Home

User Guide

1. Interface Up to Three E Computer or Tablet 2 A Digital Valve 1 HOT COLD AC ae Power Water Inlets Shower Fittings AC Power Shower Fittings Water Inlets System Layout IMPORTANT To access the controller Web pages for system setup the controller and a computer or tablet must be connected to the same router NOTE Internet access is required for downloading the latest software for system components The controller powers the interface s and controls the digital valve s and other system components n An Ethernet cable is provided with the controller for connection to the router If the router is not within 25 7 6 m of the controller obtain a longer Ethernet cable or add an extension cable A data cable connects each system component to the controller One interface located inside the showering enclosure is required for system operation Two additional interfaces can be connected to the system One or two valves can be connected to the system Choose a 2 port 3 port or 6 port valve in any combination Refer to the Configuration sections for shower configuration options
2. Shower Massage Path shower gt massage Function activates the massage feature Factory default off NOTE To see the massage icon on the shower screen the feature must be enabled on the controller Web pages on both the System page as well as the Valve page s To enable the massage feature refer to the Web Settings System section and the Web Settings Valve section IMPORTANT For proper function all shower fittings on the same valve that are enabled with massage must have total egual flow rates For example if one valve outlet supplies water to two bodysprays the total flow rate of both bodysprays must egual the flow rate of a single fitting supplied by a different outlet From the shower screen touch the massage icon A pop up window will appear showing massage options If two valves are connected to the system the massage options are selected independently per zone o The pop up window displays massage cycling options single or wave and cycling speed Touch the single or wave option to set the massage function n Single Pulses rotate through the enabled shower fittings one at a time o Wave Pulses rotate through the all but one of the enabled shower fittings one at a time To change the cycling speed touch speed or the triple arrows to the right The number of highlighted arrows indicates the spee
3. Settings Service Diagnostics Updates l Internet Update Internet Connected Check for Updates Manual Update Choose File File XX Upload Version Code 00 Web Service Updates Web page path Service gt Updates Function enables download of available system software updates NOTE The controller will check for software updates daily around midnight and will automatically ad the software Software can also be updated manually NOTE Internet access is reguired for downloading the latest software for system components Make sure the computer or tablet from which the controller Web pages are being accessed is connected to the internet Click on the Service tab then on Updates Click Check for Updates to download the latest software for any connected system components If updates are available the controller will automatically download the software To manually download updates from a file click Choose File then browse for and select the file Once the file is selected click Upload NOTE Software installation must be completed from the interface Refer to the System Settings Update section KOHLER Kohler Co 35 1241234 5 A Idle Screen home 38 32 1 0 00 Pe Monday 25 July 2014 CODA shower users 2 steam lights music Y 4J spa s
4. Lighting Ambient Rain Color Path lighting gt effect gt color Function sets the color of the rain panel light to a selected color Factory default neutral white NOTE To see the lighting icon on the interface home screen the K 98741 lighted rain panel must be installed and connected to the system controller From the home screen touch the lighting icon Touch the color tab The color tab displays a color wheel and a hue adjustment bar Color Wheel n The color wheel consists of swatches circles of color The inner three swatches are whites neutral cool and warm To change the color of the rain panel light to a color shown on the wheel touch the desired color The ring around the selected color will illuminate Touch start to turn on the rain panel light to the selected color Color Hue Adjustment NOTE The hue adjust bar is not accessible when one of the three whites is selected inside the color wheel or when the rain panel light is off The hue adjust bar is used to adjust the light color to a hue other than the options shown in the color wheel To adjust the color hue touch the arrows to the left or right of the hue adjust bar Kohler Co 65 1241234 5 A Lighting Ambient Rain Color cont The color shifts in 5 increments based on the color wheel The left arrow s
5. Refer to the installation guides packed with each product for specific installation needs Before Operating the System For the First Time Download and install the latest software for connected components This may take an hour or more to complete based on system configuration and internet connection speed Do not disconnect the power from any components during software download and installation Refer to the Download Install Software section for download instructions Kohler Co 5 1241234 5 A AC L i Internet Power Service S Power Cord m DJ Sania Th k Ethernet Cable SME Tahaa and ptional Components gt Controller 4 To Digital Valve s Download Install Software NOTICE Software download and installation may take an hour or more to complete based on system configuration and internet connection speed Do not disconnect the power from any components during software download and installation NOTE Internet service is required to receive the latest updates for system components The components must be connected to the controller prior to software download Initial Download Disconnect the power from the controller Make sure all system components are connected to the controller Connect the Ethernet cable from the controller to a router with active internet serv
6. target 101 ae D D home massage massage massage Shower Valve Zones Shower zones will display according to the number of valves hooked up to the system One Valve Shower fittings will be displayed directly below the temperature bar The link icon at the left side of the temperature bar will be linked and inaccessible since there is only one valve that can have temperature adjustments Shower fittings will be displayed directly below the temperature bar Two Valves Zones Zones will appear when there are two digital valves connected to the shower system Zone 1 first tab zone 1 has the primary default showerhead in it This valve is plumbed to the primary shower rain head and 2 bottom bodysprays Zone 2 second tab has is plumbed to the two shoulder overheads hand shower two top bodysprays and foot sprays By default both zones are linked o Touching the x icon at the top right of the pop up window will cancel auto purge and return to the previous screen 1241234 5 A 52 Kohler Co shower 8 32am shower 8 32am target temperature Shower warm up o es _ _ _ 101 101 Gon 8 o target 101 A ee gt ES C COLI C e ra home Massage Massage gt i gt Shower Auto Purge NOTE The auto purge feature must be enabled on t
7. If the LED does not turn green when the device is turned on increase the volume on the device NOTE Audio input may be slightly delayed when a device is initially connected To hear the audio signal from the device touch the listen tab then touch the play icon The play icon changes to a mute icon To silence the audio sound touch the mute icon To regain the sound touch the un mute icon To adjust the volume touch the circle to slide it along the bar Slide up to increase volume slide down to decrease volume 1241234 5 A 70 Kohler Co home spa 8 32am amp i spa intensity level Q L T J 8 u 32 P medium Monday O gt 22 July 2014 A reathe CLICA ey mC shower users L S p s relax DEN steam lights music ont Co en settings home Spa Setup Path spa gt choose experience gt options Function allows selection of spa intensity level beep setting and duration Factory default medium beep off short NOTE For the spa icon to be displayed on the interface home screen spa must be enabled on the controller Web pages To enable the spa feature refer to the Web Settings System section NOTE Spa can be initiated whether shower is on or off The spa feature will override running shower features including massage It will also override any active timers
8. The pop up will display the actual temperature for both zones for two connected valves User cannot adjust target temperature while purge is running Will purge to set target temperature Kohler Co 53 1241234 5 A shower 8 32am shower 8 32am AR 101 102 shower temperature target 101 target 102 1 s Ow 1 s WO massage massage o OG o YA Shower Adjust Temperature Path shower gt blue down arrow or red up arrow Function allows water temperature adjustment anytime water is flowing from a shower fixture From any screen on the interface when water is running touch the blue or red temperature arrows below the screen o Touch the blue arrow to decrease temperature touch the red arrow to increase temperature A pop up window will appear showing the target shower temperature o The link icon at the top of the pop up window indicates whether the target temperature is being adjusted for one valve or both valves A closed link icon means the target temperature for both valves is the same and both will be adjusted at the same time when the arrows are touched An open link icon means the target temperature for each valve can be adjusted independently To adjust target temperature for each valve independently touch the link icon to chang
9. steam lights music Y 4J spa settings Power On Off Interface Turn Features Off The system allows the option to turn off the entire system or turn off individual features while leaving others on To turn off the entire system refer to the Interface Power System On Off section NOTE If no features are active the stop icon will not be illuminated and will not be accessible Turn Off Within a Feature NOTE Within a feature screen if that feature is not currently on the stop icon will not appear Instead a green start icon will be displayed until the feature is activated Each system feature except music will display a stop icon while the feature is on To turn off an active feature from within that feature screen touch the red stop icon o A pop up window will appear showing all features that are currently on Touch the radial button next to the feature s that you want to stop Press ok to confirm All selected items will turn off Turn Off From Home or Settings Ask Off NOTE If no features are running the stop icon will not be illuminated and will not be accessible To selectively turn off active features touch the red square stop icon A pop up window will appear showing all features that are currently on Touch the features you want to stop The selected features and associated radial buttons will be highlighted
10. aaaea 54 Shower Dual Temperature Multiple Valves Only eee 55 Shower Maximum Cold 2 0 ee 56 Shower Massage lt 33 e 58 Band vir daa ieee Oo ese A lek bag 6 Ped eh e Oe o Eee LY 57 Users Setting Preferences lt 0 ee 59 Steam Setup ciar ada E Ae Ba Se EA A Sea Deis eH d a Ven ko Ma 60 SCE n M a ia a O aed ang ates anh 2 61 Steam Del ge a sss 43k kladu oa aaa Asda dees oA oe So aed B B LA R Kk o ended US Kk AE ALOE 62 Steam Power Clean ee 63 Lighting Ambient Rain Effects lt eee eee 64 Lighting Ambient Rain Color lt lt eee eee 65 1241234 5 A 2 Kohler Co Lighting Ambient Rain Options lt lt eee ee eee 67 Music Controls ca on ova kud k a Gale Shaded Yeu aes tetera de eee anes aa 68 Music Bluetooth Input 5 1 sv opc tee cared toe peed eee eel Bok d dod eee ek OE OE bibo ku 69 Music Lines Is z osa be 4 atte bee cde dade al m eerie Anda A lany teehee EEVEE ase 70 Spa T ss zs k RA pti kod A du OG bee a OSs eee 71 Spa Stat esmero ca ceed KERE db Ki a eR Lake weeded awe eee ees 72 Spa Adjust Script ssc 25 mx ele ane koa d va so pl we pon dd a Ja oko a lk k 74 Time Minute Timer ox eee ne ee eS Ee Se Pewee baa ee See ee wa 76 Time Alarm Clock 1 0 a aiea na a a ee 77 Time Bath Fill sec iea acah ii rr ra a a de cea oie eta Se eed ee weed add Pes 78 FCC and IC Compliance FCC Interference Statement This device compli
11. Touch the system option then touch date amp time Select the set date tab Using the up and down arrow icons set the month day and year o Touch the desired date format The radial button to the left of the selected format will illuminate mm dd yy month day year e dd mm yy day month year e yy mm dd year month day Touch the home or back icon to exit the date amp time menu 1241234 5 A 48 Kohler Co system 8 32am system 8 32am G gt a N about gt about gt gt S gt S update gt update gt Ne 2 p ds a A SN date 8 time gt date amp time M 1 X gt gt C F units No A o fe gt a language gt language L V A So A D gt D gt System Settings Temperature Unit Path settings gt system gt units gt C or F Function sets the temperature to display degrees Celsius or Fahrenheit Factory default F NOTE The temperature is displayed on the interface screen when the shower steam spa and massage features are activated Temperature can be adjusted at any time while these features are functioning by touching the blue or red arrow From the home screen touch the settings icon Touch the system option Touch the units option to change the temperature unit to Celsius C or Fahrenheit F Touch the home or back icon to e
12. Press ok to confirm All selected items will turn off Kohler Co 37 1241234 5 A home settings 8 32am interface 8 32am r a display gt N lt s O N s system gt auto return E Monday a lt 22 July 2014 a y start up gt A clean amp Se 7 shower users lt beep per D S 7 L uN steam lights music lt Kn spa home home back Interface Settings Overview Path settings gt interface Function allows customization of interface settings The customization is specific to the individual interface If a system has multiple interfaces modifications to one interface will not appear automatically on the other interface For example the interface inside the shower can be set to a higher or lower brightness than the interface outside the shower NOTE The settings menu is not accessible when water is running or steam is on A not available pop up window will appear if the user touches the settings icon while any shower or steam feature is activated The interface settings menu consists of five categories Display adjusts screen brightness and dim settings Auto Return returns the interface to the highest active feature screen after 30 seconds of inactivity Start Up sets the screen that appears at start up Clean locks the interface for 30 seconds so the screen can be cleaned Beep adjusts the volume of the
13. O O O O oj o O O O O oj o O O O O oj o O O O O O o O O O NOTE Primary outlets and any outlets designated as O Constant on handshowers will not be included in the cycling pattern For O On while cycling installations that include both body sprays and watertiles the outlets designated as watertiles will not cycle Shower Configuration Custom IMPORTANT For proper shower system setup and performance especially regarding massage and spa function refer to the Shower Configurations Overview section for important information NOTICE Custom shower configurations may not allow certain system features to be enabled NOTE Configurations other than the preprogrammed options will limit preprogrammed spa and massage functions General Guidelines for Custom Configurations Outlet 1 is always recommended to be the primary showerhead Custom mode will allow the user to select a different port as the primary but it is not recommended When cycling during massage functions bodysprays watertiles will cycle from Outlet 1 to Outlet 6 regardless of which port is designated as the primary outlet The installer must determine the water outlet cycling order for the Single massage function and plumb each water outlet accordingly Use the above diagrams to draw in the components for your custom shower Draw lines from the valve to each component as your shower is plumbed
14. Kohler Co 23 1241234 5 A Py Showerhead B 2 Showerheads q Bodyspray 6 e 2 Bodysprays 3 Bodysprays A Handshower Web Settings Water Outlet Options Web page path Settings gt Valve 1 or Valve 2 lt L O as se Overhead Rain Panel Watertile 2 Watertiles 3 Watertile 2 Foot Sprays Only certain water outlet options will be available depending on your system configuration The above illustration shows the range of water outlet fittings that can be plumbed to the valve 1241234 5 A 24 Kohler Co Settings Service KOHLER system users Valve 1 Valve 2 Interface Music Lighting Steam About Outlet 1 Outlet 2 Outlet 3 O Default Default O Default L Ma p Massage Massage G Auto Purge Auto Purge Outlet 4 Outlet 5 Outlet 6 O Default O Default O Default Massage O Massage O Massage Auto Purge O Auto Purge O Auto Purge Temperature Custom Massage Order example 1 3 2 4 6 5 Default Temperature O Max Temperature Cold Wate i Custom Massage Order Auto Purge 7 Seconds O Web Settings Default and Maximum Temperature Web page path Settings gt Valve 1 or Valve 2 Function set the default and maximum water temperature for each valve Default Temperature In the Default Temperature box enter the desired default temperature The factor
15. NOTE Only water outlets designated as bodysprays or watertiles will be allowed to cycle Any outlets with 2 fittings such as 2 bodysprays or 2 watertiles will not cycle Also any instance where watertiles and bodysprays are used in the same configuration only the bodysprays will cycle Massage Options e Single e Wave 1241234 5 A 18 Kohler Co Web Pages Interface Service Users Valve 1 Valve 2 Interface Settings home Available Shower Configurations Configuration A v 8 z 32 Date Time Monday 5 14 2014 12 40 P 0600 22 July 2014 Day Light Savings Time interface p Date Format O Q ame MM DD YYYY system gt ODD MM YYYY shower users OYYYY MM DD a RI L Time Format E 4 gt Dd 12 Hour steam lights music O 24 Hour ES Language Units English v Fahrenheit spa QO Celsius OSettings Lock Settings Overview All system settings such as valve setup can be configured from the controller Web pages Some settings can be configured from the interface For additional information on how to configure specific settings refer to the appropriate sections in this guide From the Web Pages On a computer or tablet connected to the same router as the controller open a browser and enter the controller IP address To obtain the IP address refer to the Initial System Setup section o Clic
16. The user can choose from eight different light mood options Available effects are color cycle sunrise sunset sunny clouds thunderstorm water reflections warm energy and cool calm Factory default color cycle NOTE To see the lighting icon on the interface home screen the K 98741 lighted rain panel must be installed and connected to the system controller From the home screen touch the lighting icon The effects tab displays four light effects per page To view additional effects touch the arrow at the right To return to the previous screen touch the arrow at the left n Touch the desired light effect The radial button to the left of the selected effect will illuminate Touch start to turn on the rain panel light and begin the sequence The green start icon will change to a red stop icon and the lighting sequence will continue to loop NOTE A different light effect can be selected at any time while the current effect is running To change to a different light sequence selected the desired effect then touch start The light sequence will immediately change to the new effect 1241234 5 A 64 Kohler Co lighting 8 32am lighting 8 32am lighting 8 32am effect MR ee ESSR o color cycle O C 0000 gt Kha a e e hue adjust es e 2 K d K a ey eleg LU J eC options options options
17. auto dim tab Select the desired inactivity time frame after which the screen will dim n Touch the home or back icon to exit the display menu Kohler Co 39 1241234 5 A interface 8 32am interface 8 32am O ON a gt displa gt display gt Nu 24 X C 3 amp auto return Ns 7 Nu O N a start up gt start up L W Es XN A O N gt G o clean clean M A X 2 O N 7 gt beep beep X S N A home back home back Interface Settings Auto Return Path settings gt interface gt auto return gt ON or OFF Factory default OFF red x When ON Based on the order of precedence the interface will return to the screen of the highest active feature after 30 seconds of inactivity The order of precedence is spa if equipped shower steam music lighting home If within the settings screens the interface will return to the home screen after 1 minute of inactivity When OFF The interface will remain on the current active screen From the home screen touch the settings icon Touch the interface option Touch the auto return option to turn ON designated by a green checkmark or OFF designated by a red x Touch the home or back icon to exit the interface settings menu 1241234 5 A 40 Kohler Co Two Valves Connected One Valve Connected interface 8 32am start up 8
18. gt Z gt units F shower users E a language gt D A D S S L 4 AN steam lights music spa home home back System Settings Overview Path settings gt system Function allows modifications to general system settings and contains information about connected system components Changes to system settings on one interface will automatically appear on any other connected interfaces NOTE The settings menu is not accessible when water is running or steam is on A not available pop up window will appear if the user touches the settings icon while any shower or steam feature is activated NOTE Additional system settings beyond those available on the interface can be modified from the system controller Web pages Refer to the Web Settings System section The system settings menu consists of five categories About displays software information for connected system components Update allows manual download of available system software updates Date amp Time sets the date and time display Units sets the temperature to display degrees Celsius or Fahrenheit Language selects the interface display language From the home screen touch the settings icon Touch the system option Select a category to view adjust system settings as desired NOTE The back icon appears on all settings screens Touch the back icon to return to the previous
19. installation takes place n Once installation of all component updates is complete the interface screen will return to the idle screen Kohler Co 47 1241234 5 A system 8 32am date amp time date amp time 8 32am 9 about set time set date Xe A q L E ZS A a aX a a gt 10 00 10 30 14 U OU am O N N27 WwW SY N27 Nw Nw F Ne A G MES O mm dd yy C O 24 hour clock E language gt C J De a gt DST amp Ae D pe Lo O iH o 9 Uy 9 9 home back home back home back System Settings Date amp Time Path settings gt system gt date amp time Function sets the date and time display Factory default 12 hour clock mm dd yy DST disabled Set Time From the home screen touch the settings icon Touch the system option then touch date amp time Using the up or down arrow icons set the hour and minutes and chose am or pm To change the time display to 24 hours touch the 24 hour clock option The icon at the right will change from a red x to a green checkmark WW To enable daylight savings time touch the DST option to change the icon from a red x to a green checkmark When enabled on the interface daylight savings time will automatically be enabled on the controller Web pages Set Date From the home screen touch the settings icon
20. screen Touch the home or back icon to exit the system settings menu Kohler Co 45 1241234 5 A system 8 32am a about about X A O CON Controller User Interface 2 paste gt Hardware vO 0 0 0 OS v0 0 0 0 Firmware vO 0 0 0 Graphics vO 0 0 0 IP 0 0 0 0 Language v0 0 0 0 C date amp time gt MAC 00 14 6F 0E 10 D5 TouchPanel v0 0 0 es O m jb User Interface 1 ee Valve 1 6 Port Valve units F OS v0 0 0 0 Firmware v0 0 Ne A Graphics v0 0 0 0 C S Language v0 0 0 0 Valve 2 6 Port Valve language gt TouchPanel v0 0 0 Firmware v0 0 Ne E o 9 home back System Settings About Path settings gt system gt about Function displays software information for connected system components From the home screen touch the settings icon Touch the system option then touch about A pop up window will appear showing software information for any connected components The information may take a few seconds to appear NOTE Depending on the number of connected components software information may span more than one pop up window n To view additional software information touch the arrow to the right of the ok icon n To return to the previous pop up window touch the arrow to the left of the ok icon Touch ok or x at the top right of the window to exit the about pop up
21. touch the settings icon n Go to system then to updates A pop up screen will indicate if updates are available for any connected system components From the Web Pages On a computer or tablet connected to the same router as the controller open a browser and enter the Web IP address To obtain the IP address refer to the Initial System Setup section o Click on the Service tab then on Updates Click Check for Updates to download the latest software for any connected system components If updates are available the controller will automatically download the software Shower Configurations Overview NOTICE Do not allow any outlet to flow more than 10 gal min 37 9 1 min NOTICE Custom shower configurations may not allow certain system features to be enabled Shower configurations are available based on the number of valves connected to the controller For optimum valve performance the water heater should be set at 120 F 49 C Hot water pressure should be equal to or less than the cold water pressure o Showering configurations using large water volumes require supply piping and drain systems that will sufficiently accommodate the actual total flow rate at any one time Hot water generation Use a water heating system capable of handling large flow rates Tankless on demand water heaters and recirculating pumps may not be adequate f
22. 1 5 e Three port valve zone 2 3 Flow Rates NOTE Water flow rates are calculated below based on eight used outlet ports with equal flow rates If additional valve outlets are being used or your fittings have varying flow calculate the total flow rate accordingly e Total with 2 2 gal min 8 3 1 min per outlet 17 6 gal min 66 6 l min e Maximum total with 2 5 gal min 9 5 1 min per outlet 20 gal min 75 7 l min Massage Options e Single e Wave Spa Compatibility e Relax e Focus calm energy e Breathe Kohler Co 13 1241234 5 A 16326826 3 Os a 4 EE ral 5 ge y ES 3 Port Valve a 30 4 G 6 Port Valve Zone 1 he A Zone 2 im q Sr Shower Configuration B Option 3 IMPORTANT For proper shower system setup and performance especially regarding massage and spa function refer to the Shower Configurations Overview section for important information Valves Outlets Used e Six port valve zone 1 5 e Six port valve zone 2 5 Flow Rates NOTE Water flow rates are calculated below based on 10 used outlet ports with equal flow rates If additional valve outlets are being used or your fittings have varying flow calculate the total flow rate accordingly e Total with 2 2 gal min 8 3 1 min per outlet 22 gal min 83 3 l min e Maximum total with 2 5 gal min 9 5 1 min per outlet 25 gal min 94 6 l
23. 32am start up 8 32am a S t start igate to t start igate to display gt at start up navigate to at start up navigate to Ng A a X o home ty O home to auto return K k J users Q users Q a O gt zone 1 6 shower 0 X i X a gt zone 2 6 OR clean C X 2 spa o G gt beep steam gt SS 2 lighting IN music home back home back home back Interface Settings Start Up Path settings gt interface gt start up Function sets the screen that appears at start up For example the user can set the initial interface screen to show zone 1 of the shower feature when the system turns on Factory default home NOTE Depending on system configuration and the number of connected valves some feature screens may not be available From the home screen touch the settings icon Touch the start up option Touch the desired feature screen to display at startup The radial button to the left of the selected screen will illuminate Touch the home or back icon to exit the start up menu Kohler Co 41 1241234 5 A interface 8 32am interface 8 32am O ON i A display gt display gt NS A Xe A O N a gt auto return auto return gt lt gt lt start up gt start up gt K A X e 7 7 gt S 8 0 29 clean G Nas SP No P O N gt beep beep X P Ny D gt D gt Interface Settings Cle
24. Options e Single e Wave Spa Compatibility e Relax e Focus calm energy e Breathe Kohler Co 11 1241234 5 A 32 1 3 Port Valve Zone 2 3 Port Valve Zone 1 Shower Configuration B Plumbing Layout 1 IMPORTANT For proper shower system setup and performance especially regarding massage and spa function refer to the Shower Configurations Overview section for important information Valves Outlets Used e Three port valve zone 1 3 e Three port valve zone 2 3 Flow Rates NOTE Water flow rates are calculated below based on six used outlet ports with equal flow rates If your fittings have varying flow rates calculate the total flow rate accordingly e Total with 2 2 gal min 8 3 1 min per outlet 13 2 gal min 50 l min e Maximum total with 2 5 gal min 9 5 1 min per outlet 15 gal min 56 8 l min Massage Options Single e Wave Spa Compatibility e Relax Focus calm energy e Breathe 1241234 5 A 12 Kohler Co 6 Port Valve 3 Port Valve Zone 1 L Zone 2 123456 UU Shower Configuration B Plumbing Layout 2 IMPORTANT For proper shower system setup and performance especially regarding massage and spa function refer to the Shower Configurations Overview section for important information Valves Outlets Used e Six port valve zone
25. amount of time the user preset will determine which outlets remain on The auto purge function will only activate if the shower has been inactive for 30 minutes or longer o Click the radial button next to Auto Purge to activate the function Select the desired auto purge time duration in the dropdown box next to Cold Water Time duration options are 2 minutes 5 minutes 7 minutes or 10 minutes To deactivate auto purge click the radial button a second time to uncheck it 1241234 5 A 26 Kohler Co Settings Service KOHLER System Users Valve 1 Valve 2 Interface Music Lighting Steam About Outlet 1 Outlet 2 Outlet 3 O Default Default O Default L y Massage Massage Auto Purge Auto Purge Auto Purge Outlet 4 O Default O Default O Default Massage O Massage O Massage Auto Purge O Auto Purge O Auto Purge Temperature Custom Massage Order example 1 3 2 4 6 5 O Default Temperature 100 a v a Y Max Temperature 113 Cold Water 5 Minutes Custom Massage Order Auto Purge 7 Seconds O Web Settings Massage Web page path Settings gt Valve 1 or Valve 2 IMPORTANT Please read the following information regarding the possible risks associated with massage Consult your physician before any hydrotherapy treatment especially if you are pregnant have cancer or heart disease As
26. amplifier will display on the device as Kohler KA02 If a BLUETOOTH pin is required enter 0000 When the device is paired and connected the device ID name is shown in place of the Bluetooth option and the LED on the amplifier will blink blue Once a signal is detected from the Bluetooth device the LED on the amplifier will turn solid blue To disconnect from the Bluetooth device touch the device ID A pop up will appear to allow disconnection Kohler Co 69 1241234 5 A music 8 32am music 8 32am MCR So ME options line in bass treble balance volume nas EL home home options Music Line In Input Path music gt input gt line in 1 or line in 2 Function enables access to a signal from an audio device with a wired connection to one of the line in ports on the amplifier NOTE To see the music icon on the interface home screen the K 99696 amplifier must be installed and connected to the system controller To hear audio signals through the amplifier speakers must be properly connected to the amplifier Refer to the amplifier Installation and Care Guide From the home screen touch the music icon Touch the input tab Touch the line in 1 or line in 2 option Once a signal is detected from the connected device the LED on the amplifier will turn green
27. of usage before a cleaning cycle is required After 600 minutes your system will bring you directly to the Power Clean screen The cleaning cycle must be completed in order to reset the 600 minute counter and enable steam use NOTICE Power clean will run for 45 minutes Once activated you must remain out of the steam area until the cleaning cycle has completed n From the home screen touch the steam icon If the steam feature has previously been activated for a total of 600 minutes a power clean pop up window will appear The pop up window indicates that the power clean feature must be run Start Power Clean To initiate the cleaning cycle touch start then exit the steam area immediately The pop up window will display a 1 minute countdown before cleaning begins o When the counter reaches zero the cleaning cycle turns on and will run for 45 minutes During cleaning the power clean window will display rotating arrows CAUTION Stay out of the steam area until the cleaning cycle is complete To cancel the cleaning cycle touch the power icon The interface will display the idle screen Kohler Co 63 1241234 5 A 8 3 2 p 0 2 gt gt DAM k a aoe wow 8 Lighting Ambient Rain Effects Path lighting gt effect Function scripted light sequences are pre programmed to the lighted rain panel
28. window 1241234 5 A 46 Kohler Co system 8 32am C 69 a gt a gt E gt update updating NE A X S o interface K A a E gt ly units F X A O N language gt X L T K p GU d home back System Settings Update Path settings gt system gt update Function allows installation of available system software updates Factory default all available updates selected for installation IMPORTANT Do not disconnect the power from any components during software installation NOTE The system controller will check for software updates daily around midnight and will automatically download the software Software can be selected and installed from the interface NOTE If an update is available an exclamation point will appear at the corner of the settings icons that lead to the update window From the home screen touch the settings icon Touch the system option then touch update A pop up window will list available updates for any connected system components NOTE By default all available updates are selected for installation It is recommended that all updates are installed immediately when available If desired touch components to deselect for update installation Touch ok to initiate installation A rotating arrows icon will appear in the window while the
29. with many types of therapies and massages hydromassage can be unsafe if a person has certain types of illnesses Consult a physician to determine whether hydromassage is suitable for your case when a condition is persistent or recurrent Elderly people and young children may be prone to exhaustion by too much heat and should avoid long full body heat treatments Activate Massage NOTE The massage functions are defaulted to OFF For this function to be available for use while showering it must be first activated in the System menu NOTE You may experience temperature variations during massage mode dependent on your particular installation For each outlet click the radial button next to Massage to activate the function for that outlet To deactivate the massage function for any outlet click the radial button a second time to uncheck it Custom Massage Two custom massage functions can be created using the Massage Order boxes In each box enter the desired order of the outlets that will cycle massage pulses The outlet number corresponds to the outlet designation shown in the upper part of the Valve 1 or Valve 2 Web pages o Enter the outlets according to number separated by commas example 1 3 2 4 Kohler Co 27 1241234 5 A Web Settings Massage cont Any sequence of numbers that is not separated by a comma will cycle those outlets at t
30. From the home screen touch the spa icon The spa menu is populated based on shower configuration Up to three spa experiences may be available depending on valve configuration To select a spa experience touch one of the available options on the spa screen Only one experience can be selected at a time o Touch the options icon to change spa intensity and duration as desired A pop up window will appear displaying the available choices To bypass shower warm up touch skip o While a spa experience is running the interface screen displays several indicators e Intensity dictates the rate at which the experience runs e Beep when enabled the interface will beep once at the end of each segment of the spa experience Duration long and short time durations are available for each spa experience The long time frame is ten minutes the short time frame is 5 minutes To apply the selected options touch the ok icon This does not initiate the spa function To start a spa experience refer to the Spa Start section Kohler Co 71 1241234 5 A spa 8 32am spa 09 59 O gt shower warm up ES focus A LOL X BB breathe target 101 target go 102 90 ES CEE B Jed 60 home options home Spa Start Path spa gt choose experience gt start Functi
31. User Guide Digital Interface and System Controller for DTV Francais page Francais 1 Espa ol p gina Espafiol 1 THE BOLD LOOK Of KOHLER 1241234 5 A Table of Contents FCC and IC Compliance vss ees De a eb hese ee eee Pee ee eee eee nes 3 Interface and Controller Anatomy sg a 8 0 R R 0 R r R a e R 9 ee 4 System LAVOU s msa nacre bdg sabe E bu ee eee 5 Download Install Software 2 ee ee RRR RER R RA R R a 6 Initial System Setup piece nia a a a a E a ai a h aia E a a a e Ta a E 7 Software Updates osci uz di fienda eae o eia eee Be bono ee A eo we ewe Rn ees 8 Shower Configurations Overview eee eee 8 Shower Configuration A Plumbing Layout 1 0 0000 ce ee 10 Shower Configuration A Plumbing Layout 2 0 0 ee 11 Shower Configuration B Plumbing Layout 1 ee 12 Shower Configuration B Plumbing Layout 2 ee ee 13 Shower Configuration B Option 3 lt lt lt eee eee ee 14 Shower Configuration C Plumbing Layout 1 see 15 Shower Configuration D Plumbing Layout 1 eee eee 16 Shower Configuration D Plumbing Layout 2 eee ee 17 Shower Configuration Custom lt eee ee 18 Settings OVOIVISW ascos elo s 28 ra d keet bres a a e bias 19 Web Settings System o ooo ooooooormr ee 22 Web Settings Users 22 Web Settings Valve sagat se bee aed dk a a Seed eed Seeded eee Pe kv d oil bak 23 Web Settings Water Outlet Options lt eee eee 24 Web Se
32. an Lock Path settings gt interface gt clean Function locks the interface for 30 seconds This allows the screen surface to be cleaned without inadvertently activating a feature or changing a setting NOTE The clean function only provides a temporary lock To block access to interface functions a code can be applied to the interface The code is enabled from the controller Web pages Refer to the Web Settings System section From the home screen touch the settings icon Touch the interface option then touch clean The green checkmark will illuminate and all interface keys including the power icon and the temperature arrows will lock for 30 seconds The remaining lock time will be displayed next to a padlock icon After 30 seconds the interface keys will automatically unlock Touch the home or back icon to exit the interface settings menu Access Code From the home screen touch the settings icon If an access code is required a pop up window will appear prompting the user to enter the 4 digit code The access code feature is enabled disabled from the controller Web pages The code cannot be enabled disabled or modified from the interface Touch the interface option then touch clean n The green checkmark will illuminate and all interface keys including the power icon and the temperature arr
33. arm ON The pop up window will disappear returning the interface to the previous screen While the alarm is on an alarm clock icon appears to the left of the time clock When the time display reaches one minute before the alarm time the interface will beep once When the alarm time is reached the pop up window appears showing the current time and the interface will beep every ten seconds The beeps cease after two minutes or when the user touches ok x or the power icon Cancel the Alarm To stop the alarm touch the time clock on any screen The pop up window will appear showing the programmed alarm time Touch stop to cancel the alarm The pop up window will disappear returning the interface to the previous screen and the alarm clock icon will disappear Kohler Co 77 1241234 5 A time elapsed A 59 00 00 7 minute timer da minute timer by O d 12D Ob d O alarm alarm tub fill O tub fill ston ok N X X Time Bath Fill Path time clock Function turns water ON from the bath spout for a set period of time at the default temperature Factory default ten minutes NOTE The tub fill option is only available on custom showers with a bath spout During system setup in the controller Web pages the appropriate valve outlet must
34. be assigned a bath spout icon Activate Bath Fill o Touch the time clock on any screen NOTE The clock is located above the home screen icons or at the right top corner of all other screens o A pop up window will appear showing the current time and three time related options Touch the tub fill option o To adjust the time duration touch the up or down arrows Minutes adjust sequentially Seconds adjust in 15 second increments Touch start to begin water flow from the bath spout If water was running from other fixtures when tub fill is activated the system shuts the other outlets OFF Water will flow only from the bath spout at the designated default temperature If water was not running from other fixtures when tub fill is activated water flows from the bath spout rising to the designated default temperature While tub fill is activated a countdown clock appears in place of the time clock on all screens When the specified time period has elapsed the pop up window appears with the countdown clock at zero and the interface will beep every ten seconds n The beeps cease after two minutes or when the user touches ok x or the power icon Cancel Bath Fill To stop water flow from the bath spout before the fill time as elapsed touch stop 1241234 5 A 78 Kohler Co Time Bath Fill cont Water flow will cease and th
35. d 0000 New Pin Web Settings Music Web page path Settings gt Music Function allows adjustment of default audio settings and changes to the Bluetooth pairing settings NOTE To see the Music menu on the controller Web pages the K 99696 amplifier must be installed and connected to the system controller To hear audio signals through the amplifier speakers must be properly connected to the amplifier Refer to the amplifier Installation and Care Guide To adjust the default settings for audio output click and drag the vertical rod along the horizontal bar for each of the four settings If a Bluetooth device is currently paired to the system the device ID will be displayed in the Current Bluetooth Connected Device field NOTE The Current Bluetooth Connected Device field cannot be edited It is for information purposes only To change Bluetooth paring settings enter the new reporting key and or password 1241234 5 A 30 Kohler Co Settings Service System Users Valve 1 WaterTile AmbientRain Light Fade Speed Valve 2 Iterace Music Default White KOHLER i Steam About Medium Neutral Default Brightness 100 bar the right of the field Effects Spread Web Settings Lighting Web page path Settings gt Lighting Slow Function allows adjustment
36. d setting one arrow slow two arrows medium three arrows fast For a two valve system the massage options must be selected in the zone 2 tab to activate the massage feature on fittings connected to the second valve Kohler Co 57 1241234 5 A Shower Massage cont NOTE The massage cycling feature runs independently on each valve For example the single option can be run on zone 1 while the wave option is run on zone 2 The cycling feature will not span across both zones To begin the massage feature touch start For a two zone system this activates massage on both zones If the selected massage option requires more outlets than are currently on then massage will turn them on based on what is enabled on the controller Web pages o The massage feature will continue to run until it is manually stopped The end massage cycling touch the massage icon on the shower screen then touch stop For a two valve system this ends massage on both systems 1241234 5 A 58 Kohler Co users 8 32am AT 88 102 oo by A G a gt user2 target 102 o CLICR home 8 32am N D C 0 4 fe CO Users Setting Preferences Path settings gt users gt choose user 1 through 6 Function allows guick access to saved user settings and customization of user preferences NOTE You do n
37. e from a closed link to an open link 1241234 5 A 54 Kohler Co s Ed Co target 2 shower temperature 103 ODLA shower users shower users 0 8 o 8 settings settings oval OG Shower Dual Temperature Multiple Valves Only Path shower gt lock icon Function When a system contains two valves a link icon will appear in front of the temperature divider line Linked Temperature Between Valves n When outlets from two valves are on a link icon will appear in front of the temperature divider line The icon indicates that the valves are linked at the same temperature When linked if the temperature is adjusted for one valve the other valve will automatically be adjusted to the same target temperature If one valve cannot maintain temperature within an acceptable range from the target the link icon will blink and both valve temperatures will be displayed The blinking link icon will blink indicates that the system is attempting to keep the temperatures linked Touching the blinking link icon will unlink the zones To Unlink Temperature Between Valves When outlets from two valves are on a link icon will appear in front of the temperature divider line The icon indicates that the valves are linked at the same temperature When linked if the temperature is adjusted f
38. e pause option will not pause a currently playing song Touching the play icon will resume the audio source to real time To adjust the volume touch the circle to slide it along the bar Slide up to increase volume slide down to decrease volume o Depending on the steaming source the backward forward arrows will either skip to the previous next song track or station The forward arrow does not allow rapid advance of the audio signal 1241234 5 A 68 Kohler Co music 8 32am music 8 32am amp ERJ MEE 4 options Connected to Device ID Bluetooth T Device ID Disconnect D l home home Music Bluetooth Input Path music gt input gt Bluetooth Function enables access to a signal from an audio device with a Bluetooth connection to the amplifier NOTE To see the music icon on the interface home screen the K 99696 amplifier must be installed and connected to the system controller To hear audio signals through the amplifier speakers must be properly connected to the amplifier Refer to the amplifier Installation and Care Guide NOTE All settings for Bluetooth pairing are controlled on the embedded Web pages Refer to the Web Settings Music section From the home screen touch the music icon Touch the input tab Touch the Bluetooth option A Bluetooth device can now be paired NOTE The
39. e pop up window will disappear returning the interface to the previous screen Kohler Co 79 1241234 5 A USA Canada 1 800 4KOHLER M xico 001 800 456 4537 kohler com THE BOLD LOOK Of KOHLER 2014 Kohler Co 1241234 5 A
40. e spa experience NOTE Adjustments to the current target temperature also apply to target temperatures for any remaining spa segments The adjustments are applied to the next segment target temperatures at the same differential For example if the current target is adjust 2 higher any remaining segment targets will also adjust 2 higher o To adjust the target temperature s touch the blue or red temperature arrows next to the power icon A pop up window will appear showing the target temperature s changing NOTE During spa experiences valve zones cannot be linked or unlinked so the link icon will be grey If the temperature is adjusted for one zone it will also be adjusted for the second zone Once the new target temperature is reached the pop up window disappears returning the interface to the spa screen The new target temperatures are displayed for the current and any remaining segments Adjust Spa Segments 1241234 5 A 74 Kohler Co Spa Adjust Script cont While a spa experience is running the target timeline displays back and forward arrows These arrows allow jumping to previous or next steps o Touch the back arrow to restart the current spa segment if active for less than 5 seconds or jump to the previous segment if active for more than 5 seconds o Touch the forward arrow to jump to the next segment Whether a segment is restarted
41. eRain v0 0 The displayed software information is what is current since the last download To receive the latest updates for any connected system components refer to the Web Service KOHLER Kohler Co 33 1241234 5 A Settings Service KOHLER Diagnostics Updates Connection Diagnostics Reset Six Port Valve Service menace I Valve 1 Calibration Code Connected Reset to Saved Default Interface 2 Reset System Connected Valve 2 Calibration Code 00 Valve 1 Connected Valve 2 Connected Error Log Number Source H M S D M Y UI Error 100 07 22 27 a m 05 14 2014 Controller Error 104 04 28 26 p m 05 13 2014 Controller Connected Steam Connected Amplifier Connected WaterTileRain Connected Web Service Diagnostics Web page path Service gt Diagnostics Function displays information on connected system components error log information and provides reset options Reset Options Reset to Saved Default resets the system back to the latest saved default on the System Web page Refer to the Web Settings System section IMPORTANT Clicking the Reset System will cause you to loose all settings on all system components Reset System removes all software updates and resets system components back to factory set versions 1241234 5 A 34 Kohler Co downlo
42. er Auto Purge 7 Seconds O Web Settings Valve Web page path Settings gt Valve 1 or Valve 2 IMPORTANT For proper function for a multiple valve system valve 1 zone 1 must be connected to the system controller before valve 2 zone 2 Confirm that valve 1 appears on the Web page before connecting the second valve to the controller Valve Configuration Custom Options For preprogrammed configurations refer to the Configurations sections Function sets the outlet icons of your custom configuration to match your shower installation IMPORTANT The fitting shown in the outlet window on the Web page should be the fitting that is physically plumbed to that valve outlet o Click the icon window to scroll through the list of available water outlet options for your shower configuration see Water Outlet Options section Select Default Outlet Function sets the water outlet that will turn on if the user makes no shower selections before touching the start icon on the interface o Determine the primary outlet by clicking the radial button next to Default Only one default outlet can be selected per system Add Remove Outlets from Massage Cycling Pattern Function sets the water outlets that will cycle when the massage functions are activated o Add or remove outlets by clicking the radial button next to Massage
43. es with Part 15 of the FCC Rules Operation is subject to the following two conditions 1 This device may not cause harmful interference and 2 This device must accept any interference received including interference that may cause undesired operation Changes or modifications not expressly approved by the party responsible for compliance could void the user s authority to operate the equipment This equipment has been tested and found to comply with the limits for a Class B digital device pursuant to Part 15 of the FCC Rules These limits are designed to provide reasonable protection against harmful interference in a residential installation This equipment generates uses and can radiate radio frequency energy and if not installed and used in accordance with the instructions may cause harmful interference to radio communications However there is no guarantee that interference will not occur in a particular installation If this equipment does cause harmful interference to radio or television reception which can be determined by turning the equipment off and on the user is encouraged to try to correct the interference by one or more of the following measures Reorient or relocate the receiving antenna Increase the separation between the equipment and receiver e Connect the equipment into an outlet on a circuit different from that to which the receiver is connected e Consult the dealer or an experienced radio TV technician f
44. ettings Power On Off Interface Power System On Off The system allows the option to turn off the entire system or turn off individual features while leaving others on To turn off individual features refer to the Interface Turn Features Off section NOTE After a period of inactivity the interface will be idle and the power icon will be illuminated If the power icon is not lit verify the interface and power cables are plugged into the controller and the power supply is plugged into the electrical outlet NOTE Firm pressure may need to be applied when pressing the power icon and navigating the touch screen The interface is designed for water immunity Screen sensitivity may be less than experienced on other touch screen devices Power On Press the Power Icon or touch any part of the interface screen to turn the interface on The interface will illuminate and the home screen will appear Power Off o To turn the entire system off at once press the Power Icon All active features will stop and the interface will display the idle screen o When the entire system is powered off all features return to default settings Any features that were functioning when the system was turned off cannot be resumed 1241234 5 A 36 Kohler Co Idle Screen home 38 32 1 0 00 Pe Monday 25 July 2014 CODA shower users 2
45. flow rates calculate the total flow rate accordingly e Total with 2 2 gal min 8 3 1 min per outlet 6 6 gal min 25 l min e Maximum total with 2 5 gal min 9 5 1 min per outlet 7 5 gal min 28 4 l min Massage Options e Single e Wave Spa Compatibility e Focus calm energy 1241234 5 A 16 Kohler Co 123456 6 Port Valve Shower Configuration D Plumbing Layout 2 IMPORTANT For proper shower system setup and performance especially regarding massage and spa function refer to the Shower Configurations Overview section for important information Valves Outlets Used e Six port valve 3 Flow Rates NOTE Water flow rates are calculated below based on three used outlet ports with equal flow rates If additional valve outlets are being used or your fittings have varying flow calculate the total flow rate accordingly e Total with 2 2 gal min 8 3 1 min per outlet 13 2 gal min 50 l min e Maximum total with 2 5 gal min 9 5 1 min per outlet 15 gal min 56 8 l min Massage Options Single e Wave Spa Compatibility e Focus calm energy Kohler Co 17 1241234 5 A Water Outlet Configuration 1 Outlet 1 Primary Showerhead 2 Outlet 2 3 Outlet 3 4 Outlet 4 5 Outlet 5 6 Outlet 6 CH 12 34 56 Massage Cycling Patterns Single Wave O O O O o o o o O O O OI O
46. he controller Web pages for this function to activate Refer to the Web Settings Auto Purge section NOTE The image above shows two zones indicating that two valves are connected to the system Path shower gt start Function turns on all water outlets except handshowers to purge the cold water from the shower lines and reach the set temperature faster Factory default five minutes The auto purge function will only activate if the shower has been inactive for 30 minutes or longer n From the shower screen touch the green start icon to begin the auto purge function if enabled A shower warm up pop up will appear and enabled outlets will begin running and will continue running until the target temperature is reached or until the set duration is reached Refer to the Web Settings Auto Purge section to adjust time duration options The pop up will display the actual temperature for both zones for two connected valves Skip Auto Purge While auto purge is running the shower warm up pop up allows the user to bypass the function All outlets that were not selected before pressing start will turn OFF Outlets that were selected stay ON and will continue to rise to and maintain target temperature Touching the x at the top right of the pop up window will cancel auto purge and return to the previous screen If Target Temperature Cannot Be Reached
47. he same time example 1 23 4 6 5 outlets 2 and 3 will cycle massage pulses at the same time o Once activated deactivated press the Back Icon until you return to the settings menu 1241234 5 A 28 Kohler Co Settings Service KOHLER system users Valve 1 Valve 2 fj ji Music Lighting Steam about Interface Outlet Display Order Click and drag to rearrange within zone r Valve 1 Le Valve 2 Ole Web Settings Interface Web page path Settings gt Interface Function allows changes to the order the water outlets are displayed on the interface s NOTE To see the Interface menu on the controller Web pages a K 99693 digital interface must be installed and connected to the system controller NOTE By default the water outlets are cycled in the order displayed Changing the display order will not change the cycling order Click on the outlet icon to scroll through the available options Available options are determined by the shower fittings that are plumbed to the valve s for your system configuration Kohler Co 29 1241234 5 A Settings Service KOHLER system Users Valve 1 Valve 2 Interface ff Lighting Steam about Default Bluetooth Volume Current Bluetooth Connected Device Treble Reporting Key XXXX New Key Balance Bluetooth Passwor
48. he target steam temperature Once warm up is complete the interface beeps once the pop up window disappears and the steam duration clock begins counting down Kohler Co 61 1241234 5 A current space current space o o 296 110 target steam temperature target steam temperature e v 110 110 A X at steam duration steam duration r 14 59 14 58 Na e LA IA home ome deluge O Y A Steam Deluge Path steam gt start gt deluge Function activates 10 seconds of water flow from the default showerhead during the steam session The deluge feature can be activated at any time during a steam session Factory default 10 seconds duration cannot be adjusted NOTE To see the steam icon on the interface home screen a KOHLER steam generator must be installed and connected to the system controller and the feature must be enabled on the controller Web pages To enable the steam feature refer to the Web Settings System section NOTE The default showerhead is designated in the controller Web pages For optimal experience a rain showerhead is recommended for the deluge feature To change the default showerhead refer to the Web Settings Valve section From the home screen touch the steam icon Adjust steam target temperature and duration if desired then touch
49. hifts the color counterclockwise along the wheel The right arrow shifts the color clockwise For example if the green swatch was initially selected one touch of the left arrow will shift the color toward the yellow swatch by 5 Touch start to apply the new color 1241234 5 A 66 Kohler Co lighting 8 32am USE E ambient rain amp a Fade Speed C slow Ag T medium fast 03 brightness hue lt aw awe home amp Lighting Ambient Rain Options Path lighting gt effect gt options Function controls the brightness and fade speed of the rain panel lighting effects Factory default 100 brightness medium speed NOTE To see the lighting icon on the interface home screen the K 98741 lighted rain panel must be installed and connected to the system controller NOTE The options icon is available on both the effect tab and the color tab of the lighting screen From the home screen touch the lighting icon Touch the options icon A pop up window will appear showing a brightness bar and three fade speed options To change the brightness touch the circle to slide it along the bar Slide up to increase brightness slide down to decrease brightness To change the fade effect speed touch slow medium or fast The selected option and associated radial button will be hig
50. hlighted NOTE The fade speed also changes cycling speed of the light effect sequences Once selections are made touch the ok icon to exit the options pop up widow Kohler Co 67 1241234 5 A home music 8 32am music 8 32am 8 32 u Monday 22 July 2014 Device ID Device ID Artist 0 C 2 gt 4 Say Lem Poo Dn le Wwe Music Controls Path music gt listen Function allows adjustments to an audio signal from a device connected to the amplifier NOTE To see the music icon on the interface home screen the K 99696 amplifier must be installed and connected to the system controller To hear audio signals through the amplifier speakers must be properly connected to the amplifier Refer to the amplifier Installation and Care Guide n From the home screen touch the music icon The listen tab is displayed which contains information for any connected device and controls for playing and adjusting an audio signal If paired to a Bluetooth device the device ID name will be displayed To play music from a connected device touch the play icon While music is playing the song artist and title will display below the device ID if the streaming source provides that information To pause the audio sound touch the pause icon To begin playing again touch the play icon NOTE For a radio and line in source th
51. ice Reconnect the power supply to the controller The controller will communicate with the router to receive an IP address Upon receiving an IP address the controller will check for software updates for any connected components and will automatically download the updates Do not disconnect the power from any components during software download and installation Updates The controller will check for software updates daily around midnight and will automatically download and install if needed Software can be updated manually from the interface or the controller Web pages For manual update instructions refer to the Software Updates section 1241234 5 A 6 Kohler Co Computer or Tablet settings yoo 8 about system Controller Router Controller Hardware v0 0 0 0 Fi co CO Ethernet Cable about b gt MAC paseme 34 44 User Interface 1 OS v0 0 0 0 Graphics v0 0 0 0 Language v0 0 0 0 TouchPanel v0 0 0 OPJ OVA Interface Initial System Setup IMPORTANT To access the controller Web pages for system setup the controller and a computer or tablet must be connected to the same router System setup is configured using the controller Web pages The controller IP address i
52. interface beeps From the home screen touch the settings icon Touch the interface option Select a category to view adjust interface options as desired NOTE The back icon appears on all settings screens Touch the back icon to return to the previous screen Touch the home or back icon to exit the interface settings menu 1241234 5 A 38 Kohler Co interface 8 32am display 8 32am display 8 32am Va display auto dim Xe A O N auto return amp auto dim screen after S C start up D 10 minutes Sa A mi lt gt gt minutes clean C J 1 minute 9 beep 30 seconds NS A ff brightness e home back home back home back Interface Settings Display Path settings gt interface gt display Function adjusts the screen brightness Factory default medium brightness 50 o From the home screen touch the settings icon Touch the interface option then touch display Touch the circle to slide it along the bar Slide up to increase brightness slide down to decrease brightness Auto Dim Path settings gt interface gt display gt auto dim Function dims the screen to 50 brightness after a set duration of inactivity Factory default off From the home screen touch the settings icon o Touch the interface option then touch display n Touch the
53. k on the Settings tab The Settings tab contains menus based on components connected to the system All menu possibilities are System Users Valve 1 Valve 2 Interface Music Lighting Steam and About Click on a menu to configure various settings for that category From the Interface o From the home screen touch the settings icon The settings screen contains two menu options interface and system n Interface menu allows updates to individual interfaces o System menu controls certain system settings Some system settings can only be configured from the controller Web pages Kohler Co 19 1241234 5 A Settings Service KOHLER ji Users Valve 1 Valve 2 Interface Music Lighting Steam Abou Available Shower Configurations Date Time Configuration A 5 14 2014 12 40 P 0600 Settings Lock 1020 Daylight Saving Time O On Feature Enable of Please read owner s manual regarding possible risks associated with these features Language English Massage O Steam Units O Spa Fahrenheit O Celsius Save Current as Default Web Settings System NOTICE TO INSTALLER T WARNING Risk of personal injury Safety precautions must be followed when using shower features such as Massage and Spa Before enabling ensure the homeowner has read the associated risks listed in the guides for these fea
54. lapsed the pop up window appears with the countdown clock at zero and the interface will beep every ten seconds The beeps cease after two minutes or when the user touches ok x or the power icon Cancel the Timer o To stop the timer before the time period has expired touch the countdown clock on any screen o The pop up window will appear showing the countdown clock Touch stop to cancel the minute timer The pop up window will disappear returning the interface to the previous screen 1241234 5 A 76 Kohler Co f 69 p time reached G 08 45 101 08 45 gt T S gt CO ICQ Cm Pue Time Alarm Clock Path time clock Function sets the interface to beep at a designated time NOTE The alarm feature provides a beep trigger only It will not turn off any active features To turn features OFF refer to the Interface Turn Features Off section Set the Alarm n Touch the time clock on any screen NOTE The clock is located above the home screen icons or at the right top corner of all other screens o A pop up window will appear showing the current time o Touch the alarm option To program the alarm time touch the up arrow The time adjusts in 1 minute increments each time the arrow is touched To adjust in 5 minute increments press and hold the arrow Touch start to turn the al
55. lets Used e Six port valve zone 1 6 e Three port valve zone 2 3 Flow Rates NOTE Water flow rates are calculated below based on nine used outlet ports with egual flow rates If your fittings have varying flow rates calculate the total flow rate accordingly e Total with 2 2 gal min 8 3 1 min per outlet 19 8 gal min 75 l min e Maximum total with 2 5 gal min 9 5 l min per outlet 22 5 gal min 85 2 l min Massage Options Single e Wave Spa Compatibility e Relax Focus calm energy e Breathe 1241234 5 A 10 Kohler Co 480 O 3 6 40 83 6 Port Valve 50 05 6 Port Valve Zone 1 L Zone 2 ou sad 123456 UU Shower Configuration A Plumbing Layout 2 IMPORTANT For proper shower system setup and performance especially regarding massage and spa function refer to the Shower Configurations Overview section for important information Valves Outlets Used e Six port valve zone 1 6 e Six port valve zone 2 4 Flow Rates NOTE Water flow rates are calculated below based on 10 used outlet ports with equal flow rates If additional valve outlets are being used or your fittings have varying flow calculate the total flow rate accordingly e Total with 2 2 gal min 8 3 1 min per outlet 22 gal min 83 3 l min e Maximum total with 2 5 gal min 9 5 1 min per outlet 25 gal min 94 6 l min Massage
56. min Massage Options e Single e Wave Spa Compatibility e Relax e Focus calm energy e Breathe 1241234 5 A 14 Kohler Co 123456 6 Port Valve l Shower Configuration C Plumbing Layout 1 IMPORTANT For proper shower system setup and performance especially regarding massage and spa function refer to the Shower Configurations Overview section for important information Valves Outlets Used e Six port valve 6 Flow Rates NOTE Water flow rates are calculated below based on six used outlet ports with egual flow rates If your fittings have varying flow rates calculate the total flow rate accordingly e Total with 2 2 gal min 8 3 1 min per outlet 13 2 gal min 50 l min e Maximum total with 2 5 gal min 9 5 1 min per outlet 15 gal min 56 8 l min Massage Options e Single e Wave Spa Compatibility e Focus calm energy Kohler Co 15 1241234 5 A 21 3 Port Valve a UU Shower Configuration D Plumbing Layout 1 IMPORTANT For proper shower system setup and performance especially regarding massage and spa function refer to the Shower Configurations Overview section for important information Valves Outlets Used e Three port valve 3 Flow Rates NOTE Water flow rates are calculated below based on three used outlet ports with egual flow rates If your fittings have varying
57. ning cycle is required After 600 minutes the cleaning cycle must be completed in order to activate steam use and reset the 600 minute counter NOTICE Power clean will run for 45 minutes Once activated you must remain out of the steam area until the cleaning cycle has completed To adjust the default and maximum temperature settings click the up or down arrows to the right of the temperature field To adjust the default steam duration click the up or down arrows to the right of the time field To initiate a power clean cycle click Start Power Clean CAUTION Stay out of the steam area until the cleaning cycle is complete 1241234 5 A 32 Kohler Co Settings Service System Users Valve 1 Web Settings About Web page path Settings gt About Function displays software versions for connected system components Network Controller IP address 0 0 0 0 Gateway 0 0 0 0 MAC Address 00 14 6F 0E 10 D5 Updates section Valve 2 Software Version Interface 1 OS v0 0 0 0 Graphics v0 0 0 0 Language v0 0 0 0 TouchPanel v0 0 0 Interface 2 OS v0 0 0 0 Graphics v0 0 0 0 Language v0 0 0 0 TouchPanel v0 0 0 Interface 3 OS v0 0 0 0 Graphics v0 0 0 0 Language v0 0 0 0 TouchPanel v0 0 0 Interface Music Lighting Steam Valve 1 v0 0 Valve 2 v0 0 Controller v0 0 0 0 Steam v0 0 Amplifier v1 0 WaterTil
58. om ambient temperature If the temperature is lower then the detectable range double dashes will be displayed in place of the temperature Target steam temperature can be adjusted using the up or down arrow icons to the left and right The temperature adjusts in 1 increments within a range of 90 F 32 C and 125 F 52 C Steam duration can be adjusted using the minus or plus icons to the left and right The duration adjusts in 1 minute increments The maximum set steam duration time is 20 minutes If water is not running The temperature arrows below the screen will not be illuminated If water is running The current water temperature is displayed at the top of the screen to the left of the time display and the temperature adjustment arrows below the screen are illuminated blue and red The water temperature can be adjusted using the blue and red arrows Steam temperature must be set using the arrows to the left and right of the target stem temperature 1241234 5 A 60 Kohler Co current space TB target steam temperature r steam duration X v 110 A 10 00 38 steam warm up current space A 96 current space target steam temperature Va Vv pl r X ome steam duration a C 4 110 x HO a 9 59 deluge Steam Run Path steam gt
59. on initiates a spa experience Factory default off NOTE For the spa icon to be displayed on the interface home screen spa must be enabled on the controller Web pages To enable the spa feature refer to the Web Settings System section NOTE Spa can be initiated whether shower is on or off The spa feature will override running shower features including massage It will also override any active timers From the home screen touch the spa icon The spa menu is populated based on shower configuration Up to three spa experiences may be available depending on valve configuration To select a spa experience touch one of the available options on the spa screen Only one experience can be selected at a time n Touch start to begin the experience If water was not running a shower warm up pop up window will appear showing the current water temperature A red chevron double arrows appears next to the temperature display until the target temperature is reached To bypass shower warm up touch skip While a spa experience is running the interface screen displays several indicators e Timer the total remaining time of the spa experience is displayed at the top right corner of the screen e Countdown clock spa experiences consist of segments phases The remaining time of each segment is displayed in the middle of the screen e Target timeline under the
60. or help Industry Canada Statement This device complies with Industry Canada licence exempt RSS standard s Operation is subject to the following two conditions 1 This device may not cause interference and 2 This device must accept any interference including interference that may cause undesired operation of the device CAN ICES 3 B NMB 3 B Kohler Co 3 1241234 5 A Digital Interface Shower Settings Lights Lighted Rain Panel Required Steam Steam Generator Required H Spa Not Available On Custom Functions Power On Off System Controller 8 32 day 22 Moy 2014 a shower steam music 0 Ce T lights 0102 s lt D T O WA 1 Temperature Red 7 KOHLER S User Presets Music Amplifier Reguired Interface System Settings Decrease Water Temperature Blue Increase Water OCO Power Cord Status LED Ethernet or WiFi Adapter Not Used Digital Interface s and Optional Components Digital Mixing Valve s L Interface and Controller Anatomy 1241234 5 A Kohler Co AC Internet Power di Service 72 1 8 m Cord
61. or jumped to the countdown clock for that segment restarts the temperature adjusts to the segment targets and any associated outlets for that segment are activated deactivated Kohler Co 75 1241234 5 A home G G 101 10 00 00 59 k T D minute timer b minute timer COj JCQ shower users lh K y a A we 0 Co spa stop settings Time Minute Timer Path time display Function displays a countdown clock and sets the interface to beep after a specified duration of time Factory default ten minutes NOTE The minute timer provides a beep trigger only It will not turn off any active features To turn features OFF refer to the Interface Turn Features Off section Set the Timer Touch the time display on any screen NOTE The clock is located above the home screen icons or at the right top corner of all other screens A pop up window will appear showing the current time Touch the minute timer option To adjust the time duration touch the up or down arrow The time adjusts in 1 minute increments Seconds cannot be changed Touch start to begin the timer The pop up window will disappear returning the interface to the previous screen o While the timer is on a countdown clock appears in place of the time clock on all screens o When the specified time period has e
62. or one valve the other valve will automatically be adjusted to the same temperature setting Kohler Co 55 1241234 5 A shower shower warm up A target 101 cold target 101 ODLA shower users AON o Ce massage settings OVA OVA Shower Maximum Cold Path shower When the water temperature for a valve falls below 86 F 30 C the word cold will be displayed in place of the actual temperature NOTE Maximum cold is any temperature below 86 F 30 C Once temperature rises to 86 the temperature will be displayed in place of the cold icon If two valves are running and the temperature for one of the valves drops below maximum cold of 86 F 30 C the valve temperatures will display separately The valve that is below 86 F 30 C will display cold in place of the actual temperature The red chevron up arrows indicate that the system is trying to warm to the target temperature The valve temperature displays cold when a user attempts to set the temperature lower than 86 F 30 C 1241234 5 A 56 Kohler Co shower 8 32am C3 massage options massage options m 1 91 zone 1 wh g target 101 e off ai e snge K le M E home spad gt gt
63. or your showering configuration 1241234 5 A 8 Kohler Co Shower Configurations Overview cont Massage IMPORTANT For proper function all shower fittings on the same valve that are enabled with massage must have total equal flow rates For example if one valve outlet supplies water to two bodysprays the total flow rate of both bodysprays must equal the flow rate of a single fitting supplied by a different outlet Spa IMPORTANT For proper function for a multiple valve system valve 1 zone 1 must be connected to the system controller before valve 2 zone 2 Confirm that valve 1 appears on the contoller Web page before connecting the second valve to the controller Refer to the Web Settings Valve section For the spa icon to be displayed on the interface home screen spa must be enabled on the controller Web pages To enable the spa feature refer to the Web Settings System section Use of configurations other than the preprogrammed options will LIMIT preprogrammed spa and massage functions Kohler Co 9 1241234 5 A 32 1 3 Port Valve Zone 1 6 Port Valve Zone 2 Shower Configuration A Plumbing Layout 1 IMPORTANT For proper shower system setup and performance especially regarding massage and spa function refer to the Shower Configurations Overview section for important information Valves Out
64. ot have to save all settings preferences at one time You can touch the save as icon at any time to save current settings User presets can be saved at any time while showering or set up using the settings menu prior to showering Using User Presets To access previously set user information touch the users icon then select one of the six user presets To save user presets touch the save as icon Kohler Co 59 1241234 5 A 101 101 current space current space 8 39 5 75 target steam temperature target steam temperature COJL2 Y 110 Ce a shower users steam duration Oe D G 10 00 11 00 o a ar mJ Un J spa settings home home OVA OVA Steam Setup Path steam Function enables access to the steam feature options Default steam settings are programmed from the controller Web pages Refer to the Web Settings Steam section Factory default 110 F 43 C target temperature ten minute duration NOTE To see the steam icon on the interface home screen a KOHLER steam generator must be installed and connected to the system controller and the feature must be enabled on the controller Web pages To enable the steam feature refer to the Web Settings System section From the home screen touch the steam icon Current space ro
65. ows will lock for 30 seconds o The remaining lock time will be displayed next to a padlock icon After 30 seconds the interface keys will automatically unlock 1241234 5 A 42 Kohler Co Interface Settings Clean Lock cont Touch the home or back icon to exit the interface settings menu Kohler Co 43 1241234 5 A interface 8 32am interface 8 32am O gt S o display gt display gt NS L K A O N a gt auto return auto return amp gt lt gt lt start up gt start up gt K A X 1 G R C gt clean clean x MS P X s N C beep beep X P K D gt D gt Interface Settings Beep Path settings gt interface gt beep gt OFF LOW or HIGH Function adjusts the volume of the interface beeps Factory default OFF o From the home screen touch the settings icon Touch the interface option Touch the beep option to change the volume Touch multiple times to toggle through the volume options e Dimmed bars OFF e One illuminated bar LOW e Two illuminated bars HIGH Touch the home or back icon to exit the interface settings menu 1241234 5 A 44 Kohler Co me settings 8 32am system 8 32am G a interface about gt Ne es u a O 8 32 C wm D Monday E lt 22 July 2014 date amp time gt K e gt
66. r Start Path shower gt start Enter Shower Features From the home screen touch the shower icon The shower screen will appear with the default shower outlet highlighted selected Touch available shower outlet icons to select deselect other outlets that will turn on when water flow starts Target temperature the up down arrows will be illuminated allowing adjustment of target temperature before starting water Refer to the Shower Adjust Temperature section Turn Shower Features On NOTE If the auto purge feature is enabled a shower warm up pop up will appear when the start icon is touched Refer to the Auto Purge section On the shower screen touch the green start icon to begin water flow from selected highlighted shower outlets A red stop icon will appear indicating that water is flowing from the selected outlets Touch available shower outlet icons to turn on off other outlets at any time water is flowing n Selected shower outlet will remain ON until the stop icon is touched Temperature adjustment the up down arrows will be illuminated allowing temperature adjustment at any time water is running Refer to the Temperature Adjustment section Kohler Co 51 1241234 5 A One Valve Two Valves Zone 1 Two Valves Zone 2 shower 8 32am shower 8 32am shower 8 32am 101 101 101 K gt gt
67. s obtained from the digital interface Obtain the IP Address From the home screen on the interface touch the settings icon If an access code is required enter 1020 Select the system option then about A pop up window will display current software information for connected components If the IP address is not displayed refer to the Download Install Software section for instructions on connecting to a router o Copy the IP address from the displayed information Connect to the Controller Web Pages Connect a computer or tablet to the same router as the controller Open a browser window and enter the IP address into the search field The controller Web pages will appear in the browser providing access to configure system settings Kohler Co Y 1241234 5 A Interface Web Pages Settings Diagnostics l Updates CS Service settings G 4 update aieia O controlle j 0 interface updates gt Internet Update Internet Connected Check for Updates Manual Update Choose File File XX F Upload Software Updates NOTE The controller will check for software updates daily around midnight and will automatically download the software Software can also be updated manually from the controller Web pages From the Interface From the home screen
68. s to default lighting and effects functions for the lighted rain panel NOTE To see the Lighting menu on the controller Web pages the K 98741 lighted rain panel must be installed and connected to the system controller To change the default light fade speed click the dropdown arrow to the right of the field To change the default light color click the dropdown arrow to the right of the field To adjust the default light brightness click and drag the vertical rod along the horizontal brightness To change the default speed at which the effects move along the panel click the dropdown arrow to Kohler Co 31 1241234 5 A Settings Service KOHLER system Users Valve 1 Valve 2 Interface Music Lighting fj Default Temperature 110 Max Temperature 125 Default Time minutes 10 Power Clean Time remaining before Power Clean minutes 580 Start Power Clean Web Settings Steam Web page path Settings gt Steam Function allows adjustments to default steam temperatures and duration and indicates the number of minutes left before Power Clean must be activated NOTE To see the Steam menu on the controller Web pages a KOHLER steam generator must be installed and connected to the system controller and the feature must be enabled on the System Web page NOTICE The steam system is set to allow for 600 minutes of usage before a clea
69. start Function activates the steam feature Factory default 110 F 43 C target temperature ten minute duration NOTE To see the steam icon on the interface home screen a KOHLER steam generator must be installed and connected to the system controller and the feature must be enabled on the controller Web pages To enable the steam feature refer to the Web Settings System section Setup section From the home screen touch the steam icon If desired adjust target temperature and duration from the default settings Refer to the Steam o Touch start to begin the steam feature at the parameters designated on the screen is reached NOTE If the target temperature cannot be attained the pop up window will disappear after 20 minutes and the steam duration clock begins counting down The red chevron will remain indicating that the target temperature is not reached o The steam duration time can be adjusted at any time during the countdown using the minus and plus icons to the left and right o To bypass steam warm up touch skip The steam feature will begin and the red chevron double arrows will appear next to the current space temperature until the target temperature is reached A steam warm up pop up window will appear showing the current steam temperature A red chevron double arrows appears next to the temperature display until t
70. target bar temperatures shown in the middle are targets for the current spa segment Temperatures at the left are targets for the previous segment and to the right are targets for the next segment 1241234 5 A 72 Kohler Co Spa Start cont To end a spa experience before the time duration is reached touch the stop icon All water will be turned off Kohler Co 73 1241234 5 A spa 09 59 spa 08 34 target ______ target ______ _ sor 105 107 L lt 102 102 90 gt D e D e home home IN Spa Adjust Script Path spa gt choose experience gt start Function allows alterations to pre programmed spa scripts temperature and segment duration NOTE For the spa icon to be displayed on the interface home screen spa must be enabled on the controller Web pages To enable the spa feature refer to the Web Settings System section NOTE Spa can be initiated whether shower is ON or OFF The spa feature will override running shower features including massage It will also override any active timers Adjust Spa Temperature While a spa experience is running the interface screen displays target temperature information for previous current and next spa segments The current target temperature is displayed in the middle The temperature can be adjusted any time during th
71. the start icon NOTE The deluge icon will not appear until the steam function is activated Touch the deluge icon to turn on water flow to the default showerhead n If water was not running the deluge water will rise to the default water temperature If water was running the deluge water temperature will be the same as set temperature for the other active shower fixtures on the same valve The deluge feature will run for 10 seconds The blue and red temperature arrows are illuminated allowing adjustment of the water temperature 1241234 5 A 62 Kohler Co O gt NA power clean power clean power clean You have O sessions Stay out of shower Stay out of shower remaining before needing Power clean initiating in Power clean is running to run power clean Run now Steam Power Clean Path steam gt power clean Function activates an automatic cleaning function for proper safe maintenance of the steam generator Factory default required after 600 minutes NOTE To see the steam icon on the interface home screen a KOHLER steam generator must be installed and connected to the system controller and the feature must be enabled on the controller Web pages To enable the steam feature refer to the Web Settings System section NOTICE The steam system is set to allow for 600 minutes
72. ttings Default and Maximum Temperature eee 25 Web Settings Auto Purge 0 T E RE R RR RR ee 26 Web Settings IMassage 1 32 eng sau sioku a don KTN ee dv bee don aj i k ko hee eee k k dod eee R E 27 Web Settings Interface eee ee 29 Web Settings Music lt ee 30 Web Settings Lighting ee 31 Web Settings Steam lt ee 32 Web Settings About lt ee ee 34 Web Service Diagnostics lt lt lt eee ee 34 Web Service Updates lt sms 444 Bil bee D a eee e a A Eg StS a ee ee eee By 35 Interface Power System On Off lt ee 36 Interface Turn Features Off ee 37 Interface Settings Overview ee es 38 Interface Settings Display lt lt lt lt eee eee 39 Interface Settings Auto Return ee 40 Interface Settings Start Up ee ee 41 Interface Settings Clean Lock eee eee 42 Interface Settings Beep 1 ee 44 System Settings Overview scanu a aman bi aea D a e a eee 45 System Settings About u sacs ii a 5 5 R R R ia a a ee 46 System Settings Update sir ooria sa maniis goaa ee 47 System Settings Date amp Time ee 48 System Settings Temperature Unit ee ee 49 System Settings Language sse ss sapertos pasai d eee 50 SHOWS Stall Get E O Anat eons wah ae oar O GN a eet T 51 Shower Valve Zones 2 RE 9 RR e a Gee n ua a ee ieee ee AA 52 Shower Auto Purge 1 0 ee 53 Shower Adjust Temperature
73. tures Pre Programmed Shower Configurations NOTE Pre programmed shower configurations are outlined in the Configurations sections If components are installed for pre programmed shower configurations the components can be automatically populated on the Web pages o Shower configurations are available based on the number of valves connected to the controller o To populate pre programmed configurations select the appropriate dropdown option in the Available Shower Configurations field The shower components will appear in the outlet options on the valve menus If equipped shower features such as Massage and Spa must be enabled in order to function Safety instructions for each feature must be read by the homeowner before it is enabled Refer to the guide for each feature Custom Shower Configurations NOTE Spa features and certain massage features will not be available on custom configurations For custom system configurations select the Custom dropdown option in the Available Shower Configurations field 1241234 5 A 20 Kohler Co Web Settings System cont To check or configure custom valve settings go to the Valve 1 or Valve 2 menus Refer to the Web Settings Valve section Kohler Co 21 1241234 5 A Settings Service KOHLER system i Valve 1 vave 2 Interface Music Lighting Steam about User Moll
74. xit the system settings menu Kohler Co 49 1241234 5 A system 8 32am O gt about Nu A C gt update gt gt e O ON date amp time gt E e O gt units F N A O a language gt X A home back System Settings Language Path settings gt system gt language Function selects the interface display language Factory default English From the home screen touch the settings icon Touch the system option language D home English 8 32am back Touch the home or back icon to exit the language menu Touch the desired language The radial button to the left of the selected language will illuminate NOTE Currently English is the only interface language available Future software updates will provide additional language options NOTE Language selection on one interface will automatically apply to any other connected interfaces but will not apply to the system controller Web pages To change the language of the system controller Web pages refer to the Web Settings System section 1241234 5 A 50 Kohler Co shower 8 32am shower target temperature A o 101 ele coe 8 l 32 target 101 Monday 25 July 2014 COP CQ o 8 jm aa e v settings home massage massage OVA OVA Showe
75. y User John User User 3 Rename Rename Rename Clear User Clear User Clear User User User 4 User User 5 User User 6 Rename Rename Rename Clear User Clear User Web Settings Users Web page path Settings gt Users Function enter user names to appear on the interface s NOTE User names can only be entered through the controller Web page The names will appear on the interface but name updates are not available through the interface Enter each user name in the available fields The names will appear on the interface in the order in which they were entered on the Web page To clear a user and any saved presets from the system click the Clear User button for that specified user o For configuring and saving user presets refer to the Users Setting Preferences section 1241234 5 A 22 Kohler Co Settings Service KOHLER System Users ff Valve 2 Interface Music Lighting Steam About Outlet 2 Outlet 3 O Default Default O Default Massage y Massage Massage Auto Purge Auto Purge Auto Purge Outlet 4 O Default O Default O Default Massage O Massage O Massage Auto Purge O Auto Purge O Auto Purge Temperature Custom Massage Order example 1 3 2 4 6 5 Default Temperature 100 O Max Temperature 113 Cold Water 5 Minutes Custom Massage Ord
76. y default is 102 F 39 C To change the temperature unit display to Fahrenheit or Celsius go to the System menu Maximum Temperature In the Max Temperature box enter the desired maximum temperature limit up to 120 F 49 C The factory default is 115 F 46 C To change the temperature unit display to Fahrenheit or Celsius go to the System menu Kohler Co 25 1241234 5 A Outlet 1 Outlet 4 Temperature Default Temperature Max Temperature Cold Water Auto Purge Settings Service System Users Valve 1 L O Default Massage Default Massage Auto Purge 100 A v A v 113 Valve 2 Outlet 2 p 1 tes 7 Seconds Web Settings Auto Purge Web page path Settings gt Valve 1 or Valve 2 KOHLER Interface Music Lighting Steam About Outlet 3 Default O Default Massage Massage Auto Purge Auto Purge Outlet 6 O Default O Default O Massage O Massage O Auto Purge O Auto Purge Custom Massage Order example 1 3 2 4 6 5 O Custom Massage Order O The auto purge function is defaulted to 5 Minutes This function turns on all water outlets except any handshowers to purge the cold water from the shower lines and reach the set temperature faster Once the auto purge has run for the set

User Guide

Contents

Download Pdf Manuals

Related Search

Related Contents