 16 9 and 4 3 modes can be adjusted Settings can be adjusted and stored for each external device connected to an input on the set If you use the Screen Fit function with HDMI 720p input 1 line will be cut at the top bottom left and right as in the overscan function e PC Screen Adjustment It is available in PC mode Coarse Fine Removes or reduces picture noise If the noise is not removed by Fine tuning alone then adjust the frequency as best as possible Coarse and Fine tune again After the noise has been reduced readjust the picture so that it is aligned to the centre of screen Position Adjust the PC s screen positioning if it does not fit the screen Press the A or V button to adjust the Vertical Position Press the lt or button to adjust the Horizontal Position Image Reset Resets the image to default settings Auto Adjustment Adjust frequency values positions and fine tune the settings aut
19. e available Recording Starts recording immediately using the recorder This is only recorder available for devices that support the recording function Stop Recording lt recorder Stops recording Receiver Sound is played through the receiver If more than one recording device is connected they are displayed as recorder and if only one recording device is connected it will be represented as device_name LI Setting Up Anynet E Setup Anynet HDMI CEC Off On To use the Anynet Function Anynet HDMI CEC must be set to On When the Anynet HDMI CEC function is disabled all the Anynet related operations are deactivated Auto Turn Off No Yes Setting an Anynet Device to turn off automatically when the set is turned off gt If Auto Turn Off is set to Yes running external devices will turn off at the same time as the set powers off However a device may not turn off if recording is in progress Z May not be enabled depending on the device Switching between Anynet Devices Press the TOOLS button then select Anynet HDMI CEC Anynet devices connected to the set are listed in Device List If you cannot find a device you want press the M button to refresh the list Select a device and press the ENTERL button You can switch to the selected device Only when you set Anynet HDMI CEC to On in the System menu the Device List menu appears Switching to the
20. eatre When following the connection above the Optical jack only outputs 2 channel audio You will only hear sound from the Home Theatre s Front Left and Right speakers and the subwoofer If you want to hear 5 1 channel audio connect the DIGITAL AUDIO OUT OPTICAL jack on the DVD Satellite Box i e Anynet Device 1 or 2 directly to the Amplifier or Home Theatre not the set Only one Home Theatre can be connected You can connect an Anynet device using the HDMI cable Some HDMI cables may not support Anynet functions Anynet works when the AV device supporting Anynet is in the standby or on status Anynet supports up to 12 AV devices in total Note that you can connect up to 3 devices of the same type Anynet Menu The Anynet menu changes depending on the type and status of the Anynet devices connected to the set View TV Changes Anynet mode to TV broadcast mode Device List Shows the Anynet device list device_name Shows the connected device menus E g If a DVD recorder is MENU connected the disc menu of the DVD recorder will appear Shows the play menu of the connected device E g If a DVD recorder is connected the play menu of the DVD recorder will appear gt CAS Tools Shows the title menu of the connected device E g If a DVD device_name recorder is connected the title menu of the DVD recorder will Title Menu appear Depending on the device this menu may not b
21. ed digital channel Press the W Programme View button Press the A Y buttons to select the desired programme then press the Information button Select Timer Viewing then press the ENTER L button when done If you want to cancel Timer Viewing follow steps 1 through 3 Select Cancel Schedules y S E Channel Manager Add or edit the favourite channel and set the channels to Lock Delete Deselect All or Select All You can edit the channel name only for analogue channels Channels Shows the channel Channel Manag P me list according to channel type mu a o r Favourites 1 5 Shows n T F favourites channels mee ax Using the colour buttons with the nn o EMER itclatc e e ir n o A Red Antenna Switches to E ge C Select Tools 5 gt Retum Air Cable It may differ depending on the model e D Blue Sorting Changes the list ordered by number or name NOTE Itis not available in analogue channel Channel Status Display Icons ICON V G A Operations An analogue channel A channel selected A channel set as a favourite A locked channel Displays the Channel Manager option menu Channel Manager Option Menu Set each channel using the Channel Manager menu options Watch Add to Favourites Edit Favourites Lock Unlock Edit Channel Name Edit Channel Number Delete Select All Deselect All Option menu items may differ depending on the channel status 1 Select
22. ee the User manual supplied with the locking device he locking device has to be purchased separately The location of the Kensington slot may be different depending on the set model Q Troubleshooting If you have any questions about the set first refer to this list If none of these troubleshooting tips apply please visit www samsung com then click on Support or contact the call centre listed on the back cover of Users Manual eee pe AE R T eS A olrelarciile ns FECAL ISALI Iw Issues The set image does not look as good as it did in the store Solutions and Explanations If you have an analogue cable set top box upgrade to a digital set top box Use HDMI or Component cables to deliver HD high definition picture quality Cable Satellite subscribers Try HD stations from the channel line up Antenna connection Iry HD stations after performing Auto programme Many HD channels are up scaled from SD Standard Definition contents Adjust the Cable Set top box video output resolution to T080 0r T20p Make sure you are watching the set at the minimum recommended distance based on the size and definition of the signal Issues The picture is distorted macroblock error small block dots pixelization Colour is wrong or missing Solutions and Explanations e Compression of video contents may cause picture distortion especially in fast moving pictures such as sports and action mov
23. gramme gt Page Move to next or previous page EEE When selecting the current programme you can watch the selected programme When selecting the future programme you can reserve to watch the selected programme To cancel the schedule press the ENTERL button again and select Cancel Schedules E Schedule Manager Cancel or set the Timer Viewing to display the channel you want at the intended time Using Timer Viewing You can set a desired channel to be displayed automatically at the intended time Set the current time first to use this function 1 Press the ENTERL button on the Schedule Manager screen 2 Press the ENTERL4 button to add manual booking 3 Press the lt A button to set the Antenna Channel Repeat Date Start Time e Antenna Air or Cable will be displayed depending on the Antenna setting gt e Channel Select the desired channel e Repeat Select Once Manual Sat Sun Mon Fri or Everyday to set at your convenience The VW mark indicates the day is selected e Date You can set desired date It is available when you select Once in Repeat e Start Time You can set start time you want If you want to edit or cancel the schedule select the reserved schedule on the Reserved programmes and select the Edit or Cancel Schedules Channel List You can view channel information All TV Radio Data Other Analogue or Favourites 1 5 nA The Daily When you pres
24. ies Low signal level or bad quality can cause picture distortion This is not a set issue e Mobile phones used close to the set up to 3 3ft may cause noise in picture on analogue and digital channel e f you re using a component connection make sure the component cables are connected to the correct jacks Incorrect or loose connections may cause colour problems or a blank screen Issues There is poor colour or brightness There is a dotted line on the edge of the screen The picture is black and white Solutions and Explanations e Adjust the Picture options in the set menu go to Picture mode Colour Brightness Sharpness e Adjust Energy Saving option in the set menu go to MENU System ECO solution Energy Saving ry resetting the picture to view the default picture settings go to MENU Picture Reset Picture e fthe picture size is set to Screen Fit change it to 16 9 e Change cable set top box resolution If you are using an AV composite input connect the video cable yellow to the Green jack of component input 1 on the set gt lt any Ae ap eee ee pay Are Issu a VU uTIONS anda EX olar ations When changing le If connected with a cable box please try to reset the channels the picture cable box Reconnect the AC cord and wait until the freezes or is distorted cable box reboots It may take up to 20 minutes or delayed e Set the output resolution of the c
25. igital camera and audio devices may not be compatible with this set My Downloads only supports USB Mass Storage Class MSC devices MSC is a Mass Storage Class Bulk Only Transport device Examples of MSC are Thumb drives Flash Card Readers and USB HDD USB HUB are not gt supported Devices should be connected directly to the set s USB port Before connecting your device to the set please back up your files to prevent them from damage or loss of data SAMSUNG is not responsible for any data file damage or data loss Do not disconnect the USB device while it is loading The higher the resolution of the image the longer it takes to display on the screen The maximum supported JPEG resolution is 15360X8640 pixels For unsupported or corrupted files the Not Supported File Format message is displayed If the files are sorted by Basic View up to 1000 files can be displayed in each folder e MP3 files with DRM that have been downloaded from a non free site cannot be played Digital Rights Management DRM is a technology that supports the creation distribution and management of the content in an integrated and comprehensive way including the protection of the rights and interests of the content providers the prevention of the illegal copying of contents as well as managing billings and settlements f more than 2 PTP devices are connected you can only use one at a time f more than two MSC devices are connecte
26. intermittent Check the cable connections and reconnect them loss of audio or video Loss of audio or video can be caused by using overly rigid or thick cables Make sure the cables are flexible enough for long term use If mounting the set to the wall we recommend using cables with 90 degree connectors You see small particles This is part of the product s design and is not a defect when you look closely at the edge of the frame of the set The PIP menuisnot PIP functionality is only available when you are using a available HDMI PC or components source Issues Solutions and Explanations The message e fyou are using a CAM CARD CI Cl check that it is Scramble signal installed into the common interface slot or Weak Signal No f there is still a problem pull the CAM CARD out of the Signal appears set and insert it into the slot again There are recurrent Check and change the signal source picture sound issues A reaction may occur To prevent this use felt pads on any surface of the set between the rubber that comes in direct contact with furniture cushion pads on the base stand and the top finish of some furniture This TFT LCD panel uses a panel consisting of sub pixels which require sophisticated technology to produce However there may be a few bright or dark pixels on the screen These pixels will have no impact on the performance of the product ie i ox aE
27. ir Cable system Auto Tuning Scans for a channel automatically and stores in the set Automatically allocated programme numbers may not correspond to actual or desired programme numbers If a channel is locked the PIN input window appears e Antenna Source Air Cable Select the antenna source to memorise When Antenna Source is set to Air e Channel Source Digital amp Analogue Digital Analogue Select the channel source to memorise When Antenna Source is set to Cable e When selecting Cable Analogue Provide a value to scan for cable channels Manual Tuning Scans for a channel manually and stores in the set If a channel is locked the PIN input window appears According to channel source Manual Tuning may be supported When Antenna Source is set to Air or Cable e Digital Channel Tuning When scanning has finished channels are updated in the channel list When selecting Antenna Air Channel Frequency Bandwidth e Analogue Channel Tuning Programme Colour System Sound System Channel Search Store If there is abnormal sound or no sound reselect the sound standard required Channel mode e P programme mode When tuning is complete the broadcasting stations in your area have been assigned to position numbers from PO to P99 You can select a channel by entering the position number in this mode e C aerial channel mode S cable channel mode These two modes allow yo
28. irm the A Sucker For Your Sound i files and groups that are Oet 152010 sorted by category Page H Tools 5 Return Contents mode Device name E L Operation Buttons You can select the desired E Yellow Edit Mode Selects the desired music The check box is Contents mode or Device name shown in the screen to check the music you want It is only available in Music lt lt gt gt Page Move to next or previous page 4 Tools Displays the option menu 5 Return Move to the previous step E Videos Playing Video 1 Press the gt A F button to a select the desired Vilo a10 in the file a EE list 2 Press the ENTERLC button or gt Play button he selected file name is displayed on the top with its playing time f video time information is unknown play time and progress bar are not displayed During video playback you can search using lt and gt button You can use lt lt REW and gt gt FF buttons during playback When connecting to the PC through network the lt lt and gt gt buttons are not available In this mode you can enjoy movie clips contained on a Game but you cannot play the Game itself e Supported Subtitle Formats MPEG 4 time based text SAMI SubRip SubViewer Micro DVD e Supported Video Formats avi mkv AVI MKV H 1920 x 1080 6 30 8 XviD 1920 x 1080 6 30 8 da
29. mic Contrast Off Low Medium High Adjust the screen contrast Shadow Detail Increase the brightness of dark images Disabled under PC mode e Gamma Adjust the primary colour intensity RGB Only Mode Off Red Green Blue Displays the Red Green and Blue colour for making fine adjustments to the hue and saturation Colour Space Auto Native Adjust the range of colours available to create the image White Balance Adjust the colour temperature for a more natural picture R Offset G Offset B Offset Adjust each colour s red green blue darkness R Gain G Gain B Gain Adjust each colour s red green blue brightness Reset Resets the White Balance to it s default settings Flesh Tone Emphasize pink Flesh Tone Edge Enhancement Off On Emphasize object boundaries Motion Lighting Off On Reduce power consumption by brightness control adapted motion Picture Options In PC mode you can only make changes to the Colour Tone e Colour Tone Cool Normal Warm1 Warm2 Warm1 or Warm2 will be L deactivated when the picture mode is Dynamic Settings can be adjusted and stored for each external device connected to an input on the set Colour Tone Normal Digital Noise Filter Auto MPEG Noise Filter Auto Film Mode Off a Move Enter 5 Return e Digital Noise Filter Off Low Medium High Auto Auto Visualisation If the bro
30. n audio from the broadcaster Audio Description Off On Turn the audio description function on or off Volume Adjust the audio description volume E Additional Setting digital channels only DTV Audio Level MPEG HE AAC This function allows you to reduce the disparity of a voice signal which is one of the signals received during a digital TV broadcast to a desired level According to the type of broadcast signal MPEG HE AAC can be adjusted between 10dB and OaB To increase or decrease the volume adjust between the range O and 10 respectively SPDIF Output SPDIF Sony Philips Digital InterFace is used to provide digital sound reducing interference going to speakers and various digital devices such as a DVD player Audio Format During the reception of a digital TV broadcast you can select the Digital Audio output SPDIF format from the options PCM or Dolby Digital By connecting to 5 1ch speakers in a Dolby Digital setup maximize your Interactive 3D sound experience Audio Delay Correct audio video sync problems when watching TV or video and when listening to digital audio output using an external device such p gt as an AV receiver e Dolby Digital Comp Line RF This function minimizes signal disparity between a dolby digital signal and a voice signal i e MPEG Audio HE AAC ATV Soung Select Line to obtain dynamic sound and RF to reduce the difference between loud and soft sounds
31. n to select Watch TV then select the desired menu Each screen will be displayed E Guide The EPG Electronic Programme Guide information is provided by broadcasters Using programme schedules provided by broadcasters you can specify programmes you want to watch in advance so that the channel M oe automatically changes to the selected programme channel at the specified time Programme entries may appear blank or out of date depending on a x It may differ depending on the model channel status Using Channel View _ DTV Air 800 five Home and Away gt I 6 00 pm 6 30 pm Drama Dani is devastated when scott makes clear his views on marriage Today 6 00 pm 6 30 pm 7 00 pm 27 Discovery American Chopper Tine Team 28 DiscoveryH amp L Programmes resume at 06 00 800 five No Information ives Dark Angel 24 __ price drop tv No Information 16 QVC QVC Selection v 6 R4DTT No Information W Sche Mgr 24 Hours W Ch Mode H Information Page Watch It may differ depending on the model ooo 6 8 W Red Schedule Manager Moves to the Reserved programmes in Schedule Manager E Yellow 24 Hours Viewing the list of programmes to be broadcasted after 24 hours 5 Blue Ch Mode Select the type of channels you want to display on the Channel List window All TV Radio Data Other Analogue Favourites 1 5 Information Displays details of the selected pro
32. nalogue TV AV modes of the PAL system the Tint G R function is not available n PC mode you can only make changes to Backlight Contrast Brightness and Sharpness e Settings can be adjusted and stored for each external device connected P to the set M Screen Adjustment Set the various picture options such as picture size and aspect ratio e Picture Size Your cable box satellite receiver may have its own set of screen sizes as well However we highly recommend you use 16 9 mode most of the time Auto Wide depending on the model Automatically adjusts the picture size to the 16 9 aspect ratio 16 9 Sets the picture to 16 9 wide mode Wide Zoom Magnifies the picture size more than 4 3 Adjusts the Position by using A V buttons Zoom Magnifies the 16 9 wide pictures vertically to fit the screen size Adjusts the Position or Size by using A V button 4 3 Sets the picture to basic 4 3 mode Do not watch in 4 3 format for a long time Traces of borders displayed on the left right and centre of the screen may cause image retention screen burn which are not covered by the warranty Screen Fit Displays the full image without any cut off when HDMI 720p 10801 1080p or Component 1080 1080p signals are input NOTE The picture size can vary depending on the input resolution when content is played using Videos under My Downloads e Position Adjust the picture position It is only available in Wid
33. ns The set turns off Ensure the Sleep Timer is set to Off in the System automatically menu e f your PC is connected to the set check your PC power settings e Make sure the AC power cord is plugged in securely to the wall outlet and the set When watching set from an antenna or cable connection the set will turn off after 10 15 minutes if gt there is no signal Issues Solutions and Explanations There is no picture Check cable connections remove and reconnect all Wile S10 cables connected to the set and external devices Set your external devices Cable Set top Box DVD Blu ray etc video outputs to match the connections to the set input For example if an external device s output is HDMI it should be connect to an HDMI input on the set Make sure your connected devices are powered on Be sure to select the set s correct source by pressing the SOURCE button on the set remote control Issues Solutions and Explanations RF Cable Antenna Connection The set is not Make sure the Antenna cable is connected securely receiving all channels e Please try Plug amp Play Initial setup to add available channels to the channel list Go to MENU System Plug amp Play Initial setup and wait for all available channels to be stored e Verify the Antenna is positioned correctly The picture is Compression of video contents may cause picture distorted macro block distortion es
34. o Movie Menu Transparency Bright Dark Set the Transparency of the menu Boot Logo Off On Display Samsung logo when the set is turned on Anynet HDMI CEC For details on set up options refer to the Anynet HDMI CEC instructions E DivX Video On Demand Shows the registration code authorized for the set If you connect to the DivX web site and register you can download the VOD registration file If you play the VOD registration using My Downloads the registration is completed For more information on DivX VOD visit http vod divx com E e Manual You can read the introduction and instructions about the set features stored in your set For the detailed information about e Manual Screen refer to How to view the e Manual in User Manual E Self Diagnosis Self Diagnosis might take few seconds this is part of the normal operation of the set e Picture Test Yes No Use to check for picture problems Sound Test Yes No Use the built in melody sound to check for sound problems If you hear no sound from the speakers before performing the sound test make sure Speaker Select is set to TV Speaker in the Speaker Settings menu The melody will be heard during the test even if Speaker Select is set to External Speaker or the sound is muted by pressing the MUTE button Signal Information digital channels only HDTV channel s reception quality is either perfe
35. omatically It is available in PC mode Not available when connecting through HDMI DVI cable Using Your set as a Computer PC Display Setting Up Your PC Software Based on Windows XP Depending on the version of Windows and the video card the actual screens on your PC will probably look different but the same basic set up information will apply in most cases If not contact your computer manufacturer or Samsung Dealer gt Click on Control Pane on the Windows start menu Click on Appearance and Themes in the Control Panel window and a display dialog box will appear Click on Display and a display dialog box will appear Navigate to the Settings tab on the display dialog box he corect size setting resolution e f a verical freguency option exists on your display settings dialog box the correct value is 60 or 60 Hz Otherwise just click OK and exit the dialog box L Changing the Picture Options E Advanced Settings available in Standard Movie mode You can adjust the detailed setting for the screen including colour and contrast In PC mode you can only make changes to Gamma and White Balance e Black Tone Off Dark Darker Darkest Select the black level to adjust the screen depth Black Tone Dynamic Contrast Shadow Detail Gamma RGB Only Mode Colour Space White Balance sofi Medium 10 10 TOf Move Enter 5 Return Dyna
36. pecially with fast moving pictures such as error small block sports and action movies dots pixelization e A low signal can cause picture distortion This is not a set issue Issues A Mode Not Supported message appears PC is always shown on the source list even if a PC is not connected The video is OK but there is no audio Solutions and Explanations e Set your PC s output resolution and frequency so they match the resolutions supported by the set e This is normal PC is always shown on the source list regardless of whether a PC is connected e lf you are using a HDMI connection check the audio output setting on your PC Issues Solutions and Explanations Others The picture will not HD channels will have black bars on either side of the display in full screen screen when displaying up scaled SD 4 3 contents e Black bars on the top and bottom will appear during movies that have aspect ratios different from your set e Adjust the picture size options on your external device or set to full screen lt The remote control Replace the remote control batteries with the poles gt does not work in the right direction e Clean the sensor s transmission window on the remote e ry pointing the remote directly at the set from 5 6 feet away Issues The cable set top box remote control does not turn the set on or off or adjust the volume A Mode Not Supported
37. programme Available only when the Inout source is set to TV e Change PIN Change your personal ID number required to set up the set If you forget the PIN code press the remote control buttons in the fol lowing sequence in Standby mode which resets the PIN to 0 0 0 0 MUTE 8 2 4 POWER on Q Picture In Picture PIP E PIP You can watch TV and one external video source simultaneously PIP Picture in Picture does not function in the same mode Novi For PIP sound refer to the Sound Select instructions f you turn the set off while watching in PIP mode the PIP window will disappear gt You may notice that the picture in the PIP window becomes slightly unnatural when you use the main screen to view a game or karaoke PIP settings Main picture Sub picture Component HDMI PC TV PIP Off On Activate or deactivate the PIP function Air Cable Select the proper input source for the sub screen Channel Select the channel for the sub screen Size l _ l Select a size for the sub picture Position L_7 F_ k l Select a position for the sub picture Sound Select Main Sub You can choose the desired sound Main Sub in PIP mode Economical Solutions Eco Solution Energy Saving Off Low Medium High Picture Off 08 This ad justs the brightness of the set in order to reduce power consumption If you select Picture Off the screen
38. rts ba 1920 x 1080 6 30 25 MPEG4 SP ASP 1920 x 1080 6 30 8 Motion JPEG 640 x 480 6 30 8 MeS ACS LPCM ADPCM DTS Core Divx 3 11 4 1920x1080 6 30 8 x 5 1 6 0 XviD 4920x1080 6 30 8 ET TE H 264 BP MP LPCM ADPCM a aoe AE eo20 1060 mn 230 25 HP WMA MPEG4 SP ASP 1920x1080 6 30 8 Motion JPEG 640x480 6 30 8 Window Media nia ASF 1920x1080 6 30 25 WMA Video v9 H 264 BP MP 4920x1080 6 30 25 HP MP3 ADPCM s MPEG4 SP mp4 MP4 1920x1080 6 30 8 e ASP XVID 1920x1080 6 30 8 H 264 BP MP 4920x1080 6 30 25 HP ADPCM AAC 0p SGRE Vias ezES HE AAC 1920x1080 6 30 8 ASP MPEG2 1920x 1080 24 25 30 30 VRO AC3 MPEG a LPCM VOB MPEG1 1920x 1080 24 25 30 30 MPEG1 1920 x 1080 24 25 30 20 mpg AC3 MPEG PS MPEG2 1920x1080 24 25 30 lt i mpeg LPCM AAC H 264 1920 x 1080 6 30 25 MPEG2 1920 x 1080 24 25 30 20 a6 AC3 AAC O TS H 264 1920 x 1080 6 30 PAS MPS DD SO HE AAC VC1 1920 x 1080 6 30 25 Real Audio rmvb RMVB RV3 0 RV 1920 x 1080 30 1O ope Ve gt Other Restrictions NOTE f there are problems with the contents of a codec the codec will not be S10 ele ars ep e fthe information for a Container is incorrect and the file is in error the Container will not be able to play correctly So
39. s the CH LIST Pros vs button on the remote control AE Channel List screen will be displayed at once e All Shows all currently available channels It may differ depending on the model TV Shows all currently available digital channels Radio Shows all currently radio channels Data Other Shows all currently available MHP or other channels Analogue Shows all currently available analogue channels Favourites 1 5 Shows all favourite channels Favourites 1 5 will be displayed when you set Add to Favourites If you want to view favourite channels you added press the CH LIST button and use 4 gt Ch Mode button to move Favourites 1 5 Using the colour buttons with the Channel List o H Red Antenna Switches to Air or Cable o Yellow Program View Channel View Displays the programme when digital channel is selected Returns to the channel view 4 gt Ch Mode Move to the All TV Radio Data Other Analogue or Favourites 1 5 Displays the Favourite when Add to Favourites is set L Watch Watches the channel you select gt Page Move to next or previous page Channel Status Display Icons Icon Operations An analogue channel A reserved programme m A locked channel How to use Timer Viewing in Channel List digital channels only When you set the Timer Viewing in Channel List you can only set the programme in Programme View 1 Press the CH LIST button then select a desir
40. t time automatically using the time from a digital channel The antenna must be connected in order to set the time automatically Manual Set the current time manually Depending on the broadcast station and signal the auto time set up may not be correct In this case set the time manually Clock Set Set the Year Month Day Hour and Minute manually Available only when Clock Mode is set to Manual LJ Using the Sleep Timer e Sleep Timer A Automatically shuts off the set after a preset period of time 80 60 90 120 150 and 180 minutes To cancel Sleep Timer select Off LI Setting the On Off Timer On Timer 1 On Timer 2 On Timer 3 Three different on timer settings can Ras ARETE ieee be made You must set the clock first Once gt On Time Volume 04 00 am 20 Source Antenna Channel TV C Enter Return Setup Select Off Once Everyday Mon Fri Mon Sat Sat Sun or Manual to set at your convenience If you select Manual you can set up the day you want to activate the timer The Y mark indicates the day is selected On Time Set the hour minute Volume Set the desired volume level Source Select TV or USB content to be played when the set is turned on automatically USB can be selected only when a USB device is connected to the set Antenna when the Source is set to TV Select a proper antenna source Channel when the Source is set to TV Select the desired channel
41. tting You can play the video with Subtitles This function only works if the subtitles are the same file name as the video Subtitle Language You can enjoy video in one of supported languages as required The function is only enabled when stream type files which support multiple audio formats are played Start Slide Show Pause Slide Show You can start or pause a Slide Show Slide Show Speed You can select the slide show speed during the slide show Background Music You can on off background music when watching a Slide Show Background Music Setting You can select background music when watching a Slide Show Zoom You can zoom into images in full screen mode Rotate You can rotate images in full screen mode Information You can see detailed information about the played file What is Anynet Anynet is a function that enables you to control all connected Samsung devices that support Anynet with your Samsung set s remote The Anynet system can be used only with Samsung devices that have the Anynet feature To be sure your Samsung device has this feature check if there is an Anynet logo on it For the method of connecting external devices refer to the supported user manual NOTE Connect the Optical cable between the DIGITAL AUDIO OUT OPTICAL jack on your set and the Digital Audio Inout on the Home Th
42. u to select a channel by entering the assigned number for each aerial broadcasting station or cable channel M Guide Type depending on the model Select to use either the built in or downloaded guide Guide Set the built in the guide to be displayed when the GUIDE button on the remote control is pressed e Auto Set the set to select the proper Guide automatically when the GUIDE button on the remote control is pressed E Fine Tune analogue channels only If the signal is weak or distorted fine tune the channel manually Fine tuned channels are marked with an asterisk To reset the fine tuning select Reset E LNA If the set is operating in a weak signal area the LNA function can improve the reception a low noise preamplifier boosts the incoming signal m Z Changing the Preset Picture Mode Picture Mode Select your preferred picture type In PC mode you can only make changes to the Entertain and Standard Dynamic Suitable for a bright room Standard Suitable for a normal environment Movie Suitable for watching movies in a dark room Entertain Suitable for watching movies and games It is only available in PC mode 2 Adjusting Picture Settings E Samsung MagicAngle Off On Select angle that best suits your viewing position Backlight Contrast Brightness Sharpness Colour Tint G R Your set has several setting options for picture quality control NOTE n a
43. und or video may not work if the contents have a standard bit rate frame rate above the compatible Frame sec listed in the table above e fthe Index Table is in error the Seek Jump function is not supported The videos over 10Mbps bit rate may be interrupted Supports up to H 264 Level 4 1 Supports up to WMA 7 8 9 STD 9 PRO H 264 FMO ASO RS VC1 SP MP APL4 WMA Lossless Voice Lossless Voice is and AVCHD are not supported not supported XVID MPEG4 SP ASP e WMA sampling rate 22050Hz mono is not Below 1280 x 720 60 frame max supported Above 1280 x 720 30 frame max r GMC is not support E Photos Viewing a Photo or Slide Show 1 HESS the ae VAA button iO s IO ozas AID an al select the desired photo in the file list Press the ENTERL button e When a selected photo is displayed press the ENTERL button to start the slide show During the slide show all files in the file list will be displayed in order L When you press the gt Play button in the file list slide show will be started immediately Music files can be automatically played during the Slide Show if the Background Music is set to On The BGM Mode cannot be changed until the BGM has finished loading E Music Playing Music 1 Press alsin Aa Ve button to select the desired Music in the file list I m Not Alone Calvin Harris I m Not Alone Hip pop Press the ENTERLC b
44. utton or gt oe Play button ag 4 5MB You can use lt lt REW 024 0810 and gt gt FF buttons during playback FlTools gt Return Only displays the files with MP3 and PCM file extension Other file K extensions are not displayed even if they are saved on the same USB device If the sound is abnormal when playing MP3 files adjust the Equalizer in the Sound menu An over modulated MP3 file may cause a sound ecele 00m Playing selected music Press the W Edit Mode button 2 Select the desired music The check box appears to the left of the selected files 3 Press the TOOLS button and select Play Selected Contents You can select or deselect all music pressing the Select All Deselect All L My Downloads Additional Functions Videos Music Photos Play Option menu It may differ depending on the model and source During playing a file press the TOOLS button her fil Title Search ve can move the other file 7 directly You can search the video using lt and gt button at one minute Ue soil interval or entering the number x directly Shuffle Mode You can play the music VY randomly Repeat Mode You can play movie and music 7 7 files repeatedly Picture Size You can adjust the picture size to your preference Picture Mode You can adjust the picture setting Sound Mode You can adjust the sound setting Subtitle Se
45. work when you have properly connected the optical in jack of the receiver to the DIGITAL AUDIO OUT OPTICAL jack of the set gt L When the receiver i e Home Theatre is set to On you can hear sound output from the set s Optical jack When the set is displaying a DTV air signal the set will send out 5 1 channel sound to the receiver When the source is a digital component such as a DVD and is connected to the set via HDMI only 2 channel sound will be heard from the receiver NOTE You can only control Anynet devices using the set remote control not the buttons on the set he set remote control may not work under certain conditions If this occurs reselect the Anynet device The Anynet functions do not operate with other manufacturers products L Troubleshooting for Anynet Anynet does not Check if the device is an Anynet device The Anynet system work supports Anynet devices only Only one receiver Home Theatre can be connected e Check if the Anynet device power cord is properly connected Check the Anynet device s Video Audio HDMI cable connections Check whether Anynet HDMI CEC is set to On in the System menu Anynet does not Check whether the set remote control is in TV mode work Check whether the remote control is Anynet compatible e Anynet does not work in certain situations Searching channels operating My Downloads or Plug amp Play initi
Download Pdf Manuals
Related Search