IR-710 / IR-711UB User's Manual
Contents
1. IR 710 IR 711UB Industrial Cellular VPN Router User s Manual Version 1 0 Nov 2011 www oring networking com ORing Industrial Networking Corp LZ COPYRIGHT NOTICE Copyright 2011 ORing Industrial Networking Corp All rights reserved No part of this publication may be reproduced in any form without the prior written consent of ORing Industrial Networking Corp TRADEMARKS orna SS is a registered trademark of ORing Industrial Networking Corp All other trademarks belong to their respective owners REGULATORY COMPLIANCE STATEMENT Product s associated with this publication complies comply with all applicable regulations Please refer to the Technical Specifications section for more details WARRANTY ORing warrants that all ORing products are free from defects in material and workmanship for a specified warranty period from the invoice date 5 years for most products ORing will repair or replace products found by ORing to be defective within this warranty period with shipment expenses apportioned by ORing and the distributor This warranty does not cover product modifications or repairs done by persons other than ORing approved personnel and this warranty does not apply to ORing products that are misused abused improperly installed or damaged by accidents Please refer to the Technical Specifications section for the actual warranty period s of the product s associated with this publication DISCLA2. Dual band HSUPA 1900 2100 MHz Quad band GSM GPRS EDGE 850 900 1800 1900 MHz WCDMA HSDPA 850 900 1900 2100 MHz Band Option LED Indicators Power Indicator Green On Power is on Status Indicator Green System status indication Fault Indicator Red on WAN connection link down ZE Green on Cellular modem link act Green blinking Cellular modem is transmitting data USB Indicator Green on USB Modem is present Fault Contact Relay Relay output to carry capacity of 1A at 24VDC Power Physical Characteristics Dimension W x D x H 26 1 W x70 D x95 H mm 1 03x2 76x3 74 inches Environmental ORing Industrial Networking Corp 38 IR 710 IR 711UB User s Manual Storage Temperature 40 to 85 C 40 to 185 F Operating Temperature 10 to 55 C 14 to 131 F 20 to 70 C 4 to 158 F Operating Humidity 5 to 95 Non condensing Regulatory approvals EMI FCC Part 15 CISPR EN55022 class A EN61000 4 2 ESD EN61000 4 3 RS EN61000 4 4 EFT EN61000 4 5 Surge EN61000 4 6 CS EN61000 4 8 EN61000 4 11 Warranty 5 years ORing Industrial Networking Corp 39
3. Remote management Set the Remote Management to access the Router web pages from WAN side System Tools gt Remote Management Set the Remote Management to access the Router web pages from WAN side Remote Management Enable Disable Management Port Permission Any Host Host with IP address Host within IP range Sech Miscellaneous Ping System Tools gt Miscellaneous Miscellaneous utilities Ping Test Destination 0 Ping Test Result Miscellaneous Screen The Ping Test is used to send Ping packets to test if a computer whether it is on the Internet or test if the WAN connection is OK Enter a domain or IP in the destination box and click Ping to test ORing Industrial Networking Corp 35 Oring IR 710 IR 711UB User s Manual 5 3 4 System Status System Info System Status gt System Info System Info Model IR 710 Model Description Industrial Cellular VPN router with 1x10 100Base Tl WON Mode Modem 3G ED IP Address 192 168 10 1 Subnet Mask 255 255 255 0 MTJ 1500 MAC Address 00 1E 94 22 55 88 DHCP Server Enabled Retresh System Info Screen This page displays the details information for the router including model name model description firmware version WAN LAN settings System Log System Status gt System Log System log Cl DHCP Server Cl Boot Message Cl NTP Client Cl upnp C Firewall O modem Log Option Select All Deselect All Syst
4. require mppe Routing Option CHAP Secrets Enable Routing Protocols through PPTP VPN Connection e PPTP VPN Screen The following topology shows the common use of PPTP connection from the internet ie WAN Link WAN Link OPEN Server VPN Link er A Ce e Home PC Office PC Connection to PPTP VPN Server ORing Industrial Networking Corp 23 IR 710 IR 711UB User s Manual The following table describes the labels in this screen PPTP Server Enable or disable PPTP VPN Server Enter the server side IP address default is the LAN port IP Client IP Enter the IP address range format is as 192 168 10 xx xx connected client will be assigned the IP address CHAP Secrets Enter the username and password pairs format is as user pass multiple username password pairs are allowed 3 PPTP Client If the router A want to link with the others which is not in the same network with the router A the function of PPTP client should support in the router page Advanced Setting gt Vpn Setting gt PPTP Client PPTP Client settings PPTP Client Enable Disable Server IP Hostname Ir F Options Reconnect on failure default route reguire chap reguire mschap require mschap v2 require mppe Routing Option Enable Routing Protocols through PPTP Client Connection Operations Link Status Disconnected Sa PPTP client settings screen ORing Industrial Networking Corp 24 IR 7
5. 5 LO ae ne ne E E amm am a ee eee E 36 ee Eder 37 Technical Specifications onennnnnnnnnennnnnnnnnnnnnnnnnnnnnannannnna 38 ORing Industrial Networking Corp IR 710 IR 711UB User s Manual Getting to Know your Router 1 1 Overview The ORing IR 710 IR 711UB router is designed to operate in industrial environment The router provides a fast and effective ways of communicating to the internet over wired LAN With built in HSUPA WAN connection IR 710 or an external USB modem IR 711UB the ORing IR 710 IR 711UB router can be mounted in harsh environment easily to provide internet access anytime and anywhere The ORing IR 710 IR 711UB router s VPN capability creates encrypted Virtual Tunnels through the internet allowing remote or traveling users for secured connection with the network in your office 1 2 Software Features m Secured Management by HTTPS Intuitive Web based management user interface for simply and easily operation Functions of firewall provides many security features such as blocking attacks from hacker especially IP Spoofing Ping flood Ping of Death DoS DRDoS Stealth Scan etc HW Advanced firewall configuration to extend the capability and security such as Virtual Server Port Trigger DMZ host UPnP auto Forwarding IP Filter and MAC filter Event Warning by Syslog Email SNMP Trap Relay and Beeper ech LA Hardware Features Built in HSUPA Cellular
6. Enter the port number default is 1194 LZO Compression Enable or disable the LZO Compression Keys Setting Select Auto to use the preset certificates select Manual to paste your certificates Please install software for Open VPN client to generate your certificates and paste them here For more information please visit Open VPN website ORing Industrial Networking Corp 21 IR 710 IR 711UB User s Manual 3 Open VPN Server VS Client WAN Link WAN Link OPEN VPN Client LAN Link OPEN VPN Server LAN Link Client PC WAN PC Server PC The chart above displays the connection of Open VPN Server and Client The Server IP and Client IP address should configure with the same network domain 2 PPTP VPN The PPTP Point to Point Tunneling Protocol VPN feature allows PC connected to the router from WAN port just like connecting in the LAN To create a PPTP connection to the router you should create a PPTP network connection if you are using a window PC The steps are Right click Network gt property gt create a new connection gt connect to my work space VPN gt use VPN to internet gt enter the user name and password which are set in the page ORing Industrial Networking Corp 22 ES Oring IR 710 IR 711UB User s Manual Advanced Setting gt Vpn Setting gt PPTP Vpn PPTP Server settings PPTP Server Enable Disable PPP Options require chap require mschap require mschap v2
7. 10 100Base T X RJ45 fast Ethernet port 10 LED for Ethernet ports speed 11 850 900 1800 2100MHz antenna for internal HSUPA modem IR 710 only 12 Cellular Modem with SIM card slot IR 710 only 3 2 Front Panel LEDs Green Green Blinking Booting up Green On Modem Ready Green Green Blinking Checking Modem status Fault relay Power failure or Red On Port down fail 10 100Base T X Fast Ethernet Ports 100Base T X Port speed to 100Base TX ORing Industrial Networking Corp 6 IR 710 IR 711UB User s Manual Cables and Antenna 4 1 Ethernet Cables The IR 710 IR 711UB router has one 10 100Base T X Ethernet ports According to the link type use CAT 3 4 5 5e UTP cables to connect to any other network device PCs servers switches routers or hubs Please refer to the following table for cable specifications Cable Types and Specifications 10Base T Cat 3 4 5 100 ohm UTP 100 m 328 ft RJ45 100Base T X Cat 5 100 ohm UTP UTP 100 m 328 ft RJ45 4 2 10BASE T 100BASE T X Pin Assignments With 10Base T 100Base T X cable pins 1 and 2 are used for transmitting data and pins 3 and 6 are used for receiving data RJ45 Pin Assignments TD TD RD E le Meet The IR 710 711UB routers supports auto MDI MDI X operation You can use a straight through cable to connect PC and AP The following table below shows the 10Base T 100Base T X MDI and MDI X port pin outs ORing Industrial Networking
8. Corp T IR 710 IR 711UB User s Manual MDI MDI X pins assignment 1 TD transmit RD receive TD transmit RD receive RD receive TD transmit RD receive TD transmit Note and signs represent the polarity of the wires that make up each wire pair 4 3 Wireless Antenna IR 710 only 850 900 1800 2100MHz antenna is used for built in HSUPA modem External RF cable and antenna also can be applied with this connector Cellular Antenna IR 710 only ORing Industrial Networking Corp 8 IR 710 IR 711UB User s Manual Management Interface 9 1 First time Installation Before installing IR 710 IR 711UB router you need to access the router by a computer equipped with an Ethernet card Using an Ethernet card to connect to LAN port is easier and is recommended Basic connection for IR 710 IR 711UB Step 1 Select the Power Source IR 710 IR711UB router can be powered by 12 48V DC power input Step 2 Connect a computer to IR 710 IR711UB Use either an Ethernet cable to connect to ETH of IR 710 IR711UB router to a computer If the LED of the LAN port lights up it indicates the connection is established After that the computer will initiate a DHCP request to get an IP address from the router ORing Industrial Networking Corp 9 ORing IR 710 IR 711UB User s Manual Step 3 Use the web based manager to configure IR 710 IR711UB The default gateway IP of IR 710 IR711U
9. DHCP Client The list shows the MAC address and IP address one to one List relationship ORing Industrial Networking Corp 14 IR 710 IR 711UB User s Manual 5 3 2 Advanced Settings NAT Setting 1 Virtual Server Virtual Server is used for setting up public services on the LAN such as DNS FTP and Email Virtual Server is defined as a Local Port to the LAN servers and all requests from Internet to this Local port will be redirected to the computer specified by the Local IP Any PC that was used for a virtual server must have static or reserved IP Address because its IP address may change when requesting IP by DHCP Advanced Setting gt NAT Setting gt Virtual Server Virtual server settings Virtual Server Enable Disable Description E Public IP all O Specify Public Port Protocol TcP UDP Both Local IP Local Port Enable Now Yes No Virtual server list Public Description Public IP Port Protocol Local IP Local Port Enabled Ops 1 ftp 0 0 St tcp 192 168 0 202 21 Virtual Server The following table describes the labels in this screen Virtual Server Enable or disable Virtual Server Description Enter the description ofthe entry Acceptable characters consist of 0 9 az A Z This field accepts null value Enter the public IP that is allowed to access the virtual service if not specified choose All Public Port The port number on the WAN Wide Area Net
10. Modem with SIM card slot included for WAN connection IR 710 USB port for installing user selectable 3G USB modem for WAN connection IR 711UB 10 100Base T X Ethernet ports for LAN connection individually Power Inputs 12 48 VDC Casing IP 30 Operating Temperature 10 to 55 C Storage Temperature 40 to 85 C Operating Humidity 5 to 95 non condensing ORing Industrial Networking Corp 1 IR 710 IR 711UB User s Manual Hardware Installation 2 1 DIN Rail Installation IR 710 711UB has DIN Rail Kit on rear panel The DIN Rail kit helps AP to fix on the DIN Rail It is easy to install the router on the DIN Rail Ip E SE Fux EEH ORing Industrial Networking Corp 2 IR 710 IR 711UB User s Manual 2 2 Wall Mounted Installation IR 710 711UB has another installation method to secure the router A wall mount panel can be found in the package ORing Industrial Networking Corp 3 IR 710 IR 711UB User s Manual 2 3 SIM Card Installation IR 710 only With IR 710 POWERED DOWN 1 2 Un fasten the screws PWR Status Fault Remove the cover NOTE The cover removal is only for SIM card SIM Card Slot installation DO NOT remove m the Cover IN normal operation Install SIM card into its slot Replace the cover ETH 10 100M O Reset O Do Not Remove O Fasten the screws Important Notice POW
11. POWER OFF THE ROUTER OR PRESS THE RESET BUTTON WHILE THE FIRMWARE IS BEING UPGRADED Save Restore Configurations System Tools gt Save Restore Configurations Save Restore Configurations Save Current Configurations Save Restore previous saved configurations a Restore factory default settings Restore Factory Detault Settings Save Restore Configurations Screen Save The configuration file can be downloaded Internet Explorer user will need to click on the protection bar on top and click choose download files a To help protect your security Internet Explorer blocked this site from downloading files to your computer Click here for A options Download File ee tte the Risk Information Bar Help kal Indiuetrial 209 44 Ala 2 EA The following table describes the labels in this screen Download The current system settings can be saved as a file into your PC configuration Upload configuration The configuration can be restored to the router To reload a system settings file click on Browse to browse your local hard drive and locate the system settings file previously saved Click ORing Industrial Networking Corp 34 IR 710 IR 711UB User s Manual M MW ri Upload when you have selected the file Restore Default You may also reset the router to the factory settings by clicking on Settings Restore Default Settings The router will reboot to validate the default settings
12. choose Disable about the RIPv1 amp v2 in the routers Click Apply and you can see the more information in the Current Routing Table and Static Route Entry which shows the network segment of the other router Current Routing Table Destination Gateway Subnet Mask Metric Interface 192 165 16 0 0 0 0 0 232 202 22 0 L brO LAN 192 168 0 0 0 0 0 0 255 255 25 5 0 ethllWANM 192 168 10 0 192 168 0 10 299 295 205 0 2 ech iiam 12 0 0 0 0 0 0 0 755 0 0 0 O lofLOOPBACE default 192 165 0 1 0 0 0 0 E eth ipw AM Static Route Entry Destination Gatew a Subnet Mack Metric Interface Operations 192 168 10 0 192 168 0 10 Destination Gateway Subnet Mask Metric Interface Operation EO aus zi Gateway gt Disable Telnet Setting Enable Disable Port 2600 Password ORing Industrial Networking Corp 27 Ee Oring IR 710 IR 711UB User s Manual Static route setting screen Use the dynamic routing it will have many ways such as RIP OSPF BGP In this router we use the RIP Protocol to finish the dynamic routing table Switch Se 1 Se 7 Switch Switch PC1 PC2 The Routing Topography RIP Routing Information Protocol is a dynamic routing protocol used in local and wide area networks As such it is classified as an interior gateway protocol IGP using the distance vector routing algorithm After all settings PC1 can visit PC2 which is different network segment
13. of the PC1 ORing Industrial Networking Corp 28 IR 710 IR 711UB User s Manual Miscellaneous DDNS Dynamic Domain Name Server is to keep a domain name linked to a dynamic IP address Advanced Setting gt Miscellaneous gt DDNS DONS settings DONS Service Liser Name Sa Password wm dyndns org Domain NEE ei Szeen a ll eg Use Wildcard woare justlinux Com DDNS Screen For example Choose DDNS Service www 3322 org and configure the following instructions The following table describes the labels in this screen User Name 00909090 Enter the user name for your DDNS account Password Enter the password for your DDNS account Enter the domain names provided by your dynamic DNS service provider Enter the mail server if provided Use Wildcard Check the box the enable wildcard option Miscellaneous SNMP SNMP Settings SNMP settings SNMF Agent Enable Disable SNMP Trap Server 1 SNMP Trap Server 2 ssid SNMP Trap Server 3 00009999 SNMP Trap Server 4 Po SNMP Settings ORing Industrial Networking Corp 29 IR 710 IR 711UB User s Manual The following table describes the labels in this screen flab 17 AAS SNMP Simple Network Management Protocol agent communicates with the SNMP manager The agent provides SNMP Agent management information to the NMS by keeping track of various operational aspects of the system Turn on to open this service and off to disable
14. 10 IR 711UB User s Manual WAN Link WAN Link PPTP VPN Client P PPTP VPN Server LAN Link LAN Link Client PC WAN PC Server PC The following table describes the labels in this screen PPTP Client Enable or disable PPTP Client Server Enter the server IP address or hostname IP Hostname Enter the username and password which is signed by PP TP server word Reconnect on failure Pitch on this option it will be reconnect when the link is on failure Require MPPE Choose Enable Require MPPE Microsoft Point to Point Encryption to encrypt data across Point to Point Protocol PPP and Virtual Private Network links Operations Click Connect to link the server if or not you can click Disconnect to kend break off from the server Link Status Show the status about the link ORing Industrial Networking Corp 29 ORing IR 710 IR 711UB User s Manual Routing Protocol Routing Setting This page shows the information of routing table The initial state of the router connect to the WAN it will be based on the outside networks to access the routing table automatically You can refer the shows about the bellow page Current Routing Table Destination Gateway Subnet Mask Metric Interface 192 165 16 0 0 0 0 0 299 299 299 0 0 brO LAN 192 168 0 0 0 0 0 0 200 209 295 0 0 ech VAN i27 0 0 0 0 0 0 0 222 0 0 0 E lof LOOPBACK default 192 168 0 1 0 0 0 0 O ath1 WAN The table s
15. B router is 192 168 10 1 Start the web browser of your computer and type http 192 168 10 1 in the address box to access the webpage A login window will popup and then enter the default login name admin and password admin Address 192 168 10 1 Connect to 192 168 10 1 Login User name Password Remember my password Login screen 5 2 Router Configuration In this section the web management page will be explained in detail With default setting you can type hitp 192 168 10 1 in the address box of web browser to login the web management interface A login window will be prompted enter username admin amp password admin to login Address 192 158 10 1 v EI Go Connect to 192 168 10 1 Login Remember my password Login screen For security reasons we strongly recommend you to change the password Click on System Tools gt Login Setting and change the password ORing Industrial Networking Corp 10 IR 710 IR 711UB User s Manual 5 3 Main Interface The Home screen will be shown when login successfully o g Industrial Cellular VPN router with 1x10 100Base T X Open zl m Home L Basic Setting _ Advanced Setting L System Tools L System Status Home Welcome to Industrial Cellular VPN router with 1x10 100Base T X configuration page Main Interface In the page you can check the Firmware version the router running time and the WAN IP set
16. ER DOWN THE IR 710 BEFORE INSTALLING SIM CARD 2 4 3GUSB Modem Installation IR 711UB only IR 711UB PWR Status Fault USB 3G USB Modem LD ED NOTE USB modems not included in the package that are tested to be compatible with IR 711UB are listed in the Technical ETH 10 100M Specifications section J Reset ORing Industrial Networking Corp 4 IR 710 IR 711UB User s Manual Hardware Overview 3 1 Front Panel The following table describes the labels that stick on the IR 710 IR 711UB Port Description 10 100 Base T X 10 100Base T X fast Ethernet ports support auto negotiation Fast Ethernet Ports Default Setting Speed auto IR 711UB Mang a MA PWR StatusFault i 4 Ki PWR Status Fault 3 4 USB WAN IR 710 SIM Card Slot Wi i j em ETH 10 100M Reset ORing Industrial Networking Corp 5 IR 710 IR 711UB User s Manual 1 LED for PWR When the PWR links the green LED will light On LED for USB modem status IR 711UB only 3 USB port for 3G USB modem connection LED for Ethernet ports link status IR 711UB only 4 Reset button Push the button 5 seconds for factory default 5 LED for Fault Relay When the fault occurs the red LED will light On 6 LED for Status When the system is ready the green LED will light On 7 LED for WAN When the cellular modem link up the green LED will light On IR 710 only 8 LED for Ethernet port active
17. IMER Information in this publication is intended to be accurate ORing shall not be responsible for its use or infringements on third parties as a result of its use There may occasionally be unintentional errors on this publication ORing reserves the right to revise the contents of this publication without notice CONTACT INFORMATION ORing Industrial Networking Corp 3F No 542 2 Zhongzheng Rd Xindian Dist New Taipei City 23148 Taiwan R O C Tel 886 2 2218 1066 Fax 886 2 2218 1014 Website www oring networking com Technical Support E mail support oring networking com Sales Contact E mail sales oring networking com Headquarters sales oring networking com cn China ORing Industrial Networking Corp IR 710 IR 711UB User s Manual Tables of Contents Getting to Know your Router nnnnnnnnnnnannnnnnnnnnnnnnnnnnananannna 1 1 1 ORG Ma M i O E A EA 1 1 2 OEY AU EEN 1 1 3 PG WANS te 1 Hardware Installation cccccccseeseeeceeeeeeeeeeenecneonsescnenseesaecnsnseeseesneeneeneaes 2 2 1 EINE ER allt AS Ca AU OM EE 2 2 2 Wall Mounted Installation ieneeneneeennenee nne nne enne nene nne nnn enne annan nene 3 2 3 SIM Card Installation IR 710 on 4 2 4 3G USB Modem Installation IR 711UB only ernmerenneeneneenneneena 4 Hardware OVElVICW eege eege 5 3 1 LOMI AHEL EE 5 3 2 FONE ie ER RTE 6 Cables and FCC IA EE 7 4 1 EMEC
18. Manual DHCP Server Enable or Disable the DHCP Server The default setting is Enable The starting IP address of the IP range for the DHCP server The ending IP address of the IP range for the DHCP server The period of time for the IP to be leased Enter the Lease time The default setting is 48 hours Local Domain Name Enter the local domain name of private network Itis optional Current DHCP Client List of the computers on your network that are assigned an IP Information address by internal DHCP server 2 IP Allocation The IP Allocation provides one to one mapping of MAC address to IP address When computers with the MAC address requesting an IP from the IR 710 IR 711UB router it will be assigned with the IP address according to the mapping You can choose one from the client lists and add it to the mapping relationship Basic Setting gt DHCP gt IP Allocation Allocate IP Address Manually Choose a Client to Edit v Copy to MAC Address IP Address Static DHCP Client List MAC Address IP Address Operations Delete All IP Allocation Screen The following table describes the labels in this screen Choose a Client to The list shows the MAC addresses and IP addresses that are already assigned by TAR 120 M12 TAR 3120 M12 Choose one from the list and click Copy to button for editing MAC Address The MAC addresses of the computer IP Address The IP address to be related to the MAC address Static
19. e internet according to their MAC address Advanced Setting gt Security Setting gt MAC Filter MAC Filter settings MAC Filter Enable Disable Rule MAC Address Ir ev 00 11 22 aa bb cc Enable Now Yes Ho IP filter list Description Rule MAC Address Enabled Operations MAC Filter Screen The following table describes the labels in this screen MAC Address Enter the MAC address to be filtered Enable Now Enable the entry after adding it Click Edit for editing the entry click Del to delete the entry VPN Setting VPN Setting is settings that are used to create virtual private tunnels to remote VPN gateways The tunnel technology supports data confidentiality data origin authentication and data integrity of network information by utilizing encapsulation protocols encryption algorithms and hashing algorithms ORing Industrial Networking Corp 19 IR 710 IR 711UB User s Manual 1 Open VPN Open VPN is a full functioned SSL VPN solution which can accommodates a wide range of configurations including remote access site to site VPNs WiFi security and enterprise scale remote access solutions with load balancing failover and fine grained access controls Advanced Setting gt Vpn Setting gt Openvpn Openvpn settings Server settings Openvpn Server Enable Disable Tunnel Protocol Port LZO Compression Enable Disable Keys Setting Clie
20. el EE 7 4 2 10BASE T 100BASE T X Pin Assgnments 7 4 3 Wireless Antenna IR 710 only cccccceeeceeceeeeeeeeeeeeeeeeeeeeeseeuseeseeeeeesaeeeeesaaeeeesaess 8 Management Interface 0nnnonnnnnnnanenanennnnannnannnanennnnnnnnnnnnnnnna ni H 5 1 First time Installation irrerneeneenneneeenne nene nne nne enne annan ne nne anna nene enne na 9 5 2 Router Configuratio EE 10 5 3 ME er 11 5 3 1 Basic Setting EE 11 UA EE 11 LAN WEE 12 Biller 13 5 3 2 Advanced Settings ccccccsssccccsesseecceeececceegeeecesececseseeesseeeessegeeessegeeesseaseeeess 15 RAT CUN DE 15 SEE TAI AE 10 07 eege 18 VAN sellid ss aaa aaa a 19 Routing Protocol Routing Setting mrrnrernnnnnnnnnernnnneennnnenennnenena 26 Miscellaneous RL RT LE 29 dl Te E LEE 29 92 51 15 TEH OOS EE 31 PATA M O eens 31 SEELEN 32 Beleg Seu e EE 32 PROUT PRS SUN a ll m saajate wanes i taa a 33 WMiouitlcCHflefelC el 33 ORing Industrial Networking Corp IR 710 IR 711UB User s Manual Save Restore Configurations cccccsecccccsseeeeeeeeeeeeseeeeeeeseeeeeeeeeeeeeeeeeesaeeeeesseeeeeseaes 34 Remote management KENE 35 Miscellaneous Ping cccccssscecceesececcesseccceaseeeceeuseceeuseeecseueeeceeseesseageeessgeeesseneeeess 39 9 3 ENEE aa aas la aa a ala aj 36 541 518018 e e 9 AAI dcictsbanyscscesyaecs isee tana dia atmes iablemnenes dotrchamn siiacies aes mm a i e 36 24421
21. em Log Refresh Date Time Item Content Apply System Log Screen The router keeps a running log of events and activities occurring on the router several filters are provided for displaying related log entries Click the button Refresh to refresh the page Click the button Clear Logs to clear the log entries ORing Industrial Networking Corp 36 IR 710 IR 711UB User s Manual Traffic Statistics System Status gt Traffic Statistics Traffic statistics Interface Send Receive LAN 258352 Bytes 596 Packets 94343 Bytes 803 Packets WAN 0 Bytes 0 Packets 0 Bytes 0 Packets Retresh Traffic Statistics Screen This page displays the network traffic statistics for both received and transmitted packets through the Ethernet port and wireless connections ORing Industrial Networking Corp 37 ORing IR 710 IR 711UB User s Manual Technical Specifications ORing Router Model IR 710 IR 711UB Physical Ports 10 100 Base T X Ports in RJ45 Auto MDI MDIX Modem Support USB modems and ISDN adapters which support the Communication Device Class Abstract Control Model interface List of tested device Hummingbird huc56s Conexant Huawei E220 E230 Simense HSDPA 180C Prolific 2303 serial modem Quanta MUQ101 Sony Ericsson MD400 MD400g Sierra C885 List Cellular Interface Cellualr Standard GSM GPRS EGPRS EDGE WCDMA HSDPA HSUPA
22. hows the normal routing table 1 Use Dynamic Routing Use the dynamic routing you should not choose Disable about the RIPv1 amp v2 in the routers Click Apply and you can see the more information in the Current Routing Table which shows the network segment of the other router Advanced Setting gt Routing Protocol gt Routing Setting Current Routing Table Destination Gatew 4 Subnet Mack Metric Interface 192 165 16 0 192 168 10 0 192 168 0 10 ee ER 2 eth LW 127 0 0 0 0 0 0 0 235 0 0 0 O lofLOOPBACK default 192 168 0 1 0 0 0 0 O eth LW Static Route Entry Destination Gateway Subnet Mask Metric Interface Operations Destination Gateway Subnet Mask Metric Interface Operation Po PE G WAN w Add Both Telnet Setting Enable 2 Disable Part 2600 Password Routing setting screen ORing Industrial Networking Corp 26 IR 710 IR 711UB User s Manual The following table describes the labels in this screen Lg 7 AAS Current Routing Show the current the routing information Table Static Router Not RIP and enter the right value in the textbox will be showing Entry If you want to the PC in the router can visit the outside network only choose the Gateway Mode if or not you choose the Router Mode RIPv1 amp v2 Choose Disable in the Static routing Telnet Setting Only use in the Dynamic routing 2 Use Static Routing Use the Static routing you should
23. it SNMP Trap Server Specify the IP address of trap server which is the address to 1 4 which SNMP trap messages are sent Community is essentially password to establish trust between Community managers and agents Normally public is used for read write community SysLocation Specify sysLocation string SysContact Specify sysContact string ORing Industrial Networking Corp 30 IR 710 IR 711UB User s Manual 5 3 3 System Tools Date amp Time In this page you can set the date amp time of the device The correct date amp time will be helpful for logging of system events A NTP Network Time Protocol client can be used to synchronize date amp time with NTP server through internet System Tools gt Date amp Time Date Time settings Local Date 2008 Year 1 Month 4 Day Local Time J Hour 12 Minute Second Time Zone CMT AED v Get Current Date amp Time from Browser NTP Enable a time nist gov optional Synchronise Every Day ei at 00 e RE Date amp Time Screen The following table describes the labels in this screen Get Current Date amp Click this button you can set the time from your browser Time from Browser NTP Enable or disable NTP function to synchronize time from the NTP server NTP Server 1 The primary NTP Server NTP Server 2 The secondary NTP Server Synchronize This is the scheduled time when the NTP synchronization performed ORing Indust
24. n 0 to 15 characters in length Retype the password to confirm it Acceptable inputs of this field contains 0 9 az A Z and must be between 0 to 15 characters in length Choose the web management page protocol HTTP and HTTPS are both supported Choose the web management page port number For HTTP default port is 80 For HTTPS default port is 443 HTTPS HTTP over SSL is a Web protocol which encrypts and decrypts user page requests as well as the pages that are returned by the Web server Router Restart If you want restart the router through the Warm Reset click Restart Now to restart the Wireless Router Also you can set a Scheduling time to make the router restart System Tools gt Router Restart Router Restart Utility Restart Mow Scheduling C Enable Restart Every Day vi at LU v i v Firmware Upgrade System Tools gt Firmware Upgrade Router Restart Screen Do HOT power off the router while upgrading Current Firmware Version 1 0f EE BY Firmware Upgrade Screen ORing Industrial Networking Corp 33 IR 710 IR 711UB User s Manual Newer firmware may provide better performance or function extensions To upgrade the new firmware you need a firmware file which matches the model of this AP router It will take several minutes to upload and update the firmware After the upgrade is done successfully reboot the router to utilized new firmware Important Notice DO NOT
25. nt settings Openvpn Client Enable Disable Server IP Host Name Tunnel Protocol Port LZO Compression Enable Disable Keys Setting Open VPN Screen The following topology shows the common use of VPN connection from WAN side 1 Open VPN Server WAN Link WAN Link OPEN Server LAN Link Home PC Office PC Connection to Open VPN Server ORing Industrial Networking Corp 20 IR 710 IR 711UB User s Manual Before connecting to the Open VPN server of IR 710 IR 711UB router please install Open VPN client software for your windows PC It can be downloading from http Open VPN net download html stablel The current version of Open VPN used in IR 710 IR 711UB is version 2 0 9 The corresponding software for client should be installed The following table describes the labels in this screen LZO Compression Enable or disable the function of LZO Compression Keys Setting Select Auto to use the preset certificates select Manual to paste your certificates Please install Open VPN client software to generate your certificates and paste them here For more information please visit Open VPN website 2 Open VPN Client Two routers are needed for creating site to site VPN connection using this mode The following table describes the labels in this screen Open VPN Client Enable or disable the function of Open VPN Client You can A allow or deny the Open VPN Client with this option
26. rial Networking Corp 31 IR 710 IR 711UB User s Manual System Event When the WAN Link Down is triggered the notification procedure will be performed System Tools gt System Event WAN Link Down Alarm Disable WAN Link Down Alarm Enable WAN Link Down Alarm Apply Login Setting At this page the administrator can change the login name and password The default name and password is admin and admin System Tools gt Login Setting Login settings Qld Login Name admin Old Password asses Mew Login Name admin New Password esses Confirm New Password egeee Web Protocol HTTP HTTPS Port Er Login Setting Screen The following table describes the labels in this screen Old Name This field shows the old login name Old Password Before making a new setting you should provide the old password for verification Acceptable characters of this field contains 0 9 az A Z and must be between 0 to 15 characters in length An empty password is also acceptable Enter a new login name Acceptable characters of this field contains 0 9 az A Z and must be between 1 to 15 ORing Industrial Networking Corp 32 IR 710 IR 711UB User s Manual TT characters in length An empty name is not acceptable New Password Confirm New Password Web Protocol Port Enter a new login password Acceptable characters of this field contains 0 9 az A Z and must be betwee
27. rking Corp 16 IR 710 IR 711UB User s Manual Advanced Setting gt NAT Setting gt DMZ DMZ settings DMZ Enable Disable Description DMZ Host IP DMZ Screen The following table describes the labels in this screen Enable or disable the DMZ Description for the DMZ host entry Enter the IP address of the computer to be in the DMZ 4 UPnP The UPnP Universal Plug and Play feature allows the devices such as Internet computers to access the local host resources or devices as needed UPnP devices can be automatically discovered by the UPnP service application on the LAN Advanced Setting gt NAT Setting gt UPnP UPnP settings UPnP Enabled Disabled C Enable MAT PMP UPnP List 4p plication Ext Port Protocal Int Port IP Address Status UPnP Screen The following table describes the labels in this screen eet Gegen disable UPnP Enable NAT PMP NAT PMP allows a computer in a private network behind a NAT router to automatically configure the router to allow parties outside the private network to contact with each other NAT PMP operates with UDP It essentially automates the process of port ORing Industrial Networking Corp 17 forwarding Check the box to enable NAT PMP UPnP List This table lists the current auto port forwarding information IR 710 IR 711UB User s Manual Application The application that generates this port forwarding Ext Po
28. rt The port opened on WAN side Protocol The protocol type Int Port The port redirected to the local computer IP Address The IP address of local computer to be redirected to Status This status shows if the entry is valid or not Security Setting 1 IP Filter Filters are used to deny or allow LAN computers from accessing the internet It also allows or denies WAN hosts to access LAN computers Advanced Setting gt Security Setting gt IP Filter IP filter settings IP Filter Enable Disable Rule Direction Ges Source P 0 Destination ip Protocol All ICMP Specify protocol number TCP Specify port UOP Specify port O E Enable Now Yes Ho IP filter list ZS Description Rule Direction Source IF Destination IP Protocol Port Enabled Operations IP Filter Screen The following table describes the labels in this screen Enable or disable the IP Filter Description Enter description for the entry Select DROP ACCEPT and REJECT rule for the entry Specify the direction of the data flow that is to be filtered ORing Industrial Networking Corp 18 IP Address Enter the IP address of the source and destination computer Protocol Choose which protocol to be filtered IR 710 IR 711UB User s Manual Enable Now Enable the entry after adding it Click edit for editing the entry click Del to delete the entry 2 MAC Filter Filters are used to deny or allow LAN computers from accessing th
29. ting The following table describes the labels in this screen Description Show the current firmware version Show the elapsed time since the AP router is started Show the WAN IP address 5 3 1 Basic Setting WAN The IR 710 IR 711UB router provides Modem 3G connection WAN Connection Type Modem 3G For using this type of connection use the built in HSUPA modem ORing Industrial Networking Corp 11 Basic Sethng gt WAN WAN Settings Phone Number AFM Wiser Name Password Baud Rate DIN Auto Connect 460800 w C Enable PIN check before dialing PIN Code Enable IR 710 IR 711UB User s Manual Reconnect on Failure Enable Fast Mode L Enable Device Status Modem is not present Operations Link Status Disconnected Modem Status Operator RadioType Signal Quality Save Refresh Modem 3G Screen The following table describes the labels in this screen UserName Username provea ty yowis PING Enter the PIN code if PIN check is required Auto Connect If this option is enabled the connection will be called up when router boots up Device Status Show the status of built in HSUPA modem device Operations Click Connect to call up the built in HSUPA modem Click Disconnect to shut down the connection Link Status Show the status of connection up down or connecting LAN These are the IP settings of the LAN interface for the IR 710 IR 711UB ro
30. uter The LAN IP address is privately for your internal network and cannot be exposed on the Internet ORing Industrial Networking Corp Oring IR 710 IR 711UB User s Manual Basic Setting gt LAN LAN Side settings IP Address 192 168 10 1 Subnet Mask 255 255 255 0 LAN Screen The following table describes the labels in this screen IP Address The IP address of the LAN interface the default IP address is 192 168 10 1 The Subnet Mask of the LAN interface the default Subnet mask is 255 255 255 0 DHCP DHCP stands for Dynamic Host Control Protocol The IR 710 IR 711UB was built in DHCP server The internal DHCP server will assign an IP address to the computers DHCP client on the LAN automatically Set your computers to be DHCP clients by setting their TCP IP settings to obtain an IP address automatically The DHCP server will allocate an unused IP address from the IP address pool to the requesting computer automatically 1 DHCP Sever Basic Sething gt DHCP gt DHCP Server Set DHCP Server DHCP Server Enabled Disabled Starting IP 192 168 102 Ending IP 192 168 1010 Lease Time 48 Hours Local Domain Name optional Current DHCP Client Information HostName Mac static IP Allocation Setup E DHCP Server Screen The following table describes the labels in this screen ORing Industrial Networking Corp Expires In IR 710 IR 711UB User s
31. work side that will be used to access the virtual service ORing Industrial Networking Corp 15 IR 710 IR 711UB User s Manual 2 Port Trigger Some applications require multiple connections like Internet games video conferencing Internet calling and so on These applications cannot work with a pure NAT router Port Trigger is used for some of the applications that can work with an NAT router Advanced Setting gt NAT Setting gt Port Trigger Port Trigger settings Port Trigger Enable Disable Description Trigger Port Trigger Protocol TcP UDP Both Incoming Port Incoming Protocol TcP UDP Both Port Trigger List shis Trigger Trigger Incoming Incoming Description Protocol Port Protocol Port Enable Ops 1 pp tep 21 tep 23 32 32 2222 Port Trigger Screen The following table describes the labels in this screen Incoming Port This is the port number on the WAN side that will be used to access the application Enable Enable the rule after adding the entry Port Trigger List Click Edit to edit the entry click Del to delete the entry 3 DMZ It allows a computer to be exposed to the Internet This feature is useful for gaming purposes Enter the IP address of the internal computer that will be the DMZ host Adding a client to the DMZ may expose your local network with variety of security risks so only use this option carefully ORing Industrial Netwo
Download Pdf Manuals
Related Search