c8.IdoShape - User Manual - 0.1.23
Contents
1. tt ain a 00 bow 4 2D map CROSS SECTIONS Indentation mm Cross sections 8D plot Pu o zu D W b M us iss 18 50 54 Clicking and dragging on the 3D plot will rotate the 3D image while scrolling will zoom and unzoom The buttons below these subwindows have changed into the following set Ee Disconnect close the current connection with the idoshape Start open the datastream from the sensormat Record save the datastream to the hard drive will open a file dialog gt HH Calibrate will recalibrate the sensormat use only when the sensormat is perfecly flat only available when the datastream is not active 5 9 c8 IdoShape v0 1 23 Aug 20 2014 A datastream can be captured by pressing the Record button This will open a file dialog to indicate the name of the file and the folder to save the datastream The record can be ended by pressing the Stop recording button that replaced the Record button I Stop recording Stop streaming the data to the file J 6 9 c8 IdoShape v0 1 23 Aug 20 2014 OPEN A DATAFILE When there is no active connection to a sensormat the software can also be used to open a previously recorded datafile Clicking on the Open existing datafile button will open a file dialog to indicate the file to be examined After the measurement has been loaded into the software2. again three subwindows will populate the main screen with the same features as if it was a live measurement Additionally a set of player buttons has become available to run through the recorded datafile fast backwards stop play fast forward Pressing the fast backwards or fast forward buttons several times will cycle through x2 x4 x8 and x16 speed option in each direction B gt b Before opening another datafile or before performing a new measurement the current datafile must be closed again by pressing the C ose datafile button Close close the current datafile 7 9 c8 IdoShape v0 1 23 Aug 20 2014 J ANALYSE THE MEASUREMENT Once a datastream or a previously recorded datafile is opened several tools become available to examine the measurement These tools can be accessed through a case sensitive right click menu on each of the subwindows 1 Show current value A first feature that can be used to examine the datastream is the Show current value or Show point value option in the right click menu In the case of the 2D map this will toggle the appearance of a set of 3 values next to the current mouse position indicating the x y and z values at that point In the case of the Cross section window it will toggle a set of 2 values whenever the mouse is in the neighbourhood of a cross section indicating the distance on the cross section from the first point and the current z value along the c
3. EaSUESM ENE seeden x 8 1 Show Notarii eR 8 2 Adding cross sections to the 2D TIY Ee eese ois rinon es o Envia tn eto na ERI o ERE yERRR ERR MER eK tI4 E hor ex ERR RUM QE Sa RES 8 2 Adding a group to Thi 2D MAP sous scsdupad n udid e kaussua cca tux ndum aa A at dpa ANKE ERIS 9 4 s sogar afi c 9 J 3 9 c8 IdoShape v0 1 23 Aug 20 2014 THE MAIN SCREEN When the software is started it will open the main screen from which a connection can be made to an Idoshape sensormat or a previously recorded datafile can be opened v 0 0 1 Connect Open Units Play control amp aw y mm D inches 18 51 19 P Connect Idoshape open a file dialog to choose the configuration file Co corresponding to the connected idoshape p Open existing datafile open a file dialog to load a previously recorded file 4 9 c8 IdoShape v0 1 23 Aug 20 2014 PERFORM A MEASUREMENT To perform a measurement first a connection has to be made with the sensormat This is achieved by pressing the Connect button on the lower left corner of the main screen It will open a file dialog to indicate the configuration file for the connected sensormat After a succesful connection the screen is populated with 4 new subwindows on which the 2D map a 3D map the cross sections and the history information will be plotted The subwindows can be resized to presonal preference
4. Qs torna Custom8 NV Ba Romeinsestraat 18 3001 Heverlee Belgi 32 0 16 409055 tel 32 0 16 400019 fax www custom8 com web BE0474773230 vat BE94 4312 7045 0114 iban KREDBEBB bic User Manual c8 IdoShape CoPYRIGHT Copyright Custom8 nv No part of this publication may be reproduced stored in a retrieval system or transmitted in any form or by any means electronic mechanical photocopying recording or otherwise without the prior written permission of Custom8 NV No patent liability is assumed with respect to the use of the information contained herein Neither is any liability assumed for damages resulting from the use of the information contained herein Feedback Requests for information or usage of these or parts of these instructions can be addressed to Custom8 nv Romeinsestraat 18 B 3001 Heverlee info custom8 com Date of publication Aug 20 2014 Software version V 0 1 23 Corrections suggestions may always be addressed to info custom8 com Your help is greatly appreciated 2 9 c8 IdoShape v0 1 23 Aug 20 2014 Table of Contents EOD MIG d C M M 2 Feedback M 2 Date of publication RR o ooo ai 2 SoftWare ri C HO 2 THE Main SCR TEE mm 4 Perform eI AS Nee ER EE ene nine deinende OT 5 Open a datafil TONO TETTE S EIN 7 Analyse the mM
5. n be compared with another deflection A frozen cross section cannot be modified or deleted afterwards 3 Adding a group to the 2D map Similar to the Cross Sections Groups can be added using Add New option in the right click menu on the 2D map The user must then drag a window on the 2D map to cover the region of interest During this dragging action the top left coordinates and the window size are indicated The corresponding results are shown in the History subwindow A group can be modified by right clicking on the 2D map and by choosing the Edit option When the user enters a specific group the group can be moved or resized It can also be removed by pressing the Delete key with the mouse over the specific cross section 4 Exporting data The History information can be exported to a comma separated file using the right click menu in the History window This file will contain a header with the current threshold settings and group definitions and subsequently an overview of the frame number current time and main characteristics of each group and the entire mat for each frame 9 9 c8 IdoShape v0 1 23 Aug 20 2014 J
6. ross section In the case of the History window it will toggle a set of 2 values whenever the mouse is in the neighbourhood of a major line of the history average or minimal value for each group or for the entire mat indicating the frame number and the corresponding line value 2 Adding cross sections to the 2D map cross sections can be added using the right click menu on the 2D map c amp doShape v 0 0 1 poc 4 CressSecions gt AddNew Edit Show Grid Copy Selected Show Current Value Indent ation CROSS SECTIONS Indentation mm UNIT A u o 9 mm inches 4 E gt 18 50 01 18 50 13 18 50 54 When Add New is chosen he user must indicate 2 points on the 2D map to define the plane of the cross section These 2 points also define the start en end point of the cross section itself The actual cross section at that time or time frame will be shown in the cross section window A cross section can be modified by right clicking on a cross section line and by choosing the Edit option The can be removed by pressing the delete key with the mouse over the specific cross section A cross section can by copied by using the Copy selected option This will freeze the current cross section and will add a second cross section with the same parameters This way a certain 8 9 c8 IdoShape v0 1 23 Aug 20 2014 deflection ca
Download Pdf Manuals
Related Search