757900170 ZMD-DD-SAN4 ZMD-DD-SAN8 user manual
Contents
1. PTZ Clear Alarm Tool Bar Quick Playback Shut down Single Channel Four Channels Nine Channels Sixteen Channels Position System HDD Overwrite Record Schedule Add User Record Quality Del User Record Frame Rate Authority Manage Record Source Preview Cruise OSD Setting DVR ID Number Record Resolution SPOT SETTING Sub Code Record Camera CH Network PTZ Protocol IP Address PTZ Baudrate Subnet Mask PTZ ID Gateway Color Setting Http Port Video Motion Detection Command Port Mosaic Media Port Motion Handling PPPoE Setting Video Lost PPPoE IP Handling Channel Name EES Setting DDNS Net Alarm Input CH Auto Register Alarm Input Type File Sharing Event Handling Email Setting Alarm Alarm Setting Mobile Port Alarm Zoom Out Log View HDD Full Actions Upgrade Maintenance HDD Manage Save amp Exit HDD Capacit Exit PRSS Save Restore Defaults Hardware Version Logout2. Software Version Software Release Date 2 Menu Operations Press SET button to enter into system setting screen Press e button to start stop recording manually Press gt button to play record file Press PTZ button to enter into PTZ control screen Note This manual indicates the Menu selection icons and selection boxes in XX the buttons in Menu screen except menu selection icons in XX the buttons on front panel and remote controller in XX The highlight menu is the current active one User can move highlight icon to the menu needed using A gt VW Tal gt button and press OK button to confirm selection or press ESC button to return to upper menu Selection box User can move highlight icon to the selection box needed using lt gt button and press OK button to confirm selection Multiple items are allowed to be selected together at once by left clicking mouse Sub menu list User can move highlight icon to the sub menu needed using Tal gt button Or roll mouse to select directly Only one item can be selected here Edition box when in edition box user can type in numbers directly by pressing number buttons Press DEL to delete the character before cursor and press OK or ESC button to exit Sub screen button Press it to pop up sub screen When in sub screen select Confirm to save configuration and return to the upper menu Press ESC or select Canc
3. Log out restart device Clear alarm Alarm Notification When network connection is broken or abnormal the alarm notification of No heartbeat of device please check the network will be displayed in the right up side of the main screen After recovery of network the preview will be displayedautomatically When alarms ofremote notification occur the alarm notification with alarm input number contained such as Device alarm IO alarm IO input x will be displayed in the right up side of the main screen When alarms of motion detection with remote notification occur the alarm notification with the alarm channel number contained such as Device alarm motion detection channel 1 will be displayed in the right up side of the main screen When alarms of video loss with uploading to center occur the alarm notification with the alarm channel number contained such as Device alarm video loss channel x will be displayed in the right up side of the main screen Preview BI Adjust image contrast up down cj 3 Adjust brightness up down Ea Start stop voice monitoring The icon will turn to green whensound monitoring Start stop recording The icon will turn to green when recording E Click to snapshot Stop preview Note Click Loceistorave to set the storage directory of record files and pictures captured PTZ Setting The PTZ setting of client web is similar as the PTZ operation of local device please refer to 4 4
4. Preview Resolution PAL 720x576 D1 horizontal line 550 vertical line 450 NTSC 720x480 D1 horizontal line 550 vertical line 400 PE Resolution PAL 352x288 CIF horizontal line 300 vertical line 250 y NTSC 352x240 CIF horizontal line 300 vertical line 220 Audio Compression G 726 ADPCM Input Output Audio Sampling Rate BIZ Audio Channel Type Mono Sampling Bit 16 bit DC 12V 3A positive inside negative outside power Power Supply adapter is connected outside Operating Temperature 0 C 50 C Environmental Se Operating Humidity 10 90 RH Power Consumption lt 12W without HDD 340mmx260mmx50mm W D H Table VI 2Main Functions Main Functions Multiple control methods mouse IR remote controller front panel and GUI with navigation supported Recording status and alarming status can be displayed directly on desktop and front panel Five recording modes Manual Schedule Motion Detection Alarm and Motion Record Detection amp Alarm supported Selectable Record Quality Best High Mid Low and User defined Play progress bar supported Playback Multiple channel video audio playback simultaneously Play pause stop single frame forward fast forward and backward up to 4 9ruple when playback 4 channels supported Operating Interface 20 Backup Multiple backup modes USB flash disk USB HDD USB CD RW and DVD RW supported The output format can be H 264 RAW IPv4 PPPOE client DHCP client and TCP UD
5. DDNS Click gt gt the DDNS setup screen will appear Glec a DDNS server and type in the DDNS address user name and password Auto Registration SlectactivatingAuto Register and click gt gt the register setup screen will appear Type in the register server IP port and register interval time File sharing After activating file sharing function the PC is able to access video files in DVR HDD via network neighborhood sharing file access methods Open Network neighborhood type in IP address for example 192 168 10 220 enter the login interface type in the Super Admin user name and password the shared files can be accessible now Open folder videoout 14 Note After player plug is installed video files can be played by Windows Media Player Email Setting Click gt gt the EMAIL setup screen will appear This function requires to take effect of the alarm linkage Enter the mail server address in the screen Support domain method login account password recipient sender mail address Pressing the Test button next to sender mail address will send a test email Mobile port port is the channel of mobile phone when the data transmission all the media and signaling data transmitted by this port FTP server select FTP upload and click gt gt to set FTP server IP user name and password The caught snapshot can be uploaded to the FTP server UPNP start UPNP select gt gt device will automatically find t
6. v SS Preview 19 Chapter Five Appendix 1 Specifications Table VI 1 Specifications DVR Type 4 channel DVR 8 channel DVR Linux 2 6 O S System Pentaplex operation record playback preview and network browse backup supported 4 channel BNC 1Vp p 75Q 8 channel BNC 1Vp p 750 Video Input PAL 625 line 50 f s PAL 625 line 50 f s NTSC 525 line 60 f s NTSC 525 line 60 f s SECAM 625 line 50 f s SECAM 625 line 50 f s Audio Input 4 channel RCA 2Vp p 6000 VGA Output 1 channel DIN 15 optional 800x600 60Hz H 1024x768 60Hz 1280x1024 60Hz 1440x900 60Hz WO intedace CVBS Output 1 channel BNC 1Vp p 750 Audio Output 1 channel BNC 2Vp p 600Q USB Interface Support USB storage device USB mouse USB burner RS422 1 port receiving and transmitting duplex supported Network Interface RJ45 10 100M self adaptive Alarm Input 4 channel NO NC Alarm Output 1 channel NO NC relay 30VDC 1A 125VAC 1A SATA Interface 1 SATA port 1 SATAHDD up to 1T supported Video amp Audio Video Compression H 264 Baseline Video Standards PAL NTSC SECAM PAL 352x288 CIF NTSC 352x240 CIF PAL 704x288 Half D1 2CIF NTSC 704 240 Half D1 2CIF PAL 704x576 D1 4CIF NTSC 704 480 D1 4CIF Frame Rate PAL 25F S CH 1 3 6 12 25 and user defined optional NTSC 30F S CH 1 3 7 15 30 and user defined optional Video Compression Resolution Video Output Bit Rate 32kbps 2048kbps 14M byte hour 922M byte hour
7. 1x 12x raus 4a EN lt lt 46x ee oe oe oe oe oe Speed 16X fast 8X fast Normal 1 2X 1 4X 8X fast 16X fast H forward forward playing forward forward backwards backwards Note When playback only one channel the image will display in full screen 6 Backup Enter lt Tool Bar gt gt lt Playback gt to search backup and playback the specific record files you needs Click Backup to enter into the backup screen System will detect all the backup devices available and display them Please select the suitable device and record type according to requirement first and click Backup to start storing Note The record types include H 264 Raw MP4 and AVI When backup in MP4 types the special player plug will also be backed up into USB together automatically After player plug is installed the stored video files can be played by Windows Media Player 13 7 Alarm Settings Please make sure that the alarm input and output cables are connected correctly Please refer to 2 6 Rear Panel Connection for details Select lt Tool Bar gt lt System gt lt Alarm Setting gt to configure alarm parameters in the pop up screen Note All the settings will take effect after being saved 1 Alarm Input The alarm input attribution includes N O and N C Please select a suitable attribution according to the types of alarm device connected and control modes of alarm device adopted N O Normally open Circuit connected when
8. 3 Description of record type Users are free to select a week day or the day of a period of time System provides a recording option for hours every day ora week day Unit is hour One grid indicates one hour Move highlight icon to a time grid using Direction buttons 2 Specify the recording type by repeat pressing OK buttonor double left clicking mouse the color of the grid will change relevantly 3 Select OK to confirm settings The settings will take effect after being saved Note User can copy the current setting onto the neighboring grid by pressing Fn button first Direction buttons secondly and then the Fn button again to exit Or user can drag mouse to set Note2 When motion detection recording is selected the motion detection sensitivity and area should be set ahead Please refer to 4 4 2 Motion Detection Settings for details When alarm recording is selected the alarm triggering settings should be set ahead Please refer to 4 7 2 Event Handling for details 4 Camera Control 1 PTZ Control PTZ Settings Enter lt Tool Bar gt lt System gt lt Video gt to set camera channel protocol baud rate and ID Note The different PTZ controlled by one PCI should have corresponding PTZ ID There are 256PTZ ID supported currently 0 255 PTZ Operations In preview mode select a tile first in 4 9 16 splits view mode the selected tile is with highlight greenborder using mouse or Numbers buttons and then e
9. Note If PPPoE or DHCP is selected user has to check IP address again after restarting device Note2 If it is the first time login through IE please install the Active X of IE and type in user name and password Default user name and password are Admin case sensitive If the plug inscan not be downloaded normally please lower IE s security level Click Tools and choose Internet Options in the IE menu bar to enter the Internet Options page Choose Security and click Custom level to enter the Security Settings page Enable ActiveX controls and plug ins Click OK to save the settings Note3 Compared with the local side the added settings on IE Web client side are as the table below Table V 1 Settings added on IE side lt Server gt Tab Name of DVR is configurable on Web client side lt Channel gt Tab The channel OSD is User defined lt Device gt Tab User can adjust DVR time accordance with PC time lt State gt Tab Device states can be viewed directly 3 Web Screen Description KC erse BE O Address Display the DVR IP address Tool Bar F remem Gite PS zt viel al ES EI EE The description of icons from left to right is Configure device parameters Search and playback record files View logs and export them Set the storage directory of record files Click to switch image view modes among full screen single split view mode and 4 9 16 splits view mode User Admin Logout Reboot Clear
10. alarm single triggered N C Normally connected Open when alarm single triggered 2 Alarm linkage The alarm triggered event handling include record alarm output PTZ sound output alarm zoom out E mail report to center FPT upload file The channel alarm input can zoom display interval 1 10s optional If the display interval time is set to off the zoom display will be invalid After using the zoom out image Alarm zoom out report to center IE client preview will Zoom out simultaneously Note if user wants to set alarm triggered record please set the record schedule first at Record Schedule Notez2 if user wants to set alarm triggered PTZ please select the channel number first and then to set only preset 1 can be selected Note3 After alarm email will be sent immediately with the attachment of the caught snapshot Note4 Once FTP server is set FTP will upload file after the alarm FTP server will receive the caught snapshot 3 Alarm Defence and Schechle User can enable customized schedule in advanced menu which is similar with the schechle of record In the alarm defence status the icon of alarm input will appear as yellow 4 DEVICE EXCEPTION ACTION Select lt DEVICE EXCEPTION ACTION gt Enter Device exception handle screen Choose among these three options HDD full network disconnect and IP conflict For the hard full setting user can select alarm output sound report to center ema
11. audio are synchronous You can select either mixed stream or individual video stream Four level selection of record quality and self defined bit rate and frame rate supported Adjustable video parameters Multi area motion detection OSD of channel name and time supported Recording Manual record and schedule record supported The schedule record types include timing motion detection alarm motion detection alarm SATA harddisk supported Backup and clip record files through USB flash disk portable USB HDD and USB CD DVD RW supported Preview and Playback Simultaneous output of VGA and TV Up to 4 channels playback in fast play mode slow play mode rewind and single frame forward supported OSD of channel name and time supported Status displaying of local record alarm and motion detection supported Control Controlling of PTZ and dome supported Controlling multiple DVRs with one RS485 keyboard Setting and calling preset sequence and track supported Alarm Local alarm includes exception and motion detection video loss and hard disk full triggered handling supported Alarm linkage triggered record linkage alarm output and linkage PTZ preset sound alarm report to alarm center linkage channel single screen display and E mail Network TCP IP supported PPPoE supported Dynamic access to IP address Dynamic Host Configuration Protocol DHCP supported DDNS supported Visit video files in DVR HDD thro
12. between different software versions and operation systems without being noticed 25
13. button again to exit copying 3 Repeat steps 1 and 2 to set the second area Press ESC to exit setting In the Motion Detection Settings users are free to select a certain day of the week or a period of time within a future day Smallest unit is one hour One block indicates one hour System provides a recording option for hours every day or a week day 3 Mask Setting Mask setting function can make some regions of the image invisible These regions in preview image and playback image areall filled with black pixels The method to set maskis similar with motion detection setting You can right click mouse in the area where mask have set to cancel this function You can stop setting when you right click mouse in one area where havenomask setting There are four regions can be set in one channel 5 Playback File Search 12 Specify the date time and channel number by selecting lt Tool Bar gt lt Record Search gt Click Search in the pop up screen to start searching The searching results will be list on the screen in responding different colors so as to distinguish different record types Please see Fig IV 2Record Schedule for details of colors description stop 3255 FiglV 2File Search User can click mouse or use panel to specify time Panel operation move highlight icon to relevant selection box using lt buttons Move highlight icon to date time selection box modify time using A V buttons Move hig
14. can stop the progress of upgrade by clicking Stop Upgrade Adjust Time Click Adjust Time to adjust time of device accordance with the PC time State The information of HDD and channel state is contained here 5 Playback Click Playback the playback screen will appear It includes file search playback and download File Search The file search part is on the right upper side of the screen please set target type start time and end time there Then click Query to start searching The result will list on the table Specify the files in the table list and click on the playing control button or download button to do the relevant operations Query Target Localhost v Channel 11 Kind All Record M Beigin 2009 07 10 00 00 00 Ad Query End 2009 07 10 09 21 09 v File Playback The play control screen is on the left side of the screen It includes image display area play control bar and channel information Click Play the record files selected will be displayed in time order The progress of playing is shown as the figure below 00 58 29 58 The playing control bar is shown as the figure below The descriptions of all these icons from left to right are follows al A ESO CE Play NM Pause IE stop Ri Go to next frame Fast play option The speed of playing will be doubled by each clicking It includes 2X 4X 8X and 16X Slow play option The speed of playing will be half down by each clicki
15. ctaterine saan cuneunasaania ips bid otuunaaucbaadsdiousessnnct nan yatnae lassen ieroceeanouniamaaeeaerael 18 10 AG AMC tS STNG E 18 Ree En b E 20 Kee 20 2 Methods of Calculating HDD Capacity E 21 1 Calculate the maximum capacity of the build in Nard dek 21 2 Calculate the compression bit rate for recording T hours 21 3 Default Mee 21 4 Introduction of Mobile phone Monitor 23 1 Configuration of server DVR isis ate sneusevierscesnaieisvananesnnes avntanuen decane wiensudinsendsssvueneiiiand aaaniws 23 2 Installation and running of client mobile phone pDrocecdure 23 Chapter One Introduction 1 Brief Introduction This Series DVR is 4 channel playback H 264 main profile stand alone DVR with Pentaplex function record playback live preview remote preview and backup supported With professional and high performance intelligent audio amp video solution user friendly GUI and practical industrial designs this series DVR is quite suitable for civil applications such as home stores Internet bars and small offices besides the common security amp surveillance applications 2 Main Features Compression 4 8 channel PAL NTSC SECAM video input and H 264 compression standard with each channel being compressed independently in real time CIF resolution or non real time D1 2CIF resolution 4 channel audio input and G 726 ADPCM IMA compression standard with each channel being compressed independently in 24Kbps Compressed video amp
16. is a running route of camera that passes through multiple presets Set sequence Sequence 1 Select preset number you want to call Click on set button Ki 2 Repeat step 1 and 2 to add the other presets till finishing Click i button to end setting Click on E button to clear sequence Track is a continuous running route of camera Set track 1 Click on Kl to start setting Track 2 Move camera as the track and pattern you want it to run 3 Click on Ka again to finish setting Click on Ki to run track and click again to stop running Note Whether Track is supported or not is depending on the type of PTZ Note IE side supports 5 auxiliaries setting Local side supports 3 auxiliaries 2 Motion Detection Settings Motion detection settings include sensitivity and area The sensitivity includes three levels High Mid and Low Please select lt Tool Bar gt lt System gt gt lt Video gt gt lt Motion Detection gt to set Mouse Operation Drag mouse on screen to create grid Panel Operation There are totally 16 X 12 blocks in screen Move highlight icon among the blocks by using al buttons Please follow these steps below to set 1 Move highlight icon to one of the blocks you want to create by using al buttons Press OK button to confirm The created block will be in highlight blue 2 Press Fn button to copy the current configuration and press Direction button to copy to the relevant grid Press Fn
17. Auto maintenance Please enter lt tool bar gt lt system gt lt maintenance gt Maintenance will not reboot automatically if auto maintenance is off There are three types of maintenance per day per week per time 10 Advanced Settings Note Operation of this chapter needs permission referring to the current user s authority please using Admin to log in 1 Settings of System Please enter lt Tool Bar gt lt Setting gt lt System gt Advanced Setting gt gt Select lt PREVIEW CRUISE gt J gt gt to enter the setting screen Set the preview cruise interval 1 4 9 cruise way It will take effect after saving the settings the screen will be cruised in accordance with the setting intervals over the segmentation preview Set lt PREVIEW CRUISE gt is not enabled the preview will be back to the initial interface after saving the setting 18 Select lt DVR IDNUMBER gt the number can be entered 1 99 The remote controller and 485 keyboard can control device one to one when setting the same number select lt SPOT SETTING gt gt gt gt to enter the setting screen Set SPOT channel and time the DWELL time decides a period of channel which be slected Click Add to add the channel to the Matrix output After being saved the video output will take effect All of video channels connected with video inputs of DVR can be sequentially switched for SPOT monitoring output Select lt DST gt gt gt to enter DST setti
18. Camera Control Note E side supports 4 auxiliaries setting 4 Device Parameters Settings Click Psm the parameters configuration screen will appear All of the configurations are divided into the following six selections Server ras Channel amp serial L Alarm D user D device A state Server It includes the configuration of server network and version information All of these configurations can be set in Tool Bar System Note If the DHCP mode selected the IP address is assigned automatically without being modified Channel User can set motion detection video loss OSD image bit rate and frame rate image parameters and record schedule here Note User is allowed to set single channel first and then to copy the settings to the other channels Serial User can set PTZ protocol baud rate and address code here All of these settings can be done by selecting from Tool Bar System VideoSetting Alarm User can set IO alarm and event handling here All of these settings can be done by selecting from Tool Bar System Alarm Setting User Management Including user authority and password setting Relevant interface information should be Tool Bar System 16 System Setting Advanced Setting gt gt User authority and password can be changed by Admin Device Upgrade Click Browse to select the software package needed and click Start Upgrade to progress User
19. DEFENDER INSTRUCTION MANUAL www DEFENDER USA com Protect what you value most IMPORTANT PLEASE READ DO NOT RETURN THIS PRODUCT TO THE STORE Please contact a DEFENDER customer support representative first regarding any additional information on product features specifications or assistance with setup Please contact us via one of the methods below Support www defender usa com support Online live web chat Visit www defender usa com For more product information visit www defender usa com Note This is manual version 1 0 you may find updated versions by visiting our website WARRANTY INFORMATION PRODUCT WARRANTY INFORMATION Please visit our website at www defender usa com for information about your product s warranty We take quality very seriously That is why all of our products come with a one year warranty from the original purchase date against defects in workmanship and materials If you have warranty or support issues please contact us using any of the following methods Support www defender usa com support DEFENDER USA DEFENDER CANADA Website www defender usa com 60 Industrial Parkway 264 4080 Montrose Road Cheektowaga NY Niagara Falls ON USA 14227 Canada L2H 1J9 Warranty Terms 1 DEFENDER products are guaranteed for a period of one year from the date of purchase against defects in workmanship and materials This warranty is limited to the repair repl
20. P protocol supported The Web Client and Client Application Software are provided for remote configuration Network video browse local recording local and remote playback and remote PTZ control Network transmitting supports independent coding The time delay of LAN is less than 300ms Log The log of operation and alarming will be saved automatically User can directly play Operation the record files that being record when the alarm event occurs Multiple protocols Pelco P Pelco D and Samsung etc supported Upgrade of protocol supported PTZ Control Multiple PTZ operations Pan Tilt Zoom Preset Sequence Track and Auxiliary Switch supported 4 channel alarm input NO NC supported Motion detection and alarm of video loss supported Trigger recording Linkage PTZ preset and Bee alarm supported The alarm information can be sent to Web Client or Client Application Software through network Account Multi account supported Users can set amp recover password Management authentication management Auxiliary Hardware Watch Dog supported Device will be restarted if operations being not Function responded for 30 seconds or more 2 Methods of Calculating HDD Capacity 1 Calculate the maximum capacity of the build in hard disk Timing Recording Step 1 Calculate the maximum capacity of the hard disk needed in selected channel per hour suppose as Si MByte i is the channel number and suppose the bit rate of the cha
21. acement or refund of the purchase price at DEFENDER S option This warranty becomes void if the product shows evidence of having been misused mishandled or tampered with contrary to the applicable instruction manual Routine cleaning normal cosmetic and mechanical wear and tear are not covered under the terms of this warranty The warranty expressly provided for herein is the sole warranty provided in connection with the product itself and no other warranty expressed or implied is provided DEFENDER assumes no responsibilities for any other claims not specifically mentioned in this warranty This warranty does not cover shipping costs insurance or any other incidental charges You MUST contact DEFENDER before sending any product back for repair You will be sent a Return Authorization number with return instructions When returning the product for warranty service please pack it carefully in the original box with all supplied accessories and enclose your original receipt or copy and a brief explanation of the problem include RA This warranty is valid only in Canada and the continental U S This warranty cannot be re issued CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN UNIT TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE THE COVER BACK NO USER SERVICEABLE PARTS INSIDE REFER SERVICING TO QUALIFIED SERVICE PERSONNEL Contents PPAR NC e EE 4 hg eler MOM arts siscarceniesaacaaus teste onelvan a a E a ea 4 2 Main F
22. be displayed on the screen 1 Channel Status Display Area Under preview mode channel shows current input image and channel statues information video statues and mode motion detection View Mode Switching When in 1 4 6 8 9 16 splits view mode the tile with high light green border is the current selected one User can use mouse or press Direction buttons to switch to another tile If the audio output device is connected the audio can also be previewed together with video The audio of current channel can be previewed besides in playback mode User can select to display a single particular channel by pressing the Numbers buttons When in preview mode user can enter into 1 4 6 8 9 16 splits view mode by pressing e 7 button directly or reverse Note For 8 channel DVR the view mode can be directly switched by tool bar Please refer to 4 2 3 Tool Bar Image Parameters Setting Please enter lt Tool Bar gt lt System gt lt Video gt gt lt Color Setting gt to set brightness contrast hue and saturation It will take effect instantly Note User can set image parameters of one channel one time or all channels together at once by selecting All in lt Camera Channel gt It is similar in other screen when user wants to set four channels together at once select All in lt Channel gt Note2 In preview mode brightness contrast can be adjusted by remote controller directly OSD Settings The OSD of channel name and s
23. cord PTZ preset zoom out alarm out Trigger alarm output arm Time synchronized Off on click into sub menu screen Alarm Zoom Out 110 seconds OFF f click into sub menu screen alarm out 4 Introduction of Mobile phone Monitor 1 Configuration of server DVR Setup device type in user name and password to log in Shown as the figure V1 3 below click Net and then click Next Page to enter into screen of Mobile port Sintec Hi E haidd be dierent pber pna 8 w i ste pieci eel babig amad FigVI 5Screen of DVR sub stream configuration FigVI 6Screen of DVR sub stream settings Shown as the figure V1 6 below to set FPS and Bitrate the frequently used frame rate is 3 fps and data bit 128 kbps 2 Installation and running of client mobile phone procedure Versions supported by client side are as follows English Simplified Chinese Traditional Chinese Client side of Symbian60 3rd Operation System English Traditional Chinese Client side of WinMobile5 0 6 0 6 1 Operation System iPhone mobile can be supported Note Let s take winmobile6 0 for example to show you how to install and run the procedure Download Mobile phone client side Enter into mobile phone system and type in IP address into IE address column in the form of http xxx xxx xxx xxx download html Then press Enter the screen shown as the figure VI 7 below will appear Select the corresponding client side software by using up and down button of mobile
24. e Software version display the version of software Release date for the current software 4 Format HDD Please make sure that all of the important record files have already being saved before formatting HDD Please stop all of the recordings in the beginning of formatting HDD And follow the prompts to operate 5 Lock out Please enter lt Tool Bar gt lt System gt lt Save Setting gt lt Log Out gt the preview screen will appear together with the log in box Please type in the password for other operation 6 Restore to factory defaults Please Enter lt Tool Bar gt lt System gt lt Save Setting gt lt Restore Defaults gt system will remind you of whether recovering or not Click Confirm to process restoring Note Please refer to Appendix VI for the default values Note2 The system language time camera P N system and network settings IP address subnet mask gateway HTTP port will not be recovered by restoring to factory defaults 7 Input output parameter Please enter lt tool bar gt lt system gt lt maintenance gt when USB is connected the device setting parameters can be exported to the USB device Parameters can import to the device from USB Reboot the device and the imported parameters will take effect Note When importing parameters from a USB device only import parameters from a DVR with the same SKU or model number Otherwise importing parameters may permanently damage the device 8
25. e for upgrade and click Start to upgrade User can click Stop to stop upgrading in progress 9 Maintenance Please enter lt Tool Bar gt lt System gt lt Maintenance gt or lt Save gt to enter screen of maintenance 1 Log view 1 Select the type of log to be searched All Operation Exception Alarm 2 Select the time scope to be searched 3 Click Search to display the detail information of log Note If the logs searched contains alarm event log user can directly play the video recorded during the alarm event happens by clicking on the right side of screen Note2 The maximum number of logs supported currently is 10000 The storage mode adopts overwrite mode continuously overwrite the oldest data when the database is full 2 Upgraede The upgrade modes supported now are USB IE Remote Software USB Please make sure the USB device is connected correctly and the upgrade applications have already being copied into USB root directory Please follow the prompts to operate After accomplishing upgrade the Restart prompt screen will appear Please restart the device the latest software will be installed automatically then IE Please refer to 5 2 2 Device Parameters Settings for details Remote Software Please follow the user s manual of remote software to operate 3 Device Information HDD Size display the current total capacity of HDD and the remaining capacity Hardware Version display the version of hardwar
26. e not designed for continuous DVR use Note2 Please format HDD for the first use or system will sent error notification of Hard disk error accompanied with audio alarm Please see 4 9 Maintenance for details 6 Rear Panel Connection Power Input Connect power adapter to Power Input interface of DVR Confirm that the DVR power supply input switch is positioned correctly for the local voltage before connecting and powering on the unit Turn on the unit The power LED will light if the power cable is connected correctly Note Please use the power adapter contained in the package Video Input The video input interface is standard BNC socket 1Vp p 75 Q Note The video signal cable should keep away from the interference of strong electromagnetism and city electric field Audio Input The audio input interface is standard RCA socket 2Vp p 600 Q Note The audio input resistance is a little bit high please use active sound collection device or active microphone And the audio signal cable should keep away from the interference of strong electromagnetism and electric field Network Input The network input interface is RJ45 10 100M self adaptive Note Confirm that the network band width is enough for transmitting high definition image smoothly Alarm Input and Output The alarm input device should be the type of GND connected alarm or voltage input alarm which can be set as N O or N C The requirement of signal input level f
27. ease enter lt Tool Bar gt lt System gt lt System Setting gt lt Time Setting gt to set date and time Video Standard Please enter lt Tool Bar gt gt lt System gt lt System Setting gt lt Video Standard gt to set video standard PAL SECAME and NTSC are supported Please setaccording to the parameters of camera Note1 Please make sure the HDD is not recording when you set the system time as it could cause an error while playing back recorded video Note2 Language and Time will take effect instantly Record Resolution and Video Standard will take effect after being saved Note3 when the resolution setting exceeds the range of the display please click ESC 2 ESC on the Front Panel or remote controller within 3 seconds to reduce the resolution to 800X600 60HZ Note4 Users can refer to the navigations on the bottom of the main screen to look for relevant guides Meanwhile navigation info will display take effect instantly take effect after being saved 2 Preview After start up system the screen haslive view area and tool bar Right click mouse in preview mode or press OK on the front panel the Tool Bar will appear System status colum can be draged to anywhere on the screen by mouse it will be back to the original position after device restarting The column can be hided by right clicking the mouse Videos OSD of channel name record time and alarm notifications will
28. eature S nienean eenstn sett E EREE E A EEEO AREE Eaa EEO E Pea EIEEEI ER EES 4 IR TN TE LE 4 WT eS CON ten tote noe EE 4 SEENEN 4 3 RearPanel ee EE 5 4 Remote As OMI NST EE 5 5 Hard Disk ImS tan is cdesicenei cvsienmerniancasdseiedGuasneoupecsnsuiedbeveiiebiisliedudpdeauntseneuilasidiucedadendenened inal 6 1 Installation ere ee H 6 6 Rear Panel COMMS CUO i EE 6 Illi MGT Description neir a dondoancdacauue ides a e ae ERA 6 eenegen 6 2 Menu Operations essione e a aaa aE E aE TE E E OEE E E TT ae 8 IV Operations EN 8 FTU EE 8 2 E 9 1 Channel Status Display Area 9 EE E EE 9 3N Tool Eeer eege 10 S ROCO EE 10 1 E RE DEE 10 2 Record Bo oq 2 ie 0 eae eee een eee ee en emcee er ene ere ere Te ere eee eee er ttre errr 11 4 Camera en EE EE 11 EK CAE ORO E 11 2 Motion Detection Settings eet 12 3 Mask Setting DEE 12 S5 ay 2 e 12 eege 13 7 Alarm SCT Sisconiaresuseasinecinieneneteinabineal entetveroewutuanitiiesassanbouduenbsiedlnisaiedtdutoonetsnubsenebinsiomiisatenauinanenenness 14 RE OU E 14 2 Alarm INI AS seeen E E a 14 3 Alarm Defence and Zahl den gege gee ENNEN ebe 14 4 DEVICE EXCEPTION FC TOI ME 14 8 Network ele EE 14 1 Network SC TING EE 14 2 Web e ET O D6 TAO I E 15 3 Web Screen RE le Te 15 4 Device Parameters SettingS cccccccccccsessssseeeeeceessassseeeeeeceeeeasseceeeecesseaussseeeeeseseseaaess 16 Ee 17 6 Bidirectional EE 17 Ce e EE 17 8 REMO DN AG Ee 18 9 GPS AOS satrtisprsesa nase
29. el to return to the upper menu without being saved Use lt gt to move highlight icon to any of the selection boxes Press OK button to switch to another selection status Use A V to specify the sub menu value where sub menu selections exist Exit User can click button on the right upper corner or single right click mouse or press ESC button to enter into the Save amp Exit screen You can select exit directly or exit after being saved Note There are two different ways to take effect take effect instantly take effect after being saved Please refer to the navigation for details Chapter Four Operations This chapter mainly describes the main system operations of DVR Please see the following contents for details 1 Turn on Start up The Power LED will light after powering on correctly Please refer to2 6 Rear Panel Connection for details of connection method Press Power on off button to start up device The preview screen will appear After pressing ESC button of panel or remoter or right clicking mouse the login box appears Please select proper user and type in relevant password to log in Note It costs about 60 seconds to start up please wait for a moment Note2 Modify password by selecting lt Tool Bar gt lt System gt gt lt System Setting gt lt Password Setting gt Set as indicated new password will take effect instantly Note3 Default password for Admin is 111111 Default password for U
30. els supposed as Dc is Dc Dt 8 1024 3600 Dt 2 2756 Kbit s 3 Default Values Alarm Management 21 Options in menu Default Video Standard Auto adjust 800x600 60Hz 1024x768 60Hz 800x600 60 Hz Se EE 1280 x1024 60Hz 1440x900 60Hz Time Format Time Format Time Setting year month dayhour minute PM Password setting Admin 111111 User 111111 System HDD Overwrite Reach the maximum number of users SEHR Add user Click into sub menu screen Preview Cruise Off on Cruise time 2 5 10 15 20seds cruise mode 1 3 9 Menu time out setting Off 30seds 1min 5mins off Channel lock setting Click into sub menu screen R r istribution De se distribution Glick into sub menu screen Record Schedule Click into sub menu screen 24 hours Video quality Best High Mid Low Best Record Frame Rate PAL Full 12 6 3 1 User defined Full NTSC Full 15 7 3 1 User defined SECAM Full 12 6 3 1 User defined Record Resource Video Video amp Audio Video amp audio Channel name Channel name and OSD Setting timestamp timestamp none Record Resolution CIF Half D1 Di CIF Sub code Frame rate and data bit user defined settings On Frame rate 1 15 fps Frame rate 5fbs Date bit 32 512 kbps Data bit 96 kbps Pelco P Pelco D Samsung Panosonic yaan yiboer p elco p_call98 vis pelco d_jabsco pelco p_Ix vido Handy syyt pelco d_cg pelco d_ Ix pelco d_cf pelco d_mj pelco p_mj pelco d_hd pelco d_d
31. ertba Hemoate Aatbgpzftbe PTZ Gantral PTZ Goatral Mangal Meard Manual Record Playback Alayback Soe ite Settini Clear Amm Clear Ginen Shai Uig Reheat Preview Fig IV 3AuthoritySetting Move highlight icon to anoption using Direction buttons Press OK button or click mouse to select the option 3 Advanced Setting of Record Please enter lt Tool Bar gt lt Setting gt lt Record gt Advanced Setting gt gt lt SUB STREAM gt select Enable press gt gt key to enter the setting screen Then user can customize the sub stream frame rate and bit rate Sub stream support frame rate 1 15 bit rate 32K 512K 4 Advanced Setting of Video Please enter lt Tool Bar gt ering BuzzeVideo gt d Advanced Setting gt gt MOTION HANDLING After the setting area moveingmotion theincident could be linked to those handling RECORD ALARM OUT Buzzer UPLOAD Note Please refer to 4 2 2 Motion Detection Settings for the setting of detection area and sensitivity VIDEO LOST HANDLING After the slected video channel being lost the incident could be linked to those handling ALARM OUT Buzzer UPLOAD CHANNEL NAME SETTING After the slected video channel being lost the incident could be linked to those handling ALARM OUT Buzzer UPLOAD User can input the channel name through the soft keyboard It only support letters select the OK to confirm the settings ba z an 7
32. f Single splits view 4 splits view 6 splits view 8 splits view 9splits ser 16 splits view Fast switch TV and VGA Menu will not be available on the current screen only a preview image To adjust the screen 8 pixels per unit W E To reduce or increase screen in vertical direction EJ To reduce or increase screen in horizontal direction DG To move the screen up down left right H To zoom out the screen to largest and show in central Note When mouse moves to the tool bar icon the indication information will come out to help users to understand Note2 When video source is PAL screen display range max is 720 576 When NTSC screen display max 720 480 Note Switch display menu between VGA and TV by selecting ESC 1 ESC sequence must be pressed within 3 seconds on the remote control or Front panel 3 Record Record type contains manual record and schedule record The priority of manual record is higher than schedule If the record schedule is conflict with manual record the manual record will be processed firstly until the manual record being canceled Record types include common recording alarm triggered recording motion detection triggered recording alarm motion detection triggered recording Each of them is indicated with grid of different color and each color indicates a particular record status Please see Fig IV 2record schedule for deta
33. he intranet modem UPNP service and map the HTTP signal media cellphone port and return the map result and modem s internet IP After mapping is successful user can access the IE client from an internet enabled PC through the internet IP IP ACCESS When turned off any PC can access the device When black list is in use a PC with an IP entered in the black list cannot access the device s IE client but PC not on the list can access it When white list is in use a PC with an IP entered on the white list can access the device s IE client but other PCs cannot access it Time synchronization Click gt gt to start synchronization the device can automatically synchronize by setting the server name synchronization interval time zone Note All of these settings of network will take effect after being saved Note2 Currently only support PPPoE mail server with SMTP protocol Note3 Enter into mobile phone system and type in IP address into IE address column in the form of http xxx xxx xxx xxx download html Versions supported by client side are as follows English Simplified Chinese Traditional Chinese Client side of Symbian60 3rd Operation System English Traditional Chinese Client side of WinMobile5 0 6 0 6 1 Operation System iPhone mobile can be supported Please refer to Appendix5 Introduction of Mobile phone Monitor for theDetails 2 Web Client Operation Open IE browser type in IP address the log in screen will appear
34. hlight icon to channel selection box press OK button to select it or cancel selection Move highlight icon to RyRy press OK button to zoom in zoom out timeline time ruler If the timeline is out ofscreen please move highlight icon to EI and press OK button to display the part out of screen in order After setting time channel number and timeline move highlight icon to Search using lt gt buttons and press OK button to start searching After searching over press Fn button to pop up the timeline for selecting start point Press lt buttons to move timeline press Fn to confirm selection Press Fn again to pop up the second timeline for selecting stop point press Tal gt buttons to move timeline press Fn to confirm selection After all settings move highlight icon to Play using lt gt buttons and press OK button to start playing move highlight icon to Backup using lt gt buttons and press OK button to backup Playback Control ga H RW Ip pt V Fast backwards the availablefast backwards speeds are 8X and 16X Pause the current play or stop the current pause Stop playing Click to control speed of Forward the available forward speeds are 1X 2X 4X 8x 16x 1 2X and 1 4X Go to next frame Click to switch from single split view mode to 4 9 splits view mode or reverse The status of playing will be displayed on the right upper corner of screen gt gt 16X gt
35. il Network disconnect and IP conflict can only be set to alarm output sound After this setting has been saved device exception will be handled the way user has selected 8 Network operation 1 Network settings Please enter lt Tool Bar gt lt System gt lt Network Setting gt lt Network Connection gt there are three connection types Static IP DHCP and PPPoE Static IP If this type selected please type in IP address subnet mask and gateway User can ping network to check its connection status DHCP If this type selected a DHCP server should be set in network A dynamic IP of device will be assigned automatically and displayed on IP Address column PPPoE Click gt gt the PPPoE setup screen will appear Type in user name and password and click OK to confirm System will dial automatically After accomplishing dialing the IP address will be assigned and displayed automatically on IP Address column User can save the user name and passwordeven if the dialing is not successed The following are types of ports HTTP Port It is the port number of browsing through IE Default is 80 Signal Port It is the first entry port for communication between web client and device which is mainly used for controlling of log in log out real time preview remote playback and remote download etc Media Port It is for media stream transmitting including real time stream voice stream and file stream etc
36. ils Record resolution The device support CIF HALF D1 D1 format Record quality Best 768Kbps High 640Kbps Better 512Kbps Common 384Kbps And User setting can help user to set one bit rate up to 2048Kbps Record frame rate if the current selection is PAL the frame rate options are All 12 6 3 1 Customized If the current selection is NTSC the frame rate options are All 15 7 3 1 Customized Default is All 25 fps for PAL and 30 fps for NTSC Record Resource Video for video only or Video and Audio for recording video and audio Note Please refer to Appendix 6 2 for the methods of calculating HDD capacity 1 Manual Record Please enter Tool Bar gt lt Manual Record gt to let the specific channel record or not Press e button to start stop recording manually Note1 The type of the video recorded manually is common recording Note2 The highest priority of record mode is manual record 10 2 Record Schedule Please enter lt Tool Bar gt lt System gt lt Record Setting gt to set record schedule The setting screen is shown as the figure below Record Scheme All Sun Mon Tue Wed Thu e no record icommon record BR move and alarm record E move record P alarm record FiglV 2Record Schedule OU The current recording channel number 2 The record schedule
37. ng It includes 1 2X 1 4X 1 8X and 1 16X OR Enhance contrast 5 Reduce contrast E Enhance brightness E Reduce brightness Open close voice E Co to previous file Go to next file and is enabled only when multiple record files being selected to play K Snapshot the storage directory can be set on the pop up screen by clicking Local Storage The information of the record file selected will be displayed in the area shown as the figure below It includes device s IP address current play speed channel number and start end time of the record file Target 172 1 10 220 Play Speed normal Channel 1 Time File Download The File download operation part is on the right bottom of the screen Click l l to set the storage directory of the file selected Click Download to start downloading 6 Bidirectional Talk Click in the Tool Bar to enable the bidirectional talk between Client Web and DVS side A microphone should be connected to the device through the Line in interface Click again to stop talking 7 Log Click Loss the screen of device logs will appear There are four options for choosing All according to time according to type according to time and type To search logs please select the search mode and channel number needed first and then click Search to progress Click Export to export logs in html format 17 8 Remote Upgrade Select lt Server gt lt Manage gt click Browse to specify the fil
38. ngs User can set beginning and ending dates and time of DST Device will automatically adjust the time after being saved After started lt menu timeout gt when there is no any mouse motion on the menu timeouts settings screen for a while preview screen and search screen control device will automatically lock the screen User need to re login to unlock the screen PTZ video playback and back up screen are never be locked Select lt channel lock gt gt gt to enter channel lock setting screen Click the channel as wanted and select OK User can not see the locked channel after login out Only Admin can set and unlock channel lock settings Note lt system setup gt lt advanced settings gt user can set recourse distribution mode code mode and playback mode 2 User management Please enter lt tool bar gt lt setting gt lt system setup gt lt advanced setting gt Select lt ADD USER gt gt gt gt to enter the settingscreen the password of new user is 111111 user can enter lt Tool Bar gt gt lt Setting gt gt lt System gt lt Password Settings gt to modify the password Select lt DEL USER gt gt gt gt to enter the settingscreen Admin can delete the specified user Select lt AUTHORITY MANAGE gt gt gt gt to enter the settingscreen select lt AUTHORITY MANAGE gt gt gt gt to enter the settingscreen Authority setting contains the authority optionsof local and remote DN Local ugh
39. nnel selected as D Kbit s The formula of calculation is Si D 3600 8 1024 D 0 439453125 MB Step 2 Confirm the storage time length suppose as T hours The total maximum capacity of the hard disk needed in selected channel for T hours suppose as St is St T S1 Step 3 Confirm the total numbers of the channels suppose as n The total maximum capacity of the hard disk needed suppose as Sc is Sc S1 S2 Sn Alarm Recording Suppose the rate of alarming as a The capacity of the hard disk needed in alarm recording supposed as Sa is Sa Sc a 2 Calculate the compression bit rate for recording T hours Timing Recording Step 1 Suppose the capacity of the hard disk as S the total numbers of the channel as n The capacity of hard disk needed per channel supposed as Di is Di S n Step 2 Suppose the total recording time as T hours The capacity of the hard disk needed per hour per channel supposed as Dt is Dt Di T Step 3 The bit rate of all the channels supposed as Dc is Dc Dt 8 1024 3600 Dt 2 2756 Kbit s Alarm Recording Step 1 Suppose the rate of alarming as a capacity of hard disk as S the total numbers of the channel as n The capacity of hard disk needed per channel supposed as Di is Di S n a Step 2 Suppose the time length of recording as T hours The capacity of hard disk needed per hour per channel supposed as Dt is Dt Di T Step 3 The bit rate of all chann
40. nter lt Tool Bar gt lt PTZ Control gt to the PTZ Control screen that described as the table below Table IV 1 PTZ Operation Description Oo OO OO dk Table IV 1 PTZ Operation Description Click the arrow icons to control direction of PTZ Direction Click the center icon D to call sequence or run scanning Please refer to the PTZ manual for details of PTZ scanning mode Set the turning speed of PTZ camera 8 Advanced Click E and to show hide the advanced setting screen the part under the blue bar SI Foci Click to focus in and focus out it is disabled for cameras with automatic focus e i Click to make the image brighter or darker it is disabled ns for cameras with automatic iris adjustment Open close auxiliaries Click ito open and click EJ to close Different functions Auxiliary respond to different protocols The auxiliaries include light rain brash and power etc please refer to PTZ manual for details NOTE Up to 2 auxiliaries are supported on device side Up to 4 auxiliaries are supported on client web side 1 Select the preset number in the preset window 2 Position the camera as desired position Save the position by clicking D Repeat the step 1and 2 to reset the desired position Preset Call preset Select the preset number you want to call and click on the go to button el Clear reset preset Select the preset number you want to clear reset and click on the clear button Ka Sequence
41. operations in menu mode 2 Press it to select record type in setting schedule 3 Press it to change status of the current motion detection block 7 B o Switch from single screen and multi screen 1 Press it to switch from single split to multi splits view mode or reverse in preview and playback mode FN 2 Press it to enter exit continuous selection when setting motion detection area and schedule record 3 Press it to set start time and end time in file search 10 n 2 13 14 2 One key file search 16 Kl vE jse o o o ei ml 5 Arrow Buttons play in slow mode fast rewind fast forward 5 Hard Disk Installation The hard disk is not included in factory fittings Users can mount suitable hard disk by calculating its capacity referring to Appendix 5 2 Methods of Calculating HDD Capacity 1 Installation procedure Open the DVR case Mount the 4 shock absorption washers into the clamping slots four protruding steps in the case Connect the HDD data cable and HDD power cable to HDD Attach the hard disk to the shock absorption washers by aiming installation holes to the case hold and fix them by 4 M3 12 Head Screws plus plain washers Connect the HDD data cable and HDD power cable to the respond interfaces of main board Replace the DVR top cover and fix it by screws Note7 If installing your own HDD please be sure to purchase a DVR Rated HDD instead of a Computer Rated HDD Computer Rated HDDs ar
42. or voltage input alarm type is low level 0 2V high level 5 15V The green angle pins of signal cable are supplied for access of PTZ and alarming devices Please follow these steps to connect 1 Pull out the angle pins that inserted in the alarm input and output interfaces 2 Screw out the screws by micro Philips screwdriver insert the signal cable into interface under spring and then tighten the screws 3 Plug in the connected pins into green angle pin socket PTZ Input Connect the PTZ control interface to RS485 interfaces of rear panel The connection method is similar as above Note Please refer to PTZ manual for setting specific parameters for some PTZ devices contain multiple telecommunication protocols baud rates and IDs Video output VGA Monitor Input Video output interface TV andVGA which can work together simultaneously Note VGA and TV cannot be in the operation interface simultaneously but be switched by mouse panel and remote control in the menu Chapter Three Introduction 1 Brief Introduction Figlll Menu Structure Language Video Standard VGA Setting Time Format Time Setting Password Setting Video CH Setting Manual Record Record Search
43. phone 23 Symbian S60 3rd English Version FigVI 7Screen of download mobile phone side software Channel Cam01 v Setting DIE HIE Moder ia FigVI 8Main screen of mobile phone monitor software After finishing installation please select QQeye in the start up menu Setting Click Setting on the Fig VI 8 the fig VI 9 shown as below will appear Type in the right User Name and Password which must be according with the user name and password on DVR side Type in the IP address on Server column Type in the Port for connection such as 7050 Click OK to save and exit the screen w E D em tt eatetK FigVI 9Screen of mobile phone settings FigVI 10 Preview screen of mobile phone preview Click Connect on the Fig VI 8 the fig VI 10 shown as the figure below will appear after several seconds of buffer You can select the channel that you want to preview by selecting in the pull down menu of Channel column Or you can click Disconnect to stop preview Operations 24 SS EE Fig 5 11 Buttons operation of mobile phone EERRc Ola e all of these buttons are operated by PTZ From left to right they are Turn Left Turn Right Move Up Move Down Zoom out Zoom in Focus far Focus near Enlarge Iris Narrow downlris is for capture picture Note Thanks for using our products The installation above is take operation system of Windows Mobile for example There may be some differences
44. ser is 111111 Admin password can be restored to factory defaults by short circuit JP 1 on main board After logining the DVR by Admin the Admin user can change user s password The system support 8 users and the Admin is the manager user with all permissions whose name cannot be deleted or changed The Admin user can add and delete all other users and the permissions corresponding Note4 The DVR will buzz and NO Hard disk appears when without hard disk User can choose whether to buzz or not when without hard disk Note5 The DVR can identify display device automatically When connected either to VGA or TV the menu will be on the specified screen automatically after start up when connecting VGA and TV simultaneously two images will be displayed on the screen the menu will be on the VGA firstly User can switch by clicking in the tool bar System settings Language Please enter lt Tool Bar gt lt System gt lt System Setting gt lt Language gt to set language VGA Resolution Please enter lt Tool Bar gt lt System gt lt System Setting gt lt VGA Resolution gt to set VGA resolution and refresh rate It supports800x600 60Hz 1024x768 60Hz 1280x1024 60Hz 1440x900 60Hz currently Please select relevant values according to the parameters of VGA Date Time Please enter lt Tool Bar gt lt System gt lt System Setting gt lt Time Format gt to set time format 12 hours and 24 hours are supported Pl
45. t pelco d_jg jy2000 pelco d_dsx pelco d_qg pelco d_fh pelco d_htz pelco d_xz pelco d_pts td500 clt 618 philips pelco d_jg PTZ Baud Rate 1200 2400 4800 9600 2400 PTZ address Click into sub menu screen Channe 1 Color settings brightness contrast hue and saturation 6 6 8 8 6 6 8 8 Channel name and timestamp Video settings PTZ protocol Pelco P Highest Sensitivity Normal Sensitivity Low Sensitivity Event Handling buzzer upload email Video loss handing Alarm out sound report tothe center mm OOOO Static IP Dynamic access of IP PPPoE Static IP Network IP Address Click into sub menu screen 192 168 0 10 etwor Settings Subnet Mask Click into sub menu screen 255 255 255 0 Click into sub menu screen 192 168 0 1 HTTP Port Click into sub menu screen eo Motion Detection Normal Sensitivity 22 Command Port Click into sub menu screen Media Port Click into sub menu screen PPPoE Setting ON OFF Click into sub menu screen O PPPoE address Click into sub menu screen Network DNS address Click into sub menu screen Settings Dynamic Domain Name ON OFF Auto Register ON OFF File Sharing Click to select or disselect Email Setting Click into sub menu screen Mobile Port Click into sub menu screen UPnP setting Off on click into sub menu screen O Dedicated server Off on click into sub menu screen O FTP setting Off on click into sub menu screen O O H 3 O i ff i ff i ff re
46. tes alarm output When alarming outputsoccuring it changes into red 2 system status bar In preview mode the system status bar will display current system status including External alarm input Alarm output hard disk capacity number of the client connection system time E Indicateshard diskbeing ok The number indicatesthe percentage of the total capacity of the hard disk GF Indicates Hard disk error Or No hard disk il Indicatesclient connection The number shows client linking number E Indicates No client connection 3 Tool Bar Right click mouse or press OK button in preview mode the Tool Bar shown as below will appear Ser eooo Ela FiglV 1 System toobar D Hide the tool bar EJ System configuration Please see 3 1 Menu Structure for details E Manual record Please see 4 3 1 Manual record for details J Search playback and backup record files please see 4 5 Video Playback and 4 6 Videl Backup for details PTZ operation Please see 4 4 1 PTZ Control for details J Click to cancel alarm notification Click this button will pop a message to show the present alarm information Fa Fast playback User can enter 10 20 30 or 60 seconds before position to start playback and can also jump to a specified time in the video Fe Power off Click this button will pop a message of confirm password User has to enter Admin password to shut down G88 8 B C To set the preview mode o
47. ugh network neighborhood supported Real time preview downloading and playback remotely through network supported Controlling of PTZ configuring device parameters acquiring device status and logs and upgrade remotely through network supported Local recording through network supported Chapter Two Hardware This chapter is a general description of the device interfaces and connections It describes the way of hard disk installation the interfaces of the front panel and the rear panel for users to connect cables correctly 1 Package Content After purchasing DVR product unpack it and unload it on a flat floor or a place where it is to be located and refer to the Package Contents for counting device fittings 2 Front Panel Operation Tablell 1Front Panel Description Power Red when recording Green when non recording LED HDD Hard disk indicator Green or blinks when reading writing Black when non operation 3 RearPanel of Operation Tablell 2Rear Panel Description Discription 4 8channels video input BNC 1Vp p 75Q 1 channel TV output BNC 1Vp p 75Q 1 channel audio output BNC 2Vp p 6000 4 channels audioinput RCA 2Vp p 6000 1 RJ45 10 100M self adaptive a Power mm ooo 4 Remote Controller Tablell 2Rear Panel Description EC Function Buttons DEL Delete When in menu mode press lt gt to move to selection boxes press A V to select submenu parameters 1 Press it to confirm
48. ystem time is supported Please senter lt Tool Bar gt gt lt System gt lt Record Setting gt lt OSD Setting gt to set The channel name will be displayed on left upper corner and the channel time will be displayed on the righter corner of the screen Channel Status Display Area The channel statuses include motion detection triggered recording common recording motion recording alarm triggered recording external alarm input alarm output Indication of motion detection common recording alarm recording will be displayed on the right upper corner of screen The details are as follows indicates motion detection The settings of motion detection include sensitivity and area selection Please see Motion Detection Settings for details Blue indicates common recording Please see Record for details Green indicates motion detection triggered recording Red indicates alarm triggered recording Grey indicates manual recording Indication of external alarm input alarm output will be displayed on system status column or Tool Bar The details are as follows El The 4 8 icons indicate the alarm input status If alarm defence mode is set the icon is 3 otherwise it is D When alarming it changes into red D External alarm input can trigger multiple events handling please see Alarm Settings for details DI The 1 4 icons indica
Download Pdf Manuals
Related Search