Home

Samsung 520DX User Manual

1. The color and the appearance may differ depending on the product and the specifications are subject to change without prior notice to improve the performance Safety Instructions Notational Power Note These safety instructions must be followed to ensure your safety and prevent property dam age Make sure to read the instructions carefully and use the product in the correct manner o Warning Caution Failure to follow directions noted by this symbol could result in bodily AN harm or damage to the equipment O Notational Conventions Important to read and under Prohibited stand at all times Disconnect the plug from the outlet Y Do not disassemble Ground to prevent an electric Do not touch ock O A When not used for extended period of time set your computer to DPM If using screen saver set it to active screen mode The images here are for reference only and are not applicable in all cases or countries Shortcut to Anti Afterimage Instructions 3 Do not use a damaged power cord or plug or a damaged or loose power outlet e Otherwise this may result in electric shock or fire L Do not touch the power plug with wet hands when removing or plugging the plug into the outlet e Otherwise this may result in electric shock Make sure to connect the power cord to a grounded power out let e Otherwise it may result in electric shock or personal injury Installatio
2. File Remocon Safety Lock Port Selection Help Power On Power Off Volume DEE 4 Ye Info Grid shows some basic information necessary to Power Control 1 Power Status 2 Input 3 Image Size 4 On Timer 5 Off Timer 2 Use the Select All button or Check Box to choose a display to control i Multiple Disp File Remocon Safety Lock Port Selection Help Select fut Clear Alt Power On Power Off Volume 10 ae Je M Power Control allows controlling some of the functions of the selected display 1 Power On Off Turns the power of the selected display On Off 2 Volume Controls the volume level of the selected display It receives the volume value of the selected display from the sets and displays it in the slider When you cancel the selection or choose Select All the value returns to the default value 10 3 CBN Mute On Off Turns on off the Mute function of the selected display When selecting one set at a time turn on the Mute function for the selected set The Mute function is disabled automatically when you adjust the volume level The values return to the default settings when you undo the selections or choose Select All k The Power Control feature is available for all displays The Volume Control and Mute features are available only for the displays whose power status is ON ro Input Source 1 Click Input Source of the main icons and the Input Source control screen
3. Lamp Control 1 Click on the Maintenance icon in the Main Icon column to display the Maintenance screen Be Multiple Display Control File Remocon Safety Lock Port Selection Help Select Al Clear All papo I CIEE Auto Lamp Control ma Max Apply G Manual Lamp Control D Je An Info Grid showing several basic data items appears 1 Maintenance Allows the Maintenance Control function for all input sources 2 Auto Lamp Control Automatically adjusts the backlight of the selected display at a specified time The Manual Lamp Control automatically turns off if you adjust using the Auto Lamp Control 3 Manual Lamp Control Allows you to adjust the backlight of the selected display regardless of the time The Auto Lamp Control automatically turns off if you adjust using the Manual Lamp Control The Maintenance Control feature is available only for the displays whose power status is ON The Input source of Magicl nfo works only on Magici nfo model The Input source of TV works only on TV model 9 Maintenance Y Scroll 1 Click on the Maintenance icon in the Main Icon column to display the Maintenance screen Ba Multiple Display Cont File Remocon Safety Lock Port Selection Help SelectAll Clear All 1 Scroll This function is used to remove the afterimages that occur when a still screen is displayed on the selected display for a long time 2 Pixel Shift
4. Set the Safety Lock function When setting the Lock function you can only operate power and lock buttons on the remote control and set The setting for the PC Serial Port can change The original value is COM1 Click Select all or Clear to select or clear all displays Use Grid to view brief information on selected display Select a display from Display Selection o N 4 u Use Control Tools to control displays lt Note gt The remote control Enable Disable function operates whether or not the power is On Off and this applies to all displays connected to the MDC However regardless of the status at the time the MDC is shut down the remote control signal receiving function of all displays is initialized to Enable when the MDC is closed Port Selection a Multiple Display Conio Fie Remocon Safety Lock Port Se jac ton Help 1 m w PC 169 ana Power On Power Off a Volume a aa oT The Multiple Display Control is originally set to COM1 If any port other than COM1 is used COM1 through COM4 can be selected in the Port Selection Menu If the exact port name that is connected to the LCD Display using a serial cable is not selected communication will be unavailable The selected port is stored in the program and used for the next program as well Power Control 1 Click Power Control of the main icons and the Power Control screen appears ip Multiple Display Control
5. 1 Seaechi ka the bes diva in these locators T alisi the maruileturer ard model of your kakasa devace ard then chek Hasi ll you hyve a dak that Donna the dye anu want io alal obo Hares Cink Upp the check kamang belgas bo laid or dopar tha dolguk gear whidh roheka katal patha died karna aba Tha bat dee loud ball be cidade lie gompahbla hasaan Mit Ba Pag andl Pay Hanky 2 Dont search vall choses the dreve bo ribal Choose the option ko select the devane dras homa kal Windowa does mot guarantee that ha de pou choco all ba Gh bagi match for pour hare oJ That draw tn diay iiel Click the Browse button then choose A D Driver and choose your monitor model in the model list and click the Next button Insta ii From Disk Hardware Update Wirard Galea the device diver you want bo inalali for thia hardwear neil lhe manulachuiei s malallabon dak and then make sue thal the corect dive k selected below Si blind bhi mamukhaan amd modal of pour kanais doo aed on chek Had IN po have a dk that esntaes the darai yau maa ba mahal chek Hawa Dok Madel Samsung sasa Copy manulachune s les Hom By Thie diver in rot digitally signed Lakma yea dean ran ki imocel ord Dy pes WC pet If you can see following message window then click the Continue Anyway button Then click OK button Hardware Installation The sofware you are installing for this hencevare Samsung sawa has moi pated Wanda Logo hating lo manly i c
6. program Magiclnfo may stop If you do unplug the cable restart the system Do not unplug the LAN cable used by an USB device ex video display Otherwise the program Magiclnfo may stop To access other sources press the SOURCE button in Magiclnfo The preset password for the LCD Display is 000000 The server program s Power On option works only if the LCD Display s power is com pletely shut off Adjusting the LCD Display Please make sure not to use the Power On option when the LCD Display is in the process of shutting down since this may cause system errors on the LCD Display e When using Magiclnfo with the Magiclnfo Server Program perform Network mode e When using Magiclnfo with the device directly connected to LCD Display execute Device mode e Press ESC to directly go to the Magiclnfo Window screen e To setup Magiclnfo on a Windows screen a keyboard and mouse are required e To setup Magiclnfo on a Windows screen refer to the Magiclnfo Server Help It is highly recommended not to turn off the AC power during an operation e For pivoted LCD Displays ticker transparency is not supported e For pivoted LCD Displays a screen resolution of up to 720 480 SD is supported for movies e For drive D EWF is not applied e To save Setup contents that have been changed when EWF is in the Enable state you must Commit them e By selecting Disable Enable or Commit the system is restarted Magiclinfo 1 Selec
7. to securely hold the product to the bracket A LCD Display B Wall Bracket C Wall Wall Bracket Angle Adjustment Adjust the bracket angle to 2 before installing it on the wall 2 9 5 0 2o aQ 1 Fix the product to the wall bracket 2 Hold the product at the top in the center and pull it forward direction of the arrow to adjust the angle Note You can adjust the bracket angle between 2 and 15 Introduction Make sure to use the top center and not the left or the right side of the product to adjust the angle Connections Connecting a Computer Connect the power cord for your LCD Display to the power port on the back of the LCD Display Turn on the power switch There are 3 ways to connect the D sub to your LCD Display Choose one of the following Using the D sub Analog connector on the video card e Connect the D sub to the 15 pin RGB port on the back of your LCD Display and the 15 pin D sub Port on the computer Using the DVI Digital connector on the video card e Connect the DVI Cable to the DVI port on the back of your LCD Display and the DVI port on the computer Using the BNC Analog connector on the video card e Connect the BNC Cable to the BNC COMPONENT IN R G B H V ports on the back of your LCD Display and the 15 pin D sub Port on the computer Connections Connect the audio cable for your LCD Display to the audio port on the
8. 726 7864 http www samsung com 01 800 SAMSUNG 726 7864 Latin America 0800 333 3733 0800 124 421 4004 0000 800 SAMSUNG 726 7864 01 8000112112 0 800 507 7267 1 800 10 7267 800 6225 1 800 299 0013 800 7919267 1 800 234 7267 00 1800 5077267 800 7267 0 800 777 08 1 800 682 3180 1 800 751 2676 http www samsung com http www samsung com http www samsung com http www samsung com http www samsung com http www samsung com http www samsung com http www samsung com http www samsung com http www samsung com http www samsung com http www samsung com http www samsung com http www samsung com http www samsung com http www samsung com 1 800 SAMSUNG 726 7864 http www samsung com 0 800 100 5303 Europe 42 27 5755 http www samsung com 0810 SAMSUNG 7267864 http www samsung com E 0 07 min 02 201 24 18 05 133 1999 07001 33 11 http www samsung com be Dutch http www samsung com be fr French http www samsung com CROATIA CZECH DENMARK EIRE ESTONIA FINLAND FRANCE GERMANY HUNGARY ITALIA KOSOVO LATVIA LITHUANIA LUXEMBURG MACEDONIA MONTENEGRO NETHERLANDS NORWAY POLAND PORTUGAL RUMANIA SERBIA SLOVAKIA SPAIN SWEDEN SWITZERLAND U K ARMENIA AZERBAIJAN Appendix Europe 062 SAMSUNG 062 726 http www samsung com 7864 800 SAMSUNG http www samsung com 800 726786 Samsung Zrt Ceska organizacni slo
9. Frequency quency Hz MHz H V IBM 640 x 350 31 469 31 469 70 086 59 940 25 175 25 175 Fa IBM 640 x 480 IBM 720 x 400 31 469 70 087 28 322 MAC 640 x 480 35 000 66 667 30 240 me MAC 832 x 624 49 726 74 551 57 284 J Display Mode Horizontal Vertical Fre Pixel Clock Sync Polarity Frequency quency Hz MHz H V KHz MAC 1152 x 870 68 681 75 062 100 000 VESA 640 x 480 37 861 72 809 31 500 VESA 640 x 480 37 500 75 000 31 500 VESA 800 x 600 35 156 56 250 36 000 VESA 800 x 600 37 879 60 317 40 000 VESA 800 x 600 48 077 72 188 50 000 VESA 800 x 600 46 875 75 000 49 500 VESA 848 x 480 31 020 60 000 33 750 VESA 1024 x 768 48 363 60 004 65 000 VESA 1024 x 768 56 476 70 069 75 000 VESA 1024 x 768 60 023 75 029 78 750 VESA 1152 x 864 67 500 75 000 108 000 VESA 1280 X 768 47 776 59 870 79 500 VESA 1280 X 960 60 000 60 000 108 000 VESA 1280 X 1024 63 981 60 020 108 000 VESA 1280 X 1024 79 976 75 025 135 000 VESA 1360 x 768 47 712 60 015 85 500 VESA 1600 x 1200 75 000 60 000 162 000 VESA 1920 x 1080 66 587 59 934 138 500 Specifications Horizontal Frequency The time to scan one line connecting the right edge to the left edge of the screen horizontally is called the Horizontal Cycle and the inverse number of the Hor izontal Cycle is called the Horizontal Frequency Uni
10. Modes J PC BNC DVI LJ Av HDMI M Magicinfo 4 Component Note The TV menu is available when a TV tuner box is installed DX model can use Magiclnfo menu when mounted Network box Source List a as Use to select PC DVI or other external input sources connected to the LCD Display Use to select the screen of your choice 1 2 PC DVI AV HDMI This is deactivated when a TV tuner box is installed Magicinfo Adjusting the LCD Display DX model can use Magiclnfo menu when mounted Network box 6 TV This is activated when a TV tuner box is installed 7 BNC BNC mode is not supported if the component cable is connected To use BNC mode remove the component cable and connect the BNC cable 8 Component Component mode is not supported if the BNC cable is connected To use Component mode remove the BNC cable and connect the Component cable on Note e The direct button on the remote control is the SOURCE button e For PC and DVI this is deactivated if the cable is disconnected Edit Name J bls AV Receiver Name the input device connected to the input jacks to make your input source selection easier VCR DVD Cable STB HD STB Satellite STB AV Receiver DVD Receiver Game Camcorder DVD Combo DHR PC Picture PC BNC DVI Magiclnfo Mode Available Modes e J PC BNC DVI Eav HDMI Adjusting the LCD Display M Magiclnfo 6 Component
11. Note The TV menu is available when a TV tuner box is installed DX model can use Magiclnfo menu when mounted Network box MagicBright LIN MagicBright is a feature providing the optimum viewing environment depending on the con tents of the image you are watching Currently four different modes are available Enter tain Internet Text and Custom Each mode has its own pre configured brightness value You can easily select one of the four settings by simply pressing the MagicBright control button 1 Entertain High brightness For watching motion pictures such as from a DVD or VCR Internet Medium brightness For working with a mixture of images such as texts and graphics Text Normal brightness For documents or works involving heavy text Custom Although the values are carefully chosen by our engineers the pre configured values may not be comfortable to your eyes depending on your taste If this is the case adjust the brightness and contrast by using the OSD menu Custom By using the on screen menus the contrast and brightness can be changed to your personal preference Note By adjusting the picture using the Custom function MagicBright will change to Custom mode Adjusting the LCD Display Contrast Contrast _ Ome Move 4h Aju Adjusts the Contrast Brightness Brightness Adjusts the Brightness Sharpness Sharpness C 40 Move Adjust Adjusts the Sharpness Color To
12. Remove Programs option of the Windows Control Panel Perform the following steps remove MDC Select Setting Control Panel on the Start menu and then double click Add Delete a pro gram Select MDC from the list and then click the Add Delete button F Using MDC F P ap a il EWIT Y Mali LM Lt uf m I ntroduction RS 232C OUT Paces Med a RS 232C In RS 232C In Po a a TE Pa AUTO oo SAN SUNAT s RS 232C Out RS 232C Out RS 232C Out A Multiple Display Control MDC is an application allowing various displays to be easily and simultaneously operated on a PC RS 232C a standard of serial communication is used for the communication between a PC and a display Therefore a serial cable should be connected between the serial port on a PC and the serial port on a display Main Screen Click Start gt Program gt Samsung gt MDC System to start the program Select a set to see the volume of the selected set within the slider i Multiple oO Control E Banacen J Sse tol rot Sector Power On Power Off Volume 10 Temp Status B RSenser Fan o oO Main I cons O Select Button E3 Remocon O Info Grid amp Safety Lock E8 Display Selection O Port Selection O Control Tools 1 Use the main icons to switch into each screen 2 Allows you to enable or disable the remote control signal receiving function of the display unit o
13. Setting Control Panel 2 Double click the Display icon 3 Select the Settings tab and click Advanced Properties button 4 Choose Monitor Case If the Properties button is inactive it means your monitor is properly configured Please stop installation Case2 If the Properties button is active click the Properties button then follow next steps continually 5 Click Driver and then click on Update Driver then click on the Next button 6 Choose Display a list of the known drivers for this device so that can choose a specific driver then click Next and then click Have disk 7 Click the Browse button then choose A D Driver 8 Click the Open button then click OK button 9 Choose your monitor model and click the Next button then click Next button 10 Click the Finish button then the Close button Using the Software If you can see the Digital Signature Not Found window then click the Yes button And click the Finish button then the Close button Microsoft Windows Millennium Operating System 1 Click Start Setting Control Panel 2 Double click the Display icon 3 Select the Settings tab and click Advanced Properties button 4 Select the Monitor tab 5 Click the Change button in the Monitor Type area 6 Choose Specify the location of the driver 7 Choose Display a list of all the driver in a specific location then clic
14. Size Auto Wide 16 9 Wide Zoom Zoom Zoom 1 foom 7 4 3 Screen Fit Wide Fit a r Sereen Mode 16 9 Wide Zoom foom Je Info Grid shows some basic information necessary to Image Size Control 1 Click the Video Source tab to adjust Image Size for TV AV S Video Component DVI HDCP HDMI DTV Click Select All or use Check Box to select a display to control 2 Info Grid displays only the display having TV AV S Video Component or DVI HDCP as input source 3 Switch Image Size of the selected display randomly Note Auto Wide Zoom1 and Zoom 2 are not available for selection when the input signal type for Component and DVI HDCP is 720p or 1080i The Auto Wide mode is available only for TV AV and S Video The screen modes can only be adjusted when a TV PAL only is connected and the Image Size item is set to Auto Wide k The Input source of Magicl nfo works only on Magicl nfo model k The Input source of TV works only on TV model The I mage Size Control feature is available only for the displays whose power status is ON Time 1 Click Time of the main icons and the Time Control screen appears File Remocon Safety Lock Port Selection Help SelectAll Clear All Current Time 05 23 On Time Setup Off Time 5etup Qi 1 s IHI NAH Pei Plint Ye Info Grid shows some basic information necessary to Time Control 1 Current Time Set the current time for the selec
15. This is dis played on the lower left corner of the screen The audio resumes if MUTE or VOL is pressed in the Mute mode Selects the TV and DTV mode directly Opens the on screen menu and exits from the menu or closes the adjustment menu Activates a highlighted menu item Current picture information is displayed on the upper left corner of the screen Press to add or delete channels and to store channels to the favorite channel list in the Channel List menu TV channels provide written information services via tele text Teletext Buttons 05 00 000a 08 006 90 a a da For more information gt TTX MIX Press the button once to freeze the screen Press it again to unfreeze Adjusts the screen display automatically in PC mode By changing the resolution in the control panel auto function is performed When pressing this button the current mode is displayed at the bottom centre of the screen The LCD Display has a 16 MDC 17 LOCK 18 SOURCE 19 E ENTER PRE CH 20 WCH PA 21 D MENU 22 GUIDE 23 D RETURN 24 Up Down Left Right but tons 25 Ll EXIT 26 sRS 27 Magiclnfo 28 P MODE 29 1 DUAL MTS Introduction built in high fidelity stereo amplifier Then press the button again to circle through available preconfigured modes Standard Music Movie Speech Custom MDC Quick Launch Button Activates or deactivates all function keys on both the remote control
16. and the LCD Display except for the Power and LOCK buttons Press the button to change the input signal SOURCE Changing the SOURCE is only allowed for external devices that are connected to the monitor at the time This button is used to return to the immediately previous channel In TV mode selects TV channels DTV menu display Electronic Program Guide EPG display Returns to the previous menu Moves from one menu item to another horizontally vertically or adjusts selected menu values Exits from the menu screen Selects SRS TruSurround XT mode Magiclnfo Quick Launch Button When you press this button current picture mode is dis played on the lower center of the screen AV HDMI TV P MODE The LCD Display has four automatic picture settings that are preset at the factory Then push button again to circle through available preconfigured modes Dynamic Standard Movie Custom PC DVI Magiclnfo M B MagicBright MagicBright is a feature providing the optimum viewing en vironment depending on the contents of the image you are watching Then push button again to circle through available preconfigured modes Entertain Internet Text Custom DUAL STEREO MONO DUAL DUAL Il and MONO NICAM MONO NICAM STEREO can be operated depending on the broadcasting type by using the DUAL button on the remote control while watching TV Introduction MTS You can select MTS Multicha
17. back of your computer Note e Turn on both your computer and the LCD Display Contact a local SAMSUNG Electronics Service Center to buy optional items Connecting to Other devices Note AV input devices such as DVD players VCRs or camcorders as well as your computer can be connected to the LCD Display For detailed information on connecting AV input devices refer to the contents under Adjusting Your LCD Display Connecting AV Devices Connect the audio output port on an external device such as DVD VCR or camcorder to the L AUDIO R input port on the monitor using an audio cable and connect the video output port on the external device to the AV IN VIDEO input port on the monitor 2 Then start the DVD VCR or Camcorders with a DVD disc or tape inserted 3 Select AV using the SOURCE Connecting to a Camcorder 4 Connections Locate the AV output jacks on the camcorder They are usually found on the side or back of the camcorder Connect a set of audio cables between the AUDIO OUTPUT jacks on the camcorder and the AV AUDIO IN L AUDIO R on the LCD Display Connect a video cable between the VIDEO OUTPUT jack on the camcorder and the AV IN VIDEO on the LCD Display Select AV for the Camcorder connection using the Source button on the front of the LCD Display or on the remote control Then start the Camcorders with a tape inserted Note The audio video cables shown here are usually included
18. can check this in Power Control Info Grid Check if you can change the input source of the display 3 The dialogue box appears repeatedly Check to see if the display you wish to control is selected 4 Both On Timer and Off Timer have been set but different time is showing Apply current time to synchronize the display clocks 5 The remote may not function properly when you turn off the remote Function disconnect the RS 232C cable or exit the program in an Irregular manner Rerun the program and turn the remote function again to Restore normal functions lt Note gt This program may malfunction due to problems in communication circuits or interference from electronic appliances nearby Please make selection in the example information grid before controlling MI ID mj Settings Value Display In Multiple Display Mode Je When there are more than one displays connected the settings values are displayed as follows 1 No selection Displays the Factory Default Value 2 Selected one display Fetches and displays the settings value for the selected display 3 Selected one display 1D1 and add another display 1D3 The program which was displaying the settings value of ID 1 fetches and displays the value of ID3 4 Selected all sets using Select All Returns to the Factory Default Value Copyright 2003 2009 Samsung Electronics Co Ltd All rights reserved Adjusting the LCD Display Input Available
19. com Oman 800 SAMSUNG 726 7864 http www samsung com Saudi Arabia 9200 21230 http www samsung com TURKEY 444 77 11 http www samsung com U A E 800 SAMSUNG 726 7864 http www samsung com Africa NIGERIA 0800 SAMSUNG 726 7864 http www samsung com SOUTH AFRICA 0860 SAMSUNG 726 7864 http www samsung com Dot Pitch Vertical Frequency Horizontal Frequency Interlace and Non Interlace Methods Plug amp Play Resolution The image on a monitor is composed of red green and blue dots The closer the dots the higher the resolution The dis tance between two dots of the same color is called the Dot Pitch Unit mm The screen must be redrawn several times per second in order to create and display an image for the user The fre quency of this repetition per second is called the Vertical Frequency or Refresh Rate Unit Hz Example If the same light repeats itself 60 times per sec ond this is regarded as 60 Hz The time to scan one line connecting the right edge to the left edge of the screen horizontally is called the Horizontal Cycle The inverse number of the Horizontal Cycle is called Horizontal Frequency Unit kHz Showing the horizontal lines of the screen from the top to the bottom sequentially is called the Non Interlace method while showing odd lines and then even lines in turn is called the Interlace method The Non Interlace method is used for the majority of monitors to ensure a clear image
20. e Input devices such as digital DVD are connected to the HDMI terminal of the LCD Display using the HDMI cable e You cannot connect a PC to the HDMI terminal Connections Connecting Using a DVI to HDMI Cable Note e Connect the DVI output terminal of a digital output device to the HDMI terminal of the LCD Display using a DVI to HDMI cable e Connect the red and white jacks of an RCA to stereo for PC cable to the same colored audio output terminals of the digital output device and connect the opposite jack to the DVI PC HDMI AUDIO IN terminal of the LCD Display Connecting to an Audio System AUX Note e Connect a set of audio cables between the AUX L R jacks on the AUDIO SYSTEM and AUDIO OUT L AUDIO R on LCD Display Connections Connecting a LAN Cable EITITE il il al il LIL LI s Connect the LAN cable Note Applicable to the DXn model only Connecting a USB device You can connect USB devices such as a mouse or keyboard Note Applicable to the DXn model only Using the Software Monitor Driver Note When prompted by the operating system for the monitor driver insert the CD ROM included with this monitor Driver installation is slightly different from one operating system to another Follow the directions appropriate for the oper ating system you have Prepare a blank disk and download the driver program file at the Internet web si
21. ka Oasis Florenc 5Sokolovska394117 180 00 Praha 8 70 70 19 70 http www samsung com 0818 717100 http www samsung com 800 7267 http www samsung com 030 6227 515 01 48 63 00 00 01805 SAMSUNG http www samsung com 726 7864 E 0 14 Min 06 80 SAMSUNG 726 7864 http www samsung com 800 SAMSUNG 726 7864 http www samsung com 381 0113216899 http www samsung com http www samsung com 8000 7267 http www samsung com 8 800 77777 http www samsung com 261 03 710 http www samsung com 023 207 777 020 405 888 0900 SAMSUNG 0900 7267864 0 10 Min 815 56 480 http www samsung com 0 801 1SAMSUNG 172678 http www samsung com http www samsung com 022 607 93 33 80820 7267864 1 08010 SAMSUNG 72678 doar din reteaua http www samsung com Romtelecom tarif local 2 021 206 01 10 din orice retea tarif normal SAMSUNG http www samsung com 0700 SAMSUNG 0700 726 http www samsung com 7864 0800 SAMSUNG 726 7864 http www samsung com 902 1 SAMSUNG 902 172 http www samsung com 678 0771 726 7864 SAMSUNG http www samsung com 0848 SAMSUNG 7267864 http www samsung com ch CHF 0 08 min http www samsung com ch fr French 0330 SAMSUNG 7267864 http www samsung com CIS 0 800 05 555 088 55 55 555 BELARUS GEORGIA KAZAKHSTAN KYRGYZSTAN MOLDOVA RUSSIA TADJIKISTAN UKRAINE UZBEKISTAN AUSTRALIA NEW ZEALAND CHINA
22. of children and to the product e Your children may hang onto the product causing it to fall and this may result in personal injury or death L Be careful that children do not place the battery in their mouths when removed from the remote control Place the battery in a lo cation that children or infants cannot reach e f children have had the battery in their mouths consult your doctor immediately L When replacing the battery insert it with right polarity e Otherwise the battery may become damaged or it may cause fire personal injury or damage due to leakage of the internal liquid J Use only the specified standardized batteries and do not use a new battery and a used battery at the same time e Otherwise the batteries may be damaged or cause fire per sonal injury or damage due to a leakage of the internal liquid Safety Instructions J The batteries and rechargeable batteries are not ordinary re fuse and must be returned for recycling purposes The customer is responsible for returning the used or rechargeable batteries for recycling e The customer can return used or rechargeable batteries to a nearby public recycling center or to a store selling the same type of the battery or rechargeable battery J Do not place the product in a location exposed to direct sunlight or near any heat such as a fire or heater e This may reduce the lifetime of the product and may result in fire L Do
23. to set up this feature PowerSaver When used as a Network monitor State Power sav Power off Power off Normal Oper Power Indicator Power 520DXn ation On 310 W ing mode Blinking Power but ton On Power switch Off Less than5 W Less than 5 W Less than OW Consump tion PowerSaver When used as a normal monitor State Power sav Power off Power off Normal Oper ation On ing mode Power but ton On Power switch Off Power Indicator Power 520DX 260 W Blinking Less than2 W Less than 1 W Less than OW Consump tion Note e The actual power consumption may be different from the indicated power consumption above if the system conditions or settings are changed e To stop any power consumption turn off the switch or disconnect the power cable on the back Be sure to disconnect the power if you intend to stay away from home for many hours e f you connect a network box sold separately the LFD will no longer be in compliance with Energy Star 5 0 Preset Timing Modes If the signal transferred from the computer is the same as the following Preset Timing Modes the screen will be adjusted automatically However if the signal differs the screen may go blank while the power LED is on Refer to the video card manual and adjusts the screen as follows Horizontal Vertical Fre Pixel Clock Sync Polarity Display Mode kHz
24. Contrast automatically detects the distribution of the visual signal and adjusts to create an optimum contrast 1 Off 2 On Adjusting the LCD Display Brightness Sensor Li Brightness Sensor detects the ambient light intensity so that the picture brightness can automatically be adjusted 1 Off 2 On Sound Available Modes e JPC BNC DVI gt Elav HDMI 7 Magicinfo 5 Component nan Note e The TV menu is available when a TV tuner box is installed e DX model can use Magiclnfo menu when mounted Network box Mode az Ls The LCD Display has a built in high fidelity stereo amplifier 1 Standard Selects Standard for the standard factory settings 2 Music Selects Music when watching music videos or concerts 3 Movie Selects Movie when viewing movies 4 Speech Adjusting the LCD Display Selects Speech when watching a show that is mostly dialogue i e news 5 Custom Selects Custom if you want to adjust the settings according to your personal preferen ces Custom fe The sound settings can be adjusted to suit your personal preferences FEZ Note e You can hear the sound even when sound value is set to 0 e If you adjust sound using Custom function Mode will turn to Custom mode Bass Treble Emphasizes high frequency audio Balance Balance Allows you to Adjusts the sound balance between the left and right speakers Auto Volume ba K
25. Display installation will proceed automatically unless the user wishes to select alternate settings Dot Acceptable TFT LCD panels manufactured by using advanced semiconductor technology with precision of 1ppm one millionth above are used for this product But the pixels of RED GREEN BLUE and WHITE color appear to be bright sometimes or some black pixels may be seen This is not from bad quality and you can use it without any problems For example the number of TFT LCD sub pixels contained in this product are 6 220 800 Ha Note Design and specifications are subject to change without prior notice pra class B Information Communication equipment for residential use This device is registered for EMC requirements for home use Class B It can be used in all areas Class B equipment emits less electromagnetic waves than Class A equipment PowerSaver This LCD Display has a built in power management system called PowerSaver This system saves energy by switching your LCD Display to low power mode when it has not been used Specifications for a certain amount of time The LCD Display automatically returns to normal operation when you press a key on the keyboard For energy conservation turn your LCD Display OFF when it is not needed or when leaving it unattended for long periods The PowerSaver system operates with a VESA DPM compliant video card installed in your computer Use the software utility installed on your computer
26. Ghanehard maria iypes Pigre Kabag Locaia on 30 Pioghrst ornen iruerh rata 60 Hans A Devige Hius Thes daa in sara be ieee pinperk C Hide meat Iha this merece carret daplay feoblems sah the diaca chok T mubisahod la Chang thie check boa ath pou lo paketi dapday deiei that Bhia I pou aro hang mn Cannot ipis Con eotke This may lead bo an ununabie cheplay haat tha Mowblaa hooo sinat damaged harian Davics urap ira thei dara anaia O Flip and Flay Monitor Pio jpu rihi e si Durer i nanan Welcome to the Hardware Update ed Pha ara Play biondo ol i wizard Divas Provid Mic r Tiia varad haka pou instal aolvaace bor Dires Date AO Pies and Play Moreton Dives Wes mor ES 12001 0 Digtal Tignan Microw fide HI Pubinihar IP pour heedeaee came milh an mvetelilation CO or floppy dick ineot it now To wees aia allel Wee ies Noa ddm Ty u m Diega To gala Aha kena ika hi baa a What o pou waned thee aed Io Bo Eh reial the polvea puio Recommended W the device lala altar updating he dive rol init al o pecie beaien vanced Lpa kad Teo all theo root Adhere ed ket Het to continue ta ea Carca 6 Select Don t search will then click Next and then click Have disk 9 Using the Software Hardware Update Wizard hardware Update Wizard Fies chora pug poarch and indlallaban options Cu Pr Taksi the devine diver pou want bo bhatal boa this hardware
27. HONG KONG INDIA INDONESIA JAPAN MALAYSIA PHILIPPINES SINGAPORE TAIWAN THAILAND Appendix CIS 810 800 500 55 500 8 800 555 555 8 10 800 500 55 500 GSM http www samsung com 7799 00 800 500 55 500 00 800 500 55 500 8 800 555 55 55 8 10 800 500 55 500 0 800 502 000 8 10 800 500 55 500 Asia Pacific 1300 362 603 http www samsung com http www samsung com http www samsung com http www samsung com ua http www samsung com ua ru http www samsung com http www samsung com 0800 SAMSUNG 0800 726 http www samsung com 786 400 810 5858 010 6475 1880 852 3698 4698 3030 8282 1800 110011 1800 3000 8282 1800 266 8282 0800 112 8888 021 5699 7777 0120 327 527 1800 88 9999 1 800 10 SAMSUNG 726 7864 1 800 3 SAMSUNG 726 7864 1 800 8 SAMSUNG 726 7864 02 5805777 http www samsung com http www samsung com hk http www samsung com hk en http www samsung com http www samsung com http www samsung com http www samsung com http www samsung com 1800 SAMSUNG 726 7864 http www samsung com 0800 329 999 1800 29 3232 http www samsung com http www samsung com Terms Appendix Asia Pacific 02 689 3232 VIETNAM 1 800 588 889 http www samsung com Middle East BAHRAIN 8000 4726 http www samsung com Egypt 08000 726786 http www samsung com JORDAN 800 22273 http www samsung com Morocco 080 100 2255 http www samsung
28. O IN L AUDIO R LCD Display Audio Connection Terminal Input AUDIO OUT L AUDIO R LCD Display Audio Connection Terminal Output BNC COMPONENT OUTIR Pp G Y B Pp H V BNC Component Connection Terminal Output BNC Analog PC Connection connecting the R G B H V ports Component Connection connecting the Pr Y Pg ports BNC COMPONENT IN R Pp G Y B Pp H V Introduction BNC Component Connection Terminal In put PC OUT Applicable to the DXn model only LAN LAN Connection Terminal Applicable to the DXn model only USB USB Connection Terminal Keyboard Mouse Mass Storage Device Compatible Applicable to the DXn model only Kensington Lock slot A Kensington Lock is an anti theft device that enables users to lock the product so that they can safely use it in public locations Since the shape and usage of the locking device may differ depending on the model and the man ufacturer for more information refer to the User Manual supplied with the locking device for more information Note You must purchase the Kensington Lock separately To lock the product follow these steps 1 Wrap the Kensington lock cable around a large stationary object such as a desk or chair 2 Slide the end of the cable with the lock attached through the looped end of the Kensington lock cable 3 Insert the Kensington Lock into the se curity s
29. Reset function is not available when Video Wall is On Color Reset CJ CUTA Color Reset Lamp Control LAX TTS Lamp Control 100 Adjusts the inverter lamp in order to reduce energy consumption Note This function does not operate when Dynamic Contrast is set to On in PC DVI AV HDMI TV modes Multi Control Available Modes e JPC BNC DVI AV C HDMI i 7 Magicinfo Component Note The TV menu is available when a TV tuner box is installed DX model can use Magiclnfo menu when mounted Network box Multi Control ba ii Ke Assigns an individual ID to the SET MagiclInfo Adjusting the LCD Display ID Setu ID Setup Assigns distinctive IDs to the SET ID Input Use to select the transmitter functions of the individual SET Only a SET where the ID corresponds to the transmitter setting becomes activated Available Modes J PC BNC DVI EJ AV CC HDMI M Magicinfo 4 Component Note The TV menu is available when a TV tuner box is installed DX model can use Magiclnfo menu when mounted Network box Note The remote control can be used to select Magiclnfo However it is recommended to use a separate USB keyboard to utilize Magiclnfo fully For Magiclnfo in Device mode moving external devices while booting may cause errors Set up external devices only if the LCD Display turns on Do not unplug the LAN cable used for the network ex video display Otherwise the
30. SAMSUNG is not responsible for any product damage or any injury caused by installation at customer s discretion Introduction Dimensions 800 0 SAMSUNG 545 0 679 0 A Notice For securing the bracket on a wall use only machine screws of 6 mm diameter and 8 to 12 mm length Wall Bracket Installation e Contact a technician for installing the wall bracket e SAMSUNG Electronics is not responsible for any damages to the product or harm to customers when the installation is done by the customer e This product is for installing on cement walls The product may not stay in place when installed on plaster or wood Components Only use the components and accessories shipped with the product j Nas Ra 3 i ai Wi Wall Bracket 1 Hinge Left 1 Right Plastic Screw Screw Anchor 1 Hanger A 11 B 4 11 4 Wall Bracket Assembly Note There are two hinges left and right Use the correct one 1 Introduction Insert and tighten the Captive Screw in the direction of the arrow When done mount the wall bracket on the wall x pa mi AL pe i Ha N la Te a i LG i al J aa it te o i ole ll kx he L Il HI ff There are two hinges left and right Use the correct one A Captive Screw B Wall Bracket C Hinge Left D Hinge Right Before drilling into the wall check if the length between the two locking holes at the back o
31. The Inter lace method is the same as that used in TVs This is a function that provides the best quality screen for the user by allowing the computer and the monitor to ex change information automatically This monitor follows the international standard VESA DDC for the Plug amp Play func tion The number of horizontal and vertical dots used to compose the screen image is called the resolution This number shows the accuracy of the display A high resolution is good Appendix for performing multiple tasks as more image information can be shown on the screen Example If the resolution is 1920 x 1080 this means the screen is composed of 1920 horizontal dots horizontal res olution and 1080 vertical lines vertical resolution SRS TS XT This feature outputs sonorous and vivid 3D sound as for 5 1 channel speaker sound but through a 2 channel speaker It has a good effect when stereo signals are input Correct Disposal Correct Disposal of This Product Waste Electrical amp Electronic Equipment Europe only Applicable in the European Union and other European countries with separate collection systems This marking on the product accessories or literature indicates that the product and its electronic accessories e g charger headset USB cable should not be disposed of with other household waste at the end of their working life To prevent possible harm to the environment or human health from uncontrolled waste
32. The sound level is too low Check the volume level If the volume is still too low after turning the control to its maximum check the volume control on the computer sound card or software program The sound is too high or too low Adjusts the Treble and Bass to the appropriate levels Problems related to the Remote Control Note Problems related to the remote control and their solutions are listed Q A The remote control buttons do not respond Check the polarities of the batteries Check if the batteries are empty Check if the power is on Q amp A Troubleshooting Check if the power cord is securely connected Check if a special fluorescent or neon lamp is on in the vicinity How can I change the frequency The frequency can be changed by reconfiguring the video card Note That video card support can vary depending on the version of the driver used Refer to the computer or the video card manual for details How can Adjusts the resolution Windows XP Set the resolution in the Control Panel Appearance and Themes Display Set tings Windows ME 2000 Set the resolution in the Control Panel Display Settings Contact the video card manufacturer for details How can set the Power Saving function Windows XP Set the resolution in the Control Panel Appearance and Themes Display Screen Saver Set the function in the BIOS SETUP of the computer Refer to t
33. This allows the screen to be moved finely at the specified time interval 3 Safety Screen The Safety Screen function is used to prevent afterimages from occurring when a still screen is displayed on the monitor for a long time The Interval item is used to set the repetition cycle in hour units and the Time item is used to set the time when the Safety Screen function must be performed The Type item can be set to Scroll Pixel Bar Eraser All White or Pattern 4 Safety Screen2 This function is used to prevent afterimages from occurring There are five 5 types that you can select and control with this function For the Scroll type the Time item can be set to 1 2 3 4 or 5 For the Bar and Eraser types it can be set to 10 20 30 40 or 50 For the All White and Pattern type it can be set to 1 5 10 20 or 30 The Input source of Magicl nfo works only on Magici nfo model The Input source of TV works only on TV model The Maintenance Control feature is available only for the displays whose power status is ON gh Maintenance Ww Video Wall 1 Click on the Maintenance icon in the Main Icon column to display the Maintenance screen Remocon Safety Lock Port Selection Help Select A Clear Alt Video Wall Video Wall ON OFF ot o forizcnt ad Werical O Format Natural 1 Video Wall A Video Wall is a set of video screens that are connected together so that each screen shows a part of t
34. a eh oe nar tae Grove for drer poeta On eet eee ee GP bon ee By Fan teenth gute kat updated deer patie p Adige mil wae Bye pee m ee eed Na Ea Lard hon eee ee F 7 peel naisin APA i ee NA ee Lat mag pet bom a lg of der Shen on agang 5p a kas kd ad Paa oe iar fha oped AG Oe bran r aed ldr eee er egy ee ee Click Have Disk and select the folder for example D Drive where the driver setup file is located and click OK Using the Software Saplect the haah Inn yte eel la lad Peer bhig hatha heaton kanina Na Png in a na Paan a Pars a Pma Pina Bara oh fa a Pep ee re a a hh ra a Mapa a Cara Pi bhri I Ta EG EE TEA 9 Select the model that matches your monitor from the list of monitor models on the screen and click Next Sekei the dador driver you ward io nabali few thia hardware A Tasa Pa ar tector eed ket pa mien denne feed her chem Poe a pM Ee De O Hare Dasha A Karaang sna NG darwin paa a rira on Window haa sutea updated your dher salwe a Kampana ena By Sarang ee DeD O pa Dim d i o a ma oy Deyan Detain Ta v baai aaa ph eae Tiaa Ti pink Pak ere aaa ka a a i he a Laia ier i Pak r a DECE p TE per a PA Ti aala Pa dee Liria EE FR i A Geherce SEN LE i iia ii il NG ANG KA BP hale A onor Type UO Drag the icons bo match your montari Miamia Pating Drean refresh naba 89 Hertz if Wide modes that the monitor cannot display Cheering thas c
35. able between the computer and the LCD Display is securely con nected Refer to Connecting a Computer Problems related to the Screen Note Problems related to the LCD Display screen and their solutions are listed Q A pag gt O 5 F O gt O F 5 DO O The screen is blank and the power indicator is off Ensure that the power cord is firmly connected and the LCD Display is on Refer to the Connecting a Computer Check Signal Cable message Ensure that the signal cable is firmly connected to the PC or video sources Refer to the Connecting a Computer Ensure that the PC or video sources are turned on Not Optimum Mode message Check the maximum resolution and the frequency of the video Adaptor Compare these values with the data in the Preset Timing Modes Chart The picture rolls vertically Check if the signal cable is securely connected Re connect it if necessary Refer to Connecting a Computer The image is not clear picture is blurred Run Frequency Coarse and Fine tuning Turn on again after removing all accessories video extension cable etc Set the resolution and frequency to the recommended ranges The picture image is unstable and shakes Check if the resolution and frequency set for the computer video card falls in the range supported by the LCD Display If not reset them referring to the current Information under the LCD Display menu and Preset Timing Modes Ghost images are sho
36. ak moe f MONG LT efter LU E LUTI The LCD Display has four automatic picture settings Dynamic Standard Movie and Custom that are preset at the factory Dynamic Standard Movie or Custom can be activated 1 Dynamic 2 Standard 3 Movie 4 Custom nat Note e Not available when Dynamic Contrast is set to On e The direct button on the remote control is the P MODE button Custom By using the on screen menus the contrast and brightness can be changed to your personal preference Note Not available when Dynamic Contrast is set to On Contrast Contrast Adjusts the Contrast Adjusting the LCD Display Brightness Brightness Adjusts the Brightness Sharpness Pi sharpness Adjusts the picture Sharpness Color Adjusts the picture Color Tint Adds a natural tone to the display Note Tint function can be available just in NTSC system Color Tone E Cool aaa ff Nami Move Enter Return The color tones can be changed The individual Color components are also user adjustable 1 Off 2 Cool2 3 Coolt 4 Normal 5 Warm1 6 Warm2 Adjusting the LCD Display Note e Not available when Dynamic Contrast is set to On e If you set the Color Tone to Cool2 Cool1 Normal Warm1 or Warm2 the Color Temp function is disabled Color Temp LJ Color Temp Co S000 Color Temp is a measure of the warmth of the image colors Not
37. appears Click Select All or use Check Box to select a display to control TV Mode m Bi i a pa rs San Kara KAYE ae f 010 ga p ME Multiple Display Control SE EE la Fie Remocon Safety Lock Port Selection Help PA El z F le 3 BO Choose Input Source PC AV S Video Componen i mo a mi il Upi EM MM DM eee Mp PC Mode iole Dismay Control ee a File Remocon Safety Lock Port Selection Help SAMSUNG DATT a 5 3 Image Size ma UDONG fh fe oe ws Ye Info Grid shows some basic information necessary to Input Source Control 1 PC Changes the Input Source of the selected display to PC 2 BNC Changes the Input Source of the selected display to BNC 3 DVI Changes the Input Source of the selected display to DVI 4 TV Changes the Input Source of the selected display to TV 5 DTV Changes the Input Source of the selected display to DTV 6 AV Changes the Input Source of the selected display to AV 7 S Video Changes the Input Source of the selected display to S Video 8 Component Changes the Input Source of the selected display to Component 9 Magicl nfo The Input source of Magiclnfo works only on Magicl nfo model 10 HDMI Changes the Input Source of the selected display to HDMI 11 Channel Channel arrow appears when the Input Source is TV 3k TV Source can be selected only in products with TV and controlling channels is allow
38. ay Adjusts the screen location vertically Auto Adjustment Ll Auto Adjustment 30 The values of Fine Coarse Position are adjusted automatically By changing the resolution in the control panel the auto function is performed Available in PC mode only NG Note The direct button on the remote control is the AUTO button Signal Balance Li This is used to make up for the weak RGB signal transmitted by a long signal cable Available in PC mode only Signal Balance Move Enter O Retur Selects either On or Off with the signal control Signal Control 1 R Gain G Gain B Gain R Offset G Offset Adjusting the LCD Display 6 B Offset Size 2 The Size can be switched 1 16 9 2 4 3 Dynamic Contrast LIT Dynamic Contrast automatically detects the distribution of the visual signal and adjusts to create an optimum contrast 1 Off 2 On Brightness Sensor Li Brightness Sensor detects the ambient light intensity so that the picture brightness can automatically be adjusted 1 Off 2 On Picture AV HDMI TV Component Mode Available Modes JPC BNC DVI Adjusting the LCD Display e Elav C HDMI M Magicinfo 5 Component Note e The TV menu is available when a TV tuner box is installed e DX model can use Magiclnfo menu when mounted Network box Mode E wnamig standard Movie Custom i ae wae
39. ce type of the Main Screen The Input source of Magicl nfo works only on Magicl nfo model The PIP Control feature is available only for the displays whose power status is ON and the PI P function is set to ON Picture 1 Click Settings of the main icons and the Settings Control screen appears Safety Lock Port Selection Help Select Ar Cara Bb Busy Picture a MW AV S Video Component HOMI DT Contrast bf 7 aaa a Ma a Brightness he Sharpness pa bill Timi Color Tone Color Temp 10000K Brightness Sensor 10 Dynamic Contrast Info Grid shows some basic information necessary to Settings Control When each function is selected the set value of the selected function is displayed in the slide When selected each function fetches the value for the set and displays it on the slide bar When Select All is chosen the default value is displayed Changing a value in this screen will automatically change the mode to CUSTOM 1 Picture Available only for TV AV S Video Component HDMI DTV 2 Contrast Adjusts Contrast of the selected display 3 Brightness Adjusts Brightness of the selected display 4 Sharpness Adjusts Sharpness of the selected display 5 Color Adjusts Color of the selected display 6 Tint Adjusts Tint of the selected display Available only for NT 7 Color Tone Adjusts the Color Tone for the selec
40. cedure check your video controller and computer system your LCD Display is functioning properly Warning Messages You can even view the screen at a resolution of 1920 x 1080 However you will receive the following message for a minute You can choose to change the screen resolution or stay in the current mode during that time And if the resolution is more than 85Hz you will see the black screen because the LCD Display does not support over 85Hz Not Optimum Mode Recommended Mode 1920 x 1080 60Hz Note Refer to Specifications gt Preset Timing Modes for the resolutions or frequencies supported by the LCD Display Maintenance and Cleaning 1 Maintaining the LCD Display Case Clean with a soft cloth after disconnecting the power cord Troubleshooting ex Do not use benzene thinner or other flammable sub stances or a wet cloth 2 Maintaining the Flat Panel Display Screen Clean with a soft cloth cotton flannel smoothly e Never use acetone benzene or thinner sp They may cause flaws or deformation of the screen bi surface e The user will be required to pay costs and related expenses for repairing damages caused Symptoms and Recommended Actions Note A LCD Display recreates visual signals received from the computer Therefore if there is a problem with the computer or the video card this can cause the LCD Display to become blank have poor coloring become noisy and video mode not supported e
41. color or a moving image is recommended o Change the Color Information periodically T 1 Il PS 2 FLIGHT FLIGHT 02348 02348 UA102 UA102 F NG Note Use Two different colors Rotate the Color Information with 2 different colors every 30 minutes Information e Avoid using a combination of characters and background color with large dif ference in luminance Avoid using Grey colors which can cause Image retention easily Avoid Colors with big difference in luminance Black amp White Grey pasas 20 9 oe o Change the characters color periodically e Use Bright colors with little difference in luminance Cycle Change the characters color and background color every 30 minutes FLIGHT TIME FLIGHT TIME FLIGHT TIME O2348 20 30 e Every 30 minutes change the characters with movement FLIGHT TIME l FLIGHT TIME 0348 20 30 49 F O2348 20 30 Stepi 3 Step3 e All area display Moving image together with Logo periodically Cycle Display moving image together with Logo for 60 seconds after 4 hours in use e The best way to protect your monitor from Image retention is to turn Power off or set your PC or System to operate a Screen Saver program when you are not using it Also Warranty service will be limited based on instruction guide a Apply the Screen Scroll function on Product e Apply the Screen Scroll function Symptom Horizontal Bar with Black Color move u
42. disposal please separate these items from other types of waste and recycle them responsibly to promote the sustainable reuse of material resources Household users should contact either the retailer where they purchased this product or their local government office for details of where and how they can take these items for environmentally safe recycling Business users should contact their supplier and check the terms and conditions of the purchase contract This product and its electronic ac cessories should not be mixed with other commercial wastes for disposal Correct disposal of batteries in this product Europe only Applicable in the European Union and other European countries with X separate battery return systems k This marking on the battery manual or packaging indicates that the bat teries in this product should not be disposed of with other household waste at the end of their working life Where marked the chemical sym bols Hg Cd or Pb indicate that the battery contains mercury cadmium or lead above the reference levels in EC Directive 2006 66 If batteries are not properly disposed of these substances can cause harm to human health or the environment To protect natural resources and to promote material reuse please sep arate batteries from other types of waste and recycle them through your local free battery return system Note The rechargeable battery incorporated in this product is not user replaceable F
43. e Reduces the difference in volume control between broadcasters 1 Off 2 On Adjusting the LCD Display SRS TS XT LAY TE SRS TS XT is a patented SRS technology that solves the problem of playing 5 1 multichannel content over two speakers TruSurround delivers a compelling virtual surround sound ex perience through any two speaker playback system including internal television speakers It is fully compatible with all multichannel formats 1 Off 2 On a Note The direct button on the remote control is the SRS button Setup Available Modes e DJPC BNC DVI e Eav gt HDMI M Magicinfo 5 Component Note e The TV menu is available when a TV tuner box is installed e DX model can use Magiclnfo menu when mounted Network box Language ba Iui Francais Italiano You can choose one of 11 languages Adjusting the LCD Display English Deutsch Espa ol Fran ais Italiano Svenska PYCCKHH Portugu s Fa A 8 8120 Note The language chosen affects only the language of the OSD It has no effect on any software running on the computer Time US Selects from one of 4 time settings Clock Set Sleep Timer On Timer and Off Timer Clock Set Minute am fm Current Time Setting Sleep Timer Turns the LCD Display off automatically at certain times 1 Off 2 30 3 60 4 90 5 120 6 150 7 180 Adjusting the LCD Display On Timer Hour Minute a
44. e e Not available when Dynamic Contrast is set to On e This function is only enabled if the Color Tone is set to Off Size LEIS 16 9 00711 Zoom2 4 3 Just Scan The Size can be switched 1 16 9 Sets the picture to 16 9 wide mode 2 Zoom 1 Magnifies the size of the picture on the screen 3 Zoom 2 Magnifies the size of the picture more than Zoom 1 4 4 3 Sets the picture to 4 3 normal mode 5 Just Scan Displays the input scenes as they are without any cutoff when HDMI 720p 1080i 1080p signals are input Note e Certain external devices may feed the display an out of spec signal that may cause cutoff even when using the Just Scan feature e ZOOM1 ZOOM2 will be unavailabel in HDMI mode e The Position and Reset functions are available when ZOOM1 or ZOOM is run e Not available when Dynamic Contrast is set to On Adjusting the LCD Display Digital NR Digital Noise Reduction LEIS Move Enter Return Turns the Digital Noise Reduction feature Off On The Digital Noise Reduction feature allows you to enjoy clearer and crisper images 1 Off 2 On Film Mode LIA Move Enter Return The Film Mode feature offers you a theater quality viewing experience In HDMI mode this function can be available when the input signal is interlaced scan it cannot be available with progressive scan signal 1 Off 2 On Dynamic Contrast L Move Enter Return Dynamic
45. ed only when Input Source is TV The Input Source Control feature is available only for the displays whose power status is ON EG I mage Size PC BNC DVI 1 Click Image Size of the main icons and the Image Size control screen appears ie Multiple Display Control File Remocon Safety Lock Port Selection Help Select Alt Clear Al PC Source PC BNC DWI 16 9 4 3 Ye Info Grid shows some basic information necessary to Image Size Control 1 Power Status Shows the power status of the current display 2 Image Size Shows the current Image Size of the display in use 3 Input Info Grid displays only the displays whose Input Source is PC BNC DVI 4 PC Source When you click Image Size the PC Source tab first appear The Image Size Control button controls Image Size available for PC BNC DVI 5 Video Source Click the Video Source tab to control Image Size for respective Input Source The Input source of Magicl nfo works only on Magicl nfo model The Input source of TV works only on TV model k Image Size Control is available only for the displays for which power status is ON KO I mage Size TV AV S Video Component DVI HDCP HDMI DTV 1 Click Image Size of the main icons and the Image Size control screen appears fim Mubtiote Display Control File Remocon Safety Lock Port Selection Help Select A Clear Alt Video Source TV AV 5 Video Component HOMIL OTY Image
46. en for a long time Bar PixelShift O O O o o o Cim C Eraser This function prevents after images on the screen by moving long black and white vertical lines Eraser Pixel Shift Timer This function prevents after images on the screen by moving a rectangular pattern Resolution Select 2 1280 x 768 1360 x 768 When the picture is not displayed properly on the screen when setting the graphics card resolution of the computer to 1024 x 768 60Hz 1280 x 768 60Hz 1360 x 768 60Hz Adjusting the LCD Display or 1366 x 768 60HZz by using this function Resolution Select you can have the picture displayed on the screen in the specified resolution Note Available in PC mode only 1 Off 2 1024 X 768 3 1280 X 768 4 1360 x 768 5 1366 X 768 Note Selecting the menu is only allowed when the graphics resolution is set to 1024 x 768 60Hz 1280 x 768 60Hz 1360 x 768 60Hz or 1366 x 768 60Hz Power On Adjustment Adjusts the Power On time for the screen Caution Set the Power On time to be longer to avoid overvoltage Side Gray LAY MIS Select the brightness of the grey for the screen background 1 Off 2 Light 3 Dark Adjusting the LCD Display Reset Reverts the product settings to factory defaults The Reset function is only available when PC DVI is being used Image Reset Li Image Reset bd Note e Available in PC mode only e The
47. f the product is correct If the length is too short or long loosen all or some of the 4screws on the wall bracket to adjust the length h s A Length between the two locking holes Check the installation diagram and mark the drill points on the wall Use the 5 0 mm bit to drill holes deeper than 35 mm Fix each anchor in the corresponding hole Match each of the brackets and hinge holes to the corresponding anchor holes and insert and tighten the 11 screws A Introduction To mount the product on the wall bracket The shape of the product may vary depending on the model The assemblies of the plastic hanger and the screw are the same 1 Remove the 4 screws on the back of the product 2 Insert the screw B into the plastic hanger H OF A Notice e Mount the product on the wall bracket and make sure it is properly fixed to the left and right plastic hangers e Be careful when installing the product on the bracket as fingers can be caught in the holes e Make sure the wall bracket is securely fixed to the wall or the product may not stay in place after installation 3 Tighten the 4 screws in step 2 plastic hanger screw B to the rear holes of the product Introduction 4 Remove safety pin 3 and insert the 4 product holders into the corresponding bracket holes 1 Then place the product 2 so that it is firmly fixed to the bracket Make sure to re insert and tighten the safety pin 3
48. he Auto Adjustment Image Lock and Size functions are not available Video Wall does not operate in Magiclnfo mode Adjusting the LCD Display Video Wall Move Enter O Retum Turns Off On the Video Wall function of the selected display Off On 1 Off 2 On Format Natural _ Move CP Enter Return The Format can be selected to see a divided screen 1 Full Provides a full screen without any margins 2 Natural Displays a natural image with the original aspect ratio intact Horizontal Moe Enter OD Retum Sets how many parts the screen should be divided horizontally Five adjustment levels 1 2 3 4 and 5 Adjusting the LCD Display Vertical Sets how many parts the screen should be divided vertically Five adjustment levels 1 2 3 4 and 5 Screen Divider The screen can be divided into several images A number of screens can be selected with a different layout when dividing e Select a mode in Screen Divider e Select a display in Display Selection e The selection will be set up by pressing a number in the selected mode Safety Screen The Safety Screen function is used to prevent afterimages that may appear when a still picture is displayed on the screen over a long time e The Safety Screen function scrolls the screen for the specified period of time e This function is not available when the power is turned off Pixel Shift Pixel Shif
49. he Windows Computer Manual Windows ME 2000 Set the resolution at the Control Panel Display Screen Saver Set the function in the BIOS SETUP of the computer Refer to the Windows Computer Manual How can clean the outer case LCD Panel Disconnect the power cord and then clean the LCD Display with a soft cloth using either a cleaning solution or plain water Do not leave any detergent or scratches on the case Do not let any water enter the LCD Display How can play the video The video supports the MPEG1 and WMV codecs only Install the corresponding codec to play the video Note that some of the codecs can be incompatible Troubleshooting Note Before calling for assistance check the information in this section to see if you can remedy any problems yourself If you do need assistance please call the phone number on the In formation section or contact your dealer Specifications General General Model Name SyncMaster 520DX N LCD Panel Size 52 inches 132 cm Display area 1152 0 mm H X 648 0 mm V Pixel Pitch 0 6 mm H X 0 6 mm V Synchronization Horizontal 30 81 kHz Vertical 56 85 Hz Display Color 16 7 M Resolution Optimum resolution 1920 x 1080 60 Hz RB Maximum resolution 1920 x 1080 60 Hz RB Input Signal Terminated RGB Analog DVI Digital Visual Interface Compliant Digital RGB 0 7 Vp p 5 Separate H V sync Composite SOG TTL level V high 2 0 V V
50. he whole picture or so that the same picture is repeated on each screen 2 Video Wall Screen divider The screen can be divided into You can select a number of screens with a different layout when dividing Select a mode from Screen divider Select a display from Display Selection The place will be set up by pressing a number in the selected mode The MDC program supplied by Samsung supports up to 5x5 LCD Displayes 3 On Off Turns on off the Video Wall function of the selected display 4 Format The format can be selected to see a divided screen e Natural You may not operate this function in Magicl nfo The Input source of TV works only on TV model The Maintenance Control function is available only for the displays where the power status is ON Troubleshooting m The display you wish to control does not appear on the Power Control Info Grid Check the connection of RS232C Check if it is properly connected to the Com1 port Check the displays to see if any of the other displays connected have the same ID If more than one displays have the same ID those displays are not properly detected by the program due to data conflict Check if the Display Set ID is a number between 0 and 25 Adjust using the Display menu Note A Display Set ID must be a value between 0 and 25 2 The display you wish to control does not appear on the other Control Info Grids Check to see if the display power is ON You
51. heck box aga you in KO daplay modes thai the imonitor Gant display correctly The may lead bo on unusable i This is my mHE moaakor J tend the desktop onto tha moraor Microsoft Windows XP Operating System Using the Software 1 Insert CD into the CD ROM drive 2 Click Start Control Panel then click the Appearance and Themes icon B22 i dala a E la My Recent Documents gal BANA epee gt naa pectin HET SOLO NP Ay Masir e3 Mokapoad LI ay Haba aa Gya Wg mana a cone Panata te Ad orb R sa 7 ee Lre ome Bp ee Printers Andi Paes c7 yirs Alodia Maro a 7 ir and Support mal MGM Kaplorar p kiko i pT e mn fee piia Pu Soarch etre Plo Pizh po ko na denied EF fun e Petes a cod Misano 9 60 rage as fe eo ore M turn cre 3 Click Display icon and choose the Settings tab then click Advanced Lin geboy Boe peer Ee Theres Goblets Duren Dower pamer Selle FE kep treet tes Msg a a ee E i a a E ew Naka eo or pick o Control Panel icon Peg mwd Ploy kburi ore JE Prophet ol Pg GAE aa Grka pisiy i gt High 32 Ext Ca a el oes NG ee 1024 by FES pinole tae 8 EE ee ama cancer am Pe 4 a Geforce a Device Selection aD Coly Coupction Geral iwe General Adapter Horic Trees het Color Hanagamani Morio ype za Fhag ard Play Miconia Pha and Play Monkor a a he Marnd achace
52. ilated location Ensure that there is a clearance of more than 10 cm from the wall e Otherwise it may result in fire due to an increase in the internal temperature 3 Ensure that the packaging vinyl is kept away from children e Otherwise it may result in serious harm suffocation if children play with it L If the height of your monitor is adjustable do not place any ob ject or part of your body on the stand when lowering it e This may cause damage to the product or the person carrying it When cleaning the monitor case or the surface of the TFT LCD screen wipe with a slightly moistened soft fabric 3 Do not spray cleaner directly onto the surface of the product e Otherwise this may result in the discoloration and distortion of the structure and the screen surface may peel off Others Safety Instructions L When cleaning the power plug pins or dusting the power outlet clean it with a dry cloth e Otherwise it may result in fire L When cleaning the product make sure to disconnect the power cord e Otherwise it may result in electric shock or fire 3 When cleaning the product disconnect the power cord and clean it softly with a dry cloth e Do not use chemicals such as wax benzene alcohol thinner mosquito repellant lubricant or cleaner These may change the appearance of the product surface and peel off the indica tion labels on the product L Since the product housing
53. is easily scratched make sure to use the specified cloth only L When cleaning the product do not spray water directly onto the main body of the product e Ensure that water does not enter the product and that it is not wet e Otherwise this may result in electric shock fire or a malfunc tion L The product is a high voltage product Ensure that users do not disassemble repair or modify the product themselves e Otherwise this may result in electric shock or fire If the product needs to be repaired contact a Service Center J If there is a strange smell or a strange sound or smoke is coming from the product disconnect the power plug immediately and con tact a Service Center e Otherwise this may result in electric shock or fire L Do not place this product in a location exposed to moisture dust smoke water or in a Car e Otherwise this may result in electric shock or fire L When you drop the product or the case is broken turn the power off and disconnect the power cord Contact a Service Center e Otherwise this may result in electric shock or fire Safety Instructions 3 If thunder or lightening is occurring do not touch the power cord or antenna cable e Otherwise this may result in electric shock or fire LJ Do not try to move the monitor by pulling only the wire or the signal cable e Otherwise it may fall and result in electric shock damage to the product or fire due to da
54. k Next button 8 Click the Have Disk button 9 Specify A D driver then click OK button 10 Select Show all devices and choose the monitor that corresponds to the one you con nected to your computer and click OK 11 Continue choosing Close button and OK button until you close the Display Properties dialogue box Microsoft Windows NT Operating System 1 Click Start Settings Control Panel and then double click Display icon 2 In Display Registration Information window click Settings Tab and then click All Display Modes 3 Select a mode that you wish Resolution Number of colors and Vertical frequency and then click OK 4 Click Apply button if you see the screen working normally after clicking Test If the screen is not normal change to a different mode lower mode of resolution colors or frequency Note If there is no Mode at All Display Modes select the level of resolution and vertical frequency by referring to the Preset Timing Modes in the user guide Linux Operating System To execute X Window you need to make the X86Config file which is a type of system setting file 1 Press Enter at the first and the second screen after executing the X86Config file 2 The third screen is for setting your mouse 3 Seta mouse for your computer 4 The next screen is for selecting a keyboard Using the Software 5 Set a Keyboard for your computer 6 The next screen is for
55. lected menu values When OSD is not on the screen push the button to adjust volume ENTER button ENTER Rear Introduction Activates a highlighted menu item SOURCE button SOURCE Switches from PC mode to Video mode Changing the source is only al lowed for external devices that are connected to the LCD Display at the time PC gt DVI AV HDMI Magicinfo TV BNC Component Note e The TV menu is available when a TV tuner box is installed e DX model can use Magiclnfo menu when mounted Network box D MENU Opens the on screen D MENU Note e This is available when a TV tuner box is installed Power button O Use this button for turning the LCD Display on and off Brightness Sensor The product s Brightness Sensor function automatically detects the sur rounding brightness using a brightness sensor and adjusts its brightness accordingly Power indicator Shows PowerSaver mode by blinking green Note See PowerSaver described in the manual for further information regarding power saving functions For energy conservation turn your LCD Display OFF when it is not needed or when leaving it unattended for long periods 10 Remote Control Sensor Aim the remote control towards this spot on the LCD Display Note For detailed information concerning cable connections refer to Connecting Cables under Setup The LCD Display s configuration at the back may var
56. lot on the back of the dis play Lock the lock VAN Note Introduction Note These are general instructions For exact instructions see the User Manual sup plied with the locking device You can purchase the locking device from an electronics store an online shop or our service center See Connecting Cables for further information regarding cable connections Remote Control Note The performance of the remote control may be affected by a TV or other electronic device operating near the LCD Display causing a malfunction due to interference with the frequen Cy SAMSUNG O B900 000000 B809 929096 6d POWER L OFF Number Buttons DEL button VOL tk MUTE TV DTV FI MENU Ez i INFO COLOR BUTTONS FILE TTX MIX STILL AUTO S MODE MDC LOCK SOURCE E ENTER PRE CH v CHIP A D MENU GUIDE 1 POWER 2 0 Off 3 Number Buttons 4 DEL button 5 VOL 6 K MUTE 7 TVIDTV 8 EJ MENU gL 6 10 1 INFO 11 COLOR BUTTONS 12 TTX MIX 13 STILL 14 AUTO 15 S MODE Introduction SD RETURN Up Down Left Right buttons E Exit srs Magiclnfo P MODE HI DUAL MTS PIP SWAP 60 089009046 Turns the product On Turns the product Off Press to change the channel The button operates only for DTV It is used to select MMS multi channel for a DTV Adjusts the audio volume Pauses mutes the audio output temporarily
57. low lt 0 8 V Maximum Pixel Clock 165 MHz Analog Digital Power Supply This product supports 100 240 V Since the standard voltage may differ from country to country please check the label on the back of the product Signal Cable 15pin to 15pin D sub cable Detachable DVI D to DVI D connector Detachable Dimensions W x H x D Weight SyncMaster 520DX 1211 x 776 6 x 311 mm 47 7 x 30 6 x 12 2 inches Without Stand Specifications Dimensions W x H x D Weight 1211 x 776 6 x 311 mm 47 7 x 30 6 x 12 2 inches 36 kg 79 4 Ibs With Stand SyncMaster 520DXn 1211 x 776 6 x 311 mm 47 7 x 30 6 x 12 2 inches Without Stand 1211 x 776 6 x 311 mm 47 7 x 30 6 x 12 2 inches 37 4 kg 82 5 Ibs With Stand VESA Mounting Interface 400 x 400 mm Environmental considerations 520DXn Operating Temperature 50 F 104 F 10 C 40 C Humidity 10 Yo 80 Yo non condensing Storage Temperature 4 F 113 F 20 C 45 C Humidity 5 95 non condensing 520DX Operating Temperature 32 F 104 F 0 C 40 C Humidity 10 80 non condensing Storage Temperature 4 F 113 F 20 C 45 C Humidity 5 95 non condensing Plug and Play Capability This LCD Display can be installed on any Plug amp Play compatible system The interaction of the LCD Display and the computer systems will provide the best op erating conditions and LCD Display settings In most cases the LCD
58. lt Back B Mext N gt Finish Cancel You can select which rotation type will be applied to your device 5 Setup Information ma Magiclnfo Setup Wizard v 1 09 Setup Information 1 Application bdagiclnto Pro LAN WAN based version 2 Internet Protocol TCP P IF 10 588 68 107 3 Language English 4 Screen Type Landscape W Do not show again Click lt Back B Cancel Shows the settings that have been selected by the user Note If the Magiclnfo icon is not displayed on the notification area double click the Magiclnfo icon on the window desktop The icon will appear Troubleshooting Self Test Feature Check Note Check the following items yourself before calling for assistance Contact a Service Center for problems that you cannot solve by yourself Self Test Feature Check 1 Turn off both your computer and the LCD Display 2 Unplug the video cable from the back of the computer 3 Turn on the LCD Display The figure shown below Check Signal Cable appears on a black background when the LCD Display is working normally even though no video signal is detected While in the Self Test mode the LED power indicator remains green and the figure moves around on the screen qr Check Signal Cable PC 4 Turn off your LCD Display and reconnect the video cable then turn on both your com puter and the LCD Display lf your LCD Display screen remains blank after using the previous pro
59. mage to the cable CJ Do not lift or move the product back and forwards or right and left while only holding the power cord or signal cables e Otherwise it may fall and result in electric shock damage to the product or fire due to damage to the cable Make sure that the ventilating opening is not blocked by a table or curtain e Otherwise it may result in fire due to an increase in the internal temperature 3 Do not place any containers containing water vases flower pots medicines as well as any metal on the product EF If water or a foreign material enters the product disconnect the power cord and contact a Service Center e This may result in a product malfunction electric shock or fire 3 Do not use or keep combustible spray or flammable material near the product e Otherwise this may result in an explosion or fire 3 Do not insert any metal such as chopsticks coins pins and steel or flammable objects such as matches or paper inside the J product through the ventilating openings input and output termi nals etc e f water or foreign material enters the product disconnect the power cord and contact a Service Center e Otherwise this may result in electric shock or fire L When using a fixed screen for a long time an afterimage or stain may occur e f you are not using your product for a long period of time put it into sleep mode or use a moving screen saver J Set a resol
60. mupm all 12 aa bd Activated Volume Source Cao e20 ea arMove Turns the LCD Display on automatically at a preset time Controls the mode and the volume level at the time the LCD Display turns on automatically Off Timer Hour Minute am pm a Activated Turns the LCD Display off automatically at a preset time Menu Transparency L Ts i High Medium i Low Change the transparency of the background of the OSD 1 High 2 Medium 3 Low 4 Opaque Safety Lock PIN Li Ts Adjusting the LCD Display The password can be changed Energy Saving This feature adjusts the power consumption of the unit in order to save energy 1 Off 2 On Note If Energy Saving mode is Off you can obtain the maximum display brightness HDMI Black Level L When a DVD or set top box is connected to your TV via HDMI it may cause a degradation in the screen quality such as an increase in the black level a low contrast or discoloration etc depending on the external device connected In this case adjust the screen quality of your TV by configuring the HDMI black level 1 Normal 2 Low Video Wall A Video Wall is a set of video screens connected together so that each screen shows a part of the whole picture or where the same picture is repeated on each screen When the Video Wall is on you can adjust the Video Wall screen setting ae Note When Video Wall is running t
61. n Safety Instructions 3 Ensure that the power plug is plugged into the power outlet firmly and correctly e Otherwise this may result in fire L Do not forcefully bend or pull the power plug and do not place any heavy material on it e Otherwise this may result in fire L Do not connect multiple appliances to the same power outlet e Otherwise this may cause fire due to overheating Do not disconnect the power cord while using the product e Otherwise this may result in damage to the product due to electric shock To disconnect the apparatus from the mains the plug must be pulled out from the mains socket therefore the mains plug shall be readily operable e This may cause electric shock or fire J Use only the power cord provided by our company Do not use the provided power cord of another product e Otherwise this may result in fire or electric shock Connect the power plug to a wall outlet that can be easily reached e When a problem occurs with the product you must unplug the power plug to cut the power off completely You cannot cut the power off completely using only the power button on the prod uct Be sure to contact an authorized Service Center when installing your monitor in a location with heavy dust high or low temperatures high hu midity and exposed to chemical substances and where it operates for 24 hours such as at airports train stations etc Failure to do so may cause serio
62. ne LIT The color tones can be changed 1 Off 2 Cool 3 Normal 4 Warm 5 Custom Note If you set the Color Tone to Cool Normal Warm or Custom the Color Temp function is disabled If you set the Color Tone to Off the Color Control function is disabled Color Control LIT Adjusts individual Red Green Blue color balance Note If you adjust the picture by using the Color Control function Color Tone will turn to the Custom mode Adjusting the LCD Display Red Green Blue Color Temp Color Temp L 5000K 4k Adjust Color Temp is a measure of the warmth of the image colors Note This function is only enabled if the Color Tone is set to Off Image Lock i Image Lock is used to fine tune and get the best image by removing noise that creates unstable images with jitters and shakiness If satisfactory results are not obtained using the Fine adjustment use the Coarse adjustment and then use Fine again Available in PC mode only Coarse Removes noise such as vertical stripes Coarse adjustment may move the screen image area You may relocate it to the center using the horizontal control menu Fine Removes noise such as horizontal stripes If the noise persists even after Fine tuning repeat it after adjusting the frequency clock speed H Position H Position Adjusts the screen location horizontally V Position V Pasition Adjusting the LCD Displ
63. nnel Television Stereo mode Audio Type MITS S_ Mode Default FM Stereo Mono Mono Manual Stereo Mono Stereo Change SAP Mono lt SAP Mono 30 PIP Every time you press the button a PIP screen appears This fuction does not work for this LCD Display 31 SWAP Swaps the contents of the PIP and main image The image in the PIP window will appear on the main screen and the main screen image will appear in the PIP window This fuction does not work for this LCD Display Mechanical Layout 520DX N Mechanical Layout id 7 86 1211 0 1163 0 21 5 713 0 659 0 349 9 uy d N a LUN 98 5 my Introduction LCD Display Head NETWORK MODEL SIZE Pac bl l cd tang ng OPT row MOUNT HOLE 2 wd X LED ote MACHINE Cr N 4 EA T e OR DI VO EL Gb UY fi a F EI NUN Fi a aaa i lk mg FA E fr 5 COVER NOO ATA MODEL ONLY ma HOLE 1 WG LB ETO MACHINE W ZEA amn mne nnn e pa 5 N WAI Ss U N G 134 4 _ ar DPT NOW TUWER W 18 0 LIGO MACHINE SCREW PEA Installation VESA Bracket e When installing VESA make sure to comply with the international VESA standards e Purchasing VESA Bracket and Installation Information Please contact your nearest SAMSUNG Distributor to place an order After your order is placed installation profes sionals will visit you and install the bracket e Atleast 2 persons are needed in order to move the LCD Display e
64. not drop any objects onto the product or cause any impact to the product e Otherwise this may result in electric shock or fire L Do not use a humidifier or kitchen table near the product e Otherwise this may result in electric shock or fire L When there is a gas leak do not touch the product or the power plug but ventilate immediately e fa spark occurs it may cause an explosion or fire J If the product has been turned on for a long time the display panel becomes hot Do not touch it e Keep the small accessories in a location out of the reach of children L Be careful when adjusting the angle of the product or the height of the stand e This may result in personal injury as your hand or fingers may become caught e Also if you tilt the product too far it may fall and cause personal injury CJ Do not install the product in a location low enough for children to reach e Otherwise it may fall and result in personal injury e Since the front part of the product is heavy install the product on a level and stable surface 3 Do not put any heavy objects on the product e This may result in personal injury and or damage to the prod uct Introduction Package Contents Checking the Contents of the Package 4 aay Ta Lift up the package box by Check the contents of the Remove the Styrofoam holding the grooves on package and vinyl cover both sides of the package box Note e After unpacking
65. ompabbdiy warla ainhoa PP Tell os wate Mie belir ix impaxtard Continuing pour installation of this software mag impir or destabilize the conect operation of your system ether immediately of m the future Mocrompolt sirongly recommends thal pou Hop this installation now and contact the hardware vendor for softeare that has passed Windows Logo testing Continue Argway STOP instalation Note This monitor driver is under certifying MS logo and this installation doesn t damage your system The certified driver will be posted on Samsung Monitor homepage http www samsung com Click the Close button then click OK button continually Using the Software Hardware Update Wizard jf Completing the Hardware Update The aaa hart fated tial the ooftesare for Saris Ere Dotai To ama dota aout he chive files Tid Late tees cher Fon than hese on Ar nika si F tha daa kada after upang iha dia roll di k D L Bol Back Driver back bo iha pavicusk inibalad cheer Urar giai Ta urata ha ieee Decherd 10 Monitor driver installation is completed Microsoft Windows 2000 Operating System When you can see Digital Signature Not Found on your monitor follow these steps 1 Choose OK button on the Insert disk window 2 Click the Browse button on the File Needed window 3 Choose A D Driver then click the Open button and then click OK button How to install 1 Click Start
66. or information on its replacement please contact your service provider Authority Information in this document is subject to change without notice Appendix 2010 Samsung Electronics Co Ltd All rights reserved Reproduction in any manner whatsoever without the written permission of Samsung Elec tronics Co Ltd is strictly forbidden Samsung Electronics Co Ltd shall not be liable for errors contained herein or for incidental or consequential damages in connection with the furnishing performance or use of this ma terial Samsung is the registered trademark of Samsung Electronics Co Ltd Microsoft Windows and Windows NT are registered trademarks of Microsoft Corporation VESA DPM and DDC are registered trademarks of Video Electronics Standard Association All other product names mentioned herein may be the trademarks or registered trademarks of their respective owners SfS O TruSurround XT SRS and the symbol are trademarks of SRS Labs Inc TruSurround XT TruSurround XT technology is incorporated under license from SRS Labs Inc CALIFORNIA USA ONLY Applicable for networking models only This Perchlorate warning applies only to primary CR Manganese Dioxide Lithium coin cells in the product sold or distributed ONLY in California USA Perchloate Material special handling may apply See www dtsc ca govfhazardouswaste perchlorate
67. p and down Horizontal Bar with Black color r Lir iI l IVIC 0Z348 20 30 UA102 21 10 Note Please check CD s User Guide at OSD Function some model s will not availa ble Apply the Screen Pixel function on Product Information Apply the Screen Pixel function Symptom Dot with Black Color move up and down FLIGHT TIME H OZ348 20 30 UA102 21 10 Apply the Screen Bar function Symptom Horizontal Vertical Bar with Black Color move up and down i gt FLIGHT TIME Horizontal Bar OZ 20 3U UA102 21 10 ma Note Please check CD s User Guide at OSD Function some model s will not availa ble a Apply the Screen Erasing function on Product Apply the Screen Erasing function Symptom 2 Vertical blocks move with erasing the display HT TIME OZ448 20 30 UA102 21 10 Note Please check CD s User Guide at OSD Function some model s will not availa ble Appendix Contact SAMSUNG WORLDWIDE Note If you have any questions or comments relating to Samsung products please contact the SAMSUNG customer care center U S A CANADA MEXICO ARGENTINA BRAZIL CHILE COLOMBIA COSTA RICA ECUADOR EL SALVADOR GUATEMALA HONDURAS JAMAICA NICARAGUA PANAMA PERU PUERTO RICO REP DOMINICA TRINIDAD 8 TO BAGO VENEZUELA ALBANIA AUSTRIA BELGIUM BOSNIA BULGARIA North America 1 800 SAMSUNG 726 7864 http www samsung com 1 800 SAMSUNG
68. s pressed If there s still noise after the automatic adjustment use the Fine Coarse adjustment function o When viewing a fixed screen for an extended period of time a residual image or blurriness may appear Change the mode to energy save or set a screensaver to move the picture when you need to be away from the monitor for an extended period of time PRODUCT INFORMATION Image Retention Free ba What is Image Retention Image retention may not occur when a LCD panel is operated under normal con ditions Normal conditions are defined as continuously changing video patterns When the LCD panel is operated for a long time with a fixed pattern over 12 hours there may be slight difference in voltage between electrodes that work the liquid crystal LC in a pixel The voltage difference between electrodes increases with time forcing the liquid crystal to lean When this occurs the previous image may be seen when the pattern is changed To prevent this the accumulated voltage difference must be decreased Information Common Electrode ITO Black Matrix Color Filter Gate TFT Pixel Electrode Storage Capacitor Bus Line TO ca Power Off Screen Saver or Power Save Mode e Turn the power off for 4 hours after 20 hours in use e Turn the power off for 2 hours after 12 hours in use e Set the Monitor to power off with the PC Display Properties Power Scheme e Use a Screen saver if possible Screen saver in one
69. setting your monitor 7 First of all set a horizontal frequency for your monitor You can enter the frequency directly 8 Set a vertical frequency for your monitor You can enter the frequency directly 9 Enter the model name of your monitor This information will not affect the actual execution of X Window 10 You have finished setting up your monitor Execute X Window after setting other re quested hardware MDC Multiple Display Control Installation 1 Insert the installation CD into the CD ROM drive 2 Click the MDC installation file Note If the popup window to install the software for the main screen is not displayed proceed with the installation using the MDC executable file on the CD 3 When the Installation Shield Wizard window appears click Next 4 Select agree to the terms of the license agreement to accept the terms of use 5 Click Install 6 The Installation Status window appears 7 Click Finish 8 When the installation is complete the MDC executable icon appears on your desktop Double click the icon to start the program MDC execution icon may not appear depending on specification of computer sys tem or monitor If that happens press F5 Key Installation Problems The installation of MDC can be affected by such factors as the video card motherboard and the network environment Using the Software Uninstall The MDC program can be removed only by using the Add or
70. t F f r ey ee E 7 L TYG To prevent after images on the screen you can use this function so that every minute pixels on the LCD are moved in horizontal or vertical direction Adjusting the LCD Display 1 Off 2 On Horizontal Dot Sets how many pixels the screen moves horizontally Five adjustment levels O 1 2 3 and 4 Vertical Line Sets how many pixels the screen moves vertically Five adjustment levels O 1 2 3 and 4 Time alis min Set the time interval for performing the horizontal or vertical movement respectively Timer Timer Adjusting the LCD Display You can set the timer for Screen Burn Protection If you start the operation to erase any residual image the operation will be performed for the set period of time and then automatically finish 1 Off 2 On Mode You can change the Safety Screen Type 1 Scroll 2 Bar 3 Eraser Period Use this function to set the execution period for each mode set in the timer Time Within the set period of time specify a time for execution e Mode Scroll 1 5 sec e Mode Bar Eraser 10 50 sec Adjusting the LCD Display Scroll Eraser This function prevents after images on the screen by moving all the pixels on the LCD ac cording to a pattern Use this function when there are remaining after images or symbols on the screen especially when you displayed a still image on the scre
71. t and Control Panel Then double click on Appearance and Personal ization a KM PAA 3 4 Dang Bra Kora bt etch pout eer Kagakaihapinn Mentors en MACA Geon 6600 LE hitrost Carpio mi p Barba LOTE bilal if Figini AE bet ET ipy PILH pah Ha a lami Her bert doin kpe hapi Lo cod 5 Click Properties in the Monitor tab If the Properties button is deactivated it means the configuration for your monitor is completed The monitor can be used as is Using the Software If the message Windows needs is displayed as shown in the figure below click Continue alla daa aa a a a y Gearing Bia check boo lia yous fo ad dag mana Fa fa manor cannot denliy comecty Thee may bead Ko in ugab Note This monitor driver is under certifying MS logo and this installation doesn t damage your system The certified driver will be posted on Samsung Monitor homepage http www samsung com Click Update Driver in the Driver tab a Garie PAP Mori Dri type Mortons rf echo Baraan miter Pee Lanas sa WADU GeFaee BGI LE irmah Capo ae KO oho iate HE PEG PAP Ta waaa aioe bou Ha daya Ha To ala bha a piia for ha a na device aa ater pang ha Par rol Lah ko eb decay alia ee Te urinal Ba doe Arc Check the Browse my computer for driver software checkbox and click Let me pick from a list of device drivers on my computer 7 cog Ni naag ng IR ar Hime cho p
72. t kHz Vertical Frequency Like a fluorescent lamp the screen has to repeat the same image many times per second to display an image to the user The frequency of this repetition is called the Vertical Frequency or Refresh Rate Unit Hz Information For Better Display D Adjust the computer resolution and screen injection rate refresh rate on the computer as described below to enjoy the best picture quality You can have an uneven picture quality on screen if the best picture quality is not provided for TFT LCD e Resolution 1920 x 1080 e Vertical frequency refresh rate 60 Hz e3 TFT LCD panels manufactured by using advanced semiconductor technology with a precision of 1ppm one millionth and above is used for this product But the pixels of RED GREEN BLUE and WHITE color seem to be bright sometimes or some of black pixels could be seen This is not from bad quality and you can use it without any problems e For example the number of TFT LCD sub pixels contained in this product are 6 220 800 63 When cleaning the monitor and the panel outside please apply the recom mended small amount of cleaner by using a soft cloth to polish Do not force the LCD area but rub softly If excessive force is applied you may stain it D If you are not satisfied with the picture quality you can get better quality of picture by performing the Auto Adjustment function in display screen that is appeared as window termination button i
73. t Application step 1 iis Mazicinfo Setup Wizard v 1 09 Select Application step 1 Select kW Magiclnfo Pro LAN WAN based version F Madiclnto Advanced Web based version 60 day Trial Edition E j Select Later 4 Click Mest M gt Finish Cancel You can select an Application to be executed in your computer when Windows starts 2 Select TCP IP step 2 Adjusting the LCD Display iim Magiclnfo Setup Wizard v 1 09 WA Select TCP P step 2 a Obtain an IP address automatically M Use the following IP addres IN put IP address Subnet mask Default gateway Preferred ONS server Alternate DNS server Click lt Back B Next N gt Finish Cancel In step 2 of Magiclnfo Setup Wizard you don t have to go to Network Setting on the desktop to make your settings for TCP IP You just do that at step 2 of Magiclnfo installation 3 Select Language step 3 iz Magicinfo Setup Wizard v 1 09 ab Select Language step 3 Select the language you want to install on the system for menus and dialogs Current Language English O Chinese Traditional lt Back B Ment N gt Finish Cancel When using multiple languages you can choose and set a specific language among them 4 Select Screen Type step 4 Adjusting the LCD Display TA Mazicinfo 5etup Wizard 1 1 09 Select Screen Type step 4 Select W Landscape Portrait Click
74. tc In this case first check the source of the problem and then contact a Service Center or your dealer 1 Check if the power cord and the video cables are properly connected to the computer 2 Check if the computer beeps more than 3 times when booting If it does request an a service for the main board of the computer 3 If you installed a new video card or if you assembled the PC check if you installed the Adaptor video 4 Check if the scanning ratio of the video screen is set to between 50 Hz 85 Hz Do not exceed 60Hz when using the maximum resolution 5 If you have problems in installing the Adaptor video driver boot the computer in Safe Mode remove the Display Adaptor in the Control Panel gt System gt Device Admin istrator and then reboot the computer to reinstall the Adaptor video driver Check List Note e The following table lists possible problems and their solutions Before calling for assis tance check the information in this section to see if you can remedy any problems for yourself If you do need assistance please call the phone number on the Information section or contact your dealer e For more network related information refer to the Magiclnfo Troubleshooting section Problems related to the Installation PC Mode Note Problems related to the LCD Display installation and their solutions are listed Q The LCD Display screen flickers A Troubleshooting Check if the signal c
75. te shown here Internet web site http www samsung com Worldwide Installing the Monitor Driver Automatic 1 Insert CD into the CD ROM drive 2 Click Windows 3 Choose your monitor model in the model list then click the OK button a SAMSUNG monitor installer Select the dig pln adagia on which vE WARA 1G iial Gye manii i RADEON 9555 Hug and Poy Figi Sealed the morda ehich you wari bo inatall 4 Ifyou can see following message window then click the Continue Anyway button Then click OK button Microsoft Windows XP 2000 Operating System Hardware Installation A The software you ane installing for this hardware Samsung saa has not passed mds Logo bestng ko wenhy is compahbdiy with Windows XP Tell me why this besting is important Continuing your installation of this software may impair or destabilize the comect operation of your system either immediately of in the future Microsoft strongly recommends thal you stop this installation now and contact the hardware vendor for software that haz passed Windows Logo testing Using the Software Note This monitor driver is under certifying MS logo and this installation doesn t damage your system The certified driver will be posted on Samsung Monitor homepage http www samsung com Installing the Monitor Driver Manual Microsoft Windows Vista Operating System 1 Insert your Manual CD into your CD ROM drive 2 Click EH Star
76. ted display 8 Color Temp Adjusts the Color Temp for the selected display 9 Brightness Sensor Adjusts the Brightness Sensor for the selected display 10 Dynamic Contrast Adjusts the Dynamic Contrast for the selected display The Input source of Magicl nfo works only on Magicl nfo model Color Temp is only enabled if the Color Tone is set to Off The Input source of TV works only on TV model This feature is available only for the displays whose power status is ON and if no selection is made the factory default is displayed Ng sa Settings SA Picture PC 1 Click Settings of the main icons and the Settings Control screen appears Ba Muhiple Display Contra File Remocon Safety Lock Port Selection Help Select All Clear AN Busy E AL E PC BNC DVI je Contrast 56 Brightness Red Green Blue 3 Color lone Color Temp 10000K Brightness Sensor OnO Dynamic Contrast Je Info Grid shows some basic information necessary to Settings Control When each function is selected the set value of the selected function is displayed in the slide When selected each function fetches the value for the set and displays it on the slide bar When Select All is chosen the default value is displayed Changing a value in this screen will automatically change the mode to CUSTOM 1 Picture PC Available only for PC BNC DVI 2 Contrast Adjusts Contrast of the selected display 3 Brigh
77. ted display PC Time To change the current time first change the PC Time 2 On Time Setup Set the Hour Minute AM PM of On Time Setup Status Source Volume of the selected display 3 Off Time Setup Set the Hour Minute and AM PM Status for Off Time Setup of the selected display 4 Shows the On Time settings 5 Shows the Off Time settings 3k The Input source of Magicl nfo works only on Magicl nfo model The Input source of TV works only on TV model Time Control is available only for the displays for which the power status is ON amp At On Time Setup TV Source functions only for TV Model k At On Time Setup Magicl nfo Source functions only for Magicl nfo Model ING PIP PIP Size 1 Click PIP of the main icons and the PIP control screen appears Click Select All or use Check Box to select a display to control Safety Lock Port Selection Help SelectAll Clear All Busy PIP Size Ye Info Grid shows some basic information necessary to PIP Size Control 1 PIP Size Shows the current PIP Size of the display in use 2 OFF Turns off the PIP of the selected display 3 Large Turns on the PIP of the selected display and changes the size to Large 4 Small Turns on the PIP of the selected display and changes the size to Small 5 Double 1 Turns on the PIP of the selected display and changes the size to Double 1 6 Double 2 Turns on the PIP of the selected display and changes the size to Do
78. the package make sure to check the contents of the package e Store the packaging box in case you need to move the Product later e f any items are missing contact your dealer e Contact a local dealer to purchase optional items Unpacking LCD Display Introduction Manuals Quick Setup Guide Warranty Card User Manual Not available in all loca tions ay Magicinfo Software CD Magiclnfo Manual CD Applicable to the DXn model only Cables D Sub Cable Power Cord Others Remote Control Batteries AAA X 2 HDD Cover Not available in all loca tions BNC to RCA Adaptor Jack Sold separately DVI Cable Wall Mount KIT LAN Cable Applicable to the DXn model only Introduction Sold separately t TV tuner box NetWork Box Semi Stand KIT Applicable to the DX mod el only Note e You can purchase and connect a separate network box or TV tuner box For information on how to use these refer to their respective user manuals e You can only connect one external box Your LCD Display Front MENU button MENU Opens the on screen menu and exits from the menu Also use to exit the OSD menu or return to the previous menu Navigate buttons Up Down buttons Moves from one menu item to another vertically or adjusts selected menu values Adjust buttons Left Right buttons Volume buttons Moves from one menu item to another horizontally or adjusts se
79. tness Adjusts Brightness for the selected display 4 Red Adjusts red Color of the selected display Available only for NT 5 Green Adjusts green Color of the selected display Available only for NT 6 Blue Adjusts blue Color of the selected display Available only for NT 7 Color Tone Adjusts the Color Tone for the selected display 8 Color Temp Adjusts the Color Temp for the selected display 9 Brightness Sensor Adjusts the Brightness Sensor for the selected display 10 Dynamic Contrast Adjusts the Dynamic Contrast for the selected display The Input source of Magicl nfo works only on Magicl nfo model The Input source of TV works only on TV model Color Temp is only enabled if the Color Tone is set to Off k This feature is available only for the displays whose power status is ON and if no selection is made the factory default is displayed Audio 1 Click Settings of the main icons and the Settings Control screen appears File Remocon Safety Lock Port Selection Help Select All Clear All Busy All Inputs bl ae Ll iT SD aaa cs ll Info Grid shows some basic information necessary to Settings Control When each function is selected the set value of the selected function is displayed in the slide When selected each function fetches the value for the set and displays it on the slide bar When Select All is chosen the default value is displa
80. uble 2 7 Double 3 Picture By Picture Turns on the PBP of the selected display and changes the size to Double 3 The Input source of Magici nfo works only on Magici nfo model The Input source of TV works only on TV model k PIP Size can be controlled with turning on the LCD Display power NG PIP PIP Source 1 Click PIP of the main icons and the PIP control screen appears All Inputs OFF Large Small Double 1 Double Double 3 O fim Multiple Display Cont Safety Lock Port Selection File Remocon Select All Clear Alt Help PIP Source a All Inputs Aw 5 5 Video 6 Component HOMI of Eau E Info Grid shows some basic information necessary to PIP Source Control 1 PIP Source PIP Source can be controlled with turning on the LCD Display power 2 PC Changes the source of the PIP of the selected display to PC 3 BNC Changes the source of the PIP of the selected display to BNC 4 DVI Changes the source of the PIP of the selected display to DVI 5 AV Changes the source of the PIP of the selected display to AV 6 S Video Changes the source of the PIP of the selected display to S Video 7 Component Changes the source of the PIP of the selected display to Component 8 HDMI Changes the source of the PIP of the selected display to HDMI Note Some of the PI P Sources may not be available for selection depending on the input sour
81. us damage to your monitor 3 Ensure that at least two persons lift and move the product e Otherwise it may be dropped and cause personal injury and or damage the product 3 When installing the product in a cabinet or rack make sure that the front end of the bottom of the product does not project out e Otherwise it may fall or cause personal injury e Use a cabinet or rack of a size appropriate to the product Clean CA SPH 2 O PA q Safety Instructions LJ DO NOT PLACE CANDLES MOSQUITO REPELLANT CIG ARETTES AND ANY HEATING APPLIANCES NEAR THE 4 as h PRODUCT e Otherwise this may result in fire L Keep heating appliances as far away from the power cord or the product as possible e Otherwise this may result in electric shock or fire 3 Do not install it in a badly ventilated location such as a bookcase or closet e Otherwise this may result in fire due to an increase in the in ternal temperature 3 When putting the product down make sure to put it down softly e Otherwise this may result in damage to the screen display J Do not place the front of the product on the floor N e Otherwise this may result in damage to the screen display 3 Ensure that an authorized installation company installs the wall mount e Otherwise it may fall and cause personal injury e Make sure to install the specified wall mount 3 Install your product in a well vent
82. ution and frequency appropriate to the product e Otherwise your eyesight may be damaged L When using headphones or earphones do not turn the volume too high a NG Having the sound too loud may damage your hearing Safety Instructions 3 If you continually move closer to the product screen your eye sight may be failing 3 Take a rest for at least five 5 minutes after using the monitor for one 1 hour This reduces the weariness of your eyes O Do not install it in an unstable location such as an unstable rack or uneven surface or a location exposed to vibrations e Otherwise it may fall and cause personal injury and or damage the product e fyou use the product in a location exposed to vibrations it may damage the product and result in fire L When moving the product turn the power off and disconnect the power plug antenna cable and all the cables connected to the product e Otherwise it may result in electric shock or fire L Ensure that children do not hang onto the product or climb up onto the product e The product may fall and cause personal injury or death J If you do not use the product for a long period of time disconnect the power cord from the power outlet e Otherwise this may result in overheating or fire due to dust and may result in fire due to electric shock or leakage 3 Do not place any heavy items or toys or confectionery such as cookies etc that may attract the attention
83. with a Camcorder If not check your local electronics store If your camcorder is stereo you need to connect a set of two cables Connecting a DVD Player Connect a Component cable between the BNC COMPONENT IN Pg Y Pg port on the LCD Display and the Pr Y Pg jacks on the DVD player Connect a set of audio cables between the AV AUDIO IN L AUDIO R on the LCD Dis play and the AUDIO OUT jacks on the DVD player Note Select Component for the connection to a DVD player using the SOURCE button on the front of the LCD Display or on the remote control Then start the DVD Player with a DVD disc inserted A component cable is optional For an explanation of Component video consult your DVD manual Connecting a DTV Set Top Box Note The connections for a typical Set Top Box are shown below Connections 00335 i m bimi pog lala 1 a L F ai a 1 Connect a Component cable between the BNC COMPONENT IN Pp Y Pg port on the LCD Display and the Pr Y Pg jacks on the Set Top Box 2 Connect a set of audio cables between the AV AUDIO IN L AUDIO R on the LCD Dis play and the AUDIO OUT jacks on the Set Top Box Note e Select Component for the connection to a DTV Set Top Box using the SOURCE button on the front of the LCD Display or on the remote control e For an explanation of Component video see your Set Top Box owner s manual Connecting Using a HDMI Cable Note
84. wn in the picture Check if the resolution and frequency set for the computer video card falls in the range supported by the LCD Display If not reset them referring to the current Information under the LCD Display menu and Preset Timing Modes The image is too light or too dark Adjusts the brightness and contrast Refer to the Brightness Contrast 7 O 5 F O R R O F O F O Troubleshooting The screen color is inconsistent Adjust color using Custom under OSD Color Adjustment menu The color image is distorted by dark shadows Adjust color using Custom under OSD Color Adjustment menu The color white is poor Adjust color using Custom under OSD Color Adjustment menu The screen is blank and the power indicator light blinks every 0 5 or 1 seconds The LCD Display is using its power management system Press any key on the keyboard The screen is blank and it is blinking If you see the TEST GOOD message on the screen when you pressing the MENU button check the cable connection between the LCD Display and the computer to en sure that the connector is properly connected Problems related to Audio Note Problems related to audio signals and their solutions are listed below Q A 7 O Q A No sound Ensure that the audio cable is firmly connected to both the audio in port on your LCD Display and the audio out port on your sound card Refer to the Connecting a Computer Check the volume level
85. y slightly depending on the LCD Display model Introduction POWER sw ON 7OFF O Switches the LCD Display On Off Z POWER IN The power cord plugs into the LCD Display and the wall plug O RS232C OUT IN R5232C Serial PORT MDC Multiple Display Control Program Port Connect a serial cable cross type to R5232C on the product and RS232C on the PC To use an MDC the MDC program must be installed on the PC Note Go to Multi Control and select RS232C MDC as the MDC Connection O DVI PC HDMI IN DVI PC HDMI AU DIO IN PC DVI HDMI Audio Connection Terminal Input O DVI PC HDMI IN HDMI Connect the HDMI terminal at the back of your LCD Display to the HDMI terminal of your digital output device using a HDMI ca ble Introduction G DVI PC HDMI IN RGB PC Video Connection Terminal Connect the RGB port on the monitor to the RGB port on the PC using the D SUB cable DVI PC HDMIIN DVI PC Video Con nection Terminal Connect the DVI port on the monitor to the DVI port on the PC using the DVI cable DC OUT Make sure to use connecting DC OUT ter minal to the authorized TV Tuner Box SBB_DTC ZA N Otherwise this may result in damage to the product AV IN VIDEO VIDEO Connection Ter minal Connect the VIDEO terminal of your mon itor to the video output terminal of the exter nal device using a VIDEO cable D AV AUDI
86. yed Changing a value in this screen will automatically change the mode to CUSTOM 1 Audio Controls audio settings for all input sources 2 Bass Adjusts Bass of the selected display 3 Treble Adjusts Treble of the selected display 4 Balance Adjusts Balance of the selected display 5 SRS TS XT SRS TS XT Sound ON OFF of the selected display Sound Select Select either Main or Sub when PIP is On The Input source of Magicl nfo works only on Magici nfo model The Input source of TV works only on TV model k This feature is available only for the displays whose power status is ON and if no selection is made the factory default is displayed mage Lock 1 Click Settings of the main icons and the Settings Control screen appears fam fly ip sman Lanta Safety Lock Port Selection Help Select Al Clear All es m a j J Auto Adjustment Info Grid shows some basic information necessary to Settings Control 1 Image Lock Available only for PC BNC 2 Coarse Adjusts Coarse of the selected display 3 Fine Adjusts Fine of the selected display 4 Position Adjusts Position of the selected display 5 Auto Adjustment Self Adjust to the incoming PC signal The Input source of Magicl nfo works only on Magici nfo model The Input source of TV works only on TV model Settings Control is available only for the displays for which the power status is ON pno Maintenance Ww

Samsung 520DX User Manual

Contents

Download Pdf Manuals

Related Search

Related Contents