User Manual VOX-2 Talking Scale LIV-041-342-0000
Contents
1. to replace the battery If the power is too low it will show Lo when powered on and then it will turn off automatically OPERATING INSTRUCTIONS Weighing Procedures 1 Place the scale on a flat hard surface 2 Press and release the ON key and it will say Hello This is the far right button on the front of the scale 3 Once the platform is stable you will hear I m Ready and the display shows 0 4 The weight will be displayed on the LCD and spoken when the reading is steady 5 Gently place the items to be weighed on the scale platform 6 Press TARE to deduct the weight of an item or container that is on the scale The reading is now 0 This is the far left button 7 The stability indicator H in the top left corner will display when the weight is stable 8 Press MODE to select the desired weighing mode grams or ounces This is the second button from the left 9 Turn the scale off by pressing the OFF key and it will say Goodbye This is the second button from the right Page 2 of 5 Tare Tare can be used for eliminating the weight value of an empty container Place an empty container on the scale and press TARE Then place the items to be weighed in the container NOTE When all weight is removed from the weighing tray the tared value of a container will be displayed as a negative number Press tare again to return the scale to zero CALIBRATION Calibration may be r2. User Manual VOX 2 Talking Scale LIV 041 342 0000 Capacity 5000g x ig 11 0lb x 0 1 oz Thank you for purchasing the My Weigh Vox 2 digital scale Please read all operating instructions carefully before use This electronic scale is a precision instrument With normal care and proper treatment it will provide years of reliable service For more information please visit www myweigh com Never load the scale with more than the maximum capacity Although the Vox 2 is designed to be extremely durable with extra overload protection built into the case overloading will permanently damage it Avoid any exposure to extreme heat or cold Your scale works better when operated at normal room temperature Keep your scale in a clean environment Dust dirt moisture vibration air currents and or a close proximity to other electronic equipment can all cause an adverse effect on the reliability and accuracy of your scale Handle with care Gently apply all items to be weighed onto tray top Avoid shaking dropping or otherwise shocking the scale Scales are delicate instruments and unlike cellular phones scales have delicate sensors that determine how much an item weighs If you drop or shock your scale there is no way for us to protect 100 against load cell or sensor damage Failure to follow these instructions will void your warranty Always allow the scale to acclimate to normal room temperature for at least one hour before use Give your scal
3. an capacity Note The scale will give an audio signal to represent negative readings when using TARE function AUDIO Switching the talking feature on off Use the switch on the bottom of the scale to switch on off the talking feature Adjusting sound level Use the switch on the bottom to set sound level Hi Lo Selecting language 1 After showing 0 press and hold the MODE button for 7 seconds You will hear Hello of the existing language 2 Press the MODE button to select the desired language 3 To confirm the selection press and hold the MODE button until it says Goodbye SPECIFICATIONS Capacity 5000g x 1g Units grams pounds ounces Auto Off 90 seconds Scale dimension 230 mm x 162 mm x 41 mm Tray dimension 130 x 132 mm Scale weight 560 g Page 4of 5 Operating temperature Optimum 10 to 40 degrees Celsius 50 to 104 degrees Fahrenheit Power Source 4 AA batteries Tare Range up to maximum capacity of scale Page 5 of 5
4. e sufficient warm up time usually 30 60 seconds before calibration to give the internal components a chance to stabilize BATTERIES Low batteries and bad battery connections are the 1 cause of scale malfunction and inaccuracy We test all of our scale returns from consumers and 60 of them are battery related problems This sounds silly but it s true A scale will perform poorly when it has low batteries Use good quality Page 1of5 batteries and replace them often remove the batteries if you plan to store the scale for longer than 14 days We include good quality batteries with all of our scales but they can run low in storage If your scale simply won t turn on while on battery power it is often caused by loose battery connections Battery prongs terminals are made of metal and they have to be in contact with the batteries You can use a paperclip to slightly bend the battery prongs to have a better connection Some poorly designed batteries have recessed or partially obstructed battery terminals This may cause your prongs to be touching the plastic housing of the battery instead of the metal of the battery terminal Battery installation a Press and lift open the battery cover located at the bottom of the unit b Insert four AA batteries and make sure the polarity is correct and c Close the battery cover until it clicks shut Note If the battery symbol appears in the display it means low battery power It is time
5. equired when the scale is first set up for use or if the scale is moved to a different altitude or new location This is necessary because the weight of a mass in one location is not necessarily the same in another location Also with time and use mechanical deviations can occur 1 Place the scale on a flat hard surface 2 Press the ON key and it will say Hello 3 Once the platform is stable you will hear It s ready and the display shows 0 4 Put 5kg standard weight on the platform Make sure the reading is steady 5 Press and hold the TARE key for 5 seconds the display will show 5000 and flash twice Do not release the key until it shuts down automatically The calibration is complete FEATURES Overload Indicator When the display shows Err this indicates an overload Remove excessive load immediately Remember you can permanently damage the scale and void your warranty by overloading it Negative Value Any tared value will be displayed as a negative number once all weight is removed Press TARE to re zero the scale Page 3 of 5 Auto off An auto shut off feature is provided to conserve battery power The unit will automatically turn off after 90 seconds of inactivity To add the weight feature Press TARE to zero the value of the last weighing item before adding the next item being weighed You can repeat this procedure many times as long as the combined weights are less th
Download Pdf Manuals
Related Search