Home

Samsung LA22C450E1 User Manual

1. amp AUDIO OUT Connects to the audio input jacks on your amplifier DVD home theatre e When connecting use the appropriate connector e When an audio amplifier is connected to the AUDIO OUT jacks Decrease the volume of the TV and adjust the volume level with the Amplifier s volume control amp Headphones K You can connect your headphones to the headphones output on your set While the headphones are connected the sound from the built in speakers will be disabled Sound function may be restricted when connecting headphones to the TV e Headphone volume and TV volume are adjusted separately Input Cables Sold Separately HDMI HDMI DVI Component Composite AV Coaxial RF VGA 1O Engish Changing the Input Source Source List Use to select TV or other external input sources such as DVD Blu ray players Cable Box Satellite receivers Set Top Box connected to the TV SOURCE E 22 TV AV1 AV2 Component PC HDMI DVI USB E 26 32 TV AV1 AV2 Componentt Component2 PC HDMI1 DVI HDMI2 HDMI3 USB Basic Features Before using the TV follow the steps below to learn how to navigate the menu and select and adjust different functions menar em m ZN A ENTER C Direction button Move the cursor and select an item Confirm the setting RETURN button Returns to the previous menu MENU button Displays the main on screen menu E
2. index Display the index contents page at any time while you are viewing Teletext reveal Display the hidden text answers to quiz games for screen For the lower half of the example To display the normal screen press it again To display screen press it again the normal screen press it once again E hold Hold the display on a given page if the selected page is linked with several secondary pages which follow on automatically To resume press it again mode Select the Teletext mode LIST FLOF If you press this button in the LIST mode the mode is switched into the List save mode In the List save mode you can save a Teletext page into list using the store button sub page Display the available sub page cy R p a FE Pse Safest Le it i SAMSUNG The Teletext pages are organized according to six categories cancel Display the current broadcast when searching for a page Colour buttons red green yellow blue If the FASTEXT system is used by a broadcasting company the different topics covered on a Teletext page are colour coded and can be selected by pressing the coloured buttons Press one of them corresponding to the required The page is displayed with other coloured information that can be selected in the same way To display the previous or next page press the corresponding coloured button Part Contents Pa
3. English 3 Getting Started Accessories Please make sure the following items are included with your LCD TV If any items are missing contact your dealer amp The items colours and shapes may vary depending on the models e Remote Control amp Batteries AAA x 2 e Cleaning Cloth e Owner s Instructions e Power Cord 9 M4 X L16 a FM Transmitter Wall Mount lat e Warranty Card Safety Guide Not available in some locations LA26C450 LA32C450 Screws 3EA W See separate guide for installation Not available in some locations a Viewing the Control Panel The product colour and shape may vary depending on the model Remote control sensor Power Indicator SOURCE 5 MENU o o VOL V CHA e SAMSUNG Speakers Power Turns the TV on or off Power Indicator Blinks and turns off when the power is on and lights up in standby mode SOURCE C Toggles between all the available input sources In the on screen menu use this button as you would use the ENTER C button on the remote control MENU Displays an on screen menu the OSD on screen display of your TV s features VOL Adjusts the volume In the OSD use the VOL buttons as you would use the lt and gt buttons on the remote control VCHA Changes the channels In the OSD use the WY CH A buttons as you would use the V and A buttons on the remote control Remote control
4. amp Play Initial setup to add available channels to the channel list Go to MENU Setup Plug amp Play Initial setup and wait for all available channels to be stored P 6 Verify the Antenna is positioned correctly The picture is distorted macroblock error small block dots pixelization Compression of video contents may cause picture distortion especially with fast moving pictures such as sports and action movies A low signal can cause picture distortion This is not a TV issue PC Connection A Not Supported Mode message appears Set your PC s output resolution and frequency so they match the resolutions supported by the TV P 21 PC is always shown on the source list even if a PC is not connected This is normal PC is always shown on the source list regardless of whether a PC is connected The video is OK but there is no audio Others If you are using a HDMI connection check the audio output setting on your PC The picture won t display in full screen HD channels will have black bars on either side of the screen when displaying upscaled SD 4 3 contents Black bars on the top and bottom will appear during movies that have aspect ratios different from your TV Adjust the picture size options on your external device or TV to full screen The remote control does not work Replace the remote control batteries with the poles in the right direction Cl
5. License 1 DOLBY DIGITAL PLUS PULSE Manufactured under license from Dolby Laboratories Dolby and the double D symbol are trademarks of Dolby Laboratories 2 0 Digital Out Manufactured under license under U S Patent s 5 451 942 5 956 674 5 974 380 5 978 762 6 487 535 amp other U S and worldwide patents issued amp pending DTS and the Symbol are registered trademarks amp DTS 2 0 Digital Out and the DTS logos are trademarks of DTS Inc Product Includes software DTS Inc All Rights Reserved DivX Certified to play DivX video up to HD 1080p including premium content 7 460 688 7 519 274 ABOUT DIVX VIDEO DivX is a digital video format created by DivX Inc This is an official DivX Certified device that plays DivX video Visit www divx com for more information and software tools to convert your files into DivX video ABOUT DIVX VIDEO ON DEMAND This DivX Certified device must be registered in order to play DivX Video on Demand VOD content To generate the registration code locate the DivX VOD section in the device setup menu Go to vod divx com with this code to complete the registration process and learn more about DivX VOD Pat 7 295 673 Open source license notice 38 English n the case of using open source software Open Source Licenses are available on the product menu Specifications Panel native 1360 x 768 60 Hz Environmental Considerations Opera
6. Stereo change Stereo Dual Monog Dyan Dual Dual II amp If the stereo signal is weak and an automatic switching occurs then switch to the mono Qy Only activated in stereo sound signal amp Only available when the Input source is set to TV D Setting the Time Time H Clock Setting the clock is for using various timer features of the TV The current time will appear every time you press the INFO button if you disconnect the power cord you have to set the clock again amp You can set the Day Month Year Hour and Minute directly by pressing the number buttons on the remote control Using the Sleep Timer E Sleep Timer Automatically SLEEP shuts off the TV after a preset period of time 30 60 90 120 150 and 180 minutes amp To cancel Sleep Timer select Off a Setting the On Off Time E Timer 1 Timer 2 Timer 3 Three different on off timer settings can be made You must set the clock first On Time 12 00 am Off Time 12 00 am Source Channel Tue Wed Thu Fri Sat Volume ROE Sun Mon 4 gt Move Adjust 4 Enter 5 Return On Time Off Time Set the hour minute and activate inactivate To activate timer with the setting you ve chosen set to Activate Volume Set the desired volume level Source Select TV or USB content to be played when the TV is turned on automatically USB can be selected only when a USB device i
7. USB device while it is loading The higher the resolution of the image the longer it takes to display on the screen The maximum supported JPEG resolution is 15360X8640 pixels e For unsupported or corrupted files the Not Supported File Format message is displayed Ifthe files are sorted by Basic View up to 1000 files can be displayed in each folder e MP3 files with DRM that have been downloaded from a non free site cannot be played Digital Rights Management DRM is a technology that supports the creation distribution and management of the content in an integrated and comprehensive way including the protection of the rights and interests of the content providers the prevention of the illegal copying of contents as well as managing billings and settlements e If more than 2 PTP devices are connected you can only use one at a time e If more than two MSC devices are connected some of them may not be recognized A USB device that requires high power more than 500mA or 5V may not be supported e If an over power warning message is displayed while you are connecting or using a USB device the device may not be recognized or may malfunction e Ifthe TV has been no input during time set in Auto Protection Time the Screensaver will run e Ifa USB extension cable is used the USB device may not be recognized or the files on the device may not be read Ifa USB device connected to the TV is not recognized the list of files o
8. directly V 5 Repeat Mode You can play movie and music files repeatedly J 7 8 mn Picture Size You can adjust the picture size to your preference V g Mode1 Mode2 Original Picture Setting You can adjust the picture setting p 13 14 15 Jf J g Sound Setting You can adjust the sound setting p 16 17 JV JV Subtitle Setting You can play the video with Subtitles This function only works if the subtitles are the 7 same file name as the video Stop Slide Show You can start or stop a Slide Show Start Slide Show Slide Show Speed You can select the slide show speed during the slide show JV Background Music You can set and select background music when watching a Slide Show J Zoom You can zoom into images in full screen mode J Rotate You can rotate images in full screen mode JV Information You can see detailed information about the played file J Jv Settings Using the Setup Menu H Cont movie play help Resume Play On Off Select to display the help pop up message for continuous movie playback E Get DivX VOD registration code Shows the registration code authorized for the TV If you connect to the DivX web site and register you can download the VOD registration file If you play the VOD registration using Media Play the registration is completed amp For more information on DivX VOD visit www DivX com E Get DivX VOD deactivation code When DivX VOD is not registered the registration deactivation
9. it s default settings Flesh Tone Emphasize pink Flesh Tone Edge Enhancement Off On Emphasize object boundaries Q Available when the picture mode is set to Standard and Movie and when the external input is set to HDMI or Component Q Some external devices may not support this function 14 Engish Picture Options amp n PC mode you can only make changes to the Colour Tone Size and Auto Protection Time Picture Options Colour Tone Normal gt Size Digital Noise Filter MPEG Nosie Filter HDMI Black Level Film Mode 16 9 Auto Auto Normal Off Auto Protection Time 2 hours v Move Enter Return Colour Tone Cool Normal Warm1 Warm2 amp Warmi or Warm2 will be deactivated when the picture mode is Dynamic SN Settings can be adjusted and stored for each external device connected to an input on the TV Size Your cable box satellite receiver may have its own set of screen sizes as P SIZE well However we highly recommend 5 you use 16 9 mode most of the time B 16 9 Adjusts the picture size to 16 9 for DVDs or wide broadcasting Wide Zoom Magnifies the picture size more than 4 3 amp Adjusts the Position by using A V buttons Zoom Magnifies the 16 9 wide pictures vertically to fit the screen size amp Adjusts the Position or Size by using A button 4 3 The defa ult setting for a movie or normal broadc
10. sensor Aim the remote control towards this spot on the TV Standby mode Do not leave your TV in standby mode for long periods of time when you are away on a holiday for example A small amount of electric power is still consumed even when the power button is turned off It is best to unplug the power code 4 Engish Viewing the Remote Control Q Q 0 C 5 POWER SOURCE amp Turns the TV on and off P 6 l Displays and selects the available video sources Q Sj oa oO a Have direct access to channels P10 Returns to the previous channel Alternately selects Teletext Double c nae PRE CH E P11 Ei Views the Media play P 22 gt SHeDia MENU Hom m Mt o ZO O or MIX MUTE SO Pop Cut off the sound temporarily o Adjusts the volume CHUST P Changes channels si J Displays the main on screen menu l x Displays channel list on the screen P 13 Selects the HDMI mode directly Quickly selects frequently used functions Displays information on the TV screen P 17 Selects on screen menu items and changes menu values Returns to the previous menu P 11 Exit the menu P 11 Buttons in the Channel Manager Media Play menu etc S MODE Selects the sound mode P 15 SLEEP Setting the Sleep Timer P 17 DUAL l Il Selects the dual sound mode P 16 P MO
11. the MUTE button Troubleshooting If the TV seems to have a problem refer to this description If none of these trouble shooting tips apply contact the Samsung customer service centre Software Upgrade Software Upgrade can be performed by downloading the latest firmware from samsung com to a USB memory device Current Version the software already installed in the TV amp Software is represented as Year Month Day_Version Software Upgrade Current Version 2010 01 18_000001 By USB gt Alternative Software Move C Enter 5 Return Installing the Latest Version E By USB Insert a USB drive containing the firmware upgrade file downloaded from www samsung com into the TV Please be careful not to disconnect the power or remove the USB drive until upgrades are complete The TV will be turned off and on automatically after completing the firmware upgrade When software is upgraded video and audio settings you have made will return to their default settings We advise you to to write down your settings so that you can easily reset them after the upgrade sainjee4 oiseg 0 TV Rear Panel p TV Side Panel or USB Drive USB Drive depending on the model E Alternative Software Not available HD Connection Guide Refer to this information when connecting external devices to the TV Contact Samsung View this informa
12. time defined by the user Disabled when the PC is in power saving mode Engish 13 saunyeej oiseg 0 Basic Features al Changing the Picture Options Advanced Settings avai able in Standard Movie mode You can adjust the detailed setting for the screen including colour and contrast amp n PC mode you can only make changes to Dynamic Contrast Gamma and White Balance Advanced Settings Black Tone Off gt Dynamic Contrast Medium Shadow Detail 0 Gamma 10 RGB Only Mode Off Colour Space Native White Balance Ww Move Enter 5 Return Black Tone Off Dark Darker Darkest Select the black level to adjust the screen depth Dynamic Contrast Off Low Medium High Adjust the screen contrast Shadow Detail 2 2 Increase the brightness of dark images amp Disabled under PC mode Gamma Adjust the primary colour intensity RGB Only Mode Off Red Green Blue You can adjust Colour or Tint of Red Green or Blue for the picture from an external device DVD player home theatre etc Colour Space Auto Native Adjust the range of colours available to create the image White Balance Adjust the colour temperature for a more natural picture R Offset G Offset B Offset Adjust each colour s red green blue darkness R Gain G Gain B Gain Adjust each colour s red green blue brightness Reset Resets the White Balance to
13. www samsung com NEW ZEALAND 0800 SAMSUNG 0800 726 786 www samsung com 1 800 10 SAMSUNG 726 7864 PHILIPPINES EEE ioe teen www samsung com 02 5805777 QATAR CE SINGAPORE 1800 SAMSUNG 726 7864 www samsung com SOUTH AFRICA 0860 SAMSUNG 726 7864 www samsung com SYRIA 1825 22 73 TAIWAN 0800 329 999 www samsung com THAILAND a www samsung com U A E 800 SAMSUNG 726 7864 www samsung com VIETNAM 1 800 588 889 www samsung com BN68 02684A 00 2010 Samsung Electronics Co Ltd All rights reserved
14. D volume is displayed press and hold MENU for 5 sec Selecting an area Press the A or Y button then press the ENTER C button Select the appropriate area Selecting a channel The channel search will start automatically For more information refer to Channel Auto Store amp Press the ENTER C button at any time to interrupt the memorization process Setting the Clock Press the lt or gt button to select Day Month Year Hour or Minute Set these by pressing the A or Y button Viewing the HD The connection method for the best HD screen quality is displayed Connection Guide Enjoy your TV Press the ENTER C button NOOO AO If You Want to Reset This Feature Select Setup Plug amp Play Initial Setup Enter your 4 digit PIN number The default PIN number is 0 0 0 0 If you want to change the PIN number use the Change PIN function 6 English Connections Connecting to an AV Device LA26C450 LA32C450 Using an HDMI DVI Cable HD connection up to 1080p Available devices DVD Blu ray player HD cable box HD satellite receiver STB cable box satellite receiver STB annnnnnnnnny AUDIO OUT R AUDIO L PC DVI K i AUDIO IN fF DVI OUT amp HDMI IN 1 DVI 2 3 PC DVI AUDIO IN e When using an HDMI DVI cable connection you must use the HDMI IN 1 DVI jack For the DVI cable c
15. DE Selects the picture mode P 13 P SIZE Choose the picture size P 14 E SAVING Selects the energy saving mode P 13 Use these buttons in the Media Play and Anynet modes controls recording on Samsung recorders with the Anynet feature SAMSUNG Installing batteries Battery size AAA NOTE e Use the remote control within 23 feet from the TV Bright light may affect the performance of the remote control Avoid using nearby special fluorescent light or neon signs The colour and shape may vary depending on the model Engish 5 Getting Started When the TV is initially powered on basic settings proceed automatically Q Preset Connecting the mains and antenna VHF UHF Antenna Power Input Plug amp Play Initial Setup When the TV is initially powered on a sequence of on screen prompts will assist in configuring basic settings Press the POWER button Plug amp Play is available only when the Input source is set to TV 1 Selecting a language Press the A or Y button then press the ENTER C button Select the desired OSD On Screen Display language 2 Selecting Store Demo Press the lt or gt button then press the ENTER C4 button or Home Use e Select the Home Use mode Store Demo Mode is for retail environments e Return the unit s settings from Store Demo to Home Use standard Press the volume button on the TV When the OS
16. HDMI Home Theatre Installation Space L License Language Lock M Media Play Melody Music Menu Transparency N Navigate O Optimal resolution P Photos PIP Picture in Picture Power Indicator Plug amp Play Picture Size 12 13 14 15 21 5 7 9 8 28 37 18 12 22 18 25 18 1 21 25 18 14 27 R Remote Control RGB Only Mode Receiver Recording Rotate Repeat Mode S Sleep Timer Slide Show Software Upgrade Source List Speaker Select Standby mode Select All Self Diagnosis Sharpness Specifications Symbol T Teletext Timer Title Tools Troubleshooting TV Speaker U USB Drive V Videos Volume Virtual Surround VCR Video Formats W Wall Mount Warm White Balance 19 14 30 29 27 27 1T 25 19 10 16 12 19 13 38 32 17 26 35 16 22 23 16 24 33 14 14 Contact SAMSUNG WORLDWIDE If you have any questions or comments relating to Samsung products please contact the SAMSUNG customer care centre Country Customer Care Centre amp Web Site AUSTRALIA 1300 362 603 www samsung com BAHRAIN 8000 4726 CHINA Aas www samsung com HONG KONG 852 3698 4698 ee ae ari 3030 8282 INDIA be eee www samsung com 1800 266 8282 INDONESIA peel www samsung com JAPAN 0120 327 527 www samsung com JORDAN 800 22273 KSA 9200 21230 www samsung com MALAYSIA 1800 88 9999
17. N 1 When connecting to AV IN 1 the colour of the AV IN 1 Y VIDEO jack Green does not match the colour of the video cable Yellow To obtain the best picture quality the Component connection is recommended over the A V connection English 9 Connections Connecting to an Audio Device LA22C450 Using an Optical Cable Digital Audio Cable Analogue Connection Available devices digital audio system amplifier DVD home theatre 1B V B Home Theatre Headphones i DIGITAL Red White AUDIO OUT OPTICAL D A ae ile amp DIGITAL AUDIO OUT OPTICAL e When a digital audio system is connected to the DIGITAL AUDIO OUT OPTICAL jack decrease the volume of both the TV and the system e 5 1CH channel audio is available when the TV is connected to an external device supporting 5 1CH e When the receiver home theatre is set to on you can hear sound output from the TV s optical jack When the TV is receiving a DTV signal the TV will send 5 1 CH sound to the home theatre receiver When the source is a digital component such as a DVD Blu ray player cable box satellite receiver Set Top Box and is connected to the TV via HDMI only 2 CH audio will be heard from the home theatre receiver If you want to hear 5 1 CH audio connect the digital audio out jack from your DVD Blu ray player Cable Box Satellite receiver Set Top Box directly to an amplifier or home theatre
18. SERIES imagine the possibilities Thank you for purchasing this Samsung product To receive more complete service please register your product at www samsung com register Model SerialNo o Figures and illustrations in this User Manual are provided for reference only and may differ from actual product appearance Product design and specifications may be changed without notice Still image warning Avoid displaying still images like jpeg picture files or still image element like TV programme logo panorama or 4 3 image format stock or news bar at screen bottom etc on the screen Constant displaying of still picture can cause uneven wear of screen phosphor which will affect image quality To reduce risk of this effect please follow below recommendations e Avoid displaying the same TV channel for long periods e Always try to display any image on full screen use TV set picture format menu for best possible match e Reduce brightness and contrast values to minimum required to achieve desired picture quality exceeded values may speed up the burnout process e Frequently use all TV features designed to reduce image retention and screen burnout refer to proper user manual section for details Securing the Installation Space Keep the required distances between the product and other objects e g walls to ensure proper ventilation Failing to do so may result in fire or a problem with the product due
19. XIT button Exits the on screen menu ooo How to Operate the OSD On Screen Display The access step may differ depending on the selected menu 1 The main menu options appears on the screen MENU r Picture Sound Channel Setup Input Application Support Select an icon with the A or Y 2 AN button 3 ENTERC Press ENTERLC to access the sub menu 4 AY Select the desired submenu with the A or Y button 5 Adjust the value of an item with the ie lt or gt button The adjustment in the OSD may differ depending on the selected menu 6 ENTERC Press ENTER C to complete the configuration 7 EXIT 9 Press EXIT amp Inthe Source List connected inputs will be highlighted Edit Name E VCR DVD Cable STB Satellite STB PVR STB AV Receiver Game Camcorder PC DVI PC DVI Devices TV IPTV Blu ray HD DVD DMA Name the device connected to the input jacks to make your input source selection easier When connecting an HDMI DVI cable to the HDMI IN 1 DVI or HDMI DVI IN port you should set to DVI PC or DVI Devices mode under Edit Name saunjeej oiseg 0 Channel Menu Channel Manager Delete or set favourites channels Select a channel in the Channels My Channels or Scheduled screen sjeuuey OH Timer Viewing 10 CERION 13 E Zoom W Select Page 4 Tools E Or Channels Shows the channel list according to channel type m My Channels Shows t
20. amp Verify all connections are properly secured Periodically check connections for any sign of fatigue for failure If you have any doubt about the security of your connections contact a Pa professional installer amp Install the TV near to the wall so that it does not fall backwards Itis safe to connect the string so that the clamps fixed on the wall are equal to or lower than the clamps fixed on the TV amp Untie the string before moving the TV Engish 35 Other Information If you have any questions about the TV first refer to this list If none of these troubleshooting tips apply please visit www samsung com then click on Support or contact the call centre listed on the back cover of this manual Issues Solutions and Explanations Picture Quality First of all please perform the Picture Test and confirm that your TV is properly displaying test image go to MENU Support Self Diagnosis Picture Test P 19 If the test image is properly displayed the poor picture may caused by the source or signal The TV image does not look as good as it did in the store e If you have an analogue cable set top box upgrade to a digital set top box Use HDMI or Component cables to deliver HD high definition picture quality e Cable Satellite subscribers Try HD stations from the channel line up e Antenna connection Try HD stations after performing Auto programme amp Many HD chann
21. asting Do not watch in 4 3 format for a long time Traces of borders displayed on the left right and centre of the screen may cause image retention screen burn which are not covered by the warranty Screen Fit Displays the full image without any cut off when HDMI 720p 1080i 1080p or Component 1080i 1080p signals are inputted NOTE e After selecting Screen Fit in HDMI 1080i 1080p or Component 1080i 1080p mode Adjusts the Position or Size by using A V lt gt button Depending on the input source the picture size options may vary The available items may differ depending on the selected mode In PC mode only 16 9 and 4 3 modes can be adjusted Settings can be adjusted and stored for each external device connected to an input of the TV If you use the Screen Fit function with HDMI 720p input 1 line will be cut at the top bottom left and right as in the overscan function E Digital Noise Filter Off Low Medium High Auto Auto Visualisation Demo When the broadcast signal is weak some static and ghosting may appear Select one of the options until the best picture is displayed Auto Visualisation When changing analogue channels displays signal strength Qy Only available for analogue channels amp When bar is green you are receiving the best possible signal E MPEG Noise Filter Off Low Medium High Auto Reduces MPEG noise to provide an improved
22. code is displayed If you execute this function when DivX VOD is registered the current DivX VOD registration is deactivated E Information Select to view information about the connected device Engish 27 Advanced Features What is Anynet Anynet is a function that enables you to control all connected Samsung devices that support Anynet with your Samsung TV s remote The Anynet system can be used only with Samsung devices that have the Anynet feature To be sure your Samsung device has this feature check if there is an Anynet logo on it To connect to Home Theatre LA22C450 Tv proseeeessaeensesnscesecenausnsensesenaeseseeneseeotey Home Theatre Anynet Device 1 DIGITAL AUDIO IN HDMI OUT HDMI IN H amp Tee HDMI Cable HDMI Cable LA260450 LA320450 TV Perper ttt eee Home Theatre Anynet Device 1 Anynet Device 2 L Feet e es DIGITAL AUDIO IN HDMIOUT HDMI IN HDMI OUT HDMI OUT HDMI Cable Optical Cable HDMI Cable HDMI Cable 1 Connect the HDMI DVI IN LA22C450 or HDMI IN 1 DVI 2 3 A26C450 LA32C450 jack on the TV and the HDMI OUT jack of the corresponding Anynet device using an HDMI cable 2 Connect the HDMI IN jack of th
23. d insert the end into an FM Attach the FM transmitter and let the antenna drop transmitter mounting hole UOHEUOJU 194 O 90 Method 3 Unwind and position an antenna where the receiver gets best reception Engish SL Other Information NOTE Installing the antenna directly on the back of the TV may result in poor signal strength Allow some room between the TV and the antenna e Having the FM transmitter antenna in direct contact with the TV antenna can result in signal interference e Ifthe FM Transmitter menu is not active check to see if the transmitter has been properly connected in the direction of the holes e If listening to TV audio through an FM receiver e g a radio or a home theater using an FM frequency position the FM receiver s antenna for maximum signal strength e If listening to TV audio through an FM receiver e g a radio or a home theater using an FM frequency you will be able to enjoy the audio within a 10m radius open site regardless of direction or location e Only use the FM transmitter supplied as an accessory Otherwise you may damage the product Do not use the FM transmitter supplied as an accessory with other products e Match the TV s FM transmitter frequency with the FM receiver s e g a radio or a home theater frequency e Ifthe FM receiver s e g a radio or a home theater frequency does not match you will not be able to hear the audio e Adjust the FM receiv
24. de l Retuning channels Area You can change the desired area Auto Store Scans for a channel automatically and stores in the TV amp Automatically allocated programme numbers may not correspond to actual or desired programme numbers If a channel is locked using the Child Lock function the PIN input window appears Manual Store Scans for a channel manually and stores in the TV amp If a channel is locked using the Child Lock function the PIN input window appears E Programme 0 99 Colour System Sound System Channel Search If there is abnormal sound or no sound reselect the sound standard required 12 Engish amp Channel mode P programme mode When tuning is complete the broadcasting stations in your area have been assigned to position numbers from PO to P99 You can select a channel by entering the position number in this mode e C aerial channel mode S cable channel mode These two modes allow you to select a channel by entering the assigned number for each aerial broadcasting station or cable channel i Editing channels Channel Manager Option Menu in Channel Manager 1 Select a channel and press the TOOLS button 2 Edit the channel name using the Edit Channel Name menu respectively E Edit Channel Name Assign your own channel name D Other Features Channel Manager Option Menu in Channel Manager Set each channel using the Channel Manager menu options Lock Un
25. e digital sound reducing interference going to speakers and various digital devices such as a DVD player H Audio Format During the reception of a digital TV broadcast you can select the Digital Audio output SPDIF format from the options PCM or Dolby Digital S By connecting to 5 1ch speakers in a dolby digital setup maximize your interactive 3D sound experience H Audio Delay Correct audio video mismatch when watching TV or video and listening to digital audio output using an external device such as an AV receiver Oms 250ms FM Transmitter LA26C450 LA32C450 only amp Not available in some locations You can listen to TV sound from FM receiver speaker by transmitting audio signals by FM frequencies amp For more detailed information refer to FM Transmitter Setup P 31 Connecting a FM Transmitter TV Side Panel Insert FM Transmitter Module into the Socket which is located at the back side of TV E FM Transmitter Off On Turns F E FM Frequency Sets FM transmitter frequency transmitter on off Sound Reset OK Cancel Reset all sound settings to the factory defaults i Selecting the Sound Mode Ca When you set to Dual I Il the current sound mode is displayed on the screen Audio Type Dual I II Default A2 Mono Mono Automatic Stereo Stereo Stereo gt Mono change Dual Dual Dual II Dual Mono Mono Automatic NICAM Stereo Mono
26. e home theatre and the HDMI OUT jack of the corresponding Anynet device using an HDMI cable NOTE Connect the Optical cable between the DIGITAL AUDIO OUT OPTICAL jack on your TV and the Digital Audio Input on the Home Theatre When following the connection above the Optical jack only outputs 2 channel audio You will only hear sound from the Home Theatre s Front Left and Right speakers and the subwoofer If you want to hear 5 1 channel audio connect the DIGITAL AUDIO OUT OPTICAL jack on the DVD satellite box i e Anynet Device 1 or 2 directly to the Amplifier or Home Theatre not the TV Connect only one Home Theatre You can connect an Anynet device using the HDMI cable Some HDMI cables may not support Anynet functions Anynet works when the AV device supporting Anynet is in the standby or on status Anynet supports up to 12 AV devices in total Note that you can connect up to 3 devices of the same type 28 English a Setting Up Anynet g Anynet Menu 3 The Anynet menu changes depending on the type and status of the Anynet devices connected to the TV 5 Anynet Menu Description 2 View TV Changes Anynet mode to TV broadcast mode g Device List Shows the Anynet device list gZ Recording recorder Starts recording immediately using the recorder This is only available for devices that g support the recording function device_name MENU Shows the connected device menus E g If a DVD
27. eadjust the picture so that it is aligned to the centre of screen saunyeej oiseg 0 Position Adjust the PC screen position with direction button A WV lt gt Image Reset Resets the image to default settings Click on Control Panel on the Windows start menu Click on Appearance and Themes in the Control Panel window and a display dialog box will appear Click on Display and a display dialog box will appear Navigate to the Settings tab on the display dialog box The correct size setting resolution Optimum 1360 X 768 pixels If a vertical frequency option exists on your display settings dialog box the correct value is 60 or 60 Hz Otherwise just click OK and exit the dialog box D Changing the Preset Sound Mode Mode E Standard Selects the normal sound mode S MODE H Music Emphasizes music over voices H Movie Provides the best sound for movies H Clear Voice Emphasizes voices over other sounds H Amplify Increase the intensity of high frequency sound to allow a better listening experience for the hearing Impaired Engish 15 Basic Features J Adjusting sound settings Equalizer Adjusts the sound mode E Balance L R Adjusts the balance between the right and left speaker HM 100Hz 300Hz 1KHz 3KHz 10KHz Bandwidth Adjustment Adjusts the level of specific bandwidth frequencies E Reset Resets the equalizer to its defau
28. ean the sensor s transmission window on the remote Try pointing the remote directly at the TV from 5 6 feet away The cable set top box remote control doesn t turn the TV on or off or adjust the volume Programme the Cable Set top box remote control to operate the TV Refer to the Cable Set user manual for the SAMSUNG TV code A Not Supported Mode message appears There is a plastic smell from the TV Check the supported resolution of the TV and adjust the external device s output resolution accordingly Refer to the resolution settings on page 8 of this manual This smell is normal and will dissipate over time The TV is tilted to the side Remove the base stand from the TV and reassemble it There are difficulties assembling the stand base Make sure the TV is placed on a flat surface It is necessary to use magnetized screw driver if you cannot remove the screws from the TV The channel menu is greyed out unavailable The Channel menu is only available when the TV source is selected Engish 37 UOHEULOJU 194 O 90 Other Information Issues Solutions and Explanations Your settings are lost after 30 minutes or every time the TV is turned off If the TV is in the Store Demo mode it will reset audio and picture settings every 30 minutes Change the settings from Store Demo mode to Home Use mode in the Plug amp Play Initial setup procedure Press the SOURCE b
29. ect all selected files press the TOOLS button 5 Jan 10 2010 and select Deselect All 3 Press the TOOLS button and select Play Selected Contents fle SUM JA Change Device iSelect I Sorting 42 Tools Playing the video music photo file group 1 While a file list is displayed move to any file in desired group 2 Press the TOOLS button and select Play Current Group Media Play Additional Functions Sorting the file list Press the Blue button in the file list to sort the files Category Operation Videos Music Photos DD Basic View Displays the whole folder You can view the photo by selecting the folder Jv J v Title Sorts and displays the file title in Symbol Number Alphabet Special order v J J C Preference in say me sah i a You can change the file preference in the file V V S Latest Date Sorts and shows files by the latest date vA JV rer Earliest Date Sorts and shows files by the earliest date a Vv Artist Sorts the music file by artist in alphabetical order J LA Album Sorts the music file by album in alphabetical order J Genre Sorts music files by the genre A A Mood Sorts music files by the mood You can change the music mood information v 26 Engish Videos Music Photos Play Option menu Q During playing a file press the TOOLS button gt Category Operation Videos Music Photos S Title You can move the other file
30. ection up to 1080p Available devices DVD Blu ray player HD cable box HD satellite receiver STB cable box satellite receiver STB suono uuog ZO AUDIO OUT PC DVI R AUDIO L AUDIO IN M DVI OUT amp HDMI DVI IN PC DVI AUDIO IN e When using an HDMI DVI cable connection you must use the HDMI DVI IN jack For the DVI cable connection use a DVI to HDMI cable or DVI HDMI DVI to HDMI adapter for video connection and the PC DVI AUDIO IN jacks for audio If an external device such as a DVD Blu ray player Cable Box Satellite receiver Set Top Box supporting a HDMI versions older than 1 3 is connected the TV may operate abnormally e g no screen display no sound annoying flicker abnormal colour If there is no sound after connecting an HDMI cable check the HDMI version of the external device If the version is older than 1 3 contact the provider of the corresponding device to confirm the HDMI version and request an upgrade It is recommended you purchase an HDMI certified cable Otherwise the screen may appear blank or a connection error may occur Using a Component Cable up to 1080p Using an Audio Video Cable 480i only Available devices VCR DVD Blu ray player Cable Box Satellite receiver pret Yellow Red White Red Blue Green AUDIO OUT COMPONENT OUT SIURE e EW 7 18 i eoo o o Q COMPONENT IN AV I
31. ee all the channels searched CH LIST le Fine Tune If the signal is weak or distorted fine tune the channel manually Fine tuned channels are marked with an asterisk a Changing the Preset Picture Mode Mode Select your preferred picture type E Dynamic Suitable for a bright room E Standard Suitable for a normal environment PMODE H Movie Suitable for watching movies in a dark room D Adjusting picture settings Backlight Contrast Brightness Sharpness Colour Tint G R Your television has several setting options for picture quality control NOTE In analogue TV AV modes of the PAL system the Tint G R function is not available In PC mode you can only make changes to Backlight Contrast and Brightness Settings can be adjusted and stored for each external device connected to the TV Economical Solutions ECO Solution E Energy Saving Off Low Medium High Picture Off Auto Adjust the brightness of the TV in order to reduce power consumption If you select Picture Off the screen is turned off but the sound remains on Press any button except volume button to turn on the screen Until the screen turns on again a distorted picture will be displayed for about 4 seconds E No Signal Power Off Off 15 min 30 min 60 min Activates the Stand by mode in the case of No Signal or Check Signal Cable status for a certain period of
32. eiver to the DIGITAL AUDIO OUT OPTICAL jack of the TV amp When the receiver i e Home Theatre is set to On you can hear sound output from the TV s Optical jack When the TV is displaying a DTV aerial signal the TV will send out 5 1 channel sound to the receiver When the source is a digital component such as a DVD and is connected to the TV via HDMI only 2 channel sound will be heard from the receiver amp NOTE e You can only control Anynet devices using the TV remote control not the buttons on the TV The TV remote control may not work under certain conditions If this occurs reselect the Anynett device e The Anynet functions do not operate with other manufacturers products fi Troubleshooting for Anynet Problem Possible Solution Anynet does not work Check if the device is an Anynet device The Anynet system supports Anynet devices only Connect only one receiver home theatre Check if the Anynet device power cord is properly connected Check the Anynet device s Video Audio HDMI Cable connections Check whether Anynet HDMI CEC is set to On in the Anynet setup menu Check whether the TV remote control is in TV mode Check whether it is Anynet exclusive remote control Anynet doesn t work in certain situations Searching channels operating Media Play or Plug amp Play Initial setup etc e When connecting or removing the HDMI cable please make sure to search devices again or tur
33. els are upscaled from SD Standard Definition contents e Adjust the Cable Set top box video output resolution to 1080i or 720p e Make sure you are watching the TV at the minimum recommended distance based on the size and definition of the signal The picture is distorted macroblock error small block dots pixelization e Compression of video contents may cause picture distortion especially in fast moving pictures such as sports and action movies e Low signal level or bad quality can cause picture distortion This is not a TV issue Colour is wrong or missing There is poor colour or brightness e If you re using a component connection make sure the component cables are connected to the correct jacks Incorrect or loose connections may cause colour problems or a blank screen e Adjust the Picture options in the TV menu go to Picture mode Colour Brightness Sharpness e Adjust Energy Saving option in the TV menu go to MENU Picture ECO solution Energy Saving P 13 e Try resetting the picture to view the default picture settings go to MENU Picture Picture Reset There is a dotted line on the edge of the screen e If the picture size is set to Screen Fit change it to 16 9 P 14 e Change cable set top box resolution The picture is black and white e If you are using an AV composite input connect the video cable yellow to the Green jack of component input 1 on the TV When changi
34. en press the ENTER C button in the Media Play menu 2 Press the lt gt A button to select the desired video in the file list 3 Press the ENTER C button or gt Play button The selected file is displayed on the top with its playing time If video time information is unknown play time and pregress bar are not displayed During video playback you can search using lt and gt button amp In this mode you can enjoy movie clips contained on a Game but you cannot play the Game itself e Supported Subtitle Formats Name File extension Format MPEG 4 time based text ttxt XML SAMI smi HTML SubRip srt string based SubViewer sub string based Micro DVD Sub or txt string based 00 04 03 00 07 38 Movie 01 avi C Pause 4 Jump 41 Tools Retum English 23 Advanced Features Supported Video Formats Frame rate Bit rate File Extention Container Video Codec Resolution fps Mbsp Audio Codec Divx 3 11 4 x 5 1 6 0 1920x1080 6 30 8 avi AVI XviD 1920x1080 6 80 8 MP8 AC3 LPCM mkv MKV H 264 BP MP HP 1920x1080 6 30 25 ADPCM DTS HD MPEG4 SP ASP 1920x1080 6 30 8 Divx 3 11 4 x 5 1 6 0 1920x1080 6 30 as bes XviD 1920x1080 6 30 8 MP3 AC3 LPCM H 264 BP MP HP 1920x1080 6 30 25 ADPCM WMA MPEG4 SP ASP 1920x1080 6 30 8 wmv ASF W
35. er s volume to an appropriate level e With the TV powered off you will hear noise from the FM receiver e g a radio or a home theater e Frequency interference with other electronic devices is an issue common to all radio communications devices and can cause interruptions in audio and or noise fl Supported FM Transmitter formats SPEC Normal 88 0MHz 107 9MHz Frequency Range Automatic range setting Match the TV Frequency In 88 0MHz 107 9MHz Minimum 1m 5m Transfer dist raisin distando Maximum 5m 10m Depend on Antenna position and receiver quality 32 Engish Analogue Channel Teletext Feature The index page of the Teletext service gives you information on how to use the service For Teletext information to be displayed correctly channel reception must be stable Otherwise information may be missing or some pages may not be displayed You can change Teletext pages by pressing the numeric buttons on the remote control o Teletext on mir Activate the Teletext mode after selecting the channel providing the Teletext service Press it twice to overlap the Teletext mode with the current broadcasting screen store Store the Teletext pages size Display the double size letters on the upper half of the a eT POWER SOURCE S gt 0 LILIGI LLI Le CILL ameo page up Display the next Teletext page page down Display the previous Teletext page
36. g device into the Kensington slot on the LCD TV and turn it in the locking direction 2 Connect the Kensington Lock cable 3 Fix the Kensington Lock to a desk or a heavy stationary object UOHEULOJU 194 O 90 lt Optional gt amp The locking device has to be purchased separately amp The location of the Kensington Lock may be different depending on its model Securing the TV to the Wall children do not hang over or destabilize the TV doing so may cause the TV to tip over resulting in serious injuries or death Follow all safety precautions provided on the included Safety Flyer For added stability install the anti fall device for safety purposes as follows A Caution Pulling pushing or climbing onto the TV may cause the TV to fall In particular ensure that your To avoid the TV from falling Since the necessary clamps screws and string are not supplied please purchase these additionally 1 Drive the screws into the clamps and firmly fasten them onto the wall Make sure the screws are firmly fixed into the wall Screw Specifications e Fora 17 29 Inch LCD TV M4 For a 30 40 Inch LCD TV M6 2 Remove the screws from the centre back of the TV put the screws into the clamps and then fasten the screws onto the TV poet ten again 3 Connect the clamps fixed onto the TV and the clamps fixed onto the wall with a strong string and then tie the string tightly pied L I Wall N S
37. he group of the channel a Scheduled Shows all the currently reserved programmes amp Using the colour buttons with the Channel Manager Green Zoom Enlarges or shrinks a channel number E Yellow Select Select desired channels and press the Yellow button to set all the selected channels at the same time The YW mark appears to the left of the selected channels Page Move to next or previous page 4 Tools Displays the Channel Manager option menu The Options menus may differ depending on the situation Channel Status Display Icons Icons Operations WA A channel selected Y A channel set as a Favourite fa A locked channel A reserved programme Engish 11 Basic Features a Using Favourite Channels My Channels in Channel Manager Shows all favourite channels m Edit My Channels You can set the selected channels to desired my channels group A The Y symbol will be displayed and the channel will be set as a my channel 1 Select a channel and press the TOOLS button 2 Add or delete a channel in the my channel groups you want among 1 2 3 and 4 One or more groups can be selected 3 After you have changed the settings the channel list for each group can be viewed in My Channels Aerial or Cable channel mode My Channel 1 My Channel My Channel My Channel lt 2 gt D 5 5 o a BiZoom W Select Page Programme mo
38. he set might operate abnormally if a non standard video format is selected e Separate and Composite modes are supported SOG Sync on Green is not supported Engish DL Advanced Features Media Play Enjoy photos music and or movie files saved on a Mediana MEDIA P USB Mass Storage Class MSC device m SUM Connecting a USB Device 1 Turn on your TV TV Side Panel or 2 Connect a USB device containing photo music and or movie files to the USB jack on the side of the TV 3 When USB is connected to the TV popup window appears Then you can select Media Play TV Rear Panel USB oS Gc D ed USB Drive USB Drive Wit might not work properly with unlicensed multimedia files Q Need to Know List before using Media Play e MTP Media Transfer Protocol is not supported e The file system supports FAT16 FAT32 and NTFS e Certain types of USB Digital camera and audio devices may not be compatible with this TV e Media Play only supports USB Mass Storage Class MSC devices MSC is a Mass Storage Class Bulk Only Transport device Examples of MSC are Thumb drives Flash Card Readers USB HUB are not supported Devices should be connected directly to the TV s USB port e Before connecting your device to the TV please back up your files to prevent them from damage or loss of data SAMSUNG is not responsible for any data file damage or data loss Do not disconnect the
39. igital Audio Cable Analogue Connection Available devices digital audio system amplifier DVD home theatre Digital Audio System DIGITAL Red White AUDIO OUT OPTICAL amp DIGITAL AUDIO OUT OPTICAL e When a digital audio system is connected to the DIGITAL AUDIO OUT OPTICAL jack decrease the volume of both the TV and the system e 5 1CH channel audio is available when the TV is connected to an external device supporting 5 1CH e When the receiver home theatre is set to on you can hear sound output from the TV s optical jack When the TV is receiving a DTV signal the TV will send 5 1 CH sound to the home theatre receiver When the source is a digital component such as a DVD Blu ray player cable box satellite receiver Set Top Box and is connected to the TV via HDMI only 2 CH audio will be heard from the home theatre receiver If you want to hear 5 1 CH audio connect the digital audio out jack from your DVD Blu ray player Cable Box Satellite receiver Set Top Box directly to an amplifier or home theatre amp AUDIO OUT Connects to the audio input jacks on your amplifier DVD home theatre e When connecting use the appropriate connector e When an audio amplifier is connected to the AUDIO OUT jacks Decrease the volume of the TV and adjust the volume level with the Amplifier s volume control 8 English Connecting to an AV Device LA22C450 Using an HDMI DVI Cable HD conn
40. indow Media Video v9 1920x1080 6 30 25 WMA H 264 BP MP HP 1920x1080 6 30 25 mp4 MP4 MPEG4 SP ASP 1920x1080 6 30 8 MP3 ADPCM AAG XVID 1920x1080 6 30 H 264 BP MP HP 1920x1080 6 30 25 8gp 3GPP ADPCM AAG HE AAC MPEG4 SP ASP 1920x1080 6 30 8 VRO MPEG1 1920x1080 24 25 30 30 an VOB MPEG2 1920x1080 24 25 30 30 eee e cece MPEG 1920x1080 24 25 30 30 WS PS MPEG2 1920x1080 24 25 30 30 AC3 MPEG LPCM AAC H 264 1920x1080 6 30 25 ne MPEG2 1920x1080 24 25 30 30 Pr ee a TS H 264 1920x1080 6 30 25 Hee VC1 1920x1080 6 30 25 Other Restrictions amp NOTE e If there are problems with the contents of a codec the codec will not be supported e If the information for a Container is incorrect and the file is in error the Container will not be able to play correctly Sound or video may not work if the contents have a standard bitrate frame rate above the compatible Fram sec listed in the table above Ifthe Index Table is in error the Seek Jump function is not supported Video Decoder e Supports up to H 264 Level 4 1 e H 264 FMO ASO RS VC1 SP MP AP L4 and AVCHD are not supported e H 263 is not supported e GMC 2 over is not support e Supports up to WMA 7 8 9 STD e WMAQPRO does not support 2 channel excess multi channel or lossless audio e WMA sampling rate 22050Hz mono is not supported Audio Decoder D4 Engish Playing movie con
41. le programme Available only when the Input source is set to TV E Change PIN Change your personal ID number required to set up the TV f you forget the PIN code press the remote control buttons in the following sequence which resets the PIN to 0 0 0 0 POWER off gt MUTE gt 8 gt 2 4 POWER on Engish 17 saunjeej oiseg 0 Basic Features D Other Features Menu Language Set the menu language General E Game Mode Off On When connecting to a game console such as PlayStation or Xbox you can enjoy amore realistic gaming experience by selecting game mode amp NOTE e Precautions and limitations for game mode To disconnect the game console and connect another external device set Game Mode to Off in the setup menu If you display the TV menu in Game Mode the screen shakes slightly Game Mode is not available in TV and PC mode When Game Mode is set to On Scart out is not supported e After connecting the game console set Game Mode to On to prevent poor picture quality If Game Mode is On Picture mode is set to Standard and Sound mode is set to Movie Game Mode is only for playing the game E Menu Transparency Bright Dark Set the Transparency of the menu H Melody Off Low Medium High Set so that a melody plays when the TV is turned on or off 18 Engish i Picture In Picture PIP PIP Watches simultaneously the TV tuner and one ex
42. lock Timer Viewing Sort Delete Select All Deselect All Option menu items may differ depending on the channel status 1 Select a channel and press the TOOLS button 2 Select a function and change its settings E Lock Unlock Lock a channel so that the channel cannot be selected and viewed NOTE e This function is available only when the Child Lock is set to On The PIN input screen appears Enter your 4 digit PIN the default of which is 0 0 0 0 Change the PIN using the Change PIN option E Timer Viewing You can set a desired channel to be displayed automatically at the intended time Set the current time first to use this function E Sort This operation allows you to change the programme numbers of the stored channels This operation may be necessary after using the auto store HM Delete You can delete a channel to display the channels you want H Select All Deselect All Select all the channels or deselect all the selected channels in the channel manager Scheduled in Channel Manager You can view modify or delete a a show you have reserved to watch E Change Info Change a show you have reserved to watch E Cancel Schedules Cancel a show you have reserved to watch E Information Display a show you have reserved to watch You can also change the reservation information E Select All Deselect All Select or deselect all reserved programmes Channel List You can s
43. lt settings Sound Systems Etc Virtual Surround Off On This function provides a virtual 5 1 channel surround sound experience through a pair of speakers or headphones using HRTF Head Related Transfer Function technology W if Speaker Select is set to External Speaker Virtual Surround is disabled Dialog Clarity Off On This function allows you to increase the intensity of a voice over background music or sound effects so that dialog can be heard more clearly when viewing a show Auto Volume Off Normal Night To equalize the volume level on each channel set to Normal H Night This mode provides an improved sound experience compared to Normal mode making almost no noise It is useful at night Speaker Select A sound echo may occur due to a difference in decoding speed between the main speaker and the audio receiver In this case set the TV to External Speaker amp When Speaker Select is set to External Speaker the volume and MUTE buttons will not operate and the sound settings will be limited amp When Speaker Select is set to External Speaker you should use these settings TV Speaker Off External speaker On amp When Speaker Select is set to TV Speaker you should use these settings e TV speaker On External speaker On amp If there is no video signal both speakers will be mute 16 Engish SPDIF Output SPDIF Sony Philips Digital Interface is used to provid
44. n the device is corrupted or a file in the list is not played connect the USB device to the PC format the device and check the connection e Ifa file deleted from the PC is still found when Media Play is run use the Empty the Recycle Bin function on the PC to permanently delete the file 22 English D Screen Display Move to the desired file using the up down right left buttons and then press the ENTER C or gt Play button The file is played BQ Supports the View Devices and Contents Mode in Media Play homepage Information You can ascertain the selected file name and the number of files and page i Z Movie 02 avi leos Movie 01 avi Movie 03 avi Movie 04 avi Movie 05 avi Movie 06 avi Sort List Section Displays the sorting standard amp The Sorting standard is soinjyee4 peoueApy 0 File List Section You can confirm the files and groups that is sorted by each category supported in Basic view Yellow Select Selects multiple files from file list Selected files are marked with a symbol Q amp Q Using the V CH A button file list can move to next or previous page different depending on the contents Operation Button Red Device Selects a connected device E Green Preference Sets the file preference not O Blue Sorting Select the sort list Tools Displays the option menu Videos Playing Video 1 Press the lt or gt button to select Videos th
45. n your TV off and on again e Check if the Anynet Function of Anynet device is set on want to start Anynet e Check if the Anynet device is properly connected to the TV and check if the Anynet HDMI CEC is set to On in the Anynet Setup menu e Press the TOOLS button to display the Anynet menu and select a menu you want want to exit Anynet e Select View TV in the Anynet menu e Press the SOURCE button on the TV remote control and select a device other than Anynet devices e Press P A PRE CH and FAV CH to change the TV mode Note that the channel button operates only when a tuner embedded Anynet device is not connected The message Connecting to e You cannot use the remote control when you are configuring Anynet or switching to a view mode Anynet device appears on the e Use the remote control when the Anynet setting or switching to view mode is complete screen The Anynet device does not play You cannot use the play function when Plug amp Play Initial setup is in progress The connected device is not e Check whether or not the device supports Anynet functions displayed e Check whether or not the HDMI Cable is properly connected e Check whether Anynet HDMI CEC is set to On in the Anynet setup menu e Search Anynet devices again e You can connect an Anynet device using the HDMI Cable only Some HDMI cables may not support Anynet functions e If it is terminated b
46. ng channels the picture freezes or is distorted or delayed e If connected with a cable box please try to reset the cable box Reconnect the AC cord and wait until the cable box reboots It may take up to 20 minutes e Set the output resolution of the cable box to 1080i or 720p Sound Quality First of all please perform the Sound Test to confirm that your TV audio is properly operating go to MENU Support Self Diagnosis Sound Test P 19 If the audio is OK the sound problem may caused by the source or signal There is no sound or the sound is too low at maximum volume e Please check the volume the of external device connected to your TV The picture is good but there is no sound e Set the Speaker Select option to TV speaker in the sound menu P 16 e If you are using an external device make sure the audio cables are connected to the correct audio input jacks on the TV e If you are using an external device check the device s audio output option ex you may need to change your cable box s audio option to HDMI when you have a HDMI connected to your TV e If you are using a DVI to HDMI cable a separate audio cable is required e If your TV has a headphone jack make sure there is nothing plugged into it The speakers are making an inappropriate noise e Check the cable connections Make sure a video cable is not connected to an audio input e For antenna or cable connections check the signal s
47. onnection use a DVI to HDMI cable or DVI HDMI DVI to HDMI adapter for video connection and the PC DVI AUDIO IN jacks for audio If an external device such as a DVD Blu ray player Cable Box Satellite receiver Set Top Box supporting a HDMI versions older than 1 3 is connected the TV may operate abnormally e g no screen display no sound annoying flicker abnormal colour If there is no sound after connecting an HDMI cable check the HDMI version of the external device If the version is older than 1 3 contact the provider of the corresponding device to confirm the HDMI version and request an upgrade It is recommended you purchase an HDMI certified cable Otherwise the screen may appear blank or a connection error may occur Using a Component Cable up to 1080p Using an Audio Video Cable 480i only Available devices VCR DVD Blu ray player Cable Box Satellite receiver o1nv O REET PJ C Jro Yelow Red White Red Blue Green COMPONENT OUT EINTE JEN a ma m m 0 00 gt Q COMPONENT IN AV IN 1 When connecting to AV IN 1 the colour of the AV IN 1 Y VIDEO jack Green does not match the colour of the video cable Yellow amp To obtain the best picture quality the Component connection is recommended over the A V connection Engish 7 suono uuog ZO Connections Connecting to an Audio Device LA26C450 LA32C450 Using an Optical Cable D
48. or wall mounts that do not comply with the VESA standard screw specifications the length of the screws may differ depending on their specifications Do not use screws that do not comply with the VESA standard screw specifications Do not fasten the screws too strongly this may damage the product or cause the product to fall leading to personal injury Samsung is not liable for these kinds of accidents Samsung is not liable for product damage or personal injury when a non VESA or non specified wall mount is used or the consumer fails to follow the product installation instructions Do not exceed 15 degrees tilt when mounting this TV Product Family inches VESA Spec A B Standard Screw Quantity 19 22 75 X 75 100 X100 M4 23 29 200 X 100 30 40 200 X 200 M6 LCD TV 46 55 400 X 400 4 57 65 600 X 400 70 80 800 X 400 Me 80 1400 X 800 A Do not install your Wall Mount Kit while your TV is turned on It may result in personal injury due to electric shock 34 Engish Anti Theft Kensington Lock The Kensington Lock is a device used to physically fix the system when using it in a public place The appearance and locking method may differ from the illustration depending on the manufacturer Refer to the manual provided with the Kensington Lock for proper use amp Please find a Ri icon on the rear of the TV A kensington slot is beside the R icon 1 Insert the lockin
49. picture quality amp Disabled under PC mode HDMI Black Level Normal Low Selects the black level on the screen to adjust the screen depth Available only in HDMI mode RGB signals E Film Mode Off Auto1 Auto2 Sets the TV to automatically sense and process film signals from all sources and adjust the picture for optimum quality amp Available in TV AV COMPONENT 480i 1080i and HDMI 480i 1080 H Auto Protection Time 2 hours 4 hours 8 hours 10 hours Off If the same image remains on the screen Auto Screen Burn Protector will work Picture Reset OK Cancel Resets your current picture mode to its default settings Setting up the TV with Your PC Set the input source to PC Auto Adjustment Adjust frequency values positions and fine tune the settings automatically Not available when connecting through HDMI DVI cable Screen Using Your TV as a Computer PC Display Setting Up Your PC Software Based on Windows XP Depending on the version of Windows and the video card the actual screens on your PC may differ in which case the same basic set up information will almost always be applied If not contact your computer manufacturer or Samsung Dealer 1 2 Coarse Fine Removes or reduces picture noise If the noise is not removed by Fine tuning alone then adjust the frequency as best as possible Coarse and Fine tune again After the noise has been reduced r
50. recorder is connected the disc menu of the DVD recorder will appear device_name INFO Shows the play menu of the connected device E g If a DVD recorder is connected the play menu of the DVD recorder will appear Stop Recording recorder Stops recording Receiver Sound is played through the receiver If more than one recording device is connected they are displayed as recorder and if only one recording device is connected it will be represented as device_name H Setup Anynet HDMI CEC Off On To use the Anynet Function Anynet HDMI CEC must be set to On amp When the Anynet HDMI CEC function is disabled all the Anynet related operations are deactivated Auto Turn Off No Yes Setting an Anynet Device to turn off automatically when the TV is turned off The active source on the TV must be set to TV to use the Anynet function Even if an external device is still recording it may turn off a Switching between Anynet Devices 1 Anynet devices connected to the TV are listed it you cannot find a device you want press the red button to refresh the list 2 Select a device and press the ENTER C button You can switch to the selected device amp Only when you set Anynet HDMI CEC to On in the Application menu the Device List menu appears e Switching to the selected device may take up to 2 minutes You cannot cancel the operation during the switching operation e If yo
51. rt Contents A Selected page number D Date and time B Broadcasting channel identity E Text Current page number or search indications Status information FASTEXT F information English 33 UOHEULOJU 1494 O GO Other Information Installing the Wall Mount Kit amp See separate guide for installation Wall mount items sold separately allow you to mount the TV on the wall For detailed information on installing the wall mount see the instructions provided with the Wall Mount items Contact a technician for assistance when installing the wall mount bracket Samsung Electronics is not responsible for any damage to the product or injury to yourself or others if you elect to install the TV on your own Wal Mount Kit Specifications VESA amp wall mount kit is not supplied but sold separately Install your wall mount on a solid wall perpendicular to the floor When attaching to other building materials please contact your nearest dealer If installed on a ceiling or slanted wall it may fall and result in severe personal injury amp NOTE Standard dimensions for wall mount kits are shown in the table below When purchasing our wall mount kit a detailed installation manual and all parts necessary for assembly are provided Do not use screws longer than the standard dimension as they may cause damage to the inside of the TV set F
52. s connected to the TV Channel when the Source is set to TV Select the desired channel Contents when the Source is set to USB Select a folder in the USB device containing music or photo files to be played when the TV is turned on automatically amp if there is no music file on the USB device or the folder containing a music file is not selected the Timer function does not operate correctly amp When there is only one photo file in the USB device the Slide Show will not play Ifa folder name is too long the folder cannot be selected amp Each USB you use is assigned its own folder When using more than one of the same type of USB make sure the folders assigned to each USB have different names Repeat Select Once Everyday Mon Fri Mon Sat Sat Sun or Manual to set at you convenience If you select Manual you can set up the day you want to activate the timer The v mark indicates the day is selected amp Auto Power Off available only when the TV is turned on by Timer The TV will be automatically turned off after 3 hours of being left idle to prevent overheating D Locking Programmes Security amp The PIN input screen appears before the setup screen I Enter your 4 digit PIN the default of which is 0 0 0 0 Change the PIN using the Change PIN option H Child Lock Off On Lock channels in Channel Manager to prevent unauthorized users such as children from watching unsuitab
53. select Photos then press the ENTER C button in the Media Play menu 2 Press the lt gt A V button to select the desired photo in the file list 3 Press the ENTER C button or gt Play button While a photo list is displayed press the gt Play ENTER C button on the remote control to start the slide show All files in the file list section will be displayed in the slide show During the slide show files are displayed in order Music files can be automatically played during the Slide Show if the Background Music is set to On amp The BGM Mode cannot be changed until the BGM has finished loading 00 04 03 00 07 38 Movie 01 avi D Play continuously esumes playing from the last viewed D Play continuously 4 Pause 4 gt Jump 1 Tools 5 Return Love you Music 1 No Si 01 10 04 02 4 Pause lt gt Jump 42 Tools 5 Return ES gt Normal 4 Pause lt gt Previous Next 42 Tools 5 Return Engish 25 s m e 4 peoueApy 0 Advanced Features D Playing Multiple Files Playing selected video music photo files 1 Press the Yellow button in the file list to select the desired file 2 Repeat the above operation to select multiple files videos movootai 2fles selected 1 1 Page NOTE e The v mark appears to the left of the selected files gt A e To cancel a selection press the Yellow button again van 10 2010 To desel
54. ternal video source PIP Picture in Picture does not function in the same mode W NOTE e Ifyou turn the TV off while watching in PIP mode the PIP window will disappear You may notice that the picture in the PIP window becomes slightly unnatural when you use the main screen to view a game or karaoke PIP settings Main picture Sub picture n HDMI1 DVI 22 Component PC TV AV2 HDMI1 DVI HDMI2 HDMI3 Component2 TV AV1 AV2 26 32 pc Componenti TV AV2 PIP Off On Activate or deactivate the PIP function E Source TV AV1 AV2 Select a source of the sub picture E Channel Select the channel for the sub screen E Size iml _ Select a size for the sub picture E Position J L9 EJ t sub picture E Sound Select Main Sub You can choose the desired sound Main Sub in PIP mode Select a position for the Support Menu Self Diagnosis Picture Test Yes No Use to check for picture problems and if the problem continues to occur check the colour pattern Sound Test Yes No Use the built in melody sound to check for sound problems f you hear no sound from the TV s speakers before performing the sound test make sure Speaker Select is set to TV speaker in the Sound menu The melody will be heard during the test even if Speaker Select is set to External Speaker or the sound is muted by pressing
55. ting Temperature Operating Humidity 10 C to 40 C 50 F to 104 F 10 to 80 non condensing Storage Temperature 20 C to 45 C 4 F to 113 F Storage Humidity 5 to 95 non condensing Stand Swivel Left Right o Model Name LA22C450 LA26C450 LA32C450 Screen Size Diagonal 22 inch 26 inch 32 inch some BW x2 BW x2 10W x2 Output S ED 533 2 X 60 8 X 354 4 mm 646 5 X 77 0 X 432 3 mm 784 4 X 76 2 X 514 2 mm Te 533 2 X 171 9 X 402 5 mm 646 5 X 222 2 X 477 3 mm 784 4 X 247 2 X 560 0 mm Weight Without Stand D es s ee a With Stand aang 99 an amp Design and specifications are subject to change without prior notice For the power supply and power consumption refer to the abel attached to the product English 39 UOHEUWOJU 194 O SO Other Information A Anynet AUDIO OUT Auto Adjustment Amplify Auto Volume B Balance L R Batteries Brightness Background Music Black Tone Basic View C Component Channel Menu Clock Colour Tone Connecting to a PC Connecting to an Audio Device Change PIN D DIGITAL AUDIO OUT D sub Dynamic Dynamic Contrast Divx VOD E Editing Channels Energy Saving Equalizer External Speaker Edit Name 40 Engish 28 15 15 16 16 13 27 14 26 11 17 14 20 8 17 28 20 13 14 27 12 13 16 16 10 F Favourite Channel Fine Tune Flesh Tone Film Mode Frequency H
56. tinuously Resume Play If you exit the playing movie function the movie can be played later from the point where it was stopped 1 Select the movie file you want to play continuously by pressing the lt or gt button to select it from the file list section 2 Press the gt Play ENTER C button 3 Select Play Continuously Resume Play by pressing the Blue button The Movie will begin to play from where it was stopped The Blue button is available when resuming play amp Ifthe Cont movie play help function is set to On in the Settings menu a pop up message will appear when you resume play a movie file Music Playing Music 1 Press the lt or gt button to select Music then press the ENTER C button in the Media Play menu 2 Press the lt A button to select the desired Music in the file list 3 Press the ENTER C button or gt Play button During music playback you can search using lt and gt utton 44 REW and gt gt buttons do not function during play Qy Only displays the files with MP3 and PCM file extension Other file extensions are not displayed even if they are saved on the same USB device amp If the sound is abnormal when playing MP3 files adjust the Equalizer in the Sound menu An over modulated MP3 file may cause a sound problem Photos Viewing a Photo or Slide Show 1 Press the lt or gt button to
57. tion when your TV does not work properly or when you want to upgrade the software You can find information regarding our call centres and how to download products and software English 19 Advanced Features Using an HDMI DVI Cable a D sub Cable DVI OUT AUDIO PC OUT AUDIO OUT f e Connecting to a PC LA22C450 Using an HDMI DVI Cable a D sub Cable DVI OUT 20 English Display Modes D Sub and HDMI DVI Input g Optimal resolution is 1360X768 60HZz Q 4 Horizontal Frequency Vertical Frequency Pixel Clock Frequency Sync Polarity lt Mode Resolution KHz Hz MHz H V 5 IBM 640 x 350 31 469 70 086 25 175 2 720 x 400 31 469 70 087 28 322 1 MAC 640 x 480 35 000 66 667 30 240 O 832 x 624 49 726 74 551 57 284 vE 31 469 59 940 25 175 Oo 640 x 480 37 861 72 809 31 500 o 37 500 75 000 31 500 37 879 60 317 40 000 800 x 600 48 077 72 188 50 000 VESA DMT 46 875 75 000 49 500 48 363 60 004 65 000 1024 x 768 56 476 70 069 75 000 60 023 75 029 78 750 1360 x 768 47 712 60 015 85 500 720 x 576 35 910 59 950 32 750 56 456 74 717 95 750 eo a 44 772 59 855 74 500 VESA GTF 1280 x 720 52 500 70 000 89 040 amp NOTE e For HDMI DVI cable connection you must use the HDMI IN 1 DVI jack e The interlace mode is not supported e T
58. to an increase in the internal temperature of the product amp When using a stand or wall mount use parts provided by Samsung Electronics only Ifyou use parts provided by another manufacturer it may result in a problem with the product or an injury due to the product falling amp amp The appearance may differ depending on the product Installation with a stand Installation with a wall mount 10 cm 10 cm 2 English Contents Accessories Viewing the Control Panel Viewing the Remote Control Connecting to an Antenna Plug amp Play Initial Setup Getting Started OORA A Connecting to an AV Device LA26C450 LA382C 450 Connecting to an Audio Device _LA26C450 LA82C450 Connecting to an AV Device LA22C 450 O Connecting to an Audio Device LA22C450 Changing the Input Source Connections ON Basic Features 1 How to Navigate Menu 1 Channel Menu 3 Picture Menu 15 Sound Menu 7 Setup Menu 9 Support Menu Advanced Features 20 Connecting to a PC LA26C450 LA32C450 20 Connecting to a PC LA22C450 22 Media Play 28 Anynet Other Information 31 FM Transmitter Setup 33 Analogue Channel Teletext Feature 34 Installing the Wall Mount 35 Anti Theft Kensington Lock 85 Securing the TV to the Wall 36 Troubleshooting 39 Specifications 40 Index Check the Symbol Q This function can be used by One touch button pressing the TOOLS button on the remote control
59. trength Low signal level may cause sound distortion 36 Engish Issues Solutions and Explanations No Picture No Video The TV won t turn on Make sure the AC power cord is securely plugged in to the wall outlet and the TV Make sure the wall outlet is working Try pressing the POWER button on the TV to make sure the problem is not the remote If the TV turns on refer to The remote control does not work below The TV turns off automatically Ensure the Sleep Timer is set to Off in the Setup menu P 17 If your PC is connected to the TV check your PC power settings Make sure the AC power cord is plugged in securely to the wall outlet and the TV When watching TV from an antenna or cable connection the TV will turn off after 10 15 minutes if there is no signal There is picture Video Check cable connections remove and reconnect all cables connected to the TV and external devices Set your external devices Cable Set top Box DVD Blu ray etc video outputs to match the connections to the TV input For example if an external device s output is HDMI it should be connected to an HDMI input on the TV Make sure your connected devices are powered on Be sure to select the TV s correct source by pressing the SOURCE button on the TV remote RF Cable Antenna Connection The TV is not receiving all channels Make sure the Antenna cable is connected securely Please try Plug
60. u have selected external input mode by pressing the SOURCE button you cannot use the Anynet function Make sure to switch to an Anynet device by using the Device List Al Recording You can make a recording of a TV programme using a Samsung recorder 1 Select Recording amp When there are more than two recording devices e When multiple recording devices are connected the recording devices are listed Select one recording device in the Device List amp When the recording device is not displayed select Device List and press the Red button to search devices 2 Press the EXIT button to exit amp You can record the source streams by selecting Recording device_name amp Pressing the Le REC button will record whatever you are currently watching If you are watching video from another device the video from the device is recorded Before recording check whether the antenna jack is properly connected to the recording device To properly connect an antenna to a recording device refer to the recording device s users manual English 29 Advanced Features al Listening through a Receiver You can listen to sound through a receiver i e Home Theatre instead of the TV speaker 1 Select Receiver and set to On 2 Press the EXIT button to exit if your receiver supports audio only it may not appear in the device list The receiver will work when you have properly connected the optical in jack of the rec
61. utton to select TV mode and go to MENU gt Setup Plug amp Play Initial setup gt ENTER C P 6 You have intermittent loss of audio or video Check the cable connections and reconnect them Loss of audio or video can be caused by using overly rigid or thick cables Make sure the cables are flexible enough for long term use If mounting the TV to the wall we recommend using cables with 90 degree connectors You see small particles when you look closely at the edge of the frame of the TV This is part of the product s design and is not a defect The PIP menu is not available PIP functionality is only available when you are using a HDMI PC or components source P 18 You turned the TV off 45 minutes ago and it turned on again It is normal The TV operates the OTA Over The Aerial function itself to upgrade firmware downloaded whilst your watching TV There are recurrent picture sound issues Check and change the signal source A reaction may occur between the rubber cushion pads on the base stand and the top finish of some furniture To prevent this use felt pads on any surface of the TV that comes in direct contact with furniture This TFT LCD panel uses a panel consisting of sub pixels which require sophisticated technology to produce However there may be a few bright or dark pixels on the screen These pixels will have no impact on the performance of the product a
62. y an abnormal situation such as disconnecting the HDMI cable or power cord or a power failure please repeat the device scan The TV programme cannot be e Check whether the antenna jack on the recording device is properly connected recorded The TV sound is not output e Connect the optical cable between TV and the receiver through the receiver 30 Engish Other Information amp Not available in some locations i Frequency Configuration e FM transmitter s frequency must be set differently from any FM radio frequency in the vicinity of the TV in order to achieve good signal receptivity free of radio interference e fa TV channel frequency falls within the FM frequency range the FM transmitter will automatically update its permissible frequency range e Identical TV channel and FM transmitter frequency will result in signal interference To prevent this the FM transmitter s frequency range is automatically displayed e If there is no TV channel frequency within the FM frequency range 83MHz to 108MH2z the entire range from 88 0MHz to 107 9Ml is available for use D FM Transmitter Installation Guide The FM transmitter module features an integrated antenna Antenna signal strength will vary depending on where the antenna is installed and on the performance of the receiver If you experience poor signal strength try installing the antenna in one of the methods shown below Method 1 Method 2 Slightly extend the antenna an

Samsung LA22C450E1 User Manual

Contents

Download Pdf Manuals

Related Search

Related Contents