Home

Samsung 2443DW User Manual

1. DVI Cable USB Cable DP Cable The color and the appearance may differ depending on the product and the specifications are subject to change without prior notice to improve the performance e The cleaning cloth is supplied with black high glossy models only 2 1 Installing the Product 2 2 Installing the Stand Before assembling the product place the product down on a flat and stable surface so that the screen is facing downwards Place a soft cloth over the table to protect the product and place the product onto the cloth face down Insert the stand body into the stand base as shown in the figure Turn the connecting screw at the bottom of the stand fully so that it is completely fixed T G Caution Do not lift the product holding only the stand Disassembly is in the reverse order of the assembly Installing the Product 2 2 O Stand Stopper When pivot the monitor from horizontal to vertical tilt the monitor backward to maximum first 2 2 Installing the Product 2 3 Installing the Stand for the Wall Mount This product provides a stand mount of 100 mm x 100 mm 3 9 inches x 3 9 inches that complies with the VESA specifications Installing the Product 2 3 HAS Stand O Monitor Mounting interface pad Sold separately 1 Turn the product off and unplug the power cord from the wall outlet Place a soft cloth or cushion on a flat
2. 4 2 Installing the Software 4 3 MagicRotation What is MagicRotation O MagicRotation The MagicRotation Software from Samsung Electronics Inc provides the user with a rotation feature O 90 180 270 orientation that facilitates the optimum utilization of computer display screen better viewing and improved user productivity Installing the Software 1 Insert the installation CD into the CD ROM drive 2 Select the MagicRotation setup program Ifthe pop up screen for the software installation does not appear on the main screen find and double click the MagicRotation setup file on the CD ROM 3 Select the installation language and click Next 4 Complete the remaining software installation steps according to the instructions displayed on the screen The software may not work properly if you do not restart the computer after the installation e The MagicRotation icon may not appear depending on the computer system and the product specifications e If the shortcut icon does not appear press the F5 key Restrictions and Problems with the Installation MagicRotation The installation of MagicRotation may be affected by the graphics card motherboard and the networking environment Limitation 1 The Display Driver should be properly loaded for the MagicRotation to work properly The installed Display Driver should be the latest driver supplied by the vendor 2 If some applications like Windows Media
3. 2243DW DISPLAY MODE E e aaa REGENCY EZ PIXEL CLOCK MHZ Sine kr pe IBM 720 x 400 31 469 70 087 28 322 MAC 640 x 480 35 000 66 667 30 240 MAC 832 x 624 49 726 74 551 57 284 MAC 1152 x 870 68 681 75 062 100 000 VESA 640 x 480 31 469 59 940 25 175 VESA 640 x 480 37 861 72 809 31 500 VESA 640 x 480 37 500 75 000 31 500 VESA 800 x 600 35 156 56 250 36 000 VESA 800 x 600 37 879 60 317 40 000 VESA 800 x 600 48 077 72 188 50 000 VESA 800 x 600 46 875 75 000 49 500 VESA 1024 x 768 48 363 60 004 65 000 VESA 1024 x 768 56 476 70 069 75 000 VESA 1024 x 768 60 023 75 029 78 750 VESA 1152 x 864 67 500 75 000 108 000 VESA 1280 x 800 49 702 59 810 83 500 VESA 1280 x 800 62 795 74 934 106 500 VESA 1280 x 960 60 000 60 000 108 000 VESA 1280 x 1024 63 981 60 020 108 000 VESA 1280 x 1024 79 976 75 025 135 000 VESA 1440 x 900 55 935 59 887 106 500 VESA 1440 x 900 70 635 74 984 136 750 VESA 1680 x 1050 64 674 59 883 119 000 2443DW 3 2 Using the product DISPLAY MODE Bea NGG NA Mai PIXEL CLOCK MHZ ae ir Cal IBM 720 x 400 31 469 70 087 28 322 MAC 640 x 480 35 000 66 667 30 240 MAC 832 x 624 49 726 74 551 57 284 MAC 1152 x 870 68 681 75 062 100 000 VESA 640 x 480 31 469 59 940 25 175 VESA 640 x 480 37 861 72 809 31 500 VESA 640 x 480 37 500 75
4. Display Screen Saver Setting or Configure it in the BIOS Setup of the computer Windows Vista Change settings by selecting Control Panel Appearance and Personalization Personalization Screen Saver You can also use the BIOS SETUP menu on the PC Windows 7 Change settings by selecting Control Panel Appearance and Personalization Personalization Screen Saver You can also use the BIOS SETUP menu on the PC For more information refer to the Windows user manual for the computer Troubleshooting 5 3 6 More Information 6 1 Specifications MODEL NAME 2243DW 2443DW Size 22 inches 55 cm 24 inches 61 cm LCD Panel Display area 473 76 mm H x 296 1 mm V 518 4 mm H x 324 0 mm V Pixel Pitch 0 282 mm H x 0 282 mm V 0 270 mm H x 0 270 mm V Synchroniza Horizontal 30 81 kHz mola Vertical 56 75 Hz Display Color 16 7 M Optimum resolution Resolution 1680 x 1050 60 Hz 1920 x 1200 60 Hz Maximum resolution 1680 x 1050 60 Hz 1920 x 1200 60 Hz Input Signal Terminated RGB Analog DVI Digital Visual Interface Compliant Digital RGB DP Display Port 0 7 Vp p 5 Separate H V sync Composite SOG TTL level V high 2 2 0V V low s 0 8V Maximum Pixel Clock 150 MHz Analog DVI Display Port 170 MHz Analog DVI Display Port This product supports 100 240 V Since the standard voltage may diffe
5. This mode provides brightness and sharpness settings similar to those of a TV for the best entertainment environment movie DVD etc e lt Dynamic Contrast gt Controls the picture contrast automatically so that bright and dark pictures are balanced overall This menu is unavailable when lt MagicAngle gt or lt MagicEco gt is set MagicAngle This feature allows you to see optimal screen quality according to your viewing position When viewing the screen at an angle from below above or the side of the monitor by setting the appropriate mode for each position you can obtain a similar picture quality as viewing the screen directly from the front Set to lt Off gt when viewing directly in front of the screen lt Off gt Select when viewing from the front position e Lean Back Mode1 gt Select when viewing from a slightly lower position e Lean Back Mode2 gt Select when viewing from the lower position e lt Standing Mode Select when viewing from the upper position lt Side Mode gt Select when viewing from the left or right position e lt Group View Select when two or more person view among 000 position at the same time e Custom When lt Custom gt is selected settings for lt Lean Back Mode 17 is applied by default Users can set suitable picture quality as needed This menu is unavailable when lt MagicBright gt is set to lt Dynamic Contrast gt or l
6. www samsung com HONDURAS 800 7919267 http www samsung com JAMAICA 1 800 234 7267 http www samsung com NICARAGUA 00 1800 5077267 http www samsung com PANAMA 800 7267 http www samsung com PUERTO RICO 1 800 682 3180 http www samsung com REP DOMINICA 1 800 751 2676 http www samsung com TRINIDAD amp TOBAGO 1 800 SAMSUNG 726 7864 http www samsung com VENEZUELA 0 800 100 5303 http www samsung com EUROPE AUSTRIA 0810 SAMSUNG 7267864 0 07 min http www samsung com BELGIUM 02 201 24 18 http www samsung com be Dutch http www samsung comibe fr French CZECH 800 SAMSUNG 800 726786 http www samsung com Distributor pro Ceskou republiku Samsung Zit Ceska organiza n slo ka Oasis Florenc Sokolov ska394117 180 00 Praha 8 DENMARK 70 70 19 70 http www samsung com EIRE 0818 717100 http www samsung com ESTONIA 800 7267 http www samsung com FINLAND 030 6227 515 http www samsung com FRANCE 01 48 63 00 00 http www samsung com 6 3 More Information EUROPE GERMANY 01805 SAMSUNG 726 7864 0 14 http www samsung com Min HUNGARY 06 80 SAMSUNG 726 7864 http www samsung com ITALIA 800 SAMSUNG 726 7864 http www samsung com LATVIA 8000 7267 http www samsung com LITHUANIA 8 800 77777 http www samsung com L
7. 000 31 500 VESA 800 x 600 35 156 96 250 36 000 VESA 800 x 600 37 879 60 317 40 000 VESA 800 x 600 48 077 72 188 50 000 HE VESA 800 x 600 46 875 75 000 49 500 VESA 1024 x 768 48 363 60 004 65 000 VESA 1024 x 768 56 476 70 069 75 000 VESA 1024 x 768 60 023 75 029 78 750 VESA 1152 x 864 67 500 75 000 108 000 VESA 1280 x 800 49 702 59 810 83 500 VESA 1280 x 960 60 000 60 000 108 000 VESA 1280 x 1024 63 981 60 020 108 000 VESA 1280 x 1024 79 976 75 025 135 000 VESA 1440 x 900 55 935 59 887 106 500 VESA 1440 x 900 70 635 74 984 136 750 VESA 1600 x 1200 75 000 60 000 162 000 VESA 1680 x 1050 65 290 59 954 146 250 VESA 1920 x 1200 74 038 59 950 154 000 Horizontal Frequency The time taken to scan one line from the left most position to the right most position on the screen is called the horizontal cycle and the reciprocal of the horizontal cycle is called the horizontal frequency The horizontal frequency is represented in kHz Vertical Frequency A panel must display the same picture on the screen tens of times every second so that humans can see the picture This frequency is called the vertical frequency The vertical frequency is represented in Hz Using the product 3 2 3 3 Installing the Device Driver If you install the device driver you can set up the appropriate resolution and frequency for the product The device driver is included on t
8. 4 TROUBLESHOOTING Monitor Self Diagnosis 00 cece ee 5 1 Before Requesting Service eee ee 5 2 KAPA APA 5 3 MORE INFORMATION Specifications cua KA AK KBK KAANAK s ORO OTE 6 1 Power Saving Function ana 0 EN cee te PRAAN KNA ANA NG AN 6 2 Contact SAMSUNG WORLDWIDE 0 00 es 6 3 Correct Disposal of This Product Waste Electrical 4 Electronic Equipment Europe only 6 4 1 Major Safety Precautions 1 1 Before You Start Icons used in this manual ICON NAME MEANING GB Caution Indicates cases where the function may not work or the setting may be canceled Note Indicates a hint or tip to operate a function Using this Manual e Make yourself fully aware of the safety precautions before using this product e If a problem occurs refer to the Troubleshooting section Copyright Notice The contents of this manual are subject to change without prior notice for performance improvement Copyright 2010 Samsung Electronics Co Ltd All Rights Reserved The copyright of this manual is reserved by Samsung Electronics Co Ltd The contents of this manual may not be partially or in whole reproduced distributed or used in any form without the written permission of Samsung Electronics Co Ltd The SAMSUNG logo and SyncMaster are the registered trademarks of Samsung Electronics Co Ltd Microsoft Windows and Windows NT are the registered trademarks of Microsoft Corpo
9. 8282 1800 266 8282 INDONESIA 0800 112 8888 http www samsung com 021 5699 7777 JAPAN 0120 327 527 http www samsung com MALAYSIA 1800 88 9999 http www samsung com NEW ZEALAND 0800 SAMSUNG 0800 726 786 http www samsung com PHILIPPINES 1 800 10 SAMSUNG 726 7864 http www samsung com 1 800 3 SAMSUNG 726 7864 1 800 8 SAMSUNG 726 7864 02 5805777 SINGAPORE 1800 SAMSUNG 726 7864 http www samsung com TAIWAN 0800 329 999 http www samsung com THAILAND 1800 29 3232 http www samsung com 02 689 3232 VIETNAM 1 800 588 889 http www samsung com MIDDLE EAST amp AFRICA BAHRAIN 8000 4726 JORDAN 800 22273 SOUTH AFRICA 0860 SAMSUNG 726 7864 http www samsung com TURKEY 444 77 11 http www samsung com U A E 800 SAMSUNG 726 7864 http www samsung com 6 3 More Information 6 4 Correct Disposal of This Product Waste Electrical amp Electronic Equipment Europe only Applicable in the European Union and other European countries with separate collection systems This marking on the product accessories or literature indicates that the product and its electronic accessories e g charger headset USB cable should not be disposed of with other household waste at the end of their working life To prevent possible harm to the environment or human health from uncontrolled waste disposal please sepa rate these items from other types of waste and recycle them responsibly to promote the sustainable reuse of mate rial reso
10. Player Real Player etc are not displaying movie files properly in 90 180 and 270 orientations then do the following e Close the application e Select the Orientation 90 180 270 you want to view the application e Relaunch the application In most cases this should fix the problem 3 User Applications using OpenGL and DirectDraw 3D drawing will not function as per the orientation mode selected 90 180 270 e g 3D games DOS based applications in Full Screen Mode will not function as per the orientation mode selected 90 180 270 Dual is not supported in Windows 98 ME NT 4 0 MagicRotation does not provide support for 24 bits per pixel Bit depth Color Quality DI DA SS If you are changing your Graphic Card it is recommended that you uninstall the MagicRotation Software before doing so System Requirements Os e Windows 98 SE e Windows Me e Windows NT 4 0 e Windows 2000 e Windows XP Home Edition Installing the Software 4 3 e Windows XP Professional e Windows Vista 32Bit e Windows 7 32Bit For MagicRotation Windows 2000 or later is recommended Hardware e Atleast 128MB of memory recommended e Atleast 25MB of free space on the hard disk drive Service Packs e It is recommended that your System has the latest Service Pack installed e For Windows NT 4 0 it is recommended to install Internet Explorer 5 0 and above with Active Desktop component ce For more information refe
11. UNKNOWN MONITOR PLUG amp PLAY VESA DDC MONITOR FOUND MESSAGE IS DISPLAYED Did you install the device driver for the product Check if all the Plug amp Play VESA DDC functions are sup ported referring to the User Manual of the graphics card Install the device driver referring to the descriptions about the driver installation Install the device driver referring to the descriptions about the driver installation WHEN LOOK AT THE EXTERIOR EDGES OF THE PRODUCT SMALL ALIEN SUBSTANCES APPEAR ON IT Since this product is designed so that the color has a soft appearance by coating it with a transparent material over the black edges such things may be seen This is not a defect of the product A BEEP BEEP SOUND IS HEARD WHEN BOOTING THE COMPUTER If the beep sound is generated 3 or more times when booting up the computer please request service for the computer 5 2 Troubleshooting 5 3 FAQ FAQ PLEASE TRY THE FOLLOWING How can change the frequency refresh rate of the video signal You have to change the frequency of the graphics card Windows XP Change the frequency by selecting Control Panel Appearance and Themes Display Settings Advanced Monitor and then change the refresh rate under Monitor Settings Windows ME 2000 Change the frequency by selecting Con trol Panel Display Settings Advanced Monitor and then change the refresh rate
12. a PO si If the product is working properly the lt Check Signal Cable gt message appears In this case if a blank screen is displayed again make sure that there is no problem with the PC and the connection The product is working properly 5 1 Troubleshooting 5 2 Before Requesting Service Please check the following before requesting After Sales service If the problem continues please contact your nearest Samsung Electronics Service Center A BLANK SCREEN APPEARS CANNOT TURN THE PRODUCT ON Is the power cord connected properly Is the lt Check Signal Cable message displayed on the screen Is the lt Not Optimum Mode message displayed on the screen Check the connection status of the power cord Check the cable connecting the PC and the product If the message appears on the screen even if the cable is properly connected recheck the input signal by pressing the CV button of the product This occurs when the signal from the graphics card exceeds the maximum resolution or the maximum frequency of the product In this case set up the appropriate resolution and the fre quency for the product Is a blank screen displayed and does the power LED blink at a 1 second interval This occurs when the power saving function is running If you click the mouse or press any key the screen will be turned on Did you connect with a DVI cable If you connect the DVI cable when the PC
13. fire e Otherwise it may result in fire electric shock or a problem with the product Major Safety Precautions 1 3 A Caution Avoid spraying cleansing agent directly onto the product e This may result in discoloration or cracking of the exterior of the product or the panel coming off Use a soft cloth dampened with a monitorexclusive cleansing agent and wipe the product with it e f no monitor exclusive cleansing agent is available dilute a cleansing agent with water at a ratio of 1 10 before cleaning the product Usage Related A Warning Since a high voltage runs through the product never disassemble repair or modify the product yourself e Otherwise it may result in fire or electric shock e If the product needs to be fixed contact a service center If the product generates a strange noise a burning smell or smoke unplug the power plug immediately and contact a service cen ter e Otherwise it may result in electric shock or fire If you drop the product or the case is dam aged turn the power off and unplug the power cord Contact a service center e Otherwise it may result in fire or electric shock When thunder or lighting occurs unplug the power cord and under no circumstance touch the antenna cable as this is dangerous e Otherwise it may result in electric shock or fire When cleaning the product disconnect the power cord and clean the pro
14. has booted up or if you reconnect the DVI cable after disconnecting the cable while using a PC the screen may not be displayed because some graphics cards do not output the video signal In this case reboot the PC while the DVI cable is connected THE IMAGE IS TOO LIGHT OR TOO DARK Adjust the lt Brightness gt and lt Contrast gt Refer to the lt Brightness gt lt Contrast gt The display brightness can differ according to the mode set for lt MagicAngle gt If lt MagicBright gt is set to lt Dynamic Contrast gt the display brightness can differ according to the input signal THE ON SCREEN ADJUSTMENT MENU OSD DOES NOT APPEAR Did you cancel the screen adjustment Check if the OSD Adjustment Lock function is set to Off THE COLOR IS WEIRD THE PICTURE IS DISPLAYED IN BLACK AND WHITE Is the entire screen displayed in the same color as if viewing the screen through a cellophane paper Check the cable connection to the computer Reinsert the graphics card into the computer completely Check if the lt Color Effect gt is set to lt Off gt Is the graphics card configured correctly Set up the graphics card referring to the user manual THE DISPLAY AREA SUDDENLY MOVES TO AN EDGE OR TO THE CENTER Did you change the graphics card or the driver Please press the AUTO button to run the auto adjustment function Did you change the resolution and frequency appropriate to th
15. may fall and this may result in injury Avoid placing a heavy object over the product e Otherwise it may result in a problem with the product or injury Maintaining the Correct Posture when Using this Product Maintain the correct posture when using this product e Straighten your back e Keep a distance of 45 50 cm from your eyes to the screen Look down at the screen and face the screen forwards e Adjust the angle of the product so that light is not reflected onto the screen e Keep your elbow at a right angle and keep your arm level with the back of your hand e Keep your elbow at a right angle e Place your heels flat on the ground while keeping your knees at an angle of 90 degrees or higher and maintain the position of your arm so that your arm is below your heart 1 3 Major Safety Precautions 2 installing the Product 2 1 Package Contents e Unpack the product and check if all of the following contents have been included e Store the packaging box in case you need to move the Product later e If any items are missing contact your dealer e Contact a local dealer to purchase optional items Type 1 Monitor and HAS stand Type 2 Monitor and HAS USB stand CONTENTS Pa il Installation Manual Product Warranty User Manual D Sub Cable Not available in all locations Power Cord Cleaning Cloth Cable holding ring Installing the Product 2 1 OPTIONAL PARTS
16. menu is unavailable when lt MagicEco gt is set Controls the contrast of the pictures displayed on the screen This menu is unavailable when lt MagicBright gt is set to lt Dynamic Contrast gt or lt Cinema gt Contrast mode e This menu is unavailable when lt MagicColor gt is set to lt Full gt mode or lt Intelligent gt mode e This menu is unavailable when lt Color Effect gt is set Controls the clarity of details of pictures displayed on the screen This menu is unavailable when lt MagicBright gt is set to lt Dynamic Contrast gt or lt Cinema gt Sharpness mode e This menu is unavailable when lt Color Effect gt is set e This menu is unavailable when lt MagicColor gt is set to lt Full gt mode or lt Intelligent gt mode Using the product 3 5 Menu Description MagicBright Provides preset picture settings optimized for various user environments such as editing a document surfing the Internet playing games or movies and so on e lt Custom gt If the preset picture modes are not sufficient users can configure the lt brightness gt and lt Contrast gt directly using this mode e lt Standard gt This mode provides the picture setting appropriate for editing a document and surfing the Internet text picture e lt Game gt This mode provides the picture setting appropriate for playing games that include lots of graphics and that require a fast screen refresh rate e lt Cinema gt
17. under Monitor Settings Windows Vista Change the frequency by selecting Control Panel Appearance and Personalization Personalization Display settings Advanced settings Monitor and then change the refresh rate under Monitor Settings Windows 7 Change the frequency by selecting Control Panel Appearance and Personalization Display Adjust reso lution Advanced settings Monitor and then change the refresh rate under Monitor Settings For more information refer to the User Manual of the com puter or the graphics card How can change the resolution Windows XP Change the resolution by selecting Control Panel Appearance and Themes gt Display Settings Windows ME 2000 Change the resolution by selecting Con trol Panel Display Settings Windows Vista Change the resolution by selecting Control Panel Appearance and Personalization Personalization Display settings Windows 7 Change the resolution by selecting Control Panel Appearance and Personalization Display Adjust reso lution For more information refer to the User Manual of the com puter or the graphics card How can use the power saving function Windows XP Configure it by selecting Control Panel Appearance and Themes Display Screen Saver Setting or configure it in the BIOS Setup of the computer Windows ME 2000 Configure it by selecting Control Panel
18. 2 3 Installing the Product 2 4 Connecting with a PC The connecting part may differ depending on the product model 1 Connect the product to a PC depending on the video output supported by the PC e When the graphics card provides D Sub lt Analog gt output e Connect the RGB IN port of the product to the D Sub port of the PC with the D Sub cable SAMSUHG e When the graphics card provides DVI lt Digital gt output e Connect the DVI IN port of the product to the DVI port of the PC with the DVI cable cee ils l 4 TE T F 2 Connect one end of the power cord to the POWER port of the product and connect the other end of the power cord to the 110V or 220V wall outlet The input voltage is switched automatically SABEEU RIG Installing the Product 2 4 When the product is connected to a PC you can turn the product on and use it POWER ON OFF Switches the Power On Off PLA FILE 2 4 Installing the Product 2 5 Connecting the DP Cables FAMEUKG Connect the DP IN ports of the PC and all the installed monitors using DP cables Installing the Product 2 5 2 6 Connecting USB Applicable to the stand models that have USB ports only You can use a USB device such as a mouse keyboard Memory Stick or external hard disk drive by connecting them to the DOWN port of the monitor without connecting them to the PC The USB port of
19. Q Do not disassemble Q Do not touch ab Power Related Must be followed The power plug must be unplugged from the wall outlet Must be grounded to prevent electric shock The product image used in the following pictures for your reference may look different from the actual product A Warning Avoid using a damaged power cord or plug or a loose power outlet e Otherwise it may result in electric shock or fire O Avoid plugging in or unplugging the power supply with wet hands e Otherwise it may result in electric shock o Make sure to connect the power cord to a grounded wall outlet for insulation class 1 equipment only e Otherwise it may result in electric shock O D or injury Keep the power cord and the product away from a heater w e Otherwise it may result in electric shock O or fire Avoid connecting multiple electric appliances to a single wall outlet e Otherwise it may result in fire due to overheating of the wall outlet Plug the power plug in firmly e Otherwise it may result in fire Avoid bending or twisting the power cord excessively and avoid placing heavy objects on the cord e Otherwise it may result in electric shock or fire due to a damaged power cord If the pins of the power plug or the wall outlet are covered in dust clean it using a dry cloth e Otherwise it may result in fire Major Safety Precautions A Caution Avo
20. SyncMaster 2243DW 2443DW LCD Monitor User Manual The color and the appearance may differ depending on the product and the specifications are subject to change without prior notice to improve the performance Samsung Table Of Contents MAJOR SAFETY PRECAUTIONS BGClIOle YOU Stall sec di Cm NG ee aed ee ew ee TO AA KAN 1 1 Custody and Maintenance 0 0 0 cee es 1 2 Safety Precautions 660 AB AA NN eee eee ewe eee PAA KENA 1 3 INSTALLING THE PRODUCT Package Contents ccc es 2 1 Installing the Stand x4 naa nmng KELAN seo e PMA ee es 2 2 Installing the Stand for the Wall Mount 2 3 Connecting witha PC an 2 4 Connecting the DP Cables 2 2 aan 2 5 Connecting USB pax ete teed eee es tee ee eee es tee es RAANG 2 6 Kensington LOCK csctaevtacdecudortred ee eid ec ead sede et eae 2 7 USING THE PRODUCT Setting the Optimal Resolution 0c es 3 1 Standard Signal Mode Table 00 0 ee 3 2 Installing the Device Driver 000 eee eee 3 3 Product Operating Buttons 0 00 ce ee 3 4 Using the Screen Adjustment Menu OSD On Screen Display 3 5 INSTALLING THE SOFTWARE Natural COO csu asa ised ost oe betwee bn deen eee Po ew eee os 4 1 Magic TINE casiactotede eirag u r nee an hee bee eee ee ee 4 2 MagicRotation fection eee eee we eee ee La eee eee ae 4 3 MUNISCICOI a o aeoea paya REMAKE AA AA ge on eee NAL ee 4
21. This menu is unavailable when lt MagicAngle gt is set e This menu is unavailable when lt Color Effect gt is set You can change the overall atmosphere by changing the color of pictures e lt Off gt Turns the lt color effect function off e lt Grayscale gt Displays pictures in black and white e lt Green gt Displays pictures in green mono color Color Effect e lt Aqua gt Displays pictures in aqua mono color e lt Sepia gt Displays pictures in sepia mono color This menu is unavailable when lt MagicAngle gt is set e This menu is unavailable when lt MagicColor gt is set Using this menu you can change the intensity of the colors of medium brightness e sMode17 lt Mode2 gt lt Mode3 gt Gamma This menu is unavailable when lt MagicAngle gt is set Using the product This is unavailable when lt MagicBright gt is set to Dynamic Contrast gt and lt Cinema gt mode SIZE amp POSITION PICTURE H Position V Position COLOR Image Size SIZE amp POSITION Menu H Position Menu V Position SETUPERESET INFORMATION Menu H Position Description Moves the position of the display area on the screen horizontally e This function is only available in Analog mode e When TV signal is input in AV mode select lt Screen Fit gt to adjust horizontal position in 0 6 levels V Position Moves the position of the display area on the screen vertically This function
22. UXEMBURG 261 03 710 http www samsung com NETHERLANDS 0900 SAMSUNG 0900 7267864 E http www samsung com 0 10 Min NORWAY 815 56 480 http www samsung com POLAND 0 801 1SAMSUNG 172678 http www samsung com 022 607 93 33 PORTUGAL 80820 SAMSUNG 726 7864 http www samsung com SLOVAKIA 0800 SAMSUNG 726 7864 http www samsung com SPAIN 902 1 SAMSUNG 902 172 678 http www samsung com SWEDEN 0771 726 7864 SAMSUNG http www samsung com SWITZERLAND 0848 SAMSUNG 7267864 CHF 0 08 http www samsung com ch min http www samsung com ch fr French U K 0845 SAMSUNG 7267864 http www samsung com CIS ARMENIA 0 800 05 555 AZERBAIJAN 088 55 55 555 BELARUS 810 800 500 55 500 GEORGIA 8 800 555 555 KAZAKHSTAN 8 10 800 500 55 500 KYRGYZSTAN 00 800 500 55 500 http www samsung com MOLDOVA 00 800 500 55 500 RUSSIA 8 800 555 55 55 http www samsung com TADJIKISTAN 8 10 800 500 55 500 http www samsung com UKRAINE 0 800 502 000 http www samsung com ua http www samsung com ua ru UZBEKISTAN 8 10 800 500 55 500 http www samsung com ASIA PACIFIC AUSTRALIA 1300 362 603 http www samsung com CHINA 400 810 5858 http www samsung com 010 6475 1880 HONG KONG 852 3698 4698 http www samsung com hk http www samsung com hk en More Information 6 3 ASIA PACIFIC INDIA 3030 8282 http www samsung com 1800 110011 1800 3000
23. c shock or fire Connect the power plug to a wall outlet that can be easily reached e When a problem occurs with the product you must unplug the power plug to cut the power off completely You cannot cut the power off completely using only the power button on the product Ask an installation engineer or relevant company to install the product onto the wall e Otherwise it may result in injury e Make sure to use the specified wall mount Keep a distance of at least 10 cm from the wall when installing the product for ventilation e Otherwise it may result in fire due to internal over heating Avoid installing the product in a location that is unstable or exposed to excessive vibrations such as on an unstable or slanted shelf e The product may fall and this may result in damage to the product or injury e If you use the product in a location exposed to excessive vibrations it may result in a problem with the product or fire Avoid installing the product in a location exposed to direct sunlight and installing the product near a heat source such as a fire or heater e This may shorten the product life cycle or cause fire 1 3 Major Safety Precautions A Caution Do not let the product drop while moving it Do not place the product face down on the e This may result in a problem with the TX floor product or injury L e This may damage the panel of the O product When putting the product d
24. ce caused by using an unauthorized cable for the connection e Some products do not follow the USB standard and it may cause a malfunction of the device e If the device malfunctions even if it is connected to the computer contact the service center of the device computer Installing the Product 2 6 2 7 Kensington Lock A Kensington Lock is an anti theft device that enables users to lock the product so that they can safely use it in public locations Since the shape and usage of the locking device may differ depending on the model and the manufacturer for more information refer to the User Manual supplied with the locking device for more information You must purchase the Kensington Lock separately PEEL LEG To lock the product follow these steps 1 Wrap the Kensington lock cable around a large stationary object such as a desk or chair 2 Slide the end of the cable with the lock attached through the looped end of the Kensington lock cable 3 Insert the locking device into the Kensington slot on the Monitor 4 Lock the lock e These are general instructions For exact instructions see the User Manual supplied with the locking device e You can purchase the locking device from an electronics store an online shop or our service center 2 7 Installing the Product 3 Using the product 3 1 Setting the Optimal Resolution If you turn the power on after purchasing the product a message regardi
25. duct with a soft dry cloth e Avoid using chemicals such as wax benzene alcohol thinner mosquito repellent fragrance lubrication or cleansing agent when cleaning the product This may result in the exterior being deformed or the print being removed Because the exterior of the product is easily scratched be sure to use a proper cleansing cloth However if the cloth is contaminated by alien substances it may result in scratches to the exterior therefore shake off any alien substances from the cloth before using it When cleaning the product do not spray water directly over the product parts e Make sure that water does not enter the product e Otherwise it may result in fire electric shock or a problem with the product Avoid letting children to hang or climb onto the product e Otherwise it may result in the product falling and this may result in injury or death Avoid placing objects such as toys and cookies on top of the product e Ifa child hangs over the product to grab an object the object or the product may fall and this may result in injury or even death Avoid dropping an object over the product or cause impact to the product e Otherwise it may result in electric shock or fire 1 3 Major Safety Precautions Avoid moving the product by pulling the power cord or antenna cable e Otherwise it may result in electric shock fire or a problem with the product
26. due to damage to the cable Avoid lifting up or move the product by holding only the power cord or signal cable e Otherwise it may result in electric shock fire or a problem with the product due to damage to the cable Take care not to block the vent by a table cloth or curtain e Otherwise it may result in fire due to internal overheating Avoid placing a liquid container such as a vase flowerpot beverage cosmetics or drugs ora metal object over the product e lf water or an alien substance enters the product turn the power off unplug the power cord and contact a service center e Otherwise it may result in a problem with the product electric shock or fire A Caution Displaying a still image for a long time may create a persistent image or stain on the screen e If you do not use the product for a long time use the power saving mode or set the screensaver to the moving picture mode Set the appropriate resolution and frequency for the product e Otherwise it may result in eye strain Watching the product from too close a distance continuously may damage your eyesight It is important to give your eyes some rest 5 minutes every hour when viewing the product screen for long periods of time e This will alleviate any eye strain When a gas leak occurs do not touch the product or the power plug and ventilate immediately e Aspark may result in an explosion or fire e D
27. e product Set the resolution and the frequency to the appropriate values in the graphics card refer to the Standard Signal Mode Table Is the graphics card configured correctly Set up the graphics card referring to the user manual Troubleshooting 5 2 THE PICTURES ARE OUT OF FOCUS Did you change the resolution and the frequency appropriate to the product Set the resolution and the frequency to the appropriate values in the graphics card refer to the Standard Signal Mode Table THE COLOR IS DISPLAYED IN 16 BIT 16 COLORS THE COLOR HAS BEEN CHANGED AFTER CHANGING THE GRAPHICS CARD Did you install the device driver for the product Windows XP Set the color again by selecting Control Panel Appearance and Themes Display Settings Windows ME 2000 Set the color again by selecting Control Panel Display Settings Windows Vista Change the color settings by selecting Con trol Panel Appearance and Personalization Personaliza tion Display settings Windows 7 Change the color settings by selecting Control Panel Appearance and Personalization Display gt Adjust resolution Advanced settings Monitor For more information refer to the Windows user manual for the computer Is the graphics card configured correctly Configure the color again in accordance with the new graph ics card driver WHEN I CONNECT THE MONITOR THE
28. he CD ROM supplied with the product If the supplied drive file is corrupted please visit a service center or Samsung Electronics website http www samsung com and download the driver Insert the driver installation CD ROM into the CD ROM drive Click on Windows Driver Complete the remaining installation steps according to the instructions displayed on the screen gt pP uN Select the model of your product from the model list T SAASUNG monitor inetalhar Select the display adapter on which you wart to inlell te monitor Selec the momor which you want bo inatali 5 Check if the appropriate resolution and screen refresh rate are displayed in the Control Panel settings For more information refer to the document about the Windows operating system 3 3 Using the product 3 4 Product Operating Buttons Product Operating Buttons Touch them lightly with your fingers to use them ICON DESCRIPTION MENU Press this button to view the On Screen Display OSD This button is also used to exit the OSD or to return to a higher level OSD menu OSD Adjustment Lock This function locks the OSD in order to maintain the current settings or to prevent the settings from being changed by another person On If you press and hold the MENU button down for 5 seconds the OSD Adjustment Lock function is activated Off If you press and hold the MENU button down for 5 seconds again the OSD Adjustment Lock function
29. id unplugging the power plug while the product is operating e Otherwise it may damage the product due to electric shock When unplugging the power plug from the wall outlet make sure to hold it by the plug and not by the cord e Otherwise it may result in electric shock or fire Installation Related A Warning Avoid placing burning candles mosquito repellent or cigarettes on the product and installing the product near a heater e Otherwise it may result in fire Avoid installing the product in a badly ventilated location such as inside a bookshelf or closet e Otherwise it may result in fire due to internal over heating Keep the plastic bags used to pack the product away from children e If children place the plastic bags over their heads they may suffocate Avoid installing the product in a location exposed to dust moisture Sauna oil smoke or water rain drops and installing it within a vehicle e This may result in electric shock or fire Avoid installing the product at an easily reachable height where children may reach it e Ifa child touches the product the product may fall and this may result in injury e Since the front part is heavier install the product on a flat and stable surface Make sure to use only the power cord supplied by our company In addition do not use the power cord of another electric appliance e Otherwise it may result in electri
30. ight gt is set to lt Dynamic Contrast gt mode You can turn the Off Timer on or off Off Timer On Off e lt Off gt lt On gt Turns the power off automatically when the configured time is reached Off Timer Setting When lt On gt of lt Off Timer On Off gt is selected This function is available only Customized Key You can set the function of the Customized Key to one of the following lt MagicBright gt lt MagicAngle gt lt MagicEco gt sImage Size Auto Source e lt Auto gt The monitor automatically selects an input signal e lt Manual gt Users have to manually select an input signal 3 5 Using the product Menu Description Display Time You can determine the time to wait before the OSD is hidden e lt 5 sec gt s10 sec lt 20 sec s200 sect The OSD automatically disappears if no action is taken by the user Set to PC when connected to a PC Set to AV when connected to an AV device PC AV Mode e This function does not support Analog mode e Supplied for the wide models only such as 16 9 or 16 10 You can select the transparency of the OSD Menu Transparency oft D e lt Off gt lt On gt CJ INFORMATION PICTURE COLOR SIZE amp POSITION SETUPERESET INFORMATION Menu Description INFORMATION Shows the frequency and resolution set on the PC Using the product 3 5 4 Installing the Software 4 1 Natural Col
31. is disabled Even if the OSD Adjustment Lock function is activated users can adjust the brightness and contrast and can set up the adjustment function assigned to the pj A V Use these buttons to navigate the menu or to adjust a value in the OSD Use this button to control the brightness of the screen Users can set the Customized Key to one of the following functions If the user presses the Customized Key pj after setting it the configured function will be performed e lt MagicBright gt lt MagicAngle gt lt MagicEco gt sImage Size You can set the function of the Customized Key by selecting lt SETUP amp RESET gt gt lt Customized Key in the OSD CNC Use this button to select a function If you press the OH button when there is no OSD the input signal Analog Digital DP is switched When the input signal is switched by pressing O6 button or the product is turned on a message displaying the selected input signal appears at the top left of the screen e To select Digital mode you have to connect the product and the PC with the DVI cable e To select DP mode you have to connect the product and the PC with the DP cable Using the product 3 4 ICON DESCRIPTION Press AUTO button to adjust the screen settings automatically AUTO This function is only available in Analog mode If the resolution settings are changed in the Display Properties the AUTO adjustment f
32. is only available in Analog mode e When TV signal is input in AV mode select lt Screen Fit gt to adjust vertical position in 0 6 levels Image Size Supplied for the wide models only such as 16 9 or 16 10 PC signals e lt Auto gt The picture is displayed at the aspect ratio of the input signal e lt Wide gt The picture is displayed in full screen regardless of the aspect ratio of the input signal Asignal not in the standard mode table is not supported e Ifthe resolution is set to the optimal resolution the aspect ratio does not change whether the lt Image Size is set to lt Auto gt or lt Wide gt AV signals e lt 4 3 gt Displays pictures at the 4 3 aspect ratio e lt 16 9 gt Displays pictures at the 16 9 aspect ratio e lt Screen Fit gt If a 720P 1080i or 1080P signal is input in DVI input mode the picture is displayed as is without truncation This can only be set when the external input is connected through DVI and lt PC AV Mode is set to lt AV gt e lt 4 3 gt Displays pictures at the 4 3 aspect ratio e lt wide gt Displays pictures at the 16 10 aspect ratio e Screen Fit gt If a 720P 1080i or 1080P signal is input in DVI input mode the picture is displayed as is without truncation gt Itcan only be selected if an external input is connected to the DVI terminal and the lt PC AV Mode is set to lt AV gt e When the panel is of 16 10 the scree
33. llation steps according to the instructions displayed on the screen The software may not work properly if you do not restart the computer after the installation e The MultiScreen icon may not appear depending on the computer system and the product specifications e If the shortcut icon does not appear press the F5 key Restrictions and Problems with the Installation MultiScreen The MultiScreen installation may be affected by the graphics card motherboard and the networking environment Operating System OS eWindows 2000 eWindows XP Home Edition Windows XP Professional eWindows Vista 32Bit Windows 7 32Bit For MultiScreen the operating systems Windows 2000 or later is recommended Hardware eAt least 32MB of memory eAt least 60MB of free space on the hard disk drive Removing the Software Click Start select Settings Control Panel and then double click Add or Remove Programs Select MultiScreen from the program list and click the Add Delete button Installing the Software 4 4 5 Troubleshooting 5 1 Monitor Self Diagnosis e You can check if the product is working properly using the Self Diagnosis function e Ifa blank screen is displayed and the Power LED blinks even if the product and the PC are properly connected perform the self diagnosis function according to the procedures below Turn the product and the PC off Separate the signal cable from the product Turn the product on pm
34. n size options include lt 4 3 gt lt wide gt lt Screen fits Using the product 3 5 Menu Description Menu H Position You can adjust the horizontal position of the OSD Menu V Position You can adjust the vertical position of the OSD EJ SETUP amp RESET J PICTURE Reset Language COLOR weed MagicEco SIZE amp POSITION Of Timer On Off Off Timer Setting SETUPERESET Customized Key INFORMATION Auto Source F a DN ET a T k a Menu Description a Use this function to restore the visual quality and color settings to the factory defaults ese e lt No gt lt Yes gt Select a language for the OSD English Deutsch Espanol Fran ais Italiano Svenska Language Pycckun Portugu s T rk e Polski Magyar The selected language is only applied to the product OSD This setting does not affect the other functions of the PC This function provides user a low power mode which is realized by lowering the current of the display panel e lt 100 gt When lt 100 gt is selected the power consumption is 100 of default setting e lt 75 gt When lt 75 gt is selected the power consumption is about 75 of default setting MagicEco e lt 50 gt When lt 50 gt is selected the power consumption is about 50 of default setting e Power Saving Off gt When lt Power Saving Off gt is selected the function is turned Off This menu is unavailable when lt MagicBr
35. ng the optimal resolution setting appears on the screen Select a language and the optimal resolution A V You can select a language with these buttons MENU If you press this button the message disappears e It can be displayed up to one 1 times Make sure to adjust the resolution of your PC before reaching the maximum count e To set the resolution to the optimal resolution e When the PC is turned off connect the product and the PC and turn the power on e Right click over the Desktop and select Properties from the pop up menu e Inthe Settings tab set the resolution to the optimal resolution Using the product 3 1 3 2 Standard Signal Mode Table The LCD monitor has one optimal resolution for the best visual quality depending on the screen size due to the inherent characteristics of the panel unlike for a CDT monitor Therefore the visual quality will be degraded if the optimal resolution is not set for the panel size It is recommended setting the resolution to the optimal resolution of the product If the signal from the PC is one of the following standard signal modes the screen is set automatically However if the signal from the PC is not one of the following signal modes a blank screen may be displayed or only the Power LED may be turned on Therefore configure it as follows referring to the User Manual of the graphics card
36. onitor automatically returns to normal operation when you press a key on the keyboard For energy conservation turn your monitor OFF when it is not needed or when leaving it unattended for long periods The PowerSaver system operates with a VESA DPM compliant video card installed in your computer Use the software utility installed on your computer to set up this feature STATE NORMAL OPERATION POWER SAVING MODE POWER OFF Power Indicator On Blinking Off 2243DW 28 W Power Consumption Less than 1 watts Less than 1 watts 2443DW 47 W If there is no power cut off switch the power consumption is O only when the power cord is disconnected More Information 6 2 6 3 Contact SAMSUNG WORLDWIDE e Ifyou have any questions or comments relating to Samsung products please contact the SAMSUNG customer care center NORTH AMERICA U S A 1 800 SAMSUNG 726 7864 http www samsung com CANADA 1 800 SAMSUNG 726 7864 http www samsung com MEXICO 01 800 SAMSUNG 726 7864 http www samsung com LATIN AMERICA ARGENTINA 0800 333 3733 http www samsung com BRAZIL 0800 124 421 http www samsung com 4004 0000 CHILE 800 SAMSUNG 726 7864 http www samsung com COLOMBIA 01 8000112112 http www samsung com COSTA RICA 0 800 507 7267 http www samsung com ECUADOR 1 800 10 7267 http www samsung com EL SALVADOR 800 6225 http www samsung com GUATEMALA 1 800 299 0013 http
37. or What is Natural Color This software works only for Samsung products and enables adjusting the displayed colors on the product and matches the colors on the product with the colors of the printed pictures For more information refer to the online help of the software F1 The Natural Color is provided online You can download it from the website below and install http www samsung com us consumer learningresources monitor naturalcolorexpert pop download htmil 4 1 Installing the Software 4 2 MagicTune What is MagicTune MagicTune MagicTune is a software program that helps with monitor adjustments by providing comprehensive descriptions of monitor functions and easy to understand guidelines Users can adjust the product with the mouse and the keyboard without using the operating buttons of the product Available in Digital mode only Installing the Software 1 Insert the installation CD into the CD ROM drive 2 Select the MagicTune setup program If the pop up screen for the software installation does not appear on the main screen find and double click the MagicTune setup file on the CD ROM 3 Select the installation language and click Next 4 Complete the remaining software installation steps according to the instructions displayed on the screen e The software may not work properly if you do not restart the computer after the installation e The MagicTune icon may not appear depending on the comp
38. own handle it When installing the product on a console or IF gently shelf make sure that the front of the product does not protrude out of the console or shelf Otherwise it may result in a problem e Otherwise this may cause the product with the product or injury to fall off and result in a malfunction or injury e Make sure to use a cabinet or shelf suitable to the size of the product If the product is installed in a location where the operating conditions vary considerably a serious quality problem may occur due to the surrounding environment In this case install the product only after consulting one of our service engineers about the matter e Places exposed to microscopic dust chemicals too high or low temperature high humidity such as airports or stations where the product is continuously used for a long time and so on Cleaning Related Since using a surfactant which contains a large amount of alcohol solvent or other strong chemicals may result in the discoloration or cracking of the product exterior or the panel surface coming off be sure to use the recom mended cleansing agent only You can purchase the recommended cleansing agent from a service center Before cleaning the product unplug the power When cleaning the product do not spray water cord directly over the product parts e Make sure that water does not enter the product e Otherwise it may result in electric shock or
39. r e This menu is unavailable when sMagicAngle is set e This menu is unavailable when lt Color Effect is set You can adjust the red color value of pictures according to your preference Red This menu is unavailable when lt MagicColor gt is set to lt Full gt mode or lt Intelligent gt mode e This menu is unavailable when lt Color Effect is set You can adjust the green color value of pictures according to your preference Green This menu is unavailable when lt MagicColor gt is set to lt Full gt mode or lt Intelligent gt mode e This menu is unavailable when lt Color Effect is set You can adjust the blue color value of pictures according to your preference Blue This menu is unavailable when lt MagicColor gt is set to lt Full gt mode or lt Intelligent gt mode e This menu is unavailable when lt Color Effect is set You can set the color temperature according to your preference e Cool Sets the color temperature of the screen to a cooler color e lt Normal gt Sets the color temperature of the screen to the standard color temperature e lt Warm gt Sets the color temperature of the screen to a warmer color Color Tone e lt Custom gt Select this menu to set the color temperature manually If you do not like the preset color temperatures you can manually adjust the value of RGB This menu is unavailable when lt MagicColor gt is set to lt Full gt mode or lt Intelligent gt mode e
40. r from mower UPR country to country please check the label on the back of the product 15pin to 15pin D sub cable Detachable Signal Cable DVI D to DVI D connector Detachable DP Cable Detachable Dimensions WxHxD Weight Simple stand 505 5 x 331 5 x 67 6 mm 19 9 x 13 1 x 2 7 inches Without Stand 505 5 x 375 4 x 200 0 mm 19 9 x 14 8 x 7 9 inches With Stand 5 7 kg 12 6 Ibs 556 2 x 360 8 x 67 0 mm 21 9 x 14 2 x 2 6 inches Without Stand 556 2 x 432 2 x 250 0 mm 21 9 x 17 0 x 9 8 inches With Stand 7 7 kg 17 0 Ibs VESA Mounting Interface 100 mm x 100 mm 3 9 inches x 3 9 inches Temperature 50 F 104 F 10 C 40 C Operating Environmen Humidity 10 80 non condensing tal consider ations Temperature 4 F 113 F 20 C 45 C Storage Humidity 5 95 non condensing Design and specifications are subject to change without prior notice Class B Information Communication equipment for residential use This device is registered for EMC requirements for home use Class B It can be used in all areas Class B equipment emits less electromagnetic waves than Class A equipment 6 1 More Information 6 2 Power Saving Function This monitor has a built in power management system called PowerSaver This system saves energy by switching your monitor to low power mode when it has not been used for a certain amount of time The m
41. r to the website e Windows is registered trademark of Microsoft Corporation Inc Removing the Software You can only remove MagicRotation through Add or Remove Programs in Windows To remove MagicRotation complete the following steps 1 Click Start select Settings and select Control Panel from the menu For Windows XP click Start and select Control Panel from the menu Double click the Add or Remove Programs icon in the Control Panel In the Add Remove window find and select MagicRotation so that it is highlighted Click Change or Remove Programs to remove the software Select Yes to start removing MagicRotation oo oe a oN Wait until a message box appears informing you that the software has been removed completely For technical support the FAQ frequently asked questions or information about the software upgrade for MagicRotation please visit our website 4 3 Installing the Software 4 4 MultiScreen What is MultiScreen im MultiScreen MultiScreen enables users to use the monitor by partitioning multiple sections Installing the Software 1 Insert the installation CD into the CD ROM drive 2 Select the MultiScreen setup program Ifthe pop up screen for the software installation does not appear on the main screen find and double click the MultiScreen setup file on the CD ROM 3 When the Installation Wizard appears click Next 4 Complete the remaining software insta
42. ration VESA DPM and DDC are the registered trademarks of the Video Electronics Standard Association The ENERGY STAR logo is the registered trademark of the U S Environmental Protection Agency All other trademarks mentioned herein belong to their respective companies Major Safety Precautions 1 2 Custody and Maintenance External Surface and Screen Maintenance Clean the product with a soft dry cloth e Do not clean the product with a flammable substance such as benzene or thinner or clean with a wet cloth This can cause a problem with the product e Do not scratch the screen with your fingernails or a sharp object This can cause permanent scratches and damage to the product e Donot clean the product by spraying water directly onto the product If water enters the product it can cause fire electric shock or a problem with the product e Do not use a supersonic humidifer near the monitor A supersonic humidifier can cause a white stain to appear on the high gloss portions of the product due to the inherent characteristics of the high golss material The appearance and the color may differ depending on the model Securing the Installation Space e Keep the required distances between the product and other objects e g walls to ensure proper ventilation Failing to do so may result in fire or a problem with the product due to an increase in the internal temperature Install the product so the required di
43. stances shown in the figure are kept The appearance may differ depending on the product When installing the product with a stand When installing the product with a wall mount 10cm 293 inches tocm 393inches 10cm 10cm 10cm ilOcm 3 93 inches 93inches 3 93 inches 1 3 93 inches PN Fa I About persistent images e Displaying a still image for a long time can create a persistent image or stain on the screen If you intend to leave the display on but will not use it for a long time set the power saving mode or a screen saver on to protect the screen e Due to technological constraints of the LCD Panel manufacturer the images generated by this product may appear either brighter or darker than normal by appr 1ppm parts per million pixel The number of sub pixels of an LCD panel by size The number of Sub Pixels Max Horizontal Resolution x Max Vertical Resolution x 3 Example If the maximum resolution is 1680 x 1050 the number of sub pixels is 1680 x 1050 x 3 5 292 000 1 2 Major Safety Precautions 1 3 Safety Precautions Icons used for safety precautions ICON NAME MEANING Failing to follow the precautions marked with this sign may result in a serious injury or Caution A naming even a fatality property damage Failing to follow the precautions marked with this sign may result in a personal injury or Meaning of Signs SO Do not perform ap
44. surface to protect the panel and place the product down on the cloth so that the front of the product faces downwards Separate the stand 4 Align the groove of the part of the product that is to be connected to the stand with the groove in the stand desk top stand wall mount stand or another stand and firmly fix the stand by fastening the screw If you use a screw that is longer than the standard specifications the inside of the product may be damaged For wall mounts that are not compatible with the standard VESA specifications the length of the screw may differ depending on the corresponding specifications Do not use screws that are incompatible with the standard VESA specifications and do not assemble them using excessive force This may result in damage to the product or injury due to the product falling The company shall not be held liable for any damage or injury The company shall not be held liable for any damage to the product or injury caused by using a stand that is not compatible with the specified specifications or due to an installation not performed by an authorized installation engineer When installing the product using a wall mount purchase a wall mount that provides at least 10 cm of space from the wall The company shall not be held liable for any problems caused by using a stand that is not compatible with the specified specifications Use the wall mount according to the international specifications
45. t Cinema gt mode e This menu is unavailable when lt MagicColor gt or lt Color Effect is set Using the product Menu Description Removes vertical noise lines line pattern from the screen The location of the screen may be changed after the adjustment In this case move the screen so Coarse that the screen is displayed at the center of the display panel using the lt H Position gt menu This function is only available in Analog mode Removes horizontal noise lines line pattern from the screen If you cannot remove the noise completely with the lt Fine gt function adjust the lt Coarse gt and then Fine use the Fine function again This function is only available in Analog mode Ej COLOR un PICTURE COLOR SIZE amp POSITION SETUPERESET INFORMATION MagicColor Rad Green Blug Color Tone Color Effect Using the product Menu Description Expresses natural colors more clearly without changing the picture quality using proprietary digital picture quality improvement technology developed by Samsung Electronics e lt Off gt Turns the MagicColor function off e Demo You can compare the pictures processed by MagicColor with the original pictures MagicColor e lt Full gt Provides a clearer picture including areas corresponding to skin color e Intelligent Improves the chroma of pictures except for areas corresponding to skin colo
46. the monitor supports High Speed Certified USB 2 0 High speed Full speed Low speed Data Rate 480 Mbps 12 Mbps 1 5 Mbps Power Consumption 2 5 W 2 5 W 2 5 W Max each port Max each port Max each port POL MULI 1 Connect the TF UP port of the monitor and the USB port of the computer with the USB cable e Touse FT DOWN port you have to connect the UP Upstream Cable to the PC e Make sure to use the USB cable supplied with this monitor to connect the monitor s UP port and your computer s USB port b 70 1 2 Connect the TF DOWN port of the USB monitor and a USB device with the USB cable 3 The use procedures are as the same as those for using an external device connecting to the PC e You can connect and use a keyboard and mouse 2 6 Installing the Product e You can play a file from a media device Examples of media devices MP3 digital camera etc e You can run move copy or delete the files on the storage device Examples of storage devices external memory memory card memory reader HDD type MP3 player etc e You can use other USB devices that can be connected to a computer When connecting a device to the FT DOWN port of the monitor connect the device using a cable appropriate to the device e For the purchase of the cable and external devices ask the service center of the corresponding product e The company is not liable for problems or damages to an external devi
47. unc tion is performed Press this button to turn the product on or off Q Power Indicator This light is lit when operating normally and blinks once when your adjustments are saved For more information on the power saving function refer to the power saving function in More Information When not using the product for a long time unplugging the power cord is recommended to minimize power consumption 3 4 Using the product 3 5 Using the Screen Adjustment Menu OSD On Screen Display The Screen Adjustment Menu OSD On Screen Display Structure Top Menus Sub Menus _ PICTURE Brightness Contrast Sharpness MagicBright MagicAngle Coarse Fine Cg COLOR MagicColor Red Green Blue Color Tone Color Effect Gamma SIZE amp POSI H Position V Position Image Size Menu H Position Menu V Position TION JSETUP amp RESE Reset Language MagicEco Off Timer On Off Off Timer Setting T Customized Key Auto Source Display Time PC AV Mode Menu Transpar ency C INFORMA TION Monitor functions may vary according to models Please refer to actual product CJ PICTURE PICTURE Brightness Contrast COLOR Sharpness S 7EXPOSITION MagicBright MagicAngle SETUP amp RESET M CGoars INFORMATION Menu Description Controls the screen brightness Brightness This menu is unavailable when lt MagicBright gt is set to lt Dynamic Contrast gt mode e This
48. urces Household users should contact either the retailer where they purchased this product or their local government office for details of where and how they can take these items for environmentally safe recycling Business users should contact their supplier and check the terms and conditions of the purchase contract This product and its electronic accessories should not be mixed with other commercial wastes for disposal More Information 6 4 6 4 More Information
49. uring a thunder or lighting storm do not touch the power cord or antenna cable Avoid using or placing inflammable spray or objects near the product e This may result in an explosion or fire Avoid inserting metal objects such as a chopsticks coins or hairpins or inflammable objects into the product the vents ports etc e f water or an alien substance enters the product turn the power off unplug the power cord and contact a service center e Otherwise it may result in a problem with the product electric shock or fire When not using the product for a long time such as leaving your home unplug the power cord from the wall outlet e Otherwise it may cause dust accumulation and result in fire caused by overheating or short circuit or result in an electric shock Avoid turning the product upside down or moving the product holding only the stand e This may cause the product to fall resulting in damage to the product or injury Avoid using a humidifier or cooker near the product e Otherwise it may result in electric shock or fire Since the display panel is hot after being on for a long time do not touch the product Major Safety Precautions Keep small accessories away from the children Take care when adjusting the angle of the a product or the height of the stand aa i e If your hand or finger is caught you may be injured e If the product is tilted excessively the product
50. uter system and the product specifications e If the shortcut icon does not appear press the F5 key Restrictions and Problems with the Installation MagicTune The installation of MagicTune may be affected by the graphics card motherboard and the networking environment System Requirements Os eWindows 2000 eWindows XP Home Edition Windows XP Professional Windows Vista 32Bit Windows 7 32Bit For MagicTune M Windows 2000 or later is recommended Hardware eAt least 32MB of memory eAt least 60MB of free space on the hard disk drive For more information refer to the website Removing the Software You can only remove MagicTune through Add or Remove Programs in Windows To remove MagicTune complete the following steps Installing the Software 4 2 Qi KA oN Click Start select Settings and select Control Panel from the menu For Windows XP click Start and select Control Panel from the menu Double click the Add or Remove Programs icon in the Control Panel In the Add Remove window find and select MagicTune so that it is highlighted Click Change or Remove Programs to remove the software Select Yes to start removing MagicTune Wait until a message box appears informing you that the software has been removed completely For technical support the FAQ frequently asked questions or information about the software upgrade for MagicTune please visit our website

Samsung 2443DW User Manual

Contents

Download Pdf Manuals

Related Search

Related Contents