VINYL CUTTER TROUBLESHOOTING TIPS
Contents
1. VINYL CUTTER TROUBLESHOOTING TIPS Issue Cutting dashes dotted line or looks perforated Example ee eee E E M M Cause 1 Damaged Cutting Strip groove in strip that results in uneven cutting surface 2 Too much blade exposed friction build up because there is not enough space between the blade and material Solution 1 Replace cutting strip 2 Decrease blade depth Issue Not cutting material Cause 1 Dull blade 2 Not enough blade force pressure Solution 1 Replace blade 2 Set blade force pressure for the type of material being cut Issue Cut line tapers off and not cutting towards the end of the job Example Cause 1 Dull blade 2 Blade holder not secured properly in tool holder Solution 1 Send smaller jobs and check blade force presure periodically by weeding a piece off periodically 2 Confirm Blade Holder is secured in Tool Holder not sitting on top of the tool holder vs secured in slot Issue Not completing corners blade seems to skip corners and or turns FE Example l Blade direction Cause Sharp part of the blade is not turning and is dragging on its side Solution 1 Replace Blade Holder Ball bearings have debris or have been knocked out of alignment 2 Clean out the inside of the Blade Holder a Take out the blade b Spray lubricant such as WD40 onto a paper plate and roll the blade in the lubricant c Move blade in and out of Blade Holder wiping any debris that comes out with it2. in between Issue Not cutting corners correctly Example C Ll Rounded corners Corners look like flags Cause Offset setting is incorrect Solution Change the offset setting Rounded corners Offset setting is too low Flagged corners Offset is too high STAHLS 1 800 4 STAHLS e www stahls com
Download Pdf Manuals
Related Search