Home

OBT-58108 User Manual

image

Contents

1. Ortitel REDES INTEGRADAS OBT 58108 User Manual Copyright There is no any clear or implicit assurance in the user s manual of our company including the assurance of selling or installing for the special purpose There are rival s volumes to carry on the power to alter or revise in our company if alter and forgive me for not issuing a separate notice Can t duplicate any content of this manual by the written permission of our company Registered trademark All other trade marks appearing copyrights are reserved by other companies in this manual FCC Information This equipment has been tested and found to comply with the limits for Class digital devices pursuant to part 15 of the FCC Rules These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment This equipment generates uses and can radiate radio frequency energy and if not installed and used in accordance with the instruction manual may cause harmful interference to radio communication Operation of this equipment in residential area is likely to cause harmful interference in which case the user will be required to correct the interference at this own expense The user should not modify or change this equipment without written approval from company name Modification could void authority to use this equipment For Safety reasons people shuld not work in a situation which RF
2. 2670 A215 Bytes 226303 3620727 Wi efesas p Received Transmitted Unicas Packets E n Broadcast Packets uM l 0 Multit st Packets E 0 Total Packets E EJ Total Entes Picture14 Statistics P gina 24 de 27 This page displays both wired and wireless interface network traffic Click Refresh to update the current statistics Wired Ethernet This section displays traffic statistics for the wired Ethernet interface Wireless This section displays traffic statistics for the Wireless interface P gina 25 de 27 Glossary The abbreviation of Access Point refer in particular to the wireless access point The abbreviation of Broadband Wireless Access Point does not have the network B bridge to refer in particular to broadband P WA CS Show that there is important information that reminds you with better using the DNotice l equipment E It have potential dangerous operation will do harm to hardware of the equipment or REE make data not to lose or make equipment not to can be used normally all to show It distribute to may make wireless users can connect to the network name of AP AP SSID to use for It is different from the access point name of AP it was used for distinguishing AP that that is only available for AP IEEE 802 11 Include IEEE 802 11a b g If has not used DHCP server in the network has needed to assign a legal IP address AP IP address for AP used to land to AP through HTTP IP ad
3. OBT 58108 Security Settings ETA E Basie EET TIT WEP LAM z Fo F am Auteriticsmon Type 0 Open System Shared Key dl et br Wah Encryption Strength Hone t gt ecurnty Ep Sec y Encryplion VER Keys MAL Coominal Passphrase B Adeanced Sun Kury 1 L nk Teal ETT ETT Key 2 E haar agerent Kin 3 Ch ange Mal e Finan Upgrade Hipy d Backup Restore Reboot Enable Wireless Client Security Sepasater EH Mo Oves E Infbema tior Apply Cancel Picture 6 Security Settings WEP Enable or Disable the Wired Equivalent Privacy for data encryption Authentication Type Specifies the Authentication type used Open System or Shared Key If Shared Key is selected you need to enable WEP and enter at least one shared key Default Open System Encryption Strength Select the desired option If enabled 64 bit 128 bit or 152 bits the keys must be entered and other wireless stations must use the same keys Note that 64 bit and 128 bit are the standard Encryption strength options 152 bit key length is a propriatary mode that will only work with other wireless devices that support this mode Default None Security Encryption WEP Keys To use the passphrase to generate the keys enter a passphrase and click the Generate Keys button You can also enter the keys directly These keys must match the other wireless stations Key 1 Key2 Key3 Key 4 Select the key to be used as the default key Data transmissions are always
4. 108 Wireless Access Point This provides an additional layer of security Choose the Turn Access Control On to enable Access Control feature Trusted Wireless Stations This lists any wireless stations you have entered If you have not entered any wireless stations this list will be empty To delete an existing entry select it and then click the Delete button Available Wireless Stations P gina 16 de 27 Select the stations from the wireless station list and click Add button to add to the Trusted Wireless Stations list Add new Station Manually Use this to add the MAC address of the wireless stations to the Trusted Wireless Stations list Advanced Setup Link Test OBT 55108 Link Tast General Basic setup AN L Remote MAC i Wyirglees WAN Local MAC oU Baz l6 FF E Security Space Bateman AP 036000 BONO m WEP RF Cable Loss 0 10 2 ln MAC Corirol E Advanced Setup Litt d AnS n Gm Ey Za PT Link Test Remote Antenna Gain 5 23 m Wireless E Man agemueni Chinos Pasear Firmware T grade Tr aa PET Hiini O R r PES Mai 0 Backi Haite Rew Trans Rate 0 Time Eli aac ai Habbo Loca Sigea E ies HRS I Rem be Sipi Lana ESTE E aa Local Signal Lerek 0 Penkis Signal Loya E i 0 Station List PERLEHT PERCENT sido Picture8 Link Test You must go to Wireless Settings page to enable Wireless Bridging and Repeating Then you can select a Remote MAC to test link Select a Remote MAC input the par
5. 22 18 FF Country Region China Fitirrei ad e Version 1 1 4 Oct 8 2004 Cus t IP Settings IP Address 182 168 0228 Siel Mask 255 253 153 0 Detaull Gateway 0000 DHCP Client Disable Cum eni Wi liaa Settings Access Point Mods Bridge Multi Fa nf Wireless Network Haare SSD ZCOM Chee Er equienicy 1490715 745Hz WIP Disable Picture2 General General page displays current settings and statistics for the Wireless Outdoor Bridge As this information 1s read only any changes must be made on other pages Access Point Information General information Current IP Settings These are the current settings for IP address Subnet Mask Default Gateway and DHCP settings Current Wireless Settings These are the current settings for the Wireless Outdoor Bridge Basic Settings LAN P gina 10 de 27 OBT 58108 AFEFE recarrcsdcat r Access Pot Miiri AC IE elis DHCP Chent O Enabas E Disable IP Address 192 ical 220 IP amp ubnat Mask 255 255 235 0 Link Tae Diefauift Gateway B io lo lo W rBleEg fal t G Ti A P Nager Apply Cancel CHange Patten Friera pgn Backup Restore Reboot E Infoematiin Salon List AMECA Picture3 IP Settings The default values are suitable for most users and situations Access Point Name This unique name is Wireless Outdoor Bridge NetBIOS name The default Name is located on the bottom label of OBT 58108 You may modify the default name with a un
6. Backup Restore p Rehor Bun pari Picture 4 Wireless Settings Enter a 32 character maximum service set ID in this field the characters are case sensitive When in infrastructure mode this field defines the service set ID SSID The SSID assigned to the wireless node is required to match the Wireless Outdoor Bridge SSID in order for the wireless node to communicate with the Wireless Outdoor Bridge Default ZCOM Broadcast Wireless Network Name SSID If set to Yes The Wireless Outdoor Bridge will broadcast its SSID allowing Wireless Stations which have a null blank SSID to adopt the correct SSID If set to No the SSID is not broadcast Default Yes Country Region Select your country or region from the drop down list This field displays the region of operation for which the wireless interface is intended It may not be legal to operate the Wireless Outdoor Bridge in a country region other than the country region shown here If your country or region is not listed please check with your local government agency or check our website for more information on which channels to use Default China P gina 12 de 27 Channel Frequency Select the channel you wish to use on your wireless LAN Default 149 Note If you experience interference shown by lost connections and or slow data transfers you may need to experiment with different channels to see which is the best Data Rate Show the wireless network and tran
7. ameters of Space Between AP RF Cable Loss Local Antenna Gain and Remote Antenna Gain click Apply button Then click Start Notice In the point to point mode The value of Space Between AP should close to the real distance The distance must be input View the intensity of signal and adjust the positions and angles of the antenna according to the intensity of signal Adjust the antenna from side to side from head to foot observe the number value of dBm at the same time when the number value of dBm is the greatest the antenna is in the best positions and angles promptly Notice Two kinds of expression methods that equipment has offered the intensity of signal to compare with intensity of signal the intensity of signal than only generally consults the meaning is subject to number value of the intensity of signal dBm while adjusting the aerial Pagina 17 de 27 In point to Multipoint mode must test every chain Notice In the point to Multipoint mode central point input from for central point distance to get most far point the far point is before reaching the real distance of central points for each point Wireless Brinda CAL Advanced Wireless Settings General B Basi setup LAN gt Wireless WAN O Wielas Point to Poit Paige Access Point Made Bridge Mode w E Security Remote HAC Address WU E E E Wineless Point Lo Mili Post Bridge MAC Contra Remo MAC Address 1 E Ad
8. atures and Benefits e Representative Application e System Requirement The next generation Broadband Wireless Access device OBT 58108 802 11a Wireless Outdoor Bridge is specially designed for Point to Point and Point to Multipoint applications offering campus wide connections between buildings at a speed of up to 54Mbps OBT 58108 I build in 23dBi gain antenna OBT 58108 E with N Female connector for external antenna The new features and benefits are support POE power over Ethernet support test link use this utility you can place the antenna in the best place Fully compliant with IEEES802 11a standard The Wireless Outdoor Bridge provides powerful features Appearance of Product Features and Benefits Creates a Point to Point connection linking two LANs using two Wireless Outdoor Bridge Creates a Point to Multipoint system using three or more Wireless Outdoor Bridge Features 54Mbps data rate by incorporating OFDM technology Fully IEEE 802 11a compatible Operating in the unlicensed 5 8GHz ISM band MAC address control Easy to install and friendly to user just plug and play Provides Web based configuration utility Tight design with lightweight compact size and low power consumption Support power over Ethernet Waterproof and can place into outdoor directly Test link utility help you place your antenna at the best place P gina 4 de 27 Representative Application The Wireless Outdoor Bridge offer a fast relia
9. ble cost effective solution for wireless client access to the network in applications like these Remote Access to Corporate Network Information E mail file transfer and terminal emulation Difficult to Wire Environments Historical or old buildings asbestos installations and open area where wiring is difficult to deploy 4 Frequently Changing Environments Retailers Manufacturers and those who frequently rearrange the workplace and change location 4 Temporary LANs for Special Projects or Peak Time Trade shows exhibitions and construction sites where a temporary network will be practical Retailers airline and shipping companies need additional workstations during peak period Auditors requiring workgroups at customer sites Access to Database for Mobile Workers Doctors nurses retailers accessing their database while being mobile in the hospital retail store or office campus 4 SOHO Small Office and Home Office Users SOHO users need easy and quick installation of a small computer network 4 High Security Connection The secure wireless network can be installed quickly and provide flexibility System Requirement Installation of the Wireless Outdoor Bridge requires 10Base T Ethernet interface or the exchanger or concentrator of 100Base TX fast Ethernet interface A dispose and have network bridge same network sections of PC the same IP of address and install the following WEB browsers Micr
10. dge s current settings and restore the factory default settings Once you have the Wireless Outdoor Bridge working properly you should back up the information to have it available if something goes wrong When you backup the settings they are saved as a file on your computer You can restore the Wireless Outdoor Bridge s settings from this file Backup a copy of the current settings to a file To create a backup file of the current settings 1 Click Backup 2 If you don t have your browser set up to save downloaded files automatically locate where you want to save the file rename it if you like and click Backup 3 If you have your browser set up to save downloaded files automatically the file is saved to the your browser s download location on the hard disk Retrieve backed up settings from a file To restore settings from a backup file 1 Click Browse Pagina 22 de 27 2 Locate and select the previously saved backup file by default wg302 cfg 3 Click Retrieve A window appears letting you know that the Wireless Outdoor Bridge has been successfully restored to previous settings The Wireless Outdoor Bridge will restart This will take about one minute Notice Do not try to go online turn off the Wireless Outdoor Bridge shutdown the computer or do anything else to the Wireless Outdoor Bridge until it finishes restarting When the Test light turns off wait a few more seconds before doing anything with the Wireless Outdo
11. dress of acquiescence is http 192 168 0 228 HTTP Used for landing admin password or password of user name of acquiescence to AP User s name password from WEB page Which kind of encryption ways are not needed to decide to set up for AP with you Encrypt setting according to the environment When AP is chosen as mode of bridge graft this function can be used for etermining the connection state n purpose addre This function is only valid under AP mode invalid under the mode of bridge graft MAC control Used in MAC address to filter Wireless STA when should only tabulate when MAC controls the function to open A could be connected to AP A ST Sm MAC address connected to STA of AP all show 1n should be tabulated when can add to and can believe wireless STA is tabulated according to the nee P gina 26 de 27 B Z REDES INTEGRADAS Copyright Orbitel Telecomunicacoes e Inform tica Ltda 2005 SIG Quadra 03 Bloco B No 99 Sala 101 Brasilia DF Brasil 70610 400 Tel 55 61 341 4100 Fax 55 61 341 4101 Email comercial orbitel com br Site www orbitel com br P gina 27 de 27
12. encrypted using the default key The other keys can only be used to decrypt received data Wireless Client Security Separator The associated wireless clients will not be able to communicate with each other if this feature is enabled Default Disable Pagina 15 de 27 Security Encryption WEP Keys To use the passphrase to generate the keys enter a passphrase and click the Generate Keys button You can also enter the keys directly These keys must match the other wireless stations Key 1 Key2 Key3 Key4 Select the key to be used as the default key Data transmissions are always encrypted using the default key The other keys can only be used to decrypt received data Wireless Client Security Separator The associated wireless clients will not be able to communicate with each other if this feature 1s enabled Default Disable MAC Control OBT 58108 sai Access Control List TA E Basic Sat up Orbitel Errada C Turn Access Control On Trusred Wireless Simons 5 Security MAC Addis WEP Delete AA Corral 5 E Advanced Setup Blase Wis elas e Stale Link Test lation ID MAC Address Wireless i E tar agement add Ch ame B rri C Firrrra ni Lipik Adl LE Satin Iani Backup Restore MAC Address Add E nioematior Salen List Statistics Cancel Picture7 Access Control List The optional Access Control window lets you block the network access privilege of the specified stations through the OBT 58
13. exposure limits a re exceeded To prevent the situation happening people who work with the antenna should be aware of the following rules Install the antenna in a location where a distance of 20cm from the antenna may be maintained While installing the antenna in the location please do not turn on the power of wireless equipment While the device 1s working please do not contact the antenna About the manual The purpose to use this manual is for install the Wireless Outdoor Bridge This manual is including disposing course and method and helping the customer to solve the unpredictable problem P gina 2 de 27 Table of Contents COPLYRICH Ls on 2 REGISTERED TRADEVMAR RKeocoiniraiinna iaa 2 ECC INFORMATION Sii 2 ABOUF THE MANUAL iia 2 L OBT SSIOS INTRODUCTION cos t te E Yee ve ee bou exe rev eve ro eus 4 APPEARANCEOPPRODUCOT RR RENE 4 FEATURES AND BENEFITS Sastre latido 4 REPRESENTATIVE APPLICATION a dec 5 SYSTEM REQUIRENMEN TA a or a a a a 5 2 HARDWARE INSTALLATION ii ia 6 EPODUC SAA A A E rea e dose nee 7 HARDWARE INSTALLATION sita idiotas T INTAR Dronene ltd ces 9 S CONFIGURINGOBT SS Osuna sa 9 USING THE WEB MANAGEMENT 00 ds 10 SS SERT MEN IE da aa NOR A ER 11 BASIC SEEDING 0 idas 11 SE CURI retis c ud RI MM EEUU I E lc 15 ADVANCED UP e e ed da ld dol 17 MANAGE NENE ab 19 INFORMATION rl stories lali codicia 24 AG OSSAR Vit A AA A A A 26 P gina 3 de 27 1 OBT 58108 Introduction e Appearance of Product e Fe
14. ique name up to 15 characters long Default ZCOMxxxxxx where xxxxxx represents the last 6 digits of the MAC address IP Settings By default The Wireless Outdoor Bridge is set to be a DHCP Dynamic Host Configuration Protocol client disabled You may enable the DHCP client to let the Wireless Outdoor Bridge getting its TCP IP configuration from the DHCP server on your network DHCP Client The Wireless Outdoor Bridge will get the IP address subnet mask and the default gateway settings automatically from the DHCP server if DHCP is enabled IP Address Type the IP address of the Wireless Outdoor Bridge Default 192 168 0 228 IP Subnet Mask The Wireless Outdoor Bridge will automatically calculate the subnet mask based on the IP address that you assign Otherwise you can use 255 255 255 0 as the subnet mask Default Gateway Address The Wireless Outdoor Bridge uses this IP address as default router gateway for any traffic beyond the local network P gina 11 de 27 Wireless OBT 58108 E ET TERES E Sas Sal i LAM rales WWAN Orhitel FEAT eed CAL Wireless Network Marne 5510 Ervadeasi Wireless Mebeork Hare 55104 Country i Region ELLE yer COND China m cecunty diris Channel y F nad Cy i48 5 745 Hz w a 3 BEAT fn ntl Cita Hate Bast vt Bg Advanced Setup Output Power Pull jm L nk Teal Super AG OFF Ld Muralega B TRI Ir HL IE E 1 Change Passei Fira pgn n j a ue
15. nt Make the crystal head not cross over cable white orange orange white green blue white blue green white brown brown Plug water joint into the Wireless Outdoor Bridge P gina 7 de 27 Initialize Have initial value network of bridge whether which is short of province parameter set up is it install after finishing is it can make working to it to supply powering in hardware to need only o Warning Please don t insert and pull out the network cable with electricity P gina 8 de 27 3 Configuring OBT 58108 e Using the Web Management e General e Basic Setup e Security e Advanced Setup e Management e Information Using the Web Management OBT 58108 User Name aman Password HAGA Language English Picturel Enter The built in Web Management provides you with a user friendly graphical user interface to manage the Wireless Outdoor Bridge The Wireless Outdoor Bridge allows you via web browser MS Internet Explorer 6 0 to monitor and configuration Run Web Explorer Enter default IP Address 192 168 0 228 of the Wireless Outdoor Bridge in the Address field Enter default User Name admin and default Password password Click Login The main page will show up The Wireless Outdoor Bridge allows configuration only via Web Pagina 9 de 27 General OBT 58108 A Orhi tel CCA AFEFE pifel General Accra Pos Inf orgmciiesd Access Pola Nase ICcOMI2 080 MAC Address 00 50 3
16. or Bridge 4 Close the message window Restore factory default settings To erase the current settings and reset the Wireless Outdoor Bridge to the original factory default settings Click Restore Notice Do not try to go online turn off the Wireless Outdoor Bridge shutdown the computer or do anything else to the Wireless Outdoor Bridge until the Wireless Outdoor Bridge finishes restarting When the Test light turns off walt a few more seconds before doing anything with the Wireless Outdoor Bridge Reboot You may select Yes on Reboot the Wireless Outdoor Bridge and then click on APPLY button to reboot the Wireless Outdoor Bridge OBT 58108 Reboot AP General Reboot access post Oves No Apply Cancel Firmware Upgrade Backisrhe Tu Heke AT ER Trid A intimation lt tuaion List a im ell MET I j acta na P gina 23 de 27 Information Station List IS o e Orbit el Bate E A fo Rag Wireless Station List METIO L MAC Address T Status Picture13 Wireless Station List This page shows the Station ID and MAC Media Access Control address for each Wireless Outdoor Bridge or client node associated with the Wireless Outdoor Bridge Statistics OBT 58108 e Orhitel A EN AFR fe rpg ed eae Statistics Wii cal Filii met Packets
17. osoft Internet Explorer 6 and hit Service Pack 1 or the newer patch and wrapped up Q323308 PC is used for disposing the one without the network bridge through HTTP port Notice Wouldn t support Netscape browser s operation of AP at present please use More than Microsoft IE 6 0 One 48V 750mA power module in order to power supply of the Wireless Outdoor Bridge A RJ 45 connector supports the transfer rate of 10 100bps data P gina 5 de 27 2 Hardware Installation e Product Kit e Hardware Installation e Initialize Product Kit Before installation make sure that you the following items The Wireless Outdoor Bridge OBT 58108 1 DC Injector 1 Product CD 1 Power Adapter 1 Fixed settings 1 If any of the above items are not included or damaged please contact your local dealer for support Hardware Installation Take the following steps to set up the Wireless Outdoor Bridge Hardware equipment 4 Fixation First you should fix the Wireless Outdoor Bridge the following figure show it P gina 6 de 27 4 Connect the Ethernet Cable The Wireless Outdoor Bridge supports 10 100M Ethernet connection Attach UTP Ethernet cable to the RJ 45 connector on the Wireless Outdoor Bridge Then connect the other end of the RJ 45 cable to a hub or a station Please note that use the crossover cable when you desire to connect the Wireless Outdoor Bridge to a PC Put UTP cable through the water joi
18. se Multiple Access with Collision Detection mechanism or the CSMA CA mechanism for packet transmission With the CSMA CD transmission mechanism the transmitting station sends out the actual packet as soon as it has waited for the silence period With the CSMA CA transmission mechanism the transmitting station sends out an RTS packet to the receiving station and waits for the receiving station to send back a CTS Clear to Send packet before sending the actual packet data Default 2346 Fragmentation Threshold This is the maximum packet size used for fragmentation Packets larger than the size programmed in this field will be fragmented The Fragment Threshold value mst be larger than the RTS Threshold value Default 2346 Beacon Interval The Beacon Interval Specifies the interval time between 20ms and 1000ms for each beacon transmission Default 100 DTIM The Delivery Traffic Indication Message Specifies the data beacon rate between 1 and 255 Default 1 Preamble Type A long transmit preamble may provide a more reliable connection or slightly longer range A auto transmit preamble gives better performance Default Auto P gina 19 de 27 Management Change Password OBT 58108 3 Orbitel o Help Exit FE FATZ E ede Change Password apriieral E Basi Sat LAN Current Password Wii e 54 Nina Pinar Ai Rape al Ne Pack ari E Secunty MT P MEI Resor Catal Password O vas 8 N Apply Cancel Bg Ad
19. smit the data rate The data rate that may be supported is as follows 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps and Best Default Best Output power Show that there is not output power of the network bridge Possible output power selects as follows Full 5096 2596 12 596 and minimum Output power can be adjusted according to the state of the local network Default Full Super AG Select the Super AG you wish to use on your wireless LAN Default off WAN OBT 58108 lt 9 Orhitel AFEFE BETIZAdCAa Route Settings Rau C Enable CE Diabla WAN port e Wired O Wireless IP Address IF Subnet Mask LABTAUR C3 ater ary erly Cancel os B fiu EA i e alin Li MENE Picture5 WAN Setting P gina 13 de 27 Choose to open the route function You can set up IP address subnet mask value that is closed of acquiescence network according to your need Notice When you choose the route function If choose WAN port to be that then IP address established 1n LAN 1s the address of the wireless end in the wired end If the WAN port chosen 1s the wireless end on the contrary then IP address established in LAN end is the address of the wired end o Notice The IP Address of LAN and WAN cant be in the same net section Notice After establishing IP address of WAN need to click the button Reboot and enabling setting up and coming into force P gina 14 de 27 Security WEP
20. ss Outdoor Bridge and causes the Wireless Outdoor Bridge to restart Notice Do not try to go online turn off the Wireless Outdoor Bridge shutdown the computer or do anything else to the Wireless Outdoor Bridge until the Wireless Outdoor Bridge finishes restarting When the Test light turns off wait a few more seconds before doing anything 6 Click General and check the Firmware Version to verify that the Wireless Outdoor Bridge now has the new software installed P gina 21 de 27 Warning In some cases such as a major upgrade you may need to erase the configuration and manually reconfigure the Wireless Outdoor Bridge after upgrading 1t Refer to the Release Notes included with the software to find out 1f you need to reconfigure the Wireless Outdoor Bridge Backup Restore OBT 58108 Orhitel rRerPFe ed ODE Backup Restore Settings EA a ass Sotup Backup a copy ofthe current settings to a file Lap LAN backup o 54 war O LLLLZL LZLL1LLLLLLLLL L UO BLLC CLLLELVLLLLLLLLLLALULALLLeLLL CLCL LLLLLLNCL LZLL LULOUL LILIGLLLL LLdDIpKUDIEZLL GIHLLDLLLULL KAGL LLL hh ae Retrieve backed up Settings proe a fie Secunty nen Fik MAL Cond nel Ret rieve B Advanced 5Setun Link Test Rested e factory defaulr sani D TRI Ir HD Change Possuo Firmware Upgrade Backup Restore Bn nar Lit E IEEE Picture11 Backup Restore Settings This page allows you to back up the Wireless Outdoor Bri
21. vanced Setup Picturel0 Change password You can use the Change Password page to change the Wireless Outdoor Bridge administrator s password for accessing the Settings pages To change the password 1 Type the old password 2 Type a new password and type it again in the Repeat new password box to confirm it EM Notice Be sure to write 1t down in a secure location 3 Click Apply to have the password changed or click Cancel to keep the current password The default password for the Wireless Bridge 1s password P gina 20 de 27 Firmware Upgrade OBT 58108 Browse do locate fe firmware file Upload m hange I at ane Errar Upgrade Backup Restore Reboot amp inipematiam Salon List SIATCE Picturell Upgrade Firmware You can install a new version of the Wireless Outdoor Bridge s software using the Firmware Upgrade page Warning Once you click Upload do NOT interrupt the process of sending the software to the Wireless Outdoor Bridge and restarting the Wireless Outdoor Bridge To upgrade the Wireless Outdoor Bridge software 1 Download the new software 2 If not done automatically uncompress the downloaded file If included read the Release Notes before continuing 3 Click Browse 4 Locate and select the file you just downloaded and uncompressed from your local hard disk 5 Click Upload to send the software to the Wireless Outdoor Bridge This loads the new software into the Wirele
22. vanced Setup Mbps Link Tgi Rania MAC Address Y Mbn Wireless A Remota MAC Address Mbps E Mar agemuri Change Password Romote MAC Addio 4 Mbps Firmware Upgrade Romeo MAC Addins 5 Mbps Backin estii Fi bonl Remote MAC Address Mbps ada Remote MAC Address T Mbps i n List ET m I et uptime Wir etes s LAN Parameters Picture9 Advanced Wireless Settings According to your environment choose the corresponding work pattern Point to point In this mode equipment that is wireless outdoor bridge communication with another bridge mode only Point to Multipoint Choose only when this equipment is for the main fact in the wireless device group of the mode of the bridge There is not a network bridge and must be established as the point to point mode of bridge graft in mode of other bridges use MAC address of this equipment Have network bridge send all flow main fact have network bridge but not direct communication each other while being other EN Notice You must input MAC Address of the Remote Wireless Outdoor Bridge Notice In the point to Multipoint mode input the Remote MAC Address to first line Remote MAC address 1 wait for all far point is it join after testing to make input all Remote MAC Address to the field P gina 18 de 27 Parameter of the wireless LAN RTS Threshold Request to Send Threshold The packet size that is used to determine if it should use the CSMA CD Carrier Sen

Download Pdf Manuals

image

Related Search

Related Contents

SC-HTX700/500  Samsung Samsung  Philips SPC1035NC User's Manual  Owner`s and Safety Manual Manuel d`emploi et de sécurité  Samsung SP-L301 Käyttöopas  

Copyright © All rights reserved.
Failed to retrieve file