Home

Samsung NP-M50 User Manual

1. lt Fn gt Key E F1 Delete d a lp Ty 1 Home CO NAM Tab PgUp 7 Caps Lock IH PgDn Shift End Vy f au tt Fn Ctrl 4 a N J i Fn lt Fn gt Key NL N Cean v d A Numeric Keypad Screen Brightness and Volume Adjustment Direction Keys 2 Special Function Keys The lt Fn gt key activates special functions when F Key Com Key gt binations Name pressed in combination with other keys Function REST Gauge Euro CRT LCD Backlit Mute SRS Wireless LAN Touchpad Etiquette Mode Puts the computer into suspended mode To use the computer again press the power button Shows the current power source and the remaining battery charge Used to type the symbol for Euro currency Switches the display between the LCD and an external display evice when an external display device is connected P 6 8 Turns the LCD on and off Turns the audio output on and off This feature enables you to experience more stereophonic sound You can select one of the following modes by pressing the button INloFe WOW XT ON Mode Select to listen to music TruSurroung XT ON Mode Select to watch a movie SRS OFF Mode Switches off the SRS function The SRS function is only supported through the built in speaker of the computer and the
2. My computer Internet Service Provider The Internet Provider Connecting to the Internet Using a Modem 1 Connect the telephone line to the modem port Do not use a digital telephone line 2 To connect the modem to the Internet and use e mail you have to apply to an Internet Service Provider ISP for an Internet service N OS For more account information please contact your ISP Ask your ISP about Internet fees and the disconnection procedure If the Internet connection is not disconnected properly additional telephone charges may incur Chapter 4 Connecting to the Internet 4 3 Configuring the Network Environment Settings for Wired LAN Connections A wired LAN environment is an environment where you can connect to the Internet using the company s LAN or with a broadband modem 1 Connect the network LAN cable to the LAN port of the system 2 Click Start gt Control Panel Select Network and Internet Connections in the Control Panel window 4 Click Network Connections in the Network and Internet Connections window pa 5 In the Network Connections window point the mouse pointer to Local Area Network and click the right touchpad button Select Properties from the popup menu that appears gt eR SSA w 1304 Sea Ae Ls Land Wet Adapter 2 al FE S MANES WEU Ai BE ae iE ERRO OTHE Bea eu TETA 6 In t
3. System specifications software types and safety instructions are provided here A 2 Manual System Specifications The system specifications will be described below The system specifications may differ depending on the derived models Item Specification Comment CPU Intel Pentium M Dothan Processor FSB 533 MHz Optional Intel Centrino Intel Mobile Technology Pentium M Wireless LAN Cache memory 2MB Dothan Main memory 256 512 1024 MB DDR2 SODIMM 2 DDR2 socket Max 2GB Main Chipset Intel 915PM ICH6 M Hard Disk HDD 2 5 UltraDMA100 S M A R T 9 5mmH SATA Optional CD Drive CD RW DVD ROM Combo DVD Super Multi Optional Graphics Nvidia Geforce Go 6600 NV43M 64MB 128MB Optional Sound High Definition Audio Codec AD 1986A Network Interface Modem V 92 Wired LAN Broadcom BCM5788 1G Ethernet UTP Wireless LAN 802 11BG or 802 11ABG Optional Bluetooth 1 2 Optional Memory Card Slot Memory Stick Memory Stick Pro SD Card MMC and XD Card Supported PCMCIA Slot Type and II Compatible 1 slot Ports IEEE 1394 6 Pin USB 2 0 x 4 Microphone Headphone S PDIF Support Modem RJ 11 LAN RJ 45 Monitor TV Out S Video Dimensions mm 395 x 278 8 x 30 5 35 4 Width x Depth x Height LCD Panel Size 17 WXGA 1440 x 900 17 WSXGA 1680 x 1050 Optional Weight Battery Operation Environment Operation Voltage Frequency Output Power Output Voltage 2 99 Kg Lithium lon smart battery Temperature for c
4. SAMSUNG M50 k ages may differ from actual product appearance Manual This manual describes how to use computer as well as information on Windows Internet Upgrade and Troubleshooting The photographs used in this user manual may be somewhat different in shape and color to those of your computer depending on the model of your computer Contents 1 Getting Started Introducing the Computer ccccccccccccsccscsscsscsecsecseeseesecaceacsacsasesecseeseeae 1 2 Turning the Computer On and Off cccccccccccccssssesscscescsecssssessessessseeaseassees 1 5 MHA CACY coca se tips A E veces E uct aap ducetud oe tedandaeaaceteaneuetons 1 7 Using the Keyboard sc cncesssdsussnsanschrtaucinnlaucnenisediesiandninsrasniatennsanapessszenanbats 1 9 Siau Mdi CO 9 sron neni o n E T EEE i 1 11 Adjusting LCD Brightness cccccccccsscsscscescssessesecsecsecsssseesecseeseeseeateas 1 12 Adjusting the Volume sacs ses cttcncceasieeceste die asensstssiacauniden neta canedesatncde see 1 13 Using the Remote Control cccccccccccscsscsscsececseesecsecssescsecsesesecstesseas 1 14 Proper Seating Posture During Computer Use cccccccceessteeeeesteeeeeeees 1 15 2 Introducing Windows Windows XP BASICS ccsssssscccccececceestscsccccecccceeestssscecceceeestsstsusseceeeeeetntaes 2 2 Document OperationS ccccccccceesseecesenseceesseeecceneeeeceeseeeessaeeeeseneeeeseaaees 2 7 3 Using The Computer Using mh
5. Stepl Install the wireless LAN configuration program PRO Set Step2 Configure wireless network settings through the wireless LAN configuration program E Step 1 Installing the wireless LAN configuraton program PROSet You can install the Wireless LAN Client Manager program by using the System Software Media Insert the System Software Media into the CD ROM drive and then install the Wireless LAN program E Step 2 Using the wireless LAN configuration program PROSet Double click the wireless LAN program icon on the taskbar Or click Start gt All Programs gt Intel PROSet Wireless gt Intel PROSet Wireless Now l In some languages some buttons on the window may not be displayed If this is gt the case resize the window to use the program Configure wireless network settings in PRO Set following the procedures below gt To connect to an Access Point To connect to an access point or existing computer to computer Ad Hoc network refer to the following procedures To create a new computer to computer network refer to the following P 4 15 To create computer to computer Ad Hoc network section Chapter 4 Connecting to the Internet 4 13 1 In Available N etworks click on Refresh 2 Select the name of desired access point or computer to computer network to connect from the searched available networks list and click Configure Nowe If your desired network does not appear click Refresh
6. Specifying Power Save Time You can specify Turn Off Monitor Turn Off Hard Disk System Standby Mode and Maximum Power Save Mode Select Start gt Control Panel gt Performance and Maintenance gt Power Options gt Power Schemes tab Then specify time in each item and click OK Now The Power Setting is set to BatteryM gr N ormal Mode BatteryM gr N ormal Mode extends the battery use time when using battery power and optimizes the Intel Speedstep feature Since it automically optimizes the processing speed of the system to minimize power consumption you may experience slower operations when using battery power than when using AC power To use BatteryM gr N ormal mode in the W indows system please install the Battery Manager program by using the System Software Media ARNE e7 ewetees sere ER e HA Bani RIG Aaa ee ce e Sait ba E TAE PAA FAS o E EAMES ge Bo EERE 0 C BatteryMar it BRAS AE ETRE ta FER Sit pa mpa x Hard Disk Off mo A z mase v The Hard Disk goes into Power Saving mode after the specified period of time Monitor Off The LCD display goes into Power Saving mode after the specified period of time READ g ev sage m pis v 25 piik v Standby Mode If the computer is not used for the specified period of time the monitor and hard disk drives are turned off to reduce power consumption Hibernation Mode Saves the current working sta
7. 6 14 10 5885 The update list on the screen may differ depending on the computer model Note Updates that must be installed separately If you select an update that must be installed separately a message appears informing you of this Follow the instruction message to correctly install it Automatic update items display By default your computer is configured to automatically search for updates If there is a new update available this is notified in the notification area Click the balloon help icon in the notification area Here you will be able to find the latest available updates t Tis Bane pamang Update Plus To change the automatic update settings click the Custom button in Figure 2 and change the settings Samsung Update Plus does not provide updates for additionally installed software and device drivers Using AVStation premium INlofS AVStation premium is provided for some models AVStation premium is an integrated multimedia program that allows you to watch video pictures video and movies and listen to music You can start AVStation premium as follows Method 1 Select Start gt All Programs gt Samsung gt AVStation premium gt AVStation premium Method 2 Double click the AVStation premium Z2 icon on the Desktop or Taskbar Method 3 Click the AVStation button AVStation Button Method 4 Click the AVS button on the remote control P 1 14 INlofS The function butto
8. Chapter 7 Recovering the Computer 7 3 7 4 Manual Reinstalling Software If you have reinstalled the W indows operating system or the system and program do not operate properly you can re install the driver and program using the System Software M edia Noua This computer is optimized for Microsoft W indows XP therefore drivers for other operating systems are not included on the System software M edia Mi Running the system software media Insert the system software media into the CD ROM drive The initial screen appears automatically Samsung z tts ik Am fit pa ERR ARRERE AE eE Samsung BBS SoHE ARB lt ROR AAA PES oe tk A OT SES Hh ee PSA TS TUS RE ARETE SEPARA AR aS ET PERE REA R bRE MRR TR BRE Standard Installation This displays a list of drivers or programs that are not currently installed on your computer from the system software media provided All necessary components are installed using the factory defaults e Minimum Installation This displays the components driver W indows programs etc that if not installed may cause problems with the system performance You can install only required components e Custom Installation You can customize the installation of drivers and programs E Installing drivers and programs 1 Click Standard Installation in the main window of the System Software Media Standard Installation is recommended 2 The system is scanned to display t
9. A This may happen when running a game designed for DirectX 8 1 such as NHL 2003 MVP Baseball 2003 etc Q9 The game screen is displayed small A This may happen when the display settings are set to zoom out mode Use center output Change the settings as follows to fit the game screen to the LCD screen 1 Right click over the Desktop and select Properties from the pop up menu 2 In the Display Properties window select the Settings tab gt Advanced gt GeForce Go 6600 tab 3 Select the nView item set the nView mode to Single Display and set the Current Display to Laptop Display 4 Right click over the figure of the Digital Display Device and then click Adjust Screen 5 Select Use Display Adapter Scaling and then click the Apply button Q10 The game play screen frequently stops and starts A This may happen when the PowerM izer Settings are set to Maximum Power Saving Function or Balanced 1 Right click over the Desktop and select Properties from the pop up menu 2 In the Display Properties window select the Settings tab gt Advanced gt GeForce Go 6600 3 Select the PowerMizer item slide the AC outlet and the battery sliders to Maximum Performance and then click the Apply button Q11 The picture is not displayed properly for some games A Some games such as Harry Potter and the Sorcerer s Stone Harry Potter and the Chamber of Secrets etc may not display the pict
10. Battery Saving Mode Using this is recommended when the AC adapter is connected or in Normal or higher modes E Turning Off Unnecessary Devices Turning off Turning off unnecessary devices extends the battery use time Select the Start gt Control Panel gt Performance and Maintenance gt System gt Hardware tab and click Device Manager Right click a device you are not using and select Disable e g Wireless LAN IEEE 1394 etc WE Use Battery Calibration If you charge discharge the battery repeatedly for only a short time the battery use time may be reduced by the difference between the actual battery charge and the remaining charge display In this case the actual battery charge and the remaining charge display will be same by discharging the battery completely using the Battery Calibration function and then recharging it again 1 Turn off the computer and disconnect the AC power 2 Turn on the computer and press lt F2 gt to enter into System Setup 3 Select Smart Battery Calibration in the Boot M enu and press lt Enter gt to start The Battery Calibration function is activated and the battery is discharged forcibly This operation requires 3 5 hours depending on the battery capacity and the remaining battery charge PhoenixBIOS Setup Utility Main Advanced Security gt Boot Device Priority Item Specific Help NumLock Off Select system boot Enable Keypad By NumLock options Summary screen Disabled Boor
11. Microphone Jack USB 2 0 Port Line In Jack Left View iil NIT z NH H Fan Vents AU ARATANY ALIN USB 2 0 Port Network LAN Port P 4 4 CD Drive Optional P 3 2 Monitor Port IEEE 1394 Port 6Pin Modem Port P 4 3 PCMCIA Card Slot P 3 11 Chapter 1 Getting Started 1 3 Rear View USB 2 0 Port Security Lock Port P 5 10 DC In Port Battery P 5 4 TV Output Port S Video P 6 8 Bottom View Battery Latches Memory Compartment P 5 8 HDD Compartment GeuiioW Removing or disassembling the hard disk drive will void your warranty To replace the hard disk drive please contact your nearest Samsung Service Centre 1 4 Manual Turning the Computer On and Off Turning On 1 Insert the battery and connect the power according to the supplied Installation Guide 2 Lift up the LCD panel and open it to a comfortable angle 3 Press and then release the power button to turn the system on Power Button Turning Off 1 Click the Start button on the Taskbar 2 Select Turn Off Computer 3 Click Turn Off from the Turn Off Computer window tata eel Gawiion If the computer has not turned off properly due to a system error press and hold the power button for more than 4 seconds to turn the system off After doing SO when you turn the system on the system examination program is executed automatically Chapter 1 Getting
12. TRON ER fy WD He aeRO Chapter 4 Connecting to the Internet 4 9 4 10 Manual On the Wireless N etworks tab click Advanced 4 Clear Automatically connect to non default network check box if it is selected Select Computer to computer ad hoc networks only and click Close 5 In the Wireless N etworks tab click Add 6 Enter the network name e g samsung and unselect The key is provided for and me automatically Enter the encryption key in the N etwork key field click OK a iii FILE GTN Note Sar ce EDRR EATE ARA FARR Awe DL WEP Here ate aK Hee faba ce aa hes CREPE OD 1 fe Aiha EH To prevent a network connection from an unauthorized user it would be better to configure a network key encryption key A network key consists of 5 13 alohanumeric characters e g magic or of 10 26 hexadecimal numbers a hexadecimal number is represented by numbers 0 to 9 or letters a to f 7 Check that the configured network name e g samsung is in the Preferred networks item and click OK t SPARS AS we MARR sere GFA Windows kae Fie ae N By FA Ses N SE RTA ERTS SERBS WIE F eae RARR E EPHE HIG FARITA HHE amp amang Ean PRRILERANAEE TE amw Now your wireless network setup has been completed Chapter 4 Connecting to the Internet 4 11 4 12 Manual E Step 2 Connect
13. Wireless Network Setup Using the Wireless LAN Setup Program For more information ask your network administrator Mi RF Specifications R F Frequency Band 2 4GHz Support Channels Channels allowed per country Device Description Transceiver Power 5 mW Transmission Method 11b mode DSSS 11g mode OFDM Data Rate Mbps 11b mode 11 5 5 2 and 1 11g mode 54 48 36 24 18 12 9 and 6 Antenna Type Internal Antenna 2 EA main aux The data rate may differ from the actual data rate 11g mode is supported only when the device is connected with an IEEE802 11g device e g IEEE802 11g compatible Access Point Appendix A 3 A 4 Manual Intel R PRO Wireless LAN 2915ABG Network Connection ltem Specifications Physical Dimensions 59 75 X 44 45 mm Width X Height Specifications operation temperature Same as system operation specifications and humidity Temperature 0 70 C Humidity less than 85 Power Saving Mode 135mW Power Receiving Mode 0 85W Specification 1 45W Power 3 3V Compatibility IEEE 802 11a IEEE 802 11b IEEE 802 1 1g Operating System Microsoft Windows XP Network NDIS5 Miniport Driver Specifications Media Access Protocol CSMA CA Collision Avoidance with Acknowledgement ACK Security Wired Equivalent Privacy support WEP 64bit 1 28bit WPA CCX This piece of equipment supports the Wi Fi wireless LAN security standard WPA Wi Fi Protected
14. Click the Folder Icon in the Toolbar to view the entire structure Click again to return to the Quick Task Window Chapter 2 Introducing Windows 2 5 Help and Support Center Help and Support Center provides references and troubleshooting information regarding computer use Please refer to help and support centre before calling the Samsung helpline Click Start gt Help and Support Displays Help Index NWR S844 Vyamearw earo Team v mam Related help information appears when a search AREH keyword is entered Connect to Support Center The computer has to be connected to the Internet gt gt re ae nL mele SAS bit eh Wintov IF AW ik gt 24 mA HE EaR Help Topics GM GR BLE AY p lop Sie G USER AE Windows XP KEA PIRAM oe es Bete st i SAS B EM Windows Update SEMRRN E A MAII KREN icy Dji Voto P HECRWARA EP DRS OL ee i pce G OM CLA RMI a Computer information apa an can be viewed and nonan eeen the problem can be Rese SCAMMERS AARNA ER UEA ORD COOLS DD E TAS L h S E diagnosed Se Miroi Troubleshooting Information 2 6 Manual Document Operations To create documents WordPad or NotePad which is included in Windows or a separate specialized word processor program can be used such as MS Word Instructions for creating documents using WordPad is provided here E Creating a New Document 1 Click Start gt All Programs gt Accessories gt Wor
15. HBR Caution Using the battery e Battery is an expendable supply so when you use it for a long time e the capacity battery life is shortened If the battery life time is reduced to under half of the initial time we recommend that you purchase a new battery to use NJ Ow Battery Warning You will hear an alarm when the remaining battery charge is under 10 Connect the power cable or turn off the computer and install a fully charged battery W hen the remaining battery charge is under 3 the computer automatically Saves Current work and turns off This may be different according to the settings in Control Panel gt Performance and Maintenance gt Power Options gt Alarms tab Chapter 5 System Management 5 5 You can only change the detailed configuration in m Custom Mode Power Saving Effects 5 6 Manual Extending the battery use ime Mi Decreasing the LCD Brightness Decreasing the LCD brightness by pressing the lt Fn gt lt _ gt key combination on the keyboard or adjusting the brightness in the Battery Manager program extends the battery use time Decreasing the LCD brightness by one level extends the battery use time by 3 5 10 20 minutes The battery use time is determined by the corresponding model Mi Using the Battery Manager Battery Manager is a power management program that enables using battery power efficiently You can easily change the power mode by selecti
16. NOS Maintaining your LCD brightness settings after turning the system off and on 1 Turn the system on When the Samsung Logo appears press the lt F2 gt key to enter Setup 2 In the Boot menu change the Brightness Control Mode option to User Control 3 Save the settings and exit Setup When using the Battery Manager only the screen brightness set in Custom Mode is maintained To save the battery charge When your computer is operating on battery power adjusting the LCD brightness level to dimmer diminishes the battery power consumption Bad pixels in the LCD The limits of the LCD manufacturing technology allow a maximum of 10 abnormal or bad pixels which do not affect system performance This system may have the same level of abnormal or bad pixels as any other company s products Maintenance Instructions Caution When cleaning the LCD panel use only computer specific cleaners on a soft cloth and lightly wipe in one direction Adjusting the Volume E Adjusting the Volume using the Volume Control Button Adjust the volume by using the Volume Control Button E To adjust using keyboard Press lt Fn gt lt gt or lt Fn gt lt T gt from the keyboard E Using the Volume Control Program On the taskbar click the Volume 8 icon and adjust the slide bars L LIFEN For advanced volume control options double click the Volume E icon and adjust the settings in the Master Volume dialo
17. Priority You can select the booting priority among the devices such as the hard drive CD ROM drive etc The following example describes how to con figure the hard drive as the first booting device when the CD ROM drive is contigured as the first booting device by default 1 Select the Boot Menu in System Setup 2 Press lt Enter gt on Boot Device Priority item PhoenixBIOS Setup Utility Boot Boot Device Priority Item Specific Help NumLock Off Enable Keypad By NumLock Summary screen Disabled Boor time Diagnostic Screen Disabled PXE OPROM Only with F12 Select system boot options Brightness Mode Control Auto Smart Battery Calibration Select Item Change Values Setup Defaults Select Menu Select Sub Menu Save and Exit 3 Use the lt gt key to move to the Hard Drive item and press lt F6 gt key until it is at the very top Boot Options DVD CD ROM Drive Removable Devices 4 Press lt F10 gt to save the changed configuration and exit System Setup Now you can boot the system with the hard disk drive as the first booting device 6 6 Manual Configuring Resolution and Color Depth Screen resolution is the number of pixels displayed on the screen High resolution makes the overall screen area large although individual items appear small Color quality is determined by the number of bits used to represent a pixel on the screen High color quality displays more
18. Selecting or Running a menu or an Item After you move to a menu or item press the lt Enter gt key on the key board or double click it Or press the Enter button on the remote con trol gt Returning to the Previous Screen Press the lt Esc gt or lt Backspace gt key on the keyboard or right click it Or press the BACK button on the remote control Chapter 3 Using The Computer 3 31 E MUSIC The procedures for playing a music file or an audio CD will be described below 1 Select the MUSIC menu and select Category For example move to All Music 2 In the Library window select a music file to be played MUSIC MEI E Al Wie ke Music File Musician Album Category Pane My Play Lisi Repeat Button broene Track All Tracks Random Media Play Control Button CEECEE IOLE Nore Media Play Control Button You can only use the Media Play Control button when a music file is being played Playing Multiple Tracks 1 Play a music file 2 Move the focus to the left Category pane and select the Play All button Playing an Audio CD 1 Insert an audio CD into the CD ROM drive and select CD from the Category pane 2 In the right Library window select a track to be played E PHOTO The procedures for viewing pictures images and for viewing pictures through the Slide Show will be described below 1 Select the PHOTO menu and move to the All Photo category 2 In the Library window select
19. The security lock is a device used to physically fix the system when using it ina public place The locking device needs to be purchased separately The shape and methods of use may differ depending on the manufacturer Please refer to the manual provided with the security lock for proper use Fix the Kensington lock cable to a fixed object and connect the cable to the Anti theft port at the rear of the system 5 10 Manual Traveling with the Computer W hen traveling keep the system and the AC adapter disconnected O therwise it may affect the functions of the system Make sure that the system is not pressed by a book or heavy objects The LCD may get damaged W hen traveling by plane use a bag designed for notebook PCs and hand carry the computer Allow the computer and disks to pass through security X rays but do not pass the computer and disks through metal detectors Do not use the computer during take off and landing M ake sure the eject button of PCMCIA card slot is locked Chapter 5 System Management 5 11 EA Manual see At AA This chapter provides information how to use the system setup customizinig screen settings 6 2 Manual OS Sub Menu Using System Setup System Setup is a utility that enables the computer environment to be age to suit the user System Setup is used when changing the system password booting priority or when adding new devices Please use extra care
20. Using EasyBox The security management function will be used as an example here to show the func tion of Easybox E Configuring Firewall The Windows Firewall prevents unauthorized users from gaining access to your system via the network or the Internet 1 Click Start gt All Programs gt Samsung gt EasyBox gt EasyBox 2 Click Security from the top menu bar 3 Select Windows Firewall Settings from the Security menu on the left A Select a firewall level 5 Click Apply amp Fasy 80x a Epere KRIET z Windows Prk SK x E ani Windows BA MUP 7 ARRAN ARE HAARBERG Fh ERS PIEMITA y iow Update PATE ie QD ARA SPUR M MAS PHAR i AKER Click the User Setting button for advanced features including exceptions and permissions Chapter 3 Using The Computer 3 13 3 14 Manual Using Samsung Theme Samsung Theme is a program that enables a user to easily switch a theme desktop logon screen and sound effect Double click the Samsung Theme 2 icon on the desktop Or select Start gt All Programs gt Samsung gt Samsung Theme gt Samsung Theme Samsung Theme a Help button i Ea Close button Windows XP H TEATE TATT Move the mouse pointer over Samsung Theme item then the Samsung Theme will be displayed below gt Samsung Theme Switches to Samsung Theme desktop logon screen and sound effects on booting gt Windows XP Theme Switches to the Win
21. View mode you can select the screen resolution and color quality for each display device as if there were two separate graphics cards 1 Connect the external display device e g a monitor or a projector to the corre sponding port of the system To connect a TV connect the TV to the TV output port of the system See P 6 8 Connecting to a TV 2 Press touchpad right button on the desktop click Properties and then click the Settings tab 3 Click the monitor 2 icon select the Extend my Windows desktop onto this monitor check box and then click Apply BT Fe FIE 18 AE ERPHPE An Eti eR ETE SA RTA nt no abe E Hi Hi E Ge Whines 6 SE ee ERRAT ee oe wt en ema 4 When you have completed this click OK on the left of the Troubleshoot button The primary display device the LCD is indicated as 1 and the secondary dis play device is indicated as 2 Now you can use each of the two display devices as independent display devices lt Enter gt to deactivate the password 1 Primary 2 Secondary Chapter 6 Customizing your computer 6 9 6 10 Manual INOG When you use Dual View configuring the LCD as the Primary monitor is recommended If the screen of the secondary display device is displayed at 640x480 pixels with 256 colors change the settings to the desired screen resolution and color quality in the Display Properties window Caution E Deactiv
22. a restore point when you have purchased a new computer and before installing new programs or device drivers Before creating a restore point check that the computer is operating properly The procedures to create your own restore point are described below 1 Click Start gt All Programs gt Accessories gt System Tools gt System Restore 2 Select Create a restore point and than click Next AOU AMER AIR SHEE gt oh REISE AER HSA ERAAI AREH BRS R ATL GRIPA HRERS METERAN PI DETOCH PRA REEIRICAER RARE jE ee ee BS ADRE MIRRE RETIA OETTERREE DORR EIEVE IRR CPE RTIRERA gt tT TD AER ETE CANE ES AE AEM RANAGEE GEERE IREA P EH RAME MESHE MRE EAR Pete T F N gt HUAC 3 In the Restore point description box type a name to identify the restore point and than click Create A restore point has been created W Returning your computer to an earlier restore point The procedures to return your computer to an earlier restore point when a problem has occurred are described below T RAER apai re 1 wae Leptin A 1 Start gt All Programs gt Accessories BURAKA gt System Tools gt System Restore 2 Select Restore my computer to an ps a ea rl er ti m e 1 a n d cl i ck N ext SIGS BESS Rs MERANER Bb Cume kaip TAA RAER AGES CAVE ERRA gt MRSE SPE TRAD AEE gt BETE RRSiRAR Pl MARE NSS Since changes made after the apii Recovery Point may not be main
23. a sharing client When the setup is complete you can access the Internet from the sharing client by connecting to the sharing server Note As an example Internet sharing procedures for Connection 1 which connect the sharing server and the Internet through a wired LAN and connect the sharing Sharing Server A computer with 2 LAN interfaces that provide a function to share Internet Access Sharing Client A computer that uses the Internet by connecting to a sharing server without itself having a direct connection to the Internet You can connect a sharing server and a sharing client as follows See Figure 5 on page 4 17 Sharing Server External Internet Sharing Client Client Device g Wired LAN Wireless LAN Connect a sharing client Wireless LAN Wired LAN with the device that is the same as the client device Wired LAN Wired LAN of the sharing server To connect a sharing server and a sharing client using a wired LAN connect the computers with a LAN cable first To connect through a wireless LAN press the lt Fn gt and lt F8 gt key combination simultaneously to enable the wireless LAN When the wireless LAN is enabled the Wireless LAN Operation LED lights up server and the sharing client through a wireless LAN are described below Chapter 4 Connecting to the Internet 4 19 gt Setting Up a Sharing Server 1 Run Samsung Network Manager on the computer to be used as the sharing ser
24. complete click on Save to create the album The created album is saved in the My Documents gt AVStation premi um gt Photo gt Photo Album der and will be displayed in the Album category To view an album double click on Image in the left category pane and double click on Album Click on Slide Show in the Image window to view the images within the album through the Slide Show E Burning an Album onto a CD 1 Double click on the album to be burnt to CD in the left Album category 2 Insert a blank CD into the CD RW drive When the CD Drive window appears click on Cancel 3 Select Send gt Burn CD from the menu at the bottom of the Album window A Enter the CD title in the Burn a CD window and then click OK to burn a CD with the album Chapter 3 Using The Computer 3 23 MOVIE This section describes the procedures to play a movie file or a DVD VCD title Click on MOVIE in the Menu Selection Bar E Playing a Movie 1 Double click on Movie in the left category pane and double click All movies 2 Double click a movie file to play it MUSIC MOVIE Menu You can listen to the music files in My Playlist or Alll musics while working Movie Window Movie Category Media Play Control Button Note You can adjust the screen size in the View menu Playing a DVD Title To play a DVD title first install the DVD Power DVD player software 1 Insert a DVD title into the DVD drive 2 When the Select
25. ie eS i peA J Te Available AP tT SE re com Hron TTIE ir HOLRHAIN CI LEAF BEST wail i hae eam wall fig LTH RIRH E HAF iti a will bP Biases FT 3 The network key security key input window appears If a network key has been set for the wireless LAN AP enter the network key and click the Connect button For the network key information ask your network administrator If no network key has been set for the wireless LAN AP click the Connect button without entering the network key 4 When the computer is connected to the wireless LAN AP the Connected message will appear on the Wireless Network icon in the Taskbar gt Using the network after moving location By setting the network settings IP address printer setting etc for each location you can immediately access the network without performing the network setting procedures regardless of your location 1 Run Samsung Network Manager when connected to the Internet 2 Select an icon that represents the corresponding location from the Saved Locations window and then click Move 3 When the network settings of the selected location are applied the new location and the network connection information are displayed in the The detailed Information for window E Sharing Internet Access This section describes the procedures to share Internet Access To share Internet Access you first have to define a sharing server and
26. keyboard input Chapter 7 Recovering the Computer 7 11 7 12 Manual recognition time In this case the MS DOS command prompt Is repeatedly switched to full screen and then to W indows several times Please press the lt Alt gt lt Enter gt keys more quickly or press the lt Alt gt lt Enter gt keys using the sys tem keyboard Q12 When a TV is connected the Turn off monitor power option is not performed A When connecting a TV after booting up your computer the Turn off monitor power option may not be performed For it to operate properly it is recommend ed to connect a TV and then booting up the computer Modem Related Q1 I cannot hear the modem sound Al Check that the telephone line is properly connected to the modem A2 Check that the modem driver is installed properly 1 Click Start gt Control Panel gt Performance and Maintenance gt System 2 Select Hardware tab gt Device Manager gt Modems in the System Properties window and check if there is a yellow exclamation mark on the installed modem icon If there is delete the modem device driver and reinstall the driver because the yellow exclamation mark represents a not properly installed driver 3 If there is no yellow exclamation mark double click the installed modem and click Diagnostics tab gt Query Modem in the Modem Properties win dow to diagnose the modem No message in either of Command and Response in the Diagnostics tab means that the mo
27. manufacturer A3 Verify whether the environment is suitable for using a wireless LAN The use of a wireless LAN may be restricted according to the environment and distance O bstacles such as walls or doors affect the use of a wireless LAN e Install the AP in a high and open space 50cm from the wall and far removed from any other radio signal sources A4 Verify whether the AP is operating properly e When the AP is not operating normally turn off the AP and after a short while turn it on again e Verify whether the AP s firmware is the most recent version Contact the AP manufacturer or the place where you purchased the AP for details of the AP firmware A5 Verify whether the AP has been properly connected to the network Verify whether the network is operating normally by connecting the wired network cable which has been connected to the AP to your computer Chapter 7 Recovering the Computer 7 17 A6 Check the network key settings encryption key W hen automatic code conversion a passphrase function has been selected and data communication is not functioning even with a normal wireless connection it is recommended entering the network key encryption key manually A7 Check the AP settings as follows The following is recommended for a standard environment and thus may differ according to the specific wireless network environment e When several APs are present simultaneously check the channel setting for each AP When dif
28. of Samsung Co Ltd The information in this document is subject to change without prior notice The manufacturer of this product does not guarantee against data loss Please ensure that important data is backed up and stored separately to prevent from data loss Mi Registered Trademarks Samsung is registered trademarks of Samsung Co Ltd Intel Pentium Celeron are registered trademarks of Intel Corporation Microsoft MS DOS and Windows are registered trademarks of Microsoft Corporation Memory Stick and z are trademarks of Sony Corporation All other product or company names mentioned herein are registered trademarks of their respective companies This product incorporates copyright protection technology that is protected by method claims of certain U S patents and other intellectual property rights owned by Macrovision Corporation and other rights owners Use of this copyright protection technology must be authorized by Macrovision Corporation and is intended for home and other limited viewing uses only unless otherwise authorized by Macrovision Corporation Reverse engineering or disassembly is prohibited Appendix A 5 Safety Instructions Instructions for Setup SSS SSOSSOSS SSSSSSSSSSSS OS SSS SSS lt gt I SSS SSSSSES ISSSSESSSSSSSS Cee OSSSSSOSSOS BSS NASSE Set up the system on a stable work surface i If the system is dropped it may be damaged or it may inflict injuries
29. on the screen When you complete the settings the following screen appears Features Br Playlist pane pi T ut ie as LE w u x 0 a u s 1 g is Onn 3 Playback Controls area Nore To view detailed information on how to use Windows Media Player Run Windows Media Player and right click over the Function Taskbar and select Help gt Windows Media Player Help Chapter 3 Using The Computer 3 3 To Play an Audio CD 1 Insert an audio CD into the CD drive and a list of all available players is displayed automatically 2 Select Windows Media Player and click OK to play the audio CD Ade CD tbc eh ee See A FAE 3 BCD ERAM Windows Ay ET OHIE TEAT Ochib To Play a Video CD Insert a video CD into the CD drive When a video window appears double click the MPEGAV folder Double click the DAT file When a warning window appears click the Open with button In the new window click Select Program from List and click OK Select the Windows Media Player and click OK The video will start playing oe BREK mE a PURU BoE Dei EER he PLDT TE j5 nemt Explorer a Etj W rai Ce aiei Mecha Piyar are ial Fax F i ore ae SP E i E TN ie eS Eee ea DA ORARIN m J tm 3 4 Manual To Write Data in CD If your computer has CD RW functionality you can copy data to a blank CD or create an audio CD INlore An additional CD writing program is supplied i
30. that has been developed to enable users to use the network easily Samsung Network Manager provides the following features You can easily set up the network and printer settings You can immediately use the network without defining new network settings again after moving locations By setting the network settings IP address printer settings etc for each location you can immediately access the network without following network setting procedures each time regardless of your location You can easily share Internet Access You can share your Internet connection by setting up a computer with 2 LAN interfaces wired and wireless or 2 wired LAN as the sharing server Then you can access the Internet on a sharing client by connecting to the sharing server You can diagnose the network status You can diagnose the network status when the network is not properly connected E Using the Network This section describes the procedures to connect to the Internet by setting up a network The setting up procedures include the procedures to add a printer to the network Nore The setting up procedures are different for wired and wireless LAN connections To use a wireless LAN there should be a wireless LAN AP available nearby gt Setting Up a Network 1 To use a wired LAN connect the LAN cable to the LAN port To use a wireless LAN press the lt Fn gt and lt F8 gt key combination simultane ously to enable a wireles
31. the Internet on the sharing client select a sharing client icon from the Location List window and then click the Move button If the connection is broken while using the Internet on the sharing client click the Ap Active from the Wireless menu to reestablish the connection Chapter 4 Connecting to the Internet 4 21 4 22 Manual E Network Status Diagnosis You can diagnose the network status when the network is not properly connected 1 2 3 Run Samsung Network Manager Select Diagnose Status from the Manage menu The Network Connections figure window appears Click the Start button to start the network diagnosis When the diagnosis is complete out of order devices are marked by the exclamation mark icon For detailed device status read the description in the lower part of the window SEAR InteliR PRO Wireless 220086 Network Connection s ASE Bee era broadcom 44Ux LOS LUU integrated Controller fie Using Network Services While the computer is connected to the network you can use network services to share files folders and printers INJ RQ Network services are provided for the computers that are connected to the gt network through wired or wireless network connections See Pages 4 3 4 7 gt Configuring Network Environment Settings Sharing files or folders This section describes how to share files and folders between computers connected to the network To share files complete th
32. time to synchronize the computers to share an Internet connection after the Internet connection sharing configuration is completed If you cannot share Internet connection even after a longer period restart the computer A2 Check if the connection between the network adapters is configured to bridge If there is a configured bridge connection between the network adapters through the network configuration wizard remove the network bridge and reconfigure the Internet connection sharing A bridge connection is created when you ran N etwork Setup W izard from the N etwork Connections window and selected both the internal connection adapter and another adapter in the wizard Q4 I cannot connect to the AP Check the Computer Settings Al Verify whether the wireless LAN function of the computer is on by doing the following If the wireless LAN function is off turn it on e For Windows XP verify that the wireless network connection has been set to Enable in Start gt Control Panel gt N etwork Connections e If there isa Wireless LAN On Off button check if the wireless LAN button is pressed A2 Verify whether the same network key encryption key has been entered in both the AP and the computer The network key is an encryption key for encrypting data transmitted between the AP and the computer It is recommended setting the network key manually Check the AP Settings For the AP settings refer to the User s Guide provided by the AP
33. to launch the corresponding player gt Samsung Update Plus Area When there is new software or a new driver the Samsung Update Plus notification window appears If you click on the notification window Samsung update Plus is launched and an update is performed with a percentage number indicating the progress status This chapter provides instructions on connecting to the Internet 4 2 Manual Connecting to the Internet The following options show many ways to connect to the Internet An appropriate option should be selected depending on the user s working environment and the user s system specifications Option 1 Connecting using a modem and a telephone line Service has to be applied for and received from an Internet Service Provider ISP through an Internet service account Option 2 Connecting using a High speed communication network service such as ADSL and VDSL Service has to be applied for and received from a High speed communication network service provider Receiving Internet service may require support from specific devices Contact the service provider for details Option 3 Connecting using a wired LAN Use a LAN cable that is already installed in your office or building Option 4 Connecting using a wireless LAN The Internet can be accessed without a telephone line or a LAN cable if there is a Wireless LAN AP Access Point nearby INlore The Wireless LAN function is optional
34. use lt Wake On LAN gt function 1 Click on My Network Place gt View network connections on the Desktop 2 Right click over W ireless N etwork Connection and select Disable Q2 When I connected 100Mbps wired LAN and the computer exits standby hibernate mode a message informing 10Mbps wired LAN connection appears A When the computer exits standby hibernate mode restoring the network takes about 3 seconds W hen the network is restored it operates in 100M bps Chapter 7 Recovering the Computer 7 15 7 16 Manual Wireless LAN Related Refer to P 4 7 Configuring the N etwork Environment Settings for W ireless LAN Network W LAN for the basic uses of a wireless LAN Q1 The Wireless LAN device is operating properly but I cannot connect to the Internet or to another computer This is due to an inappropriate configuration Check the following check lists Al If you are using a computer to computer Ad Hoc network connection check that the name of the configured network SSID is correct The network name SSID is case sensitive A2 If you are using a network key encryption key you have to use the same net work keys for an AP Access Point or a computer to computer network Ad Hoc The network key of the AP is configured in the AP management program Ask your network administrator or AP manager for more detailed information A3 Check that the device driver is properly installed If the driver is not properly insta
35. when configuring System Setup as it may cause serious system error To enter System Setup 1 Turn on the computer 2 When the booting screen appears press lt F2 gt 3 The initial System Setup screen will appear in a moment PhoenixBIOS Setup Utility q Main Advanced Security Boot Exit Setup Menu 10 21 53 Item Specific Help 20ra lt Tab gt lt Shift Tab gt or Jo lt Help lt Enter gt selects field Displays help information on the current selected item System Time System Date Primary Master XXXXX MB IDE Secondary Master CD ROM DVD Cpu Type Intel R Pentium R M Cpu Speed X XX GHz Total Memory XXX MB Slot1 Memory XXX MB Slot2 Memory Not Installed Setup ltem XXXXXXXX XXXXXX BIOS Version Micom Version Fi Help T4 Select Item F5 F6 Change Values F9 Setup Defaults Esc Exit Select Menu Enter Select Sub Menu F10 Save and Exit Navigation Keys Use these navigation keys to view and change the System Setup settings Press lt enter gt to display sub menu System Setup Menus Menu Items Description Main Configures the basic system environment Advanced Configures OS and major chipset options of the system Security Configures system security options Boot Configures booting options Exit Exits System Setup For more information on System Setup menus or options please refer to Help on the right
36. Access and CCX Cisco Compatible eXtensions To connect to a wireless network consisting of the WPA and CCX 1 2 2 8 or higher version of wireless LAN driver have to be installed on your computer and certificates or PROSet may be required depending on the network settings For driver update visit www samsung com and for information on the PROSet installation refer to P 4 13 Wireless Network Setup Using the Wireless LAN Setup Program For more information ask your network administrator Mi RF Specifications R F Frequency Band Support Channels Device Description 2 4GHz SGHz Channels allowed per country Transceiver Power Transmission Method Data Rate Mbps Antenna Type 5 mW 11a mode OFDM 11b mode DSSS 11g mode OFDM 1la mode 54 48 36 24 18 12 9 and 6 11b mode 11 5 5 2 and 1 11g mode 54 48 36 24 18 12 9 and 6 Internal Antenna 2 EA main aux The data rate may differ from the actual data rate 11a mode is supported only when the device is connected with an IEEE802 11a device e g IEEE802 11a compatible Access Point 11g mode is supported only when the device is connected with an IEEE802 11g device e g IEEE802 11g compatible Access Point Copyright Samsung Co Ltd owns the copyright to this manual No part of this manual may be reproduced or transmitted in any form or by any means electronically mechanically or through audio without the consent
37. An access point is represented by the 4 icon and a computer to computer network is represented by the icon An 8 icon is displayed in front of an access point or a computer to computer network with configured security settings 3 Enter Profile Name and click Next 4 In the Search Security Settings window the wireless network security search message will appear Click Next 5 Enter the network authentication data encryption WEP encryption level key index and wireless security password configured for the target access point or computer to computer network in the Security Settings window and click N ext N J wA The network authentication data encryption W EP key index and password of a access point are configured in the access point management program For infor mation on the security information check the security settings of the access point or ask your wireless network administrator To connect to an existing computer to computer Ad Hoc network enter the password configured when creating the computer to computer network for the first time You do not need to enter network authentication or key index Security Settings Network authentication The network authentication option includes O pen System and Shared Key W hen you select O pen System no authentica tion is applied however encryption is supported W hen you select Shared Key a WEP key is used for authentication The default setting is O pen Sy
38. Control Button EN Operation Display Window Chapter 3 Using The Computer 3 27 Note Playing a Music File 1 Double click a category from the left category window 2 Double click a music file in the right library window The music will be played Playing an Audio CD 1 Insert an audio CD into the CD ROM drive Audio CD will be displayed in the library window To play an audio CD in the CD ROM drive double click on CD in the cate gory 2 Double click Audio CD in the library window The tracks of the CD will be displayed 3 Double click a track to play it To Listen to All Tracks Select Play All Tracks from the Media Play Control button E PHOTO Viewing a Picture he procedures for viewing pictures images and for viewing pictures through the Slide Show will be described 1 Double click on PHOTO in the initial screen of Play Mode 2 Double click All Photo from the left category and double click an image file in the Library window wal PHOTO All images Category Window Pe MATN ec Library Window MUSIC fs You can listen to the music files in My Playlist or All musics while working INlo e Viewing an Image through the Slide Show or Full Screen Select Slide Show or Full Screen from the menu at the bottom of the zoomed image screen 3 28 Manual E MOVIE Playing a Movie The procedures to play a movie file or a DVD VCD title will be described below 1 Double click MOVIE in the initia
39. E MRE wA ARA EEan A BRE nedya taton AntiVirus If a virus is detected select Automatic in Norton AntiVirus and click Next to delete the virus Chapter 6 Customizing your computer 6 11 6 12 Manual This chapter provides recovery procedures using the System Recovery CD when the computer is not Operating properly 7 2 Manual Restoring the System Now gt This description is only for models running W indow XP The System Restore function allows you to restore your computer to an earli er copy called restore point and restores the settings if a problem occurs The System Restore function is provided by W indows XP to enable the reso lution of various problems without reinstalling W indows XP completely You can use System Restore in the following cases e The system files are deleted or damaged by mistake e The system is unstable or a problem occurs in a device driver e A problem occurs after changing system files such as the registry e A problem occurs after installing a new program fi Creating a Restore Point Restore points are created at predetermined times and at times of significant system events such as when a program or a driver is installed You can also decide when to create your own restore points Nowe There has to be more than 200MB of free space on the hard disk drive If the disk space is insufficient a saved restore point might be deleted You are recommended to create
40. Eaa eB eee eR i SP Test Now BATERIAREN oll TSE EAE ie ees Be ee W hen a network key is not i i aE defined for a selected AP Tr AERP ANEA p Testi click on Link to display Fp BPMN i SHS eG oil the warning message box z Then click Connect again in ee the box Now when Connected in AP is displayed and you can access the network Checking the connection status Move the mouse pointer over the Wireless Network Connection icon on the taskbar and the connection status is displayed Connecting to computer to computer networks peer to peer or ad hoc In computer to computer wireless networks you can wirelessly connect 2 or more computers that have wireless LAN modules Using this method a computer that is not connected to the Internet can share the Internet by accessing another computer connected to the Internet See P 4 19 Sharing Internet Access You can connect by completing the following steps gt Step 1 Set up a computer to computer network on a computer gt Step 2 Connect to the configured computer from other computers E Step 1 Setting up a computer to computer network 1 Right click on the Wireless Network Connection icon on the taskbar and select View Available Wireless Networks BINA Windows hid RARER Fea ears r thu T IE FR E PH Fh Pea as N RRCD 2 ARTEEI MAEI p Test a ner sepnesa sad ia Testi Le PSS yee alll i
41. Software Media into the DVD ROM drive Windows installation complete To continue to install drivers and applications insert the System Software CD System Software Media and follow the instruction Do not show this message from next time After a short wait the System Software Media Start screen will appear Now The drivers and applications from the System Software Media need to be e installed Windows cannot be used without them 6 Selecta menu from the System Software Media Start screen and install the drivers and application programs W hen the installation is complete the computer will automatically restart and the W indows registration screen will appear NJ wS For more information about the procedures to use the System Software Media refer to the descriptions of P 7 4 Re Installing Software If the System Software Media consists of 2 CDs W hen the installation of the first CD is complete the W indows registration screen appears See Step 7 Install the second CD after registering W indows 7 When Start Microsoft Windows appears click the Next button Nowe Register W indows referring to the descriptions of the Installing and Registering Microsoft Window s section of the Installation Guide gt If the System Software Media consists of two CDs insert the second CD for program installation into the DVD ROM drive after completing the W indows registration Q amp A This section provides
42. Started 1 5 1 6 Manual Creating and Changing User Accounts Multiple users can be registered in a single system so that each user may use their own customized working environment Procedures to register and change user accounts are provided below E Registering a new user 1 Click Start gt Control Panel 2 Click User Accounts gt Create a new account 3 Type a name for the new account and click Next 4 Select the account type and click Create Account The new user account has been created Nore To login with an Administrator Account To delete a user account 1 Click on a user account to delete and click Delete the account 2 Select either Keep Files or Delete Files and then click Delete Account E Changing users 1 Click Start gt Log Off 2 Click Switch User Sh Windows 3 In the Windows Log On window select the desired user name Touchpad Movement of the pointer arrow on the screen will correspond to movement made with a finger on the touchpad x Touchpad Touchpad buttons the two buttons below the touchpad provide identical functions to buttons of a mouse Nore Locking the touchpad You can lock the touchpad and use only the keyboard and mouse To lock the touchpad function press the lt Fn gt lt F9 gt key combination E Click Select Function Place a finger on the touchpad move the pointer on the screen to the icon or item to select and tap the touchpad o
43. Work window appears select using Samsung AVStation premium and click OK to play the DVD title If the DVD does not automatically play or the DVD title is in the DVD drive double click the Title of the DVD in the DVD VCD category Playing a VCD Title 1 Insert a VCD title into the CD drive 2 Double click the Title of the VCD in the DVD VCD category 3 24 Manual Movie Editor Editing a Movie This section describes the procedures for editing a movie Click on MOVIE EDITOR in the Menu Selection Bar E Editing a Movie The procedures for merging two movie files and for inserting transition effects between movies are described below 1 Click on MOVIE EDITOR A new project will open 2 Double click Movie in the left category pane and double click All movies 3 Drag and drop a movie file to the Storyboard When a Storyboard appears in the right pane drag and drop another movie file to the Storyboard Bed AVS tION premio MUSIC in wune OB rest a wont d reaa MOVIE EDITOR Menu You can listen to the music files in My Playlist or All w Work Tab musics while working wl i F i L 1 AVStation pPrEnNiNT gamps mety rsh a Movie Category PrE Storyboard Background Music ai mm FF G locator beard akinena haane Create Movie gt To Enter the Title Click on Text Box from the Title tab create a text box by dragging the pointer and enter a title Enter the title and then click Apply The title is ins
44. al settings are not required You can confirm the setting as follows 1 Double click the Volume E icon in the notification area of the Taskbar and select Options gt Advanced Controls 2 Click the Advanced button below the Master Volume and check if the 1 Disable Digital Output item is unselected The option must be unselected for sound to be output in digital format E Step 3 Enable S PDIF on the DVD program When using 5 1 channel speakers you need to install the Power DVD program from the Power DVD Installation CD separately supplied and then change the settings as directed in these steps 1 Run Power DVD and click the Settings button E ERE MARE H Bebe HERE aah Saga n Et RTE SL ea ie ae Lee _ lt r n CGIM Ce Ca Now you can enjoy home theater using DVD titles Caution To control volumes for your 5 1 channel speaker use the control on the digital amp Please refer to the speaker manual 3 8 Manual Using the Multi Card Slot Using the Multi Card Slot you can use memory cards such as a Memory Stick Memory Stick Pro SD Card MMC or xD Card A memory card is used as a removable disk and is useful for exchanging data between a computer and a digital device such as a digital camera ile FUFILM ree Memory Stick Pro SD Cord xD Cord Caution Restrictions on Using Memory Cards You can use memory cards for storing data only Copyright protection
45. alling into the computer may cause disk or data damage Power failure during hard disk operation resulting in resetting the computer may cause disk or data damage Execution of delete DEL or format FORMAT commands by mistake may cause loss of data Virus infection may cause unrecoverable loss of data N An abrupt power cut during program operation may cause disk or data damage Moving the computer or impacts to the computer during hard disk operation may cause data loss or bad sectors on the hard disk Be sure to make backup copies of important data The Manufacturer is not liable for lost data Turn on peripheral devices before turning on the computer Otherwise damages may occur Turn off the computer before turning off other peripheral devices Otherwise damages may occur Do not touch the modem telephone lines and exposed electrical terminals during a thunder storm There is a danger of electric shocks or fires Before disassembling the system turn the power off and disconnect the power cable There is a danger of electric shocks Appendix A 7 A 8 Manual Use only authorized parts and do not disassemble repair or modify the computer unless at an authorized dealer Use authorized service centers as the system may be damaged Do not touch the power strip with wet hands There is a danger of electric shock Place the computer away from heat devices such as heaters It may damage the system or c
46. an image to view 3 32 Manual All Images Image Files Category Pane Library Pane Media Play Control Button MUSIC You can listen to the music files in My Playlist or Alll Music while working Viewing an Image through the Slide Show or Full Screen In the lower menu of the zoomed in image select SlideShow or Full Screen Nore E MOVIE In the Library window select a video file to watch 1 Select the MOVIE menu and select a category For example you can select All Movies by using the direction keys 2 In the Library window select a video file to watch The selected movie file will be played All Images om l ne d A Video Files Pendevaat tor liom Letter Category Pane mef ye Library Pane Chapter 3 Using The Computer 3 33 Noite Playing a DVD VCD title Insert a DVD VCD title into the DVD ROM drive and select DVD VCD from the Category pane After a short while the DVD VCD title will be played Using the DVD VCD Play Control Button To use the Play Control button while playing a DVD VCD title press a key or move the mouse To play a DVD title for the first time using AVStation now launch the DVD player in Windows once before starting play The region code of a DVD title must be set to Windows status for AVStation now to play the DVD title properly i Tips gt Using the Library File AVStation Now can use the library of AVStation premium To use the library in AVStat
47. appears select using Samsung AVStation premium and click OK Then the audio CD is played oe Fai ee To play an audio CD in the CD ROM drive oe double click CD from the Category and ay tank double click on Audio CD when Audio CD Mo i appears in the bottom screen Ce Audio CD window Chapter 3 Using The Computer 3 19 Copying an audio CD to the Computer 1 Insert an audio CD into the CD ROM drive 2 When the Audio CD window appears select using Samsung AVStation premium and click OK 3 Select a track to be copied to the library and then select Tools gt Copy from CD To select multiple tracks select the tracks while pressing the Shift or Ctrl key on the keyboard ipo Brees wee Fee Select the tracks to be copied 4 The selected tracks are copied from the audio CD When the copy operation is completed the Copy Completed message will appear The copied tracks are saved in the My Documents gt AVStation premi um gt Music gt Music From CD folder E Burning an Audio CD 1 Insert a blank CD into the CD ROM drive When the CD Drive window appears click Cancel 2 Select Tools gt Burn CD Ae ee a mwa eee Select Burn CD AVStationpreniun Music 1 QAR a 3 Select Burn Audio CD and click Next A Double click Music in the left title and double click All musics 5 Select music files from the list and click the Add files from my PC to the CD burning list 2 button to move the selected
48. ating Dual View Mode Click the monitor 2 icon clear the Extend my Windows desktop onto this monitor check box and then click Apply To move a window between display devices in Dual View mode Click the title bar of the window in the primary display device 1 the LCD and drag it to the secondary display device 2 The window moves to the secondary display device Nore Checking for Viruses The Norton AntiVirus software is provided as the virus inspection program Noirs 3 When you first run Norton AntiVirus the Norton AntiVirus Configuration window pops up If you complete the configuration and your computer connect to network you can download and install the latest updates via the network When the live update is done virus scanning starts automatically To stop scanning click on Stop If you didn t configure the Norton AntiVirus program a security alert icon E appears in the notification area on the right of the task bar This indicates that the current security state of your computer is not secure Configure the virus scan ning program to make the security alert icon disappear Select Start gt All Programs gt Norton AntiVirus gt Norton AntiVirus 2005 Click Sean Virus select drive to inspect and click Sean Vaccines for the latest viruses can be downloaded by TETA connecting to Symantec s ZARE SUE homepage se NHE EED J aina saa A Ghat iriti LEVER
49. ause fires Clean with cleaners specifically for computers Do not use benzene paint thinner or alcohol to clean the computer It may dam age the product Customer Service Center General Enquiry Hotline 2862 6001 Technical Support Hotline 2862 6406 E mail service sehk samsung com Web Site http www samsungelectronics com hk BA68 03002A10 050620
50. ccess point check the settings of the access point or ask your wireless network administrator Operating Mode Network Infrastructure Connect to an Access Point Select to connect to an access point Device to device Ad hoc Connect directly to other computers Select to create a computer to computer Ad Hoc network 3 Configure password setting to be used for computer to computer network connection in the Security Settings window To connect to an access point enter the network authentication data encryption WEP encryption level key index and wireless secu rity password configured in the access point Nowe Itis recommended to configure data encryption for security purposes when creat ing a computer to computer network connection profile For more information on security settings refer to the security settings in Connecting to AP or Help W hen you are creating a computer to computer network connection profile the network authentication setting is disabled 4 When a profile creation is completed the new created profile appears in the profiles list Select corresponding profile and click Connect to connect to the created profile W hen a wireless connection to the created profile is established the connection icon appears in front of the name of the connected profile Chapter 4 Connecting to the Internet 4 15 4 16 Manual Using Samsung Network Manager Samsung Network Manager is a program
51. dPad 2 Create and edit your document For more information about WordPad refer fo on line Help O Sit WoriPal Bee BHD Be MAD Moto Re Den k Ba T TR HET s LO El CHINESE MOS v B7 U EEA E F E a er Oe re en Sen ii SRE Pyar E Saving a Document 1 Select File from the Menu and click Save 2 Click on the Save in field to specify a folder to save the file in enter the name of the file in the File Name field and click Save ro Qaxe _ m war Save Location My eBook Jeane ol nee ARMEE Senge 3 MANEH ai mH PES Pe Fam ts z ELS ulin ai ERA SSE Enter File Name TART Rach Text Formal RTF RA Chapter 2 Introducing Windows 2 7 2 8 Manual E Opening a Document 1 Click Start gt All programs gt Accessories gt WordPad 2 Select File From the Menu and click Open 3 Click on the Look in field and specify the folder in which the file is saved 4 Select the file to open and click Open Printing a Document To print a document connect a printer to the computer For more information about connecting and configuring a printer please refer to the printer manual To print a WordPad document 1 Turn on the printer and insert paper 2 Open the WordPad file to print 3 Select File from the Menu and select Print 4 Click Properties adjust the printer options accordingly and click OK 5 In Print window click OK to print the d
52. dem is not operating properly Diagnose the modem again after restarting the system or reinstalling the driver You have to exit all programs using modem in the advance of diagnostics of the modem A3 Although can make a connection with the modem cannot hear the dial tone and modem connection sound In this case check the following list 1 Click Start gt All Programs gt Accessories gt Entertainment gt Volume Control 2 Clear the Mute check box in the Telephone Line item Depending on the sound driver it may be displayed as another name such as Modem Phone Mono If there is no corresponding item click Options gt Properties gt Volume Control select Playback and select the Telephone Line under the Display the following volume controls Click OK Q2 I cannot make a call using an extension line A In general the dial tone of a PABX or a digital phone switching system is nota continuous one unlike that of a trunk line Therefore the modem may not make a call because the modem mistakes the dial tone from a PABX or a digital phone switching system as a busy tone In this case complete the following procedures Chapter 7 Recovering the Computer 7 13 7 14 Manual e Using an AT command As an initialization command use the command ATX3 Otherwise enter the ATX3 command manually before making a call It can correct this problem by skipping the dial tone check step Configuring the Modem
53. dows XP default Theme gt Back Restores the theme to its previous status Using Samsung Update Plus Samsung Update Plus is sofware that examines and updates Samsung software and drivers installed on your Samsung computer to the latest version To use Samsung Update Plus your computer has to be connected to the Internet E To Update Samsung Software and Drivers 1 Select Start gt All Programs gt Samsung gt Samsung Update Plus gt Samsung Update Plus If this is the first time you are running the program a window will appear asking you if you agree to the agreement in the window gt Click Agree to use this software Nore 2 Click Search for and Install Updates and click the Search for Updates button See Samary Updos Pie ee ee Fit serg OE He TEE RAEIE TERRE Ae 7 SRS FE ae 3 If there are available software or driver updates for your computer the available updates will be listed Select the required updates from the list and click Install Update to start the update Chapter 3 Using The Computer 3 15 3 16 Manual wen ay Plus gt RERGRER gt BRERNKY cnet Sound Driver Sigmatel O Major Auto v6 14 10 4192 see gt szme Sound Oriver for Signal C Map Auto 6 14 10 4192 Update List ult OSs a8 ball PEL AREER SECS DRR OTER Graphics Driver intel 020656 Graphics Controler 614 103595 SA s7me Intel G20656 Graphics Conrolier
54. e A When you use lt Fn gt lt 0 gt keys while playing a 3D game a system error may occur Do not use lt Fn gt lt a0_ gt keys while playing a 3D game Q4 lt Fn gt lt gt Key combination does not work A While displaying video of VCD or MPEG or the display setting is Dual View you cannot toggle display devices Also the installation of NetWare Client 32 program disables the function of lt Fn gt t lt 2e gt Q5 While playing a game pressing the lt Fn gt lt gt keys does not work or the screen is not properly displayed A Some games and 3D application programs may change the display device control Therefore pressing the lt Fn gt lt Ee gt keys may terminate the running program or may display an abnormal screen Press the lt Fn gt lt ao gt keys before launching a program and do not press them while running the program Q6 Running speed of a game is too slow or fast A Change the setting of Power Schemes to Always On Click Start gt Control Panel gt Performance and Maintenance gt Power Options gt Power Schemes tab then configure the Power schemes field to Always On Q7 Pressing lt Fn gt lt gt keys while running a game may cause abnormal operation of the system A Do not press lt Fn gt lt lt gt keys while a game is running because it may cause a system error Q8 Some part of a game image is not displayed or is displayed in black
55. e CD Rom Drive sc acssacsassarvacaasarasgnaciecsooe anaanennastiansnanareaniorcnne 3 2 Enjoying Home Theater sivicsacsessaacansnssnionaahsastianadisiaaavestehsoitianaivanshstaes nated 3 7 Using the Multi Card Slob sis nrschinaiajscansasiainiss devueopnenieitanimnateminencauaetuns 3 9 Using the PCMCIA Card Slot cccccccccsscssesecsecsecsscsececsecssesessecsesseesteae 3 11 enig Eey ON enren E E EE 3 12 Using Samsung Theme cccccccsccssescsscssesscsecsecsecsscseeacacsscessecseeseesseaes 3 14 Samsung Update PLUS is vayivosvriadciewiubsieninonisesainisins ints dinisins insnndslvvaias bivedesanioanio 3 15 Using AVStation premium ccccccssccecssssceeceeneeeessneeeeceneeeceeeaeeeeseneeeseaas 3 17 Using AVStation TOW sai cescisicnniiiatoatstesccdrvatedtitnincisacdsiseenesiabinhiisvnctadinesansie 3 30 Using Samsung Command Center ccccccccccescssesecsecsseseessssseecsessseseesees 3 35 4 Connecting to the Internet Connecting to the Internet c ccccccccccscsscescsscssesecsecscescesesecsecsecseeseeseeaeeas 4 2 Connecting to the Internet Using a Modem ccccccccccsecsecscescsesssesesseeseens 4 3 Configuring the Network Environment Settings for Wired LAN Connections 4 4 Configuring the Network Environment Settings for Wireless LAN Network WLAN 4 7 Using Samsung Network MONndger cccccccccsecscsecsecseseesecscseeseeseseeseeeeeees 4 16 Using Network Service cccccccccscsscsscssescesessceecs
56. e following procedures gt Step 1 Configuring the sharing of files and folders on a computer gt Step 2 Accessing shared files and folders from another computer Caution When a file or folder is shared anyone connected to the network can open and delete the shared file or folder Configure a file sharing network only when the network is secure and do not share important data Chapter 4 Connecting to the Internet 4 23 i Step 1 Configuring Sharing 1 Right click the target file or folder to share in My Computer and select Sharing and Security O FERE C DER a EAE HEE WRO WAEA IHD WHH ko amp Ps ml E L 6 gt a ag gt FAR E 04 T e CA E tz HHA x _ ere aol Documents ond Settings a effect Y 0vSla Se REC J 138i 4 O Document snd Settings _ Ey 1386 A O MyFoier DR oH a iy Progen Files Ll Aa HERCE 7 S WINDOWS page a oh DVLICD RW SR D teh coh HE MemonyStick E Program ri ml mel C HHS D fal Wy mepe 3 6 Tertit m winpoy PESMU ja Hi LAA Hy F T 3J RERA HENC PUPS PRED Ems Mo Pla 2 Click IF you understand the security risks but want to share files without running the wizard click here Noirs It has the same security effect as that of the Network Setup Wizard This screen does not appear if Internet Sharing Network Wizard has been installed in the computer to computer wireless network environment 3 Select Just
57. e library will be used as an example below 1 Click on Register File at the bottom of the screen 2 Click on Add by folder and select the folder to be registered and then click OK 3 When the registration is completed click OK The registered multimedia folder will be displayed in the music image or video categories of the library Note To play a file not registered to a category select File gt Open File and e select the file Using Play Mode This section describes how to use the Play Mode of AVStation premium To use Play Mode select Mode gt Play Mode in the Window Mode Menu Bar Alternatively click the AVS button on the remote control INIOFQ For more remote control use procedures refer to Using the Remote Control gt P 1 14 E Play Mode Screen Layout The initial screen of AVStation premium Play Mode has the following layout Exit Program i54 AVStation premium Minimize Screen Move Bar This appears only when the mouse pointer is over it Move to the Initial Screen of Play Mode Switch to Window Mode Menu Nore To switch to Window Mode move the mouse or ae ana click the Window icon from the toolbar at the top of the window E MUSIC The procedures to play a music file or an audio CD will be described below Double click MUSIC in the initial screen of Play Mode GS MUSIC ymm o Category Window Library Window Repeat Button Track All Tracks Random Media Play
58. e office through wireless LAN devices W hen a computer to computer network has been constructed a computer that is not connected to the Internet can share the Internet by accessing another computer connected to the Internet See P 4 19 Sharing Internet Access AIORA The description in this section refers to the Intel R PRO Wireless 2200BG N etwork Connection hereafter referred to as an 802 11BG card and the Intel R PRO Wireless 2915ABG Network Connection hereafter referred to as an 802 11ABG card device A wireless LAN card is optional The model of the wireless LAN card is determined by the relevant product To view the installed wireless LAN card click Start gt Control Panel gt Performance and Maintenance gt System gt Hardware tab gt Device M anager The wireless LAN connection settings will be described on the basis of the W indows XP Service Pack 2 installed computer It is recommended using the default settings provided by Windows XP for the wireless LAN settings for Windows XP installed computers To setup using the software supplied by the wireless LAN card manufacturer refer to p 4 13 Using a wireless Network with the Wireless LAN Setting Program To use the wireless network you have to turn on the wireless LAN function by using the Wireless LAN On O ff Button See P 1 8 W ireless network connections can be classified into two categories 1 Access Point You can connect to an AP
59. e task bar W ith the Security Center feature added Windows XP SP2 checks the Firewall the automatic updates configuration and installation of virus checking programs to display a Windows Security Alert icon on the right part of the task bar when it judges that the computer is vulnerable to attacks from the Internet In this case check the following to install the necessary components A1 Set up the W indows Firewall W hen you set up the W indows Firewall you will be protected from unauthorized access through the Internet or the network 1 Click on W indows Firewall in Start gt Control Panel gt Security Center gt Manage security settings for 2 From the General tab of W indows Firewall select ON recommended 3 If you want to allow a certain program or service to gain access to your com outer using the Firewall select and check the program or service that you want to allow access from in the Exceptions tab of the W indows Firewall If you want to add a program to Programs and Services click on Add Program and select it A2 Setup Windows Automatic Updates This automatically downloads and installs critical updates via the Internet to keep your computer up to date 1 Click on Automatic Updates in Start gt Control Panel gt Security Center gt Manage security settings for 2 From general tab of Automatic Updates window select Automatic recommended A3 Keep your computer current with the latest virus updates ex Nor
60. e wireless LAN related program then check whether the window is enabled A3 Initialize the device driver Click Start gt Control Panel gt Performance and Maintenance gt System gt Hardware tab gt Device Manager gt Network adapters and select the wireless LAN adapter Right click the network adaptor and select Disable from the popup menu Then right click over the network adaptor and select Enable after a short wait to check that the device is operating properly 7 18 Manual A4 Right click the My computer icon and select Manage W hen the Computer Management window appears double click Services and Applications on the left and then click Services from the sub menu tree Select the Standard tab in the right pane double click Wireless Zero Configuration and check that Startup Type is configured to Automatic and the Service status is Started A5 In the case of W indows XP click Advanced in the W ireless N etwork Connection dialog box see p 4 8 Connecting to an AP and make sure that Use W indows to configure my wireless network settings is selected This may happen when a third party wireless network setup program e g PRO Set other than W indows XP default program Is installed For setting up a wireless network using the W indows XP program this option should be selected Q6 When connecting to a computer to computer Ad Hoc network cannot connect to another computer connected to the same computer
61. ecsecsecsecseeseeseeeceecseeseenees 4 23 Using Bluetooth Devices cccccccsccsccsscsecseeecsecsecsecsecsecseeseeseeassasseeseeaees 4 29 5 System Management Managing POWER sy eacdcirusaladincudedsmacdunsuersidoncaddinnaaiionnaiiumasieimeiienaniieteages 5 2 Usmo me BGNELY lt ccasiamiossernssatsmnaeraaaceneaeiesiedntenehaaieenienari serena 5 4 Upgrading Memory cccccccccscsscsscssescesecsececsecsecsecsecsecseesseseeecseceeseeneeass 5 8 Using the Security LOG a scteanenacterennstennnnsabsunaciim pace oseononn noite ieueaacies 5 10 Traveling with the COMpUIE cccccccccccscsscsscsecsecsseseesecsccscsacsacsessesseessens 5 11 6 Customizing your computer Using Systemi SET encrena reon a r 6 2 Configuring the Password c ccccccsssscsscsssscsecsssscsecssecsecassscseesssesseeateasseeas 6 4 Changing Booting Priority i icevesswssanvessviswnsiesSvensiynsandssdoveaninninbdatannsisanssicvns 6 6 Configuring Resolution and Color Depth ccccccccccsccsccssesessessesssecseseeseens 6 7 Using External Display Devices cccccccccccccsscsscsscsecseeseeseeseessacsaeseeseene 6 8 Checking for Vf 05255 cerrystasscaetacssecsasnczszanessesnsanennns i ET iTO i e 6 11 7 Recovering the Computer Restoring the System ccccccccccccsscsscsecsccscsscsecsecsecseeseeseeaseacsasasesesseeseeass 7 2 Reinstalling SOMWANCss5102yshsqvtsvsananiavancstacrnuppbestaniacssouauniapniieesarmmseiNentiinen 7 4 Re Installing Windows siis
62. enable file sharing and click OK 4 In the Network sharing and security field select Share this folder on the network enter the share name and click OK Be cautious when selecting Allow network users to change my files since other net work users can change the files in the shared folder Caution The file and folder sharing configuration has been completed 4 24 Manual Mi Step 2 Using Shared Files or Folders This section describes how to access shared files or folders if your computer is a member of the same workgroup 1 Click Start gt My Computer Under Other Places click My Network Places in your computer 2 Click View workgroup computers and click the desired computer to access the shared file HED RH WAD LR TAD KAW we mee i ED Sy sah bers ne eae I CO e O panman r EER ei Bis ia RERE If your computer is a member of another workgroup 1 Click Other Places gt Microsoft Windows Network 2 Click the desired workgroup 3 Click the desired computer to display the shared files or folders Chapter 4 Connecting to the Internet 4 25 Sharing Printers This section describes how to share a printer between computers connected to a net work To share a printer complete the following procedures gt Step 1 Configure printer sharing in the computer connected to the printer gt Step 2 Add and use the shared printer in other computers on the net
63. erted at the beginning of the Storyboard iste em Se to a e ee tee Movie Editor lt a Title Tab a Ee 00e i00 FE z Applied Title Chapter 3 Using The Computer 3 25 3 26 Manual gt Screen Effect Select an effect from the Effect tab and drag and drop the selected effect onto the movie in the Storyboard to apply the effect gt Transition Select a Transition effect from the Transition tab and drag and drop the selected effect onto the movie in the Storyboard to apply the transition effect SS tee pa Movie Editor am f Select a Transition Effect and drag and drop it onto the position to insert the effect Position of the Transition Effect ie EES LEELLIEETA E Ef i a uy u H u u a ma uer Transition Tab gt Background Music Click on Music and select a music file to apply the background music to the movie file 4 When finishing editing a movie click on Create Movie and click OK to create the edited movie as a movie file The edited movie is saved in the My Documents gt AVStation pre mium gt Movie gt Edited Movie folder and will be displayed in the My Movie category Registering a File By registering multimedia files to the library you can easily access and manage them since they will be appear in the corresponding category of either the Music Image Movie categories on the left hand side of the screen The procedures to register an entire folder to th
64. etup information is displayed Confirm the settings and click the Next button 8 When the Printer Setting window appears click Finish For the printer setup procedures refer to Setting Up a Network on page 4 17 When the Shared Server setting is completed set up the shared client 4 20 Manual gt Setting Up the Sharing Client l Run Samsung Network Manager on the computer to be used as a sharing client Click the Add button Select a network location icon and enter the name of the location Click the Next button Select Internet Sharing and click the Next button Nl Re To connect through a wireless LAN select Internet Sharing Wireless Note Note To connect through a wired LAN select Internet Sharing Wired 5 Confirm the network device to be connected to the server and click the Next button To connect through a wireless LAN enter the wireless connection name e g Samsung you entered in the sharing server If you have set a network key security key for the sharing server enter the network key 6 The setup information appears Confirm the information and click the Next 7 button When the Printer Setting window appears click Finish For the printer setup procedures refer to Setting Up a Network on page 4 17 When the settings are completed you can use the Internet on the shared client To access the Internet from the sharing client the sharing server has to be on To use
65. ferent APs are using nearby channels interference may occur between electronic waves Set the APs channels further apart from each other Ex Chl Ch5 Ch9 Ch13 W hen an AP s SSID Service Set ID option is set to Hide you cannot search for that AP on the computer We recommend canceling the Hide option for an AP The SSID is a name for distinguishing one wireless LAN from another wireless LAN It is recommended using Long Preamble Preamble is a signal for data transmission synchronization Short Preamble may be supported by some types of APs but may cause compatibility problems It is recommended using a static IP Since static channel selection is more reliable than auto channel selection it is recommended setting a static channel Q5 In the Windows XP Available wireless networks window the Wireless Network Connection is displayed as Not Available Al When there is a Wireless LAN button ensure that the Wireless LAN button is turned on A2 Check if there is additional program for a wireless LAN connection installed W indows XP supports wireless LAN connections through the W ireless Zero Configuration W ZC service Therefore an additional program for wireless LAN connection is not required unless the network requires a specific program However installation of some wireless LAN related programs may sometimes disable the View Available W ireless N etworks window supported by W ZC service Exit th
66. files to the right Burn Audio CD window When you have added all music files click Next 6 Select a CD Writer and click on Start When the Burn CD window appears click OK to create the audio CD 3 20 Manual E Creating a Playlist A Playlist is a list of selected music files that has been created by a user so that the selected files can be played later 1 Select the music files to be included in the Playlist from the music category and click on Add 2 When you have added all the music files you want click on Save As Playlist 3 Register a new playlist name and click OK 4 When the completion message appears click OK The created playlist is saved in the C Program Files Samsung AVStation premium My Playlist folder NOTS Playing a Playlist gt 1 Click on Load Playlist at the bottom of the Library window 2 Select a Playlist and click OK to start the playback Chapter 3 Using The Computer 3 21 PHOTO This section describes the procedures to view pictures images to view pictures through a Slide Show to edit a picture to create an album and to burn an album onto a CD Click on PHOTO in the Menu Selection Bar Viewing and Editing a Picture 1 Double click on Image in the left category pane and double click on All Images 2 The image files are displayed in the right Image window To zoom in on an image double click the image file bod AW Shah promis MUSIC PHOTO Menu You can listen to t
67. function is not gt supported E To insert and use a memory card Caution Remove the Slot Protector first before using ethe Multi Card Slot _ Press the end of the Slot Protector lightly and remove the Slot Protector when it pops up w 1 Insert a memory card into the Multi Card Slot ii ex Memory Stick 2 Click Start gt My Computer The inserted memory card is displayed a Memory Stick Es ex Memory Stick Chapter 3 Using The Computer 3 9 3 10 Manual 3 You can write data to the memory card If the memory card is not format ted yet format the memory card before use Since the memory card may be easily mislaid when moving your computer keep the Caution memory card separately E To remove a memory card 1 Press the end of the memory card softly to pop it outward 2 Remove the memory card E To format a memory card You can use a memory card after the format operation The procedures to format a memory card are described below Since format operation deletes all data in the memory card please make sure that there is no important data in the memory card before formatting Caution Nore To protect the data in the memory card Set the write protection tab of the Memory Stick or SD memory card to the Lock position 1 Click Start gt My computer 2 Press the right touchpad button on the memory card drive and select Format from the pop up menu 3 Click Star
68. g EEEN mound hl AR Digitol Audio Wave FR o F ks of Hi OEM OREH Caution When you turn the system on a booting noise may occur Chapter 1 Getting Started 1 13 Using the Remote Control Using the remote control for the computer is described below To use the remote control install the supplied battery into the remote control first E Installing Battery Move the groove on the cover to the position by using a coin and open the battery cover To open the cover turn it counterclockwise Insert the battery so that the positive pole of the battery is towards the inside of the cover Move the groove on the cover to the position by using a coin and open the battery cover by turning it clockwise E Remote Control Buttons Power Button Press to turn the computer on or to enter Hibernation Playback Control Button Direction Button Press to move to an item BACK Button Press to return to the previous step MUTE Button Press to mute the sound Nore Remote Control Signal Transmitter AVStation Button When the computer is turned off or in Hibernation status AVStation now is launched P 3 32 When the computer is turned on AVStation premium is launched P 3 19 ENTER Button Press to execute the selected item Volume Control Button Buttons indicated by do not work in some applications e g Window Mode of AVStation pre
69. g Started 1 15 1 165 Manual This chapter provides basic information on using the computer s main operating system Windows 2 2 Manual An explanation will appear on the lower part of the screen Windows XP Basics Windows is the computer s main operating system which needs to be familiarized with in order for efficiently computer use Windows XP Tour A tour of the elementary functions provided by Windows XP Click Start gt Tour Windows XP Or click Start gt All Programs gt Accessories gt Tour Windows XP Click on the topics to find out about important functions of Windows XP Dee Semele hrie Csi Et mmp Tay TAD Mem E 20 je Daaa CaS Hanie ed wei o j pui i E TEF _ m Click the Title ae Windows meim eese eee j 1h Maiss IF AF Honam lamari Laplierei REER EA Fai EIP WED mp ate IAD MAE E Of O ga Dm wee 0 Oo Jno Rup Bere ekia h ben puk s gE eocecenced a E G mr ie Desktop Icons You can directly launch a program Start Menu Start Button Understanding the Desktop The Desktop is the working area on the computer It consists of the large workspace which is more or less the entire the screen and a Taskbar at the bottom PE BAM ZA E eee NHA a SE RTH gp ORUA PAZ rigo ai A maam D 5 Recycle Bin Language Bar Start Button Opens the Start Menu Displays programs that are currently running Ta
70. graphic not in text mode In this case a broken image may be displayed while changing the video mode settings Q4 In the following cases the screen blinks or displays noise for a short time Click the Graphics Related tab Change Resolution Change Display Device Remove the AC Adapter Restart the System Change PowerMizer level A This may happen while the video driver is examining the connected device W hile detecting any connected display devices may blink or some noise may occur Q5 When I connect a projector and change the setting to display screen image on both the LCD and the projector by pressing lt Fn gt lt gt keys screen is not displayed properly A Press lt Fn gt lt aic_ gt keys once again Q6 The desktop momentarily appears as a broken image when zooming in or out of the Media Player screen when Media Player is running A Since zooming in or out of the Media Player screen changes the screen resolu tion the desktop may momentarily appear as a broken image during this oper ation Q7 The playback screen of a DVD title or an MPEG file is only dis played on the LCD A Video is displayed on a single display device by default when LCD and CRT are selected simultaneously 1 Right click over the Desktop and select Properties from the pop up menu 2 In the Display Properties window select the Settings tab gt Advanced gt GeForce Go 6600 tab 3 Select the Full Screen Video menu gt Fu
71. gt To burn your own CD to see detailed information Enjoying Home Theater This product supports 5 1 channel output which is a basic function for home theater systems and DVD drives It provides 3D surround ing sound and vivid screen INOG Home theater system usually consists of a TV DVD 5 1 channel speaker and digital amp and provides a high resolution screen MPEG2 and 3D sur rounding sound Dolby 5 1 or DTS With a home theater system you can enjoy a vivid screen and sound in your home as if you are in a movie theater The following devices are required to enjoy a home theater system e 5 1 channel speaker system amplifier speakers connection cables Purchased separately e DVD drive and DVD playing program on the computer e DVD title that supports 5 1 channel Purchased separately E Step 1 Connect 5 1 channel speaker system to your computer 1 Connect the S PDIF jack of the system and a 5 1 channel amplifier 2 Connect speakers to the amplifier See the User Manual for the Speakers 3 To view through a TV connect the TV and change the current display device to TV in the Display Properties See P 6 8 Connecting to a TV Center speaker W Surround L speaker Surround R speaker Chapter 3 Using The Computer 3 7 E Step 2 Setting the Sound to Digital Sound Output on the Computer Since the sound of the computer is set to Digital Output by default when pur chasing the computer addition
72. he General tab of the Local Area Connection Properties window check that the connecting device field includes the Broadcom BCM 5788 Integrated driver 4 4 Manual 7 In the This connection uses the following items field select Internet Protocol TCP IP and click Properties RLS Pare FIE E er aR pore M Check the driver Bre TAT ig Gre fee Macro Hiivordki vat Fue and Perit Sharp for Hirmo Nebaren 7 Select Internet Protocol TCP IP n J Click Properties eer hogs ue a a E F a In the above screen necessary network components can be added by clicking the Install button Note 8 Enter the system s IP and DNS server addresses on the General tab of the Internet Protocol TCP IP Properties window If DHCP is used click Obtain an IP address automatically and Obtain DNS server address automatically on the General tab Internet Protocol ICPF AFE mE E ath nE ees Pa a HeT CL ae OF E Al pier te SARLA EAE IF Gr Re IF Se oy OER hi IP iat E TE DE A ED C ER FAR DHS ee mR IP addresses and other information necessary for configuration can be obtained from the network administrator Nore 9 Once all of the information is entered in the Internet Protocol TCP IP Properties window click OK to finish Chapter 4 Connecting to the Internet 4 9 4 6 Manual Using Both DHCP and Static IP Simultaneously When you are alte
73. he drivers and programs that need to be installed 3 Click OK The drivers and programs are automatically installed as factory defaults SAMSUNG 7 yp pm it om ERERARERE Pere Pees as va Microsoft Internet Explorer SORA S O RERREME O ET ERIE 4 When done restart the system Chapter 7 Recovering the Computer es 7 6 Manual Re Installing Windows W hen W indows is not operating properly due to an error on the hard disk drive you can easily reinstall W indows using the Samsung Recovery Solution Media Caution Please backup your hard disk drive Samsung Recovery Solution formats your hard disk drive before installing W indows Therefore please backup important data onto a separate storage device before reinstallation When using a partitioned hard disk drive gt If there is insufficient free disk space for installing W indows approximately e less than 5 GB Windows cannot be installed 1 Insert the Samsung Recovery Solution media into the DVD ROM drive and restart your computer 2 When the Press any key to boot from DVD message appears press any key on the keyboard After a while the Samsung Recovery Solution Start screen appears 3 Read the instructions on the Start screen and click the Start button to install W indows SAMSUNGA Ld m Jiii a i D r i lt SAMSUNG Recovery Solution Samsung Recovery Solution is a Windows clean I
74. he music files in My Playlist or All musics while editing an image Image Category Image Window Double Click An Image File To Zoom In on The Image Viewing the Image List Select View Image List from the menu at the bottom of the zoomed image screen Viewing an Image through the Slide Show or Full Screen Select Slide Show or Full Screen from the menu at the bottom of the zoomed in on image screen To exit SlideShow or Full Screen press the lt Ese gt key or right click and then select Exit SlideShow or Exit Full Screen Editing an Image 1 Select an image to edit and select the Edit Image tab 2 Edit the image using the Shape Edit Effect tool and click on Save or Save Copy 3 22 Manual E Creating an Album 1 Select the Create Album tab 2 Select an album cover style and click Apply to apply the selected style to the album cover 3 Enter the title and contents of the album insert an image and then click gt Move to next page To insert an image into an album cover select a file in the All Image pane on the left and then click the Insert button or double click the file to be inserted Geo AWS baflon prani AB eee A rote move owe torte Create Album Tab Photo eam Enter the Title and Contents of the Album gt Move to next page Button Slide Show Button f Save Button Insert Button 4 Create an album by adding images and image descriptions to the album 5 When creating an album is
75. headphones It is not supported through the S PDIF port Turns the wireless LAN service on and off for appropriate models Turns the touchpad function on and off You can select Etiquette Mode when you require a quiet operating environment 9 In low noise mode the operational speed of a pro Caution gt gram may be slowed down because the CPU operates at minimum speed and the system may overheat gt because the fan is rotating only at low speed Chapter 1 Getting Started 1 9 i Key Com Key Lae a ae Function gt binations Name f Num Lock Makes the keypad in the middle of keyboard available Scroll Lock Scrolls the screen up and down while the cursor position does not change in some applications a J Volume Up Increases the audio volume Caii Decreases the audio volume own te J ital Turns the LCD screen brighter ISAS ai l Turns the LCD screen dimmer Key Function a Screen Control Key oo Moves to the screen above or below or moves the cursor fo the beginning or end g g of the sentence j a Windows key Q Display start menu 5 Application Key Provides the right button function of the touchpad 1 10 Manual Status Indicators Shows the operating status of the computer in upper case Scroll Lock Icon Name Description Num Lock Turns on when the numeric keypad is activated Caps Lock Turns on when all alphabet characters
76. iles You can transfer files between Bluetooth devices such as computers mobile phones PDAs Personal Digital Assistant etc For more detailed procedures on transferring files refer to Send and ingle files to from a Bluetooth device of the Bluetooth On line elp gt Using the Internet via a mobile phone You can connect fo the Internet through your mobile phone after connecting it to a computer which is connected to the Internet For more detailed procedures on using the Internet refer to Install a Bluetooth mobile phone and Create a Bluetooth connection to the Internet using a Bluetooth mobile phone of the Bluetooth On line help gt Using a wireless keyboard and mouse You can use a wireless keyboard and mouse which have the Bluetooth function For more detailed procedures on using a wireless keyboard and mouse refer to Install a Bluetooth keyboard and Install a Bluetooth mouse of the Bluetooth On tne help gt Using a wireless printer You can use a wireless printer if the printer supports Bluetooth HCRP Hardcopy Cable Replacement Profile For more detailed procedures on using a wireless printer refer to Install a Bluetooth printer of the Bluetooth On line help Chapter 4 Connecting to the Internet 4 29 4 30 Manual gt Using a Personal Area Network You can exchange files between computers by connecting to the shared fold er of another computer via a Personal Area Network For more detailed procedures on us
77. ily Allow Pop ups or Always Allow Pop ups from This Site A3 To display popup windows from a particular site 1 Click on Internet O ptions in Start gt Control Panel gt Security Center gt Manage security settings for 2 In the Privacy tab of Internet Properties click on Settings from Block pop ups 3 Enter a URL to want to allow pop ups into Address of Web site to allow and click on Add 4 You will find that the entered address is added to the allowed sites list The next time you connect to the Web site you will see pop ups appearing W hen you need to re block a permitted site select the Web site address that you want to block from the Allowed Sites and click on Remove Q2 When you connect to a Web site you see the message To help protect your security Internet Explorer stopped this site from installing an ActiveX control on your computer or This site might require the following ActiveX control below the address bar A Windows XP SP2 blocks unsigned ActiveX controls from being installed when connected to certain Web sites for security reasons On some Web sites that have no ActiveX controls installed applications are not started or do not display properly In this case to install ActiveX controls right click the notification area to display a menu from which you can select Install ActiveX control Chapter 7 Recovering the Computer Q3 When you see a Windows Security Alert icon appear on the right part of th
78. information on possible problems solutions and other references for system use Windows Related Q1The system does not shutdown properly A When the system does not shutdown normally press and hold the Power button until the system manually shuts off If the Power Saving Mode is configured into the Power button press and hold for more than 4 seconds to shut the system off W hen the system is turned on after such manual shutdown Scandisk will run to check errors in the system Q2The system freezes during program operation Al There is an error with the program currently being used Press the lt Ctrl gt lt Alt gt and lt Delete gt keys simultaneously and click End Task in the W indows Task M anager window A2 There is an error with the W indows OS Reboot the system by using the Power button Chapter 7 Recovering the Computer 7 9 7 10 Manual Display Related Q1 The LCD screen is too dark or too bright A Adjust the LCD screen brightness Use the lt Fn gt lt t gt lt Fn gt lt gt keys Q2 The screen saver disturbs screen viewing during Media Player or video file operation A Unselect Tools gt O ption gt Player gt Allow screen saver during playback in the Media Player Q3 In DOS mode changing the full screen DOS mode by pressing lt ALT gt lt Enter gt key displays a broken image for a short period A The DOS mode which supports 2 Byte characters such as Korean and Japanese runs in
79. ing the Personal Area Network refer to Join a personal area network Provide a name for your computer on a personal area network and Bluetooth person al area networking overview of the Bluetooth On line help gt Sharing data with a Palm Hand held PC or a Pocket PC You can transfer data to and from a Palm Hand held PC or Pocket PC For more detailed procedures on sharing data refer to Installing a Palm handheld computer using Bluetooth technology and Installing 3 iia PC using Bluetooth technology of the Bluetooth On line elp E Precautions gt Please do not send files larger than 60MB when transferring files sue a File Transfer Function or Personal Area Network Sending a file larger than 60MB may fail due to an unstable Bluetooth connection gt When using the Personal Area Network function other computers may not appear in My Network Places If you cannot see other computers after 5 min utes click Start gt Search gt Computers or people and enter the name of a computer and search for it For procedures to view the name of your computer refer to Provide a name for your computer on a personal area network of the Bluetooth On line help This chapter provides information on efficient computer management Managing Power Use Power O ptions to save power consumption You can switch Standby Mode while you are not using your computer or configure the system components to shut it down on a specified time
80. ing to the configured computer I Right click on the Wireless Network Connection 4 icon on the taskbar and select View Available Wireless Networks Select the wireless network name e g samsung specified in Connecting to computer to computer networks peer to peer or ad hoc and click Connect HI SFIR ae BLT T ihe eaiie ag Gee ee gia toa A 2 ATTER Le TRAR Th J j emcee mil TES ee Sees le pE HANT jp TRENSA y BERANA gt LEURE 3 Enter a cryptographic key in the network key box and click Connect Note FE Sete sie WS WEP jak WPA soi aE ess 25S erate saat ieee DAR gt HA AE akkot GaSe Hehe ch i foo If the network key is not configured in Connecting to computer to computer networks peer to peer or ad hoc on P 4 9 just click Connect without any keystrokes W hen connected to the wireless network the system displays Connected in the selected network of the N etwork Connection window Nowe Checking the connection status Move the mouse pointer over the Wireless Network Connection 9 icon on the taskbar and the connection status is displayed ARMEER An VP EF 11 0 Mbps gt EWEEN HARB DiBiR Lh Poet Wireless Network Setup Using the Wireless LAN SetupProgram You can use a wireless LAN by using a wireless LAN configuration program PRO Set provided separately To use wireless network connection complete the following procedures
81. ion Now register the library in AVStation premium See Registering a File in AVStation premium gt HDD Category You can play unregistered files on the hard disk drive in the HDD category of each menu C drive is supported Mi Notice gt Do not remove the Recovery Solution Program Removing the Recovery Solution Program also removes AVStation Now Once the program is removed you cannot reinstall it therefore take care not to remove the program gt You cannot use an additionally created Playlist You cannot use an additionally created Playlist other than the Playlist provided with AVStation premium in AVStation now gt A movie file or a movie title not supported by AVStation Now To play a movie file or a movie title not supported by AVStation Now please use AVStation Premium after booting your computer gt For Cases where you cannot preview using the PHOTO MOVIE menu 1 When you did not create a Preview in AVStation Premium A Preview for a photo or a movie is created when you select the PHOTO MOVIE menu in AVStation Premium Full Screen Mode and view the preview in the Library pane 2 When the format of the photo or movie is not supported by AVStation premium 3 34 Manual Using Samsung Command Center Samsung Command Center is a program that enables the easy man agement of software provided for a Samsung computer You can view brief descriptions of some programs and you can launch the programs directly Sam
82. l screen of Play Mode 2 Double click All Movie from the left category and double click a video file in the right pane Pm MOVIE movita Category Window Library Window MUSIC You can listen to the music files in My Playlist or All musics while working Nore Playing a DVD Title 1 Insert a DVD title into the DVD drive 2 When the Select Work window appears select using Samsung AVStation premium and click OK to play the DVD title If the DVD is not automatically played or the DVD title was in the DVD drive double click the Title of the DVD in the DVD VCD category Playing a VCD Title 1 Insert a VCD title into the CD drive 2 Double click the Title of the VCD in the DVD VCD category Chapter 3 Using The Computer 3 29 Using AVStation now INlorS AVStation now is provided for some models AVStation now is an integrated multimedia program that allows you to watch video pictures video and movies and listen to music without booting into Windows Using AVStation now How to launch AVStation now and the AVStation features will be described below Note The use procedures of AVStation now are similar to those of Play Mode of AVStation premium AVStation now only supports the player and view functions To register files to the library use the registration function of AVStation premium E Launching AVStation now You can only use AVStation now when your computer is turned off or it is in ma
83. le Check the properties of the AP in the wireless network settings If the Use IEEE 802 1x authentication in this network option is selected deselect the option on the Authentication tab For more detailed information about authentication server ask your network administrator A3 If the AP is configured to Use network authentication Shared Key If the AP is configured to authentication shared mode all computers to be con nected should be configured as follows e If you are using W indows XP select network authentication shared mode in the wireless network settings Select Start gt Control Panel gt Network and Internet Connections gt N etwork Connections right click the W ireless N etwork Connection icon and then select View Available W ireless N etworks Select Change Advanced Settings from the left menu select an AP from Preferred networks window in the W ireless N etworks tab and click the Properties button Select Shared Mode in the N etwork Authentication field of the Association tab and then click the OK button If the Preferred networks window in the W ireless N etwork tab is empty click View W ireless N etworks select an AP to connect to and select Shared Mode in the N etwork Authentication field of the Connection Information tab as described above For more detailed network authentication procedures ask your AP Access Point administrator Q12 After PROSet is installed The AEGIS Protocol IEEE 802 1
84. ll Screen Video Control item set the Full Screen Device to Auxiliary Display and then click the Apply button Then you can view video on both the LCD and CRT display devices Q8 After connecting to a TV some programs such as Debug Mem etc do not run in full screen MS DOS mode A Ifa TV Is used as the display device some programs such as Debug Mem etc may not run properly in full screen MS DOS mode Run the programs in the MS DOS window Q9 Switching to full screen by pressing the lt Alt gt lt Enter gt keys while playing a music file using Media Player temporarily stops the sound A Zooming in or out of the Media Player screen changes the screen resolution The sound may stop while the screen resolution is switched Zoom in or out of the Media Player screen before playing an MP3 or MPEG file Q10 The Taskbar on the bottom of the screen does not appear when a projector is used as the display device A This may happen because while WXGA and W SXGA LCD support 1440x900 and 1680x1050 modes respectively the projector does not support these modes In this case change the resolution to 1024x768 recommended on your computer Q11 Switching the MS DOS command prompt to full screen mode or Windows mode by pressing the lt Alt gt lt Enter gt keys does not operate properly A Pressing the lt Alt gt lt Enter gt keys using an USB keyboard may cause the key input to be recognized as multiple key inputs depending on the
85. lled you will find a yellow exclamation mark on the network icon by clicking Start gt Control Panel gt Performance and Maintenance gt System gt Hardware tab gt Device Manager gt Network adapters gt Wireless LAN adapter If there is a yellow exclamation mark If a warning message apears install the driver again using the System Software Media A4 Referring to A2 of Q3 check that the network bridge configuration is correct Q2 The signal strength is excellent but cannot connect to the network Even if the signal strength is excellent the network connection may not operate properly if the TCP IP properties are not properly configured or the network key encryption key is incorrect Al Check that the TCP IP properties are configured properly W hen you connect to an AP click the Wireless Network Connection icon 4 on the taskbar and select the Support tab If the IP is not allocated properly the IP address will be displayed as follows e g 169 254 xxx xxx If the network does not provide DHCP you have to specify the correct IP address by asking your network administrator Even if the network provides DHCP the server may not allocate an IP address to the client properly and the client station cannot connect to the network A2 Referring to A2 of Q1 check that the network key is correct A3 Referring to Q4 check that AP is operating properly Q3 I cannot share an Internet connection Al It may require some
86. mium etc E Remote Control Operating Range The valid distance for the remote control is determined by the user environment It is recommended to use the remote control within 3 meters and a 45 degree angle from the remote control sensor on the device Nore 1 14 Manual When the remote control is not being used keep the remote control in the PCMCIA slot To keep the remote control in the slot insert the remote control into the slot so that the Remote Control Signal Transmitter faces outward Proper Seating Posture During Computer Use The proper seating posture during computer use is provided here Maintaining proper posture during computer use enhances performance and prevents physical bodily harm If o use a footrest to raise the level of your knees and ease the pressure on the thighs Seating Posture Position the chair so that the eyes are slightly higher than the display panel Straighten the neck and back Place the legs naturally If necessary use a cushion to provide extra back support Avoid working postures that require twisting the body or neck Lighting Soft indirect lighting is recommended Position the display panel so that external light does not reflect off the screen Use curtains if necessary Work Habits Take periodic breaks and stretch out stiff muscles regularly Look outside the window or at distant objects frequently to relieve strain on the eyes Chapter 1 Gettin
87. movie through your TV E Switching Display Devices Using the Shortcut Key You can watch the screen through either the LCD or an external display device or you can even watch the screen through both the LCD and an external display device simultaneously 1 Connect the external display device e g a monitor or a projector to the corre sponding port of the system To connect a TV connect the TV to the TV output port of the system lt gt Connecting to a TV To connect to a TV connect the TV Out port of the system and the S Video gt port of the TV with the S Video cable The cable is not included and needs to be purchased additionally Noirs 2 Press the lt Fn gt lt gt key Provided that an external display device is con nected the display option changes in LCD gt CRT gt LCD CRT order whenever the key is pressed Nore When multiple display devices are connected pressing the lt Fn gt lt o gt keys displays a picture on the LCD gt CRT gt TV gt DVI gt LCD CRT gt LCD TV gt LCD DVI gt LCD in this order In the MS DOS environment the picture is displayed to the LCD gt CRT in turns and output to a TV DVI is not supported In full screen MS DOS mode of Windows you cannot change the display device by pressing the shortcut key E Using Dual View to View an Extended Screen You can expand the screen into two display devices and work conveniently in separate workspaces In Dual
88. n an additional CD 1 Insert a blank CD into the CD RW drive 2 Click Open Writable CD Folder and click OK The CD ROM drive window appears automatically A A eee F E TEE A A A Peit DBT Loa ia we Em 3 Click Start gt My Computer Chapter 3 Using The Computer 3 5 2 Click Write Files to CD 3 6 Manual Nore Select drag and drop folders or files to copy onto the CD ROM drive window Click Write Files to CD in the CD ROM drive window Fak OOOO elles CD ROM drive window E D 2 pr Cmr m CES E G 1 Drag and drop folders or files to copy f areant o a suai ey Baly My Computer window J mannan sh BHO KAT RR IRZ Mel T G ARRAS Orr O F Ps EC OR gh MERN Th ae a Hae eee re fy Cinna A WRAL ETE g Ainus ka HAHA gt LH ad TANE rare Benge a 5 When the CD Write Wizard appears enter the CD label and click Next The data will begin copying 6 When copying is completed a completed message will appear and the CD ROM drive will open automatically For more information on copying CDs Click Start gt Help and Support Enter CD copy in the search field and click the Search button To Burn an Audio CD Run Windows Media Player and right click over the Function Taskbar and select Help gt Windows Media Player Help from the popup menu Select Using the Player gt Using CDs DVDs and VCDs gt Using CDs gt Burning your own CD
89. n on the remote control only works in AVStation premium Play Mode P 3 27 Using AVStation premium E AVStation premium Modes AVStation premium provides 2 modes Window and Play modes a a fn AV Sta ti on ATENT Window mode Screen Play Mode Screen gt Window mode You can use all AVStation premium functions gt Play Mode This provides an easier to use user interface than that of Standard mode In this mode the Edit Create function and the MOVIE EDITOR menu are not supported see P 3 25 Nore e This Manual mainly describes the procedures for using the Window mode of AVStation premium e The captured program screen shots in this manual may differ slightly from the actual software depending on the version of the program e For more detailed use procedures refer to the on line Help Chapter 3 Using The Computer 3 17 E AVStation premium Screen Layout and Menus The AVStation premium Window mode screen has the following layout C AVStation prone Menu Bar Gi mou MI ryore a mone moveron Menu Selection Bar AVStation premium Music Category Window WES Em Library Window AVStation premium Window mode consists of the following 4 menus gt MUSIC Using this menu you can play music files or audio CDs copy audio CDs to the computer as well as burn audio CDs gt PHOTO Using this menu you can view or edit pictures image view pictures through a Slide Show create an album and burn an album o
90. nce The click operation is also used to move the cursor during document operations E Double click Run Function Place a finger on the touchpad move the pointer on the screen to the item to run and quickly tap your finger on the touchpad twice Or double click the left touchpad button Chapter 1 Getting Started 1 7 E Drag Move Select Drag and drop a part to the required place This button is held down Place the touchpad pointer on the title bar of the window E Using the Touchpad Scroll Function The touchpad has a scroll function which can be used like the wheel dial of a wheel mouse Move up and down along the right edge of the touch pad scrolling up and down or left and right along the bottom edge of the touch pad scrolling left and right to scroll the screen However this may not apply to some programs 4 Ga uitiom Please use the touchpad only with your finger Using sharp devices may damage the touchpad Operating the touchpad or touchpad button while starting your system may increase the time required for starting Windows Nore To utilize the touchpad buttons for other more diverse functions please refer to the Mouse icon in the Control Panel 1 8 Manual Using the Keyboard Function Keys
91. necting the AC power This computer uses smart rechargeable Lithium lon Li lon battery Caution e Please read the instructions on the battery before use gt e Please refer to the system operation environment Page A 2 of this manual and e operate and store the battery at room temperature Ejectiing and Attaching Battery 1 Shutdown system and close LCD 2 Put the computer upside down 3 Pull the two battery latches outward cf then remove the battery battery latch 4 To install the battery again slide the battery into the system as below The battery latch moves inward and fixes the battery automatically 5 4 Manual Monitoring the Battery Charge You can view the battery charge status by completing the following procedures E Using the shortcut key to view Press the lt fn gt lt gt gt key combination on the keyboard and then the current power source and the current remaining battery charge are displayed at the top left of the screen E To view on the battery Click the PUSH button on the battery The remaining battery charge will be displayed Slightly press PUSH button E To view through the Control Panel Select Start gt Control Panel gt Performance and Maintenance gt Power O ption gt Power Measure tab Then you can view the current power source and the current remaining battery charge L A eee o Power supply status Remaining Battery Charge ARMEE ASERT
92. ng an optimized power mode and manually optimizing the battery use time by setting each option Click on Start gt All Programs gt Samsung gt Samsung Battery Manager gt Samsung Battery Manager Samsung Battery Manager t E Select the Power Mode Asi fE FAHRE D ES AAA P Lop ARSA ARER ERR ei em papaRiange ae Esl gt abs gt RA RAWERE fe mase o pae PREA f eae o gt Colorbit C c b Fert trER f i mae v gt EF C c DBD Sash gt Maximum Battery Saving Mode This mode is appropriate for cond tions which require the maximum battery use time This may degrade the performance of the system gt Normal Mode This mode is appropriate for normal conditions Both system performance and battery use time are optimized gt Maximum Performance Mode This mode is appropriate for conditions that require maximum system performance Therefore the battery usage time may be reduced in this mode gt Custom Mode In this mode a user can configure a detailed configuration to save the battery usagetime You can adjust the LCD brightness the system standby time the screen color quality and the graphic mode values NOTS Power Saving Effect This shows the relative battery use time for each power mode The more effective the power saving the longer the graph will appear When Running a Game or Multimedia Application A game or multimedia application may not work smoothly in Maximum
93. nstallation tool After Windows installation applications and drivers l should be installed additionally via System Software CD or System Software Media Please backup any important data before running All data will be lost after the Installation If you wish to backup your data press Cancel now and exit 4 The Windows installation will be performed Installation will take approximately 15 20 minutes depending on the performance of the computer SAMSUNG SS ad Windows installation in progress Do NOT turn off the system UA Installation will take approximately 15 20 minutes depending on the system performance Nowe If the Select Windows version language screen appears instead of the Windows installation screen The Select Windows version screen may appear if you have formatted your hard disk drive Selecta Windows version according to the following procedures 4 1 Select the Windows version you have used and click the Start button You have a choice of two Windows versions Select the Windows version you wish to install and press Start Please be aware that the remaining version will be deleted permanently 4 2 The Confirmation window appears Confirm the selected W indows version and click the Yes button Chapter 7 Recovering the Computer 7 7 7 8 Manual 5 When the W indows installation is complete the computer will automatically restart and the Notice window will appear Insert the System
94. nto a CD gt MOVIE Using this menu you can play a video movie file or a DVD VCD title You can only play a DVD title after installing Power DVD or a DVD player program gt MOVIE EDITOR Using this menu you can edit a movie file Note e To handle multimedia files conveniently register the multimedia files to the library See P 3 26 Registering a File e To access a file not registered to the library select File gt Open File and select the file E Selecting the AVStation premium Menus To select a menu select the required menu from the Menu Selection Bar 3 18 Manual MUSIC This section describes the procedures to play music files or audio CDs to copy audio CDs to the computer as well as burn audio CDs Select MUSIC from the Menu Selection Bar E Playing a Music File Geo AW Sib lo0 prani 7 MUSIC Menu Music Category AVStation premium Music Media Play Control Button ae stale ee Repeat Button Track All Tracks Random ee Dympiisp ii o hnm y igr bah liper Bar Library Window Add Music 1 Double click Music in the left category pane and double click on All musics 2 Double click the music file that appears at the bottom screen to play it To play multiple music files select the music files and click on Add The music files will be played in the added order E Playing an Audio CD 1 Insert an audio CD into the CD ROM drive 2 When the Audio CD window
95. number of colors on your screen 1 Select Start gt Control Panel gt Appearance and Themes gt Change the screen resolution 2 Make changes on the Settings tab of the Display Properties dialog 28 Am Se PEA iam Eee RT ey Eel Bae You can view the graphics chipset ENEG Beam i To change the number of colors displayed on a monitor select an appropriate color quality Ce aaw wt ma ew To change your screen resolution move the slider to select an appropriate resolution INIOFS Graphics Chipset Information You can view the installed graphics chipset in the Display Properties window NVIDIA Geforce Go 6600 NV43M 3 When you have completed configuration click Apply Nore The following resolution and color quality settings are recommended depend ing on the LCD screen of the system WXGA 17 Screen resolution 1440 x 900 Color quality Very high 32bit WSXGA 17 Screen resolution 1680 x 1050 Color quality Very high 32bit Chapter 6 Customizing your computer 6 7 6 8 Manual Using External Display Devices Using external display devices such as a monitor projector TV etc allows you to view screen images alternatively or simultaneously on each device Additionally you can extend the screen onto two display devices to use a larger workspace Using external display devices is especially useful when you are giving a presentation or watching a
96. ocument This chapter investigates various different functions of the computer and provides information on using the related application programs for them Using the CD ROM Drive This computer has one of the following CD drives CD RW DVD ROM Read a CD DVD and writes data onto a CD Combo Drive DVD Super Multi Drive Reads CD DVDs and writes data to CD DVDs Supported DVD types include DVD R DVD RW and DVD RAM Note A CD ROM drive is optional For more detailed product specifications refer to the e product catalog 1 Press the eject button on right side of the CD drive Status Indicator 3 Push the CD tray in gently The CD will run automatically INJ PQ To eject a CD when the CD drive is out of order or the system is turned off unfold gt a paper clip and insert the unfolded end of the clip into the hole and press until the CD tray opens Ge UROW 2 To clean a CD or DVD title clean the disc with a soft clean cloth by wiping from the gt center outwards Do not eject the CD while the Status Indicator is on 3 2 Manual Using the Windows Media Player Window Media Player enables you to play and manage audio and video files Click Start gt Windows Media Player Or click Start gt All Programs gt Accessories gt Entertainment gt Windows Media Player Running the program the first time displays the set up screen Define the settings according to the instructions displayed
97. on the user Do not use loose power outlets or damaged power cables There is a danger of electric shocks or fires Set up the system in a clean dry and airy place If the system overheats it may be damaged or it may cause fires Use standard power voltage High voltage may result in product damage or cause fires Use grounded power outlets designed for computers A grounded power outlet prevents electric shock from electricity leakage Set up the system away from magnetic objects Contents of the hard disk drive may be deleted or the color of the monitor may be permanently distorted Dispose of moisture reducing agents and plastic packaging properly Consumption of moisture reducing agents and placing plastic packaging over the head is fatal especially for children A 6 Manual Instructions for careful handling Handle with care so as not to damage the data in the hard disk Since the hard disk is fragile and sensitive to external conditions it may be damaged from temperature changes or impact during operation Take extra care to prevent such damages Loss of data due to external conditions or carelessness during use is the user s sole responsibility and the manufacturer shall not be held liable for any com pensation In order to minimize damages from data loss please backup data at all times Cases when the hard disk and data may be damaged External impacts while separating from or inst
98. r try again after a while Chapter 4 Connecting to the Internet 4 27 4 28 Manual 7 Read the warning about a shared printer and click Yes to install the shared printer 8 Select Yes for Do you want to use this printer as a default printer and click Next 9 Click Finish 10 When the printer sharing configuration has been completed the shared printer appears in the Printers and Faxes window E PEt TAD GH PRO ANEW TAD Rea 2 Om jwr POEL Oa EORTC 7 ee E Henga oe it al 9 MIC 1910 Series hth ithe HYPI A ERATE a TIRRAN A Now you con print using the shared printer even if your computer is not directly con nected to a printer Using Bluetooth Devices optional You can transfer files between Bluetooth devices use the Internet and con struct a Personal Area Network In addition you can use a wireless key board wireless mouse and a wireless printer that have the Bluetooth func tion Nore You can only use the Bluetooth communication function between devices comput ers mobile phones PDAs printers etc which support Bluetooth Bluetooth Device On line Help For more detailed procedures on using the Bluetooth function click Start gt Help and Support gt Network and the Web gt Networking gt Wireless networking gt Bluetooth devices and view the descriptions E The following functions are provided by the Bluetooth software gt Transferring f
99. r Select Sub Menu F10 Save and Exit 3 Enter a password press lt Enter gt re enter the password for confirmation and press lt Enter gt again Set Supervisor Password Enter New Password Confirm New Password 4 When a message confirming the password configuration appears in the Setup Notice window press lt Enter gt 6 4 Manual i Setting the User Password You can configure user passwords so that other users can use the system Note Before configuring a user password a supervisor password must have been con figured Users can start the system with their user password but cannot enter into the System Setup Deactivating the supervisor password also deactivates the user password On the Set User Password item press lt Enter gt and complete step 3 4 of Configuring the Supervisor Password E Activating the Booting Password INJOP2Q Before activating the booting password the supervisor password must have been configured Set the Password on boot option to Enabled From now on you must enter the password to boot the system i Deactivating the Password 1 On the password to delete press lt Enter gt e g supervisor password Enter the current configured password and press lt Enter gt Leave the New Password and Confirm New Password field empty and press lt Enter gt to deactivate the password Chapter 6 Customizing your computer 6 5 Changing Booting
100. ram operation Chapter 7 Recovering the Computer 7 19 7 20 Manual Q9 The network does not operate properly when both the wireless and the wired network connections are simultaneously configured with the same IP address A You cannot use the wireless and the wired network connections using the same IP address simultaneously To use either the wireless or the wired network in turn with the same IP address you have to Disable whichever network device will not be using in the network connection of the Control Panel Q10 The wireless LAN does not work properly when there is a device operating on an adjacent frequency in the vicinity of the product Al Channel interference may occur when a wireless video transceiver or a microwave oven is being used If you experience channel interference from other equipment it is recommended changing the channel to connect to the AP For more information about AP settings refer to the User Manual supplied by the AP manufacturer A2 IEEE802 11g equipment operates in hybrid mode when there is active IEEE802 11b equipment This may result in data rate degradation Q11 An established wireless LAN connection is disconnected after 2 3 minutes and the connection is not recovered Al This may be caused by channel interference Change the channel of the AP and reconnect A2 This may be caused by selecting the Use IEEE 802 1x network authentication option when IEEE 802 1x authentication is not availab
101. rd through the PCMCIA card slot of the system Chapter 3 Using The Computer 3 11 3 12 Manual Using EasyBox Use EasyBox program to make use of Windows complicated function easily andconveniently Learn about EasyBox Double click the EasyBox 33 icon on the desktop Or select Start gt All Programs gt Samsung gt EasyBox gt EasyBox amp easy 50x ESES FER BIOS Wi Bitar f EASY BOX EASY BOX RAER Windows PAVER IOR DUER PAE eae MEERA Windows Copyright 2004 SAMSUNG ELECTRONICS CO LTD gt System System management features are available including disk defrag menter removing unnecessary files folders computer scheduling and system recovery gt BIOS _ In windows based mode you can recover the BIOS defaults and change the boot sequence gt Desktop Desktop management features include changing the font size execut ing a magnifier function the start menu settings and managing the quick launch icons on the taskbar gt Security Here you can configure the security settings supported by Windows XP SP2 You can also change the configuration of the firewall set tings Windows automatic updates and blocking pop ups when con nected to the Internet gt Plus Tip This is a collection of additional Windows functions that are useful for system management Offering shortcut descriptions of Windows configuring network sharing and opening local folder sharing etc
102. rnatively using networks with either DHCP or static IP address ing you can use alternative settings that enable simultaneous configurations of DHCP and static IP to use both of the network connections without reconfiguring INlofS This function is provided only when your operating system is Windows XP 1 Click Start gt Control Panel gt Network and Internet Connections gt Network Connections gt Local Area Connection press the right button of the touchpad and then select Properties 2 Select the Internet Protocol TCP IP item and then click Properties 3 In the Alternate Configuration tab click User configured and then enter the appropriate values for the following IP address Subnet mask Default gateway Preferred and alternate DNS server Preferred and alternate WINS server Internet Protocol TCP IP PATE EA E MERE MR SRS ea tA E EFRA Rih PEY O ERRA FEHI SPME TE IF ED 124 123 123 10 THESU 755756 955 HEMT 123 123 123 1 WA DHS REE 123 123 133 2 Sih DHE RA 123 123 123 WH WIN Ree 123 122 1 4 ih wis BD 129 193 1235 5 4 When the configuration has been completed click OK Now you can connect to both networks using DHCP and static IP respectively Configuring the Network Environment Settings for Wireless LAN Network wian A wireless network W ireless LAN environment is a network environment that enables communication between multiple computers at home or a small siz
103. s LAN When the wireless LAN is enabled the Wireless LAN Operation LED gt lights up Run Samsung Network Manager Select Start gt All Programs gt Samsung gt Samsung Network Manager gt Samsung Network Manager or double click the Samsung Network Manager 1P icon on the Desktop Click the Add button Select a network location icon and enter the name of the location e g Home Click the Next button 5 Select Internet direct connection and click the Next button amie 2 FFARR Cams BAER EGTA gt e a tk Fo 6 Select the LAN device setup the IP address and click the Next button 3 RESBESH IP t it EHRE ERA IP Select Device Note 7 Amet IP iit Setup IP Address IP tth Mee 7z oo o o XSONSM RMBlo 5 0o o PES ie e Select Device Select a device to be connected to the Internet Select either Wired LAN or Wireless LAN Setting up the IP Address To allocate an IP address automatically DHCP select Get IP Automatically To use a static IP address unselect Get IP Automatically and enter an IP address For IP address information ask your network administrator 7 When the Printer Setting window appears click Finish To add a printer click Add Printer The Add Printer Wizard appears Set up the printer according to the instructions displayed on the screen When the printer has been added click the Show printer button select the newly added printer and
104. side of the screen Note System Setup Navigation Keys Moves upand Changes the Displays the down between value ofthe Restores Help window fields current field default values Help Select Item Change Values Setup Defaults C Exit Select Menu Select gt Sub Menu F10 Save and Exit Exits the current Moves between Selects a field Saves changes sub menu or menus or opensa sub and exits opens the Exit menu System Setup menu N OS Contents of System Setup may be changed due to functional improvement or other reasons Chapter 6 Customizing your computer 6 3 Configuring the Password i Setting the Supervisor Password By configuring a supervisor password you can restrict system access to autho rized users only INJOFS Do not lose or forget your password If you have forgotten your password contact the Samsung service center 1 Select the Security menu in the System Setup To enter into System Setup see Page 6 2 2 On the Set Supervisor Password item press lt Enter gt PhoenixBIOS Setup Utility Main Advanced Security E Boot Exit Supervisor Password Clear Item Specific Help User Password Clear Supervisor Password Set Supervisor Password Enter controls access to the setup utility Set User Password Enter Password on Boot Disabled Fixed Disk Boot Sector Normal Fi Help tL Select Item F5 F6 Change Values F9 Setup Defaults Esc Exit Select Menu Ente
105. skbar Frequently used icons can be placed here Recycle Bin Deleted files or folders end up here Enables switching between English other languages Language Bar ee oe text inputs and provides other text input services Chapter 2 Introducing Windows 2 3 Understanding the Start Menu The Start Menu includes everything that is required to start Windows From the Start Menu it is possible to run a program open a file assign system users with the Control Panel receive support by clicking Help and Support and search desired items from computer or Internet by clicking Search al SAMSUNG l RIZA This Folder Stores Fixed Items smin gt Personal Documents Internet Browser O Ribas Electronic Mail Program p Wondows Madia Flaver e EDER PELT My Computer 3S Winlows Mese A Winters Mee G mo Control Panel List of Programs Last Used 28 iion ze ERENS The program item and location T AeA may be changed y BAREM EE 2 32 _ Help and Support Heg I ATE Includes All Programs CETE Click This Button to View the Start Menu Displays the contents of the hard disk the CD ROM drive the network drive and floppy disks It can also be used to search and open files and folders My Computer Control Panel 2 Enables users to configure settings on the computer Help and Support o Provides on line help information on Windows W and troubleshooting
106. stem Data encryption WEP The IEEE 802 11 WEP Wired Equivalent Privacy standard defines two levels of encryption a 64 bit key this is sometimes represented by 40bits and a 128 bit key Key index Select the current encryption key index used by the access point out of 1 to 4 To use encryption key Click Use pass phrase to activate and enter 5 for 64 bit 13 for 128 bit alphanumeric characters represented by 0 9 a z or A Z 6 The Done window appears click OK W hen a wireless connection to an access point is established connection icon 1 appears in front of the name of connected profile 4 14 Manual To create a computer to computer Ad Hoc network To create a new computer to computer Ad Hoc network or to connect to a hidden access point Stealth Closed Mode refer to the following procedures Nowe e A hidden access point is an access point that exists but is configured not to be detected by the scan operation to prevent access attempts from unauthorized gt users 1 In Profiles click on Add 2 Enter Profile Name and Network name SSID select Operating Mode then click Next ANIOS What is a network name SSID N etwork name SSID is a name that a wireless adapter uses for identifying connection Enter the name of computer to computer network to create e g Samsung or the name of access point to connect The network name identifies cases capital and lowercase For the name of a
107. sung Command Center is always hidden automatically and it appears when you place the mouse cursor in the right most position Select Start gt All Programs gt Samsung gt Samsung Command Center gt Samsung Command Center The Samsung Command Center screen consists of the following 4 areas Clock SW Group Area W k a SW List Area J AV Station Area Samsung Update Plus Area gt S W Group Area You con classify programs into 5 groups these being System Utility Network Support and Entertainment and manage them You can add a file that can be launched directly from the Desktop or Explorer Files that have the extension of cmd bat pif scf exe com Ink or scr by dragging and dropping them Chapter 3 Using The Computer 3 35 3 36 Manual gt S W List Area Shows software included in the S W group You can add a file that can be launched directly from the Desktop or Explorer by dragging and dropping it Some Samsung software is automatically added or removed from the list when the software is installed or removed If you move the cursor over the software in the list you can view a brief description and the Run button to launch gt AV Station Area This only appears when the AV Station program has been installed You can easily launch the TV music movie or album player of the AV Station program Drag and drop a media file from the Desktop or Explorer over any of the buttons
108. t to start the format operation Caution To use a memory card in both the computer and other digital device such as digital lt camera it is recommended to format the memory card in the digital device If you for mat the memory card in the computer you may have to format the memory card in other digital device again to use the memory card in the digital device Using the PCMCIA Card Slot Various different functions can be added by inserting PCMCIA cards into the system This system supports 16 32 bit type or Il PCMCIA card types Gauiion Before using the PCMCIA slot remove the slot protector Push the eject button of the PCMCIA card slot once a gt fo pop it out Push the button again to eject the slot protector 1 Insert a card into the PCMCIA card slot on the side of the system uh 2 When a card is inserted Windows automatically installs the necessary driver for the card If no available driver can be found by Windows the driver has to be installed using the disk supplied with the card To remove PCMCIA card a Double click Safely Remove Hardware icon E in Taskbar b Select the appropriate PCMCIA card and click Stop button c When Safe to remove Hardware window appears click OK gt d Press Eject button at PCMCIA card slot once then the button pops out lt e Press the projected button to eject the PCMCIA card Nore Ge uiioOW 2 You cannot use a ZV card and a PCMCIA III ca
109. tained please back up all necessary files to another location before performing NEFER gt LAREN meets FF Crs mo system recovery 3 Select the desired restore date from pissas the Ca lendar resto ra tion a nd select the FFA ARSE TPT AS RAAR gt EE PRAT PEAY RAP SPO AS RA desired restore point from the list cata vena emesen sear and then click Next lt i 20037238 mae T 02 06 46 test AIORS The date of the restore point is displayed in bold font L lt ta L_Feem gt _ BRO 4 Confirm the selected restore point and click Next System Restore shuts down W indows and starts the restoration processes 5 After the restoration is complete W indows restarts In the System Restore completed dialog box click OK Your computer has been restored to the selected restore point Mi Undoing the last restoration The procedures to undo a restoration are described below 1 Click Start gt All Programs gt Accessories gt System Tools gt System Restore 2 Select Undo my last restoration and click Next 3 Confirm the restoration information to undo and click Next System Restore shuts down W indows and starts undoing the restoration 4 After the undo restoration is complete W indows restarts On the Undo the last restoration completed dialog box click OK Your computer has been restored to the point prior to the last restoration
110. then click the Finish button Nore To not add a printer select No Default Printer and then click the Finish button When the network setting is complete the Do you want to move to newly added location now message appears If you select Yes the network settings for the added location are applied When the network settings for the added location are applied the added place and the corresponding network connection information is displayed in The detailed Information for window Chapter 4 Connecting to the Internet 4 17 4 18 Manual When the network setting is complete an icon for the added location is created within the Saved Locations window Now you can use the Internet or add a new network location I SAMSUNG Network Manager Menu Current Place Information Nore Saved Locations Wireless LAN AP Connection Procedures To use a wireless LAN first connect to a wireless LAN AP and then you can access the network even when moving location Or moving location and then you can access the network even when connecting to a wireless LAN AP 1 Right click over the Wireless Network Connection E icon on the Taskbar and click View Available Wireless Networks 2 Select an available wireless network e g SAMSUNG and click the Connect button For information on available wireless LAN APs ask your network administrator O RFE BT LB ee i d E 2 ISTAN E at imiEh ipay SAMSUNG maritima aS
111. through the Control Panel 1 Click Start gt Control Panel gt Network and Internet Connections 2 Under See Also click Phone and Modem Options 3 In the Modems tab select the installed modem and click Properties 4 In the Modem tab of the Modem Properties window clear the Wait for dial tone before dialing check box 5 When the configuration is completed click OK Q3 How do I use my modem when dialing from overseas Al Check that the modem Is correctly configured according to the current country Because the values for communication may differ according to the country you may not be able to connect via the modem due to an incorrect modem configura tion 1 Click Start gt Control Panel gt Network and Internet Connections 2 Under See Also click Phone and Modem Options 3 In the Dialing Rules tab click Edit 4 In the General tab in the Edit Location window select the current country from the Country region radio box specify the Area code and click OK A2 Because the shape of the telephone plug may differ according to the country you have to purchase and use the appropriate telephone plug for that particular country Q4 How do I receive a fax while the system is in power saving mode Rest mode For Windows XP and 2000 A To receive a fax when the system is in power saving mode and the operating sys tem is W indows XP or 2000 configure the system as follows 1 The automatic fax reception func
112. time Diagnostic Screen Disabled PXE OPROM Only with F12 Brightness Mode Control Auto Smart Battery Calibration Fi Help tL Select Item F5 F6 Change Values F9 Setup Defaults Esc Exit Select Menu Enter Select Sub Menu F10 Save and Exit 4 When the calibration process is complete and the battery is completely discharged connect the AC power adaptor to fully recharge the battery Chapter 5 System Management 5 7 Upgrading Memory This computer has one or more 256 MB or 512 MB memory module s Two memory module sockets are provided so that you can replace memory or install an additional memory module Now Before replacing the memory module turn the system off completely and remove the battery Do not replace the memory module when the system is in Rest Mode 1 Using a screwdriver open the memory module compartment cover on the bottom of the system battery screw 2 Push the memory module tabs outward to pop the memory module outward Pull the module out at an angle of about 30 3 Align the new memory module connectors accordingly and slide it into the slot at a 30 angle 5 8 Manual Push the memory module in until the module clicks into place If the memory module is not fixed completely push the module while pressing the memory module tabs outward Close and fix the memory module compartment cover using a screwdriver Chapter 5 System Management 5 9 Using the Security Lock
113. tion of the fax program needs to be activated For more information refer to the corresponding fax program manual Click Start gt Control Panel gt Network and Internet Connections Under See Also click Phone and Modem Options In the Modems tab select the installed modem and click Properties In the Power Management tab of the Modem Properties window select the W ith this device exit the computer from stand by mode item and then click OK ul A W N The above setting enables the modem to turn on the system and receive a fax when in power saving mode Wired LAN Related Q1 lt Wake On LAN gt Function A lt Wake On LAN gt is a function that activates the system in rest mode when a sig nal such as ping or magic packet commands arrives from network wired LAN gt To use lt Wake On LAN gt function 1 Select My Network Environment gt View Network Connections from the Desktop 2 Click the right button on the touchpad over Local Area Connection and select Properties 3 Click Configure and select Power Management tab Select Allow this device to bring the computer out of standby then click OK Restart the system e If the system in rest mode is activated when there is no received signal use the system after disabling lt W ake On LAN gt function e Connecting wired LAN while using wireless LAN may not execute lt W ake On LAN gt function Configure wireless LAN to Disable to
114. to computer network Al Make sure that the security settings and network name of the computer to com puter Ad Hoc network is correct A2 Check the TCP IP properties of the computers to be connected through the com puter to computer Ad Hoc network All of the computers to be connected through a computer to computer Ad Hoc network should be configured so that their IP addresses are within the same subnet range e If the TCP IP Settings are configured to DHCP the address is automatically configured to an address within the subnet IP range This will take about 2 3 minutes e f the IP address is configured to static IP in TCP IP properties select Use the following IP address in the TCP IP properties of the wireless adapter configure IP address 10 0 0 1 10 0 0 254 and Subnet mask 255 255 255 0 and then try again e A fixed IP is recommended for a small size network Q7 When using a computer to computer Ad Hoc network sometimes cannot search the access point A Itmay happen occasionally when you are using a computer to computer Ad Hoc network connection Even if you cannot find some access points the computer to computer Ad Hoc network is operating properly Click Refresh to view the latest search result Q8 Running Help file while running Profile Wizard in the wireless LAN program PROSet makes the PROSet window white A It will be displayed properly when you finish the profile wizard It dose not affect the prog
115. to use the network This is possible only in an environ ment equipped with an AP See P 4 8 Connecting to an Access Point AP NOVa Whatis an Access Point AP An AP is a network device that bridges wired and wireless LANs and corresponds to a wireless hub in a wired network You can connect multiple wireless LAN installed computers to an AP 2 Computer to computer ad hoc This is also called a peer to peer network In computer to computer wireless networks you can wirelessly connect 2 or more computers that have wireless LAN modules See P 4 9 Connecting to computer to computer networks peer to peer or ad hoc Chapter 4 Connecting to the Internet 4 7 4 8 Manual Connecting to an Access Point ap This section describes how to connect to an AP You can use the network when you are connected to an AP Now gt For more detailed information such as the network key encryption key ask your network administrator 1 Right click on the Wireless Network Connection icon on the taskbar and select View Available Wireless Networks at TAY Windows RAUBER TEIE C paR ER ize Select an AP E g Test to connect to and click Connect If there is a configured network key for the AP to connect to the Enter N etwork Key window appears Enter the Network Key in the window and then click the Connect button Eg o are eecee zans Note 2 IFNA
116. ton Antivirus Even when you have installed Norton AntiVirus on your computer W indows cannot recognize the program until you configure the settings displaying a Security Alert icon W hen you first use or install N orton AntiVirus for the first time follow the Registration W izard steps to configure the registration settings To protect your computer from virus attacks with the latest updates click on Options to display the Norton AntiVirus O ptions window From the left menu of the window check Run Automatic Protection to select Automatic Protection and check Run LiveUpdate to select LiveUpdate A4 Two virus scanning programs on one computer may cause system conflicts Remove one of the programs from the system 7 26 Manual A5 If Windows does not recognize the existence of an anti virus program even when it has been installed your computer could be vulnerable to attacks from the Internet You should install an anti virus program that your computer is able to identify Check the following programs which W indows can detect and select one from the list A list of anti virus programs that W indows can detect e Symantec N orton Anti Virus e NetworkAssociates M cA fee e TrendMicro e ComputerA ssociates e Panda e Kaspersky e Ahnlabs AhnLab AIOS The list is subject to change Visit the Microsoft Web site www microsoft com regularly to check the latest list Chapter 7 Recovering the Computer 7 27 7 28 Manual See
117. tus onto the hard disk and turns the computer off Pressing the Power button restores the computer to the previous working status Nowe Press Power button to use computer again in Standby Mode or Hibernation M ode You can also reserve Turning Computer O ff Maximum Power Saving Mode Hold Mode etc by selecting System gt Computer Scheduling in the EasyBox program See P 3 12 If you change the power settings in the Battery Manager program the settings of the Power O ptions Properties window are automatically changed accordingly see P 5 6 5 2 Manual Using the Power button You can configure the function of the power button Click Start gt Control Panel gt Performance and Maintenance gt Power Options and select the Advanced tab Bris Sr annas SRB e EA HES SANGSRE 18 DC Babe Lite Lares METARA ERMA EEO Bie SE LABS ees N TETEE ERISTEEN E SHE T EINER D Gi v ERRERTE iw Vv Caution Configure the Power button function i Configuring the function of the lt fn gt lt 2 gt key combination W hen the Power button is configured to put the system into Power Saving Mode manually shutting down the computer requires the Power button to be pressed and lt held for more than 4 seconds Chapter 5 System Management 5 3 Using the Battery Please refer to the following instructions when running the computer on battery power without con
118. ure properly when the screen resolution is set to 1024x768 and the color quality is set to 32 bit For these games set the screen resolution to 1024x768 and the color quality to 16 bit Chapter 7 Recovering the Computer 7 23 Q12 Game play is not displayed smoothly on the screen A For 3D games the texture data for the 3D screen display is saved to the system memory If there is insufficient system memory the data is saved to the hard disk drive and loaded to memory when required This operation may temporarily stop displaying the picture on the screen In this case lower the game resolution or the screen settings For Delta Force Black Hawk Down Medal of Honor Battle Field 1942 etc 7 24 Manual Security Center Q1 To change the popup window display settings when connected to the Internet In the W indows XP SP2 environment you can decide whether to display a popup window when connected to the Internet for user convenience and security Al To display most of the popup windows when connected to the Internet 1 Click on Internet O ptions in Start gt Control Panel gt Security Center gt Manage security settings for 2 In the Privacy tab of Internet Properties clear Block pop ups A2 To display popup windows only from the current site when connected to the Internet Place the cursor on the notification area at the bottom of the Internet address bar and right click to display a menu from which you can select Temporar
119. ustody 5 40 C for operation 10 32 C Humidity for custody 5 90 for operation 20 80 100 240VAC 50 60Hz 90W 19 0 VDC The system specifications are subject to change without notice For detailed system specifications refer to the product catalog Wireless LAN Specifications optional Intel R PRO Wireless 2200BG Network Connection Item Specifications Physical Dimensions 59 75 X 44 45 mm Width X Height Specifications operation temperature Same as system operation specifications and humidity Temperature O 70 C Humidity less than 85 Power Saving Mode 135mW Power Receiving Mode 0 85W Specification Transmission Mode 1 45W Power 3 3V Compatibility IEEE 802 11g IEEE 802 11b Operating System Microsoft Windows XP Network NDIS5 Miniport Driver Specifications Media Access Protocol CSMA CA Collision Avoidance with Acknowledgement ACK Security Wired Equivalent Privacy support WEP 64bit 128bit WPA CCX This piece of equipment supports the Wi Fi wireless LAN security standard WPA Wi Fi Protected Access and CCX Cisco Compatible eXtensions To connect to a wireless network consisting of the WPA and CCX 1 2 2 8 or higher version of wireless LAN driver have to be installed on your computer and certificates or PROSet may be required depending on the network settings For driver update visit www samsung com and for information on the PROSet installation refer to P 4 13
120. ver 2 Click the Add button 3 Select a network location icon and enter the name of the location e g Home Click the Next button 4 Select Internet direct Connection for sharing and click the Next button 5 Set up the network device to be connected to the external Internet Determine whether to use a firewall and select a network device to be connected to the external Internet e g Wired LAN Set the IP address and then click the Next button KARNE 3 RSS H P PRA TUTARA 1P amamen _________ Determine whether to use a firewall ERAS Select a device 7 Bim P itt P nt ma Set an IP address FRET 2056 288 SARA ANS P a 4 t f rF Bin Noite To protect aoe external intrusion attempts using a firewall is recommended For more information on selecting a device and setting the IP address refer to the description of item 6 of Setting Up a Network on page 4 16 6 Select a network device to connect to the sharing client e g wireless LAN and click the Next button N OS To Share Internet Access through a Wireless LAN In the Select Device field select Wireless In the Wireless Connection Name e g Samsung field enter the network name To use the network key security key select the Use Network Key option and enter a network key Remember the network key because you have to re enter the key on the sharing client to connect fo the sharing server 7 The s
121. work i Step 1 Configuring Printer Sharing 1 From the computer connected to the printer click Start gt Printers and Faxes 2 Right click the printer you want to share and click Sharing 2 PREME olf Cem HHE WR AREA LAM Head a pt OE ppm D wee i LD Sy OR E Sen rte he BEFEL pj SER PED SEAT Sth i SS TIEN B SABER FILLN SEA SHI E mj PSB E ahs STMG ec MEER D REMRANG HERSE Q Sha ay iama RT amp itech 3 Select Share this printer enter a share name for the shared printer and click OK 4 26 Manual 4 In the Printers and Faxes window you will find the printer icon has been changed to another icon on a hand 1310 Series eames MIC Mi Step 2 Adding and Using a Shared Printer 1 From a different computer that wants to use the shared printer click Start gt Printers and Faxes 2 Click Add a printer 3 In the Add Printer Wizard click Next 4 Select A network printer or a printer attached to another computer and click Next 5 Select Browse for a printer and click Next 6 Select the workgroup or computer select the desired printer and click Next HSH A AAAH eRe Be UP ERE MRE WHTC Samsing MIC 1310 Series MHER HE Mirmanti Windows Wetwnrk 2 HOME San Line nua amame WI 10 Series Fie rien HE Samm MIC 1 310 Series AAR RS Ste Oo E F FeO mie If you cannot find the desired printe
122. x v2 2 1 0 appears in the Local Area Connection Properties window A The AEGIS Protocol is a security authentication protocol that is automatically installed when PRO Set is installed and does not affect the operation of other pro grams Q13 Although I have turned the wireless LAN off using the Off Button on the PROSet the wireless LAN operating light is still on A This is normal The O ff Button for the Wireless LAN on the PRO Set only turns off the S W and not the H W for the Wireless LAN Q14 After installing the PROSet cannot manage the wireless net work under Windows A Click on Use Microsoft Client in the Tools menu of the PRO Set program to manage a wireless network in W indows To manage a wireless network in the PRO Set program click on Use Inter PRO Set W ireless in the Tools menu of the PRO Set program Chapter 7 Recovering the Computer 7 21 7 22 Manual Game Program Related Q1 3D game is not executed or some functions are not working A Change the graphic setting of the game to 2D or Software Renderer then exe cute the program again Q2 I launched a game right after installing it and the game is not executed A This problem may occur when the game is not compatible with W indows XP Launch the game again and it will be executed properly Q3 While playing a 3D game I tried to change display devices using lt Fn gt lt gt keys then the system does not operat
123. xccissvecssxosssedesssasdursertdenvonsoussnrddvonsabtentatevendouevenedeys 7 6 ase N E EOE A E ENA AE A E 7 9 Appendix System Specchi ONS eiiysarccsdey acento esate deatenssentisesentasscuasianiectacssadtea smateoncel A 2 Wireless LAN Specifications ccccccccscsscssescsccscssesecsssecsecscsecseeaceeseeaseeeas A 3 Cy ITA ENEA seepage ears EAA A 5 Safety Instructions a ncacs prio cnvtsovateasaisenes canter soradnsnrasmawndcdenpieedsamtenmereesuonee A 6 Samsung Notebook Computer Global Warranty j io This chapter provides basic information for using this computer System overview and methods for general use are provided A Introducing The Computer Front View LCD Latch LCD Panel Keyboard P 1 9 Status Indicators P 1 11 Power Button P 1 5 AVStation Buttons P 3 17 3 30 Volume Control Buttons Wireless LAN Button P 4 7 Etiquette Mode Button P 1 9 Status Indicators P 1 11 Touchpad Speaker L Button Touchpad P 1 7 Speaker R Multi Card Slot P 3 9 Remote Control Sensor P 1 14 AVStation Buttons AVStation is a multimedia program that enables users to play MUSIC PHOTO and MOVIE files When the computer is turned off or in Hibernation AVStation now is launched P 3 30 When the computer is turned on AVStation premium is launched P 3 17 Nore 1 2 Manual Right View Headphone Jack S PDIF Jack Optical P 3 7
124. ximum power saving mode see P 5 2 Nore To launch AVStation now click the AVStation button AVStation Button Alternatively click the AVS button on the remote control NIORS For more remote control use procedures refer to Using the Remote gt Control P 1 14 E Exiting AVStation now 1 Press the lt Esc gt key or right click to move to the start screen of AVStation now 2 In the start screen press the lt Ese gt key or select Exit 3 In the Exit window select Exit INIG Booting and using the computer when using AVStation now Select lt Go Window gt from the Exit window Your computer will start 3 30 Manual E AVStation now Menus AVStation now consists of the following 3 menus hs AVStation now music PHOTO i Menu gt MUSIC Using this menu you can play a music file or an audio CD gt PHOTO Using this menu you can view a picture image and view a picture through the Slide Show gt MOVIE Using this menu you can play a video movie file or a DVD VCD title Using AVStation now The procedures for using AVStation now will be described below E The To Move Select and Run Menus In AVStation now you can use the keyboard mouse and remote control gt Moving a Menu or an Item Press the direction keys on the keyboard or move the mouse to move the cursor fo a menu or item and then click it Or press the Direction button on the remote control gt
125. y Enables users to search for information in files Search pa or the Internet Run 3 Runs programs or documents 2 4 Manual Understanding a Window A window is the basic component in working with the computer The My Computer window which is a window for the computer s hard drive will be used as an exam ple here to show the basic composition of a window Click Start gt My Computer Tool Bar BRT tr OQ VENE Mikin i merce Ey Amz G mma Quick Task Window a had ay aLRIAIN i MARET iy OR bea Title Bar Menu Bar pe a i J Folder Icon AD RAE ts TT T Aaa O wex ii pe fa tJ cl at bors Eg PAN C E foe D Di Ba SARS REE Close Window Button Maximize Button Minimize Button Double click a shared document or a local disk to view the folders and files in it Double click the hard drive local disk to view internal folders and files stored in it If the contents do not appear click Show Contents Nore What is a Drive What is a Folder What is a File A storage device in which files and folders are saved in and read from A folder is used to group and manage files systematically and may include files in sub folders It is similar to a bookshelf A file is a document or various kinds of material that is generated as a result of program operation It is also called data To view the entire structure of the drive
126. you type will be Turns on when it is set to scroll the screen up and down while the cursor position does not change in some applications Hard Disk Drive Blinks when the hard disk drive or CD drive is in operation CD Drive Wireless LAN Turns on when wireless LAN function is enabled y This light does not operate for the models without wireless LAN Blue When the computer is operating on AC power and the battery is fully charged 9 Charger Amber When the computer is operating on AC power and the battery is being charged Off When the computer is operating on battery power D Power Turns on when the computer is turned on Blinks when the computer is in Standby mode P y Chapter 1 Getting Started 1 11 1 12 Manual Adjusting LCD Brightness There are 8 levels of LCD brightness 1 Dimmest 8 Brightest E To adjust using keyboard Press lt Fn gt lt t gt or lt Fn gt lt gt keys from the keyboard to adjust LCD brightness When changed the current LCD brightness is displayed on the top left corner of the LCD screen for a few seconds Whenever you turn the system on or change the power source the brightness level changes according to the settings when operating on AC power Brightness Level 8 when operating on battery power Brightness Level 1 E Adjusting the brightness using the Battery Manager You can adjust the screen brightness using the Battery Manager P 5 6

Samsung NP-M50 User Manual

Contents

Download Pdf Manuals

Related Search

Related Contents