Sliding Door Installation Manual - Canbath Frameless glass shower
Contents
1. Sliding Door Installation Manual Model 13 London Stainless steel hardware that ensures superior quality and durability in brushed nickel satin or polish chrome finish 2 i 2 Door rollers 2 Clamps for tracks gt N For our in stock panels the clamps are installed regarding to the panel size for easy installation Dn 2 Rail wall connectors Sliding rail 2 Clamp installed 2 Door stops 1 Floor guide 1 Door handle Step 1 For 60 Rail Take the measurement of your door opening Cut the Rail 1 2 shorter than the opening being careful to cut the correct end The 60 pipe has pre drilled holes at one end If cutting is required it should be done from the opposite end Step 1A For longer than 60 support pipe Drill 2 holes diameter 3 8 in the pipe for the installation of the hardware for the fixed glass panel The first hole is located 5 from the pipe end and the second hole 151s 18 2114 or regards the holes in a custom panel from the center of the first hole Check always the hole distance in your fixed glass panel N WY 2 Clamp for tracks Step 2 Connect the 2 pcs to the rail slide one door stopper in first See photo on the next page Before installing the rail to the wall slide the other door stopper onto the rail f 2 Rail wall connector To install the wall connectors Drill holes regarding to the screws you use maybe different screws2. as delivered To locate the correct mounting locations measure from the bottom of the glass panel to the center of the rail adding 1 16 for space under the glass panel when installed do not set the glass on the tile floor Install the rail and the fix glass panel Slide a Rail wall connector onto each end of the pipe Connect the pipe to the wall and slide the pipe holder in place tighten the loc screws with the allen hex head key Install the fixed glass panel to the rail with 1 16 space on the bottom and fill with clear silicon Install the floor guide for the sliding panel The floor guide has an adjustable insert for 8 mm 10 mm and 12 mm glass please set on 10 mm Install the door rollers on the sliding panel and hang the door behind the fixed panel on the pipe adjust the door stopper and screw the safety pin in the roller Sliding door installed Side panel for L shape shower We also supply in stock or custom side panels for L shape corner showers Sliding doors for bathtub enclosure also available CONTACT CANBATH 1 Marconi Court Unit 5 Bolton ON L7E 1E2 Phone 905 951 8110 e mail info canbath ca web www canbath ca CANBATH is a division of IRRIC Holdings LTD Phone 905 951 8110 1 Marconi Court Unit 5 Bolton ON LZE 1E2
Download Pdf Manuals
Related Search