User Guide
Contents
1. 5 Valet Mode with the Valet Switch 5 Ignition Valet 5 Start Attempts Indicator Valet Mode 6 Home ValetTM Mode 6 Remote Valet Mode 6 Panic Mode 6 Quick LockoutTM 7 Cold Weather Mode 7 Temporary chirp delete 7 Advanced Features Installation programmable Options 7 Remote Door Locks 7 Priority Door Access 8 Active or Passive Arming 8 The Starter Kill and the Anti grind Feature 8 Shock Sense Warn away Sense 8 Disarmed Notification 8 Siren Chirps or Horn Honks 8 Car Finder 9 Siren or Horn Chirp Timing 9 Safe Start 9 Home Valet TM 9 Ignition controlled Door Locks 9 Ignition Re lock 9 Secure Lock 9 Turbo Mode 9 Remote Trunk Release 9 Engine Run Time 9 Multi car Operation 9 Missing a2. 8X Adjust minutes countdown 9X Melody selection for the countdown 10X Activate ON Deactivate OFF countdown a Press the button to increase the value or to activate or deactivate a function or to toggle through the melodies b Press the to decrease the value or to activate or deactivate a function or to toggle through the melodies c To save modifications do not touch any buttons for approx 5 to 10 seconds There will be a beep and the display will return to the time Cold Weather Mode FUNCTION BUTTON PRESSED ICON BUZZER INSTRUCTIONS DESCRIPTION TO ENTER COLD WEATHER MODE BEEP Press and hold for 3 seconds TO EXIT COLD WEATHER MODE None BEEP Press and hold for 3 seconds Home ValetTM FUNCTION BY PRESSING ICON BUZZER INSTRUCTIONS DESCRIPTION TO ENTER HOME VALET MODE Step 1 or Step 2 simultaneously within 5 seconds 1 BEEP Press or within 5 seconds press The icon will be displayed and there will be 1 beep TO EXIT HOME VALET MODE NONE NONE NONE Insert the key in the ignition switch and turn it to the IGNITION ON RUN position The icon will disappear after pressing the LOCK or ULOCK button Countdown Timer FUNCTION BY PRESSING ICON BUZZER INSTRUCTIONS DESCRIPTION COUNTDOWN TIMER ADJUST MODE HOUR 6 times COUNTDOWN TIMER ADJUST MODE MIN 7 times COUNTDOWN TIM
3. Siren Chirps or Horn Honks The siren will chirp to confirm basic operations on the System By default upon locking the doors the siren will give one chirp if no protection zone is active If a zone is active as the doors are being locked the siren will give three chirps When the doors are being unlocked the siren will give two chirps if no intrusion was detected If an intrusion was detected as the doors are being unlocked the siren will give four chirps The system can alternatively be set to Warning Mode no chirp during lock unlock unless a zone is active when locking in which case there will be 3 chirp upon locking or unless the alarm was triggered in which case there will be 4 chirps when unlocking Open Zone Notification Mode 3 warning chirps if a door is left open 10 sec after arming No Chirp the siren will not chirp under any circumstance User Guide P 9 Car Finder When enabled the Car Finder option will help you locate your vehicle by generating a pulsating signal through the horn or the siren To hear the signal press the LOCK and UNLOCK buttons simultaneously This will cause a pulsating signal lasting for the time you keep the buttons pressed Siren or Horn Chirp Timing The duration of the chirps can be adjusted at installation from 5 to 200 ms Safe Start If this feature is enabled the user must press the START STOP button 2 times within 3 seconds to remote start the vehicle This
4. To put the system i n t o valet mode Insert the ignition key into the ignition switch within 10 seconds turn the key 5 times successively into the IGNITION ON RUN and OFF positions The parking lights will flash three times to indicate that the vehicle is now in valet mode and the L E D will turn itself on To take the system o u t o f Valet Mode Insert the ignition key into the ignition switch within 10 seconds turn the key 5 times successively into the IGNITION ON RUN and OFF positions The parking lights will flash twice to indicate that the vehicle is now in valet mode and the L E D will turn itself off Note With the remote valet activated the remote starter and alarm functions will be disabled Start Attempts Indicator Valet Mode This reveals start attempts made while the vehicle was in valet mode The parking lights will Come ON go OUT then Flash twice Home ValetTM Mode If configured at installation this feature will remotely set the vehicle to a no remote start mode if the vehicle is parked indoors there is no danger of it starting accidentally by remote control Note Once the Home Valet Mode is activated the vehicle will not start by remote To take the system i n t o home valet mode Press the LOCK or UNLOCK button Within 5 seconds press the LOCK and START STOP button simultaneously The transmitter will beep once and the home valet icon will start flash
5. Start or a Stop Confirmation 10 Multi Level Features default state 10 Accessing the Multi Level Features and Other Transmitter Functions 11 L E D Intrusion Codes 12 Troubleshooting Poor Transmitting Range 12 Using the Remote Control 12 LCD Transmitter Operation First Car Control 13 Basic Vehicle Operation 13 Transmitter Mode Selection 13 Time or Alarm Clock Adjustments 13 Cold Weather Mode 14 Home ValetTM 14 Countdown Timer 14 Safe Start Mode 14 Parking Countdown 15 Runtime Options once the car has been remote started 15 LCD Transmitter Operation Second Car Control 15 Basic Vehicle Operation 15 Start and Stop While in Safe Start Mode 15 Diagnostics Chirps Table 16 Diagnostics Parking Light Flash Table 17 Introduction This system is a state of the art remote car starter and alarm combo system the system is packed with advanced features such as priority access to the driver s door and car finder commodity features last armed state me
6. is so configured 2 The icon will appear the parking lights will flash twice and the L E D will go out to confirm that the doors have been unlocked and that the starter kill if installed and the alarm are disarmed In passive mode the system will rearm automatically 30 seconds after unlocking unless the key is meanwhile inserted in the ignition switch see description of passive mode later in this guide To arm the alarm and starter kill if installed and lock the doors if installed 1 Press and hold the LOCK button for approximately 1 second You will hear one chirp if the siren or horn is so configured 2 The icon will appear the parking lights will flash once and the L E D will flash slowly to confirm that the doors have been locked and that the starter kill feature if installed and the alarm are armed Idle Mode Convenience feature Idle mode allows you to keep the engine running and the doors locked while you stop for example at a convenience store or for a short delivery This feature allows you to let the remote starter take over control of the vehicle i e no key in the ignition switch while the engine is running For example if you stop for a delivery or at a conveni ence store lock your vehicle and leave it running for the length of a run cycle while you are away Idle mode can be activated through the same routine as that used for ready mode at the last step the TRUNK button is pressed instead of the o
7. sound for 60 sec User Guide P 17 Diagnostics Parking Light Flash Table Flashes Description 1 Doors locked alarm and starter kill armed End of run time TRUNK button pressed Start signal received by the system Cold weather mode cancelled Cannot start after maximum number of attempts is reached 2 Doors unlocked alarm and starter kill disarmed Run time cancelled Exit remote valet Exit ignition valet Remote start attempt cancelled by remote 3 Entering cold weather mode Entering remote valet Entering ignition valet 4 12 V where detected on the brake line and cranking was cancelled Entering tach programming mode 5 New transmitter programmed Tach programmed 6 A remote start was attempted while a tach or a vacuum signal was detected before cranking 8 Unit reset occurs when the unit is reset to the factory defaults 10 The hood switch line went to ground during cranking or run time 1 pause 2 There was an attempt to start the vehicle while the system was in valet mode 2 pause 2 There was an attempt to start the vehicle while the system was in home valet mode ON solid Cold weather mode the brake pedal is being held down ON 2 sec The hood is up and the hood switch line went to ground this is step one of the programming centre procedure ON 3 sec First p
8. the transmitter The parking lights will flash 3 times quickly and remain lit 4 Remove the key the engine will go on running 5 Exit the vehicle and close the door 6 Press and hold either a LOCK to lock the doors and shut down the engine after 60 sec b UNLOCK to unlock the doors and shut down the engine after 60 sec c START STOP to shut down the engine immediately without affecting the doors This will by pass turbo mode Valet Mode with the Valet Switch When your vehicle is in valet mode the remote starter functionalities are disabled If the vehicle needs to be serviced or if you park it indoors the valet mode will prevent the engine from being remote started accidentally To put the system i n t o valet mode 1 Turn the ignition key to the IGNITION ON RUN position 2 Within 3 seconds press the valet button The parking lights will flash three times and the L E D will turn itself on To take the system o u t o f valet mode 1 Turn the ignition key to the IGNITION ON RUN position 2 Within 3 seconds press and release the valet button The parking lights will flash twice and the L E D will turn itself off Note Once valet mode is activated the remote starter and alarm functions will be disabled Ignition Valet This feature will allow you to remotely put your system into valet mode by using the ignition key instead of the valet button as above Ignition valet can be used without a valet button installed
9. BUTTON PRESSED ICON BUZZER INSTRUCTIONS DESCRIPTION POWER SAVING MODE Melody VIBRATION MODE Vibrates twice ALARM CLOCK MODE ON OFF Melody Press once to switch the Alarm Clock ON Press twice to switch the Alarm Clock OFF Time or Alarm Clock Adjustments User Transmitter 1 Press and hold the FUNCTION button until a beep is heard The backlight will turn on the moment the FUNCTION button is pressed 2 Upon hearing the beep release the FUNCTION button is displayed 3 Press and hold the FUNCTION button once more 4 Release the FUNCTION button when a beep is heard is displayed 5 Press and hold the FUNCTION button once more until a beep is heard 6 Release the FUNCTION button is displayed 7 At that point press and hold the FUNCTION button until 2 beeps are heard The hour setting will start to flash User Guide P 13 Pressing the FUNCTION button 1X Adjust hour current time 2X Adjust minutes current time 3X Adjust hour Alarm 4X Adjust minutes Alarm 5X Melody selection for the ringing of the alarm P 14 User Guide 6X Activate ON Deactivate OFF Alarm 7X Adjust hour countdown
10. ER ENDING MELODY SELECTION 1 8 times 5 Selections 1 2 3 4 5 COUNTDOWN TIMER MODE ON OFF 9 times button press for upward adjustment or for switching the function ON button press for downward adjustment or for switching the function OFF Safe Start Mode FUNCTION BY PRESSING ICON BUZZER INSTRUCTIONS DESCRIPTION START ON SAFE START MODE X 2 Melody Press the button twice within 3 seconds Or Press for 1 second melody then press again for 1 second STOP ON SAFE START MODE None Melody Parking Countdown FUNCTION BY PRESSING ICON BUZZER INSTRUCTIONS DESCRIPTION 1 time Melody 10 MIN COUNT DOWN 2 times Melody 20 MIN COUNT DOWN 3 times Melody 30 MIN COUNT DOWN 4 times Melody 60 MIN COUNT DOWN 5 times Melody 90 MIN COUNT DOWN 6 times Melody 120 MIN COUNT DOWN FOR PARKING COUNTDOWN PRESS AND HOLD THEN PRESS 7 times Melody PARKING COUNT DOWN OFF Runtime Options once the car has been remote started FUNCTION BY PRESSING ICON GAS DIESEL 4 minutes 9 minutes ENGINE RUNTIME 15 minutes 20 minutes 25 minutes 30 minutes LCD Transmitter Operation Second Car Control Basic Vehicle Operation FUNCTION BUTTON PRESS ICON BUZZER DESCRIPTION LOCK 1 Beep Locks the doors and arms the Starter Kill if installed and the alarm UNLOCK 2 Beep Unlocks the doors and disarms the Starter Kill if installed and the ala
11. T W O W A Y M A N U A L T R A N S M I S S I O N R E M O T E S T A R T E R S Y S T E M W I T H F U L L A L A R M User Guide A note concerning the battery inside the transmitter Depending on your usage of the transmitter the battery can last anywhere between 3 to 6 months When the battery is low the transmitter will produce two beeps in a repetitive cycle At that point you should replace your battery with a new one That is why we recommend that you keep a spare battery somewhere handy such as the glove compartment WARNING Manual transmission vehicles equipped with a remote starter unit must always be parked with the gear lever in the NEUTRAL position and the emergency brakes must always e a b pplied DOC 1 00 CA Lp November 19 2004 Manufactured in Canada P 2 User Guide Table of Contents Table of Contents 2 Introduction 2 Remote Starting Your Vehicle 3 Setting Your Vehicle into Ready Mode 3 Remaining In Ready Mode 3 Remote starting 3 Vehicle Presets 3 Driving Off 4 Using the System 4 Arming and Disarming the System 4 Idle Mode 4 Turbo Mode
12. beep release the FUNCTION button will be displayed This display means that you are now in Level 1 Simply press the corresponding button to access the desired feature To access a Level 2 feature press and hold the FUNCTION button until you hear a beep within three seconds of hearing the beep release the FUNCTION button and press and release the FUNCTION button once more will be displayed This display means that you are now in Level 2 Simply press the corresponding button to access the desired feature To access a Level 3 feature press and hold the FUNCTION button until you hear a beep within three seconds of hearing the beep release the FUNCTION button and press and release the FUNCTION button two more times will be displayed This display means that you are now in Level 3 Simply press the corresponding button to access the desired feature To access the transmitter functions clock and alarm adjustments press and hold the FUNCTION button until you hear a beep within three seconds of hearing the beep release the FUNCTION button and press and release the FUNCTION button three more times There will be two quick beeps indicating that you are now in the transmitter functions adjustment menu The Hour position will be flashing Simply press and release the FUNCTION button until you reach the desired location and proceed with the adjustment by pressing the START STOP or TRUNK buttons Y
13. doors i e the doors will remain locked On models where starter kills were installed pressing the LOCK button will also activate the starter kill On alarm models pressing the LOCK button will also activate the monitoring Multi Level Features default state Basic Features press th e FUNCTION button 1X FUNCTION LOCK aux 2 FUNCTION START STOP cold weather Multi Car Operation press he F NCTION button 2X t U FUNCTION FUNCTION LOCK 2nd car lock FUNCTION FUNCTION UNLOCK 2nd car unlock FUNCTION FUNCTION START STOP 2nd car start stop Customized Features press the FUNCTION button 3X May not be compatible with some vehicles Y f h urning on t e radio open FUNCTION FUNCTION LOCK customized feature 1 our installer can add customized eatures suc as t h ing sliding doors etc FUNCTION FUNCTION FUNCTION UNLOCK customized feature 2 FUNCTION FUNCTION FUNCTION START STOP customized feature 3 By default the multi level features are programmed as follows Level 1 Basic Features Level 2 Multi car operation Level 3 Customized Features Accessing the Multi Level Features and Other Transmitter Functions To access a Level 1 feature press and hold the FUNCTION button until you hear a beep within three seconds of hearing the
14. eceived a Start or the Stop confirmation after pressing the START STOP button simply press the LOCK button Pressing the LOCK button will refresh the display and will confirm if the vehicle was started or stopped The Start Confirmation Was Not Received If after remote starting the vehicle no confirmation was received simply press the LOCK button this will refresh the display If the vehicle was started successfully the smoke icon and the hourglass icon will appear as well as the run time countdown Pressing the LOCK button will also lock all doors the lock icon will appear If the doors were already locked prior to pressing the LOCK button there will be no change in the status of the doors i e the doors will remain locked On models where starter kills were installed pressing the LOCK button will also activate the starter kill On alarm models pressing the LOCK button will also activate the monitoring The Stop Confirmation Was Not Received If after remote stopping the vehicle no confirmation was received i e the display did not return to its basic state simply press the LOCK button this will refresh the display If the engine was stopped the smoke icon and the hourglass icon will disappear and the time will be displayed Pressing the LOCK button will also lock all doors the lock icon will appear If the doors were already locked prior to pressing the LOCK button there will be no change in the status of the
15. er side of the vehicle will usually give the lowest range The range will be significantly lower in a crowded parking lot than in open space Always hold the transmitter high approximately at shoulder height Holding the transmitter against your chin will also increase your range your head acts as an antenna The operating range will be somewhat lower on vehicles equipped with an aftermarket or factory alarm Using the Remote Control P 12 User Guide The transmitter offers several command confirmation and timer features This section explains some of the key functions available on the remote control Next section gives a summary of the button combinations used to access the functions Note If you wish to exit a function while still in the process of accessing it simply stop and wait for at least 10 seconds the transmitter will return to its normal state LCD Transmitter Operation First Car Control Basic Vehicle Operation FUNCTION BUTTON PRESSED ICON BUZZER INSTRUCTIONS DESCRIPTION LOCK 1 Beep Locks the doors and arms the Starter Kill if installed and the alarm UNLOCK 2 Beep Unlocks the doors and disarms the Starter Kill if installed and the alarm TRUNK or AUX 3 1 Beep Trunk output START see Runtime Options below Melody Starts the engine STOP None Melody Stops the engine Light ON ON for 10 seconds Press the button once Transmitter Mode Selection FUNCTION
16. ing The icon will flash until the vehicle exits home valet mode To take the system o u t o f home valet mode Turn the ignition key to the IGNITION ON RUN position The system will warn you if someone attempts to start your vehicle while it stands in Home Valet Mode The parking lights will Go ON then OFF then Flash twice pause then Flash twice again Remote Valet Mode This feature will allow you to remotely put your system into valet mode by using the transmitter instead of the valet button as above Getting i n t o valet mode Hold the UNLOCK and START STOP buttons simultaneously for 3 seconds The parking lights will flash 3 times The transmitter will beep once and will display the icon the LED will remain on solid Getting o u t of valet mode Hold the UNLOCK and START STOP buttons simultaneously for 3 seconds The parking lights will flash 2 times The transmitter will beep once and the icon will disappear after pressing the LOCK or UNLOCK button and the LED will turn off Note With the remote valet activated the remote starter function will be disabled Panic Mode In an emergency situation you can activate panic mode using the LOCK or UNLOCK button This will shut down the engine unlock the doors with the UNLOCK button or lock the doors with the LOCK button disarm the starter kill and activate the activate the siren for 1 minute Note See the descrip
17. lowing actions Open the hood Start the engine by remote Turn the ignition key to the IGNITION ON RUN position Press the brake pedal Press and release the FUNCTION button and then press the START STOP button for 3 seconds the parking lights will flash once When the system exits cold weather mode the icon will disappear after pressing the LOCK or ULOCK buttons Temporary chirp delete To temporarily disable the chirp confirmations of the siren upon arming and disarming e g in a quiet neighbourhood 1 Press the TRUNK button 2 Within 3 seconds press the LOCK or UNLOCK button to arm or disarm without any chirps Advanced Features Installation programmable Options The system was designed with flexibility and OEM integration in mind With its programmable options this unit can single handedly control nearly any electrical system in your vehicle Caution The programming of your system should be left to a professional Changing any one of the settings may affect the operation of your system The installation programmable options are as follows Remote Door Locks Priority Door Access Passive or Active Arming Starter Kill Anti grind feature Shock Sense and Warn away Disarmed Notification Siren Horn Chirps Car Finder Siren Horn Chirp Timing Safe Start Ignition controlled Door Locks Ignition Re lock Secure Lock Turbo Mode Remote T
18. mory in case of power failure which ensures that the vehicle remains protected after a power failure recovery and the safe start children safety feature With many an advanced function this product will satisfy any one your expectations from high end commodity and security systems without neglecting any standard feature commonly offered by entry level starters User Guide P 3 Remote Starting Your Vehicle Setting Your Vehicle into Ready Mode This product is designed for vehicles with a manual transmission only In order to start the vehicle by remote the unit must first be set to ready mode If the unit is not set to ready mode it cannot remote start the vehicle Once the system is set to ready mode the vehicle can be remote started and stopped at wish The system will exit ready mode if a door or the hood is opened if the brake pedal is pressed if the parking brake is disengaged or if the ignition key is turned to the IGNITION ON RUN position To set the system to ready mode 1 Ensure that all the doors are closed and that the shifter is in the neutral position 2 With the engine already running apply the parking brake and release the brake pedal Make sure to release the brake pedal 3 Within 20 sec press LOCK or UNLOCK The parking lights will flash 3 times quickly and remain lit 4 Remove the key the engine will go on running 5 Exit the vehicle and close the door 6 Press and hold either a LOCK to l
19. ock the doors and shut down the engine b UNLOCK to unlock the doors and shut down the engine c START STOP to shut down the engine without affecting the doors Remaining In Ready Mode Once the vehicle is in ready mode you can start and stop the vehicle at wish However should any of the following occur the vehicle will exit ready mode thus eliminating the remote start option until ready mode is restored Door opened Hood opened Brake pedal pressed Parking brake disengaged Ignition key turned to the IGNITION ON RUN position Should any of the above occur ready mode will be cancelled Note The unit will notify the user that it has exited ready mode by giving 3 slow flashes parking lights Remote starting Press the START STOP button for approx 1 second The parking lights will come ON and the remote control will play a melody to inform you that the system has received your signal Approximately 5 seconds later the engine will start the parking lights will remain on during the pre programmed run time of the engine The remote control will play a second melody to confirm that the engine has started If the vehicle does not start at the first attempt the system will shut down W A R N I N G It may require as much as 10 seconds before receiving the second confirmation signal therefore pressing any buttons before receiving that confirmation will abort the confirmation process Vehicle Pre
20. our installer can customize the system as to personalize these multi level features in an order that best suits you Your options are Option 1 Level 1 requires pressing the FUNCTION button 1X Multi car operation Level 2 requires pressing the FUNCTION button 2X Basic features Level 3 requires pressing the FUNCTION button 3X Customized features Option 2 Level 1 requires pressing the FUNCTION button 1X Basic features Level 2 requires pressing the FUNCTION button 2X Multi car operation Level 3 requires pressing the FUNCTION button 3X Customized features Option 3 Level 1 requires pressing the FUNCTION button 1X Customized features Level 2 requires pressing the FUNCTION button 2X Multi car operation Level 3 requires pressing the FUNCTION button 3X Basic features Option 4 Level 1 requires pressing the FUNCTION button 1X Basic features Level 2 requires pressing the FUNCTION button 2X Customized features Level 3 requires pressing the FUNCTION button 3X Multi car operation Example If the multi level features were set to option 3 the setup would be as follows Level 1 Customized feature Level 2 Multi car operation Level 3 Basic features The Basic features are now programmed as level 3 and therefore To access the aux 2 feature the user needs to press on the FUNCTION button three 3 times followed by the LOCK button To access cold weather mode the user needs to
21. press on the FUNCTION button three 3 times followed by the START STOP button User Guide P 11 L E D Intrusion Codes If an intrusion took place while your vehicle was locked and the system was armed the L E D will provide feedback on the intrusion The L E D intrusion codes are flashed by the L E D in continuous loops and are as follows 1 flash power up reset battery disconnected and reconnected or dead battery 2 flash doors intrusion 3 flash shock sense 4 flash hood intrusion 5 flash panic 6 flash ignition Troubleshooting Poor Transmitting Range Many factors may affect the operating range of the transmitter Some of these are The condition of the battery in the transmitter The operating environment for example downtown radio frequency noise airports cellular phone towers Metal any type of metal will affect operating range This includes the metal in the car The shape of the vehicle can affect range as well vans in general have an especially poor range The shape of the roof and A pillars brings about considerable radio frequency deflection in this case the signal from the remote control As a result the direction in which the vehicle is facing in relation to the remote control can affect the range Straight on standing in front of the vehicle generally gives you the greatest range the second best performance is from the back Using the remote control from eith
22. ress of the START STOP button under safe start ON 4 sec Locking or unlocking a door with door pulses configured to 4 sec ON 25 sec The hood pin switch has been pressed twice the unit went into step 1 of the programming centre procedure and no transmitter activity was detected for 20 seconds Or the unit went into step 1 of the transmitter programming procedure and no activity was detected for a few seconds The unit has exited the transmitter programming procedure Irregular If the unit gives irregular signals 1 to 10 flashes followed by a pause followed by further flashes the system is playing back start failure codes This occurs when the hood pin switch is pressed three times Constant flashes up to 30 sec In horn mode alarm condition generated by an intrusion by panic mode or when the system is powered up Constant flashes up to 60 sec In siren mode alarm condition generated by an intrusion by panic mode or when the system is powered up
23. rm START Melody Starts the engine STOP None Melody Stops the engine Start and Stop While in Safe Start Mode FUNCTION BUTTON PRESS ICON BUZZER DESCRIPTION START ON SAFE START MODE X 2 Melody Press the and buttons simultaneously twice within 3 seconds Press for 1 second a melody will be heard then press 1sec and a melody will be heard again STOP ON SAFE START MODE None Melody User Guide P 15 P 16 User Guide Diagnostics Chirps Table Chirps Description 1 Doors locked alarm and starter kill armed Lock confirmation Entering mode 1 in the programming centre Disarmed notification 2 Doors unlocked alarm and starter kill disarmed Transmitter programmed Entering mode 2 in the programming centre 3 LOCK and arm while a zone is left unprotected Entering mode 3 in the programming centre Door zone left unprotected 4 Unlock and disarm an intrusion was detected in warning chirps mode or full chirps mode Entering tach programming mode 5 Siren or horn chirp timing adjustment Constant up to 30 seconds In horn mode alarm condition generated by an intrusion by panic mode or when the system is powered up the horn will sound for 30 sec Constant up to 60 seconds In siren mode alarm condition generated by an intrusion by panic mode or when the system is powered up the siren will
24. runk Release Engine Run Time Multi car Operation Remote Door Locks If your system was installed with the remote door locks option you will have the convenience of remote keyless entry See section arming and disarming the system earlier in this guide for further instructions on remote door locking and unlocking User Guide P 7 P 8 User Guide Priority Door Access If the Remote Door Locks option is installed on your vehicle this safety feature allows you unlock solely the driver s door with a single press of the UNLOCK button on the transmitter upon a second press of the UNLOCK button all the other doors will unlock Active or Passive Arming The alarm and starter kill can be configured either to passive mode so as to arm automatically or active mode so as to require user intervention for arming By default your system is configured to passive mode In passive mode the alarm and starter kill will automatically arm 30 seconds after the last door is closed The system will not arm if a door is left open or if you re open a door within the 30 second delay Important When the system re arms automatically or if there is an alarm condition you can disarm the system by simply pressing the UNLOCK button The Starter Kill and the Anti grind Feature With this added security feature the system will prevent your vehicle from starting with the ignition key when the starter kill is armed If your system was installed with the
25. sets Heater amp Heated Seat When leaving the vehicle it is recommended to preset the accessory controls in preparation for the next remote start Settings for the blower motor fan front and rear as well as heated seats if equipped should not be left on HIGH It is recommended to leave the settings on LOW or MEDIUM instead Windshield Wipers amp Radio amp Headlights Certain vehicles require the radio and or windshield wiper and or headlight circuits to become energized while running under remote start When leaving the vehicle you must ensure that the windshield wiper and headlight switches are OFF Leaving the headlight switch ON on certain types of vehicles could cause them to remain ON even after remote starter shut down resulting in a dead battery Driving Off With the vehicle running under remote control press the UNLOCK button to disarm and unlock the doors Enter the vehicle and do the following Turn the ignition key to the IGNITION ON RUN position Do not turn the key to the CRANK position while the engine is running This would cause the starter motor to re engage Press the brake pedal to disengage the remote starter unit You are now ready to drive off Using the System Arming and Disarming the System To disarm the alarm and starter kill if installed and unlock the doors if installed 1 Press and hold the UNLOCK button for approximately 1 second There will be two chirps if the siren or horn
26. starter kill option one will not be able to start your vehicle with the key unless the system has been unlocked and disarmed first or put into valet mode Note If the starter kill is installed your vehicle will benefit from a protection against starter motor damage that could occur after remote starting the engine should the user by force of habit turn the ignition key to the CRANK position Shock Sense Warn away Sense Your system will react to a full shock by triggering the alarm it can also respond to a lighter shock 30 of the strength of a full shock by giving a warn away without triggering an alarm condition When the engine is running after a remote start however the system will prevent any alarm condition to be triggered it will still give a warn away if this feature has not been disabled at installation Note After a remote start although the shock sensor is disabled all the other alarm triggering zones such as the doors or the hood may still trigger an alarm Disarmed Notification This feature will notify the user when the vehicle was left disarmed after the engine is shut down with the key removed and all doors are closed the siren will chirp once after a 10 seconds notification delay to warn the user that the vehicle was left unprotected The notification can be avoided by pressing the LOCK or UNLOCK button on the transmitter The user will likewise be notified after the system is disarmed using the transmitter
27. ther buttons 1 Ensure that all the doors are closed and that the shifter is in the neutral position 2 With the engine already running apply the parking brake and release the brake pedal Make sure to release the brake pedal 3 Within 20 sec push LOCK UNLOCK or START STOP on the transmitter The parking lights will flash 3 times quickly and remain lit 4 Remove the key the engine will go on running 5 Exit the vehicle and close the door 6 Press the TRUNK button until the system is armed the doors will be locked if remote door lock is installed P 4 User Guide User Guide P 5 If the pre programmed run time expires or if the user shuts down the engine by remote control the vehicle will get in ready mode Caution Do not leave children or pets unattended in a vehicle standing in idle mode Turbo Mode If turbo mode is configured at installation it will allow a turbocharger to idle down after the user leaves the vehicle the unit will take over the vehicle and keep it running for 60 seconds or until it is shut down by remote control then shut down the engine and set the system to ready mode To activate turbo mode follow all steps of the ready mode routine 1 Ensure that all the doors are closed and that the shifter is in the neutral position 2 With the engine already running apply the parking brake and release the brake pedal Make sure to release the brake pedal 3 Within 20 sec press LOCK UNLOCK or START STOP on
28. tion of the starter kill option later in this guide To activate panic mode Press and hold the UNLOCK button for approximately 3 seconds until the sound signal starts and the parking lights flash this will unlock the doors before the sound signal starts Or press and hold the LOCK button for approximately 3 seconds until the sound signal starts and the parking lights flash this will lock the doors before the sound signal starts P 6 User Guide Panic mode will automatically shut down after 1 minute Note To stop panic mode before the end of its delay press the LOCK or UNLOCK button until the sound signal stops Quick LockoutTM Also called secure panic For fast protection in emergency situations the system will lock all doors when you press the brake pedal while you hear the sound signal Quick Lockout is only available when panic mode has been set off Cold Weather Mode When cold weather mode is active the engine starts every 2 hours and runs for 4 minutes or for 9 or 20 minutes with diesel engines The system must be in ready mode in order to enter cold weather mode Cold weather mode automatically ends after 24 hours To enter cold weather mode Press and release the FUNCTION button and then press the START STOP button for 3 seconds until the parking lights flash three times The remote control will play a melody and the icon will appear on the display To exit cold weather mode do any one of the fol
29. ure lock will relock your doors as soon as the vehicle has started Once the engine run cycle ends secure lock will rearm your factory security system Turbo Mode When left in turbo mode the system will keep the engine running for 60 seconds before shutting it down This is to allow a turbocharger to idle down after the user leaves the vehicle See turbo mode section earlier in this guide Remote Trunk Release If your system was installed with the remote trunk release option you can open your trunk by pressing the TRUNK button for 3 seconds on the remote transmitter or by pressing the TRUNK button twice within 3 seconds Engine Run Time 15 20 minutes by default If you have a gas engine your System can be programmed to run the engine for 4 15 or 25 minutes 15 minutes by default If you have a diesel engine the System can be programmed to run the engine for 9 20 or 30 minutes 20 minutes default Multi car Operation This option allows the owner of two vehicles both equipped with System systems to control both systems with a single remote control To control the second vehicle simultaneously press the TRUNK button and the button of the function you wish to use See the transmitter operation table earlier in this Guide for full instructions on second car operation P 10 User Guide Note Your remote control must be configured for second car operation by the installer Missing a Start or a Stop Confirmation If you have not r
30. will eliminate accidental remote starts e g when children are playing with the transmitter If swap start mode is selected to remote start your vehicle press LOCK and UNLOCK simultaneously The AUX 2 output can be activated by pressing the START STOP button Home Valet TM If this feature is installed the user will have the possibility to remotely set the vehicle to a no remote start mode See home valet section earlier in this guide for full instructions Ignition controlled Door Locks This is an added security feature If your system was installed with the ignition controlled door locks option the doors will automatically be locked as soon as the ignition key is turned to the IGNITION ON RUN position while the brakes are pressed When the key is turned to the OFF position the doors will automatically be unlocked Ignition Re lock On systems of this series when ignition controlled door locks are enabled and the ignition key is in the IGNITION ON RUN position should any door be unlocked and opened all doors will be relocked next time the brake pedal is pressed Secure Lock Before it can remote start your vehicle the system must first disarm the factory security system The secure lock feature may be required on certain vehicle models with factory security systems that automatically unlock the doors when the security system is disarmed To keep your vehicle protected when the factory security system is disarmed for a remote start sec
Download Pdf Manuals
Related Search