Home

Samsung 51" D6900 Series 6 3D Full HD Plasma TV User Manual

Contents

1. Limit Position East West Selects the direction of the positioner Limit Antenna Position Adjusts and stores the antenna position for the selected satellite Store Current Position Stores the current position as the selected positioner Limit Goto Zero Moves the antenna to the reference position Reset Positioner Limit Allows the antenna to rotate over the Tull arc Reset All Setting Yes No All satellite settings will be reset to the initial values English d Other Features MENUDO Channel ENTER 4 E Edit Channel Number Use this to change channel number When channel number is changed channel information is not updated automatically Enables or disables Edit Channel Number This function may not be supported depending on the region E Fine Tune analogue channels only If the reception is clear you do not have to fine tune the channel as this is done automatically during the search and store operation If the signal is weak or distorted fine tune the channel manually Scroll to the left or right until the image is clear English settings are applied to the channel you re currently watching Fine tuned channels that have been saved are marked with an asterisk on the right hand side of the channel number in the channel banner To reset the fine tuning select Reset E Transfer Channel List The PIN input screen appears Enter your 4 digit PIN number Imports or expor
2. Picture Advanced Settings ENTERL Advanced Settings are available in Standard Movie mode You can adjust the detailed setting for the screen including colour and contrast Advanced Settings Dynamic Contrast Medium When connecting a PC you can only make changes F lt to Gamma and White Balance Gamma 0 RGB Only Mode Off Colour Space Native White Balance The displayed menu may differ depending on the model English Black Tone Off Dark Darker Darkest Select the black level to adjust the screen depth Dynamic Contrast Off Low Medium High Adjust the screen contrast Shadow Detail 2 2 QMS Increase the brightness of dark images Gamma Adjust the primary colour intensity Expert Pattern Off Pattern1 Pattern2 QDA By running the Expert Pattern function the picture can be calibrated without a generator or filter It the OSD menu disappears or a menu other than the Picture menu is opened the calibration is saved and the Expert Pattern window disappears gt While the Expert Pattern is running sound is not outputted Only enabled on DTV Component HDMI models English e RGB Only Mode Off Red Green Blue Displays the Red Green and Blue colour for making fine adjustments to the hue and saturation e Colour Space Auto Native Custom Adjust the range of colours available to create the image The Custom option is available only for PDP TV e White Bala
3. 8 Using number buttons enter your application site ID and password Then press the ENTERL4 button 9 Registered successfully If you add another service site select Yes then press the ENTERL button go to step 6 10 When completed select OK Then press the ENTER button English LI Setting up Smart Hub E Settings Configure Smart Hub settings from this screen Highlight Settings using the amp and w buttons and press the ENTER button e Account Management Register Service Account Register login Information for service sites Change Password Change account password Remove From TV Account List Delete an account from the list of accounts Deactivate Account Withdraw membership from Smart Hub English e Service Manager Ticker Autorun Off On You can set Ticker Autorun to come on when powering on the IV The Ticker application provides useful News Weather and Stock Market information The Ticker application on Smart Hub must be downloaded to use this feature Depending on your country Ticker application may have a different service or not be supported gt Channel Bound Service Off On Some channels support applications as an Internet data service allowing you to access the Internet service while watching TV Only available if supported by the broadcaster English e Reset Resets Smart Hub settings to factory default settings If you want reset Smart Hub Enter password e P
4. For an application with multiple accounts select x to access the different accounts For a more enjoyable application experience register and log in to your account For instructions on creating an account refer to How to create an Smart Hub ID English 1 Press the Red button in the Smart Hub home page 2 Select 7 by pressing the amp Y button The account list appears If you want to create an account select Create Account then the create account OSD window will appear 3 Select the desired Smart Hub ID and the press the ENTER button 4 After selecting Smart Hub ID enter the Password using the remote control When login succeeds Smart Hub ID will be displayed on the screen English How to create a Smart Hub ID Before creating a Smart Hub ID you should download the application first on the Samsung Apps 1 Press the Red button The Login screen appears 2 Select Create Account The Create Account screen will appear 3 Press the ENTER button to enter anew Smart Hub ID The Keypad screed will appear q 4 Using the keypad screen enter a Smart Hub ID A Smart Hub ID must be created in sample sample com form English Using the Keypad Pressing the TT X MIX button on the remote while you are using the Screen Keypad enables you to change the text fields to lower case capitalized case upper Case numbers and Icons Using the Green EJ button on the remote control
5. Scan Mode Selects the scanning mode of the selected satellite English Automatic Ordering e Channels found will be automatically ordered following a criterion established by all the main national and local televisions Others Ordering e If you select this menu you will find others channels ordering directly organized from private national televisions Automatic Ordering and Others Ordering are available when antenna source is set to Alr The option may differ depending on country English E Cable Search Option depending on the country sets additional search options such as the frequency and symbol rate for a cable network search Freqg Start Freq Stop Set the start or stop frequency differs in each country Symbol Rate Displays available symbol rates 4 Modulation Displays available modulation values E Standby Auto Store Off On Z Enables or disables auto tune while TV is In standby mode E Wake up Timer 1 hour later 2 hours later 00 00 02 00 12 00 14 00 HEM Selects the schedule timer to turn the TV on and scan channels automatically English E Manual Tuning scans for a channel manually and stores in the TV If a channel is locked using the Channel Lock function the PIN input window appears e Transponder Selects the transponder using the up down buttons e Scan Mode Selects either free or all channels to store e Network Search Disable Enable
6. 98 105 109 Ae 136 139 145 153 156 163 175 187 190 195 198 199 203 208 210 BN 2 214 Zin e Connecting a USB Device e Connecting to the PC through network e Recorded TV e Videos e Music e Photos e Media Contents Additional Function Other Information e Troubleshooting e Connecting to a COMMON INTERFACE slot e Teletext Feature depending on the country e Anti theft Kensington Lock e Licence e Manual Guide e How to view the e Manual 218 219 228 239 247 253 259 265 Palade 282 28 289 291 2 Using the INFO button Now amp Next guide The display identifies the current channel and the status of certain audio video settings The Now amp Next guide shows daily TV programme information for each channel according to the broadcasting time e Scroll 4 gt to view information for a desired programme while watching the current channel e scroll A Y to view information for other channels If you want to move to the currently selected channel press the ENTER button abc1 18 11 Thu 6 Jan 18 00 6 00 DIAY Life On Venus Avenue Unclassified Information 1 D No Detaild Information English 2 Using the Channel Menu Press the SIMART HUB button to select the S ARTHUB menu you want to use Each screen will be displayed E Guide The EPG Electronic Programme Guide a information is provided by broadcasters e The displayed menu may differ depending on
7. E MANUAL E MANUAL Thank you for purchasing this Samsung product To receive more complete service please register your product at www samsung com register Model Serial No Contents Channel e Using the INFO button Now amp Next guide 3 e Using the Channel Menu e Using the Channel e Using Favourite Channels e Memorising Channels e Using the Channel for Satellite TV e Using Favourite Channels for Satellite TV e Memorising Channels for Satellite TV e Other Features Basic Features e Changing the Preset Picture Mode e Adjusting Picture Settings e Changing the Picture Size e Changing the Picture Options e Setting up the TV with Your PC e Changing the Preset Sound Mode e Adjusting Sound Settings e Selecting the Sound Mode Preference e Connecting to a Wired Network 4 12 21 23 OZ of 39 51 53 54 55 62 71 19 16 8 88 Connecting to a Wireless Network Connecting to a Wireless Network Setting the network Setting the Time Locking Programme Economical Solutions Other Features Picture In Picture PIP Support Advanced Features Using the 3D function Getting Started with Smart Hub Setting up Smart Hub Using the Smart Hub service Troubleshooting for SMART HUB About AllShare Setting Up AllShare Anynet Setting Up Anynet Switching between Anynet Devices Listening through a Receiver Troubleshooting for Anynet Using the Media Contents
8. Installed Applications Source list Displays the installed applications in the TV Login Sort by fa Edit Mode Settings ntrols Information Displays ce notices new applications e J Red Login To log in to Smart Hub and advertisements ici dan cane Yellow Edit Mode Y dit the applicati h Samsung product o ellow i o e You can edit the applications such as introductions move making folder e El Green Sort by To sort the applications by category e D Blue Settings Edit and configure applications and Smart Hub settings amp The colour buttons may work differently depending on the application English NOTE e Configure the network settings before using Smart Hub For more information refer to Network Settings e Unsupported fonts within the provider s content will not display normally e Slow responses and or interruptions may occur depending on your network conditions e Depending on the region English may be the only language supported for application services e his feature is not available in some locations English e lf you experience a problem using a application please contact the content orovider e According to circumstances of the contents provider an application s updates or the application itself may be discontinued e Depending on your country s regulations some applications may Nave limited service or not be supported English Account Login
9. Schedule Manager ENTER You can view modify or delete a channel you have reserved to watch Using the Timer Viewing You can set a desired channel to be displayed automatically at the intended time Set the current time first to use this function 1 Press the ENTER button to add manual booking A pop up screen will appear 2 Press the 4 or gt button to select the Timer Viewing English 3 Press the gt 4 buttons to set the Antenna Channel Repeat or Start Time Antenna Select the desired antenna source Channel Select the desired channel Repeat Select Once Manual Sat Sun Mon Fri or Everyday to set at your convenience If you select Manual you can set the day you want The Y mark indicates the date you ve selected Date You can set the desired date It is available when you select Once in Repeat Start Time You can set the start time you want English On the Information screen you can change or cancel a reserved information e Cancel Schedules Cancel a show you Nave reserved to watch e Edit Change a show you have reserved to watch e Return Return to the previous screen Only memorised channels can be reserved English E Channel List You can view all the channel searched When you press the CH LIST button on the remote control Channel List screen will be displayed at once Programme View 4 gt Ch Mode Watch lt gt Page e The displayed image may differ depend
10. Network search using the up down buttons e Signal Quality Display the current status of broadcasting signal Information on a satellite and its transponder is subject to change depending on the broadcasting conditions When setting is completed move to Search and press the ENTER C button Channel scan is started English E Satellite System The PIN input screen appears Enter your 4 digit PIN number Satellite System is available when Antenna is set to Satellite Before running Auto Tuning set Satellite System Then channel scan is run normally e Satellite Selection You can choose the satellites for this TV e LNB Power Off On Enables or disables the power supply for the LNB English LNB Settings Configures the outdoor equipment Satellite Selects the satellite for receiving digital broadcasts Transponder Selects a transponder from the list or adds a new transponder DiSEqC Mode Selects DiSEqC mode for the selected LNB Lower LNB Oscillators Sets the LNB oscillators to a lower frequency Upper LNB Oscillators Sets the LNB oscillators to a higher frequency Tone 22 kHz Off On Auto Selects the Tone 22 KHz depending onthe gt LNB type For a universal LNB it should be Auto Signal Quality QAE Display the current status of broadcasting signal English e Positioner Settings Configures the antenna positioner Positioner On Off Enables or disables the positione
11. button to select Schedule Manager The Schedule Manager screen will be displayed lt 2 Press the ENTER button to add manual booking A pop up screen will appear English 3 Press the 4 or button to select the Timer Recording We recommend using a USB HDD with at least 5400 rom but a USB HDD of RAID type is not Supported A USB storage device cannot record until it completes the Device Performance Test 4 Press the gt a buttons to set the Antenna Channel Date or Start Time English To record a current broadcasting program Allows you to record a program currently being broadcasted Set the current time first to use this function 1 When you watch a broadcast program press t e REC button on the remote to record A pop up window will appear We recommend using a USB HDD with at least 5400 rom but a USB HDD of RAID type is not Supported A USB storage device cannot record until it completes the Device Performance Test 2 Select Length to set up the recording time and then select OK English Using the Timeshift function If you missed a live broadcast you can see from the recorded broadcast using this feature 1 When you watch a broadcast program press the gt Play button on the remote to start the Timeshift function If you want to stop the Timeshift function press the m Stop button on the remote English The Timeshift mode operates for a maximum of
12. follow the directions of Network Settings Select a network c Wired Y 2 Select the WPS PBC MEE m e ect t e n a oO N revious Connect to the Access Point easily by pressing the WPS PBC ext WPS PBC 3 Press the WPS PBC button on your router a within 2 minutes Your V automatically acquires all the network setting values it E E E needs and connects to your network 4 The network test screen appears and network setting Is done English E Ad Hoc Network Setup You can connect to a mobile device supporting Ad hoc connections without a wireless router or AP through the TV When connected to a mobile device you can use files on the device or connect to the Internet using the AllShare or Multimedia function How to set up using Ad hoc 1 Go to Network Settings screen MENULI Network Network Settings ENTERL4 lt 4 2 Select Wireless General and press ENTER then press ENTER 4 again gt English 3 select Ad hoc The message Ad hoc service supports a direct connection with Wi Fi compatible devices like a cell phone or PC Other network services may be limited Do you want to change the network connection is displayed 4 Select OK and press ENTER lt The TV searches for the mobile device 5 When the IV finishes searching for your mobile device Input the generated Network Name SSID and Security Key into the device you want to connect and then connect to the network
13. 24Hz 1280x720p 50 60HZz x 2 1280x14700 50 60HZz The mode is automatically switched to 3D mode for the 3D video input in one of the formats above English Before using 3D function NOTE e You may notice a small amount of screen flickering when watching 3D images IN poor light conditions from a strobe light etc or under a fluorescent lamp 50Hz 60Hz or 3 wavelength lamp If so dim the light or turn the lamp off e 3D Mode is set to Off automatically wnen accessing SMART HUB functions e Some Picture functions are disabled in 3D mode e PIP is not supported in 3D mode English 3D Active Glasses from Samsung s previous product IR type or other manufacturers not be supported When the TV is initially powered on may take some time until the 3D display IS Optimized The 3D Active Glasses may not work properly if there is any other 3D product or electronic devices turned on near the glasses or IV If there is a problem keep other electronic devices as far away as possible from the 3D Active Glasses gt When watching pictures from a 50Hz 3D source visually sensitive viewers may see some flicker on bright images English some files are not supported in the 2D to 3D function If you lie on your side while watching TV with 3D active glasses the picture may look dark or may not be visible Be sure to stay within the viewing angle and optimum TV viewing distance when watching 3D pictures Otherwise you
14. 4 digit PIN Change the PIN using the Change PIN option e Channel Lock Off On Lock channels in channel list to prevent unauthorized users such as children from watching unsuitable program gt Available only when the Source is set to TV English e Program Rating Lock Prevent unauthorized users Such as children trom watching unsuitable Program with a userdefined 4 digit PIN code If selected channel is locked the t symbol will be displayed The items of Program Rating Lock differs depending on the country e Change PIN Change your personal ID number required to set up the TV e Adult genre enabling Off On You can adjust the Adult genre enabling The Adult genre enabling is available for Freesat antenna only English How to watch a restricted channel If the TV is tuned to a restricted channel the Program Rating Lock will block it The screen will go blank and the following message will appear This channel is blocked by Program Rating Lock Please enter the PIN to unblock English _ Economical Solutions E Eco Solution MENU System Eco Solution ENTER C e Energy Saving Off Low Medium High Picture Off This adjusts the brightness of the TV in order to reduce power consumption If you select Picture Off the screen is turned off but the sound remains on Press any button except volume button to turn on the screen English e Eco Sensor Off On To enhance your power sav
15. 90 minutes After the Timeshift mode function has run for the maximum time the time Information will be fixed to 01 30 00 The Timeshift function is not supported for analogue channels The Timeshift functions are disabled for channels locked with Channel Lock English Before using the Timeshift and a record function A Recorded videos are DRM digital rights management protected and cannot be played on a PC or other TVs Note that files saved on the TV cannot be used after the main board is changed NOTE e Ve recommend using a USB HDD with at least 5400 rom but a USB HDD of RAID type is not Supported e The availability of both recording and the Timeshift function may differ depending on picture quality and the free space on the hard disk drive e Note that if you have paused the recording the IV will automatically resume playback English e f the 5 free memory space limit of the USB storage device is reached the Current recording process will be closed e When recording is performed by both the PVR Personal Video Recorder function and a device that supports the HDMI CEC feature recording by the PVR function takes precedence English e lf the USB device has failed the Device Performance Test the USB device must go through the Device Format and Device Performance Test again before you record with the Guide or Channel e he Timeshift functions can only be used with a USB storage device that complet
16. Depth 0 10 Adjust overall depth L R Change L R Image R L Image Swap the left and right pictures 3D 2D Off On Displays the image for the left eye only This function is deactivated when 3D Mode set to 2D 3D or Off English Resolution supported for HDMI PC mode The resolution for HDMI PC mode is optimized to 1920 x 1080 input An input resolution other than 1920 x 1080 may not be displayed properly in 3D display or full screen mode English How to watch the 3D image e Method some 3D modes may not be available depending on the format of the image SOUICE To watch in 3D wear 3D Active Glasses and press the power button on the glasses 1 Press the MENU button on your remote use the A or Y button to select Picture and then press the ENTERL4 button 2 Use the A or w button to select 3D and then press the ENTERL lt button e The displayed menu may differ depending on the model English 3 Use the A or w button to select 3D Mode and then press the ENTERL lt button 4 Using the 4 or gt buttons on your remote control select the 3D Mode of the image you want to view e he displayed menu may differ depending on the model English Supported formats and operating specifications for Standard HDMI 3D The 3D formats indicated below are recommended by the HDMI association and must be supported Source signal format Standard HDMI 1 4 3D 1920x1080p 24Hz x 2 1920x2205p
17. English e Connection Methods You can setup the wireless network connection on five ways Auto Setup Using the Auto Network Search function Manual Setup WPS PBC Ad hoc One Foot Connection Plug amp Access e The Samsung Wireless LAN adapter may not be recognized when using a connection via a USB hub or via a USB extension cable other than the cable supplied English Notice The picture may appear corrupted or have static for some channels when the IV is connected to the Samsung Wireless LAN adapter In such a case establish a connection using one of the following methods or connect the Samsung Wireless LAN adapter using a USB cable in a place that is not affected by radio interference e Method 1 Connect using the USB right angle adapter To connect the Samsung Wireless LAN adapter using the USB right angle adapter follow these steps Connect the USB right angle adapter tO e he displayed menu may differ depending on the the Samsung Wireless LAN adapter aae 2 Connect the other end of the right angle adapter to the USB port English e Method 2 Connect via an extension cable To reconnect the Samsung Wireless LAN adapter using the extension cable follow these steps 1 Connect the extension cable to the USB port e The displayed menu may differ depending on the 2 Connect the extension cable and model Samsung Wireless LAN adapter 3 Attach the Samsung Wirele
18. If network does not operate normally check the Network Name SSID and gt security key again An incorrect Security key may cause a malfunction If a device is connected once It is displayed in the Network Setting list When you connect to it again you can find It in the List English E Network Settings One Foot Connection The One Foot Connection make you easy to connect samsung TV and samsung wireless router by placing samsung wireless router within 1 foot 25cm from samsung IV If your wireless router does not support One Foot Connection you must connect using one of the other methods You can check for equipment that supports One Foot Connection on www samsung com English How to set up using One Foot Connection Turn on the power of wireless router and TV 1 Go to Network Settings screen To Network Setting enter It follow the directions of Network Select a network connection type Settings Wireless general revious WPS PBC 2 Select the One Foot Connection s One Foot Connection 3 Place the wireless router in parallel with the Samsung Wireless LAN adapter giving a s i e he displayed image may differ depending on the gap no larger than 25cm model English lf One Foot Connection does not connect your TV to your Router a pop up Window appears on the screen notifying you of the failure If you want to try using One Foot Connection again reset the wireless router disconnect the Samsu
19. Kensington Lock for lt V Rear gt additional information on proper use lt Optional gt d Please find a R icon on the rear of the TV A Kensington slot is beside the fk i gt ICON English To lock the product follow these steps 1 Wrap the Kensington Lock cable around a large stationary object such as desk or chair 2 Slide the end of the cable with the lock attached through the looped end of the Kensington Lock cable 3 Insert the locking device into the Kensington slot on the product 4 Lock the lock These are general instructions For exact instructions see the User manual supplied with the locking device gt The locking device has to be purchased separately The location of the Kensington slot may be different depending on the IV model English _ Licence SIS TheaterSound HD XY DOLBY DIGITAL PLUS PULSE S 2 0 Digital Qut TheaterSound SRS and symbol are trademarks of SRS Labs Inc TheaterSound technology is incorporated under licence from SRS Labs Inc Manufactured under licence from Dolby Laboratories Dolby and the double D symbol are trademarks of Dolby Laboratories Manufactured under licence under U S Patent s 5 451 942 5 956 674 5 974 380 5 978 762 6 487 535 amp other U S and worldwide patents issued amp pending DIS and the Symbol are registered trademarks amp DIS 2 0 Digital Out and the DTS logos are trademarks of DTS Inc
20. Photo when the Source is set to USB Select a folder in the USB device containing music files to be played when the TV is turned on automatically English NOTE e lf there is no music file on the USB device or the folder containing a music file is not selected the Timer function does not operate correctly e When there is only one photo file in the USB the Slide Show will not play e fa folder name is too long the folder cannot be selected English e Each USB you use is assigned its own folder When using more than one of the same type of USB make sure the folders assigned to each USB nave different names e lt is recommended that you use a USB memory stick and a multi card reader when using On Timer The On Timer function may not work with USB devices with a built in battery MP3 players or PMPs made by some manufacturers because these devices take a long time to be recognized English e Off Timer 1 Off Timer 2 Off Timer 3 Three different off timer settings can be made You must set the clock first Setup Select Off Once Everyday Mon Fri Mon Sat Sat Sun or Manual to set at your convenience If you select Manual you can set up the day you want to activate the timer The Y mark indicates the day you ve selected Time Set the hour and minute English 2 Locking Programme MENU System Security ENTERL E Security The PIN input screen appears before the setup screen Enter your
21. and Iwitter English Information Includes various information services such as news stocks and weather Other Includes other miscellaneous services My Account Displays the application list and your cyber cash balance starting in the middle of 2010 US and Korea only you can purchase cyber cash for buying applications through tv samsung com Help If you have questions about Smart Hub check this section first English Legal Statement Due to the various capabilities of products featuring the Samsung Smart Hub Content Service as well as limitations in the available content certain features applications and services may not be available on all devices or in all territories some features on Smart Hub may also require additional peripheral devices or membership fees that are sold separately Please visit htto www samsung com for more information on specific device information and content availability The services and availability of content through Smart Hub are subject to change trom time to time without prior notice English 2 Troubleshooting for SMART HUB Problem some application contents only appear in English How can change the language Some application services do not work When a network error occurs can only use the setting menu Possible Solution The Application content language may be different from the application user interface language The ability to change the language
22. coloured buttons Press the colour corresponding to the topic of your choice A new colourcoded page is displayed Items can be selected in the same way To display the previous or next page press the corresponding coloured button Selects the Teletext mode LIST FLOF If pressed during LIST mode switches the red green yellow blue mode mode to List save mode In List save mode you can save a Teletext page into a list using the store button Displays the available sub page Sub page size Displays the next Teletext page page up English page down index reveal cancel Displays the previous Teletext page Displays the index contents page at any time while you are viewing Teletext Displays the hidden text answers to quiz games for example To display the normal screen press it again shrinks the Teletext display to overlap with the current broadcast English Typical Teletext page Part nim olov Contents Selected page number Broadcasting channel identity Current page number or search indications Date and time Text Status information FASTEXT information English LI Anti theft Kensington Lock The Kensington Lock is not supplied by Samsung It is a device used to physically fix the system when using It in a public place he appearance and locking method may differ from the illustration depending on the manufacturer Refer to the manual provided with the
23. dress and your TV can not connect To resolve this problem ask your ISP about the procedures required to connect devices other than a PC such as your TV to the Internet If your Internet service provider requires an ID or password to connect to the Internet your TV may not be able to connect to the Internet If this is the case you must enter your ID or password when connecting to the Internet The internet connection may fail because of a firewall problem If this is the case contact your Internet service provider If you cannot connect to the Internet even after you have followed the procedures of your Internet service provider English Ll Setting the Time MENU System gt Time ENTERL E Time e Clock Setting the clock is for using various timer features of the TV The current time will appear every time you press the INFO button If you disconnect the power cord you have to set the clock again Clock Mode Auto Manual Auto Set the current time automatically using the time from a digital channel The antenna must be connected in order to set the time automatically English Manual Set the current time manually Depending on the broadcast station and signal the auto time set up may not be correct In this case set the time manually Clock Set Set the Date and Time Available only when Clock Mode is set to Manual You can set the Date and Time directly by pressing the number buttons on the re
24. e Samsung Wireless LAN adapter and The USB extension Cable are sold separately and are offered by select retailers Ecommerce sites and Samsungparts com English e o use a wireless network your IV must be connected to a wireless IP sharer either a router or a modem If the wireless IP sharer Supports DHCP your TV can use a DHCP or static IP address to connect to the wireless network e select a channel for the wireless IP sharer that is not currently being used If the channel set for the wireless IP sharer Is currently being used by another device nearby this will result in interference and communication failure e lf you apply a security system other than the systems listed below it will not work with the TV English If Pure High throughput Greenfield 802 11n mode is selected and the Encryption type is set to WEP TKIP or TKIP AES WPS2Mixed for your Wireless router Samsung TVs will not Support a connection in compliance with new WI FI certification specifications If your wireless router supports WPS Wi Fi Protected Setup you can connect to the network via PBC Push Button Configuration or PIN Personal Identification Number WPS will automatically configure the SSID and WPA key in either mode If your router modem or device is not certified it may not connect to the IV b gt via the Samsung Wireless LAN adapter Turn off the TV when you connect the Samsung wireless LAN adapter and then turn on the TV
25. for LED Fi For PODRIA Suitable for reducing eye How to search a keyword by using index page 1 2 If you want to search a keyword select Index to open the Index screen Press the 4 or button to select a character order you want and then press the ENTERL button Press the amp or Ww button to select a keyword you want to see and then press the ENTERL button You can view the corresponding e Manual instruction screen To close the Index screen press the Close button English
26. i artist on artist I standard Sorting standard groups tnat Is sorted by m a is different depending on the each category Musikk_3 VISNE contents Ingen artist Ingen artist l l Edit Mode Select and play Musikk_4 Musikk_9 Ingen artist Ingen artist multiple files or assign them to My Playlist This function is available only for Music Page bar Moves to another page containing a list of files English 2 Recorded TV To use the recording or Timeshift function the connected USB device must be available for recording Device format is recommended to use USB HDD During the Device formatting do not disconnect the device while formatting is IN progress If you format the device all files will be deleted Before formatting your device to the tv please back up your files to prevent them from damage or loss of data SAMSUNG is not responsible for any data file damage or data loss The reading writing performance and controller of USB hard disk drives vary Accordingly some USB HDD may fail a performance test A USB hard disk drive that fails a performance test cannot be used with a PVR English E Timer Recording in Schedule Manager SMART HUB Schedule Manager ENTER C Allows you to make a reservation to record a program scheduled for broadcast Set the current time first to use this function Using the Timer Recording function digital channels only 1 Press the ENTERL
27. image is properly displayed the poor picture may caused by the source or signal English Issues The TV image does not look as good as it did in the store The picture is distorted macro block error small block dots pixelization solutions and Explanations If you have an analogue cable set top box upgrade to a digital set top box Use HDMI or Component cables to deliver HD high definition picture quality Cable Satellite subscribers Try HD stations from the channel line up Antenna connection Iry HD stations after performing Auto programme Many HD channels are up scaled trom SD Standard Definition contents Adjust the Cable Set top box video output resolution to 1080 or 720p Make sure you are watching the TV at the minimum recommended distance based on the size and definition of the signal Compression of video contents may cause picture distortion especially in fast moving pictures such as sports and action movies Low signal level or bad quality can cause picture distortion This is not a TV issue Mobile phones used close to the TV cca up to 1m may cause noise in picture on analogue and digital TV English Issues Colour is wrong or missing There is poor colour or brightness There is a dotted line on the edge of the screen The picture is black and white When changing channels the picture freezes or is distorted or delayed solutions and Explanations If you re using a compon
28. in stereo sound signal Only available when the Source is set to TV English 2 Connecting to a Wired Network You can attach your ITV to your LAN using cable in three ways e You can attach your ITV to your LAN by connecting the LAN port on the back of your TV to an external modem using a LAN cable See the diagram below The Modem Port on the Wall External Modem TV Rear Panel bata VDSL Cable e Tv ne wee Modem Cable LAN Cable English e You can attach your ITV to your LAN by connecting the LAN port on the back of your TV to a IP Sharer which is connected to an external modem Use LAN cable for the connection See the diagram below The Modem Port on the Wal TV Rear Panel External Modem IP Sharer ADSL VDSL Cable TV having DHCP server ees eS 5 m j vava i il Modem Cable LAN Cable LAN Cable English e Depending on how your network is configured you may be able to attach your TV to your LAN by connecting the LAN port on the back of your TV directly to a network wall outlet using a LAN cable See the diagram below Note that the wall outlet is attached to a modem or router elsewhere in your house The LAN Port on the Wall TV Rear Panel LAN Cable English e lf you have a Dynamic Network you should use an ADSL modem or router that supports Dynamic Host Configuration Protocol DHCP Modems and routers that support D
29. interruption disabling removal of or suspension of any content or service made available through this device Samsung may impose limits on the use of or access to certain services or content in any case and without notice or liability samsung is neither responsible nor liable for customer service related to the content and services Any question or request for service relating to the content or services should be made directly to the respective content and service providers English gt L About AllShare AllShare connects your TV and compatible Samsung mobile phones devices through a network You can play media contents including videos photos and music saved on your mobile phones or the other devices Such as your PC by controlling them on the TV via the network For more information visit www samsung com or contact the Samsung call centre Mobile devices may need additional software installation For details refer to each device s user s guide English L Setting Up AllShare E AllShare Settings e Media On Off Enables or disables the media AllShare Settings function When the media function is on Media a contents play can be controlled by a mobile phone or other devices that support DLNA DMC English E Media shows a list of mobile phones or connected devices which have been set up with this TV for using the Media function The Media function is available in all devices which support DLNA
30. max Above 1280 x 720 30 frame max English Audio Decoder Supports up to WMA 7 8 9 STD WMA 9 PRO does not support 2 channel excess multi channel or lossless audio WMA sampling rate 22050HZ mono is not Supported Other Restrictions NOTE e Video content will not be played or not be played correctly if there is an error in the content or the container e Sound or video may not work if the contents have a standard bitrate frame rate above the compatible Frame sec listed in the table above e f the Index Table is in error the Seek Jump function is not supported e You may experience file stuttering while playing a video through a network connection e Video content can not be played if there are many contents in one file English gt Playing movie file continuously Resume Play If you exit the playing Videos function it can be played later from the point where it was stopped The Resume function does not support multiple users It will have only memorised the point where the most recent user stopped playing 1 Select the movie file you want to play continuously by pressing the lt 4 or gt button to select it from the file list section 2 Press the gt Play ENTER button A triangle icon will appear on the progress bar when the playback starts 3 Press the TOOLS button and then select Resume The Movie will begin to play from where it was stopped English E Music Playing M
31. of the time Auto Wide Automatically adjusts the picture size to the 16 9 aspect ratio 16 9 Adjusts the picture size to 16 9 for DVDs or wide broadcasting gt Wide Zoom Magnities the picture size more than 4 3 Adjusts the Position by using 4 W buttons English Zoom Magnities the 16 9 wide pictures vertically to fit the screen size Adjusts the Position or Size by using amp Y button 4 3 The default setting for a movie or normal broadcasting Do not watch in 4 3 format for a long time Traces of borders displayed on the left right and centre of the screen may cause image retention screen burn which are not covered by the warranty Screen Fit Displays the full image without any cut off when HDMI 720p 10801 1080p DTV 1080i 1080p or Component 1080 1080p signals are inputted English Smart View 1 Reduces the 16 9 picture by 50 Smart View 2 Reduces the 16 9 picture by 25 Smart View 1 is enabled only in HDMI mode Smart View 2 is enabled only in HDMI or DTV mode The picture size can vary depending on the input resolution when content is played using Videos under Smart Hub English NOTE e Depending on the input source the picture size options may vary e The available items may differ depending on the selected mode e When connecting a PC only 16 9 and 4 3 modes can be adjusted e Settings can be adjusted and stored for each external device connected to an In
32. the model Using programme schedules provided by broadcasters you can specify programmes you want to watch in advance so that the channel automatically changes to the selected programme channel at the specified time Programme entries may appear blank or out of date depending on a channel status English Using Channel View EX Red Sche Mgr Displays the Schedule Manager E Green 24 Hours Viewing the list of programmes to be broadcasted before 24 hours Yellow 24 Hours Viewing the list of programmes to be broadcasted after 24 hours Channel View All 1 2 3 4 5 6 Sche Mgr 2 10 Tue 1 Jun 3 DTV Air 800 five Home and Away 18 00 18 30 Drama 4 8 Dani is devastated when scott makes clear his views on marriage 18 00 18 30 19 00 American Chopper Tine Team Programmes resume at 06 00 Home and No Information Fiv Dark Angel No Information QVC Selection No Information 24 Hours 24 Hours Ch Mode i Information Page C Schedule BP Blue Ch Mode Select the type of channels you want to display on the Channel View window English 1 Information Displays details of the selected programme Page Move to next or previous page L Watch Schedule When selecting the current programme you can watch the selected programme When selecting the next programme you can reserve the selected programme English E Schedule Manager SMART HUB
33. the registration code authorized for the TV If you connect to the DivX web site and register you can download the VOD registration file If you play the VOD registration using Videos under Smart Hub the registration is completed For more information on DivX VOD visit http vod divx com E Network Remote Control Off On Turn on off or give permission to Samsung mobile phones devices You must have a Samsung Mobile phone 3 touch control device which supports Wireless Remote Control For more details refer to each device s manual English E Common Interface e Cl Menu This enables the user to select from the CAM provided menu Select the Cl Menu based on the menu PC Card e Application Info View information on the CAM inserted into the Cl slot and on the Cl or Cl t CARD which is inserted into the CAM You can install the CAM anytime whether the TV is on or off 1 Purchase a CI CAM module at your nearest dealer or by phone 2 Firmly insert the Cl or Cl CARD into the CAM in the direction of the arrow 3 Insert the CAM with the Cl or Cl CARD into the common interface slot in the direction of the arrow so that it aligns parallel with the slot 4 Check if you can see a picture on a scrambled signal channel English 2 Picture In Picture PIP E PIP MENU System PIP ENTER You can watch the TV tuner and one external video source simultaneously PIP Picture in Picture doe
34. there is a problem keep other electronic devices as far away as possible from the 3D Active Glasses If so dim the light or turn the lamp off We recommend sitting with viewer s eyes on a level with the screen Turn off 3D glasses while not using them English Issues solutions and Explanations sound Quality First of all please perform the Sound Test to confirm that your TV audio is properly operating go to MENU Support Self Diagnosis Sound Test If the audio is OK the sound problem may caused by the source or signal There is no sound or the sound e Please check the volume of the external device connected to your TV is too low at maximum volume The picture is good but there is e Set the Speaker Select option to TV Speaker in the sound menu No sound e f you are using an external device make sure the audio cables are connected to the correct audio input jacks on the TV e lf you are using an external device check the device s audio output option ex you may need to change your cable box s audio option to HDMI when you have a HDMI connected to your TV e f you are using a DVI to HDMI cable a separate audio cable is required e lf your TV has a headphone jack make sure there is nothing plugged into it English Issues The speakers are making an inappropriate noise No Picture No Video The TV turns off automatically solutions and Explanations Check the cable connections Make sure a vi
35. to change the input mode T9 ABC You can change the language by using the TOOLS button You can use this Screen Keypad in a several Smart Hub applications Here is how to input characters using keypad of ABC type 4 1 For example suppose that you want to input 105Chang 4 2 Press the TTX MIX button on the remote 3 times to change the input mode from lower case to numbers 4 3 Press the 1 0 and 5 button in numerical order English 4 4 4 9 4 6 4 7 Press the I TX MIX button on the remote 4 times to change the input mode from numbers to upper case Press the 2 button on the remote 3 times to input C Press the TTX MIX button on the remote 3 times to change the input mode from upper case to lower case Press buttons on the remote to input the rest of Chang When done press the ENTERL button English 5 Using the remote control enter the Password e Password must be 6 12 words e You can delete the entered character using the PRE CH button e Using the lt lt REW or FF button you can select icon you want to enter In icon keypad screen 6 Account created You can use the services provided by all users of your Samsung TV with a single login by linking the users account to the IV ID If you want to register a service site ID select Yes Service Site list will appear on the screen gt English 7 Select Register of the Service Site you want then press the ENTER lt button
36. A sound echo may occur due to a difference in decoding speed between the main soeaker and the audio receiver In this case set the TV to External Speaker When Speaker Select is set to External Speaker the volume and MUTE buttons will not operate and the sound settings will be limited When Speaker Select is set to External Speaker e TV Speaker Off External Speaker On When Speaker Select is set to TV Speaker e TV Speaker On External Speaker On If there is no video signal both speakers will be mute English e Auto Volume Off Normal Night To equalize the volume level on each channel set to Normal Night This mode provides an improved sound experience compared to Normal mode making almost no noise It is useful at night When you control the volume of the external devices Set topbox or DivX Player connected to the TV set to off the Auto Volume mode Because you cant feel the effect of the volume control by the Auto Volume mode lt S E Reset Sound Yes No Reset all sound settings to the factory defaults English 2 Selecting the Sound Mode When you set to Dual 1 H the current sound mode is displayed on the screen Audio Type Dual 1 2 Dual 1 2 Moo MONO Automatic change A2 Stereo STEREO MONO DUAL I lt gt DUAL I DUAL I MONO STEREO Automatic change NICAM Stereo i MONO DUAL I If the stereo signal is weak and an automatic switching occurs then switch to the mono Only activated
37. ARD is not Supported in some countries and regions check with your authorized dealer If you have any problems please contact a service provider Insert the Cl or CI CARD that supports the current antenna settings The screen will be distorted or will not be seen English Ll Teletext Feature depending on the country The index page of the Teletext service gives you information on how to use the service For Teletext information to be displayed correctly channel reception must be stable Otherwise information may be missing or some pages may not be displayed You can change Teletext pages by pressing the numeric buttons on the remote control English Teletext on mix off store Size E hold Activates the Teletext mode for the current channel Press the button twice to overlap the Teletext mode with the current broadcasting screen Press it one more time to exit teletext stores the Teletext pages Displays the teletext on the upper half of the screen in double size To move the text to the lower half of the screen press It again For normal display press it once again Holds the display at the current page in the case that there are several secondary pages that follow automaticially To undo press it again English Colour buttons If the FASTEXT system is used by the broadcasting company the different topics ona Teletext page are colour coded and can be selected by pressing the
38. CK D Returns to the previous screen Perform functions corresponding to each Colour button image displayed on the screen during Colour Button Data Service d Operations may differ depending on the service provider Text can be inputted using the numbers and letters printed on and above the numeric keys on the remote control If you input the numeric keys on the remote control one by one into the blank where the cursor is located on the text input screen the corresponding lettering numbers or special characters will be displayed e g If you press the number 3 key in rapid succession then the assigned etters D E and F and the number 3 will alternately appear in order of input Symbol English rare switches to teletext mode or Returns to the previous screen Operations may differ depending on the service provider a w 4 Moves the Data Service menu up down left and right OKL Runs a selected item EXIT g Stops a running Data Service English _ Troubleshooting If you have any questions about the TV first refer to this list If none of these troubleshooting tips apply please visit www samsung com then click on Support or contact the call centre listed on the back cover of this manual Issues solutions and Explanations Picture Quality First of all please perform the Picture Test and confirm that your TV is properly displaying test image go to MENU Support Self Diagnosis Picture Test If the test
39. DMC e Allowed Denied Allows Blocks the the devices e Delete Deletes the devices from the list This function only deletes the name of the device from the list If the deleted device is turned on or tries to connect to the TV It may appear on the list gt again English Using the Media Function An alarm window appears informing the user that the media contents videos photos music sent from a mobile phone will be displayed on your TV The contents are played automatically 3 seconds after the alarm window appears If you press the RETURN or EXIT button when the alarm window appears the media contents are not played NOTE e lf the media function executes for the first time the warning popup window appears Press the ENTERL lt button to select Allow then you can use Media function on that device English To turn off the media contents transmission from the mobile phone set Media to Off in the AllShare Settings Contents may not be played on your TV depending on their resolution and format The ENTERL and 4 gt buttons may not work depending on the type of media content Using the mobile device you can control the media playing For details refer to each mobile s user s guide English What is Anynet Anynet is a function that enables you to control all connected Samsung devices that support Anynet with your Samsung TV s remote The Anynet system can be used only with Samsung devices that h
40. English The selected tile is displayed on the top with its playing time If video time information is unknown play time and progress bar are not displayed During playing the video you can search using the 4 and gt button You can use lt lt REW and gt gt FF buttons during playback English In this mode you can enjoy movie clips contained on a Game but you cannot play the Game itself e Supported Subtitle Formats Name MPEG 4 time based text SAMI SubRip SubViewer Micro DVD File extension ttxt smi rt sub Sub or txt English Format XML HTML string based string based string based e Supported Video Formats Video Codec Resolution SNES se Bae Audio Codec fos Mbps File Extension Container DivX 3 11 4 x 5 1 6 0 1920x1080 6 30 8 a wy H 264 BP MP HP NPM J DivX 3 11 4 x 5 1 6 0 1920x1080 6 30 8 ast ASF H 264 BP MP HP DEUI ww ewo 6 30 e English File Extension Container Video Codec Resolution Eu tate lath tae Audio Codec fos Mbps Ea H 264 BP MP HP 1920x1080 ADPCM 3GPP AAC HE MPEG4 SP ASP 1920x1080 6 30 AAC AAC 30 5 S 8gp va MPEG2 1920x1080 24 25 30 30 agg aac tp TS H 264 1920x1080 MP3 DD English Video Decoder e Supports up to H 264 Level 4 1 e GMC H 264 FMO ASO RS VC1 SP MP AP L4 and AVCHD are not supported e XVID MPEG4 SP ASP Below 1280 x 720 60 frame
41. HCP automatically provide the IP address subnet mask gateway and DNS values your TV needs to access the Internet so you do not have to enter them manually Most home networks are Dynamic Networks some networks require a Static IP address If your network requires a Static IP address you must enter the IP address subnet mask gateway and DNS values manually on your TV s Cable Setup Screen when you set up the network connection To get the IP address subnet mask gateway and DNS values b gt contact your Internet Service Provider ISP If you have a Windows computer you can also get these values through your computer You can use ADSL modems that support DHCP if your network requires a static IP address ADSL modems that support DHCP also let you use Static IP addresses English E Network Settings MENU Network Network Settings ENTER C set the network connection to use various Internet services such as Smart Hub AllShare and perform software upgrade E Network Status MENU Network Network Status ENTER 4 You can check the current network and Internet status E AllShare Settings MENU Network AllShare Settings ENTER C Selects whether to use media functions on the network English E Network Setup Auto Use the Automatic Network Setup when connecting your TV to a network that supports DHCP To set up your TV s cable network connection automatically follow these steps How t
42. IMITED TO WARRANTIES OF MERCHANTABILITY OF SATISFACTORY QUALITY FITNESS FOR A PARTICULAR PURPOSE OF ACCURACY OF QUIET ENJOYMENT AND NON INFRINGEMENT OF THIRD PARTY RIGHTS SAMSUNG DOES NOT GUARANTEE THE ACCURACY VALIDITY TIMELINESS LEGALITY OR COMPLETENESS OF ANY CONTENT OR SERVICE MADE AVAILABLE THROUGH THIS DEVICE AND DOES NOT WARRANT THAT THE DEVICE CONTENT OR SERVICES WILL MEET YOUR REQUIREMENTS OR THAT OPERATION OF THE DEVICE OR SERVICES WILL BE UNINTERRUPTED OR ERROR FREE English UNDER NO CIRCUMSTANCES INCLUDING NEGLIGENCE SHALL SAMSUNG BE LIABLE WHETHER IN CONTRACT OR TORT FOR ANY DIRECT INDIRECT INCIDENTAL SPECIAL OR CONSEQUENTIAL DAMAGES ATTORNEY FEES EXPENSES OR ANY OTHER DAMAGES ARISING OUT OF OR IN CONNECTION WITH ANY INFORMATION CONTAINED IN OR AS A RESULT OF THE USE OF THE DEVICE OR ANY CONTENT OR SERVICE ACCESSED BY YOU OR ANY THIRD PARTY EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES Third party services may be changed suspended removed terminated or interrupted or access may be disabled at any time without notice and Samsung makes no representation or warranty that any content or service will remain available for any period of time Content and services are transmitted by third parties by means of networks and transmission facilities over which Samsung has no control Without limiting the generality of this disclaimer Samsung expressly disclaims any responsibility or liability for any change
43. MPEG HE AAC This function allows you to reduce the disparity of a voice signal which is one of the signals received during a digital TV broadcast to a desired level According to the type of broadcast signal MPEG HE AAC can be adjusted between 10dB and OGB To increase or decrease the volume adjust between the range O and 10 respectively English e SPDIF Output SPDIF Sony Philips Digital InterFace is used to provide digital sound reducing interference going to speakers and various digital devices such as a DVD player Audio Format During the reception of a digital TV broadcast you can select the Digital Audio output SPDIF format from the options PCM or Dolby Digital Audio Delay Correct audio video sync problems when watching TV or video and when listening to digital audio output using an external device such as an AV receiver Oms 250ms English e Dolby Digital Comp Line RF This function minimizes signal disparity between a dolby digital signal and a voice signal i e MPEG Audio HE AAC ATV Sound Select Line to obtain dynamic sound and RF to reduce the difference between loud and soft sounds at night time Line Set the output level for signals greater or less than 31dB reference to either 20dB or 310B RF Set the output level for signals greater or less than 20dB reference to either 10dB or 20dB English E Speaker Settings e Speaker Select External Speaker TV Speaker
44. Mode and Background Music Setting functions e sorting files by preference in the Photos Music and Videos folders lt e The lt lt REW or gt gt FF button while a movie is playing DivX DRM Multi audio embedded captions are not supported Allshare PC Software should be permitted by the firewall programme on your PC English When you use SMART HUB mode through a network connection depending on the functions of the provided server e The sorting method may vary e The Scene Search function may not be supported e The Resume which resumes playing of a video may not be supported The Resume function does not support multiple users It will have only memorised the point where the most recent user stopped playing lt e The lt 4 or button may not work depending on the content information gt You may experience file stuttering while playing a video in SMART HUB through a network connection English Before using Media Contents functions It might not work properly with unlicenced multimedia files Need to Know List before using Media Contents e MIP Media Transfer Protocol is not supported e The file system supports FAT16 FAT32 and NTFS e Certain tyoes of USB Digital camera and audio devices may not be compatible with this TV English Media Contents only supports USB Mass Storage Class MSC devices MSC is a Mass Storage Class Bulk Only Transport device Examples of MSC are Thumb drives Flash C
45. Product Includes software DTS Inc All Rights Reserved English DivX Certified to play DivX video up to HD 1080p including premium content DI WX DivX DivX Certified and associated logos are trademarks of Divx Inc and are used under licence ABOUT DIVX VIDEO DivX is a digital video format created by Divx Inc This is an official DivX Certified device that plays DivX video Visit www divx com for more information and software tools to convert your files into DivX video ABOUT DIVX VIDEO ON DEMAND This DivX Certified device must be registered in order to play purchased DivX Video on Demand VOD movies To obtain your registration code locate the DivX VOD section in your device setup menu Go to vod divx com for more information on how to complete your registration Covered by one or more of the following U S patents 7 295 673 7 460 668 7 515 710 7 519 274 Open Source Licence Notice In the case of using open source software Open Source Licences are available on the product menu Open Source Licence Notice is written only English English _ How to view the e Manual You can read the introduction and instructions about the IV features stored in your TV MENU Support e Manual ENTERL English Screen Display Current on air Ch the cat broadcasting Change the category Press lt 4 or gt button to select category you want Basic Features Display
46. The wireless network connection The Samsung Wireless USB dongle is required to use a wireless network failed e Make sure the Network Connection is set to Wireless Make sure the TV is connected to a wireless IP sharer router English Issues Others The picture won t display in full screen Plasma IV is making humming noise 0d m BD pa AV Image Retention Burn In Issue 0d m D mam AV solutions and Explanations HD channels will have black bars on either side of the screen when displaying up scaled SD 4 3 contents Black bars on the top and bottom will appear during movies that have aspect ratios different from your TV Adjust the picture size options on your external device or TV to full screen Plasma IVs typically make a soft humming sound This is normal It s caused by the electrical charges that are used to create the images on the screen If the humming sound is loud you may have set the brightness on the TV too high Try setting the brightness lower You can also have loud humming if the back of your Plasma TV is too close to a wall or other hard surface Also try rerouting your connection cables Improper installation of wall mount can create excessive noise To minimize the possibility of screen burn this unit is equipped with screen burn reduction technology Pixel Shift technology enables you to set picture movement up down Vertical Line and side to side Horizontal Dot Englis
47. ard Readers and USB HDD USB HUB are not Supported Devices should be connected directly to the TV s USB port Before connecting your device to the IV please back up your files to prevent them from damage or loss of data SAMSUNG is not responsible for any data file damage or data loss Connect a USB HDD to the dedicated USB 1 HDD port Do not disconnect the USB device while it is loading The higher the resolution of the image the longer It takes to display on the screen English The maximum supported JPEG resolution is 15360X8640 pixels For unsupported or corrupted files the Not Supported File Format message IS displayed If the files are sorted by Folder View up to 1000 files can be displayed in each folder If the number of files and folders saved on a USB storage device is approximately over 8000 the files and folders may not appear and some folders may not be opened gt MP3 files with DRM that have been downloaded from a non free site cannot be played Digital Rights Management DRM is a technology that supports the creation distribution and management of the content in an integrated and comprehensive way including the protection of the rights and interests of the content providers the prevention of the illegal copying of contents as well as managing billings and settlements English If more than 2 PTP devices are connected you can only use one at a time If more than two MSC devices are conne
48. ave the Anynet feature To be sure your Samsung device has this feature check If there is an Anynet logo on tt NOTE e You can only control Anynet devices using the TV remote control not the buttons on the TV e he ITV remote control may not work under certain conditions If this occurs reselect the Anynet device e The Anynet functions do not operate with other manufacturers products English For the method of connecting external devices refer to the supported user manual NOTE e Connect the Optical cable between the DIGITAL AUDIO OUT OPTICAL jack on your TV and the Digital Audio Input on the Home Theatre e When following the connection above the Optical jack only outputs 2 channel audio You will only hear sound from the Home Theatre s Front Left and Right speakers and the subwoofer If you want to hear 5 1 channel audio connect the DIGITAL AUDIO OUT OPTICAL Jack on the DVD Satellite Box i e Anynet Device 1 or 2 directly to the Amplifier or Home Theatre not the TV gt English You can connect only one Home Theatre You can connect an Anynet device using the HDMI cable Some HDMI cables may not support Anynet functions Anynet works when the AV device supporting Anynet is in the standby or on Status Anynet supports up to 12 AV devices in total Note that you can connect up to 3 devices of the same type English Anynet Menu The Anynet menu changes depending on the type and status o
49. creen and then press the ENTER lt button English 2 Press the arrow buttons to select a channel as a Favourite and then press ENTER A check appears to the left of the channel You can select more than one channel Pressing ENTER again deselects the channel 3 Select Edit Favourites at the bottom of your screen and then press ENTERL4 button The Edit Favourites pop up appears English 4 Highlight a group on the Favourites list and then press ENTERL lt The Edit Favourites screen has five groups Favourites 1 Favourites 2 etc You can add a Favourite channel to any one of the groups Select a group using the up and down arrows on your remote 5 select OK press ENTERL lt and then press ENTERL 4 again 6 Press RETURN D to exit Edit Mode English e Using Edit Mode to Delete a Channel from the Channel List 1 Select the Edit Mode icon on the upper right of your screen and then press the ENTER button 2 Press the a Y buttons to select a channel and then press ENTER A check appears to the left of the channel You can select more than one channel Pressing ENTER 4 again deselects the channel 3 Select Delete at the bottom of your screen and then press ENTERL lt gt gt A pop up appears asking If you want to delete the item English 4 Select OK press ENTERL lt and then press ENTERL again The channel is deleted from the Channel List 5 Press RETURN to exit Edit Mo
50. cted some of them may not be recognized A USB device that requires high power more than 500mA or 5V may not be supported If an over Dower warning message is displayed while you are connecting or using a USB device the device may not be recognized or may malfunction English If the TV has been no input during time set in Auto Protection Time the Screensaver will run The power saving mode of some external hard disk drives may be released automatically when connected to the TV If a USB extension cable is used the USB device may not be recognized or the files on the device may not be read lf a USB device connected to the TV is not recognized the list of files on the device is corrupted or a file in the list is not played connect the USB device to the PC format the device and check the connection gt lf a file deleted from the PC is still found when SMART HUB is run use the Empty the Recycle Bin function on the PC to permanently delete the file English lt Screen Display Move to the file you desired using the up down right left buttons and then press the ENTER or Play button The file is played Home Return to content Device name Displays a Play home connected device name Change Content Device Changes the content type or i Ming Ingen artist i Upper Folder Sweet Candy File List Section YOu Musikk_1 Musikk_6 sorting Displays sorting can aa the ner
51. d control Positioner Type USALS DiSEqC 1 2 Sets the positioned type between DiSEqC 1 2 and USALS Universal Satellite Automatic Location System My Longitude Sets the longitude for my location My Latitude Sets the latitude for my location Satellite Longitude Settings Sets the longitude of user defined satellites English User Mode Sets the position of satellite antenna according to each satellite If you store the current position of satellite antenna according to a certain satellite when the signal of that satellite is needed the satellite antenna can be moved to pre populated position Satellite Selects the satellite to set the position for Transponder Selects a transponder from the list for signal reception Moving Mode Selects the movement mode between discrete and continuous movement Step Size Adjusts the step size degrees for the antenna rotation Step Size is available when Moving Mode is set to Step English Go to Stored Position Rotates the antenna to the stored satellite position Antenna Position Adjusts and stores the antenna position for the selected satellite Store Current Position Stores current position as the selected positioner limit Signal Quality Display the current status of broadcasting signal English Installer Mode Sets limits to the scope of movement of satellite antenna or reset the position Generally installation guide uses this function
52. de e Select All Select all the channels English Using the TOOLS button with the Channel e Upcoming programme digital channels only View details on the programme being aired on a selected digital channel e Edit Favourites Set channels you watch frequently as favourites 1 Select the Edit Favourites then press the ENTER lt button 2 Press the ENTER lt button to select Favourites 1 5 then press the OK button One favourite channel can be added in several of favourite channels gt among Favourites 1 5 e Lock Unlock Lock a channel so that the channel cannot be selected and viewed English NOTE e This function is available only when the Channel Lock is set to On e Edit Channel Name analogue channels only Assign your own channel name This function may not be supported depending on the region e Edit Channel Number Select the channel number to change This function may not be supported depending on the region e Delete Delete a channel to display the channels you want lt English Channel Status Display Icons Icon D lt Operations An analogue channel A channel selected A channel set as a Favourites 1 5 A locked channel English 2 Using Favourite Channels E Favourites SMART HUB Favourites ENTER shows all favourite channels e Edit Favourites Geeta You can set the selected channels to desired favourites channels The ye symbol wil be displayed and th
53. deo cable is not connected to an audio input For antenna or cable connections check the signal strength Low signal level may Cause sound distortion Ensure the Sleep Timer is set to Off in the Setup menu go to MENU System Time If your PC is connected to the TV check your PC power settings Make sure the AC power cord is plugged in securely to the wall outlet and the TV When watching IV from an antenna or cable connection the TV will turn off after 10 15 minutes if there is no signal English gt Issues RF Cable Antenna Connection The TV is not receiving all channels PC Connection A Mode Not Supported message appears solutions and Explanations e Make sure the Antenna cable is connected securely e Please try Plug amp Play Initial setup to add available channels to the channel list Go to MENU System Plug amp Play Initial setup and wait for all available channels to be stored e Verify the Antenna is positioned correctly e Set your PC s output resolution so it matches the resolutions supported by the TV English Issues solutions and Explanations PC is always shown on the e This is normal PC is always shown on the source list regardless of source list even if a PC is not whether a PC is connected connected The video is OK but there is no e lf you are using an HDMI connection check the audio output setting on audio your PC Network Connection
54. depends on the service provider Check with the service provider Refer to the help website for application service provider information If network connection doesn t work your service might be limited as all functions except the setting menu are needed to connect to the internet English gt All content and services accessible through this device belong to third parties and are protected by copyright patent trademark and or other intellectual property laws Such content and services are provided solely for your personal noncommercial use You may not use any content or services In a manner that has not been authorized by the content owner or service provider Without limiting the foregoing unless expressly authorized by the applicable content owner or service provider you may not modify copy republish upload post transmit translate sell create derivative works exploit or distribute in any manner or medium any content or services displayed through this device YOU EXPRESSLY ACKNOWLEDGE AND AGREE THAT USE OF THE DEVICE IS AT YOUR SOLE RISK AND THAT THE ENTIRE RISK AS TO SATISFACTORY QUALITY PERFORMANCE AND ACCURACY IS WITH YOU THE DEVICE AND ALL THIRD PARTY CONTENT AND SERVICES ARE PROVIDED AS IS WITHOUT WARRANTY OF ANY KIND EITHER EXPRESS OR IMPLIED SAMSUNG EXPRESSLY DISCLAIMS ALL WARRANTIES AND CONDITIONS WITH RESPECT TO THE DEVICE AND ANY CONTENT AND SERVICES EITHER EXPRESS OR IMPLIED INCLUDING BUT NOT L
55. device is properly connected to the TV and check if the Anynet HDMI CEC is set to On in the Anynet Setup menu Press the TOOLS button to display the Anynet menu and select a menu you want select View TV in the Anynet menu Press the SOURCE button on the TV remote control and select a non Anynet device You cannot use the remote control when you are configuring Anynet or switching to a view mode Use the remote control when the Anynet setting or switching to view mode Is complete You cannot use the play function when Plug amp Play initial setup is in progress English The connected device Is not displayed The TV Programme cannot be recorded The TV sound is not output through the receiver Check whether or not the device supports Anynet functions Check whether or not the HDMI cable is properly connected Check whether Anynet HDMI CEC is set to On in the Anynet setup menu search Anynet devices again You can connect an Anynet device using the HDMI cable only Some HDMI cables may not support Anynet functions If connection is terminated because there has been a power interruption or the HDMI cable has been disconnected please repeat the device scan Check whether the antenna jack on the recording device is properly connected Connect the optical cable between TV and the receiver English _ Using the Media Contents Enjoy photos music and or movie files saved on a USB Mass Storag
56. e Class MSC device 1 Press the SMART HUB button ET 2 Press the Y or A button to select desired menu Videos Photos Music then press the ENTERL button e he displayed menu may differ depending on the model English 2 Connecting a USB Device 1 Turnon your TV 2 Connect a USB device containing recorded tv photo music and or movie files to the USB port on the back or side panel of the TV When USB is connected to the TV popup window appears Ihen you can select New device connected English TV Rear Panel Oni USB Drive e The displayed menu may differ depending on the model 2 Connecting to the PC through network You can play pictures music and videos saved on your PC through a network connection in the SMART HUB mode 1 For more information on how to configure your network refer to Setting the Network e You are recommended to locate both TV and PC in same subnet The first 3 parts of the subnet address of the TV and the PC IP addresses should be the same and only the last part the host address should be changed e g IP Address 123 456 789 gt English 2 Using aLAN cable connect between the external modem and the PC onto which the AllShare PC Software will be installed e You can connect the TV to the PC directly without connecting it through a Sharer Router Functions that are not supported when connecting to a PC through a network e he BGM
57. e Picture Mode ys V English You can start or stop a background music V Sound Mode You can change the Sound Mode NV Zoom You can zoom into images in full screen mode a V Rotate You can rotate images Pp V Title Search You can move directly to another Title ae You can view a subtitle You can select a specific Subtitle language if the subtitle file contains multiple NV languages Repeat Mode You can play movie and music files repeatedly Picture Size You can adjust the picture size to your preference oy Displays the Subtitle Setting Y n set Subtitle Setting H EEE a RS ye V V subtitle option English You can start or stop Alternatively the gt Play or Pl P V V V ay cai 11 Pause button on the remote can be used Start Slide Show V Stop Slide Show You can start or stop a slide show Pf Shuffle You can play the music sequentially or randomly tly Resume A movie file will begin to play from where it was V stopped Scene Search oe en search scene divided into 5 chapters you ae l You can search the movie using 4 and buttons at Time Search NV intervals of 10 seconds To view detailed information about the selected device press the INFO button To view detailed information about the selected file press the INFO button English E Data Service Gailey Allows the user to use information text still images graphics documents software etc transmitted via broadcast media Auto Run Da
58. e and it Is affecting operation you can change the software to the previous version If the software was changed existing software is displayed e Standby Mode Upgrade A manual upgrade will be automatically performed at selected time Since the power of the unit is turned on internally the screen may be turned on slightly for the product This phenomenon may continue for more than 1 hour until the software upgrade Is complete lt E Contact Samsung gt View this information when your IV does not work properly or when you want to upgrade the software You can find information regarding our call centres and how to download products and software English _ Using the 3D function for POER E 3D This exciting new feature enables you to view 3D content In order to fully enjoy this feature you must purchase a pair of Samsung 3D Active Glasses to view 3D video Samsung 3D Active Glasses are sold separately For more detailed purchasing information contact the retailer where you purchased this TV English MENUDO Picture 3D ENTERL IMPORTANT HEALTH AND SAFETY INFORMATION FOR 3D PICTURES Read and understand the following safety information before using the TV s 3D function A WARNING e some viewers may experience discomfort while viewing 3D TV such as dizziness nausea and headaches If you experience any such symptom stop viewing 3D TV remove 3D Active Glasses and rest gt e Watching 3D images for an extended p
59. e channel will be set as a favourite English 1 On the Channel screen select a channel and press the TOOLS button lf you want to add mulitole channels use the Edit Mode menu in the top right corner of the Channel screen 2 Add or delete a channel in the favourite channels you want among 1 2 3 4 and 5 One or more groups can be selected The Y mark appears to the left of the selected channels 3 After you have changed the settings the channel list for each group can be gt viewed in favourite channels English 2 Memorising Channels MENU Channel ENTER C E Antenna The option may differ depending on country Before your television can begin memorising the available channels you must specify the type of signal source that is connected to the TV English E Country Not available in some locations The PIN input screen appears Enter your 4 digit PIN number select your country so that the TV can correctly auto tune the broadcasting channels e Digital Channel Change the country for digital channels e Analogue Channel Change the country for analogue channels English E Auto Tuning e Auto Tuning scans for a channel automatically and stores in the TV Automatically allocated programme numbers may not correspond to actual or desired programme numbers If a channel is locked using the Channel Lock function the PIN inout window appears Antenna source Select the antenna source to memor
60. ear English 2 Connect the Cl CARD Adapter into the COMMON INTERFACE port on the product 3 Insert the Cl or CI CARD difficult to insert after the mounting Insert the card after attaching the Cl Module on TV It is difficult to attach the module if you insert the card before attaching We recommand that you insert the Cl card before you mount the TV on a wall It may be English E Using the CI or Cl CARD To watch paid channels the Cl or CI CARD must be inserted e f you don t insert the Cl or Cl CARD some channels will display the message Scrambled Signal e he pairing information containing a telephone number the Cl or Cl CARD ID the Host ID and other Information will be displayed in about 2 3 minutes If an error message is displayed please contact your service provider lt e When the configuration of channel information has finished the message Updating Completed is displayed indicating the channel list is updated English NOTE e You must obtain a Cl or Cl CARD from a local cable service provider e When removing the Cl or Cl t CARD carefully pull it out with your hands since dropping the Cl or CI CARD may cause damage to it e Insert the Cl or Cl CARD in the direction marked on the card e The location of the COMMON INTERFACE slot may be different depending on the model English Cl or Cl C
61. ed the Device Performance Test e lf you attempt the recording or Timeshift function with a device that did not have the Device Performance Test the function will not start English If you press REC on the remote control while the Channel screen is being displayed or record with Timer Recording the TV may start or stop recording 1 or 2 seconds later than you intended due to the time needed to process the command lf a USB device dedicated to recording is connected existing Timeshift or recording files that were saved abnormally will automatically be deleted If you switch to external inout mode during recording the recording will continue but the _ REC button will be disabled If any function that turns off the TV Sleep Timer Off timer etc is set for a time that conflicts with recording the TV will be turned off once the recording is complete English Playing Recorded TV Program 1 Press the 4 gt A Y button to select the desired file in the file list 2 Press the ENTER lt button or gt Play button e lhe selected file is displayed on the top with its playing time e During playing the recorded TV program you can search using the 4 and gt button e You can use lt lt REW and FF buttons during playback English E Videos Playing Video 1 Press the A Y button to select the desired file in the file list 2 Press the ENTER button or gt Play button
62. electing Contents Area The Do you want to execute this is displayed Select Yes and then press the ENTERL button The OSD window will be displayed 2 o return to the e Manual screen press the E MANUAL button English gt Viewing the Contents Changing the Preset Picture Mode Contents Area You can view the corresponding contents if you selected a sub menu To move previous or next page hells source aan to m is only press the 4 or p button Suitable for a bright room MENUDO ENTER Select your preferred picture type Suitable for a normal environment fe aa gt J For PDP IW Suitable for reducing eye strain Suitable for watching movies in a dark room Suitable for watching movies and games Try Now Displays the corresponding menu s Home Moves to the e Manual home screen Zoom Magnifies a screen Index Displays index screen English Using the Zoom mode When you view the e Manual instruction select the Zoom to magnify the screen You can scroll through the magnified screen by using the A or w buttons To return to the previous screen press the RETURN button English Changing the Preset Picture Mode MENU ENTER Select your preferred picture type When an input source is set to PC the Picture Mode is only available the Standard and Entertain Suitable for a bright room Suitable for a normal environment
63. ent connection make sure the component cables are connected to the correct jacks Incorrect or loose connections may cause colour problems or a blank screen Adjust the Picture options in the TV menu go to Picture mode Colour Brightness Sharpness Adjust Energy Saving option in the TV menu go to MENU System Eco Solution Energy Saving Try resetting the picture to view the default picture settings go to MENU Picture Reset Picture If the picture size is set to Screen Fit change it to 16 9 Change cable satellite box resolution If you are using an AV composite input connect the video cable yellow to the Green jack of component input 1 on the TV If connected with a cable box please try to reset the cable box Reconnect the AC cord and wait until the cable box reboots It may take up to 20 minutes Set the output resolution of the cable box to 1080i or 720p English Issues 3D Cela nD man AY The 3D Active Glasses may not work properly if there is any other 3D product or electronic devices turned on near the glasses or IV You may notice a small amount of screen flickering when watching 3D images in poor light conditions from a strobe light etc or under a fluorescent lamp 50Hz 60Hz or 3 wavelength lamp he ideal viewing distance should be three times or more the height of the screen If you leave 3D glasses on battery lifespan is shortened Solutions and Explanations If
64. eriod of time may cause eye strain If you feel eye strain stop viewing 3D TV remove your 3D Active Glasses and rest English e A responsible adult should frequently check on children who are using the 3D function If there are any reports of tired eyes headaches dizziness or nausea have the child stop viewing 3D IV and rest e Do not use the 3D Active Glasses for other purposes Such as general eyeglasses sunglasses protective goggles etc e Do not use the 3D function or 3D Active Glasses while walking or moving around Using the 3D function or 3D Active Glasses while moving around may result in injuries due to running into objects tripping and or falling English e 3D Mode Select the 3D input format If you want to feel the 3D effect fully please wear the 3D Active Glasses first and then select 83D Mode from the list below that provides the best 3d viewing experience When watching 3D images turn on 3D Active Glasses 3D Mode Operation Turns the 3D function off Changes a 2D image to 3D ae Displays two images next to each other A Displays one image above another English Some files may not be supported the 2D 3D Side by Side and Too amp Bottom are available when the resolution is 720p 10801 and 1080p in DIV HDMI and USB mode or when set to PC and the PC is connected through an HDMI DVI cable 3D Perspective 5 5 Adjust overall 3D perspective of on screen image
65. etwork connection manually follow these steps 1 Follow Steps 1 through 2 in the How to set up automatically procedure 2 Select the IP Setting on network test screen 3 Set IP Mode to Manual 4 Press the Y button on your remote to go to the IP Address English Enter the IP Address Subnet Mask Gateway and DNS Server values Use the number buttons on your remote to enter numbers and the arrow buttons to move from one entry field to another When done select the OK The network test screen appears and network setting is done English 2 Connecting to a Wireless Network To connect your TV to your network wireless you need a wireless router or modem and a Samsung Wireless LAN adapter WISOSABGN WISO9ABGN2 WISTOABGN which you connect to your TV s back or side panel USB port See the illustration below The LAN Port on the Vall Wireless IP sharer TV Rear Panel router having DHCP server 1 Samsung Wireless LAN adapter LAN Cable English samsung s Wireless LAN adapter is sold separately and is offered by selected retailers and Ecommerce sites Samsung s Wireless LAN adapter supports the IEEE 802 11a b g and n communication protocols Samsung recommends using IEEE 802 1 1n When you play video over a network connection the video may not be played smoothly NOTE e You must use the Samsung Wireless LAN adapter WISOSABGN WISOSABGNZ2 WISTOABGN to use a wireless network lt
66. f the Anynet devices connected to the IV Anynet Menu Description View TV Changes Anynet mode to TV broadcast mode Device List shows the Anynet device list Recording recorder starts recording immediately using the recorder This is only available for devices that support the recording function device_name MENU Shows the connected device menus E g If a DVD recorder is connected p the disc menu of the DVD recorder will appear device_name TOOLS Shows the tools menu of the connected device E g If a DVD recorder is connected the play menu of the DVD recorder will appear Depending on the device this menu may not be available English Anynet Menu Description device_name Title Menu shows the title menu of the connected device E g If a DVD recorder is connected the title menu of the DVD recorder will appear Depending on the device this menu may not be available Stop Recording recorder Stops recording Receiver Sound is played through the receiver If more than one recording device is connected they are displayed as recorder and if only one recording device is connected it will be represented as device_name English 2 Setting Up Anynet MENU System gt Anynet HDMI CEC ENTER E Anynet HDMI CEC Off On To use the Anynet Function Anynet HDMI CEC must be set to On When the Anynet HDMI CEC function is disabled all the Anynet related operations are deactiva
67. h gt Issues A Mode Not Supported message appears There is a plastic smell from the TV The TV Signal Information is unavailable in the Self Diagnostic menu The TV is tilted to the side The channel menu is greyed out unavailable Your settings are lost after 30 minutes or every time the TV is turned off solutions and Explanations Check the supported resolution of the TV and adjust the external device s output resolution accordingly This smell is normal and will dissipate over time This function is only available with digital channels from an Antenna RF Coax connection Remove the base stand from the TV and reassemble tt The Channel menu is only available when the TV source Is selected If the TV is in the Store Demo mode it will reset audio and picture settings every 30 minutes Change the settings from Store Demo mode to Home Use mode in the Plug amp Play Initial setup procedure Press the SOURCE button to select TV mode and go to MENU System Plug amp Play Initial setup ENTERL 4 English Issues You have intermittent loss of audio or video You see small particles when you look closely at the edge of the frame of the TV The PIP menu is not available solutions and Explanations Check the cable connections and reconnect them Loss of audio or video can be caused by using overly rigid or thick cables Make sure the cables are flexible enough for long term
68. ilable in the broadcast e Preference Primary Audio Language Secondary Audio Language Primary Subtitle Language Secondary Subtitle Language Primary Teletext Language Secondary Teletext Language Select a language which will be the default language when a channel is selected English Subtitle Use this menu to set the Subtitle mode e Subtitle Off On Switches subtitles on or off e Mode Normal Hearing Impaired Sets the subtitle mode e Subtitle Language Sets the subtitle language lf the programme you are watching does not support the Hearing Impaired function Normal automatically activates even if the Hearing Impaired mode is selected gt English is the default in cases where the selected language is unavailable In the broadcast English E Digital Text Disable Enable UK only If the programme broadcasts with digital text this feature is enabled MHEG Multimedia and Hypermedia Information Coding Experts Group An International standard for data encoding systems used in multimedia and hypermedia This is at a higher level than the MPEG system which includes datalinking hypermedia such as still images character service animation graphic and video files as well as multimedia data MHEG is user runtime interaction technology and is being applied to various fields including VOD Video On Demand ITV Interactive TV EC Electronic Commerce tele education tele conferencing digital libra
69. ing on the model English Using the operation buttons with the Channel List Red Antenna Switches to Air Cable The option may differ depending on country Yellow Programme View Channel View Displays the programme when Cigital channel is selected Returns to the channel view 4 gt Ch Mode Channel Move to the type of channels you want to display on the Channel List screen Change channels When you press the Programme View button you can move to other gt channels using 4 gt Channel button The option may differ depending on country L Watch Information Watches the channel you select Displays details of the selected programme Page Move to next or previous page English 2 Using the Channel The option may differ depending on country E Channel SMART HUB Channel ENTERL 4 Delete added channels or set favourites channels and use the programme guide for digital broadcasts Change the antenna or channel settings using the menus in the top right corner of the screen English e Antenna Toggle among antenna sources The option may differ depending on country e Sort Sorting by Channel Number or Channel Name x Edit Mode Delete channels assigned to Favourites Refer to Using the Favourite Channels for details on how to assign a channel to favourite Setting Channels you watch frequently as Favourites 1 Select the Edit Mode icon on the upper right of your s
70. ings the picture settings will automatically adapt to the light in the room lf you adjust the Backlight Cell Light QDA the Eco Sensor will be set to Off Min Backlight QED Min Cell Light QAD When Eco sensor is On the minimum screen brightness can be adjusted manually lf Eco Sensor is On the display brightness may change become slightly darker or brighter depending on the surrounding light intensity English e No Signal Power Off Off 15 min 30 min 60 min To avoid unnecessary energy consumption set how long you want the TV to remain on if it s not receiving a signal Disabled when the PC is in power saving mode e Auto Power Off Off On The TV will be automatically turned off after 4 hours of being left idle to prevent overheating E Auto Protection Time 2 hours 4 hours 8 hours 10 hours Off lt for LED TV If the screen remains idle with a still image for a certain period of time defined by the user the screen saver is activated to prevent the formation of ghost Images on the screen English E Screen Burn Protection CARMIA To reduce the possibility of screen burn this unit is equipped with screen burn prevention technology The Time setting allows you to programme the time between movement of the picture in minutes e Pixel Shift Off On Using this function you can minutely move pixels on the PDP in horizontal or vertical direction to minimize after image on the screen Optimum c
71. ireless router Samsung TVs will not Support a connection in compliance with new WI FI certification specifications If your wireless router supports WPS Wi Fi Protected Setup you can connect to the network via PBC Push Button Configuration or PIN Personal Identification Number WPS will automatically configure the SSID and WPA key in either mode If your router modem or device is not certified it may not connect to the IV b gt Ensure the TV is turned on before you connect the Samsung Wireless LAN adapter English Connection Methods You can setup the wireless network connection on five ways Auto Setup Using the Auto Network Search function Manual Setup WPS PBC Ad hoc One Foot Connection Plug amp Access English LI Setting the network E Network Setup Auto Most wireless networks have an optional security system that requires devices that access the network to transmit an encrypted security code called an Access or security Key The Security Key is based on a Pass Phrase typically a word or a series of letters and numbers of a specified length you were asked to enter when you set up security for your wireless network If you use this method of setting up the network connection and have a Security Key for your wireless network you will have to enter the Pass Phrase during the setup process gt English 1 Ihe Network function searches for available How to set up a
72. ise The option may differ depending on country gt Digital amp Analogue Digital Analogue Select the channel source to memorise When selecting Cable Digital amp Analogue or Digital Provide a value to scan for cable channels Search Mode Full Network Quick Scans for all channels with active broadcast stations and stores them in the TV English If you select Quick you can set up the Network Network ID Frequency Modulation and Symbol Rate manually by press the button on the remote control Network Auto Manual Selects the Network ID setting mode among Auto or Manual Network ID When Network is Manual you can set up Network ID using the numeric buttons Frequency Displays the frequency for the channel differs in each country gt Modulation Displays available modulation values Symbol Rate Displays available symbol rates English Automatic Ordering 29 Channels found will be automatically ordered following a criterion established by all the main national and local televisions Others Ordering GME If you select this menu you will find others channels ordering directly organized from private national televisions Automatic Ordering and Others Ordering are available when antenna source is set to Alr The option may differ depending on country English E Cable Search Option depending on the country sets additional search options such as the frequency and s
73. ition numbers trom PO to P99 You can select a channel by entering the position number in this mode e C aerial channel mode S cable channel mode These two modes allow you to select a channel by entering the assigned number for each aerial broadcasting station or cable channel English Q Using the Channel for Satellite TV The option may differ depending on country E Channel SMART HUB Channel ENTERL 4 Delete added channels or set favourites channels and use the programme guide for digital broadcasts Select a channel in the All Channels Analogue TV Radio and Data Other screen Change the antenna or channel settings using the menus in the top right corner of the screen e Antenna Toggle among the antenna sources The option may differ depending on country e amp Sort Sorting by Channel Number or Channel Name e Edit Mode Edit the channels as you want Refer to Using the Favourite Channels for details on how to assign a channel to favourite e Select All Select all the channels English Using the TOOLS button with the Channel e Edit Favourites Set channels you watch frequently as favourites 1 Select the Edit Favourites then press the ENTER lt button 2 Press the ENTER lt button to select Favourites 1 5 then press the OK button 2 One favourite channel can be added in several of favourite channels among Favourites 1 5 English lt e Lock Unlock Lock a channel so tha
74. iver to the DIGITAL AUDIO OUT OPTICAL jack of the TV be English When the receiver i e Home Theatre is set to On you can hear sound output from the TV s Optical jack When the TV is displaying a DTV air signal the TV will send out 5 1 channel sound to the receiver When the source Is a digital component such as a DVD and is connected to the IV via HDMI only 2 channel sound will be heard from the receiver English _ Troubleshooting for Anynet Problem Anynet does not work Possible Solution Check if the device is an Anynet device The Anynet system supports Anynet devices only Only one receiver home theatre can be connected Check if the Anynet device power cord is properly connected Check the Anynet device s Video Audio HDMI cable connections Check whether Anynet HDMI CEC is set to On in the Anynet setup menu Check whether the TV remote control is in TV mode Check whether the remote control is Anynet compatible Anynet doesn t work in certain situations Searching channels or Plug amp Play initial setup etc When connecting or removing the HDMI cable please make sure to search devices again or turn your TV off and on again Check if the Anynet Function of Anynet device is set on English want to start Anynet want to exit Anynet The message Connecting to Anynet device appears on the screen The Anynet device does not play Check if the Anynet
75. kground music or sound effects so that dialog can be heard more clearly English e Equalizer Adjusts the sound mode standard sound mode only Balance L R Adjusts the balance between the right and left speaker 100HZz 300Hz 1kHz 3kHz 10kHz Bandwidth Adjustment Adjusts the level of specific bandwidth frequencies Reset Resets the equalizer to its default settings English E Broadcast Audio Options e Audio Language digital channels only Change the default value for audio languages The available language may differ depending on the broadcast English e Audio Format digital channels only When sound is emitted from both the main speaker and the audio receiver a sound echo may occur due to the decoding speed difference between the main speaker and the audio receiver In this case use the TV Speaker function Audio Format option may differ depending on the broadcast 5 1ch Dolby digital sound is only available when connecting an external speaker through an optical cable English e Audio Description not available in all locations digital channels only This function handles the Audio Stream for the AD Audio Description which is sent along with the Main audio trom the broadcaster Audio Description Off On Turn the audio description function on or off Volume Adjust the audio description volume English E Additional Settings digital channels only e DTV Audio Level
76. l in the favourite channels you want among 1 2 3 4 and 5 One or more groups can be selected The Y mark appears to the left of the selected files 3 After you have changed the settings the channel list for each group can be gt viewed in favourite channels English 2 Memorising Channels for Satellite TV for LED 5700 and above for PDP TV MENU Channel ENTERL E Antenna The option may differ depending on country Before your television can begin memorising the available channels you must specify the type of signal source that is connected to the IV English E Country Not available in some locations The PIN input screen appears Enter your 4 digit PIN number select your country so that the TV can correctly auto tune the broadcasting channels e Digital Channel Change the country for digital channels e Analogue Channel Change the country for analogue channels English E Auto Tuning e Auto Tuning scans for a channel automatically and stores in the TV Automatically allocated programme numbers may not correspond to actual or desired programme numbers If a channel is locked using the Channel Lock function the PIN inout window appears Antenna Source Select the antenna source to memorise The option may differ depending on country Channel Type Select the Channel type to memorise Satellite Selects the satellite to scan The option may differ depending on country
77. l sources and adjust the picture for optimum quality Available in AV COMPONENT 480i 1080i and HDMI 1080 Cinema Smooth is available only for PDP TV E Reset Picture Yes No Resets your current picture mode to its default settings English 2 Setting up the TV with Your PC set the input source to PC E Auto Adjustment MENUO Picture Auto Adjustment ENTER C4 Adjust frequency values positions and fine tune the settings automatically Not available when connecting with an HDMI to DVI cable English E PC Screen Adjustment MENU Picture Screen Adjustment PC Screen Adjustment ENTERL4 e Coarse Fine Removes or reduces picture noise If the noise is not removed by Fine tuning alone then adjust the frequency as best as possible Coarse and Fine tune again After the noise has been reduced readjust the picture so that it is aligned to the centre of screen e Position Adjust the PC screen position with direction button A Y lt gt gt lt e Image Reset Resets the image to default settings English Using Your TV as a Computer PC Display setting Up Your PC Software Based on Windows XP Depending on the version of Windows and the video card the actual screens on your PC may differ in which case the same basic set up information will almost always be applied If not contact your computer manufacturer or Samsung Dealer 1 Click on Control Panel on the Windo
78. may not be able to enjoy proper 3D effects The ideal viewing distance should be three times or more the height of the screen We recommend sitting with viewer s eyes on a level with the screen gt English _ Getting Started with Smart Hub foam DE Features Search Your Video e a a a a a gE Search All Easily search and access content from diverse sources e g applications Your Video AllShare Your Video Enjoy your movie wathing with a customized video on demand VOD recommendation service AN A a Ta tr iL Ta a N FN ar L rn L ea AGA aa OQ IVY y N IN IS IGdL U lS IS NILE tO English Social TV Share your TV viewing experience with your friends via social networking service SNS Smart Hub brings useful and entertaining f SART HUB contents and services directly from the web to your TV Schedule Manager in Sortby EditMode Settings e he displayed menu may differ depending on the model English Screen Display S ART HUB Samsung Apps Application service You can esncine Aree a 7 F experience various service by provided samsung Recommended Recommended Applications Displays the recommended ma zz a p i service by Samsung You are TV Screen Displays the ed w A TIA pa F a not able to add or delete a current channel Favourites Channel Videos Photos VEe e EAV ETET G service in this list ooe y
79. mote control Time Zone Auto Manual Select your time zone Available only when the Clock Mode is set to Auto English GMT GMT 3 00 GMT 12 00 Selects your time zone Available only when the Time Zone is set to Manual DST Daylight Saving Time Off On GEM Switches the Daylight saving Time function on or off Available only when the Time Zone is set to Manual English Using the Sleep Timer MENULI System Time Sleep Timer ENTERL 4 e Sleep Timer WAS Automatically shuts off the TV after a preset period of time 30 60 90 120 150 and 180 minutes To cancel Sleep Timer select Off English Setting the On Off Timer MENU System Time ENTERL e On Timer 1 On Timer 2 On Timer 3 Three different on timer settings can be made You must set the clock first Setup Select Off Once Everyday Mon Fri Mon Sat Sat Sun or Manual to set at your convenience If you select Manual you can set up the day you want to activate the timer The Y mark indicates the day you ve selected English Time Set the hour and minute Volume Set the desired volume level Source Select TV or USB content to be played when the TV Is turned on automatically USB can be selected only when a USB device is connected to the TV Antenna when the Source is set to TV Select the desired Antenna Channel when the Source is set to TV Select the desired channel Music
80. nce Adjust the colour temperature for a more natural picture R Offset G Offset B Offset Adjust each colour s red green blue darkness gt R Gain G Gain B Gain Adjust each colour s red green blue brightness Reset Resets the White Balance to Its default settings English e 10p White Balance Off On QEPD Controls the white balance in 10 point interval by adjusting the red green and blue brightness Available when the picture mode is set to Movie and when the external input is set to all input Some external devices may not support this function Interval Select interval to adjust Red Adjust the red level Green Adjust the green level Blue Adjust the blue level Reset Resets the 10p White Balance to its default settings English e Flesh Tone Emphasize pink Flesh Tone e Edge Enhancement Off On Emphasize object boundaries e Motion Lighting Off On Reduce power consumption by brightness control Motion Lighting is available in Standard Movie mode Not supported in 3D mode When changing a setting value of Contrast Motion Lightning will be set to Off English e xvYCC Off On QAD Setting the xvYCC mode on increases detail and colour space when watching movies from an external device e g DVD player connected to the HDMI or Component IN jacks Available when the picture mode is set to Movie and when the external input is set to HDMI or Component Some ex
81. ng Wireless LAN adapter and then try again from Step 1 You can also choose one of the other connection setup methods 4 Wait until the connection is automatically established 5 The network connection screen appears and network setting is done 6 Place the wireless router in a desired location gt If the wireless router settings change or you Install a new AP you must perform the One Foot Connection procedure again beginning trom Step 1 English E Network Setup Plug amp Access Plug amp Access function make you easy to connect samsung ITV and samsung wireless router by using USB memory stick If your wireless router does not support Plug amp Access you must connect using one of the other methods You can check for equipment that supports Plug amp Access on www samsung com English How to set up using Plug amp Access function Turn on the power of wireless router and TV 1 Insert USB memory stick into our Samsung wireless router and checking wireless router LED status Blinking On 2 Then take USB memory out and insert It into Samsung TV 3 Wait until the connection is automatically established lf Plug amp Access does not connect your TV to your wireless router a pop up window appears on the screen notifying you of the failure If you want to try bp using Plug amp Access a gain reset the wireless router disconnect the Samsung Wireless LAN adapter and then try again from Step 1 You can also cho
82. o set up automatically 1 Go to Network Settings screen To enter it ZSE follow the directions of Network Settings oe s Wired Wireless genera lt 2 Select the Wired 3 The network test screen appears and network setting is done WPS PBC English If it fails to set automatically check the Network Setting connection of LAN port Wired network and Internet connection completed MAC Address 00 12 fb 2b 56 4d If you cannot find network connection m e e e e values or if you want to set connection SEC LinkShare DNSSewer 192 168 11 1 Internet is connected successfully manually set it to Manual Refer to following es have a problem with using Internet Service contact your Internet service si How to set up manually Retry IP Setting It is not Supported when the network speed is under 10 Mbps English E Network Settings Manual Use the Manual Network Setup when connecting your TV to a network that requires a Static IP address Getting the Network Connection Values To get the Network connection values on most Windows computers follow these steps 1 Right click the Network icon on the bottom right of the screen 2 In the pop up menu that appears click Status 3 On the dialog that appears click the Support tab 4 On the Support Tab click the Details button The Network connection values are displayed English How to set up manually To set up your TV s cable n
83. ondition for pixel shift TV AV Component HDMI PC p English The Pixel Shift value may differ depending on the monitor size inches and mode This function is not available in the Screen Fit mode e Auto Protection Time Off 10 min 20 min 40 min 1 hour If the screen remains idle with a still image for a certain period of time defined by the user the screen saver is activated to prevent the formation of ghost images on the screen e Scrolling This function removes after images on the screen by moving all the pixels on the PDP according to a pattern Use this function when there are remaining after images or symbols on the screen especially when you displayed a still image on the screen for a long time English The after image removal function has to be executed for a long time approximately 1 hour to effectively remove after images on the screen If the after image Is not removed after performing the function repeat the function again Press any key on the remote control to cancel this feature Side Grey Light Dark When you watch TV with the screen ratio set to 4 3 the screen Is prevented from any damage by adjusting the white balance on both extreme left and right sides English _ Other Features MENU System ENTERL E Language e Menu Language Set the menu language e Teletext Language Set a desired language for teletext English is the default in cases where the selected language is unava
84. ose one of the other connection setup methods English 4 Ihe network connection screen appears and network setting is done 5 Place the wireless router in a desired location If the wireless router settings change or you install a new wireless router you must perform the Plug amp Access procedure again beginning from Step 1 English Priority QOS Samsung wireless Router is optimized HD AV streaming for Samsung DTV This iS our product s distinctive function samsung wireless Router can be connected with many devices such as laptop mobile phone BD player etc In case of connecting Samsung TV to Samsung wireless Router while other devices are connected Samsung wireless Router will give Samsung TV a priority connection than other devices This function ensures the best streaming contents and throughput speed e Make your TV faster by giving priority bandwidth to your TV on off optional e By giving priority to Samsung IVs enjoy HD content without buffering e Connection soeed may vary based on the network environment English If Your TV Fails to Connect to the Internet Your TV may not be able to connect to the Internet because your ISP has permanently reg istered the MAC adaress a unique identifying number of your PC or modem which it then authenticates each time you connect to the Internet as a way of preventing unauthorized access As your TV has a different MAC address your ISP can not authenticate its MAC ad
85. out on the TV English e After selecting Screen Fit in HDMI 1080 1080p or Component 1 080i 1080p mode you may need to center the picture 1 Press the Y button to select Position 2 Press the ENTER button 3 Press the A Y lt 4 or button to move the picture 4 Press the ENTER button 5 Select Close by pressing the Y and A buttons sequentially To reset the picture position press Reset English e HD High Definition 16 9 1080i 1080p 1920x1080 720p 1280x720 e Settings can be adjusted and stored for each external device you have connected to an input on the TV Input Source Picture Size 480i ties ae nihi 720p Auto Wide 16 9 Wide Zoom Zoom 4 3 DTV 1080i 1080p Auto Wide 16 9 Wide Zoom Zoom 4 3 Screen Fit Smart View 2 0g DEAY AV Component 480i 480p 576i 576p 720p 16 9 Wide Zoom Zoom 4 3 Component 1080i 1080p 16 9 Wide Zoom Zoom 4 3 Screen Fit HDMI 720p 1080i 1080p 16 9 Wide Zoom Zoom 4 3 Screen Fit Smart View 10g S A Smart View 2 COgE DERV PC 16 9 4 3 English e 4 3 Screen Size 16 9 Wide Zoom Zoom 4 3 Available only when picture size is set to Auto Wide You can determine the desired picture size at the 4 3 WSS Wide Screen Service size or the original size Each European country requires different picture size Not available in PC Component or HDMI mode English _ Changing the Picture Options E Advanced Settings MENU
86. ries and network games English E General e Game Mode Off On When connecting to a game console such as PlayStation or Xoox you can enjoy a more realistic gaming experience by selecting game mode NOTE e Precautions and limitations for game mode Jo disconnect the game console and connect another external device set Game Mode to Off in the setup menu f you display the TV menu in Game Mode the screen shakes slightly English Game Mode is not available when the input source is set to TV or PC After connecting the game console set Game Mode to On Unfortunately you may notice reduced picture quality If Game Mode Is On Picture mode is set to Standard and Sound mode is set to Movie English e BD Wise Off On Gi Provides the optimal picture quality for Samsung DVD Blu ray and Home Theatre products which support BD Wise When BD Wise is turned On the picture mode is automatically changed to the optimal resolution Available when connecting Samsung products that support BD Wise through a HDMI cable e Boot Logo Off On Display Samsung logo when the TV Is turned on e TV Name Sets the TV name so you can find it easily on a mobile device lt gt If you select User Input you can type on the TV using the OSK On Screen Keyboard English E Anynet HDMI CEC For details on set up options refer to the Anynet HDMI CEC instructions E DivX Video On Demand shows
87. roperties More Display information about Smart Hub Terms of Service Agreement Display the Terms of Service Agreement English 2 Using the Smart Hub service E Samsung Apps samsung Apps is a store for downloading applications to be used on Samsung TV AV equipment Users can enjoy a variety of contents such as videos music photos games useful information etc using the downloaded applications Additional applications will be available in the future English Using the colour buttons with the Samsung Apps e XY Red Login To log in to the internet Ay Samsung Apps What s New se avi Ce n Video Game Sports e E Green List View Thumbnail View FE Information To change the view mode Other la My Account e D Blue Sort by To sort the se applications by Recommended Most downloaded Most recent or Name in Thumbnail View Sort by DS Return e Return Moves to previous menu English Using the Samsung Apps by category The following categories are available What s New Displays newly registered applications Video Displays various video media such as movies IV shows and short length videos Game Displays various games such as sudoku and chess Sports Displays various sports media such as match information images and short length video Lifestyle Includes various lifestyle media services such as music personal photo management tools and social networking such as Facebook
88. s not function in the same mode NOTE e For PIP sound refer to the Sound Select instructions e lf you turn the TV off while watching in PIP mode the PIP window will disappear English e You may notice that the picture in the PIP window becomes slightly unnatural when you use the main screen to view a game or karaoke e While Channel Lock and SMART HUB is in operation the PIP function cannot be used PIP settings Main picture Sub picture Component HDMI PC TV English PIP Off On Activate or deactivate the PIP function Channel Select the channel for the sub screen Size ml Select a size for the sub picture Position _ 7 _ Select a position for the sub picture Sound Select Main Sub You can choose the desired sound Main Sub in PIP mode English 2 Support E e Manual MENU Support ENTERL You can read the introduction and instructions about the TV features stored in your TV For the detailed information about e Manual Screen refer to How to view the e Manual English E Self Diagnosis MENU Support ENTERL4 Self Diagnostic might take few seconds this is part of the normal operation of the TV e Picture Test Yes No Use to check for picture problems e Yes If the test pattern does not appear or there is noise in the test pattern select Yes There may be a problem with the TV Contact Samsung s Call Centre for assistance l
89. s the sub menu list Press ENTERL button to select sub menu you want Changing the Picture Options Help Displays the e Manual Operation Buttons Guide or Product guide Index Displays index screen Press ENTERL button l X Exit the e Manual English Using the Help Display the e Manual Guide amp the Product Guide by pressing Q How to view the e Manual o share You can read the introduction and instructions about the TV features stored in your TV MENU Picture Picture Mode ENTER lt e Manual Guide gt lt Product Guide gt The e Manual guide appears as above The product guide appe ars as above English How to toggle between the e Manual and the corresponding menu s QO Changing the Preset Picture Mode a Select your preferred picture type Z When an input source is set to PC the and Suitable for a bright room Suitable for a normal environment onm For RDRANA Suitable for reducing eye strain for LED TW Suitable for watching movies in a dark room Suitable for watching movies and games Method 1 1 Select Try Now if you want to execute the corresponding menu s 2 o return to the e Manual screen press the E MANUAL button Chl E ooo Picture Backlight Contrast Brightness Sparpness Colour Tint G R e he displayed menu may differ depending on the model Method 2 1 Press the ENTER L button when s
90. ss LAN adapter to the back of the TV near the top using double sided adhesive tape The Samsung Wireless LAN Adapter should be installed in an interface free area in order to avoid interference between the adapter and tuner English 2 Connecting to a Wireless Network To connect your IV to your network wireless you can use a wireless network to use the Samsung Wireless LAN adapter where is built in the TV The LAN Port on the Wall Wireless IP sharer router having DHCP server LAN Cable English samsung Wireless LAN adapter supports the IEEE 802 11a b g and n communication protocols Samsung recommends using IEEE 802 11n When you play video over a network connection the video may not be played smoothly NOTE e o use a wireless network your IV must be connected to a wireless IP sharer either a router or a modem If the wireless IP sharer Supports DHCP your TV can use a DHCP or static IP address to connect to the wireless network e select a channel for the wireless IP sharer that is not currently being used If the channel set for the wireless IP sharer Is currently being used by another device gt nearby this will result in interference and communication failure e lf you apply a security system other than the systems listed below it will not work with the TV English If Pure High throughput Greenfield 802 11n mode is selected and the Encryption type is set to WEP TKIP or TKIP AES WPS2Mixed for your W
91. t e No If the test pattern is properly displayed select No There may be a problem with your external equipment Please check your connections If the problem persists refer to the external device s user manual English e Sound Test Yes No Use the built in melody sound to check for sound oroblems If you hear no sound from the IV s speakers before performing the sound test make sure Speaker Select is set to TV Speaker in the Sound menu The melody will be heard during the test even if Speaker Select is set to External Speaker or the sound is muted by pressing the MUTE button e Yes If the test pattern does not appear or there is noise in the test pattern select Yes There may be a problem with the TV Contact Samsung s Call Centre for assistance gt e No If the test pattern is properly displayed select No here may be a problem with your external equipment Please check your connections If the problem persists refer to the external device s user manual English e Signal Information digital channels only HDTV channel s reception quality is either perfect or the channels are unavailable Adjust your antenna to increase signal strength e Troubleshooting If the TV seems to have a problem refer to this description If none of these troubleshooting tips apply contact the Samsung customer service centre E Software Upgrade d Software Upgrade can be performed via a broadcasting signal or by network g
92. t connection or downloading the latest firmware from www samsung com to a USB memory device English Installing the Latest Version e By USB Insert a USB drive containing the firmware upgrade file downloaded trom www samsung com into the IV Please be careful not to disconnect the power or remove the USB drive until upgrades are complete The TV will be turned off and on automatically after completing the firmware e The displayed menu may differ depending on the upgrade When software is upgraded video model gt and audio settings you have made will return to their default settings We advise you to to write down your settings so that you can easily reset them after the upgrade TV Rear Panel English e By Online Upgrade the software using the Internet First configure your network For detailed procedures on using the Network Setup refer to the Network Connection instructions If the internet connection doesn t operate properly the connection may be broken Please retry downloading If the problem persists download by USB and upgrade e By Channel Upgrade the software using the broadcasting signal If the function is selected during the software transmission period software will be automatically searched and downloaded The time required to download the software is determined by the signal Status English e Alternative Software backup If there is an issue with the new firmwar
93. t the IP Settings Refer to following How to set up manually English E Network Setup Manual Use the Manual Network Setup when connecting your TV to a network that requires a Static IP address Getting the Network Connection Values To get the Network connection values on most Windows computers follow these steps 1 Right click the Network icon on the bottom right of the screen 2 In the pop up menu that appears click Status 3 On the dialog that appears click the Support tab 4 On the Support Tab click the Details button The Network connection values are displayed English How to set up manually To set up your TV s cable network connection manually follow these steps 1 Follow Steps 1 through 7 in the How to set iP sSettings up automatically procedure IP Mode Manca 2 Select the IP Settings on network test screen 3 Set IP Mode to Manual 4 Press the Y button on your remote to go to the first entry field English Enter the IP Address Subnet Mask Gateway and DNS Server values Use the number buttons on your remote to enter numbers and the arrow buttons to move from one entry field to another When done select the OK The network connection screen appears and network setting is done English E Network Setup WPS PBC How to set up using WPS PBC If your router has a WPS PBC button follow these steps 1 Go to Network Settings screen To enter it NSELE
94. t the channel cannot be selected and viewed NOTE e This function is available only when the Channel Lock is set to On e Edit Channel Name analogue channels only Assign your own channel name This function may not be supported depending on the region e Edit Channel Number Select the channel number to change This function may not be supported depending on the region English Upcoming programme digital channels only View details on the programme being aired on a selected digital channel Search You can search the desired channels according to the settings Reorder when the Antenna was set to Satellite Rearrange the channel manager in numerical order Delete Delete a channel to display the channels you want English Channel Status Display Icons Icon D lt Operations An analogue channel A channel selected A channel set as a Favourites 1 5 A locked channel English 2 Using Favourite Channels for Satellite TV for LED 5700 and above for PDP IV E Favourites Shows all favourite channels e Edit Favourites Gia You can set the selected channels to desired favourites channels The ye symbol wil be displayed and the channel will be set as a favourite gt English 1 On the Channel screen select a channel and press the TOOLS button lf you want to add mulitole channels use the Edit Mode menu in the top right corner of the Channel screen 2 Add or delete a channe
95. t to On The BGM Mode cannot be changed until the BGM has finished loading English _ Media Contents Additional Function Sorting the file list To sort files in the file list select the 9 Sorting by using the 4 gt A w button And then press the ENTER lt button Recorded TV for PDP TV Displays the whole folder You can Folder View view the file name and thumbnail by V V V selecting the folder gt sorts and displays the file title in Title symbol Number Alohabet Special V V V V order Latest Date sorts and shows files by the latest Y V V date Earliest Date or and shows files by the earliest oy fw Y English Category Artist Album Genre Monthly Recorded IV for PDP IV sorts the music file by artist in V alohabetical order sorts the music file by album in V alohabetical order month English Videos Music Photos Play Option menu The following functions are enabled during playback List Retum to the fie list V Previous Next Go to previous next photo file o V Start Slide Show Yi li how Stop Slide Show ou can start or stop a slide show Pf V You can select the slide show speed during the slide Slide Show Speed show Alternatively the lt lt Rew or gt gt FF button NV on the remote can be used Background Music On Background Music You can set and select background music when NV Setting watching a photo file or slide show Picture Mode You can change th
96. ta Service On Off sets whether or not to automatically run data service Auto Run Data Service automatically runs data service without user intervention lf any other secondary function is under way Auto Run Data Service may not work English Using Data Service If the channel you are currently watching provides data service you can enjoy a variety of data services by pressing the or red button Provided Data Service information may vary depending on broadcast While using data service changing the channel using the numeric buttons may not be possible depending on the service 1 Press the button Select a desired service by pressing the A Y 4 gt and OK _ buttons lf Auto Run Data Service is On the data service will automatically run with loading banner In this case the button does not work English 2 Press the red button The data service screen will be displayed 3 Move to a desired option by pressing the amp w 4 gt button on the data service screen and then press OK lt The selected service will be started If a Colour button of a certain function appears on the screen you can use the offered function by pressing the corresponded button If you press EXIT button data service will be closed English Main Data Service buttons and their functions Button Operation OMEA or red button Data Service Displays the Data Service list and immediately starts Data Service BA
97. ted English E Auto Turn Off No Yes setting an Anynet Device to turn off automatically when the TV is turned off If Auto Turn Off is set to Yes running external devices will turn off at the same time as the IV powers off However a device may not turn off if recording Is In progress May not be enabled depending on the device English L Switching between Anynet Devices 1 Press the TOOLS button to select Anynet HDMI CEC And then press the ENTERL4 button to select Device List If you cannot find a device you want select Refresh to refresh the list 2 Select a device and press the ENTERL button You can switch to the selected device The Device List menu will only appear when you set Anynet HDMI CEC to On in the System menu gt English e Switching to the selected device may take up to 2 minutes You cannot cancel the operation during the switching operation e lf you have selected external input mode by pressing the SOURCE button you cannot use the Anynet function Make sure to switch to an Anynet device by using the Device List English _ Listening through a Receiver You can listen to sound through a receiver i e Home Theatre instead of the TV Speaker 1 Select Receiver and set to On 2 Press the EXIT button to exit If your receiver Supports audio only it may not appear in the device list The receiver will work when you Nave properly connected the optical in jack of the rece
98. ternal devices may not support this function e LED Motion Plus Off On QIED Removes drag from fast scenes with a lot of movement to provide a clear picture English E Picture Options MENU Picture Picture Options ENTER C When connecting a PC you can only make changes to the Colour Tone e Colour Tone Cool Standard Warm1 Warm2 Picture Options DEER Warm1 or Warm2 will be deactivated when the picture mode is Dynamic Digital Noise Filter MPEG Noise Filter Settings can be adjusted and stored for each external device connected to an input on the TV Film Mode e he displayed image may differ depending on the model English e Digital Noise Filter Off Low Medium High Auto Auto Visualisation When the broadcast signal is weak some static and ghosting may appear Select one of the options until the best picture is displayed Auto Visualisation When changing analogue channels displays the intensity of the current signal and defines the screen noise filter Only available for analogue channels English e MPEG Noise Filter Off Low Medium High Auto Reduces MPEG noise to provide improved picture quality e HDMI Black Level Low Normal Selects the black level on the screen to adjust the screen depth Available only in HDMI mode RGB signals e Film Mode Off Auto1 Auto2 Cinema Smooth Sets the TV to automatically sense and process film signals from al
99. the amp or Y button to select a different music file within the play list lt To delete a file from My Playlist select the recycle bin icon next to the file you gt want to delete by using the direction buttons English Playing the selected music files 1 On the Music screen in the SMART HUB o renis menu press the 4 gt amp Y button to select a a Edit Mode and then press the ENTERL n D uti O n XS 01 01 03 12 pe 2 Press the 4 a Y button to select IS x o the desired music file in the file list and then s e he displayed image may differ depending on the ENTERL button model English NOTE e he check box mark appears to the left of the selected files e o select all the files in the current page select Select All at the top e o cancel a selection press the ENTER button again 3 Press the 4 gt a button to select Play The selected music files will be play English E Photos 1 Press the 4 A Y button to select the desired file in the file list 2 Press the ENTERL lt button w e When you press the gt Play button Si Eee in the file list slide show will be started ee ae ee ae Immediately English e All files in the file list section will be displayed in the slide show e During the slide show files are displayed in order from currently being shown Music files can be automatically played during the slide show if the Background Music is se
100. ts the channel map You should connect a USB storage to use this function 4d Import from USB Import channel list from USB gt e Export to USB Export channel list to USB this function is available when USB is connected English 2 Changing the Preset Picture Mode MENU Picture Picture Mode ENTER 4 E Picture Mode Select your preferred picture type e Dynamic Suitable for a bright room e Standard Suitable for a normal environment e Natural CHE Relax GRRE Suitable for reducing eye strain e Movie Suitable for watching movies in a dark room e Entertain Suitable for watching movies and games It is only available when connecting a PC English _ Adjusting Picture Settings MENUDO Picture ENTERC E Backlight Cell Light Contrast Brightness Sharpness Colour Tint G R Your television has several setting options for picture quality control In analogue TV Ext AV modes of the PAL system the Tint G R function is not available When connecting a PC you can only make changes to Backlight gt Cell Light QADA Contrast and Brightness Settings can be adjusted and stored for each external device connected to the TV English 2 Changing the Picture Size MENUO Picture Screen Adjustment ENTERL E Screen Adjustment e Picture Size Your cable box satellite receiver may have its own set of screen sizes as well However we highly recommend you use 16 9 mode most
101. use If mounting the TV to the wall we recommend using cables with 90 degree connectors This is part of the product s design and is not a defect PIP functionality is only available when you are using a HDMI PC or components source English Issues The message Scramble signal or Weak Signal No Signal appears You turned the TV off 45 minutes ago and it turned on again There are recurrent picture sound Issues A reaction may occur between the rubber cushion pads on the base stand and the top finish of some furniture solutions and Explanations If you are using a CAM CARD CI Cl check that it is installed into the common interface slot lf there is still a problem pull the CAM CARD out of the TV and insert it into the slot again It is normal The TV operates the OTA Over The Aerial function itself to Upgrade firmware downloaded whilst your watching TV Check and change the signal source To prevent this use felt pads on any surface of the TV that comes in direct contact with furniture English _ Connecting to a COMMON INTERFACE slot E Attaching the Cl Card Adaptor Attach the adapter as shown below To connect the Cl CARD Adapter follow these steps We recommend attaching the adapter before installing 1 Insert the Cl CARD Adapter into the two holes on the product Please find a two holes on the rear of the TV A two holes Is beside the COMMON INTERFACE port TV R
102. usic 1 Press the A Ww button to select the desired music file in the file list Love 2 Press the ENTER button or gt Play n 1 2MB D utt O a n X 01 01 03 12 X e During playing the music you can search lt using the lt lt REW and gt gt FF button English Only displays the files with MP3 extension Other file extensions are not displayed even if they are saved on the same USB device If the sound is abnormal when playing MP3 files adjust the Equalizer in the Sound menu An over modulated MP3 file may cause a sound problem English Creating My Playlist 1 On the Music screen in the SMART HUB menu press the 4 gt a Y button to select Edit Mode and then press the ENTER button 2 Press the a Y button to select the tracks you want to add and press the ENTERL button The check box appears to the left of the selected files To select all the files in the current page select Select All at the top 3 Press the 4 gt 4 w button to select Add to My Playlist Note that selecting My Playlist Initialize will return My Playlist to the default playlist English 4 Press the ENTERL button The message Selected items added to My Playlist is displayed 5 The newly created or updated playlist will be in the main Music page Edit Mode is not accessible in DLNA Playing My Playlist select the My Playlist folder and it will play automatically Press
103. utomatically Go to Network Settings screen To enter it Bi Select a network connection type follow the directions of Network Settings Wired Wireless general Select the Wireless TTA WPS PBC One Foot Connection wireless networks When done it displays a list of the available networks model In the list of networks press the amp or Ww button to select a network and then press the ENTERL lt button If the wireless router is set to Hidden Invisible you have to select Add Network and enter the correct Network Name SSID and Security key to establish the connection English e he displayed image may differ depending on the gt 5 If the Security screen pop up appears go to step 6 If you select the wireless router which does not have security go to step 6 If the wireless router has security enter the QAER Enter Access Point Name SSID to connect security key Security or PIN then select Next When you enter the Security key Security or PIN use amp Y 4 P buttons on your remote to select number MEET cene maerieeerte J Characters model You should be able to find the Pass Phrase on one of the set up screens you used to set up your router or modem English 7 Ihe network connection screen appears and network setting is done If it fails to set Security key Security or PIN select Reset or IP Settings If you want to set connection manually selec
104. ws start menu 2 Click on Appearance and Themes in the Control Panel window and a display Cialog box will appear lt 3 Click on Display and a display dialog box will appear English 4 Navigate to the Settings tab on the display dialog box e he correct size setting resolution Optimum 1920 X 1080 pixels e lf avertical frequency option exists on your display settings dialog box the correct value is 60 or 60 Hz Otherwise just click OK and exit the dialog DOX English 2 Changing the Preset Sound Mode MENU Sound Sound Mode ENTER CC Sound Mode Standard Selects the normal sound mode Music Emphasizes music over voices Movie Provides the best sound for movies Clear Voice Emphasizes voices over other sounds Amplify Increase the intensity of high frequency sound to allow a better listening experience for the hearing impaired lf Speaker Select is set to External Speaker Sound Mode is disabled English 2 Adjusting Sound Settings MENU Sound Sound Effect ENTERL E Sound Effect e SRS TruSurround HD Off On standard sound mode only This function provides a virtual 5 1 channel Surround sound experience through a pair of soeakers using HRTF Head Related Transfer Function technology gt English e SRS TruDialog Off On standard sound mode only This function allows you to increase the intensity of a voice over bac
105. ymbol rate for a cable network search Freq Start Freq Stop Set the start or stop frequency differs in each country Symbol Rate Displays available symbol rates lt Modulation Displays available modulation values E Standby Auto Store Off On E Enables or disables auto tune while TV is In standby mode E Wake up Timer 1 hour later 2 hours later 00 00 02 00 12 00 14 00 HEM Selects the schedule timer to turn the TV on and scan channels automatically English E Manual Tuning scans for a channel manually and stores in the TV If a channel is locked using the Channel Lock function the PIN input window appears e Digital Channel Tuning Scans for a digital channel 1 Press the A w lt gt button to select New When selecting Antenna Air Channel Frequency Bandwidth When selecting Antenna Cable Frequency Modulation Symbol Rate 2 Press the w button to select Search When scanning has finished a Channel is updated in the channel list English e Analogue Channel Tuning Scans for a analogue channel 1 Press the amp Y 4 P button to select New 2 set the Programme Colour System Sound System Channel and Search 3 Press the Y button to select Store When scanning has finished a channel is updated in the channel list English Channel mode e P programme mode When tuning is complete the broadcasting stations in your area have been assigned to pos

Download Pdf Manuals

Related Search

Related Contents

Health Science Applications User Manual  lt17a multímetro digital  製品事故関連情報（2014年度）  Trane VAV-SVX02B-EN User's Manual  Jumpking 12ft User's Manual  Instructions  Manual del propietario de la serie Hornet  Électrovanne proportionnelle compacte  FWPCD1-02 CDMA Fixed Wireless Phone User Manual    

Copyright © All rights reserved. Failed to retrieve file