Home

Cisco Unified Provisioning Manager Troubleshooting Guide

image

Contents

1. Troubleshooting Topics Hi e The subscriber s Domain does not have a Service Area that has Subscriber Template with TTS Enabled and Subscriber CoS with TTS Enabled configured Do the following e Assign an appropriate subscriber role e Update at least one Service Area within the Domain providing Subscriber Template with TTS Enabled and Subscriber CoS with TTS Enabled Cannot order some phone types for example Cisco 7912 IP Phone This can be due to the following e The phone type is not orderable for any role that is assigned to the subscriber e The phone type is not supported by the Call Processor within the subscribers domain e The phone type does not support any protocol that is configured on the Service Area within the subscribers domain Do the following e Assign an appropriate role for the subscriber e Select a different phone type e Reconfigure the Service Area Reserved Directory Number is not picked up for an Auto Assigned Line Auto Assigned Line picks up a directory number from the Directory Number Block configured on the selected Service Area Select the Line and then provide the reserved directory number When placing an Enhanced Phone Service order or a Voicemail order the following error message appears The Service Area requires that the values for firstname lastname and voicemail display name be comprised of only alphabetical characters Please select a different Service Area or change user
2. Specified delete for device Domain or Service Area is failing because the server is not in maintenance mode Using the same account log into the user interface and turn on maintenance mode NBI submit order succeeds but no resulting changes are seen on the device Order may have been submitted with a validate attribute of VALIDATE instead of VALIDATE_AND_SUBMIT Change the validate attribute to VALIDATE_AND_SUBMIT or SUBMIT Notification Never Received This can be caused by the following e Notification Consumer is not reachable from the server Verify network IP connectivity e No EPR attribute was specified or an incorrect EPR attribute was specified Verify the EPR attribute in the request If it appears correct Verify that a Provisioning Manager ping request with that EPR sends a notification to that URL e Localhost was specified for the EPR IP address This works only if the server and client are on the same platform e A notification consumer is not running For instructions on build a notification consumer see Programmer Guide for the Cisco Unified Provisioning Manager Northbound Interface Rules Wrong Service Areas are assigned Verify the precedence configuration and configure the Service Areas with proper precedence Explicitly add Service Areas to assign to the rule data Setting the DNReservationTimeout or PhoneReservationTimeout rules does not work These two rules do not apply to individual domain
3. e Close all open Telnet connections with the host router device to make the connection available for Provisioning Manager Infrastructure or subscriber synchronization fails with the following message Failed to create a session with CUE module Cisco Unity Express module allows only one connection and Provisioning Manager cannot establish a Telnet session on Cisco Unity Express module Close all the Telnet sessions with the Cisco Unity Express module and try again Domain Synchronization Domain synchronization has been completed successfully but some or all the subscribers have not been created in the domain By default all the rules are disabled so Domain synchronization creates the subscribers if their department code applicable only to Cisco Call Manager matches the name of the Domain Enable the Domain synchronization rules and rerun the synchronization Domain synchronization has been completed successfully but some or all subscribers have not been created in the Domain even though the domain synchronization rules are enabled Those subscribers were not synchronized from the device during the subscriber synchronization Do the following Troubleshooting Guide for Cisco Unified Provisioning Manager a OL 25681 01 Troubleshooting Topics W e If there is a time gap between the subscriber and the Domain synchronization some subscribers were created on the device during that time Rerun the subscriber synchronizat
4. Troubleshooting Guide for Cisco Unified Provisioning Manager This guide describes how to use CLI tools to troubleshoot Provisioning Manager It also provides information on specific problems that you might encounter when installing upgrading or using Provisioning Manager For each problem described possible causes are given followed by actions that you can take to solve the problem This guide includes the following sections e Provisioning Manager Troubleshooting Tools page 1 e Troubleshooting Topics page 6 Provisioning Manager Troubleshooting Tools You can use the following tools to troubleshoot your system e Abort Orders To abort or clear orders created in Provisioning Manager e Change Log Level To temporarily change the Provisioning Manager log level without restarting Provisioning Manager e Show Tech To collect the required troubleshooting information in a single compressed archive file e Line to End User Association Provisioning To collect utility related details amp Note When you use the troubleshooting tools you should use the same Windows user account that was used when Provisioning Manager was installed If you want to schedule synchronization from a different Windows user account the following environment variables must be set e DEV_DIR e EOSS_BASE e JBOSS_HOME e JAVA_HOME e DFC_PROPERTIES 8 l a l i 8 Americas Headquarters Cisco Systems Inc 170 West Tasman Drive San J
5. OL 25681 01 Troubleshooting Topics Hl When upgrading the installer prompts with message The system is not in a safe state to upgrade at this point One of the conditions is not met e No orders are in the Released state e No infrastructure subscriber or Domain synchronizations are running e No batch projects are running or in the Active state Clear the running activities listed in message and then restart the installer When upgrading a prompt with the following message Database connection could not be made Database service may be down so the upgrade cannot be continued The windows service cupmPostgreSQL is not running Do the following e Go to Control Panel gt Administrative Tools gt Services gt cupmPostgreSQL service e Right click on the service name and start it OL 25681 01 Troubleshooting Guide for Cisco Unified Provisioning Manager W Troubleshooting Topics When upgrading DB Server database check fails with the following message Please ensure that the connection information is correct and that the database is accepting connections Please refer installation guide to determine the admin name database name and port Credentials of database admin name password database name and port may be incorrect Refer the following properties in lt CUPM Install Dir gt sep dfc properties on the Application Server machine to determine the credentials and try again e dfc postgres adm
6. 01 Troubleshooting Guide for Cisco Unified Provisioning Manager W Troubleshooting Topics The following error message appears on the configuration page when you provide ABCD as the attribute value Invalid format ABCD This message indicates that the value entered contains one or more characters that are not allowed for that attribute Remove the unsupported characters for that attribute One of the following error messages appears IPT 1700 A device error occurred please verify the NICE log to determine the problem Configuration Failed Cannot insert or update pattern A Route pattern exists with the same pattern and partition Or IPT 0300 Duplicate value not allowed Configuration Failed Cannot insert or update pattern A DN exists with the same pattern and partition These messages are derived from Cisco Unified Communications Manager and they indicate that an attempt was made to configure an entity with a combination of number and route partition that already exists on the device Translation Pattern Route Pattern Hunt Pilot Call Park and Call Pickup Group are the entities that require a combination of pattern and route partition to be set This pattern cannot be repeated on the device Provisioning Manager validates duplicate patterns or route partitions within instances of the same type Make sure that these values are unique The following error message appears Unable to find processor instance Please
7. Area configuration Output is stored in Domain directory AAA server configuration Output is stored in AAA directory Device Configuration Output is stored in MediaServer and CiscoRouter directories Processor Configuration Output is stored in CallProcessor UMProcessor and CUPProcessor directories All service actions and their network dialogs for the specified date range will be exported Output is stored in ServiceAction directory e LOGS collects log files SEP and NICE logs Output is stored in cupm logs directory PostgreSQL logs Output is stored in pgsql logs directory JBoss logs Output is stored in jboss logs directory e ORDER Collects order information Order XMLEntity export of all INITIALIHOLDIRELEASED orders for the specified date range located in Order directory Forall collected orders the corresponding ordering subscribers of the products along with their customer records are also exported as a XMLEntity Output will be stored in the subscriber directory All service actions and their network details for the specified date range will be exported Output will be stored in ServiceAction directory e SA Collects all Service Action data both successful and failed The ALL option collects failed Service Actions e SYSTEM Collects system information Provisioning Manager configuration dfc properties ipt properties system runtime properties and IM counts Output will
8. Cisco 7902 phone Reset the value for the provisioning attribute for unsupported devices at the advance override The specified provisioning attribute was not configured on the device when it was activated The specified provisioning attribute was overridden by the current settings of the attribute at an assignment level with higher precedence Either update the provisioning attribute value at the higher precedence assignment level so that it is applied or override the value while ordering using the advance order override feature Send Caller to Alternate Contact Number Unity behavior On Cisco Unity if you configure different extensions for different keys only the latest extension is used for keys to set Send Caller to Alternate Contact Number The Description field is not supported on Cisco Unity This behavior is expected on Cisco Unity by design across different versions There is no recommended action for this problem Provisioning Manager does not support emailAddress field in ESA of UC 7 0 Cisco Unity Connection 7 0 does not support the calendaring feature There is no resolution for this problem Changing and Canceling Orders Canceling Enable Mobility does not cancel RDP and RDP Line Although all three products are for mobility there is no dependency defined between Enable Mobility and RDP Cancel Enable Mobility and Remote Destination Profile separately A change order for Nokia S60 or iPhone fails in CUCM 8 0 3 with the
9. JMSContainerlnvoker Reconnect failed JMS provider failure detected for InitialServiceActionRequestMDB The password for the Postgres admin postgres and database user cupm contains special characters which cause installation failures Avoid special characters for the Postgres admin and database user password When upgrading the following message appears The system is not in a safe state to upgrade at this point For more details please check the install log file The following conditions must be met before upgrading e No orders are in the Released state e All workflows are in the Finished state e No infrastructure subscriber or domain synchronizations are running e No batch projects are running or in the Active state Check the installLocation install log file for one of the following messages and correct the condition for upgrade to continue e WARNING At least one Domain synchronization is running e WARNING At least one device either subscriber or infrastructure synchronization is running e WARNING At least one batch project is in running or active state e WARNING At least one order is found in released state with extended status not in unrecoverable error OL 25681 01 Troubleshooting Guide for Cisco Unified Provisioning Manager W Troubleshooting Topics When upgrading the following message appears Database connection could not be made Database service may be down so the upgrade cannot be co
10. Manager does not match with the schema of the Call Manager Do the following e Verify the version of the Call Manager with Provisioning Manager supported version e Check the Call Manager for any service engineering or other patche releases Troubleshooting Guide for Cisco Unified Provisioning Manager a OL 25681 01 Troubleshooting Topics Hi Cisco Unified Communications Manager Express Synchronization Infrastructure synchronization or subscriber synchronization fails with the following message Access Denied Please check Username password This can be due to the following e A Telnet or SSH session with the Call Manager Express cannot be created due to an incorrect device protocol or incorrect access password e The Call Manager Express device is setup to use special device prompts Do the following e Check the CallManager Express configuration to see if it is set to use Telnet SSHv1 or SSHv2 Update the protocol selection in Provisioning Manager e Get the correct Telnet passwords for the CallManager Express device and update the device passwords in Provisioning Manager e If your CME device is set up for custom TACACS authentication prompts check the device authentication prompts add the prompts in the lt Install Dir gt sep ipt config ios DevicePromts ini file and restart Provisioning Manager Infrastructure synchronization or subscriber synchronization fails with the following message Access Denied Plea
11. Provisioning Manager machine and the LDAP server and then save again Add the LDAP servers SSL certificate into Provisioning Manager and restart the Provisioning Manager before adding the server details When you enter an AAA server details into Provisioning Manager and click Save the following error message appears Login to the LDAP server failed Please verify the credentials The specified LDAP server credentials Admin DN Admin password or the LDAP User search is incorrect Update the credentials and save When you enter an AAA server details into Provisioning Manager and click Save the following error message appears The specified LDAP server service is unavailable The specified LDAP server is not accepting requests from Provisioning Manager There could be many reasons for this problem such as the server might be too busy to handle the request Wait for some time and try again When you enter an AAA server details into Provisioning Manager and click Save the following error message appears An error occurred while connecting to the LDAP server Provisioning Manager has encountered an unknown exception while connecting to the LDAP server Verify the sep log for more details and fix the error accordingly After successfully adding a AAA server into Provisioning Manager and then assigning it to a Domain a user in that domain cannot login even with correct credentials Provisioning Manager could not send the authenticate call
12. Unified Communications Manager versions The differences are as follows e Cisco Unified Communications Manager 6 x and 7 x The previously configured value is retained e Cisco Unified Communications Manager 8 x Ringer Off is set however for certain phones such as the Nokia S60 and the iPhone the order fails Be sure to enter the correct value for the Do Not Disturb provisioning attribute when creating change orders When provisioning a line to end user association the following error message appears Communication failure Verify your network connectivity Connectivity between Provisioning Manager and Cisco Unified Communications Manager has been interrupted Make sure that network connectivity between Provisioning Manager and Cisco Unified Communications Manager is intact Troubleshooting Guide for Cisco Unified Provisioning Manager OL 25681 01 Troubleshooting Topics Hi Configure a Service Area with a standalone Cisco Unified Communications Manager and Cisco Unity Connection co residing in Cisco Unified Communications Manager Business Edition Place a voicemail order for the user in this Service Area The order is not processed and the following error message appears Invalid configuration Cisco Unity Connection co resident in Cisco Unified Communications Manager Business Edition cannot be combined with a standalone Cisco Unified Communications Manager A Service Area with this combination of Call Processor and Uni
13. account does not have administrative privileges Send an NBI Requests with a Provisioning Manager account with user privileges e No NBI License If you ave a license confirm it is installed correctly e XML Parsing Error Syntax of Request is incorrect Verify the Client Request with validation utility e Server NBI Resources Exceeded Do the following NBI Clients already has 20 active asynchronous requests executing on server Throttle the requests List storage has been exceeded Pull or release existing lists for existing requests or wait for automatic purging OL 25681 01 Troubleshooting Guide for Cisco Unified Provisioning Manager W Troubleshooting Topics API feature does not work The API feature depends on pmadmin account and it is blocked if the user account is blocked Unlock the pmadmin account Object in Request not found This can be caused by the following e Specified device Domain Service Area or subscriber does not exist Do the following Confirm object exists through the user interface or with an NBI get request Confirm object is specified correctly in the XML request file e Specified product does not have the correct keys Verify the following For Change and Delete you must specify the product keys using the keyAttribute array Key Attributes are specified in SDK They can also be returned by listing infrastructure or subscriber products NBI delete request fails
14. and then continue with the order processing in the workflow If not abort the remainder of the order in the workflow Place new orders for the remaining unfulfilled services Unrecoverable Error The problem cannot be addressed inside Provisioning Manager or Call Processor or Unified Message Processor devices and the remaining provisioned orders must be aborted For example Failure in configuring a voicemail Do the following e Verify the order status for unrecoverable errors in the workflow e Verify the nice log and sep log files for possible exceptions e Abort remaining orders in the workflow e Place new orders for the remaining unfulfilled services Change Log Level Step 1 Step 2 Step 3 Step 4 Change Log Level is a CLI tool that temporarily changes the Provisioning Manager log level without restarting Provisioning Manager When you restart Provisioning Manager the log level reverts to the level configured in the dfc properties file This tool changes the log level only for SEP and NICE logs To temporarily change the log level Log into the Provisioning Manager server Open the Windows command prompt Enter the following command to go to the script directory cd C CUPM sep ipt bin Run the following command with the appropriate options to change the log level in the dfc properties file changeloglevel bat level lt loglevel gt APPSERVER NICE BOTH e if APPSERVER NICE or BOTH options are not specifi
15. apostrophe After provisioning an analog phone in Provisioning Manager voice port and dial peer configurations in the voice gateway are not visible The voice gateway is not registered with Cisco Unified Communications Manager Set the required configuration using the Generic IOS Router Pre Built configuration template in the voice gateway While ordering subscriber products in Cisco Unified Communications Manager Express or Cisco Unity Express the following error message appears The selected Service Area has processor CME or Unity Express we cannot order services related to these processor s since this subscriber containing space in the Subscriber ID Cisco Unified Communications Manager Express or Cisco Unity Express does not allow spaces in a subscriber ID Choose a different subscriber ID without spaces or remove the subscriber ID and readd it without spaces OL 25681 01 Troubleshooting Guide for Cisco Unified Provisioning Manager W Troubleshooting Topics The Single Number Reach Service bundle is unavailable for ordering A subscriber can configure Enable Mobility only once in Cisco Unified Communications Manager Verify the customer record to see if the subscriber already has an Enable Mobility service If so cancel the Enable Mobility service and order Single Number Reach or Remote Destination Profile service Cisco Dual Mode for iPhone is not shown in the Phone Type list as an orderable phone Either you hav
16. following error message Object Not Valid When you do a change order for Nokia or iPhone the Mobility User Id attribute value is not set and the device update fails Either provide a valid value for Mobility User Id or upgrade to Cisco Unified Communications Manager version 8 0 3 11002 1 Engineering special build Troubleshooting Guide for Cisco Unified Provisioning Manager P24 g OL 25681 01 Troubleshooting Topics Hi Phone details are removed from Provisioning Manager when the change phone order fails This can be due to the following e The data format is incorrect e The data value is not accepted by Cisco Unified Communications Manager e Some attributes for example Ignore Presentation Indicators must be set to true or false Do the following e Check the NICE log file to identify the problem e Verify the data format and the value in Provisioning Manager Verify the format for complex attributes such as BLF Directed Call Park When keywords are used a Change Owner order does not set the values for newly added provisioning attributes Alerting Name ASCII Alerting Name ASCII Display ASCII Line Text Label and Owner User ID The Change Owner operation does not handle keyword substitution for newly added provisioning attributes After a Change Owner order is executed the new owner must create a Change Phone order and set a value for the new provisioning attributes When you cancel a shared Line voicemail is not
17. it e Check the batch file for common batch file issues e Click the error hyperlink to see more details about the error e Follow the general recommended actions for the recoverable error Some of the batch actions in a batch project failed with Waiting or Error status During provisioning the order failed with an unrecoverable error for example Duplicate MAC Address Do the following e Ifthe batch project has not completed pause it e Check the batch file for common batch file issues e Click the error hyperlink to see more details about the error e Follow the general recommended actions for the unrecoverable error A user cannot access the Batch Provisioning link on the screen The user has not logged in as pmadmin or another role with Administrator rights Do the following e Assign the Administrator role to the user e Have the user log into Provisioning Manager again as an Administrator A batch action for a Change Phone order or for bundles including a Phone product fails with an error When provisioning a Phone product the order fails with an unrecoverable error because the Phone Button template is not specified for the new phone Do the following e Ifthe batch project is not completed pause it e Check the batch file for the Phone Button template Ensure that it is specified in the batch file with a valid value e Follow the general recommended actions for the unrecoverable error OL 25681 01 Tr
18. numbers have been moved to other Call Pickup Groups Only one directory number should be part of a Call Pickup Group The following error message appears Config Template CLI execution failed Incorrect input value The next argument must be the destination directory The format must be lt drive gt lt FolderName gt This can be due to the following e The directory is provided with backward slash lt drive gt lt FolderName gt e The specified directory does not have a folder name lt drive gt Use a forward slash in the path and add a folder name The Configuration Template CLI imports an XML file with the wrong name After exporting a template if the filename is changed and the same file is used to import on another Provisioning Manager the imported template name does not match the filename The template name is stored in the file therefore changes made to the filename have no impact on the template name After importing the file rename the template Exporting or importing the Configuration template seems to export or import only the parent template During the export or import operation if you provide the parent template or filename in the command line as options only those options are exported or imported Use the all option when the command line tool is invoked for export or import operations H323 Gateway configuration may fail for Cisco Unified Communications Manager 4 x The H323 Gateway cannot be configured in Cisc
19. to the LDAP server Do the following Go to the AAA server wizard in Provisioning Manager e Click Test Connection button to verify that the Provisioning Manager can do a successful connection to the LDAP server e If there is an error message fix it accordingly and then try to login OL 25681 01 Troubleshooting Guide for Cisco Unified Provisioning Manager W Troubleshooting Topics After adding an user to the LDAP server configured in Provisioning Manager you cannot login to Provisioning Manager with that user Provisioning Manager does not synchronize users from the LDAP server Provisioning Manager uses the LDAP server only for authentication Create that user in Provisioning Manager and then try to login Users who are not created in Provisioning Manager cannot login After adding a user to the LDAP server and Provisioning Manager you cannot login to Provisioning Manager with that user Provisioning Manager creates login accounts for users only if the rule CreateSelfCareAccounts is enabled while creating that user Delete that user in Provisioning Manager enable the self care account and create it in Provisioning Manager again and then try to login to Provisioning Manager After adding a user to the LDAP server and Provisioning Manager you cannot login to Provisioning Manager with that user with the password specified in the LDAP server The domain in which this user is created is not updated to use this LDAP s
20. 11 e Ordering and Provisioning page 15 e Batch Provisioning page 26 e Subscriber Management page 28 e Move Operations page 29 e Configuration Templates page 30 e Infrastructure Configuration page 31 e AAA Server page 34 e Notifications page 37 e Provisioning Manager NBI page 37 oting Guide for Cisco Unified Provisioning Manager Troublesho OL 25681 01 Troubleshooting Topics W e Rules page 38 Installating Upgrading and Uninstalling After uninstalling Provisioning Manager 8 6 and reinstalling the installer prompts with message The system already has CUPM 8 6 installed Please click lt Finish gt to exit the installer Uninstallation may not have been completed successfully Remove the directory Zero G Registry from C Program Files and try the installation again Installation fails due to msiexec failed with 1603 error or incorrect command line parameters 1639 The Postgres database failed to install Do the following and then run the installation again e Verify that CSA is not running e Verify that the Users group exist on the system e Verify that the Windows service secondary login is running e Run the command msiexec and make sure that version 3 or later is displayed If not verify whether Windows SP1 or SP2 is installed Installation fails with the following exception lt cupminstalllocation gt EnterprisePlatform 4 2 0 GA_CP02 server cupm server log org jboss ejb plugins jms
21. PM_BLANK e The data format is incorrect e The data value was not accepted by Cisco Unified Communications Manager Do the following e Check the NICE log file to identify the problem Troubleshooting Guide for Cisco Unified Provisioning Manager o OL 25681 01 Troubleshooting Topics Hi e Verify the data format and the value in Provisioning Manager e Verify the format of the complex attributes for example BLF Directed Call Park BLF Directed Call Park is not provisioned on Cisco Unified Communications Manager This can be caused by the following e Cisco Unified Communications Manager 6 0 1 does not support BLF Directed Call Park e A partition is preconfigured in Cisco Unified Communications Manager 6 x and 7 x Do the following e Make sure that this attribute is not set for Cisco Unified Communications Manager 6 0 1 e Configure the partition before setting BLF Directed Call Park BLF Directed Call Park Label ASCII is not provisioned on Cisco Unified Communications Manager Cisco Unified Communications Manager 6 x and 7 x do not support this field Do not set it for these versions An order failed with the following error message Failed to addPhoneWithLines due to inappropriate format for BLF Destination The asterisk wildcard is accepted in Cisco Unified Communications Manager 6 1 3 and later Reconfigure the format of the BLF Destination field When you configure a BLF two or more identical directory
22. age Encountered the following error s Speed Dial Info Invalid index format Valid values are 1 99 Provisioning Manager throws an exception if any of the provisioning attribute values are invalid Verify the data format or value of the listed provisioning attributes Some provisioning attributes have complex data types See the batch template for details Troubleshooting Guide for Cisco Unified Provisioning Manager P26 E OL 25681 01 Troubleshooting Topics Hi A batch aborts with the following error message A semicolon delimiter is required to configure multiple DN blocks eg 355 3001 3099 4 357 4001 4099 4 The DN block format is lt Prefix gt lt First Number gt lt Last Number gt lt Minimum Length gt lt Prefix gt lt First Number gt lt Last Number gt lt Minimum Length gt The semicolon delimiter is used to configure multiple directory number blocks If the provided data is not in the specified format Provisioning Manager throws an exception Verify the data format see the batch template files in AddServiceArea txt ChangeServiceArea txt and DeleteServiceArea txt in the following path lt CUPM_INSTALL_DIR gt sep ipt config sample batchProvisioning Some of the batch actions in a batch project failed with Waiting or Error status During provisioning the order failed with a recoverable error for example Duplicate Directory Number Do the following e Ifthe batch project has not completed pause
23. be stored in the cupm directory Troubleshooting Guide for Cisco Unified Provisioning Manager OL 25681 01 Step 1 Step 2 Step 3 Step 4 amp Provisioning Manager Troubleshooting Tools W All PostgreSQL configuration files are copied Output will be stored in the pgsql directory All license files Output will be stored in the License directory Installed patch data and install log Output will be stored in the Patch directory To collect required Provisioning Manager troubleshooting information in a single compressed archive file Log into the Provisioning Manager server Open the Windows command prompt Enter the following command to go to the script directory cd C CUPM sep ipt bin Run the following command with appropriate options showtech bat start lt START_DATE gt end lt END_DATE gt options e lt START_DATE gt Enter the date in YY YY MM DD HH MM format e lt END_DATE gt Enter the date in YYYY MM DD HH MM format Note The start and end dates must be specified to limit the range of data to be collected By default if no options are specified all components are collected and the output zip file is stored in the OS Windows temp directory During data collection if 100 MB of free disk space is not available the tool will abort To collect the most recent sep log and nice 01 log file the END_DATE must be later than the current date because the tool uses the time of the last fi
24. col Do the following e Check the NICE log to find out which attribute is causing the failure e Clear the setting of that attribute when ordering An order completed but Set Only provisioning attributes have not been configured properly This can be caused by the following e The data format is incorrect e The data value was not accepted by Cisco Unified Communications Manager e Some attributes for example Ignore Presentation Indicators have not been set Do the following e Check the NICE log file to identify the problem e Verify the data format and the value in the Provisioning Manager e Verify the format of the complex attributes for example BLF Directed Call Park e Submit a change order An Add order failed This can be caused by the following e The data format for set only provisioning attributes is incorrect e The data value was not accepted by the Cisco Unified Communications Manager e Some attributes for example Ignore Presentation Indicators have not been set Do the following e Check the NICE log file to identify the problem e Verify the data format and the value in the Provisioning Manager e Verify the format of the complex attributes for example BLF Directed Call Park e Resubmit the order An order failed because of the use of CUPM_BLANK settings This can be caused by the following e Mandatory attributes Presence Group Device Mobility Mode SIP Profile DND Option are set to CU
25. cords Updating the MAC address of a voice gateway also updates the associated phones MAC addresses However if you do not perform a Domain synchronization subscriber records are not updated Always perform a Domain synchronization after you change the MAC address of a gateway reference When SIP trunk provisioning is complete the value for the attribute Destination Address is an SRV is not shown on the screen The value for the SIP trunk attribute Destination Address is an SRV cannot be retrieved CSCtf72467 is a known defect and there is no workaround An analog phone is not shown on the Phone Type list as an orderable phone Provisioning Manager by default cannot manage analog phones To do so you must set the following property to Y in ipt properties file dfc ipt cisco callmanager analog_phone_support Y amp Note You must restart Provisioning Manager after you update the ipt properties file To order analog phones you must add voice gateway references to the Service Area from the Service Area screen Otherwise analog phone types will not be shown as orderable After provisioning the product Enable Presence Enable Client Service is not shown in the list of orderable products Either the Presence Server has not been added to the system or the product is not associated to any subscriber role Do the following e Verify that a Presence Server has been added and is properly configured e Run both infrast
26. d services or pending orders and cannot be converted from or to Pseudo Role The users have services in their customer records Do the following e Cancel the services or change the owner of the services e Change the subscriber role While changing the subscriber role of a user from normal to pseudo the following error message appears Subscriber xxx has an associated user account in the Call Processor and cannot be converted to Pseudo Role The user has an associated user account in the device Do the following e Delete the user account in the device e Runa subscriber synchronization in Provisioning Manager e Change the subscriber role Whenever a new subscriber account is created and the Create Self Care Account rule is enabled an error about the password not complying to security policy settings appears The password complexity policy in the properties file has been updated Therefore any rule based passwords set prior to the update do not meet the new password complexity policy Update rule based passwords in all Domains Move Operations When you try to move a subscriber from one Domain to another the following message appears Cannot perform the requested operation Domain synchronization is running Provisioning Manager does not allow subscriber or service movement while the following operations are running e Infrastructure or subscriber synchronization e Domain synchronization e LDAP synchronization e Domain Serv
27. discard the local configuration This message appears if locally modified version of an instance has been deleted from Cisco Unified Communications Manager A subsequent infrastructure synchronization will flag the local instance as an orphan and display this message when you load it The only operation you can perform is to delete the local copy The following error message appears Processor configuration may have been modified after the locally modified changes This may happen because of an infrastructure synchronization or another session modifying this instance This message appears if there is a locally modified version of an instance that is directly modified on the processor while the infrastructure synchronization is running The changes were made to the instance after saving it locally You can discard the latest changes or ignore the warning All operations are allowed in this state The following error message appears The initiating task execution has failed The current task would not be executed An infrastructure configuration task in the Queued state will not be executed because the initiating task failed Provide another date or triggering task for the task initiation The following error message appears IPT 0500 Object Not Valid Configuration Failed Item not valid The specified route partition was not found An instance with a reference to an uncommitted instance has been pushed to the device Make sure that only com
28. e name of the object An error occurs with the following message IPT 0500 Object Not Valid Configuration Failed Item not valid The specified Austin RP was not found For the object being provisioned one or more of the selections do not exist on that device In this case a Call Search Space has been created but Austin RP does not exist on that device Either select an object that exists on the device or select the appropriate device to generate the configuration Infrastructure Configuration The following error message appears while deleting an instance of the Infrastructure product IPT 0600 Software This instance is being referred by other instances and cannot be deleted Please verify the associated products This message indicates that you are trying to delete the instance by clicking either Mark for Deletion or Delete from Processor which is being referred by other entities and hence cannot be deleted Click the Associated Products link to view the corresponding instances While adding a new instance the following message appears IPT 0600 Software Duplicate value s found A configured instance already exists for Calling Search Space with the value s Name test This message indicates that you have provided duplicate values for the key attributes of an infrastructure entity The name and value of the key attribute are provided in the error message Change the settings that are repeated OL 25681
29. e 24 Cannot view new phone types orderable after upgrading to Provisioning Manager 8 6 Although new phone types are supported you must manually assign them to existing subscriber types for an upgraded system Do the following to associate a new phone type to a subscriber type e Click Advanced Setup gt Subscriber Roles e Select the role of the subscriber e Click Associate Products e Select the phones that you wish to order for the user Phone orders fail during change or replace operation with the following error A device error occurred please check NICE log to determine the problem DND Option value should only be Call Reject An unsupported value is given for the DND Option provisioning attribute Certain phones such as the Cisco Dual Mode for Android Cisco Dual Mode for iPhone and Nokia S60 support only one DND Option mode for example Call Reject whereas other phones support three different modes Select the appropriate values from the list of available values based on the phone model OL 25681 01 Troubleshooting Guide for Cisco Unified Provisioning Manager W Troubleshooting Topics The Cius phone attribute Video Calling is not supported in Provisioning Manager The Cius attribute Video Calling found in Cisco Unified Communications Manager is shown as Video Capabilities in Provisioning Manager Use the Video Capabilities attribute The MAC address of the analog phone is not updated in subscriber re
30. e Configuration Template The template was generated against a device or Service Area that does not support the template item Before a template is generated the UI displays Supported or Unsupported beside the template item This can be due to the following e Unsupported template items are not created in the batch file Do the following e Select a different device or Service Area and generate the template again The object was created on Cisco Unified Communications Manager but the keyword was not substituted for example name Site_VoiceRegion This can be due to the following e Curly brackets are missing around the keyword for example Site _VoiceRegion e The keyword list does not contain the keyword or value Do the following e Make sure that all keywords are surrounded by curly brackets You can use to substitute keywords but this does not work if the keyword is concatenated to another word as in the example above It is recommended that you always use curly brackets e Make sure that the selected keyword list contains valid keywords and values e Check the generated batch project to ensure that the keywords are converted before scheduling An error occurs with the following message IPT 0300 Duplicate value not allowed Configuration Failed Could not insert new row duplicate value in a UNIQUE INDEX column The object being provisioned already exists on Cisco Unified Communications Manager Change th
31. e product catalog for the subscribers with that Subscriber Role Cisco and the Cisco Logo are trademarks of Cisco Systems Inc and or its affiliates in the U S and other countries A listing of Cisco s trademarks can be found at www cisco com go trademarks Third party trademarks mentioned are the property of their respective owners The use of the word partner does not imply a partnership relationship between Cisco and any other company 1005R Any Internet Protocol IP addresses and phone numbers used in this document are not intended to be actual addresses and phone numbers Any examples command display output network topology diagrams and other figures included in the document are shown for illustrative purposes only Any use of actual IP addresses or phone numbers in illustrative content is unintentional and coincidental 2011 Cisco Systems Inc All rights reserved Troubleshooting Guide for Cisco Unified Provisioning Manager 40 E OL 25681 01
32. e selected a subscriber role other than Senior Manager or Executive or the selected Service Area does not have the SIP protocol Configure the Service Area with the SIP protocol and associate the product to the subscriber role An Enable Mobility order results in an unrecoverable error with the following message This device does not qualify as a Mobility Primary device When ordering Enable Mobility you cannot choose a primary user device that does not consume two or more device license units Select another device as the primary user device A newly ordered iPhone cannot be found The device name has been reformatted to uppercase and has the prefix TCT When performing a search or placing an order change or cancellation use the reformatted device name An order fails for an incorrect Do Not Disturb provisioning attribute and the following message appears DND Option value should be Ringer Off While adding or modifying an order the order will fail if you choose an unsupported value for the Do Not Disturb provisioning attribute Select the correct value for the Do Not Disturb provisioning attribute based on the phone type Different behavior occurs for the Do Not Disturb option provisioning attribute when it is unset during a change order for a phone with EM Access When you perform a change order for a phone with EM access and you uncheck the value for the DND provisioning attribute the attribute behaves differently for different Cisco
33. e users services are added to their subscriber records Troubleshooting Guide for Cisco Unified Provisioning Manager ss OL 25681 01 Troubleshooting Topics W After successfully running an LDAP synchronization user details updated in LDAP are not getting updated in Provisioning Manager In Provisioning Manager the field Update Existing User Details would have been set as Do not update So Provisioning Manager will not update any existing users details Change the field value to All fields so that the user details are updated during the synchronization After successfully running an LDAP synchronization user IDs deleted from the LDAP server are not deleted from Provisioning Manager In Provisioning Manager the field Delete Users is set as Do not delete or Delete if user has no services When you set the value as Do not delete Provisioning Manager will not delete any users and if the value is Delete if user has no services Provisioning Manager will delete only if the user has no services in Provisioning Manager Change the field value to Always delete so that the users get deleted during the synchronization When you enter an AAA server details into Provisioning Manager and click Save the following error message appears The specified LDAP server is unreachable If UseSSL flag is checked it indicates that the SSL certificate is not added into Provisioning Manager key store Ensure that there is a network connectivity between
34. ed the default option sorTH is used OL 25681 01 Troubleshooting Guide for Cisco Unified Provisioning Manager W Provisioning Manager Troubleshooting Tools Show Tech e lt loglevei gt can be DETAIL LOW NORMAL HIGH or EMERGENCY ShowTech is a CLI tool that collects required troubleshooting information in a single compressed archive file This tool is available in Provisioning Manager 2 0 and later versions and is not backward compatible with Provisioning Manager 1 x versions To execute ShowTech you must specify a date range Optionally you can specify a target directory for the zip file output otherwise the default OS temp directory is used While collecting the troubleshooting data and before writing to the output directory the tool checks that a minimum of 100 MB of free disk space is available on the target drive During data collection if 100 MB of free disk space is not available the tool will abort with an appropriate message and clean up the drive thereby preventing the risk of consuming too much disk space It is recommended that you refine the date range options to limit the data to be collected and rerun the tool You can categorize the troubleshooting data by component you can explicitly collect any component by specifying a command line option By default all component data is collected You can collect following component data e DEPLOYMENT Collects deployment information Domain and Service
35. er oL 25681 01 EEN W Troubleshooting Topics Cisco Unity Express Synchronization Infrastructure or subscriber synchronization fails with the following message Access Denied Please check Username or password This can be due to the following e A telnet or SSH session with the host router or Cisco Unity Express module cannot be created due to an incorrect device protocol or incorrect access password e The host router device is setup to use special device prompts Do the following 1 Check host router configuration and check if it is set to use Telnet SSHv1 or SSHv2 Update the protocol selection in Provisioning Manager 2 Get the correct Telnet passwords for the host router device and Cisco Unity Express module and update the device passwords in Provisioning Manager 3 If your Cisco Unity Express host router device is setup for custom TACACS authentication prompts check the device authentication prompts and add the prompts in the configuration file in lt nstall Dir gt sep ipt config ios DevicePromts ini file and restart the Provisioning Manager Infrastructure or subscriber synchronization fails with the following error Access Denied Please check Username or password The Provisioning Manager server cannot make a Telnet connection to the host router device Do the following e Check the line vty configuration on the host router and make sure it is configured to handle at least five or more telnet connections
36. errors which are present in the Execution Trace of the Service Action Fault Response java net ConnectException Connection timed out connect Do the following e Verify the Unified Message Processor Configuration wizard that the correct IP Address is defined e Verify the device network connectivity Product Catalog Troubleshooting Unable to see a specific product during Service order This can be caused by the following e Product or product bundle is not properly associated with the Subscriber Role e No Service Area with the product supporting Call Processor or Unified Message Processors type is setup for the Subscriber Role Do the following OL 25681 01 Troubleshooting Guide for Cisco Unified Provisioning Manager E Troubleshooting Topics e Verify if the selected product is one of the eligible products for the subscriber s role If not select the product in Subscriber Role Configuration gt Associate Product screen for the subscriber role Phone Type Line Type e Verify if there is a Service Area for that Subscriber s role with the product supporting Call Processor or Unified Message Processor type that allows the product to show up in product catalog For instance if the subscriber role is Employee and if there is no Service Area with a Unified Message Processor for Employee Role configured in the system then Voicemail Email UnifiedMessaging or bundles including these products will not show up in th
37. erver Assign this LDAP server to the user s domain and then try to login again with that user You enter a AAA server details into Provisioning Manager and when you click Save they do not get saved showing this error message Cannot connect to the specified ACS server Provisioning Manager cannot see the specified ACS server Make sure that there is network connectivity between Provisioning Manager machine and the ACS server and then save again After successfully adding a AAA server into Provisioning Manager and then assigning it to a domain a user or subscriber in that domain cannot login even with correct credentials Provisioning Manager did not get the proper response to the authenticate call sent to the ACS server Do the following e Verify that the Provisioning Manager server is added to the ACS server as a AAA client with TACACS protocol If it is not added please add it e While adding the ACS server in Provisioning Manager if data encryption is set to true with a shared secret key make sure that the same shared secret key is specified in the ACS server as well After adding a user or subscriber to the ACS server configured in Provisioning Manager you cannot login to Provisioning Manager with that user or subscriber Provisioning Manager does not synchronize users or subscribers from the ACS server Provisioning Manager uses the ACS server only for authentication Create that user or subscriber in Provisioning Manage
38. fied Message Processor is not supported However there is no validation in Provisioning Manager to restrict this combination when you create a Service Area Make sure that you do not configure a combination of standalone Cisco Unified Communications Manager and Cisco Unity Connection co resident in Cisco Unified Communications Manager Business Edition An order with an unsupported expansion module fails While ordering a phone if you choose an unsupported expansion module for the phone type the order will fail Choose a supported expansion module for the selected phone type Cannot see Cisco Client Services Framework in the drop down list of phone types Cisco Unified Communications Manager versions earlier than 6 1 4 do not support the Client Services Framework feature When you configure a Service Area using SCCP protocol configure the Service Area using SIP protocol While ordering a service for a Pseudo user the following error message appears There is no product available to order Please verify the Domain Service Area User Type and the user s configuration The Pseudo subscriber role is not assigned to any Service Area within a user Domain Select a Service Area assign the Pseudo subscriber role and then order a service Cannot find phones in the Pseudo user s customer record This can be caused by the following e You have not run a Domain synchronization after exporting the phones and executing the batch e The Domain synch
39. firstname lastname voicemail display name In Cisco Unity Express the values for first name last name and voicemail display name must contain only letters of the alphabet Do the following e Select a Service Area that has a Cisco Unity or Cisco Unity Connection e Change the subscriber s first name last name and voicemail display name as needed on the Manage Subscriber wizard Add Phone or Add Phone Service on Cisco Unified Communications Manager Express fails with the following error message Addition of Phone AAC2719075AA failed IPT 1372 Cli command invalid error There may be an error in running one or more cli commands in the device Either Provisioning Manager cannot add the required phone configuration or it is trying to use a phone slot that is in the Unregistered state Do the following e Verify that the Telephony Service feature is enabled on the device e Verify that the total number of phones configured has exceeded the maximum number of ephones configured on Cisco Unified Communications Manager Express e Verify the ephone slot number used by Cisco Unified Communications Manager Express on the device if the phone connected to the slot is not being used unhook the phone Rerun the subscriber and Domain synchronization and place the order again OL 25681 01 Troubleshooting Guide for Cisco Unified Provisioning Manager W Troubleshooting Topics Add Phone Service or Add Line on Call Manager Expre
40. g Manager W Troubleshooting Topics After executing Unlock through PM the voicemail account is still locked By default the account lockout duration is time based You must configure the account lockout duration as Forever or Administrator Must Unlock on Cisco Unity or Cisco Unity Connection respectively If you provision a Call Pickup Group on Cisco Unified Communications Manager version 6 0 or later and it fails the following error message appears IPT 1700 Configuration Failed Verify constraint informix cc_pickupgroup_pickupnotificationtimer failed Call Pickup Group notification timer is a mandatory field in Cisco Unified Communications Manager 6 0 and later Update the template to specify a value for Call Pickup Group notification timer and then reprovision While ordering Extension Mobility Access Extension Mobility Access with line and phone service with Extension Mobility enabled the order may fail Provisioning of Extension Mobility related subscriber products is not possible in Cisco Unified Communications Manager 4 3 2 For this version users with Extension Mobility enabled cannot be synchronized from the device This issue was resolved in Cisco Unified Communications Manager version 4 3 2 52 Upgrading to the latest Cisco Unified Communications Manager image will resolve the issue Value of ASCII Line Text Label provisioning attribute set while ordering the Phone Service for Cisco Unified Communications Ma
41. ge appears Installing Install Postgres 9 0 Virus scanner might be running Do the following e Cancel the installation or upgrade e Disable the virus scanner e Open the Task Manager select cupm8 6 setup exe and avaw and then click End Processes e Clean up the failed installation e Restart the installation or upgrade After restoring Provisioning Manager 8 6 cannot view or create new batch projects Restoration of the database is incomplete You must execute the restore operation steps described in the User Guide for Cisco Unified Provisioning Manager 8 6 Uninstalling fails and the following exception appears in the install log Product Exception error code 601 message err additional data Unable to delete c CUPM sep Service Exception error code 30020 message The directory is not empty 145 severity 0 While uninstalling Provisioning Manager some files under lt cupm install location gt sep are still referenced Manually delete all files and folders manually that are specific to Provisioning Manager After uninstalling Provisioning Manager and reinstalling the installer prompts with a message The system already has Provisioning Manager installed Please click lt Finish gt to exit the installer Uninstallation is not complete Manually delete the Zero G Registry directory from C Program Files and try the installation again oting Guide for Cisco Unified Provisioning Manager Troublesho
42. gt p lt password gt where lt username gt is a Provisioning Manager user who has administrator level access and lt password gt is the password for that user The utility searches for Lines that do not have end user associations The total number of Line instances requiring end user associations appears To proceed enter Y After completion the utility reports the total number of successfully provisioned end user associations and any failed transactions All transactions are logged in the lt Installation directory gt sep logs associateLineToEnduser log file Utility dumps SOAP information on the CLI SOAP output is enabled in the ipt properties file Do the following to disable the SOAP output in the ipt properties file dfc ipt axl soap output request enabled N dfc ipt axl soap output response enabled N Utility takes more time to complete This is due to the following e Network Latency between Provisioning Manager and Cisco Unified Communications Manager e Many Line instances are missing in the end user association The utility prompts for a confirmation with the total number of Lines identified for provisioning You can skip running the utility and run it later Troubleshooting Topics The following topics provide troubleshooting steps for errors encountered while working with Provisioning Manager e Installating Upgrading and Uninstalling page 7 e Device Management page 10 e Synchronization Scheduling page
43. have admin privileges e lt password gt Password associated with the pmadmin userid e Errors Aborts all the orders that are in Recoverable or Unrecoverable error state e RecoverableErrors Aborts all the orders that are in Recoverable state e UnrecoverableErrors Aborts all the orders that are in Unrecoverable state e lt order_id gt Aborts the order with the specified ID only if the order is in the Error state e lt order_id gt forced Forces the order with the specified ID to abort The order can be in any state This option can be used to abort stuck orders Note Run help to view tool usage Troubleshooting Guide for Cisco Unified Provisioning Manager OL 25681 01 Provisioning Manager Troubleshooting Tools W Recoverable Error You can address this problem in Provisioning Manager Call Processor or Unified Message Processor devices and then continue with the order provisioning process Examples of recoverable errors include e Stale or inactive directory numbers on Cisco Unified Communications Manager e Errors in communication with the device Do the following e Verify the order status for recoverable errors in the workflow e Verify the nice log and sep log files for possible exceptions e Verify if the problem can be resolved in Provisioning Manager Call Processor or Unified Message Processor by removing inactive directory number from the Call Processor If yes fix the problem
44. he subscriber order entry page Voice gateway references have not been added to that Service Area so analog phones are not orderable for the subscriber type Add voice gateway references to the Service Area Also when you upgrade the Provisioning Manager system you must associate analog phones to subscriber types Adding or replacing a phone fails with the following error IPT 0300 Duplicate value not allowed Could not insert new row duplicate value in a UNIQUE INDEX column The selected voice port is already in use Provisioning Manager and Cisco Unified Communications Manager have not been synchronized Perform subscriber synchronization of Cisco Unified Communications Manager While ordering subscriber products in Cisco Unity Express the following error message appears The selected Service Area has processor Unity Express we cannot order services related to these processors since this subscriber containing apostrophe in the Subscriber Id Cisco Unity Express does not allow apostrophes in a subscriber ID Choose a different subscriber ID without an apostrophe or remove the subscriber ID and readd it without apostrophes While ordering the Remote Destination Profile for a subscriber whose ID contains an apostrophe the following error message appears Apostrophe is not allowed in the Remote Destination Profile name Cisco Unified Communications Manager does not allow apostrophes in Remote Destination Profile names Remove the
45. iber details on a Call Processor are not removed until they are removed from Provisioning Manager Delete the subscriber in Provisioning Manager OL 25681 01 Troubleshooting Guide for Cisco Unified Provisioning Manager W Troubleshooting Topics A Cancel Line order failed with the following message Error encountered while removing a line java lang IlegalStateException This instance has been removed When performing a Change Phone order on the Phone with which the Line is associated cancel the order Once the Phone order is placed cancel the Line order again A Shared Phone is still available on the Call Processor after it has been canceled from one subscriber Provisioning Manager does not delete a Shared Phone on the Call Processor until it is canceled from the associated subscriber Cancel the Shared Phone from all the associated subscribers record Canceling a Shared Phone for a subscriber does not disassociate the phone in Cisco Unified Communications Manager In Cisco Unified Communications Manager a canceled Shared Phone remains associated with the subscriber s account only if the subscriber has a single Phone Remove the Phone from the subscriber s associated device list When you place a Change Owner order changes are not reflected on the Unified Messaging Processor If you do not change the email ID email display name voicemail alias or voicemail display name the services on the Unified Message Proces
46. ice Area or processor deletion Wait until the specified operation is complete and then try the move operation again When you try to move a subscriber from one Domain to another or try to move services from one Service Area to another the following message appears Cannot perform move operation Subscriber or subscriber services are being moved Provisioning Manager does not allow subscriber or service movement while the following are happening e Subscriber movement is already in progress from one Domain to another e A subscriber services move is in progress in the same Domain Wait until the specified operation is complete and then try the move operation again When you try to move a subscriber from one Domain to another the following message appears Cannot perform the move operation No applicable Service Areas are available for some of the subscriber services Provisioning Manager does not allow the subscriber movement when one or more of the following are not present in the new Domain OL 25681 01 Troubleshooting Guide for Cisco Unified Provisioning Manager W Troubleshooting Topics e Relevant processor of the subscriber service e Service Area that matches the subscriber services protocol Verify whether the target Domain has all the required Service Area configurations and then try the move operation again A Move Subscriber Batch action fails with the following error message Cannot find a matched batch
47. in user Postgres admin user name e dfc postgres database Database name e dfc postgres port Port number of database server Device Management The following message appears while removing a capability from the device The selected capability cannot be removed since it has been configured This message indicates that you are trying to remove the capabilities of a device that has been already configured without deleting the associated Call Processor or Unified Messaging Processor instance from the system Delete the associated Call Processor or Unified Messaging Processor first and then remove the device capability Voice gateway references in the Service Area does not show gateways You have not performed infrastructure synchronization on Cisco Unified Communications Manager The voice gateway slot and subunit are not configured Do the following e Perform infrastructure synchronization of Cisco Unified Communications Manager e From the Infrastructure Configuration screen specify a value for the voice gateway slot and subunit Voice Gateway References field under the Call Processor settings in the Service Area screen are not shown to the user Either you have selected a Service Area of type SIP or the version of the Call Processor associated with the Service Area is earlier than 6 x To provision analog phones you have to create a Service Area of type SCCP and the associated Call Processor version should be 6 x or later The fo
48. ion before running the Domain synchronization e An error would have occurred during the subscriber synchronization Domain synchronization completed successfully but some users don t see their products in the customer record The user s products did not match a Service Area in this domain and so were not added to the customer records Check the detail log to see whether the product was added or not Create or update the appropriate Service Area and re run the domain synchronization The detail log of the domain synchronization can be seen in the Synchronize Domain page Customer records still reference products that were affected by a Service Area or Call Processor deletion A Service Area or Call Processor deletion was performed and affected subscriber records have been moved out of synchronization You must execute a Domain synchronization after you perform delete operations to clean up and reassign the products accordingly While executing a Call Processor synchronization License Exceeded Exception error occurs For every one minute License Audit will happen in the backend During the Audit if the maximum count has exceeded then the subscriber synchronization fails and you cannot perform any phone related operations Get the incremental license and place it in the License directory Ordering and Provisioning Placing Orders This section contains the following topics e Placing Orders page 15 e Changing and Canceling Orders pag
49. ions configured but no notification received Emails are not sent out by Provisioning Manager for events such as synchronization failures or order failures even though these are enabled The most likely cause for this issue is incorrect email server settings provided Navigate to the Notification configuration UI and click the test connectivity button In the popup that shows up provide a valid email address and click the Send button Ensure that a test email from Provisioning Manager is successfully received Test Connectivity Fails and the following error messages appear Cannot send test email using the notification settings or Failed to connect The notification settings provided for mail host port username or password are incorrect Provide the correct settings and complete the test connectivity step Provisioning Manager NBI Client Request Times Out This can be caused by the following e Server is unreachable from the client Verify network IP connectivity e Server is Down or Unavailable Confirm that a user can log in to the UI e Client Soap header has incorrect URL Confirm that the NBI Requests being sent to the correct IP Address Port and namespace The default port is 80 If in use 1024 may be used Client Rejects Request with Exception This can be caused by the following e Credentials are wrong Verify the Soap Header verify whether the correct Provisioning Manager user ID and password is set e The user
50. isioning Manager e Run subscriber synchronization in Provisioning Manager During infrastructure and subscriber synchronization of Cisco Unified Communications Manager 4 3 2 you may get the following error message Error Communication failure Unexpected end of file received from server This may be a Cisco Unified Communications Manager issue We will collect the log files to analyze about this issue Non restricted domain synchronization does not seem to take effect This can be due to the following e The Non RestrictedDomainSync rule is disabled e Rule data is not populated in correct data and format Do the following e Enable the rule Non RestrictedDomainSync e Make sure that the rule data is populated with the correct data and format e View the detailed domain synchronization logs for details Cisco Unified Communications Manager Synchronization Infrastructure sync failed with the following message Communication error This can be due to one of the following e Incorrect entry of IP Address e Incorrect entry of password Update the device password or IP address Infrastructure synchronization failed with the following message in the nice 01 log 2007 02 13 14 34 50 762 SOAP response unmarshalling failed ERROR Failed to send SOAP message IPT 0600 Software Failed to unmarshall SOAP response Cause javax xml bind UnmarshalException Unexpected element authorizationCodeRequired The AXL Schema Provisioning
51. le update e Options include outputDir Output directory to which to write data defaults to the OS temp directory if not specified component lt COMPONENT gt Component data to collect ALL DEPLOYMENT LOGS ORDER SYSTEM Defaults to ALL if not specified ignoreErrors Ignores any internal errors encountered while collecting data Line to End User Association Provisioning Step 1 Step 2 When upgrading Provisioning Manager for presence and mobility features to work correctly you must run the Line to End User Association utility The utility provisions the missing end user associations for the Line products that were previously provisioned in Provisioning Manager 2 1 If this utility is not executed the presence status for any Lines other than the primary extensions will not be reported for Cisco Unified Personal Communicator and the Single Number Reach Service product will not work correctly The amount of time it takes for the utility to complete depends on the number of Lines to be provisioned To run this utility you must have administrator level access On the Provisioning Manager system open a command prompt At the command prompt enter lt Install directory gt sep build bin OL 25681 01 Troubleshooting Guide for Cisco Unified Provisioning Manager E Troubleshooting Topics Step 3 Step 4 From the command line run the following command ProvisionLineUsers bat u lt username
52. llowing message appears when I add more than one capability in the Add or Update Device screen The selected combination of capabilities is not allowed You are trying to add more than one capability to the device and the comibination is not supported When you add more than one capability to a device you can add only the following supported combinations e MCS Server Unified CallManager and Cisco Unity Connection e Cisco Router Unified CallManager Express Cisco Unity Express and Generic IOS Router The following message appears when configure a capability in the Add or Update Device screen Save the changes to this page before configuring capabilities You are trying to configure a capability without saving the changes made to the device You must save the changes made to the Add or Update Device screen and then move to the Capability Configuration screen Troubleshooting Guide for Cisco Unified Provisioning Manager o OL 25681 01 Troubleshooting Topics Hl What if the primary Unity Connection fails over to the secondary one Unity Connection synchronization and Order fails and the primary Unity Connection is not reachable Unity Connection works as an active pair When the primary one fails the secondary one can takes over Do the following e Go to Infrastructure Dashboard gt Set Up Devices gt Devices e Choose the Unity Connection that fails e Change the IP address to the IP address for the secondary Unit
53. mitted instances are pushed to the device More infrastructure products than expected are displayed in a particular processor This is an ICR feature If you have different profiles in different Domains and if the underlying Domains contain the same processor the permissions on that processor are an aggregation of all of the permission profiles Verify your permission profiles in all Domains Troubleshooting Guide for Cisco Unified Provisioning Manager OL 25681 01 Troubleshooting Topics Hi The Call Pickup Group view is missing the Directory Numbers information The API or batch aborts with the following error message Specified DirectoryNumber RoutePartition s does not exist in the system or is not associated to subscriber This can be due to the following e The subscriber synchronization failed to run e The directory number does not exist in this Call Processor e The directory number exists but it is not associated with a subscriber Run subscriber synchronization to bring all the directory number information into the Call Pickup Group Call Pickup Group provisioning is too slow Multiple provisioning requests are being sent to Cisco Unified Communications Manager for each directory number in the Call Pickup Group Divide the Directory Numbers into multiple parts and then update the Call Pickup Group part by part Some existing directory numbers are missing from the Call Pickup Group The corresponding directory
54. moveSubscriber setting for the service Product Phone Label SEP123456789123 ServiceArea CurrentSA Provisioning Manager cannot find the move settings that can be applied to a service This problem is due to mismatched Old Service Area New Service Area and Apply New Settings Set appropriate Old Service Area New Service Area and Apply New Settings values for the service specified in the error message See lt CUPM_INSTALL_DIR gt sep ipt config sample batchProvisioning MoveSubscriber txt for more details A Move Service Batch action fails with the following error message Cannot find a matched service object to move Provisioning Manager cannot identify the service based on the specified key attributes Verify the key attributes settings in the batch data file and get the key attributes definitions from lt CUPM_INSTALL_DIR gt sep ipt config sample batchProvisioning MoveService txt The server rejects a client request with following error message Cannot perform move operation Subscriber or subscriber services are being moved When a move operation is in progress no further orders are allowed until the operation completes Retry after the move operation has completed The server rejects a client Move Subscriber request with the following error message This subscriber has some services Please add product details to the request data file The subscriber cannot be moved without giving service details in the request data A fe
55. n the Provisioning Manager The Domain synchronization creates subscribers only if their department codes matches the name of the Domain by default Make sure that the subscribers department codes match the Domain name or change the behavior by modifying the following rules e AssociateAllUsersInCallProcessor e AssociateAllUsersInUMProcessor Cannot create a subscriber in a particular Domain No Domain selection is available on the subscriber screen You can create a subscriber with an ordering role only in your Domain Only Administrators can create subscribers in other Domains Do the following e Log into Provisioning Manager as an Administrator and create a subscriber for the Domain e Log into Provisioning Manager as a user who has permissions for ordering a role for the Domain e Add a subscriber When you create a subscriber in Provisioning Manager with subscriber ID in uppercase letters or a combination of uppercase and lowercase orders for voicemail email or UMS fail Cisco Unity Connection 7 0 does not support case insensitive entries in the subscriber table If you use Cisco Unity Connection 7 0 as your Unified Messaging Processor subscriber IDs must be in lowercase only Troubleshooting Guide for Cisco Unified Provisioning Manager e E OL 25681 01 Troubleshooting Topics Hi While changing the subscriber role of a user from pseudo to normal the following error message appears Subscriber xxx has associate
56. nager 7 0 1 does not set the value in the device The ASCII Line Text Label PA value cannot be set in Cisco Unified Communications Manager 7 0 1 The following error message appears while ordering There is no Service Area available for Auto Assigned Line Please go back and make alternative selections There is no Directory Number Block configured for the selected Service Area Do the following e Select the auto assigned line e Update at least one Service Area e Provide a Directory Number Block and try to place the order again No product s are available while placing a new order The following message appears The subscriber roles configured on subscriber wizard and in all the Service Areas in the subscriber s domain do not have any common subscriber role configured Service Areas in the subscriber s domain are not assigned a subscriber role At least one subscriber role must be assigned for a Service Area Cannot enable Extension Mobility when ordering a Phone The subscriber s Domain does not have a Call Processor that has Extension Mobility details Do the following e Update at least one Call Processor within the Domain along with the Extension Mobility Details e Place the order again Cannot see Unified Messaging products while ordering This can be due to the following e The products are not orderable with this subscriber s role oting Guide for Cisco Unified Provisioning Manager Troublesho OL 25681 01
57. ng a granular synchronization the following error message is displayed ERROR Invalid Syntax ccm813 all sync txt 3 The syntax of the granular synchronization configuration file is incorrect Verify the syntax of the configuration file The problem is identified in the error message See the User Guide for Cisco Unified Provisioning Manager for the syntax of the configuration file Samples files are also provided in lt CUPM_INSTALL_DIR gt sep ipt config sample syncTool I OL 25681 01 Troubleshooting Guide for Cisco Unified Provisioning Manager W Troubleshooting Topics While executing a granular synchronization you get an error message ERROR Invalid Object Class CallManager sync txt 1 The syntax of the granular synchronization configuration file is incorrect Verify the syntax of the configuration file The problem is identified in the error message The synchronization target type Object Class CallManager is incorrect Valid types are CallProcessor UnifiedMessageProcessor CUPProcessor and IPTDomain After running a subscriber synchronization the following message appears in Detailed Synchronization log A pseudo user with id XXX exists in CUPM system Please either delete the pseudo user on CUPM or delete the user from CCM Both pseudo user and a general user in the device have the same User ID Do the following e Delete the user account of the general user in the device or delete the pseudo user in Prov
58. ntinued The windows service cupmPostgreSQL is not running Do the following e Go to Control Panel gt Administrative Tools gt Services gt cupmPostgreSQL e Select the service right click on it and click Start When upgrading the database server database check fails with the following message Please ensure that the connection information is correct and that the database is accepting connections Please refer installation guide to determine the admin name database name and port Credentials for the database admin name password database name and port may be incorrect See the dfc properties file to determine the credentials and try again Use the following properties to determine the credentials e dfc postgres admin user Postgres admin user name e dfc postgres database Database name e dfc postgres port Port number of the database server The file is located in the application server at lt CUPM Install Dir gt sep dfc properties After upgrading the Provisioning Manager values for certain attributes such as Trunk service type do not appear in the UI This occurs after the user has upgraded Provisioning Manager and infrastructure synchronization has not been done In this case the SIP trunk instance that existed before the upgrade does not show the values for Trunk service type attribute Do the infrastructure synchronization after the upgrade During installation or upgrade the panel hangs and the following messa
59. numbers appear in the drop down list Cisco Unified Communications Manager configures one of those directory numbers This can be caused by the following e The directory numbers belong to different partitions e Partitions are not supported due to the Cisco Unified Communications Manager AXL limitation Log in to Cisco Unified Communications Manager and verify that the correct directory number and route partition have been configured Busy Lampfield Label ASCII is not provisioned in Cisco Unified Communications Manager 7 0 1 The AXL 6 1 2 schema is used for Cisco Unified Communications Manager 7 0 1 therefore the Busy Lampfield Label ASCII attribute is not supported Do not use Label ASCII for this particular version When adding or changing a line the transaction fails with the following error A device error occurred please verify the NICE log to determine the problem Sum of device s line appearance values for maxNumCalls exceed device limitation This can be caused by the following e The Max Calls value is out of range e The Busy Trigger value is greater than the Max Calls value Do the following e Configure new Max Calls and Busy Trigger values for the line and make sure that the values do not exceed the maximum accepted by Cisco Unified Communications Manager e Make sure that the Busy Trigger value is less than or equal to the Max Calls value OL 25681 01 Troubleshooting Guide for Cisco Unified Provisionin
60. o Unified Communications Manager 4 1 3 4 2 1 4 2 3 and 4 3 2 without the AAR Group name although this attribute is not mandatory in later versions of Cisco Unified Communications Manager or in Provisioning Manager The problem has been resolved for Cisco Unified Communications Manager version 4 2 3 with ES 58 Specify the AAR group name when you provision the H323 Gateway for all Cisco Unified Communications Manager 4 x versions OL 25681 01 Troubleshooting Guide for Cisco Unified Provisioning Manager W Troubleshooting Topics AAA Server When you run an LDAP synchronization it fails with the message Synchronization failed Provisioning Manager was not able to reach the LDAP server Do the following e Go to the AAA server wizard e Select an appropriate LDAP server and click the Test Connection button e Verify whether Provisioning Manager can do a successful connection to the LDAP server e If you get an error message select an LDAP server and then run the synchronization again After running an LDAP synchronization no users were imported to Provisioning Manager The Synchronization report shows that the number of users received from the LDAP server is 0 This can be due to the following e Provisioning Manager could not find any users in the LDAP server with the synchronization options e Provisioning Manager uses the MaxPageSize as 250 by default If the LDAP server setting for that variable is less than 250 Provi
61. ose CA 95134 1706 USA W Provisioning Manager Troubleshooting Tools Abort Orders gt Caution Step 1 Step 2 Step 3 Step 4 amp You can copy the values for these properties from the user account that was used when Provisioning Manager was installed Abort Orders is a CLI tool that you can use to abort or clear orders created in Provisioning Manager For orders in Recoverable Error or Unrecoverable Error state which can be aborted from the GUI this tool provides the options to remove one or all of these orders The orders are then properly aborted This tool can also be used to force orders that are hanging and cannot be cleared from the GUI to abort for example when the status changes to HOLD The tool attempts to initiate an orderly abort with proper rollback however this cannot be guaranteed as it depends on the state of the order Do not use this tool if you do not have a good understanding of failed orders because aborting a running order can result in data integrity issues To abort orders Log into the Provisioning Manager server Open the Windows command prompt Enter the following command to go to the script directory cd C CUPM sep build bin Run the following command with the appropriate options AbortOrders lt userid gt lt password gt Errors RecoverableErrors UnrecoverableErrors lt order_id gt forced e lt userid gt Enter pmadmin as the userid The userid should
62. oubleshooting Guide for Cisco Unified Provisioning Manager W Troubleshooting Topics A batch order for addUser or deleteUser fails The batch order aborts when there are only addUser or deleteUser actions in a batch file and the number of entries exceeds 1000 Delete the entries from the batch file Subscriber Management A subscriber was added using Provisioning Manager but subscriber details are not available on Cisco Unified Communications Manager Provisioning Manager does not create a subscriber on the device until a service is provisioned for that subscriber Order a service for the subscriber While you delete a subscriber the following error message appears This Subscriber still has active orders and cannot be deleted Subscribers with services or active orders cannot be removed from Provisioning Manager Do the following e Cancel all services for the subscriber e Ensure that there are no active orders for the subscriber e Try removing the subscriber again A Call Processor or Unified Messaging Processor subscriber synchronization was executed successfully but no subscribers were found in Provisioning Manager Subscribers are not created until a Domain synchronization is performed Make sure that the Call Processor or Unified Message Processor is added to the Domain and then perform a Domain synchronization A Domain synchronization was executed successfully but some or all subscribers are not available i
63. r and then try to login Users or subscribers that are not created in Provisioning Manager cannot login to Provisioning Manager After adding a user or subscriber to the ACS server and Provisioning Manager you cannot login to Provisioning Manager with that user Provisioning Manager creates login accounts for users or subscribers only if the rule CreateSelfCareAccounts is enabled while creating that user Delete that user or subscriber in Provisioning Manager enable the self care accounts rule create it again and then login to Provisioning Manager After adding a user or subscriber to the ACS server and Provisioning Manager you cannot login to Provisioning Manager with that user or subscriber with the password specified in the ACS server The domain in which this user or subscriber is created is not updated to use this ACS server Assign this ACS server to the user or subscriber s domain and then try to login again with that user or subscriber Troubleshooting Guide for Cisco Unified Provisioning Manager P36 E OL 25681 01 Notifications Troubleshooting Topics Hi From value specified as part of notification set up is not used in the notifications Emails from Provisioning Manager do not use the from address configured Some SMTP servers like smtp gmail com ignore the from address specified by the client and instead use the user account s email ID as the from address There is no recommended action for this issue Notificat
64. removed from the device In Provisioning Manager voicemail is associated with a Line that shares the same directory number This is an expected behavior supported from Provisioning Manager 8 5 Cannot modify an extension attribute of a Cisco Unity Connection distribution list in Provisioning Manager There is no Cisco Unity Connection interface support for Provisioning Manager to modify an extension attribute from a configured value to a blank value A few attributes of the phone on the Cisco Unified Communications Manager are lost after placing a Change Phone order When you perform a Change Phone order any attributes that are not supported by Provisioning Manager but exist on the phone will either be reset to their default values or dropped from the phone on the Cisco Unified Communications Manager Log into the Cisco Unified Communications Manager Admin page to manually reset those attributes A few subscribed phone services are lost from Cisco Unified Communications Manager after placing a Change Phone Order When you perform a Change Phone order services that are configured for the Domain are retained All the other phone related services are dropped Do the following e Configure the services for the Domain e Log into the Cisco Unified Communications Manager Admin page to manually subscribe to those services A subscriber is still available on the Call Processor even after all products or services have been canceled Subscr
65. ronization rule is not set up properly Do the following e Make sure that the domain synchronization rule is set properly for the orphan phones e Runa Domain synchronization While ordering a phone for a Pseudo user the following error message appears The User Account already exists in Call Processor User ID lt user_id gt Both the Pseudo user and a user in the device have the same user ID Do the following e Delete the user account in the device or delete the Pseudo user e Order a Phone Cannot find an existing phone in the Copy Phone selector This can be caused by the following e The Call Processor is not the same as the phone to be copied e The phone protocol is not the same as the phone to be copied e The user creating the order does not have privileges for the Domain in which the phone resides Do the following OL 25681 01 Troubleshooting Guide for Cisco Unified Provisioning Manager W Troubleshooting Topics e Select a Service Area that has the desired Call Processor e Select a phone protocol that is the same as the phone to be copied e Make sure that the logged in user has privileges for the Domain in which the phone resides When ordering a Phone the following error message appears Operation failed because of the following error A device error occurred please verify NICE log to determine the problem The setting of each attribute might be applicable to a specific phone type or phone proto
66. ructure and subscriber synchronizations e Verify that the chosen Service Area is associated with the Presence Server e Verify that the product is associated with at least one subscriber role Presence Server is not shown in the list of orderable products Either the Presence Server has not been added to the system or the product is not associated to any subscriber role Do the following e Verify that a Presence Server has been added and is properly configured e Run both infrastructure and subscriber synchronizations e Verify that the chosen Service Area is associated with the Presence Server e Verify that the product is associated with at least one subscriber role Troubleshooting Guide for Cisco Unified Provisioning Manager OL 25681 01 Troubleshooting Topics Hi Enable CUPC License is not shown in the list of orderable products Enable CUPC License is divided into two products e Enable Presence Enable UPS License e Enable Presence Client Enable UPC License Select new products accordingly Analog phones have been removed from Cisco Unified Communications Manager but are still shown in Provisioning Manager subscriber records Deleting voice gateways from Provisioning Manager will in turn delete all associated analog phones However you must perform a Domain synchronization or analog phones in the subscriber records will not be removed Analog Phone Type is not shown in the Phone Type drop down list on t
67. s but the global domain Modify the rules in the Customer Domain Template Troubleshooting Guide for Cisco Unified Provisioning Manager e E OL 25681 01 Troubleshooting Topics Hi Data Maintenance System Issue Purging completed successfully but in the specified backup location there are no exported data files Data is only exported before purging if the configuration export is turned on Verify the Data Maintenance page and confirm the Export Before Purge configuration is set to Yes System runs out of disk space This can be caused by the following e The log was generated too quickly e Purge is disabled Adjust the values in the ipt properties file accordingly If a user account is lock user login will fail and The account is locked Please contact the system administrator error message appears Once the user account is locked he cannot login through web browser even with the correct password Unlock user account from the Locked User page System runs out of disk space Other application maybe using too much disk space Identify the source outside Provisioning Manager and make adjustments Need to set log to DETAIL but could not find the log files for troubleshooting Some logs maybe removed early Verify the properties turning on Compress will allow the system to save more data Communication Failure Please verify your network connectivity Unable to collect data from the device because of network
68. se check Username or password The Provisioning Manager server cannot make a Telnet connection to the CallManager Express device with the correct passwords Do the following e Check the line vty configuration on the CallManager Express and make sure it is configured to handle at least five or more Telnet connections e Close all open Telnet connections to the CallManager Express device to make the connection available for Provisioning Manager In Provisioning Manager subscriber record the users first name and last name appears as Unknown after domain synchronization For Call Manager Express devices phones added outside of Provisioning Manager are not configured with users first and last name in the ephone configuration When a phone is configured directly on a Call Manager Express device without using Provisioning Manager you must add the username configuration with the users first name and last name and rerun the subscriber and domain synchronization Cisco Unity and Cisco Unity Connection Synchronization The following message appears Access Denied Please check username or password Data from the device cannot be collected due to the user authentication error Do the following e Check whether the correct user name and password are defined in Unified Message Processor Configuration wizard e Check whether the device s SQL Server supports SQL Authentication Troubleshooting Guide for Cisco Unified Provisioning Manag
69. sioning Manager will not be able to synchronize any users Do the following e Ensure that the correct LDAP server is specified in the LDAP synchronization wizard e Adda property dfc ipt ldap pagesize in the C CUPM sep ipt properties file with the value set on the LDAP server For example dfc ipt ldap pagesize 200 After successfully running an LDAP synchronization new users added in LDAP were not synchronized with Provisioning Manager Provisioning Manager could not find the new users in the LDAP server with the synchronization options Ensure that the correct LDAP search is specified in the LDAP synchronization wizard If you have specified either a simple or an advanced query ensure that the new users created in LDAP match these criterion After synchronizing an user from an LDAP server you cannot login to Provisioning Manager with that user ID Provisioning Manager creates login accounts for users only if the CreateSelfCareAccounts rule is enabled Do the following e Delete the user ID from Provisioning Manager e Enable the CreateSelfCareAccounts rule e Run the LDAP synchronization to generate the user ID e Login to Provisioning Manager with the new user ID After successfully running an LDAP synchronization the newly created users in Provisioning Manager do not have services in their subscriber records LDAP synchronization creates the user ID only Run the domain synchronization after the LDAP synchronization so that th
70. sor retain the old user details Change the email ID email display name voicemail alias or voicemail display name when you place the Change Owner order Batch Provisioning A batch aborts with the following error message The target 0 cannot be found with key attribute s 1 0 infrastructure product name 1 product key Attributes with values Provide a valid infrastructure product instance object during a change or delete operation Few infrastructure products have more key attributes When changing or deleting you must provide all of the key attribute values A batch aborts with the following error message RequiredProductAttributeMissingExceptions An error occurred because a mandatory attribute was not specified Use the sample batch file to validate the attributes and ensure that you enter the same name defined in the sample file Additionally ensure that columns are separated by tabs A batch aborts with the following error message AttributeExceptions Some infrastructure products have attributes of type Complex Complex attributes require special data formatting to configure The Route List infrastructure product has one complex attribute called Route List Member Info for example SampleRG On 512 512 Trailing 512 512 SampleRG1 On 8945 8945 Trailing 8945 8945 Each child attribute is separated by a colon delimiter Each row is separated by a semicolon delimiter A batch aborts with the following error mess
71. ss service action fails with the following error message Addition of Phone AAC2719075AA failed IPT 1372 Cli command invalid error There may be an error in running one or more cli commands in the device Adding a Line to a Phone on Cisco Unified Communications Manager Express fails because you must add the required Line configuration in Provisioning Manager However Provisioning Manager cannot add a Line to the ephone dn which has MWI On or MWI Off configured Do the following e Verify whether the max dn has reached the maximum limit If so increase the limit of max dn by configuring max dn lt number gt under telephony service mode e Remove the MWI configurations on the ephone dn and try to add the Line again The following error message appears Specified provisioning attribute was not configured on the device when it was activated and the attribute settings at an assignment level with higher precedence or at the order was not overridden The provisioning attribute is not supported by the processor Check the User Guide for Cisco Unified Provisioning Manager for provisioning attributes and their supported processor types Cisco Communications Manager device activation fails with Unrecoverable Error and the nice 01 log shows the following nondescriptive AXL error message This element may be misspelled or out of order Not all device types support all provisioning attributes For example Idle Timeout is not applicable on a
72. w services are available for that subscriber Add the available services in the request data for subscriber movement Configuration Templates Even after importing a Prebuilt IOS Template you cannot select it from Provisioning Manager Ensure that the two files with the naming convention lt NAME gt sweonfig txt and Config UserGuide lt NAME gt txt have been copied into a subdirectory under the directory lt CUPM_INSTALL_DIR gt sep ipt ios pre built You need not restart Provisioning Manager When you select a Prebuilt IOS Template you get an error message telling you that the file is too large and has exceeded 15 000 characters Provisioning Manager uses synchronous transmission that times out after 15 minutes Only 15 000 characters are allowed You must split the files into smaller files Keyword values are not assigned correctly You have assigned keyword list values but you are not seeing the correct values on the screen If a global list is assigned the keyword values in that list override the values in the local list unless the values are empty When global lists are created from the local lists for an item the first value found for any keyword that appears in multiple items is set in the master list Verify the keyword configuration Troubleshooting Guide for Cisco Unified Provisioning Manager P30 E OL 25681 01 Troubleshooting Topics Hl A generated batch project does not contain a template item that is found in th
73. y Connection What value should be used for the Voicemail Switch ID Cisco Unity can be integrated with multiple Cisco Unified Communications Managers Voicemail Switch ID is an attribute supported in Cisco Unity to indicate that voicemail is integrated with Cisco Unified Communications Manager Provisioning Manager accepts any integer value However if the value is invalid a default Cisco Unified Communications Manager is selected automatically To find out the valid values go to the Cisco Unity Registry under HKEY_LOCAL_MACHINE SOFTWARE Active Voice MIU 1 0 Initialization Integrations The value IntegrationID value should be filled in for the Switch ID The following message appears Communication Failure Please check your network connectivity Data from the device cannot be collected due to one of the following e Wrong IP Address e Wrong Port number e Device is not reachable Do the following e Check the Unified Message Processor Configuration wizard to make sure that the correct IP Address and port number are defined e Check the device network connectivity Synchronization Scheduling This section contains the following topics e Cisco Unified Communications Manager Synchronization page 12 e Cisco Unified Communications Manager Express Synchronization page 13 e Cisco Unity and Cisco Unity Connection Synchronization page 13 e Cisco Unity Express Synchronization page 14 e Domain Synchronization page 14 While executi

Download Pdf Manuals

image

Related Search

Related Contents

  Notice - Castorama  Philips FC5126/81 vacuum cleaner  Designers Fountain HC0644 Installation Guide  Emerson Type 1190 Low-Pressure Gas Blanketing Regulator Drawings & Schematics  Rival Slow Cookers User's Manual  Bedienungsanleitung Instruction manual Mode d  Sony STR-DB798 User's Manual  Instruction Manual  User`s Manual  

Copyright © All rights reserved.
DMCA: DMCA_mwitty#outlook.com.