Home

Samsung Series 5 50inch (PS50B550) User Manual

1. HDMI 1 3 Cable HDMI 1 3 Cable HDMI 1 3 Cable Connect the HDMI IN 1 HDMI IN 2 DVI HDMI IN 3 or HDMI IN 4 jack on the TV and the HDMI OUT jack of the corresponding Anynett device using an HDMI cable Connect the HDMI IN jack of the home theater and the HDMI OUT jack of the corresponding Anynet device using an HDMI cable Connect the Optical cable between the DIGITAL AUDIO OUT OPTICAL jack on your TV and the Digital Audio Input on the Home Theater When following the connection above the Optical jack only outputs 2 channel audio You will only hear sound from the Home Theater s Front Left and Right speakers and the subwoofer If you want to hear 5 1 channel audio connect the Digital Audio Out Optical jack on the DVD player or Cable Satellite Box ie Anynet Device 1 or 2 directly to the Amplifier or Home Theater not the TV Connect only one Home Theater You can connect an Anynet device using the HDMI 1 3 cable Some HDMI cables may not support Anynett functions Anynett works when the AV device supporting Anynett is in the Standby or On status Anynett supports up to 12 AV devices in total Note that you can connect up to 3 devices of the same type English 34 Setting Up Anynet The following settings help set the Anynet functions al Press the TOOLS button to display Tools menu d Scanning and Switching between Anynet Device
2. A RO A A AA AAL AARA A A AAA A A Digital TV DVB T Notice 1 Functionalities related to Digital TV DVB are only available in countries areas where DVB T MPEG2 and MPEG4 AVC digital terrestrial signals are broadcasted or where you have access to a compatible DVB C MPEG2 and MPEG4 AAC cable TV service Please check with your local dealer the possibility to receive DVB T or DVB C signal 2 DVB Tis the DVB European consortium standard for the broadcast transmission of digital terrestrial television and DVB C is that for the broadcast transmission of digital TV over cable However some differentiated features like EPG Electric Program Guide VOD Video on Demand and so on are not included in this specification So they cannot be supported at this moment 3 Although this TV set meets the latest DVB T and DVB C standards August 2008 the compatibility with future DVB T digital terrestrial and DVB C digital cable broadcasts cannot be guaranteed i 4 Some cable TV providers may charge an additional fee for such a service and you may be required to agree to terms and conditions of their business 5 Some Digital TV functions might be unavailable in some countries or regions and DVB C might not work correctly with all l providers
3. This function is active only when the external input connects to HDMI RGB signals 1080 Full HD Motion Demo Off On Samsung new generation PDP panels deliver stunning Full HD motion clarity when viewing fast action sports movies and games This function is not available in PC Game or Media Play mode Film Mode You can optimize the picture mode for watching movies e Off Turn the film mode function off Auto1 Automatically adjusts the picture for the best quality when watching a film Auto2 Automatically optimizes the video text when watching a film Film Mode is supported in TV AV COMPONENT 480i 1080i and HDMI 480i 1080i Film Mode is not supported in DTV channel with resolution 576p 720p Blue Only Mode Off On This function is for AV device measurement experts This function displays the blue signal only by removing the red and green signals from the video signal so as to provide a Blue Filter effect that is used to adjust the Color and Tint of video equipment such as DVD players Home Theaters etc Blue Only Mode is available when the picture mode is set to Movie or Standard Screen Burn Protection Configures the Screen Burn Protection Options to prevent and reduce pixel burn When an image remains in one position too long it may cause a permanent burn on the screen Pixel Shift To reduce the possibility of screen burn this unit is equipped with screen burn prevention technology This t
4. Picture is distorted macroblock small pictures such as sports and action movies block dots pixelization Low signal level can cause picture distortion This is not a TV issue Have the antenna accessed Wrong or missing color with Make sure the Component cables are connected to the correct jacks Component connection Incorrect or loose connections may cause color problems or the screen will be blank Adjust Picture options in the TV menu Picture Mode Colour Brightness Sharpness Poor color or brightness Adjust Energy Saving option in Setup menu Try picture reset to view the default picture setting Go to MENU Picture Picture Reset If picture size is set to Just scan change to 16 9 Dotted line on the edge of screen Change cable satellite box resolution Picture is black and white with AV Composite input only Confirm Composite yellow cable is in yellow jack in source as well as TV Picture freezes or is distorted when f connected with cable set top box please try to reset cable box reconnect AC cord changing channels or picture is and wait until cable box reboots It may take up to 20 minutes delayed Set output resolution of cable box to 1080i or 720p Sound Quality First of all please perform the Sound Test to confirm that your TV audio is properly operating Go to MENU Support Self Diagnosis Sound Test If the audio is OK the sound problem may cau
5. is a transaction transferring control of an organization or substantially all assets of one or subdividing an organization or merging organizations If propagation of a covered work results from an entity transaction each party to that transaction who receives a copy of the work also receives whatever licenses to the work the party s predecessor in interest had or could give under the previous paragraph plus a right to possession of the You may not impose any further restrictions on the exercise of the rights granted or affirmed under this License For example you may not impose a license fee royalty or other charge for exercise of rights granted under this License and you may not initiate litigation including a cross claim or counterclaim in a lawsuit alleging that any patent claim is infringed by making using selling offering for sale or importing the Program or any portion of it Patents A contributor is a copyright holder who authorizes use under this License of the Program or a work on which the Program is based The work thus licensed is called the contributor s contributor version A contributor s essential patent claims are all patent claims owned or controlled by the contributor whether already acquired or hereafter acquired that would be infringed by some manner permitted by this License of making using or selling its contributor version but do not include claims that would be infringed only as a consequence o
6. Audio Description The sound settings can be adjusted to suit your personal preferences ups m Speaker Select TV Speaker Mode You can select a sound mode to suit your personal preferences Balance Controls the balance between the right and left speakers e 100Hz 300Hz 1KHz 3KHz 10KHz Bandwidth Adjustment To adjust the level of different bandwidth frequencies Reset Resets the equalizer settings to the default values Q SRS TruSurround HD Off On SRS TruSurround HD is the combined technology of TruSurround and FOCUS TruBass SRS TruSurround HD is down mixing technology that makes the Surround Sound effect of virtual 5 1 channel via two speakers This function provide not only rich deep bass at a low pitched sound but also improve the resolution at a high pitched sound al Press the TOOLS button to display Tools menu You can also set the SRS TruSurround HD by selecting Tools SRS TS HD SRS 0 TruSurround HD SRS and the symbol are trademarks of SRS Labs Inc TruSurround HD technology is incorporated under license from SRS Labs Inc D BG I T AL 4 Audio Language only digital channel You can change the default value for audio languages Displays the language information for the incoming stream You can only select the language among the actual languages being broadcast 4 Audio Format MPEG Dolby Digital only digital channel When sound is emitted from both the main speaker an
7. Select Music File If you set Background Music to On you can select a music file Picture Setting Sound Setting Refer to page 33 Information The photo file information is displayed Remove Safely You can remove the device safely from the TV English 30 Using and Sorting the Music List You can sort music files in the Music List by a particular standard 1 Press the MEDIA P button on the remote control to display the Media Play menu 2 Press the lt or gt button to select Music then press the ENTER CS button 3 Press the ENTERC S button to start playing music in the order selected by the user The information of the music files is automatically set Carol Kidd If there is no title information for a music file the filename is displayed a Pop When Dream LS USB W Device Select 3 Tools 5 Return OQ Music List Tools Menu Play Current Group You can only play music files in the currently selected sorting group Information The music file information including the name the size the date modified and the path is displayed Alternatively select a music file from the music list and press the INFO button to view the information Remove Safely You can remove the device safely from the TV om USB Hi Device Select J Tools Return English 31 Playing a Music Q Playing a music file 1 Pressing the lt or gt button to select a music file to be played 2 Press the P
8. You can also change the reservation information Select All Deselect All You can select or deselect all channels in the channel list English 14 Picture Control Changing the Picture Settings OO Mode You can select the type of picture which best corresponds to your viewing requirements Dynamic Selects the picture for high definition in a bright room Mode Standard gt Standard Selects the picture for the optimum display in a normal environment E z ell Lig 2 a _ _ _ eeeeeeeeeeeeee v Eco Selects the picture for optimum and eye comfortable display BN me Movie Selects the picture for viewing movies in a dark room Brightness LAB Xl Press the TOOLS button to display Tools menu iini 3 You can also set the picture mode by selecting Tools Picture Mode a Tint G R G50 R50 Q Cell Light Contrast Brightness Sharpness Colour Tint G R Advanced Settings Your television has several setting options that allow you to control the picture quality SS Q Advanced Setting Cell Light Adjusts the pixel brightness Contrast Adjusts the contrast level of the picture Brightness Adjusts the brightness level of the picture Sharpness Adjusts the edge definition of the picture Colour Adjusts Colour saturation of the picture Tint G R Adjusts the Colour tint of the picture Select a picture mode to be adjusted first The adjusted values are saved for each pictur
9. Sets the TV to medium energy saving mode High Sets the TV to high energy saving mode al Press the TOOLS button to display Tools menu You can also set the energy saving option by selecting Tools Energy Saving English 23 Setting the Time d Ce fe Clock Setting the clock is necessary in order to use the various timer features of the TV dioi f The current time will appear every time you press the INFO button 8 UU If you disconnect the power cord you have to set the clock again no ecane Mode Child Lock On Clock Mode Change PIN You can set up the current time manually or automatically ig MEE Auto Set the current time automatically using the time from the digital broadcast E E e Manual Set the current time to a manually specified time Preference Clock Set You can set the current time manually TUS Set up this item when you have set Clock Mode to Manual Clock Set You can set the Day Month Year Hour Minute directly by pressing the number Timezone buttons on the remote control Time Zone You can select your time zone This function is only available when Clock Mode is set to Auto Depending on the broadcast station and signal the auto time may not be set correctly If this occurs set the time manually The Antenna or cable must be connected in order to set the time automatically Move sS Enter S Return Sleep Timer Off 30 min 60 min 90 min 120 min 150 min 180 min
10. This page ts intentionally left blank m Contact SAMSUNG WORLDWIDE If you have any questions or comments relating to Samsung products please contact the SAMSUNG customer care centre Country Customer Care Centre 23 Web Site AUSTRALIA 1300 362 603 www samsung com au CHINA a er www samsung com cn www samsung com hk HONG KONG 3698 4698 www samsung com hk_en 3030 8282 INDIA 1800 110011 www samsung com in 1800 3000 8282 INDONESIA 0800 112 8888 www samsung com id JAPAN 0120 327 527 www samsung com jp MALAYSIA 1800 88 9999 www samsung com my New zealand 0800 SAMSUNG 0800 726 786 www samsung com nz 1 800 10 SAMSUNG 726 7864 1 800 3 SAMSUNG 726 7864 PHILIPPINES 1 800 8 SAMSUNG 726 7864 www samsung com ph 02 5805777 SINGAPORE 1800 SAMSUNG 726 7864 www samsung com sg SOUTH AFRICA 0860 SAMSUNG 726 7864 www samsung com za TAIWAN 0800 329 999 www samsung com tw THAILAND ee eae www samsung com th Turkey 444 TT 11 www samsung com tr U A E cue E 726 7864 www samsung com ae VIETNAM 1 800 588 889 www samsung com vn BN68 02064A 01
11. copyright holder is reinstated a provisionally unless and until the copyright holder explicitly and finally terminates your license and b permanently if the copyright holder fails to notify you of the violation by some reasonable means prior to 60 days after the cessation Moreover your license from a particular copyright holder is reinstated permanently if the copyright holder notifies you of the violation by some reasonable means this is the first time you have received notice of violation of this License for any work from that copyright holder and you cure the violation prior to 30 days after your receipt of the notice Termination of your rights under this section does not terminate the licenses of parties who have received copies or rights from you under this License If your rights have been terminated and not permanently reinstated you do not qualify to receive new licenses for the same material under section 10 English 53 10 11 12 13 14 Acceptance Not Required for Having Copies You are not required to accept this License in order to receive or run a copy of the Program Ancillary propagation of a covered work occurring solely as a consequence of using peer to peer transmission to receive a copy likewise does not require acceptance However nothing other than this License grants you permission to propagate or modify any covered work These actions infringe copyright if you do not accept this Licen
12. 6 For more information please contact your local Samsung customer care centre a a er a a a a a a a a a a a a i a a a a a a a E a a a a G apaa a a A a E a a a ee 2009 Samsung Electronics Co Ltd All rights reserved English 2 Contents E Checking PANS oii oie terete oe eee ets dee eee 4 m Connecting a USB Device 27 m Using the Stand Base ssseeeeernnne 4 m Using the Media Play Function eeessssss 20 m Assembling the Cables 4 a Using and Sorting PIoIoLISL isnt aeinctt nain RR t Rhe 29 m Viewing the Control Panel sseeeeneee 5 m Viewing a Photo or Slide Show ssessssese 30 m Viewing the Connection Panel eene 6 m Using and Sorting the Music List sesssessess 31 m Remote Control cccccsccsssessrecsseesseecsneeserscsesssessnesssseeeeees T m Playing a ISIC iaGccanorcenteatessnsen d pM VERHUNG CH pU D MEM ME bh 32 m Installing Batteries in the Remote Control 8 m Picture Music Settings Using Media Play 39 a Switching On and OIL ascen o mne ttutt ner n tnis d ra name nta 8 m Using the Setup Menu sseeneeennnnnnn 33 m Placing Your Television in Standby Mode 8 w Viewing the Menus ccc 9 m Using the TOOLS Button uscire se tok eit Peces 9 m Connecting Anynet Devi
13. 950 32 750 1152 x 864 53 783 59 959 81 750 VESA CVT 1280 x 720 44 772 59 855 74 500 1280 x 720 56 456 74 777 95 750 1280 x 960 75 231 74 857 130 000 640 x 480 31 469 25 175 640 x 480 37 861 31 500 640 x 480 37 500 31 500 800 x 600 37 879 40 000 F 800 x 600 48 077 50 000 800 x 600 46 875 49 500 1024 x 768 48 363 65 000 1024 x 768 56 476 75 000 1024 x 768 60 023 78 750 VESA DMT 1152 x 864 67 500 108 000 1280 x 800 49 702 83 500 1280 x 800 62 795 106 500 1280 x 960 60 000 108 000 1280 x 1024 63 981 108 000 1280 x 1024 79 976 135 000 1360 x 768 47 712 85 500 1440 x 900 55 935 106 500 1440 x 900 70 635 136 750 1680 x 1050 65 290 146 250 1280 x 720 52 500 70 000 89 040 VERA GIE 1280 x 1024 74 620 70 000 128 943 When using an HDMI DVI cable connection you must use the HDMI IN 2 DVI jack The interlace mode is not supported The set might operate abnormally if a non standard video format is selected English 19 Sound Control Changing the Sound Setting Q Mode Standard Music Movie Clear Voice Custom You can select the type of special sound effect to be used when watching a given DroSuedbt o Mode uicem Equalizer 41 Press the TOOLS button to display Tools menu j SRS TruS dHD Off You can also configure the sound mode by selecting Tools Sound Mode run umoun Audio Language Audio Format Equalizer
14. A or V button to move the screen up down Then press the ENTERL button After selecting Zoom mode Press the gt button to select Position then press the ENTERS button Press the A or V button to move the picture up and down Then press the ENTERL button Press the 9 button to select Size then press the ENTERLS button Press the A or V button to magnify or reduce the picture size in the vertical direction Then press the ENTERLS button After selecting Screen Fit in HDMI 1080i 1080p or Component 1080i 1080p mode Select Position by pressing the lt or gt button Use the A V lt or gt button to move the picture Reset Press the lt or gt button to select Reset then press the ENTERL button You can initialize the setting f you use the Screen Fit function with HDMI 720p input 1 line will be cut at the top bottom left and right as in the overscan function You can select these options simply by pressing the P SIZE button on the remote control AS Digital NR Off Low Medium High Auto If the broadcast signal received by your TV is weak you can activate the Digital Noise Reduction feature to help reduce any static and ghosting that may appear on the screen When the signal is weak select one of the other options until the best picture is displayed Continued English 16 HDMI Black Level Normal Low You can directly select the black level on the screen to adjust the screen depth
15. Adjustment or Reset Select Reset to initialize the sound settings 5 Press the lt or gt button to adjust the settings Using the Setup Menu Setup displays the user settings of the Media Play menu 1 Press the MEDIA P button on the remote control to display the Media Play menu 2 Press the lt or gt button to select Setup then press the ENTER C button 3 Press the A or V button to select the desired option 4 Press the lt or gt button to select the option then press the ENTER C button To exit Media Play mode press the MEDIA P button on the remote control Music Repeat Mode On Off Select to repeatedly play music files Screen Saver Run Time 10 min 20 min 40 min 1 hour Select to set the waiting time before the screen saver appears Information Select to viewing the information of the connected device Remove Safely You can remove the device safely from the TV English 33 Picture Setting Picture Mode lt Standard gt Contrast 95 Brightness 45 Color 50 Dynamic Contrast Medium Black Tone Off Reset 4 Adjust CC Enter DS Return Sound Setting Sound Mode Custom gt Balance L50 R50 100Hz 300Hz 1KHz 3KHz 10KHz Reset 4 Adjust Enter DS Return j 851 98MB 995 00MB Free Media Play USB USB name 24 SETUP 4 o a n Q Photo Setup om USB W Device gt Exit Setup Music Repeat Mode Screen Saver Run Time Information Rem
16. ENTERUS button is pressed ENTER again press the A lt gt button to select Cancel Schedules the scheduling is canceled with the clock icon gone For details about scheduling programmes refer to the section RED Toggle between the Mini Guide or Full Guide Full Guide Scroll backwards quickly 24 hours GREEN Mini Guide Display previous page quickly Full Guide Scroll forwards quickly 24 hours YELLOW Mini Guide Display next page quickly BLUE Exit the guide INFO button for the detailed information Channel Number Running Time Status Bar Parental Level Video Quality INFO Information HD SD Sound Modes Subtitle or Teletext languages of Subtitle or Teletext and brief summary of the highlighted programme are included on the detailed information will be appeared if the summary is long Channel List For the detailed procedures on using the Channel List refer to the descriptions on pages 13 14 Qj Channel Mode When the P A VN button is pressed Channels will be switched within the selected channel list Added Ch Channels will be switched within the memorized channel list Favourite Ch Channels will be switched within the favourite channel list Q Fine Tune only analogue channels If the reception is clear you do not have to fine tune the channel as this is done automatically during the search and store operation If the signal is weak or distorted you may have to fine t
17. HDMI IN 2 DVI port you should set the HDMI2 DVI mode to PC in the Edit Name of the Input mode When connecting an HDMI DVI cable to the HDMI IN 2 DVI port you should set the HDMI2 DVI mode to DVI or DVI PC in the Edit Name of the Input mode In this case a separate sound connection is required English 25 Supported Program Q Self Diagnosis Picture Test If you think you have a picture problem perform the picture test Check the color pattern on the screen to see if the problem still exists Does the problem still exist with this test photo appears on the screen If the test pattern does not appear or there is noise in the test pattern select Yes If the test pattern is properly displayed select No Yes There may be a problem with the TV Contact Samsung s Call Center for assistance No There may be a problem with your external equipment Please check your connections If the problem still persists refer to the external device s user manual Sound Test If you think you have a sound problem please perform the sound test You can check the sound by playing a built in melody sound through the TV Does the problem still exist with this sound test appears on the screen If during the sound test you can hear sound only from one speaker or not at all select Yes If you can hear sound from the speakers select No Yes There may be a problem with the TV Contact Samsung s Call Center for assistance No There m
18. The sleep timer automatically shuts off the TV after a preset time The TV automatically switches to standby mode when the timer reaches 0 To cancel the Sleep Timer function select Off al Press the TOOLS button to display Tools menu You can also set the sleep timer by selecting Tools Sleep Timer Timer 1 Timer 2 Timer 3 Three different on off timer settings can be made OnTime Set the hour minute and Activate Inactivate To activate timer with the setting you ve chosen set to Activate Off Time Set the hour minute and Activate Inactivate To activate timer with the setting you ve chosen set to Activate Volume Set the required volume level Source Selects TV or USB device When you select the TV you can set the Antenna and Channel Antenna Select ATV or DTV Channel Select the desired channel When you select the USB you can set the Contents Contents Selects the desired contents on the USB Repeat Select Once Everyday Mon Fri Mon Sat Sat Sun or Manual When Manual is selected press the gt button to select the desired day of the week Press the ENTERL button over the desired day and the Y mark will appear You must set the clock first You can set the hour minute by pressing the number buttons on the remote control Auto Power Off When you set the timer On the television will eventually turn off if no controls are operated for 3 hours after the TV was turned on by
19. ability to install modified object code on the User Product for example the work has been installed in ROM The requirement to provide Installation Information does not include a requirement to continue to provide support service warranty or updates for a work that has been modified or installed by the recipient or for the User Product in which it has been modified or installed Access to a network may be denied when the modification itself materially and adversely affects the operation of the network or violates the rules and protocols for communication across the network Corresponding Source conveyed and Installation Information provided in accord with this section must be in a format that is publicly documented and with an implementation available to the public in source code form and must require no special password or key for unpacking reading or copying Additional Terms Additional permissions are terms that supplement the terms of this License by making exceptions from one or more of its conditions Additional permissions that are applicable to the entire Program shall be treated as though they were included in this License to the extent that they are valid under applicable law If additional permissions apply only to part of the Program that part may be used separately under those permissions but the entire Program remains governed by this License without regard to the additional permissions When you convey a copy of a co
20. is a Class B digital apparatus Design and specifications are subject to change without prior notice For the power supply and Power Consumption refer to the label attached to the product English 45 Software License This product uses parts of the software from the Independent JPEG Group This product uses parts of the software owned by the Freetype Project www freetype org This product uses some software programs which are distributed under the GPL LGPL license Accordingly the following GPL and LGPL software source codes that have been used in this product can be provided after asking to viswmanager samsung com GPL software Linux Kernel Busybox Binutils LGPL software Glibc ffmpeg smpeg libgphoto libusb SDL Q GNU GENERAL PUBLIC LICENSE GNU GENERAL PUBLIC LICENSE Version 3 29 June 2007 Copyright C 2007 Free Software Foundation Inc lt http fsf org gt Everyone is permitted to copy and distribute verbatim copies of this license document but changing it is not allowed Preamble The GNU General Public License is a free copyleft license for software and other kinds of works The licenses for most software and other practical works are designed to take away your freedom to share and change the works By contrast the GNU General Public License is intended to guarantee your freedom to share and change all versions of a program to make sure it remains free software for all its users We the Free Software Foundati
21. program Copyright C year name of author This program comes with ABSOLUTELY NO WARRANTY for details type show w This is free software and you are welcome to redistribute it under certain conditions type show c for details The hypothetical commands show w and show c should show the appropriate parts of the General Public License Of course your program s commands might be different for a GUI interface you would use an about box You should also get your employer if you work as a programmer or school if any to sign a copyright disclaimer for the program if necessary For more information on this and how to apply and follow the GNU GPL see lt http www gnu org licenses gt The GNU General Public License does not permit incorporating your program into proprietary programs If your program is a subroutine library you may consider it more useful to permit linking proprietary applications with the library If this is what you want to do use the GNU Lesser General Public License instead of this License But first please read http www gnu org philosophy why not Igpl html English 50 Q GNU Lesser General Public License LGPL GNU GENERAL PUBLIC LICENSE Version 3 29 June 2007 Copyright C 2007 Free Software Foundation Inc lt http fsf org gt Everyone is permitted to copy and distribute verbatim copies of this license document but changing it is not allowed Preamble The GNU Genera
22. refer to page 13 Child Lock is available only in TV mode 4 Change PIN You can change your personal ID number that is required to set up the TV Before the setup screen appears the PIN number input screen appears Enter your 4 digit PIN number The default PIN number of a new TV set is 0 0 0 0 If you forget the PIN code press the remote control buttons in the following sequence which resets the PIN to 0 0 0 0 POWER Off XY MUTE 8 2 4 POWER On Q Parental Lock This feature allows you to prevent unauthorized users such as children from watching unsuitable programmes by a 4 digit PIN Personal Identification Number code that is defined by the user Before the setup screen appears the PIN number input screen appears Enter your 4 digit PIN number The default PIN number of a new TV set is 0 0 0 0 You can change the PIN by selecting Change PIN from the menu When the parental ratings are set the ia symbol is displayed Allow All Press to unlock all TV ratings Block All Press to lock all TV ratings Q Subtitle You can activate and deactivate the subtitles Use this menu to set the Subtitle Mode Normal under the menu is the basic subtitle and Hard of hearing is the subtitle for a hearing impaired person Subtitle Off On Switches subtitles off or on Mode Normal Hard of hearing Sets the subtitle mode Subtitle Language Set the subtitle language If the programme you are watching doe
23. specified range 2 Accessory Kit contains Holder Ring 9 for installing other company s Wall Mount on Samsung TV Case B Screw down the hole when installing wall mount on the wall How to assemble the Stand Base depending on the model Using the screws for securing the stand base and the monitor firmly attach the In case of installing your TV on the wall close the monitor to the stand base cover on the stand base connection part using The exterior of the set may be different than the picture two screws for hiding PS50B550 PS58B550 Warning Firmly secure the stand to the TV before moving it as the stand may fall and could cause serious injury Two or more people should carry the TV Never lay the TV on the floor because of possible damage to the screen Always store the TV upright English 40 Securing the TV to the Wall over or destabilize the TV doing so may cause the TV to tip over causing serious injuries or death Follow all safety precautions provided on the included Safety Flyer For added stability install the anti fall device for safety purposes as follows j Pulling pushing or climbing on the TV may cause the TV to fall In particular ensure your children do not hang To avoid the TV from falling 1 Putthe screws into the clamps and firmly faste
24. that these contractual assumptions directly impose on those licensors and authors All other non permissive additional terms are considered further restrictions within the meaning of section 10 If the Program as you received it or any part of it contains a notice stating that it is governed by this License along with a term that is a further restriction you may remove that term If a license document contains a further restriction but permits relicensing or conveying under this License you may add to a covered work material governed by the terms of that license document provided that the further restriction does not survive such relicensing or conveying If you add terms to a covered work in accord with this section you must place in the relevant source files a statement of the additional terms that apply to those files or a notice indicating where to find the applicable terms Additional terms permissive or non permissive may be stated in the form of a separately written license or stated as exceptions the above requirements apply either way Termination You may not propagate or modify a covered work except as expressly provided under this License Any attempt otherwise to propagate or modify it is void and will automatically terminate your rights under this License including any patent licenses granted under the third paragraph of section 11 However if you cease all violation of this License then your license from a particular
25. the extent that warranties are provided that licensees may convey the work under this License and how to view a copy of this License If the interface presents a list of user commands or options such as a menu a prominent item in the list meets this criterion 1 Source Code The source code for a work means the preferred form of the work for making modifications to it Object code means any nonsource form of a work A Standard Interface means an interface that either is an official standard defined by a recognized standards body or in the case of interfaces specified for a particular programming language one that is widely used among developers working in that language The System Libraries of an executable work include anything other than the work as a whole that a is included in the normal form of packaging a Major Component but which is not part of that Major Component and b serves only to enable use of the work with that Major Component or to implement a Standard Interface for which an implementation is available to the public in source code form A Major Component in this context means a major essential component kernel window system and so on of the ht Licensees and English 46 specific operating system if any on which the executable work runs or a compiler used to produce the work or an object code interpreter used to run it The Corresponding Source for a work in object
26. the timer This function is only available in timer On mode and prevents overheating which may occur if a TV is on for too long time English 24 Source List Edit Name Q Source List Use to select TV or other external input sources such as DVD players or Cable Box Satellite receivers Set Top Box connected to the TV Use to select the input source of your choice Edit Name TV AV1 AV2 Component1 Component2 PC HDMI1 HDMI2 DVI HDMI3 HDMI4 USB You can choose only those external devices that are connected to the TV In the Source List connected inputs will be highlighted and sorted to the top Inputs that are not connected will be sorted to the bottom PC always stays activated Using the Colour buttons on the remote with the Source list Red Refresh Refreshes the connecting external devices Ce Ce 4 TOOLS Tools Displays the Edit Name and Information menus MUTE Press the SOURCE button on the remote control to view an external signal source x TV mode can be selected by pressing the TV button number buttons 0 9 and the Em an I P A button on the remote control l Ey Edit Name 4 VCR DVD Cable STB Satellite STB PVR STB AV Receiver Game Camcorder PC DVI DVI PC TV IPTV Blu ray HD DVD DMA You can name the device connected to the input jacks to make your input source selection easier When a PC with a resolution of 1920x1080 60Hz is connected to the
27. you have set up press the FAV CH button on the remote control Lock Unlock You can lock a channel so that the channel cannot be selected and viewed This function is available only when the Child Lock is set to On see page 22 The PIN number input screen appears Enter your 4 digit PIN number The default PIN number of a new TV set is 0 0 0 0 You can change the PIN by selecting Change PIN from the menu The f symbol will be displayed and the channel will be locked Edit Channel Name only analogue channel Channels can labeled so that their call letters appear whenever the channel is selected The names of digital broadcasting channels are automatically assigned and cannot be labeled Continued English 13 Edit Channel Number only digital channel You can also edit the channel number by pressing the number buttons on the remote control Sort only analogue channel This operation allows you to change the programme numbers of the stored channels This operation may be necessary after using the auto store Timer Viewing If you reserve a programme you want to watch the channel is automatically switched to the reserved channel in the Channel List even when you are watching another channel To reserve a programme set the current time first See page 24 f e f fe Only memorized channels can be reserved You can set the channel month day year hour and minute directly by pressing the number buttons
28. your connection cables Improper installation of wall mount can create excessive noise To minimize the possibility of screen burn this unit is equipped with screen burn reduction technology Pixel Shift technology enables you to set picture movement up down Vertical Line and side to side Horizontal Dot Can not control TV power or volume with Cable Sat box remote control Program the Cable Set top box remote control to operate the TV Refer to Cable Set top box user manual for SAMSUNG TV code Not Supported Mode message Check the supported resolution of the TV and adjust the external device s output resolution accordingly Refer to resolution settings in this manual Plastic smell from TV This smell is normal and will dissipate over time TV Signal Strength is unavailable in the Self Diagnostic Test menu This function is only available with digital channels with an Antenna RF Coax connection TV is tilted to right or left side Remove the stand base from TV and reassemble Can not assemble stand base Make sure TV is placed on flat surface If can not remove screws from TV please use magnetized screw driver Channel menu is grey out unavailable Channel menu is only available when TV source is selected Your settings are lost after 30 minutes or every time TV is turned off Intermittent loss of audio or video If TV is in the Store Demo mode it will reset audio and
29. 00 limit may not be displayed in the Photo List or Music List MP3 files with DRM that have been downloaded from a non free site cannot be played MP3 files with DRM downloaded from pay sites are not played DRM Digital Rights Management prevents illegal uses of digital media for copyright protection When moving to a photo loading may take a few seconds At this point the loading icon will appear at the screen English 27 Using the Media Play Function This function enables you to view and listen to photo music and movie files saved on a USB Mass Storage Class MSC device It might not work properly with unlicensed multimedia files E um od espe Entering the Media Play Menu 1 Press the MENU button Press the A or V button to select Application then Media Play 148 48NBIS05 00MB Free press the ENTERCS button USB USBname 2 Press the A or V button to select Media Play USB then press the ENTERC fas button PHOTO The Media Play menu is displayed Press the SOURCE button on the remote control repeatedly to select USB o then press the ENTER C button Press the MEDIA P button on the remote control to display the Media Play cre menu 3 Press the Red button then press the A or V button to select the corresponding USB Memory Device i e if connected through a hub Press the ENTER Cs button This function differs depending on the USB Memory Device connected to TV The selected USB dev
30. 000 FHD level pixels which require sophisticated technology to produce However there may be few bright or dark pixels on the screen These pixels will have no impact on the performance of the product Avoid operating the TV at temperatures below 5 C 41 F A still image displayed too long may cause permanent damage to the PDP Panel Watching the PDP TV in 4 3 format for a long period of time may leave traces of borders displayed on the left right and centre of the screen caused by the difference of light emission on the screen Playing a DVD or a game console may cause similar effect to the screen Damages caused by the above effect are not covered by the Warranty Afterimage on the Screen Displaying still images from Video games and PC for longer than a certain period of time may produce partial afterimages To prevent this effect reduce the brightness and contrast when displaying still images Warranty Warranty does not cover any damage caused by image retention Burn in is not covered by the warranty Installation Be sure to contact an authorized service centre when installing your set in a location with heavy dust high or low temperatures high humidity chemical substance and where it operates continually such as the airport the train station etc Failure to do so may cause a serious damage to your set A AAL 4 AA 4 A A
31. Conveying Non Source Forms You may convey a covered work in object code form under the terms of sections 4 and 5 provided that you also convey the machinereadable Corresponding Source under the terms of this License in one of these ways a Convey the object code in or embodied in a physical product including a physical distribution medium accompanied by the Corresponding Source fixed on a durable physical medium customarily used for software interchange Convey the object code in or embodied in a physical product including a physical distribution medium accompanied by a written offer valid for at least three years and valid for as long as you offer spare parts or customer support for that product model to give anyone who possesses the object code either 1 a copy of the Corresponding Source for all the software in the product that is covered by this License on a durable physical medium customarily used for software interchange for a price no more than your reasonable cost of physically performing this conveying of source or 2 access to copy the Corresponding Source from a network server at no charge c Convey individual copies of the object code with a copy of the written offer to provide the Corresponding Source This alternative is allowed only occasionally and noncommercially and only if you received the object code with such an offer in accord with subsection 6b Convey the object code by offering access from a designated pla
32. DVI 50Hz move X 6 X 3 9 6 8 Component O0 0 0 O0 O0 9 9 75Q Coaxial connector for Aerial Cable Network English 6 Remote Control You can use the remote control up to a distance of about 23 feet from the TV The performance of the remote control may be affected by bright light POWER button turns the TV on and off Selects the TV mode directly Number buttons for direct channel access Use to Select on screen menu items Temporary sound switch off Volume increase Volume decrease Available source selection Channel control button Use to quickly select frequently used functions Control the cursor in the menu Use to see information on the current broadcast Use these buttons in the Channel list etc Sound mode selection Use these buttons in the Channel list and Anynet Previous channel Next channel J Previous channel Displays the main on screen menu Press to switch to your Favourite channels Returns to the previous menu Exit the on screen menu This function enables you to view and play photo music and movie files from an external device Refer to pages 29 Photo 31 Music Picture size selection Digital subtitle display Electronic Program Guide EPG display See oo oo oo eo OOO QOO OO O Teletext Functions eoceooo0 o ooo oo Exit from the teletext display depending on the model Teletext mode s
33. E STATED IN WRITING THE COPYRIGHT HOLDERS AND OR OTHER PARTIES PROVIDE THE PROGRAM AS IS WITHOUT WARRANTY OF ANY KIND EITHER EXPRESSED OR IMPLIED INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE THE ENTIRE RISK AS TO THE QUALITY AND PERFORMANCE OF THE PROGRAM IS WITH YOU SHOULD THE PROGRAM PROVE DEFECTIVE YOU ASSUME THE COST OF ALL NECESSARY SERVICING REPAIR OR CORRECTION Limitation of Liability IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING WILL ANY COPYRIGHT HOLDER OR ANY OTHER PARTY WHO MODIFIES AND OR CONVEYS THE PROGRAM AS PERMITTED ABOVE BE LIABLE TO YOU FOR DAMAGES INCLUDING ANY GENERAL SPECIAL INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE OR INABILITY TO USE THE PROGRAM INCLUDING BUT NOT LIMITED TO LOSS OF DATA OR DATA BEING RENDERED INACCURATE OR LOSSES SUSTAINED BY YOU OR THIRD PARTIES OR A FAILURE OF THE PROGRAM TO OPERATE WITH ANY OTHER PROGRAMS EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES Interpretation of Sections 15 and 16 If the disclaimer of warranty and limitation of liability provided above cannot be given local legal effect according to their terms reviewing courts shall apply local law that most closely approximates an absolute waiver of all civil liability in connection with the Program unless a warranty or assumption of liability accompanies a copy of the Program in retu
34. Eric Young eay cryptsoft com All rights reserved This package is an SSL implementation written by Eric Young eay cryptsoft com The implementation was written so as to conform with Netscapes SSL This library is free for commercial and non commercial use as long as the following conditions are aheared to The following conditions apply to all code found in this distribution be it the RC4 RSA lhash DES etc code not just the SSL code The SSL documentation included with this distribution is covered by the same copyright terms except that the holder is Tim Hudson tjh cryptsoft com Copyright remains Eric Young s and as such any Copyright notices in the code are not to be removed If this package is used in a product Eric Young should be given attribution as the author of the parts of the library used This can be in the form of a textual message at program startup or in documentation online or textual provided with the package Redistribution and use in source and binary forms with or without modification are permitted provided that the following conditions are met 1 Redistributions of source code must retain the copyright notice this list of conditions and the following disclaimer 2 Redistributions in binary form must reproduce the above copyright notice this list of conditions and the following disclaimer in the documentation and or other materials provided with the distribution 3 All advertising materials mentioning feature
35. GRAM TO OPERATE WITH ANY OTHER PROGRAMS EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES 17 Interpretation of Sections 15 and 16 If the disclaimer of warranty and limitation of liability provided above cannot be given local legal effect according to their terms reviewing courts shall apply local law that most closely approximates an absolute waiver of all civil liability in connection with the Program unless a warranty or assumption of liability accompanies a copy of the Program in return for a fee O END OF TERMS AND CONDITIONS How to Apply These Terms to Your New Programs If you develop a new program and you want it to be of the greatest possible use to the public the best way to achieve this is to make it free software which everyone can redistribute and change under these terms To do so attach the following notices to the program It is safest to attach them to the start of each source file to most effectively state the exclusion of warranty and each file should have at least the copyright line and a pointer to where the full notice is found one line to give the program s name and a brief idea of what it does Copyright C year name of author This program is free software you can redistribute it and or modify it under the terms of the GNU General Public License as published by the Free Software Foundation either version 3 of the License or at your option any later version Th
36. O RIL VIDEO HDMI connection Video and audio inputs for external devices such as a When using an HDMI DVI cable connection you must use camcorder or VCR the HDMI IN 2 DVI jack PC IN AUDIO PC What is HDMI EM Connect to the video and audio output jack on your PC High Definition Multimedia interface allows the transmission of high definition digital video data and multiple channels of digital audio The HDMI DVI terminal supports DVI connection to an extended device with the appropriate cable not e COMPONENT IN 1 2 Audio AUDIO L R and video Y Ps Pr inputs for Component Q HEADPHONES JACK You can connect a set of headphones if you wish to watch a supplied The difference between HDMI and DVI is television programme without disturbing the other people in that the HDMI device is smaller in size has the HDCP the room High Bandwidth Digital Copy Protection coding feature Prolonged use of headphones at a high volume may installed and supports multi channel digital audio damage your hearing DVI AUDIO IN DIGITAL AUDIO OUT OPTICAL DVI audio outputs for external devices Connect to a Digital Audio Component Q USB SERVICE Connect a USB mass storage device to view photo files and Connector for service play audio files AUDIO OUT AUDIO RIL Connect RCA audio signals from the TV to an external source Supported modes for HDMI DVI and Component such as Audio equipment OQ ANTIN HDMI
37. SERIES gt Imagine the possibilities Thank you for purchasing this Samsung product To receive more complete service please register your product at www samsung com register Model SeralNo umm User Instructions Screen Image retention Do not display a still image such as on a video game or when hooking up a PC to this PDP on the plasma monitor panel for more than 2 hours as it can cause screen image retention This image retention is also known as screen burn To avoid such image retention reduce the degree of brightness and contrast of the screen when displaying a still image Height The PDP can normally operate only under 2000m in height It might abnormally function at a place over 2000m in height so do not install and operate there Heat on the top of the PDP TV The top side of the product may be hot after long period of use as heat dissipates from the panel through the vent hole in the upper part of the product This is normal and does not indicate any defect or operation failure of the product However children should be prevented from touching the upper part of the product The product is making a cracking noise A cracking noise may occur when the product contracts or expands due to a change of surrounding environment such as temperature or humidity This is normal and not a defect of the unit Cell Defects The PDP uses a panel consisting of 2 360 000 HD level to 6 221
38. action through a network will apply to the combination as such English 49 14 15 16 17 Revised Versions of this License The Free Software Foundation may publish revised and or new versions of the GNU General Public License from time to time Such new versions will be similar in spirit to the present version but may differ in detail to address new problems or concerns Each version is given a distinguishing version number If the Program specifies that a certain numbered version of the GNU General Public License or any later version applies to it you have the option of following the terms and conditions either of that numbered version or of any later version published by the Free Software Foundation If the Program does not specify a version number of the GNU General Public License you may choose any version ever published by the Free Software Foundation If the Program specifies that a proxy can decide which future versions of the GNU General Public License can be used that proxy s public statement of acceptance of a version permanently authorizes you to choose that version for the Program Later license versions may give you additional or different permissions However no additional obligations are imposed on any author or copyright holder as a result of your choosing to follow a later version Disclaimer of Warranty THERE IS NO WARRANTY FOR THE PROGRAM TO THE EXTENT PERMITTED BY APPLICABLE LAW EXCEPT WHEN OTHERWIS
39. again To display normal screen press it once again reveal Used to display the hidden text answers to quiz games for example To display normal screen press it again MUTE i SA teletext on mix SOURCE Press to activate teletext mode after selecting the channel providing the teletext service EZB Vv Press it twice to overlap the teletext with the current broadcasting screen i ven sub page Used to display the available sub page Ez z E page up 4 SI Used to display the next teletext page page down Used to display the previous teletext page es alae C cw Press to select the teletext mode LIST FLOF If you press it in the LIST mode it E switches into the List save mode In the List save mode you can save teletext page into list using the 9 store button Li 3 hold Used to hold the display on a given page if the selected page is linked with several secondary pages which follow on automatically To resume press it again Ex cancel Used to display the broadcast when searching for a page Colour buttons red green yellow blue If the FASTEXT system is used by a broadcasting company the different topics covered on a teletext page are colour coded and can be selected by pressing the coloured buttons Press one of them corresponding to the required The page is displayed with other coloured information that can be selected in the same way To display the previous or next page pres
40. agation that enables other parties to make or receive copies Mere interaction with a user through a computer network with no transfer of a copy is not conveying An interactive user interface displays Appropriate Legal Notices to the extent that it includes a convenient and prominently visible feature that 1 displays an appropriate copyright notice and 2 tells the user that there is no warranty for the work except to the extent that warranties are provided that licensees may convey the work under this License and how to view a copy of this License If the interface presents a list of user commands or options such as a menu a prominent item in the list meets this criterion ht 1 Licensees and 1 Source Code The source code for a work means the preferred form of the work for making modifications to it Object code means any nonsource form of a work A Standard Interface means an interface that either is an official standard defined by a recognized standards body or in the case of interfaces specified for a particular programming language one that is widely used among developers working in that language The System Libraries of an executable work include anything other than the work as a whole that a is included in the normal form of packaging a Major Component but which is not part of that Major Component and b serves only to enable use of the work with that Major Component or to implement a S
41. ailable input sources Press to change channels In the on screen menu use the TV AV1 AV2 Component1 Component2 PC HDMI1 CH V buttons as you would use the A and V buttons on HDMI2 DVI HDMI3 HDMI4 USB the remote control In the on screen menu use this button as you would use Q POWER INDICATOR the ENTER button on the remote control Lights up when the power is on Q MENU Q POWER Press to see an on screen menu of your TV s features Press to turn the TV on and off VOL REMOTE CONTROL SENSOR Press to increase or decrease the volume In the on screen Aim the remote control towards this spot on the TV menu use the VOL buttons as you would use the Q SPEAKERS and gt buttons on the remote control English 5 Viewing the Connection Panel TV Rear Panel AVIN1 AUDIO VIDEO Z gt ES m d VIDEO 9 Q auo DIGITAL AUDIO OUT OPTICAL ZN EEE A r TE EE SS ERE oo The product colour and shape may vary depending on the model Whenever you connect an audio or video system to your set ensure that all elements are switched off When connecting an external device match the colour of the connection terminal to the cable Q POWER IN HDMI IN 1 2 DVI 3 4 Connect the supplied power cord No additional Audio connection is needed for an HDMI to AVIN 1 2 AUDI
42. alent copying facilities provided you maintain clear directions next to the object code saying where to find the Corresponding Source Regardless of what server hosts the Corresponding Source you remain obligated to ensure that it is available for as long as needed to satisfy these requirements e Convey the object code using peer to peer transmission provided you inform other peers where the object code and Corresponding Source of the work are being offered to the general public at no charge under subsection 6d A separable portion of the object code whose source code is excluded from the Corresponding Source as a System Library need not be included in conveying the object code work A User Product is either 1 a consumer product which means any tangible personal property which is normally used for personal family or household purposes or 2 anything designed or sold for incorporation into a dwelling In determining whether a product is a consumer product doubtful cases shall be resolved in favor of coverage For a particular product received by a particular user normally used refers to a typical or common use of that class of product regardless of the status of the particular user or of the way in which the particular user actually uses or expects or is expected to use the product A product is a consumer product regardless of whether the product has substantial commercial industrial or non consumer uses unless such u
43. an get the source code And you must show them these terms so they know their rights Developers that use the GNU GPL protect your rights with two steps 1 assert copyright on the software and 2 offer you this License giving you legal permission to copy distribute and or modify it For the developers and authors protection the GPL clearly explains that there is no warranty for this free software For both users and authors sake the GPL requires that modified versions be marked as changed so that their problems will not be attributed erroneously to authors of previous versions Some devices are designed to deny users access to install or run modified versions of the software inside them although the manufacturer can do so This is fundamentally incompatible with the aim of protecting users freedom to change the software The systematic pattern of such abuse occurs in the area of products for individuals to use which is precisely where it is most unacceptable Therefore we have designed this version of the GPL to prohibit the practice for those products If such problems arise substantially in other domains we stand ready to extend this provision to those domains in future versions of the GPL as needed to protect the freedom of users Finally every program is threatened constantly by software patents States should not allow patents to restrict development and use of software on general purpose computers but in those that do we w
44. and authors sake the GPL requires that modified versions be marked as changed so that their problems will not be attributed erroneously to authors of previous versions Some devices are designed to deny users access to install or run modified versions of the software inside them although the manufacturer can do so This is fundamentally incompatible with the aim of protecting users freedom to change the software The systematic pattern of such abuse occurs in the area of products for individuals to use which is precisely where it is most unacceptable Therefore we have designed this version of the GPL to prohibit the practice for those products If such problems arise substantially in other domains we stand ready to extend this provision to those domains in future versions of the GPL as needed to protect the freedom of users Finally every program is threatened constantly by software patents States should not allow patents to restrict development and use of software on general purpose computers but in those that do we wish to avoid the special danger that patents applied to a free program could make it effectively proprietary To prevent this the GPL assures that patents cannot be used to render the program non free The precise terms and conditions for copying distribution and modification follow TERMS AND CONDITIONS 0 Definitions This License refers to version 3 of the GNU General Public License Copyright also means cop
45. ay be a problem with your external equipment Please check your connections If the problem still persists refer to the external device s user manual f you hear no sound from the TV s speakers before performing the sound test make sure Speaker Select is set to TV speaker in the Sound menu The melody will be heard during the test even if Speaker Select is set to External Speaker or the sound is muted by pressing the Y MUTE button Signal Strength Digital channels only You can adjust your antenna to improve the reception of available digital channels If the signal strength meter indicates that the signal is weak physically adjust your antenna to increase the signal strength Continue to adjust the antenna until you find the best position with the strongest signal Q Software Upgrade To keep your product up to date with new Digital Television features then software upgrades are periodically broadcast as part of the normal Television signal It will automatically detect these signals and display the software upgrade banner You are given the option to install the upgrade M By USB ih Insert a USB drive containing the firmware upgrade into TV Please be careful to not disconnect the power or remove the USB drive while upgrades are being applied The TV will turn off and turn on automatically after completing the firmware upgrade Please check the firmware version after the upgrades are complete When software is upgraded
46. ce gratis or for a charge and offer equivalent access to the Corresponding Source in the same way through the same place at no further charge You need not require recipients to copy the Corresponding Source along with the object code If the place to copy the object code is a network server the Corresponding Source may be on a different server operated by you or a third party that supports equivalent copying facilities provided you maintain clear directions next to the object code saying where to find the Corresponding Source Regardless of what server hosts the Corresponding Source you remain obligated to ensure that it is available for as long as needed to satisfy these requirements b d English 52 e Convey the object code using peer to peer transmission provided you inform other peers where the object code and Corresponding Source of the work are being offered to the general public at no charge under subsection 6d A separable portion of the object code whose source code is excluded from the Corresponding Source as a System Library need not be included in conveying the object code work A User Product is either 1 a consumer product which means any tangible personal property which is normally used for personal family or household purposes or 2 anything designed or sold for incorporation into a dwelling In determining whether a product is a consumer product doubtful cases shall be resolved in fav
47. ces seseeeseeeeneeees 34 a Plug amp Play Feature rM 10 m Setting Up Anynett cccceccsccssessscsssessessnresseessrssseesnes 35 m Scanning and Switching between Anynet Devices 35 a Recording tcc 36 m Storing Channels usse iua attori Saa nie na orco edo heben da 11 m Listening through a Receiver Home theater 37 m Managing Channels ssssseeeennnn 13 m Troubleshooting for Anynet oo ccc cccecccssesscssssecteetseteeees 37 m Changing the Picture Settings sss 15 m Teletext Feature eeeseeeeeeeeeeeeee rennen 38 m Setting up the TV with your PC sesseeeeereenen 18 m Wall Mount Kit Specifications VESA ssssss 39 u PO DISP TER 19 m Preparing before installing Wall Mount on the wall 40 m How to assemble the Stand Base depending on the model 40 a Securing the TV to the Wall m Changing the Sound Setting ueessssssss 20 m Securing the Installation Space ssssssss 41 m Selecting the Sound Mode seeeeeee 21 Miliiele s cderelipio MEME ERR 42 E SCC CANONS RE m 45 w Software License 46 m Configuring the Setup Menu seeeennnnen 22 m Setting the Time ccccssccsscsssecsssesssscsssessrssseessesssessseeenees 24 amp Source List Edi
48. code form means all the source code needed to generate install and for an executable work run the object code and to modify the work including scripts to control those activities However it does not include the work s System Libraries or general purpose tools or generally available free programs which are used unmodified in performing those activities but which are not part of the work For example Corresponding Source includes interface definition files associated with source files for the work and the source code for shared libraries and dynamically linked subprograms that the work is specifically designed to require such as by intimate data communication or control flow between those subprograms and other parts of the work The Corresponding Source need not include anything that users can regenerate automatically from other parts of the Corresponding Source The Corresponding Source for a work in source code form is that same work 2 Basic Permissions All rights granted under this License are granted for the term of copyright on the Program and are irrevocable provided the stated conditions are met This License explicitly affirms your unlimited permission to run the unmodified Program The output from running a covered work is covered by this License only if the output given its content constitutes a covered work This License acknowledges your rights of fair use or other equivalent as provided by copyright law You may make run and propa
49. copyright on the Program and are irrevocable provided the stated conditions are met This License explicitly affirms your unlimited permission to run the unmodified Program The output from running a covered work is covered by this License only if the output given its content constitutes a covered work This License acknowledges your rights of fair use or other equivalent as provided by copyright law You may make run and propagate covered works that you do not convey without conditions so long as your license otherwise remains in force You may convey covered works to others for the sole purpose of having them make modifications exclusively for you or provide you with facilities for running those works provided that you comply with the terms of this License in conveying all material for which you do not control copyright Those thus making or running the covered works for you must do so exclusively on your behalf under your direction and control on terms that prohibit them from making any copies of your copyrighted material outside their relationship with you Conveying under any other circumstances is permitted solely under the conditions stated below Sublicensing is not allowed section 10 makes it unnecessary 3 Protecting Users Legal Rights From Anti Circumvention Law No covered work shall be deemed part of an effective technological measure under any applicable law fulfilling obligations under article 11 of the WIPO copyright treaty adopte
50. covered work you may if authorized by the copyright holders of that material supplement the terms of this License with terms a Disclaiming warranty or limiting liability differently from the terms of sections 15 and 16 of this License or b Requiring preservation of specified reasonable legal notices or author attributions in that material or in the Appropriate Legal Notices displayed by works containing it or c Prohibiting misrepresentation of the origin of that material or requiring that modified versions of such material be marked in reasonable ways as different from the original version or d Limiting the use for publicity purposes of names of licensors or authors of the material or e Declining to grant rights under trademark law for use of some trade names trademarks or service marks or f Requiring indemnification of licensors and authors of that material by anyone who conveys the material or modified versions of it with contractual assumptions of liability to the recipient for any liability that these contractual assumptions directly impose on those licensors and authors All other non permissive additional terms are considered further restrictions within the meaning of section 10 If the Program as you received it or any part of it contains a notice stating that it is governed by this License along with a term that is a further restriction you may remove that term If a license document contains a further restricti
51. d on 20 December 1996 or similar laws prohibiting or restricting circumvention of such measures When you convey a covered work you waive any legal power to forbid circumvention of technological measures to the extent such circumvention is effected by exercising rights under this License with respect to the covered work and you disclaim any intention to limit operation or modification of the work as a means of enforcing against the work s users your or third parties legal rights to forbid circumvention of technological measures 4 Conveying Verbatim Copies You may convey verbatim copies of the Program s source code as you receive it in any medium provided that you conspicuously and appropriately publish on each copy an appropriate copyright notice keep intact all notices stating that this License and any nonpermissive terms added in accord with section 7 apply to the code keep intact all notices of the absence of any warranty and give all recipients a copy of this License along with the Program You may charge any price or no price for each copy that you convey and you may offer support or warranty protection for a fee 5 Conveying Modified Source Versions You may convey a work based on the Program or the modifications to produce it from the Program in the form of source code under the terms of section 4 provided that you also meet all of these conditions a The work must carry prominent notices stating that you modified it and gi
52. d the audio receiver a sound echo may occur due to the decoding speed difference between the main speaker and the audio receiver In this case use the TV Speaker function You can only select the language among the actual languages being broadcast I DOLBY Manufactured under license from Dolby Laboratories DIGITAL PLUS Dolby and the double D symbol are trademarks of Dolby Laboratories Q Audio Description only digital channel This is an auxiliary audio function that provides an additional audio track for visually challenged persons This function handles the Audio Stream for the AD Audio Description when it is sent along with the Main audio from the broadcaster Users can turn the Audio Description On or Off and control the volume Audio Description Off On Turn the audio description function on or off Volume You can adjust the audio description volume Volume is active when Audio Description is set to On Continued English 20 o Auto Volume Off On Each broadcasting station has its own signal conditions and so it is not easy to adjust the volume every time the channel is changed This feature lets you automatically adjust the volume of the desired channel by lowering the sound output when the modulation signal is high or by raising the sound output when the modulation signal is low Q Speaker Select External Speaker TV Speaker If you want to hear the sound through separate speakers cancel t
53. derived from this software without prior written permission For written permission please contact openssl core openssl org 5 Products derived from this software may not be called OpenSSL nor may OpenSSL appear in their names without prior written permission of the OpenSSL Project 6 Redistributions of any form whatsoever must retain the following acknowledgment This product includes software developed by the OpenSSL Project for use in the OpenSSL Toolkit http www openssl org English 55 THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT AS IS AND ANY EXPRESSED OR IMPLIED WARRANTIES INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED IN NO EVENT SHALL THE OpenSSL PROJECT OR ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT INDIRECT INCIDENTAL SPECIAL EXEMPLARY OR CONSEQUENTIAL DAMAGES INCLUDING BUT NOT LIMITED TO PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES LOSS OF USE DATA OR PROFITS OR BUSINESS INTERRUPTION HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY WHETHER IN CONTRACT STRICT LIABILITY OR TORT INCLUDING NEGLIGENCE OR OTHERWISE ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE This product includes cryptographic software written by Eric Young eay cryptsoft com This product includes software written by Tim Hudson tjn cryptsoft com Original SSLeay License Copyright C 1995 1998
54. devices may take up to 2 minutes You cannot cancel the operation during the switching operation The time required to scan for devices is determined by the number of connected devices When the device scan is complete the number of devices found are not displayed Although the TV automatically searches the device list when the TV is turned on via the power button devices connected to the TV when the TV is on or under some conditions are not automatically displayed in the device list Press the red button to search for the connected device If you have selected external input mode by pressing the SOURCE button you cannot use the Anynet function Make sure to switch to an Anynet device by using the Device List Continued English 35 Q Anynet Menu The Anynet menu changes depending on the type and status of the Anynet devices connected to the TV Anynet Menu Description View TV Anynet mode changes to TV broadcast mode Device List Shows the Anynet device list device name MENU Shows the connected device menus E g If a DVD recorder is connected the disc menu of the DVD recorder will appear device name INFO Shows the play menu of the connected device E g If a DVD recorder is connected the play menu of the DVD recorder will appear Record recorder Starts recording immediately using the recorder This is only available for devices that support the recording function recorder Reserve Recording Enab
55. e TV button on the remote control to turn the TV on The programme that you were watching last is reselected automatically 3 Press the numeric button 0 9 or channel up down A VW button on the remote control or A CH VY button on your set When you switch the set on for the very first time you will be asked to choose language in which the menus are to be displayed 4 To switch your set off press the POWER button again Placing Your Television in Standby Mode Your set can be placed in standby mode in order to reduce the power consumption The standby mode can be useful when you wish to interrupt viewing temporarily during a meal for example 1 Press the POWER button on the remote control The screen is turned off and a red standby indicator appears on your set 2 To switch your set back on simply press the POWER numeric buttons 0 9 TV button or channel up down A V button again Do not leave your set in standby mode for long periods of time when you are away on holiday for example It is best to unplug the set from the mains and aerial English 8 Viewing the Menus 1 With the power on press the MENU button The main menu appears on the screen The menu s left side has icons Picture Sound Channel Setup Input Application Support 2 Press the A or V button to select one of the icons Then press the ENTER L button to access the icon s sub menu 3 Press the EXIT button to exit The
56. e assigned to a channel Sets the programme number using the A V or number 0 9 buttons Colour System Auto PAL SECAM NTSC4 43 Sets the colour system value using the A or V button Sound System BG DK 1 L Sets the sound system value using the A or V button Channel When you know the number of the channel to be stored Press the A or V button to select C Air channel or S Cable channel Press the 9 button then press the A V or number 0 9 buttons to select the required number You can also select the channel number directly by pressing the number 0 9 buttons If there is abnormal sound or no sound reselect the sound standard required Search When you do not know the channel numbers Press the A or V button to start the search The tuner scans the frequency range until the first channel or the channel that you selected is received on the screen Store When you store the channel and associated programme number Set to OK by pressing the ENTER L button Channel mode Air channel mode You can select a channel by entering the assigned number to each air broadcasting station in this mode S Cable channel mode You can select a channel by entering the assigned number for each cable channel in this mode Continued English 11 Q Full Guide Mini Guide The EPG Electronic Programme Guide information is provided by the broadcasters Programme entries may appear blank or out of date as a res
57. e input video source Native Sets the color range wider than the that of the input video source Custom Adjusts the color range to suit your preference Customizing the Colour Space Colour Red Green Blue Yellow Cyan Magenta Adjusts the Colour range to suit your preference Colour is available when Colour Space is set to Custom Red Green Blue In Colour you can adjust the RGB values for the selected colour Reset Resets the colour space to the default values Continued English 15 White Balance You can adjust the colour temperature for more natural picture colours R Offset G Offset B Offset R Gain G Gain B Gain Changing the adjustment value will refresh the adjusted screen Reset The previously adjusted white balance will be reset to the factory defaults Flesh Tone You can adjust the flesh tone to be more or less red Changing the adjustment value will refresh the adjusted screen Edge Enhancement Off On You can emphasize object boundaries in the picture xvYCC Off On Setting the xvYCC mode to on increases detail and colour space when watching movies from an external device i e DVD player xvYCC is available when the picture mode is set to Movie and the external input is set to HDMI or Component mode This function may not be supported depending on your external device Tint G R G50 R50 Picture Options Advanced Setting _ You can customize the additional
58. e mode When you make changes to Cell Light Contrast Brightness Sharpness Colour or Tint G R the OSD will be adjusted accordingly In Analogue TV Ext AV modes of the PAL system you cannot use the Tint Function In PC mode you can only make changes to Cell Light Contrast and Brightness Settings can be adjusted and stored for each external device you have connected to an input of the TV The energy consumed during use can be significantly reduced if the level of brightness of the picture is reduced and then this will reduce the overall running cost Colour 50 You can adjust the detailed settings for your screen including the color and contrast Tint G R _ G50 R50 Black Tone Off Dark Darker Darkest You can select the black level on the screen to adjust the screen depth Dynamic Contrast Off Low Medium High You can adjust the screen contrast so that the optimal contrast is provided Advanced Setting is available in Standard or Movie mode In PC mode you can only make changes to Dynamic Contrast Gamma and White Balance from among the Advanced Setting items H Advanced Setting _ etti Picture Options Picture Reset Gamma You can adjust the primary colour Intensity Colour Space Colour Space is a colour matrix composed of red green and blue colours Select your favourite colour space to experience the most natural colour Auto Automatically sets the color range depending on th
59. e such as PlayStation or Xbox you can enjoy a 4 more realistic gaming experience by selecting the game menu GameMode Off Child Lock On When the Game Mode is On Change PIN Picture Mode is automatically changed to Standard and users cannot change the Parental Lock mode Subtitle Sound Mode is automatically changed to Custom and users cannot change the en i egnguggb mode Adjust the sound using the equalizer PER SEE Melody Medium The Reset in the Sound menu is activated Reset function initializes the Equalizer settings to the factory default setting Game Mode is not available in regular TV mode or Game Mode set to Off If the picture is poor when external device is connected to TV check if Game Mode is On This function supports only game function If you display the TV menu in Game mode the screen shakes slightly The mark appears on the screen which means that Game Mode is on with the selected source Game mode is not available in PC mode QJ Child Lock Off On This feature allows you to prevent unauthorized users such as children from watching unsuitable programmes by muting out video and audio Before the setup screen appears the PIN number input screen appears Enter your 4 digit PIN number The default PIN number of a new TV set is 0 0 0 0 You can change the PIN by selecting Change PIN from the menu Z You can lock some channels in Channel List
60. eceiver Press the lt or button to select On or Off M List If your receiver supports audio only it may not appear in the device list Mi e The receiver will work when you have properly connected the Optical IN jack of the DVDR INFO receiver to the Optical Out jack of the TV Roc z On F When the receiver home theater is set to On you can hear sound output from the Setup TV s Optical jack When the TV is displaying a DTV air signal the TV will send out 5 1 4 Move Enter 5 Return channel sound to the Home theater receiver When the source is a digital component such as a DVD and is connected to the TV via HDMI only 2 channel sound will be heard from the Home Theater receiver When listening through the receiver there are restrictions for using the audio related menus If there is a power interruption to the TV when the Receiver is set to On by disconnecting the power cord or a power failure the Speaker Select may be set to External Speaker when you turn the TV on again see page 21 Ce e Troubleshooting for Anynet Symptom Solution Anynet does not work Check if the device is an Anynet device The Anynet system supports Anynet devices only Connect only one receiver home theater Check if the Anynet device power cord is properly connected Check the Anynet device s Video Audio HDMI 1 3 cable connections Check whether Anynet HDMI CEC is set to On in the Anynet setup menu Check whether the TV rem
61. echnology enables you to set picture movement up down Vertical and side to side Horizontal The Time setting allows you to program the time between movement of the picture in minutes Set Pixel Shift to On by pressing the A or V button then press the ENTER button Select the required option by pressing the A or V button then press the ENTER s button Available options Horizontal Vertical Time Z Optimum condition for pixel shift o ltem TV Ext AV Component HDMI PC Horizontal 2 Vertical 0 4 4 Time minute 2 min The Pixel Shift value may differ depending on the monitor size inches and mode This function is not available in the Screen Fit mode Scrolling This function helps remove after images on the screen by moving all the pixels on the PDP according to a pattern Use this function when there are remaining after images or symbols on the screen especially when you displayed a still image on the screen for a long time Side Grey When you watch TV with the screen ratio of 4 3 the screen is prevented from any damage by adjusting the white balance on both extreme left and right sides Light When you set the screen ratio to 4 3 it brightens the left and right sides Dark When you set the screen ratio to 4 3 it darkens the left and right sides Picture Reset Reset Picture Mode Cancel Resets all picture settings to the default values Advanced Setting Picture Options Select a picture mode t
62. ection status will appear In this case insert the USB fl ion device exit the screen by pressing the MEDIA P button on the remote control and enter the AV Media Play screen again Media Play only supports USB Mass Storage Class devices MSC MSC is a Mass Storage Class Bulk Only Transport device Examples of MSC are Thumb drives and Flash Card Readers Both USB HDD and HUB are not supported MTP Media Transfer Protocol is not supported The file system only supports FAT16 32 The NTFS file system is not supported Certain types of USB Digital camera and audio devices may not be compatible with this TV Please connect directly to the USB port of your TV If you are using a separate cable connection there may be a USB compatibility problem Before connecting your device to the TV please back up your files to prevent them from damage or loss of data SAMSUNG is not responsible for any data file damage or data loss Do not disconnect the USB device while it is loading MSC supports MP3 and JPEG files while a PTP device supports JPEG files only The sequential JPEG format is supported The higher the resolution of the image the longer it takes to display on the screen The maximum supported JPEG resolution is 15360X8640 pixels For unsupported or corrupted files the Not Supported File Format message is displayed If the number of photo files exceeds 4000 or the number of music files exceeds 3000 any files exceeding the 40
63. election LIST FLOF Teletext store Teletext size Teletext reveal Fastext topic selection Teletext display mix both teletext information and the normal broadcast Teletext sub page P Teletext next page P Teletext previous page Teletext index Teletext hold Teletext cancel i E i i Pre cH 1 ju ra e L2 Sip E rh gel gets fot T 1 1 i 1 1 LIII Pre 1 e 1 4 1 1 1 1 1 1 1 SAMSUNG English 7 Installing Batteries in the Remote Control Lift the cover at the back of the remote control upward as shown in the figure 2 Install two AAA size batteries Make sure to match the and ends of the batteries with the diagram inside the compartment 3 Close the cover Remove the batteries and store them in a cool dry place if you won t be using the remote control for a long time Ifthe remote control doesn t work check the following 1 Is the TV power on 2 Are the plus and minus ends of the batteries reversed 3 Are the batteries drained 4 Is there a power outage or is the power cord unplugged 5 Is there a special fluorescent light or neon sign nearby Switching On and Off The mains lead is attached to the rear of your set 1 Plug the mains lead into an appropriate socket The standby indicator lights up on your set 2 Press the POWER button on your set You also can press the POWER button or th
64. ens look different the same basic set up information will apply in almost all cases If not contact your computer manufacturer or Samsung Dealer First click on Control Panel on the Windows start menu 2 When the control panel window appears click on Appearance and Themes and a display dialog box will appear 3 When the control panel window appears click on Display and a display dialog box Display will appear Plug and Play Monitor on NVIDIA GeForce FX 5600 n i i d Screen resolution Color quality 4 Navigate to the Settings tab on the display dialog box Less J Moe Highest 22 bi vj The correct size setting resolution 1920 by1080 pixels EEUEPTGUESEENUENEN Optimum 1920 X 1080 pixels If a vertical frequency option exists on your display settings dialog box the correct value is 60 or 60 Hz Otherwise just click OK and exit the dialog box Q Display Modes Both screen position and size will vary depending on the type of PC monitor and its resolution The resolutions in the table are recommended D Sub and HDMI DVI Input Mode Resolution Horizontal Frequency kHz Vertical Frequency Hz Pixel Clock Frequency MHz Sync Polarity H V IBM 640 x 350 31 469 70 086 25 175 720 x 400 31 469 70 087 28 322 640 x 480 35 000 66 667 30 240 MAC 832 x 624 49 726 74 551 57 284 1152 x 870 68 681 75 062 100 000 720 x 576 35 910 59
65. erms and this License would be to refrain entirely from conveying the Program Use with the GNU Affero General Public License Notwithstanding any other provision of this License you have permission to link or combine any covered work with a work licensed under version 3 of the GNU Affero General Public License into a single combined work and to convey the resulting work The terms of this License will continue to apply to the part which is the covered work but the special requirements of the GNU Affero General Public License section 13 concerning interaction through a network will apply to the combination as such Revised Versions of this License The Free Software Foundation may publish revised and or new versions of the GNU General Public License from time to time Such new versions will be similar in spirit to the present version but may differ in detail to address new problems or concerns Each version is given a distinguishing version number If the Program specifies that a certain numbered version of the GNU General Public License or any later version applies to it you have the option of following the terms and conditions either of that numbered version or of any later version published by the Free Software Foundation If the Program does not specify a version number of the GNU General Public License you may choose any version ever published by the Free Software Foundation If the Program specifies that a proxy can decide which future versi
66. et the Clock Mode is displayed Press the ENTERL button Press the A or V button to select Auto then Press the ENTERS button If you select Manual Set current date and time is displayed refer to page 24 If you have received a digital signal the time will be set automatically If not see page 24 to set the clock Press the A or V button to highlight the time zone for your local area and to move the highlight to the appropriate time zone on the map of the Australia Press the ENTER L button The brief instruction on How to get the best performance from your new HDTV is displayed Press the ENTERS button You can change previous or next page by pressing the lt or gt button This menu is available HD Connection Guide in the Support menu The message Enjoy your TV is displayed When you have finished press the ENTER L button SSS Press the MENU button to display the menu Press the A or V button to select Setup then press the ENTERL button Time Press the ENTERS button again to select Plug amp Play a Enter your 4 digit PIN number The default PIN number of a new TV set is i Child Lock 0 0 0 0 Change PIN Parental Lock If you want to change PIN number refer to 22 page Subtit uptitie The Plug amp Play feature is only available in the TV mode EE eancliade Any previous settings and adjustments will remain including the picture mode All Channel settings will be lost For home viewing ensure the pictu
67. ext Disable Enable Not available in all locations Teletext Language If the programme is broadcast with digital text this feature is enabled i hs MHEG Multimedia and Hypermedia Information Coding Experts Group AC HUC a An International standard for data encoding systems used in multimedia and Melody Medium hypermedia This is at a higher level than the MPEG system which includes Energy Saving Off data linking hypermedia such as still images character service animation graphic and video files as well as multimedia data MHEG is user runtime interaction technology and is being applied to various fields including VOD Video On Demand ITV Interactive TV EC Electronic Commerce tele education tele conferencing digital libraries and network games Melody Off Low Medium High The TV power on off melody sound can be adjusted The Melody does not play When no sound is output from the TV because the amp K MUTE button has been pressed When no sound is output from the TV because the ii Volume button has been pressed When the TV is turned off by Sleep Timer function Energy Saving This feature adjusts the brightness of the TV in order to reduce power consumption When watching TV at night set the Energy Saving mode option to High to reduce eye fatigue as well as power consumption Off Turns off the energy saving function Low Sets the TV to low energy saving mode Medium
68. f further modification of the contributor version For purposes of this definition control includes the right to grant patent sublicenses in a manner consistent with the requirements of this License Each contributor grants you a non exclusive worldwide royalty free patent license under the contributor s essential patent claims to make use sell offer for sale import and otherwise run modify and propagate the contents of its contributor version In the following three paragraphs a patent license is any express agreement or commitment however denominated not to enforce a patent such as an express permission to practice a patent or covenant not to sue for patent infringement To grant such a patent license to a party means to make such an agreement or commitment not to enforce a patent against the party If you convey a covered work knowingly relying on a patent license and the Corresponding Source of the work is not available for anyone to copy free of charge and under the terms of this License through a publicly available network server or other readily accessible means then you must either 1 cause the Corresponding Source to be so available or 2 arrange to deprive yourself of the benefit of the patent license for this particular work or 3 arrange in a manner consistent with the requirements of this License to extend the patent license to downstream recipients Knowingly relying means you have actual knowledge that b
69. files press the TOOLS button and select Deselect All 3 Press the L J Play ENTER CS button Only the selected file is played 1 Music Play Tools Menu Repeat Mode On Off You can play music files repeatedly Repeat Mode Picture Setting Sound Setting E Refer to page 33 Information Remove Safely Information mE Move 4 Adjust gt i Exit The music file information is displayed Remove Safely You can remove the device safely from the TV English 32 Picture Music Settings Using Media Play When watching a SlideShow or listening to music using Media Play you can set the picture and sound o Picture Setting 1 Press the TOOLS button during a Slide Show or while music is playing 2 Press the A or V button to select Picture Setting 3 Press the lt or gt button to select the Picture Mode Dynamic Standard Eco or Movie 4 Press the A or V button to move to an item Contrast Brightness Color Dynamic Contrast Black Tone or Reset Select Reset to initialize the picture settings 5 Press the lt or gt button to adjust the settings QO Sound Setting 1 Press the TOOLS button during a Slide Show or while music is playing 2 Press the A or V button to select Sound Setting 3 Press the lt or gt button to select the Sound Mode Standard Music Movie Clear voice or Custom 4 Press the A or V button to move to an item Balance 100Hz 300Hz 1kHz 3kHz 10kHz Bandwidth
70. gate covered works that you do not convey without conditions so long as your license otherwise remains in force You may convey covered works to others for the sole purpose of having them make modifications exclusively for you or provide you with facilities for running those works provided that you comply with the terms of this License in conveying all material for which you do not control copyright Those thus making or running the covered works for you must do so exclusively on your behalf under your direction and control on terms that prohibit them from making any copies of your copyrighted material outside their relationship with you Conveying under any other circumstances is permitted solely under the conditions stated below Sublicensing is not allowed section 10 makes it unnecessary 3 Protecting Users Legal Rights From Anti Circumvention Law No covered work shall be deemed part of an effective technological measure under any applicable law fulfilling obligations under article 11 of the WIPO copyright treaty adopted on 20 December 1996 or similar laws prohibiting or restricting circumvention of such measures When you convey a covered work you waive any legal power to forbid circumvention of technological measures to the extent such circumvention is effected by exercising rights under this License with respect to the covered work and you disclaim any intention to limit operation or modification of the work as a means of enforcing against
71. he Corresponding Source of the work is not available for anyone to copy free of charge and under the terms of this License through a publicly available network server or other readily accessible means then you must either 1 cause the Corresponding Source to be so available or 2 arrange to deprive yourself of the benefit of the patent license for this particular Work or 3 arrange in a manner consistent with the requirements of this License to extend the patent license to downstream recipients Knowingly relying means you have actual knowledge that but for the patent license your conveying the covered work in a country or your recipient s use of the covered work in a country would infringe one or more identifiable patents in that country that you have reason to believe are valid If pursuant to or in connection with a single transaction or arrangement you convey or propagate by procuring conveyance of a covered work and grant a patent license to some of the parties receiving the covered work authorizing them to use propagate modify or convey a specific copy of the covered work then the patent license you grant is automatically extended to all recipients of the covered work and works based on it A patent license is discriminatory if it does not include within the scope of its coverage prohibits the exercise of or is conditioned on the non exercise of one or more of the rights that are specifically granted under this License You ma
72. he internal amplifier The a x MUTE buttons do not operate when the Speaker Select is set to External Speaker If you select External Speaker in the Speaker Select menu the sound settings will be limited Audio Out Optical L R Out to Sound System TV AV Component PC HDMI TV Speaker Sound Output External Speaker Sound Output Q Sound Reset Reset All Reset Sound Mode Cancel Auto Volume Off You can restore the Sound settings to the factory defaults E RIDNASIPAIENGI Selecting the Sound Mode When you set to Dual I Il the current sound mode is displayed on the screen Type of broadcast On screen indication Regular broadcast Standard audio Mono Normal use Mono Regular NICAM Mono NICAM ono Stereo NICAM Stereo Stereo UT Normal NICAM NICAM Mono Dual 1 id Dual 2 zd Normal Regular broadcast AD Standard audio Mono Normal use Bilingual or DUAL I II Dual Dual Il Stereo Mone If the stereo signal is weak and an automatic switching occurs then switch to the mono This function is only activated in stereo sound signal It is deactivated in mono sound signal This function is only available in TV mode You can select these options simply by pressing the DUAL button on the remote E control DUAL ay 3 NICAM Dual I II G9 CS CS C9 English 21 Function Description Configuring the Setup Menu L Game Mode Plug amp Play When connecting to a game consol
73. ice name appears at the bottom left of the screen 4 Press the lt or gt button to select an icon Photo Music Setup then press the ENTERC button To exit Media Play mode press the MEDIA P button on the remote control Removing a USB Memory Device Safely You can remove the device safely from the TV 1 Press the TOOLS button in the Media Play file list screen or while a SlideShow or music file is being played ice show o mE li 2 cdd the A or V button to select Remove Safely then press the ENTERC m3 3 Remove the USB device from the TV USB W Device Select 3 Tools Return Screen Display Currently selected file The currently selected file is highlighted View Groups The sorting group including the currently selected photo is highlighted Current Device Shows the currently selected device name Item Selection Information Shows the number of photos that are selected by pressing the Yellow button Help Items Red Device button Selects a connected device e Yellow Select button Selects file from the file list Selected files are marked with a symbol V Press the yellow button again to cancel a file selection 5 TOOLS Tools button Displays the option menus The tools menu changes according to the current status Return Return button Return to previous menu English 28 4 Using the Remote Control Button in Media Play Menu Button Operations AlV lt gt Move the cursor a
74. ily used for software interchange Convey the object code in or embodied in a physical product including a physical distribution medium accompanied by a written offer valid for at least three years and valid for as long as you offer spare parts or customer support for that product model to give anyone who possesses the object code either 1 a copy of the Corresponding Source for all the software in the product that is covered by this License on a durable physical medium customarily used for software interchange for a price no more than your reasonable cost of physically performing this conveying of source or 2 access to copy the Corresponding Source from a network server at no charge c Convey individual copies of the object code with a copy of the written offer to provide the Corresponding Source This alternative is allowed only occasionally and noncommercially and only if you received the object code with such an offer in accord with subsection 6b b English 47 d Convey the object code by offering access from a designated place gratis or for a charge and offer equivalent access to the Corresponding Source in the same way through the same place at no further charge You need not require recipients to copy the Corresponding Source along with the object code If the place to copy the object code is a network server the Corresponding Source may be on a different server operated by you or a third party that supports equiv
75. is program is distributed in the hope that it will be useful but WITHOUT ANY WARRANTY without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE See the GNU General Public License for more details You should have received a copy of the GNU General Public License along with this program If not see http www gnu org licenses gt Also add information on how to contact you by electronic and paper mail If the program does terminal interaction make it output a short notice like this when it starts in an interactive mode program Copyright C year name of author This program comes with ABSOLUTELY NO WARRANTY for details type show w This is free software and you are welcome to redistribute it under certain conditions type show c for details The hypothetical commands show w and show c should show the appropriate parts of the General Public License Of course your program s commands might be different for a GUI interface you would use an about box You should also get your employer if you work as a programmer or school if any to sign a copyright disclaimer for the program if necessary For more information on this and how to apply and follow the GNU GPL see lt http www gnu org licenses gt The GNU General Public License does not permit incorporating your program into proprietary programs If your program is a subroutine library you may consider it more useful t
76. ish to avoid the special danger that patents applied to a free program could make it effectively proprietary To prevent this the GPL assures that patents cannot be used to render the program non free The precise terms and conditions for copying distribution and modification follow TERMS AND CONDITIONS 0 Definitions This License refers to version 3 of the GNU General Public License Copyright also means copyright like laws that apply to other kinds of works such as semiconductor masks The Program refers to any copyrightable work licensed under this License Each licensee is addressed as you recipients may be individuals or organizations To modify a work means to copy from or adapt all or part of the work in a fashion requiring copyright permission other than the making of an exact copy The resulting work is called a modified version of the earlier work or a work based on the earlier work A covered work means either the unmodified Program or a work based on the Program To propagate a work means to do anything with it that without permission would make you directly or secondarily liable for infringement under applicable copyright law except executing it on a computer or modifying a private copy Propagation includes copying distribution with or without modification making available to the public and in some countries other activities as well To convey a work means any kind of prop
77. l Public License is a free copyleft license for software and other kinds of works The licenses for most software and other practical works are designed to take away your freedom to share and change the works By contrast the GNU General Public License is intended to guarantee your freedom to share and change all versions of a program to make sure it remains free software for all its users We the Free Software Foundation use the GNU General Public License for most of our software it applies also to any other work released this way by its authors You can apply it to your programs too When we speak of free software we are referring to freedom not price Our General Public Licenses are designed to make sure that you have the freedom to distribute copies of free software and charge for them if you wish that you receive source code or can get it if you want it that you can change the software or use pieces of it in new free programs and that you know you can do these things To protect your rights we need to prevent others from denying you these rights or asking you to surrender the rights Therefore you have certain responsibilities if you distribute copies of the software or if you modify it responsibilities to respect the freedom of others For example if you distribute copies of such a program whether gratis or for a fee you must pass on to the recipients the same freedoms that you received You must make sure that they too receive or c
78. l terms to the whole of the work and all its parts regardless of how they are packaged This License gives no permission to license the work in any other way but it does not invalidate such permission if you have separately received it If the work has interactive user interfaces each must display Appropriate Legal Notices however if the Program has interactive interfaces that do not display Appropriate Legal Notices your work need not make them do so A compilation of a covered work with other separate and independent works which are not by their nature extensions of the covered work and which are not combined with it such as to form a larger program in or on a volume of a storage or distribution medium is called an aggregate if the compilation and its resulting copyright are not used to limit the access or legal rights of the compilation s users beyond what the individual works permit Inclusion of a covered work in an aggregate does not cause this License to apply to the other parts of the aggregate 6 Conveying Non Source Forms You may convey a covered work in object code form under the terms of sections 4 and 5 provided that you also convey the machinereadable Corresponding Source under the terms of this License in one of these ways d a Convey the object code in or embodied in a physical product including a physical distribution medium accompanied by the Corresponding Source fixed on a durable physical medium customar
79. lay ENTER Cs button This menu only shows files with the MP3 file extension Files with other file extensions are not displayed even if they are saved on the same USB device C REW or C FF buttons do not function during play The selected file is displayed at the top with its playing time To adjust the music volume press the volume button on the remote control To mute the sound press the amp MUTE button on the remote control The playing duration of a music file may be displayed as 00 00 00 if its playing time information is not found at the start of the file 4 v Y i gt 00 00 02 00 04 55 Geek In The Pink 4 When I Dream Ls Pause 4 gt Previous Next 43 Tools S Return CS Music Play Control Buttons ENTERCs Play Pauses the music file C Exit play mode and return to the music list E Play the music file 4 TOOLS Run various functions from the Music menus CJ Pause the music file Music function information icon v When all music files in the folder or the selected file are repeated Repeat Mode is On Cy When all music files in the folder or the selected file are played once Repeat Mode is Off o Playing the selected music files 1 Press the lt or gt button to select the desired music file in the music list 2 Press the yellow button Repeat the above operation to select multiple music files The v mark appears to the left of the selected music file To deselect all selected
80. les reserving a recording for the recorder This is only available for devices that support the recording reservation function Stop Recording recorder Stops recording Receiver Sound is played through the receiver If more than one recording device is connected they are displayed as recorder and if only one recording device is connected it will be represented as device name o TV Remote Control Buttons Available in Anynet Mode Device Type Operating Status Available Buttons After switching to the device when the Numeric buttons menu of the corresponding device is A Y14 ENTERUS buttons displayed on the screen Colour buttons EXIT button After switching to the device while C Backward search Forward search Stop C J Play playing a file cJ Pause Device with After switching to the device when you ane built in Tuner are watching a TV programme P L button i i TI A button Audio Device When Receiver is activated The Anynet function only works when the active source on the TV remote control is set to TV The button works only while in the recordable state You cannot control Anynet devices using the buttons on the TV You can control Anynet devices only using the TV remote control The TV remote control may not work under certain conditions In this case reselect the Anynet device The Anynet functions do not operate with other manufacturers products The o
81. ly connected Check whether Anynet HDMI CEC is set to On in the Anynet setup menu Search Anynet devices again You can connect an Anynet device using the HDMI 1 3 cable only Some HDMI cables may not support Anynet functions e fitis terminated by an abnormal situation such as disconnecting the HDMI cable or power cord or a power failure please repeat the device scan The TV programme cannot be Check whether the antenna jack on the recording device is properly connected recorded The TV sound is not output Connect the optical cable between TV and the receiver through the receiver English 37 Recommendations for Use Teletext Feature Most television stations provide written information services via Teletext The index page of the teletext service gives you information on how to use the service In addition you can select various options to suit your requirements by using the remote control buttons fA e CS For teletext information to be displayed correctly channel reception must be stable Otherwise information may be missing or some pages may not be displayed exit Exit from the teletext display index Used to display the index contents page at any time while you are viewing teletext E store Used to store the teletext pages 1 2 L3 ED sizo C C8 C9 Press to display the double size letters in the upper half of the screen For lower half of the screen press it
82. mer is set to On in the Setup menu f connected the TV to your PC check your PC power settings TV turns off automatically Make sure the AC power cord is plugged in securely to the wall outlet and the TV e If there is no signal for about 10 15 minutes with Antenna Cable connection the TV will turn off Check cable connections remove and reconnect all cables of TV and external devices Set your external device s Cable Sat Box DVD Blu ray etc video output to match the connections to the TV input For example external device s output HDMI TV s No picture Video input HDMI Make sure your connected device is powered on Make sure to select the TV s correct source by pressing the SOURCE button on the remote control Reboot the connected device by reconnecting the device s power cable RF Cable Antenna Connection e Make sure coaxial cable is connected securely Please try Plug amp Play to add available channels to the channel list Go to MENU Setup Plug amp Play and wait for all available channels are stored Verify Antenna is positioned correctly Cannot receive all channels Compression of video contents may cause picture distortion especially on fast moving Picture is distorted macroblock small pictures such as sports and action movies block dots pixelization Low signal level can cause picture distortion This is not a TV issue Have the antenna accessed PC Co
83. n them onto the wall Confirm that the screws have been firmly installed onto the wall You may need additional material such as an anchor depending on the type of wall Since the necessary clamps screws and string are not supplied please purchase these additionally 2 Remove the screws from the center back of the TV put the screws into the clamps and then fasten the screws onto the TV again Screws may not be supplied with the product 3 Connect the clamps fixed onto the TV and the clamps fixed onto the wall with a strong string and then tie the string tightly Install the TV near to the wall so that it does not fall backwards It is safe to connect the string so that the clamps fixed on the wall are equal to or lower than the clamps fixed on the TV Untie the string before moving the TV 4 Verify all connections are properly secured Periodically check connections for any sign of fatigue for failure If you have any doubt about the security of your connections contact a professional installer Securing the Installation Space Keep the required distances between the product and other objects e g walls to ensure proper ventilation Failing to do so may result in fire or a problem with the product due to an increase in the internal temperature of the product Install the product so the required distances shown in the figure are kept When using a stand or wall mount use parts provided by Samsung Electronics only f you use parts pro
84. nd select an item ENTERS Select the EUH selgciga bell E Play or pause the files while playing the slide show or music files C3 C9 Play or pause the Slide Show or Music file RETURN Return to the previous menu TOOLS Run various functions from the Photo Music and Movie menus C Stop the current slide show Music or Movie file INFO Show file information MEDIA P Exit Media Play mode P A lv Stop Media Play mode and Returns to TV mode EXIT Stop the current function and return to the Media Play main menu Using and Sorting Photo List You can sort photos in the Photo List by a particular standard 1 Press the MEDIA P button on the remote control to display the Media Play menu 2 Press the lt or gt button to select Photo then press the ENTER C button 3 Press the C Play ENTERC button to start the Slide Show in the order selected by the user The information of a photo file is automatically set Photos for which information cannot be displayed are set as Unclassified PTP does not support folder sort mode Select X3 Tools Return Photo List Tools Menu Slide Show You can play a Slide Show using the photo files on the USB memory device Play Current Group You can play a Slide Show using only the photo files in the currently selected sorting group a iin Information The photo file information including the name the size the resolution the date modified and the path iS displayed S USB MH Device Select 3 To
85. nnection Not Supported Mode message Set your PC s output resolution so it matches the resolutions supported by the TV PC is always shown on source list even This is normal PC is always shown on the source list even though a PC is not if not connected connected Video is OK but there is no audio with HDMI connection Check the audio output setting on your PC Continued English 43 Problem Possible Solution Others Picture is not shown in full screen Remote control does not work Plasma TV is making humming noise Image Retention Burn In Issue Black bars on each side will be shown on HD channels when displaying upscaled SD 4 3 contents Black bars on Top amp Bottom will be shown on movies that have aspect ratios different from your TV Adjust picture size option on your external device or TV to full screen Replace the remote control batteries with correct polarity Clean the transmission window located on the top of the remote Try pointing the remote directly at the TV from 5 6 feet away Plasma TVs typically make a soft humming sound This is normal It s caused by the electrical charges that are used to create the images on the screen If the humming sound is loud you may have set the brightness on the TV too high Try setting the brightness lower You can also have loud humming if the back of your Plasma TV is too close to a wall or other hard surface Also try rerouting
86. o be reset The reset is performed for each picture mode English 17 Setting up the TV with your PC Preset Press the SOURCE button to select PC mode Brightness Sharpness DU a Screen LY Auto Adjustment Auto Adjustment allows the PC screen of set to self adjust to the incoming PC video signal The values of fine coarse and position are adjusted automatically Advanced Setting This function does not work in DVI HDMI mode Picture Options Picture Reset al Press the TOOLS button to display Tools menu You can also set the adjustment by selecting Tools Auto Adjustment Screen Coarse Adjusts the frequency when vertical noise appears on the screen Fine Adjusts the screen to be clearer PC Position Adjust the PC s screen positioning if it does not fit the TV screen Press the A or V button to adjusting the Vertical Position Press the lt or gt button to adjust the Horizontal Position Image Reset You can replace all image settings with the factory default values English 18 PC Display Q Setting Up Your PC Software Based on Windows XP The Windows display settings for a typical computer are shown below The actual Display Properties screens on your PC will probably be different depending upon your particular version Themes Desktop Screen Saver Appearance Settnas of Windows and your particular video card However even if your actual scre
87. o permit linking proprietary applications with the library If this is what you want to do use the GNU Lesser General Public License instead of this License But first please read http www gnu org philosophy why not lIgpl html The OpenSSL toolkit stays under a dual license i e both the conditions of the OpenSSL License and the original SSLeay license apply to the toolkit See below for the actual license texts Actually both licenses are BSD style Open Source licenses In case of any license issues related to OpenSSL please contact openssl core openssl org OpenSSL License Copyright c 1998 2007 The OpenSSL Project All rights reserved Redistribution and use in source and binary forms with or without modification are permitted provided that the following conditions are met 1 Redistributions of source code must retain the above copyright notice this list of conditions and the following disclaimer 2 Redistributions in binary form must reproduce the above copyright notice this list of conditions and the following disclaimer in the documentation and or other materials provided with the distribution 3 All advertising materials mentioning features or use of this software must display the following acknowledgment This product includes software developed by the OpenSSL Project for use in the OpenSSL Toolkit http www openssl org 4 The names OpenSSL Toolkit and OpenSSL Project must not be used to endorse or promote products
88. o select multiple photos The v mark appears to the left of the selected photo To deselect all selected files press the TOOLS button and select Deselect All 3 Press the gt J Play ENTERC button The selected files will be used for the Slide Show Q Slide Show Tools Menu Stop Slide Show Start Slide Show You can start or stop a SlideShow Stop Slide Show Slide Show Speed Normal Slow Fast 4 ik po ME bons You can select the slide show speed only during the slide show Ib m ue es You can also change the speed of the Slide Show by pressing the amp 3 REW or ADs Vide Picture Setting C FF button during the Slide Show id Wr ess UN Rotate 0 90 180 270 74 Remove Safely You can rotate photos saved on a USB memory device 7 4 j Move Enter Exit The rotated file is not saved en tr NRE S STRAY Zoom x1 x2 x4 You can magnify photos saved on a USB memory device To move the enlarged photo image press the ENTERCS button then press the A lt P buttons Note that when the enlarged picture is smaller than the original screen size the location change function doesn t work The enlarged file is not saved Background Music You can set and select background music when watching a Slide Show To use this feature there must be music on the USB device Loading music files is needed to change BGM mode Play music files in music category to load e Background Music On Off
89. of it Patents A contributor is a copyright holder who authorizes use under this License of the Program or a work on which the Program is based The work thus licensed is called the contributor s contributor version A contributor s essential patent claims are all patent claims owned or controlled by the contributor whether already acquired or hereafter acquired that would be infringed by some manner permitted by this License of making using or selling its contributor version but do not include claims that would be infringed only as a consequence of further modification of the contributor version For purposes of this definition control includes the right to grant patent sublicenses in a manner consistent with the requirements of this License Each contributor grants you a non exclusive worldwide royalty free patent license under the contributor s essential patent claims to make use sell offer for sale import and otherwise run modify and propagate the contents of its contributor version In the following three paragraphs a patent license is any express agreement or commitment however denominated not to enforce a patent such as an express permission to practice a patent or covenant not to sue for patent infringement To grant such a patent license to a party means to make such an agreement or commitment not to enforce a patent against the party If you convey a covered work knowingly relying on a patent license and t
90. ols 9 Return You can view the information of photo files during a Slide Show using the same procedures Alternatively select a photo from the photo list and press the INFO button to view the information Remove Safely You can remove the device safely from the TV English 29 Viewing a Photo or Slide Show Viewing a Slide Show ne 1 Press the lt or gt button to select the desired photo in the Photo list ale ee eee ae 2 Press the TOOLS button T E 3 Press the A or V button to select Slide Show then press the ENTER C button All files in the photo list will be used for the Slide Show During the slide show files are displayed in order from the currently shown file The Slide Show progresses in the order sorted in the Photo list A 0 Ln Music files can be automatically played during the Slide Show if the Background e RRS Music is set to On While a photo list is displayed press the C gt Play ENTERC button on the remote control to start slide show SlideShow Control Buttons ENTERC Play Pauses the Slide Show p Exit Slide Show and return to the photo list CJ Play the Slide Show 4 TOOLS Run various functions from the Photo menus C Pause the Slide Show J C Change the SlideShow playing speed Q Playing the selected photo files 1 Press the lt or gt button to select the desired photo in the Photo list 2 Press the yellow button Repeat the above operation t
91. on use the GNU General Public License for most of our software it applies also to any other work released this way by its authors You can apply it to your programs too When we speak of free software we are referring to freedom not price Our General Public Licenses are designed to make sure that you have the freedom to distribute copies of free software and charge for them if you wish that you receive source code or can get it if you want it that you can change the software or use pieces of it in new free programs and that you know you can do these things To protect your rights we need to prevent others from denying you these rights or asking you to surrender the rights Therefore you have certain responsibilities if you distribute copies of the software or if you modify it responsibilities to respect the freedom of others For example if you distribute copies of such a program whether gratis or for a fee you must pass on to the recipients the same freedoms that you received You must make sure that they too receive or can get the source code And you must show them these terms so they know their rights Developers that use the GNU GPL protect your rights with two steps 1 assert copyright on the software and 2 offer you this License giving you legal permission to copy distribute and or modify it For the developers and authors protection the GPL clearly explains that there is no warranty for this free software For both users
92. on but permits relicensing or conveying under this License you may add to a covered work material governed by the terms of that license document provided that the further restriction does not survive such relicensing or conveying If you add terms to a covered work in accord with this section you must place in the relevant source files a statement of theadditional terms that apply to those files or a notice indicating where to find the applicable terms Additional terms permissive or non permissive may be stated in the form of a separately written license or stated as exceptions the above requirements apply either way Termination You may not propagate or modify a covered work except as expressly provided under this License Any attempt otherwise to propagate or modify it is void and will automatically terminate your rights under this License including any patent licenses granted under the third paragraph of section 11 However if you cease all violation of this License then your license from a particular copyright holder is reinstated a provisionally unless and until the copyright holder explicitly and finally terminates your license and b permanently if the copyright holder fails to notify you of the violation by some reasonable means prior to 60 days after the cessation Moreover your license from a particular English 48 copyright holder is reinstated permanently if the copyright holder notifies you of the violati
93. on by some reasonable means this is the first 10 11 12 13 time you have received notice of violation of this License for any work from that copyright holder and you cure the violation prior to 30 days after your receipt of the notice Termination of your rights under this section does not terminate the licenses of parties who have received copies or rights from you under this License If your rights have been terminated and not permanently reinstated you do not qualify to receive new licenses for the same material under section 10 Acceptance Not Required for Having Copies You are not required to accept this License in order to receive or run a copy of the Program Ancillary propagation of a covered work occurring solely as a consequence of using peer to peer transmission to receive a copy likewise does not require acceptance However nothing other than this License grants you permission to propagate or modify any covered work These actions infringe copyright if you do not accept this License Therefore by modifying or propagating a covered work you indicate your acceptance of this License to do so Automatic Licensing of Downstream Recipients Each time you convey a covered work the recipient automatically receives a license from the original licensors to run modify and propagate that work subject to this License You are not responsible for enforcing compliance by third parties with this License An entity transaction
94. on itself materially and adversely affects the operation of the network or violates the rules and protocols for communication across the network Corresponding Source conveyed and Installation Information provided in accord with this section must be in a format that is publicly documented and with an implementation available to the public in source code form and must require no special password or key for unpacking reading or copying Additional Terms Additional permissions are terms that supplement the terms of this License by making exceptions from one or more of its conditions Additional permissions that are applicable to the entire Program shall be treated as though they were included in this License to the extent that they are valid under applicable law If additional permissions apply only to part of the Program that part may be used separately under those permissions but the entire Program remains governed by this License without regard to the additional permissions When you convey a copy of a covered work you may at your option remove any additional permissions from that copy or from any part of it Additional permissions may be written to require their own removal in certain cases when you modify the work You may place additional permissions on material added by you to a covered work for which you have or can give appropriate copyright permission Notwithstanding any other provision of this License for material you add to a
95. on screen menus disappear from the screen after about one minute Standard Cell Light jm Contrast 99 Brightness 45 Sharpness 50 Colour 50 Tint G R G50 R50 Advanced Settings Using the TOOLS Button You can use the TOOLS button to select your frequently used functions quickly and easily The Tools menu changes depending on which external input mode you are viewing 1 Press the TOOLS button The Tools menu will appear 2 Press the A or V button to select a menu then press the ENTER LY button 3 Press the A V lt gt ENTERS buttons to display change or use the selected items For a more detailed description of each function refer to the corresponding page Anynet HDMI CEC see page 35 YE Anynet HDMI CEC Picture Mode see page 15 Picture Mode Standard e Sound Mode see page 20 Sound Mode Custom Sleep Timer Off SRS TS HD Off Sleep Timer see page 24 SRS TS HD see page 20 Energy Saving see page 23 Add to Favourite or Delete from Favourite see page 13 Auto Adjustment see page 18 en ay Energy Saving Off Add to Favourite English 9 Plug amp Play Feature When the TV is initially powered on basic settings proceed automatically and subsequently Z A 1 If you want to return to this feature i The Screen Saver is activated if there is no remote control key input for longer than 1 minute while Plug amp Play is running The Screen Saver i
96. on the remote control Reserving a programme will be shown on Programmed menu Digital Programme Guide and Viewing Reservation When a digital channel is selected and you press the 9 button the Programme Guide for the channel appears You can reserve a programme according to the procedures described above Select All Deselect All S f fe Select All You can select all the channels in the channel list Deselect All You can deselect all the selected channels in the channel list You can perform the add delete add to Favourites delete from Favourites or lock unlock function for multiple channels at the same time Select the required channels and press the yellow button to set all the selected channels at the same time The v mark appears to the left of the selected channels You can only select Deselect All when there is a selected channel Auto Store For further details on setting up options refer to page 11 If a channel is locked using the Child Lock function the PIN input window appears Channel List Tools Menu in Programmed You can view modify or delete a reservation Press the TOOLS button to use the tools menu E 1 1 2009 3 30 5 Change Info a 18 59 Cancel Schedules Select to change a viewing reservation RR Information Cancel Schedules Select to cancel a viewing reservation Information SelectAll 21 59 All Zoom W Select o Tools C Information Select to view a viewing reservation
97. ons of the GNU General Public License can be used that proxy s public statement of acceptance of a version permanently authorizes you to choose that version for the Program Later license versions may give you additional or different permissions However no additional obligations are imposed on any author or copyright holder as a result of your choosing to follow a later version English 54 15 Disclaimer of Warranty THERE IS NO WARRANTY FOR THE PROGRAM TO THE EXTENT PERMITTED BY APPLICABLE LAW EXCEPT WHEN OTHERWISE STATED IN WRITING THE COPYRIGHT HOLDERS AND OR OTHER PARTIES PROVIDE THE PROGRAM AS IS WITHOUT WARRANTY OF ANY KIND EITHER EXPRESSED OR IMPLIED INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE THE ENTIRE RISK AS TO THE QUALITY AND PERFORMANCE OF THE PROGRAM IS WITH YOU SHOULD THE PROGRAM PROVE DEFECTIVE YOU ASSUME THE COST OF ALL NECESSARY SERVICING REPAIR OR CORRECTION 16 Limitation of Liability IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING WILL ANY COPYRIGHT HOLDER OR ANY OTHER PARTY WHO MODIFIES AND OR CONVEYS THE PROGRAM AS PERMITTED ABOVE BE LIABLE TO YOU FOR DAMAGES INCLUDING ANY GENERAL SPECIAL INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE OR INABILITY TO USE THE PROGRAM INCLUDING BUT NOT LIMITED TO LOSS OF DATA OR DATA BEING RENDERED INACCURATE OR LOSSES SUSTAINED BY YOU OR THIRD PARTIES OR A FAILURE OF THE PRO
98. ontain the covered work unless you entered into that arrangement or that patent license was granted prior to 28 March 2007 Nothing in this License shall be construed as excluding or limiting any implied license or other defenses to infringement that may otherwise be available to you under applicable patent law No Surrender of Others Freedom If conditions are imposed on you whether by court order agreement or otherwise that contradict the conditions of this License they do not excuse you from the conditions of this License If you cannot convey a covered work so as to satisfy simultaneously your obligations under this License and any other pertinent obligations then as a consequence you may not convey it at all For example if you agree to terms that obligate you to collect a royalty for further conveying from those to whom you convey the Program the only way you could satisfy both those terms and this License would be to refrain entirely from conveying the Program Use with the GNU Affero General Public License Notwithstanding any other provision of this License you have permission to link or combine any covered work with a work licensed under version 3 of the GNU Affero General Public License into a single combined work and to convey the resulting work The terms of this License will continue to apply to the part which is the covered work but the special requirements of the GNU Affero General Public License section 13 concerning inter
99. or of coverage For a particular product received by a particular user normally used refers to a typical or common use of that class of product regardless of the status of the particular user or of the way in which the particular user actually uses or expects or is expected to use the product A product is a consumer product regardless of whether the product has substantial commercial industrial or non consumer uses unless such uses represent the only significant mode of use of the product Installation Information for a User Product means any methods procedures authorization keys or other information required to install and execute modified versions of a covered work in that User Product from a modified version of its Corresponding Source The information must suffice to ensure that the continued functioning of the modified object code is in no case prevented or interfered with solely because modification has been made If you convey an object code work under this section in or with or specifically for use in a User Product and the conveying occurs as part of a transaction in which the right of possession and use of the User Product is transferred to the recipient in perpetuity or for a fixed term regardless of how the transaction is characterized the Corresponding Source conveyed under this section must be accompanied by the Installation Information But this requirement does not apply if neither you nor any third party retains the
100. ote control is in TV mode Check whether it is Anynet exclusive remote control e Anynet doesn t work in certain situations Searching channels Operating WISELINK Pro Plug amp Play etc When connecting or removing the HDMI 1 3 cable please make sure to search devices again or turn your TV off and on again Check if the Anynet Function of Anynet device is set on want to start Anynet Check if the Anynet device is properly connected to the TV and check if the Anynet HDMI CEC is set to On in the Anynet Setup menu Press the TV button on the TV remote control to switch to TV Then press the TOOLS button to show the Anynet menu and select a menu you want want to exit Anynet Select View TV in the Anynet menu Press the SOURCE button on the TV remote control and select a device other than Anynet devices Note that the channel button operates only when a tuner embedded Anynet device is not connected The message Connecting to You cannot use the remote control when you are configuring Anynet or switching to a view Anynet device mode appears on the screen Use the remote control when the Anynet setting or switching to view mode is complete The Anynet device does not You cannot use the play function when Plug amp Play is in progress play The connected device is not Check whether or not the device supports Anynet functions displayed Check whether or not the HDMI 1 3 cable is proper
101. ove Safely USB W Device Move b Adjust 5 Return About Anynet Connecting Anynet Devices Anynett is a function that enables you to control all connected Samsung devices that support Anynet with your Samsung TV s remote The Anynet system can be used only with Samsung devices that have the Anynet feature To be sure your Samsung device has this feature check if there is an Anynet logo on it d 1 d To connect to a TV Anynet Device 1 Anynet Device2 Anynett Device3 Anynet Device 4 HDMI OUT lt CL HDMI 1 3 Cable HDMI 1 3 Cable HDMI 1 3 Cable Connect the HDMI IN 1 HDMI IN 2 DVI HDMI IN 3 or HDMI IN 4 jack on the TV and the HDMI OUT jack of the corresponding Anynett device using an HDMI cable To connect to Home Theater Home Theatre Anynet Device 1 LT DIGITALAUDIOIN HDMI OUT HDMI IN co es Optical Cable HDMI 1 3 Cable HDMI 1 3 Cable Anynet Device 2 Anynet Device 3 Anynet Device 4 HDMI OUT
102. perations may differ depending on the device Anynet Device 4 Recording You can make a recording of a TV programme using a Samsung recorder ZA 1 Press the TOOLS button Press the ENTER L button to select Anynet HDMI CEC M 2 Press the A or V button to select Record device name then press the ENTERS button Recording begins DVDR MENU DVDR INFO Receiver 3 On Setup When there is more than one recording device When multiple recording devices are connected the recording devices are listed Press the A or V button to select a recording device and press the ENTERS button Recording begins When the recording device is not displayed Select Device List and press the red button to search devices You can record the source streams by selecting Record device name Pressing the C button will record whatever you are currently watching If you are watching video from another device the video from the device is recorded Before recording check whether the antenna jack is properly connected to the recording device To properly connect an antenna to a recording device refer to the recording device s users manual Move Enter 5 Return English 36 Listening through a Receiver Home theater You can listen to sound through a receiver instead of the TV speaker By nee 1 Press the TOOLS button Press the ENTER L button to select Anynet HDMI CEC 2 Press the A or V button to select R
103. picture settings every 30 minutes Please change from Store Demo mode to Home Use mode in the Plug amp Play procedure Press the SOURCE button to select TV mode go to MENU Setup Plug amp Play ENTER Check cable connections and reconnect Can be caused by using overly rigid or thick cables Make sure the cables are flexible enough for long term use If wall mounting we recommend using cables with 90 degree connectors You may see small particles if you look closely at the edge of the bezel surrounding the TV screen This is part of the product s design and is not a defect Some of above pictures and functions are available at specific models only English 44 Specifications The descriptions and characteristics in this booklet are given for information purposes only and are subject to modification without notice Model Name PS50B550 PS58B550 Screen Size Diagonal 50 inch 58 inch PC Resolution Optimum 1920 x 1080 60 Hz 1920 x 1080 60 Hz Sound Output 10W x2 15Wx2 Dimension WxHxD Body 1240 x 766 x 74 mm 1418 x 866 x 74 mm With stand 1240 x 822 x 290 mm 1418 x 924 x 335 mm Weight Body 33 4 kg 38 kg With stand 38 4 kg 45 kg Environmental Considerations Operating Temperature 50 F to 104 F 10 C to 40 C Operating Humidity 10 to 80 non condensing Storage Temperature 4 F to 113 F 20 C to 45 C Storage Humidity 5 to 95 non condensing This device
104. picture settings to suit your preference Picture Options In PC mode you can only make changes to the Colour Tone Size and Screen Picture Reset Burn Protection from among the items in Picture Options Colour Tone Cool Normal Warm1 Warm2 Warm3 You can select the most comfortable colour tone to your eyes The adjusted values are stored according to the selected Picture mode Warm1 Warm2 or Warm3 is only activated when the picture mode is Movie Size You can select the picture size which best corresponds to your viewing requirements 16 9 Sets the picture to the 16 9 aspect ratio Wide Zoom Magnify the size of the picture more than 4 3 Zoom Magnifies the 16 9 wide picture in the vertical direction to fit the screen size 4 3 Sets the picture to the 4 3 aspect ration Screen Fit Use the function to see the full image without any cutoff when HDMI 720p 1080i 1080p or Component 1080i 1080p signals are input The picture size options may vary depending on the input source The items available may differ depending on the selected mode In PC Mode only 16 9 and 4 3 mode can be adjusted Settings can be adjusted and stored for each external device you have connected to an input of the TV Temporary image retention may occur when viewing a static image on the set for more than two hours After selecting Wide Zoom mode Press the gt button to select Position then press the ENTERS button Press the
105. re mode is set to Standard English 10 Channel Control Storing Channels Qj Country You can change the desired country The PIN number input screen appears Enter your 4 digit PIN number RO eS LE A The default PIN number of a new TV set is 0 0 0 0 Auto Store A Manual Store Auto Store Full Guide Scans for all channels with active broadcast stations and availability depends on your Mini Guide country and stores them in the TV s memory poaae ence You can memorize the Antenna source CS CS C9 S Channel List Digital amp Analogue Digital and Analogue channels Digital Digital channels Analogue Analogue channels If you want to stop Auto Store press the ENTERL button The Stop Auto Store message will be displayed Select Yes by pressing the lt or gt button then press the ENTERL button If a channel is locked using the Child Lock function the PIN input window appears QO Manual Store Scans for a channel manually and stores it in the TV s memory Digital Channel DTV Manual store for digital channels 2 Channel Set the Channel number using the A V or number 0 9 buttons Frequency Set the frequency using the number buttons Bandwidth Set the bandwidth using the A V or number 0 9 buttons When it has finished channels are updated in the channel list Analogue Channel Manual store for analogue channel Programme Programme number to b
106. rn for a fee How to Apply These Terms to Your New Programs If you develop a new program and you want it to be of the greatest possible use to the public the best way to achieve this is to make it free software which everyone can redistribute and change under these terms To do so attach the following notices to the program It is safest to attach them to the start of each source file to most effectively state theexclusion of warranty and each file should have at least the copyright line and a pointer to where the full notice is found one line to give the program s name and a brief idea of what it does Copyright C year name of author This program is free software you can redistribute it and or modify it under the terms of the GNU General Public License as published by the Free Software Foundation either version 3 of the License or at your option any later version This program is distributed in the hope that it will be useful but WITHOUT ANY WARRANTY without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE See the GNU General Public License for more details You should have received a copy of the GNU General Public License along with this program If not see lt http www gnu org licenses Also add information on how to contact you by electronic and paper mail If the program does terminal interaction make it output a short notice like this when it starts in an interactive mode
107. s p CS Media Play USB uoneoi ddy You can also display Anynet menu by selecting Tools Anynet HDMI CEC Setup Anynet HDMI CEC Off On To use the Anynet Function Anynet HDMI CEC must be set to On When the Anynet HDMI CEC function is disabled all the Anynet related operations are deactivated Alnynec Device List Auto Turn Off No Yes Setting an Anynet Device to turn Off Automatically when the TV is Turned Off The active source on the TV remote must be set to TV to use the Anynet function If you set Auto Turn Off to Yes connected external devices are also turned off when the TV is turned off If an external device is still recording it may or may not turn off Move Enter 5 Return Alnynet Anynet HDMI CEC Auto Turn Off Move Enter Return Press the TOOLS button Press the ENTER L button to select Alnynee Anynet HDMI CEC Press the A or V button to select Device List then press the ENTER L button Anynet devices connected to the TV are listed If you cannot find a device you Record want press the red button to scan for devices DVDR MENU Only when you set Anynet HDMI CEC to On in the Setup menu the Device List da n eceiver n menu appears S Press the A or V button to select to a particular device and press the ENTERS a ovo EskEnfer T S iRet m button It is switched to the selected device l Switching to the selected
108. s activated if there is no operating signal for longer than 15 minutes Press the POWER button on the remote control The message Select Home Use Plug amp Play when installing this TV in your home is displayed Select Home Use when installing this TV in your Then press the lt or gt button to select Store Demo or Home Use then the home ENTERS button We recommend setting the TV to Home Use mode for the best picture in your home environment Store Demo mode is only intended for use in retail environments Ifthe unit is accidentally set to Store Demo mode and you want to return to Home Use Standard Press the Volume button on the TV When the volume OSD is displayed press and hold the MENU button on the TV for 5 seconds The factory default setting for the picture will be Standard Standard mode is the recommended home viewing picture mode Press the ENTERL button Select the appropriate country by pressing the A or V button Press the ENTER L button to confirm your choice 4b Move Enter Press the A or V button to select the Antenna source to memorize Press the ENTERL button to select Start Digital amp Analogue Digital and Analogue channels Digital Digital channels Analogue Analogue channels The channel search will start and end automatically Press the ENTERL button at any time to interrupt the memorization process After all the available channels are stored the message S
109. s not support the Hard of hearing function Normal automatically activates even though Hard of hearing mode is selected English is the default in cases where the selected language is unavailable in the broadcast You can select these options simply by pressing the SUBT button on the remote control AS es I Continued English 22 Teletext Language You can set the Teletext language by selecting the language type English is the default in cases where the selected language is unavailable in the broadcast Preference Primary Audio Language Secondary Audio Language Primary Subtitle Language Secondary Subtitle Language Primary Teletext Language Secondary Teletext Language Using this feature users can select one of the languages The language selected here is the default when the user selects a channel If you change the language setting the Subtitle Language Audio Language and the Teletext Language of the Language menu are automatically changed to the selected language The Subtitle Language Audio Language and the Teletext Language of the Language menu show a list of languages supported by the current channel and the selection is highlighted If you change this language setting the new selection is only valid for the current channel The changed setting does not change the setting of the Primary Subtitle Language Primary Audio Language or the Primary Teletext Language of the Preference menu Digital T
110. s or use of this software must display the following acknowledgement This product includes cryptographic software written by Eric Young eay cryptsoft com The word cryptographic can be left out if the rouines from the library being used are not cryptographic related 4 Ifyou include any Windows specific code or a derivative thereof from the apps directory application code you must include an acknowledgement This product includes software written by Tim Hudson tjh cryptsoft com THIS SOFTWARE IS PROVIDED BY ERIC YOUNG AS IS AND ANY EXPRESS OR IMPLIED WARRANTIES INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT INDIRECT INCIDENTAL SPECIAL EXEMPLARY OR CONSEQUENTIAL DAMAGES INCLUDING BUT NOT LIMITED TO PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES LOSS OF USE DATA OR PROFITS OR BUSINESS INTERRUPTION HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY WHETHER IN CONTRACT STRICT LIABILITY OR TORT INCLUDING NEGLIGENCE OR OTHERWISE ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE The licence and distribution terms for any publically available version or derivative of this code cannot be changed i e this code cannot simply be copied and put under another distribution licence including the GNU Public Licence English 56
111. s the corresponding coloured button You can change teletext pages by pressing the numeric buttons on the remote control Continued English 38 The teletext pages are organized according to six categories Part Contents Selected page number Broadcasting channel identity Current page number or search indications Date and time Text Status information FASTEXT information mO OvD AS Teletext information is often divided between several pages displayed in sequence which can be accessed by Entering the page number Selecting a title in a list Selecting a coloured heading FASTEXT system Press the TV button to exit from the teletext display Wall Mount Kit Specifications VESA Install your wall mount on a solid wall perpendicular to the floor When attaching to other building materials please contact your nearest dealer If installed on a ceiling or slanted wall it may fall and result in severe personal injury Product Family inch VESA Spec A B Standard Screw Quantity 19 22 100 100 20 720 200 100 30 40 200 200 LCD TV 46 55 400 400 57 70 800 400 60 1400 800 42 50 400 400 g8 63 600 400 PDP TV 70 800 400 80 1400 800 We provided the standard dimensions for wall mount kits as shown in the table above When purchasing our wall mount kit a detailed installation manual and all parts necessary for assembl
112. se Therefore by modifying or propagating a covered work you indicate your acceptance of this License to do so Automatic Licensing of Downstream Recipients Each time you convey a covered work the recipient automatically receives a license from the original licensors to run modify and propagate that work subject to this License You are not responsible for enforcing compliance by third parties with this License An entity transaction is a transaction transferring control of an organization or substantially all assets of one or subdividing an organization or merging organizations If propagation of a covered work results from an entity transaction each party to that transaction who receives a copy of the work also receives whatever licenses to the work the party s predecessor in interest had or could give under the previous paragraph plus a right to possession of the Corresponding Source of the work from the predecessor in interest if the predecessor has it or can get it with reasonable efforts You may not impose any further restrictions on the exercise of the rights granted or affirmed under this License For example you may not impose a license fee royalty or other charge for exercise of rights granted under this License and you may not initiate litigation including a cross claim or counterclaim in a lawsuit alleging that any patent claim is infringed by making using selling offering for sale or importing the Program or any portion
113. sed by the source or signal Please check the volume of device Cable Sat Box DVD Blu ray etc connected to your TV Then adjust the TV volume accordingly No sound or sound is too low at maximum volume Set the Speaker Select option to TV speaker in the sound menu Make sure audio cables from an external device are connected to correct audio input jacks on the TV Check connected device s audio output option Picture is good but no sound Ex You may need to change your cable box audio option to HDMI when you have HDMI connected to your TV e f you are using a DVI to HDMI cable a separate audio cable is required Remove plug from headphone jack if available on your TV Reboot the connected device by reconnecting the device s power cable Check cable connections Make sure a video cable is not connected to an audio input Noise from speaker ForAntenna Cable connection check signal strength Low signal level may cause sound distortion Continued English 42 Problem Possible Solution No Picture No Video TV won t turn on Make sure the AC power cord is plugged in securely to the wall outlet and the TV e Make sure the wall outlet is working Try pressing the Power button on the TV to make sure the remote is working properly If the TV turns on it may be caused by Remote Control To fix the Remote problem refer to Remote control does not work below Check if the Sleep Ti
114. ses represent the only significant mode of use of the product Installation Information for a User Product means any methods procedures authorization keys or other information required to install and execute modified versions of a covered work in that User Product from a modified version of its Corresponding Source The information must suffice to ensure that the continued functioning of the modified object code is in no case prevented or interfered with solely because modification has been made If you convey an object code work under this section in or with or specifically for use in a User Product and the conveying occurs as part of a transaction in which the right of possession and use of the User Product is transferred to the recipient in perpetuity or for a fixed term regardless of how the transaction is characterized the Corresponding Source conveyed under this section must be accompanied by the Installation Information But this requirement does not apply if neither you nor any third party retains the ability to install modified object code on the User Product for example the work has been installed in ROM The requirement to provide Installation Information does not include a requirement to continue to provide support service warranty or updates for a work that has been modified or installed by the recipient or for the User Product in which it has been modified or installed Access to a network may be denied when the modificati
115. t NATIO uehementer das n Fb ao Rd rte 25 E Supported PFODFGITI uico reno indo Fan daa pa siansa dsni 26 A Symbol Press Note One Touch Button TOOLS English 3 Connecting and Preparing Your TV Checking Parts Too Owner s Instructions Remote Control Power Cord Cloth Clean Holder Ring 4ea Holder Wire Cable AAA Batteries 2ea Refer to page 40 Screw 4ea Cover Bottom Cover Bottom Ferrite Core for PS50B550 only PS50B550 only Screws 2ea Power Cord Headphone PS58B550 only c a a a a a En a te a ee a a a E a a a a a a E E E E a te Ferrite Core Power Cord Headphone The ferrite core is used to shield the cable from interference When connecting a cable open the ferrite core and clip it around the cable near the plug as shown in the figure Using the Stand Base Two or more people should carry the PDP Never lay the PDP on the floor because of possible damage to the screen Always keep the PDP upright The PDP can rotate 20 degrees in right and left directions Assembling the Cables Enclose the cables in the Holder Wire Cable so that the cables are not visible through the transparent stand English 4 Viewing the Control Panel SAMSUNG eee Front Panel buttons The product colour and shape may vary depending on the model Touch each button to operate SOURCE Q ACHYV Toggles between all the av
116. tandard Interface for which an implementation is available to the public in source code form A Major Component in this context means a major essential component kernel window system and so on of the specific operating system if any on which the executable work runs or a compiler used to produce the work or an object code interpreter used to run it The Corresponding Source for a work in object code form means all the source code needed to generate install and for an executable work run the object code and to modify the work including scripts to control those activities However it does not include the work s System Libraries or general purpose tools or generally available free programs which are used unmodified in performing those activities but which are not part of the work For example Corresponding Source includes interface definition files associated with source files for the work and the source code for shared libraries and dynamically linked English 51 subprograms that the work is specifically designed to require such as by intimate data communication or control flow between those subprograms and other parts of the work The Corresponding Source need not include anything that users can regenerate automatically from other parts of the Corresponding Source The Corresponding Source for a work in source code form is that same work 2 Basic Permissions All rights granted under this License are granted for the term of
117. the work s users your or third parties legal rights to forbid circumvention of technological measures 4 Conveying Verbatim Copies You may convey verbatim copies of the Program s source code as you receive it in any medium provided that you conspicuously and appropriately publish on each copy an appropriate copyright notice keep intact all notices stating that this License and any nonpermissive terms added in accord with section 7 apply to the code keep intact all notices of the absence of any warranty and give all recipients a copy of this License along with the Program You may charge any price or no price for each copy that you convey and you may offer support or warranty protection for a fee 5 Conveying Modified Source Versions You may convey a work based on the Program or the modifications to produce it from the Program in the form of source code under the terms of section 4 provided that you also meet all of these conditions a The work must carry prominent notices stating that you modified it and giving a relevant date b The work must carry prominent notices stating that it is released under this License and any conditions added under section 7 This requirement modifies the requirement in section 4 to keep intact all notices c You must license the entire work as a whole under this License to anyone who comes into possession of a copy This License will therefore apply along with any applicable section 7 additiona
118. ult of the information broadcast on a given channel The display will dynamically update as soon as new information becomes available Full Guide Displays the programme information as time ordered One hour segments One hours of programme information is displayed which may be scrolled forwards or backwards in time Mini Guide The information of each programme is displayed by each line on the current channel Mini Guide screen from the current programme onwards according to the programme starting time order QO Default Guide Full Guide Mini Guide Full Guide You can decide whether to display either the Mini Guide ic pd or the Full Guide when the GUIDE button on the remote control is pressed a imb m You can also display the guide menu simply by pressing the GUIDE button Channel List A Channel Mode Added Ch Fine Tune Using the Full Mini Guide ja 2 00 L gt DTV Cable 900 f tn 2 10 Tue 1 Jun 2 30 Street Hypnosis 1 1 1 O 2 Freshmen On Campus Y 5 00 Booze Britain 2 2 00 2 30 Watch C Information Page W Full Guide Bl Exit No Detailed Information 2 00 3 00 Freshmen O Full Guide Mini Guide DTV Cable 900 f tn 901 902 Kerrang 903 Kiss 903 oneword v 903 Smash Hits Watch C Information Page Bi Mini Guide Wi 24 Hours Bi Exit Select a programme by pressing the A lt gt button A Y lt 4 gt Ifthe next progrmme is selected it is scheduled with the clock icon displayed If the
119. une the channel manually Fine tuned channels that have been saved are marked with an asterisk on the right hand side of the channel number in the channel banner If you do not store the fine tuned channel in memory adjustments are not saved To reset the fine tuning select Reset by pressing the W button and then press the ENTERLS button English 12 Managing Channels Using this menu you can Add Delete or set Favourite channels and use the programme Mini Guide guide for digital broadcasts Default Guide Full Guide Select a channel in the All Channels Added Channels Favourites or Programmed screen by pressing the A or V buttons and pressing the ENTERL button Then you can watch the selected channel EIER PUE NUE m E Fine Tune All Channels Shows all currently available channels Added Channels Shows all added channels Favourites Shows all favourite channels Programmed Shows all current reserved programmes 824 UKTV Gold Using the Colour buttons with the Channel List 825 UKTV style Red Channel Type Toggle between your TV Radio Data Other and All Green Zoom Enlarges or shrinks a channel number Yellow Select Selects multiple channel lists 4 TOOLS Tools Displays the Delete or Add Add to Favourite or Delete from Favourite Lock or Unlock Timer Viewing Edit Channel Name Edit Channel Number Sort Select All or Deselect All or A
120. ut for the patent license your conveying the covered work in a country or your recipient s use of the covered work in a country would infringe one or more identifiable patents in that country that you have reason to believe are valid If pursuant to or in connection with a single transaction or arrangement you convey or propagate by procuring conveyance of a covered work and grant a patent license to some of the parties receiving the covered work authorizing them to use propagate modify or convey a specific copy of the covered work then the patent license you grant is automatically extended to all recipients of the covered work and works based on it A patent license is discriminatory if it does not include within the scope of its coverage prohibits the exercise of or is conditioned on the non exercise of one or more of the rights that are specifically granted under this License You may not convey a covered work if you are a party to an arrangement with a third party that is in the business of distributing software under which you make payment to the third party based on the extent of your activity of conveying the work and under which the third party grants to any of the parties who would receive the covered work from you a discriminatory patent license a in connection with copies of the covered work conveyed by you or copies made from those copies or b primarily for and in connection with specific products or compilations that c
121. uto Store menu The Options menus may differ depending on the situation Sjeuueut Peppy Channel Type Zoom W Select 4 Tools Channel Status Display Icons E An Analogue channel A channel selected by pressing the yellow button wv Achannel set as a Favourite EA A programme currently being broadcast Alocked channel A reserved programme Q Channel List Tools Menu in All Channels Added Channels Favourites Press the TOOLS button to use the tools menu Option menu items may differ depending on the channel status M iu 825 UKTV style Add Delete 5 mi C oy You can delete or add a channel to display the channels you want 2 m2 eb etate Lock O a3 All deleted channels will be shown on All Channels menu y E A gray coloured channel indicates the channel has been deleted HE Ed HAPPENS The Add menu only appears for deleted channels m6 Sort You can also delete a channel to the Added Channels or Favourite menu in the same manner Channel Type Zoom W Select amp Tools Add to Favourite Delete from Favourite You can set channels you watch frequently as favourites x Press the TOOLS button to display Tools menu You can also add the favourite channel by selecting Tools Add to Favourite or Delete from Favourite The v symbol will be displayed and the channel will be set as a favourite All favourite channels will be shown on Favourite menu To select the Favourite channels
122. vered work you may at your option remove any additional permissions from that copy or from any part of it Additional permissions may be written to require their own removal in certain cases when you modify the work You may place additional permissions on material added by you to a covered work for which you have or can give appropriate copyright permission Notwithstanding any other provision of this License for material you add to a covered work you may if authorized by the copyright holders of that material supplement the terms of this License with terms a Disclaiming warranty or limiting liability differently from the terms of sections 15 and 16 of this License or b Requiring preservation of specified reasonable legal notices or author attributions in that material or in the Appropriate Legal Notices displayed by works containing it or c Prohibiting misrepresentation of the origin of that material or requiring that modified versions of such material be marked in reasonable ways as different from the original version or d Limiting the use for publicity purposes of names of licensors or authors of the material or e Declining to grant rights under trademark law for use of some trade names trademarks or service marks or f Requiring indemnification of licensors and authors of that material by anyone who conveys the material or modified versions of it with contractual assumptions of liability to the recipient for any liability
123. vided by another manufacturer it may result in a problem with the product or an injury due to the product falling f you use parts provided by another manufacturer it may result in a problem with the product or fire due to an increase in the internal temperature of the product due to poor ventilation The appearance may differ depending on the product When installing the product with a stand When installing the product with a wall mount English 41 Troubleshooting If the TV seems to have a problem first try this list of possible problems and solutions Problem Possible Solution Picture Quality First of all please perform the Picture Test to confirm that your TV is properly displaying test image Go to MENU Support Self Diagnosis Picture Test If the test image is properly displayed the poor picture may caused by the source or signal e f you have an analog Cable Set top box upgrade to an Box Use HDMI or Component cables to deliver HD picture quality TV image does not look as good as it Cable Satellite subscriber Try HD High Definition stations from channel line up did in the store e Antenna connection Try HD stations after performing Auto program Many HD channels are upscaled from SD Standard Definition contents Adjust Cable Set top video output resolution to 1080i or 720p Compression of video contents may cause picture distortion especially on fast moving
124. video and audio settings you have made will return to their default factory settings We recommend you write down your settings so that you can easily reset them after the upgrade TV Side Panel E f USB Drive AV By Channel Upgrades the software using the broadcasting signal Standby Mode Upgrade To continue software upgrade with master power on select on by pressing the A or V button 45 minutes after entering standby mode a manual upgrade is automatically conducted Since the power of the unit is turned on internally the screen may be on slightly for the product This phenomenon may continue for more than 1 hour until the software upgrade is completed Alternative Software Replace the current software with the alternative o HD Connection Guide The brief instruction on How to get the best performance from your HD TV is displayed We offer the connection method for HD devices You can change previous or next page by pressing the lt or gt button 4 Contact Samsung You can know the Samsung Call center website and information for product English 26 Media Play Connecting a USB Device CS AS Press the POWER button to turn the TV on TV Side Panel Connect a USB device containing photo music and movie files to the USB jack on the side of the TV l USB Drive If you enter the Media Play mode with no USB device connected the message No external T storage device found Check the conn
125. ving a relevant date b The work must carry prominent notices stating that it is released under this License and any conditions added under section 7 This requirement modifies the requirement in section 4 to keep intact all notices c You must license the entire work as a whole under this License to anyone who comes into possession of a copy This License will therefore apply along with any applicable section 7 additional terms to the whole of the work and all its parts regardless of how they are packaged This License gives no permission to license the work in any other way but it does not invalidate such permission if you have separately received it d If the work has interactive user interfaces each must display Appropriate Legal Notices however if the Program has interactive interfaces that do not display Appropriate Legal Notices your work need not make them do so A compilation of a covered work with other separate and independent works which are not by their nature extensions of the covered work and which are not combined with it such as to form a larger program in or on a volume of a storage or distribution medium is called an aggregate if the compilation and its resulting copyright are not used to limit the access or legal rights of the compilation s users beyond what the individual works permit Inclusion of a covered work in an aggregate does not cause this License to apply to the other parts of the aggregate 6
126. y are provided Do not use screws longer than the standard dimension as they may cause damage to the inside of the TV set For wall mounts that do not comply with the VESA standard screw specifications the length of the screws may differ depending on their specifications Do not use screws that do not comply with the VESA standard screw specifications Do not use fasten the screws too strongly this may damage the product or cause the product to fall leading to personal injury Samsung is not liable for these kinds of accidents Samsung is not liable for product damage or personal injury when a non VESA or non specified wall mount is used or the consumer fails to follow the product installation instructions Our 57 and 63 models do not comply with VESA Specifications Therefore you should use our dedicated wall mount kit for this model Do not exceed 15 degrees tilt when mounting this TV M4 M6 4 M8 M8 4 AS S amp AS AN Do not install your Wall Mount Kit while your TV is turned on It may result in personal injury due to electric shock English 39 Preparing before installing Wall Mount on the wall Case B Installing other company s Wall Mount PC i cc ce ce cc ce 1 Install Wall Mount with the torque range of 15kgf cm or less Make sure that parts can be damaged if the torque is out of the
127. y not convey a covered Work if you are a party to an arrangement with a third party that is in the business of distributing software under which you make payment to the third party based on the extent of your activity of conveying the work and under which the third party grants to any of the parties who would receive the covered work from you a discriminatory patent license a in connection with copies of the covered work conveyed by you or copies made from those copies or b primarily for and in connection with specific products or compilations that contain the covered work unless you entered into that arrangement or that patent license was granted prior to 28 March 2007 Nothing in this License shall be construed as excluding or limiting any implied license or other defenses to infringement that may otherwise be available to you under applicable patent law No Surrender of Others Freedom If conditions are imposed on you whether by court order agreement or otherwise that contradict the conditions of this License they do not excuse you from the conditions of this License If you cannot convey a covered work so as to satisfy simultaneously your obligations under this License and any other pertinent obligations then as a consequence you may not convey it at all For example if you agree to terms that obligate you to collect a royalty for further conveying from those to whom you convey the Program the only way you could satisfy both those t
128. yright like laws that apply to other kinds of works such as semiconductor masks The Program refers to any copyrightable work licensed under this License Each licensee is addressed as you recipients may be individuals or organizations To modify a work means to copy from or adapt all or part of the work in a fashion requiring copyright permission other than the making of an exact copy The resulting work is called a modified version of the earlier work or a work based on the earlier work A covered work means either the unmodified Program or a work based on the Program To propagate a work means to do anything with it that without permission would make you directly or secondarily liable for infringement under applicable copyright law except executing it on a computer or modifying a private copy Propagation includes copying distribution with or without modification making available to the public and in some countries other activities as well To convey a work means any kind of propagation that enables other parties to make or receive copies Mere interaction with a user through a computer network with no transfer of a copy is not conveying An interactive user interface displays Appropriate Legal Notices to the extent that it includes a convenient and prominently visible feature that 1 displays an appropriate copyright notice and 2 tells the user that there is no warranty for the work except to

Samsung Series 5 50inch (PS50B550) User Manual

Contents

Download Pdf Manuals

Related Search

Related Contents