DS Lighting System controller HD iOS application user guide 1.0
Contents
1. 4 3 If all other troubleshooting options fail lf all other troubleshooting options fail to restore application normal operation follow these instructions 1 Switch off DS LED Lighting System PSU with Wi Fi module 2 Turn iPad off Press and hold the Sleep Wake button for a few seconds until the red SOLS slider appears then drag the slider Switch on DS LED Lighting System PSU with Wi Fi module Turn iPad on Press and hold the Sleep Wake button until the Apple logo appears Go to iPad Wi Fi settings and connect with DS LED Lighting System WiFi network Launch DS Lighting iPad application 22. 2 3 Launch iPad app After connecting to DS LED Lighting System Wi Fi network launch DS LED Lighting System controller app by clicking DS Lighting app icon At the app upper right corner you can see the PSU s connection state There are three states 1 Wi Fi to PSU error red app is connected to DS LED Lighting System Wi Fi module but there is no connection to PSU 2 Reconnecting yellow app is trying to connect to Wi Fi module 12 3 Connected green app made connection with PSU over the Wi Fi module You can start using the app If connection state does not change to connected after a few seconds see troubleshooting section 4 1 4 If connection state changes from Connected to something else then wait for few seconds If connection state does not change to Connected see troubleshooting section 4 1 4 13 3 Using app controls 3 1 Definitions In lighting system light is described two ways 1 White light is described by color temperature tint and intensity 2 Colored light is described by RGBW components RGBW means red green blue and white 3 2 Channel buttons Channel button lets user choose one channel to manipulate with light control knobs Default channel is channel one You can group lightheads into six channels 3 6 One lighthead can be simultaneously only in one channel 3 2 Preset buttons To save current light settings under button 1 hold down preset button 1 until saving
3. that iPad can connect to DS LED Lighting System Wi Fi module s 20 Slave discovery mode default setting is off DS LED Lighting System Wi Fi module is used in master mode If all DS LED Lighting System Wi Fi modules are in slave mode then iPad slave discovery mode has to be turned on to discover all DS LED Lighting System Wi Fi modules connected to same third party router Discovery process can take up to 60 seconds Discovered modules appear on Status tab If after 60 seconds there is nothing on Status tab look troubleshooting section 3 7 2 Save Scene Save Scene Save all color and channel data Preferences light setup 3 Sales Contacts 05 11 2013 light setup 2 Version 05 11 2013 light setup 1 Save Scene enables saving and loading all color and channel data It means that all channel assignments and all colors for all available channels are saved and can be loaded when needed NB This data is deleted when this app is deleted from device To save all color and channel data use button Save all color and channel data It opens pop up and asks user to enter name for saved data By default name beginning is filled with current date but it can be deleted by doing select all and then cut Name must be at least one character otherwise data cannot be saved After data is successfully saved it appears under save button Last save is displayed first 21 To load saved data tap saved data button example tap on bu
4. 2 3 4 5 First column PSUs shows PSU unique serial number Above serial numbers is Wi Fi module SSID DS LIGHT 1 Lightheads column displays each PSU lighthead Picture first row PSU A000009 has three lightheads connected First one is in channel 1 second in channel 6 and third in channel 1 C column displays each lighthead operating temperature RPM column displays each lighthead cooling fan speed Uptime displays switched on time for each lighthead in hours View is refreshed after 10 seconds or sooner if lightheads are connected or disconnected If you see that one PSU is missing from status screen wait 15 seconds and if it does not appear look troubleshooting section 4 2 1 19 3 7 Info tab Info tab displays additional information and settings 3 7 1 Wi Fi settings Wi Fi settings Save Scene SLAVE discovery mode OFF Preferences Sales Contacts Version PSUs Wi Fi module can be used in two modes 1 Wi Fi module in master mode Master mode means that DS LED Lighting System Wi Fi module works as router and iPad can connect directly to DS LED Lighting System Wi Fi network from available networks 2 Wi Fi module in slave mode Slave mode means that DS LED Lighting System Wi Fi module works as Wi Fi client In this mode DS LED Lighting System Wi Fi module connects to third party router and cannot be directly accessed from iPad iPad has to connect to the same third party router first and after
5. same third party router Restart iPad app Restart DS LED Lighting System PSU with Wi Fi module s Restart third party router Check third party router settings and use router tools to display and check network connections Requires access to third party router 4 2 Status tab problems 4 2 1 PSU is missing from status tab If PSU is missing from status screen 1 Z 3 Check that all PSUs are switched on Check that all PSUs are connected together with bolt connection Check that there is only one master PSU in one stack In PSU stack top PSU is master Master status is indicated with green led and all other PSUs in the stack are slaves and their status is indicated with amber led PSU status led is located at the front face and blinks if there is communication between PSUs There can be only one master PSU with green status led in one PSU stack If there are more than one master then there is bad connection between PSUs Check that there is no foreign objects or debris that interfere with PSU to PSU connections Make sure that all bolt connections are fastened correctly If all PSU status leds indicate correct statuses then change light from DS Lighting application This change should trigger status led blinking on all PSUs If there are status leds that do not blink then they mark non responsive PSUs Check non responsive PSUs connections and switch them off and then on again If they remain non responsive remove them from stack
6. 1 is used to identify Wi Fi module It is shown on PSU screen and in iPad app Next user has to choose third party router Wi Fi network from available networks Select row NETWORK and press OK All available Wi Fi networks are displayed on the screen To refresh network list push down on rotary button Refresh can take few seconds Use up and down keys to select third party network DS LightR and press OK to select this Wi Fi network Next step is to enter Wi Fi network password Password minimum length is 8 characters Use rotary button to insert characters by rotating Push down on rotary knob to delete selected character Use left and right buttons to select another character When password 12345678 length is at least 8 characters OK is displayed on the screen Move down on the last row and press OK to save and activate new Wi Fi settings 1 3 5 Wi Fi errors when Wi Fi module is in SLAVE mode Error CAN T JOIN indicates problem with Wi Fi network selection Network DS LightR is not available To fix that error go to setup and change the network Use refresh button to refresh Wi Fi networks list 10 Error WRONG PASS indicates that Wi Fi network DS LightR has different password than user entered To fix that error go to setup and change the password Use rotary knob to change and delete characters Use right knob to move right to check if there are some hidden characters that did not fit on th
7. 3 Lighthead port 2 Error FAN SLOW When lighthead has error s error information is displayed Lighthead background turn to dark red one lighthead in channel 6 with dark red background If user selects Ignore lighthead background stays dark red To access error message again user must tap on lighthead with dark red background Same logic applies to PSU errors If PSU has error s error information is displayed and unique serial number field background turns to dark red If user selects Clear error is cleared If user selects Ignore error is ignored and user can continue without dealing with errors 25 4 Troubleshooting 4 1 Wi Fi connection problems 4 1 1 Error message ERWO01 When Wi Fi connection error ERW001 Wi Fi is turned off Turn Wi Fi on and try again is displayed go to iPad Wi Fi settings and turn Wi Fi connection on 4 1 2 Error message ERW002 When Wi Fi connection error ERW002 Please check that you are connected to DS LED Lighting System Wi Fi and try again is displayed go to iPad Wi Fi settings and connect to DS LED Lighting System Wi Fi module This error is displayed when iPad is connected to another Wi Fi network and application cannot connect to DS LED Lighting System Wi Fi module 4 1 3 Error message ERW003 When Wi Fi connection error ERWO003 Wi Fi connection lost Check if DS LED Lighting system Wi Fi is on is displayed check DS LED Lighting System PSU with Wi Fi m
8. DS Lighting System controller HD iOS application user guide 1 0 Contents 1 Introduction 1 1 Requirements 1 1 1 App requirements 1 1 2 Lighting hardware requirements 1 2 App description 1 3 DS LED Lighting System hardware description 1 3 1 Wi Fi module and possible connection modes 1 3 2 PSU lighthead ports numbering 1 3 3 Wi Fi module configuration as MASTER 1 3 4 Wi Fi module configuration as SLAVE 1 3 5 Wi Fi errors when Wi Fi module is in SLAVE mode 1 3 6 PSU app connection indicator when Wi Fi module in MASTER mode 2 Connecting iPad to DS LED Lighting System 2 1 Download DS Lighting System controller HD app from App Store 2 2 Choosing DS LED Lighting System Wi Fi network 2 3 Launch iPad app 3 Using app controls 3 1 Definitions 3 2 Channel buttons 3 2 Preset buttons 3 3 White view tab 3 4 RGBW view tab 3 5 RGB wheel view tab 3 6 Status view tab 3 7 Info tab 3 7 1 Wi Fi settings 3 7 2 Save Scene 3 7 3 Preferences 3 7 4 Sales Contacts 3 7 5 Version 3 7 6 User Guide 3 8 Error management 4 Troubleshooting 4 1 Wi Fi connection problems 4 1 1 Error message ERW001 4 1 2 Error message ERW002 4 1 3 Error message ERW003 4 1 4 Connection state does not change to connected 4 1 4 Wi Fi slave discovery mode does not discover Wi Fi modules and PSUs 4 2 Status tab problems 4 2 1 PSU is missing from status tab 4 3 If all other troubleshooting options fail 1 Introduction 1 1 Requirements 1 1 1 App requirements e iPad wit
9. ER In default setting Wi Fi is in MASTER mode note text MASTER on the screen It means that Wi Fi module is working as a router DS Light is SSID To change MASTER mode settings or switch to SLAVE mode use up and down keys to select row SETUP and press OK button MASTER mode settings are displayed First row MASTER has arrows pointing left and right It means that there are other options available Here user can change between MASTER and SLAVE mode To change SSID use up and down keys to select row NAME Use rotary button to change letters by turning the button Push down on rotary button to delete selected character Select CHANNEL row to change Wi Fi channel if needed Use left and right buttons to change the value To save MASTER or SLAVE settings and return to previous menu use up and down keys to move to the bottom row as shown on picture and press OK Now settings are saved and Wi Fi module starts with configured settings 1 3 4 Wi Fi module configuration as SLAVE To configure Wi Fi module as SLAVE user needs to know third party router SSID and password if used because in SLAVE mode Wi Fi module works as a Wi Fi client that connects to third party router Enter setup mode as described above and use left and right buttons to change first row from MASTER to SLAVE Use up and down keys to move to different rows and rotary button to change rotate or delete push down values Row NAME value PSU
10. Scene save name date format mm dd yyyy Two channel assignment options Channel assignment by enables user to select how channel assignment is done when channel assignment data is loaded 1 Lightheads when channel assignment data is loaded then channel is assigned by lighthead id In this mode it does not matter where lighthead is connected it always gets its channel assignment 2 Ports when channel assignment data is loaded then channel is assigned by PSU lighthead ports In this mode PSU is identified and channels are assigned to lightheads by PSU lighthead ports where each lighthead is connected 23 3 7 4 Sales Contacts Sales contacts information 3 7 5 Version Selection displays application version This version number enables to identify application version for troubleshooting or technical support 3 7 6 User Guide Selection displays user guides that are available from inside the app User guide opens on the top of the app Select done to return to app 24 3 8 Error management When PSU sends error data to iPad popup window with error description is displayed Popup window has information to help user locate the problem SSID value identifies the stack where error appeared PSU ID identifies PSU location in the stack Top PSU ID is 1 and one below it has ID 2 etc Lighthead port identifies PSU port where lighthead is connected Error displays error message s LIGHTHEAD ERROR SSID DS Light 1 PSU ID
11. e PSU screen 1 3 6 PSU app connection indicator when Wi Fi module in MASTER mode PSU display shows Wi Fi module SSID Service set identifier SSID is a human readable string and thus commonly called the network name By default SSID is DS Light To connect iPad to network DS Light user must choose this network in the iPad General Settings menu When app successfully connects to PSU antenna sign 1 is displayed on PSU screen This means that iPad application is connected to PSU and can control all connected lightheads 11 2 Connecting iPad to DS LED Lighting System 2 1 Download DS Lighting System controller HD app from App Store Go to App Store and search for an app named DS Lighting System controller HD Download and install the app For instructions look your iPad user guide Apple and the Apple logo are trademarks of Apple Inc registered in the U S and other countries App Store is a service mark of Apple Inc 2 2 Choosing DS LED Lighting System Wi Fi network Choose DS LED Lighting System Wi Fi network from available networks You can see the DS LED Lighting System Wi Fi SSID on the PSU screen 1 3 2 Settings Wi Fi Wi Fi Choose a Network DS az Do Not Disturb V DS Light ta Notifications Other gt ETA DS LED Lighting System Wi Fi module default IP address is 1 2 3 4 Connected client iPad can get IP address in the range of 1 2 3 14 to 1 2 3 20
12. h Wi Fi e iPad iOS version 6 1 or later Apple the Apple logo iPad and iPhone are trademarks of Apple Inc registered in the U S and other countries App Store is a service mark of Apple Inc 1 1 2 Lighting hardware requirements e DSLED Lighting System PSU power supply unit e DSLED Lighting System Wi Fi module 1 2 App description App s aim is to provide a user friendly controller for the DS Led Lighting System DS LED Lighting System can be operated by using the buttons on PSU or by using an iOS app that connects with DS LED Lighting System over Wi Fi connection App has the same options for changing light as PSU however app controls are more intuitive on big screen App has additional features like presets and lighthead status overview App features e Group lightheads in different channels e White RGBW or RGB wheel touchscreen controls for every channel e Six preset buttons for saving color settings e Status view of all connected Power Supply Units PSUs e Satus view of all connected LED lightheads e Temperature lighthead cooling fan RPM and Uptime display for each LED lighthead e White settings color temperature 1500 10000K intensity 0 100 and tint 30 30 RGBW settings red 0 100 green O 100 blue O 100 white O 100 RGB wheel settings RGB color wheel with intensity slider Save scene all color and channel assignment data Load scene all color and channel assignment data Lighting syste
13. lor that is under users fingertip Intensity slider under the color wheel lets adjust selected RGB values selected point on the RGB wheel intensity together If intensity is O then lightheads are switched off Default value is O lightheads are switched off NB RGB wheel has only RGB components 17 3 6 Status view tab Lamps z RPM Up time h ERETTE Channels If lighthead button background is silver or blue it means that lighthead is connected If background is red lighthead is not connected to PSU Lighthead background indicates lighthead type e silver lighthead with RGBW leds e blue lighthead with white leds only Status view lets user group lightheads into channels To group lightheads into a channel tap the channel button and then tap a connected lighthead Lighthead button number will then change to selected channel If needed it is possible to add more lightheads to the same channel by tapping other connected lighthead buttons lf user wants to find out where lighthead is and identify it user can tap lighthead button until button shows letter F flashing Lighthead starts flashing signaling its location To stop flashing tap lighthead button again Each PSU has three lightheads PSU lighthead buttons starting from left First is lighthead 1 next is lighthead 2 and lasti is lighthead 3 1 3 2 PSU lighthead ports numbering 18 On the picture you can see five columns of data about PSUs 1
14. m error management 1 3 DS LED Lighting System hardware description DS LED Lighting System set consists of PSU three lightheads Wi Fi module and other hardware This short description explains hardware basics that user must know to use iPad app 1 3 1 Wi Fi module and possible connection modes DS LED Lighting System PSU with Wi Fi module Wi Fi module is mounted on PSU unit Wi Fi module has to be correctly installed because application needs Wi Fi connection to communicate with PSU Wi Fi module can be used in MASTER or SLAVE mode In MASTER mode DS LED Lighting System Wi Fi module is working as a Wi Fi router and iPad can connect directly to DS LED Lighting System Wi Fi module Wi Fi iPad is directly connected to DS LED Lighting System Wi Fi module In SLAVE mode DS LED Lighting System Wi Fi module connects to third party Wi Fi router iPad also connects to third party Wi Fi router This setup enables iPad to control multiple DS LED Lighting System PSUs _ er a WiFi Three DS LED Lighting System Wi Fi modules connected to third party router 1 3 2 PSU lighthead ports numbering One PSU has three ports for lighthead cables Ports are numbered 1 to 3 from up to down Application enables user to control each lighthead color individually To achieve expected results user must understand correlation between physical PSU ports and ports displayed in application software 1 3 3 Wi Fi module configuration as MAST
15. odule is switched on This error appears if DS LED Lighting System PSU with Wi Fi module is switched off and iPad does not connect automatically to another available Wi Fi network If DS LED Lighting System PSU with Wi Fi module was switched off switch it back on and wait Connection should restore within 60 seconds If it does not happen check other troubleshooting options 4 1 4 Connection state does not change to connected If connection state stays Wi Fi to PSU error red then check WiFi module connection to PSU Check that there is no foreign objects or debris that interfere with PSU and Wi Fi module connection Make sure that Wi Fi module is secured to PSU with bolt connection If there is still no change in connection state use 4 3 if connection state stays Reconnecting yellow and application did not give any error messages with instructions how to resolve connection problems check that you are connected to DS LED Lighting System Wi Fi network and if you are use troubleshooting section 4 3 4 1 4 Wi Fi slave discovery mode does not discover Wi Fi modules and PSUs If SLAVE discovery mode is turned on and after 60 seconds there are no Wi Fi modules and PSUs visible on Status tab 26 tO Ol Check that DS LED Lighting System Wi Fi module s are in SLAVE mode and connected to third party router Check for error messages on PSU screen DS LED Lighting System PSU with Wi Fi module Check that iPad is connected to the
16. process spinner turns green Preset is saved To load a preset push preset button once Preset values will appear on the screen 14 3 3 White view tab Presets O Channels White view has three round knobs Drag your finger on the knob to change value 1 Temperature knob enables changing color temperature in the 1500 10000K range Default value 1500K Double tap is 3200K and triple tap is 5600K 2 Intensity knob enables intensity change from O to 100 Default intensity is 0 lightheads are switched off Double tap is 50 and triple tap is 100 3 Tint knob enables tint change in the 30 30 range Default value is 0 Double and triple tap are 0 19 3 4 RGBW view tab Presets W Channels 1 1 RGBW view has four round knobs for red green blue and white Drag finger on the knob to change value Each round knob represents its color Red knob enables red adjustment in the range 0 100 green knob enables green adjustment in the range 0 100 etc Default value for RGBW knobs is 0 Button in the center of the screen enables user to hide or unhide RGB knobs When user hides RGB knobs then user can control only white knob This mode is meant to be used with lightheads that have only white LEDs 16 3 5 RGB wheel view tab Presets Channels 1 RGB wheel has color wheel with red green and blue no white adjustment Drag finger on the wheel to change light color Magnifying glass shows the co
17. tton light setup 3 It opens pop up that enables user to load rename or delete selected saved data There is also selection Delete all that enables user to delete all saved data with one selection NB There is no undo option deleting is permanent If user selected load then all channel assignment and channel color data is loaded but lightheads color does not change automatically User must select White RGBW or RGB wheel tab to change lightheads to saved settings There is no limit how many times saved data can be loaded Because there is color transition from White tab to RGBW tab and from RGB wheel tab to RGBW tab user must select the tab that was used to set color before saving example if user changed color on RGBW tab and saved it and then after loading selected White tab then White tab saved color is transferred to RGBW tab overwriting the loaded RGBW tab data In this situation user should select RGBW tab after loading saved data If user selects wrong tab by mistake then user should load data again and then select correct tab 22 3 3 Preferences Preferences Wi Fi Save Scene Formats Europe Sales Contacts Channel assignment by Lamps Version Preferences allows user to change formats and channel assignment loading Two format options 1 Europe Status tab lighthead temperature in Celsius Save Scene save name date format dd mm yyyy 2 USA Status tab lighthead temperature in Celsius Save
Download Pdf Manuals
Related Search