Home

Autonomy Process Automation Process Studio 7.3 User Guide

Contents

1. Cancel 7 Select the Purchase Order form in the TutorialForms folder and click OK 8 Click the Assignment tab Process Studio User Guide 219 220 Chapter 14 Process Studio Tutorial SCH Form Copy 9 General Form Copy Assignment Attributes Simulation User or Work Queue Performer of Another Task Relationship None Assignment Priority Normal ze 9 Click Process Originator 10 Click OK Related Topics m Form Copy Task on page 77 m Configure Tasks on page 91 m Configure General Properties on page 92 m Configure a Form Copy Task on page 114 m Task Assignment on page 95 m Search the APA Server on page 132 Configure the E mail Task using Substitution Syntax The e mail task sends an e mail to the process originator to notify them that the purchase order has been rejected Substitution syntax is used in the e mail message so that regardless of the identity of the process originator the message is sent to the correct address Substitution syntax also allows you to display values from the submitted form in the e mail message Use the following procedure to configure the e mail task Process Studio User Guide Configure the Rejected Path To configure the E mail task 1 Process Studio User Guide Double click the Email task to edit its properties The properties dialog box opens General Email Attributes
2. 1 Accounting WO Review 8 Fj Choose Path Based On Default Path the default path can be changed dynamically from script Delete Move Up Expression Field TOTAL lt 10000 Another Task Form Fill and Submit 1 Select an optional alternate path if the chosen path does not exist Edit Mapping The Expression Builder dialog box opens Expression Builder Expression In the Choose Path Based On area click Expression and then click Edit HOG GIs ategories Process Data Functions Operators Tasks In the Categories list click the Process Data gt Fields folder Process Studio User Guide Define the Approved Path Using an Expression The fields associated with the Purchase Order form are displayed in the Items list 9 Inthe Items list double click Total Field TOTAL is added to the Expression box 10 In the Categories list click the Operators gt Comparison folder 11 In the Items list double click is less than lt The operator is added to the Expression box 12 In the Expression box place the cursor after less than character lt and type 10000 13 Click Check The Expression Builder verifies whether the expression is valid The message Syntax is valid is displayed Expression Builder Expression Field TOTAL lt 10000 il Syntax is valid opon 2080
3. NOTE The processes that you can select might be l restricted by permission settings Process Studio User Guide Configure Task specific Properties 4 5 Click one of the following options to select how the process template data is shared between the parent process and the sub process O Embed Sub process Instance in Main Process The parent process and sub process share the same data set Data changes made in either process are automatically reflected in the other process The main process must wait for the sub process to complete In the Management Console the tasks in the sub process are displayed as if the sub process were a container task O Launch Sub process Instance as New Top level Process The sub process is launched as a new process on the APA server In the Management Console there is no way to view the tasks in the sub process from the main process The sub process is displayed as a separate process running on the APA server Initialize Sub process Instance with Main Process Data Select this check box to initialize the sub process with attributes from the parent process Any attribute changes made in either process after the sub process is initiated are not reflected in the other process Wait for Sub process Instance to Complete Select this check box to mark the sub process task as complete only when the sub process has finished Otherwise the sub process task is marked as complete as soon as the
4. Publish As Untitled Attachment Location FileSystem D M Enabled O Exclusive modification rights M Available through Web Desktop Folders C Offline save HTML O Available through Friendly URL URL ID Untitled Description Keywords N To configure the General Properties for the published process 1 Navigate to the location on the APA server where you want to save the published process To create a new folder delete a folder or rename a folder use the toolbar buttons Process Studio User Guide Publishing Wizard General Properties 2 icon Description al Create a subfolder in the selected folder g Delete the selected folder vi Rename the selected folder In the Publish As box type a name for the published process O If you use the same name as an existing process in the same folder that process is overwritten O The process name can not exceed 128 characters IMPORTANT Processes can be published over existing forms or processes When a process is published over a form all permissions routing settings and export settings are removed This ensures that if another form is published over the process the new form does not inherit these settings from the original form 3 4 Process Studio User Guide In the Attachment Location list click a location to define where attachments are stored O If you select FileSystem the attachments are stored in Serv
5. Search the APA Server on page 132 Disconnect from the APA Server on page 132 Disconnect from the APA Server 132 To disconnect from the APA Server use one of the following commands To disconnect from the APA Server On the Tools menu click Disconnect Click Disconnect o Related Topics Connect to the APA Server on page 131 Search the APA Server When configuring tasks or publishing a process you might need to search the APA server The Search feature enables you search for published forms and processes APA users groups for APA servers integrated with LDAP work queues relationships Process Studio User Guide Search the APA Server NOTE You must be logged on to the APA server before you a can search See Connect to the APA Server on page 131 d NOTE The folders and files that you can search are restricted by the permissions configured by your APA Administrator TIP lf you are searching the APA server for a published QO form or process you can also browse the folders on the server See Browse Folders on the APA Server on page 134 To search the APA server use the following procedure To search the APA server I 2 Process Studio User Guide In the Search for box type a search term for example Expense_Report NOTE You can use the asterisk character as a D wildcard For example type to search for everything Lag
6. Storage Type Name Envelope Body BusinessProspectResponse Busine Attribute Attribute1 Edit Delete C Store Entire XML Response as Attribute The result of the expressions in the XPath Expression column load into the process attribute or field specified in the Name column To create a new expression click New To modify an existing expression click Edit The Xpath Builder dialog box opens 111 112 Chapter 7 Configure Tasks XPath Builder Response Schema Invocation Response E IBusinessProspectResult BusinessProspectResult se DunsNumber DunsNumber fm BusinessName BusinessName ITradeStyle TradeStyle StreetAddress StreetAddress e ICityName CityName e StateOrProvinceName StateOrProvinceName e CountryName CountryName ZinOrPostalCode ZinOrPostalCode w ba Expression ctResponse BusinessProspectResult BusinessName XPath Evaluation Results Storage Type Attribute Field Name The Response Schema tab displays a tree of the XML response as described in the WSDL The Invocation Response tab displays a tree of the last XML response from an earlier invocation The Xpath Expression box displays the XPath Expression This text area is automatically populated by selecting a node in the tree Xpath Query Language is supported for selectively choosing the values from the SOAP response The Xpath Evaluation Results box displays the results of the Xp
7. cancel task choices other than this one for Task choice predecessor getSuccessors if choice getId thisTask getId choice cancel Interleaved Parallel Routing The Interleaved parallel routing pattern executes several tasks The order in which the tasks are executed is specified at run time when the process is executed a i g9 3 Task 3 j KS In this example Task 1 is responsible for determining the order in which its successor tasks are executed The enteringAct ive Callback for Task 1 might use the following code get successor tasks List successors thisTask getSuccessors Task successorl successors get 0 Task successor2 successors get 1 Task successor3 successors get 2 set dependencies based on some runtime knowledge successor2 addPredecessor successorl1 successor3 addPredecessor successor2 If the total order of execution may not be known when the first successor is ready to start the following method may be used The enteringAct ive Callback for task 1 would determine the first successor remove the predecessor relationship from it allowing it to become active and add a predecessor relationship on it from the other successor tasks As it determines the order for each other successor it repeats the process removing the predecessor relationship and Process Studio User Guide 167 168 Chapter 11 Task Patterns Milestone adding predecesso
8. Click Print 49 50 Chapter 3 Create and Save a Process Related Topics m Save a Process as an Image on page 49 Close a Process To close the current process template use the Close command To close a process template 1 On the File menu click Close 2 If the process has not been saved a dialog box opens Click Yes to save the changes and close the process template Click No to close without saving the changes Click Cancel to keep the process template open Related Topics m Create a New Process on page 46 m Open a Process on page 46 m Save a Process on page 48 Process Studio User Guide CHAPTER 4 Configure a Process A process is a connected set of process tasks that are designed to achieve a specific goal This section describes how to configure a process m Configure Process Properties m Form Packets m Form Packet Rules Configure Process Properties Process Properties describe a process and define its behavior Process Properties can be modified for either a template or an instance If you change the properties of an instance the changes do not affect the process template To set up process template properties 1 Open the process properties dialog box D On the Edit menu click Process Properties O Press ALT SHIFT ENTER O Right click a blank area of the Graphical View and click Process Properties 2 Modify the properties as required Proces
9. Mobile Inbox Option The Mobile Inbox Option provides APA users who are granted the right to approve forms and processes the ability to approve using a Blackberry mobile device These users are provided with access to a secure APA Inbox within the Blackberry user interface Case Management Option Autonomy Case Management ACM provides comprehensive tools to build sophisticated nested dynamic rules allowing end to end automation to occur with predetermined compliance and full transparency Process Studio User Guide CHAPTER 2 P rocess Studio Interface and Commands A Process is a set of tasks that are connected together in order to achieve a specific goal Process Studio provides a graphical user interface for you to create processes and publish them to the APA Server This section provides an overview of the Process Studio user interface and the commands that are available for designing processes Process Studio User Guide Process Studio User Interface Customize Process Studio Process Studio Commands Build Expressions Create Dynamic Values Using Substitution Syntax Create Custom Scripts 25 26 Chapter 2 Process Studio Interface and Commands Process Studio User Interface Yacation_Request Autonomy Process Automation Studio File Edit Run View Tools Help 0 UHS A DP SS RK d Templates Instances ai Yacation_Request i Form 1 7 Form Copy 2 Control Utility
10. NS NOTE The format of the value 0 00 00 00 000 is DAY HOUR MINUTE SECOND MILLISECOND Process Studio User Guide 103 104 Chapter 7 Configure Tasks 3 Select the Use business calendar check box to use business time as defined by the business calendar Clear the check box to specify a value as an absolute time For more information about the Business Calendar see Use Business Calendar on page 117 To specify an alternate delay value for use in Process Simulations select the Use Alternate Delay in Simulation check box and type or select a shorter delay value for example a few seconds Configure an Escalate Task The Escalate task provides a solution for handling tasks that have not competed within a certain period of time To configure an Escalate task 1 2 Open the Escalate Task Properties dialog box and click the Escalate tab In the Delay until escalation box type or select the amount of time that should pass before the Escalate task is used SS NOTE The format of the value 0 00 00 00 000 is DAY HOUR MINUTE SECOND MILLISECOND Select the Use Business Calendar check box to interpret the delay value using the business calendar rather than as an absolute value For more information about the Business Calendar see Use Business Calendar on page 117 To specify an alternate delay value for use in Process Simulations select the Use Alternate Delay in Simulation check box and type or
11. Click OK The selected roles are added to the Permissions page The Permissions area shows the permissions for the role user or group selected in the Role Group User names list and is used to change the permissions ass Process Studio User Guide igned to those users 143 144 Chapter 10 Publish a Process Users can be assigned a combination of the following permissions Access Retrieve Data Manage Process View All Process Data Allows users to open a form or initiate a process By default the Everyone role is assigned this permission If the Access permission is granted to Anonymous users all other users groups and roles inherit this permission Allows users to retrieve data through the My Data Client Refer to the My Data Client User Guide for more information To retrieve data through My Data Client a user must also be assigned the My Data role By default the Process Publisher is assigned this permission Allows users to manage the process in the Activities section of the Management Console To manage the process a user must also be assigned the Process Administrator role By default the Everyone role is assigned this permission Allows users to open a form associated with a process and view the current form data To make use of this permission a user must also be assigned the Process Administrator role By default the Everyone role is assigned this permission ra NOTE The on
12. Configure Tasks for Load Simulation on page 127 Configure Simulation Properties for Branch Tasks To configure the simulation properties for branch tasks use the following procedure Process Studio User Guide Load Simulation To configure simulation properties for Branch Tasks 1 2 3 Double click the Branch Task to open the properties dialog box Click the Simulation tab To define the probability of each Branch Path being taken double click each cell in the Probability column and type a percentage The total of the values entered in the Probability column must equal 100 Click OK equal 100 the value of the last Branch path is adjusted to h IMPORTANT If the total of the Probability values do not make the total 100 Related Topics Create and Run Configure Tasks for Load Simulation on page 127 a Load Simulation Before creating a load simulation verify that each task has been configured for sim ulation See Configure Tasks for Load Simulation on page 127 5 NOTE Sub process tasks are ignored by load simulation y The Invoke in Simulation feature for sub processes is supported only in flow simulations not load simulations To create a load simulation iP Process Studio User Guide On the Run menu click Create Load Simulation The Configure Simulation dialog box opens In the Delay Between Instantiations area type or select a Mean average value
13. Contact Autonomy Documentation Updates Process Studio User Guide The information in this document is current as of Process Studio version 7 3 The content was last modified 01 May 2012 You can retrieve the most current product documentation from Autonomy s Knowledge Base on the Customer Support Site A document in the Knowledge Base displays a version number in its name such as IDOL Server 7 5 Administration Guide The version number applies to the product that the document describes The document may also have a revision number in its name such as DOL Server 7 5 Administration Guide Revision 6 The revision number applies to the document and indicates that there were revisions to the document since its original release It is recommended that you periodically check the Knowledge Base for revisions to documents for the products your enterprise is using 13 14 About This Document To access Autonomy documentation 1 Go to the Autonomy Customer Support site at https customers autonomy com Click Login Enter the login credentials that were given to you and then click Submit The Knowledge Base Search page opens In the Search box type a search term or phrase To browse the Knowledge Base using a navigation tree only leave the Search box empty Ensure the Documentation check box is selected Click Search Documents that match the query display in a results list To refine the results list select one o
14. ategories Process Data Process Attributes E Fields Ge i Sticky Fields is less than or equal to lt Process Properties is greater than gt Functions is greater than or equal to gt Operators Arithmetic Logical Tasks exprl lt expr 14 Click OK to save the expression The Expression is displayed in the branch task properties dialog box 15 Click OK to close the branch task properties dialog box Process Studio User Guide 216 Chapter 14 Process Studio Tutorial 16 Save the process Related Topics m Build Expressions on page 32 m Configure Tasks on page 91 m Configure General Properties on page 92 m Configure a Branch Task on page 100 Configure the Rejected Path If the supervisor rejects the Purchase Order form the first branch task task id 3 executes the Container Task The Container task is a container that is used to group other tasks In the Purchase Order process the container task holds a sequence of tasks that send a copy of the rejected form to the process originator and send an e mail stating that the form was rejected This section of the tutorial describes how to m Configure the Container Task Configure the Form Copy Task m Configure the E mail Task using Substitution Syntax Configure the Container Task Use this procedure to m configure the general properties of the container task m open the container task
15. ceihtad ancien ele a eee 210 ele te Ch CET 210 Define the Approved Path Using an Expression 00 cceeeeeeeeeeeeeeeeenaeeeeeeeeeeeaaaeeeeeeeeeeenaaaeees 212 Configure the second Branch Task ccccccececeeeeeeeeeeeeaeeeeeeaaeeeeeeaaaeeeseaaaeeeseaaaeeeeeneeeteeaes 212 Configure the Rejected Path cccccccesceceeeeneeeeeeeeeeeeeeaeeeeeeaaeeeecaaaeeecaaaeesecaeeeseeaeeseeneeesteas 216 Configure the Container Task ccccceccseseceeeeeneeeeeeeeeeeeccaeeeseaaeeeseceaeeesecaeeeseeceeesenneeeeeenaes 216 Configure the Formi Copy Task eccceeteceeiscsectenicnestesnecceiiadenedesaiaeeetsanet visas Reege DEES 218 Configure the E mail Task using Substitution Syntax ccccceeeeeeeeeeeeeeeeeeeeeeeeeeseneeeeetenees 220 Configure the CFO Review Task ccccccccceeeeeceeeeeeeeeeeeeeeeeeeeeeeeeeeeaaeeeeeeeaeeeeesaeeeeesaaeeeeiaaeees 223 Configure the CFO Review Form Task cccccceecceeeeeeceeeeeeecneeeeeeceeeeeeceeeeeeeaeeeeeeneeeneennes 223 Configure the Accounting Work Queue Review Task ssssssssssesssirrssssisssrirssssrnrsrrrnsssrrnnsrrnnt 227 Configure the Accounting WQ Review Form Task cccccecceeeeeeeeeeeeeeeeeeeeeeeceeeeeseneeeeeeeeees 228 Configure the CFO Review Branch Task c ccccccceceeeeneeeeeeeeeeeeeaaeeeceaaaeeeeeaaeeeseaaeeeeeeeeenees 232 Process Studio User Guide 11 12 Contents Add and Connect the CFO Review Branch Task s ssssssssssssssrrrsssrssssrrrnsernnsssrr
16. ze Allow viewing of Progress Map Display Page for Entering Subject and Notes A i C Represent Static Table Cells as Top Level Fields 5 Click Search The Search Forms dialog box is displayed 228 Process Studio User Guide Configure the Accounting Work Queue Review Task 6 Process Studio User Guide Search Forms Search For f in Everywhere Location EE Cee 1 Public 2 dl Reports 3 TutorialForms Cancel Select the Purchase Order form in the TutorialForms folder and click OK Select the following check boxes Allow Form to be Edited Allow Attachments to be Deleted Allow Viewing of Progress Map Display Page for Entering Subject and Notes DD DD D Automatically Display Next Form on Submit Select the Set Field Properties check box and click Edit The Edit Fields dialog box opens The list of fields is built dynamically by the APA server Edit Fields Field ID Re Re Hid Namespace Storage Name AcctWOQSignature AcctW QSignature Button2 Button2 CFOSignature cFOSignature DEPT DEPT Properties DESC1 DESC1 J Required DESC10 DESC10 DESC11 DESC11 C Read only DESC12 DESC12 DESC2 DESC2 Hidden DESCH DESCH DESCH DESCH DESCH DESCH DESC6 DESC6 DESC DESC COOC SISISISISISIISISISIIST CEO 229 Chapter 14 Process Studio Tutorial 10 11 12 13 14 Set all
17. IMPORTANT The resources defined in a load simulation are assigned to the entire duration of each task For example you have a process with one resource User_1 A and two tasks Task_A with a duration of 24 hours and Task_B with a duration of 5 minutes If Task_A is selected to be completed first 24 hours are required before User_1 is released to complete Task_B 4 Click the Simulation tab 5 Move the Standard Deviation slider to change the Standard Deviation Standard deviation is a statistic used to measure the variation in a distribution The standard deviation simulates the fact that sometimes tasks are completed more quickly or slowly than the estimate The changes you make using the slider are reflected in the Standard Deviation box where you can also type or select a value and on the chart 6 Click OK Related Topics Configure Simulation Properties for Loop Tasks on page 128 Configure Simulation Properties for Branch Tasks on page 128 Configure Simulation Properties for Loop Tasks To configure the simulation properties for loop tasks use the following procedure To configure simulation properties for Loop Tasks 1 2 3 4 Double click the Loop Task to open the properties dialog box Click the Simulation tab Define the probability of the loop being executed by typing or selecting a value in the box The value must be a percentage between 1 100 Click OK Related Topics
18. O Click Yes to save the process template and exit Process Studio O Click No to exit Process Studio without saving O Click Cancel to keep Process Studio open If there are multiple unsaved process templates a dialog box opens that lists the unsaved process templates You can choose which templates you want to save O Click Select All to save all the unsaved process templates or Deselect All to discard them Click OK to confirm your selection O Alternatively select or clear the check boxes in the Save column to save or discard specific process templates Click OK to confirm your selection O Click Cancel to keep the application open and not save the selected process templates 3 If you have chosen to save one or more processes that have not been saved before the Save dialog box opens See Save As on page 48 Build Expressions The Expression Builder is a powerful tool that is available in APA Form Designer and APA Process Studio In Process Studio the Expression Builder can be used to create expressions that control the behavior of Branch and Loop tasks The Expression Builder is opened from the task Properties dialog box see Configure a Branch Task on page 100 and Configure a Loop Task on page 102 In many cases the Expression Builder can save you from writing custom scripts To use the Expression Builder you must understand the APA Expression Language See APA Expression Language on page 171 Proc
19. Configure Tasks Task Assignment Configure Task specific Properties Task Properties Configure Tasks Each task has associated properties that define its behavior These properties vary based on the selected task Templates or Instances Changes made in an Instance do K TIP Task Properties can be modified in either Process not affect the Process Template To view or configure Task Properties 1 Process Studio User Guide To view or configure task properties O Select the task On the Edit menu click Task Properties O Select the task and press ALT ENTER O Double click the task except container tasks 91 Chapter 7 Configure Tasks O Right click the task and click Task Properties The Task Properties dialog box opens 2 View or configure the properties on the following tabs if applicable to the selected task General General properties identify a task within the process estimate its duration and enable or disable script Comments can also be added to the task for future reference See Configure General Properties on page 92 Assignment Some tasks must be assigned to users See Task Assignment on page 95 and Configure Task Assignment on page 97 Attributes To assign attributes to a task see Configure Attributes on page 94 Simulation Process Studio includes features for simulating how a process might behave when placed under load Before you can run a load
20. Customize Submit Action List Process Studio allows you to customize the Submit Action list of the forms associated with Form and Form Packet tasks For more information about submit actions refer to the Form Designer User Guide To customize a Submit Action List 1 Click Edit The Submit Action dialog box opens 2 To add a custom submit action click Add A new submit action is added to the list a Inthe Type column click a submit action type For information about default submit actions see Default Submit Actions on page 119 b Inthe Display Name column type the text you want to display to the user Press ENTER to save your changes Process Studio User Guide Task Properties c In the Value column type an output value for the submit action Press ENTER to save your changes NOTE The value assigned to custom submit actions can be used with a Branch task to control which branch Lad is selected or with a loop task to control whether the loop continues 3 To remove a custom submit action select it and click Delete 4 Click OK Default Submit Actions Submit action Description Submit Submits the form to the APA Server and if applicable the next user or group working with the form The task is marked as complete and the next task in the process is executed Reject The task is marked as complete and the next task in the process is executed Transfer Transfers the form to ano
21. The APA Expression language includes a range of operators Grouping Operator You can use parentheses to group parts of an expression The grouping operator overrides the built in precedence rules to affect the order of evaluation in an expression See the operator descriptions in this section for more information about precedence rules Logical Operators Process Studio User Guide All logical operators evaluate to Boolean values 177 178 Chapter 12 APA Expression Language Operator Description not Evaluates to true only if its operand is false not has the highest precedence of the logical operators Takes a single Boolean operand The operand is implicitly converted to a boolean as if by a call to boolean NOT associates with the operand to its right and Evaluates to t rue only if both of its operands are true Takes two Boolean operands The operands are implicitly converted to Boolean values as if by a call to boolean or Evaluates to t rue if either of its operands are true or has the lowest precedence of the logical operators Takes two Boolean operands The operands are implicitly converted to Boolean values as if by a call to boolean Arithmetic Operators The Expression Language uses the following arithmetic operators Multiplicative Operators The multiplicative operators are Operator Description multiply divide m The multiplicative operators have higher precedence than th
22. oa fF w Test the process Process Studio includes features that can be used to test a process before it is deployed to the APA server See Load Simulation on page 127 7 Connect to the APA Server See Connect to the APA Server on page 131 Publish the process Publishing includes saving the process to the APA server and defining permissions for the process See Publish a Process on page 137 Process Studio Tutorial For a detailed guide that describes how to create a process using Process Studio see Process Studio Tutorial on page 185 Create a New Process When Process Studio starts a new blank process is created To create another new process use one of the following commands To start a new blank process template m On the File menu click New m Click New L m Press CTRL N Related Topics m Configure Process Properties on page 51 m Add a Task on page 81 m Open a Process on page 46 m Save a Process on page 48 Open a Process To open an existing process template use the Open command Process Studio User Guide Retrieve a Process from the APA Server To open an existing process template 1 To open an existing process template D On the File menu click Open O Click Open E S D Press CTRL 0 The Open dialog box opens Navigate to and click the process template that you want to open Click Open Rel E ated Topics Create a Ne
23. sum For example you might need to sum multiple fields and place the result in another field Rather than typing each field name you can use and as wildcard characters in field references m asterisk Matches zero or more characters Example ExtPrice_ matches all fields whose names begin with ExtPrice_ m question mark Matches exactly one character Example Item matches Item1 Item2 but not Item or Item34 Process Studio User Guide Expression Language Operators Multiple Wildcard Characters Wildcard characters can be used multiple times in a field reference for example Price is a valid field reference that would select all fields in which Price appears in their name If multiple characters appear next to each other they are treated as if there were only a single character for example Ext Price would select the same fields as Ext Price Publish During publishing wildcard references are replaced automatically with a list of fields Delete Fields You can rename or delete a field that is referenced in an expression using a wildcard character When the form is published the field is ignored For Example A form contains three fields Fl1d1 Fld2 amp F1d3 The expression sum Fld expands to sum Fld1 Fld2 F1d3 lf Fld2 is deleted and F1d3 is renamed to Total the expression expands to sum Fld1 Expression Language Operators
24. 141 predecessor task 70 print process template 49 process fields 54 process originator 95 process properties attributes 53 general properties 52 overview 51 process fields 54 process simulation see simulation Process Studio customize 28 process template add comments 89 close 50 create 46 layout tasks 31 open 46 overview 27 print 49 publish 135 retrieve from APA server 47 save 48 save as image 49 save copy 48 process tree 26 publish process overview 135 permissions 141 process settings 145 Process Studio User Guide R redo 31 relationship 95 S save as image 49 save composite task 87 save process template 48 scoped ID property 93 script task 77 scripts default scripting language 28 insert function 40 insert task reference 40 script editor 37 search APA Server 132 servers APA 23 simulation configure tasks 127 create flow simulation 123 create load simulation 129 delete instance 124 duplicate instance 124 flow simulation 123 flow simulation commands 125 load simulation 127 overview 123 task states 125 sticky note task 80 string concatenation 180 string data type 173 sub process task 72 submit action list 118 substitution syntax 34 successor task 70 7 task library customize 28 overview 26 Process Studio User Guide task patterns 151 task states 125 task types and 72 branch 74 command 78 committee 79 composite 79 container 72 delay 75 e mail 78 escalate 75
25. 181 String String Functions on page 182 Numeric Numeric Functions on page 183 Expression Language Data Types The data types supported by the Expression Language are E String m Number m Date m Time m Boolean 172 Process Studio User Guide Expression Language Data Types The data type constructors described below take the format lt function name gt lt argument types gt String Data Type Represents a sequence of Unicode characters Description string number Argument is converted as follows E NaN not a number is converted to Nah E Positive 0 and Negative 0 are converted to 0 E Positive Infinity is converted to Infinity Negative Infinity is converted to Infinity E Integers are represented in base 10 form with no decimal point and no leading zeros preceded by a minus sign if the number is negative E Floating point numbers are represented in base 10 form with a decimal point with at least one digit before the decimal and at least one digit after the decimal Preceded by a minus sign if the number is negative There must be no leading zeros unless the leading zero is the only digit before the decimal point There must be only as many digits after the decimal as are required to uniquely distinguish the number from all other IEEE 754 numeric values string date Returns the argument formatted as CCYY MM DD string time Returns the argument formatted as HH MM SS 24
26. Edits 4 General Loop Attributes Simulation Default Value Follow Path Based On Default value or Script Expression Edit Another Task Form Fill and Submit 1 Edit Mapping 6 Click True to set the Default Value to True 7 Click OK 8 Save the process 0 4 Needs Edits EE O Process Studio User Guide 211 212 Chapter 14 Process Studio Tutorial Related Topics m Loop Task on page 74 m Connect a Loop Task on page 85 m Configure Tasks on page 91 m Configure General Properties on page 92 m Configure a Loop Task on page 102 Define the Approved Path Using an Expression If the supervisor approves the form submitted by the process originator the first branch task selects path 1 and the second branch task is executed The second Branch task is used to route the form If the total value of the purchase order specified by the Total field onthe Purchase Order form is 10 000 or greater the form is sent to the Chief Financial Officer CFO for approval If the total value is less than 10 000 the approval of the CFO is not required The form is routed directly to the Tutorial_Accounting Work Queue for approval The Branch task needs to be configured to select a path using an expression Expressions return a value of 0 zero if they evaluate to False or 1 one if they evaluate to true The branch path pointi
27. Email Process Originator 2 Double click the new Form Copy task to edit its properties Form Copy 15 General Form Copy Assignment Attributes Simulation Name Form Copy Supervisor Duration 0 00 00 01 000 Scoped ID 15 Design Comments Sends a copy of the rejected form to the Supervisor C Enable Script Edit Enable Script in Simulation C Cae 3 Inthe Name box type Form Copy Supervisor The duration of the task is set to 1 second by default As the task is automated do not change the duration 4 Inthe Design Comments box type the following text Sends a copy of the rejected form to the Supervisor 5 Click the Form Copy tab Process Studio User Guide 241 Chapter 14 Process Studio Tutorial Form Copy 15 General Form Copy Assignment Attributes Simulation Select Form TutorialForms Purchase_Order Inbox Options Ma gd Progress Mapi C Represent Static Table Cells as Top Level Fields 6 Click Search The Search Forms dialog box opens Search Forms Search for in Everywhere 7 Location EE f x Coene SSN 1 Public 2 dl Reports 3 i TutorialForms Cancel 7 Click the Purchase Order form in the TutorialForms folder and click OK Select the Allow Viewing of Progress Map check box Click the Assignment tab 242 Process Studio User Guide Configure the Rejected2 Containe
28. For information about the Expression Language see APA Expression Language on page 171 The path is selected based on the submit action chosen when a form is submitted See Use Another Task to Determine Path Selection on page 101 4 Type or select a number in the Select an optional alternate path if the chosen path does not exist box If the value returned is greater than the highest branch index the alternate path is used This might occur with processes originally created prior to version 5 0 of APA Use Another Task to Determine Path Selection A branch task can be configured to select a process path based on the submit action chosen when a form is submitted Before you can set up a Branch task to execute based on Another Task you must configure the Form task that precedes the Branch task You must also make sure there are tasks available in your process toward which you plan to point your Branch paths To set up Another Task on a Branch Task 1 2 Process Studio User Guide In the Choose Path Based On area click Another task In the Another Task list click a Form Task The Branch Path is chosen based on the submit action selected when this form is submitted Click Edit Mapping The Branch Mapping dialog box opens To add a condition to map a task output to a branch path click New A new condition is added to the list 101 Chapter 7 Configure Tasks a Inthe Task Output cell click a task out
29. Forms Other Graphical view XML View Form Form Copy Form Export Patterns lt A The Process Tree displays open process templates and instances and their associated tasks See Templates and Instances on page 27 To view an open process template or instance double click its name 4 Click 1 to collapse or expand the Process Tree O The Templates tab displays open process templates Root level nodes represent open processes and display the process title O The Instances tab displays instances that have been created in Process Studio B The Task Library contains tasks that can be added to the process The Task Library is divided into drawers For information about tasks see Tasks Overview on page 69 Click to collapse or expand the Task Library Process Studio User Guide Process Studio User Interface C View Options Graphical View displays a graphical representation of the selected process See Graphical View on page 27 XML View displays the XML code that defines the process See XML View on page 27 Templates and Instances When you design a process in Process Studio you are creating a process template that can be used to create an instance An instance is a copy of a template that can be executed Instances can be created in Process Studio for testing purposes or after a process has been published executed on the APA Server You can create more than on
30. Guide Process Studio User Guide 77 78 Chapter 5 Tasks Overview Command Task The Command task executes an executable file Substitution syntax can be used to make the command or its arguments dynamic See Create Dynamic Values Using Substitution Syntax on page 34 Message Task The Message task sends a message to a user s APA Inbox The message can be in the form of either a link URL or text The process does not wait for a response from the user to continue Substitution syntax can be used to make the message dynamic See Create Dynamic Values Using Substitution Syntax on page 34 E mail Task The E mail task is used to send an e mail message Substitution syntax can be used to make the message dynamic See Create Dynamic Values Using Substitution Syntax on page 34 Manual Task The Manual task represents a manual step in a process It can be used to include a task that is not capable of automation and is outside the scope of APA for example printing a document and delivering it by hand to an individual or department When you include a Manual task in a process the assigned user is notified of the task by a message in their APA Inbox This message can include a web link or text based instructions IMPORTANT Manual tasks do not complete until the assigned user marks the task as complete If you choose to send instructions to the assigned user s APA Inbox the user is given an option to
31. ID used by each individual server A single process definition can be published to multiple servers and used successfully if each server has common work queue names as used in the process definition Work queue references are converted from name to internal numeric ID on a specific server when a process definition is published Process Studio User Guide Publish a Process Publish a Process To publish a process use the following procedure To publish a process to the APA Server 1 2 Connect to the APA server See Connect to the APA Server on page 131 On the File menu click Publish Process If any of your tasks are missing required fields a dialog box opens describing the problem The publishing process is aborted Click OK fix the fields on the applicable tasks and then try to publish again The Publishing Wizard dialog box opens and the General Properties page is displayed Continue with Publishing Wizard General Properties on page 138 Related Topics Process Studio User Guide Publish to Multiple Servers on page 136 Publishing Wizard General Properties on page 138 137 Chapter 10 Publish a Process Publishing Wizard General Properties The first page of the Publishing Wizard is used to configure the General Properties of the process K Publishing Wizard P General Properties Gruic gag Public s C Reports Testing TutorialForms Settings
32. O To insert a new branch click New A new condition is added to the Branch Paths table In the Task column click a task to assign to the branch e NOTE It is possible to set up a Branch Path that does not have an assigned Task If this path is executed the P Branch task transitions to Done and all Branch targets become passive D To remove a branch click the branch you want to remove and click Delete This causes the index numbers to change so that they remain zero based and contiguous O To change the order of branches click the branch you want to move and click Move Up or Move Down The default branch remains the same as before the move operation O To define a default path select the relevant check box in the Default column 3 In the Choose Path Based On area click one of the options to choose how the branch task should choose its successor task Process Studio User Guide Configure Task specific Properties Default Path Expression Another Task The default path is selected The path is selected based on an expression Click Edit to open the Expression Builder E f the expression evaluates to false the branch path O is followed E f the expression evaluates to true the branch path 1 is followed E f the expression evaluates to a number the branch path assigned that number is followed For more information about the Expression builder see Build Expressions on page 32
33. Save As command To save a process template to a new file 1 On the File menu click Save As The Save dialog box opens Navigate to the location where you want to save the file Type a File Name If the Use File Name as Process Title check box is selected the File Name is used as the Process Title 4 Click Save The process template is saved to the selected location Related Topics m Create a New Process on page 46 m Open a Process on page 46 Process Studio User Guide Save a Process as an Image Save a Process as an Image on page 49 Save a Process as an Image To create an image file containing a visual representation of the process template use the Save As Image command To save a process template as an image 1 On the File menu click Save As Image The Save dialog box opens Browse to the location where you want to save the file In the File Name box type a name for the image Click Save The image file is saved to the selected location Rel E ated Topics Save a Process on page 48 Print a Process on page 49 Print a Process To print the process template use the Print command To print a process template 1 Process Studio User Guide Click the print command D On the File menu click Print D Click Print D Press CTRL P The Print dialog box opens If required set the print range number of copies and change the printer properties
34. Studio User Guide 17 About This Document Autonomy Customer Support Autonomy Customer Support provides prompt and accurate support to help you quickly and effectively resolve any issue you may encounter while using Autonomy products Support services include access to the Customer Support Site CSS for online answers expertise based service by Autonomy support engineers and software maintenance to ensure you have the most up to date technology To access the Customer Support Site go to https customers autonomy com The Customer Support Site includes m Knowledge Base The CSS contains an extensive library of end user documentation FAQs and technical articles that is easy to navigate and search m Case Center The Case Center is a central location to create monitor and manage all your cases that are open with technical support Download Center Products and product updates can be downloaded and requested from the Download Center m Resource Center Other helpful resources appropriate for your product To contact Autonomy Customer Support by e mail or phone go to http www autonomy com content Services Support index en html Contact Autonomy For general information about Autonomy contact one of the following locations Europe and Worldwide North and South America E mail autonomy autonomy com E mail autonomy autonomy com Telephone 44 0 1223 448 000 Telephone 1 415 243 9955 Fax 44 0 1223 448 00
35. The path index for the Container task has a value of 2 The Branch task should choose a path based on the submit action chosen by the CFO In the Choose Path Based On area click Another Task In the Another Task list click the CFO Review task Click Edit Mapping The Branch Mapping dialog box opens Branch Mapping Task Output Branch Path 0 OfNeeds Edits 4 1fAccounting WO Review 8 1 2 Process Studio User Guide Configure the Accounting Review Branch Task Click New three times to add new branch mapping entries to the list Configure the Task Output and Branch Path settings by double clicking each cell in the table and clicking a task output or branch paths from the list O Task Output 0 should map to Branch Path 0 the Needs Edits loop D Task Output 1 should map to Branch Path 1 the Accounting WO Review task O Task Output 2 should map to Branch Path 2 the Rejected2 container 9 Click OK 10 Click OK again 11 Save the process Related Topics m Configure Tasks on page 91 m Configure a Branch Task on page 100 Configure the Accounting Review Branch Task A branch task is used following the Accounting WQ Review task to select the process path based on the result of the review If the form is approved by the Accounting Work Queue the Approved container task is executed If the form is rejected the Rejected2 container task executes If the form is submitted fo
36. a process to P CAUTION Itis possible to call sub processes in a recursive go into an endless loop and never finish And Task The And task is used where two or more paths in a process converge The And task requires all of its predecessor tasks to be completed before the successor task can start If multiple tasks are connected to a single successor task the presence of an And task is implied it is default behavior that a task does not start until all of its predecessors are complete An And task can also be used to reduce the number of connections required to connect multiple tasks to multiple successors Process Studio User Guide Process Control Tasks Or Task The Or task is used where two or more paths in a process converge The Or task requires at least one of the predecessor tasks to be complete before the successor task can start When the Or task allows the successor task to proceed m Any predecessor tasks that are not actively executing are cancelled m Predecessor tasks are active can either be cancelled or allowed to complete To configure this behavior see Configure an OR Task on page 99 If active predecessor tasks are cancelled and this causes an item to be removed from a user s APA Inbox the item is replaced with a message indicating that it was withdrawn Process Studio User Guide 73 74 Chapter 5 Tasks Overview Branch Task Loop Task The Branch task is used to make a
37. confirm the task is complete APA does not provide a user interface to complete a Manual Task that sends a Web Link The task must be completed through the APA Process API or SOAP API If you send a web link to a custom web application the custom application can complete the task using the API This requires the application to identify the task This can be done by passing extra information such as the task ID as URL parameters in the web link Process Studio User Guide Other Tasks Web Service Task The Web Service task is essentially a web service client This task can be used to create a SOAP request by reading a WSDL file sending the SOAP request to the server and displaying the web service response back to the user Substitution syntax is supported in the request string See Create Dynamic Values Using Substitution Syntax on page 34 The Web Service task is not displayed in the Task Library until Process Studio has successfully connected to an APA Server that supports the premium workflow option Committee Task The Committee task allows a user to submit a form to be reviewed by committee of approvers Criteria can be established for the task to be approved All approvers must approve All members of the committee must approve the form before the task is considered approved Minimum number to approve A minimum number of members must approve the form before the task is considered approved The number of appro
38. decision The Branch task executes one task from a number of successor tasks The chosen path can be determined by providing a default path writing script or writing an expression When a branch task follows a form task the path can also be determined by the submit action chosen on submission of the form If you configure a branch task to choose a path using an expression the following conditions apply m lf the expression evaluates to false the branch path 0 is followed m lf the expression evaluates to true the branch path 1 is followed m If the expression evaluates to a number the branch path assigned that number is followed The default path of a Branch task is used in the following scenarios m The Branch task is configured to use the Default Path The default path can be changed dynamically using script m The Branch task is configured to use an Expression to choose the successor task but the expression fails m The Branch task is configured to use Another Task to choose the successor task but the task fails TIP To go back to a previous task in the process use the Loop task The Loop task is used to return the process to an earlier task Loop Tasks require a condition that controls whether the loop should continue or terminate If the condition evaluates to true the loop continues If the condition evaluates to false the loop terminates The condition can be a default value an expression or
39. document and delivering it by hand to an individual or department APA supports automated tasks that require human or machine resources to support process execution Where a human resource is required a task is assigned to a process participant see Task Assignment on page 95 Automated tasks are generally synchronous tasks Process Studio User Guide Tasks Overview You can have both manual and automated tasks within a process To include a manual task in a process use the Manual task type Manual tasks can be included in a process definition but do not form part of the resulting process Manual tasks are asynchronous tasks Synchronous and Asynchronous Tasks There are two types of tasks in the APA Process Model Synchronous and Asynchronous A process can contain both types Synchronous tasks are automated tasks that represent the execution of code When the execution of code is complete a synchronous task automatically transitions into a Done state see Task states on page 125 Synchronous tasks can invoke other systems locally or remotely or interact with databases There is no time limit for the execution of a synchronous task but they are usually very short lived because their execution time is only as long as it takes to execute the task s code lf a task will take an indefinite amount of time as when human intervention is needed or when an external system is invoked asynchronously the task is an asynch
40. drawers to the Task Library and define what tasks appear in each drawer To customize the Task Library 1 On the Tools menu click Options Process Studio User Guide Process Studio Commands The Options dialog box opens 2 Click the Gallery tab The drawers in the Task Library are displayed in the Drawers list All of the Tasks that are available in Process Studio are displayed in Tasks and Other lists 3 Customize the Task Library D D D To add a task to a drawer drag it from the Tasks list onto one of the folders To create a new drawer click New Drawer To delete an existing drawer click the drawer you want like to delete and click Delete To rename a drawer click the drawer to select it Wait a couple of seconds and click it again Type the new name and press ENTER The drawer is renamed Tasks cannot be renamed Click Restore Defaults to return to the default settings for the entire Options dialog box The settings on the General tab also revert to default 4 Click OK Customize the Toolbar You can choose whether to show or hide the toolbar and adjust the size of buttons on the toolbar To show or hide the Toolbar m On the View menu click Show Toolbar To change the size of toolbar buttons 1 On the Tools menu click Options The Options dialog box opens 2 Click either Small or Large icon size 3 Click OK Process Studio Commands This section describes the commands that are
41. exception 76 form 77 form copy 77 form export 77 form packet 77 gate 75 loop 74 manual 78 message 78 or 73 script 77 sticky note 80 sub process 72 web service 79 tasks add to process 81 assignment 95 change type 88 configuration 91 connect 83 delete 88 duration 93 manual and automated 70 overview 69 predecessor and successor 70 scoped ID 93 template see process template test process see simulation 247 248 Index time datatype 174 tooltips 28 U undo 31 use business calendar 117 user interface overview 26 V views graphical 27 xml 27 WwW web service task 79 wildcard references 176 work queue 95 X xml view 27 Z zoom controls 30 Process Studio User Guide
42. form specific formatting When a form task is completed form field values are reformatted to store process field values in the format described When process field values are used only in conjunction with APA Servers the user designing the process does not need to be concerned about the storage format of process fields However the user does need to be aware of the internal formatting in the following cases Getting process field values from script always returns the value in the internal format To set the value for a process field in script the value must conform to the internal format based on the data type of the process field If a process is initiated with initial values for process fields by sending extra parameters on the URL or using SOAP or Virtual Submit the initial values must conform to the internal format If specifying values for process fields in the setprocessTaskDone SOAP call the values must conform to the internal format The internal format is used when substituting process field values in for task parameters see Create Dynamic Values Using Substitution Syntax on page 34 The APA Server automatically determines the data type for any process field that corresponds to a form field of a form included in the process Process Studio User Guide If the field exists on only one form included in the process the data type for that form field is used as the data type for the process field If the field exist
43. forms Data can be retrieved from the APA server in a number of formats These formats are compatible with applications such as Microsoft Excel and Microsoft Access Management Console The Management Console provides a graphical user interface for administrators to manage the APA server Optional Components The following components might also be included with your Autonomy Process Automation solution Process Studio User Guide 23 24 Chapter 1 Introduction 5 NOTE Many of these items are sold separately and might y not be included with your version of APA Contact your APA administrator for more information Public Access Option The Public Access Option provides access to APA for public users who do not have accounts on the APA Server Email Routing Option The Email Routing Option allows APA users and Anonymous users to route forms to e mail addresses Offline Forms Option The Offline Forms Option allows users to save forms offline that is locally on a hard drive This is useful when they would like to save a form perhaps already partially filled out complete it offline and then load the form while online for submission to the APA Server Enterprise Access Option The Enterprise Access Option allows users who do not need to approve forms and processes such as non managerial employees to use APA These users can initiate forms and processes and are provided with log on credentials and user profiles in APA
44. from the Process Template To change the type of a task 1 Select the Task you want to change 2 On the Edit menu click Change Type The Change Type dialog box opens In the New Type list click a new type 4 Click OK Related Topics m Add a Task on page 81 m Delete a Task on page 88 Add a Comment to a Process Comments can be added to a Process using the Sticky Note task Comments can be helpful if the Process needs to be modified in the future To add a Sticky Note to a process template 1 Inthe Task Library click the Other drawer 2 Drag the Sticky Note task from the Task Library onto the Graphical View A note is added to the Process Template Click the sticky note to select it 4 Wait a few seconds and then click the note again You can now edit the text contained in the note Type text in the note When you have finished click an empty part of the Graphical View Change the Color of a Sticky Note To change the color of a sticky note use the following procedure Process Studio User Guide 89 90 Chapter 6 Add and Connect Tasks To set the color of the Sticky Note 1 Double click the Sticky Note The Note Color dialog box opens Select a color O Inthe Swatches tab click a color O Alternatively click the HSB tab or RGB tab and define a custom color Click OK Process Studio User Guide CHAPTER 7 Configure Tasks This section describes how to configure tasks
45. hour string boolean Returns t rue ifthe argument is true false otherwise Number Data Type Represents an integer or decimal number Numeric literals have an optional sign or followed by 0 or more digits followed by an optional decimal point and 1 or more digits For example 1 02 Incorrectly formatted numeric literals are treated at evaluation time as NaN nota number Process Studio User Guide 173 174 Chapter 12 APA Expression Language number string number date number time number boolean Date Data Type Description The argument is interpreted according to the rules for numeric literals Returns the number of days since 1 1 1970 Returns the number of seconds since midnight Returns 1 if argument is true 0 otherwise Represents a specific day in history date string date number date time date boolean Time Data Type Description Argument must be in the form CCYY MM DD If the argument is not formatted correctly returns date 0 The integral portion of the argument is interpreted as specifying a number of days before or after 1 1 1970 Returns date 0 Returns date 1 if argumentis true otherwise returns date 0 Represents a point in time during a single day time string time number time date time boolean Description Argument must be in the form HH MM SS HH number of hours 24 hour clock MM number of minutes SS num
46. initiated Complete the form or click Close Window Process Studio User Guide Initiate a Process Other Methods t o Initiate a Process You can also use the following methods to initiate a process Process Studio User Guide URL link A URL link for example in an e mail message can be used Click the link to initiate the process If a process is initiated by a URL link additional parameters can be specified in the URL to initialize the corresponding fields in the new process A sample URL link might look like this http myserver lfserver myFriendlyURL field_namel valuel field_name2 value2 Virtual Submit Virtual Submit can be used to initiate a process The DEG FormGuID parameter must refer to a process definition GUID as generated at publish time The values of data fields in the Virtual Submit XML document are used to preset values for process attributes Virtual Submit is only used to initiate a process It does not complete any tasks in the process Refer to the Management Console online help for additional information about Virtual Submit SOAP The SOAP call get FormData can also be used to initiate a process The formGUID parameter must refer to a process definition GUID as generated at publish time The xm1Data parameter may optionally be used to preset values for attributes Refer to the APA Programming Guide for more information POST When using POST to initiate a pro
47. m add tasks inside the container task To configure the container task 1 Right click the container task and click Task Properties The container task properties dialog box is displayed Sn NOTE Double clicking a Container task does not show y the task properties Instead the contents of the container are displayed Process Studio User Guide Configure the Rejected Path Rejected 6 E General Attributes Name Rejected Duration Scoped ID 6 Design Comments This task is executed if the supervisor rejects the form C Enable Script Edit Enable Script in Simulation 2 Inthe Name box type Rejected1 TIP The Duration of a Container task is set automatically The duration is set to the greatest value of Q E the total durations linked tasks E the longest Duration of a non linked tasks 3 Inthe Design Comments box type the following text This task is executed if the supervisor rejects the form Click OK Double click the Rejected1 Container task The process template now looks blank This is because you are viewing the empty container Add a Form Copy task and an Email task to the template Connect the tasks as shown in the following diagram E o Fom Copy Related Topics m Add a Task on page 81 Process Studio User Guide 217 Chapter 14 Process Studio Tutorial m Connect Tasks on page 83 m Container Task on p
48. name pattern List ids pm getProcessesByNamePattern childOfParent wait until all children are done boolean done false while done done true for Long id ids if pm getProcessBylId id longValue getState equals State DONE done false break Process Studio User Guide 165 Chapter 11 Task Patterns if done Thread sleep 250 Multiple Instances without a Priori Runtime Knowledge 2 2 Ek Bel This pattern is similar to Multiple Instances with a priori runtime knowledge It creates multiple instances of a sub process However it assumes the required number of instances is not known before the first instances are created In this pattern the loop condition must be configured so that the loop does not terminate until all of the required instances have been created Deferred Choice The Deferred Choice pattern is similar to the Exclusive Choice pattern Only one of the successor tasks of Task 1 is executed However the choice is not made using a Branch task Instead when one of the successor tasks executes the other tasks are withdrawn A deferred choice can be implemented by cancelling all other task choices when a user acquires the task For example each task choice could have the following code in its enteringActive callback get predecessor task 166 Process Studio User Guide Task Patterns Task predecessor thisTask getPredecessors get 0
49. removeProcessInstance API Thread work new Thread public void run ProcessManager pm EngineFactory getDefaultEngine getProcessManager pm removeProcessInstance thisProcess getId be work start Process Studio User Guide CHAPTER 12 APA Expression Language This section describes the APA Expression Language For information on the style conventions used in the descriptions of the APA Expression Language see Command line Syntax Conventions on page 18 m Supported Functions and Operators m Expression Language Data Types m Field References m Literal Values m Wildcard References m Expression Language Operators m Expression Language Functions Process Studio User Guide 171 Chapter 12 APA Expression Language Supported Functions and Operators Table 1 Supported operators in APA Expression Language Operator Category Description Grouping Operator Grouping Operator on page 177 Logical Operators Logical Operators on page 177 Arithmetic Operators Arithmetic Operators on page 178 Comparison Operators Comparison Operators on page 179 Selection Operator Selection Operator on page 180 String Concatenation String Concatenation Operator Operator on page 180 Table 2 Supported functions in APA Expression Language Function Category Description Boolean Boolean Functions on page 181 Date Date Functions on page 181 Time Time Functions on page
50. result and search again click Find Next To replace the text and search again click Replace Find Next To replace every occurrence of the Search String click Replace All To close the Find Replace dialog box click Close Insert a Function into a Script To insert a function into a script use the following procedure To insert a function into a script 1 Click Insert Function The Insert Function dialog box opens In the list click the function you want to insert Click OK TIP You can also insert a function by double clicking the Q function name in the Script Editor navigation tree If the function already exists the cursor moves to the location of the existing function Insert a Task Reference into a Script To insert a task reference into a script use the following procedure To insert a task reference into a script 1 In the Script Editor place the cursor in the script where you would like to place a reference to a task Click Task Reference The Select Task dialog box opens Process Studio User Guide Create Custom Scripts 3 4 Process Studio User Guide Type an appropriate Attribute Name in the Attribute Name box The default Attribute Name is the name of the task Click OK An attribute is created on the task or process that contains the Scoped ID of the selected task A string is inserted at the current cursor position within the script that uses the attribute value to retriev
51. returns the start date of the task with a scoped ID of 456 SField fieldName Retrieves the value of the specified process field as a string Returns an empty string if the field does not exist or has an empty value Field firstname gets the value of the firstname field STaskField scopedid fieldName Retrieves the value of the specified task field as a string The scopedid parameter must refer to a scoped task identifier on the current process template Returns an empty string if the scoped identifier is invalid or if the field does not exist or has an empty value S TaskField 123 lastname returns the value of the lastname field on a task with a scoped ID of 123 Process Studio User Guide Create Custom Scripts Additional Information A substitution sequence can be escaped by using the backslash character Parameters used in the substitution syntax are not quoted When a literal character precedes a pattern ALPHA where ALPHA can be any one or more alphabetic characters the E character must be escaped by a preceding V character For example the string Price is listed in USD current would be treated as the string Price is listed in USD current When a character appears outside of a substitution sequence no escaping is necessary For example the string The price is 4 would be treated as a literal string and would not be substituted The escape character c
52. select a shorter delay value for example a few seconds Configure a Script Task The Script task is used to run Server Side script To configure the Script task 1 Open the Script Properties dialog box and click the Script tab 2 Select the Wait for Notification check box if you want the task to wait until an external application notifies APA before the script task transitions to the Done state The task can be set to the Done state programmatically through the Process API Refer to the APA Programming Guide for additional information Process Studio User Guide Configure Task specific Properties If the Wait for Notification box is cleared the task is marked complete as soon as the script method returns Configure a Command Task The Command task executes an executable file To configure a command task 1 Open the Command Task Properties dialog box and click the Command tab Click File The Select dialog box opens Browse to the file you want to execute Click the file and then click Select XN NOTE The file must be available to the APA Server when the process is running Configure any parameters For example if you have selected ACME_ReportGenerator exe as the executable command a parameter could be the directory in which the report is saved C ReportGenerator OutputDirectory O To define a new parameter click New O To modify the parameter selected in the Parameters table click E
53. sensitive distinguish between uppercase and lowercase text 27 28 Chapter 2 Process Studio Interface and Commands Tooltips O Select the Use Regular Expression check box if you want to provide a regular expression instead of a literal search string Further explanation of this syntax is available here http java sun com j2se 1 5 0 docs api java util regex Pattern html 4 Click Find Next If the Search String is found in the XML the text is highlighted in the XML View 5 Click Find Next repeatedly to continue searching or click Close to cancel the search Tooltips are displayed when you hover the mouse pointer over a task in a template or instance The Design Comments Duration and Class properties are displayed in the tooltip Customize Process Studio The Process Studio interface can be customized to make designing processes faster Customize the Default Scripting Language Process Studio includes a Script Editor that enables you to write custom script for use in your processes For information about using the Script Editor see Create Custom Scripts on page 37 The default scripting language is the language that the Script Editor uses by default for new scripts To set the default scripting language 1 On the Tools menu click Options The Options dialog box opens 2 Inthe Default Scripting Language list click the language you want to use Click OK Customize the Task Library You can add new
54. simulation some tasks must be configured See Configure Tasks for Load Simulation on page 127 For more information about process simulations see Simulate a Process on page 123 These properties are the same for all types of tasks 3 Configure task specific properties See Configure Task specific Properties on page 98 4 Click OK Related Topics m Add a Task on page 81 m Connect Tasks on page 83 Configure General Properties General properties identify a task within the process estimate its duration and enable or disable script Comments can also be added to the task for future reference Process Studio User Guide Configure Tasks Name The Name property specifies a name for the task Maximum 50 characters alpha numeric dash underscore and spaces To rename a task m Inthe Name box type a name for the task Duration The Duration property is an estimate of the time required to complete the task The value is formatted as DAY HOUR MINUTE SECOND MILLISECOND The Duration property is used for process simulation After a process is published to the APA Server you can analyze the process to see how the estimated duration compares to the actual time taken for the task to complete For more information refer to the Management Console User Guide NOTE The Duration of a Container task is set automatically using the durations of the ta
55. sub process is initiated Configure the simulation options O Select the Invoke in Simulation check box to execute the sub process in Flow Simulation Mode If the Invoke in Simulation check box is selected you must select a process template from the Process Template list The process template must be open in Process Studio Configure an OR Task The OR task is a process control task that requires at least one of its predecessor tasks to be complete before its successor task can start To configure an Or Task 1 2 Process Studio User Guide Open the OR Properties dialog box and click the OR tab Select or clear the Cancel unfinished predecessors as soon as any predecessor is done check box If this check box is selected the process continues once any predecessor task is complete All other predecessor tasks are cancelled If this check box is cleared the process continues once any predecessor is complete However all predecessor tasks that are not complete remain active 99 100 Chapter 7 Configure Tasks Configure a Branch Task The Branch task is used to make a decision The Branch task executes one task from a number of successor tasks To configure a Branch task 1 Open the Branch Task Properties dialog box and click the Branch tab 2 The Branch Paths area is used to define the branches If the branch task has been connected to successor tasks branches already exist and are displayed in the list
56. subfolders for the operators defined by the Expression Language See APA Expression Language on page 171 O Tasks Contains subfolders for each task on the current process template You can insert task attributes and properties into your expressions by double clicking the relevant item in the Items list For more information about defining task properties and attributes see Configure Tasks on page 91 For more information about Task Properties refer to the APA Programming Guide Items list Displays the expression elements for the folder selected in the Categories list Double click an element to insert it into the expression at the current insertion point The effect is the same as if you had typed the element into the expression box Description area The Description area is located below the Categories and Items lists Descriptive text is displayed for the item selected in the Items list Create Dynamic Values Using Substitution Syntax Substitution syntax enables the creation of dynamic values When Process Studio reads Substitution Syntax it replaces it with a real value from the process Substitution Syntax can be typed in all of the following locations E mail task properties Manual task properties Web Link and Instructions Message task properties Web Link and Text Command task properties the command itself and every element of the argument list Web Service task properties in the request string Proces
57. synchronize the sub processes the task following the And task does not execute until all of the sub processes are complete d 3 a Process Studio User Guide Task Patterns Multiple Instances with a Priori Runtime Knowledge This pattern creates multiple instances of a sub process It is used when the required number of instances is not known until the process is executed but before the instances are created A loop is used to create the required number of instances The loop enteringActive callback is used to increment a counter long count Number thisTask getAttribute count intValue thisTask setAttribute count new Long count thisTask setDefaultValue count lt 3 The activity to follow the synchronization is modeled as a task with a dependency on the loop task From its enteringActive callback the synchronization task queries the engine for the child workflow instances created by the Sub process If all child instances have not already completed the synchronization task waits a while and then tries again until all children have completed If efficiency is a concern the synchronization task could register a workflow event listener for each child instance and be notified when each completes get the process manager ProcessManager pm EngineFactory getDefaultEngine getProcessManager find all child processes created by the sub process assumes they have a similar
58. task has aborted due to an error for example a form has been moved disabled or deleted from the APA server or a script error e o has occurred Passive The passive state applies to all tasks that are not required for completion of the process This includes any task following a branch or multi branch task that is not taken This also LC includes any task preceding an OR task that has not completed after one of the other preceding tasks has completed Task states in published processes The state of tasks in a published process instance can be determined using the Activities gt Processes command in the Management Console or by viewing the Progress Map in the Portal or Web Desktop Assigning and Reassigning Tasks Process tasks can only be assigned to a user assigned the Process role or to the originator of the process If a task is activated but has not been assigned or is assigned to an invalid user the task is left in the active state and is marked as unassigned The task is not aborted Process administrators can use the Activities section of the Management Console to search for processes that have unassigned form tasks and reassign those tasks Flow Simulation Commands In a flow simulation manual input is required to change the state of some tasks To simulate the completion of a task set the Active tasks to Done Successor tasks are then allowed to execute Process Studio User Guide 125 126 Chapte
59. the Set Node State consequence 1 Inthe left pane click the node that you want to change state and click gt You can select multiple nodes 2 Inthe Change state to list click one of the following options 63 Process Studio User Guide Chapter 4 Configure a Process Visited Node has been visited on this task This is set automatically when an unvisited form is displayed Unvisited Node has not been visited This is the default state Inactive The node is not active Error An error exists on the node Hidden Node is not displayed The state that you choose will apply to all of the nodes displayed in the right pane 3 Click OK Related Topics m Create a Rule on page 61 Configure the Set Message in TOC Consequence The Set Message in TOC consequence adds a message to the table of contents of a form packet This message is displayed when the table of contents is viewed in Portal or Web Desktop Set Message in TOC Cardholder Information Decision Summary e Credit Report Information o eme gt Message 4 decision has been made about your application To configure the message 1 Inthe left pane select the nodes in the table of contents that should display the message and click gt 64 Process Studio User Guide Form Packet Rules 2 Inthe Message box type the message that you want to display 3 Click OK Related Topics m Create a Rule on page 61 Co
60. the result of another task The default value can be changed dynamically using script Loops can be nested and interleaved A loop must be connected to a target task The target task is the first task inside the loop The loop body consists of the target task and its successor tasks until the loop or a task downstream from the loop is reached The loop does not evaluate until all tasks within the loop body have completed or cancelled Process Studio User Guide Process Control Tasks Gate Task The Gate task is used to prevent execution of successor tasks based on an arbitrary condition When the gate is opened the successor tasks can execute Gate tasks in process instances initiated on the APA Server can only be opened programmatically Once open the gate cannot be closed unless it is part of a Loop body To test a Gate task in Process Studio run the process in Flow Simulation Mode right click the task and click Open Gate Ki NOTE Gates can be opened at any time They are not required to be active Delay Task The Delay task delays the execution of the process For example you have a Script task that calls an archive program but you do not want the Script to run until after midnight when the system backup occurs You can include a Delay in the process prior to the execution of the Script task that restricts the Script task from executing until after midnight Delay tasks can be configured to use the business
61. values for your branch task do not match those in the preceding image select a row in the Branch Paths table and click Move Up or Move Down Ensure the 0 path index points to the Loop task the 1 path index points to the second Branch task and the 2 path index points to the Container task The path index values are important because the branch paths are configured to execute based on the submit action selected in the Supervisor Review task In the Choose Path Based On area click Another Task In the Another Task list click Supervisor Review Click Edit Mapping The Branch Mapping dialog box opens This dialog box is used to define the relationship between the output of the Supervisor Review task and the branch paths Process Studio User Guide Add a Branch Task and Successor Tasks Branch Mapping Task Output Branch Path 0 OfLoop 4 1 1 Branch 5 7 Click New three times to add new branch mapping entries to the list 8 Configure the Task Output and Branch Path settings as shown in the preceding diagram Double click a table cell to edit a value 9 Click OK 10 Click OK again 11 Save the process The process should look similar to the following diagram Related Topics m Configure a Branch Task on page 100 Process Studio User Guide 209 210 Chapter 14 Process Studio Tutorial Configure the Loop Task This section of the tutorial describes how to Configu
62. 1 Fax 1 415 243 9984 Autonomy Corporation plc Autonomy Inc Cambridge Business Park One Market Plaza Cowley Rd Spear Tower Suite 1900 Cambridge CB4 OWZ San Francisco CA 94105 United Kingdom USA Process Studio User Guide Pant1 Getting Started This section introduces Autonomy Process Automation APA and describes how to navigate the APA Process Studio user interface m Introduction m Process Studio Interface and Commands 20 Part 1 Getting Started Process Studio User Guide CHAPTER 1 Introduction This section introduces Autonomy Process Automation APA and describes how APA Process Studio is used in process automation m Autonomy Process Automation m Autonomy Process Automation Components Autonomy Process Automation Autonomy Process Automation APA is a powerful web based solution for creating routing and managing electronic forms APA is the fastest way for organizations to put forms online and automate business processes APA automatically routes forms to the appropriate person or department and notifies managers by e mail when digital approvals are needed This results in efficient and secure processing of enterprise information APA can fully automate the processes of complex business environments and is the only business process management solution that offers enterprise class search Use Industry Standards Process Studio User Guide APA uses industry standard formats such a
63. 99 04 01 Process Studio User Guide Expression Language Functions Numeric Functions Function number sum number avg number min number max number count non empty string string number number number number number number number number number floor number N boolean is number string number ceiling number N number round number N Process Studio User Guide Description Returns the sum of the arguments Can take wildcard field references Returns the average of the arguments Can take wildcard field references Returns the minimum of the arguments Can take wildcard field references Returns the maximum of the arguments Can take wildcard field references Returns the number of non empty fields Can take wildcard field references Returns the largest closest to positive infinity integer that is not greater than N Returns t rue if datacontains a valid number If string is empty the function returns false Returns the smallest closest to negative infinity integer that is not less than N Returns the integer that is closest to N If there are two such numbers then the one that is closest to positive infinity is returned If N is NaN then NaN is returned If N is positive infinity then positive infinity is returned If N is negative infinity then negative infinity is returned If N is positive zero then positive zero is returned If Ni
64. Aa Ea a 40 Insert a Task Reference into a Script eccceceeecceeeeeceeeeeeeeeeeeeeeneeeeeeeaaeeeeeeaaeeesseaeeeeneaaeees 40 Part 2 Create and Deploy Processes Chapter 3 Create and Save a Process ccsiiciissiersetierisiennrneianccvannnuslassnsamesesaiath ixeummenacnusiliyrrrednencdseagihabsrnndte 45 Grede a Prco TEE 45 Create a New Process sissississesicachadhaclsdec ines sateshaieadetvtanteedadedieaed cancdudiuauaesd cna thadadtvedddueantdehadaataduacdadend 46 EE Re 46 Retrieve a Process from the APA Server ssnsssssessessssssssrrnesrsrssstnnnerrrntssrnnnsrnnnnnnennsennnnnnnennsenn 47 DAVE APKOCOSS ac scacccssstiiacectevuhechaduadestewmnnsadduwene sae eanasducasiiedessanacuuasiiiedessaasadestanaady NEEN 48 AVS AS eene eege 48 Save a Process as an Image ssssseseeeserssesrresrstnssernttttrssstrnnettinsssennnnttnnnnstnnnetnnnssstnnnennnnnnnnat 49 Print a deele 49 Glose edel 50 Chapter 4 Configure EE 51 Configure Process Properties c ccccccceeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeaaaeeeseaaaeeeeseaaeeeesaaeeeesiaaeeeee 51 General Process Properties ccsccceceeseeeeeeeneeeeeeeaaeeeesaaeeeeeaaeeeeseeaeeeseecaeeestecaeeeeeeeeeeeeeeaaes 52 Gonfiguire ut EE 53 Process Studio User Guide Contents ACG ETA E 53 Delete an attribute E 54 View and Configure Process Fields ccccccceceeeeeeneeeeeeeaeeeeeeaaeeeeeaaeeeseaaaeeesecaeeseeneeeeseaes 54 Add a Custom Field to the Process Definition 54 De
65. Arbitrary Cycles The Arbitrary Cycles pattern demonstrates how a process can be designed for Tasks to be completed repeatedly The cycle can have multiple entry and exit points An arbitrary cycle is modeled using a Loop task In the preceding example the Loop ends when conditions set by the branch tasks result in tasks E or G being reached Implicit Termination Implicit Termination occurs when there are no further tasks to complete In the following example the process is complete when tasks 2 and 3 are complete as they have no successors ae a Process Studio User Guide 163 164 Chapter 11 Task Patterns Multiple Instances without Synchronization This pattern creates multiple instances of a sub process a J 3 Loop 7 A GC Multiple instances of an activity can be created using a Sub process task with Launch Sub process Instance as New Top level Process selected and Wait for Sub process Instance to Complete selected in a Loop The parent process continues without waiting for the sub process to complete Multiple Instances with a Priori Design Knowledge This pattern creates multiple 3 instances of a sub process This pattern is used when the required number of instances is known when the process template is designed The Sub processes have Launch Sub process Instance as New Top level Process and Wait for Sub process Instance to Complete selected The pattern uses an And task to
66. Connector and all related titles and logos are trademarks of Autonomy Corporation plc and its affiliates which may be registered in certain jurisdictions Microsoft is a registered trademark and MS DOS Windows Windows 95 Windows NT SharePoint and other Microsoft products referenced herein are trademarks of Microsoft Corporation UNIX is a registered trademark of The Open Group AvantGo is a trademark of AvantGo Inc Epicentric Foundation Server is a trademark of Epicentric Inc Documentum and eRoom are trademarks of Documentum a division of EMC Corp FileNet is a trademark of FileNet Corporation Lotus Notes is a trademark of Lotus Development Corporation mySAP Enterprise Portal is a trademark of SAP AG Oracle is a trademark of Oracle Corporation Adobe is a trademark of Adobe Systems Incorporated Novell is a trademark of Novell Inc Stellent is a trademark of Stellent Inc All other trademarks are the property of their respective owners Notice to Government End Users If this product is acquired under the terms of a DoD contract Use duplication or disclosure by the Government is subject to restrictions as set forth in subparagraph c 1 ii of 252 227 7013 Civilian agency contract Use reproduction or disclosure is subject to 52 227 19 a through d and restrictions set forth in the accompanying end user agreement Unpublished rights reserved under the copyright laws of the United States Autonomy Inc One Market
67. E 84 Gonnect a Loop Task o ip lt secenadedectesteethaaiiddcectenet esasnalacaetetenseaddcaenevetvessneal aaaea 85 Connect an Exception Task cccccsccceceeseeceeeeeneeeeeenaeeeeceaaeeeceaaeeeseeaaeeesecaeeeseceeeseneeeeeeneees 85 Connect an Escalate Task cviicdsteceteceidesuenestianntvevsduertunanadeccsuensbiannddewsduunbeeaaaay ANANE 86 REMOVE a Connection siecceceacsscacssurcecaadsviaisnnsteeeaddtavaassunvescdddsanasuanverdaassvasaeaseateddddaseassacectad 87 Save ia Composite Task tsvseiccietseceavtscactetseleciensaedanchterteciie a a ea e Aa iai 87 DIE TASK E E E E ee Aeede t 88 Convert a Task to another Type cccceeeceseeeeeeeeeeeeeeeeeeeeeeeeeeeeeeaeeeeeeeeaeeeeesaaeeeeseaaeeeeesaeeeesaaeeeess 88 Adda Comment to a ProGe sS csciccincstevesacvacchcnestvbassandetduddbeblsasneecdaddbeetsaaaeeacduaensbtaanbaccttuncebbesaaadecee 89 Chapter 7 Configure EE 91 C nfig re KEE 91 Configure General Properties ccccccceeeceeenneeeeeeeeeeeeeeeaeeeecaaaeeeseaaaeeeeeaaaeseeeaeeeeseneeeteeaes 92 E El 93 PUN e EE 93 SCOPE IR 93 Design COMMENTS a ccc tectessisccies loeedsesdadacentosiaseeddannteaesanseedbdtad ster nasiealddiad aeratinbadcad deelae 94 ELE le EE 94 Rettel 94 AGG An nde EE 94 Delete van Attribute arniran a ia aiia iaei rien 95 TASK ASSIGNMENT E RSN A E EEE ER 95 Process Studio User Guide Contents Assignment PLiO ity siasa AAAI Abort if Unassigned sorene n Configure Task Aeslon
68. E E A I E TELET 72 S b process Task EE 72 And RE 72 IER 73 BANC TASK E 74 LOOD WEE 74 Gale EE 75 Delay Task EE 75 ESCalate TASK en Zesseesuch E eh iesse ee seahandesssast E 75 EEXCOPUOM ASK site cbc casei vi cee cc pa een ew eda ae ee awe eames Stina each eee hast ae 76 Form RETTEN 77 Form TASK sacstessvnsinastine caemeteatandterettwatinasnamtaiieetanadnehads cauedans pg geg dE egieetegh gege ng Sege dek 77 Form Copy ET 77 Self EPON EE 77 Form Packet TASK asi sesdscsinnsnnnertensdndentathane resend adauaaten deunatadadaatangeewdasnedatateteriearndataihmerensasens 77 tility TASKS oceanerna ai deccete teenie ieee eee tele eet 77 Process Studio User Guide Contents eier RE 77 Command EE 78 E 78 E mail Task E 78 Manual TASK saichean a Aeae Daae e aa aaa aa aE aeaa 78 Web Service Task engt teveecantaniattevescandeaiaredearsevctateessiysivusadaboasalesdecdsathbaalatsaereacandastatsaurad 79 Other WaASKS EE 79 Composite Task riasiaca annaa aaa aae Aaa E aaa EES 79 Sticky e 80 Chapter 6 Add and Connect Tasks 0 0 0 0 ccc ccccccessesseesseesseseseseseseseseneseneseueanecaeseseaesenesanecanecanesecaseas 81 Adda KEE 81 Add a Task E EEN 82 Add a Container Task seniircirirreini setia aa a EA EE REAA EN 82 Add Tasks to a Container cccvissisaccctecccccevetascsntecceccisaveassccececcusavenasstacccccevessaaandeseccceVeaaaarceas 82 Connect TASKS csiis EER EEEE 83 Connecta Branch Faek eet iese eeg eeng ee tiii E ARNE NTARE
69. Enabled To enable the process so that it can be used by the users configured on the Permissions page select the Enabled check box Available through Web Desktop Folders To allow the process to be accessed through the Web Desktop or Portal select the Available through Web Desktop Folders check box Available through Friendly URL To specify a user friendly URL for the process select the Available through Friendly URL check box Type a URL in the URL ID box The URL must contain only legal URL characters Spaces are converted to underscores The URL ID must be unique throughout the entire APA system not just in the selected folder The URL can not exceed 250 characters Ki NOTE Ifthe URL ID is not unique then the APA Server appends characters to make it unique Exclusive modification rights To prevent anyone besides the publisher you and APA administrators from modifying the process select the Exclusive modification rights check box The Description and Keywords assigned to the process are displayed This information is read only To edit the description and keywords see General Process Properties on page 52 Click Next The Permissions page is displayed Continue with Publishing Wizard Permissions on page 141 Process Studio User Guide Publishing Wizard Permissions Publishing Wizard Permissions Permissions are used to control how APA users can interact with published processes
70. HP Process Automation Process Studio User Guide Version 7 3 Document Revision 0 01 May 2012 op Z k Connectis ca 905 695 2200 888 707 8221 info connectis ca www connectis ca Y Process Automation Notice This documentation is a proprietary product of Autonomy and is protected by copyright laws and international treaty Information in this documentation is subject to change without notice and does not represent a commitment on the part of Autonomy While reasonable efforts have been made to ensure the accuracy of the information contained herein Autonomy assumes no liability for errors or omissions No liability is assumed for direct incidental or consequential damages resulting from the use of the information contained in this documentation The copyrighted software that accompanies this documentation is licensed to the End User for use only in strict accordance with the End User License Agreement which the Licensee should read carefully before commencing use of the software No part of this publication may be reproduced transmitted stored in a retrieval system nor translated into any human or computer language in any form or by any means electronic mechanical magnetic optical chemical manual or otherwise without the prior written permission of the copyright owner This documentation may use fictitious names for purposes of demonstration references to actual persons companies or organizations are strictly coinc
71. HTML page can be displayed for the respondent to enter additional notes To display this page select the Display Page for Entering Subject and Notes check box Automatically Display Next Form on Submit When a form is submitted the APA server can automatically display the next form in the process To automatically display the next form select the Automatically Display Next Form on Submit check box If there are no active successor Form tasks when this task completes no additional forms are displayed Represent Static Table Cells as Top Level Fields In earlier versions of APA form fields located in static tables were stored as independent top level fields To enable support for processes that were designed in earlier versions of APA select the Represent Static Table Cells as Top Level Fields check box All form tasks imported from earlier versions of APA have this check box selected by default IMPORTANT This option changes the underlying mechanism used by the task to represent table data When checked each table cell is stored as an independent Field The field name is generated using the following pattern DTB__ lt Table Name gt _ lt row gt _ lt column name gt A Setting this option affects the current task only Tasks with this option enabled do not share table data with tasks that do not have this option enabled IMPORTANT Static table fields saved with this option enabled are not available to tasks that do not also have
72. NOTE You must type at least one alpha numeric character or the wild card character in the Search for box to perform a search In the in list click an option to define where to search The options that are available depend on the type of search Everywhere All of the following areas Process Search Process names Name Search Form names Folder Folder names Author Form or Process author names Publisher Form or Process publisher names Keywords Form or Process keywords Description Form or Process descriptions Form Text All form text for searching forms UserID User IDs for searching Users 133 134 Chapter 9 Connect to an APA Server First Name First Names for searching Users Last Name Last Names for searching users Last Name First Name Last Name First Names for searching users Work Queue Work Queues If you are searching for Users you can also specify further options Contains Search for words that contain the search term Starts With Search for words that start with the search term Exact Match Search for an exact match of the search term Click Search The search results are displayed in the list If necessary you can search again Select one or more of the search results O To select one of the search results click the item and click OK D In some circumstances you are able to select multiple items i Select one or more items in the list and click Add The items are added to the Selecte
73. Permissions are defined on the Permissions page of the Publishing Wizard when the process is published D i Publishing Wizard A Permissions Role Group User names Everyone Anonymous Add Role Add UserGroup Remove Permissions for Everyone Access Retrieve Data Manage Process View All Process Data Ld O Next Finish Cancel After a process has been published its permissions can be modified using the Management Console Configure Permissions To configure the permissions of a process use the following procedure To modify permissions 1 Click a user group or role in the Role Group User names list For information about how to add users to this list see Roles Groups and Users on page 142 Process Studio User Guide 141 142 Chapter 10 Publish a Process 2 Inthe Permissions area select the check boxes for the permissions that you want to grant to that user Clear a check box to remove a permission For more information about permissions see Permissions on page 143 S NOTE Ifa permission is available to a user or group by default the check box is selected and unavailable 3 After you have configured permissions O To continue the publishing process click Next The Process page of the Publishing Wizard dialog box opens Continue with Publishing Wizard Process Settings on page 145 O Click Finish to accept the default Process options and publ
74. Plaza Spear Tower Suite 1900 San Francisco CA 94105 US 01 May 2012 Contents Abo t This DOCU E 13 Documentation LUlgpgdateg gees ec sasteeheesavesbie euaptbedaahstecauseebetaanednese seceleyanielegenectuet cnuaeicgsaszetshensaee 13 Related DOCUMENTATION eehteitetekgeEENRNEEE ENEE EEN SEEEEERE geed EEN 14 el ET 15 Notational CONVENTIONS 0 cccceeeeeeeeeeeeeeeeeeeeeeeeeeeeaaeeeeeaaaeeeceaaaeeeeeeaaeeeenaaeeeenceaeeseeeeeeeeeesenees 15 Command line Syntax CONVENTIONS 0 eeeceeeceeeeeeeeeceeeeeeaeetecaeeesecaeeeeeccaeeeeneneeeeeseeeeeeenenees 16 ele 17 Autonomy Product References ccccccecceeeeeecneeeeceaaeeeeeeaeeeeecaaeeeseeaaeeeseccaeesseegaeesseeeneeeeeeeaeees 17 Autonomy Customer UDO sicsceessecncederiiccseedaeaseaectecedaseseteeedauevinesans SSES aaie aaa EES 18 Contact AUTONOMY EE 18 Part 1 Getting Started Chapter 1 DB RAVES EEN EE 21 Autonomy Process AUtOMAlON E 21 Autonomy Process Automation COMponents sssssseeessrssssiressiiesssrnttrtristsstnnnettnntsrnnssstnnnsennns 22 Chapter 2 Process Studio Interface and Commande eee ee eeeeeeeeeeeeeeeteteteteeeeeees 25 Process Studio User Interface 26 Templates and Mile 27 Graphical View ssicceyavccace degatagisssccccbepstegivesechecegsdviehveseneceps N E EES 27 XME VIEW dee EE 27 elei le EE 28 CUSTOMIZE PrOCESS St dio iieiea isinin OESE aa aaae iaa a e levee eg 28 Customize the Default Scripting Language ccccecceeeeeeeeeeeee
75. Process Definitions xpd Use File Name as Process Title 4 Navigate to the location where you want to save the process template 5 Inthe File Name box type Purchase_Order_Process 194 Process Studio User Guide Create a Process Template and Add Tasks 6 Click Save Related Topics Create a New Process on page 46 Save As on page 48 Add a Form Task to the Template The first task the start task in the process is a Form task Use the following procedure to add a Form task to the process template To add a Form task to the process template m Drag a Form task from the Task Library Forms drawer to the process template Graphical View 2 ai Purchase_Order_Process Form 1 Control Utility Patterns Other Related Topics Add a Task on page 81 Form Task on page 77 Configure the Form Task Use the following procedure to Process Studio User Guide apply a name duration and design comments to the task lt Graphical view XML View assign a published form to the task assign the task to a user For this task the assigned user is the individual who initiates the Purchase Order process on the APA server the process originator 195 Chapter 14 Process Studio Tutorial To configure the Form task 1 Double click the Form task to edit its properties The task s properties dialog
76. Read Only check box in the Properties area Then select the SupervisorSignature row and clear the Read Only check box d TIP To select multiple fields in a range click the first field and then hold down SHIFT while you click the last field in the range To select multiple fields that are not contiguous hold down CTRL while you click each field 11 Clic k Close Process Studio User Guide Create the Supervisor Review 12 Select the Customize Submit Action List check box and click Edit The Submit Action dialog box opens Submit Action Type Display Name Value bi ds Edi Submit Needs Edits D Submit Approved Delete 13 Configure the custom submit actions for the form as shown in the previous image Click Add to add custom submit actions Double click a cell to type or select a value 14 Click OK The Form tab should now be configured as shown in the following image General Form Assignment Attributes Simulation Select Form TutorialForms Purchase_Order Allow Form to be Edited Set Field Properties Allow Attachments to be Deleted Initialize Form at this Task IF first ze Customize Submit Action List Enable Form on Mobile Devices Use Form Defa v Allow viewing of Progress Map Display Page for Entering Subject and Notes Automatically Display Next Form on Submit C Represent Static Table Cells as Top Level Fields 15 Cli
77. Simulation Name E mail Process Originator Duration 0 00 00 01 000 Scoped ID e Design Comments Sends an email to the process originator when the form is rejected by the supervisor C Enable Script In the Name box type E mail Process Originator The Duration is set automatically to 0 00 00 01 000 1 second In the Design Comments box type the following text Sends an email to the process originator when the form is rejected by the supervisor Click the Email tab 221 222 Chapter 14 Process Studio Tutorial 11 S E mail 10 General Email Attributes Simulation administrator mycompany com Field Originator_Email Subject purchase Order Field Order_Number Rejected Purchase Order Field Order_Number has been rejected Contact your Supervisor for additional information In the From box type the e mail address of your APA Administrator for example administrator mycompany com In the To box type Field Originator Email When the e mail is sent the substitution syntax SField Originator_Email is replaced with the actual e mail address provided in the Originator_Email field on Purchase_Order form In the Subject box type Purchase Order Field Order_Number Rejected When the e mail is sent the substitution syntax Field Order_Number Is replaced with the actual purchase order number used on the Purchase_Ord
78. The Delay Between Instantiations simulates how often a process is used Reducing the Mean value simulates a process that is used more frequently it is placed under greater load The default values simulate a mean delay of 50 seconds between each instance with a standard deviation of 10 seconds In the Standard Deviation box type or select a standard deviation for the delay between instantiations 129 130 Chapter 8 Simulate a Process 10 11 NS NOTE Standard Deviation is a statistic used to measure the variation in a distribution Type or select the Number of Instances you want to run during the load simulation Move the Time Compression slider to increase or decrease the speed of the simulation The maximum time compression runs the simulation in the shortest time The minimum time compression results in a longer but possibly more accurate simulation When you move the slider the estimated simulation duration displays the estimated time to complete the simulation The Configure Roles area allows you to specify the number of users To add users to the simulation click Add The Configure Roles dialog box opens a Inthe Number of Users box type or select the number of users b Select the check boxes for the type of users you want to add to the simulation All Roles Relationships and Work Queues assigned within the process are available c Click OK The Roles you have configured are displayed in
79. age 72 m Configure Tasks on page 91 m Configure General Properties on page 92 Configure the Form Copy Task Use this procedure to configure the Form Copy task This task is used to send a copy of the rejected form to the process originator s inbox To configure the form copy task 1 Double click the Form Copy task to edit its properties The properties dialog box opens Form Copy 9 General Form Copy Assignment Attributes Simulation Name Duration 0 00 00 01 000 Scoped ID 9 Design Comments Sends a copy of the rejected form to the Process Originator C Enable Script 2 Inthe Name box type Form Copy Process Originator The duration of the task is set to 1 second by default As the task is automated do not change the duration 3 Inthe Design Comments box type the following Sends a copy of the rejected form to the Process Originator 4 Click the Form Copy tab 218 Process Studio User Guide Configure the Rejected Path Form Copy 9 General Simulation Select Form TutorialForms Purchase_Order Inbox Options Allow viewing of Progress Map C Represent Static Table Cells as Top Level Fields 5 Select the Allow Viewing of Progress Map check box 6 Click Search The Search Forms dialog box opens Search Forms Search for in Everywhere Location a i E w Lee CH 1 11 Public 2 dl Reports 3 i TutorialForms
80. all the users who might participate in this process as the process originator Click OK Repeat these steps to create a Tutorial_cCFo Relationship Refer to the Management Console User Guide for more information about configuring and using Relationships Add a Work Queue _ y NOTE Only Administrators can configure Work Queues For the purpose of this tutorial an APA Administrator should add a Tutorial_Accounting Work Queue to the APA Server To add a work queue 1 2 3 Start the Management Console In the navigation pane click Work Queues On the File menu click Add The Add a Work Queue dialog box opens In the Name box type Tutorial_Accounting In the Description box type Accounting Department Work Queue for Tutorial Process Studio User Guide Tutorial Prerequisites Add a Work Queue Name Tutorial Accounting Description hccounting Department Work Queue for Tuto wl Automatically get next item L oK Jl Gene j Verify that the Automatically get next item check box is selected Click OK The Tutorial_Accounting Work Queue is created Click the Tutorial_Accounting Work Queue and click View gt Permissions The Work Queue Permissions dialog box opens 9 Click Search Users to search for and assign users to the Work Queue During the tutorial process these users are sent forms for approval NOTE Only individuals assigned the Process Approver e role can be assigned to a Wor
81. an itself be escaped by adding another character For example the string Name is attr name would be substituted with the string Name is x where x is the value of the name attribute When an attribute or property is referenced in substitution syntax the value of the attribute or property is always converted to a string for the substitution Create Custom Scripts Process Studio includes a Script Editor that enables you to write custom script for you r processes You can use JavaScript and BeanShell solutions Refer to the APA Programming Guide for information about writing custom script Sn NOTE The Script Editor is designed for users who have a basic understanding of JavaScript BeanShell and programming concepts Process Studio User Guide Chapter 2 Process Studio Interface and Commands The following image shows the Process Studio Script Editor Script Editor Common BeanShell KE ee el Common JavaScript Eet rom 1 JavaScript function enteringDone state Auto check Syntax enteredActive state Script Language enteredActive state enteringDone state E Form Export 3 JavaScript Insert Function enteredActive state enteringDone state Find Replace Task Reference enteringDone state Form Copy 2 JavaScript Message To create a script 1 Open the Script Editor D On the Tools menu click Script Editor O Right cl
82. ask 74 business calendar 117 C change type command 88 close process template 50 command task 78 comments 89 committee task 79 compact tasks 31 composite task 79 save 87 configure process properties 51 Process Studio User Guide configure tasks 91 connect tasks branch task 84 escalate task 86 exception task 85 loop task 85 overview 83 connect to APA Server 131 console 31 container task 72 create dynamic values 34 create process template 46 create tasks 81 customize submit action list property 118 D date data type 174 default path branch task 74 delay task 75 delete instance 124 delete tasks 88 display page for notes property 121 duplicate instance 124 duration property 93 dynamic values 34 E e mail task 78 enable form on mobile devices property 119 escalate task 75 exception task 76 exit command 32 expressions datatypes 172 245 246 Index expression builder 32 field references 175 functions 180 operators 177 wildcard references 176 F flow simulation 123 form copy task 77 form export task 77 form packet task 77 form task 77 G gate task 75 graphical view 27 grid lines 31 initiate a process 146 instance delete 124 duplicate 124 overview 27 L load simulation 127 loop task 74 manual task 78 message task 78 N new window command 30 number data type 173 O open gate 75 open process template 46 ortask 73 P pack command 31 permissions publishing
83. asks E the longest Duration of a non linked tasks 2 Inthe Design Comments box type the following text This task is executed if the CFO or Accounting Work Queue reject the Purchase Order form 3 Click OK Related Topics m Configure Tasks on page 91 m Configure General Properties on page 92 Add Tasks to the Container The Rejected2 container task performs a similar function to the Rejected1 container To save time the tasks from the Rejected1 container can be copied and modified Use the following procedure to add tasks to the Rejected2 container To add tasks to the Rejected2 container 1 Double click the Rejected1 Container task in the Process Tree This is the Container task that was configured earlier in the tutorial 2 Select the tasks in the graphical view using one of the following methods D On the Edit menu click Select All D Drag a bounding outline around the tasks Process Studio User Guide 239 Chapter 14 Process Studio Tutorial O Click the first task hold down SHIFT and click the second task Copy the tasks D On the Edit menu click Copy O Right click the selected tasks and click Copy Double click the Rejected2 container task in the Process Tree to open the second container task The Graphical View is blank because no tasks have been added to the container Right click in the Graphical View and click Paste 6 The form copy task has already been configured to
84. asks to a single successor task and execute the successor when the first of the tasks is complete use an OR task See Or Task on page 73 Exclusive Choice An exclusive choice occurs when only one of several paths through a process is followed An exclusive choice is created using a Branch task oe Multi choice The multi choice pattern allows you to create a situation where more than one process path is followed if certain conditions are met Branch tasks are used to control whether each path becomes active BW Process Studio User Guide 159 160 Chapter 11 Task Patterns Simple Merge A simple merge occurs when two or more paths in a process meet Once one of the paths reaches the merge point the others are ignored A simple merge is modeled using an Or task with Cancel unfinished predecessors as soon as any predecessor is done selected as shown below As soon as Task 1 2 or 3 completes Task 4 becomes active and the remaining tasks become passive Of Process Studio User Guide Task Patterns Synchronizing Merge Multi merge Process Studio User Guide The Synchronizing merge pattern combines a multi choice pattern with the synchronization pattern In the example Task 2 and Task 4 may or may not execute If one task executes Task 6 does not become active until it has completed If both execute Task 6 does not become active until they have both completed A mult
85. ate in Process Studio The completed process is shown in Figure 3 Figure 3 Completed Tutorial Process Lee The Purchase Order process starts with a Purchase Order form that is submitted by the process originator The form is then reviewed by the originator s supervisor and the Chief Financial Officer if the purchase order is 10 000 or greater The form is then sent to the Accounting Work Queue for final approval Tutorial Prerequisites Before starting the tutorial ensure the following are complete m The user relationships and work queues that are used in this tutorial are configured on the APA Server by an Administrator See Create Relationships and Work Queues on page 189 m The Purchase Order form is available in the TutorialForms folder on the APA server If the Purchase Order form is not available it must be published See Publish the Purchase Order Form on page 191 188 Process Studio User Guide Tutorial Prerequisites Create Relationships and Work Queues Some tasks in the Purchase Order process are assigned to Relationships and Work Queues To complete the tutorial these must be available on the APA Server 5 NOTE If it is not possible to have the Relationships and A Work Queues set up on your APA server you can assign all tasks to Process Originator and skip the applicable steps Add Relationships For the purpose of this tutorial an APA Administrator should add a Tu
86. ath Expression The results of the Xpath Expression can be saved to either a process attribute or field Click Attribute or Field The Name box is pre populated with the list of process attributes or fields for the process If you type a process attribute or field name that does not exist a new one is created during the execution of the process Click OK to close the XPath Builder 14 To save the web service response to a process attribute select the Store Entire XML Response As Attribute check box Process Studio User Guide Configure Task specific Properties Configure a Form Task The Form task is used to assign a form for entering new data or modifying existing data within a process To configure a Form task 1 Open the Form Properties dialog box and click the Form tab 2 To select a form click Search The Search Forms dialog box opens 3 Browse to or search for the form you want to associate with the task Click the form and then click OK For information about how to search the APA server see Search the APA Server on page 132 4 Configure the form options Allow Form to be Edited Set Field Properties Allow Attachments to be Deleted Initialize form at this Task Customize Submit Action List Enable Form on Mobile Devices Allow Viewing of Progress Map Display page for Entering Subject and Notes Automatically Display Next Form on Submit Represent Static Table Cells as Top L
87. ath settings by double clicking each cell in the table and clicking a task output or branch path from the list O Task Output 0 should map to Branch Path 0 the Needs Edits loop O Task Output 1 should map to Branch Path 1 the Approved container O Task Output 2 should map to Branch Path 2 the Rejected2 container 9 Click OK 10 Click OK again 11 Save the process Related Topics m Configure Tasks on page 91 m Configure a Branch Task on page 100 Configure the Rejected2 Container If the CFO or Accounting Work Queue reject the purchase order form the Rejected2 container is executed The Rejected2 Container is used to send a copy of the rejected form to the process originator and their supervisor The container also contains an e mail task to send the process originator an e mail stating that the form was rejected This section of the tutorial describes how to m Configure the Rejected2 Container Task Process Studio User Guide Configure the Rejected2 Container m Add Tasks to the Container m Send a Copy of the Form to the Supervisor Configure the Rejected2 Container Task Use the following procedure to configure the general properties of the container task To configure the container task 1 Right click the Container task and click Task Properties TIP The Duration of a Container task is set automatically The duration is set to the greatest value of Q E the total durations linked t
88. available in Process Studio Process Studio User Guide 29 Chapter 2 Process Studio Interface and Commands m Open a New Window Zoom Controls m Undo or Redo an Operation m Show or Hide Grid Lines m Compact Tasks m View Messages m Exit Process Studio Open a New Window To open an additional Process Studio window use the New Window command Creating a new window enables you to view different parts of the same process side by side For example you can view the process template and a flow simulation at the same time The new window includes the same process templates and instances as the original window Any changes you make in one window are also applied to other windows To open an additional Process Studio window m On the View menu click New Window An additional Process Studio window opens Zoom Controls To magnify the process displayed in the Graphical View use the zoom controls You can type or select a zoom percentage in the Custom zoom 100 box on the toolbar or use the following procedure To zoom in or out 1 Click View gt Zoom and click one of the zoom options O Zoom In The process tasks appear larger O Zoom Out The process tasks appear smaller O Fit to Window The process is magnified so that all the Tasks fit in the Graphical View without scrolling O 100 The process is displayed at actual size O Custom You can define a custom zoom level Process Studio User Guide Proc
89. ber of seconds If the string is not formatted correctly returns time 0 The integral portion of the argument is interpreted as the number of seconds since midnight If the argument is negative returns time 0 Returns time 0 Returns time 1 if argumentis true otherwise returns time 0 Process Studio User Guide Field References Boolean Data Type Boolean items have one of two values true and false Boolean literals are not allowed The functions true and false should be used boolean boolean boolean boolean string number date time Field References Description Returns true only if the string argument is non empty NOTE This means that the expression boolean string false returns true that is round tripping from boolean to string and back is not symmetric Returns false if the number argument is 0 0 or not a number otherwise returns t rue Returns boolean number date Returns boolean number time Field References return the value of an entry field on a form For example Entry1 returns the value of field Entry References and Values Field references are always treated as string values with the following exceptions m Numeric format Entry Fields are treated as number values See Number Data Type on page 173 m Date format Entry Fields are treated as date values See Date Data Type on page 174 m Time format En
90. box opens General Form Assignment Attributes Simulation Name Form Fill and Submit Duration 0 00 05 00 000 Scoped ID 1 Design Comments This task allows the process originator to fill and submit the Purchase Order form for approval C Enable Script Edit Enable Script in Simulation In the Name box type Form Fill and Submit In the Duration box type or select 0 00 05 00 000 5 minutes In the Design Comments box type the following text This task allows the process originator to fill and submit the Purchase Order form for approval 5 Click the Form tab 196 Process Studio User Guide Create a Process Template and Add Tasks Form Fill and Submit 1 General Form Assignment Attributes Simulation Select Form TutorialForms Purchase_Order Allow Form to be Edited C Set Field Properties Edit C Allow Attachments to be Deleted Initialize Form at this Task D first C Customize Submit Action List Edit Enable Form on Mobile Devices Use Form Defa C Allow viewing of Progress Map C Display Page for Entering Subject and Notes C Automatically Display Next Form on Submit C Represent Static Table Cells as Top Level Fields 6 Click Search The Search Forms dialog box opens Search Forms Search For IR 8 in Everywhere Location EE e C2 oe 1 Public 2 dl Reports 3 Tut
91. calendar rather than absolute time when calculating how long the process is delayed See Use Business Calendar on page 117 Delay tasks can be configured with alternate delay values for use in Process Simulations to prevent you from having to wait an unreasonable amount of time for the task to complete Escalate Task The Escalate task handles tasks that have not completed within a certain period of time If the target task does not complete within the time specified the Escalate path is taken In the following example if the Form task does not complete within the time specified the E mail task is executed An e mail is sent to the address provided in the E mail task properties Process Studio User Guide 75 76 Chapter 5 Tasks Overview When the Escalate path is followed the task that did not complete on time remains active The Escalate task can be used to send an e mail to the user assigned to the Form task to remind them to complete it Escalate tasks can be configured to use the business calendar for time calculations rather than absolute time See Use Business Calendar on page 117 Escalate tasks can be configured with alternate delay values for use in Process Simulations to prevent you from having to wait an unreasonable amount of time for the task to complete Exception Task The Exception task is used for error handling The Exception task is linked to another target task in the process If
92. cecceeeeecceeeeeeecaeeeeeeneeeeeeeneeeeeneaaes Muli TIMOR GG EE N E Arbitrary Cycles sscccscsscttehciastaeebeesdeheastealstansbeeadashaceteatbansatenladeevaeretavses reiege TEE Multiple Instances without Synchronization ccceeceeeeeseeeeeeseeeees Multiple Instances with a Priori Design Knowledge escceceseee Multiple Instances with a Priori Runtime Knowledge ssscecceeec Multiple Instances without a Priori Runtime Knowledge Deferred Eelere Interleaved Parallel Routing eee cceeeeeeeeeeencnneeeeeeeeeeeeaaeeeeeeeeeeeeaaaees Milestone aii Votedepizgekeuek desednauwecnene teseadadiananntenwadisdainaasmearidnadaameemeeswudandsd Cancel Activity e Seele ege EERSTEN een eer Process Studio User Guide 10 Contents Chapter 12 APA Expression Li ET LE 171 Supported Functions and Operators ccccccccececeeeeeeeeeeeeeeeeeeeeaeeeeeeeaeeeeseeeaeeeeseaaeeeeseaeeeessaaeees 172 Expression Language Data Tvpes i nnnninaK KKA Enna KNN NANE ANENA 172 String Data KE 173 Number Data Typ erreipiskuuderenrinnriantdianii an aeea a aA EE AA AAEE RAEES 173 Date Data Type rcceriricivaoreneiiii nin a T EA A AA 174 UCCLE 174 Boolean Data Type canera eege ENEE EENEG ede Cd dee dee 175 Field Hererenceg eege EEGENEN ine TE E TEA 175 Literal VAlW OS seee piraiere iinr Ar onar tase eect ad e SEAN EENS ENEE AEE ANES 176 eeler 176 Expression Language Operators c cccccesscceeeenneeeeeenaeeeesaaeeeeeeaeeeseceae
93. cess O The URL posted to must be a valid URL for requesting a form for example Friendly URL O Field values supplied in the POST operation are used to prepopulate form fields they are used as initial values O Field values supplied as POST could conflict with field values supplied on the URL You should avoid supplying the same field using both POST data and URL parameters because the results usually appear on the server as multiple values for the repeated field ID Which one gets used first for a single value field is unpredictable O Field values supplied on the URL are not used at all if multi part POST is used to upload files O Fields supplied using POST or the URL must have a corresponding field defined in the form Otherwise the data for these fields is discarded D If multiple values are provided for a field but the field does not support multiple values for example single select list box the results are unpredictable O Field values must conform to the type expected by the form field Otherwise the data may be lost or not formatted correctly 147 148 Chapter 10 Publish a Process D Most system fields including LF__UserID and DFS__FormGUID are set by the server and any values supplied via POST or URL might be overridden by the server value Order of Initialization When a process is initiated operations take place in the following order Any values from virtual submit or form POST operation are a
94. ck OK Related Topics m Configure Tasks on page 91 Process Studio User Guide 203 Chapter 14 Process Studio Tutorial m Configure General Properties on page 92 m Configure a Form Task on page 113 m Search the APA Server on page 132 Assign the Form Task Using a Relationship Use the following procedure to assign the form to a supervisor using the Tutorial_Supervisor relationship Using a relationship ensures that the form is sent to the correct supervisor for approval regardless of the identity of the process originator To assign the task to a Supervisor 1 Double click the Supervisor Review form task to edit its properties The task s properties dialog box opens 2 Click the Assignment tab General Form Assignment Attributes Simulation Process Originator User or Work Queue Performer of Another Task Relationship Tutorial_Supervisor lt tutorial_supervisor gt Process Originator User or Group Performer of Another Task None Assignment Priority No ei C Abort if Unassigned 3 Click Relationship and click Browse The Search Users dialog box opens 204 Process Studio User Guide Add a Branch Task and Successor Tasks Search Users Search for in Everywhere v Contains Location fen C0 Game Gserib 1 SB Tutorial_CFO Tutorial_CFO 2 SB Tutorial_Su
95. ck the Purchase_Order form in the TutorialForms folder and click OK 201 202 Chapter 14 Process Studio Tutorial NOTE The Purchase Order form must be available i on the APA server If the form is not published to the APA server a Form Publisher can publish it See Publish the Purchase Order Form on page 191 8 Select the following check boxes o D D D Allow Form to be Edited Allow Viewing of Progress Map Display Page for Entering Subject and Notes Automatically Display Next Form on Submit 9 Select the Set Field Properties check box and click Edit The Edit Fields dialog box opens The list of fields is built dynamically by the APA server Edit Fields Field ID Required Read only Hidden Namespace Storage Name REQDATE oO bk o REQDATE Receiving Oo bel oO Receiving SHIPATTN oO M oO SHIPATTN SHIPCITY oO EI a SHIPCITY SHIPSTREET oO M a SHIPSTREET g SHIPSTREET_1 m ic m SHIPSTREET_1 EE SHIPTOST oO M oO SHIPTOST C Required ShippingAmount oO kel Lal ShippingAmount Subtotal o Kl La Subtotal C Read only a visorSignature SupervisorSignature O Hidden TERMS a Si D TOTAL oO kl oO TaxAmount a M a TaxAmount UNITI oO M o UNITI UNIT10 a Si E UNIT10 UNIT11 Oo M oO UNIT11 10 Set all of the fields except SupervisorSignature to Read Only The easiest way to do this is to select all of the fields and then select the
96. connectors and paths are used depending on the type of task See the following topics m Connect a Branch Task on page 84 m Connect a Loop Task on page 85 m Connect an Exception Task on page 85 m Connect an Escalate Task on page 86 To connect other types of task use the following procedure To connect tasks 1 Drag a connector from a task to its successor task Process Studio User Guide 83 Chapter 6 Add and Connect Tasks When you release the mouse button the path is displayed Related Topics m Add a Task on page 81 m Configure Tasks on page 91 Connect a Branch Task Branch tasks can be connected to more than one successor task Only one of these successor tasks is executed gv The path selected by a Branch task is controlled by defining a default path writing script writing an expression or based on another task Paths are identified by index values To connect a Branch task 1 Drag the green connector from the right side of the Branch task to a successor task When you release the mouse button a path is displayed 2 Continue this process until the Branch task has been connected to all of its successor tasks Each path is assigned a numeric value starting with 0 These values can be edited at any time see Configure a Branch Task on page 100 NOTE A path index p is only valid if p gt 0 and x p lt nPaths 1 where nPaths is the total number o
97. d O To add a new consequence click The Consequence dialog box opens i Inthe Consequence list click a consequence ii If required change the Display Name of the consequence iii Click OK O To remove a consequence click BER O To configure a consequence click the consequence and click Edit Process Studio User Guide Form Packet Rules A dialog box opens for you to configure the consequence See the following topics m Configure the Set Node State Consequence on page 63 Configure the Set Message in TOC Consequence on page 64 Configure the Add Form Consequence on page 65 Configure the Remove Nodes Consequence on page 67 Configure the Chain to Specific Node Consequence on page 68 If the consequence is a script the script editor opens so that you can write custom script For information about writing custom script see Create Custom Scripts on page 37 and refer to the APA Programming Guide 9 To view the list of rules that are applied click the Execution List tab The execution list shows the list of rules that are applied when the selected event occurs 10 Click OK Configure the Set Node State Consequence The Set Node State consequence changes the state of a node in a Form Packet gt Set Node State 5 Cardholder Information Cardholder Information Secondary Card S O Primary Cardholder Li H O Secondary Cardholder Change state to v To configure
98. d Form Task to the Process Template m Configure the Second Form Task set form field properties and add custom submit actions m Assign the Form Task Using a Relationship Add a Second Form Task to the Process Template Use the following procedure to add a second form task to the process template To add a second form task 1 Drag a Form task from the Task Library onto the process template a Purchase_Order_Process Form Fill and Submit 1 i Form 2 G Utility Form pl 3 Form Copy Form Export lt gt 2 Connect the Form Fill and Submit task to the second Form task Graphical View XML View To connect the tasks drag the black connector from the right side of the first form task onto the second form task 199 Process Studio User Guide 200 Chapter 14 Process Studio Tutorial Related Topics Add a Task on page 81 Form Task on page 77 Connect Tasks on page 83 Configure the Second Form Task Use the following procedure to configure the general properties name duration and design comments of the form task assign a published form to the task modify the properties of the form fields so that the supervisor cannot edit the form only sign it customize the submit actions available on the form Custom submit actions allow the supervisor to choose what to do with the form approve it reject it or return it to t
99. d Items list If required you can search the APA server again To remove an item from the Selected Items list click the item and click Remove ii Click OK to confirm your selection Browse Folders on the APA Server When the Search dialog box is used to select forms or processes you can browse the folders on the APA server m To open a folder double click its name in the list m To move up a level in the directory structure click Process Studio User Guide CHAPTER 10 Publish a Process This section describes how to publish a process to the APA server Publishing Overview Publish a Process Publishing Wizard General Properties Publishing Wizard Permissions Publishing Wizard Process Settings Initiate a Process Publishing Overview After a process has been created and tested it can be published to the APA server so that it can be used The following conditions must be met before a process can be published m You must be logged on to the APA server See Connect to the APA Server on page 131 m Only APA users assigned the Process Publisher role are permitted to publish Process Studio User Guide processes Refer to the Management Console User Guide for more information about Roles 135 136 Chapter 10 Publish a Process m You must have the relevant permissions for the folder on the APA server where you want to publish the process m The process must be saved before it can be publi
100. describes how to m Configure the Approved Container Configure the Approved Container The Approved Container includes tasks to inform the process originator the process originator s supervisor and the accounting work queue that the form has been approved Use the following procedure to configure the container To Configure the Approved Container 1 Configure three Form copy tasks to send a copy of the approved form to the Process Originator the Supervisor and the Accounting Work Queue 2 Configure an Email task to e mail the Process originator and inform them that the Purchase Order has been approved Earlier steps in this tutorial explain how to configure these tasks For example see Configure the Rejected Path on page 216 or Configure the Rejected2 Container on page 238 The Purchase Order Process template is complete You can now run a Flow Simulation in Process Studio see Simulate a Process on page 123 or publish the process to the APA Server see Publish a Process on page 135 Process Studio User Guide index A add tasks to process 81 allow attachments to be deleted property 118 allow form to be edited property 117 allow viewing of progress map property 121 andtask 72 APA server 23 APA Server connect 131 disconnect 132 retrieve process 47 search 132 assign tasks assignment overview 95 priority 96 automatically display next form property 121 boolean datatype 175 branch t
101. dit O To delete the parameter selected in the Parameters table click Delete To make the process wait for the executable file to complete before select the Block process execution until command completes check box If this check box is cleared the task executes the command and the process continues immediately If you want to run the command in Flow Simulation Mode check the Invoke in Simulation check box Configure a Message Task The Message task delivers a link or message to the APA inbox of the assigned use r For information on how to assign a task see Configure Task Assignment on page 97 Process Studio User Guide 105 106 Chapter 7 Configure Tasks To configure a Message task A Open the Message Properties dialog box and click the Message tab 2 Click one of the message formats You can send a Web Link or a Text message to the assigned user s APA Inbox Substitution syntax can be used in these properties See Create Dynamic Values Using Substitution Syntax on page 34 O To send a link click Web Link and type a URL in the box O To send a text message click Text and type a message for example instructions for the next step in the process in the box Select or clear the Allow Viewing of Progress Map check box See Allow Viewing of Progress Map on page 121 Configure a Committee Task The Committee task allows an action to be approved by a specified set of approvers To c
102. e awadaehanacitmicetamansnndadcilemamawhaehadenteats 124 BEE 125 Flow Simulation Commands cccccccesssecceeeeeeeeesecneeeeeeeeeeneaeeeeeeeeeesensaeeeeeeeeessenseeeeeeeneess 125 Change the State of Aborted Tasks 0 c ccccceeecceeceeneeececeeeeeeeaeeeseecaeeeseeneeeseeeeeeeeenes 126 Cancela E 126 Open a Gate Task sic cteissetecaus ates stendees doled het bteneed naai Eege dene iaie 126 Load KETTEN 127 Configure Tasks for Load Simulation 127 Configure Simulation Properties for LOOP Tasks ccccccceeeeeeeeeeeeeeeeeeeseceeeeeseaeeeestaeeeess 128 Configure Simulation Properties for Branch Tasks c ccccceseceeeeeeeeeeeeeeeeeeesnaeeeesenaeeees 128 Create and Run a Load Simulation 129 Chapter 9 Connect to an APA SQrve E 131 Connect to the APA Server e gderggugeeegg d e Sd EENEG REN 131 Disconnect from the APA Server cccciisscessncecccccvivesaancecccccuvevasasecccceuvetesaeteccecerseassesacucecedsnsensraees 132 Search the APA ene Esseg eege dee NENNEN ENNEN EENS EEN 132 Chapter 10 POURS a PCS E 135 Publishing OVervieW scniii nike Ladi a eae aoe ened 135 Publishing and Permissions ccceceeccccececeeeeeeeeceeeeeeeeeeaaeacceeeeeeeaaaaececeeeeeeeensseeceeeeenenteaes 136 Publish to Multiple Servers A 136 Publisha PROCESS sc asstdeccecessainastvnativens ieee RAEE EEN ARA AE ae 137 Publishing Wizard General Properties 0 cccccececeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeaeeeesesaaeeeeesnaeeeeessaaees
103. e a task reference 41 42 Chapter 2 Process Studio Interface and Commands Process Studio User Guide PART 2 Create and Deploy Processes This section provides information about creating testing and publishing Processes Create and Save a Process Configure a Process Tasks Overview Add and Connect Tasks Configure Tasks Simulate a Process Connect to an APA Server Publish a Process 44 Part 2 Create and Deploy Processes Process Studio User Guide CHAPTER 3 Create and Save a Process A process is set of connected tasks that are designed to achieve a specific goal This section describes how to Create a Process Create a New Process Open a Process Retrieve a Process from the APA Server Save a Process Save a Process as an Image Print a Process Close a Process Create a Process Process Studio enables process designers to quickly create test and publish processes A typical workflow for creating and publishing a process includes the following steps 1 Create a new process in Process Studio See Create a New Process on page 46 2 Add tasks to the process See Add a Task on page 81 Process Studio User Guide 45 46 Chapter 3 Create and Save a Process Connect the tasks in a logical sequence See Connect Tasks on page 83 Configure the tasks See Configure Tasks on page 91 Configure the process See Configure Process Properties on page 51
104. e additive operators Additive Operators The additive operators are Process Studio User Guide Expression Language Operators Operator Description add subtract The additive operators have lower precedence than the multiplicative operators Arithmetic operators with same precedence are evaluated left to right Arithmetic operators always convert their operands to number as if by a call to number Arithmetic operators always evaluate to a number Comparison Operators The Expression Language uses the following equality and relational operators Equality Operators The equality operators are Operator Relational Operators Operator Precedence m Equality operators have higher precedence than the relational operators Process Studio User Guide Description equal not equal Description less than less than or equal to greater than greater than or equal to 179 Chapter 12 APA Expression Language m All equality and relational operators with the same precedence are evaluated left to right Evaluation All equality and relational operators evaluate to Boolean values Conversion If the left operand is a st ring value the right operand is implicitly converted to a string value and the strings are compared lexicographically Otherwise the operands are implicitly converted to number and then compared Selection Operator The selection operator if takes three operands The fi
105. e instance of a process The Instances tab displays instances that have been created for testing in Process Studio Instances are grouped under top level nodes indicating the template from which they were created ID numbers are included in instance names so that you can distinguish between multiple instances of the same process The Instances tab is not displayed until an instance is created Graphical View XML View Process Studio User Guide Graphical View provides a graphical representation of the process It shows the Tasks that have been added to the process and how they are connected Graphical View is the default view in Process Studio Click the Graphical View tab to show the Graphical View XML View shows the XML that defines the current process Click the XML View tab to see the XML that is saved in the Process definition XPD file Process Studio includes a search feature that is used to search the XML markup To search the XML 1 On the Edit menu click Find in XML Alternatively press CTRL F The Find dialog box opens In the Search String box type the text you want to find Configure the search options O Select the Wrap Search check box for the search to continue from the beginning when the end of the document is reached The status bar indicates when the search has wrapped Otherwise you are notified that the end of the document has been reached O Select the Case Sensitive check box to make the search case
106. e packet for all tasks Duplicates a node on the packet for all tasks Chaining specifies which form should be opened next Chain to Next Node specifies that the next node should be opened ignoring nodes that are not associated with forms Chaining must be enabled by a separate consequence if not already enabled Chaining specifies which form should be opened next Chain to Previous Node specifies that the previous node should be opened ignoring nodes that are not associated with forms Chaining must be enabled by a separate consequence if not already enabled Chaining specifies which form should be opened next Chain to Specific Node allows you to choose the node that is opened next Chaining must be enabled by a separate consequence if not already enabled Enables or disables chaining Process Studio User Guide Form Packet Rules The Rules Editor allows you to define rules for a form packet using the General section or for specific process tasks that reference the form packet Rules Editor 4 General B Credit Card Application a Before Form Is Loaded 0 a After Form Is Saved 0 Cardholder information m Before Form Is Loaded 0 sll After Form Is Saved 0 Credit Report Information 0 4 Decision Summary 0 Process Task 1 Le Credit Card Application a Before Form Is Loaded 0 a After Form Is Saved 1 Cardholder information m Before Form Is Loaded 0 m Aft
107. ecaeeeeeeeeeeeeseeeeeeeeeaaes Configure a Form Copy Task ceccceeeeceeeeeeeeceeeeseeceeeeeceeeeeeteeeeeeeeennees Configure a Form Export Task 0 cccecceeceeeeeeeeeeeeeeeeneeeeeeneeeeeeseeeeeeeeeneees Configure a Form Packet Task cccccecceeeeeeeceeeeeeeceeeeeeeeeeeeseeeeeeeeeaees TASK d tele ET Use Business Calendar cccccccceceeeeeeecceeeeeeeceeeseeeeeeeeceeeeeeeeneeeeeeeeaes Allow Form to be Edited AA Set Field Properties A Allow Attachments to be Deleted 00 eeeeecceeeeeeeeeeeenneeeeeeeeeeeenaaaeees Initialize Form at this Task orien ins irana R EEEE Customize Submit Action List cccccecceeeeceeesenceeeeeeeeeeeecaeeeseeseeeeeeas Default Submit Actions Enable Form on Mobile devices ccccccceeeeeeeencneeeeeeeeeeennaeeeeeeeeeeeeaaaas Configure the form fields to display on mobile devices Allow Viewing of Progress Map ccc ccceeeeeseeeeeeceeeeeeeeeeeeenaeeeeeeeeneeeaaaas Display Page for Entering Subject and Notes Automatically Display Next Form on Submit cceeeeeeessseeeeeeeeeeeennees Represent Static Table Cells as Top Level Fields cccceseeeeees Process Studio User Guide Contents Chapter 8 SERIES 123 leen ue WEE 123 Create a Flow Simulation o eee ceccecceceeceeeeesenneeeeeeeeeseeeaaeeeeeeseeeeaaaeeeeseeseesesnsaeeeeeseseessaaees 123 Duplicate Del Ee 124 Delete an INStANCO scescsisiac vunseantactntecteananenseadnagenmuande sha laeis
108. ed identifier is invalid if the attribute does not exist or if the attribute has an empty value TaskAttr 123 comments returns the value of the comments attribute on the task with a scoped ID of 123 35 36 Chapter 2 Process Studio Interface and Commands Sequence Description Examples Sequence Description Examples Sequence Description Examples Sequence Description Examples SProp propertyName Retrieves the value of the specified process property as astring The propertyName parameter is any string xyz where the Process class as defined in the new BPM API has a corresponding getXyz method Returns an empty string if the property name is invalid or the property has an empty value SProp originator gets the originator of the process Prop startDate gets the start date of the process STaskProp scopediId propertyName Retrieves the value of the specified task property as a string The scopedid parameter must refer to a scoped task identifier on the current process template The propert yName parameter may be any string xyz where the Task class as defined in the new BPM API has a corresponding get Xyz method Returns an empty string if the scoped identifier is invalid or if the property name is invalid or the property has an empty value ke TaskProp 123 performer returns the performer of the task with a scoped ID of 123 STaskProp 456 startDate
109. ed under load The simulation is used to identify any potential bottlenecks early in the process A load simulation is also a useful tool when changes to a process are being contemplated The simulation can be used to analyze the impact of changes before they are made One example of an issue identified through load simulation is excessive loading of specific resources which could later manifest as a bottleneck caused by excessive queue times Configure Tasks for Load Simulation Before creating a load simulation the tasks in the process must be configured Simulation settings are located in the General and Simulation tabs of the task Properties dialog box The tasks that need to be configured are E Branch E Form E Message E Command E Form Copy E Script E Committee E Loop E Sub process E E mail E Manual E Web Service To configure the simulation properties for loop or branch tasks for see the following topics m Configure Simulation Properties for Loop Tasks on page 128 m Configure Simulation Properties for Branch Tasks on page 128 To configure the simulation properties for other tasks use the following procedure To configure simulation properties 1 Double click the task The task Properties dialog box opens Click the General tab In the Duration box type or select an estimate for the length of time required to complete the task Process Studio User Guide 127 128 Chapter 8 Simulate a Process
110. edecessor more than one start task the two paths are automatically executed in parallel In the following example tasks A and C execute in parallel 152 Process Studio User Guide Simple Design Patterns Branch A process can split into more than one path A branch task is used to decide which path is taken A branch task can be configured to select a path based ona default value an expression or the result of another task Related Topics m Branch Task on page 74 Process Studio User Guide 153 Chapter 11 Task Patterns Loop A loop allows part of a process to be used repeatedly Loops are created using a loop task Related Topics m Loop Task on page 74 Join When two or more tasks must be complete before another task can begin it is necessary to create a join Tasks can be joined using the And task or connected directly to a successor If you do not use an And task to join two or more predecessor tasks to a single successor task the presence of an And task is implied it is default behavior that a task does not start until all of its predecessors are complete Process Studio User Guide Simple Design Patterns In the following example tasks A B and C must complete before Task D can begin Task D is executed only one time It does not execute for each predecessor task Related Topics m And Task on page 72 And The And task requires its predecess
111. eeds Edits lo Submit Approved Reject Rejected E 12 Configure the custom submit actions for the form as shown in the preceding image Click Add to add custom submit actions Double click a cell to type or select a value 13 Click OK 14 Click the Assignment tab CFO Review 7 General Form Assignment Attributes Simulation Process Originator User or Work Queue Performer of Another Task Relationship Tutorial CEO lt tutorial_cfo gt User or Group Performer of Another Task O None Assignment Priority Normal k C Abort if Unassigned 15 Click Relationship and click Browse The Search Users dialog box opens 226 Process Studio User Guide Configure the Accounting Work Queue Review Task 3 Search Users Search for Il in Everywhere Contains Location C Itame Leet 1 SB Tutorial_CFO Tutorial_CFO 2 SB Tutorial_Supervisor Tutorial_Supervisor Cancel 16 Click Tutorial_ CFO and click OK 17 Click the Process Originator relationship type 18 Click OK 19 Save the process Related Topics m Form Task on page 77 m Configure Tasks on page 91 m Configure General Properties on page 92 m Configure a Form Task on page 113 m Task Assignment on page 95 m Search the APA Server on page 132 Configure the Accounting Work Queue Review Task The Acco
112. eeeeeeeeeeeeeeeeeseeeeeseeaeeeeeeaaees 28 Customize the Task Library ccccceecsecceeeeeecceeeececaaeeeecaeeeeecaeeesecaaeeesegaeeeseeeneeeseeeeeeeeseaaeees 28 Process Studio User Guide Contents Customize the Toolbar cccccccccesceeeeeeneeeeeeeaeeeeeeaaeeeecaaaeeeeeaaaeeeeeeaaeeesecaaeeeeeeeaeeseeseeeeneeees 29 Process Studio Commands EE 29 Open a New WINdOW ecccccceeceeee cence eeeeeeeeeeeeaaeeeeeeeaeeeeeeaaaeeecaaaaeeecaaaeeeeeaaesessaaeseseeaeeeseeaas 30 ZOOM COMMONS EE 30 Undo or Redo an Operation sisirain ana aaa SES i aaaea aaa ness 31 Show or Hide Grid Lines oo ee eececcec cence ee eeeeeeeeeeaeeeeeeaaeeeeeeaaeeeecaaaeeeeeaaaeeeeeaaaeeeseaeeeseeceeeneeaes 31 Compact Tasks ic i0 c cassettes eed Edge einen 31 KUER E EN Exit Process e Te EE 32 Build e EE 32 Create Dynamic Values Using Substitution Syntax cecccceeeeceeeeeeeeeeeeeeeeeeeeaaeeesecaaeeeentaeeetees 34 Substitution Syntax Definitions 35 Additional ul tel tun Le EE 37 Create CUStomi SCripts E 37 Check a Script for Syntax Errors ccccceeecceeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeaeeeseeeaeeeeeeaaeeeeeaaeeeesiaaeeeea 39 Set the Script Language in the Script Editor ccecceceeeeeeeeeeeeeeeeeeaeeeeeeaaeeeeecaeeesnaeeeeees 39 Find and Replace Text in the Script Editor ccccceeceeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeseneeeeenaeees 39 Insert a FUNCHIONINtO a Script 2 ves sasececeiceccsseians eects ainiaan saa ea a a raaa a
113. eeseecaeeeseegeesteseeeeeeeeaaes 177 Grouping Operator cecceeecececeeeeeeeneeeeeeeeeeeeeeeeeeeeeeeeeeeeseaaeeeeseaaeeeesseaeeeeeeeaeeeeeseaeeeessaaeees 177 Logical Kei TEE 177 Tt lege TE 178 Multiplicative Operators ooo eeeecceceeeeeeeeeeeeeeeeeaeeeeeeeaaeeceeaaeeeseceaeeeseccaeeeeseneeeeeteneeeeeenaeees 178 Additive ele e TEE 178 GompariSOn Operators 5s cessedeassces ce becca cendanti cade edeee abi Med aniani dianainn iiaia iiaa iS 179 Eq a lity ee TEE 179 el wie Ee E Te 179 NK EE 179 Evaldemon eer a EEN 180 ele EE BEE 180 Selection Operator orsina aaa a ELE EES a aa Eaa EEN EEENeEeE Ee 180 String Concatenation Operator esssseesssssiesssernsssretsritnssetnntrttenssetnnntnnnnssstnnnetnnntsnennnnn nnne 180 Expression Language Funchons naa 180 Boolean giele 181 Date FUNCIONS sanke n E O E ENEE tales 181 Time tele 181 String ele e 182 Kli elle EE 183 MASI lee EE 184 Process Studio User Guide Contents Part 4 Process Studio Tutorial Chapter 13 MS lee KE e CT EE 187 Tutorial e UE 188 BU el Re EE 188 Create Relationships and Work Queues ccccecececeeeeeeeceeeeeeeceeeeeecaeeeeeecaeeeetenieeeeseneeeeneeaes 189 Add RElIAUONSIIPS EE 189 Add a Work Queue scc22 ticedeesptteiiineavdestdacn ds D st aeaaeai a aaaeeeaa aaa aeaa 190 Publish the Purchase Order FOrm cccecceeeeeeeceeeeeeeeeeeeeeeeeeeeeeceeeeeseeeeeeeseaeeeesseaeeeesiaaeees 191 Chapter 14 Process Studio Tutorial E 193 Create a Pr
114. eld on the form To set field properties 1 2 Process Studio User Guide Select the Set Field Properties check box Click Edit The Edit Fields dialog box opens The list of fields in this dialog is built dynamically by the APA Server based on the selected form 117 Chapter 7 Configure Tasks 3 Inthe list click a form field that you want to modify You can select multiple fields by holding down the CTRL or SHIFT keys 4 Select or clear the Required Read only or Hidden check boxes in the Properties area 5 Click OK Allow Attachments to be Deleted To allow users at the selected process step to delete attachments added by any user in the process select the Allow Attachments to be Deleted check box Initialize Form at this Task When a form is initialized form fields are populated with initial values and profile data from the APA server If the form uses any on load database lookups these are also executed In the Initialize Form at this Task list click one of the options m If first use Default The form is initialized if it has not been previously opened and then saved or submitted The form does not initialize for the current task if it was opened and saved elsewhere in the process m Always The form is initialized every time it is opened in this task regardless of how this form is used in other tasks in this process m Never If this option is selected the form never initializes for this task
115. er Resources attachments The location of the server resources directory is specified when APA Server is installed D If you are exporting data to a Document Management System click a Document Management System Connect Agent If you select a Document Management System Connect Agent files attached to forms are uploaded to the Document Management System in the directory provided when the Document Management System Connect Agent was configured with the exception of URL attachments which are stored in the APA ROUTEATTACH database table If you select a Document Management System that does not allow the user to be automatically authenticated using the APA Form they will need to set up their Document Management System User Name and Password For more information refer to the APA Portal online help or Web Desktop online help Response page URL After a process is initiated a response page is displayed To use a custom response page select the Response page URL 139 140 Chapter 10 Publish a Process 10 11 check box and type the URL for the response page you want to use The URL can not exceed 250 characters NOTE Ifa process is initiated and an initial form task is ge not specified in the process definition the user is redirected to the response page URL or the default Lag response page If an initial form task is specified in the process definition the form is displayed and the response page URL is ignored
116. er Form Is Saved 0 4 Credit Report Information 0 4 Decision Summary 0 Related Topics m Create a Rule on page 61 Create a Rule To create a rule use the following procedure To create a node Rule 1 Onthe Tools menu click Rule Editor The Rules Editor dialog box opens Process Studio User Guide 61 Chapter 4 Configure a Process Rules Editor Node Rules Execution List Credit Card Application a Before Form Is Loaded 0 Priority Description a After Form Is Saved 0 e Cardholder Information m Before Form Is Loaded 0 m After Form Is Saved 0 3 eCredt Report Information 0 Decision Summary 0 S i Form Packet 1 Credit Card Application a Before Form Is Loaded 0 m After Form Is Saved 1 Consequences Cardholder Information lll Before Form Is Loaded 0 m After Form Is Saved 0 3 e Credit Report Information 0 3 e Decision Summary 0 Condition Click the Node Rules tab Click underneath the Node Rules list A new rule is added to the list In the Name column type a name for the rule In the Priority column set the priority In the Description box type a description for the node NO A Specify when the rule is applied a Inthe Condition list click either Expression or Script to specify a condition b Click Edit to edit the expression or script 8 In the Consequences area specify the consequences of the rule being applie
117. er form Type the e mail message Purchase Order Field Order_Number has been rejected Contact your Supervisor for additional information Click OK Click Parent level to return to the parent process template Alternatively double click Purchase_Order_Process in the Process Tree Save the process Process Studio User Guide Configure the CFO Review Task Related Topics m E mail Task on page 78 m Configure Tasks on page 91 m Configure General Properties on page 92 m Configure an E mail Task on page 107 m Create Dynamic Values Using Substitution Syntax on page 34 Configure the CFO Review Task When the value of the purchase order submitted by the process originator is 10 000 or greater and the originator s supervisor approves the form the CFO Review task is executed This task is assigned to the Chief Financial Officer using the Tutorial_CFO Relationship The CFO receives the completed Purchase Order form in their Inbox The CFO can then review the form and choose to approve it reject it or send it back to the originator for editing This section of the tutorial describes how to m Configure the CFO Review Form Task Configure the CFO Review Form Task Use the following procedure to m configure the general properties of the CFO Review form task m assign the Purchase_Order form to the task modify the properties of the form fields so that the CFO cannot edit the for
118. es To enable script for this process select the Enable Script check box To edit the script in the Script Editor click Edit See Create Custom Scripts on page 37 To enable script in Flow Simulation Mode select the Enable Script in Simulation check box This check box is only available if Enable Script is selected a NOTE Itis important to type a title author 7 description and keywords for the process so that it can be found when searching the APA server Configure Attributes Attr ibutes can be assigned to the process using the Attributes tab of the process properties dialog box Ad d an attribute To add an attribute to the process use the following procedure To add an attribute 1 2 3 4 Process Studio User Guide Click New In the Name column type a name for the attribute In the Value column type a value for the attribute In the Type column click a data type Text Number or Scoped ID z NOTE A Scoped ID is a task identifier that is unique l within a process 53 54 Chapter 4 Configure a Process Delete an attribute To delete an attribute use the following procedure To delete an attribute 1 Click the attribute in the list 2 Click Delete View and Configure Process Fields The Fields Tab of the process properties dialog box displays all forms packet namespaces and custom fields in the process You can add and delete custom fields in the proces
119. ess Studio Commands The custom zoom dialog box opens i Type a zoom percentage in the box between 25 and 200 ii Click OK Undo or Redo an Operation Process Studio remembers the changes made to a process so that you can reverse your actions Use the Undo command to undo the last operation The Undo stack tracks the last 100 operations Not all operations can be reversed To undo the last operation m On the Edit menu click Undo m Press CTRL Z To redo the last undone operation m On the Edit menu click Redo m Press CTRL Y Show or Hide Grid Lines To show or hide the grid lines in the process template and instance backgrounds use the Grid command To show or hide the grid m On the View menu click Grid Compact Tasks To layout the Tasks in the current Process Template so that they use the minimum amount of space use the Pack command To layout tasks using the minimum space m On the Edit menu click Pack View Messages The Console is used to view messages regarding startup problems or unexpected application errors Process Studio User Guide 31 32 Chapter 2 Process Studio Interface and Commands To open the console m Onthe View menu click Console Exit Process Studio To exit Process Studio use the following procedure To exit Process Studio 1 On the File menu click Exit 2 If there is a single unsaved process templates a dialog box opens asking if you want to save your work
120. ess Studio User Guide Build Expressions Figure 1 The Expression Builder User Interface Expression Builder Expression ategories Process Data Functions Operators Comparison Logical Tasks nunl a numZ The Expression Builder user interface consists of Process Studio User Guide Expression box The Expression box displays the expression Type in the box to create or modify an expression Check button Click Check to test the expression for validity Any syntax errors are reported The expression is also checked when you click OK Operator buttons Click a button to insert the operator into the expression at the current insertion point Clicking a button is the same as typing the operator directly into the Expression box Categories list Displays a list of folders Each folder contains elements that can be inserted in your expressions Click a folder to show or hide its subfolders and display a list of items in the Items list 33 34 Chapter 2 Process Studio Interface and Commands O Process Data Contains subfolders for Process Attributes Fields and Process Properties that can be used in the expression Refer to the APA Programming Guide for more information about Process Data and Process Properties O Functions Contains subfolders for the functions defined by the Expression Language See APA Expression Language on page 171 O Operators Contains
121. evel Fields Process Studio User Guide See Allow Form to be Edited on page 117 See Set Field Properties on page 117 See Allow Attachments to be Deleted on page 118 See Initialize Form at this Task on page 118 See Customize Submit Action List on page 118 See Enable Form on Mobile devices on page 119 See Allow Viewing of Progress Map on page 121 See Display Page for Entering Subject and Notes on page 121 See Automatically Display Next Form on Submit on page 121 See Represent Static Table Cells as Top Level Fields on page 121 113 114 Chapter 7 Configure Tasks Configure a Form Copy Task The Form Copy task is used to add a read only copy of a form to a user s APA Inbox To configure a Form Copy task 1 Open the Form Copy Properties dialog box and click the Form Copy tab 2 To select a form click Search The Search Forms dialog box opens 3 Browse to or search for the form you want to copy Click the form and then click OK For information about how to search the APA server see Search the APA Server on page 132 4 Select or clear the following check boxes O Allow Viewing of Progress Map See Allow Viewing of Progress Map on page 121 O Represent Static Table Cells as Top Level Fields See Represent Static Table Cells as Top Level Fields on page 121 Configure a Form Export Task The Form Export task is used to ru
122. f path choices for the Branch task NOTE H an invalid path index is specified an exception occurs and the task is moved to the Aborted state Process Studio User Guide Connect Tasks Related Topics m Branch Task on page 74 Connect a Loop Task Loop tasks can be connected to more than one task and have two connectors Form j 3 k To connect a loop task 1 Drag the blue connector on the top of the Loop task to the target task the first task inside the loop t 1 2 Drag the black connector on the right of the loop to the task that should be executed when the loop terminates Related Topics m Loop Task on page 74 Connect an Exception Task An Exception task is connected to a target task The Exception task is only executed if the target task enters the Aborted state To connect an Exception task you must draw the path from the Exception task towards the target task To connect an Exception task m Drag the red connector from the left side of the exception task onto the target task TIP If the path is drawn correctly it is displayed in red with arrows pointing in both directions Process Studio User Guide 85 Chapter 6 Add and Connect Tasks Related Topics m Exception Task on page 76 Connect an Escalate Task An Escalate task is connected to a target task The Escalate task is only executed if the target task is not completed within a specified amou
123. file Click Go 4 Inthe Operation area click Select The Select Operation dialog box opens This dialog box displays all the SOAP operations listed in the WSDL Select Operation 1 BusinessProspectService EI BusinessProspectServiceSoap iad p a KL BusinessProspect CompanySearch GetTermsOfAgreement GetTestDunsNumbers GetCountryCodes GetRemainingHits 5 Inthe list click an Operation 6 Click OK The Service Port and Operation values are displayed The Request tab is also populated The request refers to the SOAP request input parameter type and value based on the XML schema defined in the WSDL URL for the selected operation Process Studio User Guide 109 Chapter 7 Configure Tasks Request Response Parameter Name Type Yalue soapenv Envelope a E soapeny Header B C lLicenseInfo LicenseInfo B C lUnregisteredUser UnregisteredUser Ep E lEmailAddress EmailAddress string B C IRegisteredUser RegisteredUser lUserID UserID string Password Password string lt 7 The Value column in the Request tab can be modified Double click the Value cell in the applicable row to modify the value Substitution syntax can be used to create a dynamic value See Create Dynamic Values Using Substitution Syntax on page 34 8 To include a header in the SOAP request select the Include Header in Web Service Request check box The header is dis
124. g relationships refer to the Management Console User Guide Relationship Process Originator A task can be assigned to a user who is related to the process originator The Process Originator is the individual who initialized the process on the APA Server For example if the Relationship selected is Manager and the process originator is John Smith the task is assigned to John Smith s Manager Relationship User or Group A task can be assigned to the selected Relationship of a User or group For example if the Relationship selected is Manager and you have selected the user John Smith the task is assigned to John Smith s Manager Relationship Performer of Another Task A task can be assigned to a user who is related to the performer of another task in the process For example if the Relationship selected is Manager and the Performer of the selected task is John Smith the task is assigned to John Smith s Manager None A task can be assigned no users This might be appropriate if you intend to set the assigned user for the task at a later time for example using script Assignment Priority Tasks can be assigned a priority low normal or high When a task is assigned to a user the Priority flag is displayed in the Importance column next to the assigned form in the user s inbox For more information about the Importance column refer to the APA Portal online help or Web Desktop online help Additionally when a user clic
125. he Script Language dialog box opens In the Script Language for This Script list click one of the languages 3 If the selected language is not the default language you can select the Set Selected Language as Default for New Tasks and Processes check box to make it the default language 4 Click OK Find and Replace Text in the Script Editor To find and replace text in the Script Editor use the Find Replace tool To find and replace text in the Script Editor 1 Click Find Replace The Find Replace dialog box opens 2 Inthe Search String box type the text you want to search for If you would like to replace the text type the text you want to use as a replacement in the Replace With box 4 Configure the search options O Select the Wrap Search check box to continue the search from the beginning when the end of the script is reached Process Studio User Guide 39 40 Chapter 2 Process Studio Interface and Commands O Select the Case Sensitive check box to make the search case sensitive distinguish between uppercase and lowercase text O Select the Use Regular Expression check box if you want to provide a regular expression instead of a literal search string Further explanation of this syntax is available here http java sun com j2se 1 5 0 docs api java util regex Pattern html Click Find Next If the text in the Search String box is found in the script it is highlighted in the Script Editor To ignore the
126. he originator for editing configure the form to display a notes page on submission The supervisor can then type notes to explain why the form has been rejected or returned for editing To configure the general properties of the Form task 1 Double click the new Form task to edit its properties The task s properties dialog box opens Process Studio User Guide Create the Supervisor Review 7 Process Studio User Guide General Form Assignment Attributes Simulation Name Supervisor Review Duration 0 00 05 00 000 Scoped ID 2 Design Comments This task allows the process originator s supervisor to review the form The supervisor can sign and approve the form reject the form or return the form to the sender for modification C Enable Script Edit Enable Script in Simulation In the Name box type Supervisor Review In the Duration box type or select 0 00 05 00 000 5 minutes In the Design Comments box type the following text This task allows the process originator s supervisor to review the form The supervisor can sign and approve the form reject the form or return the form to the sender for modification Click the Form tab Click Search The Search Forms dialog box opens Search Forms Search for in Everywhere bi Location 411 1 17 Public 2 be Reports 3 TutorialForms Cancel Cli
127. he task Enable Script To enable script for this task select the Enable Script check box Click Edit to open the Script Editor For information about the script editor see Create Custom Scripts on page 37 To enable script in Flow Simulation Mode select the Enable Script in Simulation check box This option is only available if the Enable Script check box is selected NOTE Deprecated script is not supported in Flow Simulation Mode Additionally some API objects are not P supported in Flow Simulation Mode due to the fact that the complete server environment is not available Configure Attributes You can apply attributes to Tasks in a process For example you can create an attribute that counts the number of times a Loop task is iterated Add an Attribute To create a new attribute use the following procedure To add an attribute 1 Click New A new item is added to the list Process Studio User Guide Task Assignment 2 In the Name and Value cells type the name and value of the attribute Double click a cell to edit its value 3 Inthe Type cell click a data type for the attribute Text Number or Scoped ID A Scoped ID is an identifier that is unique within a process Delete an Attribute To delete an attribute use the following procedure To delete an attribute 1 Click the attribute in the list 2 Click Delete Task Assignment Form Form Copy Message and Manual Tasks must be ass
128. hild properties are also duplicated To delete a node select the node and click Delete To move a node in the structure click Move Up or Move Down 6 To associate a form with a node click the node and click Form Properties A dialog box opens a In the Default Namespace box select the default namespace Process Studio User Guide Form Packet Rules m Path Uses the path within the Table of Contents tree starting with the Packet Namespace and including the selected node m Parent Uses the path within the Table of Contents tree starting with the Packet Namespace and ending with the parent of the selected node m Root Uses the predefined Packet Namespace b Click Search to select a form on the APA server See Search the APA Server on page 132 c If required edit the Namespace and Storage Name for the form fields Like any other process attribute form packet fields can be referenced outside of form packet tasks such as from a regular form task by specifying the full namespace Form packet namespaces have the structure Packet FolderSSubfolderSForm d Select or clear the Represent Static Table Cells as Top Level Fields check box For more information see Represent Static Table Cells as Top Level Fields on page 121 e Click OK Delete a Form Packet To delete a form packet use the following procedure To delete a Form Packet 1 On the Edit menu click Process Properties The process prope
129. hin a process For info rmation about the types of task that are available in Process Studio see Tasks Overview on page 69 Add a Task Add a Task Connect Tasks Save a Composite Task Delete a Task Convert a Task to another Type Add a Comment to a Process To add tasks to a process you must be in Graphical View If you are in XML View click the Graphical View tab To add a task to a process template Process Studio User Guide Drag the task from the Task Library onto the Graphical View 81 Chapter 6 Add and Connect Tasks When you release the mouse button the task is added to the process template Related Topics m Tasks Overview on page 69 m Connect Tasks on page 83 m Configure Tasks on page 91 Add a Task Pattern Arrangements of tasks that are commonly used are provided in the Patterns Drawer of the Task Library To add a pattern to a process template 1 Inthe Task Library click the Patterns drawer 2 Drag one of the task patterns onto the Graphical View When you release the mouse button the pattern is added to the process template Related Topics m Add a Task on page 81 m Task Patterns on page 151 Add a Container Task A Container task is a container that can hold other tasks A Container task can be used to group tasks that constitute some significant part of a process To add a container task to the process 1 Inthe Task Library click
130. i merge occurs when process paths converge Normally a task is not executed repeatedly as each of its predecessors completes Instead it executes a single time once all of its predecessors are complete see Synchronization on page 158 In a multi merge the successor task is executed once for each predecessor A multi merge can be implemented using a Sub process with Embed Sub process Instance in Main Process selected for the activity following the merge with a Sub process task for each merging activity Each of the three Sub process tasks has a target of the same process As each Task 1 2 and 3 completes the Sub process executes 161 162 Chapter 11 Task Patterns Discriminator The Discriminator pattern demonstrates how an Or task can be used to wait for tasks to complete before executing the next task in the process It also shows how a loop can be used to repeat the process 7 Loop O on A discriminator is modeled using an Or task with the Cancel unfinished predecessors as soon as any predecessor is done option cleared in a Loop As soon as Task 2 3 or 4 completes Task 5 becomes active The Loop task waits until Tasks 2 3 and 4 have all completed and then reset the states of all tasks in the Loop body back to ready Finally it makes Task 1 active again The loop does not activate Task 1 until all predecessor tasks 2 3 4 and 5 have completed Process Studio User Guide Task Patterns
131. icate node consequence duplicates the selected node in the form packet Duplicate Node Cardholder information Source node Credit Report Information Decision Summary New node New node name optional To configure the Duplicate Node consequence 1 Inthe list click the node that you want to duplicate and click Set source node 2 Specify the location of the new node 66 Process Studio User Guide Form Packet Rules 4 O To place the duplicated node under another node click that node in the list and click Set target parent node O To place the duplicated node in the root of the form packet do not specify a target parent node In the New node name box type a name for the new node The name is optional If you do not specify a name the name of the original node is used Click OK Related Topics Create a Rule on page 61 Configure the Remove Nodes Consequence The Remove nodes consequence removes one or more nodes from a form pac ket Remove Nodes Please select the nodes to be removed Cardholder information e Credit Report Information Decision Summary To configure the Remove Nodes consequence 1 3 In the list click the nodes that you want to remove To select multiple nodes hold down CTRL and click each node Click gt The nodes are added to the other list Click OK Related Topics Process Studio User Guide Crea
132. ick a task in the Graphical view and click Task Properties Click the General tab Select the Enable script check box and click Edit The Script Editor dialog box opens Write your script To save your script click Apply To save and exit the Script Editor click OK To close the Script Editor without saving the script click Cancel Related Topics m Check a Script for Syntax Errors on page 39 m Set the Script Language in the Script Editor on page 39 m Find and Replace Text in the Script Editor on page 39 m Insert a Function into a Script on page 40 m Insert a Task Reference into a Script on page 40 Process Studio User Guide Create Custom Scripts Check a Script for Syntax Errors Any script errors cause a task to go to the Abort state It is best to use an Exception task to handle errors in script To check a script for syntax errors use the following procedure To check a script for syntax errors m Click Check Syntax to check the script for errors m Select the Auto check Syntax check box for the Script Editor to check the script for syntax for errors as you type Script errors are displayed in the list at the bottom of the Script editor Set the Script Language in the Script Editor To set the script language in the Script Editor use the following procedure To set the script language in the Script Editor 1 Click Script Language to define the language for the current script T
133. ics Process Studio User Guide Form Task on page 77 231 232 Chapter 14 Process Studio Tutorial Configure Tasks on page 91 Configure General Properties on page 92 Configure a Form Task on page 113 Task Assignment on page 95 Search the APA Server on page 132 Configure the CFO Review Branch Task The next step in creating the purchase order process is to configure the tasks that follow the CFO Review task The CFO Review task is followed by a branch task The branch task executes a process path based on the submit action approve reject send for edit selected by the CFO This section of the tutorial describes how to m Add and Connect the CFO Review Branch Task m Configure the CFO Review Branch Task Add and Connect the CFO Review Branch Task Use the following procedure to add the branch task to the process and connect it to the other tasks To add and connect the branch task 1 2 3 Add a Branch task to the process template Connect the CFO Review task to the Branch task Add a new container task to the process template Name the container Rejected2 Connect the Branch task to its successor tasks a Connect the Branch task to the Needs Edits loop task b Connect the Branch task to the Accounting WQ Review form task c Connect the Branch task to the new container task TIP You might need to move some of the tasks on the template to see the paths clearl
134. idental Trademarks and Copyrights Copyright 2012 Autonomy Corporation plc and all its affiliates All rights reserved ACI API Alfresco Connector Arcpliance Autonomy Process Automation Autonomy Fetch for Siebel eBusiness Applications Autonomy Business Objects Connector Cognos Connector Confluence Connector ControlPoint DAH Digital Safe Connector DIH DISH DLH Documentum Connector DOH EAS Connector Ektron Connector Enterprise AWE eRoom Connector Exchange Connector FatWire Connector File System Connector for Netware File System Connector FileNet Connector FileNet P8 Connector FTP Fetch HTTP Connector Hummingbird DM Connector IAS IBM Content Manager Connector IBM Seedlist Connector IBM Workplace Fetch IDOL Server IDOL IDOLme iManage Fetch IMAP Connector Import Module iPlanet Connector KeyView KVS Connector Legato Connector LiquidOffice LiquidPDF LiveLink Web Content Management Connector MCMS Connector MediClaim Meridio Connector Meridio Moreover Fetch NNTP Connector Notes Connector Objective Connector OCS Connector ODBC Connector Omni Fetch SDK Open Text Connector Oracle Connector PCDocs Fetch PLC Connector POP3 Fetch Portal in a Box RecoFlex Retina SAP Fetch Schlumberger Fetch SharePoint 2003 Connector SharePoint 2007 Connector SharePoint 2010 Connector SharePoint Fetch SpeechPlugin Stellent Fetch TeleForm Tri CR Ultraseek Verity Profiler Verity VersiForm WebDAV Connector WorkSite
135. igned to users The assigned user is the person who is required to complete the action or work required by the task Users must also be assigned to Committee tasks as members of the committee A task can be assigned to a user directly or indirectly for example through a work queue or relationship Process Originator A task can be assigned to the Process Originator This is the user who initializes the process in the Portal or Web Desktop User or Work Queue A task can be assigned to a specific user or work queue A work queue is a group of users that can be assigned tasks A work queue has a common inbox and any member of the group can complete the tasks assigned to the queue Work queues are configured using the Management Console Performer of Another Task A task can be assigned to a user who performs another task in the process Relationship Relationships describe the connections between users in an organization Process Studio User Guide 95 96 Chapter 7 Configure Tasks Tasks can be assigned to a relationship For example a form can be routed to a user s manager rather than a specific user and the form is routed to the correct manager regardless of the user s identity Processes that assign events based on relationships are also easier to maintain because they are not affected by changes in an organization s hierarchy Relationships are configured in the Management Console For information about configurin
136. is starts the execution of the process instance After an instance is activated tasks are set to the Done or Active states Some tasks require manual input See Flow Simulation Commands on page 125 When the end task reaches the Done state the simulation is complete Duplicate an Instance Instances in Process Studio can be duplicated This is useful if you want to test a different flow on the same process for example testing various Branch paths The Duplicate Instance command duplicates the current instance in flow simulation mode Duplicating an instance puts the new instance in a Ready state The instance is duplicated but not executed To duplicate an instance 1 2 Click the instance in the Instances tab On the Run menu click Duplicate Instance Another version of the selected instance is created and appears in the Instances tab Delete an Instance To delete an instance use the following procedure To delete an instance 1 2 Click the instance in the Instances tab On the Edit menu click Delete Process Studio User Guide Flow Simulation Task states When a flow simulation is created the state of each Task in the simulation is displayed using colored circles on the Task Tasks can have the following states Task state Description Example Ready The task has not started eo Active The task has started but not completed e e Done The task has completed ee Abort The
137. ish the process to the APA server O To stop the publishing process click Cancel Roles Groups and Users The Role Group User names list shows the roles groups and users whose permissions can be configured It includes the Everyone and Anonymous roles by default m Everyone Any user who logs on to the APA Server m Anonymous Anyone who browses to the APA Server and does not log on E NOTE You should test your process before granting Anonymous or Everyone access permission Additional users can be added to the list Add a user or LDAP group To add a user or group to the Role Group User names list use the following procedure To add a User or Group 1 Click Add User Group The Search Users dialog box opens Process Studio User Guide Publishing Wizard Permissions 2 Search for or select any user or group See Search the APA Server on page 132 Click Add The user or group is displayed in the Selected Items list If required you can continue to add further users and groups Click OK The selected users are added to the Role Group User names list on the Permissions page Add a Role To add a role to the Role Group User names list use the following procedure To add a Role 1 Permissions Click Add Role The Search Roles dialog box opens Click a role in the list and click Add The role is displayed in the Selected Items list You can add further roles if required
138. istrator The Exception pattern is useful for implementing script error handling Related Topics m Exception Task on page 76 Task Patterns Process Studio includes many advanced Task Patterns in the Patterns drawer of the Task Library To add a pattern to your process template see Add a Task Pattern on page 82 The patterns described in this section are based on those by WMP van der Aalst A HM ter Hofstede B Kiepuszewski and A P Barros Workflow Patterns http www workflowpatterns com Sequence In a sequence a task must be completed before the following task becomes active Process Studio User Guide 157 158 Chapter 11 Task Patterns Parallel Split Tasks can be active in parallel at the same time This occurs when several tasks are initiated on completion of one task In the following example when task 1 is complete tasks 2 3 and 4 execute in parallel SE We Synchronization Synchronisation occurs when two or more tasks must be complete before another task can begin Synchronisation can be accomplished using an And task If you join multiple predecessor tasks to a single successor task as in the following diagram an And task is implied All of the predecessor tasks 2 3 and 4 must complete before the successor task 1 can start The successor task is only executed one time Process Studio User Guide Task Patterns If you want to connect multiple t
139. ivated if it is not assigned to a user select the Abort if Unassigned check box Clear this check box if you want the task to remain active but unassigned Process Studio User Guide 97 98 Chapter 7 Configure Tasks 6 Click OK Related Topics m Task Assignment on page 95 Configure Task specific Properties This section describes how to configure the properties that are specific to each type of process task E Configure a Sub Process Task E Configure a Committee Task E Configure an OR Task E Configure an E mail Task E Configure a Branch Task E Configure a Manual Task E Configure a Loop Task E Configure a Web Service Task E Configure a Delay Task E Configure a Form Task E Configure an Escalate Task E Configure a Form Copy Task E Configure a Script Task E Configure a Form Export Task E Configure a Command Task E Configure a Form Packet Task E Configure a Message Task Configure a Sub Process Task The sub process task embeds an existing process that has been published to the APA Server in the current process To configure a Sub Process task 1 Open the Sub Process Task Properties dialog box and click the Sub Process tab 2 Click Search The Search Process Template dialog box opens 3 Browse to or search for the process template you want to use in the sub process Click the process and then click OK For information about how to search the APA server see Search the APA Server on page 132
140. k Hide O To edit the properties of a form use the following steps i Select a nodes with an associated form and click Edit The General Information dialog box opens ii Configure the form options Process Studio User Guide 115 116 Chapter 7 Configure Tasks Allow Form to be Edited Initialize form at this Task Set Field Properties Customize Submit Action List Enable Form on Mobile Devices Automatically Display Next Form on Submit iii Click OK See Allow Form to be Edited on page 117 See Initialize Form at this Task on page 118 See Set Field Properties on page 117 See Customize Submit Action List on page 118 See Enable Form on Mobile devices on page 119 See Automatically Display Next Form on Submit on page 121 The General Information dialog box closes 4 Configure the following form options these options apply to all of the forms in the table of contents Allow Attachments to be Deleted Customize Submit Action List Allow Viewing of Progress Map Display page for Entering Subject and Notes Task Properties See Allow Attachments to be Deleted on page 118 See Customize Submit Action List on page 118 See Allow Viewing of Progress Map on page 121 See Display Page for Entering Subject and Notes on page 121 The following sections describe some common task properties Process Studio User Guide Task Propertie
141. k Queue NOTE Refer to the Management Console User Guide for more information about Work Queues 10 Click OK Publish the Purchase Order Form For the purposes of this tutorial a Purchase_Order form has already been published to the APA server and is available in the TutorialForms folder If the Purchase_Order form is not available a user assigned the Form Publisher role can publish it to the APA server To publish the Purchase_Order form 1 Open the Purchase_Order form in Form Designer This form is available in the Tutorial folder in the Form Designer directory default location c ProgramFiles Cardiff LiquidOffice FormDesigner Tutorial 2 On the File menu click Publish Process Studio User Guide 191 192 Chapter 13 Getting Started 3 4 Accept the default settings on the General Properties Permissions and Routing Settings pages of the Publishing Wizard dialog box On Data Exports page select the Export data using the My Data Client check box and accept the remaining default settings Click Finish and Done The form is published to the APA server Refer to the Form Designer User Guide or Management Console User Guide for more information about publishing forms to the APA server Process Studio User Guide CHAPTER 14 Process Studio Tutorial This section describes the steps to create a simple Purchase Order process template in Process Studio Before starting the tutorial ensure yo
142. ks Get Next Item in a Work Queue the higher priority tasks are displayed before the lower priority tasks Process Studio User Guide Task Assignment Abort if Unassigned Tasks can be configured to enter the Abort state once activated if they do not have an assignment If the task does not enter the Abort state it remains active but not assigned Unassigned tasks can be reassigned using the Process Activity page in the Management Console Configure Task Assignment To configure task assignment use the following procedure To configure task assignment 1 Click the Assignment tab 2 Click the appropriate assignment For more information about how tasks can be assigned see Task Assignment on page 95 D D D D D Process Originator User or Work Queue Performer of Another Task Relationship None 3 If you assign the form to a Relationship complete the following steps a click Browse The Search Users dialog box opens Click the relationship that you want to use and click OK Click one of the relationship types m Process Originator m User or Group m Performer of Another Task You might also need to select a user work queue or group Click Browse to search the APA server For information about how to search the APA server see Search the APA Server on page 132 4 Inthe Assignment Priority list click a priority Low Medium or High If you want the task to enter the Abort state once act
143. ks to the process To add successor tasks to the process 1 Add a Loop task another Branch task and a Container task to the process 2 Connect the Branch task to its successor tasks as shown in the following diagram To connect the Branch task drag the green connector from the right side of the branch task onto the loop task When you release the mouse button the path is drawn Repeat this process dragging the connector onto the second branch task and then the container task Process Studio User Guide Add a Branch Task and Successor Tasks Related Topics m Add a Task on page 81 m Connect a Branch Task on page 84 Configure the Branch Task Use the following procedure to configure the branch Task To configure the Branch Task 1 Double click the first Branch task 2 Click the Branch tab Process Studio User Guide gt 207 208 Chapter 14 Process Studio Tutorial 3 Branch 3 Ze General Branch Attributes Simulation Branch Paths Index Default Branch 5 Container 6 Choose Path Based On Default Path the default path can be changed dynamically from script Expression Another Task Supervisor Review 2 v Edit Mapping a v Select an optional alternate path if the chosen path does not exist In the Branch Paths area the successor tasks are assigned Index values If the path Index
144. l 6 Select the Purchase Order form in the TutorialForms folder and click OK 7 Select the following check boxes Process Studio User Guide Configure the CFO Review Task Allow Form to be Edited Allow Attachments to be Deleted Allow Viewing of Progress Map Display Page for Entering Subject and Notes DD DD a Automatically Display Next Form on Submit 8 Select the Set Field Properties check box and click Edit The Edit Fields dialog box opens The list of fields in this dialog box is built dynamically from the APA server Edit Fields Field ID Required Read only Hidden Namespace Storage N AcctWOQSignature EI lt AcctWOQSig Button2 Button2 EI DEPT DEPT Properties DESC1 DESC10 DESC11 DESC12 DESC2 DESCH DESCH DESCH DESC6 DESC JE DESC1 C Required DESC10 DESC11 DESC12 DESC2 C Hidden DESCH DESCH DESCH DESC6 DESC KA KIKA KKA KA KAEA KAES Oo0o00000 HSSSISISISISIR 9 Get al of the fields except CFOSignature to Read Only Select all of the fields except CrOSignature and select the Read only check box in the Properties area 10 Click OK 11 Select the Customize Submit Action List check box and click Edit The Submit Action dialog box opens Process Studio User Guide 225 Chapter 14 Process Studio Tutorial gt Submit Action Type Display Name Value Reject N
145. lete a Field from the Process Definition ccccceceececcceeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeteees 54 Data Types for Process Fields Abu 54 Configure Initial Form Properties cccccccceecesceceeeeeceeeececeeeseecaeeeseecaeeeseccaeeeseecieeeeeeneeeeeeaaes 56 el Me TE 57 Create and Configure a New Form Packet ccccccceceseeeeesecceeeeseeeaeeeeeeeeeeeseneeeeeseeeeeeeaeees 57 Delet eva Form Packet ease S csnceteiiceaavvelence r a a aai 59 Formi Packet RUIS a sscicsssacacebwtaseanceteacedeawawatndalitasnenetneamndcnnadan aditsaaed cenmcededanaadauctneadbbabmambadectadeneswaeatl 59 Oredo a FUNG ee ee EE 61 Configure the Set Node State Consequence cceeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeneeeeeeaaeeeeneaaees 63 Configure the Set Message in TOC Consequence cccceeeeeccceeeeeeeeennneeeeeeeesesseeeeeeeeeneeees 64 Configure the Add Form Consequence c scceeeeceeeeeeeceeeeeecaeeeeecaeeeeeeceeeeseseneeeeeseeeeeeeeaaes 65 Configure the Duplicate Node Consequence cccceeeceeeeeeeeeeeeeeeeeeeeeeeeeeeeeeteneeeeeseeeeeenenees 66 Configure the Remove Nodes Consequence eccceeceeeeeeeeeeeeeeeceeeeeeeeeeeeeeseeeeeeseaeeeeesaaeees 67 Configure the Chain to Specific Node Consequence ccscccccecceeeeeneneeeeeeeeesesseneeeeeeeeeeeaes 68 Chapter 5 ASUS e TT 69 Tasks OVGIVICW ueil aar EEE EAE EEEE NEE TEN AECE EEOAE EAEAN 69 Process Control Tasks edinen ar a EE TEE EERE 72 Container E E EE
146. ly permission allowable for LDAP groups and 7 Anonymous is Access The remaining permissions require a user ID on the APA Server Precedence of Form Tasks and Process Permissions The Manage Process and View All Process Data permissions can apply to either a form task or a process If a form task is associated with a process both Manage Process and View All Process Data permissions set on the process take precedence over the permissions set on the form Process Studio User Guide Publishing Wizard Process Settings Publishing Wizard Process Settings The Publishing Wizard displays the Process page V i Publishing Wizard F Process Properties C Allow Originator to View Progress Map C Allow Originator to Withdraw Finis cancel _ To configure Process settings 1 Process Studio User Guide To allow the process originator to view the progress map for the process select the Allow Originator to View Progress Map check box The progress map is viewed from the Sent Items folder in the Portal or Web Desktop The progress map shows a live picture indicating the current state of the process and tasks To allow the process originator to withdraw a form select the Allow Originator to Withdraw check box Forms can be withdrawn from the Sent Items folder in the Portal or Web Desktop Withdrawing a form removes it from the approval process Click Finish A dialog box opens confirming that the pr
147. m only sign it m customize the submit actions available on the form Custom submit actions allow the CFO to choose what to do with the form approve it reject it or return it to the originator for editing m configure the form to display a notes page on submission The CFO can then type notes to explain why the form has been rejected or returned for editing To configure the CFO Review Form task 1 Double click the CFO Review task to edit its properties The task has already been named 2 Inthe Duration box type 0 00 05 00 000 5 minutes Process Studio User Guide 223 224 Chapter 14 Process Studio Tutorial 3 Inthe Design Comments box type a suitable description to explain the purpose of the task 4 Click the Form tab 3 CFO Review 7 TEE General Form Assignment Attributes Simulation Select Form TutorialForms Purchase_Order Allow Form to be Edited Set Field Properties Allow Attachments to be Deleted Initialize Form at this Task D first el Customize Submit Action List Enable Form on Mobile Devices Use Form Defa Allow viewing of Progress Map Display Page For Entering Subject and Notes C Represent Static Table Cells as Top Level Fields 5 Click Search The Search Forms dialog box is displayed Search Forms Search for l Location EE E in Everywhere 0 amp 2 1 Public 2 a Reports 3 i TutorialForms Cance
148. m The server starts the process immediately before displaying the initial form D instantiate Process After Submitting Form If you select this option the following occurs m The APA Server launches the form specified in the selected Initial Task list but does not start a new process m As the process has not been created there are no process script entry points available to perform setup for the initial form task The form and initial task script entry points are executed as with any other form task m The process Progress Map and History screen in the APA Portal and APA Web Desktop are not available until after the process starts m The form may be saved for later and used to launch a process at a later time after it is submitted 3 Inthe Initial Task list click an initial task The Initial task is the task in the process that should be executed first Process Studio User Guide Form Packets a NOTE To define a Form Packet as an Initial Task you y must click Instantiate Process Before Displaying form If the process is instantiated before the form is displayed any Form task in the process that is assigned to Originator can be used If the process is instantiated after the form is displayed the task and all of its parent tasks must not have any predecessor tasks Published processes that have an Initial Task selected display form icons HTML PDF in the Portal and Web Desktop rather than the process icon normall
149. mail task is used to send an e mail message To configure an E mail Task 1 2 O gl cow Open the E mail Properties dialog box and click the E mail tab In the From box type an e mail address This is the address the e mail will appear to be sent from In the To box type an e mail address The e mail is sent to this address If required type e mail addresses in the Cc and Bcc boxes In the Subject box type a subject for the e mail Type the e mail message TIP You can provide multiple e mail addresses in the To e Cc and Bcc boxes Separate the addresses using commas TIP You can use substitution syntax to create dynamic values See Create Dynamic Values Using Substitution Syntax on page 34 Configure a Manual Task The Manual task represents a manual step in a process To configure a Message task 1 2 Process Studio User Guide Open the Manual Properties dialog box and click the Manual tab Configure the message sent to the assigned user s APA inbox O To send the user a web link click Web Link and type a URL in the box Substitution syntax can be used See Create Dynamic Values Using Substitution Syntax on page 34 107 Chapter 7 Configure Tasks O To send the user text instructions click Instructions and type a message in the box Substitution syntax can be used See Create Dynamic Values Using Substitution Syntax on page 34 3 Select or clear the Allow Viewing of P
150. ment Configure Task specific Properties c ccecceeeeceeeeeneeeseceeeeeenaeeeseeeeeeeneaas Configure a Sub Process Task ccecccseeeeeeeeeeeeeeeeeeeeeeeeeeeeseeeeessnaaeees Configure an OR Task cccccccceeeeeeceeeeeeeceeeeeecaeeeeeecaeeeescneeeseseneeeeeseaeees Configure a Branch Task eccccececseeeeeeeceeeeeeeeeeeeeeeeeeeeeeeaeeeeeseaeeeeeeeaeees Use Another Task to Determine Path Selection n Configure a Loop Task ccccsceceeeseeeeeeeceeeeeeceeeeeeceeeeeseeeeeeeseneeeeseeaeees Use Another Task to Control Loop Execution Configure a Delay Task ccccccceeeceeeececeneeeeeeeeeeeeeeeeeeeseaeeeeeseeeeeeteaeees Configure an Escalate Task 0 ccccccceceeceeeeeeeeeeeeeeeeeeeeeeneeeesseeeeeeeenaeees Configure a Script ask siccs vctandevevcten Sebbvearluesdydgbbveisiaevde eievelaiyceaceb tists Configure a Command Task ccccccccceeceeeeeeeeeeeeeeeeeeeeeeeeeeeeeseneeeeeeeaeees Configure a Message Task cccccsceeeecceeeeceeceeeeseeceeeeeceeeeeeseeeeeeeeeneees Configure a Committee Task cccccccesseeeeeeeceeeeeeeeeeeeeeeeeeeeeseeeeeetenees Configure an E mail Task eccccececseeececceeeeeeecaeeeseceeeeeeeeeeeeseeneeeeeteaees Configure a Manual Task ccccceceeeeeceeeeeeeeneeeeeeceeeeeeeeeeeseeaeeeeeeaeees Configure a Web Service Task c cccccecceeeeeeeceeeeeeeceeeeeeeeeeeeeeneeeeeeennees Configure a Form Task ccecccceceeeceeeeeeeceeeeeeceeeeee
151. n all exports defined on the APA Server for a specific form To configure a Form Copy task 1 Open the Form Export Properties dialog box and click the Form Export tab 2 To select a form click Search The Search Forms dialog box opens 3 Browse to or search for a form Click the form and then click OK For information about how to search the APA server see Search the APA Server on page 132 4 Select or clear the following check boxes O Represent Static Table Cells as Top Level Fields See Represent Static Table Cells as Top Level Fields on page 121 Configure a Form Packet Task The Form Packet task is used to associate a Packet with a Task Process Studio User Guide Configure Task specific Properties To configure a Form Packet task 1 Open the Form Packet Properties dialog box and click the Form Packet tab Form Packet 1 General Form Packet Assignment Attributes Select Packet Credit Card Application Table OF Contents 2 Cardholder Information S O Primary Cardholder General Information ion C Customize Submit Action List C Allow viewing of Progress Map C Display Page For Entering Subject and Notes 2 Inthe Select Packet list click a Packet to associate with the task 3 Inthe Table of Contents area configure the form packet task O To show a form select a form in the table of contents and click Show O To hide a form select a form in the table of contents and clic
152. nctions lean true lean false Function dat e today number year date d number month date d number day date d Time Functions Function tim num num num Process Studio User Guide e now ber hour time t ber minute time t ber second time t Description Returns the Boolean value t rue Returns the Boolean value false lean not boolean b Returns the logical negation of b not evaluates to true if and only if bis false Takes a single Boolean operand The operand is implicitly converted to a Boolean as if by a call to Boolean Description Returns the current date Returns a number representing the year component of a Returns a number representing the month component of d Returns a number representing the day component of d Description Returns the current time Returns a number representing the hour component of t 0 23 Returns a number representing the minutes component of t 0 59 Returns a number representing the seconds component of t 0 59 181 182 Chapter 12 APA Expression Language String Functions Function number length string S string trim string S string normalize space string S string left string S number N string right string S number Ni string substring string S number start number count string upper string S string lower string S string concat string string boolean contains stri
153. nfigure the Add Form Consequence The Add Form consequence adds a form to the form packet e Add Form 5 4 Credit Card Application New node Cardholder information Parent path Credit Report Information Decision Summary New node name Form path Form properties Edit form properties To configure the Add Form consequence 1 Choose the parent path of the new node a Inthe list click the node that should contain the new form b Click Set Parent Path In the New node name box type a name for the new node In the Form path area specify the form that should be added to the packet You can either type the path of a form or use the following steps a Click Form Properties A dialog box opens b Click Search and select a form from the APA server Process Studio User Guide 65 Chapter 4 Configure a Process c Click OK 4 If you want to edit the properties of the form click Edit form properties For information about each property see the following topics O Allow Form to be Edited on page 117 Initialize Form at this Task on page 118 Set Field Properties on page 117 Customize Submit Action List on page 118 DD DD Enable Form on Mobile devices on page 119 O Automatically Display Next Form on Submit on page 121 5 Click OK Related Topics m Create a Rule on page 61 Configure the Duplicate Node Consequence The Dupl
154. ng str string sub boolean starts with string str string prefix string substring before string str string sub string substring after string str string sub Description Returns the length number of characters of s Removes leading and trailing white space from s S itself is not modified Removes leading and trailing white space from s and replaces sequences of space characters with single space characters s itself is not modified Returns the first N characters from s s itself is not modified Returns the last N characters from s s itself is not modified Returns count characters starting at position startin S S itself is not modified Converts s to upper case s itself is not modified Converts s to lower case s itself is not modified Returns a string produced by concatenating the arguments May take wildcard field references Returns true if str contains sub and otherwise returns false Returns true if str starts with prefix and otherwise returns false Returns the substring of st r that precedes the first occurrence of subin str or an empty string if str does not contain sub For example substring before 1999 04 01 returns 1999 Returns the substring of str that follows the first occurrence of subin str or an empty string if str does not contain sub For example substring after 1999 04 o1 returns 04 01 and substring after 1999 04 01 19 returns
155. ng to CFO Review task is assigned a value of 0 This path is selected if the expression evaluates to False The branch path pointing to Accounting WQ Review task has a value of 1 This path is taken if the expression evaluates to True Therefore the expression must evaluate to True when the Total field is less than 10 000 This section of the tutorial describes how to m Configure the second Branch Task Configure the second Branch Task Use the following procedure to configure the branch task To configure the second Branch task 1 Before a Branch task can be configured you must create its successor tasks Add two Form tasks to the process template Process Studio User Guide Define the Approved Path Using an Expression 2 Connect the second branch task to the Form tasks as shown in the following diagram eee Needs Edits 3 Rename the Form tasks a Double click the Form task connected to path 0 and rename it to CFO Review Click OK b Double click Form task connected to path 1 and rename it to Accounting WQ Review Click OK Double click the second Branch task to edit its properties In the Name box type Approved1 The Duration is automatically set to 0 00 00 01 000 1 second 6 Click the Branch tab Process Studio User Guide 214 Chapter 14 Process Studio Tutorial Ta 8 Branch 5 General Branch Attributes Simulation Index Task Default 0 CFOReview 7
156. nssrnnssrrnns 232 Configure the CFO Review Branch Task 233 Configure the Accounting Review Branch Task 0 c ccccceeceeeceeceeeeeeeeeeeeeecaeeeeeeceeeeeeceeeeeteaeees 235 Add and Connect the Accounting Review Branch Task cccccssseeeeseseeeeeteeteeeessaeeeees 236 Configure the Accounting Review Branch Task c cccccecceseeeeeeeeeneeeeeeeeeeeeeeeeeeeeeeaeeees 237 Configure the Rejected2 Container cccccecccsseceeeeecceeeeeecaeeeeecaaeeeeccaeeeeeecaeeeetecueeeseeeieeeneenaes 238 Configure the Rejected2 Container Task c ccccceceeeeeeneeeeeeeneeeeeeeaeeeeesaaeeeessaeeeeessaaeees 239 Add Tasks to the Container c ccccccesceeeeeeneeeeeeaeeeeeeaaeeeeceaaaeeeeeaaaeeeeceaaaeeeseaaeeesecaaeeseeaas 239 Send a Copy of the Form to the Supervisor cccccceeeceeeeeeseeeeeeeeeeeeeeeeaeeeeeeeaeeeeseiaaeeees 240 Configure the Approved Container ccccccceecseeceeeeceneeeeeeeaeeeeccaeeeseccaeeeseccaeeeseeceeestecieeeenenees 244 Configure the Approved Container 0 cccccceeeceeeeeeeeneeeeeeeeeeeeeeeeeeeeseeeeeeeseaeeeeeeeeeeeeeeeeeens 244 MAER cc he ei enna cena ate Sociales Reese eee ee setae 245 Process Studio User Guide About This Document This document is for users who need to create processes with Autonomy Process Automation APA Process Studio m Documentation Updates m Related Documentation m Conventions m Autonomy Product References m Autonomy Customer Support
157. nt of time To connect an Escalate task you must draw the path from the escalate task towards the target task To connect an Escalate task m Drag the pink connector from the left side of the escalate task onto the target task TIP If the path is drawn correctly it is displayed in pink with arrows pointing in both directions Related Topics m Escalate Task on page 75 86 Process Studio User Guide Save a Composite Task Remove a Connection To delete a connection between two tasks use the following procedure To 1 2 remove a connection Click the connection Press DELETE Rel E ated Topics Connect Tasks on page 83 Save a Composite Task If you regularly use a group of tasks in Process Studio you can save them as a Composite task to be used in future processes The Composite task is a new task in which tasks are defined under a single name To create a composite task 1 Process Studio User Guide Add the tasks you want to combine to the Graphical View For example your company performs the same tasks every time a form is approved by the Accounting Department Add these tasks to the process template and connect them Select the tasks by dragging the bounding outline around the tasks Copy the tasks to the clipboard D On the Edit menu click Copy O Click Copy E O Right click the selected tasks and click Copy D Press CTRL C On the Tools menu click Options The O
158. o edit the default settings for the form use the Management Console Configure the form fields to display on mobile devices To configure how form fields are displayed on mobile devices use the following procedure Set up the form fields to display on mobile devices 1 Click Edit The Mobile Properties dialog box opens 2 Inthe Form Fields list select the fields that you want to display on mobile devices and click The selected form fields are moved to the Mobile Display list 3 Inthe Mobile Display list select any form fields that you do not want to display on mobile devices and click lial The selected form fields are moved to the Form Fields list 4 The form fields are displayed on the mobile device in the order they are displayed in the Mobile Display list To reorganize the fields use the move buttons Move the selected fields to the top of the display order Move the selected fields up the display order v Move the selected fields down the display order 4 Move the selected fields to the bottom of the display order 5 Click OK Process Studio User Guide Task Properties Allow Viewing of Progress Map To allow users at the selected process step to view the progress map in the APA Portal or APA Web Desktop select the Allow Viewing of Progress Map check box This option is available for Form Form Copy Message and Manual tasks Display Page for Entering Subject and Notes After a form is submitted an
159. ocess Template and Add Tasks ccccccececceeeeeeeeeeeeeeeeaeeeeeseaeeeeesaeeeeesaaeeessnaaeees 194 Create a New Process Template cc ccceceseeceeeeeeeeeeeeaeeeeeeeaeeeeseaaaeeeseaaaeeeseaaaestecaeeeeneeas 194 Add a Form Task to the Template oc eceecceeeeeeeeeeeeneeee naaa Ta AE EENAA NERENS 195 Configure the Form Task 2 0 cc8 ieee EEN dE 195 Save the Process Template cccccceceeeeeeeeeeeeeeeeeneeeeeeeaeeeeeeeaeeeeseaaaeeeseaaaeeeseaaeeseeiaeeeeee 198 Create the Supervisor Review ccccccceeeeeeeeeeeeeeeceeeaeeeeeceeeeeeseaeeeeeseeeeesgeeeeeseseeeeeeeseaeeeessaeees 199 Add a Second Form Task to the Process Template ccccsccceeseecceeeeeceeeeeseneeeeeeeeeeeeees 199 Configure the Second Form Task cccceeeeeeeeeeeeeeeeeeeeeeeeeeeaaeeeeesaaaeeeesaaeeeeseaaeeseenaeeeeeeeas 200 Assign the Form Task Using a Relationship 0 0 0 ceeeeeeeeeeeeeeeeenaeeeeeeeeeeeeaaaeeeeeeeeeeenaaaees 204 Add a Branch Task and Successor Tasks cccccceeceeeeeeseeeeeeeeeeeeeeeeeeeeeeseeeeeeeseaeeeeseeaaeeessnaaeees 205 Add a Branch Task to the Process ceeceeeeeeeee eee eeeeeeeae eter ee eeeeeaaaaeeeeeeeeeeeeaaaeeeeeeeeeeenaaaees 206 Add Successor Tasks to the Branch Task ccccescceceeeeeeeeeeceeeeeseaeeeeeeaaeeesetaaeeteenaeeetees 206 Configure the Branch Task cccccscceccssecceeeeeneeeeeeaaeeeecaeeeeecaaeeeeecaaeeesecaeeeseccaeeseeneeeeteeanes 207 Configure the Loop Task
160. ocess has been published to the APA server 145 146 Chapter 10 Publish a Process 4 Click Open to launch the process or click Close to close the Publishing Wizard Initiate a Process Initiating a process creates an instance of a process template on the APA Server You can not initiate a process until the process has been published to the APA Server Processes coexist with published forms and external documents in the Folders repository of the APA Server You can access these published processes using the APA Portal or Web Desktop To initiate a Process from APA Portal 1 2 3 Log on to the Portal Refer to the APA Portal User Guide for more information In the Navigation area click Folders Navigate to the process you want to initiate and click the process name The applicable form is displayed or the following message is displayed A new instance of process lt process_name gt has been initiated Complete the form or click Close Window Initiate a Process from the Web Desktop To initiate a process using the Web Desktop use the following procedure To initiate a Process from the Web Desktop 1 Log on to the Web Desktop Refer to the Web Desktop User Guide for more information Click the Folders tab Navigate to the process you want to initiate and click the process name The applicable form is displayed or the following message is displayed A new instance of process lt process_name gt has been
161. ocument titles and new terms For example E For more information see the DOL Server Administration Guide E An action command is a request such as a query or indexing instruction sent to IDOL Server monospace font File names paths and code For example The FileSystemConnector cfg file is installed in C Program Files FileSystemConnector monospace bold Data typed by the user For example m Type run at the command prompt m Inthe User Name field type Admin monospace italics Replaceable strings in file paths and code For example user UserName Process Studio User Guide 15 16 About This Document Command line Syntax Conventions This document uses the following command line syntax conventions Convention Usage optional Brackets describe optional syntax For example create Bars indicate either or choices For example optionl option2 In this example you must choose between option1l and option2 required Braces describe required syntax in which you have a choice and that at least one choice is required For example optionl option2 In this example you must choose optionl option2 or both options required Absence of braces or brackets indicates required syntax in which there is no choice you must type the required syntax element variable lt variable gt Italics specify item
162. of the fields except Acct WOSignature to Read Only To do this highlight the fields in the table and select the Read only check box Click OK Select the Customize Submit Action List check box and click Edit The Submit Action dialog box opens Submit Action Type Reject Display Name Value Needs Edits Submit Approved Reject Rejected Configure the custom submit actions for the form as shown in the preceding image Click Add to add custom submit actions Double click a cell to type or select a value Click OK Click the Assignment tab Process Studio User Guide Configure the Accounting Work Queue Review Task 15 Click User or Work Queue and click Browse Accounting WQ Review 8 General Form Assignment Attributes Simulation Process Originator User or Work Queue Tutorial_Accounting Performer of Another Task Relationship Process Originator User or Group Performer of Anot None C Abort if Unassigned Assignment Priority Normal ze Fill and Submit 1 Browse Browse The Search Users dialog box opens Search Users Search for Everywhere Contains Location 41 CIW A Administrator 16 Click the Tutorial Accounting Work Queue and click OK 17 18 Click OK Save the process Related Top
163. onfigure a Committee Task 1 Open the Committee Properties dialog box and click the Committee tab The Members area is used to define the members of the committee To add a member to the committee click Add The Add member dialog box opens a Select a user to add to the committee m To add the Process Originator click Process Originator m To add a specific user or work queue click User or Work Queue and click Browse m To add the performer of another task to the committee click Performer of Another Task and click a task in the list m To define a committee member using a relationship click Relationship and then click one of the relationship types b Click OK To add multiple users to the committee in a single operation click Add Multiple The Search Users dialog box opens See Search the APA Server on page 132 To edit an existing committee member click a name in the Members list and click Edit Process Studio User Guide Configure Task specific Properties 5 To remove an existing committee member click a name in the Members list and click Remove In the Criteria area click one of the approval criteria If you click Minimum number to approve or Minimum percent to approve you must also type a value Click the Form tab and configure the Form that is submitted to the committee For more information about form options see Configure a Form Task on page 113 Configure an E mail Task The E
164. or tasks to be complete before the process can proceed In the following example tasks A and B must complete before task C can begin Related Topics m And Task on page 72 m Join on page 154 Process Studio User Guide 155 Chapter 11 Task Patterns Or Escalate The Or pattern requires only one of its predecessor tasks to complete before its successor task can start In the following example as soon as either task A or B is complete task C begins This pattern is created using an OR task Related Topics m Or Task on page 73 The Escalate pattern is used to ensure that important tasks are completed The Escalate task provides a secondary process path that is used if a task is not completed within a fixed amount of time In the following example if the Form task does not complete within the delay time specified in the Escalate task the Escalate path is used The E Mail task becomes active and an e mail is sent to remind the relevant user to complete the form Related Topics m Escalate Task on page 75 Process Studio User Guide Task Patterns Exception The Exception pattern is used to handle errors in a process The Exception pattern provides a secondary path that is used if a task enters the Aborted state In the following example if the Form task fails the Exception path is used The E Mail task becomes active and an e mail is sent for example to an admin
165. orialForms Cancel 7 Select the Purchase_Order form in the TutorialForms folder and click OK Select the Allow Form to be Edited check box Click the Assignment tab Process Studio User Guide 197 198 Chapter 14 Process Studio Tutorial Form Fill and Submit 1 General Form Assignment Attributes Simulation iginator User or Work Queue Performer of Another Task Relationship Performer ol O None Assignment Priority No wi C Abort if Unassigned 10 Click Process Originator 11 Click OK Related Topics m Configure Tasks on page 91 m Configure General Properties on page 92 m Configure a Form Task on page 113 m Task Assignment on page 95 Save the Process Template Use the following procedure to save the process template To save the process template m On the File menu click Save Related Topics m Save a Process on page 48 Process Studio User Guide Create the Supervisor Review Create the Supervisor Review The second task in the Purchase Order process is a Form task This task is assigned to the process originator s supervisor The supervisor receives the completed Purchase Order form in their Inbox The supervisor reviews the form and signs it They can then choose to approve the form reject it or send it back to the originator to be edited This section of the tutorial describes how to m Add a Secon
166. ouble click the Branch task to edit its properties 2 Click the Branch tab Branch 16 General Branch attributes Simulation Branch Paths Index Default nw Needs Edits 4 Approved 17 Rejected2 12 Move Down Choose Path Based On Default Path the default path can be changed dynamically from script O Expression Another Task Xsan Riven stim eats v Edit Mapping a Select an optional alternate path if the chosen path does not exist 3 Inthe Branch Paths area the Needs Edits Approved and Rejected2 tasks are assigned Index values These values are used to map the Branch paths to the Accounting WQ review task output If the path Index values for your branch task do not match those shown in the preceding image select a row in the Branch Paths table and click Move Up or Move Down 4 The Branch task should choose a path based on the submit action chosen by the CFO In the Choose Path Based On area click Another Task Process Studio User Guide nN D I 238 Chapter 14 Process Studio Tutorial 5 Inthe Another Task list click the CFO Review task 6 Click Edit Mapping The Branch Mapping dialog box opens Branch Mapping Task Output Branch Path O Needs Edits 4 1 Approved 17 2 2 Rejected2 12 7 Click New three times to add new branch mapping entries to the list 8 Configure the Task Output and Branch P
167. pervisor Tutorial_Supervisor Cancel Click the Tutorial_Supervisor Relationship and click OK Click the Process Originator relationship type The task is assigned to the supervisor of the process originator 6 Click OK The process should look similar to the following diagram 1 Form Fill and s Submit j Related Topics m Task Assignment on page 95 m Search the APA Server on page 132 Add a Branch Task and Successor Tasks After the Supervisor Review form task a branch task is used to select a process path based on the action selected by the supervisor This section of the tutorial describes how to m Add a Branch Task to the Process m Add Successor Tasks to the Branch Task m Configure the Branch Task Process Studio User Guide 205 206 Chapter 14 Process Studio Tutorial Add a Branch Task to the Process Use the following procedure to add a branch task to the process To add the Branch task 1 Add a Branch task to the process drag a branch task from the Task Library onto the Graphical View 2 Connect the Supervisor Review task to the Branch task Drag the connector on the right side of the Supervisor Review task onto the Branch task ER i Related Topics m Add a Task on page 81 m Branch Task on page 74 m Connect Tasks on page 83 Add Successor Tasks to the Branch Task Before the Branch Task can be configured you must add its successor tas
168. played as a part of the SOAP request in the Request tab If the WSDL defines a SOAP header it can be included as a part of the SOAP request 9 To send the request to the server and retrieve the response click Invoke 10 To view the response in XML format click View XML Response lt Password rz lt RegisteredUser gt lt Licenselnfo gt lt soapenv Header gt lt soapenv Body gt lt BusinessProspect xmins http www strikeiron com gt lt company gt lt DUNSNumber gt lt CompanyName gt lt Address gt lt City gt lt State gt lt PostalCode gt lt Phone zz lt company gt lt countryCode gt confidence gt lt BusinessProspect gt ok Cancel 110 Process Studio User Guide Configure Task specific Properties 11 12 Process Studio User Guide Select the Invoke in Simulation check box to execute the Web service task during Flow Simulations To modify array list handling click an array in the Request tab O To add additional children up to the amount specified by the WSDL click Insert This also allows children to be inserted at arbitrary locations within the list by selecting a child node and clicking Insert This will cause the new node to be inserted beneath the selected node O Click Remove to remove the selected rows To load the web service results into a process attribute or field click the Response tab Request Response XPath Expression
169. pplied Profile field values are applied to any relevant fields that are still blank Static initial values from the form definition are applied to any fields that are still blank Any remaining initializations including lookups and script are applied normally Process field property settings read only required and hidden are applied These are set in Form Designer and can be edited in Process Studio Process Studio User Guide PART 3 Process Studio Reference This section provides reference information for Process Studio m Task Patterns m APA Expression Language Part 3 Process Studio Reference 150 Process Studio User Guide CHAPTER 11 Task Patterns Task Patterns are groups of tasks that can be used to accomplish a specific function in a process m Simple Design Patterns m Task Patterns Simple Design Patterns This section demonstrates some simple design patterns Sequence When tasks are connected in sequence a task must complete before its successor task can start Process Studio User Guide 151 Chapter 11 Task Patterns Parallelism Sometimes several tasks can be active in parallel at the same time This occurs when a task has more than one successor In the following example when the Form task completes the Form Copy Form Export and E mail tasks are executed in parallel css Ee Tasks can also execute in parallel without a split If you have multiple tasks with no pr
170. ptions dialog box opens Click the Gallery tab In the tasks list click the Other tab Drag Composite to the drawer where you want to locate the new Composite task for example the Favorites drawer The Composite Task Configuration dialog box opens In the Label box type a name for the Composite task 87 88 Chapter 6 Add and Connect Tasks 9 Inthe Icon box you can specify a path for an icon to represent the task 10 Click Paste from clipboard The XML for the tasks that you copied is pasted into the XML box 11 Click OK The Composite task appears in the Task Library and can be used to create future processes Related Topics m Add a Task on page 81 Delete a Task To delete a task or object from the process template use the Delete command Ki NOTE You cannot delete an object from an Instance Tasks must be deleted from the Process Template To delete an object 1 Select the object 2 Use the delete command D D D D On the Edit menu click Delete Click Delete A Press DELETE Right click an object and click Delete Related Topics m Add a Task on page 81 m Convert a Task to another Type on page 88 Convert a Task to another Type To change the type of a task use the Change Type command Process Studio User Guide Add a Comment to a Process 5 NOTE You cannot change the type of a task in an Instance y The type of a task can only be modified
171. put NOTE Custom submit actions can be used You must select the value of the custom submit action in the Task Lag Output box Only Submit or Reject submit action types can be selected b Inthe Branch Path cell type or select the branch path that should be chosen if the submit action in the Task Output column is selected 5 To delete a submit action from the Task Output list click the row and click Delete 6 Click OK Configure a Loop Task The Loop task is used to return the process to an earlier task To configure a Loop task 1 Open the Loop Task Properties dialog box and click the Loop tab 2 Click True or False to select a default value A default value of True indicates that the loop should continue A default value of False indicates that the loop should terminate 3 Inthe Follow Path Based On area click one of the options to choose how the loop is controlled Default Value or Script A default value determines whether the loop continues or terminates The default value can be changed using script Expression An expression determines whether the loop continues or terminates Click Edit to open the Expression Builder For more information about the Expression builder see Build Expressions on page 32 For information about the Expression Language see APA Expression Language on page 171 Another Task The submit action of a submitted form determines whether the loop continues or terminate
172. r Process Studio User Guide gt Form Copy Supervisor 15 General Form Copy Assignment attributes Simulation Process Originator User or Work Queue Performer of Another Task Relationship Tutorial_Supervisor lt tutorial_supervisor gt Process Originator User or Group Performer of Another Task O None Assignment Priority Normal Di 10 Click Relationship 11 Click the Process Originator relationship option 12 Click Browse The Search Users dialog box opens Search Users Search For E Location ai CR Ee 1 SB Tutorial CEO Tutorial_CFO 2 C Tutorial_Supervisor Tutorial_Supervisor lin Everywhere v Contains 13 Click the Tutorial_Supervisor Relationship and click OK 14 Click OK 15 Click Parent level to return to the parent process template Alternatively double click Purchase_Order_Process in the Process Tree 243 244 Chapter 14 Process Studio Tutorial 16 Save the process Related Topics m Form Copy Task on page 77 m Configure General Properties on page 92 m Configure a Form Copy Task on page 114 m Task Assignment on page 95 m Search the APA Server on page 132 Configure the Approved Container The Approved container task is executed if the Accounting Work Queue approves the purchase order This is the final approval that is required This section of the tutorial
173. r further editing the Needs Edits loop task executes Process Studio User Guide Chapter 14 Process Studio Tutorial This section of the tutorial describes how to m Add and Connect the Accounting Review Branch Task m Configure the Accounting Review Branch Task Add and Connect the Accounting Review Branch Task Use this procedure to add the Accounting WQ Review branch task To add and connect the branch task 1 2 3 4 Add a Branch task to the template Connect the Accounting WQ Review task to the Branch task Add a Container task to the process template Name the container Approved Connect the Branch task to its successor tasks a Connect the Branch task to the Needs Edits Loop task b Connect the Branch task to the Approved Container task c Connect the Branch task to the Reject ed2 Container task TIP You might need to move some of the tasks on the template to see the paths clearly The process should now look similar to the following diagram N Ga OH e eeeee ef e e 2 Process Studio User Guide Configure the Accounting Review Branch Task Related Topics m Branch Task on page 74 m Add a Task on page 81 m Connect a Branch Task on page 84 Configure the Accounting Review Branch Task Use this procedure to configure the Accounting WQ Review branch task To configure the branch task 1 D
174. r 8 Simulate a Process To stop the process execution at the current point change the state of the Active task to Abort To change the state of a task m Select the task and click Run gt Set Done or Run gt Abort m Right click the task and click Set Done or Abort Change the State of Aborted Tasks To change the state of an aborted task and continue the simulation use the following commands An aborted task can be forced to the Ready Active Done or Passive state To change the state of an aborted task H Select the task and click Run gt Force State Then click one of the task states m Right click the task and click Force State Then click one of the task states Cancel a Task To cancel a task and change its state to Passive use the following commands To cancel a task H Select the task and click Run gt Cancel m Right click the task and click Cancel Open a Gate Task The Gate task prevents execution of its successor tasks based on an arbitrary condition When the gate is opened the successor tasks can execute Gate tasks in process instances on the APA server are opened programmatically When the gate is open its successor tasks can execute To open a gate task in a flow simulation m Right click the gate task and click Open Gate Process Studio User Guide Load Simulation Load Simulation A load simulation is used during the process design phase to analyze how a process might respond when deploy
175. r more of the categories in the Filter By pane You can restrict results by O Product Group Filters the list by product suite or division For example you could retrieve documents related to the iManage IDOL Virage or KeyView product suites O Product Filters the list by product For example you could retrieve documents related to IDOL Server Virage Videologger or KeyView Filter D Component Filters the list by a product s components For example you could retrieve documents related to the Content or Category component in IDOL O Version Filters the list by product or component version number O Type Filters the list by document format For example you could retrieve documents in PDF or HTML format Guides are typically provided in both PDF and HTML format To open a document click its title in the results list To download a PDF version of a guide open the PDF version click the Save icon kl in the PDF reader and save the PDF to another location Related Documentation The following documents provide more details on Process Studio m Autonomy Process Automation Administration Guide Process Studio User Guide Conventions Conventions The following conventions are used in this document Notational Conventions This document uses the following conventions Convention Usage Bold User interface elements such as a menu item or button For example Click Cancel to halt the operation Italics D
176. r relationships on all remaining successors In this way the successor tasks can be executed as soon as their order is known and all other successors are complete A milestone is a point in a process where predecessor tasks have completed but successor tasks have not yet started If the process is in this state a Task can be performed 9 1 Aar In the pattern the task labeled work can not execute unless the Predecessor task is complete and the Successor task has not yet started Successor may have an earliest start date or other dependencies that prevent it from starting as soon as Predecessor finishes The Milestone is implemented by a branch expression that checks the state of the tasks in question as follows not TaskProp 1 state DONE and STaskProp 2 state READY Process Studio User Guide Task Patterns Cancel Activity The Cancel Activity pattern demonstrates how a task can be cancelled using script In the pattern once task 1 is complete Tasks 2 and 3 should become active However task 2 is cancelled Gm KI An activity can be canceled using the cancel task API find Task 2 Task task2 thisProcess getTaskByName Task 2 cancel Task 2 task2 cancel Process Studio User Guide 169 170 Chapter 11 Task Patterns Cancel Case The Cancel Case pattern demonstrates how an entire process instance can be cancelled A process instance may be canceled using the
177. re the Loop task The purpose of the Loop task is to return the form to the Process Originator The Loop task is required if the Supervisor Chief Financial Officer or Accounting Work Queue submits the form using the Needs edits custom submit action The Purchase_Order process that you are creating uses Branch Tasks to control the execution of the process Therefore the loop can be configured to execute based on a default value of True the loop will execute every time its process path is selected Configure the Loop task Use the following procedure to configure the Loop task To configure the Loop task 1 Connect the Loop task to the Form Fill and Submit task The Form Fill and Submit task is the target task the first task inside the loop To connect a loop task to the target task drag the blue connector from the top of the loop task onto the target task Do not use the black connector 2 Double click the Loop task to edit its properties The properties dialog box opens Needs Edits 4 General Loop Attributes Simulation Name Needs Edits Duration 0 00 00 01 000 Scoped ID 4 Design Comments Returns the form to the process originator for editing C Enable Script Process Studio User Guide Configure the Loop Task In the Name box type Needs Edits In the Design Comments box type Returns the form to the process originator for editing 5 Click the Loop tab Needs
178. rogress Map check box For more information see Allow Viewing of Progress Map on page 121 4 Select or clear the Allow Attachments to be Deleted check box For more information see Allow Attachments to be Deleted on page 118 Configure a Web Service Task The Web Service task is essentially a web service client This task can be used to create a SOAP request by reading a WSDL file sending the SOAP request to the server and displaying the web service response back to the user To configure the Web Service task 1 Open the Web Service dialog box and click the Web service tab Web Service 15 General Web Service Attributes Simulation r WSDL URL http ws strikeiron com DnBBusinessProspect WSDL Operation Service BusinessProspectService Select Port BusinessProspectServiceSoap Operation BusinessProspect Request Response Parameter Name 3 0 soapeny Body E Ei vBusinessProspect BusinessProspect lcompany company ge IDUNSNumber DUNSNumber string CompanyName CompanyName string e lAddress Address string soapenv Envelope Icity city string C Include Header in Web Service Request Cem Grae C Invoke in Simulation 108 Process Studio User Guide Configure Task specific Properties 2 Inthe WSDL URL box type or select the WSDL Web Services Description Language file location a URL or local path Alternatively click File to browse for a
179. ronous task Asynchronous tasks do not transition automatically to a Done state Upon completion asynchronous tasks must be explicitly moved into a Done state by a user or external application An external application must notify the engine that an asynchronous task is complete through an API call Parent Child and Leaf Tasks A parent task is a task that contains other child tasks The process template itself is a parent task because it contains all of the tasks in the process In APA a process is modeled by a hierarchy of tasks with a single root task at the apex of the hierarchy The root task may have any number of child tasks which may themselves have any number of children and so on Container tasks are also parent tasks because they contain their own child tasks Leaf tasks are tasks without children They represent the single units of work involved in the process Leaf tasks are where the actual work of the process is performed Process Studio User Guide 71 72 Chapter 5 Tasks Overview Process Control Tasks Process Control Tasks control how a process is executed Container Task The Container task is a container that can hold other tasks A Container task can be used to group tasks that constitute some significant part of a process Sub process Task The Sub process task embeds an existing process that has been published to the APA Server in the current process or circular manner However this could cause
180. rst operand is implicitly converted to Boolean as if by a call to Boolean If this operand evaluates to true the operator returns the value of its second operand otherwise it returns the value of its third operand The selection operator evaluates to the type of the second operand the third operand is implicitly converted to the type of the second operand Example if AGI lt 64000 AGI 0 076 4864 This means if the expression AGI lt 64000 is true return the result of AGT 0 076 otherwise return the value 4864 i String Concatenation Operator The string concatenation operator cl evaluates to a string The string concatenation operator implicitly converts each of its arguments to string as if by a call to string The expression string amp string is equivalent to calling the function concat thatis concat string string Expression Language Functions Every function has a well defined prototype that defines its return type and the number and types of arguments that it takes An asterisk following an argument indicates that there may be zero or more instances of the argument 180 Process Studio User Guide Expression Language Functions All functions implicitly convert their arguments to the required type as if by a call to the appropriate type conversion function Boolean Functions The Expression Language uses these Boolean functions Function boo boo boo Date Fu
181. rties dialog box opens Click the Packets tab Click the name of the Form packet in the list 3 4 Click __ Form Packet Rules Rules for Packets and Form Packet tasks are created using the Rules Editor Rules are applied based on Conditions Conditions can be defined using an Expression or Script Process Studio User Guide 59 Chapter 4 Configure a Process Consequences are the results of a rule being applied The Rules Editor includes the following pre defined consequences 60 Stop Rule Execution Restart Rule Execution Script Set Node State Set Message in TOC Add Form Remove Nodes Duplicate Node Chain to Next Node Chain to Previous Node Chain to Specific Node Set Chaining Stops executing rules for this event instance For example if a form were saved when this consequence was encountered rule execution would stop If the form were saved again rules would trigger normally Restarts rules for this event For example if there were five rules and this were the consequence of the third execution would begin again at the first rule The presumption is that some action has been taken to prevent this rule consequence from triggering on the second run Executes the provided script Sets the display state of a node in the packet at this task Displays a message in the table of contents above the selected node Adds a form to the packet for all tasks Removes one or more nodes from th
182. s Use Business Calendar The delay values for Delay and Escalate tasks can be entered in business time If the delay time for a task is specified as 8 hours using the business calendar the path is followed after 8 business hours rather than 8 hours This feature can be used to prevent the Delay or Escalate tasks being completed outside business hou The rs for example during the night or weekend default business calendar calculates the time that has passed during business hours of 09 00 to 17 00 from Monday to Friday Java developers can define a custom business day and week using the BusinessCalendarFactory setDefaultBusinessCalendar method found in the APA Process API Refer to the APA Programming Guide for more information about this API Allow Form to be Edited You can override default form settings by selecting the Allow Form to be Edited check box Multiple sources can edit form properties The order of application is as follows from highest priority to lowest Set Field Proper You Process task settings Form server script Form client script ties can specify properties for form fields that override the default form settings Required The respondent must enter data in the field An error message is displayed if the user attempts to Submit the form without completing the required fields Read only The respondent cannot edit the field Hidden The user is unable to see the fi
183. s See Use Another Task to Control Loop Execution on page 103 Process Studio User Guide Configure Task specific Properties Use Another Task to Control Loop Execution A loop can be configured to execute or terminate based on the submit action chosen when a form is submitted Before you can set up a Loop task to execute based on Another Task you must configure the Form task that precedes the Loop task You must also make sure there are tasks available in your process toward which you plan to point your Loop To set up Another Task on a Loop Task 1 Inthe Choose Path Based On area click Another task 2 Inthe Another Task list click a Form Task 3 Click Edit Mapping The Loop Mapping dialog box opens If any of the submit actions in the Task Output list are chosen the loop continues If none of these actions are chosen the loop terminates 4 To add a new task output to the list click New 8 NOTE Custom submit actions can be used You must type the name of the custom submit action in the Task lag Output box Only Submit or Reject submit action types can be selected To delete a task output from the list click the row and click Delete Click OK Configure a Delay Task The Delay task delays the execution of the process To configure a Delay task 1 Open the Delay Task Properties dialog box and click the Delay tab 2 Inthe Delay box type or select the amount of time that the process is delayed
184. s 138 Publishing Wizard Permissions A 141 Configure Permissions ccccseccceeceeeeeeeeeeeeeecaeeeeeeeaeeeeedeeeeeeeceeeeeeeeeeeeeeeeaaeeeeesaeeeeseaeeeess 141 Roles Groups and Users ccccccccceccceeseceeeeeeeeeeceeeneaeeeeeeescseeeeaaeeeeeusesseeeesaeeeeeseeseeeenaaeeeeess 142 Adda useror LDAP Group EE 142 PO A RONG seroit aeiaai danada andaian edak araa eiai ia aaa etan 143 SUE EE 143 Publishing Wizard Process Settings cccceceeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeaaeeeesaaeeeseaaeeesenaeeeeee 145 Initiate a PrOCOSS serui sirinin aiaa EE aA aaka gas inaes seewadyeitankendeanaacauapayedncatoete 146 Initiate a Process from the Web Desktop A 146 Other Methods to Initiate a Process 0 eceeceeeeee eee eeeeeeeeeeeeeeeeeeeeeeeeeaaeeeeeeaaeeeeesaeeeeeeaaeeees 147 Process Studio User Guide Contents Order of Initialization oo ececcceeeeeesseeeecseeseeeesesueeueeesaeeeeeeaenees Part 3 Process Studio Reference Chapter 11 Task Patterns 0 ccccccccscsesesesesenscseecsesesescseseseseessnesececeeesesesaeeeaees Simple Design Patterns cccccccceseeceeeeeeeeeeaeeeeeeaaeeeeeaaaeeesecaaeeeeetaeeeens e e Paralleli Sii siens a anaana ai eE a paiaina Escalate EE EXCODUOM 104i tractcotecsias aie EE ATEA aed TASK ie ele EE Parallel Split ode be r geetegen ege tens aiiin ants taveten nad hele degen Nee Ee WEE Exclusive ei ue e OI eer Simple Merge EE Synchronizing Merge eceeeeeeeeeeeeeeceeee
185. s Studio User Guide Create Dynamic Values Using Substitution Syntax S NOTE Ifa field with multiple values that is from a multi select list is referenced in a substitution only the first Lat value is used in the substitution Substitution Syntax Example A process is created for creating and approving purchase orders The process originator completes a purchase order form that is then assigned to a manager for approval When the purchase order is approved or rejected an E mail task is used to send an e mail to the process originator The following substitution syntax might be used in the e mail message Purchase Order Field Order_Number has been rejected Contact your supervisor for additional information When the e mail is sent the text Field Order_Number is replaced with the order number used on the purchase order form Substitution Syntax Definitions Sequence Description Examples Sequence Description Examples Process Studio User Guide Attr attrName Retrieves the value of the att rName process attribute as a string Returns an empty string if the attribute does not exist or has an empty value SAttr purpose gets the value of the purpose attribute STaskAttr scopedid attrName Retrieves the value of the att rName task attribute as a string The scopedid parameter must refer to a scoped task identifier on the current process template Returns an empty string if the scop
186. s Studio User Guide 51 52 Chapter 4 Configure a Process O To describe the process title author description and keywords and configure script options use the General tab See General Process Properties on page 52 O To assign or modify process attributes use the Attributes tab See Configure Attributes on page 53 O To view or create process fields use the Fields tab See View and Configure Process Fields on page 54 D Ifyou want to create and configure Form Packets for use in your process use the Packets tab See Form Packets on page 57 D To configure the Initial form properties use the Initial Form tab See Configure Initial Form Properties on page 56 3 Click OK Related Topics m Create a New Process on page 46 m Add a Task on page 81 General Process Properties The General Tab of the process properties dialog box includes the following properties Title The process title This is the default used when you publish the process to the APA Server Author The name of the process author Description A description of the process Process Studio User Guide Configure Process Properties Keywords Keywords that describe for the process separated by commas Date Estimation If this check box is selected the APA server Enabled calculates data about projected durations for unexecuted tasks Enabling this option could potentially impact performance Script properti
187. s XML HTML and PDF 21 Chapter 1 Introduction By using standard formats organizations can deploy automated online forms without using proprietary form formats and filler applications The APA SOAP API enables integration with other enterprise application environments Enforce Compliance and Best Practices Process Automation enforces adherence to best practices corporate policies and government regulations by centralizing process control It also provides visibility into processes notifies risk managers of non compliance and automates corrective action and responses APA provides a secure audit trail by automatically tracking approvals reviews edits and business activity at every step of a process Securely Connect Across Your Business APA securely connects all people across the enterprise whether inside or outside the enterprise firewall As a result all users can stay better informed and work together more effectively Advanced form routing significantly reduces paper shuffling as forms are circulated electronically Role based routing routes forms based upon a job function or relationship rather than to specific groups or individuals APA can integrate with existing LDAP directory services synchronizing users and groups with a central directory server to provide users with a single login access to the APA server Scale Your Processes to Match Your Growing Business Built to address the complexities of any size organi
188. s definition You can delete any field from the list but if the field still exists on a form it is automatically recreated the next time the field list is refreshed Custom fields do not appear on forms and are not recreated Add a Custom Field to the Process Definition To add a custom field to the process definition use the following procedure To add a custom field to the process definition 1 Click New A field is added to the bottom of the list 2 Inthe Name column type the field name 3 Inthe Value column type the field value 4 Inthe Type column click a data type in the list 5 To make a field Sticky read only select the check box in the Sticky column Delete a Field from the Process Definition To delete a field from the process definition use the following procedure To delete a field from the process definition 1 Click the field in the list 2 Click Delete Data Types for Process Fields Process fields can use one of the following data types Process Studio User Guide Configure Process Properties Data Type Storage Format Number The field value is stored as a number with as a decimal symbol All currency symbols and other separators are removed Text The field value is not formatted Date The field value is stored as CCYY MM DD Time The field value is stored as HH MM SS 24 hour When process field values are used in forms the values are displayed using
189. s negative zero then negative zero is returned If Nis less than zero but greater than or equal to 0 5 then negative zero is returned NOTE The result of calling the round function is not the same as the result of adding 0 5 and then calling the floor function 183 184 Chapter 12 APA Expression Language Task Functions Function string selected submit action taskID Description Used in Process Studio Retrieves the value component as a string of the selected submit action for the given task The taskId parameter must refer to a scoped task identifier on the current process template Returns an empty string if the task identifier is invalid or if the selected submit action has not been set For example selected submit action 12 returns the submit action value of the task with scoped ID 12 Process Studio User Guide PART 4 Process Studio Tutorial This section contains a tutorial that demonstrates how to create a process using Process Studio m Getting Started H Process Studio Tutorial Part 4 Process Studio Tutorial 186 Process Studio User Guide CHAPTER 13 Getting Started This section provides an overview the Process Studio Tutorial and describes prerequisites m Tutorial Overview m Tutorial Prerequisites Process Studio User Guide 187 Chapter 13 Getting Started Tutorial Overview In this tutorial you will create a simple Purchase Order process templ
190. s on multiple forms included in the process and the field has the same data type on each form that data type is used for the process field If the field exists on multiple forms but the field does not have the same data type on each form the data type for the process field is set to String 55 56 Chapter 4 Configure a Process Process Studio contacts the APA Server to determine process field data types at the following times m On listing process fields in the process field configuration screen m On opening the Expression Builder m On publishing the process You can also manually set the data type for a process field After the data type for a particular field has been set either manually or automatically no more automatic checking occurs for that field If any changes are made that affect the data type the process designer must manually change the data type Some possible changes that can affect the data type include m Introducing a new form into a process definition m Republishing a form that is part of a process definition Configure Initial Form Properties The Initial form tab of the process properties dialog box configures the Initial form properties The first task in many processes is a Form Task which is assigned to a user to enter data To configure Initial form properties 1 Select the Use Initial Form check box 2 Click one of the instantiation options D Instantiate Process Before Displaying For
191. s to be replaced by actual values For example merge filenamel In some documents angle brackets are used to denote these items Ellipses indicate repetition of the same pattern For example merge filenamel filename2 filename3 where the ellipses specify filename4 and so on The use of punctuation such as single and double quotes commas periods indicates actual syntax it is not part of the syntax definition Process Studio User Guide Autonomy Product References Notices This document uses the following notices CAUTION A caution indicates an action can result in the loss of data IMPORTANT An important note provides information that is essential to completing a task NOTE A note provides information that emphasizes or supplements important points of the main text A note supplies y information that may apply only in special cases for example memory limitations equipment configurations or details that apply to specific versions of the software TIP A tip provides additional information that makes a task easier or more productive Autonomy Product References This document references the following Autonomy products Portal Web Desktop m Autonomy Process Automation APA m Autonomy Process Automation APA m Autonomy Process Automation APA Form Designer QS ee Ne Ce m Autonomy Process Automation APA Management Console Process
192. send a copy of the 8 Purchase_Order form to the Process Originator see Configure the Form Copy Task on page 218 Double click the Email task to edit its properties As the previous email task was used when the form was rejected by the Process Originator s supervisor and this task is intended for a rejection by the CFO or Accounting Work Queue make the following changes O Inthe Design comments box in the General tab type Sends an email to the process originator when the form is rejected by the CFO or Accounting Work Queue O Inthe body of the e mail message in the Email tab type Purchase Order S Field Order Number has been rejected by the CFO or Accounting Work Queue Click OK Related Topics Configure Tasks on page 91 Configure General Properties on page 92 Configure an E mail Task on page 107 Create Dynamic Values Using Substitution Syntax on page 34 Send a Copy of the Form to the Supervisor A form copy task must be added to the container to send a copy of the rejected form to the originator s supervisor This form copy task can be executed in parallel with the form copy task that sends a copy of the form to the originator Process Studio User Guide Configure the Rejected2 Container To send a copy of the form to the supervisor 1 Add another Form Copy task to the process template The process template should look similar to the following diagram 3 14
193. shed See Save a Process on page 48 Publishing and Permissions The Publishing Wizard displays all the folders on the APA server However users cannot see forms or processes in folders for which they do not have publishing rights If you select a folder to which you do not have publishing rights the controls on the Publishing Wizard dialog box are disabled A lock icon on the selected folder indicates the lack of publishing rights You can add delete or rename folders on the APA server You can delete empty folders to which you have publishing rights You can not delete or rename folders that contain forms or processes When a new sub folder is created it inherits publishing permissions from its parent folder Publish to Multiple Servers APA Process Studio stores references to process forms by folder and form ID This allows process definitions to portable between APA Servers A single process definition can be published to multiple servers and used successfully if each server has common folder names and form IDs as used in the process definition The need to publish process definitions to multiple servers may arise if you use a test server prior to deploying process definitions to a production server Form references are converted from folder and form ID to form GUID on a specific server when a process definition is published APA Process Studio stores references to work queues by name rather than by the internal numeric
194. sks it contains The Duration of a Container task is set to the greater value of E The total duration required for any connected tasks E The longest duration of any task that is not connected y For example A Container task contains two tasks Form and Manual You assign a Duration of 1 day to the Form task and 2 days to the Manual task If the Form and Manual tasks are connected the Container task has a Duration of 3 days If the Form and Manual tasks are not connected the Container task has a Duration of 2 days To estimate the duration of a task m Inthe Duration box type or select a duration Scoped ID The Scoped ID is a number that identifies a task within the process Each task in a process has a unique Scoped ID To edit the Scoped ID 1 Click Edit The Edit Scoped ID dialog box opens Process Studio User Guide 93 94 Chapter 7 Configure Tasks 2 Type anew Scoped ID The Scoped ID must be a valid 32 bit signed integer 3 Click OK Design Comments The Design Comments property allows the process author to type comments about the task for future reference Comments are especially useful if other designers need to edit the process template properties are displayed in a tooltip when you hover the 0 TIP The Name Duration and Design Comments mouse pointer over a Task in a Template or Instance To edit the Design Comments m Inthe Design Comments box type comments about the function of t
195. te a Rule on page 61 67 68 Chapter 4 Configure a Process Configure the Chain to Specific Node Consequence The Chain to Specific Node consequence allows you to select the next form that should be displayed to the user When forms are chained and a user submits a form the next form is displayed automatically Using rules to specify chaining allows you to bypass the table of contents for a form packet The order of the forms can be changed or nodes ignored depending on the data that is entered on a form Chain to Specific Node Cardholder information Please select the node to which you would like to chain e Credit Report Information Decision Summary Credit Report Information To configure the Chain to Specific Node consequence 1 Inthe list click the node that you want to display next 2 Click Select node Click OK Related Topics m Create a Rule on page 61 Process Studio User Guide CHAPTER 5 Tasks Overview This section describes the tasks that are available in Process Studio m Tasks Overview m Process Control Tasks m Form Tasks m Other Tasks Tasks Overview A task is an action or piece of work that forms one logical step within a process The tasks that can be used in processes are available from the Task Library Tasks can be classified in a number of ways m Start and End Tasks m Predecessor and Successor Tasks m Manual and Automated Tasks m S
196. the Configure Roles list You might need to repeat these steps to add further types of user to the simulation To delete a configured role click the role and click Delete To edit a configured role click the role and click Edit To run the load simulation click Run The Simulation dialog box opens Depending on the Time Compression used the simulation may take a few minutes to complete To save the data generated by the simulation click Save Data This allows you to save the data in a comma delimited file csv file on your hard drive or a network location Click Close Process Studio User Guide CHAPTER 9 Connect to an APA Server This section describes how to connect to the APA Server m Connect to the APA Server m Disconnect from the APA Server m Search the APA Server Connect to the APA Server A connection to the APA Server is necessary to publish a process or search the APA Server To connect to an APA Server 1 Click the Connect command D On the Tools menu click Connect O Click Connect The Login dialog box opens 2 Inthe Server box type or select the server name In the User Name box type your user name In the Password box type your password Process Studio User Guide 131 Chapter 9 Connect to an APA Server If you would like your system to remember your password select the Remember my password check box Click OK A connection is established to the APA Server Related Topics
197. the Control drawer 2 Drag the Container task from the Task Library onto the Graphical View Add Tasks to a Container To add tasks to a container use the following procedure To add tasks to a container 1 Double click the Container task on the process template Graphical View or in the Process Tree Container tasks are displayed with a folder icon in the process tree Process Studio User Guide Connect Tasks The process template Graphical View displays the contents of the Container 2 Drag tasks from the Task Library onto the Graphical View NOTE The number of tasks in a Container is displayed a in parenthesis on the Container Task in Graphical View NOTE If you hover the mouse over the Container task the tasks it contains are displayed in a tooltip 3 To move back to the main process template O Double click the process name in the Process Tree D On the View menu click Parent Level O Click Parent Level 4 Related Topics m Save a Composite Task on page 87 Connect Tasks After tasks are added to a process template they need to be connected The connections between tasks define the order in which the tasks are executed m Aconnector is a small circle that appears on the edge of a task in the Graphical View It is used to connect the task to other tasks in the process A pathis the line used to connect tasks m A process can have multiple paths between its start and end tasks Various types of
198. the target task enters an Aborted state the Exception task is executed This is useful for implementing script error handling In the example if the Form task fails the Exception path is executed and an E mail is sent to the address provided in the E mail task gi En Ee Baw Process Studio User Guide Form Tasks Form Tasks Form tasks are tasks that are associated with forms Form Task The Form task is used to assign a form to a user either for entering new data or modifying existing data within a process Form Copy Task The Form Copy task is used to assign a read only copy of a form to a user This task type can be used to distribute final copies of a form at the completion of a process Form Export Task The Form Export task is used to run all exports defined on the APA Server for a specific form 5 NOTE When the Form Export task is executed the form y default values as defined in Process Studio are applied for any fields that do not have values Form Packet Task The Form Packet task is used to associate a Packet with a Task A packet is a collection of forms bound together in a structure for processing For information about creating Form packets see Form Packets on page 57 Utility Tasks Utility tasks are used to perform specific actions Script Task The Script task is used to run Server Side script For more information about writing server side script refer to the APA Programming
199. ther user or group The task remains active Save Saves the form to the user s Inbox on the APA Server Incomplete forms are not moved to the Saved Items folder If the form is incomplete it remains in the Inbox The task remains active Cancel Cancels the form submission The task remains active Reset Resets the fields on the form to the default settings Enable Form on Mobile devices APA Mobile Option enables APA users to receive and submit in process forms using mobile devices NOTE This feature is only available if you have the APA D Mobile Option Please see your Autonomy sales representative for additional information NOTE Ink Pictures and Buttons are not supported on mobile devices Process Studio User Guide 119 Chapter 7 Configure Tasks To display forms on mobile devices 1 Click one of the options in the Enable Form on Mobile Devices list O Yes The form is enabled for use on mobile devices If you select this option you must select the form fields that should be displayed See Configure the form fields to display on mobile devices on page 120 O No The form when associated with this task is not enabled for use with mobile devices O Use Form Defaults The form is enabled for use on mobile devices The form s default settings determine the fields that are displayed on the mobile device Click Edit to view these fields The default settings can not be modified in Process Studio T
200. this option enabled Process Studio User Guide 121 Chapter 7 Configure Tasks 122 Process Studio User Guide CHAPTER 8 Simulate a Process Process Studio includes simulation tools that can be used to test the execution of a process before it is deployed to the APA server This section describes Process Simulation m Flow Simulation m Load Simulation Flow Simulation A flow simulation is used to test the execution of a process A flow simulation shows what paths are taken through the process and tests the links between tasks Create a Flow Simulation To create a flow simulation in Process Studio use the following procedure to create an instance of the process NOTE Deprecated script is not supported in flow simulation mode Additionally some API objects are not supported in flow simulation mode due to the fact that the complete server environment is not available Process Studio User Guide 123 124 Chapter 8 Simulate a Process To create a Flow Simulation 1 On the Run menu click Create Flow Simulation Alternatively click Create Flow Simulation c An instance of the template is created The instance appears in the Instances tab The state of each task is displayed by color coding See Task states on page 125 When an instance is created all of the tasks are set to the Ready state On the Run menu click Activate Instance Alternatively click Activate Instance gt Th
201. torial_Supervisor Relationship and Tutorial_cFo Chief Financial Officer Relationship to the APA Server S NOTE Only Administrators or Relationship Administrators can configure Relationships To add a relationship 1 Start the Management Console 2 Inthe navigation pane click Relationships 3 On the File menu click Add The User Relationship dialog box opens In the Relationship ID box type Tutorial_Supervisor Select the Allow users to modify check box Click Display Settings The Display Settings dialog box opens 7 Double click the Name cell in the English language row or another language row that you want to use and type Tutorial_Supervisor and then press ENTER 8 Double click the Description cell and type Tutorial_Supervisor and then press ENTER 9 Click OK Click OK again A message is displayed asking whether you want to Customize the relationship This allows you to assign users to the relationship 10 Click Yes Process Studio User Guide 189 190 Chapter 13 Getting Started 11 12 13 14 15 16 The User Relationship dialog box opens Click the By Target Relationship tab In the Tutorial_ Supervisor area click Search The Browse for Relationship target dialog box opens Search for and select the user you want to act as the Supervisor During the tutorial this user receives forms for approval Click OK In the Users area click Search Search for and select
202. try Fields are treated as time values See Time Data Type on page 174 m Check Boxes are treated as boolean values See Boolean Data Type on page 175 If the referenced field is renamed the expression is updated to reflect the name change Process Studio User Guide 175 176 Chapter 12 APA Expression Language Literal Values The Expression Language supports two literal values m String m Numeric There is no direct support for date or time literals The functions date and time should be used to convert string or number literals to the desired type Example date 2002 10 23 ortime 60 There is no direct support for boolean literals The functions true and false should be used String literals String literals are text delimited by double quotes for example A String Literal The double quote character may be included in a string literal by preceding it with a backslash for example This double quote character VI will be included in the string literal For more information see String Data Type on page 173 String literals may contain XML style numbered entities for example x4042 Numbered entities are converted to Unicode characters when the expression is parsed Numeric literals Numeric literals must conform to the format specified in Number Data Type on page 173 Wildcard References Certain functions operate on multiple values for example
203. u set up the relationships and work queues and Purchase Order form on the APA server see Tutorial Prerequisites on page 188 In this tutorial you will work through the following tasks m Create a Process Template and Add Tasks m Create the Supervisor Review m Adda Branch Task and Successor Tasks m Configure the Loop Task m Define the Approved Path Using an Expression m Configure the Rejected Path m Configure the CFO Review Task m Configure the Accounting Work Queue Review Task m Configure the CFO Review Branch Task m Configure the Accounting Review Branch Task m Configure the Rejected2 Container m Configure the Approved Container Process Studio User Guide 193 Chapter 14 Process Studio Tutorial Create a Process Template and Add Tasks This section of the tutorial describes how to m Create a New Process Template m Adda Form Task to the Template m Configure the Form Task m Save the Process Template Create a New Process Template Use the following procedure to create a new process template To create and save a process template 1 Start Process Studio 2 On the File menu click New A new process template is created 3 On the File menu click Save As The Save dialog box opens Save in My Recent Documents e Desktop My Documents gs My Computer Purchase_Order_Process rana File name Purchase_Order_Process xpd Files of type
204. unting WQ Review task executes when the CFO approves the purchase order or if the supervisor approves the purchase order and the total value is not 10 000 or greater This task is assigned to the Tutorial_Accounting Work Queue The Work Queue receives the completed Purchase Order form in the Work Queue Inbox An individual in the Tutorial_Accounting Work Queue reviews the form and then choose whether to approve the form reject it or send it back to the originator for editing Process Studio User Guide 227 Chapter 14 Process Studio Tutorial This section of the tutorial describes how to m Configure the Accounting WQ Review Form Task Configure the Accounting WQ Review Form Task Use this procedure to m configure the properties of the Accounting WQ Review Form Task m assign the task to a work queue To assign the Accounting WQ Review task to a work queue 1 Double click the Accounting WQ Review task to edit its properties The task has already been named In the Duration box type 0 00 05 00 000 5 minutes In the Design Comments box type a suitable description for the task Click the Form tab Accounting WQ Review 8 General Form Assignment Attributes Simulation Select Form TutorialForms Purchase_Order Allow Form to be Edited Set Field Properties Allow Attachments to be Deleted Initialize Form at this Task If first Customize Submit Action List Enable Form on Mobile Devices Use Form Defa
205. vers must be greater than zero and less than or equal to the total number of committee members Minimum percent to approve A minimum percentage of members must approve the form before the task is considered approved The percentage of approvers must be between zero and one hundred and must be an integer The committee task can also be configured to wait for all form submissions If this option is enabled all form submissions must take place before the task can be considered complete regardless of the approval status Other Tasks The following tasks can help you work more efficiently Composite Task The Composite task allows you to create a new task in which two or more tasks are defined using one task name The composite task can then be used repeatedly in processes This is useful in situations where certain tasks are used in the same pattern repeatedly Process Studio User Guide 79 80 Chapter 5 Tasks Overview For information about how to create a composite task see Save a Composite Task on page 87 Sticky Note Task The Sticky note task is used to add comments to process templates See Add a Comment to a Process on page 89 Process Studio User Guide CHAPTER 6 Add and Connect Tasks This section describes how to create and connect Tasks in Process Studio After creating a process tasks can be added to the process template A task is an action or piece of work that forms one logical step wit
206. w Process on page 46 Retrieve a Process from the APA Server on page 47 Save a Process on page 48 Retrieve a Process from the APA Server A process template can be retrieved from the APA server and opened in Process Studio The folders and processes that you can retrieve depend on the permissions configured by your APA Administrator To retrieve a process template from the APA Server 1 2 3 Connect to the APA Server see Connect to the APA Server on page 131 On the File menu click Retrieve Process The Retrieve Process dialog box opens Select a process template See Search the APA Server on page 132 Related Topics Process Studio User Guide Create a New Process on page 46 Open a Process on page 46 Save a Process on page 48 47 48 Chapter 3 Create and Save a Process Save a Process Save As To save a process template to an XML Process Definition XPD file use the Save command To save a process template 1 There are several ways to save a process template D On the File menu click Save O Click Save i D Press CTRL 8 2 Ifthe file has not been saved before the Save dialog box opens See Save As on page 48 Related Topics m Create a New Process on page 46 m Open a Process on page 46 m Save a Process as an Image on page 49 To save the process template to a new XML Process Definition XPD file use the
207. y Process Studio User Guide Configure the CFO Review Branch Task The end of the process template should now look similar to the following diagram o Si 0 Needs Edits Related Topics m Branch Task on page 74 m Add a Task on page 81 m Connect a Branch Task on page 84 Configure the CFO Review Branch Task Use the following procedure to configure the branch task To configure the branch task 1 Double click the Branch task to edit its properties 2 Click the Branch tab Process Studio User Guide 233 234 Chapter 14 Process Studio Tutorial 3 lt Branch 11 geen General Branch attributes Simulation Branch Paths Index Task Default Needs Edits 4 Accounting WO Review 8 Container 12 Choose Path Based On Default Path the default path can be changed dynamically from script Expression Another Task CFO Review 7 v Edit Mapping a Select an optional alternate path if the chosen path does not exist q In the Branch Paths area the Needs Edits Accounting WQ Review and Container tasks have been assigned Index values If the path Index values for your branch task do not match those shown in the preceding image select a row in the Branch Paths table and click Move Up or Move Down The path index for the Needs Edits task has a value of 0 The path index for the Accounting WQ Review task has a value of 1
208. y displayed when processes are published to the APA Server Form Packets A Form Packet is a collection of forms that are bound together for processing Use the Packets tab of the process properties dialog box to create and configure Form Packets S NOTE This option is not available in all versions of Process Studio Related Topics m Form Packet Task on page 77 Create and Configure a New Form Packet To create and configure a new form packet use the following procedure To create and configure a new Form Packet 1 On the Edit menu click Process Properties The process properties dialog box opens 2 Click the Packets tab Process Studio User Guide 57 58 Chapter 4 Configure a Process Form Packets General Attributes Fields Packets Initial Form Credit Card Application Packet Namespace Credit _Card_Application Table of Contents Cardholder Information Credit Report Information Decision Summary 3 Click The Enter Packet Name dialog box opens Type a name for the packet and click OK Use the Table of Contents area to configure the structure of the packet D D D To add a new node i Click New ii Type a name for the node and press ENTER To add a new child node add a new node and then drag the node onto an existing node The new node becomes a child of the existing node To duplicate a node click Duplicate Any form properties child nodes and c
209. ynchronous and Asynchronous Tasks m Parent Child and Leaf Tasks Process Studio User Guide 69 Chapter 5 Tasks Overview Figure 2 Example tasks Tv Start and End Tasks A start task is a task at which the process begins processing Any task that does not have a predecessor task is a start task In Figure 2 the start task is the Form task An end task is the final task in a process When the end task transitions to a Done state the process is complete Any task can serve as an end task Predecessor and Successor Tasks Predecessor tasks are tasks that execute before another task Predecessor tasks must complete or cancel before their successor tasks can start In Figure 2 the Form task is the predecessor of the E mail task In most cases the APA Server does not execute a task until all of its predecessors have been completed or cancelled It is important to note the behavior of a task with multiple predecessors A task is not executed repeatedly as each of its predecessors completes Instead it executes a single time when all of its predecessors are complete Successor tasks start after the predecessor tasks complete In Figure 2 E mail is the successor of Form If a task has multiple successor tasks then the successor tasks are all executed in parallel Manual and Automated Tasks A manual task is a task that is not capable of automation and is therefore outside the scope of APA An example of a manual task is printing a
210. zation APA has a highly scalable fault tolerant open architecture that allows you to accommodate the growth of people processes and information across your enterprise Autonomy Process Automation Components Autonomy Process Automation includes the following components m Form Designer m Process Studio m APA Server m Portal and Web Desktop m My Data Client Process Studio User Guide Autonomy Process Automation Components m Management Console m Optional Components Form Designer Form Designer is used to create forms and publish them to the APA server Process Studio Process Studio is used to create process workflows and publish them to the APA server APA Server The APA server hosts the APA client applications published forms and processes The server presents forms to users and routes the forms on submission It also handles the initiation management and tracking of workflow processes The APA server enforces the business rules specified by process definitions The APA Server can connect to database servers for form validation and data export The APA Server can also connect to an LDAP server to synchronize users and groups with a central directory Portal and Web Desktop Portal and Web Desktop provide access to published forms and processes and supply the user interface for routing these forms and processes My Data Client The My Data Client provides users with direct access to data exported from

Download Pdf Manuals

Related Search

Related Contents

mode d`emploi carte de fidélité unique  2 - 取扱説明書ダウンロード  Toshiba RD-XS32SC Speaker System User Manual    DS-2AF7268N-A Quick Guide  dlt_cle_F  Finlux 47F9076-T User's Manual  MANUALE UTENTE    www.pce-industrial-needs.com INSTRUCTION MANUAL PCE-555  

Copyright © All rights reserved. Failed to retrieve file