Home

Samsung LA40C550J1M User Manual

1. Installing batteries Battery size AAA ena Q NOTE 3 e Use the remote control within 23 feet from the TV e Bright light may affect the performance of the remote control Avoid using nearby special fluorescent light or neon signs The colour and shape may vary depending on the model English 5 a Kid Sangeet Getting Started When the TV is initially powered on basic settings proceed automatically W Preset Connecting the mains and antenna VHF UHF Antenna Cable Power Input Plug amp Play Initial Setup When the TV is initially powered on a sequence of on screen prompts will assist in configuring basic settings Press the POWER button Plug amp Play is available only when the Input source is set to TV Selecting Store Demo Press the lt or B button then press the ENTER C button POWER or Home Use e Select the Home Use mode Store Demo Mode is for retail 1 environments e Return the unit s settings from Store Demo to Home Use standard Press the volume button on the TV When the OSD volume is displayed press and hold MENU for 5 sec Selecting a country Press the A or V button then press the ENTER C button Select the appropriate country Selecting a channel Press the ENTER C button then press the A or V button to select the channel source to memorise Press the ENTER C button to select Search For more information refer to Channel Auto
2. The sorting method may vary e The scene search function may not be supported e The Play Continuously function which resumes playing of a video may not be supported The Play Continuously function does not support multiple users It will have only memorized the point where the most recent user stopped playing e The lt lt REW gt gt FF or IT Pause buttons may not work depending on the content information QV If you experience any file stuttering issue while playing a video over a wireless network we recommend using a wired network WB it might not work properly with unlicensed multimedia files a Need to Know List before using Media Play e MTP Media Transfer Protocol is not supported e The file system supports FAT16 FAT32 and NTFS e Certain types of USB Digital camera and audio devices may not be compatible with this TV Media Play only supports USB Mass Storage Class MSC devices MSC is a Mass Storage Class Bulk Only Transport device Examples of MSC are Thumb drives Flash Card Readers and USB HDD USB HUB are not supported Devices should be connected directly to the TV s USB port e Before connecting your device to the TV please back up your files to prevent them from damage or loss of data SAMSUNG is not responsible for any data file damage or data loss Connect a USB HDD to the dedicated port USB1 HDD port Do not disconnect the USB device while it is loading
3. Issues Solutions and Explanations Picture Quality First of all please perform the Picture Test and confirm that your TV is properly displaying test image go to MENU Support Self Diagnosis Picture Test P 19 If the test image is properly displayed the poor picture may caused by the source or signal The TV image does not look as good as it did in the store e If you have an analogue cable set top box upgrade to a digital set top box Use HDMI or Component cables to deliver HD high definition picture quality e Cable Satellite subscribers Try HD stations from the channel line up e Antenna connection Try HD stations after performing Auto programme amp Many HD channels are upscaled from SD Standard Definition contents e Adjust the Cable Set top box video output resolution to 1080i or 720p e Make sure you are watching the TV at the minimum recommended distance based on the size and definition of the signal The picture is distorted macroblock error small block dots pixelization Colour is wrong or missing e Compression of video contents may cause picture distortion especially in fast moving pictures such as sports and action movies e Low signal level or bad quality can cause picture distortion This is not a TV issue e If you re using a component connection make sure the component cables are connected to the correct jacks Incorrect or loose connections may cause colour problems or a blan
4. 2 Choose Select a network A list of devices networks appears 3 While in the device list press the Blue button on the remote The message Ad hoc is a direct WI Fi connection with cellphone or PC The existing network system may have limited functionality Do you want to change the network connection is displayed 4 Input the generated Network Name SSID and Security Key into the device you want to connect How to connect an existing Ad hoc device 1 Follow Steps 1 through 6 in the How to set up using PBC WPS P 24 2 Choose Select a network Then the device list will be displayed 3 Select the device you want in the Device list If security key was applied input the security key O If network does not operate normally check the Network Name SSID and Security Key again An incorrect Security Key may cause a malfunction Network Setup Manual If the other methods do not work you need to enter the Network setting values manually Getting the Network Connection Values To get the Network setting values on most Windows computers follow these steps 1 Right click the Network icon on the bottom right of the screen 2 In the pop up menu click Status 3 On the dialog that appears click the Support tab On the Support tab click the Details button The Network settings are displayed How to set up manually To enter the Network settings into your TV follow these steps 1 Follow S
5. Basic Features m Change PIN Change your personal ID number required to set up the TV O If you forget the PIN code press the remote control buttons in the following sequence which resets the PIN to 0 0 0 0 POWER off gt MUTE 8 gt 2 4 POWER on Other Features Language m Teletext Language Set a desired language for teletext SI English is the default in cases where the selected language is unavailable in the broadcast H Preference Primary Audio Language Secondary Audio Language Primary Subtitle Language Secondary Subtitle Language Primary Teletext Language Secondary Teletext Language Select a language which will be the default language when a channel is selected Subtitle Use this menu to set the Subtitle mode susr amp The subtitle feature does not work in Component or HDMI modes H Subtitle Off On Switches subtitles on or off E Mode Normal Hearing Impaired Sets the subtitle mode E Subtitle Language Sets the subtitle language amp Q ifthe programme you are watching does not support the Hearing Impaired function Normal automatically activates even if the Hearing Impaired mode is selected amp English is the default in cases where the selected language is unavailable in the broadcast Digital Text Disable Enable New Zealand only If the programme broadcasts with digital text this feature is enabled Network Network Type
6. 30 min 60 min Activates the Stand by mode in the case of No Signal or Check Signal Cable status for a certain period of time defined by the user Disabled when the PC is in power saving mode fi Changing the Picture Options Advanced Settings available in Standard Movie mode You can adjust the detailed setting for the screen including colour and contrast in PC mode you can only make changes to Dynamic Contrast Gamma and White Balance Advanced Settings Black Tone Off gt Dynamic Contrast Medium Shadow Detail w Gamma 0 RGB Only Mode Off Colour Space Native White Balance y 2 Move Enter 9 Return m Black Tone Off Dark Darker Darkest Select the black level to adjust the screen depth E Dynamic Contrast Off Low Medium High Adjust the screen contrast H Shadow Detail 2 2 Increase the brightness of dark images amp Disabled under PC mode E Gamma Adjust the primary colour intensity E RGB Only Mode Off Red Green Blue You can adjust Colour or Tint of Red Green or Blue for the picture from an external device DVD player home theatre etc H Colour Space Auto Native Adjust the range of colours available to create the image m White Balance Adjust the colour temperature for a more natural picture R Offset G Offset B Offset Adjust each colour s red green blue darkness R Gain G Gain B Gai
7. Country You can change the desired country amp The PIN number input screen appears Enter your 4 digit PIN number amp The default PIN number of a new TV set is 0 0 0 0 Auto Store Scans for a channel automatically and stores in the TV Q Automatically allocated programme numbers may not correspond to actual or desired programme numbers If a chamnel is locked using the Child Lock function the PIN input window appears m Channel Source Digital amp Analogue Digital Analogue Select the channel source to memorise Manual Store Scans for a channel manually and stores in the TV amp If a channel is locked using the Child Lock function the PIN input window appears Digital Channel Channel Frequency Bandwidth When scanning has finished channels are updated in the channel list Bandwidth is available in New Zealand Singapore H Analogue Channel Programme Colour System Sound System Channel Search If there is abnormal sound or no sound reselect the sound standard required amp Channel mode e C aerial channel mode S cable channel mode These two modes allow you to select a channel by entering the assigned number for each aerial broadcasting station or cable channel i Editing channels Channel Manager Option Menu in Channel Manager 1 Select a channel and press the TOOLS button 2 Edit the channel name or number using the Edit Channel Name or Edit Channel Number m
8. Family Affairs Dark Angel N View Mode Information CC Cancel ERed View Mode View the list of programmes that are playing now or coming up Yellow 24 hours Viewing the list of programmes to be broadcasted after 24 hours Blue Ch Mode Select the type of channels you want to display on the Channel View window The Ch Mode differs according to the antenna source 4 Information Displays details of the selected programme Page Moves to the previous next page ENTER C button When selecting the current programme you can watch the selected programme When selecting the future programme you can reserve to watch the selected programme To cancel the schedule press the ENTER C button again and select Cancel Schedules 10 English Channel Manager Delete or set favourites channels and use the programme guide for digital broadcasts Select a channel in the Channels My Channels or Scheduled screen N1 1futech All AE 24ore tv sgjeuueu9 Radio 3 BBC World Data Other a paba oonerang Analogue 32 Cartoon Nwk 5 Class News Coming Soon Discovery BiZoom W Select Sort Page JI Tools E Q Channels Shows the channel list according to channel type m W My Channels Shows the group of the channel E Scheduled Shows all the currently reserved programmes SI Using the colour buttons with the Channel Manager Green Zoom Enlarges o
9. e MSC supports MP3 and JPEG files while a PTP device supports JPEG files only The higher the resolution of the image the longer it takes to display on the screen e The maximum supported JPEG resolution is 15360X8640 pixels For unsupported or corrupted files the Not Supported File Format message is displayed If the files are sorted by Basic View up to 1000 files can be displayed in each folder e MP3 files with DRM that have been downloaded from a non free site cannot be played Digital Rights Management DRM is a technology that supports the creation of content the distribution and management of the content in an integrated and comprehensive way including the protection of the rights and interests of the content providers the prevention of the illegal copying of contents as well as managing billings and settlements If more than 2 PTP devices are connected you can only use one at a time If more than two MSC devices are connected some of them may not be recognized A USB device that requires high power more than 500mA or 5V may not be supported e If an over power warning message is displayed while you are connecting or using a USB device the device may not be recognized or may malfunction If the TV has been no input during time set in Auto Protection Time the Screensaver will run The power saving mode of some external hard disk drives may be released automatically when connected to the TV If a USB extension cable is
10. On amp If there is no video signal both speakers will be mute Additional Setting digital channels only E DTV Audio Level MPEG HE AAC This function allows you to reduce the disparity of a voice signal which is one of the signals received during a digital TV broadcast to a desired level Q According to the type of broadcast signal MPEG HE AAC can be adjusted between 10dB and OdB To increase or decrease the volume adjust between the range O and 10 respectively E SPDIF Output SPDIF Sony Philips Digital InterFace is used to provide digital sound reducing interference going to speakers and various digital devices such as a DVD player Audio Format During the reception of a digital TV broadcast you can select the Digital Audio output SPDIF format from the options PCM or Dolby Digital amp By connecting to 5 1ch speakers in a Dolby Digital setup maximize your interactive 3D sound experience Audio Delay Correct audio video mismatch when watching TV or video and listening to digital audio output using an external device such as an AV receiver 16 English m Dolby Digital Comp Line RF This function minimizes signal disparity between a dolby digital signal and a voice signal i e MPEG Audio HE AAC ATV Sound Select Line to obtain dynamic sound and RF to reduce the difference between loud and soft sounds at night time Line Set the output level for signals greater or
11. STB Set Top Box satellite receiver and is connected to the TV via HDMI only 2 CH audio will be heard from the home theatre receiver If you want to hear 5 1 CH audio connect the digital audio out jack from your DVD Blu ray player cable box STB satellite receiver directly to an amplifier or home theatre SI Headphones 6 You can comnect your headphones to the headphones output on your set While the headphones are connected the sound from the built in speakers will be disabled e Sound function may be restricted when connecting headphones to the TV e Headphone volume and TV volume are adjusted separately Changing the Input Source Edit Name m VCR DVD Cable STB Satellite STB PVR STB Source List AV Receiver Game Camcorder PC DVI PC DVI Devices TV IPTV Blu ray HD DVD DMA Name the device connected to the input jacks to make your input source selection easier amp When a PC with a resolution of 1920 x 1080 60HZz is connected to the HDMI IN 1 DVI port you should set to DVI PC mode under Edit Name Si When connecting an HDMI DVI cable to the HDMI IN 1 DVI port you should set to DVI PC or DVI Devices mode under Edit Name Use to select TV or other external input SOURCE sources such as DVD Blu ray players cable box STB satellite receiver connected to the TV E TV PC AV Componenti Component2 HDMI11 DVI HDMI2 HDMI3 HDMI4 USB Ki In the Source List connected inputs
12. Speaker Select is set to External Speaker or the sound is muted by pressing the MUTE button Signal Information digital channels only HDTV Em By Online Upgrade the software using the Internet channel s reception quality is either perfect or the First configure your network For detailed channels are unavailable Adjust your antenna to procedures on using the Network Setup refer to increase signal strength the Network Connection instructions amp Q If the internet connection does not operate properly the connection may be broken Please retry downloading If the problem persists download by USB and upgrade Em Troubleshooting If the TV seems to have a problem refer to this description amp If none of these troubleshooting tips apply contact the Samsung customer service centre m By Channel Upgrade the software using the broadcasting signal amp Ifthe function is selected during the software Software Upgrade Software Upgrade can be performed via a broadcasting transmission period software will be automatically signal or by downloading the latest firmware from samsung searched and downloaded com to a USB memory device The time required to download the software is Current Version the software already installed in the TV determined by the signal status O Software is represented as Year Month Day_Version EB Standby Mode Upgrade A manual upgrade will be automatically pe
13. Subnet Mask Gateway and DNS Server values Use the number buttons on your remote to enter numbers and the arrow buttons to move from one entry field to another 5 When done press the RETURN button on your remote 6 Select Network Test to check the Internet connectivity Connecting Wireless Network To connect your TV to your network wirelessly you need a wireless router or modem and a Samsung Wireless LAN Adapter WISO9ABGN which you connect to your TV s back or side panel USB jack See the illustration below To use the SWL Samsung Wireless Link function connect to the USB 1 HDD port TV Side Panel The LAN Port on the Wall sainjgay paoueApy 0 Samsung Wireless LAN Adapter or TV Rear Panel Samsung s Wireless LAN adapter is sold separately and is offered by select retailers Ecommerce sites and Samsungparts com Samsung s Wireless LAN adapter supports the IEEE 802 11A B G and N communication protocols Samsung recommends using IEEE 802 11N When you play video over a IEEE 802 11B G connection the video may not play smoothly amp NOTE You must use the Samsung Wireless LAN Adapter WISO9ABGN to use a wireless network e Samsung s Wireless LAN adapter is sold separately The WISO9ABGN Wireless LAN adapter is offered by select retailers Ecommerce sites and Samsungparts com To use a wireless network your TV must be connected to a wireless IP sharer If the wireless IP sh
14. To view the contents of a message switch to TV viewing mode When a message from an unknown mobile phone is displayed select the mobile phone on the message menu in AllShare and select Denied to block the phone Message View If anew SMS message arrives while you are watching TV the alarm window appears If you click the OK button the contents of the message are displayed amp You can configure the viewing settings for SMS messages on your mobile phones For the procedures refer to the mobile phone manual QD Some types of characters may be displayed as blank or broken characters Call Arrival Alarm If a call arrives while you are watching TV the alarm window appears Schedule Alarm While you are watching TV the alarm window appears to display the registered event You can configure viewing settings for schedule contents on your mobile phones For the procedures refer to the mobile phone manual Q Some special characters may be displayed as blank or broken characters Using the Media Function An alarm window appears informing the user that the media contents videos photos music sent from a mobile phone will be displayed on your TV The contents are played automatically 3 seconds after the alarm window appears If you press the RETURN or EXIT button when the alarm window appears the media contents are not played LO NOTE e If the media function executes for the first time the warning popup window
15. es ely us uls mGa uis as wv Number Ella ab ab da Ua a S29 Lower case UOS aie WOD WBa ubas Gl aly E Delete Wa u aa aa w a a Space o Move C Enter 9 Return On the Security screen enter your network s Pass Phrase DY You should be able to find the Pass Phrase on one of the set up screens you used to set up your router or modem To enter the Pass Phrase follow these general directions Press the number buttons on your remote to enter numbers Use the direction buttons on your remote to move from button to button on the Security Key screen Press the Red button to change case or display symbols characters Toaenter letter or symbol move to the letter or symbol and then press the ENTER C button To delete the last letter or number you entered press the Green button on your remote When done press the Blue button on your remote The Network Connecting screen appears 10 Wait until the connection confirmation message is displayed and then press the ENTER C button The Network Setup screen re appears 11 To test the connection press the RETURN button to select Network Test and then press the ENTER C button Network Setup Ad Hoc You can connect to a mobile device without an access point through the Samsung Wireless LAN Adapter by using a peer to peer network How to connect to new Ad hoc 1 Follow Steps 1 through 6 in the How to set up using PBC WPS P 24
16. Network You can attach your TV to your LAN using cable in three ways e You can attach your TV to your LAN by connecting the LAN port on the back of your TV to an external modem using a Cat 5 cable See the diagram below soinyea4 paoueapy 0 TV Rear Panel The Modem Port on the Wall External Modem ADSL VDSL Cable Modem Cable LAN Cable e You can attach your TV to your LAN by connecting the LAN port on the back of your TV to a IP Sharer which is connected to an external modem Use Cat 5 cable for the connection See the diagram below The Modem Port on the Wall External Modem IP Sharer TV Rear Panel ADSL VDSL Cable TV having DHCP server LAN Cable LAN Cable e Depending on how your network is configured you may be able to attach your TV to your LAN by connecting the LAN port on the back of your TV directly to a network wall outlet using a Cat 5 cable See the diagram below Note that the wall outlet is attached to a modem or router elsewhere in your house The M Port on the Wall e Modem Port on the Wal TV Rear Panel LAN Ar UU LAN Cable If you have a Dynamic Network you should use an ADSL modem or router that supports Dynamic Host Configuration Protocol DHCP Modems and routers that support DHCP automatically provide the IP address subnet mask gateway
17. Not available in PC Component or HDMI mode 14 English m Digital Noise Filter Off Low Medium High Auto Auto Visualisation When the broadcast signal is weak some static and ghosting may appear Select one of the options until the best picture is displayed Auto Visualisation When changing analogue channels displays signal strength Q Only available for analogue channels amp When bar is green you are receiving the best possible signal E MPEG Noise Filter Off Low Medium High Auto Reduces MPEG noise to provide an improved picture quality amp Q Disabled under PC mode Em HDMI Black Level Normal Low Selects the black level on the screen to adjust the screen depth Available only in HDMI mode RGB signals E Film Mode Off Auto1 Auto2 Sets the TV to automatically sense and process film signals from all sources and adjust the picture for optimum quality amp Available in TV AV COMPONENT 480i 1080i and HDMI 480i 10801 H Auto Protection Time 2 hours 4 hours 8 hours 10 hours Off If the same image remains on the screen Auto Screen Burn Protector will work Picture Reset OK Cancel Resets your current picture mode to its default settings D Setting up the TV with Your PC Set the input source to PC Auto Adjustment Adjust frequency values positions and fine tune the settings automatically amp Not available when connecting through HDMI DVI
18. Off On Activate or deactivate the PIP function Channel Select the channel for the sub screen Sub picture Size L _ Select a size for the sub picture Position 7 fF sub picture Select a position for the Sound Select Main Sub You can choose the desired sound Main Sub in PIP mode Support Menu Installing the Latest Version m By USB Insert a USB drive TV Side Panel containing the firmware f Self Diagnosis upgrade file downloaded m Picture Test Yes No Use to check for picture from www samsung com problems and if the problem continues to occur check into the TV Please be careful CO not to disconnect the power the colour pattern t P or remove the USB drive saumeoy olseg 20 Or E Sound Test Yes No Use the built in melody sound to until upgrades are complete 3 check for sound problems The TV will be tumed off He amp Q amp If you hear no sound from the TV s speakers and on automatically after USBDive before performing the sound test make sure completing the firmware Speaker Select is set to TV speaker in the upgrade When software is Sound menu upgraded video and audio settings you have made will return to their default settings We advise you to write down your settings so that you can easily reset them after the upgrade The melody will be heard during the test even if
19. Security Key is based on a Pass Phrase typically a word or a series of letters and numbers of a specified length you were asked to enter when you set up security for your wireless network If you use this method of setting up the network connection and have a Security Key for your wireless network you will have to enter the Pass Phrase during the setup process 9 24 English steps If your router has a PBC WPS button follow these steps 1 Follow Steps 1 through 6 in the How to set up PBC WPS above Press the V button to select Internet Protocol Setup and then press the ENTER C button Press the A or V button to select Auto and then press the ENTER Ce button Press the A button to go to Select a Network and then press the ENTER C button The Network function searches for available wireless networks When done it displays a list of the available networks In the list of networks press the A or V button to select a network and then press the ENTER C button O Ifthe AP is set to Hidden Invisible you have to select Add Network and enter the correct Network Na me SSID and Security Key to establish the connection If the Security PIN pop up appears go to Step 6 If the Network Connecting Screen appears go to Step 10 Press the A or V button to select Security or PIN For most home networks you would select Security for Security Key The Security Screen appears Network Setup Security Key C 0 entered
20. actual product appearance Product design and specifications may be changed without notice Still image warning Avoid displaying still images like jpeg picture files or still image element like TV programme logo panorama or 4 3 image format stock or news bar at screen bottom etc on the screen Constant displaying of still picture can cause ghosting of LCD screen which will affect image quality To reduce risk of this effect please follow below recommendations e Avoid displaying the same TV channel for long periods e Always try do display any image on full screen use TV set picture format menu for best possible match e Reduce brightness and contrast values to minimum required to achieve desired picture quality exceeded values may speed up the burnout process e Frequently use all TV features designed to reduce image retention and screen burnout refer to proper user manual section for details Securing the Installation Space Keep the required distances between the product and other objects e g walls to ensure proper ventilation Failing to do so may result in fire or a problem with the product due to an increase in the internal temperature of the product Sy When using a stand or wall mount use parts provided by Samsung Electronics only e Ifyou use parts provided by another manufacturer it may result in a problem with the product or an injury due to the product falling amp The appearance may differ depending
21. and DNS values your TV needs to access the Internet so you don t have to enter them manually Most home networks are Dynamic Networks Some networks require a Static IP address If your network requires a Static IP address you must enter the IP address subnet mask gateway and DNS values manually on your TV s Cable Setup Screen when you set up the network connection To get the IP address subnet mask gateway and DNS values contact your Internet Service Provider ISP If you have a Windows computer you can also get these values through your computer amp You can use ADSL modems that support DHCP if your network requires a Static IP address ADSL modems that support DHCP also let you use Static IP addresses English 2 1 Advanced Features Network Setup Auto Use the Automatic Network Setup when connecting your TV to a network that supports DHCP To set up your TV s cable network connection automatically follow these steps How to set up automatically 1 Connect your TV to your LAN as described in the previous section 2 Turn on your TV press the MENU button on your remote use the AorV button to select Setup and then press the ENTER 4 button 3 Use the AorV button to select Network in the Setup menu and then press the ENTER C button The Network screen appears Network Wired gt Network Type Network Setup Network test SWL Samsung Wireless Link Off SWL connect Move Enter 9 Re
22. bright room E Standard Suitable for a normal PM ODE environment m Natural Suitable for reducing eye strain amp Natural is not available in PC mode Em Movie Suitable for watching movies in a dark room fl Adjusting picture settings Backlight Contrast Brightness Sharpness Colour Tint G R Your television has several setting options for picture quality control NOTE In analogue TV AV modes of the PAL system the Tint G R function is not available In PC mode you can only make changes to Backlight Contrast and Brightness Settings can be adjusted and stored for each external device connected to the TV Economical Solutions ECO Solution E Energy Saving Off Low Medium High Picture Off Auto Adjust the brightness of the TV in order to reduce power consumption If you select Picture Off the screen is turned off but the sound remains on Press any button except volume button to turn on the screen H ECO Sensor Off On To enhance your power savings the picture settings will automatically adapt to the light in the room O it you adjust the Backlight the Eco Sensor will be set to Off Min Backlight When ECO sensor is On the minimum screen brightness can be adjusted manually amp Q If Eco Sensor is On the display brightness may change become slightly darker or brighter depending on the surrounding light intensity E No Signal Power Off Off 15 min
23. by using A V button 4 3 The default setting for a movie or normal broadcasting amp Do not watch in 4 3 format for a long time Traces of borders displayed on the left right and centre of the screen may cause image retention screen burn which are not covered by the warranty Screen Fit Displays the full image without any cut off when HDMI 720p 1080i 1080p or Component 1080i 1080p signals are inputted LO NOTE e After selecting Screen Fit in HDMI 720p 1080i 1080p or Component 10801 1080p mode you may need to center the picture 1 Press the lt or B button to select Position 2 Press the ENTER C button 3 Press the A V lt or gt button to move the picture Depending on the input source the picture size options may vary The available items may differ depending on the selected mode e In PC mode only 16 9 and 4 3 modes can be adjusted Settings can be adjusted and stored for each external device connected to an input of the TV If you use the Screen Fit function with HDMI 720p input 1 line will be cut at the top bottom left and right as in the overscan function Screen Mode 16 9 Wide Zoom Zoom 4 3 Available only when picture size is set to Auto Wide You can determine the desired picture size at the 4 3 WSS Wide Screen Service size or the original size Each European country requires different picture size DD This feature is only available in New Zealand Singapore Q
24. can read the mobile s files and view the phone book and calendar on the TV Also in the phone book you can make a call to another person or send to SMS NOTE You must have ScreenShare installed on your Samsung Mobile phone device to use this feature Doc Viewer can read files in doc format but cannot modify them The screen display may differ depending on the connected device e DAR Calendar Contacts Doc viewer Select Mi Return Using your Samsung Phone to Operate Your TV Before you can use this feature you must connect to a Samsung mobile phone that supports ScreenShare functions When operating the TV with your mobile phone only the POWER VOL V CH A and MUTE buttons are supported Even if you keep pressing down on a control button channel or volume on the mobile phone the value will only go up or down by one unit English 3 7 sainjgay peoueApy vo Other Information The index page of the Teletext service gives you information on how to use the service For Teletext information to be displayed correctly channel reception must be stable Otherwise information may be missing or some pages may not be displayed SO You can change Teletext pages by pressing the numeric buttons on the remote control o ENA etext on mix page up Display the next Activate the Teletext mode after selecting the channel providing the Teletext service Press it twice to over
25. control for the visually impaired persons and has Braille points on the Power Volume Channel Q p p p p buttons z 5 sunt N Q D Ti the TV d off P mis he rOnand oE B el Displays and selects the available a i a Selects the HDMI mode directly P 7 HDMI video sources P 8 Press to directly access to channels Alternately selects Teletext Double L t 2 0 faj ll or MIX J p r Cuts off the sound temporarily Adjusts the volume Changes channels Displays the main on screen menu ca ust 9 all Displays channel list on the screen P 12 Views Media Play P 26 wn MEDIA P yy Displays the EPG Electronic Programme Guide P9 i j EE TOOLS 5 Quickly selects frequently used functions Baga lt Displays information on the TV screen P 9 Selects on screen menu items and change menu values Returns to the previous menu P 9 Exit the menu P 9 Buttons in the Channel Manager Media Play menu etc P MODE Selects picture mode P 12 S MODE Selects the sound mode P 15 DUAL I II Selects dual sound mode P 16 AD Audio Description selection Not available in Use these buttons in the Media Play and some locations P 15 Anynet modes P iya 33 C3 C9 P SIZE Choose the picture size P 14 SUBT Digital subtitle display P 18 controls recording on Samsung recorders with the Anynet feature CJ CJ C SAMSUNG
26. jack of the receiver to the DIGITAL AUDIO OUT OPTICAL jack of the TV When the receiver i e Home Theatre is set to On you can hear sound output from the TV s Optical jack When the TV is displaying a DTV aerial signal the TV will send out 5 1 channel sound to the receiver When the source is a digital component such as a DVD and is connected to the TV via HDMI only 2 channel sound will be heard from the receiver NOTE e You can only control Anynet devices using the TV remote control not the buttons on the TV e The TV remote control may not work under certain conditions If this occurs reselect the Anynet device The Anynet functions do not operate with other manufacturers products 34 English Troubleshooting for Anynet Problem Possible Solution Anynet does not work want to start Anynet Check if the device is an Anynet device The Anynet system supports Anynet devices only Connect only one receiver home theatre Check if the Anynet device power cord is properly connected Check the Anynet device s Video Audio HDMI Cable connections Check whether Anynet HDMI CEC is set to On in the Anynet setup menu Check whether the TV remote control is in TV mode Check whether it is Anynet exclusive remote control Anynet does not work in certain situations Searching channels operating Media Play or Plug amp Play Initial setup etc When connecting or removing the HD
27. less than 31dB reference to either 20dB or 31dB RF Set the output level for signals greater or less than 20dB reference to either 10dB or 20dB Sound Reset OK Cancel Reset all sound settings to the factory defaults D Selecting the Sound Mode When you set to Dual I Il the current all DUAL sound mode is displayed on the screen ando Dual l Il Default Type pm Mono Mono Automatic Stereo Stereo s Mono change Stereo Dual Dual Dual II Dual Mono Mono Automatic NICAM Stereo Mono Stereo change Stereo gt ri Dual Mono Dual Dual S Dual Il lt amp W if the stereo signal is weak and an automatic switching occurs then switch to the mono Q Only activated in stereo sound signal Q Only available when the Input source is set to TV D Setting the Time Time Em Clock Setting the clock is for using various timer features of the TV The current time will appear every time you press the INFO button G f you disconnect the power cord you have to set the clock again Clock Mode Auto Manual SI Depending on the broadcast station and signal the auto time set up may not be correct In this case set the time manually The antenna must be connected in order to set the time automatically Clock Set Set the Day Month Year Hour and Minute manually Available only when Clock Mode is set to Manual Time Zone You can select your time z
28. of the home theatre and the HDMI OUT jack of the corresponding Anynet device using an HDMI cable NOTE Connect the Optical cable between the DIGITAL AUDIO OUT OPTICAL jack on your TV and the Digital Audio Input on the Home Theatre When following the connection above the Optical jack only outputs 2 channel audio You will only hear sound from the Home Theatre s Front Left and Right speakers and the subwoofer If you want to hear 5 1 channel audio connect the DIGITAL AUDIO OUT OPTICAL jack on the DVD satellite box i e Anynet Device 1 or 2 directly to the Amplifier or Home Theatre not the TV Connect only one Home Theatre e You can connect an Anynet device using the HDMI cable Some HDMI cables may not support Anynet functions Anynet Menu Anynet works when the AV device supporting Anynet is in the standby or on status Anynet supports up to 12 AV devices in total Note that you can connect up to 3 devices of the same type The Anynet menu changes depending on the type and status of the Anynet devices connected to the TV Anynet Menu Description View TV Device List Changes Anynet mode to TV broadcast mode Shows the Anynet device list Recording recorder Starts recording immediately using the recorder This is only available for devices that support the recording function device_name MENU Shows the connected device menus E g If a DVD recorder is connected th
29. on the product Installation with a stand Installation with a wall mount 2 English Contents Accessories Viewing the Control Panel Viewing the Remote Control Connecting to an Antenna Plug amp Play Initial Setup Getting Started DD Od BK N Connecting to an AV Device Connecting to an Audio Device 8 Changing the Input Source Connections Co Basic Features 9 How to Navigate Menus 9 Using the INFO button Now amp Next guide 9 Planning Your Viewing 11 Channel Menu 12 Picture Menu 15 Sound Menu 17 Setup Menu 19 Support Menu Advanced Features 20 Comnecting to a PC 21 Network Connection 26 Media Play 33 Anynet 36 AllShare Other Information 38 Analogue Channel Teletext Feature 39 Preparing before installing Wall Mount 46inch TV 39 Installing the Wall Mount 40 Assembling the Cables 41 Anti Theft Kensington Lock 41 Securing the TV to the Wall 42 Troubleshooting 45 Specifications 46 Index Check the Symbol This function can be used by One Touch Button pressing the TOOLS button on the remote control English 3 Getting Started SO Please make sure the following items are included with your LCD TV If any items are missing contact your dealer amp The items colours and shapes may vary depending on the models e Remote Control amp Batteries AAA x 2 e Cleaning Cloth e Owner s Instructions e Power Cord e Warranty Card Safety Guide Not availab
30. samsung com TV Side Panel PC Samsung Wireless TV Rear Panel LAN Adapter External Modem DSL Cable 1 K u Wireless IP sharer LAN Cable 1 For more information on how to configure your network refer to Network Connection You are recommended to locate both TV and PC in same subnet The first 3 parts of the subnet address of the TV and the PC IP addresses should be the same and only the last part the host address should be changed e g IP Address 123 456 789 2 Using aLAN cable connect between the external modem and the PC onto which the Samsung PC Share Manager program will be installed e You can connect the TV to the PC directly without connecting it through a Sharer Router 26 English amp Functions that are not supported when connecting to a PC through a network The Background Music and Background Music Setting functions Sorting files by preference in the Photo Music and Movie folders The lt lt REW or gt gt FF button while a movie is playing amp The Divx DRM Multi audio embedded caption does not supported Q Samsung PC Share manager should be permitted by the firewall program on your PC When you use Media Play mode through a network connection According to functions of the provided server sounyeej4 paduenpy vo
31. used the USB device may not be recognized or the files on the device may not be read If a USB device connected to the TV is not recognized the list of files on the device is corrupted or a file in the list is not played connect the USB device to the PC format the device and check the connection If a file deleted from the PC is still found when Media Play is run use the Empty the Recycle Bin function on the PC to permanently delete the file English 27 Advanced Features fl Screen Display Move to the file you desired using the up down right left buttons and then press the ENTER C or gt Play button The file is played Q Supports the View Device and Home in Media Play homepage Information You can ascertain the selected file name and the number of files and page Displays sorting standard amp Sorting standard is different depending on the contents Videos Playing a Video 1 Press the lt or B button to select Videos then press the ENTER Videos Movie 01 avi Jan 10 2010 Jan 10 2010 Operation Button EY Red Change Device Selects a connected device E Green Preference Sets the file preference not supported in Basic view Yellow Select Selects multiple files from file list Selected files are marked with a symbol O Blue Sorting Select the sort list AJ Tools Displays S Using the lt lt REW or gt gt Movie 02 a
32. 0 6 30 8 2 Divx 3 11 4 x 5 1 6 0 1920x1080 6 30 g asin i XviD 1920x1080 6 30 8 MP3 AC3 LPCM H 264 BP MP HP 1920x1080 6 30 25 ADPCM WMA MPEG4 SP ASP 1920x1080 6 30 8 wmv ASF Window Media Video v9 1920x1080 6 30 25 WMA H 264 BP MP HP 1920x1080 6 30 25 mp4 MP4 MPEG4 SP ASP 1920x1080 6 30 8 MP3 ADPCM AAC XVID 1920x1080 6 30 8 a PF H 264 BP MP HP 1920x1080 6 30 25 MENG AANO MPEG4 SP ASP 1920x1080 6 30 8 VRO MPEG1 1920x1080 24 25 30 30 oe VOB MPEG2 1920x1080 24 25 30 30 a MPEG1 1920x1080 24 25 30 30 Ane PS MPEG2 1920x1080 24 25 30 30 AC3 MPEG LPCM AAC H 264 1920x1080 6 30 25 ma MPEG2 1920x1080 24 25 30 30 TAT Ka TS H 264 1920x1080 6 30 25 lan Vet 1920x1080 6 30 25 Other Restrictions NOTE e If there are problems with the contents of a codec the codec will not be supported e If the information for a Container is incorrect and the file is in error the Container will not be able to play correctly Sound or video may not work if the contents have a standard bitrate frame rate above the compatible Fram sec listed in the table above If the Index Table is in error the Seek Jump function is not supported Video Decoder Audio Decoder e Supports up to H 264 Level 4 1 e Supports up to WMA 7 8 9 STD e H 264 FMO ASO RS VC1 SP MP AP L4 and AVCHD are not e WMA9 PRO does not support 2 channel excess multi channel or supported lo
33. 1152 x 864 53 783 59 959 81 750 It VESA CVT 1280 x 720 56 456 74 777 95 750 It 1280 x 960 75 231 74 857 130 000 It 640 x 480 31 469 59 940 25 175 Z 640 x 480 37 881 72 809 31 500 640 x 480 37 500 75 000 31 500 800 x 600 37 879 60 317 40 000 800 x 600 48 077 72 188 50 000 800 x 600 46 875 75 000 49 500 1024 x 768 48 363 80 004 65 000 1024 x 768 56 476 70 069 75 000 1024 x 768 60 023 75 029 78 750 1152 x 864 67 500 75 000 108 000 VESA DMI 1280 x 1024 63 981 60 020 108 000 1280 x 1024 79 976 75 025 135 000 1280 x 800 49 702 59 810 83 500 KA 1280 x 800 62 795 74 934 106 500 pH 1280 x 960 80 000 60 000 108 000 1280 x 720 45 000 60 000 74 250 HA 1360 x 768 47 712 80 015 85 500 1440 x 900 55 935 59 887 106 500 KA 1440 x 900 70 635 74 984 136 750 1680 x 1050 65 290 59 954 146 250 1280x720 52 500 70 000 89 040 Te VESA GIF 1280 x 1024 74 620 70 000 128 943 ii VESA DMT DTV CEA 1920 x 1080p 67 500 60 000 148 500 Ha amp NOTE e For HDMI DVI cable connection you must use the HDMI IN 1 DVI jack e The interlace mode is not supported The set might operate abnormally if a non standard video format is selected Separate and Composite modes are supported SOG Sync On Green is not supported 20 English Network Connection You can set up your TV so that it can access the Internet through your local area network LAN using a wired or wireless connection al Connecting to a Wired
34. 50 F to 104 F Operating Humidity 10 to 80 non condensing Storage Temperature 20 C to 45 C 4 F to 113 F Storage Humidity 5 to 95 non condensing TV System Analogue Depending on your country selection Digital DVB T DVB C Colour video system Analogue PAL SECAM NT443 Digital MPEG2 MPEG4 Sound System BG OK NICAM MPEGI HDMI IN 1 4 Video 1080 24p 1080p 1080i Audio Two Channel Linear PCM 32 44 1kHz Analogue audio input HDMI IN1 only PC Input Stand Swivel Left Right 20 20 Model Name LA32C550 LA37C550 LA40C550 LA46C550 Screen Size Diagonal 32 inch 37 inch 40 inch 46 inch Sound Output 10W X2 Dimensions WxDxH Body 793 7 X 78 X 494 3 mm 911 6 X 78 2 X 559 4 mm 980 2 X 80 3 X 597 mm 1112 5 X 80 3 X 672 5 mm With stand 798 7 X 239 X 557 5 mm 911 6 X 255 X 622 8 mm 980 2 X 255 X 660 9 mm 1112 5 X 257 X 736 mm Weight Body 8 8 kg 11 5kg 14 8 kg 17 9 kg With Stand 11 5 kg 14 5 kg 18 2 kg 21 7 kg Q Design and specifications are subject to change without prior notice amp For the power supply and power consumption refer to the label attached to the product English 45 UOIPEUMOJU JBYIO GO Other Information A AD button Anynet Audio Description Audio out jack Auto Adjustment Auto Store B Balance Blanking Bracket C Cable tie Child Lock Component D Digital Audio out D sub E Editing channels Energy Saving E
35. MI cable please make sure to search devices again or turn your TV off and on again Check if the Anynet Function of Anynet device is set on Check if the Anynet device is properly connected to the TV and check if the Anynet HDMI CEC is set to On in the Anynet Setup menu Press the TOOLS button to display the Anynet menu and select a menu you want want to exit Anynet Select View TV in the Anynet menu Press the SOURCE button on the TV remote control and select a device other than Anynet devices Press P W AN PRE CH and FAV CH to change the TV mode Note that the channel button operates only when a tuner embedded Anynet device is not connected The message Connecting to Anynet device appears on the screen You cannot use the remote control when you are configuring Anynet or switching to a view mode Use the remote control when the Anynet setting or switching to view mode is complete The Anynet device does not play You cannot use the play function when Plug amp Play Initial setup is in progress The connected device is not displayed Check whether or not the device supports Anynet functions Check whether or not the HDMI Cable is properly connected Check whether Anynet HDMI CEC is set to On in the Anynet setup menu Search Anynet devices again You can connect an Anynet device using the HDMI Cable only Some HDMI cables may not support Anynet functions If it is t
36. Network Setup Network Test For details on setting up options refer to the Network Connection instructions P 21 General E Game Mode Off On When connecting to a game console such as PlayStation or Xbox you can enjoy amore realistic gaming experience by selecting game mode 18 English LO NOTE e Precautions and limitations for game mode To disconnect the game console and connect another external device set Game Mode to Off in the setup menu If you display the TV menu in Game Mode the screen shakes slightly Game Mode is not available in TV PC and PIP mode e After connecting the game console set Game Mode to On to prevent poor picture quality If Game Mode is On Picture mode is set to Standard and Sound mode is set to Movie H Menu Transparency Bright Dark Set the Transparency of the menu Em Melody Off Low Medium High Set so that a melody plays when the TV is turned on or off ij Picture In Picture PIP PIP Watches simultaneously the TV tuner and one external video source PIP Picture in Picture does not function in the same mode NOTE e Ifyou turn the TV off while watching in PIP mode the PIP window will disappear e You may notice that the picture in the PIP window becomes slightly unnatural when you use the main screen to view a game or karaoke PIP settings Main picture Componenti Component2 HDM11 DVI HDMI2 HDMI TV PC PIP
37. PG Equalizer F Favourite Channel 46 English 5 15 33 15 14 11 15 39 40 17 8 33 20 11 13 15 H HDMI Home Theatre L Language Licence M Manual Store Media Play Melody MP3 Play N Now amp Next guide O ON OFF button Optimal resolution P PIN number PIP Power Indicator 8 33 18 44 11 26 18 30 20 6 11 18 R Remote Control Retuning channels RGB S Screen Mode Sleep Timer Slide Show Software Upgrade Source List Speaker Select Standby mode Subtitle T Teletext Timer U USB V Video play Volume W Wall Mount 11 13 14 17 30 19 16 18 38 17 19 26 28 4 16 39 40 This page is intention ally left blank
38. SERIES imagine the possibilities Thank you for purchasing this Samsung product To receive more complete service please register your product at www samsung com register Model_ Serial No ai Contact SAMSUNG WORLDWIDE If you have any questions or comments relating to Samsung products please contact the SAMSUNG customer care centre Country Customer Care Centre Web Site AUSTRALIA 1300 362 603 www samsung com BAHRAIN 8000 4726 400 810 5858 CHINA 010 6475 1880 www samsung com HONG KONG 852 3698 4698 tie SamSung Cone Ne www samsung com hk_en 3030 8282 1800 110011 INDIA 4800 3000 8282 www samsung com 1800 266 8282 0800 112 8888 INDONESIA 021 5699 7777 www samsung com JAPAN 0120 327 527 www samsung com JORDAN 800 22273 MALAYSIA 1800 88 9999 www samsung com NEW ZEALAND 0800 SAMSUNG 0800 726 786 www samsung com 1 800 10 SAMSUNG 726 7864 1 800 3 SAMSUNG 726 7864 PHILIPPINES 1 800 8 SAMSUNG 726 7864 www samsung com 02 5805777 SINGAPORE 1800 SAMSUNG 726 7864 www samsung com SOUTH AFRICA 0860 SAMSUNG 726 7864 www samsung com TAIWAN 0800 329 999 www samsung com 1800 29 3232 THAILAND 02 689 3232 www samsung com U A E 800 SAMSUNG 726 7864 www samsung com VIETNAM 1 800 588 889 www samsung com BN68 02698A 00 2010 Samsung Electronics Co Ltd All rights reserved Figures and illustrations in this User Manual are provided for reference only and may differ from
39. Store P 11 So Press the ENTER C button at any time to interrupt the memorisation process Setting the Clock Set the Clock Mode automatically or manually Mode KO if you select the Auto select the time zone which you live Australia only Viewing the HD The connection method for the best HD screen quality is displayed Connection Guide Enjoy your TV Press the ENTER C button DOKB W N If You Want to Reset This Feature Select Setup Plug 8 Play Initial Setup Enter your 4 digit PIN number The default PIN number is 0 0 0 0 If you want to change the PIN number use the Change PIN function 6 English Connections Using an HDMI DVI Cable HD connection up to 1080p Available devices DVD Blu ray player HD cable box HD STB Set Top Box satellite receiver cable box satellite receiver STB PAIN amp HDMI IN 1 DVI 2 3 4 PC DVI AUDIO IN e When using an HDMI DVI cable connection you must use the HDMI IN 1 DVI jack For the DVI cable connection use a DVI to HDMI cable or DVI HDMI DVI to HDMI adapter for video connection and the PC DVI AUDIO IN jacks for audio If an external device such as a DVD Blu ray player cable box STB satellite receiver supporting a HDMI versions older than 1 3 is connected the TV may operate abnormally e g no screen display no sound annoying flicker abnormal colour If there is no
40. aker in the sound menu P 16 e f you are using an external device make sure the audio cables are connected to the correct audio input jacks on the TV e f you are using an external device check the device s audio output option ex you may need to change your cable box s audio option to HDMI when you have a HDMI connected to your TV e If you are using a DVI to HDMI cable a separate audio cable is required e If your TV has a headphone jack make sure there is nothing plugged into it The speakers are making an inappropriate noise e Check the cable connections Make sure a video cable is not connected to an audio input e For antenna or cable connections check the signal strength Low signal level may cause sound distortion 42 English Issues Solutions and Explanations No Picture No Video The TV will not turn on Make sure the AC power cord is securely plugged in to the wall outlet and the TV Make sure the wall outlet is working Try pressing the POWER button on the TV to make sure the problem is not the remote If the TV turns on refer to The remote control does not work below The TV turns off automatically Ensure the Sleep Timer is set to Off in the Setup Menu P 17 If your PC is connected to the TV check your PC power settings Make sure the AC power cord is plugged in securely to the wall outlet and the TV When watching TV from an antenna or cable connection the TV will tu
41. arer supports DHCP your TV can use a DHCP or static IP address to connect to the wireless network Select a channel for the wireless IP sharer that is not currently being used If the channel set for the wireless IP sharer is currently being used by another device nearby this will result in interference and communication failure If you apply a security system other than the systems listed blow it will not work with the TV If Pure High throughput Greenfield 802 11n mode is selected and the Encryption type is set to WEP TKIP or TKIPAES WPS2Mixed for your AP Samsung TVs will not support a connection in compliance with new Wi Fi certification specifications If your AP supports WPS Wi Fi Protected Setup you can connect to the network via PBC Push Button Configuration or PIN Personal Identification Number WPS will automatically configure the SSID and WPA key in either mode Keep the Samsung Wireless LAN Adaptor at a distance from the TV If you watch the TV with the adaptor connected nearby images may appear corrupted for some channels If your router modem or device isn t it may not connect to the TV via the Samsung Wireless LAN Adapter Connection Methods You can setup the wireless network connection six ways Samsung Auto Configuration PBC WPS Auto Setup Using the Auto Network Search function Manual Setup SWL Samsung Wireless Link Ad Hoc All of Samsung Wireless LAN Adapter shoud be connected directly t
42. cable Screen E Coarse Fine Removes or reduces picture noise If the noise is not removed by Fine tuning alone then adjust the frequency as best as possible Coarse and Fine tune again After the noise has been reduced readjust the picture so that it is aligned to the centre of screen EB Position Adjust the PC screen position with direction butt n a V 4 B E Image Reset Resets the image to default settings Using Your TV as a Computer PC Display Setting Up Your PC Software Based on Windows XP Depending on the version of Windows and the video card the actual screens on your PC may differ in which case the same basic set up information will almost always be applied If not contact your computer manufacturer or Samsung Dealer 1 Click on Control Panel on the Windows start menu 2 Click on Appearance and Themes in the Control Panel window and a display dialog box will appear 3 Click on Display and a display dialog box will appear Navigate to the Settings tab on the display dialog box e The correct size setting resolution Optimum 1920 X 1080 pixels e If avertical frequency option exists on your display settings dialog box the correct value is 60 or 60 Hz Otherwise just click OK and exit the dialog box Changing the Preset Sound Mode Mode E Standard Selects the normal sound mode MODE Em Music Emphasizes music over voices Em Movie Prov
43. ce C Pause lt gt Jump FA Tools 5 Return amp If the sound is abnormal when playing MP3 files adjust the Equalizer in the Sound menu An over modulated MP3 file may cause a sound problem Photos Viewing a Photo or Slide Show 1 Press the lt or B button to select Photos then press the ENTER C button in the Media Play menu 2 Press the UB A V button to select the desired photo in the file list 3 Press the ENTER C button or gt Play button While a photo list is displayed press the gt Play ENTER C button on the remote control to start slide show All files in the file list section will be displayed in the slide show During the slide show files are displayed in order from currently being shown Music files can be automatically played during the Slide Show if the CE Pause lt p PreviousNext SF Tools 9 Retum Background Music is set to On amp The BGM Mode cannot be changed until the BGM has finished loading 30 English Bl Playing the multiple files Playing the selected video music photo files 1 Press the Yellow button in the file list to select the desired file 2 Repeat the above operation to select multiple files amp NOTE The v mark appears to the left of the selected files e To cancel a selection press the yellow button again To deselect all selected files press the TOOLS button and select Deselect All 3 Press the TOOLS bu
44. code authorized for the TV If you connect to the DivX web site and register the registration code with a personal account you can download VOD registration file If you play the VOD registration using Media Play the registration is completed amp For more information on DivX VOD visit www DivX com E Get the DivX VOD deactivation code When DivX VOD is not registered the registration deactivation code is displayed If you execute this function when DivX VOD is registered the current DivX VOD registration is deactivated E Information Select to view information about the connected device 3 2 English What is Anynet device has this feature check if there is an Anynet logo on it To connect to Home Theatre Anynet is a function that enables you to control all connected Samsung devices that support Anynet with your Samsung TV s remote The Anynett system can be used only with Samsung devices that have the Anynet feature To be sure your Samsung Home Theat Anynet Device 1 Anynet ome Ineatre ne levice Device 2 3 4 L Ce ee HDMI OUT DIGITAL AUDIO N HDMI IN Biia OUT amp HDMI Cable HDMI Cable 1 Connect the HDMI IN 1 DVI 2 3 or 4 jack on the TV and the HDMI OUT jack of the corresponding Anynet device using an HDMI cable 2 Connect the HDMI IN jack
45. ded stability install the anti fall device for safety purposes as follows To avoid the TV from falling Since the necessary clamps screws and string are not supplied please purchase these additionally 1 Drive the screws into the clamps and firmly fasten them onto the wall Make sure the screws are firmly fixed into the wall amp Screw Specifications e Fora 17 29 Inch LCD TV M4 e For a 32 40 Inch LCD TV M6 2 Remove the screws from the centre back of the TV put the screws into the clamps and then fasten the screws onto the TV again 3 Connect the clamps fixed onto the TV and the clamps fixed onto the wall with a strong string and then tie the string tightly Q Verify all connections are properly secured Periodically check connections for any sign of fatigue for failure If you have any doubt about the security of your connections contact a professional installer amp Install the TV near to the wall so that it does not fall backwards Itis safe to connect the string so that the clamps fixed on the wall are equal to or lower than the clamps fixed on the TV amp Untie the string before moving the TV English 4 1 UOIPEUUOJU 19YO GO Other Information If you have any questions about the TV first refer to this list If none of these troubleshooting tips apply please visit www samsung com then click on Support or contact the call centre listed on the back cover of this manual
46. e use the TV Speaker function O Audio Format option may differ depending on the broadcast 5 1ch Dolby digital sound is only available when connecting an external speaker through an optical cable HE AAC2 0 is available in New Zealand Audio Description not available in all locations digital channels only This function handles the Audio Stream for the AD Audio Description which is sent along with the Main audio from the broadcaster H Audio Description Off On Turn the audio description function on or off H Volume Adjust the audio description volume English 1 5 saumeoy olseg 20 Basic Features Auto Volume Off Normal Night To equalize the volume level on each channel set to Normal Em Night This mode provides an improved sound experience compared to Normal mode making almost no noise It is useful at night Speaker Select External speaker TV speaker A sound echo may occur due to a difference in decoding speed between the main speaker and the audio receiver In this case set the TV to External Speaker O When Speaker Select is set to External Speaker the volume and MUTE buttons will not operate and the sound settings will be limited O When Speaker Select is set to External Speaker you should use these settings TV Speaker Off External Speaker On amp When Speaker Select is set to TV Speaker you should use these settings TV Speaker On External Speaker
47. e disc menu of the DVD recorder will appear device_name INFO Shows the play menu of the connected device E g If a DVD recorder is connected the play menu of the DVD recorder will appear Stop Recording recorder Stops recording Receiver Sound is played through the receiver If more than one recording device is connected they are displayed as recorder and if only one recording device is connected it will be represented as device name English 33 sainjgay peoueApy vo Advanced Features Bl Setting Up Anynet H Setup Anynet HDMI CEC Off On To use the Anynet Function Anynet HDMI CEC must be set to On amp When the Anynet HDMI CEC function is disabled all the Anynet related operations are deactivated Auto Turn Off No Yes Setting an Anynet Device to turn off automatically when the TV is turned off amp The active source on the TV must be set to TV to use the Anynet function Dy Even if an external device is still recording it may turn off fi Switching between Anynet Devices 1 Anynet devices connected to the TV are listed O if you cannot find a device you want press the red button to refresh the list 2 Select a device and press the ENTER C button You can switch to the selected device amp Only when you set Anynet HDMI CEC to On in the Application menu the Device List menu appears e Switching to the selected device may take up to 2 minutes Y
48. e is displayed with other coloured information that can be selected in the same way To display the previous or next page press the corresponding coloured button Part Contents Part Contents A Selected page number D Date and time B Broadcasting channel identity E Text Current page number or G search indications 38 English Status information FASTEXT information Installing the Wall Mount i Assembling the Blanking Bracket When installing the TV onto a wall attach the Blanking Bracket into the part that connects to the stand as shown in the picture UOIPEUMOJU ABYIO GO Blanking bracket a t LR D Preparing before installing Wall Mount 46inch TV To install a wall mount from another manufacturer use the Holder Ring D Installing the Wall Mount Kit Wall mount items sold separately allow you to mount the TV on the wall For detailed information on installing the wall mount see the instructions provided with the Wall Mount items Contact a technician for assistance when installing the wall mount bracket Samsung Electronics is not responsible for any damage to the product or injury to yourself or others if you elect to install the TV on your own English 39 Other Information fl Wall Mount Kit Specifications VESA amp Wall mount kit is not supplied but sold separately Install your wall mount on a solid wall perpendicular to the floor Whe
49. e is not selected the Timer function does not operate correctly amp When there is only one photo file in the USB device the Slide Show will not play amp Ifa folder name is too long the folder cannot be selected amp Each USB you use is assigned its own folder When using more than one of the same type of USB make sure the folders assigned to each USB have different names Repeat Select Once Everyday Mon Fri Mon Sat Sat Sun or Manual to set at you convenience If you select Manual you can set up the day you want to activate the timer The v mark indicates the day is selected SO Auto Power Off available only when the TV is turned on by Timer The TV will be automatically turned off after 3 hours of being left idle to prevent overheating fl Locking Programs Security amp The PIN input screen appears before the setup screen Enter your 4 digit PIN the default of which is 0 0 0 0 Change the PIN using the Change PIN option H Child Lock Off On Lock channels in Channel Manager to prevent unauthorized users such as children from watching unsuitable programme Available only when the Input source is set to TV Em Parental Lock Prevent unauthorized users such as children from watching unsuitable programme with a user defined 4 digit PIN code Allow All Unlock all TV ratings The items of Parental Lock differs depending on the country English 1 7 sounjeey oiseg 0
50. enu E Edit Channel Name analogue channels only Assign your own channel name E Edit Channel Number digital channels only Edit the number by pressing the number buttons desired amp This feature is only available in Australia Singapore English 1 1 saumeoy olseqg 20 Basic Features il Other Features Channel Manager Option Menu in Channel Manager Set each channel using the Channel Manager menu options Lock Unlock Timer Viewing Sort Delete Select All Deselect All Option menu items may differ depending on the channel status 1 Select a channel and press the TOOLS button 2 Select a function and change its settings Em Lock Unlock Lock a channel so that the channel cannot be selected and viewed LO NOTE e This function is available only when the Child Lock is set to On e The PIN input screen appears Enter your 4 digit PIN the default of which is 0 0 0 0 Change the PIN using the Change PIN option m Timer Viewing You can set a desired channel to be displayed automatically at the intended time Set the current time first to use this function amp Whena digital channel is selected press the gt button to view the digital Programme E Sort analogue channels only This operation allows you to change the programme numbers of the stored channels This operation may be necessary after using the auto store m Delete You can delete a channel to display the channels
51. erminated by an abnormal situation such as disconnecting the HDMI cable or power cord or a power failure please repeat the device scan The TV programme cannot be recorded The TV sound is not output through the receiver Check whether the antenna jack on the recording device is properly connected Connect the optical cable between TV and the receiver English 3 5 sounjeej4 paduenpy vo Advanced Features a i About AllShare AllShare connects your TV and compatible Samsung mobile phones devices through a network On your TV you can view call arrivals SMS messages and schedules set on your mobile phones In addition you can play media contents including videos photos and music saved on your mobile phones or the other devices such as your PC by controlling them on the TV via the network Additionally you can use your TV for browsing web pages in your mobile phones amp For more information visit www samsung com or contact the Samsung call centre Mobile devices may need additional software installation For details refer to each device s user s guide D Setting Up AllShare Setup m Message On Off Enables or disables the message function for call arrivals SMS messages and schedules set on your mobile phones E Media On Off Enables or disables the media function When the media function is on it plays videos photos and music from a mobile phone or other device that supports A
52. han a PC such as your TV to the Internet If your Internet service provider requires an ID or assword to connect to the Internet your TV may not be able to connect to the Internet If this is the case you must enter your ID or password when connecting to the Internet The internet connection may fail because of a firewall problem If this is the case contact your Internet service provider If you cannot connect to the Internet even after you have followed the procedures of your Internet service provider please contact Samsung Electronics at 1 800 SAMSUNG English 25 sounjeej4 paduenpy 70 Advanced Features Enjoy photos music and or movie files saved on Mediablay MEDIA P a USB Mass Storage Class MSC device and or your PC WE sum IA Change Device D View Device C4 Enter 5 Return D Connecting a USB Device TV Side Panel 1 Turn on your TV 2 Connect a USB device containing photo music and or movie files to the USB 1 HDD or USB2 jack on the side or rear of the TV 3 When USB is connected to the TV popup window appears Then you can select Media Play eNi wan Connecting to the PC through network You can play pictures music and videos saved on your PC or on your TV through a network connection in the Media Play mode Ko If you use Media Play through saved file on your PC you should download PC Share Manager and users manual from www
53. ides the best sound for movies m Clear Voice Emphasizes voices over other sounds Amplify Increase the intensity of high frequency sound to allow a better listening experience for the hearing impaired Adjusting sound settings Equalizer Adjusts the sound mode m Balance L R Adjusts the balance between the right and left speaker HM 100HZz 300Hz 1kHz 3kHz 10kHz Bandwidth Adjustment Adjusts the level of specific bandwidth frequencies m Reset Resets the equalizer to its default settings D Sound Systems Etc Virtual Surround Off On This function provides a virtual 5 1 channel surround sound experience through a pair of speakers or headphones using HRTF Head Related Transfer Function technology A amp A If Speaker Select is set to External Speaker Virtual Surround is disabled Dialog Clarity Off On This function allows you to increase the intensity of a voice over background music or sound effects so that dialog can be heard more clearly when viewing a show Audio Language digital channels only Change the default value for audio languages amp The available language may differ depending on the broadcast Audio Format MPEG Dolby Digital 2 0 HE AAC2 0 digital channels only When sound is emitted from both the main speaker and the audio receiver a sound echo may occur due to the decoding speed difference between the main speaker and the audio receiver In this cas
54. injury due to electric shock Assembling the Cables Enclose the cables in the Cable tie so that the cables are not visible through the transparent stand Overly rigid or thick cables can damage input jacks for long term usage 40 English Anti Theft Kensington Lock The Kensington Lock is a device used to physically fix the system Jara bg when using it in a public place The appearance and locking method Ping Ring may differ from the illustration depending on the manufacturer Refer to TV Rear 1 0 the manual provided with the Kensington Lock for proper use PA Ff 9 SN Please find a R icon on the rear of the TV R A kensington slot is beside the fa icon sa ca 1 Insert the locking device into the Kensington slot on the LCD TV Ka Fa and turn it in the locking direction KO BA s 2 Connect the Kensington Lock cable lt Optional gt 3 Fix the Kensington Lock to a desk or a heavy stationary object The locking device has to be purchased separately amp The location of the Kensington Lock may be different depending on its model Securing the TV to the Wall Caution Pulling pushing or climbing onto the TV may cause the TV to fall In particular ensure that your A children do not hang over or destabilize the TV doing so may cause the TV to tip over resulting in serious injuries or death Follow all safety precautions provided on the included Safety Flyer For ad
55. k screen There is poor colour or brightness e Adjust the Picture options in the TV menu go to Picture mode Colour Brightness Sharpness e Adjust Energy Saving option in the TV menu go to MENU Picture ECO solution Energy Saving e Try resetting the picture to view the default picture settings go to MENU Picture Picture Reset There is a dotted line on the edge of the screen e If the picture size is set to Screen Fit change it to 16 9 P 14 e Change cable set top box resolution The picture is black and white e If you are using an AV composite input connect the video cable yellow to the Green jack of component input 1 on the TV When changing channels the picture freezes or is distorted or delayed e If connected with a cable box please try to reset the cable box Reconnect the AC cord and wait until the cable box reboots It may take up to 20 minutes e Set the output resolution of the cable box to 1080i or 720p Sound Quality First of all please perform the Sound Test to confirm that your TV audio is properly operating go to MENU Support Self Diagnosis Sound Test P 19 If the audio is OK the sound problem may caused by the source or signal There is no sound or the sound is too low at maximum volume e Please check the volume the of external device connected to your TV The picture is good but there is no sound e Set the Speaker Select option to TV spe
56. lap the Teletext mode with the current broadcasting screen store Store the Teletext pages size Display the double size letters on the upper half of the screen For the lower half of the screen press it again To display the normal screen press it once again E hold Hold the display on a given page if the selected page is linked with several secondary pages which follow on automatically To resume press it again mode Select the Teletext mode LIST FLOF If you press this button in the LIST mode the mode is switched into the List save mode In the List save mode you can save a Teletext page into list using the E9 store button sub page Display the available sub page The Teletext pages are organized according to six categories Teletext page page down Display the previous Teletext page index Display the index contents page at any time while you are viewing Teletext reveal Display the hidden text answers to quiz games for example To display the normal screen press it again EX cancel Display the current broadcast when searching for a page Colour buttons red green yellow blue If the FASTEXT system is used by a broadcasting company the different topics covered on a Teletext page are colour coded and can be selected by pressing the coloured buttons Press one of them corresponding to the required The pag
57. le in some locations p35 conan e Blanking Bracket e Cable tie e Holder Ring 4ea See separate guide for installing the stand Ex M4 X L12 e Stand 1EA e Guide Stand 1EA e Screws JEA Viewing the Control Panel The product colour and shape may vary depending on the model Remote control sensor Power Indicator SOURCE MENU voL vcHA I Speakers Power Turns the TV on or off Power Indicator Blinks and turns off when the power is on and lights up in standby mode SOURCE Ca Toggles between all the available input sources In the on screen menu use this button as you would use the ENTER C button on the remote control MENU Displays an on screen menu the OSD on screen display of your TV s features VOL Adjusts the volume In the OSD use the VOL buttons as you would use the lt and B buttons on the remote control V CHA Changes the channels In the OSD use the VW CH A buttons as you would use the V and A buttons on the remote control Remote control sensor Aim the remote control towards this spot on the TV Standby mode Do not leave your TV in standby mode for long periods of time when you are away on a holiday for example A small amount of electric power is still consumed even when the power button is turned off It is best to unplug the power code 4 English Viewing the Remote Control o amp This is a special remote
58. llShare E ScreenShare On Off Enables or disables ScreenShare accesses various contents from mobile phones or other ScreenShare supporting devices E TV name Sets the TV name so you can find it easily on a mobile device if you select User Input you can type on the TV using the OSK On Screen Keyboard Sr Setup Message m Media Screenshare C Select Return Exit 36 English Message Media ScreenShare Shows a list of mobile phones or connected devices which have been set up with this TV for using the Message Media or ScreenShare function The Media function is available in all mobile devices which support AllShare E Allowed Denied Allows Blocks the mobile phone m Delete Deletes the mobile phone from the list D This function only deletes the name of the mobile from the list If the deleted mobile device is turned on or trieds to connect to the TV it may appear on the list again Using the Message Function Using this function you view call arrivals SMS messages and schedules set on the mobile phone through the alarm window while watching TV LO NOTE e To disable the alarm window set Message to Off in Setup of AllShare If OK is selected or if OK is not selected after the message has appeared three times the message will be deleted The message is not deleted from the mobile phone The alarm window can be displayed while using some applications such as Media Play etc
59. long term use If mounting the TV to the wall we recommend using cables with 90 degree connectors You see small particles when you look closely at the edge of the frame of the TV This is part of the product s design and is not a defect The PIP menu is not available PIP functionality is only available when you are using a HDMI PC or components source The message Scramble signal or Weak Signal No Signal appears If you are using a CAM CARD CI Cl check that it is installed into the common interface slot If there is still a problem pull the CAM CARD out of the TV and insert it into the slot again You turned the TV off 45 minutes ago and it turned on again It is normal The TV operates the OTA Over The Aerial function itself to upgrade firmware downloaded whilst your watching TV There are recurrent picture sound issues Check and change the signal source A reaction may occur between the rubber cushion pads on the base stand and the top finish of some furniture To prevent this use felt pads on any surface of the TV that comes in direct contact with furniture amp This TFT LCD panel uses a panel consisting of sub pixels which require sophisticated technology to produce However there may be a few bright or dark pixels on the screen These pixels will have no impact on the performance of the product a Licence Ol DOLBY DIGITAL PLUS PULSE Manufactured u
60. mal PC is always shown on the source list regardless of whether a PC is connected The video is OK but there is no audio If you are using a HDMI connection check the audio output setting on your PC Network Connection Depending on Models Wireless network connection failed Samsung Wireless USB dongle is required to use a wireless network Make sure the Network Connection is set to Wireless Make sure the TV is be connected to a wireless IP sharer router Others The picture will not display in full screen HD channels will have black bars on either side of the screen when displaying upscaled SD 4 3 contents Black bars on the top and bottom will appear during movies that have aspect ratios different from your TV Adjust the picture size options on your external device or TV to full screen The remote control does not work Replace the remote control batteries with the poles in the right direction Clean the sensor s transmission window on the remote Try pointing the remote directly at the TV from 5 6 feet away The cable set top box remote control does not turn the TV on or off or adjust the volume A Not Supported Mode message appears Programme the Cable Set top box remote control to operate the TV Refer to the Cable Set user manual for the SAMSUNG TV code Check the supported resolution of the TV and adjust the external device s output resolution accordingly Refer
61. n Adjust each colour s red green blue brightness Reset Resets the White Balance to it s default settings E Flesh Tone Emphasize pink Flesh Tone E Edge Enhancement Off On Emphasize object boundaries Picture Options In Pc mode you can only make changes to the Colour Tone Size and Auto Protection Time Picture Options Colour Tone Normal gt Size gt 16 9 Digital Noise Filter Auto MPEG Noise Filter Auto HDMI Black Level Normal Film Mode Off Auto Protection Time Off Move Enter Return H Colour Tone Cool Normal Warm1 Warm2 amp Warm1 or Warm2 will be deactivated when the picture mode is Dynamic amp Settings can be adjusted and stored for each external device connected to an input on the TV English 1 3 saumeoy olseg 20 Em Size Your cable box satellite receiver Basic Features may have its own set of screen sizes as well However we highly recommend you use 16 9 mode most of the time PSIZE Auto Wide Automatically adjusts the picture size to the 16 9 aspect ratio This feature is only available in New Zealand Singapore 16 9 Adjusts the picture size to 16 9 for DVDs or wide broadcasting Wide Zoom Magpnifies the picture size more than 4 3 amp Adjusts the Position by using A V buttons Zoom Magnifies the 16 9 wide pictures vertically to fit the screen size amp Adjusts the Position or Size
62. n attaching to other building materials please contact your nearest dealer If installed on a ceiling or slanted wall it may fall and result in severe personal injury LO NOTE Standard dimensions for wall mount kits are shown in the table below When purchasing our wall mount kit a detailed installation manual and all parts necessary for assembly are provided Do not use screws longer than the standard dimension as they may cause damage to the inside of the TV set For wall mounts that do not comply with the VESA standard screw specifications the length of the screws may differ depending on their specifications Do not use screws that do not comply with the VESA standard screw specifications Do not fasten the screws too strongly this may damage the product or cause the product to fall leading to personal injury Samsung is not liable for these kinds of accidents Samsung is not liable for product damage or personal injury when a non VESA or non specified wall mount is used or the consumer fails to follow the product installation instructions Do not exceed 15 degrees tilt when mounting this TV Feel inches VESA Spec A B Standard Screw Quantity Family 75 X75 ae 100 X 100 M4 23 29 200 X 100 30 40 200 X 200 M6 Ree 46 55 400 X 400 57 65 600 X 400 M8 70 80 800 X 400 80 1400 X 800 A Do not install your Wall Mount Kit while your TV is turned on It may result in personal
63. nder licence from Dolby Laboratories Dolby and the double D symbol are trademarks of Dolby Laboratories 2 0 Digital Out Manufactured under license under U S Patent s 5 451 942 5 956 674 5 974 380 5 978 762 6 487 535 amp other U S and worldwide patents issued amp pending DTS and the Symbol are registered trademarks amp DTS 2 0 Digital Out and the DTS logos are trademarks of DTS Inc Product Includes software DTS Inc All Rights Reserved DivX Certified to play DivX video up to HD 1080p including premium content ABOUT DIVX VIDEO DivX is a digital video format created by DivX Inc This is an official DivX Certified device that plays DivX video Visit www divx com for more information and software tools to convert your files into DivX video ABOUT DIVX VIDEO ON DEMAND This DivX Certified device must be registered in order to play DivX Video on Demand VOD content To generate the registration code locate the DivX VOD section in the device setup menu Go to vod divx com with this code to complete the registration process and learn more about DivX VOD Pat 7 295 673 7 460 688 7 519 274 Open source license notice 44 English n the case of using open source software Open Source Licenses are available on the product menu Specifications Panel native 1920 x 1080 60 Hz Environmental Considerations Operating Temperature 10 C to 40 C
64. o the TV s USB port USB HUB are not supported LAN Cable DIGITAL AUDIO Ol OPTICAL English 23 Advanced Features Network Setup PBC WPS How to set up automatically To set up the wireless connection automatically follow these How to set up using PBC WPS 1 Connect your TV to your LAN as described in the previous section 2 2 Turn on your TV press the MENU button on your remote use the AorV button to select Setup and then press the ENTER C button 3 Use the AorV button to select Network in the Setup 3 menu and then press the ENTER C button Onthe Network screen select Network Type 5 Set Network Type to Wireless 4 6 Select Network Setup The Network Setup screen appears Network Setup Select a network Not Selected gt Internet Protocol Setup Auto 5 IP Address nhl i Subnet Mask Efl 6 Gateway UU DNS Auto DNS Server EE Move Enter 9 Return 7 Press the Red button on your remote 8 Press the PBC WPS button on your router within 2 minutes Your TV player automatically acquires all the network setting values it needs and connects to your network 9 After the network connection is set up press the RETURN button to exit the Network Setup screen Network Setup Auto 7 Most wireless networks have an optional security system that requires devices that access the network to transmit an encrypted security code called an Access or Security Key The
65. o view information for other channels If you want to move to the currently selected channel press the ENTER C button abel 18 11 Thu 6 Jan PINAG Life On Venus Avenue 18 00 6 00 pam Unclassified Watch 1 5 No Detaild Information Information Planning Your Viewing Guide Australia amp Singapore Only GUIDE The EPG Electronic Programme Guide information is provided by broadcasters Using programme schedules provided by broadcasters you can specify programmes you want to watch in advance so that the channel automatically changes to the selected programme channel at the specified time Programme entries may appear blank or out of date depending on a channel status Using Channel View DTV Air 800 five Home and Away 18 00 18 30 Drama Dani is devastated when scott makes clear his views on marriage Today 18 00 19 00 a 27 Discovery American Chopper 28 DiscoveryH amp L Programmes resume at 06 00 800 five Home and Family Affairs Fiv Dark Angel 24 price drop tv No Information 16 ee QVC Selection v6 R4DTT No Information 19 00 20 00 Tine Team A View Mode 24 Hours Ch Mode Information Page C Watch English 9 s n e y Iseg 20 Using Scheduled View DTV Air 800 five Family Affairs 18 00 18 30 Drama Tanya confesses all to a stunned Babs Conrad is anxious to hear 18 30 Today 19 15 Today
66. one This feature is only available in Australia This function is only available when Clock Mode is set to Auto SI Depending on the broadcast station and signal the auto time may not be set correctly If this occurs set the time manually D Using the Sleep Timer E Sleep Timer Automatically shuts off the TV after a preset period of time 30 60 90 120 150 and 180 minutes amp Q To cancel Sleep Timer select Off fl Setting the On Off Timer E Timer 1 Timer 2 Timer 3 Three different on off timer settings can be made You must set the clock first On Time Off Time Volume Source Antenna Channel Sun Mon Tue Wed Thu Fri Sat Adjust lt gt Move Enter 5 Return On Time Off Time Set the hour minute and activate inactivate To activate timer with the setting you ve chosen set to Activate Volume Set the desired volume level Source Select TV or USB content to be played when the TV is turned on automatically USB can be selected only when a USB device is connected to the TV Antenna when the Source is set to TV Select ATV or DTV Channel when the Source is set to TV Select the desired channel Contents when the Source is set to USB Select a folder in the USB device containing music or photo files to be played when the TV is turned on automatically amp Q If there is no music file on the USB device or the folder containing a music fil
67. ou cannot cancel the operation during the switching operation e If you have selected external input mode by pressing the SOURCE button you cannot use the Anynet function Make sure to switch to an Anynet device by using the Device List al Recording You can make a recording of a TV programme using a Samsung recorder 1 Select Recording amp When there are more than two recording devices e When multiple recording devices are connected the recording devices are listed Select one recording device in the Device List Di When the recording device is not displayed select Device List and press the Red button to search devices 2 Press the EXIT button to exit You can record the source streams by selecting Recording device name SI Pressing the REC button will record whatever you are currently watching If you are watching video from another device the video from the device is recorded Q Before recording check whether the antenna jack is properly connected to the recording device To properly connect an antenna to a recording device refer to the recording device s users manual Listening through a Receiver You can listen to sound through a receiver i e Home Theatre instead of the TV speaker 1 Select Receiver and set to On 2 Press the EXIT button to exit O If your receiver supports audio only it may not appear in the device list amp The receiver will work when you have properly connected the optical in
68. peoueApy vo Advanced Features Videos Music Photos Play Option menu Option menu Operations Videos Music Photos Title You can move the other file directly v Repeat Mode You can play movie files repeatedly v v Picture Size Mode1 3 8 Mode2 Original You can adjust the picture size for preference v Picture Setting You can adjust the picture setting P 12 13 14 15 v v Sound Setting You can adjust the sound setting P 15 16 v Jv v Subtitle Setting You can play the video with Subtitle This function only works if the 7 subtitles are the same file name as the video You can enjoy video in one of supported languages as required Audio The function is only enabled when stream type files which support v multiple audio formats are played Stop Slide Show Start Slide Show You can start or stop a Slide Show PA Slide Show Speed You can select the slide show speed during the slide show v Background Music You can set and select background music when watching a Slide 7 Show Zoom You can zoom into images in full screen mode J Rotate You can rotate images in full screen mode v Information You can see detailed information about the played file v v v Settings Using the Settings Menu H Cont movie play help Resume play On Off Select to display the help pop up message for continuous movie playback m Get the DivX VOD registration code Shows the registration
69. r shrinks a channel number Yellow Select Select desired channels and press the Yellow button to set all the selected channels at the same time The YW mark appears to the left of the selected channels BBlue Sort Change the list ordered by channel name or channel number O Page Move to next or previous page 4 Tools Displays the Channel Manager option menu The Options menus may differ depending on the situation Channel Status Display Icons Icons Operations A An Analogue channel v A channel selected Y A channel set as a Favourite C5 A programme currently being broadcast a A locked channel A reserved programme fl Using Favourite Channels My Channels in Channel Manager Shows all favourite channels E Edit My Channels You can set the selected channels to desired my channels group A The Y symbol will be displayed and the channel will be set as a my channel 1 Select a channel and press the TOOLS button 2 Add or delete a channel in the my channel groups you want among 1 2 3 and 4 One or more groups can be selected 3 After you have changed the settings the channel list for each group can be viewed in My Channels 1 1futech 24ore tv Edit My Channels Lock Timer Viewing Edit Channel Name Sort Delete Radio Data Other 23 Analogue gjeuueyD Coming Soon Discovery Channel Menu Retuning channels
70. rformed at selected time Since the power of the unit is turned on internally the screen Curentverion 2010 01 18 000001 may be turned on slightly for the LCD product This si phenomenon may continue for more than 1 hour until the software upgrade is complete By USB gt E Alternative Software backup Displays the Software By Online version downloaded through By Online During the By Channel software upgrading When the Upgrade will discontinue Standby Mode Upgrade 2 hours later from last step this function be activated Alternative Software _ HD Connection Guide Refer to this information when connecting external devices to the TV Contact Samsung View this information when your TV does not work properly or when you want to upgrade the software You can find information regarding our call centres and how to download products and software English 19 Advanced Features Using an HDMI DVI Cable a D sub Cable i PC DVI AUDIO IN Display Modes D Sub and HDMI DVI Input Optimal resolution is 1920 X 1080 60 Hz Mode Resolution Smee Vertical Frequency Hz Pixel Clock Frequency MHZz Sync Polarity H V Ba 640 x 350 31 469 70 086 25 175 720 x 400 31 469 70 087 28 322 l4 640 x 480 35 000 66 667 30 240 WA MAG 832 x 624 49 726 74 551 57 284 PA 1152 x 870 68 681 75 062 100 000 720x576 35 910 59 950 32 750 Te
71. rn off after 10 15 minutes if there is no signal There is picture Video Check cable connections remove and reconnect all cables connected to the TV and external devices Set your external devices Cable Set top Box DVD Blu ray etc video outputs to match the connections to the TV input For example if an external device s output is HDMI it should be connect to an HDMI input on the TV Make sure your connected devices are powered on Be sure to select the TV s correct source by pressing the SOURCE button on the TV remote RF Cable Antenna Connection The TV is not receiving all channels Make sure the Antenna cable is connected securely Please try Plug amp Play Initial setup to add available channels to the channel list Go to MENU Setup Plug amp Play Initial setup and wait for all available channels to be stored Verify the Antenna is positioned correctly The picture is distorted macroblock error small block dots pixelization Compression of video contents may cause picture distortion especially with fast moving pictures such as sports and action movies A low signal can cause picture distortion This is not a TV issue PC Connection A Not Supported Mode message appears Set your PC s output resolution and frequency so they match the resolutions supported by the TV P 20 PC is always shown on the source list even if a PC is not connected This is nor
72. s appears Press Allow button then you can use Media function on that device Unknown Device 0 is requesting that the media file be allowed to play If you wish to allow the media file to be played at your device please press Allow otherwise press Deny You can also change the setting or resetting of this feature at AllShare Setup Warning Please note that if your device is connected to unsecured or unfamiliar network unwanted or inappropriate contents might be played If you are not sure about the network s identity or content s appropriateness we strongly recommend that you do not Allow the request to play To turn off the media contents transmission from the mobile phone set Media to Off in the AllShare setup Contents may not be played on your TV depending on their resolution and format The ENTERC and 4 gt buttons may not work depending on the type of media content e Using the mobile device you can control the media playing For details refer to each mobile s user s guide When you want to play media contents from your PC select the PC icon on the main display of AllShare Then the TV s Media Play menu automatically changes For more detail information refer to Media Play P 27 Using ScreenShare Function Using ScreenShare you can browse various web contents provided by the mobile phone For example the image below displays an access page for contents on a mobile You
73. sound after connecting an HDMI cable check the HDMI version of the external device If you suspect the version is older than 1 3 contact the provider of the device to confirm the HDMI version and request an upgrade It is recommended you purchase an HDMI certified cable Otherwise the screen may appear blank or a connection error may occur Using a Component up to 1080p or Audio Video 480i only Cable Available devices VCR DVD Blu ray player cable box STB satellite receiver Va N j JE IL Red Blue Green Yelow Red White SE IEE AUDIO OUT _ COMPONENT OUT R AUDIO L N English 7 suondauu09 Z0 Connections Using an Optical or Audio Cable Connection Available devices digital audio system amplifier DVD home theatre DIGITAL AUDIO OUT OPTICAL amp DIGITAL AUDIO OUT OPTICAL e When a digital audio system is connected to the DIGITAL AUDIO OUT OPTICAL jack decrease the volume of both the TV and the system e 5 1 CH channel audio is available when the TV is connected to an external device supporting 5 1 CH e When the receiver home theatre is set to on you can hear sound output from the TV s optical jack When the TV is receiving a DTV signal the TV will send 5 1 CH sound to the home theatre receiver When the source is a digital component such as a DVD Blu ray player cable box
74. ssless audio e H 263 is not supported e WMA sampling rate 22050Hz mono is not supported e GMC 2 over is not support English 29 Advanced Features Playing movie file continuously Resume Play If you exit the playing Videos function it can be played later from the point where it was stopped 1 Select the movie file you want to play continuously by pressing the lt or B button to select it from the file list section gt 00 04 03 00 07 38 2 Press the gt Play ENTER C button 3 Select Play Continuously Resume Play by pressing the Blue button The Movie will begin to play from where it was stopped amp The Blue button is available when resuming play Ifthe Cont movie play help function is set to On in the on Settings menu a pop up message will appear when you i O ENE resume play a movie file si BU Movie 01 avi Music Playing a Music 1 Press the lt or B button to select Music then press the ENTER C button in the Media Play menu 2 Press the UB A V button to select the desired Music in the file g H Loveyou list Mise 3 Press the ENTER C button or gt Play button 20 During music playback you can search using and B button M 4d REW and gt gt FF buttons do not function during play Q Only displays the files with MP3 and PCM file extension Other file extensions are not displayed even if they are saved on the same USB devi
75. teps 1 through 6 in the How to set up using PBC WPS P 24 2 Press the V button to select Internet Protocol Setup and then press ENTER C button Press the A or V button to select Manual and then press ENTER C button 3 Press the V button to go to the first entry field IP Address 4 Use the number buttons to enter numbers 5 When done with each field use the B button to move successively to the next field You can also use the other arrow buttons to move up down and back 6 Enter the IP Address Subnet Mask and Gateway values 7 Press the A or V button to go to DNS 8 Press the V button to go to the first DNS entry field Enter the numbers as above 9 When done press the A button to go to Select a Network Select your network and then press ENTER C button 10 Go to Step 4 in the How to set up automatically P 24 and follow the directions from that point on If Your TV Fails to Connect to the Internet Your TV may not be able to connect to the Internet because your ISP has permanently registered the MAC address a unique identifying number of your PC or modem which it then authenticates each time you connect to the Internet as a way of preventing unauthorized access As your TV has a different MAC address your ISP can not authenticate its MAC address and your TV can not connect To resolve this problem ask your ISP about the procedures required to connect devices other t
76. to the resolution settings on page 20 of this manual There is a plastic smell from the TV This smell is normal and will dissipate over time The TV Signal Information is unavailable in the Self Diagnostic Test menu This function is only available with digital channels from an Antenna RF Coax connection P 19 The TV is tilted to the side Remove the base stand from the TV and reassemble it English 43 UOIFEUMOJU ABYIO GO Other Information Issues Solutions and Explanations There are difficulties assembling the stand base Make sure the TV is placed on a flat surface If you can not remove the screws from the TV unnecessary use a magnetized screw driver The channel menu is greyed out unavailable The Channel menu is only available when the TV source is selected Your settings are lost after 30 minutes or every time the TV is turned off If the TV is in the Store Demo mode it will reset audio and picture settings every 30 minutes Change the settings from Store Demo mode to Home Use mode in the Plug amp Play Initial setup procedure Press the SOURCE button to select TV mode and go to MENU Setup Plug amp Play Initial setup gt ENTER C You have intermittent loss of audio or video Check the cable connections and reconnect them Loss of audio or video can be caused by using overly rigid or thick cables Make sure the cables are flexible enough for
77. tton and select Play Selected Contents gt BP Videos Movie 01 avi 2 files selected 1 1 Page Jan 10 2010 E o OF aai Wi Movie 05 avi Jan 10 2010 4 a W Select I Sorting 7 Tools Playing the video music photo file group 1 While a file list is displayed move to the any file in desired group 2 Press the TOOLS button and select Play Current Group Media Play Additional Function Sorting the file list Press the blue button in the file list to sort the files Category Operations Videos Music Photos BD Basic View It shows whole folder You can view the photo by selecting the folder v Jv v Title It sorts and displays the file title in Symbol Number Alphabet Special order PA v v It sorts and displays the file by preference You can change the file mn Preference preference in the file list section using the green button J KG S Latest Date It sorts and shows files by latest date v v sg Earliest Date It sorts and shows files by earliest date v v Artist It sorts the music file by artist in alphabetical Q Album It sorts the music file by album in alphabetical order v E3 Genre It sorts music files by the genre It sorts music files by the mood You can change the music mood Mood Information f Monthl It sorts and shows photo files by month It sorts only by month from 7 y January to December regardless of year English 3 1 sainjgay
78. turn On the Network screen select Network Type 5 Set Network Type to Wired 6 Select Network Setup The Network Setup screen appears Network Setup Internet Protocol Setup Auto gt ddress JUNE JUNE BEE DNS Auto DNS Server nhl Move Enter 9 Return 7 Set Internet Protocol Setup to Auto 8 Auto acquires and enters the needed Internet values automatically 9 Wait two minutes and then press the RETURN button on your remote 10 If the Network Function has not acquired the network connection values go to the directions for Manual 22 English Network Setup Manual Use the Manual Network Setup when connecting your TV to a network that requires a Static IP address Getting the Network Connection Values To get the Network connection values on most Windows computers follow these steps 1 Right click the Network icon on the bottom right of the screen 2 In the pop up menu that appears click Status 3 On the dialog that appears click the Support tab 4 On the Support Tab click the Details button The Network connection values are displayed How to set up manually To set up your TV s cable network connection manually follow these steps 1 Follow Steps 1 through 6 in the How to set up automatically procedure 2 Set Internet Protocol Setup to Manual 3 Press the V button on your remote to go to the first entry field 4 Enter the IP Address
79. vi File List Section H You can confirm the files and Jan 10 2010 groups that is sorted by each i category Movie 04 avi Movie 08 avi he option menu FF button file list can move to next or previous page C button in the Media Play menu 2 Press the UB A V button to select the desired video in the file list 3 Press the ENTER C button or gt Play button The selected file is displayed on the top with its playing time If video time information is unknown the file does not display any information During playing the video you can search using the lt and B button In this mode you can enjoy movie clips contained on a Game but you cannot play the Game itself e Supported Subtitle Formats gt 00 04 03 00 07 38 Video01 avi Name File extension Format MPEG 4 time based text ttxt XML SAMI smi HTML SubRip srt string based SubViewer Sub string based Micro DVD Sub or txt string based 28 English Devicename G Pause 4 gt Jump gl Tools 9 Retum e Supported Video Formats 2 File Extention Container Video Codec Resolution plane ete Bilirato Audio Codec gt fps Mbsp 2 Divx 3 11 4 x 5 1 6 0 1920x1080 6 30 8 S savi Avi XviD 1920x1080 6 30 8 MP3 AC3 LPCM A mkv MKV H 264 BP MP HP 1920x1080 6 30 25 ADPCM DTS Core T MPEG4 SP ASP 1920x108
80. will be highlighted PC always stay activated 8 English Basic Features Before using the TV follow the steps below to learn how to navigate the menu and select and adjust different functions MENU button Displays the main on screen menu ENTER C4 Direction button Move the cursor and select an item Confirm the setting RETURN button Returns to the previous menu EXIT button Exits the on screen menu oo 00 How to Operate the OSD On Screen Display The access step may differ depending on the selected menu The main menu options appears on the screen 1 MENU Picture Sound Channel Setup Input Application Support Select an icon with the A or V button Press ENTERC 4 to access the sub menu Select the desired submenu with the A or V button Adjust the value of an item with the lt or gt button The adjustment in the OSD may differ depending on the selected menu Press ENTER C to complete the configuration Press EXIT A V ENTERC A V lt gt ENTERC NO O AORN EXIT Using the INFO button Now amp Next guide The display identifies the current channel and the status of certain audio video settings The Now amp Next guide shows daily TV programme information for each channel according to the broadcasting time e Scroll lt gt to view information for a desired programme while watching the current channel e Scroll A V t
81. you want H Select All Deselect All Select all the channels or deselect all the selected channels in the channel manager Scheduled in Channel Manager You can view modify or delete a show you have reserved to watch H Change Info Change a show you have reserved to watch H Cancel Schedules Cancel a show you have reserved to watch Em Information Display a show you have reserved to watch You can also change the reservation information m Select All Deselect All Select or deselect all reserved programmes Channel List You can see all the channels searched 1 2 English Channel List Transfer Imports or exports the channel map You should connect a USB storage to use this function amp The PIN number input screen appears Enter your 4 digit PIN number SO The default PIN number of a new TV set is 0 0 0 0 E Import from USB Import channel list from USB Em Export to USB Export channel list to USB Edit Channel Number Disable Enable New Zealand only When this option is enabled you can edit channel number But you cannot update channel information Fine Tune analogue channels only If the signal is weak or distorted fine tune the channel manually amp Fine tuned channels are marked with an asterisk To reset the fine tuning select Reset J Changing the Preset Picture Mode Mode Select your preferred picture type Em Dynamic Suitable for a

Samsung LA40C550J1M User Manual

Contents

Download Pdf Manuals

Related Search

Related Contents