Home

Samsung T24B350AH User Manual

image

Contents

1. Time Sleep Timer ENTERC 4 e Sleep Timer Geka Automatically shuts off the TV after a preset period of time off 30 60 90 120 150 and 180 minutes To cancel Sleep Timer select Off A Setting the On Off Timer MENU System Time On Timer lt or gt Off Timer ENTERL On Timer 1 On Timer 2 On Timer 3 Three different on timer settings can be made You must set the clock first Setup Select Off Once Everyday Mon Fri Mon Sat Sat Sun or Manual to set at your convenience If you select Manual you can set up the day you want to activate the timer The Y mark indicates the day you ve selected Time Set the hour and minute Volume Set the desired volume level Source Select desired source to be played when the TV is turned on automatically USB can be selected only when a USB device is connected to the TV Aerial when the Source is set to TV Select a proper aerial Channel when the Source is set to TV Select the desired channel Music Photo when the Source is set to USB Select a folder in the USB device containing music or photo files to be played when the TV is turned on automatically NOTE f there is no music file on the USB device or the folder containing a music file is not selected the timer function does not operate correctly When there is only one photo file in the USB device the slide show will not play Ifa folder name is too long the folder cann
2. When changing channels the picture freezes or is distorted or delayed There is no sound or the sound is too low at maximum volume The picture is good but there is no sound If connected with a cable box please try to reset the cable box Reconnect the AC cord and wait until the cable box reboots It may take up to 20 minutes Set the output resolution of the cable box to 1080i or 720p Please check the volume of the device Cable Sat Box DVD Blu ray etc connected to your TV Set the Speaker Select option to TV Speaker in the sound menu If you are using an external device make sure the audio cables are connected to the correct audio input jacks on the TV If you are using an external device check the device s audio output option ex you may need to change your cable box s audio option to HDMI when you have a HDMI connected to your TV If you are using a DVI to HDMI cable a separate audio cable is required Reboot the connected device by reconnecting the device s power cable If your TV has a headphone jack make sure there is nothing plugged into it The speakers are making an inappropriate noise The TV will not turn on The TV turns off automatically Check the cable connections Make sure a video cable is not connected to an audio input For antenna or cable connections check the signal strength Low signal level may cause sound distortion Make sure the AC power cord is securel
3. Edit Channel Name analogue channels only Assign your own channel name Edit Channel Number Edit the number by pressing the number buttons desired Delete You can delete a channel to display the channels you want Information Displays details of the selected programme e Sort digital channels only Change the list ordered by channel name or channel number Change Antenna Switches to Air or Cable Edit Mode You can select desired channels and edit it Using Option Menu in Edit Mode Set each channel using the menu options Edit Favourites Lock Unlock Delete Information Deselect Select All 1 Press the TOOLS button in Channel List screen then select the Edit Mode A check box appears to the left of the channel 2 Press the A V buttons to select the desired channel then press the ENTERL4 button The v mark indicates the channel you ve selected You can select more than one channel Press the ENTER L again deselects the channel 3 Press the TOOLS button then select a function and change its settings Edit Favourites Set the selected channels you watch frequently as favourites The Edit Favourites screen has five groups Favourites 1 Favourites 2 etc You can add a favourite channel to any one of the groups Press the A V buttons to select a group Lock Unlock Lock a channel so that the channel cannot be selected and viewed This function is available only when the Channel Lock is set t
4. e Media Play only supports sequential joeg format The scene search and thumbnail functions are not supported in the Videos f the number of files and folders saved on a USB storage device is approximately over 4000 the files and folders may not appear and some folders may not be opened How to Remove USB Devices Safely Select the desired USB device and press the TOOLS button Then select Safely Remove USB Device L Screen Display Move to the desired file using the VA am Vm buttons and then press the ENTERL or gt Play button The file is played The screen may differ depending on the way to enter the screen The displayed image may differ depending on the model Information 5 Media Play Videos BEE Cruzer Video _02 AvI ms You can ascertain a the selected device 4 dps Tees f E UrperFoider R w Displays the selected Video 02 Video_03 file information mode folder name E 1 Jan 2012 E 1 Jan 2012 and paoe a oes i ES eee ee ei File List Section You can confirm the DLL files and groups that TEE T sorted by category y gory Operation Buttons Play Play the selected file a Tools Displays the option menu 5 Return Move to the previous step E Videos Playing Video 1 Press the lt A V button to select the desired video in the file list 2 Press the ENTERL button or Play button The selected file name is displayed o
5. is set to Standard and Sound Mode is set to Movie Panel Lock Off On Lock or unlock all the keys TV Controller on the TV e Boot Logo Off On Display Samsung logo when the TV is turned on E DivX Video On Demand MENU l System DivX Video On Demand ENTERL Shows the registration code authorized for the TV If you connect to the Divx web site and register with 10 digit registration code you can download the VOD activation file Once you play it using Videos the registration is completed For more information on DivX VOD visit http vod divx com LI Support Menu e Manual MENU O Support e Manual ENTERC4 You can read the introduction and instructions about the TV features stored in your TV For the detailed information about e Manual Screen refer to How to use the e Manual in User Manual E Self Diagnosis MENU I Support Self Diagnosis ENTERL 4 Self Diagnosis might take few seconds this is part of the normal operation of the TV e Picture Test Yes No Use to check for picture problems e Sound Test Yes No Use the built in melody sound to check for sound problems Ifyou hear no sound from the TV s speakers before performing the sound test make sure Speaker Select is set to TV Speaker in the Sound menu gt o The melody will be heard during the test even if Speaker Select is set to External Speaker or the sound is muted by pressing the MUTE butto
6. the volume level on each channel set to Normal Night This mode provides an improved sound experience compared to Normal mode making almost no noise It is useful at night E Reset Sound Yes No MENU l Sound Reset Sound ENTERC Reset all sound settings to the factory defaults Me Executing initial setup E Setup MENU I System Setup ENTER L Configure the channels and the time when setting up the TV for the first time or when resetting the unit For the detailed information about setting Setup refer to Initial Setup in User Manual LI Setting the Time E Time MENU I System Time ENTER C The current time will appear every time you press the INFO button Clock Set the Date and Time You can set the Date and Time directly by pressing the number buttons on the remote control Clock Mode Set up the current time manually or automatically Auto Set the current time automatically using the time from a digital channel The antenna must be connected in order to set the time automatically Manual Set the current time manually Depending on the broadcast station and signal the auto time set up may not be correct In this case set the time manually Clock Set Set the Date and Time manually Available only when Clock Mode is set to Manual You can set the Date and Time directly by pressing the number buttonson the remote control L Using the Sleep Timer MENU l System
7. to 45 minutes ago and it upgrade firmware downloaded whilst your watching TV turned on again m There are recurrent e Check and change the signal source picture sound issues A reaction may occur e To prevent this use felt pads on any surface of the TV that comes in direct between the rubber contact with furniture cushion pads on the base stand and the top finish of some furniture The message This file e This may appear because of high bit rate of content Content generally will may not be playable play but could experience some playability issue properly appears English Q Licence TheaterSound HD SRS and symbol are trademarks of SRS Labs Inc YO TheaterSound HD technology is incorporated under licence from SRS Labs TheaterSound HD Inc SRS TheaterSound provides the most immersive surround sound experience from the TVs built in speakers while maintaining steady volume and delivering rich bass and clear dialog XI DOLBY Manufactured under licence from Dolby Laboratories Dolby and the DIGITAL PLUS pulse double D symbol are trademarks of Dolby Laboratories PULSE Manufactured under license under U S Patent Nos 5 956 674 5 974 380 6 487 535 amp other U S and worldwide patents issued amp pending DTS the dts Symbol amp DTS and the Symbol together are registered trademarks amp DTS 2 0 Digital Out 5 9 Digital Out is a trademark of DTS Inc Pro
8. 0 MUTE gt 8 gt 2 4 POWER on 2 Picture In Picture PIP m PIP MENU I System gt PIP ENTERC You can watch the TV tuner and one external video source simultaneously PIP Picture in Picture does not function in the same mode NOTE For PIP sound refer to the Sound Select instructions f you turn the TV off while watching in PIP mode the PIP window will disappear P You may notice that the picture in the PIP window becomes slightly unnatural when you use the main screen to view a game or karaoke PIP settings Component HDMI DVI PC PIP Off On Activate or deactivate the PIP function Air Cable Select the antenna source to memorise Channel Select the channel for the sub screen Size Liml _al Select a size for the sub picture Position L_ L5 E k_l Select a position for the sub picture Sound Select Main Sub You can choose the desired sound Main Sub in PIP mode English OQ Economical Solutions M Eco Solution MENU l System Eco Solution ENTERC e Energy Saving Off Low Medium High Picture Off This adjusts the brightness of the TV in order to reduce power consumption If you select Picture Off the screen is turned off but the sound remains on Press any button except volume and power button to turn on the screen e No Signal Power Off Off 15 min 30 min 60 min To avoid unnecessary energy consumption
9. Cable Set top box video output resolution to 1080i or 720p Make sure you are watching the TV at the minimum recommended distance based on the size and definition of the signal The picture is distorted macroblock error small block dots pixelization Colour is wrong or missing There is poor colour or brightness There is a dotted lineon e the edge of the screen r The picture is black and e white Compression of video contents may cause picture distortion especially in fast moving pictures such as sports and action movies Low signal level or bad quality can cause picture distortion This is not a TV issue Mobile phones used close to the TV cca up to 1m may cause noise in picture on analogue and digital TV If you re using a component connection make sure the component cables are connected to the correct jacks Incorrect or loose connections may cause colour problems or a blank screen Adjust the Picture options in the TV menu go to Picture Mode Colour Brightness Sharpness Adjust Energy Saving option in the TV menu go to MENU System Eco Solution Energy Saving Try resetting the picture to view the default picture settings go to MENU Picture Reset Picture If the picture size is set to Screen Fit change it to 16 9 Change cable satellite box resolution If you are using an AV composite input connect the video cable yellow to the Green jack of component input 1 on the TV
10. L Retuning Channels Aerial Air Cable MENU l Channel Aerial ENTERC Before your television can begin memorising the available channels you must specify the type of signal source that is connected to the TV i e an Air Cable system Auto Tuning depending on the country MENU l Channel Auto Tuning ENTERC Scans for a channel automatically and stores in the TV Automatically allocated programme numbers may not correspond to actual or desired programme numbers If a channel is locked the PIN input window appears E Manual Tuning MENU l Channel Manual Tuning ENTERC4 Scans for a channel manually and stores in the TV If a channel is locked the PIN input window appears e Digital Channel Tuning Scans for a digital channel manually and stores in the TV Press the New button to search the digital channels When scanning has finished a channel is updated in the channel list e Analogue Channel Tuning Scans for an analogue channel Press the New button to search the channels by adjusting the Programme Colour System gt Sound System Channel Search E Clear Scrambled Channel depending on the region MENU I Channel Clear Scrambled Channel ENTERC Remove scrambled channels from your Auto Tune channel list The scrambled channels which have been deleted will display grey in the channel list If you want to watch the programme please contact local operator Guide Ty
11. LI Using the INFO Button Now amp Next Guide The display identifies the current channel and the status of certain audio video settings The now amp next guide shows daily TV programme information for each channel according to the broadcasting time Scroll lt gt to view information for a desired programme while watching the current channel Scroll A V to view information for other channels If you want to move to the currently selected channel press the LC button It may differ depending on the model The icons on the remote controller may differ depending on the region gt 2 Using Channel menu MENU 10 Support Contents Home ENTERL Press the MEDIA P CONTENT button to select the desired menu Each screen will oe displayed E Channel List You can view channel information All TV Data and others Analogue and Favourites 1 5 When you press the CH LIST button on the remote control Channel List screen will be displayed at once Contents Home amp 5 i E Za Guide Media Play Schedule Manager Source C 5 Return The displayed image may differ depending on the model All Shows all currently available channels TV Shows all currently available TV channels Data and others Show all currently available broadcast and other signal Analogue Shows all currently available analogue channels Favourites 1 5 Shows all favourite channels Favourites 1 5
12. Sound Mode ENTERL e Standard Selects the normal sound mode Music Emphasizes music over voices Movie Provides the best sound for movies Clear Voice Emphasizes voices over other sounds Amplify Increase the intensity of high frequency sound to allow a better listening experience for the hearing impaired If Speaker Select is set to External Speaker Sound Mode is disabled A Adjusting Sound Settings E Sound Effect standard sound mode only MENU 10 Sound Sound Effect ENTER Q e SRS TruSurround HD Off On This function provides a virtual 5 1 channel surround sound experience through a pair of speakers using HRTF Head Related Transfer Function technology e SRS TruDialog Off On This function allows you to increase the intensity of a voice over background music or sound effects so that dialogue can be heard more clearly Equaliser Use Equaliser to customize sound setting for each speaker Balance Adjusts the balance between the right and left speaker 100Hz 300HZz 1kHz 3kHz 10kHz Bandwidth Adjustment Adjusts the level of specific bandwidth frequencies Reset Resets the equaliser to its default settings lt If Speaker Select is set to External Speaker Sound Effect is disabled gt E Broadcast Audio Options digital channels only MENU 10 Sound Broadcast Audio Options ENTERL e Audio Language Change the default value for audio languages The available language
13. able Digital Audio output SPDIF format may differ depending on the input source Audio Delay Correct audio video sync problems when watching TV or video and when listening to digital audio output using an external device such as an AV receiver Oms 250ms e Dolby Digital Comp Line RF This function minimizes signal disparity between a dolby digital signal and a voice signal i e MPEG Audio HE AAC ATV Sound Select Line to obtain dynamic sound and RF to reduce the difference between loud and soft sounds at night time Line Set the output level for signals greater or less than 31dB reference to either 20dB or 31dB RF Set the output level for signals greater or less than 20dB reference to either 10dB or 20dB E Speaker Settings MENU l Sound Speaker Settings ENTERC e Speaker Select External Speaker TV Speaker A sound echo may occur due to a difference in decoding speed between the main speaker and the audio receiver In this case set the TV to External Speaker K When Speaker Select is set to External Speaker the volume and MUTE buttons will not operate and the sound settings will be limited When Speaker Select is set to External Speaker e TV Speaker Off External Speaker On When Speaker Select is set to TV Speaker GS GS e TV Speaker On External Speaker On If there is no video signal both speakers will be mute GS e Auto Volume Off Normal Night To equalize
14. andard Warm1 Warm2 Warm1 or Warm2 will be deactivated when the picture mode is Dynamic Settings can be adjusted and stored for each external device connected to an input on the TV e Digital Noise Filter Off Low Medium High Auto Auto Visualisation If the broadcast signal received by your TV is weak you can activate the gt Digital Noise Filter feature to reduce any static and ghosting that may appear on the screen When the signal is weak try other options until the best picture is displayed e Auto Visualisation When changing analogue channels displays signal strength Only available for analogue channels When bar is green you are receiving the best possible signal e MPEG Noise Filter Off Low Medium High Auto Reduces MPEG noise to provide improved picture quality e HDMI Black Level Low Normal Selects the black level on the screen to adjust the screen depth Available only in HDMI mode RGB signals e Film Mode Off Auto1 Auto2 Sets the TV to automatically sense and process film signals from all sources and adjust the picture for optimum quality Available in TV mode AV COMPONENT 480i 1080i and HDMI 1080 Z Ifthe picture shows abnormal please choose Off in Film Mode E Reset Picture Yes No MENU M Picture Reset Picture ENTERC Resets your current picture mode to its default settings L Changing the Preset Sound Mode E Sound Mode MENU II Sound
15. duct includes software DTS Inc All Rights Reserved DI VX DivX Certified to play DivX video up to HD 1080p including premium content ABOUT DIVX VIDEO DivX is a digital video format created by DivX LLC a subsidiary of Rovi Corporation This is an official DivX Certified device that plays DivX video Visit divx com for more information and software tools to convert your files into DivX videos ABOUT DIVX VIDEO ON DEMAND This DivX Certified device must be registered in order to play purchased DivX Video on Demand VOD movies To obtain your registration code locate the DivX VOD section in your device setup menu Go to vod divx com for more information on how to complete your registration Covered by one or more of the following U S patents 7 295 673 7 460 668 7 515 710 7 519 274 DivX DivX Certified and associated logos are trademarks of Rovi Corporation or its subsidiaries and are used under license Open Source Licence Notice In the case of using open source software Open Source Licences are available on the product menu Open Source Licence Notice is written only English
16. formation is unavailable Coaxial connection in the Self Diagnosis Test menu There are difficulties e Make sure the TV is placed on a flat surface If you can not remove the assembling the stand screws from the TV please use a magnetized screw driver base The Channel menu is e The Channel menu is only available when the TV source is selected grey out unavailable Your settings are lost after e If the TV is in the Store Demo mode it will reset audio and picture settings 30 minutes or every time every 30 minutes Change the settings from Store Demo mode to Home the TV is turned off Use mode in the Setup Initial setup procedure Press the SOURCE button to select TV mode and go to MENU System gt Setup Initial setup ENTERC 4 You have intermittent loss e Check the cable connections and reconnect them of audio or video e Loss of audio or video can be caused by using overly rigid or thick cables Make sure the cables are flexible enough for long term use If mounting the TV to the wall we recommend using cables with 90 degree connectors You see small particles e This is part of the product s design and is not a defect when you look closely at the edge of the frame of the TV The PIP menu is not e PIP functionality is only available when you are using a HDMI PC or available components source You turned the TV off e tis normal The TV operates the OTA Over The Aerial function itself
17. g on the manufacturer Refer to the manual provided with the Kensington Lock for additional information on proper use Please find a fR icon on the rear of the TV A kensington slot is beside the fR CON The position and colour may differ depending on the model To lock the product follow these steps 1 Wrap the Kensington lock cable around a large stationary object such as desk MR E 1 1 s p 4 N r or chair Optional N Be S Slide the end of the cable with the lock attached through the looped end of the Kensington lock cable Insert the locking device into the Kensington slot on the product Lock the lock These are general instructions For exact instructions see the User manual supplied with the locking device The locking device has to be purchased separately L Troubleshooting If you have any questions about the TV first refer to this list If none of these troubleshooting tips apply please visit www samsung com then click on Support The TV image does not If you have an analogue cable set top box upgrade to a digital set top look as good as it did in box Use HDMI or Component cables to deliver HD high definition picture the store quality Cable Satellite subscribers Try HD stations from the channel line up Antenna connection Try HD stations after performing Auto tuning Many HD channels are up scaled from SD Standard Definition contents Adjust the
18. itioned correctly The picture is distorted macro block error small block dots pixelization The picture will not display in full screen The remote control does not work The cable set top box remote control doesn t turn the TV on or off or adjust the volume Compression of video contents may cause picture distortion especially on fast moving pictures such as sports and action movies A low signal can cause picture distortion This is not a TV issue HD channels will have black bars on either side of the screen when displaying up scaled SD 4 3 contents Black bars on the top and bottom will appear during movies that have aspect ratios different from your TV Adjust the picture size options on your external device or TV to full screen Replace the remote control batteries with the poles in the right direction Clean the sensor s transmission window on the remote Try pointing the remote directly at the TV from 5 6 feet away Programme the Cable Set top box remote control to operate the TV Refer to the Cable Set user manual for the SAMSUNG TV code A Mode Not e Check the supported resolution of the TV and adjust the external device s Supported message output resolution accordingly appears There is a plastic smell e This smell is normal and will dissipate over time from the TV The TV Signal e This function is only available with digital channels from an Antenna RF In
19. light Contrast Brightness Sharpness Colour Tint G R Your television has several setting options for picture quality control NOTE When connecting a PC you can only make changes to Samsung MagicAngle Backlight Contrast Brightness and Sharpness Settings can be adjusted and stored for each external device connected to the TV Lowering picture brightness reduces power consumption M Screen Adjustment MENU l Picture Screen Adjustment ENTERL Set the various picture options such as picture size and aspect ratio e Picture Size Your cable box satellite receiver may have its own set of screen sizes as well However we highly recommend you use 16 9 mode most of the time Auto Wide Autoatically adjusts the picture size to the 16 9 aspect ratio 16 9 Sets the picture to 16 9 wide mode Wide Zoom Magnifies the picture size more than 4 3 Adjusts the Position by using A Y buttons Zoom Magnifies the 16 9 wide pictures vertically to fit the screen size Adjusts the Zoom or Position by using A V button 4 3 Sets the picture to basic 4 3 mode Do not watch in 4 3 format for a long time Traces of borders displayed on the left right and centre of the screen may cause image retention screen burn which are not covered by the warranty e Screen Fit Displays the full image without any cut off when HDMI 720p 1080 1080p or Component 1080 1080p signals are inputted e Positio
20. may differ depending on the broadcast e Audio Format When sound is emitted from both the main speaker and the audio receiver a sound echo may occur due to the decoding speed difference between the main speaker and the audio recevier ln this case use the TV Speaker funcion Audio Format option may differ depending on the broadcast 5 1ch Dolby Digital sound is only available when connecting an external speaker through optical cable e Audio Description not available in all locations This function handles the Audio Stream for the AD Audio Description which is sent along with the Main audio from the broadcaster Audio Description Off On Turn the audio description function on or off Volume Adjust the audio description volume E Additional Settings MENU I Sound Additional Settings ENTERC e DTV Audio Level MPEG HE AAC This function allows you to reduce the disparity of a voice signal which is one of the signals received during a digital TV broadcast to a desired level According to the type of broadcast signal MPEG HE AAC can be adjusted between 10dB and OdB To increase or decrease the volume adjust between the range O and 10 respectively e SPDIF Output SPDIF Sony Philips Digital InterFace is used to provide digital sound reducing interference going to speakers and various digital devices such as a DVD player Audio Format You can select the Digital Audio output SPDIF format The avail
21. n Signal Information digital channels only An HD channel s reception quality is either perfect or the channels are unavailable Adjust your antenna to increase signal strength e Reset Reset all settings to the factory defaults The PIN input screen appears before the setup screen Enter your 4 digit PIN Change the PIN using the Change PIN option Troubleshooting If the TV seems to have a problem refer to this description W If none of these troubleshooting tips apply contact the Samsung customer service centre E Software Upgrade MENU l Support Software Upgrade ENTERL 4 Software Upgrade can be performed by downloading the latest firmware from www samsung com to a USB memory device Current Version the software already installed in the TV Installing the Latest Version depending on the region e By USB Insert a USB drive containing the firmware upgrade file downloaded from www samsung com into the TV Please be careful not to disconnect the power or remove the USB drive until upgrades are complete The TV will p gt be turned off and on automatically after completing the firmware upgrade When software is upgraded video and audio settings you have made will return to their default settings We advise you to write down your settings so that you can easily reset them after the upgrade e By Channel Upgrade the software using the broadcasting signal e Alternative Software Replace the curren
22. n Adjust the picture position It is only available in Wide Zoom e Zoom Position Adjust the picture position It is only available in Zoom NOTE e After selecting Screen Fit in HDMI 1080i 1080p or Component 1080i 1080p mode you may need to centre the picture 1 Press the A or V button to select Position 2 Press the ENTERC4 button 3 Pressthe A V lt or gt button to move the picture Depending on the input source the picture size options may vary lf you want to reset the position you adjusted select Reset in the Position screen The picture will be set to its default position The available items may differ depending on the selected mode When connecting a PC only 16 9 and 4 3 modes can be adjusted Settings can be adjusted and stored for each external device connected to an input on the TV If you use the Screen Fit function with HDMI 720p input 1 line will be cut at the top bottom left and right as in the overscan function e PC Screen Adjustment KM Available only PC mode Coarse Fine Removes or reduces picture noise If the noise is not removed by Fine tuning alone then adjust the frequency as best as possible Coarse and Finetune again After the noise has been reduced readjust the picture so that it is aligned to the centre of screen Position Adjusts the PC screen position with direction button a w q p Image Reset Resets the image to default settings ANU icomAXe Ul itaat
23. n the top with its playing time If video time information is unknown play time and progress bar are not displayed During video playback you can search using lt and gt button You can use lt REW and gt gt FF buttons during playback In this mode you can enjoy movie clips contained on a Game but you cannot play the Game itself Supported Subtitle Formats External nternal SubStation Alpha Text Format Advanced SubStation Alpha Text Format SubRip M Text Format MPEG 4 Timed text Text Format e Supported Video Formats DivX 3 11 4 x 5 x 6 1 MPEG4 SP ASP 1920 x 1080 H 264 BP MP HP Nee LPCM H 263 ADMPCM IMA MS AAC Motion JPEG 640 x 480 HE AAC WMA Window Media Video v9 DD MPEG MP3 MPEG2 DIRAO Real Audio 6 1920 x 1080 MPEG1 RV8 9 10 RV30 40 Other Restrictions e Video content will not play or not play correctly if there is an error in the content or the container e Sound or video may not work if the contents have a standard bit rate frame rate above the compatible Frame sec listed in the table above If the Index Table is in error the Seek Jump function is not supported Some USB digital camera devices may not be compatible with the player The menu can be displayed late if the video is over 10Mbps bit rate Supports up to H 264 Level 4 1 e WMA supports up to 10 Pro 5 1 channel and M2 H 264 FMO ASO RS VC1 SP MP AP L4
24. nly supports USB Mass Storage Class MSC devices MSC is a Mass Storage Class Bulk Only Transport device Examples of MSC are Thumb drives Flash Card Readers USB HUB are not supported Devices should be connected directly to the TV s USB port Before connecting your device to the TV please back up your files to prevent them from damage or loss of data SAMSUNG is not responsible for any data file damage or data loss USB HDD is not supported Do not disconnect the USB device while it is loading The higher the resolution of the image the longer it takes to display on the screen The maximum supported JPEG resolution is 15360 x 8640 pixels For unsupported or corrupted files the Not Supported File Format message is displayed If the TV has been no input during time set in Auto Protection Time the Screensaver will run gt The power saving mode of some external hard disk drives may be released automatically when connected to the TV e f a USB extension cable is used the USB device may not be recognized or the files on the device may not be read e f a USB device connected to the TV is not recognized the list of files on the device is corrupted or a file in the list is not played connect the USB device to the PC format the device and check the connection e Ifa file deleted from the PC is still found when Media Play is run use the Empty the Recycle Bin function on the PC to permanently delete the file
25. o On The PIN input screen appears Enter your 4 digit PIN Change the PIN using the Change PIN option Delete You can delete a channel to display the channels you want Information Displays details of the selected programme Deselect Deselect the selected channels Select All Select all the channels in the channel list E Schedule Manager You can set a desired channel to be displayed automatically at the intended time In addition you can view modify or delete a channel you have reserved to watch Set the current time first to use this function Using Option Menu Set each channel using the menu options 1 Press the TOOLS button to select the Schedule manually You can press the A Schedule manually directly on the Schedule Manager screen b gt 2 Press the lt P A V or number buttons to set the Channel Repeat Date Start Time e Antena Select the disired broadcasting signal Channel Select the desired channel Repeat Select Once Manual Sat Sun Mon Fri or Everyday to set at your convenience If you select Manual you can set the day you want The VW mark indicates the day you ve selected e Date You can set the desired date It is available when you select Once in Repeat Start Time You can set the start time you want If you want to edit or cancel the schedule select the reserved schedule on the Reserved Programmes Press the TOOLS button then select the Edit Schedule or Cancel schedule
26. ot be selected Each USB you use is assigned its own folder When using more than one of the same type of USB make sure the folders assigned to each USB have different names Itis recommended that you use a USB memory stick and a multi card reader when using On Timer e The On Timer function may not work with USB devices with a built in battery MP3 players or PMPs made by some manufacturers because these devices take a long time to be recognized e Off Timer 1 Off Timer 2 Off Timer 3 Three different off timer settings can be made You must set the clock first Setup Select Off Once Everyday Mon Fri Mon Sat Sat Sun or Manual to set at your convenience If you select Manual you can set up the day you want to activate the timer The v mark indicates the day you ve selected Time Set the hour and minute d Locking Programme M Security MENU I System Security ENTERL The PIN input screen appears before the setup screen Enter your 4 digit PIN the default of which is 0 0 0 0 Change the PIN using the Change PIN option e Channel Lock Off On Lock channels in Channel menu to prevent unauthorized users such as children from watching unsuitable programme Available only when the Source is set to TV e Change PIN Change your password required to set up the TV X Ifyou forget the PIN code press the remote control buttons in the following sequence in standby mode which resets the PIN to 0 0 0
27. pe depending on the region MENU l Channel Guide Type ENTERL Select to use either the built in or downloaded guide Guide Set the built in guide to be displayed when the GUIDE button on the remote control is pressed e Auto Set the TV to select the proper guide automatically when the GUIDE button on the remote control is pressed Fine Tune Analogue channels only MENU l Channel Fine Tune ENTER If the signal is weak or distorted fine tune the channel manually Fine tuned channels are marked with an asterisk To reset the fine tuning select Reset E LNA Off On MENU l Channel LNA If the TV is operating in a weak signal area the LNA function can improve the reception a low noise preamplifier boosts the incoming signal LI Changing the Preset Picture Mode MENU 00 Picture Picture Mode ENTER L Picture Mode Select your preferred picture type When connecting a PC you can only make changes to the Entertain and Standard e Dynamic Suitable for a bright room e Standard Suitable for a normal environment Movie Suitable for watching movies in a dark room e Entertain Suitable for watching movies and games It is only available when connecting a PC E Samsung MagicAngle e Samsung MagicAngle Off Lean back mode Standing Mode Select angle that best suits your viewing position e Mode Ajust screen viewing angel English E Back
28. profile LBR mode of MO is not supported and AVCHD are not supported GMC is not supported e WMA lossless audio is not supported English Photos Viewing a Photo or Slide Show 1 Press the lt P A V button to select the desired photo in the file list 2 Press the ENTER CC button During the slide show all files in the file list will be displayed in order Z When you press the Play button in the file list slide show will be started immediately Z During the slide show you can adjust the slide show speed using lt lt REW or gt gt FF button Z You can move to other file using lt or gt button Music files can be automatically played during the slide show if the Background Music On is set e Supported Photo Formats 15360 x 8640 WE Music Playing Music 1 Press the lt A button to select the desired Music in the file list 2 Press the ENTERLC button or Play button You can use lt lt REW and gt gt FF buttons during playback Only displays the files with supported music file extension Other file extensions are not displayed even if they are saved on the same USB device If the sound is abnormal when playing music files adjust the Equaliser in the lt a gt Sound menu An over modulated music file may cause a sound problem Using the playback menu Press the lt gt button to select the desired menu e Play Pause You can sta
29. rt or stop a music Alternatively push the gt or button on the remote e Repeat Mode Off One Song All You can play music files repeatedly e Shuffle Mode Off On You can play the music randomly Sound Mode Standard Music Movie Clear Voice Amplify e Supported Music Formats Oo mB MPEG MPEG1 Audio Layr3 n Sa e WMA supports up to 10 Pro 5 1 channel and M2 profile LBR mode of MO is not S10107010 41610 English L Media Play Additional Functions Playing the selected Videos Music Photos files 1 2 Press the TOOLS button at each main screen and select Play selection Select the desired files The check box appears to the left of the selected files Press the button to select Play You can select or deselect all files pressing the Select All Deselect All Videos Music Photos Play Option menu Press the TOOLS button and select play selections Title Search You can move the other file directly Pov E Time Search You can search the video using lt and v gt button at one minute interval or entering the number directly It may not be supported depending on the input source Shuffle Mode You can play the music randomly tr gt Repeat Mode Mode You can You can play movie fles repeatedly movie files repeatedly Picture a Seas can adjust the picture size to your preference Picture Mode You can adjust the picture setting Sea Sound Mode You can adjus
30. set how long you want the TV to remain on if its not 4 receiving a signal Disabled when the PC is in power saving mode e Auto Power Off Off On The TV will be automatically turned off when no user operation is received for 4 hours Q Other Features E Language MENU Il System Language ENTERL e Menu Language Set the menu language Preferred Language Primary audio Secondary audio Primary subtitle Secondary subtitle Select a language which will be the default language when a channel is selected Subtitle MENU l System Subtitle ENTERL4 Use this menu to set the Subtitle mode e Subtitle Off On Switches subtitles on or off Subtitle Mode Normal Hearing Impaired Sets the subtitle mode Subtitle Language Sets the subtitle language Z Ifthe programme you are watching does not support the Hearing Impaired function Normal automatically activates even if the Hearing Impaired mode is selected English is the default in cases where the selected language is unavailable in the broadcast Digital Text Disable Enable depending on the region MENU I System Digital Text ENTERL If the programme broadcasts with digital text this feature is enabled MHEG Multimedia and Hypermedia Information Coding Experts Group An International standard for data encoding systems used in multimedia and hypermedia This is at a higher level than the MPEG system which incl
31. siaig TOOLS x1 Frequency values position and fine tune are adjusted automatically It s only available in PC mode L Changing the Picture Options E Advanced Settings MENU ID Picture Advanced Settings ENTER C available in Standard Movie mode You can adjust the detailed setting for the screen including colour and contrast e Dynamic Contrast Off Low Medium High Adjust the screen contrast e Black Tone Off Dark Darker Darkest Select the black level to adjust the screen depth Flesh Tone Adjust the flesh tone colour Dynamic Contrast Medium RGB Only Mode Off Red Green Blue Displays the Red Green and Blue colour for making fine adjustments to the hue and saturation Colour Space Auto Native Adjust the range of colours available to create the image White Balance Adjust the colour temperature for a more natural picture R Offset G Offset B Offset Adjust each colour s red green blue darkness R Gain G Gain B Gain Adjust each colour s red green blue brightness Reset Resets the White Balance to its default settings D Gamma Adjust the primary colour intensity Motion Lighting Off On Reduce power consumption by brightness control adapted motion Only Standard mode can used E Picture Options MENU 0 Picture Picture Options ENTER C When connecting a PC you can only make changes to the Colour Tone e Colour Tone Cool St
32. t software with the alternative e Standby Mode Upgrade A manual upgrade will be automatically performed at selected time E Contact Samsung MENU 10 Support Contact Samsung ENTERL 4 View this information when your TV does not work properly or when you want to upgrade the software You can find information regarding our call centres and how to download products and software E Contents Home MENU Il Support Contents Home ENTERL4 You can enjoy useful and various contents L Using the Media Play Enjoy photos music and movie files saved on a USB Mass Storage Class MSC device 1 Press the MEDIA P CONTENT button to select Media Play 2 Press A V button to select desired menu Videos Photos Music then press the ENTER LC button 3 Press A V button to select desired device then press the ENTER L button again LI Connecting a USB Device Turn on your TV N Connect a USB device containing photo music and movie files to the USB port on the side of the TV o When USB is connected to the TV popup window appears You can select the Videos Photos or Music directly It might not work properly with unlicenced multimedia files fs fs Need to Know List before using Media Play MTP Media Transfer Protocol is not supported The file system supports FAT16 FAT32 and NTFS Certain types of USB Digital camera and audio devices may not be compatible with this TV Media Play o
33. t the sound setting Audio Language You can change the audio language if the video has more than one language Subtitle You can set subtitles on off Subtitle Settings You can play the video with subtitles sf This function only works if the subtitles are the same file name as the video Start Slide Show You can start or stop a slide show J Stop Slide Show Slide Show Speed You can select the slide show speed v during the slide show Background Music You can set on off background music lt On Background when watching a slide show Music Off Background Music You can select background music when 7 Setting watching a slide show Zoom You can zoom into images in full screen v mode Rotate You can rotate images in full screen mode Play selection selection Select and Select and play multiple fles multiple files OEGE Ee dia can see detailed information about the played file Er L NOTE e Contents may not be played on your TV depending on their resolution and format e The ENTERL and lt gt buttons may not work depending on the type of Media e Using the mobile device you can control the media playing For details refer to each mobile s user s guide lt L Anti theft Kensington Lock The Kensington Lock is not supplied by Samsung It is a device used to physically fix the system when using it in a public place The appearance and locking method may differ from the illustration dependin
34. udes data linking hypermedia such as still images character service animation graphic and video files as well as multimedia data MHEG is user runtime interaction technology and is being applied to various fields including VOD Video On Demand ITV Interactive TV EC Electronic Commerce teleeducation tele conferencing digital libraries and network games E Auto Protection Time Off 2hours 4hours 8hours 10hours MENU I System Auto Protection Time ENTERL If the screen remains idle with a still image for a certain period of time defined by the user the screen saver is activated to prevent the formation of ghost images on the screen E General MENU l System General ENTERL e Max Power Saving Off On Turn off PC monitor when PC is not used for certain length of time to reduce power consumption e Game Mode Off On When connecting to a game console such as PlayStation or Xbox you can enjoy a more realistic gaming experience by selecting game mode NOTE Precautions and limitations for game mode To disconnect the game console and connect another external device set Game Mode to Off in the setup menu f you display the TV menu in Game Mode the screen shakes slightly e Game Mode is not available in TV mode e After connecting the game console set Game Mode to On Unfortunately you may notice reduced picture quality e f Game Mode is On Picture Mode
35. will be disolayed when you set Edit Favourites Y Ifyou want to view favourite channels you added press the CH LIST button and use 4 gt Ch Mode button to move Favourites 1 5 Using the control buttons with the Channel List e Tools Displays the option menu 4b Ch Mode Move to the All TV Data and others Analogue and Favourites 1 5 Watch Watches the channel you selected Page Move to next or previous page Using Option Menu Set each channel using the Channel List menu options Edit Favourites Lock Unlock Edit Channel Name Edit Channel Number Delete Information Edit Mode Option menu items may differ depending on the channel status 1 Select a channel and press the TOOLS button 2 Select a function and change its settings e Programme View digital channels only Displays the programme e Edit Favourites Set channels you watch frequently as favourites Add or delete the selected channel in Favourites 1 5 1 2 Select the Edit Favourites then press the ENTER L button Press the ENTERL button to select Favourites 1 5 then press the OK button One favourite channel can be added in several of favourites among Favourites 1 5 Lock Unlock Lock a channel so that the channel cannot be selected and viewed This function is available only when the Channel Lock is set to On The PIN input screen appears Enter your 4 digit PIN Change the PIN using the Change PIN option
36. y plugged in to the wall outlet and the TV Make sure the wall outlet is working Try pressing the POWER button on the TV to make sure the problem is not the remote If the TV turns on refer to The remote control does not work below Ensure the Sleep Timer is set to Off in the Time menu If your PC is connected to the TV check your PC power settings Make sure the AC power cord is plugged in securely to the wall outlet and the TV When watching TV from an antenna or cable connection the TV will turn off after15 30 60 minutes if there is no signal There is no picture video The TV is not receiving all channels Check cable connections remove and reconnect all cables connected to the TV and external devices Set your external device s Cable Set top Box DVD Blu ray etc video outputs to match the connections to the TV input For example if an external device s output is HDMI it should be connected to an HDMI input on the TV Make sure your connected devices are powered on Be sure to select the TV s correct source by pressing the SOURCE button on the remote control Reboot the connected device by reconnecting the device s power cable Make sure the Antenna cable is connected securely Please try Setup Initial setup to add available channels to the channel list Go to MENU System Setup Initial setup and wait for all available channels to be stored Verify the Antenna is pos

Download Pdf Manuals

image

Related Search

Related Contents

  Info produit N-11  2080-IN009 - Literature Library  Commercial Electric CESL403-CL Instructions / Assembly  Installation Report - Fischer Panda Generators Inc.    OmniMount Torino 36  

Copyright © All rights reserved.
DMCA: DMCA_mwitty#outlook.com.