Home

OT-ATA200SP+ 1 FXS + 1 PSTN SIP/IAX ATA User Manual

1. VLAN ID check is disable OT ATA200SP will handle the packets even from different vian ID Please notice that VLAN ID check is enable in default Copyright Notice No part of this document may be reproduced transmitted transcribed stored in a retrieval system or translated into any language in any form or by any means electronic mechanical magnetic optical chemical manual or otherwise without the prior written permission of OverTek Disclaimer Notice No license is granted implied or otherwise under any patent or patent rights of OverTek OverTek makes no warranties implied or otherwise in regard to this document and to the products described in this document The information provided by this document is believed to be accurate and reliable to the publication date of this document However OverTek assumes no responsibility for any errors in this document Furthermore OverTek assumes no responsibility for the use or misuse of the information in this document and for any patent infringements that may arise from the use of this document The information and product specifications within this document are subject to change at any time without notice and without obligation to notify any person of such change OverTek www overtek com br OverTek 32 32 www overtek com br
2. Macan free MS MMI filter is used to make access limit to OT ATA200SP Gateway When MMI filter is enable Only IP address within the start IP and end IP can access OT ATA200SP gateway 2 5 9 Audio Settings PHONE psp Roese et oo Flashhook Min Time 200 Flashhook Max Time joo lt 1000ms oe Bee CODEC select the prefer CODEC support ulaw alaw and G729 Signal Standard Support CHINA Japan and USA standard Input Volume Handset in volume Output Volume Handset out volume G729 Payload Length G729 payload length VAD Enable disable Voice Activity Detection FAX Mode select the FAX Mode OverTek 17 32 www overtek com br OVERIEK OT ATA200SP VoIP ATA User Manual 2 5 10 VPN SECURITY ER vz wel E kel SS ML of m KAS M fn D ee PS Z Le E u zZ VPN Mode L2TP Oper 1 Enable VPN ki DS Kl 2 wc K VPN User Name Kl v PPTP User Name li lt this page is VPN setting page the Gateway support the VPN with UDP and L2TP protocol The parameters is as below VPN IP After VPN registered successfully VPN server will give an IP aggress to the terminal If there is a IP address shown on terminal except for 0 0 0 0 it means your VPN has registered UDP Tunnel VPN Server Addr register to the address of VPN server VPN Server Port Register to the port of VPN server Server Group ID the gr
3. 4569 Phone Number Phone number of your IAX account OverTek 11 32 www overtek com br IEN OVERIEK OT ATA200SP VoIP ATA User Manual Voice mail number If the AX support voice mail but your username of the voice mail is letters which you can not input with the ATA then you use the number to stand for your username Voice mail text if IAX support voice mail config the domain name of your mail box here Echo test number If the platform support echo test and the number is test form the config the test number to replace the text format The echo test is to test the woring status of terminals and platform Echo test text echo test number in text format Refresh time IAX refresh time Enable Register enable or disable register IAX Default Protocol Set AX 2 as the default protocol if not the system will choose SIP as default Enable G 729 Using G 729 speech coding mandatory consultations 2 5 Advance 2 5 1 DHCP Server NETWORK RZ RER EH Ee Ed DHCP SERVER DHCP Leased Table Leased 1P address ent Hardware Address DHCP Lease Table eet II teen ine E Jemena ons lan 192 168 10 2 192 168 10 30 255 255 255 0 192 168 10 1 192 168 10 1 DHCP Lease Table Setting DHCP Lease Table Delete DNS relay Setting DHCP server manage page User may trace and modify DHCP server information in this page Update Mode Using DHCP updated model None expressed are not updated Update firmware update firmware is used to DHCP
4. Elte TT gd Mees W sch e VLAN ID Check Enable VoIP Other VLAN differentiated i entiated ise Enable pitservvale br 3 if Data Voice VLAN differentiated is Tag differentiated and diffServ are both enable Then device will distinguish the voice signaling and data stream to VLAN ID setting As below NETWORK Pe W I cos ere Mews ech e VLAN ID Check Enable DiffServ Enable APPLY Or NETWORK PA WII cos Eanes iua Mewar VLAN Enable VLAN ID Check Enable VoIP Other VLAN differentiated Differentiated 4 if Data Voice VLAN differentiated is Date untaged and diffServ are both enable Then device will undistinguish the date to VLAN ID setting As below OverTek 31 32 www overtek com br TX OVERIEK OT ATA200SP VoIP ATA User Manual NETWORK PN WIR cos Ee TT d MISE e vc e S VLAN Enable VLAN ID Check Enable VoIP Other VLAN differentiated Undifferentiated DiffServ Enable DiffServ Value Ox bs VoIP Data 302 1P Priority o 0 7 Other Data 802 1P Priority o 0 7 VoIP Data VLAN ID 256 0 4095 Other Data VLAN ID 254 0 4095 5 if VLAN is disable Device won t add any vlan ID to the stream In this case if the Diffserv is enable the DiffServ value response to the voice signaling stream 6 When VLAN function is enable If VLAN ID check is enable OT ATA200SP will have strict requirement on the VLAN it won t handle any packets with different VLAN ID If
5. Manual PHONE REM cau service eu y Call Service Setting wou eier Keen pawor 1 wiest Ir tovon seconds o l Ee gt Call Forward Forward when busy select Busy in the Call Forward Field and Key in the destination phone number in the Forward Number If some one calls you when you having a call the caller will be forwarded to the destination number Forward no answer Select No Answer in the Call Forward Field and Key in the destination phone number in the Forward Number fill the time in the No Answer Time If some one calls you and no one answer the caller during the No Answer Time the call will be forward to the destination number Forward Always Select Always in the Call Forward Field and Key in the destination phone number in the Forward Number then any one calls this gateway will be forward to the destination number gt Call Transfer Check the Enable Call Transfer If A is the OT ATA200SP user and B calls and talking with A through VoIP A can press the Hook Flash to hold the call with B and then press and then enter C s number B will be transferred to C and can talk with C gt 3 Way Conference Calls Check Enable Three Way Call Only sip protocol support this function Assume A is the OT ATA200SP user and B calls and talking with A through VoIP A can press Hook Flash to hold the call with B then enter C s number to talk with C and then press Hook Flash again switch back
6. Protocol VAD CNG save bandwidth Telnet Internet s remote login protocol DNS Domain Name Server TFTP Trivial File Transfer Protocol HTTP Hyper Text Transfer protocol FTP File Transfer protocol RFC3362 T 38 protocol 1 6 Compliant Standards OverTek CE EN55024 EN55022 FCC part15 comply with ROHS in EU comply with ROHS in China 5 32 OT ATA200SP VoIP ATA User Manual www overtek com br eh OVERIEK OT ATA200SP VoIP ATA User Manual CH e Explanation The letter e is the first letter of environment and electronic The rim is a round with two arrow stands for recycle The number 20 stands for the years of environment protection Please note the years of environment protection is not discarding year nor usage life 1 7 Operating requirement Operation temperature 0 to 40 C 32 to 104 F Storage temperature 30 to 65 C 22 to 149 F Humidity 10 to 90 no dew 1 8 Package Size 128 x 85x 30mm Packing List v OT ATA200SP ATA Y Power adaptor 12v 500mA v Manual CD OverTek 6 32 www overtek com br 7X OVERIEK OT ATA200SP VoIP ATA User Manual 1 9 Installation Use Ethernet cable to connect OT ATA200SP s LAN port and your computer Set your computer s ip to the network 192 168 10 x or using dynamic obtain IP Open your web browser and key in 192 168 10 1 Then you will see the logon pageof OT ATA200SP the default username and password is a
7. Value Configure Diffserv parameter The value range value range 0x28 0x30 0x38 0x48 0x50 0x58 0x68 0x70 0x78 0x88 0x90 0x98 Oxb8 default is Oxb8 oxb8 stands for best fast transmission 28 30 is guaThrantee for the transmission priority for the 1st rank 48 58 is guarantee for the transmission priority for the 2nd rank 68 78 is guarantee for the transmission priority for the 3rd rank 88 98 is guarantee for the transmission priority for the 4th rank 6 Data VLAN ID Assign VLAN id for data stream 7 Data 802 1P Priority Configure the priority of the data packets non voice signaling data in 802 1p protocol 8 Data Voice DiffServ differentiated undifferentiated for Date and voice VLAN is not distinction VLAN tag Tag differentiated for Date and Voice VLAN is distinction VLAN tag Date untagged for Date VLAN is distinction VLAN tag Please refer to VLAN implement for detail OverTek 14 32 www overtek com br OVERIEK OT ATA200SP VoIP ATA User Manual 2 5 5 Advance SIP settings This page is used to set the private sip server stun server and back up sip server information STUN Server setting STUN Server Addr configure stun server address STUN Server Port configure stun server port default 3478 STUN Effect Time stun detect NAT type circle unit minute Enable SIP STUN enable disable stun Please refer to sip conf for the setting for how to set the public alter server Private Server Type The particula
8. lH e OVERIEK OT ATA200SP VoIP ATA User Manual OT ATA200SP 1 FXS 1 PSTN SIP IAX ATA User Manual OverTek ALL RIGHTS RESERVED OverTek 1 32 www overtek com br Geh OVERIEK OverTek OT ATA200SP VoIP ATA User Manual CONTENT OO EE ee 4 OL PAD SA e 4 Ber MA COVA e 4 BCS eg lee elle eg de 4 DAS OPCW AO ee 4 TSA Gal di ING Protocols EE 5 1 6 Compliant SANG Ee EE 5 1 7 Operating requirement deeg 6 E E 6 ESCH EE e e DEE 7 Web Confeuration cccccsssssscccessccceesseccceseaececeseeeceeesseeseeceeseeeceessaeeessaeasecessuasecessuaeeeeeeeseaes 7 2 1 Access Web Setting page ccssccccsssseecccessecccceesececcessseececseesscccseuseececsusececseneeeceseaeess 7 Zc CU NMG SCAU E T I E E E E EN A EN 8 Zi NONO EE 9 PAS EE OMS EE 9 2 3 2 LAN Config ee 10 E Re TT 10 2A Macs OU UE 10 Die NAIK CONTE eascetsoivvenplacisessnvunniyedsavbnetatsdenteurtbtbacaderieaennsindnaanwivenhtncanrininiahieaianacanedss 11 E E e 13 LoL DACP SAIW E 13 e ME 14 SE Ee e E 15 Ze OO SOU GS accautenatsciacanccossencismsteecatanesecaaaunssh A E EA EE 16 Zo OV AN CS OIF dn EE 17 Zo DIC EC EE 18 2 5 7 Call Service e dE 19 Zs MME FRITET et 19 2 39 AUGIO Ke Lt 20 DOVE IN WE 20 2 0 Dial Peer Settings better 21 2 7 COWS Manage ee 21 Pi WG AI aa E AEE E E E EEE 22 Ze SVS OM NM ANAE E ee 24 AI Ee ee EE 24 2 9 2 SISO 2 CONTE anssen na E E N EAN RT 24 SR SCL E E E E E A N A A EA A E 25 E e n ele EE 25 PVR SOT UNA NPE E PE A P E ET A A E AT
9. sent immediately OXXxXxxxx 8 digits numbers begin with 9 will be sent immediately 911 Number 911 will be sent will be immediately 99xT4 3 digits numbers begin with 99 with be sent after four seconds 2 5 7 Call Service Settings PHONE SI cau service Oe _ k Call Service Setting pwwo accept anya A Ban outgoing 7 Black List Black List Limit List Limit List User configure the value add service such as hotline call forward call transfer 3 way conference call etc in this page Hotline configure hotline number OT ATA200SP immediately dials this number after hook off if it is set Call Forward Please refer to value add service for detail No Disturb DND do not disturb enable this option to refuse any calls Ban Outgoing Enable this to ban outgoing calls Enable Call Transfer Please refer to value add service for detail Enable Three Way Call Please refer to value add service for detail Enable Call Waiting Enable disable Call Waiting Accept Any Call If this option is disable OT ATA200SP refuse the incoming call when the called number is different from OT ATA200SP s phone number OverTek 16 32 www overtek com br OVERIEK OT ATA200SP VoIP ATA User Manual No Answer Time no answer call forward time setting Black List incoming call in these phone numbers will be refused Limit List outgoing calls with these phone numbers will be refused 2 5 8 MMI Filter SECURITY MMI FILTER
10. to user B then A can press to make 3 way conference calls Notice A can press Hook Flash to switch between B and C or press to cancel the current call and switch to the other user VLAN implement OT ATA200SP support rich 802 1Q P protocol and Diffserv configuration Through its flexible VLAN function you can set the voice signaling and data packets in different VLAN via different VLAN id OverTek 29 32 www overtek com br OVERIEK OT ATA200SP VoIP ATA User Manual Different implement of VLAN function 1 if Data Voice VLAN differentiated is undifferentiated Device will set the same vlan ID for voice and data As show below NETWORK Pe WEN cos Eer IT Mea E VLAN ID Check Enable VoIP Other VLAN differentiated Undifferentiated d l i 4 tery Enable pittserv value oe g VoIP Data VLAN ID 255 D 4095 Other Data VLAN ID 254 D 4095 Or NETWORK Pe mene cos Ee Ted e A VLAN Enable 2 if Data Voice VLAN differentiated is Tag differentiated but the DiffServ is disable Device won t distinguish the voice signaling and data stream It will add the same data vlan id to them As below NETWORK RI WI cos Esved iu Meana A VLAN Enable VLAN ID Check Enable VoIP Other VLAN differentiated Differentiated Ke vorr pata 02 10 priory 0 7 omer vata sozap priory fo Or OverTek 30 32 www overtek com br OVERIEK OT ATA200SP VoIP ATA User Manual NETWORK RI W I cos
11. AN port NAT Enable NAT 2 4 VOIP 2 4 1 SIP Config VOIP XZ WI WIRE SIP Line Select Basic Setting E HEH D B Server name ama proxy server address Server address oeaan kezsssp O OOS server ot kees Password pe omenen pS Advanced Set 5060 016 Setting page of public SIP server Register Server Addr Register address of public SIP server Register Server Port Register port of public SIP server Register Username Username of your SIP account Always the same as the phone number Register Password Password of your SIP account Proxy Server Addr IP address of proxy SIP server SIP provider always use the same IP for register server and proxy server in this case you don t need to configure the proxy server information Proxy Server Port Signal port of SIP proxy Proxy Username proxy server username Proxy Password proxy server password OverTek 10 32 www overtek com br IEN OVERIEK OT ATA200SP VoIP ATA User Manual Domain Realm SIP domain enter the sip domain if any otherwise OT ATA200SP will use the proxy server address as sip domain Local SIP port Local SIP register port default 5060 Phone Number Phone number of your SIP account Register Expire Time register expire time default is 600 seconds OT ATA200SP will auto configure this expire time to the server recommended setting if it is different from the SIP server Detect Interval Time Co work with the Auto Detect S
12. Boot Params 3 Clear Conf ig 4 Exit Please enter your number OT ATA200SP provide safe mode When there is booting problem because of setting problem or firmware problem User can restore the factory setting or upgrade to a new firmware to solve this problem How to enter safe mode In the OT ATA200SP booting procedure it use the static ip 192 168 1 179 WAN port IP for a short time user can telnet to this ip address in this occasion to enter the save mode remember to change your PC into the network 192 168 1 xx Then user can according the guide in post mode to clear the settings or upgrade the firmware 8 FAQ How many SIP servers may OT ATA200SP register simultaneously OverTek 26 32 www overtek com br IEN OVERIEK OT ATA200SP VoIP ATA User Manual OT ATA200SP support 2 SIP servers and 1 IAX server The Default server is SIP If you want to use the IAX server you must set IAX as default protocol in the IAX config page IAX and SIP can register simultaneously but not work simultaneously If you set 2 SIP servers in the SIP setting page you can choose the route server by dialing plan which is edited by you Please see How to use the dial rule for detail How can know the OT ATA200SP s IP address Pick up the handset and then dial 111 and the OT ATA200SP will promote you its IP address How to use OT ATA200SP s Lifeline function OT ATA200SP supports Lifeline function you can use the sa
13. E T E ones 26 Telnet Console sairossirnnin a A E S 27 o Ni geet 27 AA Global ONAN NAG EE 28 2 32 www overtek com br TX OVERIEK OverTek UN eege 28 Or Network DSO E 29 7 Restore TOF Ot Ce eene EE 29 8 POST Mode safe i TEE 30 E ee 30 How many SIP servers may OT ATA200SP register simultaneously ccceeeeeeeeeees 30 How can I know the OT ATA200SP s IP address cssssccccssssseecceessececceesececeeeeeeeeeseeseeseuees 30 How to use OT ATA200SP s Lifeline FUNCTION ceeccccccsssseceecceeeecceseeesceesseeececseeeeeseaneeeeees 30 Why the settings vanish after reboot cceeccccccsssecccceseeccececeeeceseeeseeceeseeeeessaaeeessaaneeeseaees 30 HOW to use ihe dial rule ncascsecccussnensacveutoanedeaiacusacseausesatsiiesaehunanamsaanduattoninsedanassseptsindasaceasateqaueaesieess 31 How to use speed dial TING HON E 32 HOW to conneure digital Man KE 32 How to use Call Forward Call Transfer and 3 way Conference called 32 VEAN TPIS ME E 33 3 32 www overtek com br OT ATA200SP VoIP ATA User Manual 7X OVERIEK OT ATA200SP VoIP ATA User Manual 1 OT ATA200SP Features 1 1 Appearance PWR power connection status SYS server registration status registered on gliting not registered off WAN WAN port connectiong contected on offline off LAN LAN port connectiong contected on offline off PSTN light on when PSTN call come in out VoIP light on when VolP cal
14. OIP CONFIG FILE gt gt Version 1 0007 lt GLOBLE CONFIG MODULE gt ConfFile Version 7 OverTek 20 32 www overtek com br OVERIEK OT ATA200SP VoIP ATA User Manual 2 8 System Manage 2 8 1 Account Manage MAINTENANCE if GEI WS WT ACCOUNT Sieg 8 2 a ssid User Set Set web access account or keypad password of OT ATA200SP 2 8 2 Syslog Config MAINTENANCE Neeson SYSLOG eddi WG Bssd ig zeg Syslog Set Server IP set the syslog server address Server Port set the syslog server port MGR Log Level set the MGR log level SIP Log Level set the SIP log level IAX2 Log Level set the IAX2 log level Please click apply after setting OverTek 21 32 www overtek com br OVERIEK OT ATA200SP VoIP ATA User Manual 2 8 3 Time Set NETWORK Server type the ip address of time server Time zone select correct time zone in list box Timeout longest response time for SNTP Manual Time set The time setting Daylight Daylight Saving time 2 8 4 Logout amp Reboot Reboot Gateway some setting needs to reboot to make it works Please always save config before reboot otherwise the setting will return to previous setting MAINTENANCE Riet Make Meese Ml wis Mm eeet ies REBOOT Reboot Phone Press the Reboot button to reboot Phone OverTek 22 32 www overtek com br IEN OVERIEK OT ATA200SP VoIP ATA User Manual 3 IVR setting User may pre config OT ATA200SP gateway using a norma
15. Update file is used to configure DHCP updated configuration files Tftp Server Addresses using TFTP server upgrade DNS Relay enable DNS relay function User may use below setting to add a new lease table Lease Table Name Lease table name Lease Time DHCP server lease time Start IP Start IP of lease table End IP End IP of lease table Network device connecting to the OT ATA200SP LAN port can dynamic obtain the OverTek 12 32 www overtek com br 7X OVERIEK OT ATA200SP VoIP ATA User Manual IP in the range between start IP and end IP Netmask Netmask of lease table Gateway Default gateway of lease table DNS default DNS server of lease table Notice This setting won t take effect unless you save the config and reboot the device 2 5 2 NAT SECURITY Protocol Set IPSec ALG PPTP ALG NAT Table ite ectecgspen outside UDP Pork NAT Table Option Advance NAT setting Maximum 10 items for TCP and UDP port mapping IPSec ALG Enable Disable IPSec ALG FTP ALG Enable Disable FTP ALG PPTP ALG Enable Disable PPTP ALG Transfer Type Transfer type using port mapping Inside IP LAN device IP for port mapping Inside Port LAN device port for port mapping Outside Port WAN port for port mapping Click Add to add new port mapping item and Delete to delete current port mapping item 2 5 3 Net Service NETWORK Ws Me ORT SERVICE PORT RIESS MO S HTTP Port configure HTTP transfer port defa
16. ber in the dial rule as 010T and set the Alias as rep 8610 and set the Del Length to 3 Then all calls begin with 010 will be changed to 8610 xxxxxxxx Suffix optional Configure suffix show no suffix if not set Instance VOIP DIAL PEER Dial Peer Table 2T rule If the call starts with 2 the first 2 will be deleted and the rest number will be sent to private server 3T rule If the call starts with 3 the first 3 will be deleted and the rest number with be sent to public server 123 rule Dial 123 and will send 8675583018049 to your server Used as speed dial function OT rule If the calls is begin with O the first O will be replace by 86 Means that if you dial 075583018049 and OT ATA200SP will send 8675583018049 to your server T rule Dial the and the line with switch to PSTN Note that you need to set another rule Prefix Number Length 1 in the Digital Map Refer How to use OT ATA200SP s Lifeline Function 179 rule when you dial 179 the call with send to 192 168 1 179 suit for LAN application without set up a sip server How to use speed dial function Please refer to How to use dial rule How to configure digital map Please refer digit map settings How to use Call Forward Call Transfer and 3 way Conference calls User may set up the configuration in the Call Service page to use these value add service OverTek 28 32 www overtek com br TX OVERIEK OT ATA200SP VoIP ATA User
17. dmin admin for administrator and guest guest for guest Set up page for VoIP use only Analog Phone User PC 2 Web Configuration 2 1 Access Web setting page Enter OT ATA200SP IP address in the web browser and press ENTER to go to the log on page and key in the username and password to access OT ATA200SP setting page Default username and password is Administrator Username admin password admin User Username guest Username guest OverTek 7 32 www overtek com br OVERIEK OT ATA200SP VoIP ATA User Manual Username Password 2 2 Current state BASIC status B wa o w O gen roo pucrsener on DAdiress mee S Gateway ue OO OOOO S O Phone Number ma emm ed Version VOIP Gateway V1 0 201 16 This page shows OT ATA200SP s running state Network shows the WAN and LAN port connecting state and current settings VolP show the default protocol the working state of SIP and IAX2 you can see whether OT ATA200SP has registered the public sip server and IAX2 server Phone Number shows the public sip server the private sip server and the IAX2 server phone numbers OverTek 8 32 www overtek com br TX OVERIEK OT ATA200SP VoIP ATA User Manual 2 3 Network 2 3 1 Wan Config NETWORK wan EPON SIM Bes esa TS ES a uch e S vg Peace Omenaa ssas OOOO MAC Address 00 09 90 13 1f 90 WAN Setting DHCPO PPPOE Connected sae eee pee WAN port network setting page Support
18. erver if Auto Detect Server is enable OT ATA200SP will periodically detect if the SIP server is available according this setting RFC Protocol Edition Current OT ATA200SP SIP versions Set to RFC 2543 if the gate need to communicate to devices such as CISCO5300 using the SIP 1 0 Default is RFC 3261 Enable Register Enable Disable SIP register OT ATA200SP won t sent register info to SIP server DTMF Mode DTMF signal sending mode support RFC2833 DTMF_RELAY inband audio and SIP info Auto Detect server co work with Server Auto Swap and Detect Interval Time Enable this option OT ATA200SP will periodically detect whether the public SIP server is available if the server is unavailable the OT ATA200SP will switch to the back up SIP sever and continue detecting the public sip server OT ATA200SP will switch back to the primary SIP server if the server is available again Server Auto Swap Please refer to Auto Detect server for detail Enable Via rport config the supporting for RFC 3581 SIP Default Protocol Setting for the default protocol of SIP 2 4 2 lax2 Config Setting page of public IAX server IAX Server Addr Register address of public IAX server IAX Server Port Register port of public IAX server default port is 4569 Account Name Username of your SIP account Always the same as the phone number Account Password Password of your IAX account Local port Signal port of local default port is
19. has comments such as lt command gt or lt node gt to distinguish sub nodes and local command Type help or in command can see all parameters using in this command When typing node name or command user no need to key the full name use TAB button will make it more efficient There are two types in command parameters optional and required required parameter use dd A dd A or then press TAB button for complementarily aS dd A prefix and optional use _ as prefix User may type 4 2 Global Command Global command is available under all nodes OT ATA200SP support following commands Command Function Example o Return to parent node logout ping sd Ping command use to check network ping www stephen tele com Save setting to flash 4 3 Tree Structure 4 3 1 Debug Level 0 7 path lt debug gt show debug setting show disable Jenable debug all modules no all xxx disable Jenable debug app module no app xxx disableJenable debug cdr module no cdr xxx disableJenable debug sip module no sip xxx disableJenable debug tel module no tel xxx disableJenable debug dsp module no dsp xxx OverTek 24 32 www overtek com br TX OVERIEK 4 3 2 reload usage reload Reboot system 4 3 3 show system running info gt basic path lt show gt show network status Example lt show gt basic Show ip packets Stat Example lt show gt
20. ip ip Show RTP packets Stat Example lt show gt ip rtp Show TCP packets Stat Example lt show gt H ip tcp Show UDP packets Stat Example lt show gt ip udp gt memory path lt show gt show gateway memory Example lt show gt memory gt nat path lt show gt show NAT information Example lt show gt nat gt uptime path lt show gt show running time Example lt show gt uptime gt version path lt show gt show gateway version Example lt show gt version 4 3 4 telnet and logout Usage telnet target port Login xxx Password xxx logout OverTek 25 32 OT ATA200SP VoIP ATA User Manual www overtek com br IEN OVERIEK OT ATA200SP VoIP ATA User Manual 4 3 5 tracert trace network path info usage tracert host Example tracert www google com 5 Network Diagnosis There are some telnet commands for checking your network Now Listing below for your information pn Check if the destination is accessible ping www stephen tele com Show network path info tracert www stephen tele com 6 Restore to factory default setdefault clear gateway settings expect network part setdefault all clear all settings 7 POST Mode safe mode o Telnet 192 168 10 1 UolP System Boot BOARD INFIKHEGNH ADATEK 51280 ATACPU ADNSI20 Home Gateway Processor POST Uersion UWi 2 8M SDRAM gt Creation Date Dec 7 2RRASG 18 16 46 POST Menu Lil TFTP Client Download L21 Print
21. l come in out The default status when pick up the call is VoIP call out 1 2 Interface Power Output Power 12VDC 500mA Port RJ11 port Connect to handset or the Lifeline accessory WAN RJ45 port LAN RJ45 port 1 3 Electricity characteristic Speciality of electric output the 12V 500mA DC The network connects 2 RJ45 connect a WAN a LAN FXS 2 port 1 4 Software OverTek 4 32 www overtek com br upport two sip servers running at the same time Back up sip server support OVERIEK NAT Firewall DHCP client and server Support PPPoE used for ADSL cable modem connecting Support major G7 xxx CODEC VAD CNG G 165 compliant 16ms echo cancellation Tone generation and Local DTMF re generation according with ITU T E 164 dial plan and customized dial rules Support Lifeline Hotline Speed Dial Call Forward Call Transfer 3 way conference calls Caller ID display DND Do Not Disturb Black List Limit List Upgrade firmware through FTP or HTTP Web management Reverse polarity Telnet remote management Voice prompt adjustable user password and super password 1 5 Standard and Protocols IEEE 802 3 802 3 u 10 Base T 100Base TX PPPoE PPP Protocol over Ethernet DHCP Client and Server Dynamic Host Configuration Protocol G 711 u a G729 audio Codec SIP RFC3261 RFC 2543 IAX2 TCP IP Internet transfer and control protocol RTP Real time Transport Protocol RTCP Real time Control
22. l phone connecting to OT ATA200SP please refer the below command Notice all command below can be end with to speed response tz ok kM reboot gateway 000 clear settings 100 set the IP type to static ip 101 set IP type to DHCP 102 set IP type to PPPoE 111 prompt gateway ip HEI prompt phone number Below setting need reboot to take effect 103 change to bridge mode 104 change to router mode 50192 168 1 117 set WAN port IP address 51192 168 1 1 set default gateway IP 52202 112 10 37 set dns server 53255 255 255 0 set netmask use 255 255 255 0 if no be set OverTek 23 32 www overtek com br IEN OVERIEK OT ATA200SP VoIP ATA User Manual 4 Telnet Console 4 1 Introduce 4 1 1 Basic structure User may use telnet command to access and manage gateway OT ATA200SP adopts tree structure for telnet Every node contains its sub nodes or local command User can type help or whenever to see sub nodes and all local command under current node Besides local command there are some global commands can be used in each node 4 1 2 Basic command Logout exit telnet mode Write save current settings Type sub nodes name in current node to switch to sub node Type or exit in current node to return to parent node Type help or can see all sub nodes and all local command under current node every help item
23. me handset to place PSTN and VolP calls First you need to set up the Lifeline with the accessory send with the OT ATA200SP connect this accessory to OT ATA200SP s FXS port and then connect the handset to the accessory s phone port connect the landline to the accessory s line port You can receive PSNT and VoIP calls simply with configuration To place the PSTN call you need to set up as follow Add a new dial rule in the Dial Peer setting set the phone number to T and choose the Lifeline as the Call mode Add new Digital map item in the Advance _ Digital Map set Prefix Number to and and the length to 1 Then when you want to place a PSTN calls you can first press to switch to the PSTN line and then place your call as you normal do Why the settings vanish after reboot Please go to Config Manage_Save Config to save your setting always How to use the dial rule OT ATA200SP provide flexible dial rule with different dial rule configure user can easily implement the following function Replace delete or add prefix of the dial number Make direct IP to IP call Place the call to different SIP server according the prefix Make PSTN calls use Lifeline function Please refer How can use the Lifeline function of OT ATA200SP You can click Add to add a new dial rule Below is the detail setting of the dial rule Phone Number The Number suit for this dial rule cam be set as full match or
24. n 2 8 3 Auto update OT ATA200SP gateway support FTP and TFTP auto update The gateway will auto obtain the configure file from your update server if configured To obtain the original configure file you can use the FTP TFTP back up as describe above Configure file using module structure user may remain the concerned modules and remove other modules Put the configure file in the root directory of update serve when finish editing MAINTENANCE AUTO PROVISION IST WS MEU o Wis Po eeet ims TE Auto Update Setting Update Mode APPLY Current Version the system will display the current version number Server Address FTP TFTP server address Username FTP server user name Password FTP server password Config File Name The name of configuration file Config Encrypt Key The encrypt key of confirmation file Protocol Type The protocol type that used for upgrading Update Interval Time The interval time that the terminals search for new configuration file Update Mode auto provision mode Disable not auto update Update after reboot auto update after reboot Update at time interval auto update after a certain time Configure file version was in the lt lt VOIP CONFIG FILE gt gt and lt GLOBLE CONFIG MODULE gt ConfFile Version For instance Gateway original version is lt lt VOIP CONFIG FILE gt gt Version 1 0000 lt GLOBLE CONFIG MODULE gt ConfFile Version 6 User may edit the configure file version to lt lt V
25. oup ID of UDP VPN Server Area Code the are code of VPN server L2TP VPN Server Addr register to the address of VPN server VPN User Name L2TP VPN username VPN Password L2TP VPN password VPN Mode L2TP Enable VPN UDPTunnel use the UDP to visit VPN L2TP use the L2TP to visit VPN Enable VPN Enable the VPN server you must choose UDP or L2TP type in advance OverTek 18 32 www overtek com br OVERIEK OT ATA200SP VoIP ATA User Manual 2 6 Dial Peer Settings Dial Peer Option Please refer to how to use dial rule for detail 2 6 1 Config Manage Save Config save current settings Clear Config restore to default settings Notice clear config in admin mode all settings restores to factory default clear config in guest modem all settings except sip advance sip restore to factory default 2 7 Update 2 8 1 Web Update update gateway s settings or firmware Firmware file is dlf extension when configure file is cfg extension OT ATA200SP will auto select configure update or firmware update according the extension 2 8 2 FTP Update back up the configure file to FTP or TFTP server Or auto update configure file from your auto update server Back up configure file to your FTP TFTP server MAINTENANCE if WESSEN Meese UPDATE WISS rd Museen 8 8 sd Web Update OverTek 19 32 www overtek com br IEN OVERIEK OT ATA200SP VoIP ATA User Manual configure use cfg extensio
26. prefix match Full match means that if the number user dialed is completely the same as this number the call will use this dial rule Prefix match means that if prefix of the number that the user dials is the same as the prefix the call will use this dial rule to distinguish from the full match case you need to add T after the prefix number in the phone number setting Call Mode support SIP and Lifeline SIP means the call will use sip protocol Lifeline means the call will use the PSTN line Destination optional call destination can be IP or domain Default is 0 0 0 0 in this case the call will be routed to the Public SIP server If you set the destination to 255 255 255 255 then the call will be routed to the private SIP server Also you can key other address here to make direct IP calls Port optional Configure the port of the destination default is 5060 Alias optional Set up the Alias We support four Alias as below Alias need to co work with the Del Length gt add xxx add prefix to the phone number can set to reduce the dial length OverTek 27 32 www overtek com br eh OVERIEK OT ATA200SP VoIP ATA User Manual gt all xxx replace the phone number with the xxx can use as speed dial function gt del delete the first N numbers N is set in the Del Length gt Lep xxx replace the first N numbers N is set in the Del Length For Example Use wants to place a call 8610 62281493 then you can set the phone num
27. r Private service system supplier carries out the sign and speeches to encrypt default is common User can register two sip servers public sip server and private sip server these two sip servers are independent from each other and running in the same time For how to configure private sip server Please refer to sip configuration 2 5 6 Digital Map Digit map is a set of rules to determine when the user has finished dialing OT ATA200SP support below digital map Digital Map is based on some rules to judge when user end their dialing and send the number to the server OT ATA200SP support following digital map OverTek 15 32 www overtek com br IEN OVERIEK OT ATA200SP VoIP ATA User Manual End With Use as the end of dialing Fixed Length When the length of the dialing match the call will be sent Timeout Specify the timeout of the last dial digit The call will be sent after timeout Prefix User define digital map represents the range of digit can be a range such as 1 4 or use comma such as 1 3 5 or use a list such as 234 x represents any one digit between 0 9 Tn represents the last digit timeout n represents the time from 0 9 second it is necessary Tn must be the last two digit in the entry If Tn is not included in the entry we use TO as default it means system will sent the number immediately if the number matches the entry Example 1 8 xxx All number from 1000 to 89999 will be
28. static IP dynamic obtain IP and PPPoE Configure Static IP Enable Static Set OT ATA200SP s IP address in the IP Address Set net mask in the Net mask field Set router IP address in the Gateway DNS Domain Set local DNS server in the Preferred DNS and the Alternate DNS Configure to dynamic obtain IP Enable DHCP If there is DHCP server in your local network OT ATA200SP will automatically obtain WAN port network information from your DHCP server Configure PPPoE Enable PPPoE PPPoE server Enter ANY if no specified from your ITSP Enter PPPoE username and pin in the username and password OT ATA200SP will automatically obtain WAN port network information from your ITSP if PPPoE setting and the setup are correct Notice If user accesses the gateway through WAN port He should use the new IP address to access the gateway when the WAN port address was changed OverTek 9 32 www overtek com br IEN OVERIEK OT ATA200SP VoIP ATA User Manual 2 3 2 LAN Config NETWORK DOIT LAN eer EIS Ted OSCH Mem e OE LAN Set DH NA Bridge Mode Bridge Mode Enable this option to switch to bridge mode Gateway won t assign IP for its LAN port in bridge mode and its LAN and WAN port will be in the same network This setting won t take effect unless you save the config and reboot the device IP Netmask Set the IP and Netmask for the LAN DHCP Server Enable DHCP service in L
29. ult is 80 User may change this port to enhance system s security When this port is changed please use http xxx xxx xxx Xxx Xxxx to reconnect Telnet Port configure telnet transfer port default is 23 OverTek 13 32 www overtek com br eh OVERIEK OT ATA200SP VoIP ATA User Manual RTP Initial Port RTP initial port RTP Port Quantity Maximum RTP port quantity default is 200 Notice Settings in this page won t take effect unless save and reboot the device If you need to change telnet port or HTTP port please use the port greater than 1024 because ports under 1024 is system remain ports HTTP service if HTTP is set to 0 2 5 4 QoS settings NETWORK PN em cos ECG TT SES EA rch Z VLAN ID Check Enable VoIP Other VLAN differentiated Undifferentiated DiffServ Enable DiffServ Value 3 VoIP Data 802 1P Priority fo O 7 Other Data 802 1P Priority fo 0 7 VoIP Data VLAN ID 256 0 4095 Other Data VLAN ID 254 0 4095 OT ATA200SP implement QoS based on 802 1p The QoS is used to mark the network communication priority in the data link MAC sub layer OT ATA200SP will sorted the packets using the QoS and sends it to the destination 1 Voice 802 1p Priority Configure the priority of the voice packets in 802 1p protocol 2 VLAN Enable Disable Enable VLAN function 3 Voice VLAN ID configure the Voice signaling VLAN ID 4 DiffServ Enable Disable Enable Diffserv service 5 DiffServ

OT-ATA200SP+ 1 FXS + 1 PSTN SIP/IAX ATA User Manual

Contents

Download Pdf Manuals

Related Search

Related Contents